Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

HYW-35 T5: Generating Rates

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

MODEL

HYW-35 T5
INDUSTRIAL RANGE
Open Skid
Powered by YANMAR

K3

WATER-COOLED

THREE PHASE

50 HZ

STAGE 2

DIESEL

Generating Rates
SERVICE PRP STANDBY
Power kVA 34 37
Power kW 27 30
Rated Speed r.p.m. 1.500 01
Standard Voltage V 240/415
Available Voltages V 220/380-230/400
Rated at power factor Cos Phi 0,8

HIMOINSA Company with quality certification ISO 9001


HIMOINSA gensets are compliant with EC mark which includes the following directives:

• 2006/42/CE Machinery safety.


• 2014/30/UE Electromagnetic compatibility.
• 2014/35/UE electrical equipment designed for use within certain voltage limits
• 2000/14/EC Sound Power level. Noise emissions outdoor equipment. (amended by 2005/88/EC)
• EN 12100, EN 13857, EN 60204

Ambient conditions of reference according to ISO 8528-1:2005 normative: 1000 mbar, 25ºC, 30% relative humidity.

Prime Power (PRP):


According to ISO 8528-1:2005, Prime power is the maximum power which a generating set is capable of delivering continuously whilst supplying a variable
electrical load when operated for an unlimited number of hours per year under the agreed operating conditions with the maintenance intervals and procedures
being carried out as prescribed by the manufacturer. The permissible average power output (Ppp) over 24 h of operation shall not exceed 70 % of the PRP.

Emergency Standby Power (ESP):


According to ISO 8528-1:2005, Emergency standby power is the maximum power available during a variable electrical power sequence,
under the stated operating conditions, for which a generating set is capable of delivering in the event of a utility power outage
or under test conditions for up to 200 h of operation per year with the maintenance intervals and procedures being carried out as
prescribed by the manufacturers. The permissible average power output over 24 h of operation shall not exceed 70 % of the ESP

G2 class load acceptance in accordance with ISO 8528-5:2013

HIMOINSA HEADQUARTERS:
Fábrica: Ctra. Murcia - San Javier, Km. 23,6 | 30730 SAN JAVIER (Murcia) Spain
Tel.+34 968 19 11 28 Fax +34 968 19 12 17 Fax +34 968 19 04 20 info@himoinsa.com www.himoinsa.com

Manufacture facilities:
SPAIN • FRANCE • INDIA • CHINA • USA • BRASIL • ARGENTINA

Subsidiaries:
ITALY | PORTUGAL | POLAND | GERMANY | SINGAPORE | UAE | MEXICO | PANAMÁ | ANGOLA | UK

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
MODEL

HYW-35 T5
INDUSTRIAL RANGE
Open Skid
Engine Specifications 1.500 r.p.m. Powered by YANMAR

ENGINE PRP STANDBY


Rated Output kW 30,7 34,1
Manufacturer YANMAR
Model 4TNV98GGEH
Engine Type 4-stroke diesel
Injection Type Direct
Aspiration Type Natural
Number of cylinders and arrangement 4-L
Bore and Stroke mm 98 x 110
Displacement L 3,319
Cooling System Coolant
Lube Oil Specifications SAE 3 class 10W30 / API grade CD,CF
Compression Ratio 18,5
Fuel Consumption Standby l/h 8,53
Fuel Consumption 100% PRP l/h 7,60
Fuel Consumption 75 % PRP l/h 5,70
Fuel Consumption 50 % PRP l/h 4,05
Lube oil consumption with full load g/kWh 0,27 02
Total oil capacity L 10,5
Total coolant capacity L 9
Governor Type Mechanical
Air Filter Type Dry
Inner diameter exhaust pipe mm 45

Generator
Generator
Manufacturer MECCALTE
Poles No. 4
Connection type (standard) Star-series
Mounting type S-3 11"1/2
Insulation Class H class
Enclosure (according IEC-34-5) IP23
Exciter system Self-excited, brushless
Voltage regulator A.V.R. (Electronic)
Bracket type Single bearing
Coupling system Flexible disc
Coating type Standard (Vacuum impregnation)

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
MODEL

HYW-35 T5
INDUSTRIAL RANGE
Open Skid
Powered by YANMAR

Application Data

Exhaust System
Maximum exhaust temperature ºC 550
Exhaust Gas Flow m 3/min 8,52
Maximum allowed back pressure mm H2O 1300

Necessary Amount Of Air


Intake air flow m 3 /h 134,42
Cooling Air Flow m3 /s 0,979
Alternator fan air flow m3 /s 0,09

Starting System
Starting power kW 2,3
Starting power CV 3,13
Recommended battery Ah 92 03
Auxiliary Voltage Vdc 12

Fuel System
Fuel Oil Specifications Diesel
Fuel Tank L 120

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
MODEL

HYW-35 T5
INDUSTRIAL RANGE
Open Skid
Dimensions Powered by YANMAR

Weight and Dimensions


(L) Length mm 1.850
(H) Height mm 1.500
(W) Width mm 780
Maximum shipping volume m3 2,16
(*)
04
Weight with liquids in radiator and sump kg 579
Fuel tank capacity L 120
Autonomy Hours 21
(*) (with standard accessories) STANDARD VERSION

Australia has the right to modify any feature without prior notice.
Weights and dimensions based on standard products. Illustrations may include optional equipment.
Technical data described in this catalogue correspond to the available information at the moment of printing.
Industrial design under patent.

Local Distributor

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
MODEL

HYW-35 T5
Control Panel M7 INDUSTRIAL RANGE
Open Skid
Powered by YANMAR

Control & Power Panel


1. CM Control Panel.
2. CP Power Panel.
3. On/Off Switch..
4. Emergency Stop.
5. Main Line Circuit Breaker for overload protection.
6. Main bus /hardwire connection panel with safety protection.

M7 Key-start control panel


The M7 device is a monitoring and control electronic system for electrical M7 controller allows to check the last 100 failures registered and a
engine generator sets . detailed information of the generator set of the last 10 failures.
The M7 device is a compact module place in the front panel that develops
the following features : • Generator set control. M7 controller keep the generator set in working
• User’s interface. The M7 controller provides information about the order, including engine control and electrical signal monitoring the
status of the generator set and, at the same time, allows the user to generator set, including engine and electrical signal. Every signal, sensor
interact with it; using M7 keyboard, user is able to configure the functions and actuator is connected to the rear part of the M device.
of the unit.

Generator set signals Engine signals Generator set outputs


- Phase to neutral voltage - Fuel reserve - Preheating
- Phase to Phase voltage - Oil pressure - Engine control (fuel output or stop pulse)
- Phase current - High coolant temperature - Crank output
- Frequency - Coolant level - Battery charging alternator excitation.
- Real, apparent and reactive power - Emergency stop - General warning output
- power factor - Battery charger alternator voltage
- Battery voltage
05

Optional Automatic Controller CEM7

The CEM7 is an Auto-start digital controller which is equipped on


Himoinsa generator sets,which is able to control the operation,
monitoring and protection of a generator-set.

Controller Display: Engine Alarms: Generator Alarms:


- Valtage between each Phase& Neutral - High coolant temperature - Over-load
- Valtage between Phases - Low oil pressure - Unbalanced voltage
- Current (amps) on each Phase - Emergency stop - Over-voltage
- Frequency - Battery charging alternator - Under-voltage
- Active, Aparent,& Reactive Power - Low coolant lewel - Over-frequency
- Power Factor - Over Speed - Under-frequency
- Instant Power (kwH) and Accumulative power - Under speed - Short-circuit
- Fuel level - Low fuel level by sensor - Inverse Power
- Oil pressure, coolant temperature - Battery low voltage - Asymmetry among phases
- Battery voltage, battery charging alternator voltage
- Engine Speed
- Hours running

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com
MODEL

HYW-35 T5
INDUSTRIAL RANGE
Open Skid
Powered by YANMAR

Generator set features


Engine
· Diesel engine
· 4-stroke cycle
· Water-cooled
· 12V electrical system
· Radiator with blower fan
· Water separator filter (visible level)
· Mechanical governor
· Dry air filter
· Hot parts protection
· Moving parts protection

Alternator
· Self-excited and self-regulated
· IP23 protection
· H class insulation

Electrical system
· Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
· 4-pole thermal magnetic circuit breaker
· Battery charger (standard on gensets with automatic control panels)
· Heating resistor (standard on sets with automatic control panels)
· Battery charger alternator with ground connection 07
· Starter battery/ies installed (cables and bracket included)
· Ground connection electrical installation with connection ready for ground spike (not supplied)
Optional : · Battery isolator

Open set version


· Steel chassis
· Emergency stop button
· Anti-vibration shock absorbers
· Chassis with integrated fuel tank
· Fuel level gauge
· Fuel tank drain plug
· Steel industrial silencer -15db(A) attenuation
Optional : · Fuel transfer pump
· Steel residential silencer -35db(A) attenuation.

Ctra. Murcia - San Javier, km. 23,6 | 30730 San Javier (Murcia) SPAIN | Tel.: +34 902 19 11 28 / +34 968 19 11 28
Fax: +34 968 19 12 17 | Export Fax +34 968 19 04 20 | E-mail:info@himoinsa.com | www.himoinsa.com

You might also like