University of Agricultural Sciences, Dharwad

Question paper format
UNIVERSITY OF AGRICULTURAL SCIENCES, DHARWAD

Course No. & Course Title: FEG 301 Food Process Equipment Design
FINAL THEORY EXTERNAL EXAMINATION
Year: 2018-19 Semester: I Degree Programme: _______
Duration: 2.00 Hrs. Date: Max. Marks: 50.00
Part A
I Choose correct answer 0.5 X 25=12.5
1. Hooke’s law holds good upto
(a) Yield point (b) Elastic limit
(c) Plastic limit (d) Breaking point
2. In a body, a thermal stress is one which arises because of the existence of
(a) Latent heat (b) Temperature gradient
(c) Total heat (d) Specific heat
3. A localised compressive stress at the area of contact between two members is known as
(a) Tensile stress (b) Bending stress (c) Bearing stress (d) Shear stress
4. Factor of safety for the brittle type of material is upto
a) Yield stress b) Ultimate stress
c) Bending Stress d) Elastic limit
5. The maximum energy that can be stored in a body due to external loading upto the elastic
limit is _____________
(a) Resilience (b) Proof resilience
(c) Strain energy (d) Modulus of resilience
6. Principal stress has _______________
(a) Maximum shear (b) Minimum shear
(c) Medium shear (d) No shear
7. For high pressure oil and gas cylinders, the thickness of the cylinder is determined by
(a) Lame’s equation (b) Clavarino’s equation
(c) Barlow’s equation (d) Birnie’s equation
8. A pressure vessel is said to be a thin cylindrical shell, if the ratio of the wall thickness of the
shell to its diameter is
(a) Equal to 1/10 (b) Less than 1/10
(c) More than 1/10 (d) None of these
9. The longitudinal stress is ...... of the circumferential stress
(a) One-half (b) Two-third (c) Three-fourth (d)Equal
10 The resistance to fatigue of a material is measured by
(a) Elastic limit (b) Young's modulus
(c) Ultimate tensile strength (d) Endurance limit
11 Rankine’s theory is used for
(a) Brittle materials (b) Ductile materials
(c) Elastic materials (d) Plastic materials
12 Guest’s theory is used for
(a) Brittle materials (b) Ductile materials
(c) Elastic materials (d) Plastic materials
13 Brass is a metallic alloy mainly made of
(a) Cupper and zinc (b) Cupper and tin
(c) Cupper and lead (d)Cupper and cadmium
14 Bronze is a metallic alloy mainly made of
(a) Cuper and zinc (b) Cupper and tin
(c) Cupper and lead (d)Cupper and lead
15 Medium carbon steel contains
(a)0.15 -0 .5 % of carbon (b) 0.5-1.0 % of carbon
(c) 0.5 - 2.0 % of carbon (d) 2 to 2.5 % of carbon
16 Hastelloys is a alloy made of
(a) Copper and Chromium (b) Copper and Nickle
(c) Copper and Molybdenum (d) Copper and Cadmium
17 __________________ is the example of thermo plastic
a) PVC b) Phenol formaldehyde c) Polyester d) Silicone
resins
18 The concept of overall coefficient of heat transfer is used in heat transfer problems of
(a) Conduction (b) Cconvection (c) Radiation (d) Conduction and Convection
19 Effectiveness-NTU Relations for all heat exchangers if C* = 0
a) εE = 1-exp(-NTU) b) εE = 1-exp(NTU) c) εE = 1+exp(-NTU) d) εE = 1+exp(NTU)
20 In single effect evaporator, the economy is
a) =1 b)>1 c)<1
d)≤1
211) The amount of water evaporated by using 1 kg of steam is called
a) Evaporator efficiency b) Boiling efficiency c)Steam ratio d) Steam economy
222) Thermal conductivity is expressed as
3) a) w/mk b) w/m2k c) w/hmk d) w/h2m2k
23 Expression suitable for plate heat exchanger
a)Nu = 0.4 Re0.4 Pr0.64 b)Nu = 0.4 Re.64 Pr0.4
c)Nu = 0.64 Re.64 Pr0.4 d) Nu = 0.64 Re.04 Pr0.64
241) Mechanical recompression involves the use of a ___________ to recompress part of the exit
vapors
2) a) Pump b) steam jet booster c) Cylinder d) Pressure vessel
25 Which of the following material has the maximum ductility
(a) Mild steel (b) Copper
3) (c) Zinc (d) Aluminium
Q. II State whether the following statements are TRUE or FALSE 0.5 x 15 = 7.5
26. The silicon steels behave like nickel steels.
27. Percent Elongation is the percentage increase in the standard gauge length
28. Fabricated nozzles are essential short pieces of pipes, tubes and plates.
29. A load is said to be a dead or steady load, when it does not change in magnitude or
direction.
30. Hooke's law states that when a material is loaded within elastic limit, the stress is
directly proportional to strain
31. Ductile materials usually fail by yielding
32. In belt conveyor, there is no relative motion between the product and belt
33. The rotation of screw pushes the grain along the trough.
34. The ratio of the endurance limit for reversed stresses to ultimate static stress is known
as endurance ratio
35. Highly viscous liquids and pastes are agitated by multiple blade paddles.
36. Formed nozzles are fabricated to specific shape and size, preferably with flanges.
37. Mixing by agitators takes place due to momentum transfer.
38. Elastic limit is the maximum stress indicated by the point

39. Carbon percentage in high carbon steel is 0.50 to 2.0 %
40. Chromium iron is resistance to heat, wear and corrosion
Q. III Match the following 0.5 x 10 = 5.0
A B
41. Ratio of stress to strain A Modulus of rigidity
42. Ratio of linear stress to linear strain B Volumetric strain
43. Ratio of shear stress to shear strain C Young’s modulus
44. Ratio of direct stress to volumetric strain D Stress concentration factor
45. Ratio of change in the volume to original volume E Poisson’s ratio
46. Ratio of maximum stress to nominal stress F Bulk modulus
47. Ratio of the endurance limit for reversed stresses G Tensile stress
to ultimate static stress
48. science of fermentation H zymology
49. Force tending to tear it apart I Endurance ratio
50 Mixing by agitators J momentum transfer
Part B
Q. IV. Define or answer the following in one or two sentences 1.0 x 5 = 5.0
1. Centrifugation
2. Fermentation
3. Extrusion
4. Stress and Strain
5. Resiliance
Q. V. Write short note (Any Five) 2.0 x 5 = 10.0
1. Mention the different types of agitators and explain any two?

2. Write the source of hazards?
3. Explain Effectiveness-NTU Method for designing Heat Exchangers
4. Write factors required for the design of heated air grain dryers?
5. Explain the working of single screw extruder?
6. Explain the stress – strain diagram with a neat sketch
7. Write the theories of failure under static condition
Q.VI. Answer the following questions (Any Two): 5.0 x 2 =10.0
1. Find the thickness for a tube of internal diameter 100 mm subjected to an internal pressure
which is 5/8 of the value of the maximum permissible circumferential stress. Also find the
increase in internal diameter of such a tube when the internal pressure is 90 N/mm2. Take E
= 205 kN/mm2 and μ = 0.29. Neglect longitudinal strain.
2. Write about classification of Heat exchangers and explain any two
3. Explain screw and belt conveyor with neat diagram
4. A Screw conveyor of 20 t/h capacities is required in pulse milling industry for
transportation of piegionpea grain with bulk density 850 kg/m3 to a horizontal distance of
16.5m. An angle of material friction with screw and trough surfaces is 190 and angle of
internal friction of grain is 23.50 If the screw speed is limited to 33 rpm, determine the
screw diameter and mean particle velocity in the conveying direction. Assuming screw
assembly weight as 12 kg/m, bearing friction co-efficient as 0.025, shaft diameter 50 mm
and transmission efficiency as 75%, determine the hp requirement at drive shaft and that of
prime mover with 80% efficiency

University of Agricultural Sciences, Dharwad

Uploaded by

Copyright:

Available Formats

University of Agricultural Sciences, Dharwad

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

University of Agricultural Sciences, Dharwad

Uploaded by

Copyright:

Available Formats

Question paper format

UNIVERSITY OF AGRICULTURAL SCIENCES, DHARWAD

26. The silicon steels behave like nickel steels.

37. Mixing by agitators takes place due to momentum transfer.

38. Elastic limit is the maximum stress indicated by the point

40. Chromium iron is resistance to heat, wear and corrosion

Q. III Match the following 0.5 x 10 = 5.0

Q. V. Write short note (Any Five) 2.0 x 5 = 10.0

1. Mention the different types of agitators and explain any two?

Q.VI. Answer the following questions (Any Two): 5.0 x 2 =10.0

You might also like