Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Skill Test On TDK Sensor Plate

    Uploaded by

    Darshan
    This document contains a 10 question training test for the final process department. The questions cover various manufacturing steps like checking for warping using a feeler gauge, using a hairline machine to add markings, checking threads with plug gauges, buffing sharp edges, setting up a laser punching machine, and verifying there are no sharp edges on parts. The test is to evaluate understanding of the manufacturing processes and instructions for producing TDK sensor plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Skill Test On TDK Sensor Plate

    Uploaded by

    Darshan
    39 views2 pages
    This document contains a 10 question training test for the final process department. The questions cover various manufacturing steps like checking for warping using a feeler gauge, using a hairline machine to add markings, checking threads with plug gauges, buffing sharp edges, setting up a laser punching machine, and verifying there are no sharp edges on parts. The test is to evaluate understanding of the manufacturing processes and instructions for producing TDK sensor plates.

    Original Description:

    jy

    Original Title

    Skill Test on TDK Sensor Plate

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a 10 question training test for the final process department. The questions cover various manufacturing steps like checking for warping using a feeler gauge, using a hairline machine to add markings, checking threads with plug gauges, buffing sharp edges, setting up a laser punching machine, and verifying there are no sharp edges on parts. The test is to evaluate understanding of the manufacturing processes and instructions for producing TDK sensor plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    39 views2 pages

    Skill Test On TDK Sensor Plate

    Uploaded by

    Darshan
    This document contains a 10 question training test for the final process department. The questions cover various manufacturing steps like checking for warping using a feeler gauge, using a hairline machine to add markings, checking threads with plug gauges, buffing sharp edges, setting up a laser punching machine, and verifying there are no sharp edges on parts. The test is to evaluate understanding of the manufacturing processes and instructions for producing TDK sensor plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FINAL PROCESS DEPARTMENT TRAINING

    TEST TITLE : TDK SENSOR PLATE

    NAME : _______________________

    ID NO.: ______________________ TOTAL MARKS : ____________

    Tick the correct answer

    1)

    Hairline done and ready to


    outsource process for
    anodizing process.

    Marks /10

    2)
    Place the part at granite table
    table and check the part's warp
    condition using feeler gauge.
    Warp requirement not more
    than 0.30mm gap.

    Marks /10

    3)
    Choose the hairline machine.
    Time Saver TS-2200. Refer CSY
    MP-W40 for hairline process
    instruction.

    Marks /10

    4)
    Check the thread by use thread
    limit plug gauge GO & NO GO, Marks /10
    size : M3/M4. Refer CSY MP-W68
    for the work instruction.

    Marks /10
    5)
    Buffing Process
    Buff the sharp edge that come
    from cutting starting point.

    Marks /10

    6)
    Final Checking
    Thread checking use megnifier
    glasses to ensure no thread
    missing
    Marks /10

    7)
    Setting the laser punching
    machine (Acies machine) and
    start cut the plate.

    Marks /10

    8)
    Punch done and ready for
    buffing process

    Marks /10

    9)

    Check the part, ensure no


    sharpe edge.

    Marks /10

    10)

    Laser Punching Process


    Material A5052,
    Thickness 3.00mm

    Marks /10

    You might also like