See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/317338046

IOT Based Smart Greenhouse Automation Using Arduino

Article · March 2017

DOI: 10.21276/ijircst.2017.5.2.4

CITATIONS READS

10 4,426

5 authors, including:

D.O. Shirsath
Padmabhooshan Vasantraodada Patil Institute of Technology
2 PUBLICATIONS   10 CITATIONS   

SEE PROFILE

All content following this page was uploaded by D.O. Shirsath on 18 February 2019.

The user has requested enhancement of the downloaded file.

 International Journal of Innovative Research in Computer Science & Technology (IJIRCST)
ISSN: 2347-5552, Volume-5, Issue-2, March 2017
DOI: 10.21276/ijircst.2017.5.2.4

IOT Based Smart Greenhouse Automation

Using Arduino
Prof. D.O.Shirsath, Punam Kamble, Rohini Mane, Ashwini Kolap, Prof.R.S.More

Abstract— Greenhouse Automation System is the technical digitals to made read data sensor easy to take
approach in which the farmers in the rural areas will be temperature, humidity, CO2 gas, also measuring the soil
benefitted by automatic monitoring and control of greenhouse moisture that needed for irrigation plants and the intensity of
environment. It replaces the direct supervision of the lights that applied for greenhouse . These factors has the
human. In this paper the different papers have been
major effect on increase in growth of plants. Greenhouse
reviewed and developed the proposed system based on the
limitation in the present monitoring system. It also focuses
environments monitoring different changes to parameters,
on the Generic Architecture which can be applied for many the system for this purpose had been provided and given
other Automation Application. Greenhouse is a building ability to control on climate of greenhouse.
where plants are grown in a controlled manner. Nowadays The crop agriculture in greenhouse is higher
due to urbanization and lack of land availability there is a affected by the surrounding conditions. The significant
great need to construct the Greenhouses which will be environmental factors for the quality and better productivity
reserved mainly for growing crops. With the advancement of of the plants growth are temperature, relative humidity,
technology we can control and monitor the multiple Lighting, moisture soil, and the CO2 amount in
Greenhouses using IOT from the central location wirelessly.
greenhouse. Continuous monitoring of these factors gives
relevant information pertaining to the individual effects of
Keywords— Arduino ATmega328, Atmospheric sensors, DC
motor controlled sprinkler system.IOT.
the various factors towards obtaining maximum crop
production [J. H. Shin et al., 1998]. Arduino is an
open-source electronics prototyping platform based on
I. INTRODUCTION flexible, easy-to-use hardware and software. It's intended
for artists, designers, hobbyists, and anyone interested in
In this paper, the Design had been aimed data acquisition in creating interactive objects or environments. [David et
greenhouse for multiple sensors to use data for simulation or al., 2007]. Arduino can sense the surroundings by receiving
processing to achieve the better enhancement of growth in input signal from a variety of sensors and can affect its
greenhouse, this data has effect on the climate of environment via controlling heater, Water pump, and other
greenhouse. Graphical User Interfaces (GUI) had been actuators. The AVR Atmega2560 on the board is
used through LabVIEW, firmware of arduino as software programmed using the Arduino programming language
and arduino board and sensors as hardware. by using (depended on Wiring) and the Arduino development
arduino mega board provides multiple inputs analogs and environment (depended on processing). Arduino projects
I/O can be stand-alone or they can communicate with software
running on a computer (e.g. Flash, Processing, MaxMSP) A
greenhouse is seen as a multivariable process presents a
nonlinear nature and is influenced by biological processes
[Herrero et al., 2007].The five most important parameters
must be taken into consideration when design a greenhouse
Manuscript received March 10, 2017 are temperature, relative humidity, ground water,
Prof.D.O.Shirsath, Assistant Professor, Department of Electronics and illumination intensity and CO2 concentration. This
Telecommunication Engineering, P. V. P. Institute of Technology, Budhgaon, parameters is important to realize that the five parameters
Maharashtra, India
Punam Kamble, U.G.Scholar, Department of Electronics and mentioned above are nonlinearand extremely
Telecommunication Engineering, P. V. P. Institute of Technology, Budhgaon, interdependent [Fourati et al., 2007; Blasco et al., 2007;
Maharashtra, India, email: pskamble1994@gmail.com Putter and J. Gouws, 1996]. the computer control system for
Rohini Mane, Department of Electronics and Telecommunication the greenhouse involves the series steps [Melrolho, 1999]:
Engineering, P. V. P. Institute of Technology, Budhgaon, Maharashtra, India
Ashwini Kolap, Department of Electronics and Telecommunication
1. Acquisition of data through sensors.
Engineering, P. V. P. Institute of Technology, Budhgaon, Maharashtra, India 2. Processing of data, comparing it with desired states and
Prof.R.S.More, Assistant Professor, Department of Electronics and finally deciding what must be done to change the state of
Telecommunication Engineering, P. V. P. Institute of Technology, Budhgaon,
Maharashtra, India system.
3. Actuation component carrying the necessary action.
Copyright © 2017. Innovative Research Publications. All Rights Reserve 234
 IOT Based Smart Greenhouse Automation Using Arduino

This paper describes a solution to the first part of the system.

The information is obtained from multi-sensors station and
is transmitted through USB port to computer.

II. RELATED WORK

This project describes the design of a greenhouse
monitoring & controlling system based on IOT using
Arduino. Some of the previous systems used android phone
to monitor the green house but lacked to control it using
android from remote locations. One of them was based on
Global System for Mobile Communications (GSM) in which
notifications are sent via SMS, but disadvantage of this
system was every time user had to type commands which was
time consuming and costly. The biggest disadvantage of
these systems was that one person always had to be present in Fig:1: Pinout of ATmega 328
the green house or in the vicinity of the green house[6]. The
first problem which is overcome in our system is that a The Arduino are programmed using a dialect of feature
person need not always be present in the greenhouse. Plants from programming language C and C++. In addition to
in green house are grown under controlled environment. The using traditional compiler tool chains, the Arduino provide
temperature differences can cause harm to plants. integrated development environment (IDE) based on
Sometimes the farmers cannot predict which action needs to processing language project [1].
be taken so to control the environment and may take wrong
B. Atmospheric Sensor’s
decisions thus causing more harm to the plants in the green
house. Our system will allow him to take proper decisions by i) Soil Moisture Sensor:
providing the status of the sensors to the farmer with The two copper leads act as the sensor probes. They are
accurate information through the IOT web server. Thus this immersed into the specimen soil whose moisture content is
system helps farmer to control green house from remote under test. The conductivity of soil depends upon the amount
locations. of moisture present in it. It increases with increase in the
water content of the soil that forms a conductive path
III. THEORY between two sensor probes leading to a close path to allow
A. Arduino UNO current flowing through.
The arduino Uno is a microcontroller board based on
the ATmega328, It has 14 digital input/output pins, 6 analog
input, a 16 MHZ crystal oscillator, a USB connection, a
power jack, an ICSP header, and a reset button. The Uno
differ from all preceding boards in that it does not use the
FTDI USB to serial driver chip.”UNO” means one in Italian
and is named to mark the upcoming release of arduino 1.0.
The Uno is the latest in a series of USB Arduino boards and
reference model for Arduino platform. The Arduino Uno can
power via the USB connection or with external power
supply. External power can come either from an AC to DC Fig 2: Soil Moisture Sensor
adapter or battery.The board can operate on an external
supply of 6 to 20 volts. If supply with less than 7v, however, ii) Light Sensor (LDR):
the 5v pin may supply less than five volts and the board may
be unstable. The Ttmega328 has 32 KB of flash memory for
storing code .It has also 2KB of SRAM and 1KB of
EEPROM. The Arduino software includes a serial monitor
which allows simple textual data to be send to and from the
Arduino board, The RX and TX LEDs on the board will
flash when data is being transmitted via the USB to serial
chip and USB connection to the computer.
A Software Serial library allows for serial communication on
any of the UNO’s digital pins, the arduino software includes
a wire library to simplify use of the I2C bus. Arduino is open
source hardware and software, which are license under the
GNU lesser General public license, which is permitting the
manufacture of Arduino board and software distribution by Fig 3: LDR Sensor
anyone.
Copyright © 2017. Innovative Research Publications. All Rights Reserve 235
 International Journal of Innovative Research in Computer Science & Technology (IJIRCST)
ISSN: 2347-5552, Volume-5, Issue-2, March 2017
DOI: 10.21276/ijircst.2017.5.2.4

The light sensor is extremely sensitive in visible light range. greenhouse.A customer able to define specific greenhouse
With the light sensor attached to the system when the conditions.“Plug-And-Play” product.
surrounding natural lights are low, it displays the digital This project describes the design of a greenhouse monitoring
values. & controlling system based on IOT using Arduino.
Agriculture projects even in urban areas are on a rise in
iii) Humidity Sensor (DHT11)
recent times, in unique forms technological progress makes
the agricultural sector grow high, Which here is made by the
IOT. The IOT will dramatically change the way we live our
daily lives & what information is stored about us. The
computing is free to use anytime from the cloud and
anywhere as long as the computer is connected with the
internet. This monitoring & controlling system precepts
different parameters inside the greenhouse using
sensors,GSM & IOT to provide the updates. The developed
system can be proved profitable as it will optimize the
resources in the greenhouse. The complete module is of low
cost, low power operation hence, easily available to
everyone.

Fig 4: DHT11 Sensor V. PROPOSED METHODOLOGY

Humidity sensor is used for sensing the vapours in the air.

The change in RH (Relative Humidity) of the surroundings
would result in display of values.
iv) Temperature Sensor ( LM35):

Fig 6: Block Diagram

The basic block diagram of greenhouse system is as shown in

Fig 5: LM35 Sensor fig .5. An Arduino platform micro- controller is used to
obtain values of physical data through sensors connected to
If the temp exceeds beyond the limit set then a fan will be
it. And then sensor’s collected data is given to GPRS
automatically switched ON as a coolant to reduce the
module.
temp.When it reaches the desired temp the fan will be
switched OFF automatically with the help of a relay.But A. Mechanism
if the temp decreases bellow the optimum temp a bulb as  An arduino based Greenhouse Automation is designed.
a heater will be switched ON to set the temp within the  The arduino can be programmed with arduino software
desired range. (IDE).
 Internet Of Things concept is used for showing the
IV. SIGNIFICANCE AND SCOPE sensed data on web portal page.
Automatically control environmental conditions within
greenhouse allowing any type of plants to be grown all year
round.
Eliminates risk of greenhouse not being maintained at
specific environmental conditions due to human
error.Minimize labor costs involved in maintaining a

Copyright © 2017. Innovative Research Publications. All Rights Reserve 236

 IOT Based Smart Greenhouse Automation Using Arduino

Fig 8: IDE Software

VI. EXPERIMENTAL RESULTS

In this proposed system we have used atmospheric sensor’s,
which is LDR light sensor, LM35 temperature, DHT11
humidity sensor. For these sensor’s we have denoted some
specific conditions or the threshold values .As per their
climate the value will be change and the controlling action
will be taken by relays which is connected to the output side.
And the changed data of atmospheric sensor’s we can
observed for analyzing on the screen of serial monitoring
using the arduino uno kit and their IDE software.The
hardware of proposed system and status of the sensor’s
shown in fig.9 & fig.10.

Fig 7: Flow chart

B. Software Implementation
The software part programming through Arduino Uno
software (IDE). It is easy to write code and upload it to the
board.C and C++ language are used for programming.

Fig 9: Hardware assembly

Copyright © 2017. Innovative Research Publications. All Rights Reserve 237

 International Journal of Innovative Research in Computer Science & Technology (IJIRCST)
ISSN: 2347-5552, Volume-5, Issue-2, March 2017
DOI: 10.21276/ijircst.2017.5.2.4
Technologies (ICIET’2014) Dec. 28-29, 2014 Bangkok
(Thailand)
[6] Smart Green House Automation -Rahul Belsare et al. /
International Journal of Computer Science &
Engineering Technology (IJCSET)
[7] www.arduino.cc
[8] http://www.adafruit.com/products/1438
[9] www.sparkfun.com

Fig 10: Serial Monitoring Output of Atmospheric Sensor’s

- Arduino Uno ATmega328 kit.

- Atmospheric Sensor.
A. Advantages
 Total automation of greenhouses / nurseries / bio tech
parks.
 Can be used domestically.
 Easy to use, install, operate & troubleshoot.
 Useful for small scale farmers &green house
owners.Low cost setup.

V. CONCLUSION
Here, proposed design is implemented with Arduino
platform for greenhouse monitoring , controlling
temperature and soil moisture with the help of Web server
using IOT.

REFERENCES
[1] Data Acquisition Of Greenhouse Using Arduino -
Journal Of Babylon University/Pure And Applied
Sciences/ No.(7)/ Vol.(22): 2014
[2] Greenhouse Automation System Using Psoc 3 - Journal
Of Information, Knowledge And Research In
Electronics And Communication Engineering
[3] Arduino Based Automatic Plant Watering System -
Devika Et Al., International Journal Of Advanced
Research In Computer Science And Software
Engineering 4(10),October - 2014, Pp. 449-456,
Volume 4, Issue 10, October 2014, ISSN: 2277 128X
[4] Remote Sensing In Greenhouse Monitoring System -
SSRG International Journal Of Electronics And
Communication Engineering (SSRG-IJECE) – EFES
April 2015
[5] Sensor Based Automated Shading Of Green House -
International Conference On Innovative Engineering

Copyright © 2017. Innovative Research Publications. All Rights Reserve 238

View publication stats