Buffer Solution, PH 7.00/CLEAR MSDS: Section 1: Chemical Product and Company Identification
Buffer Solution, PH 7.00/CLEAR MSDS: Section 1: Chemical Product and Company Identification
Buffer Solution, PH 7.00/CLEAR MSDS: Section 1: Chemical Product and Company Identification
0 0
Fire
1 0
Re a c t iv it y 0
P e rs o n a l B
P ro t e c t io n
Toxicological Data on Ingredients: Potassium phosphate monobasic LD50: Not available. LC50: Not available.
Potential Acute Health Effects: Slightly hazardous in case of skin contact (corrosive, irritant), of eye contact (irritant), of
ingestion, of inhalation.
Potential Chronic Health Effects: Non-corrosive for skin. Non-irritant for skin. Non-sensitizer for skin. Non-permeator by
skin. Non-irritating to the eyes. Non-hazardous in case of ingestion. Non-hazardous in case of inhalation. CARCINOGENIC
EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
p. 1
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.
Cold water may be used.
Serious Skin Contact: Not available.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get
medical attention.
Serious Inhalation: Not available.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such
as a collar, tie, belt or waistband.
Serious Ingestion: Not available.
Small Spill: Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal
container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional
authority requirements.
Large Spill: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by
spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Precautions: Keep container dry. Do not breathe gas/fumes/ vapor/spray. Avoid contact with skin. Never add water to this
product. Wear suitable protective clothing. If you feel unwell, seek medical attention and show the label when possible.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
p. 2
Engineering Controls: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of
vapors below their respective threshold limit value.
Personal Protection: Safety glasses. Lab coat. Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might
not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits: Not available.
p. 3
Section 11: Toxicological Information
Waste Disposal:
Federal and State Regulations: Pennsylvania RTK: Sodium hydroxide Massachusetts RTK: Sodium hydroxide TSCA 8(b)
inventory: Potassium phosphate monobasic; Sodium hydroxide; Water
Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
Other Classifications:
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC): This product is not classified according to the EU regulations.
HMIS (U.S.A.):
Health Hazard: 1
Fire Hazard: 0
Reactivity: 0
p. 4
Personal Protection: b
National Fire Protection Association (U.S.A.):
Health: 1
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment: Gloves. Lab coat. Not applicable. Safety glasses.
The information above is believed to be accurate and represents the best information currently available to us. However, we
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume
no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for
their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for
lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com
has been advised of the possibility of such damages.
p. 5