433 All

Mitsubishi Heavy Industries Thermal Systems VRF inverter multi-system Air-Conditioners
R410A
R410A
High
HighPerformance
Performance
Air-Conditioning
Air-Conditioning
2018
2018
VRF
VRF
inverter
inverter
multi-system
multi-system
Air-Conditioners
Air-Conditioners
50Hz
50Hz
18KX01E
18KX01E
EU/EEA
EU/EEA
High Performance
Air-Conditioning
2018
The Mitsubishi Heavy Industries Thermal Systems

KXZ VRF series delivers high performance in cooling and
heating for all commercial applications.
It offers the highest level of design flexibility, improved
efficiency as well as enhanced operational functions.
2
Line Up R410A
NEW
model
Heat recovery system
RC-EX3
Simple use with advanced setting Remote control
Contents
Introduction 4~29
Outdoor units 30~75
Micro KXZ, Micro model 30~33
KXZ Lite 34 . 35
KXZ Standard series 36~43
KXZ Hi-COP series 44~47
KXZ Heat recovery system 48~63
Water cooled series 64 . 65
High head series 66~69
Refresh series 70 . 71
Indoor units 76~115
EEV-KIT 1 16 . 117
Control systems 1 18~127
Energy efficient and environmentally conscious 128
3
R410A
KXZ system is the best solution

to Air-condition "Sophisticated" buildings
KX VRF series delivers high cooling/heating performance for all commercial applications.
・High energy efficiency with advanced technology

High Efficiency & ・Energy saving control by VTCC (Variable Temperature &
Comfort Capacity Control)
・Individual, centralized and customized comfort control
・Long piping length and wide limitation of piping

Design Flexibility ・Various indoor units to each application
・Easy selection and design software
・Individual advanced control by wired and

Easy & wireless remote controller
Customized Control ・Various options for BMS & Centralized controller
・Easy access for maintenance

Good Serviceability ・Engineering and monitoring tool available
"Micro series" for small offices,

shops and residential applications
Industry leading compact design, energy efficiency, and high reliability from our high technology
NEW
4
Specific cases of VRF system installation from
Mitsubishi Heavy Industries Thermal Systems
Case study: Hotel and Leisure

VRF heat recovery systems
from Mitsubishi Heavy
Industries Thermal Systems
KX range are part of the
exacting specification for
luxury hotels and airport-style
bus station. Mitsubishi Heavy
Industries Thermal Systems
VRF systems feature
advanced inverter technology
which adjusts compressor
output to match the cooling or
heating demands of the indoor
units to save energy and
eliminate temperature
fluctuations. Simultaneous
heating or cooling can be
provided in different areas as
required, with heat gain in
sunnier, south facing rooms
providing useful energy for
rooms on the cooler, shadier
side of the buildings.
Case study: Education

A VRF system with inverter control from Mitsubishi Heavy
Industries Thermal Systems is helping to make Crossways
Academy in Lewisham a cool place to learn for 500 students.
Comfortable temperatures need to be maintained as
economically as possible in rooms where large numbers of
students will enter or leave at the same time. IT equipment
being switched on and off and the use of electric blinds to
control glare will all contribute to substantial fluctuations in
heat load. A VRF KX system from Mitsubishi Heavy Industries
Thermal Systems provides an ideal solution. Much of the
building was designed to rely on natural ventilation, with
windows operated electronically. The air conditioning system is
linked to this control system to close down when windows are
opened. Mitsubishi Heavy Industries Thermal Systems KX is
particularly appropriate for many such retrofit applications.
5
R410A
The KXZ product lineup has been extended to offer solutions delivering up to 60 horsepower (60HP) when using a combination
of 3 outdoor units. Furthermore with the addition of the Hi-COP series, installation options have been greatly increased.
Previous Model KXZE1
Up to 48HP Up to 60HP
KXZXE1 (Hi-COP)
8-36HP
By combining 3 outdoor units 60HP can be achieved
Heat pump systems

The heat pump systems operate with 2 inter-connecting pipes,
thus commonly referred to as a '2-pipe system'.
These systems provide either a heating or cooling operation to

all indoor units and are suitable for a wide range of applications
from an individual apartment to an entire multi storey building,
especially where there are significant open plan areas to be
controlled.
The range starts with a 11.2kW cooling capacity, up to 20HP
with 56.0kW cooling capacity. Outdoor units can also be
“twinned” or “tripled” providing up to 60HP/168.0kW on a
single system.
The range has a total piping length of 1000m (KXZ)

and the furthest indoor unit can be connected up to
160m (KXZ) from the outdoor unit.
Capacity Range
Capacity 4HP 5HP 6HP 8HP 10HP 12HP 14HP 16HP 17HP 18HP 20HP
Model Code : kW 11.2 14 15.5 22.4 28 33.5 40.0 45.0 47.5 50.0 56.0
BTU / h 38,200 47,800 52,900 76,400 95,500 114,300 136,500 153,500 162,100 170,600 191,100
Capacity 22HP 24HP 26HP 28HP 30HP 32HP 34HP 36HP 38HP 40HP
Model Code : kW 61.5 67.0 73.5 80.0 85.0 90.0 95.0 100.0 106.0 112.0
BTU / h 209,800 228,600 250,800 273,000 290,000 307,100 324,100 341,200 361,700 382,100
Capacity 42HP 44HP 46HP 48HP 50HP 52HP 54HP 56HP 58HP 60HP
Model Code : kW 120.0 125.0 130.0 135.0 142.5 145.0 150.0 156.0 162.0 168.0
BTU / h 409,400 426,500 443,600 460,600 486,200 494,700 511,800 532,200 552,700 573,200
6
Product Line Up
<Outdoor units>
NEW
11.2kW 14.0kW 15.5kW
4HP 5HP 6HP
FDC112KXZEN1 FDC140KXZEN1 FDC155KXZEN1
FDC112KXZES1 FDC140KXZES1 FDC155KXZES1
model
22.4kW 28.0kW 33.5kW 22.4kW 28.0kW

8HP 10HP 12HP 8HP 10HP
FDC224KXE6 FDC280KXE6 FDC335KXE6 FDC224KXZPE1 FDC280KXZPE1
Standard model
28.0kW 33.5kW 40.0kW 45.0kW 47.5kW 50.0kW 56.0kW
10HP 12HP 14HP 16HP 17HP 18HP 20HP
FDC280KXZE1 FDC335KXZE1 FDC400KXZE1 FDC450KXZE1 FDC475KXZE1 FDC500KXZE1 FDC560KXZE1
FDC280,335 FDC400~560
61.5kW 67.0kW 73.5kW 80.0kW 85.0kW 90.0kW 95.0kW 100.0kW 106.0kW 112.0kW
22HP 24HP 26HP 28HP 30HP 32HP 34HP 36HP 38HP 40HP
FDC615KXZE1 FDC670KXZE1 FDC735KXZE1 FDC800KXZE1 FDC850KXZE1 FDC900KXZE1 FDC950KXZE1 FDC1000KXZE1 FDC1060KXZE1 FDC1120KXZE1
FDC615,670 FDC335KXZE1 FDC335KXZE1 FDC400KXZE1 FDC400KXZE1 FDC450KXZE1 FDC450KXZE1 FDC475KXZE1 FDC500KXZE1 FDC560KXZE1 FDC560KXZE1
FDC735 FDC800~1120
FDC1200~1680 FDC400KXZE1 FDC450KXZE1 FDC450KXZE1 FDC450KXZE1 FDC475KXZE1 FDC500KXZE1 FDC500KXZE1 FDC560KXZE1 FDC560KXZE1 FDC560KXZE1
Hi-COP model
22.4kW 28.0kW 33.5kW
8HP 10HP 12HP
FDC224KXZXE1 FDC280KXZXE1 FDC335KXZXE1
FDC224 FDC280,335 45.0kW 50.0kW 56.0kW 61.5kW 67.0kW

FDC450KXZXE1 FDC500KXZXE1 FDC560KXZXE1 FDC615KXZXE1 FDC670KXZXE1
FDC450 FDC500 FDC560~670 73.5kW 80.0kW 85.0kW 90.0kW 95.0kW 100.0kW

26HP 28HP 30HP 32HP 34HP 36HP
FDC735KXZXE1 FDC800KXZXE1 FDC850KXZXE1 FDC900KXZXE1 FDC950KXZXE1 FDC1000KXZXE1
FDC735 FDC800 FDC850~1000
7
R410A
<Indoor units> A range of 17 types of exposed or concealed indoor units available in a wide range of capacities (total 93 indoor models).
The best solution of indoor units for all applications is available from our full lineup.
1.5kW 2.2kW 2.8kW 3.6kW
<0.5HP> <0.8HP> <1HP> <1.25HP>
NEW (4~6HP)
model (8~12HP)
KXZ Lite
Standard model KXZE1
Hi-COP model KXZXE1
Heat recovery system KXZRE1
4way FDT FDT28KXZE1 FDT36KXZE1
4way Compact FDTC FDTC15KXE6F FDTC22KXE6F FDTC28KXE6F FDTC36KXE6F
Ceiling
2way FDTW FDTW28KXE6F
Cassette
1way FDTS
1way Compact FDTQ FDTQ22KXE6F FDTQ28KXE6F FDTQ36KXE6F
High FDU
Static Pressure
Low/Middle FDUM FDUM22KXE6F FDUM28KXE6F FDUM36KXE6F
Duct Static Pressure
Connected Low Static
Pressure(thin) FDUT FDUT15KXE6F-E FDUT22KXE6F-E FDUT28KXE6F-E FDUT36KXE6F-E
Compact & FDUH FDUH22KXE6F FDUH28KXE6F FDUH36KXE6F

Flexible
Wall Mounted NEW FDK FDK15KXZE1 FDK22KXZE1 FDK28KXZE1 FDK36KXZE1
Ceiling Suspended FDE FDE36KXZE1
2way FDFW FDFW28KXE6F
Floor
With Casing FDFL
Standing
Without Casing FDFU FDFU28KXE6F
OA Processing unit FDU-F • FDU-F series are not connectable to Micro model (4~6HP), KXZ
Air flow m3/h 150 250 350 500

Fresh Air Ventilation and
NEW SAF
SAF150E7 SAF250E7 SAF350E7 SAF500E7
Heat Exchange unit
Fresh Air Assembly SAF-DX SAF-DX250E6 SAF-DX350E6 SAF-DX500E6
8
4.5kW 5.6kW 7.1kW 9.0kW 11.2kW 14.0kW 16.0kW 22.4kW 28.0kW
<1.6HP> <2HP> <2.5HP> <3.2HP> <4HP> <5HP> <6HP> <8HP> <10HP>
FDT45KXZE1 FDT56KXZE1 FDT71KXZE1 FDT90KXZE1 FDT112KXZE1 FDT140KXZE1 FDT160KXZE1
FDTC45KXE6F FDTC56KXE6F
FDTW45KXE6F FDTW56KXE6F FDTW71KXE6F FDTW90KXE6F FDTW112KXE6F FDTW140KXE6F
FDTS45KXE6F FDTS71KXE6F
FDU45KXE6F FDU56KXE6F FDU71KXE6F FDU90KXE6F FDU112KXE6F FDU140KXE6F FDU160KXE6F FDU224KXZE1 FDU280KXZE1
FDUM45KXE6F FDUM56KXE6F FDUM71KXE6F FDUM90KXE6F FDUM112KXE6F FDUM140KXE6F FDUM160KXE6F
FDUT45KXE6F-E FDUT56KXE6F-E FDUT71KXE6F-E
FDK45KXZE1 FDK56KXZE1 FDK71KXZE1 FDK90KXZE1
FDE45KXZE1 FDE56KXZE1 FDE71KXZE1 FDE112KXZE1 FDE140KXZE1
FDFW45KXE6F FDFW56KXE6F
FDFL71KXE6F
FDFU45KXE6F FDFU56KXE6F FDFU71KXE6F
Lite. FDU650FKXZE1 FDU1100FKXZE1 FDU1800FKXZE1 FDU2400FKXZE1
800 1000
SAF800E7 SAF1000E7
SAF-DX800E6 SAF-DX1000E6
9
R410A
1. High Efficiency & Comfort

Improved Efficiency
The below graphs highlight the improved efficiencies between the previous
models compared to the KXZ standard and Hi-COP models.
Previous model
KXZ Standard
Comparison of EER in Cooling Mode Hi-COP
EER
4.70
4.50
4.30
4.10
3.90
3.70
3.50
3.30
3.10
2.90
2.70
2.50
224 280 335 400 450 475 500 560 615 670 735 800 850 900 950 1000 1060 1120 1200 1250 1300 1350 1425 1450 1500 1560 1620 1680
MODEL
Comparison of COP in Heating Mode

COP
4.70
4.50
4.30
4.10
3.90
3.70
3.50
224 280 335 400 450 475 500 560 615 670 735 800 850 900 950 1000 1060 1120 1200 1250 1300 1350 1425 1450 1500 1560 1620 1680
MODEL
High efficiency and compact design are realized by

applying various advanced components
10~60HP (KXZ)
DC Fan Motor
Tetrahedral structure of Efficient Heat Exchanger

Heat Exchanger
Double tube
New Inverter Control Improved Scroll Compressor
10
Variable Temperature and Capacity Control (KXZ)
• The VTCC is a newly developed energy saving function
34%
designed by Mitsubishi Heavy Industries Thermal Systems.
• A new feature to all our KXZ ranges which provides
up to 34%* energy savings in both cooling and
heating mode.
• VTCC is a function specifically designed to maximise ENERGY SAVINGS*
energy savings in partial load conditions throughout
all seasons.
*34% energy savings are based on comparison with a KXZ standard model with
VTCC vs. a KXZ standard model both under partial load condition.
Normal operation (in the cooling mode) Energy saving operation (in the cooling mode)
Room temperature Room temperature
Check temp erature difference
Set temperature Set temperature
Compressor
Compressor
Off Off Off Target low pressure

Target low pressure
Constant level
VTCC adjusts the target pressure of the refrigerant cycle in the For example, in partial load conditions where you have low cooling
outdoor unit automatically according to the demand of the indoor and heating requirements, VTCC reduces the compressor frequency
units in partial load conditions. and controls the actuators in the outdoor unit.
These smooth adjustments ensure an optimal capacity usage of the Overall with the VTCC functionality you will always have an
indoor units as well as maximised energy savings. Ultimately this additional energy saving of up to 34% (depending on configuration
also increases comfort for the user. and usage of system) in low cooling and heating load requirements.
Multiport compressor that achieves high efficiency (KXZ, KXZ Lite)

The new multiport discharge area in the compressor has optimized pressure control with better balancing.
The performance improvement at medium Hz has resulted in higher annual efficiencies.
Multi-discharge port
By optimizing pressure
adjustment in decompression,
the compressor realizes higher
efficiency.
Discharge port
11
R410A
Concentrated winding motor achieves "High Output" and

"Total Efficiency Improvement" Total Efficiency
New Concentrated *
Output
The newly designed high performance CPU
Winding Motor
enables high precision optimization for
compressor speed, which leads to concentrated
winding motor use.
Our product achieves high output and better
energy saving effects and Conventional Distributed
in particular improves seasonal efficiency rating. Winding Motor
Improved Seasonal
Efficiency rating
Compressor Speed
* Applied for KXZE1:10/12/17/18/20HP, KXZXE1:8HP & KXZ Lite:8/10HP
Improved Heat-exchanger [Previous] [KXZ]

With piping layout rearranged from header to
heat exchanger, refrigerant distribution flow
has improved and maximum energy efficiency
has been achieved. Heat exchanger has Heat- Heat-
improved refrigerant distribution and Exchanger Exchanger
increased effectiveness.
Furthermore due to expansion of effective
heat transfer area in heat exchanger, energy
Header Distributor
efficiency has increased.
Strengthened resistance against frost

Resistance against frost has been strengthened by achieving improved heat-exchanger.
Vector control Vector Control

New applied Vector control has a high efficiency and many new
Power current
advanced features.
• Smooth operation from low speed to high speed
• Smooth Sine Voltage Wave form are attained
• Energy efficiency is further improved in low speed range
Operation period
DC Fan Motor
Long-chorded 3 propeller fan with serration Employment of DC fan motor has enabled to realize an excellent
Fan blade design adapted from Mitsubishi Heavy Industries efficiency of approximate 60% higher than previous models.
aerospace division - with serrated edges that deliver increased
air volume with less power input. Rotor(Squirrel Cage made of conductor)
Stator (coil) Rotor(made of permanent magnet)
Serration Stator (coil)
12
Oil level control capability Capacity control (KXZ)
Our proprietary technology of adjusting oil level for combination of Capacity control can be set by peak cut function with RC-EX3
two or three outdoor units has realized leveled operation rate, keeping for better energy saving.
performance of the units and ensuring long life of the system. Five-step capacity control is available. (100-80-60-40-0%)
(kW)
PEAK CUT
AM PM
8 9 10 11 12 13 14 15 16 17 18 19
Oil-equalizing pipe
4~6HP (Micro KXZ)

Compact high efficiency Heat
Compact High Efficient
Exchanger
Heat Exchanger • Optimizing relationship of the air flow velocity &
Inverter Control fin pattern
Vector Inverter Control system • Improvement of air distribution Maximizing
efficiency of heat exchanger
Twin Rotary
Compressor Heat Exchanger
DC Fan Motor
Compact & High efficiency
Optimum Refrigerant System Control Compact Integrated PCB

• Optimum heat exchanger refrigerant distribution • Control Box size reduction
• Advanced refrigerant liquid return protection control system • PCB size reduced by 50%
• High speed system control by new Superlink system Control PCB: Single-sided board Double-sided board
Inverter PCB: Power transistor size reduction
• New Superlink system control
• New Design method applid
8~12HP (Micro)
DC Fan motor
Compact & High efficiency
Inverter Control
Compact & Vector Inverter Control system
Downsized accumulator
Receiver in fan section
3D-Scroll Compressor(12HP)
Previous Micro
13
R410A
2. Design Flexibility
Indoor unit capacity connection HP Capacity connection
Micro KXZ 4~6 150%
Micro model 8~12 150%

KXZ Lite 8 . 10 120%
Standard KXZ 10~60 130%

KXZ
130% capacity connection

Connectable indoor units
Micro KXZ HP 4 5 6 8 10 12 HP 8 10
KXZ Lite
Micro model Numbers 8 10* 10* 22 24 24 Numbers 8 8
HP 10 12 14 16 17 18 20 22 24 26 28 30 32 34
Numbers 24 29 34 39 41 43 48 53 58 63 69 73 78 80
Standard KXZ
HP 36 38 40 42 44 46 48 50 52 54 56 58 60
Numbers 80 80 80 80 80 80 80 80 80 80 80 80 80
* When connecting 9 units or more, set the total capacity as follows : 5HP : 110% or less, 6HP : 100% or less.
Wide Range of Operation (KXZ, KXZ Lite)

KXZ series permits an extensible
Heating
system design considering a heating
-20ºC Micro KXZ, KXZ, KXZ Lite +15.5ºC
range operation under a low
temperature condition down to -20˚C
and a cooling range operation up to Cooling
46˚C. Furthermore KXZ Lite extends a
cooling range operation up to 50˚C. -15ºC Micro KXZ +43ºC
-15ºC KXZ +46ºC
-15ºC KXZ Lite +50ºC
-20 -10 0 10 20 30 40 50
Control Systems
All series offer wide variation of control system and provide the best solution.
[Control system units with SUPERLINK- ]

Classification Type Model Connectable Indoor units Electric power
(Maximum) calculation
RC-E5 16
Individual controller Wired RC-EX3 16
Wireless RCN-T-5AW-E2 etc. 16
SC-SL1N-E 16
Push buttons SC-SL2NA-E 64
SC-SL4-AE 128
Center Console Touch screen
SC-SL4-BE 128
Web gateway SC-WBGW256
BMS interface & BACnet 256(128x2)
units Lonworks SC-LGWNB 96(48x2)
14
Long Pipe Length 10~60HP(KXZ)
Piping length has extended max height difference between indoor units up to 18m and enables us to put indoor units on extra three floors.
The furthest indoor unit: 160m or total length: 1000m contributes to system design flexibility.
Max: 10m (oil equalizing pipe)
Total length: Outdoor unit Max: 0.4m

1000m
Height difference *2
Max: 5m 50m(outdoor unit above) 70m
To the
Indoor unit 40m(outdoor unit below)
first branch:
max 130m
Max height
Indoor unit difference
between
indoor units:
18m
*1 The difference between the longest and the
Indoor unit shortest indoor unit piping from the first
From the first branch
branch must be within 40m. (MAX85m)
to the furthest
indoor unit: 90m *
1
Furthest
indoor unit: *2 In case of height difference up to 70m, please
contact your dealer.
160m Height difference up to 90m is possible with
High Head series. Please refer to page 66.
Easy Transportation & Installation

Due to realization of significant reduction in size and foot print which is one of
the smallest in the industry, transportation in an elevator made for six persons
(Width:1400mm, Depth:850, Open area:800mm) is possible, eliminating cost
of a crane and reducing labor.
1,400
Transportation in an
8~12HP (Micro) elevator made for six
persons
H1,675 x W1,080 x D480
850
Easy
transportation
800
KXZ is portable and the uniform reduced footprint allows neat,

continuous installation.
1350mm
1350mm
1350mm
Blue Fin
Due to application of blue coated fins for the heat
exchanger of new outdoor unit, corrosion resistance
Blue
Fin
has been improved compared to current models.
15
R410A
Automatic Select functions for capacity control (KXZ Lite)

The following 3 items are available for capacity control function. User can select one item individually or select 2or3 items at the same time.
In case of selecting 2or3 items, the unit will operate with the most effective function automatically.
• Compressor speed control

User can set compressor speed at 100%-80%-60%-40% before starting operation
with PWB in the outdoor unit or with a demand controller (procured locally).
• Capacity control timer

User can set capacity control with RC-EX3 up to 4 times per day maximum.
The timer setting can be changed using 5 minute intervals. Please refer to page 13.
• Silent mode
Considering noise regulations or surrounding circumstances, you can now select 4 levels of silent mode.
Setting the combination of silent mode is available by using timer function of RC-EX3.
Priority operation mode rule (KXZ, KXZ Lite)

User can select the following priority operation mode. (for whole system)
1. First unit’s operation mode (by default setting) 3. Majority operation mode (see below)
2. Last unit’s operation mode 4. Master operation mode (see below)
<Majority operation mode> <Master operation mode>

The system is operated according to the mode selected by the The system is operated according to master operation mode.
majority of units in operation (whichever greater capacity When master operation mode is set at cooling mode, units
between the sums of cooling mode and heating mode). selected as heating mode is set to fan mode automatically.
The operation mode in minority is set to fan mode automatically.
Operation mode : Master setting :
Cooling Operation mode :
Cooling
Heating
45
Operation mode :
Heating 56 45
56 56
71 56
71
28
28
Operation mode Operation mode

cooling capacity heating capacity
45 + 45 + 56 + 56 + 56 + 56 71 + 71 + 28 + 28
Total Operation mode :
Total 198
314 Cooling Master setting :
Cooling
Operation mode : Operation mode :

FAN FAN
Fixed Cooling mode/fixed heating mode (summer/winter switch)

It is possible to fix the operational mode of the system (either cooling or heating) using a switch (SW3-7) on the outdoor unit PC board - this enables
the building user to decide the operation of the system (e.g. cooling only in summer/heating only in winter), to avoid unnecessary energy wastage.
It is also possible to wire the control switch to a remote location (inside the building) to a control room, or even linked to an ambient thermostat.
16
3. Serviceability
Easy Service Check Operation (10~60HP)
Quick and easy access to service parts by separation of Closing of Service valve, crossing connection of refrigerant
compartments. piping and electrical wiring, proper operation of EEV (Electrical
Expansion Valve) can be checked automatically in cooling
operation. This check operation can be done at 0~43ºC outdoor
temperature and 10~32ºC indoor temperature by use of
outdoor unit dip switch. The check should be done in one
refrigerant system. It takes 15~30 minutes and avoids frequent
failure by preventing careless mistakes during installation.
Blower dip switch
compartment
Mechanical
compartment
Monitoring Function
All series includes feature to assist with servicing and trouble shooting.
Various data can be monitored through 3-digit or 6-digit display on the outdoor unit PCB.
Detailed fault diagnosis and operation history memory via Equipped with RS232C
7-segment display. for connection directly to
your PC monitoring and
service tasks made
simple with our service
software (“Mente PC”).
All series
4~6HP 8~60HP
8 . 10HP(KXZ Lite)
Automatically produced test-run report Operation data storage during servicing
6
Operation data storage when a fault occurs
SL Checker 3 Layer Construction

Remote Control can be operated function from setting Superlink Thanks to control box structure with 3 layer/2 layer construction
checker. using hinge connection, service and maintenance has been made
much easier for inverter
components.
Indoor unit
Outdoor unit
USB
Superlink Line SL checker KXZ (3 layer) KXZ Lite (2 layer)
monitor interface SL checker
17
R410A
Back-up Operation
In the event that one unit has a failure, the system will keep operating In the event that one compressor has a failure, the unit will keep
with the other good units. operating with the another good compressor.
Combination of two or three outdoor units KXZ : 18 & 20HP
Keeping Compressor
operation failed
Inverter
Unit failed This operation is an emergency measure for a limited time and
a necessary repair should be done as soon as possible.
Improved features (KXZ Lite)
Improved freedom of piping layout Wire insertion holes for fall prevention External static pressure
Front 4 Rear
1 2 Right
3
Down
current
KXZ Lite External static pressure is
available up to 35 Pa.
135mm
90mm
50mm 90mm
Hole size becomes 120% bigger.
Four handles A transparent rain cover Fixing screws to service panel
2
4 1
2 1
3
5
2
Located at the same level for easy Attached as a standard for easy Decreasing number of screws from 5 to 2,
transport and transfer. maintenance. installation & service speed is improved.
18
Easy Selection Tool E-solution
E-Solution is a design software tool which includes specification details of the latest KXZ VRF systems. By using E-Solution
this simplifies the process and enables engineers to select the most cost-effective and energy efficient mix of indoor units,
outdoor units, pipework and controls.
Engineers must register and download the E-solution software to ensure they are automatically sent updates as they become
available and this can be done by simply visiting www.mhiae.com/support-downloads/e-solution
Furthermore it is also developed to cater for the design of two and three pipe systems and specifies appropriate models and
sizes. It also generates wiring diagrams and engineering drawings which can be exported to AutoCAD or saved in PDF format.
This flexibility enables engineers to print select design information and comprehensive operation and maintenance manuals for
presentations to clients.
Engineers can also incorporate design information into their own
formats and documents for personalised proposals.
19
R410A
New Generation FDT
Automatic energy saving control
Keep maximum comfort with minimal draft
Quiet operation
Draft Prevention Panel (Option) Motion Sensor (Option)
- Brand new function in the market Two energy saving control by

- Flexible flap control for draft detecting human moving
prevention
4 additional flaps are to be controlled individually at each
Power Control
operation mode. New motion sensor (option) detects human activity.
They change air flow direction and prevents draft feeling . Energy saving control is achieved by shifting set
This new function also achieve more flexible control for air temperature according to detected amount of activity.
flow direction.
Auto-off
User can position Draft Prevention Panel panels by using
the remote controller only (RC-EX3, RCN-T-5AW-E2). �nit will go off automatically� when no activity is
detected for 12 hours.
When the unit is turned off,
the additional flaps close in.
Motion Sensor
※It can also prevent user from being directly blown by hot drafts
in heating mode.
20
New Generation FDK
Elegant Timeless Design (15-90KXZE1) Flap control system

European design Multi motors make 3
The FDK series air-conditioners have been stylishly designed independent controls
with rounded contours that fit beautifully into any of Europe’s
Air flow and its direction is controlled with
diverse interior settings. The design was created by the Italian
3-dimensional.
industrial design studio Tensa srl, based in Milan, to respond to
a broad spectrum of local user needs.
Lateral Swing flaps swings from right to left
automatically
Up/Down Flap swing

+
Lateral swing
FDK15~56KXZE1 Up
Left Right
FDK71,90KXZE1
Down
More quiet noise

Reduction of sound pressure level (Lo mode)
Quiet airflow is realized by Jet Technology.
(Comparison of previous model)
dB(A)
50 4dB
3dB 3dB 3dB 4dB less!! New
less!! less!! less!! less!! lineup!!

40 New 39dB
37dB 35dB 35dB
lineup!!
33dB 33dB 33dB
31dB 31dB 31dB
30 28dB 28dB 28dB 28dB
20
FDK15 FDK22 FDK28 FDK36 FDK45 FDK56 FDK71 FDK90
21
R410A
(in Japan)
The Good Design Award is

Japan's only comprehensive
design evaluation and
recommendation initiative,
Ceiling cassette originating with the "Good Design
Products Selection System"
FDT seriese founded in 1957.
It is now a global design award
with participation from numerous
Draft Prevention Panel

User
Japanese and international
companies and organizations.
The "G Mark", the symbol of the
Keep maximum comfort with minimal draft: Good Design Award, is known
New FDT control flaps with more flexibility. widely as a symbol of excellent
design.
Draft Prevention Panel Operating Image
Flap
Draft Prevention
Panel Wing
New Generation! High
temperature
Draft Prevention Panel working (Cooling mode)

Low

placed at off position
Draft Prevention Panel working
Draft Prevention Panel provides a comfortable airflow without any draft feeling. Whether cooling or
heating a room, the remote control can be used to instantly suppress any warm or cool drafts. This
accurately assists how air flow is directed out of the indoor unit.
22
Motion sensor User
Energy saving control by detecting human moving
3 Step Control
New motion sensor (option) detects human activity.
Power Energy saving control is achieved by shift set
Control temperature according to detected amount of activity.
Unit will go on stand-by mode when no activity is

detected.
Stand by
When unit will detect activity again, unit will re-start
operation automatically.
Auto Off Unit will go off automatically when no activity is

detected for 12 hours.
Power Control Auto Off

【temperature】
26℃ 28℃
Activity：Low Activity：High Activity：Low None Auto off
eco
in cooling
26℃
ON
comfort
24℃
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24（hour）
Power Control Auto Off

【temperature】
22℃ 24℃
Activity：High Activity：Low Activity：High None Auto off
comfort
in heating
22℃
ON
eco
20℃
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24（hour）
Power Control Power Control Stand by Auto off

Increased energy savings Increased comfort Operation stops temporarily Operation stops completely
Low human activity High human activity Absence for 1 hour More 12 hours absence
Operation mode and eco operation Operation mode

Control of Motion sensor comfort operation Auto Cool Heat Dry Fan
+2℃
Low
Cooling
+2℃ +2℃ - -
Power Human Heating
+2℃
Control ※1 activity -2℃
High
Cooling
-2℃ -2℃ - -
Heating
-2℃
Auto Off ※2 ● ● ● ● ●
※1 Set temperature is revised maximum 2℃ at Cooling/Heating mode by detecting heat volume movement.
※2 Absence for 1 hour ⇒ Operation stops ( Stand-by ) More 12 hours absence ⇒ Operation stops completely
23
R410A
Builder Maintenance
Serviceability & workability

Easy and quick installation and maintenance Quick positioning !
Indoor unit is easily positioned and installed
1 Adjustable easier positioning of unit by new slits 2 New slit in panel allows easier installation on site.
New shape of slit is suitable to install the unit with more Flexible positioning is available, which helps adjusting the
flexibility, according to many kinds of suspending bolt direction of panel according to lines or pattern on the
pitch on site. ceiling.
Any rectangular or
Compatible with both square
squared pitch of or rectangular bolt pitch
suspending bolts are
available with this slit.
4 long slits are available.
Quick installation and maintenance

1 Easy access to component part for easy maintenance. 2 New shape of path of wiring
1 The control box and bell mouth 2 Easy access to impeller New shape of path gives easy wiring work for installation.
can be removed together. and fan motor.
Control box
Bell mouth
No need to remove screws to take off the controller

3 cover. 4 More safe installation by stopper of washer
It is possible to loose and slide open the cover without When unit is installed
remove of the screws. with hook between
This prevents the cover from falling and damaging to washers, this stopper
stuffs on site. helps to install the unit
safely, without adjusting
washer.
Separate the provisional Washer on
washer securing material. the upper side
e sd own
Slid hang
ver
The co
Loosen Loosen
Slide
24
Builder Maintenance
For smooth
and easy
working
Good help for installation and maintenance

1 Easy and flexible hook to remove the filter 2 Securely fix the corner lid by strap
Hook of soft material helps to The direction of the strap hook part has
remove the filter without dust been changed from longitudinal to lateral.
spreading. Furthermore, a barb has been added to
the hook pin to prevent the strap from
coming off.
Easy to hook
but
not easy to loose
Before After
Press the filter tab to the outside
and remove the filter.
3 Drain-up-lift increases up to 850 mm (previous:700mm) 4 New port to check drain water flow
The drain can be lifted up to 850 mm from the ceiling surface. A water supply port has been provided in
the piping lid for easier testing of the drain
water flow.
(The port is usually sealed with a rubber cap.)
700 Up to
mm 850 mm
Flexible hose
5 Re-use of packages during construction work 6 More flexible outlet for ducting
Package material (carton) help to protect the unit from Both φ125 and φ200 (oval shaped) are available.
unexpected welding spatter or coming dust to the new
unit.
φ125 φ125
φ200
φ200
25
R410A
Simple use with advanced settings REMOTE CONTROL

Easy touch and Easy view with full dot Liquid Crystal display
Bright screen
RC-EX1A
RC-EX3
26
New functions
Function Switch
The function switch allows you to select and set two functions that you desire
among the six available functions shown.
These functions can be used by simply pressing the button after they
are set, allowing you to use your preferable functions immediately.
Function switch Function switch
15
min 1 High Power Mode (F1) (F2)
High Power Mode achieve excessive cooling / heating capacity for 15 minutes to quickly adjust the room temperature to a comfortable level.
2 Energy Saving Mode

Temperature is set to optimized to save energy without losing comfort.
3 Quiet Mode
Outdoor unit starts to operate quietly by activating this mode. The time of this mode can be set in conjunction with Indoor Silent Timer.
4 Home Leave Mode

Home leave mode maintains the room temperature at a moderate level.
5 Favorite Mode
Operation mode, set temperature, fan speed and air flow direction are automatically adjusted to the programmed favorite setting.
Now
6 Filter Sign
Announces the due time for cleaning the air filter.
Favorite Mode Adjusting Brightness of the

Operation mode, set temperature, fan speed and air flow direction are Operation lamp
memorized and allocated to two buttons that can be operated by one touch.
The brightness of the operation lamp
behind Run/Stop switch can be adjusted
by 10 stages.
【e.g.】【e.g.】
【operation mode】
Operation mode Operation mode
cooling
Dry
Direction Fan speed Direction Fan speed
F1 Auto F2
Fan
Heating
Set temp Set temp
Draft prevention setting(only FDT series) Easy modification of Air Flow

User can enable/disable the motion of panel with anti draft User can visually confirm and set the direction of louvres
for each blow outlet for each operation mode. using the visual display on the remote controller.
No.3?
This is No.3!
27
R410A
Motion sensor control

Presence of humans and the amount of motion are detected by a motion sensor to perform various controls.
1 Select Enable / Disable 2 Select Enable / Disable per control

Motion sensor control ・Power control
・Auto-off
1
2
Select Enable / Disable for the

motion sensor of the indoor unit 3
connected to the R/C.
Enable／Disable Enable／Disable
i
H！
Backup Control
Control restricted to two indoor units (two groups)
Fault backup control Capacity backup control Rotational operation control
Reassurance C Comfort C Comfort

Energy
saving
Longer
unit life
Longer
unit life
Energy
saving
Keep back up all the time! Maintains users' comfort! Energy saving and longer life!
If one of the two indoor units malfunctions When the control system detects either of By operating two indoor units alternately,
and stops its operation, the other starts two units is operating with overload, the their chronological changes are equalized.
backup operation so that users' comfort other unit cover the capacity. (The alternate operation cycle can be
will not be compromised. specified in a range from 10 hours to 990
1 1
hours in increments of 10 hours.)
1
Remote control Remote control
Remote control
2 2
3 3
Additional functions of External Input / Output HOTEL
The external input/output of indoor unit by remote

HOTEL
controller can set input/output based on user’s demand.
Remote surveillance system Card key on-off
CNT (New)
External Input External Output 2 Output - Operation
- Heating
CNT (1-6) - Compressor ON (thermo-ON)
CNTA (1-2) 3 Output - Inspection
Input On/Off - Cooling (defrosting)
- Fan operation
Permission/Prohibition
Cooling/Heating 4 Output - Fan operation with Phi or Hi
- Fan operation with Me or Lo
Emergency Stop - Defrosting (oil return in heating operation)
Set temp. shift - Ventilation
Forced thermo-off 5 Output - Heater ON
Newly added IU operation stop - Free cooling
Silent mode
Newly added - IU overload alarm
28
Silent mode control Indoor unit capacity display
The Outdoor unit is controlled with priority on quietness. Capacities of Indoor units connected to the RC-EX3 are
Silent mode control must be set to the F1 or F2 switch. displayed.
User can start/stop the silent mode control with a single
tap of a button.
Timer START
No.000 Indoor unit

No. Capacity
000 80
Language Switching 80 001 112
002 140
User can select from the No.001
following languages:
English/German/French/ 112
Spanish/Italian/Dutch/
Turkish/Portugal/Russian/ No.002
Polish/Japanese/Chinese.
140
Contact company & Error display

If any error occurs on the air conditioner, the “Unit protection stop” is indicated on the message display.
“Error”
New Wireless Kit & New Wireless Remote Controller

Line-up The functions and the operations will be improved.
Model Wireless kit
FDT RCN-T-5AW-E2
FDTC RCN-TC-24W-E2
FDTW RCN-TW-E2 Display
FDTS RCN-TS-E2
FDK RCN-K-E2, RCN-K71-E2
FDE RCN-E-E2
FDFW RCN-FW-E2
FDTQ, FDU,FDUM, FDUT,
RCN-KlT4-E2
FDUH, FDFL, FDFU, FDU-F
Function added
1) High power
2) Energy-saving
3) ON/OFF Timer by clock
4) Child lock
5) Silent mode control for Outdoor unit
6) Home leave mode
29
R410A
Outdoor units
Heat pump systems
4, 5, 6HP (11.2kW~15.5kW)
Model No. Nominal Cooling Capacity
Blue
NEW
FDC112KXZEN1 11.2kW (220V)
Fin
FDC112KXZES1 11.2kW (380V)
• Connect up to 10* indoor units/up to 150% capacity.

• High efficiency with COP (in cooling) up to 4.44.
• These units employs DC inverter compressors ONLY.
• Industry leading total piping length up to 100m and a maximum pipe
run of 70m.
*When connecting 9 units or more, set the total capacity as follows : 5HP : 110% or less, 6HP : 100% or less.
Total length: 100m Range of operation

Outdoor unit 50
+43ºC
Height difference 40
30m(outdoor unit above)
15m(outdoor unit below)
30
Indoor unit Cooling
20
Max height +15.5ºC
difference between 10
indoor units: 15m
Indoor unit
0
Heating
-10
-15ºC
Furthest -20
indoor unit: 70m -20ºC
* The total length of ø9.52mm(3/8") liquid piping must be 50m or less
Specifications
Item Model FDC112KXZEN1 FDC140KXZEN1 FDC155KXZEN1 FDC112KXZES1 FDC140KXZES1 FDC155KXZES1
Nominal horse power 4HP 5HP 6HP 4HP 5HP 6HP
Power source 1 Phase 220-240V, 50Hz 3 Phase 380-415V, 50Hz
Starting current A 5
Max current A 23 23.3 13.5
Cooling 11.2 14.0 15.5 11.2 14.0 15.5
Nominal capacity kW
Heating 11.2 14.0 15.5 11.2 14.0 15.5
Power Cooling 2.52 3.96 5.20 2.52 3.96 5.20
Electrical characteristics kW
consumption Heating 2.57 3.66 4.28 2.57 3.66 4.28
Exterior dimensions HxWxD mm 845x970x370
Net weight kg 85 87
Sound pressure level Cooling/Heating dB(A) 52/55 53/57 54/57 52/55 53/57 54/57
Type / GWP R410A / 2088
Refrigerant
Charge kg/TCO2Eq 5.0 / 10.44
Liquid line ø9.52(3/8")
Refrigerant piping size mm(in)
Gas line ø15.88(5/8")
Capacity connection % 80~150
Number of connectable indoor units 8 10 * 10 * 8 10 * 10 *
1. The data are measured under the following conditions(ISO-T1). Cooling: Indoor temp. of 27ºCDB, 19ºCWB, and outdoor temp. of 35ºCDB. Heating: Indoor temp. of 20ºCDB, and outdoor temp. of 7ºCDB, 6ºCWB. Piping length is 7.5m.
2. Sound pressure level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
3. ‘tonne(s) of CO2 equivalent’ means a quantity of greenhouse gases- expressed as the product of the weight of the greenhouse gases in metric tonnes and of their global warming potential.
30
Refrigerant piping
Outdoor unit (HP) 4 5 6 Branch pipes Header pipe
Gas pipe Furthest indoor unit ø15.88

Liquid pipe =<70m ø9.52
DIS-22-1G HEAD4-22-1G
DIS-180-1G HEAD6-180-1G
Dimensions
All measurements in mm.
I II III
L1 Open Open 500
L2 300 5 Open
L3 150 300 150
L4 5 5 5
Mark Content Notes:

A Service valve connection (gas side) ø15.88 (5/8") (Flare) (1) It must not be surrounded by walls on the four sides.
(2) The unit must be fixed with anchor bolts. An anchor bolt must not protrude more than 15mm.
B Service valve connection (liquid side) ø9.52 (3/8") (Flare)
(3) Where the unit is subject to strong winds, lay it in such a direction that the blower outlet faces
C Pipe/cable draw-out hole perpendicularly to the dominant wind direction.
D Drain discharge hole ø20 x 3 places (4) Leave 1m or more space above the unit.
(5) A wall in front of the blower outlet must not exceed the units height.
E Anchor bolt hole M10 x 4 places (6) The model name label is attached on the lower right corner of the front panel.
F Cable draw-out hole ø30 x 3 places
〈For EU/EEA area only〉

Specification table
Based on European regulations listed below, please Outdoor unit FDC112KXZEN1/112KXZES1
refer the following specification table. Indoor unit FDT series only FDT series & others
Energy class(cooling/heating) A+/A+ C/A
No.626/2011 of 4 May 2011: energy labeling of
SEER 6.0 4.3
air-conditioners(below cooling capacity 12kW)
SCOP(Average climate) 4.2 3.8
No.206/2012 of 6 March 2012: requirement for Pdesignc kW 11.2
air-conditioners and comfort fans Pdesignh(@-10ºC) kW 9.6
Annual energy consumption(cooling/heating) kW 664/3212 910/3515
Sound power level dB(A) 69
Refrigerant (GWP) R410A (1975)
Designated heating season Average
Capacity combination % 96.4∼104.5
Number of connectable indoor units 7
R410A refrigerant contained in the products is a fluorinated greenhouse gas listed in Regulation (EU) No 517/2014.
31
R410A
Heat pump systems model

8, 10, 12HP (22.4kW~33.5kW) Blue
Fin
FDC224KXE6 22.4kW
FDC280KXE6 28.0kW
FDC335KXE6 33.5kW
• Connect up to 24 indoor units/up to 150% capacity.

• These units employ DC inverter compressors ONLY.
run of 160m.
Total length: 510m Outdoor unit Range of operation

50
To the Height difference +43ºC
first branch: 50m(outdoor unit above) 40
max 130m 40m(outdoor unit below)
Indoor unit
30
Max height Cooling

20
Indoor unit difference +15.5ºC
between 10
indoor units:
From the first Indoor unit 18m 0
branch to the Heating

furthest indoor -10
unit: 90m* Furthest -15ºC

-20
indoor unit: 160m -20ºC
* The difference between the longest and the shortest indoor unit piping
from the first branch must be within 40m.
Specifications
Item Model FDC224KXE6 FDC280KXE6 FDC335KXE6
Nominal horse power 8HP 10HP 12HP
Power source 3 Phase 380-415V, 50Hz
Max current A 20 23
Cooling 22.4 28.0 33.5
Nominal capacity kW
Heating 25.0 31.5 37.5
Power Cooling 5.60 8.09 9.82
consumption Heating 6.03 8.21 10.12
Net weight kg 221 224
Sound pressure level Cooling/Heating dB(A) 58/58 59/60 61/61
Type / GWP R410A / 2088
Refrigerant
Liquid line ø9.52(3/8") ø12.7(1/2")
Gas line ø19.05(3/4") ø22.22(7/8") ø25.4(1") [ø22.22(7/8")]
Number of connectable indoor units 22 24 24
4. [ ] : Pipe sizes applicable to European installations are shown in parentheses.
32
Refrigerant piping
Outdoor unit (HP) 8 10 12 Branch pipes Header pipe
Gas pipe Furthest indoor unit ø19.05 ø22.22 ø25.4(ø22.22)

Liquid pipe =<90m ø9.52 ø12.7
Gas pipe 90m ø22.22 ø25.4(ø22.22)
Liquid pipe =<Furthest indoor unit ø12.7 DIS-22-1G DIS-371-1G HEAD4-22-1G
DIS-180-1G HEAD6-180-1G
HEAD8-371-2
Dimensions
Notes:
I II III
*1 Figure in ( ) shows the value applicable
L1 Open Open 1500(500)*1 when the flex flow adaptor is installed.
*2 Under the setting condition as specified
L2 300 5 Open
in ( ), it is necessary to secure 250 mm
L3 300 300 300 for the dimension L4 when replacing the
51(48)*
L4 250(5)*2 250(5)*2 250(5)*2 compressor. Establish this for example

by moving the unit during the work.
640(634)*
*The value of 335 model in ( )
Mark Content 224 280 335 Notes:

(1) It must not be surrounded by walls on the four sides.
A Service valve connection of the (2) The unit must be fixed with anchor bolts. An anchor bolt
ø19.05 (3/4") (Flare) ø19.05 (3/4") (Flare) ø19.05 (3/4") (Flare)
attached connecting pipe (gas side) must not protrude more than 15mm.
B Service valve connection (liquid side) ø9.52 (3/8") (Flare) ø9.52 (3/8") (Flare) ø12.7 (1/2") (Flare) (3) Where the unit is subject to strong winds, the blower
outlet shoud face perpendicularly to the dominant wind
C Pipe/cable draw-out hole 4places 4places 4places direction.
D Drain discharge hole ø20 x 4places ø20 x 4places ø20 x 4places (4) Leave a 1m or more space above the unit.
E Anchor bolt hole M10 x 4places M10 x 4places M10 x 4places (5) A wall in front of the blower outlet must not exceed the
units height.
ø30 x 2places (front) ø30 x 2places (front) ø30 x 2places (front)
(6) The model name label is attached on the lower right
F Cable draw-out hole ø45 (side) ø45 (side) ø45 (side) corner of the front.
ø30 x 2places (back) ø30 x 2places (back) ø30 x 2places (back) (7) Connect the Service valve with local pipe by using the
Connecting position of the local pipe. pipe of the attachment.(Gas side only)
G ø19.05 (3/4")(Brazing) ø22.22 (7/8")(Brazing) ø25.4 (1")(Brazing) (8) Mark shows the connecting position of the local
(gas side)
pipe.(Gas side only)
33
R410A
KXZ Lite Heat pump systems

8, 10HP (22.4kW · 28.0kW)
Blue
FDC224KXZPE1 22.4kW Fin
FDC280KXZPE1 28.0kW

• These units employ DC inverter multiport compressors with
concentrated winding motor.
• KXZ Lite extends a cooling range operation up to 50ºC.
• External static pressure is available up to 35 Pa.
• Tropical usage mode.
Total length: 150m Range of operation

Outdoor unit +50ºC
50
To the Height difference 40

first branch: 30m(outdoor unit above)
Indoor unit 30
Cooling
20
Max height +15.5ºC
Indoor unit difference 10
between
indoor units: 0
From the first Indoor unit 18m Heating
branch to the -10
furthest indoor -15ºC

unit: 40m Furthest -20
-20ºC
indoor unit: 120m
Specifications
Item Model FDC224KXZPE1 FDC280KXZPE1
Nominal horse power 8HP 10HP
Max current A 21 22
Cooling 22.4 28.0
Nominal capacity kW
Heating 22.4 28.0
Power Cooling 5.6 7.87
consumption Heating 4.8 6.47
Net weight kg 165
Sound pressure level Cooling/Heating dB(A) 59/60 60/63
Type / GWP R410A / 2088
Refrigerant
Gas line ø19.05(3/4") ø22.22(7/8")
Number of connectable indoor units 8 8
34
Refrigerant piping
Outdoor unit (HP) 8 10 Branch pipes Header pipe
Gas pipe Furthest indoor unit ø19.05 ø22.22

Liquid pipe =<90m ø9.52
Gas pipe 90m ø22.22 ø25.4/ø28.58
Liquid pipe =<Furthest indoor unit ø9.52 DIS-22-1G HEAD4-22-1G
DIS-180-1G HEAD6-180-1G
Dimensions
Notes:
I II III
*1 At the time of the installation at ( )
L1 Open Open 500 dimension,
L2 300 5 Open Secure space of 250mm in lateral
(L4) by unit movement at the time
L3 150 300 150 of the exchange work of the
L4 250 (5)*1 250 (5)*1 250 (5)*1 compressor.
Mark Content Notes:

A Service valve connection of the (2) The unit must be fixed with anchor bolts.
ø19.05 (3/4") (Flare)
attached connecting pipe (gas side) An anchor bolt must not protrude more than 15mm.
B Service valve connection (liquid side) ø9.52 (3/8") (Flare) (3) Where the unit is subject to strong winds, lay it in such a direction that the
blower outlet faces perpendicularly to the dominant wind direction.
C Cable draw-out hole (front · side) ø30 x 2places (4) Leave 1m or more space above the unit.
D Cable draw-out hole (front · side) ø45 x 2places (5) A wall in front of the blower outlet must not exceed the units height.
E Cable draw-out hole (back) ø50 (6) The model name label is attached on the lower right corner of the front panel.
(7) Connect the Service valve with local pipe by using the pipe of the attachment.
F Pipe/cable draw-out hole 4places
(Gas side only) (Accessory pipe is used only by FDC280KXZPE1)
G Drain discharge hole ø20 x 3places (8) Regarding attaching the pipe of accessories, refer to an attached installation
H Anchor bolt hole M10 x 4places manual.
35
R410A
Heat pump systems

10, 12HP (28.0kW, 33.5kW)
FDC280KXZE1 28.0kW Blue
FDC335KXZE1 33.5kW Fin

• Industry leading total piping length up to 1000m and a maximum
pipe run of 160m. Uniform footprint of models (10,12HP)
allows continuous side-by-side installation
Total length: Outdoor unit

1000m
Range of operation
50
50m(outdoor unit above) 70m +46ºC
To the
first branch: 40
max 130m
Max height
30
between Cooling
indoor units: 20
+15.5ºC
Indoor unit 18m
From the first branch 10
to the furthest
indoor unit: 90m*
1
Furthest 0
indoor unit: Heating
160m -10
*1 The difference between the longest and the shortest indoor unit piping
-15ºC
-20
from the first branch must be within 40m. (MAX85m)
-20ºC
*2 In case of height difference up to 70m, please contact your dealer.
Height difference up to 90m is possible with High Head series.
Please refer to page66.
Specifications
Item Model FDC280KXZE1 FDC335KXZE1
Max current A 21.2
Cooling 28.0 33.5
Nominal capacity kW
Heating 31.5 37.5
Net weight kg 272
Type / GWP R410A / 2088
Refrigerant
Liquid line ø9.52(3/8") ø12.7(1/2")
Gas line ø22.22(7/8") ø25.4(1") [ø22.22(7/8")]
36
Dimensions
Mark Content 280 335 Installation example

A Refrigerant gas piping connection pipe ø22.22(Brazing) ø25.4(Brazing) Dimensions 1 2
B Refrigerant liquid piping connection pipe ø9.52(Flare) ø12.7(Flare) L1 500 Open
C Refrigerant piping exit hole ø88(or ø100) L2 10(30) 10(30)
D Power supply entry hole ø50 (right . left . front), long hole 40 x 80 (bottom) L3 100 100
F Anchor bolt hole M10 x 4 places L4 10(30) Open
G Drain waste water hose hole ø45 x 3 places H1 1500 Open
H Drain hole ø20 x 10 places H2 No limit No limit
K Refrigerant oil equalization piping connection pipe ø9.52(Flare) H3 1000 No limit
L Carrying in or hole for hanging 230 x 60 H4 No limit Open

() :In case it is the promised installation location
that the outdoor unit is used on conditions with
the ambient temperature of 43ºC or more.
Installation example
When more than one unit is installed Dimensions 1 2
Wall height
H3
L1 500 Open
L3 L2 10(30) 200
L3 100 300
Wall height
Wall height
L2 L5 L6 L4
H2
H4
L4 10(30) Open
L1 (Unit front side) L5 10(30) 400
Wall height
H1
L6 10(30) 400
H1 1500 Open
H2 No limit No limit
H3 1000 No limit
H4 No limit Open

37
R410A
Heat pump systems

14, 16, 17, 18, 20HP (40.0kW~56.0kW)
FDC400KXZE1 40.0kW
FDC450KXZE1 45.0kW
Blue
Fin
FDC475KXZE1 47.5kW
FDC500KXZE1 50.0kW
FDC560KXZE1 56.0kW

pipe run of 160m.
Uniform footprint of all models (from

14HP~20HP) allows continuous side-
by-side installation
Total length: Outdoor unit
1000m
Range of operation
50
50m(outdoor unit above) 70m +46ºC
To the
first branch: 40
max 130m
Max height
30
between Cooling
20
indoor units: +15.5ºC
Indoor unit 18m
to the furthest
indoor unit: 90m*
1
Furthest 0
indoor unit: Heating
160m -10
*1 The difference between the longest and the shortest indoor unit piping -20
-15ºC
-20ºC

Specifications
Item Model FDC400KXZE1 FDC450KXZE1 FDC475KXZE1 FDC500KXZE1 FDC560KXZE1
Nominal horse power 14HP 16HP 17HP 18HP 20HP
Starting current A 5 8
Max current A 32 42.4
Cooling 40.0 45.0 47.5 50.0 56.0
Nominal capacity kW
Heating 45.0 50.0 53.0 56.0 63.0
Power Cooling 10.96 13.98 13.98 13.97 16.62
consumption Heating 10.69 12.50 13.00 13.49 15.95
Sound pressure level Cooling/Heating dB(A) 60/62 61/62 61/61 61/62 64/66
Type / GWP R410A / 2088
Refrigerant
Gas line ø25.4(1") [ø28.58(1 1/8")] ø28.58(1 1/8")
Number of connectable indoor units 34 39 41 43 48
38
Dimensions
Mark Content 400 450, 475, 500, 560 Installation example

B Refrigerant liquid piping connection pipe ø12.7(Flare) L1 500 Open
C Refrigerant piping exit hole ø88(or ø100) L2 10(30) 10(30)
D Power supply entry hole ø50 (right . left . front), long hole 40 x 80 (bottom) L3 100 100

39
R410A
Heat pump combination systems

Blue
22, 24HP (61.5kW, 67.0kW) Fin

FDC615KXZE1 (FDC280+FDC335) 61.5kW

pipe run of 160m.
Uniform footprint of all
models (from 22HP, 24HP)
Max: 10m (oil equalizing pipe) allows continuous side-by-
side installation
1000m
Height difference *2 Range of operation
To the 50
Indoor unit 40m(outdoor unit below) +46ºC
first branch:
max 130m 40
Max height
30
between
indoor units: Cooling
18m 20
From the first branch Indoor unit +15.5ºC
to the furthest
indoor unit: 90m*
1 10
Furthest
indoor unit: 0
160m Heating
-10
from the first branch must be within 40m. (MAX85m) -15ºC
*2 In case of height difference up to 70m, please contact your dealer. -20

-20ºC
Specifications Exterior dimension : Please refer to page37.
Item Model FDC615KXZE1 FDC670KXZE1

280KXZE1 335KXZE1
Combination (FDC)
335KXZE1 335KXZE1
Max current A 42.4
Cooling 61.5 67.0
Nominal capacity kW
Heating 69.0 75.0
Net weight kg 544
Refrigerant charge R410A kg 11.0x2
Gas line ø28.58(1 1/8")
40
26, 28, 30, 32, 34, 36, 38, 40HP (73.5kW~112.0kW)
FDC735KXZE1 (FDC335+FDC400) 73.5kW Blue
FDC800KXZE1 (FDC400+FDC400) 80.0kW Fin

• These units employ DC inverter multiport compressors with concentrated winding motor.
• Industry leading total piping length up to 1000m and a maximum pipe run of 160m.
• In case of 26HP
1000m
Max: 5m
To the
50m(outdoor unit above) 70m Range of operation
first branch: 50
max 130m +46ºC
Max height
40
between
indoor units: 30
Indoor unit 18m Cooling

to the furthest +15.5ºC
indoor unit: 90m*
1
Furthest 10
indoor unit:
160m 0
*1 The difference between the longest and the shortest indoor unit piping -10
Heating
*2 In case of height difference up to 70m, please contact your dealer. -15ºC
Height difference up to 90m is possible with High Head series. -20
Please refer to page66. -20ºC
Specifications Exterior dimension : Please refer to page37,39.
Item Model FDC735KXZE1 FDC800KXZE1 FDC850KXZE1 FDC900KXZE1 FDC950KXZE1 FDC1000KXZE1 FDC1060KXZE1 FDC1120KXZE1
335KXZE1 400KXZE1 400KXZE1 450KXZE1 475KXZE1 500KXZE1 500KXZE1 560KXZE1
Combination (FDC)
400KXZE1 400KXZE1 450KXZE1 450KXZE1 475KXZE1 500KXZE1 560KXZE1 560KXZE1
Nominal horse power 26HP 28HP 30HP 32HP 34HP 36HP 38HP 40HP
Max current A 53.2 64 84.8
Cooling 73.5 80.0 85.0 90.0 95.0 100.0 106.0 112.0
Nominal capacity kW
Heating 82.5 90.0 95.0 100.0 106.0 112.0 119.0 126.0
Power Cooling 19.92 21.92 24.94 27.96 27.96 27.94 30.59 33.24
consumption Heating 19.73 21.38 23.19 25.00 26.00 26.98 29.44 31.90
Net weight kg 589 634 740
Refrigerant charge R410A kg 11.0+11.5 11.5x2
Liquid line ø15.88(5/8") ø19.05(3/4")
Gas line ø31.75(1 1/4") [ø34.92(1 3/8")] ø38.1(1 1/2") [ø34.92(1 3/8")]
41
R410A

42, 44, 46, 48HP (120.0kW~135.0kW)

Blue
FDC1200KXZE1 (FDC400+FDC400+FDC400) 120.0kW Fin
FDC1250KXZE1 (FDC400+FDC400+FDC450) 125.0kW

pipe run of 160m.
Total length: Outdoor unit Max: 0.4m Range of operation

1000m
50
+46ºC
To the 40
first branch:
max 130m 30
Max height
Cooling
between +15.5ºC
indoor units: 10
Indoor unit 18m
to the furthest 0
indoor unit: 90m*
1
Furthest Heating
indoor unit: -10
160m -15ºC
-20
-20ºC
* Height difference
2 In case of height difference up to 70m, please contact your dealer.
up to 90m is possible with High Head series.
Item Model FDC1200KXZE1 FDC1250KXZE1 FDC1300KXZE1 FDC1350KXZE1

400KXZE1 400KXZE1 400KXZE1 450KXZE1
Combination (FDC) 400KXZE1 400KXZE1 450KXZE1 450KXZE1
400KXZE1 450KXZE1 450KXZE1 450KXZE1
Nominal horse power 42HP 44HP 46HP 48HP
Max current A 96
Cooling 120.0 125.0 130.0 135.0
Nominal capacity kW
Heating 135.0 140.0 145.0 150.0
Power Cooling 32.88 35.90 38.92 41.94
consumption Heating 32.07 33.88 35.69 37.50
Net weight kg 951
Gas line ø38.1(1 1/2") [ø34.92(1 3/8")]
Capacity connection % 50-130
42
50, 52, 54, 56, 58, 60HP (142.5kW~168.0kW)

Blue
FDC1425KXZE1 (FDC475+FDC475+FDC475) 142.5kW Fin

pipe run of 160m.

1000m
50
+46ºC
To the 40
first branch:
max 130m 30
Max height
Cooling
between +15.5ºC
indoor units: 10
Indoor unit 18m
to the furthest 0
indoor unit: 90m*
1
Furthest Heating
indoor unit: -10
160m -15ºC
-20
-20ºC
* Height difference
2 In case of height difference up to 70m, please contact your dealer.
up to 90m is possible with High Head series.
Item Model FDC1425KXZE1 FDC1450KXZE1 FDC1500KXZE1 FDC1560KXZE1 FDC1620KXZE1 FDC1680KXZE1

475KXZE1 475KXZE1 500KXZE1 500KXZE1 500KXZE1 560KXZE1
Combination (FDC) 475KXZE1 475KXZE1 500KXZE1 500KXZE1 560KXZE1 560KXZE1
475KXZE1 500KXZE1 500KXZE1 560KXZE1 560KXZE1 560KXZE1
Max current A 127.2
Cooling 142.5 145.0 150.0 156.0 162.0 168.0
Nominal capacity kW
Heating 159.0 162.0 168.0 175.0 182.0 189.0
Power Cooling 41.94 41.93 41.91 44.56 47.21 49.86
Net weight kg 1110
Gas line ø38.1(1 1/2") [ø34.92(1 3/8")]
Capacity connection % 50-130
43
R410A
Hi-COP series
8~36HP(22.4kW~100.0kW)
Model No. Nominal Cooling Capacity Model No. Nominal Cooling Capacity
FDC224KXZXE1 22.4kW FDC450KXZXE1 (FDC224+FDC224) 45.0kW
FDC615KXZXE1 (FDC280+FDC335) 61.5kW
FDC670KXZXE1 (FDC335+FDC335) 67.0kW
FDC735KXZXE1 (FDC224+FDC224+FDC280) 73.5kW
High
Efficiency FDC850KXZXE1 (FDC280+FDC280+FDC280) 85.0kW
High
Higher
Energy
Economy
Saving
Blue
Blue Fin
Fin
• This series can connect indoor unit capacity

up to 160~200%.
kW capacity connection
22.4~45.0 200%
50.0~100.0 160%

• These units employ DC inverter multiport compressors FDC224KXZXE1 FDC280KXZXE1
with concentrated winding motor. FDC335KXZXE1
• Industry leading total piping length up to 1000m and a
maximum pipe run of 160m.

Range of operation
Total length: Outdoor unit Max: 0.4m 50
+46ºC
1000m
40
To the 30
first branch:
Cooling
max 130m 20
Max height +15.5ºC
10
between
indoor units:
0
Indoor unit 18m
From the first branch Heating
to the furthest
indoor unit: 90m*
-10
1
Furthest -15ºC
indoor unit: -20
-20ºC
160m
44
Specifications
Item Model FDC224KXZXE1 FDC280KXZXE1 FDC335KXZXE1
Power source 3Phase 380-415V, 50Hz
Max current A 21.2 32
Cooling 22.4 28.0 33.5
Nominal capacity kW
Heating 25.0 31.5 37.5
Exterior dimensions HxWxD mm 1690x1350x720 2048x1350x720
Sound pressure level Cooling / Heating dB(A) 56/57 56/56 62/57
Type / GWP R410A / 2088
Refrigerant
Charge kg/TCO2Eq 11.0 / 22.968 11.5 / 24.012
Liquid line ø9.52(3/8") ø12.7(1/2")
Gas line ø19.05(3/4") ø22.22(7/8") ø25.4(1")[ø22.22(7/8")]
Capacity connection % 200
Item Model FDC450KXZXE1 FDC500KXZXE1 FDC560KXZXE1 FDC615KXZXE1 FDC670KXZXE1

224KXZXE1 224KXZXE1 280KXZXE1 280KXZXE1 335KXZXE1
Combination (FDC)
224KXZXE1 280KXZXE1 280KXZXE1 335KXZXE1 335KXZXE1
Max current A 42.4 53.2 64
Cooling 45.0 50.0 56.0 61.5 67.0
Nominal capacity kW
Heating 50.0 56.0 63.0 69.0 75.0
Power Cooling 10.0 11.8 13.9 15.6 17.4
consumption Heating 11.1 12.3 13.7 15.2 16.8
Net weight kg 560 605 650 650 650
Refrigerant charge R410A kg 11.0x2 11.0+11.5 11.5x2
Refrigerant piping size Gas line mm(in) ø28.58(1 1/8")
Oil equalization ø9.52(3/8")
Capacity connection % 200 160
Item Model FDC735KXZXE1 FDC800KXZXE1 FDC850KXZXE1 FDC900KXZXE1 FDC950KXZXE1 FDC1000KXZXE1

224KXZXE1 224KXZXE1 280KXZXE1 280KXZXE1 280KXZXE1 335KXZXE1
Combination (FDC) 224KXZXE1 280KXZXE1 280KXZXE1 280KXZXE1 335KXZXE1 335KXZXE1
280KXZXE1 280KXZXE1 280KXZXE1 335KXZXE1 335KXZXE1 335KXZXE1
Max current A 74.4 85.2 96
Cooling 73.5 80.0 85.0 90.0 95.0 100.0
Nominal capacity kW
Heating 82.5 90.0 95.0 100.0 106.0 112.0
Power Cooling 17.1 19.3 21.1 22.7 24.3 25.9
Electrical characteristics consumption kW
Heating 18.2 19.7 20.6 21.9 23.5 25.1
Net weight kg 885 930 975 975
Refrigerant charge R410A kg 11.0x2+11.5 11.0+11.5x2 11.5x3
Refrigerant piping size Gas line mm(in) ø31.75(1 1/4")[ø34.92(1 3/8")] Ø38.1(1/2")[ø34.92(1 3/8")]
Oil equalization ø9.52(3/8")
Capacity connection % 160
Number of connectable indoor units 78 80 80 80 80 80
45
R410A
Dimensions
FDC224KXZXE1
Mark Content 224 Installation example

A Refrigerant gas piping connection pipe ø19.05 (Brazing) Dimensions 1 2
B Refrigerant liquid piping connection pipe ø9.52 (Flare) L1 500 Open
C Refrigerant piping exit hole ø88 (or ø100) L2 10(30) 10(30)
D Power supply entry hole ø50 (Right . Left . Front), Long hole 40 x 80 (Bottom) L3 100 100
K Refrigerant oil equalization piping connection pipe ø9.52 (Flare) H3 1000 No limit

46
FDC280KXZXE1, 335KXZXE1
Mark Content 280 335 Installation example

A Refrigerant gas piping connection pipe ø22.22 (Brazing) ø25.4 (Brazing) Dimensions 1 2
B Refrigerant liquid piping connection pipe ø9.52 (Flare) ø12.7 (Flare) L1 500 Open
C Refrigerant piping exit hole ø88 (or ø100) L2 10(30) 10(30)
D Power supply entry hole ø50 (Right . Left . Front), Long hole 40 x 80 (Bottom) L3 100 100

47
R410A
Heat recovery systems

- for simultaneous heating and cooling
The heat recovery systems operate with 3 inter-connecting pipes, thus commonly referred to as a '3-pipe system'.
The systems provide both heating and cooling operations to individual indoor units according to the room condition/requirement.
The systems incorporate highly sophisticated control to condition multiple indoor areas, whatever their requirement for cooling or heating, for applications
where the building orientation (N, S, E, W) can mean that heat gain/loss varies on each side of the building.
The range starts with a 22.4kW cooling capacity, up to 20HP with 56.0kW cooling capacity. Outdoor units can also be “twinned” or “tripled” providing up to
60HP/168.0kW on a single system.

The system interconnecting pipework has a unique arrangement, with two of the interconnecting pipes routed through a PFD Distribution Controller, and the
third pipe connected directly to each indoor unit from the main pipe run. This reduces installation time, and the number of brazed connections on site. The
PFD Distribution Controllers are available for single connection, or as a combined PFD 4-way connection, with each connected unit having independent cooling
or heating operation.
During defrosting or during automatic protection

of a compressor, which is activated every several
hours in heating operation, heating operation
temporarily stops and restarts after some period.
The series has the same automatic protection of
compressor in cooling operation also. During
this protection period air flow only comes on and
cooling operation restarts after some period.
This model is not suitable for the usage of

annual cooling operation such as for the server
room, especially in the area where the outdoor
air temperature becomes below 5ºC. In case of
mixed operation in cooling and heating mode
Cooling and heating balanced operation
below 5ºC of outdoor air temperature, the
cooling capacity may decrease in comparison
with that for the operation only in cooling mode.
48
New features
- Improve energy efficiency
- Expand Line-up up to 60HP
Previous Model NEW KXZRE1
Up to 48HP Up to 60HP
- Additional Hi-COP combination.

- High efficiency in mixed cooling and heating mode.
Heat recovery systems KXZRE1
22.4kW 28.0kW 33.5kW
8HP 10HP 12HP
FDC224KXZRE1 FDC280KXZRE1 FDC335KXZRE1
40.0kW 45.0kW 47.5kW 50.0kW 56.0kW 61.5kW 67.0kW

14HP 16HP 17HP 18HP 20HP 22HP 24HP
FDC400KXZRE1 FDC450KXZRE1 FDC475KXZRE1 FDC500KXZRE1 FDC560KXZRE1 FDC615KXZRE1 FDC670KXZRE1
73.5kW 80.0kW 85.0kW 90.0kW 95.0kW 100.0kW 106.0kW 112.0kW

26HP 28HP 30HP 32HP 34HP 36HP 38HP 40HP
FDC735KXZRE1 FDC800KXZRE1 FDC850KXZRE1 FDC900KXZRE1 FDC950KXZRE1 FDC1000KXZRE1 FDC1060KXZRE1 FDC1120KXZRE1
FDC735 FDC800~1120
FDC1200KXZRE1 FDC1250KXZRE1 FDC1300KXZRE1 FDC1350KXZRE1 FDC1425KXZRE1 FDC1450KXZRE1 FDC1500KXZRE1 FDC1560KXZRE1 FDC1620KXZRE1 FDC1680KXZRE1
FDC1200~1680
Heat recovery systems Hi-COP combination KXZRXE1

45.0kW 50.0kW 56.0kW 61.5kW 67.0kW
FDC450KXZRXE1 FDC500KXZRXE1 FDC560KXZRXE1 FDC615KXZRXE1 FDC670KXZRXE1
FDC224KXZRE1 FDC224KXZRE1 FDC280KXZRE1 FDC280KXZRE1 FDC335KXZRE1
FDC450~670 FDC224KXZRE1 FDC280KXZRE1 FDC280KXZRE1 FDC335KXZRE1 FDC335KXZRE1
73.5kW 80.0kW 85.0kW 90.0kW 95.0kW 100.0kW

26HP 28HP 30HP 32HP 34HP 36HP
FDC735KXZRXE1 FDC800KXZRXE1 FDC850KXZRXE1 FDC900KXZRXE1 FDC950KXZRXE1 FDC1000KXZRXE1
FDC224KXZRE1 FDC224KXZRE1 FDC280KXZRE1 FDC280KXZRE1 FDC280KXZRE1 FDC335KXZRE1
FDC224KXZRE1 FDC280KXZRE1 FDC280KXZRE1 FDC280KXZRE1 FDC335KXZRE1 FDC335KXZRE1
FDC735~1000 FDC280KXZRE1 FDC280KXZRE1 FDC280KXZRE1 FDC335KXZRE1 FDC335KXZRE1 FDC335KXZRE1
49
R410A
High eff iciency in mixed cooling and heating mode

Highly efficient operation mode is automatically determined inside the refrigerant system during simultaneous cooling and heating operation.
Heat recovery efficiency is maximized by this control and Max COP 9.0 (*) is achieved during operation with simultaneous cooling and heating.
* Conditions for simultaneous cooling and heating (Our estimation in 8HP operation and the following conditions: Temperature outside the room DB16°C/WB12°C,
temperature in the cooled room DB27°C/19°C, and temperature in the heated room DB20°C/WB14.5°C)
Energy efficiency in heat recovery mode

100 9
Operating capacity in cooling/heating (%)
Cooling 8
7
PFD
6
Cooling
EER/COP
5
50
4 4HP
PFD
Heating 3
2
1
PFD
0
(ex.) Indoor ambient 23.5℃DB/17.5℃
0 Heating
Outdoor ambient 16℃DB/12℃WB
4HP
(Condition) FDC224KXZRE1
PFD
50% Indoor unit in cooling (27℃DB/19℃)
Max COP > 9.0 50% Indoor unit in heating (20℃DB/14.5℃)
Outdoor ambient 16℃DB/12℃WB
High Efficiency
The below graphs highlight the improved efficiencies between the previous models compared to the KXZR standard and Hi-COP models.
Previous model
Comparison of EER in Cooling Mode KXZR
EER KXZR Hi-COP
4.50
4.30
4.10
3.90
3.70
3.50
3.30
3.10
2.90
2.70
2.50
224 280 335 400 450 475 500 560 615 670
MODEL
Comparison of COP in Heating Mode

COP
5.00
4.80
4.60
4.40
4.20
4.00
3.80
3.60
3.40
3.20
224 280 335 400 450 475 500 560 615 670
MODEL
50
Improved Features
New Heating Solution - Continuous Heating Capacity Control (CHCC) -
New defrosting control achieves more capacity than that of previous model in low ambient temperature condition.
Target pressure is controlled automatically before capacity drops, which makes longer period of heating operation and shorter defrosting time.
(*1) Patent is now under being applied. (*2) This control will be activated in specific condition. Please refer to the technical manual in detail.
Improved cooling capacity in low ambient temperature

Small split heat exchanger and pressure control inside make it possible that outdoor unit can operate in cooling operation even with low ambient temperature
condition, which achieves more capacity in such low ambient condition at -5℃, compared to previous model.
Previous model KXZRE1
Upper/Middle split heat

exchanger can achieve more 4 surface heat
Two split heat exchanger.
precise pressure control even exchanger make its size
when low capacity is required. smaller.
In previous model, when high demand for heating and low cooling * The numeric values are provisional.
demand are required at the same time in low ambient temperature Blown air temperature in the cooled room
condition, pressure control is adjusted to keep more heating capacity
Previous model During simultaneous cooling and heating operation
than good enough cooling capacity.
KXZRE1 at an outside temperature of -5°C.
New adopted heat exchanger and pressure control in KXZR series,
has improved its capacity for both good enough heating and cooling
capacity at the same time. (*)
(*) Refrigerant system will priorities required heating mode more

than very low cooling demand, in case most of indoor units are
operated in heating mode.
Time
Improvement to the shunt controller noise level

Sound insulation box design specification, reducing the level of noises from the Sound insulation design
shunt controller generated due to the flow of refrigerant or other causes.
Design Flexibility
Indoor unit capacity connection Connectable indoor units
HP KXZR HP KXZRX • In case that capacity connection is more than 130%, Up to 91 indoor units can be connected to the
additional charge of refrigerant is required on site.
8~16 200% 16 200% largest capacity outdoor unit, with a range of 17
• In case of 8-34HP of the systems, if one or more types of exposed or concealed indoor unit, in
indoor units of FDK, FDFL,FDFU and/or FDFW series
17~34 160% 18~34 160% are connected to the system, the total connecting several capacities, a choice of 91 indoor units is
36~60 130% 36 130% capacity of indoor units should not exceed 130%. available.
Wide Range of Operation Heating

-20ºC +15.5ºC
KXZR series permits an extensible system design considering
a heating range operation under a low temperature condition
down to -20˚C and a cooling range operation up to 46˚C Cooling
(previous model : 43˚C) -15ºC +46ºC
-20 -10 0 10 20 30 40 50
51
R410A
Heat recovery 3-pipe systems

8, 10, 12HP(22.4kW – 33.5kW) - for simultaneous heating and cooling
FDC224KXZRE1 22.4kW Blue
FDC280KXZRE1 28.0kW Fin
FDC335KXZRE1 33.5kW
• Connect up to 44 indoor units / up to 200% capacity.

• High efficiency with COP(in cooling)up to 4.3.
• These units employ DC inverter multiport compressors with concentrated
winding motor.
• Industry leading total piping length up to 1000m and a maximum pipe run Uniform footprint of all models (from
of 160m. 8HP~24HP) allows continuous side-

50
To the Height difference +46ºC
Indoor unit
30
Max height Cooling

20
between 10
indoor units:
Indoor unit 18m 0
From the first Heating
branch to the -10
furthest indoor Furthest -15ºC
unit: 90m* indoor unit: 160m
-20
-20ºC
Specifications
Item Model FDC224KXZRE1 FDC280KXZRE1 FDC335KXZRE1
Max current A 16.0 20.0 21.2
Cooling 22.4 28.0 33.5
Nominal capacity kW
Heating 22.4 28.0 33.5
Net weight kg 289
Type / GWP R410A / 2088
Refrigerant
Liquid line ø9.52(3/8”) ø12.7(1/2”)
Refrigerant piping size Suction Gas line mm(in) ø19.05(3/4”) ø22.22(7/8”) ø25.4(1”) [ø22.22(7/8")]
Discharge Gas line ø15.88(5/8”) ø19.05(3/4”)
1. The data are measured under the following conditions(ISO-T1). Cooling: Indoor temp. of 27ºCDB, 19ºCWB, and outdoor temp. of 35ºCDB. Heating: Indoor temp. of 20ºCDB, and outdoor temp. of 7ºCDB, 6ºCWB.
52
Dimensions
Mark Content 224 280 335

A Refrigerant suction gas piping connection entrance ø19.05(Brazing) ø22.22(Brazing) ø25.4(Brazing)
B Refrigerant liquid piping connection entrance ø9.52(Flare) ø12.7(Flare)
C Refrigerant discharge gas piping connection entrance ø15.88(Brazing) ø19.05(Brazing)
D Power supply entry hole ø50(right . left . front),long hole 40x80(Bottom)
F Anchor bolt hole M10 x 4 places
G Drain waste water hose hole ø45 x 3 places
H Drain hole ø20 x 10 places
K Refrigerant oil equalization piping connection entrance ø9.52(Flare)
L Carrying in or hole for hanging 230x60
N Refrigerant piping exit hole ø88(or ø100)
Dimensions 1 2
L1 500 Open
L2 10(30) 10(30)
L3 100 100
L4 10(30) Open
H1 1500 Open
H3 1000 No limit
H4 No limit Open

53
R410A
Heat recovery 3-pipe systems

14, 16, 17, 18, 20, 22, 24HP (40.0kW – 67.0kW)
FDC400KXZRE1 40.0kW Blue
FDC450KXZRE1 45.0kW
Fin
FDC475KXZRE1 47.5kW
FDC500KXZRE1 50.0kW
FDC560KXZRE1 56.0kW
FDC615KXZRE1 61.5kW
FDC670KXZRE1 67.0kW
• Connect up to 71 indoor units / up to 160% capacity.(400.450KXZRE1:200%)

winding motor. Uniform footprint of all models (from
• Industry leading total piping length up to 1000m and a maximum pipe run of 8HP~24HP) allows continuous side-
160m.

50
+46ºC
To the Height difference
Indoor unit
30
Cooling
Max height 20
+15.5ºC
between 10
indoor units:
Indoor unit 18m 0
From the first Heating

branch to the -10
furthest indoor -15ºC

Furthest
unit: 90m* indoor unit: 160m
-20
-20ºC
Specifications
Item Model FDC400KXZRE1 FDC450KXZRE1 FDC475KXZRE1 FDC500KXZRE1 FDC560KXZRE1 FDC615KXZRE1 FDC670KXZRE1
Nominal horse power 14HP 16HP 17HP 18HP 20HP 22HP 24HP
Max current A 30.0 32.0 40.4 41.0 41.6 42.0 42.4
Cooling 40.0 45.0 47.5 50.0 56.0 61.5 67.0
Nominal capacity kW
Heating 40.0 45.0 47.5 50.0 56.0 61.5 63.0
Power Cooling 11.55 14.45 14.82 15.19 18.31 21.35 25.51
consumption Heating 9.76 11.38 11.58 12.7 14.33 16.15 17.47
Sound pressure level Cooling/Heating dB(A) 60/62 61/62 64/65 65/66
Type / GWP R410A / 2088
Refrigerant
Liquid line ø12.7(1/2”)
Refrigerant piping size Suction Gas line mm(in) ø25.4(1”)[ø28.58(1 1/8”)] ø28.58(1 1/8”)
Discharge Gas line ø22.22(7/8”) ø25.4(1”) [ø22.22(7/8")]
Capacity connection % 50~200 50~160
Number of connectable indoor units 53 60 50 53 59 65 71
54
Dimensions
Mark Content 400 450 475 500 560 615 670

ø25.4
A Refrigerant suction gas piping connection entrance (Brazing) ø28.58(Brazing)
B Refrigerant liquid piping connection entrance ø12.7(Flare)
C Refrigerant discharge gas piping connection entrance ø22.22(Brazing) ø25.4(Brazing)
D Power supply entry hole ø50(right . left . front),long hole 40x80(Bottom)
F Anchor bolt hole M10 x 4 places
G Drain waste water hose hole ø45 x 3 places
H Drain hole ø20 x 10 places
K Refrigerant oil equalization piping connection pipe ø9.52(Flare)
L Carrying in or hole for hanging 230x60
N Refrigerant piping exit hole ø88(or ø100)
Dimensions 1 2
L1 500 Open
L2 10(30) 10(30)
L3 100 100
L4 10(30) Open
H1 1500 Open
H3 1000 No limit
H4 No limit Open

55
R410A
Heat recovery 3-pipe combination systems

26, 28, 30, 32HP (73.5kW – 90.0kW)
Blue
Model No. Nominal Cooling Capacity Fin
FDC735KXZRE1 (FDC335+FDC400) 73.5kW

winding motor.
run of 160m.
Max: 10m (oil equalizing pipe) • In case of 26HP

1000m
Height difference
Max: 5m 50m(outdoor unit above)
To the Range of operation
first branch: 50
max 130m +46ºC
Max height
40
between
indoor units: 30

indoor unit: 90m* Furthest 10
indoor unit:
160m 0
* The difference between the longest and the shortest indoor unit piping Heating
from the first branch must be within 40m. (MAX85m) -10
-15ºC
-20
-20ºC
Specifications *Exterior dimension : Please refer to page 53,55.

Item Model FDC735KXZRE1 FDC800KXZRE1 FDC850KXZRE1 FDC900KXZRE1
335KXZRE1 400KXZRE1 400KXZRE1 450KXZRE1
Combination (FDC)
Max current A 51.2 60.0 62.0 64.0
Cooling 73.5 80.0 85.0 90.0
Nominal capacity kW
Heating 73.5 80.0 85.0 90.0
Power Cooling 21.2 23.1 26.0 28.9
consumption Heating 17.9 19.5 21.1 22.8
Refrigerant piping size Suction Gas line mm(in) ø31.75(1 1/4”)[ø34.92(1 3/8”)]
Discharge Gas line ø25.4(1”)[ø28.58(1 1/8”)] ø28.58(1 1/8”)
56
34, 36, 38, 40HP (95.0kW – 112.0kW)
Model No. Nominal Cooling Capacity Blue
FDC950KXZRE1 (FDC475+FDC475) 95.0kW Fin
• Connect up to 80 indoor units / up to 130% capacity.(950KXZRE1:160%)

winding motor.
run of 160m.

1000m
Height difference
To the Range of operation
first branch: 50
max 130m +46ºC
Max height
40
between
indoor units: 30

indoor unit: 90m* Furthest 10
indoor unit:
160m 0
* The difference between the longest and the shortest indoor unit piping Heating
from the first branch must be within 40m. (MAX85m) -10
-15ºC
-20
-20ºC
Specifications
*Exterior dimension : Please refer to page 55.
Item Model FDC950KXZRE1 FDC1000KXZRE1 FDC1060KXZRE1 FDC1120KXZRE1
Combination (FDC)
Max current A 80.8 82.0 82.6 83.2
Cooling 95.0 100.0 106.0 112.0
Nominal capacity kW
Heating 95.0 100.0 106.0 112.0
Power Cooling 29.6 30.4 33.5 36.6
Heating 23.2 24.3 26.5 28.7
Net weight kg 820
Liquid line ø15.88(5/8”) ø19.05(3/4”)
Refrigerant piping size Suction Gas line mm(in) ø31.75(1 1/4”)[ø34.92(1 3/8”)] ø38.1(1 1/2”)[ø34.92(1 3/8”)]
Discharge Gas line ø28.58(1 1/8”) ø31.75(1 1/4”)[ø28.58(1 1/8”)]
57
R410A

42, 44, 46, 48, 50HP (120.0kW – 142.5kW)
- for simultaneous heating and cooling Blue
Fin
FDC1200KXZRE1 (FDC400+FDC400+FDC400) 120.0kW

winding motor.
run of 160m.

1000m Range of operation
50
Height difference +46ºC
To the
Indoor unit 40m(outdoor unit below) 40
first branch:
max 130m
30
Max height
Indoor unit difference Cooling
between 20
+15.5ºC
indoor units:
Indoor unit 18m 10
to the furthest
indoor unit: 90m*
0
Furthest
Heating
indoor unit: -10
160m -15ºC
* The difference between the longest and the shortest indoor unit piping -20
-20ºC
Specifications
Item Model FDC1200KXZRE1 FDC1250KXZRE1 FDC1300KXZRE1 FDC1350KXZRE1 FDC1425KXZRE1
400KXZRE1 400KXZRE1 400KXZRE1 450KXZRE1 475KXZRE1
Combination (FDC) 400KXZRE1 400KXZRE1 450KXZRE1 450KXZRE1 475KXZRE1
Max current A 90.0 92.0 94.0 96.0 121.2
Cooling 120.0 125.0 130.0 135.0 142.5
Nominal capacity kW
Heating 120.0 125.0 130.0 135.0 142.5
Power Cooling 34.65 37.55 40.45 43.35 44.46
Heating 29.28 30.90 32.52 34.14 34.74
Discharge Gas line ø31.75(1 1/4”)[ø28.58(1 1/8”)]
58
52, 54, 56, 58, 60HP (145.0kW – 168.0kW)
- for simultaneous heating and cooling Blue
Fin
FDC1620KXZRE1 (FDC500+FDC560+FD560) 162.0kW

winding motor.
run of 160m.

1000m Range of operation
50
Height difference +46ºC
To the
Indoor unit 40m(outdoor unit below) 40
first branch:
max 130m
30
Max height
Indoor unit difference Cooling
between 20
+15.5ºC
indoor units:
Indoor unit 18m 10
to the furthest
indoor unit: 90m*
0
Furthest
Heating
indoor unit: -10
160m -15ºC
* The difference between the longest and the shortest indoor unit piping -20
-20ºC
Specifications
Item Model FDC1450KXZRE1 FDC1500KXZRE1 FDC1560KXZRE1 FDC1620KXZRE1 FDC1680KXZRE1
Combination (FDC) 475KXZRE1 500KXZRE1 500KXZRE1 560KXZRE1 560KXZRE1
Max current A 121.8 123.0 123.6 124.2 124.8
Cooling 145.0 150.0 156.0 162.0 168.0
Nominal capacity kW
Heating 145.0 150.0 156.0 162.0 168.0
Power Cooling 44.83 45.57 48.69 51.81 54.93
Heating 35.33 36.51 38.67 40.83 42.99
Net weight kg 1230
Discharge Gas line ø31.75(1 1/4”)[ø28.58(1 1/8”)]
59
R410A
Heat recovery 3-pipe Hi-COP combination systems

16, 18, 20, 22, 24HP (45.0kW~67.0kW)
Blue
Model No. Nominal Cooling Capacity Fin
FDC450KXZRXE1 (FDC224+FDC224) 45.0kW
• Connect up to 70 indoor units/up to 160% capacity.(450KXZRXE1:200%)

winding motor.
run of 160m.

1000m
50
+46ºC
Height difference
To the 40
first branch:
max 130m 30
Max height
Cooling
between +15.5ºC
indoor units: 10
Indoor unit 18m
to the furthest 0
indoor unit: 90m* Furthest Heating
indoor unit: -10
160m -15ºC
-20
-20ºC
Item Model FDC450KXZRXE1 FDC500KXZRXE1 FDC560KXZRXE1 FDC615KXZRXE1 FDC670KXZRXE1

Combination (FDC)
Max current A 32.0 36.0 40.0 41.2 42.4
Cooling 45.0 50.0 56.0 61.5 67.0
Nominal capacity kW
Heating 45.0 50.0 56.0 61.5 67.0
Power Cooling 10.29 12.53 14.76 17.02 19.28
Heating 9.24 10.81 12.38 14.31 16.24
Net weight kg 578
Refrigerant piping size Gas line mm(in) ø28.58(1 1/8")
Dischance Gas line ø22.22(7/8") ø25.4(1")[ø22.22(7/8")]
Capacity connection % 80-200 80-160
60
Heat recovery 3-pipe Hi-COP combination systems
26, 28, 30, 32, 34, 36HP (73.5kW~100.0kW)
FDC735KXZRXE1 (FDC224+FDC224+FDC280) 73.5kW Blue
FDC800KXZRXE1 (FDC224+FDC280+FDC280) 80.0kW Fin
FDC850KXZRXE1 (FDC280+FDC280+FDC280) 85.0kW
FDC1000KXZRXE1(FDC335+FDC335+FDC335) 100.0kW
• Connect up to 80 indoor units/up to 160% capacity.(1000KXZRXE1:130%)

winding motor.
• Industry leading total piping length up to 1000m and a maximum pipe run
of 160m.

1000m
50
+46ºC
Height difference
To the 40
first branch:
max 130m 30
Max height
Cooling
between +15.5ºC
indoor units: 10
Indoor unit 18m
to the furthest 0
indoor unit: 90m* Furthest Heating
indoor unit: -10
160m -15ºC
-20
-20ºC
Item Model FDC735KXZRXE1 FDC800KXZRXE1 FDC850KXZRXE1 FDC900KXZRXE1 FDC950KXZRXE1 FDC1000KXZRXE1

224KXZRE1 224KXZRE1 280KXZRE1 280KXZRE1 280KXZRE1 335KXZRE1
Combination (FDC) 224KXZRE1 280KXZRE1 280KXZRE1 280KXZRE1 335KXZRE1 335KXZRE1
280KXZRE1 280KXZRE1 280KXZRE1 335KXZRE1 335KXZRE1 335KXZRE1
Max current A 52.0 56.0 60.0 61.2 62.4 63.6
Cooling 73.5 80.0 85.0 90.0 95.0 100.0
Nominal capacity kW
Heating 73.5 80.0 85.0 90.0 95.0 100.0
Power Cooling 17.67 19.91 22.14 24.40 26.66 28.92
Net weight kg 867
Refrigerant piping size Gas line mm(in) ø31.75(1 1/4") [ø34.92(1 3/8")] ø38.1(1 1/2") [ø34.92(1 3/8")]
Dischance Gas line ø25.4(1") [ø28.58(1 1/8")] ø28.58(1 1/8")
Capacity connection % 80-160 80-130
61
R410A
PFD refrigerant flow

branch control
Relay kit
(Relay kit comes attached
Branch control Total downstream indoor unit capacity to the branch control)
PFD1124-E less than 11.2kW
PFD1804-E less than 18.0kW
PFD2804-E 28.0kW or less
PFD1124X4-E less than 44.8kW(less than 11.2kWx4 branches)
4-Way PFD box
*Pictures on this page are images.
Design flexibility Branch control Total downstream capacity *Connectable indoor units
PFD1124-E less than 112 1-5
Groups of indoor units can be connected up to a total
PFD1804-E 112 or more but less than 180 1-8
capacity 44.8kW to a single PFD with branch piping and
all units in that group will operate in the same mode PFD2804-E 180 or more but less than 280 1-10
only (cooling or heating). PFD1124X4-E less than 371(less than 112 per branch) Up to 20
*Refer to Data Book for details
We also have introduced the 4-way PFD control
PFD1124X4-E which can connect up to four indoor
units with individual control - simultaneous cooling or
heating. PFD1124-E PFD1124-E PFD1124X4-E PFD1124-E
90 56 36 56 36 90
28 90
• The remote control setting (as individual indoor unit on-off, temperature • In case of the mode changeover from cooling to heating and from cooling
setting other than cooling/heating mode control) is possible with one to heating, by the use of only the indoor units and PFD box combination,
remote control connected to each indoor unit, while at the same time, the mode changeover sound was reduced. All this made possible without
Center Control (SC-SL1N/2NA/4-AE) can be used together with the turning off the compressor and at the same time without the reduction of
individual remote control. capacity.
• It is necessary to set the central control to use this function.
Please refer to the Installation Manual for details. • The risk of refrigerant leakage was reduced by changing piping connection
at the PFD box to brazing method.
Same mode (Heating or Cooling)
Individual on-off, temperature setting
• By the use of optional PFD box extension cable that has a connector at
ends, makes it possible to further separate the indoor unit and PFD box.
PFD
This will enable the PFD box to be located away from the indoor unit and
Heating help reduce the influence of sound caused by PFD box and refrigerant flow.
Heating
PFD
Heating
Cooling
SC-SL1N/2NA/4-AE
Easy installation central control Power cable 240v AC
New PFD design means the The PFD is connected to the
relay kit
connection of the indoor unit liquid Outdoor discharge gas pipe gas pipe indoor unit by 3 core signal wire PFD Indoor
unit
pipe is made directly to the liquid via a relay kit (supplied) to be unit
line - bypassing the PFD. This PFD

located within 2m of each other. 240v AC 12v DC
means (x2) less pipe connections controller The indoor unit however can be
Indoor
per indoor unit, reducing suction gas pipe
unit
up to 40m away. Power to the
up to 2m
installation time and cost. PFD can be connected from the
liquid pipe up to 40m
indoor unit or other supply.
62
Dimensions PFD1124-E
PFD1804-E
PFD2804-E
PFD1124X4-E
63
R410A
Water cooled series

8~36HP (22.4~100.0kW)
FDC224KXZWE1 22.4kW FDC730KXZWE1(FDC224×2+FDC280) 73.0kW
FDC280KXZWE1 28.0kW FDC775KXZWE1(FDC224+FDC280×2) 77.5kW
FDC335KXZWE1 33.5kW FDC850KXZWE1(FDC280×3) 85.0kW
FDC450KXZWE1(FDC224×2) 45.0kW FDC900KXZWE1(FDC280×2+FDC335) 90.0kW
FDC500KXZWE1(FDC224+FDC280) 50.0kW FDC950KXZWE1(FDC280+FDC335×2) 95.0kW
FDC560KXZWE1(FDC280×2) 56.0kW FDC1000KXZWE1(FDC335×3) 100kW
FDC615KXZWE1(FDC280+FDC335) 61.5kW
FDC670KXZWE1(FDC335×2) 67.0kW
Features Applicable to
1. High efficiency (EER/COP) 1. High-rise Building 2. Glass-exterior facade Building
• Energy saving Reduction of operation cost! - 50m <FDC> , -100m <FDCH> - Possible to hide KXZW units
- 100m or higher in height <FDCW> and to keep fine sight
2. Compact design
• Easy transportation and installation
• Elevator carrying
3. BMS (Building Management System)
• Can use the same BMS as air-cooled KX
• Available to large-scale and fine control
4. Serviceability & Maintenance
• Service and maintenance of main parts
can be done from the front side only 8, 10, 12HP 16, 18, 20, 22, 24HP 26, 28, 30, 32, 34, 36HP
• Useful service tools (Mente-PC, SL-Checker etc.)
Specifications
Item Model FDC224KXZWE1 FDC280KXZWE1 FDC335KXZWE1 FDC450KXZWE1 FDC500KXZWE1 FDC560KXZWE1 FDC615KXZWE1 FDC670KXZWE1
- - - 224KXZWE1 224KXZWE1 280KXZWE1 280KXZWE1 335KXZWE1
Combination (FDC)
- - - 224KXZWE1 280KXZWE1 280KXZWE1 335KXZWE1 335KXZWE1
Nominal horse power 8HP 10HP 12HP 16HP 18HP 20HP 22HP 24HP
Cooling 22.4 28.0 33.5 45.0 50.0 56.0 61.5 67.0
Nominal capacity kW
Heating 25.0 31.5 37.5 50.0 56.0 63.0 69.0 75.0
Cooling 4.23 5.75 8.13 8.49 9.83 11.5 13.7 16.3
Power consumption kW
Heating 4.24 5.10 6.30 8.47 9.27 10.2 11.4 12.6
EER Cooling 5.3 4.9 4.1 5.3 5.1 4.9 4.5 4.1
COP Heating 5.9 6.2 6.0 5.9 6.0 6.2 6.1 6.0
Exterior dimensions HxWxD mm 1100x780x550 (1100x780x550)x2
Sound pressure level dB(A) 48 50 52 50 52 53 54 55
Net weight kg 185 185x2
Item Model FDC730KXZWE1 FDC775KXZWE1 FDC850KXZWE1 FDC900KXZWE1 FDC950KXZWE1 FDC1000KXZWE1

224KXZWE1 224KXZWE1 280KXZWE1 280KXZWE1 280KXZWE1 335KXZWE1
Combination (FDC) 224KXZWE1 280KXZWE1 280KXZWE1 280KXZWE1 335KXZWE1 335KXZWE1
280KXZWE1 280KXZWE1 280KXZWE1 335KXZWE1 335KXZWE1 335KXZWE1
Cooling 73.0 77.5 85.0 90.0 95.0 100
Nominal capacity kW
Heating 82.5 90.0 95.0 100 106 112
Cooling 14.2 15.5 17.5 19.5 21.7 24.3
Power consumption kW
Heating 13.8 14.8 15.4 16.4 17.6 18.8
EER Cooling 5.1 5.0 4.9 4.6 4.4 4.1
COP Heating 6.0 6.1 6.2 6.1 6.0 6.0
Exterior dimensions HxWxD mm (1100x780x550)x3
Sound pressure level dB(A) 54 54 55 56 56 57
Net weight kg 185x3
The data is based on the rating condition:
Cooling: Indoor temp. of 27 °C DB,19 °C WB, and heat source unit inlet water temp. of 30 °C, water flow rate 96 L/min
Heating: Indoor temp. of 20 °C DB,15 °C WB, and heat source unit inlet water temp. of 20 °C, water flow rate 96 L/min
64
Heat source units on every floor Heat source units in the machine room
- New building projects - - Renovation projects -
Total piping length : 510m Total piping length : 510m
Max height difference

Water piping Water piping between indoor units:
Cooling tower
Cooling tower 15m
Refrigeration piping 40m

Height difference
between heat source
unit and indoor unit
(heat source unit below)
Indoor unit
Machine room
To the Height
first branch: difference
Heat source
max 130m 50m
unit
From the first

branch to the
furthest indoor
unit: 90m
Furthest indoor unit Furthest indoor unit
from the heat source unit : 160m from the heat source unit : 160m
Dimensions
VIEW A
A
Piping size
Mark Content FDC-KXZWE1 FDC224KXZWE1 FDC280KXZWE1 FDC335KXZWE1 Connection method
Dimension
A High/low gas line Refer to piping size 224,280 335 High/low gas line ø19.05 ø22.22 ø25.4 Flange
B - Not to use. C1 142 139 Liquid line ø9.52 ø9.52 ø12.7
Flare
C Liquid line C2 322 316 Oil equalization line ø9.52 ø9.52 ø9.52
Refer to piping size
D Oil equalization line
F Water inlet R1 1/4 Installation
example 1
G Water outlet R1 1/4 Dimension
H Drain outlet Rp 1/2,2places L1 600 or more
J Power source intake ø35 L2 20 or more
K Signal wiring intake ø35 L3 500 or more
L Anchor bolt hole ø18,4places L4 20 or more
L5 300 or more
65
R410A
High Head series (90m)

14~48HP (40.0~136.0kW)
FDCH335KXE6-K 33.5 kW FDCH735KXE6 (FDCH335-K+FDCH400) 73.5 kW
FDCH400KXE6 40.0 kW FDCH800KXE6 (FDCH400x2) 80.0 kW
FDCH450KXE6 45.0 kW FDCH850KXE6 (FDCH400+FDCH450) 85.0 kW
FDCH560KXE6-K 56.0 kW FDCH1010KXE6 (FDCH504x2) 101.0 kW
FDCH335KXE6-K & FDCH560KXE6-K are only used for combining with other models. FDCH1180KXE6 (FDCH560-K+FDCH615) 118.0 kW
FDCH1235KXE6 (FDCH615x2) 123.5 kW
• Maximum allowable height difference between the outdoor and FDCH1300KXE6 (FDCH615+FDCH680) 130.0 kW
the indoor unit located at the lowest height position has been FDCH1360KXE6 (FDCH680x2) 136.0 kW
increased from 50m to 90m.
(When the outdoor unit is located at higher position than the
Blue
indoor unit) Fin
Blue
Fin
FDCH335KXE6-K
FDCH400KXE6
FDCH450KXE6 FDCH504~680KXE6
Max: 10m Outdoor

Total length: unit Max height difference:
1000m *1 0.4m Range of operation
50
Height +43ºC
Max: 5m difference
To the 40
Indoor unit 50~90m
first branch: *3
30
max 130m
Max height Cooling
20
From the first between 10
branch to the indoor units: Heating
furthest Indoor unit 15m 0
indoor unit: -5ºC -5ºC
90m *2 -10
Furthest
indoor unit : 160m -20
*1 Select the total pipe length depending on the connectable capacity of indoor units.
Outdoor units' capacity A = Max. connectable capacity of indoor units (%)
Connectable
*2 The difference between the longest and shortest indoor unit piping
capacity
400~450 150%
504~960 140% from the first branch must be within 40m.
1010~1360 130%
*3 In case of less than 50m, the High Head models can not be applied.
A%
In case Indoor unit is higher than outdoor unit, the High Head models
can not be applied.
130%
100%
300 m 510 m 1000 m Total pipe length
66
Specifications
Item Model FDCH400KXE6 FDCH450KXE6 FDCH504KXE6 FDCH560KXE6 FDCH615KXE6 FDCH680KXE6
Max current A 47
Cooling kW 40.0 45.0 50.4 56.0 61.5 68.0
Nominal capacity
Heating kW 45.0 50.0 56.5 63.0 69.0 73.0
Cooling kW 11.27 12.97 14.73 16.79 20.37 24.98
Electrical characteristics Power consumption
Heating kW 11.73 13.10 15.12 16.79 18.48 19.08
Type / GWP R410A / 2088
Refrigerant
Sound pressure level Cooling / Heating dB(A) 59.5 / 59.5 62.5 / 62.5 61.5 / 61.5 63.0 / 63.0 64.5 / 64.5 65.0 / 65.0
Liquid line ø12.7(1/2") ø15.88(5/8")
Gas line ø25.4(1") [ø28.58(1 1/8")] ø28.58(1 1/8") ø28.58(1 1/8")
Number of connectable indoor units 36 40 36 40 44 49
Item Model FDCH735KXE6 FDCH800KXE6 FDCH850KXE6 FDCH900KXE6

335KXE6-K 400KXE6 400KXE6 450KXE6
Combination (FDCH)
400KXE6 400KXE6 450KXE6 450KXE6
Max current A 94
Cooling kW 73.5 80.0 85.0 90.0
Nominal capacity
Heating kW 82.5 90.0 95.0 100.0
Cooling kW 20.21 22.54 24.24 25.94
Heating kW 20.66 23.46 24.83 26.20
Net weight kg 336x2
Gas line ø31.8(1 1/4") [ø34.92(1 3/8")]
Number of connectable indoor units 53 58 61 65

450KXE6 504KXE6 504KXE6 560KXE6
Combination (FDCH)
504KXE6 504KXE6 560KXE6 560KXE6
Max current A 94
Cooling kW 96.0 101.0 106.5 113.0
Nominal capacity
Heating kW 108.0 113.0 119.5 127.0
Cooling kW 27.70 29.46 31.52 33.58
Heating kW 28.22 30.24 31.91 33.58
Net weight kg 336+358 358x2
Liquid line ø19.05(3/4") ø22.22(7/8")
Gas line ø31.8(1 1/4")[ø34.92(1 3/8")] ø38.1(1 1/2")

560KXE6-K 615KXE6 615KXE6 680KXE6
Combination (FDCH)
615KXE6 615KXE6 680KXE6 680KXE6
Max current A 94
Cooling kW 118.0 123.5 130.0 136.0
Nominal capacity
Heating kW 132.0 138.0 142.0 146.0
Cooling kW 37.16 40.74 45.35 49.96
Heating kW 35.27 36.96 37.56 38.16
Net weight kg 377x2
Gas line ø38.1(1 1/2")
67
R410A
Dimensions
FDCH335KXE6-K, 400KXE6, 450KXE6
Mark Content 335-K 400 450 Installation example

C Refrigerant piping exit hole ø88(or ø100) L2 10 10
D Power supply entry hole ø50 (right . left . front), long hole 40 x 80 (Bottom) L3 100 100
F Anchor bolt hole M10 x 4 places L4 10 Open
Notes: When more than one unit is installed Installation example

(1) The unit must be fixed with anchor bolts.
(2) Leave a 2m or larger space above the unit. Wall height
Dimensions A B
H3
(3) The unit name plate is attached on the lower right corner of L1 500 Open
the front panel. L3
(4) The ports for refrigerant pipe and power cable penetrations L2 10 200
Wall height
Wall height
L2 L5 L6 L4
are covered with half-blanks. Please cut off a half-blank with
H2
H4
L3 100 300
nippers in using these ports.
(5) Use a ø88 port for refrigerant pipe connection. L1 (Unit front side) L4 10 Open
(6) Anchor holes marked “L J” (four holes for M10) are for a Wall height
H1 L5 0 400
renewal installation.
(7) The oil-equalising pipe K should be used when outdoor units L6 0 400
are used in combination. (For 14,16HP only) H1 1500 No limit
H3 1000 No limit
68
Dimensions
FDCH504KXE6, 560KXE6, 560KXE6-K, 615KXE6, 680KXE6
Mark Content Installation example

A Refrigerant gas piping connection pipe ø28.58(Brazing) Dimensions 1 2
C Refrigerant piping exit hole ø88(or ø100) L2 10 10
D Power supply entry hole ø50 (right . left . front), long hole 40 x 80(Bottom) L3 100 100
F Anchor bolt hole M10 x 4 places L4 10 Open
Notes:
(1) The unit must be fixed with anchor bolts.
(2) Leave a 2m or larger space above the unit.
(3) The unit name plate is attached on the lower right corner of
the front panel.
(4) The ports for refrigerant pipe and power cable penetrations
are covered with half-blanks. Please cut off a half-blank with
nippers in using these ports.
(5) Use a ø88 port for refrigerant pipe connection.
(6) Anchor holes marked “L J” (four holes for M10) are for a
renewal installation.
(7) The oil-equalising pipe K should be used when outdoor units
are used in combination.
69
R410A
Refresh series
8, 10HP(22.4kW • 28.0kW)
If replacing a used unit with a new one, these units can reuse existing piping. Blue
Fin
FDCR224KXE6 22.4kW
FDCR280KXE6 28.0kW
<Option>
FDCR-KIT-E : Service valve kit
• Applies to a wide range of pipe sizes (R22, R407C, R410A standard size).
• Meets to a short period of renewal installation.
• Savings on replacement expenses such as scrapping waste material or procuring new pipe.
• Possible to replace the existing unit with a new larger capacity unit.
• Possible to replace plural systems with one system.
For example:Existing 5HP x 2units can be replaced with a new 10HP x 1unit.
5HP x 2 10HP x 1
Note: FDUT15KXE6F-E, FDTC15KXE6F and FDK15KXZE1

can not be connected to the above systems.
Total length: 510m
Outdoor unit
Range of operation
To the Height difference
first branch: 50m(outdoor unit above)
50
Indoor unit +43ºC

40
Max height 30
From the first Cooling

+15.5ºC
branch to the between
furthest indoor indoor units: 10
unit: 90m 15m

Indoor unit 0
Heating
-10
-15ºC
Furthest -20
-20ºC
indoor unit: 160m
Specifications
Item Model FDCR224KXE6 FDCR280KXE6
Max current A 20
Cooling 22.4 28.0
Nominal capacity kW
Heating 25.0 31.5
Heating 6.03 8.21
Net weight kg 224
Type / GWP R410A / 2088
Refrigerant
Liquid line ø9.52(3/8")~ø15.88(5/8")
Gas line ø19.05(3/4")~ø25.4(1") ø22.22(7/8")~ø28.58(11/8")
70
Advanced refresh function
When the existing unit is operable
The existing pipe can be reused by cooling operation only.
Pipe refresh kit and Service valve kit are not required.
1.Implement cooling operation of all indoor units for more than 30 minutes.
2.Implement pump-down after cooling operation.
3.Recover refrigerant and remove the existing outdoor unit and indoor unit.
When the existing unit is not operable 7-segment display

Pipe refresh kit
(FDCR-KIT-E)
The existing pipe can be reused by washing
operation after connecting Refresh outdoor units,
Pipe refresh kit and Service valve kit.
Piping system
Connecting and removing of Refresh outdoor units outdoor unit
indoor unit
and Pipe refresh kit is very easy by use of flexible heat exchanger
pipe and flanges.

high Service valve kit
efficiency
strainer
1.Pipe washing operation is implemented by changing compressor accumulator
dip switch on the outdoor unit PCB. Pipe refresh kit
2.Completing washing is monitored via 7-segment high efficiency refrigerant flow

display on the outdoor unit PCB. strainer
oil separator easy local connection (flexible pipe)

3.As washing operation is about 60 minutes, it can remove the pipe refresh kit after cleaning the used pipe
meet to a required short period of renewal

installation.
Dimensions
All measurements in mm. Service valve kit
Mark Content Notes:

A Service valve connection of the attached connecting pipe (gas side) ø19.05 (3/4") (Flare) (2) The unit must be fixed with anchor bolts. An anchor bolt must not
B Service valve connection (liquid side) ø12.7 (1/2) (Flare) protrude more the 15mm.
C Pipe/cable draw-out hole 4places (3) Where the unit is subject to strong winds, lay it in such a direction that the
blower outlet faces perpendicularly to the dominant wind direction.
D Drain discharge hole ø20 x 4places (4) Leave 1m or more space above the unit.
E Anchor bolt hole M10 x 4places (5) A wall in front of the blower outlet must not exceed the units height.
F1 Cable draw-out hole ø30 (6) The model name label is attached on the lower right corner of the front.
(7) Connect the Service valve with local pipe by using the pipe of the
F2 Cable draw-out hole ø45 attachment.(Gas side only)
F3 Cable draw-out hole ø22 (8) Mark shows the connecting position of the local pipe.(Gas side only)
F4 Cable draw-out hole ø34
G Connecting position of the local pipe. (gas side) ø25.4 (1")(Brazing)
71
R410A
Refrigerant piping
Installation of Interconnecting Pipework
KXZ/KX6 equipment is manufactured to the highest standards of quality and reliability. It is imperative the method of installation and the materials used are
also to high standards, to ensure trouble free operation and long term reliability.
The interconnecting pipework must be installed by a competent and trained engineer. Refrigeration quality copper tube must be used, soft copper coils or
half-hard straight lengths. The refrigeration quality tube must be soft drawn seamless high grade copper pipe. The copper tube must be selected taking into
account the higher operating pressures of R410A refrigerant, and that high pressures will occur throughout the system because of the reverse cycle operation.
All pipework material used should be EN12735 European standard.
The supplied branch pipe kits, must be used to make connections to indoor units, and the supplied manifold kits must be used to make connections between
outdoor units (where applicable); it is not permitted to use standard fittings such as elbows, tees etc. The branch pipes shall be installed in accordance with
the manufacturer’s instructions, allowing unrestricted flow of refrigerant, and in accordance with European standard E378.
All brazed joints shall be made with dry nitrogen purge to ensure the prevention of oxidisation to the internal surface of the copper pipes.
The ingress of moisture, dirt and any other contaminants to the interior of the copper pipes, and air conditioning units, must be prevented during the
installation procedure.
After the installation of pipework, prior to the connection of the outdoor units, and sealing of insulation joints, the pipework must be pressure tested for
leakage, using dry nitrogen.
Additional Refrigerant
Additional R410A refrigerant only shall be used, and must be charged by weight only, using electronic scales. The amount of additional refrigerant must be
accurately calculated from the manufacturer’s data, based on the length and diameter of each section of the liquid refrigerant pipework of the system.
The products contains fluorinated greenhouse gases covered by Kyoto protocol.
Standard (Outdoor unit side branching pipe – Indoor unit side first branching pipe) Branch pipes Header pipe
If the longest distance (measured between the outdoor unit and the farthest indoor unit) is
90m or longer (actual length), please change the main pipe size according to the table below.
Outdoor Main pipe size (normal) Pipe size for an actual length of 90m or longer mm inch
unit Gas pipe Liquid pipe Gas pipe Liquid pipe ø9.52 3/8"
280 ø22.22 × t 1.0 ø9.52 × t 0.8 ø12.7 1/2"
335 ø25.4 (ø22.22) × t 1.0 ø25.4 (ø22.22) × t 1.0 DIS-22-1G/DIS-180-1G HEAD6-180-1G
ø12.7 × t 0.8 ø15.88 5/8"
400 ø25.4 (ø28.58) × t 1.0 ø28.58 × t 1.0 Combination outdoor unit manifold
450 ø19.05 3/4"
475 ø12.7 × t 0.8 ø22.22 7/8"
500 ø31.8 × t 1.1
ø28.58 × t 1.0 (ø28.58 × t 1.0) ø15.88 × t 1.0 ø25.4 1"
560
615
670 mm inch
735 ø28.58 11/8"
800 DIS-371-1G/DIS-540-3 DOS-2A-3
ø31.8 × t 1.1 ø31.8 11/4" DOS-3A-3
850 (ø34.92 × t 1.2) ø15.88 × t 1.0 ø19.05 × t 1.0
900 ø34.92 13/8"
950 ø38.1 11/2"
Horizontally
1000
1060 ø44.5 13/4" Good
Floor
1120 ø50.8 2"
1200 ø38.1 × t 1.35
1250 (ø34.92 × t 1.2)
1300 No Good
ø38.1 × t 1.35
1350 (ø34.92 × t 1.2) ø22.22 × t 1.0
1425 ø19.05 × t 1.0 Vertically
Floor
1450
1500
1560 Floor
No
1620
1680
Please use C1220T-1/2H for ø19.05 or larger pipes. Floor
Pipe sizes applicable to European installations are shown in parentheses.
Single outdoor unit piping examples:
Piping arrangement using

Piping arrangement using header branch pipe kits
HEAD8-371-2
90 90 56 56 36 36 36 36 56 56 36 36 36 112 112 112
72
Combination outdoor unit piping examples:
Piping arrangement using header
Piping arrangement using Oil equalisation

branch pipe kits pipe HEAD8-540-3
Outdoor unit branch
Oil equalisation
piping set (DOS-2A-3)
pipe
Outdoor unit branch

piping set (DOS-2A-3)
112 112 90 90 90 140 140 140 112 112 90 90 90 140 140 140
Outdoor unit's branch piping set Indoor unit's first branch piping set
Outdoor unit Branch piping set Total capacity of Header set
Branch piping set
For two units (for 615~1120) DOS-2A-3 indoor units Model Branches
For three units (for 1200~1680) DOS-3A-3 ~179 DIS-22-1G HEAD4-22-1G Max 4 branches
180~370 DIS-180-1G HEAD6-180-1G Max 6 branches
371~539 DIS-371-1G HEAD8-371-2 Max 8 branches
540~ DIS-540-3 HEAD8-540-3 Max 8 branches

Branch pipes
If the longest distance (measured between the outdoor unit and the farthest indoor unit) is 90m or longer
(actual length), please change the main pipe size according to the table below. mm inch mm inch
※Even if the longest distance exceeds 90m (actual length), you need not change the size of discharge gas pipes. ø9.52 3/8" ø28.58 11/8"
Main pipe size (normal) Pipe size for an actual length of 90m or longer ø12.7 1/2" ø31.8 11/4"
Outdoor
unit Suction gas pipe Discharge gas pipe Liquid pipe Suction gas pipe Discharge gas pipe Liquid pipe ø15.88 5/8" ø34.92 13/8"
224 ø19.05×t1.0 ø15.88×t1.0 ø22.22×t1.0 ø15.88×t1.0
ø9.52×t0.8 ø19.05 3/4" ø38.1 11/2"
280 ø22.22×t1.0
335 ø25.4 (ø22.22)×t1.0
ø19.05×t1.0 ø25.4 (ø22.22)×t1.0 ø19.05×t1.0
ø12.7×t0.8 ø22.22 7/8" ø44.5 13/4" DIS-22-1-RG/DIS-180-1-RG
400 ø25.4 (ø28.58)×t1.0 ø28.58×t1.0 ø25.4 1" ø50.8 2"
450 Combination outdoor unit manifold
475 ø22.22×t1.0 ø12.7×t0.8 ø22.22×t1.0
500 ø31.8×t1.1
ø28.58×t1.0 ø15.88×t1.0
560 (ø28.58×t1.0)
615
ø25.4 (ø22.22)×t1.0 ø25.4 (ø22.22)×t1.0
670
735 ø28.58 (ø25.4)×t1.0
800
850 ø31.8×t1.1 DOS-2A-3-R
(ø34.92×t1.2) ø15.88×t1.0 ø28.58×t1.0 ø19.05×t1.0
900 ø28.58×t1.0
950 Horizontally
1000
1060
1120 ø38.1×t1.35
Good
1200 (ø34.92×t1.2) Floor
1350
ø38.1×t1.35
1425 ø31.8×t1.1 ø31.8×t1.1
(ø34.92×t1.2) ø19.05×t1.0 ø22.22×t1.0
1450 (ø28.58×t1.0) (ø28.58×t1.0) Good No
1500
1560 Vertically
1620 Floor
1680
Please use C1220T-1/2H for ø19.05 or larger pipes. Pipe sizes applicable to European installations. Floor
No
Single outdoor unit piping examples: Floor
PFD1124-E PFD1124-E PFD1124X4-E PFD1124-E PFD1124X4-E PFD1124-E PFD1124X4-E PFD2804-E
90 56 36 56 36 90 56 36 56 36 56 36 90 140
28 90 28 90 28 90
73
R410A
Combination outdoor unit piping examples:
Oil equalisation
pipe(1)
Outdoor unit's branch piping set
Outdoor unit branch PFD1124-E PFD1124X4-E PFD2804-E PFD1124-E
piping set (DOS-2A-3-R) Outdoor unit Branch piping set
2 units (for 735~1120) DOS-2A-3-R
3 units (for 1200~1680) DOS-3A-3-R
90 56 36 140 90 90
Indoor unit's first branch piping set
28 90 Total capacity of indoor units Branch piping set
~179 DIS-22-1-RG
180~370 DIS-180-1-RG
371~539 DIS-371-2-RG
540~ DIS-540-2-RG
For Down Stream of PFD box
Total capacity of indoor units Branch piping set
Oil equalisation ~179 DIS-22-1G
pipe(1)
180~370 DIS-180-1G
Outdoor unit branch PFD1124X4-E PFD1124X4-E PFD1124-E PFD1124-E 371~539 DIS-371-1G
piping set (DOS-2A-3-R)
540~ DIS-540-3
56 36 56 56 36 90 90
28 90 28 90
Electrical wiring – power supply

KXZ/KX6 includes greatly simplified wiring requirements utilising a ‘polarity-free’ two wire control loop connecting the indoor units.
Power wiring
Cables can be laid through the front, right, left or bottom of the outdoor unit casing.
Separate power supplies should be used for the outdoor unit (3Phase) and the indoor units (1Phase).
Only control wiring is connected from outdoor to indoor unit.
Outdoor unit power supply: 3 Phase 4 wiring 380-415V Distributed, separate power supply system
Earth leakage breaker A Power cable (Main Power cable)[4 cores]

(Impulse withstanding type) Outdoor unit B Signal wire (Super Link wire)[2 cores]
C Power cable (Indoor unit power cable)
Grounding [2 cores]
Circuit breaker
wire
for cabling D Remote control cord
[2 cores]
A A
B B
Circuit breaker
for cabling
Indoor unit
Earth leakage breaker
D
R R R R R R Remote control unit
Indoor unit power supply: Single Phase 220-240V CAUTION

If the earth leakage breaker is exclusively for ground fault protection,
then you will need to install a circuit breaker for wiring work.
74
Electrical wiring – control wiring
1. The control wiring is 5 Volt DC, (1) When one outdoor unit is used
non-polarised, two wire connection
notated as ‘A1’ and ‘B1’. This ‘AB’ wiring Outdoor signal line A1 B1
Indoor and outdoor signal lines do not have a polarity.
Any of the connections in the following illustration can be made.
connects outdoor unit to indoor unit and terminal block
indoor unit to indoor unit.
A1 A A1 A
2. This wiring must be a 2-core shielded
cable size 0.75mm2 or 1.25mm2. Indoor signal line A B A B A B B1 B B1 B
0.75mm2 1.25mm2 terminal block
~1000m YES YES
1000~1500m YES NO
(2) When plural outdoor units are used
3. We recommend the both ends of the
shield of the cable are connected to Outdoor unit Outdoor unit Outdoor unit Outdoor unit Network connector
ground (earth) at all the indoor units and
outdoor units.
A1·B1 A2·B2 A1·B1 A2·B2 A1·B1 A2·B2 A1·B1 A2·B2
4. When plural outdoor units are used,
.Connect the signal cable between indoor
and outdoor units and the signal cable Indoor unit Indoor unit
between outdoor units belonging to the A A
same refrigerant line to A1 and B1. B B
.Connect the signal line between outdoor
units on different refrigerant lines to A2 Refrigerant pipe
Indoor unit Indoor unit
and B2.
A A
5. For current specification of 2-core (AB) B B
wiring, please consult your dealer. Signal line
The maximum number of indoor units that can be connected in a system is 128 and it is possible to configure
outdoor units and/or indoor units as an outdoor or indoor unit group connected with each other with two wires.
(3) The signal lines can also be connected using the method shown below.
Important Loop wiring prohibited

Outdoor unit Outdoor unit Outdoor unit
Outdoor unit Outdoor unit Outdoor unit Outdoor unit
The signal lines cannot form a loop,

Indoor unit Indoor unit Indoor unit so the wirings shown as
in the diagram are prohibited.
Indoor unit Indoor unit Indoor unit Indoor unit Indoor unit Indoor unit Indoor unit
Remote control wiring specifications

For interconnecting wiring between the remote control Outdoor unit
and indoor units (XY wiring) use 2-core cable size
0.3mm2. The maximum length of 2-core cable is 600 A B
metres. Where the 2-core wiring exceeds 100m, use the
wire size detailed on the table below.
A B A B A B A B
Indoor unit Indoor unit Indoor unit Indoor unit
Length (m) Wire size
100 to 200 0.5mm2 x 2 core
Wires can be connected
To 300 0.75mm2 x 2 core
Remote control across different refrigerant
To 400 1.25mm2 x 2 core systems when wired within
1 Superlink system
To 600 2.0mm2 x 2 core
75
R410A
Indoor units
Benefits Summary When using RC-EX3 (Remote control), functions with symbol
However, for RC-E5 (Remote control), functions with
are available.
are not available.
Inverter control technology functions at high efficiency with smooth operation from high speed to low speed.
Inverter technology A smooth sine voltage wave is attained.
Since the capacity is controlled automatically based on the outdoor temperature, energy can be saved without
Economy
Energy-saving losing comfort.

When the unit is not used for a long period of time, the room temperature is maintained at a moderate level,
Home leave operation avoiding extremely hot or cool temperatures.
Set temperature auto return The temperature automatically returns to the previously set temperature.
Automatic operation The air conditioner automatically selects from among heating, cooling operations.
Silent mode
Comfort
The unit can be set to prioritise the period of time it operates at a lower noise level.
When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to
Draught prevention low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.
The high power operation adjusts the room temperature quickly to a pleasant level by increasing the operation capacity.
Hi power mode The high power operation continues for 15 minutes at maximum and returns to the normal operation automatically.
Flap control system Motion range (upper and lower limit positions) of the flap at each air outlet can be set at a desired range
individually.
Vertical auto swing

Air flow
Flap moves up and down continuously. The Up/Down flap swing can be fixed at the preferred operation angle.
Ceiling stain prevention The shape & angled louver redirects the air current away from the ceiling reducing ceiling stains.
Automatic fan speed The micro-computer automatically adjusts the airflow effectively to follow the changes of return air temperature.
Set the time period from start to stop of operation. The selectable range of setting time is from 30 to 240 minutes
Sleep timer
(at 10-minute intervals).
Timer
Capacity control can be set by using peak cut function on RC-EX3 for better energy saving.
Peak-cut timer Five-step capacity control is available.
Weekly timer On or Off timer can be set on a weekly basis.
The function switch allows you to select and set two functions among six available functions.
Function Switch
(Cannot be used when a centralied control remote is connected)
Favorite setting Operation mode, set temperature, fan speed and air flow direction automatically adjust to the programmed favorite setting.
This is operable when connecting duct type indoor units equipped with the external static pressure adjustment function.
Static pressure adjustment It will adjust the airflow accordingly based on the connected duct static pressure.
Convenient
Remote control You can select wired remote controls, wireless remote controls or central remote controls.
Select the language Set the language to be displayed on the remote control.
Air filter Removes airborne dust particles through the air filter to ensure a steady supply of clean air.
Filter sign Announces the due time for cleaning of the air filter.
Outside air intake Outside fresh air can be taken inside.
In the case that the air conditioner malfunctions, an internal microcomputer automatically runs a self-diagnosis.
Self-diagnosis
Others
(Inspection and repair should be performed by authorized dealers.)

It allows for a flexible piping layout for condensate allowing a high degree of freedom depending on the
Drain up installation location
76
FDT FDTC FDTW FDTS FDTQ FDU FDUM FDUT FDUH FDK FDE FDFW FDFL FDFU FDU-F
(71only)
Option Option Option Option Option Option Option Option Option Option Option Option Option Option Option
procure procure
locally Option Option Option locally
Option
Option
*1 *2
1 : Except 224 • 280 2 : Except 1800 • 2400
* *
77
R410A
Ceiling Cassette -4way- Remote control (option)

Wired
FDT
RC-EX3 RC-E5 RCH-E3
Wireless
Model No.
FDT28KXZE1
FDT36KXZE1
FDT45KXZE1
FDT56KXZE1 RCN-T-5AW-E2
FDT71KXZE1
FDT90KXZE1
FDT112KXZE1
FDT140KXZE1
FDT160KXZE1
Draft Prevention Panel (Option)
Draft Prevention Panel (Option)
Draft Prevention Panel prevents cold / hot draft being blown Advanced airflow control technology cultivated through
directly on the user. aircraft development.
It is possible to set Draft Prevention Panel for each air outlet.
Draft prevention
Draft prevention panel working
panel not working Cool
Dry
Draft Prevention Panel working
User can position Draft Prevention Panel panels by using the

remote controller only (RC-EX3, RCN-T-5AW-E2).
Draft Prevention Panel placed at off position
Motion Sensor (Option) Improve the aerodynamic performance of the unit
Motion sensor is equipped in New designed component can have better

the panel corner and detects aerodynamic perfromance and achieve lower noise.
the presence/absence and Motion Sensor
activity of humans in a room to New design turbo fan Fan guard

improve the comfort and energy (standard equipment)
saving performance of the unit.
Motion Sensor detects

presence/absence and
activity amounts of
humans in a room to
improve comfort and
energy saving
performance.
LB-T-5W-E
78
Panel select pattern (Option)
8 patterns of panel are avilable. Installation position of Wireless kit and Motion sensor kit
Standard Panel Corner panel with motion sensor

Motion
T-PSA-5AW-E LB-T-5W-E sensor

T-PSAE-5AW-E Corner panel with wireless receiver
RCN-T-5AW-E2
Wireless
receiver
① Standard Panel only
①+③ Standard Panel with corner panel with motion sensor *Wireless receiver and Motion sensor can be installed to the position as shown
①+④ Standard Panel with corner panel with wireless receiver
①+⑤ Standard Panel with corner panel with motion sensor & corner panel with wireless receiver
② Draft Prevention Panel only
②+③ Draft Prevention Panel with corner panel with motion sensor
②+④ Draft Prevention Panel with corner panel with wireless receiver
②+⑤ Draft Prevention Panel with corner panel with motion sensor & corner panel with wireless receiver
Individual flap control system
According to room conditions, four directions

of air flow can be controlled individually by
utilizing the flap control system.
Individual flap control is available even after
installation.
Flap can swing within an

Selected
upper and lower flap range upper position
position within can be
selected with a wired
Max swing
remote control. range
※The wireless remote control is not For person who is far For both persons who are Can cool both the kitchen
Selected from the indoor unit feeling hot or cold and the guests
applicable to the Individual flap lower position
control system.
850mm Drain Pump
Drain can be discharged upwards by 850mm from the

ceiling surface. It allows a piping layout with a high
degree of freedom. Depending on the installation location
and 185mm flexible hose as a standard equipment 700 Up to
supports easy workability.
mm 850 mm
Flexible hose
Easy check of drain pan
Easy check of drain pan

condition is available by
removing corner lid only. Rubber
stopper
drain cap cover drain cap drain pump port
Remove corner lid. Remove drain cap cover and check the condition. Clean up the area around
It is necessary to clean-up, firstly remove the rubber the drain pump port.
stopper to drain water out and secondly remove the
drain cap.
79
R410A
Specifications
Item Model FDT28KXZE1 FDT36KXZE1 FDT45KXZE1 FDT56KXZE1 FDT71KXZE1 FDT90KXZE1 FDT112KXZE1 FDT140KXZE1 FDT160KXZE1
Nominal cooling capacity kW 2.8 3.6 4.5 5.6 7.1 9.0 11.2 14.0 16.0
Nominal heating capacity kW 3.2 4.0 5.0 6.3 8.0 10.0 12.5 16.0 18.0
Power Cooling 0.02-0.02 0.03-0.03 0.04-0.04 0.08-0.08 0.13-0.13 0.14-0.14
consumption Heating kW 0.02-0.02 0.03-0.03 0.04-0.04 0.08-0.08 0.13-0.13 0.14-0.14
Sound power level dB(A) 49 50 55 62 65 66
Sound pressure level dB(A) Hi:33 Me:30 Lo:28 Hi:33 Me:31 Lo:29 Hi:35 Me:32 Lo:28 Hi:38 Me:36 Lo:31 Hi:39 Me:37 Lo:31 Hi:42 Me:39 Lo:32 Hi:42 Me:39 Lo:33
Exterior dimensions
mm Unit:236x840x840 Panel:35x950x950 Unit:298x840x840 Panel:35x950x950
HxWxD
Net weight kg Unit:20 Standard Panel:5 Unit:21.5 Standard Panel:5 Unit:25 Standard Panel:5
Air flow m3/min Hi:14 Me:12 Lo:10 Hi:15 Me:13 Lo:10 Hi:16 Me:13 Lo:11 Hi:17 Me:14 Lo:12 Hi:25 Me:22 Lo:15 Hi:26 Me:23 Lo:17 Hi:28 Me:25 Lo:18 Hi:29 Me:26 Lo:19
Outside air intake Possible
Panel T-PSA-5AW-E, T-PSAE-5AW-E
Air filter, Q’ty Pocket Plastic net x1 (Washable)
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-T-5AW-E2
Installation data Liquid line:ø6.35(1/4") Liquid line:ø6.35(1/4") Liquid line:ø9.52(3/8")
Refrigerant piping size mm(in) Gas line:ø9.52(3/8") Gas line:ø12.7(1/2") Gas line:ø15.88(5/8")
Powerful-Hi can be selected. Sound pressure level: FDT28/36 37dB(A), FDT45/56 38dB(A), FDT71 47dB(A), FDT90/112/140/160 49dB(A). Air flow: FDT28 15m 3/min, FDT36 16m3/min, FDT45 17m3/min, FDT56 20m3/min, FDT71
28m3/min, FDT90 37m3/min,, FDT112/140/160 38m3/min.
80
Dimensions
FDT28KXZE1
36KXZE1
45KXZE1
56KXZE1
71KXZE1
FDT90KXZE1
112KXZE1
140KXZE1
160KXZE1
81
R410A
Ceiling Cassette -4way Compact (600x600mm)-

FDTC Fits into standard
600 x 600 ceiling
Model No.
FDTC15KXE6F Remote control (option)
FDTC22KXE6F Wired Wireless
FDTC28KXE6F
FDTC36KXE6F
FDTC45KXE6F
FDTC56KXE6F RC-EX3 RC-E5 RCH-E3 RCN-TC-24W-E2
Individual flap control system
According to room temperature conditions, four directions of air flow Selection of flap position is
can be controlled by individual flap as preferred. possible. Individual flaps can be Upper
position
Individual flap control is available even after installation. set at different angles.
Movable
range
*The wireless remote control is not applicable to
the Individual flap control system.
Lower
position
Taking OA (Outside Air) into inside Quiet operation (Sound pressure level in the Lo mode.)
OA Spacer TC-OAS-E (option) The industry's lowest sound pressure level:25dB(A) of FDTC15KXE6F was
Joint Duct TC-OAD-E (option) achieved by Optimizing fan speed and distributor size.
Utilizing OA spacer which comes as optional equipment, outside air
can be taken inside. dB(A)
40 dB(A)40 dB(A)40
39
dB
Using 1 joint duct: 35 35 35 36

34
dB
OA up to 1.3m3/min. Indoor Unit FDTC 2dB
Down
dB
34
34
dB
3~8dB
Down
34
Using 2 joint ducts: 32
32
dB 32 dB dB
OA from 1.3 to 2.6m3/min.
30 30
dB dB
30
31
30 dB
dB
25 25 25
300mm 25 25
dB dB
OA Spacer 20 20 20
Current Current Previous Current Current Previous Current Current

Ceiling OA OA (Cooling) (Heating) (Cooling/Heating) (Cooling) (Heating) (Cooling/Heating) (Cooling) (Heating)
surface Panel Joint Duct FDTC15 FDTC22/28 FDTC36/45/56
Specifications
Item Model FDTC15KXE6F FDTC22KXE6F FDTC28KXE6F FDTC36KXE6F FDTC45KXE6F FDTC56KXE6F
Nominal cooling capacity kW 1.5 2.2 2.8 3.6 4.5 5.6
Nominal heating capacity kW 1.7 2.5 3.2 4.0 5.0 6.3
Power Cooling 0.02-0.02 0.03-0.03 0.05-0.05
consumption Heating kW 0.02-0.02 0.03-0.03 0.05-0.05
Sound power level dB(A) 56 58 60
Sound pressure Cooling Hi:32 Me:28 Lo:25 Hi:35 Me:33 Lo:30 Hi:38 Me:36 Lo:31 Hi:40 Me:37 Lo:31 Hi:45 Me:39 Lo:31
dB(A)
level Heating Hi:32 Me:28 Lo:25 Hi:35 Me:33 Lo:32 Hi:38 Me:36 Lo:34 Hi:40 Me:37 Lo:34 Hi:45 Me:39 Lo:34
Exterior dimensions
mm Unit:248x570x570 Panel:35x700x700
HxWxD
Net weight kg Unit:14 Panel:3.5 Unit:15 Panel:3.5
Cooling Hi:7 Me:5.5 Lo:4.5 Hi:9.5 Me:8.5 Lo:7 Hi:10 Me:9 Lo:7 Hi:11 Me:9 Lo:7 Hi:13 Me:10 Lo:7
Air flow m3/min
Heating Hi:7 Me:5.5 Lo:4.5 Hi:9.5 Me:8.5 Lo:8 Hi:10 Me:9 Lo:8 Hi:11 Me:9 Lo:8 Hi:13 Me:10 Lo:8
Outside air intake Possible with OA Spacer TC-OAS-E & Joint Duct TC-OAD-E
Panel TC-PSA-25W-E
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-TC-24W-E2
Installation data Liquid line:ø6.35(1/4") Liquid line:ø6.35(1/4")
Refrigerant piping size mm(in) Gas line:ø9.52(3/8") Gas line:ø12.7(1/2")
Powerful-Hi can be selected. Sound pressure level: FDTC15 34dB(A), FDTC22/28 44dB(A), FDTC36 46dB(A), FDTC45 48dB(A), FDTC56 49dB(A). Air flow: FDTC15 8m 3/min, FDTC22/28 12m3/min, FDTC36 13m3/min, FDTC45
15m3/min, FDTC56 16m3/min.
82
Dimensions
FDTC15KXE6F,
22KXE6F,
28KXE6F
VP25(O.D.32)
Ultra slim design at just 248mm above the ceiling Condensate drain pump included as standard
83
R410A

Wired
FDTW FDTW28~71
RC-EX3 RC-E5 RCH-E3

Model No.
Wireless
FDTW28KXE6F FDTW90KXE6F
FDTW71KXE6F
RCN-TW-E2
FDTW90~140
Individual flap control system Installation workability
According to room temperature conditions, four directions air

flow can be controlled individually by flap control system. Drainage spout
Due to optimization of outlet design of air flow our new advanced
technology, sufficient air flow is secured and long reach of air Drainage flow test can be
flow is achieved. done easily by use of this
3 drainage spout.
Transparent access hole to drain pan

Dirt condition of the A cross is visible Invisible
bottom of a drain
pan can be checked
4 Cleaning Cleaning
1 2 through this not required required
transparent access
hole without
removing drain pan. A circumscribes Invisible
The flap can swing within the Selected
circle is visible
range of upper and lower flap upper position
position selected with wired 750mm Drain Pump
remote control.
Max swing Drain can be discharged upward
range
by 750mm from the ceiling Flexible hose
Selected surface close to the indoor unit. 750mm
lower position It allows a piping layout with a
high degree of freedom
*The wireless remote control is not applicable to the individual flap control system. depending on the installation
location.
Specifications
Item Model FDTW28KXE6F FDTW45KXE6F FDTW56KXE6F FDTW71KXE6F FDTW90KXE6F FDTW112KXE6F FDTW140KXE6F
Nominal cooling capacity kW 2.8 4.5 5.6 7.1 9.0 11.2 14.0
Nominal heating capacity kW 3.2 5.0 6.3 8.0 10.0 12.5 16.0
Power Cooling 0.09-0.09 0.10-0.10 0.14-0.14 0.19-0.19
consumption Heating kW 0.09-0.09 0.10-0.10 0.14-0.14 0.19-0.19
Sound power level dB(A) 58 65
Sound pressure level dB(A) Hi:38 Me:34 Lo:31 Hi:45 Me:41 Lo:37
Exterior dimensions
mm Unit:325x820x620 Panel:20x1120x680 Unit:325x1535x620 Panel:20x1835x680
HxWxD
Net weight kg Unit:20 Panel:8.5 Unit:21 Panel:8.5 Unit:23 Panel:8.5 Unit:35 Panel:13
Air flow m3/min Hi:12 Me:10 Lo:9 Hi:27 Me:23 Lo:20
Panel TW-PSA-26W-E TW-PSA-46W-E
Air filter, Q’ty Pocket Plastic net x2 (Washable) Pocket Plastic net x3 (Washable)
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-TW-E2
Powerful-Hi can be selected. Sound pressure level: FDTW28/45/56/71 42dB(A), FDTW90/112/140 48dB(A). Air flow: FDTW28/45/56/71 14.5m3/min, FDTW90/112/140 31m3/min.
84
Dimensions
FDTW28KXE6F, 45KXE6F, 56KXE6F, 71KXE6F
VP25 (O.D. 32)

102
650
102
FDTW90KXE6F, 112KXE6F, 140KXE6F
VP25 (O.D. 32)

102
650
102
85
R410A
FDTS
Wired Wireless
Model No.
FDTS45KXE6F RC-EX3 RC-E5
FDTS71KXE6F
RCH-E3
RCN-TS-E2
Individual flap control system Compact design
Two directions of air flow can be controlled individually by Indoor unit size (W:1,150 x
flap control system. D:565) brings easy installation for
1,200 x 600 ceiling and Panel size 220mm
(1,250 x 650) is suitable for 1,200
x 600 ceiling. Height is the
industry's lowest height level
220mm and weight is 27/28kg
only.
600mm Drain Pump
Drain can be discharged

upward by 600mm from Flexible hose
the ceiling surface close 600mm
to the indoor unit.
It allows a piping layout
with a high degree of
The flap can swing within the Selected freedom depending on the
range of upper and lower flap upper position
installation location.
position selected with wired
remote control.
Max swing Wireless remote control
range
For wireless remote
Selected
lower position
control simply attach
an additional panel
*The wireless remote control is not applicable to the individual flap control with infrared receiver
system. on the right side of
the main decorative
panel.
RCN-TS-E2
Specifications
Item Model FDTS45KXE6F FDTS71KXE6F
Nominal cooling capacity kW 4.5 7.1
Nominal heating capacity kW 5.0 8.0
Power Cooling 0.04-0.04 0.09-0.09
consumption Heating kW 0.04-0.04 0.09-0.09
Sound pressure level dB(A) Hi:40 Me:38 Lo:35 Hi:46 Me:41 Lo:36
Exterior dimensions
mm Unit:220x1150x565 Panel:35x1250x650
HxWxD
Net weight kg Unit:27 Panel:5 Unit:28 Panel:5
Air flow m3/min Hi:12 Me:11 Lo:9.5 Hi:15 Me:12 Lo:9.5
Panel TS-PSA-3AW-E
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-TS-E2
Powerful-Hi can be selected. Sound pressure level: FDTS45 42dB(A), FDTS71 49dB(A). Air flow: FDTS45 13m3/min, FDTS71 17m3/min.
86
Dimensions
87
R410A
Ceiling Cassette -1way Compact-

FDTQ Remote control (option)
Model No. Fits into standard Wired
FDTQ22KXE6F 600 x 600 ceiling
FDTQ28KXE6F
FDTQ36KXE6F
RC-EX3 RC-E5 RCH-E3
Wireless
RCN-KIT4-E2
Compact design
• Comfortable effective cooling for small rooms,

with low fan speed air flow at just 5.4m3/min.
Fresh air
Holes for opening
tapping screws for ducting
(Knock out)
Max.Drain up
250
295~325
285
63
600 or less
35
210
Optional wide panel shown for solid ceiling Condensate drain pump Ultra slim design at just 250mm above the ceiling
included as standard
Specifications
Item Model FDTQ22KXE6F FDTQ28KXE6F FDTQ36KXE6F
Panel Name Direct blow panel Duct panel Direct blow panel Duct panel Direct blow panel Duct panel
Panel mode (Option) TQ-PSA-15W-E TQ-PSB-15W-E QR-PNA-14W-ER QR-PNB-14W-ER TQ-PSA-15W-E TQ-PSB-15W-E QR-PNA-14W-ER QR-PNB-14W-ER TQ-PSA-15W-E TQ-PSB-15W-E QR-PNA-14W-ER QR-PNB-14W-ER
Nominal cooling capacity kW 2.2 2.8 3.6
Nominal heating capacity kW 2.5 3.2 4.0
Power Cooling 0.05-0.07 0.05-0.07 0.05-0.07
Sound pressure level dB(A) Hi:41 Me:38 Lo:33 Hi:41 Me:38 Lo:33 Hi:41 Me:38 Lo:33 Hi:41 Me:38 Lo:33 Hi:41 Me:38 Lo:33 Hi:41 Me:38 Lo:33
Exterior dimensions Unit 250x570x570 250x570x570 250x570x570
HxWxD mm
Panel 35x625x650 35x780x650 35x625x650 35x780x650 35x625x650 35x780x650 35x625x650 35x780x650 35x625x650 35x780x650 35x625x650 35x780x650
Net weight kg Unit:23 Panel:2.5 Unit:23 Panel:3 Unit:23 Panel:2.5 Unit:23 Panel:3 Unit:23 Panel:2.5 Unit:23 Panel:3 Unit:23 Panel:2.5 Unit:23 Panel:3 Unit:23 Panel:2.5 Unit:23 Panel:3 Unit:23 Panel:2.5 Unit:23 Panel:3
Air flow m3/min Hi:7 Me:6 Lo:5 Hi:7 Me:6 Lo:5 Hi:7 Me:6 Lo:5 Hi:7 Me:6 Lo:5 Hi:7 Me:6 Lo:5 Hi:7 Me:6 Lo:5
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-KIT4-E2
Powerful-Hi can be selected. Sound pressure level: FDTQ22/38/36 45dB(A). Air flow: FDTQ22/38/36 8m3/min.
88
Dimensions
Direct blow panel (TQ-PSA-15W-E) Direct blow panel (TQ-PSB-15W-E)
Duct panel (QR-PNA-14W-ER) Duct panel (QR-PNB-14W-ER)
* In case of Direct blow panel
Dimension Table Unit:mm Dimension Table Unit:mm
model a b c d model a b c
TQ-PSA-15W-E 625 514 650 580 QR-PNA-14W-ER 625 650 580
TQ-PSB-15W-E 780 514 650 580 QR-PNB-14W-ER 780 650 580
89
R410A
Duct Connected -High Static Pressure- Remote control (option)
FDU
Wired
Model No.
FDU45KXE6F
RC-EX3 RC-E5 RCH-E3
FDU56KXE6F
FDU71KXE6F Wireless
FDU90KXE6F
FDU112KXE6F
FDU140KXE6F
FDU160KXE6F RCN-KIT4-E2
External Static Pressure(E.S.P) control Thin design
You can set External Static Pressure

(E.S.P.) by method of manual setting 280mm
on remote control. Indoor unit will
control fan-speed to keep rated air Previous Current
flow volume at each fan speed setting. FDU71KXE6F 297 280 17mm less!!
You can set required E.S.P. by wired FDU112/140KXE6F 350 280 70mm less!!
remote control that calculated with the E.S.P. button RC-E5
set air flow rate and pressure loss of External Static Pressure (E.S.P.) Reduction of sound pressure level
the duct connected. can be set by E.S.P. button. (FDU71KXE6F, in the Lo mode)
Previous
Duct FDU Duct Longer Duct

Current 12dB less!!
Ceiling
0 5 10 15 20 25 30 35 40 dB(A)
Keep the same Previous Current Lo mode
air flow volume
FDU90KXE6F 37 25 12dB(A) less!!
case1 case2 FDU112KXE6F 38 30 8dB(A) less!!
FDU140KXE6F 39 29 10dB(A) less!!
Setting No. No.8 No.9 No.10 No.11 No.12 No.13 No.14 No.15
Transparent inspection window
E.S.P. 80Pa 90Pa 100Pa 110Pa 120Pa 130Pa 140Pa 150Pa
Dirt condition of the bottom of a drain pan can be checked through
*Range of 80~150 Pa is set at ex-factory default. this transparent inspection window without removing drain pan.
Range of 10~200 Pa is available by setting SW8-4 switch on at site. (Please refer to P84)
<Expansion of external static pressure range>

Round duct adapter
Previous Current
10~130Pa 10~200Pa In case of requirements of Company AIRZONE
round duct adapter, please URL http://www.airzone.es
refer to P93.
Specifications
Item Model FDU45KXE6F FDU56KXE6F FDU71KXE6F FDU90KXE6F FDU112KXE6F FDU140KXE6F FDU160KXE6F
Power Cooling 0.10-0.10 0.24-0.25 0.31-0.32 0.35-0.36 0.42-0.43
consumption Heating kW 0.10-0.10 0.24-0.25 0.31-0.32 0.35-0.36 0.42-0.43
Sound pressure level dB(A) Hi:32 Me:29 Lo:26 Hi:33 Me:29 Lo:25 Hi:38 Me:36 Lo:30 Hi:40 Me:34 Lo:29 Hi:40 Me:35 Lo:30
Exterior dimensions
mm 280x750x635 280x950x635 280x1370x740
HxWxD
Air flow m3/min Hi:10 Me:9 Lo:8 Hi:19 Me:15 Lo:10 Hi:28 Me:25 Lo:19 Hi:32 Me:26 Lo:20 Hi:35 Me:28 Lo:22
Maximum external static pressure Pa 200
Air filter Procure locally
1. The data are measured under the following conditions(ISO-T1). Cooling: Indoor temp. of 27ºCDB, 19ºCWB, and outdoor temp. of 35ºCDB. Heating: Indoor temp. of 20ºCDB, and outdoor temp. of 7ºCDB, 6ºCWB. External static
pressure of indoor unit is 60Pa.
Powerful-Hi can be selected. Sound pressure level: FDU45/56 37dB(A), FDU71/90 38dB(A), FDU112 44dB(A), FDU140 45dB(A),FDU160 47dB(A). Air flow: FDU45/56 13m 3/min, FDU71/90 24m3/min, FDU112 36m3/min, FDU140
39m3/min, FDU160 48m3/min.
90
Dimensions
FDU45KXE6F, 56KXE6F
FDU71KXE6F, 90KXE6F
FDU112KXE6F, 140KXE6F, 160KXE6F
91
R410A
Duct Connected -High Static Pressure- Remote control (option)
FDU
Wired
Model No.
FDU224KXZE1 RC-EX3 RC-E5 RCH-E3
FDU280KXZE1
Wireless
RCN-KIT4-E2
External Static Pressure(E.S.P) control Quiet operation:45dB(A)
You can set External Static Pressure (E.S.P.) by Thanks to use of DC fan motor, fan steps increase from
method of manual setting on remote control. two to four and quiet operation is achieved.
Indoor unit will control fan-speed to keep rated air (Sound pressure level 45dB(A) in the Lo mode).
flow volume at each fan speed setting. You can set
required E.S.P. by wired remote
control that calculated with the RC-E5
set air flow rate and pressure E.S.P. button
loss of the duct connected. External Static Pressure (E.S.P.) can Improvement of the serviceability
be set by E.S.P. button.
Fan unit (impeller and motor) can
Pipe
Duct Duct Longer Duct
be pulled out from the right side
FDU
of the unit. Maintenance can be Fan unit
Ceiling
available from the right side or
the bottom side.
Keep the same
air flow volume
(Common for FDUM22~160KXE6F
& FDU45~160KXE6F)
case1 case2
Setting No. No.8 No.9 No.10 No.11 No.12 No.13 No.14 No.15
E.S.P. 80Pa 90Pa 100Pa 110Pa 120Pa 130Pa 140Pa 150Pa
*Range of 80~150 Pa is set at ex-factory default.

Range of 10~200 Pa is available by setting SW8-4 switch on at site.
Specifications
Item Model FDU224KXZE1 FDU280KXZE1
Nominal cooling capacity kW 22.4 28.0
Nominal heating capacity kW 25.0 31.5
Power Cooling 1.16-1.20 1.16-1.20
Sound pressure level dB(A) Hi:50 Me:47 Lo:45
Exterior dimensions
mm 379x1600x893
HxWxD
Net weight kg 89
Air flow m3/min Hi:72 Me:64 Lo:56
Maximum external static pressure Pa 200
Outside air intake Possible(on return duct)
Air filter Procure locally
Powerful-Hi can be selected. Sound pressure level: FDU224/280 52dB(A). Air flow: FDU224/280 80m3/min.
92
Dimensions
Round duct adapter (Available for FDU 45~160KXE6F, FDUM 22~160KXE6F)
Company : AIRZONE
URL : http://www.airzone.es
All-in-one solution: the whole zoning system in a
plug&play device perfectly adapted to the indoor DX unit Main components
Main Thermostat / Centralized

management controller Inverter ducted unit
BODY INSULATED FRAME ADAPTED TO Motorized
THE DUCTED UNIT plenum
FRESH AIR
AIR INLET
DAMPERS Ø150/Ø200
2 to 8
IP6 BOARD +
COMMUNICATION GATEWAY
WIRING DONE IN FACTORY
Zone Thermostat
93
R410A
Duct Connected -Low/Middle Static Pressure-

FDUM Remote control (option)
Wired
Model No.
FDUM22KXE6F FDUM71KXE6F
FDUM45KXE6F FDUM140KXE6F RC-EX3 RC-E5 RCH-E3
FDUM56KXE6F FDUM160KXE6F Wireless
Filter kit (option)

UM-FL1EF : for 22~56
UM-FL2EF : for 71, 90
UM-FL3EF : for 112, 140, 160 RCN-KIT4-E2
*Filter pressure loss:5pa
Automatic external static pressure (E.S.P.) control Thin design
Duct design was simplified. The height of all FDUM models is only 280mm.
Using DC motor, the most optimum air flow volume can be achieved
by this automatic control. 70mm less
Indoor unit will recognize external static pressure by itself
H 350
automatically and keep rated air flow volume.
E.S.P. button RC-E5 H 280
Duct FDUM Duct Longer Duct External static pressure
(E.S.P.) can be set by
Ceiling E.S.P. button. FDUM112/140KXE6F
Keep the same
air flow volume
19mm less
case1 case2 H 299
Setting No. No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 No.10 H 280
E.S.P. 10Pa 20Pa 30Pa 40Pa 50Pa 60Pa 70Pa 80Pa 90Pa 100Pa
FDUM22~90KXE6F
Improvement of the serviceability
Fan unit (impeller and motor) can be pulled out Pipe Transparent inspection window
from the right side or the bottom side of the unit. Unit Fan unit
Maintenance can be available from the right side

Maintenance
hole Dirt condition of the bottom of a drain pan can be checked
or the bottom side. through this transparent inspection window without
Service
space removing drain pan. (Please refer to P84)
(mm)
Specifications
Item Model FDUM22KXE6F FDUM28KXE6F FDUM36KXE6F FDUM45KXE6F FDUM56KXE6F FDUM71KXE6F FDUM90KXE6F FDUM112KXE6F FDUM140KXE6F FDUM160KXE6F
Nominal cooling capacity kW 2.2 2.8 3.6 4.5 5.6 7.1 9.0 11.2 14.0 16.0
Nominal heating capacity kW 2.5 3.2 4.0 5.0 6.3 8.0 10.0 12.5 16.0 18.0
Power Cooling 0.10-0.10 0.20-0.20 0.29-0.29 0.33-0.33 0.45-0.45
consumption Heating kW 0.10-0.10 0.20-0.20 0.29-0.29 0.33-0.33 0.45-0.45
Sound pressure level dB(A) Hi:32 Me:29 Lo:26 Hi:33 Me:29 Lo:25 Hi:38 Me:36 Lo:30 Hi:40 Me:34 Lo:29 Hi:40 Me:35 Lo:30
Exterior dimensions
mm 280 x 750 x 635 280 x 950 x 635 280 x 1370 x 740
HxWxD
Air flow m3/min Hi:10 Me:9 Lo:8 Hi:19 Me:15 Lo:10 Hi:28 Me:25 Lo:19 Hi:32 Me:26 Lo:20 Hi:35 Me:28 Lo:22
Maximum external
Pa 100
static pressure
Air filter Filter kit:UM-FL1EF/UM-FL2EF/UM-FL3EF(option)
pressure of indoor unit is 35Pa(22/28/36/45/56/71/90), 60Pa(112/140/160).
Powerful-Hi can be selected. Sound pressure level: FDUM22/28/36/45/56 37dB(A), FDUM71/90 38dB(A), FDUM112 44dB(A), FDUM140 45dB(A), FDUM160 47dB(A). Air flow: FDUM22/28/36/45/56 13m3/min, FDUM71/90
24m3/min, FDUM112 36m3/min, FDUM140 39m3/min, FDUM160 48m3/min.
94
Dimensions
FDUM22KXE6F, 28KXE6F, 36KXE6F, 45KXE6F, 56KXE6F
FDUM71KXE6F, 90KXE6F
FDUM112KXE6F, 140KXE6F, 160KXE6F
Round duct adapter

In case of requirements of Company AIRZONE
round duct adapter, please URL http://www.airzone.es
refer to P93.
95
R410A
Duct Connected (thin) -Low Static Pressure-

FDUT Remote control (option)
Wired
Model No.
FDUT15KXE6F-E
FDUT22KXE6F-E
RC-EX3 RC-E5 RCH-E3
FDUT28KXE6F-E
Wireless
FDUT36KXE6F-E
FDUT45KXE6F-E
FDUT56KXE6F-E
FDUT71KXE6F-E RCN-KIT4-E2
Compact design Lower noise
<FDUT15~56KXE6F-E> <FDUT28KXE6F-E> Previous Previous

Height: 220 200mm Current Current
1dB(A)
20mm less!! 1m
Unit [dB(A)] Down
2dB(A)
[dB(A)] 5dB(A)
Down
1m 30 40
Down 4dB(A)
Down
2m 1m 30
1.5m
20
29 28 37
20
Depth: 520 500mm 24 32 30
10 22
10 26
Measured based on JIS B 8616
Larger outlet for connecting duct 0
0
L700 x 70mm L860 x 99 (45/56) Hi Lo Hi Lo
Fan speed Fan speed

Previous Model Current Model
Serviceability Duct kit and filter options
Item Contents for FDUT15/22/28/36KXE6F-E for FDUT45/56KXE6F-E for FDUT71KXE6F-E

Access to control Outlet duct plate 1 UT-SAT1EF UT-SAT2EF UT-SAT3EF
Filter set 2+3 UT-FL1EF UT-FL2EF UT-FL3EF
Access to control Access to fan motor Access to fan motor Filter pressure loss : 5 Pa
Previous Model Current Model 2 Filter fixing plate
3 Filter
1 Outlet duct plate
Specifications
Item Model FDUT15KXE6F-E FDUT22KXE6F-E FDUT28KXE6F-E FDUT36KXE6F-E FDUT45KXE6F-E FDUT56KXE6F-E FDUT71KXE6F-E
Power Cooling 0.06-0.06 0.07-0.07 0.08-0.08 0.08-0.08
Sound power level dB(A) 52 57 58 59
Sound pressure level 1 dB(A) Hi:28 Me:26 Lo:22 Hi:28 Me:26 Lo:22 Hi:33 Me:30 Lo:26 Hi:34 Me:32 Lo:28 Hi:35 Me:33 Lo:30 Hi:35 Me:31 Lo:28
Sound pressure level 2 dB(A) Hi:32 Me:29 Lo:25 Hi:32 Me:29 Lo:26 Hi:37 Me:34 Lo:28 Hi:36 Me:33 Lo:27 Hi:38 Me:33 Lo:29 Hi:41 Me:37 Lo:32
Exterior dimensions
mm 200x750x500 200x950x500 220x1150x565
HxWxD
Net weight kg 21 22 25 31
Air flow (Standard) m3/min Hi:6 Me:5 Lo:4 Hi:7.5 Me:6 Lo:5 Hi:8.5 Me:7 Lo:5.5 Hi:11.5 Me:9 Lo:7 Hi:12.5 Me:9 Lo:7.2 Hi:16 Me:13 Lo:9.5
External Static pressure Pa Standard:10, Max:35 Standard:10, Max:50
Outside air intake Possible from return duct
Air filter Filter set:UT-FL1EF/UT-FL2EF/UT-FL3EF(option)
2. The data of nominal cooling and heating capacity and sound pressure level are measured with 10Pa of external static pressure.
3. The sound level indicates the value of rear-intake type with duct in anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
4. Sound pressure levels are values when 2m supply duct and 1m return duct are connected.
1 : Mike position is 1.5m below unit, 2 : Mike position is 1m in front and 1m below the air supply duct.
96
Dimensions
FDUT15KXE6F-E, 22KXE6F-E, 28KXE6F-E, 36KXE6F-E
15,22,28
FDUT45KXE6F-E, 56KXE6F-E
FDUT71KXE6F-E
97
R410A
Duct Connected (Compact & Flexible) Remote control (option)

Wired
FDUH
RC-EX3 RC-E5 RCH-E3
Model No.
Wireless
FDUH22KXE6F
FDUH28KXE6F Drain up kit (option)
FDUH36KXE6F (600mm)
UH-DU-E
RCN-KIT4-E2
Filter kit (option)

UH-FL1E
*Filter pressure loss:5pa
Compact and thin size, light weight Quiet operation

Our leading high technology has realized the 570mm The lowest sound level in the industry can ensure
best solution for air conditioning in hotels with comfortable stay and rest in hotels.
compact and thin size units and high energy 257
efficiency. In addition, weight is only 20kg. mm
530m
m
Installation Flexibility
Control box and drain piping can be installed on both side of the unit and air intake Wired remote control
to the unit is available from bottom or back side. Our highest technology can satisfy
diverse installation requirements.
Control box
Simple remote control
Considering specialized
usage in hotel rooms,
control buttons are limited
only to minimum required
functions such as ON/OFF,
mode, temperature setting
RCH-E3 and fan speed. It is really
(option) simple and easy to use.
Drain piping
Specifications
Item Model FDUH22KXE6F FDUH28KXE6F FDUH36KXE6F
Power Cooling 0.05-0.07
consumption Heating kW 0.05-0.07
Sound pressure level dB(A) Hi: 33 Me: 30 Lo: 27
Net weight kg 22
Air flow m3/min Hi: 7 Me: 6.5 Lo: 6
External static pressure Pa 30
Outside air intake Possible from return duct
Air filter Filter kit:UH-FL1E(option)
mm(in)
Refrigerant piping size Gas line:ø9.52(3/8") Gas line:ø12.7(1/2")
Powerful-Hi can be selected. Sound pressure level: FDUH22/28/36 39dB(A). Air flow: FDUH22/28/36 8.5m3/min.
98
Dimensions
53
30.8
83.3
32.5
Symbol Content
Model FDUH22KXE6F,28KXE6F FDUH36KXE6F
A Gas piping ø9.52 (3/8") (Flare) ø12.7 (1/2") (Flare)
(Duct dimension)
B Liquid piping ø6.35 (1/4") (Flare)
100
145
C1,C2 Drain piping VP20(I.D.20, O.D.26) Note (2)
D Hole for wiring ø30
32.5
12-ø4 E Suspension bolts (M10)
Holes for 32 150 150 150 32 F Inspection hole (635X890) Note (3)
tapping screws Supply air duct
27.6 494 27.6
(Duct dimension)
Drain hose piece

(Standard Accessory) 575.2 (Suspension bolts pitch)
(Installed on site) Space for installation and service
145.6 Note(4)
273 255.8
30.8
30.8 F
outlet
Air
66.4
C1
40
95.3
21
66
66
156.8
610
(Suspension bolts pitch)
A 62.1 C2
488
530
B Control box
Note(4) 890
600 100
Unit:mm
21
(D)
Air
68
inlet
12-ø4
549.2 E
Holes for Notes
30
tapping screws ( 1 ) The model name label is attached on the fan case
inside the air return grille.
( 2 ) Prepare the connecting socket (VP20) on site.
160
200
38.2 Air inlet

188.5
(As for drain piping, it is possible to choose C1 or C2)

148.5
( 3 ) When control box is located on the reverse side, Installation

space should be modified to new location.
30
37.6
28.3
32 150 150 150 32 ( 4 ) Control box and Drain hose piece are able to be relocated
D 27.5 494.2 27.5 on the reverse side.
574
Bottom plate
(Able to be located on the back side)
View G
In case of Bottom air intake Simple remote control

50.5 150 150 150 50.5
12-ø4
28.5
30
Holes for
tapping screws
120
18.2 537.6
198.2
160
Air inlet
70 15
30
View G
(After bottom plate is replaced to back side)
99
R410A
Wall Mounted Remote control (option)
FDK Model No. NEW Wired
FDK15KXZE1
FDK22KXZE1
RC-EX3 RC-E5 RCH-E3
FDK28KXZE1
FDK15~56
FDK36KXZE1
FDK45KXZE1 Wireless
FDK56KXZE1
FDK71KXZE1
FDK90KXZE1
RCN-K-E2: RCN-K71-E2:
FDK15~56 FDK71,90
FDK71,90
Elegant Timeless Design Jet Technology
The new FDK series air-conditioners have been stylishly designed FDK models adopt the air flow
with rounded contours that fit beautifully into any of Europe’s diverse design that's proven to
interior settings. The design was created by the Italian industrial minimise resistance in a CFD
design studio Tensa srl, based in Milan, to respond to a broad analysis to achieve uniform air
spectrum of local user needs. (15~56KXZE1) conditioning to the furthest
corners of the room.
Fast Slow
Colors in the figure show the air speed.
Flap control system
Selection of flap position is Lateral Swing flap swings from right to left
possible. A flap can be set at Upper
position automatically
different angles. Up/Down Flap swing
Movable
range
+ Up
*The wireless remote control is not applicable to the

flap control system. Lateral swing
Lower
position
Left Right
Specifications Down
Item Model FDK15KXZE1 FDK22KXZE1 FDK28KXZE1 FDK36KXZE1 FDK45KXZE1 FDK56KXZE1 FDK71KXZE1 FDK90KXZE1
Nominal cooling capacity kW 1.5 2.2 2.8 3.6 4.5 5.6 7.1 9.0
Nominal heating capacity kW 1.7 2.5 3.2 4.0 5.0 6.3 8.0 10.0
Power Cooling 0.02-0.02 0.03-0.03 0.04-0.04 0.05-0.05
Sound power level dB(A) 54 55 58 Cooling:58 Heating:61 59 61
Sound pressure Cooling Hi:34 Me:31 Lo:28 Hi:36 Me:32 Lo:28 Hi:38 Me:33 Lo:28 Hi:41 Me:36 Lo:33 Hi:41 Me:36 Lo:33 Hi:40 Me:37 Lo:35 Hi:42 Me:39 Lo:35
dB(A)
level Heating Hi:34 Me:31 Lo:28 Hi:36 Me:32 Lo:28 Hi:38 Me:33 Lo:28 Hi:41 Me:36 Lo:33 Hi:42 Me:37 Lo:33 Hi:40 Me:37 Lo:35 Hi:42 Me:39 Lo:35
Exterior dimensions
mm 290 x 870 x 230 339 x 1197 x 262
HxWxD
Net weight kg 11.5 11 11.5 17
m3/min Hi:5 Me:4.5 Lo:3.6 Cooling:Hi:11 Me:9 Lo:8

Air flow Hi:8 Me:6 Lo:5 Hi:10 Me:8 Lo:7 Hi:11 Me:9 Lo:8 Heating:Hi:12 Me:10 Lo:8 Hi:19 Me:16 Lo:14 Hi:21 Me:19 Lo:16
Outside air intake Not possible
Air filter, Q’ty Polypropylene net x2 (Washable)
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-K-E2, RCN-K71-E2
Powerful-Hi can be selected. Sound pressure level: FDK15/22/28 38dB(A), FDK36 40dB(A), FDK45 43dB(A), FDK56 43dB(A)(Cooling)&44dB(A)(Heating), FDK71 42dB(A), FDK90 44dB(A).
Air flow: FDK15 5.7m3/min, FDK22/28 8.5m3/min, FDK36 11m3/min, FDK45 12m3/min, FDK56 12m3/min(Cooling)&13m3/min(Heating), FDK71 21m3/min, FDK90 23m3/min.
100
Dimensions
FDK15KXZE1, 22KXZE1, 28KXZE1, 36KXZE1, 45KXZE1, 56KXZE1
Installation board Unit （Service space） 100
100 （Service space）

（Service space）50 142.5 585 142.5
170 530 170
210 450 210
435 435
F 35 60 F 60 35
9
45
45
43
185
190
268
47
47
230 3
13
870
80（Service space）
55 SRK 15, 22, 28 :469 55
D B E A C
SRK 36, 45, 56 :475
528
290
Terminal block 537
Space for installation and service when viewing from the front
60
Outlet for downward piping

13
（Refer to the top view） 45 F

Symbol Content
Gas piping SRK15, 22, 28 9.52（3／8"）（Flare）
A
SRK36, 45, 56 12.7（1／2"）（Flare）
B Liquid piping 6.35（1／4"）（Flare）
C Hole on wall for right rear piping （ 65）
D Hole on wall for left rear piping （ 65）
E Drain hose VP16
F Outlet for piping（on both side）
FDK71KXZE1, 90KXZE1
101
R410A
Ceiling Suspended Remote control (option)

Wired
FDE Model No.

FDE36KXZE1
RC-EX3 RC-E5 RCH-E3
FDE45KXZE1
FDE56KXZE1 Wireless
FDE71KXZE1
FDE112KXZE1
FDE140KXZE1
RCN-E-E2
Flap control system Reduction of weight
Selection of flap Thanks to decreasing the numbers of fan motor from two to one,
position is possible. Upper reduction of weight was achieved.
A flap can be set at position
different angles.
Previous Current
Movable
range FDE71 37 33 4kg less!!
*The wireless remote control is
not applicable to the flap control FDE112 49 43 6kg less!!
Lower
system.
position
FDE140 49 43 6kg less!!
Reduction of sound pressure level (Lo mode)
The industry's lowest sound pressure levels were achieved by decreasing air flow volume, decreasing pressure loss with employment of one
fan motor and optimizing casing and distributor shape.
(Comparison of previous model)
dB(A)
50 5dB 8dB
8dB 8dB 5dB less!! 43dB less!!
10dB 39dB less!! less!! less!!
40 39dB 39dB
36dB less!! 37dB 35dB
34dB
31dB 31dB 32dB
30 26dB
20
FDE36 FDE45 FDE56 FDE71 FDE112 FDE140
Specifications
Item Model FDE36KXZE1 FDE45KXZE1 FDE56KXZE1 FDE71KXZE1 FDE112KXZE1 FDE140KXZE1
Nominal cooling capacity kW 3.6 4.5 5.6 7.1 11.2 14.0
Nominal heating capacity kW 4.0 5.0 6.3 8.0 12.5 16.0
Power Cooling 0.05-0.05 0.07-0.07 0.10-0.10 0.13-0.13
Sound power level dB(A) 60 62 —
Sound pressure level dB(A) Hi:38 Me:31 Lo:26 Hi:38 Me:36 Lo:31 Hi:38 Me:36 Lo:31 Hi:39 Me:37 Lo:32 Hi:42 Me:38 Lo:34 Hi:43 Me:40 Lo:35
Exterior dimensions
mm 210 x 1070 x 690 210 x 1320 x 690 250 x 1620 x 690
HxWxD
Air flow m3/min Hi:10 Me:7 Lo:5.5 Hi:10 Me:9 Lo:7 Hi:15 Me:13 Lo:10 Hi:25 Me:21 Lo:16.5 Hi:26 Me:23 Lo:17
Outside air intake Not possible
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-E-E2
Powerful-Hi can be selected. Sound pressure level: FDE36/45/56 46dB(A), FDE71 47dB(A), FDE112 45dB(A), FDE140 48dB(A). Air flow: FDE36/45/56 13m3/min, FDE71 20m3/min, FDE112 28m3/min, FDE140 32m3/min.
102
Dimensions
All measurements in mm. C1,C2
FDE36KXZE1, 45KXZE1, 56KXZE1 D
10
53
290 (Suspension bolts pitch)
135 410 145 Note) The slope of drain piping inside the
24 1022 (Suspension bolts pitch) 24
68 52 unit must take decline of 10mm.
B
A
5
Symbol Content
40
A Gas piping ø12.7 (1/2") (Flare)
31
215
210
173
108
C 1,2 Drain piping VP20 (I.D.20)
53
27
27
40 990 40 15 60 7 D Hole for suspension bolt (M10 or M8)
109
690
20 100 E Back cutout PE cover
1070 195
C1,C2 F Top cutout Plate cover
Air supply 235 Drain hose piece (Accessory, 0.3m) G Hole for drain piping (for left back) (Knock out)
(Installed on site)
271
Space for installation and service Position of top cutout and back cutout
Hole for
0 175 drain piping
12 19 (for left)
20
F
300 or more
100 or more
G
308
150 or more 5 or more Right side cutout

E
C2 75
B
76 Air return grille A C1 110
Obstacle
Remove the cutout using side cutter or similar tool.
135 Make a space of 4000 or more between the units when installing more than one. Note(1)The model name label is attached on the
fan casing inside the air return grille.
C1,C2
53
10
FDE71KXZE1 290 (Suspension bolts pitch) D

135 410 145
24 1272 (Suspension bolts pitch) 24 Note)The slope of drain piping inside the
68 52
B unit must take decline of 10mm.
A
5
Symbol Content
40

31
215
210

173
108
C 1,2 Drain piping VP20 (I.D.20)

D Hole for suspension bolt (M10 or M8)
53
27
27
40 1240 40 15 60 7
109
690 E Back cutout PE cover

1320 20 100
Top cutout
195
C ,C
1 2
F
G Hole for drain piping(for left back)
Plate cover
(Knock out)
Air supply 235 Drain hose piece (Accessory, 0.3m)
(Installed on site)
271
Hole for
175 drain piping
0
12 19 (for left)
20
F
300 or more
100 or more
G
308

E
C2 75
B
76 Air return grille A C1 110 Obstacle
135
Make a space of 4500 or more between the units when installing more than one. Note(1)The model name label is attached on the
C1,C2
FDE112KXZE1, 140KXZE1
D
53
10
290 (Suspension bolts pitch)
1572 (Suspension bolts pitch) 135 410 145

24 24
68 52 Note) The slope of drain piping inside the
B unit must take decline of 10mm.
Symbol Content
A
5

40
255
250
31
C1,2 Drain piping VP20 (I.D.20)

173
108
D Hole for suspension bolt (M10 or M8)

E Back cutout PE cover
53
27
27
40 1540 40 15 60 7
109
690 F Top cutout Plate cover

1620 20 100 G Hole for drain piping (for left back) (Knock out)
195
C ,C
1 2
Air supply 235 Drain hose piece (Accessory, 0.3m)
(Installed on site)
271
Hole for
175 drain piping
0
12 19 (for left)
20
300 or more
100 or more F
G
308

75
E
C2 76 A C1 110 B Obstacle
Air return grille
135
Make a space of 5000 or more between the units when installing more than one. Note(1)The model name label is attached on the
103
R410A
Auto air outlet selection
Floor Standing -2way-

FDFW
Model No.
FDFW28KXE6F
FDFW45KXE6F
FDFW56KXE6F
Remote control (option)

Wired Wireless
RC-EX3 RC-E5 RCH-E3

RCN-FW-E2
Sophisticated Design Quiet Operation
With classy semi flat front panel in chic white, the new Thanks to optimum balance of air outlet direction and
series fit in various kinds of rooms and create relaxing sufficient air flow volume, the sound level has been
atmosphere. Choice of wall hanging, floor standing or minimized. The level of FDFW28KXE6F in the cooling lo
behind gallery installation is available. mode is 30dB(A) only.
Flap control system Convenient to use operation
Selection of flap Simultaneous lower and upper air outlets or upper outlet
Upper can be selected by air flow direction button. Further
position is possible. position
A flap can be set at control can be arranged by a remote control.
different angles. Movable
range
*The wireless remote control is

not applicable to the flap Lower
control system. position
(In case of use of wireless remote control)
Specifications
Item Model FDFW28KXE6F FDFW45KXE6F FDFW56KXE6F
Power Cooling 0.02-0.02 0.02-0.02 0.03-0.03
Sound pressure level dB(A) Hi:36 Me:34 Lo:30 Hi:38 Me:36 Lo:33 Hi:44 Me:37 Lo:33
Exterior dimensions
mm 600x860x238
HxWxD
Net weight kg 19 20
Air flow (Standard) m3/min Hi:9 Me:8 Lo:7 Hi:11 Me:9 Lo:8
Remote control(option) wired:RC-EX3, RC-E5, RCH-E3 wireless:RCN-FW-E2
104
Dimensions
105
R410A
Floor Standing (with casing) Remote control (option)

Wired Wireless
FDFL
Floor Standing (without casing) RC-EX3 RC-E5 RCH-E3 RCN-KIT4-E2
FDFU
Model No.
FDFL71KXE6F
FDFU28KXE6F
FDFU45KXE6F
FDFU56KXE6F
FDFU71KXE6F
FDFL FDFU (concealed type)
Compact design at 630mm height Wider airflow for optimum comfort
Specifications
Item Model FDFL71KXE6F FDFU28KXE6F FDFU45KXE6F FDFU56KXE6F FDFU71KXE6F
Nominal cooling capacity kW 7.1 2.8 4.5 5.6 7.1
Nominal heating capacity kW 8.0 3.2 5.0 6.3 8.0
Power Cooling 0.09-0.10 0.09-0.10
Sound pressure level dB(A) Hi:43 Me:41 Lo:40 Hi:41 Me:38 Lo:36 Hi:43 Me:41 Lo:40
Exterior dimensions
HxWxD mm 630x1481x225 630x1077x225 630x1362x225
Air flow (Standard) m3/min Hi:18 Me:15 Lo:12 Hi:12 Me:11 Lo:10 Hi:14 Me:12 Lo:10 Hi:18 Me:15 Lo:12
Installation data Liquid line:ø9.52(3/8") Liquid line:ø6.35(1/4") Liquid line:ø6.35(1/4") Liquid line:ø9.52(3/8")
Refrigerant piping size mm(in) Gas line:ø15.88(5/8") Gas line:ø9.52(3/8") Gas line:ø12.7(1/2") Gas line:ø15.88(5/8")
106
Dimensions
FDFL
FDFU
Dimension Table Unit:mm
model a b c d e
FDFU28KXE6F, 45KXE6F, 56KXE6F 786 810 722 750 806
FDFU71KXE6F 1071 1095 1007 1035 1091
107
R410A
Outdoor Air Processing unit

FDU-F
Remote control (option)
Wired
Model No.
FDU650FKXZE1
FDU1100FKXZE1 RC-EX3 RC-E5 RCH-E3
FDU1800FKXZE1
FDU2400FKXZE1 Wireless
RCN-KIT4-E2
Air conditioning and intake of outdoor air are in the same system
Outdoor Air processing unit can

be connected in a KXZ system as KXZ outdoor unit
one of indoor unit series and can
create fresh and comfortable air
supply together from our high indoor unit indoor unit
advanced technology. Outdoor Air
Processing unit office
refresh room,
corridor
air outside rest room
conditioning air supply
Compact design
Compact design at just 280(650,

1100), 379(1800, 2400)mm in
height, high static pressure of
200Pa and the industry's lowest
noise level can meet various kind exhaust air
of installation location for office,
refresh room, restroom and
kitchen of restaurant etc.
outdoor air
supply air
outdoor air
supply air
(1) This unit is the specific unit for processing the outdoor air temperature closer to the room temperature. For conditioning the room temperature a
dedicated air-conditioner is required additionally.
(2) This unit monitors the outdoor air temperature and controls thermostat ON/OFF at the setting temperature by the remote controller, which
indicates the outdoor air temperature for controlling thermostat ON/OFF. When thermostat is turned OFF, the operation is changed to the fan mode
so that unprocessed outdoor air will be blown into the room directly. Therefore place the air outlet port or orient the air outlet direction not to blow
air directly to persons in the room, especially in the small room such as a restroom and/or sanitary hot water supplying room.
(3) It is strictly prohibited to monitor the room temperature by switching to the thermistor at remote controller side and/or the optional remote
thermistor. Otherwise dew formation at air outlet port and/or dew dripping may occur during cooling operation due to the lower outdoor air
temperature. Therefore keep the remote controller of this unit in place closer to the administrator so as not to be touched it freely by the end user.
(4) Dehumidifying operation with this unit is prohibited.
(5) When handing over this unit to the end user, make sure to explain sufficiently about the foregoing cautions, the installation place and usage of
remote control for this unit and the location of the air outlet.
108
Connectivity with Outdoor units
FDU-F series are connectable to 8~60HP outdoor units, not connectable to 4~6HP, KXZ Lite.
Combination with Outdoor units

case Combination
In case OA processing units only The total capacity of FDU-F is 50~100% of outdoor capacity
A are connected with outdoor units. and max quantity of FDU-F is 2 units.
In case both of OA processing units
The total capacity of FDU-F and dedicated air-conditioners is 50~100% of outdoor
B and dedicated air-conditioner capacity and max quantity of FDU-F should be below 30% of outdoor unit capacity.
are connected with outdoor units.
[A] [B] Less than 30%

FDU650FKXZE1 FDU650FKXZE1 FDU650FKXZE1
10HP (5HP) (5HP) 18HP (5HP) 6HP 6HP
(Micro)
Concept (Difference between FDU-F and SAF)

SAF is the energy recovery ventilation unit which can recover heat energy from exhaust air to supply air and "has no air processing
function, but FDU-F is air processing unit which can treat the supply air closer to room temperature by cooling or heating in connection
with KXZ refrigerant system and exhaust air is discharged to outside of the room.
FDU-F OA Processing units
Outside
Exhaust Air
Air Supply
Direct Expansion
Heat Exchanger
SAF
Outside
Air Supply
Exhaust Air
109
R410A
Specifications
Item Model FDU650FKXZE1 FDU1100FKXZE1 FDU1800FKXZE1 FDU2400FKXZE1
Nominal cooling capacity kW 9.0 14.0 22.4 28.0
Nominal heating capacity kW 6.5 10.5 16.0 21.5
Power Cooling 0.24-0.25 0.35-0.36 1.16-1.20 1.16-1.20
Sound pressure level dB(A) Hi:31 Hi:37 Hi:42 Hi:45
Exterior dimension
mm 280x950x635 280x1370x740 379x1600x893
HxWxD
Net weight kg 34 54 89 89
Air flow (Standard) m3/min Hi:11 Hi:18 Hi:30 Hi:40
External static pressure Pa 200 (at Hi Air flow)
Air filter, Q'ty Procure locally
Installation data mm Liquid line:ø9.52(3/8") Liquid line:ø9.52(3/8") Liquid line:ø9.52(3/8")
Refrigerating piping size (in) Gas line:ø15.88(5/8") Gas line:ø19.05(3/4") Gas line:ø22.22(7/8")
1. The data are measured at 33ºCDB 28ºCWB (68%RH) during cooling and 0ºCDB-2.9ºCWB (50%RH) during heating (no frost).
2. Temperature range of outdoor air must be 20~40ºCDB (32ºCWB) during cooling and 0~24ºCDB during heating.
3. Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient conditions.
4. The factory E.S.P. setting is set within the range of 10 - 120Pa.lf SW8-4 is turned to “ON”, E.S.P. setting range can be changed to 10 - 200 Pa. (with RC-EX3 and RC-E5 only)
Dimensions
FDU650FKXZE1 Symbol Content

C1 Drain piping VP25(O.D.32)
C2 Drain piping(Gravity drainage) V20(O.D.26)
D Hole for wiring
E Suspension bolts M10
F Outside air opening for ducting (Knock out)
G Air outlet opening for ducting (Knock out)
H lnspection hole (450X450)
110
FDU1100FKXZE1
Symbol Content
C1 Drain piping VP25(O.D.32)
C2 Drain piping(Gravity drainage) V20(O.D.26)
D Hole for wiring
F Outside air opening for ducting (Knock out)
G Air outlet opening for ducting (Knock out)
H lnspection hole (450X450)
FDU1800FKXZE1, FDU2400FKXZE1
Content
Symbol
MODEL 1800 2400
A Gas piping ø19.05 (3/4") ø22.22 (7/8")
B Liquid piping ø9.52 (3/8") (Brazing)
C Drain piping(Gravity drainage) VP25(O.D.32)
D Hole for wiring
F Inspection hole (450X450)
111
R410A
Fresh Air Ventilation and Heat Exchange unit

SAF-E7
Model No.
SAF150E7 NEW
SAF250E7
SAF350E7
SAF500E7
SAF800E7
SAF1000E7
Capturing this waste energy, means the heating/ cooling requirements

Energy Performance of Building Directive - EPBD of the building are reduced, so smaller size plant can be selected,
EPBD limit the amount of electrical/gas power to be used to provide savings can be made in long term energy consumption, and carbon
heating or cooling in commercial buildings. Therefore the building emissions are reduced.
designer needs to select energy efficient heating/cooling equipment,
and to minimise energy losses through ventilation systems.
The SAF recovers heat energy which would otherwise be exhausted Switch box
to atmosphere, and uses this energy to warm the air entering the NEW NEW
(option)
building. The reverse happens in warmer climates, where the
exhausted cool air is used to partially cool the incoming air.
Increased external static pressure at UHi air flow
Pa
140
140 140 140 Previous New
120
120
100
105 105 105
80 90 95 90
Remote control
The following functions are newly available.
・ON/OFF Timer – The hour and minute of timer
SAF250E7 SAF350E7 SAF500E7 SAF800E7 SAF1000E7 on/off can be set.
・Filter Sign – Announces the due time for cleaning
the air filter.
Specifications
Item Model SAF150E7 SAF250E7 SAF350E7 SAF500E7 SAF800E7 SAF1000E7
Exterior dimensions
Height x Width x Depth mm 270x970x467 270x882x599 317x1050x804 317x1090x904 388x1322x884 388x1322x1134
Exterior appearance Galvanized steel sheet
Power input W 92-107 108-123 178-185 204-225 360-378 416-432
Running current A 0.42-0.45 0.49-0.51 0.81-0.77 0.93-0.94 1.64-1.58 1.89-1.80
Enthalpy Cooling 63 63 66 62 65 65
exchange
UHi efficiency Heating 70 70 69 67 71 71
Temperature exchange efficiency 75
Capacity
exchange
Hi efficiency Heating % 70 70 69 67 71 71
Temperature exchange efficiency 75
exchange
Lo efficiency Heating 73 72 73 69 74 76
Temperature exchange efficiency 77 77 78 76 76 79
Motor & Q'ty W 10 x 2 20 x 2 40 x 2 70 x 2 180 x 2 180 x 2
Air handling equipment Fan type & Q’ty Sirocco fan x 2
UHi 150 250 350 500 800 1000
Air flow Hi m3/h 150 250 350 500 800 1000
Lo 120 190 240 440 630 700
UHi 80 105 140 120 140 105
External static pressure Hi Pa 70 95 60 60 110 80
Lo 25 45 45 35 55 75
Net weight kg 25 29 49 57 71 83
Remote control Included
Supply air
Air filter Protection for element (Washable) PS400
Exhaust air
112
Structure (SAF800E7) Principle of operation (simple ventilation) Principle of operation (heat exchanging)
Heat exchanger element Damper FREE COOLING ENERGY RECOVERY
Exhaust Air outdoor indoor Supply Air Exhaust Air outdoor indoor Supply Air
EA RA
(Exhaust Air) (Room Air)
27 ºC 10 ºC 33 ºC 29 ºC
Outside Air Room Air Outside Air Room Air
10 ºC 27 ºC 35 ºC 27 ºC
OA SA
(Outside Air) (Supply Air)
e.g. For cooling
in winter time
Dimensions
SAF150E7, SAF250E7, SAF350E7, SAF500E7 SAF800E7, SAF1000E7

2 5 6 10 9 2 5 6 8 10 9
RA EA RA
EA (Exhaust Air)
(Exhaust Air) (Room Air) (Room Air)
OA SA
OA SA (Outside Air) (Supply Air)
(Outside Air) (Supply Air)
4-13 x 30
11 1 7 4-13 x 30 11 1 7 oblong hole
oblong hole
Applied duct
Model No. Nominal
diameter
Applied duct
SAF150E7 ø100 Nominal
Model No. diameter
SAF250E7
ø150 SAF800E7
4 8 3 12 SAF350E7 ø250
SAF1000E7
SAF500E7 ø200 4
3
12
Dimension table Unit:mm Dimension table Unit:mm
Model A B C E F G H I J K L M N P Model A B C E F G H I J K L M N P
SAF150E7 467 970 49 525
82 303 82 ø98 ø110 SAF800E7 884 940 428
810 135 159 270 1322 85 1250 19 228 612 194 218 388 ø242 ø258
SAF250E7 599 882 95 655 142 315 142 ø164 SAF1000E7 1134 1190 678
19 ø144
SAF350E7 804 1050 978 860 112 580 112 ø164
70 159 182 317
SAF500E7 904 1090 1018 960 132 640 132 ø194 ø210
NO. Name Qt'y

1 Frame 1 Installation reference
2 Adaptor 4 Air supply duct
3 Terminal board 1 Ceiling suspension bolt
4 Inspection Cover 1 Outer air intake duct
5 Fan 2
Pipe hood
6 Motor 2 SA
(Supply Air)
Heat Exchange Element
SAF150E7 1 RA
SAF250E7 1 (Room Air)
7 SAF350E7 2
SAF500E7 2 Inside supply opening
3
EA
SAF800E7 OA (Exhaust Air) (Supply/exhaust air grill)
SAF1000E7 4 (Outside Air) Room intake duct
8 Filter 2 Heat insulation Room intake opening
material (Supply/exhaust air grill)
9 Damper 1
Pipe hood Outside intake duct
10 Damper Motor 1
11 Suspension fitting 4
Note:An inspection port is needed for cleaning the heat exchanger and filter 1 or 2 times a year.
12 Electrical components box 1
Model SAF350E7, SAF500E7 have different fan and
motor locations.
113
R410A
Fresh Air DX Assembly Drain up kit

(option, built-in type)
(600mm)
Remote control
(option)
Wired
DXA-DU-E
RC-E5 RCH-E3
Model No. Wireless

SAF-DX250E6 NEW
SAF-DX350E6
SAF-DX500E6
SAF-DX800E6 RCN-KIT4-E2
SAF-DX1000E6
• SAF-DX is a heating or cooling coil incorporating KXZ series controls. It can be used in combination with our SAF series of total heat exchanger.
• Combination of SAF-DX together with other indoor units is possible. The capacity code index of each model is shown below and must be used when
making the system selection. Total capacity code index must be within 100% of outdoor unit capacity code index.
• Remote control option is the same as with other indoor units (see above). Connection to all Superlink controls is also possible.
• Optional condensate lift mechanism is also available (600mm height).
• Return air temp. control or supply air temp. control can be selectable.
RA (Room Air)
OA
(Outside Air)
Total heat SAF-DX
Supply / fresh air temp.
exchanger sensor
Return / fresh air
EA temp.sensor SA (Supply Air)
(Exhaust Air)
Heating or cooling coil
SAF-DX can provide heating or cooling to the fresh air supplied through a 3rd party air handling unit or total heat exchanger such as our SAF series.
Specifications
Item Model SAF-DX250E6 SAF-DX350E6 SAF-DX500E6 SAF-DX800E6 SAF-DX1000E6
Nominal cooling capacity *1 kW 2.0 2.8 3.6 5.6 6.3
Nominal heating capacity *2 kW 1.8 2.2 2.8 4.5 5.6
Capacity code 22 28 36 56 71
Power Cooling 7.2-7.2
consumption Heating W 7.2-7.2
Running Cooling 0.05-0.05
A
current Heating 0.05-0.05
Exterior dimensions
mm 315 x 452 x 422 315 x 537 x 422 315 x 682 x 422 315 x 822 x 422
HxWxD
Net weight kg 12.3 13.6 16.1 18.4
Air flow (Standard) m3/h 250 350 500 800 1000
Internal resistance Pa 38 66
Remote control(option) wired: RC-E5, RCH-E3 wireless: RCN-KIT4-E2
(1) The data are measured at the following conditions.
Item Return/fresh air temperature Outdoor air temperature Standards
Operation DB WB DB WB
Cooling*1 27ºC 19ºC 35ºC 24ºC
ISO-T1
Heating*2 20ºC 7ºC 6ºC
(2) This air-conditioner is manufactured and tested in conformity with ISO-T1 "UNITARY AIR-CONDITIONERS".
114
Dimensions
SAF-DX250E6,350E6 SAF-DX500E6
SAF-DX800E6 SAF-DX1000E6
115
R410A
EEV-KIT KXZ
Outdoor units
DX-AHU
• EEV-KIT is the control kit for operating the locally provided
AHU or FCU with direct expansion heat exchanger coils in
connection with the KXZ / KXE6 system.
(AHU : Air Handling Unit, FCU : Fan Coil Unit)
• EEV-KIT is composed of one EEV-Control ASSY and one
EEV-Set.
EEV-KIT
DX : Direct expansion coil
Features
EEV-Control Assy has 2 types.
Refrigeration system EEV-Control Assy System configuration
EEVKIT6-E-M EEVKIT6-E-C
Single Not Use 1 box-Many boxes • Single refrigeration system EEVKIT6-E-C … Possible with multiple
Multiple 1 box (for master) Many boxes(for slave) • Multiple refrigeration system EEVKIT6-E-M (1) + EEVKIT6-E-C …
Possible with multiple (Max32)
EEV-Set Select from following 3 types according to the coil capacity.
Type EEV6-71-E EEV6-160-E EEV6-280-E • EEVKIT6-E-C is common for both single and multiple refrigeration systems
Capacity 22-71 90-160 224-280
Single refrigerant system

• Single refrigeration system is one that can have multiple outdoor units on one refrigerant pipe work circuit.
• There are 2 types of EEV-KIT systems that can be built into the single refrigeration system.
• System A : one EEV-KIT.
• System B : multiple EEV-KIT’s.
System A System B
• This system has only one set of EEV-KIT built into one • System B is a system that has multiple EEV-KIT’s built into one indoor unit
indoor unit with only one heat exchanger. This system can with multiple heat exchangers on one refrigerant circuit.
be applied to an indoor unit whose capacity is up to 10HP. • This system can be applied up to 60HP(for KXZ), 48HP(for KXE6) AHU
capacity.
EEV-Set
EEV-Set×2 sets
FAN FAN
EEV-Control box×2 sets
116
Multiple refrigerant system
Multiple refrigeration system is an AHU system with
1) Multiple independent refrigerant circuits
2) One master control to control the whole system.
Advantage
• Large systems are possible [max capacity 896kW (Indoor unit : 28kW x 32)]
• External control FAN
• Capacity step control

Additional parts over a single refrigeration system
• One master control
The slave EEV control and EEV set are the same as a single refrigeration
system.
Master EEV-KIT
Master EEV-Control box FAN
Slave EEV-KIT #1 Slave EEV-KIT #2 #3 • • • •
Sensor (2pcs)
Slave EEV-Control box Slave EEV-Control box
Heat exchanger temp. Heat exchanger temp.
Return air
temp. sensor
Supply air
Sensor x 3
EEV x 1
Sensor (Thi-R1,R2,R3)
EEV-Set
Sensor x 3
EEV x 1
Sensor (Thi-R1,R2,R3)
EEV-Set
••••
temp. sensor
Thi-A Thi-AF Strainer Strainer Strainer Strainer
Connection to SUPERLINK II
Single refrigeration system
Superlink Adapter
SC-ADNA-E SL4
DX-FCU
Slave1 FDT
Single System A Remote control line
Slave2
KXZ KXZ
DX-FCU
Single System B KXZ
Multiple refrigeration system
Superlink Adapter
SC-ADNA-E SL4
DX-FCU
Master FDT
Remote control line Single System A
Slave1
KXZ KXZ
Slave2 KXZ KXZ
Slave3
Slave4
DX-AHU
Multiple System
117
R410A
Control Systems
<Individual control>
Remote Control line up
indoor unit remote control indoor unit remote control indoor unit remote control indoor unit remote control
RC-EX3 FDT RCN-T-5AW-E2 FDTS RCN-TS-E2 FDE RCN-E-E2
wired all models RC-E5 wireless FDTC RCN-TC-24W-E2 FDK22~56 RCN-K-E2 FDFW RCN-FW-E2
RCH-E3 FDTW RCN-TW-E2 FDK71 RCN-K71-E2 others* RCN-KIT4-E2
*FDTQ, FDU, FDUM, FDUT, FDUH, FDU-F
Wired remote control (option)

RC-EX3
Easy touch and Easy view with full dot Liquid Crystal display
User friendly Easy view
•LCD panel with light tap operation •Big LCD with 3.8 inch full dot display
introduced as the industry's first •Back light function
•Simple interface with only three buttons •Multi language display (12 languages)
Setting temperature screen

Operation mode
Operation mode setting screen
Cooling Fan
Dry Heating
Auto
The desired operation mode can You can select the temperature as
be selected by simply tapping desired by tapping button.
this button. Run / Stop
High power operation Energy-saving operation

The highest capacity operation (Max 15 minutes) •Changes set temperature.
•Increasing compressor speed At 28ºC in cooling mode and 22ºC in heating mode, 25ºC in auto mode.
•Increasing air flow volume •Operation correction by outdoor temperature
2. Main functions
Function name Description
Energy-saving operation Since the capacity is controlled automatically based on the outdoor temperature, energy can be saved without losing comfort.
Sleep timer Set the time period from start to stop of operation. The selectablerange of setting time is from 30 to 240 minutes (at 10-minuteintervals).
Set temperature auto return The temperature automatically returns to the previously set temperature.
Economy Set ON timer by hour When the set time elapses, the air conditioner starts.
& Set OFF timer by hour When the set time elapses, the air conditioner stops.
Timer Set ON timer by clock The air conditioner starts at the set time.
Set OFF timer by clock The air conditioner stops at the set time.
Weekly timer On or Off timer can be set on a weekly basis.
Peak-cut timer Capacity control can be set by using peak cut function on RC-EX3 for better energy saving. Five-step capacity control is available.
Home leave operation When the unit is not used for a long period of time, the room temperature is maintained at a moderate level, avoiding extremely hot or cool temperatures.
Big LCD & Touch screen panel Large 3.8 inch screen has resulted in improved visibility and operability.
Easy modification of Individual flap control User can visually confirm and set the direction of flaps using the visual display on the remote controller.
Comfort Automatic fan speed *1 The micro-computer automatically adjusts the airflow effectively to follow the changes of return air temperature.
Temp increment setting Temperature increment for the change of the set temp can be changed.
Silent mode Set the period of time to operate the Outdoor unit with prioritizing the quietness.
Function switch The function switch allows user to select and set two functions among seven available functions.
Favorite setting Operation mode, set temperature, fan speed and air flow direction automatically adjust to the programmed favorite setting.
Adjusting Brightness of the background light The brightness of the background light can be adjusted by 10 stages.
LCD contrast setting This function allows user to adjust LCD display contrast.
Convenience High power operation High Power Mode increases the unit operating ability for 15 minutes to quickly adjust the room temperature to a comfortable level.
Back light setting This convenient function allows user to see controls under low light conditions.
Administrator settings This function only allows specific individuals to operate the unit.
Setting temp range Limited range of setting temperature in the heating or the cooling operation can be selected.
External Input/Output Function The external input/output of indoor unit by remote controller can set input/output based on user needs.
Select the language Set the language to be displayed on the remote control.
USB connection (mini-B) This function allows batch input of schedule timer settings and other settings involving a large amount of data.
Error code display This function allows user to check information displayed when abnormal function of the unit occurs.
Operation data display Displays various types of air conditioner operation data in real time.
Service Contact company display Address of the service contact is displayed.
Filter sign Announces the due time for cleaning of the air filter.
Static pressure adjustment Allows user to adjust duct static pressure using the remote control.
Backup Control Allows for rotation control, fault backup control, and capacity backup control.
*1 Cannot be used when a centralized control remote is connected.
118
Wireless remote control (option)
For wireless control simply insert the infra-red receiver kit on a corner of the panel
RCN-T-5AW-E2, RCN-TW-E2 RCN-TS-E2 RCN-K-E2, RCN-E-E2 RCN-FW-E2 RCN-KIT4-E2

RCN-TC-24W-E2 RCN-K71-E2
*The wireless remote control is not applicable to the Individual flap control system.
Wired remote control (option)
RC-E5 Run hour meters to facilitate maintenance checking

The RC-E5 controller enables RC-E5 stores operation data when an anomaly occurs and indicates
extensive access to service and the error on the LCD. It also displays cumulative operation hours of
maintenance technical data the air conditioner and compressor since commissioning.
combined with easy to use
Room temperature controlled by the remote control sensor
functions and a clear LCD display.
The temperature sensor is housed in the top
section of the remote control unit. This arrangement
has improved the sensitivity of the remote control
unit’s sensor, which permits more finely
controlled air conditioning.
Weekly timer function as standard Changeable set temperature ranges

RC-E5 provides (as a standard feature) a weekly timer, which RC-E5 allows the upper and lower limits of a set temperature range
allows one-week operation schedules to be registered. A user can to be specified separately.
specify up to four times a day to start/stop the air conditioner. By adjusting a set temperature range, you can ensure energy saving
(Temperature setting is also possible with the timer). air conditioning by avoiding excessive cooling or heating.
Changeable range
Upper limit 20~30ºC(effective for heating operation)
Timer operation
Lower limit 18~26ºC(effective for non-heating operation)
Simple remote control (option) Thermistor (option)

RCH-E3 (wired) SC-THB-E3
Considering specialized usage in hotel rooms, control buttons are limited only to In case sensor in the indoor units or the
minimum required functions such as ON/OFF, mode, temperature setting and fan remote control sensor can not sense the
speed. It is really simple and easy to use. room temperature correctly, or individual
remote control in each room is not required
Up to 16 units AUTO restart but only sensor is required (as when center
It can control up to 16 units This function allows starting the air conditioner control system is in
individually, with pressing the automatically when power supply is restored after place), install
AIR CON No. button. power failure or by turning on the power switch.
SC-THB-E3 at
proper place in 8m
*RCH-E3 is not applicable to the Individual flap control system.
*When RCH-E3 is used, the fan speed setting can only be set to 3 speed settings (Hi-Me-Lo). the rooms.
119
R410A
<SUPERLINK - Control System>

Mitsubishi Heavy Industries Thermal Systems has now combined simplicity of installation with our highly sophisticated Superlink- control system, to
offer building owners and occupiers a comprehensive control and management system, while providing complete commissioning and service
maintenance assistance for installers and service engineers. The Superlink- network utilises two wire, non-polar cable - for further details of wiring.
Superlink- is an advanced high speed data transmission system that can connect up to 128 indoor units and 32 outdoor units as a network. Mitsubishi
Heavy Industries Thermal Systems offers a wide range of control options for the Superlink- network to suit any application large or small, as well as
connection to new or existing building management systems. Individual Mitsubishi Heavy Industries Thermal Systems split systems can also be
integrated on to the Superlink- network using SC-ADNA-E.
Central control
SC-SL4-A,-B
Central Control SC-SL2NA-E

Monitiring PC Capable of control and monitoring up to 64
(Web Browser) indoor units. All operational functions, plus
enable/disable connected remote control.
Web gateway & BACnet gateway

SC-WBGW256
Building Management system

Host computer
Central Control
SC-SL4-AE/BE
Lonworks gateway
SC-LGWNB
Central Control SC-SL1N-E
SUPERLINK E BOARD(SC-ADNA-E)
This board is used when conducting control of the single package (wired remote control unit) 1-type series using a network option.
Blue
SL E board A A Connected to the terminals for
Abnormal
Blue Superlink signal lines

Run
B B MVVS 0.75 - 1.25mm2

Black
LED2
LED3
X X Connected to the remote control terminals (no

White polarity) (the length should be 600 m or shorter)
Y Y
200 m or shorter 0.5 mm2 x 2 cores
ON 400 m or shorter 1.25 mm2 x 2 cores
OFF SW3 SW1 SW2
Master/Sub Network address setting switches

address [000]-(127)
120
Lighting Fan
"Micro KXZ" "Micro model" SC-GIFN-E

outdoor units outdoor units Multi-KX6/KXZ indoor units
Individual On/Off Control
KXZ Outdoor units

Multi-KX6/KXZ indoor units
KXZ twined Outdoor units
Multi-KX6/KXZ indoor units

with individual room control
3-core + earth cable 3-core cable for 3-core cable for 3-core + earth cable
for connecting indoor connecting indoor connecting indoor for connecting indoor
and outdoor units and outdoor units and outdoor units and outdoor units
RACseries
Wireless
remote
control
SC-ADNA-E SC-ADNA-E SC-ADNA-E SC-ADNA-E
SC-BIKN2-E is necessary to connect to wired remote controller.
121
R410A
<Central Control>
SC-SL4-AE/BE Indoor unit 128 units
Mitsubishi Heavy Industries Thermal

Systems introduces the full colour
touch screen central control
SC-SL4-AE/BE, with 9 inch
interactive LCD display. Offers
control, monitoring, scheduling and
service/maintenance functions for up
to 128 indoor units.
Control with PC is available by use
of internet explorer.
Indoor units can be controlled,

scheduled, monitored and either
individually, as groups or as blocks
of groups with the following
functions:
Collective operation output
Control Monitoring Scheduling Administration/Service
Ethernet 10 BASE-T/
Run/Stop / Home leave Operating state Yearly schedule Block definition, Floor layout 100BASE-TX Emergency stop signal input
Mode (cool/heat/fan/dry/Auto) Mode Today's schedule Group definition
Internet
Set temperature Set temperature Detailed daily schedule Unit definition Explorer HUB Watt-hour meter pulse input
Operation permitted/prohibited Room temperature Season setting Time and date setting
Operation permitted/
Fan speeds Alarm history
prohibited
PC requirements: Windows Vista or Windows 7, 8.1
Air direction Fan speed Energy consumption calculation period Monitor resolution 1280 x 1024 or more.
Filter sign reset Air direction Energy consumption, cumulative operation time Web browser requirements: Internet Explorer 9, 11
Demand control (3 steps) Filter sign Flap control setting
Maintenance Operation data monitoring
Emergency stop (1, 2 or back-up)
Outdoor air Data logging (Run / Stop set temperature , room
temperature temperature , outdoor air temperature )
Schedule setting Operation time history

For each group Yearly Schedule Possible to check operation time history for
Schedule settings for each group are possible. Schedule settings for a year are also possible. cooling and heating separately.
The RUN/STOP/HOME LEAVE time, operation The weekday, holiday, special day 1 or special
mode, remote control Lock/Unlock setting, day 2 can be selected and set.
temperature setting, energy setting, and silent
mode can be set up to 16 times per day.
Alarm history High visibility

A maximum of 300 records is displayed for the Increasing in size from 7 to 9 inches
history of error occurrence and restoration in the 250mm
unit of air-conditioner. Contrast between five colors for
It is possible to output the history data to a CSV icon display and black light base
data file. screen has achieved high visibility.
172mm
Green : in operation
23mm Blue : stop
Red : error
9 inch wide LCD Yellow : communication error
Gray : no groups
122
Block layout function Web function
You can monitor and control up to 128 indoor units (Max.128 groups)
from a PC or tablet PC.
Import of floor layout is possible.
(JPEG) Internet
Explorer
Tablet
PC
Possible to move Group

icon to any place in
<Example>
imported layout.
Monitoring and operating air-conditioners in a lecture room of a university
Lecture room Administration room
3 levels of demand control from 2 external inputs

External Wiring terminal block
Not objective Set to D1 Set to D2 Set to D3

Demand
Control Operation Center/ Set temp. Operation Center/ Operation Center/ Set temp. Operation Center/
level Set temp. Remote mode Remote Set temp. mode Remote mode Remote
mode
0 Normal – – – – – – – – – – – –
1 Temp. shift – – – Shift – Center – – – – – –
Fan – – – – Fan Center – Fan Center – – –
2 (1stage)
Fan – – – – Fan Center – Fan Center – Fan Center
3 (2stage)
Demand level 1 – Any indoor unit set to D1 (Demand level 1)has its temperature set point shifted by +2°C in cooling mode or -2°C in heating
mode and cannot be operated from the local remote controller
Demand level 2 – Any indoor unit set to D1 or D2 switch to fan only mode and cannot be operated from the local remote controller
Demand level 3 – Any indoor unit set to D1 or D2 or D3 switch to fan only mode and cannot be operated from the local remote controller
Electric power calculation function: Item Model SC-SL4-AE/SC-SL4-BE

(for SC-SL4-BE only) Ambient temperature during use 0 ~ 40oC
SC-SL4-BE gives electric power consumption data (kWh) for each indoor unit , Power supply 1 Phase 100-240V 50/60Hz
each group , each SUPERLINK-II system , and each watt-hour meter input. Power consumption 9W
External dimensions
(Height x Width x Depth) 172mm x 250mm x 23 (+70) mm
Net weight 2.0kg

Number of
connectable units (indoor units) up to 128 units
LCD touch panel Colour LCD, 9 inches wide

SL (Superlink) signal inputs 1 system (Super link- )
Watt-hour meter pulse input* 8-point, pulse width 80ms or more
Inputs
1 point, non-voltage a contact input

Emergency stop signal input* continuous input (closed, forced stop)
2 point, non-voltage a contact input
Demand signal input* continuous input (closed, demand control)
SC-SL4-BE 1 point, maximum rated current 40mA, DC24 V
Export data by USB / LAN Operation output
All units stop; Open, any unit operating;Close
Outputs
Calculation software Included 1 point maximum rated current 40mA, DC24 V

Watt-hour meter Error output Normal; closed. If even one unit is abnormal; Open
pulse input (Maximum) 8 (Open/closed can be changed)
Max connectable indoor units 128 * The receiving side power supply is DC 12V (10mA).
The air conditioning charges calculations of this unit are not based on OIML, the international standard.
123
R410A
SC-SL1N-E
Start/stop control of up to 16 indoor units either
individually or collectively.
Simple centralised control.
1. The SC-SL1N-E is connected to the Superlink- network via 2-core, non-polar wires (‘AB’ connection).
2. It will monitor and control the start/stop function of up to 16 units, with the sixteen operation button.
3. The unit or group numbers in operation or in need of service are displayed with an LED.
4. Collective start/stop is also available through the simultaneous on/off button.
5. Up to 12 SC-SL1N-E units can be connected to a Superlink- network (consisting of up to 128 indoor
units).
6. If a power failure occurs, the SC-SL1N-E will resume the operation of the system according to a stored
operation condition, once power is restored.
SC-SL2NA-E
Central control of up to 64 indoor units including weekly timer function as standard.
1. The SC-SL2NA-E is connected to the Superlink- network via 2-core, non-polar wires (‘AB’
connection).
2. It will monitor and control the start/stop function of up to16 units, or 16 groups of units, with the
sixteen operation buttons.
3. It also monitors and controls the following functions for individual units, groups of units or the
complete network: operation mode, set point temperature, return air temperature, louvre position,
error code. Air flow and center lock function.
4. The unit or group numbers in operation or in need of service are displayed with an LCD.
5. Collective start/stop is also available through the simultaneous on/off button.
6. If a power failure occurs, the SC-SL2NA-E will resume the operation of the system according to a
stored operation condition, once power is restored.
7. The SC-SL2NA-E can be connected to an external timer to facilitate timed on/off cycles.
Example of control by a center control SC-SL2NA-E SC-GIFN-E Interface kit

• Applicable products
Ventilation fan, Air purifier
• By using SC-GIFN-E together with central control such as SC-SL1N-E,
SC-SL2NA-E and SC-SL4-AE/BE, you can start-stop, operate & monitor
the operation of applicable products.
SL1N-E
Address setting switch
Set address number will
Printed board
SW1 ten's place be the address for
SW2 one's place
SC-SL1N-E,
SC-SL2NA-E,
hundred's SC-SL4-AE/BE
SW3 place
Terminal block
51X 52 52R
1 2 3 4 5 6 7 8 A B
Net work communication line

AC220-240V To A & B terminal block on
SC-SL1N-E,
Anomalous signal input SC-SL2NA-E,
SC-SL4-AE/BE
Operation signal input Net work
Start-Stop command output
An SC-SL2NA-E performs the start/stop control, monitoring and mode setting of up to 64 units. It
is a high quality air conditioner control system that allows up to 64 indoor units to be freely
grouped into 1 to 16 groups.
It allows not only the start/stop control but also the monitoring, display of operation statuses such
as in operation or in need of service and mode setting such as switching of operation modes of
connected units collectively, by group or individually.
• Outer dimensions: H120 x W215 x D25+35*mm.
35* is the measurement including the part contained in a recess.
Note:Please consult dealer for combination of center controls and Building Management Systems interface units.
124
<Building Management Systems>
SC-WBGW256 (Web gateway+BACnet
BACnet gateway) Production by order
SC-WBGW256 control and monitoring of up to 256 cells (some cells can have two or more indoor units and
total number of indoor units can be up to 256 units) centralised to a network PC using the Superlink- web
gateway. Simple installation is assured with no special software requirements, operation is via Internet
Explorer. A low power embedded CPU and compact flash ROM ensure a large storage capacity with high
reliability (no moving parts such as a PC fan, etc). An IP address filter function combined with three-level user
authentication check also ensures security.
Also, SC-WBGW256 can be used as interface devices that convert Mitsubishi Heavy Industries Superlink-
communication data to BACnet code and are controlled centrally from a building management system.
Additional engineering service cost etc. is required.

Please consult your dealer when using this central control.
[ In case of web gateway ]
SUPERLINK- No. 1 system
128 units
128 cells
Internet
Explorer HUB
Ethernet 10 BASE-T/ 128 cells

100BASE-TX
Emergency stop DI1 128 units
SC-ADNA-E
pulse
Watt meter pulse input
(no-voltage contact x8 points)
PC requirements: Windows 7 or Windows 8.1.
Cell Monitor resolution 1364 x 768.
Users can manage up to 1024 units by connecting the four devices!!
[ In case of BACnet gateway ]

128 units
128 cells
Ethernet 10 BASE-T/100BASE-TX
Internet
Explorer HUB
Network 128 cells
BACnet I/P Protocol.
for SUPERLINK- No. 2 system

lighting
128 units
SC-ADNA-E
Emergency Up to 4 WBGW256 can be handled by 1
sensor Internet Explorer Screen
network
(max. 256x4=1024 units)
Emergency stop DI1 Cell

pulse
Watt meter pulse input
(no-voltage contact x8 points)
SC-LGWNB (LonWorks gateway) Production by order
SC-LGWNB is an interface device that converts Mitsubishi Heavy Industries Superlink- communication data
to LonWorks code. Control and monitoring functions of the a/c system for up to 96 indoor units can be
integrated to a central control point via the building management system network.
48 units

Network 48 units
SC-ADNA-E
for
LonWorks network
lighting
(FTT-10)
Emergency Additional engineering service cost etc. is required.

sensor
network Please consult your dealer when using this gateway.
125
INTESIS BMS Interface for
Mitsubishi Heavy Industries Thermal Systems air conditioners
All technical support, including specifying work, compatibility issues, product quality (repair and replacement issues), product liability issues
and the required after sales service (including spare parts supply) will be provided by Intesis as it is an Intesis product.
Product sales and delivery will be conducted by Intesis as well.
For details concerning such matters please directly contact Intesis.
Integration of Mitsubishi Heavy Industries Thermal Systems VRF in your KNX installation by Superlink
MH-AC-KNX-48 TOUCH SCREEN
(Max 48 indoor units / Superlink I & II)
MH-AC-KNX-128
(Max 128 indoor units / Superlink II)
Alarms Windows Lighting Energy

blinds management
HVAC
INTEGRATED GATEWAY
• Bidirectional: Supervision and Control

• Robust and reliable hardware
• Direct connection to KNX TP-1 BUS
• Independent management of communications
• Power supply: 230 VAC 50/60Hz
• Wall mounting case
Integration of Mitsubishi Heavy Industries Thermal Systems VRF in your Modbus installation by Superlink
MH-AC-MBS-48
(Max 48 indoor units / Superlink I & II)
MH-AC-MBS-128
(Max 128 indoor units / Superlink II) MODBUS
INTEGRATED GATEWAY
• Bidirectional: Supervision and Control

• Robust and reliable hardware
• Modbus TCP or Modbus RTU RS-485/RS-232
• Independent management of communications
• Power supply: 230 VAC 50/60Hz
• Wall mounting case
126
Integration of Mitsubishi Heavy Industries Thermal Systems PAC in your KNX installation by Remote control line
MH-RC-KNX-1i
Example : Example :
Device as Master Device as Slave
TOUCH SCREEN TOUCH SCREEN
Windows Energy Windows Energy

blinds management blinds management RC-E5
• Protocol : KNX TP-1 bus Alarms Lighting Alarms Lighting

• Dimension : 71 x 71 x 27 mm
HVAC HVAC
• External Power supply : no need
Integration of Mitsubishi Heavy Industries Thermal Systems PAC in your Modbus installation by Remote control line
MH-RC-MBS-1
Example : Example :
Device as Master Device as Slave
MODBUS MODBUS
• Protocol : Modbus RTU (RS-485)

• Dimension : 93 x 53 x 58 mm RC-E5
Integration of Mitsubishi Heavy Industries Thermal systems PAC in your EnOcean installation by Remote control line
MH-RC-ENO-1i/1iC
Example : Example :
Device as Master Device as Slave RC-E5
• Protocol : EnOcean
1i : 868MHz@EU
1iC : 315MHz@USA, ASIA
• Dimension : 100 x 70 x 28 mm
IntesisHome Please access the followings for details.

Your
our home in the cloud URL http://www.intesis.com
email info@intesis.com
Intesis Wifi Adaptors PAC Model: MH-RC-WIFI-1A
127
R410A
Energy efficient and environmentally conscious

Several radical design changes and engineering developments have brought about a
vast improvement in energy efficiency and environmental protection.
SEER and SCOP is defined in European regulations listed below.
No.2016/2281: requirement for air-heating products, cooling products, high temperature process chillers and fan coil
units.Seasonal efficiency is the new way of rating the true efficiency of heating and cooling products over an entire year.
Set by the EU's new regulation implementing Eco-Design Directive for Energy Related Product (ErP) which specifies
the minimum efficiency of air-conditioners manufacturers must integrate into their products.
The new Seasonal Efficiency rating system that must be used for heating and cooling by all manufacturers are;
SEER - Seasonal Efficiency Ratio (value in cooling)
This ratio represents the annual cooling performance divided by the annual consumption of electricity for
cooling.
SCOP - Seasonal Coefficient of Performance (value in heating)
This ratio is calculated as the divided reference annual heating performance by the annual consumption of
electricity for heating.
All models meet the performance required by LOT6/21.
RoHS:Restriction of Hazardous substances

In order to avoid the release of hazardous substances into the environments, all models have utilized
lead-free solder application. It has been considered to be difficult to use lead-free solder for practical
applications because it requires higher solder temperatures at assembly, which can jeopardize reliability.
However our PbF soldering method can produce a higher quality lead-free printed circuit board.
Employment of
All models use refrigerant R410A characterized by the ozone depletion coefficient being 0.
Excellent Energy Saving

High performance and excellent energy savings are achieved at the same time by heat exchanger's
increased capacity and employment of high efficiency DC motor.
Outdoor unit FDC140KXZEN1 FDC140KXZES1 FDC155KXZEN1 FDC155KXZES1 FDC224KXE6 FDC280KXE6 FDC335KXE6
SEER / SCOP (Outdoor unit) 7.73 / 4.59 7.73 / 4.59 7.21 / 4.55 7.21 / 4.55 6.55 / 4.55 6.03 / 4.54 5.77 / 4.49
Outdoor unit FDC280KXZE1 FDC335KXZE1 FDC400KXZE1 FDC450KXZE1 FDC475KXZE1 FDC500KXZE1 FDC560KXZE1
Outdoor unit FDC224KXZXE1 FDC280KXZXE1 FDC335KXZXE1 FDC224KXZRE1 FDC280KXZRE1 FDC335KXZRE1 FDC400KXZRE1
Outdoor unit FDC450KXZRE1 FDC475KXZRE1 FDC500KXZRE1 FDC560KXZRE1 FDC615KXZRE1 FDC670KXZRE1
SEER / SCOP (Outdoor unit) 6.04 / 4.33 6.60 / 4.27 7.01 / 4.54 6.25 / 4.29 5.79 / 4.34 5.78 / 4.66
Outdoor unit FDC224KXZPE1 FDC280KXZPE1 FDCR224KXE6 FDCR280KXE6
SEER / SCOP (Outdoor unit) 6.65 / 4.34 6.68 / 4.50 6.55 / 4.55 6.03 / 4.54
R410A refrigerant contained in the products is a fluorinated greenhouse gas listed in Regulation (EU) No 517/2014.
SEER/SCOP are based on EN14825:2016 and Commission regulation (EU) No.2016/2281. Temperature conditions for calculating SCOP are based on "Average climate".
128
MEMO
129
Before starting use
Heating performance Refrigerant leakage
The heating performance values (kW) described in the catalogue are the The refrigerant (R410A) used for Air conditioner is non-toxic and
values obtained by operating at an outdoor temperature of 7 C and indoor inflammable in its original state.
temperature of 20 C as set forth in the ISO Standards. As the heating However, in consideration of a state where the refrigerant leaks into the
performance decreases the outdoor temperature drops, if the outdoor room, measures against refrigerant leaks must be taken in small rooms
temperature is too low and the heating performance is insufficient, use other where the tolerable level could be exceeded. Take measures by installing
heating appliances as well. ventilation devices, etc.
Indication of sound values Use in snowy areas

The sound values are the values (A scale) measured in a chamber such as an Take the following measures when installing the outdoor unit in snowy areas.
anechoic chamber following the ISO Standards. In the actual installation
state, the value is normally larger than the values given in the catalogue due ·Snow prevention
to the effect of surrounding noise and echo. Take this into consideration Install a snow-prevention hood so that the snow does not obstruct the air
when installing. intake port or enter and freeze in the outdoor unit.
Use in oil atmosphere ·Snow piling

Avoid installing this unit in an atmosphere where oil scatters or builds up, In areas with heavy snow fall, the piled snow could block the air intake
such as in a kitchen or machine factory. port. In this case, a frame that is 50cm or higher than the estimated snow
If the oil adheres to the heat exchanger, the heat exchanging performance fall must be installed underneath the outdoor unit.
will drop, mist may be generated, and the synthetic resin parts may deform
and break. Automatic defrosting device
If the temperature is low, and the humidity is high, frost will stick to the
Use in acidic or alkaline atmosphere heat exchanger of the outdoor unit. If use is continued, the heating
If this unit is used in acidic atmosphere such as hot spring areas having high performance will drop.
level of sulfuric gases or in alkaline atmosphere including ammonia or The "Automatic defrosting device" will function to remove this frost.
calcium chloride, places where the exhaust of the heat exchanger is sucked After heating for approx, three to ten minutes, it will stop, and the frost will
in, or at coastal areas where the unit is subject to salt breezes, the outer plate be removed. After defrosting, hot air will be blown again.
or heat exchanger, etc., will corrode. Please ask a dealer or specialist when
you use an air conditioner in places differing from a general atmosphere. Servicing the air-conditioner
After the air-conditioner is used for several seasons, dirt will build up in
Use in places with high ceilings the air-conditioner causing the performance to drop. In addition to regular
If the ceiling is high, install a circulator to improve the heat and air flow servicing, we recommend the maintenance contract (charged for) by a
distribution when heating. specialist.
Safety Precautions
Air-conditioner usage target Installation
The air-conditioner described in this catalogue is a dedicated cooling/heating Always commission the installation to a dealer or specialist. Improper
device for human use. installation will lead to water leakage, electric shocks and fires.
Do not use it for special applications such as the storage of food items, Make sure that the outdoor unit is stable in installation. Fix the unit to
animals or plants, precision devices or valuable art, etc. stable base.
This could cause the quality of the items to drop, etc.
Do not use this for cooling vehicles or ships. Water leakage or current leaks Usage place
could occur. Do not install in places where combustible gas could leak or where there
are sparks.
Before use Installation in a place where combustible gas could be generated, flow or
Always read the "User’s Manual" thoroughly before starting use. accumulate, or places containing carbon fibers could lead to fires.
16-5, Konan 2-chome, Minato-ku, Tokyo, 108-8215 Japan

http://www.mhi-mth.co.jp/en/
(Wholly-owned subsidiary of MITSUBISHI HEAVY INDUSTRIES, LTD.)
Our factories are ISO9001 and ISO14001 certified.

Certified ISO 9001 Certified ISO 14001
ISO 9001 ISO 14001

Certificate:44 100 980813 Certificate:04 104 980813
Certificate Number : JQA-0709 Certificate Number : 4333-2007-AQ-RGC-RvA Certificate Number : YKA4005636 Certificate number : 02117E10160R0M
18KX01E February 2018 F Because of our policy of continuous improvement, we reserve the right to make changes in all specifications without notice.
Edited in Japan

433 All

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

433 All

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

433 All

Uploaded by

Copyright:

Available Formats

Mitsubishi Heavy Industries Thermal Systems VRF inverter multi-system Air-Conditioners

The Mitsubishi Heavy Industries Thermal Systems

KXZ Standard series 36~43

KXZ Hi-COP series 44~47

KXZ Heat recovery system 48~63

Water cooled series 64 . 65

High head series 66~69

Indoor units 76~115

Control systems 1 18~127

Energy efficient and environmentally conscious 128

KXZ system is the best solution

・High energy eﬃciency with advanced technology

・Long piping length and wide limitation of piping

・Individual advanced control by wired and

・Easy access for maintenance

"Micro series" for small offices,

Case study: Hotel and Leisure

Case study: Education

Previous Model KXZE1

By combining 3 outdoor units 60HP can be achieved

Heat pump systems

These systems provide either a heating or cooling operation to

The range has a total piping length of 1000m (KXZ)

22.4kW 28.0kW 33.5kW 22.4kW 28.0kW

FDC224 FDC280,335 45.0kW 50.0kW 56.0kW 61.5kW 67.0kW

FDC450 FDC500 FDC560~670 73.5kW 80.0kW 85.0kW 90.0kW 95.0kW 100.0kW

Hi-COP model KXZXE1

Heat recovery system KXZRE1

4way FDT FDT28KXZE1 FDT36KXZE1

4way Compact FDTC FDTC15KXE6F FDTC22KXE6F FDTC28KXE6F FDTC36KXE6F

1way Compact FDTQ FDTQ22KXE6F FDTQ28KXE6F FDTQ36KXE6F

Compact & FDUH FDUH22KXE6F FDUH28KXE6F FDUH36KXE6F

Ceiling Suspended FDE FDE36KXZE1

2way FDFW FDFW28KXE6F

Air flow m3/h 150 250 350 500

FDT45KXZE1 FDT56KXZE1 FDT71KXZE1 FDT90KXZE1 FDT112KXZE1 FDT140KXZE1 FDT160KXZE1

FDTW45KXE6F FDTW56KXE6F FDTW71KXE6F FDTW90KXE6F FDTW112KXE6F FDTW140KXE6F

FDU45KXE6F FDU56KXE6F FDU71KXE6F FDU90KXE6F FDU112KXE6F FDU140KXE6F FDU160KXE6F FDU224KXZE1 FDU280KXZE1

FDUM45KXE6F FDUM56KXE6F FDUM71KXE6F FDUM90KXE6F FDUM112KXE6F FDUM140KXE6F FDUM160KXE6F

FDUT45KXE6F-E FDUT56KXE6F-E FDUT71KXE6F-E

FDK45KXZE1 FDK56KXZE1 FDK71KXZE1 FDK90KXZE1

FDE45KXZE1 FDE56KXZE1 FDE71KXZE1 FDE112KXZE1 FDE140KXZE1

FDFU45KXE6F FDFU56KXE6F FDFU71KXE6F

Lite. FDU650FKXZE1 FDU1100FKXZE1 FDU1800FKXZE1 FDU2400FKXZE1

1. High Efficiency & Comfort

Comparison of COP in Heating Mode

High efficiency and compact design are realized by

Tetrahedral structure of Efficient Heat Exchanger

New Inverter Control Improved Scroll Compressor

• The VTCC is a newly developed energy saving function

Set temperature Set temperature

Off Off Off Target low pressure

Multiport compressor that achieves high efficiency (KXZ, KXZ Lite)

Concentrated winding motor achieves "High Output" and

Improved Heat-exchanger [Previous] [KXZ]

Strengthened resistance against frost

Vector control Vector Control