ROTTNE f18

Comfort and capacity in top class!

F18
New forwarder cab
The newly-developed cab features an extremely modern
design where the operator actually sits in the centre. The
large windows and low-set instrument panel provide an Rottne D5
uninterrupted view of the immediate and overhead sur-
roundings. The cab, in which it is possible to stand up, is The Rottne D5 machine control system, which is based on CAN bus
extremely spacious and well insulated to ensure low noise technology, controls and monitors the engine, transmission and
levels. The air conditioner, with filters for both fresh air loader. D5 comprises a main computer, a 7” colour touch screen, and
and recirculated air, has a high fan capacity and 16 air inlet a number of nodes set out on the machine close to the function to
vents in the lower part of the cab, as well as adjustable be controlled. The main computer communicates by means of a CAN
vents in the roof. bus cable linked to all the nodes.
The air-cushioned operator’s seat is equipped with Airvent The operator can adjust settings for the loader, transmission and
and infinitely adjustable armrests. The lever panels with engine, monitor pressure, temperatures and fluid levels and perform
function buttons and the settings and monitoring display troubleshooting using the display (touch screen) in the armrest.
for the machine control system are incorporated into the Alarms are indicated by visual and audible signals and are displayed
armrests, so that they move when the seat moves. Inte- in clear text on the display.
grated into the panels of the cab are a number of storage Operator station with fantastic view and comfort
compartments as well as a heated compartment for a
lunch box.

Well designed
New design Rottne F18 has a well-balanced power train with a diesel engine that
can be run at low working engine speed, as it achieves maximum
torque between 1,000 and 1,500 rpm. The transmission is hydrostatic
with two hydraulic motors in a 3-speed automatic gearbox that allows
gear changing when moving fully loaded, and with a tractive force of
22 tons a high speed can be maintained even at maximum load.
The portal bogies, with large wide wheels, provide excellent bear-
ing capacity and smooth and gentle travel. The wagon is available in
two frame lengths and the load area has a low centre of gravity. The
hydraulically-controlled gate allows the wagon to be adapted for short
timber lengths for optimum weight distribution and stability. Bunks for
a width-adjustable load area are available as an optional extra.
The operator environment is superb thanks to the light, spacious
and quiet cab that also offers excellent visibility. The ergonomically-
designed lever panels feature all the functions used most frequently,
which means that hauling work can be performed safely and smoothly.
Rottne f18 - new technology, first class comfort and functions

The CAN bus-based Rottne D5 machine control system

has small yet robust units for demanding environments
and controls all electronic equipment on the machine.
The operator controls the system and is kept informed
of its status via a colour touch screen in the armrest.
The system permits personal settings for the loader
and transmission for up to 5 different operators, which
speeds up shift changes.
The electrical system also uses modern CAN bus
technology, providing considerable benefits in terms of
wiring in narrow conduits, as the fewer wires there are The hydraulic tank is folded out at filter change
the simpler the wiring. In addition, the position of the
distribution box in the side wall of the cab has been Nowadays, almost all forestry machines use synthetic oil in their hydraulic systems.
optimised, as fuses can be checked/replaced from the However, this type of oil is sensitive to aeration. To counteract this problem, Rottne
operator station. However, all servicing of the box is has developed a system where the return filters always remain below the oil level.
performed via an access panel on the outside of the This system has been used to good effect in Rottne’s harvesters for a number of
cab. years, so it has now been incorporated into Rottne F18. When you need to replace
the filters, the hydraulic tank can be tipped and lowered to one side by an electri-
The newly-developed forwarder cab easily satisfies the
cally-powered function so that the filters are on top. The hydraulic system, which is
ergonomic guidelines that apply to forestry machi-
load sensing, employs decentralized valves, yielding lower average pressure in the
nes. Rottne has become the first manufacturer in the
system and thus lower fuel consumption.
industry to make a huge breakthrough in reducing
As safety is a top priority, on most markets the machines are equipped with
vibrations in the cab by means of the Comfort Line
reversing cameras. On forwarders there is one camera on the front of the cab and
gas/hydraulic cab suspension system, which is now
a second on the back of the wagon. The driving direction automatically determines
available as an optional extra.
which camera is active, and when the machine is in motion the picture is shown on
The system is activated by a button once the engine the D5 display in the armrest.
has been started. This raises the cab approimately 5 Loose tools and other objects on the cab floor are a hazard, but are still a common
centimetres to ensure suspension movement, after sight when little storage space is available. The cab of the F18 has a number of
which point the suspension functions automatically storage compartments integrated into the instrument panels, and there is also a
until the engine is switched off. heated compartment for a lunch box.
 Service access
Serviceability is an important factor during development
work on all Rottne machines. Downtime can prove
expensive for machine owners and good service access
can significantly reduce the time needed for servicing,
repairs and cleaning. Rottne F18 is no exception in
this respect. It takes only a few minutes to access all
areas of the machine. The engine and transmission are
revealed by tilting the engine hood forwards and tipping
the cab sideways hydraulically. The front and rear belly
plates have hinges mounted under the front bogie, and
the entire underside opens when these are lowered.
Troubleshooting on the electrical system can largely
be carried out via the D5 system’s operating screen.
The loader has been designed to include numerous
lubrication-free bearings and therefore requires minimal
maintenance. A vacuum pump for the hydraulics and fil-
ling equipment for hydraulic oil and diesel are available
as optional extras.

Large forwarder
Rottne F18 is a large forwarder that really comes into
its own when the forwarding involves rough terrain,
heavy forest and long hauling distances. With an
18-ton load capacity and the possibility of a width-
adjustable load area, F18 can always be utilised to
maximum capacity, ensuring low running costs. The
forwarder has a stable frame design and a strong
articulated joint with integrated articulated frame lock
and a double-row slewing ring in the horizontal joint.
The wagon frame is slightly tapered from the bogie
forwards, giving a few centimetres of extra ground
clearance under the articulated joint.
The bogies are portal type with hub reductions and
have large bogie angle movements that, together
with large wide wheels, provides excellent ground
clearance. The load bunks are bolted to the frame
and can be fitted in different positions depending on
timber length. The new forwarder loader, RK 160, is
very powerful and, with a reach of 8.5 metres, is ideal
for the large Rottne F18 forwarder, offering first-rate
The service access is extremly good.
performance.
 Forwarder computer
Communication between forwarder and harvester and
with principals and landowners is becoming increasingly
important. To satisfy this requirement, a forwarder com-
puter comprising a computer and colour touch screen is
available as an optional extra. A GSM telephone and a GPS
receiver with GIS software can be linked to this.
This equipment enables the harvester’s production files
and tract maps with working routes to be transmitted to
the forwarder to ensure that all felled timber is collected.
Software is also available for reporting the daily produc-
tion of forwarders with coordinates for the position of
roadside timber stacks.
An advanced operations follow-up program is also avai-
lable for anyone wanting more detailed follow-up on times
for loading, unloading, transport, servicing and repairs, etc.

2070-2812/81-111” 1936/76”
3794/149”

3776/149”

50 x2 6 50 x2 6
7
7

,5

,5
773/30”

2030/78” 3795/149”
3050/120”
4679/189”
10717/422”
 Technical data
Eco - friendly engine ENGINE
JOHN DEERE 6090 HF 485 Power Tech Plus Tier 3
Rottne F18 has a powerful 6-cylinder Tier 3 Cylinder volume.……………….……9.0 litres (549 in³)
eco-friendly engine that comfortably fulfils Torque at 1,500 rpm.. ……………...1 095 Nm (808 lbf ft)
applicable emission requirements for current Output at 1,800 rpm.………………..187 kW (250 hp)
diesel engines. Tank capacity ...............................210 litres (55 US gal)
Electrically-controlled cooling fan
The engine is named Power Tech Plus, and TRANSMISSION
it has, among other things, modern 4-valve D5-controlled, hydraulic/mechanical with load regulation
technology, a common rail injection system 3 speed automatic hydrostatic transmission with double hydraulic
and a variable turbocharger, which provides motors
excellent responsiveness with rapid power Tractive force……………………..220 kN (49 450 lbf)
Speed……………………….........0 - 25 km/h (15,5 mph)
output.
WHEEL EQUIPMENT
This technology and electronic means of 750/55 x 26.5/20 F SF or
control enables the power curve and torque 750/45 x 30.5” T428 SB
to be adapted to the optimum rpm range for HYDRAULIC SYSTEM
forwarders. The forwarder can therefore be Load-sensing constant pressure system, entirely separate from the
transmission. Return and leakage oil filters, installed below the oil level.
operated at a slightly lower working engine Fine filter circuit with water separation. Decentralised valve system.
speed, resulting in a lower noise level, less Capacity.................270 litres/1,500 rpm (71 US gal)
vibrations and, most importantly, lower fuel Working pressure....3 - 22 MPa (440-3200 psi)
consumption. CHASSIS
Welded frame structure with a ball-race-type articulated joint and
articulated frame lock.
Welded bunks screwed to the wagon frame.
Front gate/front bunks hydraulically adjustable 75 cm (29 in) backwards
and gate height adjustable by 40 cm (16 in).
Width-adjustable load area as an optional extra.
Load area……………5.3 - 6.5 m2 (57-70 sq in)
CAB
New forwarder cab certified for ROPS, FOPS, OPS
Noise level…………..69 dBA
ELECTRICAL SYSTEM AND CONTROL ELECTRONICS
24-volt electrical system with Rottne D5 control system.
Work lighting ............................20 pcs
LOADER
RK 160
Knuckle boom loader with double slewing cylinders,
2.2 m (7.2 ft) extension and 0.40-type grapple
Lifting torque…………156 kNm (115 100 lbt ft)
Torque…………………45 kNm (33 200 lbf ft)
Angle of rotation……..370º
Reach…………………..8.5 metres (28 ft)
WEIGHT & CARRYING CAPACITY
Service weight……..22,000 - 23,200 kg (48 500-51 150 lb)
Load capacity……..18,000 kg (39 700 lb)
EQUIPMENT
Engine/cab heater with heating coil for hydraulic tank.
Sprinkler. Green oil. Reversing camera. Xenon working light. Sunblinds.
Specifications and equipment are subject to alteration. Mobile telephone. Dozer blade. Wide Load width-adjustable load area.
Images do not always show the machine in its standard design. Comfort Line cab suspension. Forwarder computer. GPS/Gis.
ROTTNE F18 - large forwader with strong power train and loader
Rottne Industri AB
www.rottne.com