Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 87 views

    Chapter 10

    Uploaded by

    Richelle Dando
    The document summarizes the design of an isolated square footing to support a column. Key steps include: 1) Calculating factored loads on the footing of 418.51 kN from the given structural members and loads. 2) Sizing the footing based on allowable soil bearing capacity of 101.56 kPa, resulting in a 2.03m x 2.03m square footing. 3) Determining the required footing depth of 430mm based on structural and geotechnical requirements. 4) Designing reinforcement with 4 bars of 25mm diameter, providing a steel ratio of 0.0064 to resist the bending moment.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Chapter 10

    Uploaded by

    Richelle Dando
    87 views5 pages
    The document summarizes the design of an isolated square footing to support a column. Key steps include: 1) Calculating factored loads on the footing of 418.51 kN from the given structural members and loads. 2) Sizing the footing based on allowable soil bearing capacity of 101.56 kPa, resulting in a 2.03m x 2.03m square footing. 3) Determining the required footing depth of 430mm based on structural and geotechnical requirements. 4) Designing reinforcement with 4 bars of 25mm diameter, providing a steel ratio of 0.0064 to resist the bending moment.

    Original Description:

    timber

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the design of an isolated square footing to support a column. Key steps include: 1) Calculating factored loads on the footing of 418.51 kN from the given structural members and loads. 2) Sizing the footing based on allowable soil bearing capacity of 101.56 kPa, resulting in a 2.03m x 2.03m square footing. 3) Determining the required footing depth of 430mm based on structural and geotechnical requirements. 4) Designing reinforcement with 4 bars of 25mm diameter, providing a steel ratio of 0.0064 to resist the bending moment.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    87 views5 pages

    Chapter 10

    Uploaded by

    Richelle Dando
    The document summarizes the design of an isolated square footing to support a column. Key steps include: 1) Calculating factored loads on the footing of 418.51 kN from the given structural members and loads. 2) Sizing the footing based on allowable soil bearing capacity of 101.56 kPa, resulting in a 2.03m x 2.03m square footing. 3) Determining the required footing depth of 430mm based on structural and geotechnical requirements. 4) Designing reinforcement with 4 bars of 25mm diameter, providing a steel ratio of 0.0064 to resist the bending moment.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    CHAPTER 10

    DESIGN OF FOOTING
    Dando, Richelle Ghay A. BSCE-IV April 4, 2019

    DESIGN OF ISOLATED FOOTING

    Dead Load

    Live Load

    Wind Load
    Truss Reaction

    Analyzed

    Grasp Results

    Mz.i Mz.pos Mz.j Fx.i Fx.j


    Member Fy.i [KN] Fy.j [KN]
    [KN-m] [KN-m] [KN-m] [KN] [KN]
    B-1 -6.0782 4.6866 -12.974 12.284 -15.732 -12.514 -12.514
    B-2 -8.425 4.611 -10.369 13.522 -14.494 -9.8524 -9.8524
    B-4 -17.459 20.9438 -45.693 44.5654 -58.683 -12.647 -12.647
    B-5 -33.604 19.0626 -31.519 52.1454 -51.103 -8.7653 -8.7653
    C-3 7.1647 8.4102 -6.0782 3.6857 -12.514 -144.41 -137.93
    C-6 -7.7086 0 -10.294 7.2383 -8.9617 -195.46 -188.98
    C-7 -3.4367 4.5491 4.5491 2.6619 2.6619 -35.734 -29.254
    C-8 -10.98 8.6519 8.6519 6.544 6.544 -153.04 -146.56
    C-10 -11.943 10.3691 10.3691 5.0224 9.8524 -180.46 -173.98
    C-11 -14.543 19.5754 19.5754 8.9577 13.7877 -238.05 -231.57
    GIVEN:

    Column size (400mm × 400mm)


    Windward Wall = 1.35 (4) = 5.4 kN/m
    Leeward Wall = -0.402 (4) = -1.61 kN/m

    2030 mm
    PU = 180.46 + 238.05 = 418.51 kN

    qa = 140 kPa 𝛶C = 23.6 kN/m3


    hfooting = 2m 𝛶S = 18 kN/m3
    f’c = 28 MPa fy = 414 MPa

    (use 25 mm diameter for main bars) 815-d

    Initial estimate of footing depth: 1015 mm


    (418.51) Based on wide beam shear:
    𝐴𝑓𝑜𝑜𝑡𝑖𝑛𝑔 = L2 = 140
    Vu = qu Ashaded
    L= 1.73 m ≈ 1730 mm = (0.10156) [2030(815– d)]
    Depth= 20% (1730) + 75 = 421 mm say 430 = 206.17(815 – d) N
    mm
    𝑉𝑐 = 0.17𝜆√𝑓 ′ 𝑐 𝑏𝑊 𝑑
    Effective soil bearing capacity: = (0.17)(1)√28 (2030)(d)
    qe = qa – 𝛶c hc - 𝛶S hs 𝑉𝑐 = 1826.1𝑑 N
    =140 – 23.6(0.43) – 18(2– 0.43)
    qe = 101.592 kPa [Vu = ϕ VC]
    206.17(815-d) = 0.75 (1826.1𝑑)
    Dimension of the footing: d = 106.63 mm
    P 418.51
    𝐴𝑓𝑜𝑜𝑡𝑖𝑛𝑔 = = = 4.12 m2
    𝑞𝑒 101.592
    4.12 mm2 = L × L
    L = 2.03m
    Footing dimension= 2.03m x 2.03m
    2030 mm

    2030 mm

    2m Based on two-way or punching shear:


    Vu = qu Ashaded
    = (0.10156) [(2030)2 - (400+d)2 ]
    = (0.10156) (20302 – 160000 - 800d - d2)
    Vu = 0.10156(3960900 - 800d - d2) N

    Depth of footing: 𝑉𝑐 = 2(0.17𝜆√𝑓 ′ 𝑐 𝑏𝑜 𝑑)


    Factored Load 418.51
    𝑞𝑢 = = 𝑏𝑜 = 4(400 + 𝑑)
    Area of footing 2.03(2.03) = 2(0.17)(1)√28[4(400 + 𝑑)] 𝑑
    𝑞𝑢 = 101.56 kPa = 0.10156 MPa
    𝑉𝑐 = 7.2 (400𝑑 + 𝑑 2 )

    Vu = ϕ VC
    0.10156 (3960900 - 800d - d2) = 0.75
    [7.2 (400𝑑 + 𝑑 2 )]
    d = 134.85 mm “say” 150 mm
    0.85(28) 2(2.51)
    1.015 m = [1 − √1 − 0.85(28)]
    414
    .815 m ρ = 0.0064

    1.4 1.4
    𝜌min = 𝑓𝑦 = 414 = 0.0034

    Use ρ = 0.0041
    mm
    150

    As = ρbd
    = (0.0064) (2030) (150)
    As = 1948.8 mm2
    101.56 kPa
    Total depth of footing= 140 – 75 – 1.5(25) Number of 25 mm bars:
    𝜋
    Total depth = 27.5 mm < 430 mm (OK!) (25)2 (N) = 1948.8 mm2
    4
    N = 3.97 “say” 4 bars
    Required Steel Area:
    d = 150 mm Development Length:

    Mu = (101.56) (1) (2.03) (1/2)


    1 𝑓𝑦 𝛹𝑡 𝛹𝑠 𝛹𝑒
    = 103.08 kN•m Ld = ( 𝑐𝑏+𝐾𝑡𝑟 ) 𝑑𝑏
    1.1 𝜆 √𝑓 ′ 𝑐 ( )
    𝑑𝑏

    Mu = ϕ Ru bd2 1 (414)(1)(1)(1)
    103.08 ˣ 106 = 0.90Ru (2030) (150)2 Ld = ( 1.1(1)√28 (2.5) ) (25) = 711.26 mm
    Ru = 2.51 MPa
    Minimun Ld furnished: 815 + 400 – 75 =
    0.85𝑓 ′ 𝑐 2𝑅𝑢 1140 mm (OK!)
    𝜌= [1 − √1 − ]
    fy 0.85𝑓 ′ 𝑐

    You might also like