Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

General Description Features

The AZ4052 is high-speed si-gate CMOS device. The • Wide Operation Voltage: ±5.0V or 10V
AZ4052 is dual 4-channel analog multiplexers or • Low On-resistance:
demultiplexers with common select logic. Each - 55Ω (Typ.) at VCC-VEE=5V
multiplexer has four independent inputs/outputs (pins - 40Ω ( Typ.) at VCC-VEE=10V
nY0 to nY3) and a common input/output (pin nZ). • Ultra Low THD+N:
The common channel select logics include two digital 0.003% @ 10V, 0.008% @ 5.0V
select inputs (pins S0 and S1) and an active LOW • Ultra Low Crosstalk: -120dB
___ ___
enable input (pin E ). When pin E =LOW, one of the • Ultra Low Noise: 6.0μVRMS
four switches is selected (Low-impedance On-state) • Operating Temperature: -40ºC to 85ºC
___
with pins S0 and S1. When pin E =HIGH, all
switches are in the high-impedance Off-state,
independent of pins S0 and S1. VCC and GND are the
Applications
supply voltage pins for the digital control inputs (pins
___ • LCD TV/PDP TV/CRT TV
S0, S1 and E ). The VCC to GND ranges are 3.0V to • 4:1 Multi-channel Signal Selecting
10V. The analog inputs/outputs (pins nY0 to nY3 and
nZ) can swing between VCC as a positive limit and
VEE as a negative limit. VCC-VEE may not exceed 10V.
For operation as a digital multiplexer/demultiplexer, Function Table
VEE is connected to GND (Typically Ground).
Control Input On Channel
___
The AZ4052 is available in standard packages of E S1 S0
SOIC-16 and DIP-16. L L L nY0 nZ
L L H nY1 nZ
L H L nY2 nZ
L H H nY3 nZ
H X X None

SOIC-16 DIP-16

Figure 1. Package Types of AZ4052

Oct. 2011 Rev. 1.1 BCD Semiconductor Manufacturing Limited

1
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Pin Configuration

M Package P Package
(SOIC-16) (DIP-16)

2Y0 1 16 VCC

2Y2 2 15 1Y2

2Z 3 14 1Y1

2Y3 4 13 1Z

2Y1 5 12 1Y0

E 6 11 1Y3

VEE 7 10 S0

GND 8 9 S1

Figure 2. Pin Configuration of AZ4052 (Top View)

Pin Descriptions

Pin Number Pin Name Function

1 2Y0 2CH signal input or output terminal 0
2 2Y2 2CH signal input or output terminal 2
3 2Z 2CH common signal input or output terminal
4 2Y3 2CH signal input or output terminal 3
5 2Y1 2CH signal input or output terminal 1
6 E Enable input (Active LOW)
7 VEE Negative supply voltage
8 GND Ground (0V)
9 S1 Select logic input terminal 1
10 S0 Select logic input terminal 0
11 1Y3 1CH signal input or output terminal 3
12 1Y0 1CH signal input or output terminal 0
13 1Z 1CH common signal input or output terminal
14 1Y1 1CH signal input or output terminal 1
15 1Y2 1CH signal input or output terminal 2
16 VCC Positive supply voltage

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

2
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Functional Block Diagram

Figure 3. Functional Block Diagram of AZ4052

Schematic Diagram (One Switch)

Figure 4. Schematic Diagram of AZ4052

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

3
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Ordering Information

AZ4052 -

Circuit Type G1: Green

Package
M: SOIC-16 TR: Tape & Reel
P: DIP-16 Blank: Tube

Temperature Packing
Package Part Number Marking ID
Range Type
AZ4052M-G1 AZ4052M-G1 Tube
SOIC-16 -40 to 85°C
AZ4052MTR-G1 AZ4052M-G1 Tape & Reel

DIP-16 -40 to 85°C AZ4052P-G1 AZ4052P-G1 Tube

BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant
and Green.

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

4
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Absolute Maximum Ratings (Note 1, 2)

Parameter Symbol Condition Value Unit

Power Supply Voltage VCC -0.5 to 11.0 V
VI＜-0.5V,
Input Diode Current IIK 20 mA
VI＞VCC+0.5V
VS＜-0.5V,
Switch Diode Current ISK 20 mA
VS＞VCC+0.5V
Switch Current IS -0.5V＜VS＜VCC+0.5V 25 mA
VEE Current IEE 20 mA
VCC Current ICC
50 mA
GND Current IGND
TA=-40ºC to 85ºC
Power Dissipation PD 500 mW
(Note 3)
Storage Temperature Range TSTG -65 to 150 ºC
Operating Junction
TJ 150 ºC
Temperature Range
Power Dissipation Per Switch PS 100 mW
ESD (Machine Model) 200 V
ESD (Human Body Model) 2000 V

Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. These are stress ratings only and functional operation of the device at these or any other conditions
beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute
Maximum Ratings” for extended periods may affect device reliability.
Note 2: To avoid drawing VCC current out of pins nZ, when switch current flows in pins nYn, the voltage drop
across the bidirectional switch must not exceed 0.4V. If the switch current flows into pins nZ, no VCC current
will flow out of pins nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at
pins nYn and nZ may not exceed VCC or VEE.
Note 3: Above 70ºC derate linearly with 12mW/K (DIP-16 package).
Above 70ºC derate linearly with 8mW/K (SOIC-16 package)

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

5
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Recommended Operating Conditions

Parameter Symbol Condition Min Typ Max Unit

VCC-GND 3.0 10
Supply Voltage VIN V
VCC-VEE 3.0 10
Logic Input Voltage VI VEE VCC V
Switch Signal Input/
VIS/VOS VEE VCC V
Output Voltage
Operating Ambient
TA -40 85 ºC
Temperature Range
Input Rise and Fall VCC=5.0V 6.0 400
t r, t f ns
Time VCC=10V 6.0 250

Electrical Characteristics
DC Characteristics

VIS is the input voltage at pins nYn or nZ, whichever is assigned as an input; VOS is the output voltage at pins nZ
or nYn, whichever is assigned as an output, voltages are referenced to GND (Ground=0V).

Conditions
Parameter Symbol Min Typ Max Unit
Other VCC(V) VEE(V)
5.0 2.8
High-level
VIH V
Input Voltage 10 6.0

5.0 1.5
Low-level
VIL V
Input Voltage 10 3.0

Input Leakage 5.0 0 ±1.0 μA

ILI VI=VCC or GND
Current
10 0 ±1.0 μA
VI=VIH or VIL,
︱VS︱=VCC-VEE 5.0 ±1.0 μA
Analog Switch (Figure 5)
Off-state IS (Off)
Current Per Channel 10 0 ±1.0 μA

All Channels 10 0 ±2.0 μA

Analog Switch VI=VIH or VIL,
On-state IS (On) ︱VS︱=VCC-VEE 10 0 ±2.0 μA
Current (Figure 6)
Quiescent VI=VCC or GND, 5.0 0 50 160 μA
Supply ICC VIS=VEE or VCC,
Current VOS=VCC or VEE 10 0 100 320 μA

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

6
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Electrical Characteristics (Continued)

Resistance RON
VIS is the input voltage at pins nYn or nZ, which is assigned as an input ((note 4) see figure 7)

Conditions
Parameter Symbol Min Typ Max Unit
VCC VEE IS
Other
(V) (V) (μA)
On-resistance VIS=VCC to VEE,
5.0 0 1000 73 180 Ω
RON (Peak)
(Peak) VI =VIH or VIL 10 0 1000 47 120 Ω

5.0 0 1000 55 130 Ω

VIS=VEE,
VI =VIH or VIL
10 0 1000 40 100 Ω
On-resistance
RON (Rail)
(Rail)
5.0 0 1000 61 150 Ω
VIS=VCC,
VI=VIH or VIL
10 0 1000 45 110 Ω

Maximum
On-resistance 5.0 0 5 Ω
VIS=VCC to VEE,
Difference RON
VI=VIH or VIL
Between Any Two 10 0 6 Ω
Channels

Note 4: When supply voltages (VCC-VEE) near 2.0V the analog switch On-resistance becomes extremely
non-linear. When using a supply of 2V, it is recommended to use these devices only for transmitting digital
signals.

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

7
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Electrical Characteristics (Continued)

AC Characteristics
GND=0V, tr=tf=6ns, CL=50pF

Conditions
Parameter Symbol VCC VEE Min Typ Max Unit
Other
(V) (V)
Propagation 5.0 0 15 25 ns
RL=∞
Delay tPHL/tPLH
(Figure 24) 5.0 -5.0 12 25 ns
VIS to VOS
Turn-on Time RL=1kΩ 5.0 0 38 81 ns
___ tPZH/tPZL (Figure 25 and
E , Sn to VOS 26) 5.0 -5.0 26 81 ns
Turn-off Time RL=1kΩ 5.0 0 27 63 ns
___ tPHZ/tPLZ (Figure 25 and
E , Sn to VOS 26) 5.0 -5.0 22 48 ns

Recommended conditions and typical values, GND=0V, TA=25ºC, CL =50pF. VIS is the input voltage at pins nYn
or nZ, whichever is assigned as an input. VOS is the output voltage at pins nYn or nZ, whichever is assigned as an
output.

Conditions
Parameter Symbol VIS(p-p) VCC VEE Min Typ Max Unit
Other
(V) (V) (V)
f =1kHz, 0.5 5.0 0 0.008 %
RL=10kΩ
(Figure 8) 1.5 10 0 0.003 %
Sine-wave
dSIN
Distortion f=10kHz, 0.5 5.0 0 0.008 %
RL=10kΩ
(Figure 8) 1.5 10 0 0.003 %
Switch OFF RL=10kΩ, f=1MHz 5.0 0 -50 dB
αOFF
Signal (Figure 9),
(Feedthrough) 5.0 -5.0 -50 dB
Feed-through VIS=1VRMS
Crosstalk RL=10kΩ, 5.0 0 -120 dB
Between Two f=1kHz (Figure 10),
Channels VIS=1VRMS 5.0 -5.0 -120 dB
Crosstalk αCT(S)
RL =10kΩ, 5.0 0 -60 dB
Between Two
f=1kHz (Figure 10),
Switches 5.0 -5.0 -60 dB
VIS=1VRMS
/Multiplexers
Crosstalk RL =10kΩ,
___
Voltage f=1MHz, E or Sn,
Between Square-wave
Control and VCT(P-P) Between VCC and 5.0 0 110 mV
Any Switch GND,
(Peak-to-peak tr= tf=6ns
Value) (Figure 11)
Frequency 5.0 0 70 MHz
RL=10kΩ
Response fMAX
(Figure 8) 5.0 -5.0 70 MHz
(-3dB)
Output Noise
VNOISE A-weighted 5.0 0 6.0 μVRMS
Voltage

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

8
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Typical Test Circuit

LOW HIGH
(From Select Input) (From Select Input)

nYn nZ nYn nZ

A A A

VI=VCC or VEE VO=VEE or VCC VOS (Open

VIS=VEE or VCC
Circuit)

VEE VEE

Figure 5. Test Circuit for Measuring OFF-state Current Figure 6. Test Circuit for Measuring ON-state Current

HIGH
(From Select Input)
V

nYn nZ

VIS=0 to VCC-VEE IIS

VEE

Figure 7. Test Circuit for Measuring RON Figure 8. Test Circuit for Measuring Sine-wave
Distortion and Minimum Frequency Response

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

9
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Typical Test Circuit (Continued)

CIN
RL nYn/nZ nZ/nYn
VIS
Vos

RL CL
Channel
ON GND

CIN
nYn/nZ nZ/nYn (a) Channel ON Condition
VIS Vos

RL dB
Channel CL
OFF
GND
CIN
nYn/nZ nZ/nYn
VIS
Vos

RL RL dB
Channel CL
OFF GND

(b) Channel OFF Condition

Figure 9. Test Circuit for Measuring Switch Figure 10. Test Circuits for Measuring Crosstalk
Off Signal Feed-through Between Any Two Switches/Multiplexers

The crosstalk is defined as follows

(oscilloscope output):

V(p-p)

VCC
VCC VCC
Sn or E Open
VCC VIS
2RL 2RL
RL
nYn/nZ nZ/nYn VI VO
DUT Pulse
Generator DUT
2RL 2RL Oscilloscope
CL RT CL
GND
GND
VEE VEE

Figure 11. Test Circuit for Measuring Crosstalk Figure 12. Test Circuit for Measuring AC
Performance Between Control and Any Switch

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

10
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Typical Performance Characteristics

80 70
VCC=5V,VEE=0V 65 VCC=10V
75
VEE=0V
60
70
55
65
50
RDSON (Ω)

RDSON (Ω)
60 45

40
55
35
50
30
45
25

40 20
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 2 4 6 8 10

Signal Output (V) Signal Output (V)

Figure 13. RDSON vs. Signal Output Figure 14. RDSON vs. Signal Output

10 VCC=10V,VEE=0V
10 VCC=5V,VEE=0V
RL=10kΩ
RL=10kΩ
f=1kHz
f=1kHz
1
THD+N (%)

1
THD+N (%)

0.1

0.1

0.01

0.01
1E-3
0.1 1 0.1 1

Output Voltage Amplitude Output Voltage Amplitude

Figure 15. THD+N vs. Output Voltage Amplitude Figure 16. THD+N vs. Output Voltage Amplitude

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

11
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Typical Performance Characteristics (Continued)

1 20
10 VCC=5V, VEE=0V
0 0 RL=10kΩ

Signal Output Voltage (dBV)

-10 f=1kHz
-20
-1
-30
-40
Gain (dB )

-2 -50
-60
-70
-3
-80
-90
-4 VCC=2.5V, VEE=-2.5V -100

RL=10KΩ -110
-120
-5 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20
1k 10k 100k 1M 10M 100M

Frequency (Hz) Signal Input Voltage (dBV)

Figure 17. Frequency Response Figure 18. Linear Range

20
10 VCC=10V, VEE=0V VCC=5V, VEE=0V
0 RL=10kΩ
Signal Output Voltage (dBV)

-10
f=1kHz
-20
1V/div
VIS

-30
-40
-50
-60
-70
-80
1V/div
VOS

-90
-100
-110
-120
-120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20

Signal Input Voltage (dBV) 10ns/div

Figure 19. Linear Range Figure 20. Propagation Delay

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

12
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Typical Performance Characteristics (Continued)

VCC=5V, VEE=0V -10 VCC=5V, VEE=0V

-20 RL=10kΩ
2Y0 to 1Y0
1V/div

-30
VOS

-40
1Y0 to 2Y0

Crosstalk (dB)
-50
-60
-70
-80
1V/div
VIS

-90
-100
-110
-120
-130
100 1k 10k 100k

10ns/div Frequency (Hz)

Figure 21. Propagation Delay Figure 22. Crosstalk vs. Frequency

0
-10 VCC=10V,VEE=0V
-20 RL=10kΩ
-30 2Y0 to 1Y0 VIS VI
-40 1Y0 to 2Y0
Output 50%
Crosstalk (dB)

-50
-60 GND
-70
tPLH tPHL
-80
VOH
-90
-100 VOS 50%
-110 Output
-120 VOL
-130
-140
100 1k 10k 100k

Frequency (Hz)

Figure 23. Crosstalk vs. Frequency Figure 24. Waveforms Showing the Input (VIS)
to Output (VOS) Propagation Delays

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

13
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Typical Performance Characteristics (Continued)

Figure 25. Waveforms Showing the Turn-on and Turn-off Times

(VM = 50 %, VI = GND to VCC)

Figure 26. Input Pulse Definitions

tr and tf
Amplitude VM Fmax Pulse
Other
Width
VCC 50% < 2ns 6ns

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

14
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Typical Application

Figure 27. Typical Application of AZ4052

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

15
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Mechanical Dimensions

SOIC-16 Unit: mm(inch)

1.350(0.053)
1.750(0.069) 1.250(0.049)
7° 1.650(0.065)
0.330(0.013)
0.510(0.020) 7° A
20:1
B 0.250(0.010) 0.400(0.016)
1.270(0.050)
10.200(0.402)
9.800(0.386)

0°
8°
1.270(0.050)

R0.200(0.008)
BSC

R0.200(0.008)

0.200(0.008)
5.800(0.228) 0.050(0.002) 0.250(0.010)
6.240(0.246)
0.170(0.007)

0.250(0.010)
0.250(0.010)

C-C
3.800(0.150) 50:1
4.040(0.159) 8° B
9.5 20:1
°
1.000(0.039)

C
0.200(0.008)
3° Sφ1.000(0.039)
7° 8° Depth 0.200(0.008)
A
C
8° 0.400(0.016)×45°

Note: Eject hole, oriented hole and mold mark is optional.

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

16
 Preliminary Datasheet

Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052

Mechanical Dimensions (Continued)

DIP-16 Unit: mm(inch)

Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

17
 BCD Semiconductor Manufacturing Limited

http://www.bcdsemi.com

IMPORTANT NOTICE
IMPORTANT NOTICE

BCD Semiconductor
BCD Semiconductor Manufacturing
Manufacturing Limited
Limited reserves
reserves the
the right
right to
to make
make changes
changes without
without further
further notice
notice to
to any
any products
products oror specifi-
specifi-
cations herein.
cations herein. BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited does
does not
not assume
assume any
any responsibility
responsibility for
for use
use of
of any
any its
its products
products for
for any
any
particular purpose,
particular purpose, nor
nor does
does BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited assume
assume any
any liability
liability arising
arising out
out of
of the
the application
application or
or use
use
of any
of any its
its products
products or
or circuits.
circuits. BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited does
does not
not convey
convey anyany license
license under
under its
its patent
patent rights
rights or
or
other rights
other rights nor
nor the
the rights
rights of
of others.
others.

MAIN SITE
MAIN SITE
- Headquarters
BCD Semiconductor Manufacturing Limited - Wafer
BCD FabSemiconductor Manufacturing Limited
BCD Semiconductor
- Wafer Fab Manufacturing Limited Shanghai SIM-BCD
- IC Design GroupSemiconductor Manufacturing Co., Ltd.
No. 1600, Zi
Shanghai Xing Road,
SIM-BCD Shanghai ZiZhu
Semiconductor Science-basedLimited
Manufacturing Industrial Park, 200241, China 800 Yi Shan Road,
Advanced Shanghai
Analog 200233,
Circuits China Corporation
(Shanghai)
Tel:
800,+86-21-24162266, Fax: +86-21-24162277
Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491,YiFax:
8F, Zone B, 900, Shan+86-21-5450 0008200233, China
Road, Shanghai
Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 Tel: +86-21-6495 9539, Fax: +86-21-6485 9673
REGIONAL SALES OFFICE
Shenzhen OfficeSALES OFFICE
REGIONAL Taiwan Office USA Office
Shanghai
Shenzhen SIM-BCD
Office Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan
Semiconductor
Office (Taiwan) Company Limited BCD Office
USA Semiconductor Corp.
Unit A Room
Shanghai 1203, Skyworth
SIM-BCD Bldg., Gaoxin
Semiconductor Ave.1.S., Nanshan
Manufacturing Co., Ltd.District,
Shenzhen Shenzhen,
Office 4F, 298-1,
BCDRui Guang Road,(Taiwan)
Semiconductor Nei-Hu District,
Company Taipei,
Limited 30920Semiconductor
BCD Huntwood Ave.Corporation
Hayward,
China
Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office Taiwan4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, CA 94544,
30920 USA Ave. Hayward,
Huntwood
Tel:
Room +86-755-8826
E, 5F, Noble 7951 Tel: +886-2-2656
Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan 2808 Tel :94544,
CA +1-510-324-2988
U.S.A
Fax: +86-755-88267951
Tel: +86-755-8826 7865 Fax: +886-2-2656 28062808
Tel: +886-2-2656 Fax:: +1-510-324-2988
Tel +1-510-324-2788
Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 Fax: +1-510-324-2788