1

2
DIGITAL FORCE GAUGES
High Performance Model Digital Force Gauge
ZT Feature:
• High sampling rate (Max.2000 data / sec.) : Captures force value more precisely.
• Clear high brightness display (Organic EL)
• Multi display function: you can customize the display
• Save continuous data in USB memory stick. [ZTA only] (USB memory stick is not included.)
Model Range Display Resolution Thread
ZTA-2N ZTS-2N 2N (200gf) 2.000N/2000mN (200.0gf) 0.001N/1mN (0.1gf)
ZTA-5N ZTS-5N 5N (500gf) 5.000N/5000mN (500.0gf) 0.001N/1mN (0.1gf)
ZTA-20N ZTS-20N 20N (2kgf) 20.00N (2.000kgf) 0.01N (0.001kgf)
ZTA-50N ZTS-50N 50N (5kgf) 50.00N (5.000kgf) 0.01N (0.001kgf)
M6
ZTA-100N ZTS-100N 100N (10kgf) 100.0N (10.00kgf) 0.1N (0.01kgf)
ZTA-200N ZTS-200N 200N (20kgf) 200.0N (20.00kgf) 0.1N (0.01kgf)
ZTA-500N ZTS-500N 500N (50kgf) 500.0N (50.00kgf) 0.1N (0.01kgf)
ZTA-1000N ZTS-1000N 1000N (100kgf) 1000N/1.000kN (100.0kgf) 1N/0.001kN (0.1kgf)

High Capacity Standard Model

ZT
Feature:
• Available in capacity up to 5000N (500Kgf) .
• High sampling rate (Max.2000 data / sec.) : Captures force value more precisely.
• Clear high brightness display (Organic EL)
• Multi display function: you can customize the display.
• Save continuous data in USB memory stick. [ZTA only] (USB memory stick is not included.)
• Indicates displacement. [ZTA only] (Necessary to be combined with test stand having linear scale.)
• Indicates 2 peak values (2 steps) . [ZTA only] (Ideal for measuring switch’s peak of the point of contact)
• Please combine the force gauge with a test stand to improve test-repeatability.
Model Range Display Resolution Thread
ZTA-2500N ZTS-2500N 2500N (250kgf) 2500N/2.500kN (250.0kgf) 1N/0.001kN (0.1kgf)
M10
ZTA-5000N ZTS-5000N 5000N (500kgf) 5000N/5.000kN (500.0kgf) 1N/0.001kN (0.1kgf)

Popular Model Feature:

DS2 • Simple function and low cost.

• Ideal for hand-use force measurement due to easy-grip design.
• Combining the force gauge with a test stand, you can use the unit as a simple testing machine.
• Able to draw a force-time graph with an optional software.
Model Capacity Display Resolution Measuring Shaft
DS2-2N 2N(200gf) 2.000N(200.0gf) 0.001N(0.1gf)
DS2-5N 5N(500gf) 5.000N(500.0gf) 0.001N(0.1gf)
DS2-20N 20N(2kgf) 20.00N(2.000kgf) 0.01N(0.001kgf)
DS2-50N 50N(5kgf) 50.00N(5.000kgf) 0.01N(0.001kgf)
M6
DS2-100N 100N(10kgf) 100.0N(10.00kgf) 0.1N(0.01kgf)
DS2-200N 200N(20kgf) 200.0N(20.00kgf) 0.1N(0.01kgf)
DS2-500N 500N(50kgf) 500.0N(50.00kgf) 0.1N(0.01kgf)
DS2-1000N 1000N(100kgf) 1000N(100.0kgf) 1N(0.01kgf)

Separate Sensor Model Digital Force Gauge

ZT ZTA-DPU-2N
Model
ZTS-DPU-2N
Capacity
2N (200gf)
Display
2.000N(2000mN)
Resolution
0.001N(1mN)
ZTA-DPU-5N ZTS-DPU-5N 5N (500gf) 5.000N(5000mN) 0.001N(1mN)
ZTA-DPU-10N ZTS-DPU-10N 10N (1kgf) 10.00N 0.01N
ZTA-DPU-20N ZTS-DPU-20N 20N (2kgf) 20.00N 0.01N
ZTA-DPU-50N ZTS-DPU-50N 50N (5kgf) 50.00N 0.01N
ZTA-DPU-100N ZTS-DPU-100N 100N (10kgf) 100.0N 0.1N
ZTA-DPU-200N ZTS-DPU-200N 200N (20kgf) 200.0N 0.1N
ZTA-DPU-500N ZTS-DPU-500N 500N (50kgf) 500.0N 0.1N
ZTA-DPU-1000N ZTS-DPU-1000N 1000N (100kgf) 1000N(1.000kN) 1N(0.001kN)
ZTA-DPU-2000N ZTS-DPU-2000N 2000N (200kgf) 2000N(2.000kN) 1N(0.001kN)
ZTA-DPU-5000N ZTS-DPU-5000N 5000N (500kgf) 5000N(5.000kN) 1N(0.001kN)
ZTA-DPU-10kN ZTS-DPU-10kN 10kN (1000kgf) 10.00kN 0.01kN
ZTA-DPU-20kN ZTS-DPU-20kN 20kN (2000kgf) 20.00kN 0.01kN

Force Recorder
Software analysis for ZT series
Application:

3
 MECHANICAL FORCE GAUGES
Popular Model
FB/FS
Application:
• Measure the contact pressure of touch panel or keyboard
• Measure the of the bonding strength of adhesive tapes and the peel strength
of adhesive sheets
Model Capacity Resolution
FB-10N 10N 0.1N
FB-20N 20N 0.2N
FB-30N 30N 0.25N
FB-50N 50N 0.5N
FB-100N 100N 1N
FB-200N 200N 2N
FB-300N 300N 3N
FB-500N 500N 5N
FS-1K 1kgf 10gf
FS-2K 2kgf 20gf
FS-3K 3kgf 25gf
FB-5K 5kgf 50gf
FB-10K 10kgf 100gf
FB-20K 20kgf 200gf
FB-30K 30kgf 250gf
FB-50K 50kgf 500gf
FB-5lb 5lbf 0.05lb
Spesification
FB-10lb 10lbf 0.1lb
FB-20lb 20lbf 0.2lb
Test
FB-30lb 30lbf 0.25lb Accuracy Att. Thread
Direction
Division Peak Hold
FB-50lb 50lbf 0.5lb
FB-100lb 100lbf 1lb ±0.3%F.S. 6/8 M6 / M10 Push / Pul l 100 lines / 200 lines Yes / No

Push-Pull Scale High Capacity Standard Model

PS PSH
IMADA mechanical force gauge can accurately • Extra strong bodys supports high load range withst reliability
measure tensile/compressive force without • Cover the measurements of high force beetwen 500N ~ 3000N
power supply.
• Extra strong bodys supports high load range Application:
with reliability • Strength test for various materials
(tension test, compression test, shearing test,etc)
• Measuring of attraction/repulsion froce of solendid or magnet
• Adhesion test of laminated tubes

Specification:
• Stroke : 10mm
• Graduation : 100lines (120lines for 3000N, 300K, 300lb)
• Power supply needless • Measurement mode :Track and peak mode (selectable)
• Durable and high reliability • Accesory : Attachment 6pcs, 2 exclusive handles, 4 instalation bolts,
• Force transition is readable carrying case
• operational manual, inspection certificate
• Environment : 0-+40˚C
• Weight : Approx. 2.8kg(PSH-2000N)*differfrom model numbers
• Dimension : W95 x D63.5 x H 290mm
Spesification note: available model capacity in Kg force & Lbs

Test
Accuracy Att. Thread Division Peak Hold
Direction

±0.1%F.S. 6/8 M6 / M10 Push / Pul l 100 lines / 200 lines Yes / No

Model Capacity Resolution Thread

PS-5N 5N 0.05N
PS-10N 10N 0.1N
PS-20N 20N 0.2N
PS-30N 30N 0.25N
Spesification
PS-50N 50N 0.5N M6
PS-100N 100N 1N
Test
PS-200N 200N 2N Accuracy Att. Thread Division Peak Hold
Direction
PS-300N 300N 2.5N
PS-500N 200N 5N ±0.3%F.S. 6/8 M6 / M10 Push / Pul l 100 lines / 200 lines Yes / No

4
MOTORIZED AND MANUAL TEST STAND
Automatic/Manual Operation Automatic/Manual Operation
MX-500N MX2-1000N
Application: supporting device for Imada force gauge Application: supporting device for Imada force gauge

Standard Function: Standard Function:

• Single/continuous cycle function • Single/continuous cycle function
• Fix speed/adjustable speed mode select • Fix speed/adjustable speed mode select
• Overload brake (work with Z series) • Overload brake (work with Z series)
• Force control mode (work with Z series) • Force control mode (work with Z series)

Specification: Specification:
• Safety feature: Upper/lower limit, emergency button • Safety feature : Stroke limit, emergency stop button
• Speed: 10 ~ 300 mm/min non step adjustable • Speed : 8 ~ 240 mm/min non step adjustable
• Dimension (WxDxH): 214 x 428 x 574 mm • Dimension (WxDxH) : 263 x 368 x 903 mm
• Power supply: AC 100 ~ 240V • Power supply : AC100V-240V, free input
• Capacity: 500N (50kgf) • Capacity : 1000N (100kgf)
• Weight: approx. 18 kg • Weight : approx. 19kg
• Stroke: 288 mm • Stroke : 310mm

Optional Function: Optional Function:

• Speed/length meter (-E) • Manual mode
• Timer unit (-TM) • JOG mode
• Digimatic length meter (-S) • Cycle mode
• Extended stroke (-L550) • Digital setting of speed
• Another speed range • Counter
*force gauge are sold separately • Timer *force gauge are sold separately

Automatic/Manual Operation
MH-1000N
Application: supporting device for Imada force gauge

Standard Function:
• Single/continuous cycle function
• Fix speed/adjustable speed mode select
• Overload brake (work with Z series)
• Force control mode (work with Z series)

Application:
• Safety feature: Upper/lower limit, emergency button
• Speed: 10 ~ 300 mm/min non step adjustable
• Dimension (WxDxH): 214 x 428 x 574 mm

*force gauge are sold separately

Manual Operation Wire Harness Tester

HV-500N II LH-500N
Application: supporting device for Imada force gauge Application: supporting device for Imada force gauge

Standard Function: Standard Function:

• Capacity : 500N (50kgf) • Exclusive for the tensile strength test of crimped terminal.
• Stroke : 288 mm • High work efficacy due to simple operation, and easy sample setting.
• 2mm/one complete turn of hand wheel • Attachments to clamp samples easily and firmly are included.
• With screw stopper
• Weight : Approx. 10 kg Specification:
• Dimension (WxDxH) 327 x 309 x 598 cm • Capacity : 500N(50kgf)
• Stroke : 8mm
Optional Function: • Dimension (WxDxH) : 450 x 120 x 182 mm
• Digimatic length meter (-S) • Weight : approx. 10.5kg
• Extended stroke (-L550)

*force gauge are sold separately *force gauge are sold separately

5
 STANDARD / OPTIONAL ATTACHMENTS
Attachment for Compression Test Attachment for Compression Test
Disc Compression Jig
PC-5040/5060/5100 PR-2500 N

Burst strength test of tube

Compression test of plastic bottle PC Series Model PR-2500 N

Capacity 2500N(250kgf)
Model PC-5040 PC-5060 PC-5100 Dimensions (W x D x H) 280 x 140 x 159mm
Capacity 5000N(500kgf) Allowable sample size 200 x 140 x 105mm
Outer diameter Ø 40mm Ø 60mm Ø 100mm Force gauges that can be
Weight Approx. 160g Approx. 330g Approx. 820g Z series 2000N/5000N
combined
Screw M10 Weight Total: approx. 6.3kg, Upper: approx. 3.1kg
Screw M10

Attachment for Tension Test

Flat Chuck Film Grips
GC-1100/1200/5000 FC-21/20/40/21U/41U/21UQ

Extraction test of connector GC 1100 180° peel strength test

Model FC-20 FC-40 FC-21 FC-21U FC-41U FC-21UQ

Capacity 500N(50kgf) 250N(25kgf)
Model GC-1100 GC-1200 GC-5000
Jaw Face Width 20mm 40mm 20mm 20mm 40mm 20mm
Capacity 1000N(100kgf) 5000N(500kgf)
Max.
Jaw Face Width 20mm 29mm Opening Width Max. 2mm
1mm
Opening Width Max. 10mm Max. 20mm Max. 30mm Approx. Approx. Approx. Approx. Approx. Approx.
Weight
Weight Approx. 160g Approx. 170g Approx. 1400g 25g 125g 73g 40g 70g 50g
Screw M6 Screw M6

Wedge Grips, Pantograph Grips Slide Table for 90˚ Adhesion Test
KC-100/1001/5000, PGC-0510 P90-200N

PGC-0510

KC-1001
Electric wire strength test KC-100 PGC-AD6

Model KC-100 KC-1001 KC-5000 PGC-0510

500N 1000N 5000N 500N
Model P90-200N
Capacity
(50kgf) (50kgf) (500kgf) (50kgf) Capacity 200N(20kgf)
Opening Width Max. 10mm Max. 2mm Max, 5mm Max, 15mm Sample Length Max. 155mm
Weight Approx. 330g Approx. 95g Approx. 565g Approx. 110g Sample Width Max. 80mm
Screw M6 M10 Hook formull Weight Approx. 3kg

6
STANDARD / OPTIONAL ATTACHMENTS
Bend Test Stand Penetrating Pin Gauges
GA-10N/5000N PG-2/3/4/5

Model PG-2 PG-3 PG-4 PG-5

Model GA-10N-Normal GA-5000N-High Capacity Rod Diameter 2mm 3mm 4mm 5mm
Capacity 500N(50kgf) 5000N(500kgf) Capacity 100N 200N
Mounting Screws M6P1 M10P1.5 Mounting Screw M6P1
Weight(upper) 100g 120g Length 20mm
Weight(bottom) 4100g 4200g Weight 2g 3g 4g 5g
Dimension Recommended
(W1xH1xD1) 11.5x49x60mm 16.5x50x60mm PS/FB/DPS/DPX/DPZ series 2.4N to 500N
Force Gauge
(W2xH2xD2) 150x74x100mm 150x69x100mm
Opening width
5-60mm 5-70mm Coefficient of Friction Tester
COF-10N
[A]
PS/FB/DPS/DPX/DPZ PSH/DPSH/DPZH
With Force Gauge
20N-500N 20N-2000N

SQ-5030/5075/5150

Model COF-10N
Model SQ-5030 SQ-5075 SQ-5150 Capacity 10N(1kgf)
Capacity 5000N(500kgf) Sample Length Max. 1.5mm
Plate Size 30x20mm 75x50mm 150x100mm Sample Width Max. 150mm
Weight Approx. 65g Approx. 500g Approx. 1560g Weight Approx. 2.7kg
Screw M10 Accessories Measurment sofware Force-Recorder-COF

FOOD RHEOLOGY TESTER (TEXTURE ANALYZER)

FRT-50N Standard Function:
• Food rheology tester to analyze textures such as stiffness, viscosity, elasticity,
and so on.
• Ideal for packaging strength test such as film sticking test, push out test of
medicine tablet.
• Ideal for R&D and production section since it is space-saving size and
portable.
• Simple button operation, easy operation programming.
• Easy hygiene maintenance since it is designed to take off tables, also make
for wipe-off.
• With an included software, the transition of load can be drawn into a graph,
and 5 graphs at maximum can be drawn in a table, which is useful for
comparing and evaluating the graph data.
Model FRT-50N
Capacity 50N(5kgf)
Accuracy +/-0.2% F.S. +/-1 digit
Movable Range
Approx.100mm
of the Table
Deflection at
0.2mm or less (The body and a load cell)
Maximum Force
Weight Approx.11kg
Test Speed 0.1 to 10mm/sec
Power AC100 to 240V free input
Operating
0 to +40 degree Celcius (No condensation)
Temperature
Power cable, Instruction manual, Inspection
Accessory
certificateeport, Driver CD-ROM, USB cable, ZP-Recorder
(1 pc for each)
(Graph drawing software), 4 kinds of probes

7
 DIGITAL TORQUE GAUGES
Automatic Screw-cap Tester
Model MTG
MTG Unit N-m or N-cm
Feature: 4 digits LCD with sign, unit, mode, warning LED
• Ideal for screw cap torque test. Display Comparator
• High reproducibility torque measurement due to automatic operation. 16 letters x 2 rows
• Able to control operation at set point , do repetition and durability test. Measuring Speed 3~90 degrees/sec
• Able to measure twist force of plate shaped samples. Display Update 10 times/sec
Approx. 150% of the max range. (LED blinks and buzzer
Capacity
works when the torque exceeds 110% of the range)
Sampling Speed 1000 times/sec
Sample Diameter Cap Diameter 20~90mm
Table Diameter 20~180mm
Height of Sample
80~240mm
Accuracy -0.5%~+0.5% Full Scale., -1~+1 digit
Condition 0~+40 degrees Celsius, 20~80 %RH
Power AC100V~240V Free input
Output USB, Serial(RS232C), Analog (Approx. -2~+2V)
External Input
Zero Clear, Peak/ Track changeable, Memory/Data output
Terminal
Turns to one way, stops by stop
Normal
button.
Stops when the torque exceeds the
NG Stop set value
Mode
with comparator function.
Repeats the operation with
Endurance Test comparator function.
(It counts the operation.)
Weight Approx. 17kg

Hand Held Torque Gauge Manual Screw-cap Tester

HTGS/HTGA DTX2 series
For torque of screws or torsion strength measurement
• Accuracy: ±0.5% F.S. ±1digit Display 4 digit LCD • Ideal for screw cap torque test of bottles for beverages or medicines.
• Measuring units: N-m, N-cm, Kgf-m, Kgf-cm, lbf in selectable • Multifunction: Peak hold function, comparator evaluation and more.
• Function HTGA: 1st/2nd peak,Angle detection at torque peak value, • 2 types of power supply available: 100 to 240 VAC, or NiMH
Sub comparator 2 steps (output of large or small judgment), USB flash drive rechargeable battery and AC adapter.
• Sampling Rate: 1000 times per second or more • Option: USB connection type is available with additional charge.
• Overload capacity: 150% of F.S. (overload warning 110% of F.S. and alarm)
• Weight Sensor = Approx. 490g
• Included : AC adapter, carrying case, Instruction manual, inspection certificate

Model Capacity Display Resolution

2N-m 2.000N-m 0.001N-m
DTX2-2N-A(B)
(200gf-m) (200.0gf-m) (0.1gf-m)
5N-m 5.000N-m 0.001N-m
DTX2-5N-A(B)
(500gf-m) (500.0gf-m) (0.1gf-m)
10N-m 10.00N-m 0.01N-m
Model Capacity Display Resolution DTX2-10N-A(B)
(1.000kgf-m) (1.000kgf-m) (0.001kgf-m)
HTGA-2N 2N-m 2.000N-m 0.001N-m
200N-cm 200.0N-cm 0.1N-cm
HTGS-2N (200N-cm) (200.0N-cm) (0.1N-cm) DTX2-200Nc-A(B)
(20.00kgf-cm) (20.00kgf-cm) (0.01kgf-cm)
HTGA-5N 5N-m 5.000N-m 0.001N-m 500N-cm(50.00kgf- 500.0N-cm(50.00kgf- 0.1N-cm
HTGS-5N (500N-cm) (500.0N-cm) (0.1N-cm) DTX2-500Nc-A(B)
cm) cm) (0.01kgf-cm)
HTGA-10N 10N-m 10.00N-m 0.01N-m DTX2-1000Nc- 1000N-cm 1000N-cm 1N-cm
HTGS-10N (1.000N-cm) (1.000N-cm) (0.001N-cm) A(B) (100.0kgf-cm) (100.0kgf-cm) (0.1kgf-cm)

8
UNIVERSAL TESTING MACHINE
Servo Control System
Universal Testing Machine
Series of Gotech tensile strength testers are widely applied to determine elongation, compression, flexing, tear peeling, shear force,
etc. of finished or semifinished products such as rubber, plastic, footwear, leathers, metal, wire, paper, timber, etc.

AI-7000 S AI-7000 M AI-7000 LA

C-1T
Type: Compression platens
Max. load: 1000kg

RB-3
Type: Webbing grips
Max. load: 300kg

Model AI-7000 S AI-7000 M

Capacity (optional) 100, 200, 500N; 1, 2, 5kN 10, 20kN
Unit (switchable) kgf, lbf, N, kN, kPa, MPa
Load resolution 1/200,000 (or 1/300,000 specified)
Load accuracy ± 0.25%

FA-1
Load range Rangeless (full scales at the same amplification)
Stroke (exclude the grips) 1100mm
Effective width 410mm Type: Pliers grips
Max. load: 300kg
Test speed 0.0001~1000mm/min selectable
Speed accuracy ± 0.5%
Stroke resolution 0.00004mm
Sample rate 200 times/sec
Communication interface USB
Motor AC Servo Motor
Main unit
Dimension 75 x 70 x 236 cm
(height exclusive of footpad)
(WxDxH)
Computer/Desk 100 x 60 x 118 cm
Load range Main unit (exclude the grips)
(approx.) Computer/Desk
152Kg
60Kg
180Kg (Exclude the grips)
AM-500
Type: Pneumatic
Power 1ph, 220v, 15A or speciafied by user bi-direction
plane grips
AI-7000 AI-7000 AI-7000 AI-7000 AI-7000 AI-7000 Max. load: 500kg
Model
LA5 LA10 LA20 LA30 LA50 LA100
Capacity (optional) 50kN 100kN 200kN 300kN 500kN 1000kN
Unit (switchable) kgf, lbf, N, kN, kPa, Mpa
Load resolution 1/200,000 1/300,000 (or specified by user)
Load accuracy ±0.1%, ±0.5% (capacity of load cell is 1/250 above)
Load range Rangeless (full scales at the same amplification)
Stroke (exclude the grips) 1050mm 1280mm
Effective width 570mm 730mm

Test speed 0.001~500 mm/min Selectable

0.001~250 mm/min
Selectable
0.001~200
mm/min
Selectable
MB-500
Type: Wedge grips
Speed accuracy ±0.5% Max. load: 500kg
Stroke resolution 0.00003 mm
Sample rate 200 times/sec (or 500 times/sec)
Communication interface USB 2.0
Motor AC servo motor
Main unit
Dimension 114 x 70 x 210cm 126 x 80 x 220cm 126 x 85 x 250cm 128 x 90 x 275cm 142 x 110 x 320cm
(height exclusive of footpad)
(WxDxH)
Computer/Desk 165 x 65 x 80 cm
1050kg 1230kg 1750kg 2500kg
Load range Main unit (exclude the grips) 717kg (exclude the grips) (exclude the grips) (exclude the grips) (exclude the grips) (exclude the grips)
(approx.)
Computer/Desk 102 kg
3 , 220V, 25A / 3 , 380V, 20A
B-500
Power 3 , 220V, 20A / 3 , 380V, 15A (or specified by user) Type: Bending fixture
(or specified by user) Max. load: 500kg

9
 UNIVERSAL TESTING MACHINE
Computer System
Universal Testing Machine
GT-7001-LC
Measure tension,compression,bend,shear,
tear and non metallic-hardness, etc.

• GT-U33 Extensometer

• Tensile Test

• GT-U35 Hyd Clamp Eq.

• Compression Test • Force-elongation Curve

• Bending Test • Strength-Time Curve

• Transverse Test • Multi Curve

Model GT-7001-LC 200 GT-7001-LC 100 GT-7001-LC 50 GT-7001-LC 30 GT-7001-LC 20 GT-7001-LC 10

Capacity 2000kN 1000kN 500kN 300kN 200kN 100kN
Speed (without loading) 0~65mm/min 0~70mm/min 0~70mm/min 0~90mm/min
Display method By Computer
Load range Rangless (full scales at the same amplification)
Resolution 1/200,000 (or 1/300,000 specified)
Accuracy ±1%
Driving method Hydraulic system
Max. space 620mm 610mm 490mm 460mm
Tensile Grips for rod (rod dia.) ø12~ø85mm ø13~ø75mm ø12~ø50mm ø10~ø40mm
Grips for plate 85 x 110mm 70 x 90mm 50 x 80mm 40 x 60mm
Compres- Effective space 700mm 650mm 540mm
sion Diameter of compression plate ø200mm ø160mm ø120mm ø100mm
Effective space 245mm 225mm 290mm 280mm
Max. space
Bending between two 790mm 340mm 390mm
(Optional) Bending jig fulcrums
Fulcrum size
ø30 x 210mm ø30 x 145mm
(dia x width)
Transverse Radius of punch R 35mm R 22mm R 22mm R 16mm
Punch
(Optional) Punch width 200mm 160mm 120mm 100mm
Ram stroke 230mm 220mm 200mm
Effective space between two columns 730mm 650mm 495mm 500mm
Crosshead speed (up/down) (approx.) 170mm/min 200mm/min 250mm/min 300mm/min
Dimension Main body 160 x 110 x 300cm 140 x 80 x 232cm 110 x 73 x 205cm 100 x 70 x 181cm
(W x D x H) Control box 113 x 69 x 140cm
Weight Main body 7715kg 3250kg 2450kg 1270kg
(approx.) Control box 255kg
3ph/220V/30A; 3ph/220V/20A; 3ph/220V/13A;
Power
3ph/380V/20A 3ph/380V/14A 3ph/380V/10A

10
UNIVERSAL TESTING MACHINE
Computer System Micro-Computer
Concrete Compression Tester Tensile Strength Tester
GT-7001-BC GT-7010-D2EP
For concrete, cement blocks, various bricks, Measure tensile strength for various
etc to test their bending and pressure resistant strength materilas such as wire, rope, yarn,
cable, etc.
Equipped with compact printer to
print test values, etc

Model GT-7010-D2EP
Capacity (optional) 100, 200, 500N; 1, 2, 5kN
Unit (switchable) kgf, gf, Ton, lbf, N,kN, or by user’s definition
Model GT-7001-BC Load resolution 1/50,000 (U25)
Capacity (optional) 2000kN 500kN Load accuracy ±0.5%
Standar device Computer system Stroke (exclude the grips) 1100mm
Load range Full scales at the same applications Method of speed input Knob
Resolution 1/200,000 (or 1/300,000 specified) Test speed 5~500mm/min adjustable
Test space (H x D) 340 x 350mm 340 x 270mm Stroke resolution stroke: 0.00125mm / extensometer: 0.025mm
Upper die diameter ø165mm Simple rate 16 times/sec
Hydraulic stroke 50mm print able, display elongation value, test values, max.value
Indicator
& break value
Pressure speed 1~35mm/min
Motor AC servo motor
Dimension Main unit 44 x 55 x 127cm 38 x 40 x 110cm
Dimension (W x D x H) 55 x 35 x 186cm
(W x D x H) Control unit 112 x 74 x 158cm
Weight 98kg
Power 3ph/220V/20A 3ph/220V/12A
Power 1PH, 220V, 5A or specified by user 50HZ/60HZ

Charpy Digital Impact Tester Charpy Impact Tester

GT-7052-D30 GT-7052
It is used for determining the energy absorbed by a specimen of various It measures the energies absorbed by the specimens of various metallic
metallic materials after being impacted by a specified weight at a given angle materials after impacting at a specified angle and defined weight so as to
so that you may estimate the toughness of various metallic materials. It will determine their toughness.
calculate the impact energy of tested material by use of precise encoder and
microcomputer.

Model GT-7052-D30
Items Specification
Method Charpy Model GT-7052
Capacity 30kg-m Capacity 30kg-m 50kg-m
Drop angle 1040 Swing angle 1460 1400
Distance from striker’s Min. graduation 10
edge 85cm
to shaft center Hammer weight 30kg (approx.)
Impact speed 5.42m/s Impact speed 5.18m/sec 5.42m/sec
Gap of specimen support 40mm Impact center length 750 ± 5mm
Radius of specimen Shaft center height 1100mm
1~1.5mm
support’s tip Dimension (W x D x H) 142 x 60 128cm
Radius of striker’s edge 2~2.5mm Weight 300kg 350kg
Arc of striker’s edge 300 Specimen JIS No.3, No.4, No.5

11
 TESTING MACHINE FOR RUBBERS & TIRES
Moving Die Rheometer (MDR) Model M3000

M-3000 Standard ASTM-D5289, ISO-6502, GB-T/16584

Room temp. -2000C
M-000 Die Rheometer (rotorless cure meter) is used Temp. control Control by computer & PID SSR range: nromal
for the measurement of selected vulcanization temp. -2000C
characteristics of rubber compound Temp. accuracy Temp. error ±0.30C
Temp. sensor class A class
Temp. minimun reading 0.10C
Heating time 300C to 1900C < 8
Oscillation frequency 100cpm, driven by DC motor
Elasricity S’-1~200 lb-in
Torque range Viscosity S”-0.3~200 lb-in
Selectable by auto switching or manual setting
Minimum reading of
0.001 unit
torque and pressure
±0.50, ±10, ±20, ±30
Oscillation amplitude
( select one angle when placing order)
Time range No time limit
Power 1§, 220V ±10%, 10A
Air pressure 4.6kg/cm2 (0.46MPA) prepared by customer
Dimension (W x D x H) 66 x 66 x124cm (main unit)
Weight 399kg

Mooney Viscometer (MV)

MV-3000 Model MV3000 MV3000VS
MV-3000 Is an upgraded model of traditional Mooney Temp. control Controlled by computer&PID.SSR Room temp ~2000C
Viscometer. Adopting a new microprocessor and LCD Grade of temp. sensor Class A
touch screen with built-in automatic balance and
Temp. precision Tmp.Tolerance 0.30C, Min.reading of temp 0.10C
calibration device.
Heating rate 30 ~1000C < 5’
Temp. returning time Retrieve temp. to 1000 < 60s
Rotor speed 2±0.02rpm 0.1~30rpm
Mooney viscosity range 1-250 Mooney units (auto or manual range. Selectable area in software)
Torque unit kg-cm, lb-in, N-m, dN-m, mooney
Min. torque reading 0.001 unit
Mooney Viscosity 3 different speeds can
Mooney Viscosity
be set for each test.
Function Mooney Scorch
Mooney Scorch
Stress Relaxation
Stress Relaxation
Test time duration No time limit
Rotor size Large (L), Small (S)
Pressure 3.6kg/cm2 (0.36Mpa) Prepared by user
Dimension (W D H) 70 x 81 x 130 cm
Weight (approx.) 220kg
Power 1 ,AC 220V 10%, 50/60Hz, 10A ( Specified by user)

Carbon Black Dispersion Tester Oil Bath

GT-505-CBD GT-7040-L
ISO-11345

This analyzer is designed for the purpose of observing the dispersed situation
of the carbon black in a mixing compound rubber.
Model GT-505-CBD
Maginification of This oil bath is specialy designed for testing the oil resitance of various
100 materials, and the length change of plastic such as PE and PVC tested at the
microscope
Irradiation angle 300 oil temperature.
Specimen hole size 4.0 x 3.5mm Model GT-7040-L
Control method Professional program Temp. room temp. ~3000C
Dispersion grade 0.1~10 Test cup 6 sets
Light source Halogen lamp Mixed motor 40W
Dimension (W x D x H) 20 x 50 x 48cm Interior 20 x 18 x 30.5cm
Weight 23kg Dimension (W x D x H) 54 x 38 x 55cm
Power 1ph, 220V, 2A Weight 23kg
Accessories Cutter Power 1ph, 220V, 2A

12
TESTING MACHINE FOR RUBBERS & TIRES
Aging Oven Ozone Tester
GT-7017 OZ-0500
It’s to accelerate the deterioration
This tester is designed to provide
of vulcanized rubber and plastic
an auto-controlled ozone
for figuring the changing rate of
concentration environment for
pulling and elongation before/
determining the ozone resistance
after heating.
performance of rubber. It adopts
the ultraviolet rays absorption
principle to design the monitor
and bases on the Bill-Brown
Law to inspect the ozone
concentration automatically
with chemical free.
Model GT-7017-EM GT-7017-EL
Temp. range Room Temp. +10~ Model OZ-0500
Temp. control Digital temperature controller Ozone monitor Ultraviolet ray absorption

1000C within < ± 10C, 100-2000C within < ± 20C, 200-3000C Ozone range 0 ~ 1000pphm
Temp. deviation
within < ± 30C Accuracy 2% F.S
Temp. fluctuation ±0.50C Temp. range 20 ~ 900C
Temp. uniformity ±1%F.S Temp. accuracy ± 900C
Timer LED 0~9999(H, M, S switcable) Ozone generator Ultraviolet rays
Turntable speed 5~10rpm Display device Digital type, instant monitor
Viewing window 25W tempered glass and 25W lamp Interior (W x D x H) 50 x 50 x 60cm
Heater power 3.5Kw Dimension (W x D x H) 125 x 70 x 180cm
Interior (W x D x H) 40 x 40 x 45cm 50 x 50 x 60cm Power 1ph, AC 220V, 15A
Dimension (W x D x H) 61 x 74 x 131cm 71 x 74 x 146cm Accessories Static/Dynamic grips: 6 sets (optional)
Power 1ph, AC 220Vac, 50HZ, 4Kw
Accessories 2 screens, 20 clips, 1 lamp and 2 turntables Sample Buffing Machine

Cutter Press GT-7016-A GT-7016

GT-7015
GT-7016 This machine will be able to
grind the surface of the material
UL-1581, ASTM-D412 and get the required thickness
This machine is used to of material for testing.
cut specimens of various
specifications for testing.
*) excluding the cutter
Model GT-7015
Refrenced standard UL158
Area of test table 300x67mm
Horizontal stroke 0-210mm
Model GT-7016-A GT-7016 Vertical stroke 0-29mm
Dimension (W x D x H) 20 x 70 x 80cm Ø 41 x 72cm Level stroke 0-18mm
Weight 47kg 62kg Spec. of grinding wheel 60#, ф6”x40mm
Dimension (W x D x H) 53 x 56 x 31cm
Compression and Deformation Tester Weight (approx.) 60kg

GT-7049 Power 1§, AC220V, 50/60Hz, 3A (specified by user)

ASTM-D395, GB/T 7759 Discoloration Meter

It’s used especially to test
the static compression for GT-7035-NUA
rubber ASTM-D1148, HG/T3689

Model GT-7049
Rubber Ø 28.68, 12.7mm (D) GT-7035-UA simulates the
Specimen circumstances of sunshine
Foam plastic 50 x 50 x 25mm(LxWxD)
Dimension (W x D x H) 20 x 12 x 10cm
radiation to test the resistance to
discoloration of shoes materials
Weight 11kg

Laser Cutter
GT-01LS
Model GT-7035-NUA
Light source Sunlamp 1pc
ASTM-D638, JIS-K6301, K7113
Power 300W
Temp. room temp. +100C~1200C
Timer LED 0~9999HR
Heating method Hot air circulation
Model GT-01LS Rotating speed 3 ± 1rpm
Cutting acuracy ± 0.1 ~ 0.2mm Dimension (W x D x H) 88 x 68 x 160cm
Blade thikcness 0.7mm Weight 200kg
Application Rubber, PVC, leather, paper, etc. Power 1§, AC 220V, 50HZ (specified by user)

13
 TESTING MACHINE FOR RUBBERS & TIRES
Moisture Determination Balance Resilience Elasticity Tester
FD-610 GT-7042-RE
MADE IN JAPAN DIN5312, DIN53573
The FD-610 is a digital infrared It serves to test elasticity of
moisture tester with few operating elastomers, flexible cellular
keys to improve operability. In materials and similiar materials
addition the FD-610 provide under impact stress to get
features such as optional weight the optimum applicability,
sampling, auto tare subtracting the quality differentiation of
and high contrast displaying, etc. various material, changes of
The semisealed drying chamber charactersistic after ageing
reduces the effects of outside test, etc. To ensure the quality
air and helps to improve drying assurance during the production
efficiency by skillfuly controlling process and or on the finished
convection caused by heating. product.

Model FD-610 Model GT-7042-RE

Measure method Heated drying weight measurement method Impact energy 0.5J, 0.2J
Sample weight 5~70g (optional weight sampling) Range of indication 0~100%
Weight reading limit 5mg Scale value 1%
Measure range 0.0 ~ 100% (moisture content) Adjusting rangefor specimen
0~60mm x 1mm
thickness
Accuracy ±0.1% (5g or more)
Device for test on elastomers
Display method LCD display Impact action 0.5J
Heat source 185W infrared lamp x 1 Hemisphere dia. 15mm
Power AC 100 ~ 240V, 50/60HZ Device for test on cellular
materials
Weight 3kg Impact action 0.2J
Shape A, Hemisphere dia. 30mm
Multi-Functional Digital Thermometer Shape B, Cylinder dia. 40mm, radius of round end 40mm

TC-700 Dimension (W x D x H)
Weight
62 x 12 x 33cm
34kg
MADE IN JAPAN
The meter is to measure Viscometer
the temperature of various materials
VT-03F/VT-04F
HG/T3323 (MADE IN JAPAN)
Measure the viscocity of
chemical

NR-34A
Model VT-03F VT-04F
Test range 2~33, 15~150, 50~300mpa.s 0.3~13, 3~150, 100~4000dpa.s
Rotating speed 62.5rpm
Weight 570g
Power AC/DC available 1.5V x 4/400mA

NR-35B
NR-33
PH Meter
note: unit exclude probe (optional)
Model TC-700 PP-201
Sensor type Type K or J (selectable by the internal dip switch) Measure the PH values of
Measuring range K: -1600C ~ +13720C
various solutions
J : -1700C ~ +10000C
Resolution automatic +199.90C or less 0.10C + 2000C or more 10C
00C ~ + 199.90C: ± 0.1% of reading + 0.70C
Accuracy - 0.10C or less, +2000C or more: ± 0.2% of reading + 10C
(at ambient temp. 23 ±50C)
0
C/ 0f (selectable), auto power - off (selectable), data
Operation function Model PP-201
hold, max/min. value record, data storage, relative
0 0
Hold, RCD, REL, MAX, MIN, MEM, C/ f burnout, battery Test range 0~14PH
Display
alarm Resolution 0.01PH units
Dimension (W x D x H) 68 x 35 x 165mm Accuracy 0.02PH
Weight 200g Weight 4.3kg
Power Battery 006P (9V) Power 9V battery
Accessories One battery 006P, intruction manual Accessories Electrode x 1, buffer x 1

14
TESTING MACHINE FOR ELECTRIC APPLIANCE
Dielectric Withstanding Tester Plug Bending Tester
JIS-C3005, UL-62, 1581 UL-817

GT-7058 GT-7062
This tester is to test the damaged degree of conductor or various materials This tester is specialized in testing the flexing endurance between power cord
of insulator caused by the specified voltage to ensure the security of usage of and blades, and is capable of testing the flexibility resistance of the cord it self.
insulating material. The testing method is to input voltage upon specimen and
then increase it slowly to the specified value. Then check wether specimen can
withstand that voltage within a certain time or not

GT-7058-C
GT-7058-A/B

Model GT-7058-A GT-7058-B GT-7058-C Model GT-7602

Capacity 5KVA 10KVA 0.5KVA Grips 6 sets
Input voltage AC 220V AC 220V AC 110V or 220V Flexing angles 45˚, 60˚, 90˚, 180˚, (adjustable)
Output voltage AC 7.5KV, 15KV AC 10KV, 20KV AC 5KV, 10KV Flexing speed 10 ~ 60 c.p.m (adjustable)
Pressure method Automatic Automatic Automatic Auto corner 6 sets, all independent (separately)
Dimension Load 50, 100, 200, 300, 500g
75 x 94 x 160mm 58 x 40 x 72mm
(W x D x H)
Dimension (W x D x H) 86 x 51 x 81cm
Weight 265kg 42kg
Weight 132kg
AC 220V, 50/60Hz, AC 220V, 50/60Hz, AC 220V, 50/60Hz,
Power Power AC 220V, 3A
2.5A 50A 2.5A

Vibration Tester Flexible Cable Flexing Tester

IEC-60227-1, VDE-0472
GT-7002 GT-7301
This machine is specially designed to test the
vibration resistance of the finished products Cut off the cable about 5m in lenght as being the test specimen which shall
or components of electron, electric appliance, be kinked over the specified diameter of both puliyes and each end has to
urtomobile, communication, etc. be loaded with a wheight, meanwhile each conductor of sample shall be
loaded with a current later, at an approximately constant speed of 0.33m/s to
move the pullyes over a distance of 1 m to make the specimen be reciprocally
bent and tightened, when specimen breaks down or the preset numbers are
reached the machine will stop automatically, afterwards take off the sample
and judge the characteristic of flexibility

Model GT-7002-A
Vibration direction up/down, left/right
1 forth and back per min.,
Circulating period
800~3600, 800~1500 c.p.m
Vibration speed 800~3600 c.p.m (adjustable) other kinds of speed can
(frequency) be offered upon ordering
0~4mm, 1.5mm or 2mm
Vibration range
(adjustable) 1.5mm or 2mm commonly used
60kg
Load weight
(other kinds of weight can be offered upon ordering) Model GT-7301
50 x 60cm Load 1 or 1.5kg
Surface of testing table
(other kinds of sizes can be offered upon ordering)
Testing current 1.5 ~ 12.5A or 3 ~ 32A (optional)
Automatic timer 0~6 two sets of 0~6 hours (adjustable)
Testing votage AC 220V. 60Hz / 50Hz. AC 380V, 60Hz / 50Hz
DC 2HP 2
Motor
2 pcs of 2HP DC steples speed motor Auto corner 6 sets, all independent (separately)
Dimension Main body 120 x 80 x 59cm Counter Electronic type 6 digits. Auto stop function
(W x D x H) Control box 53.5 x 40.5 x 135cm Dimension (W x D x H) 188 x 53 x 150cm
Weight (approx) 620kg Weight 480kg
Power 1ph, AC 220V, 10A Power 3ph,4W, AC 220V, 35A

15
 TESTING MACHINE FOR FOOTWEAR & LEATHERS
Shoe Flexing Tester Ross Flexing Tester
SATRA TM92 ASTM-D1052, ISO-4643, SATRA TM60

GT-7011-SA GT-7011-R
This tester is used for Specially test the flex-endurence of rubber, sole, PU, etc materials
determining the flexibility
resistance and or indicating
the sole cracks of shoe or
shoe through reciprocating
flexing movements under
the specified angle and
frequency

Model GT-7011-SA
Model GT-7011-R
2 pairs (4 pieces) UK size for childrens shoe 4~13; for
Specimen
adults: 1~12 Grips 6 sets, it can test 12 pieces
Flexing angle 100, 150, 200, 250, 300, 350, 450, 500, 600, 900, (adjustable) Counter LCD, 0~99.999.999
Counter LCD, 0~99.999.999 Dimension (W x D x H) 78 x 48 x 44cm
Dimension (W x D x H) 95 x 56 x 63cm Weight 56kg
Weight 236kg Power 1ph. AC 220V, 3A
Power 1ph, AC 220V, 2.8A Option item Needle or plane type puncher

Taber Type Abrasion Tester Din Abrasion Resistance Tester

DIN-53109, 52347, TAPPI-T476, ASTM-D1044, D3884, ISO-5470-1 DIN-53516, ISO-4649, GB/T9867, SATRA TM174, BS-903, JIS-K6264

GT-7012-T GT-7012-D
Use for cloth, paper, paints, plywood, This tester is used
leather, tile glass, rubber etc. The to determine the
testing method is executed to make abrasion characters
specimen abraded by a pair of
grinding wheels under the specified
load.

drilling machine
cutting tool

Model GT-7012-T Model GT-7012-D

Load 250, 500, 1000g Weight 2.5N, 5N
Counter LCD, 0~99.999.999 Length of drum 460mm
Dimension (W x D x H) 53 x 32 x 31 cm + vacuum cleaner Abrasion path 40m / 20m,correspond to rotations of the drum
Weight 18kg (w/o vacuum cleaner) Dimension (W x D x H) 70 x 30 x 30cm
Power 1ph, AC 220V, 10A Power 1ph. AC 220V, 3A
Optional accessory Trim machine of grinding wheel (GT-7012-T1) Weight 61kg

Universal Wear Tester Martindale Abrasion Tester

AATCC-119 & 120, ASTM-D3886, BS-3424, ASTM-D4966, DIN-53863, SATRA TM31, ISO-20344
D3514, D3885, DRAFT 20-0-70
GT-7012-M
GT-7012-S This machine is ideal for determining the abrasion resistance of upper, lining,
This tester is a multifunction and socking and similar types of shoe materials, particularly those made of fabric
precision instrument for measuring
the abrasion durability, flex wear and
edge wear of the specimen as paper,
plastics, rubber, textiles, leather, etc

Model GT-7012-S
Tension weight 2~1/2lb, 2~1lb, 1~2lb
Head weight 2~1/2lb, 2~1lb
Pressure range 1~9psi
Table stroke approx. 1” Model GT-7012-M
Counter 0~99.999 Load 595g, 795g
Timer 30min Counter LCD, 0~999.999
Dimension (W x D x H) 31 x 65 x 57cm Dimension (W x D x H) 56.5 x 56.5 x 31.5cm
Weight 68kg Weight 47kg
Power 1ph, AC 220V, 6A Power 1ph. AC 220V, 1.5A

16
TESTING MACHINE FOR FOOTWEAR & LEATHERS
Akron Abrasion Tester Velcro Fatigue Tester
BS-903, GB/T 1689, JIS~K6264, CNS-743 DIN-3415, SATRA PM123

GT-7012-A GT-7082-E
This tester is designed to It is used for testing the peel
use together with a special and shear strength of touch
balance for testing the abrasive and close fasteners.
consumption for the rubber
products such as sole, tire, belt
of tank, etc.

Model GT-7012-A
Grinding wheel Outside dia. 150mm, 25mm (w), grit 36#
Specimen Slanted Range 0 ~ 450 Adjustable
Specimen rotating speed (op-
(GB)76±2 rpm
tional) Model GT-7082-E
Grinding wheel rotating speed 34±1 rpm Counter LCD, 0~99.999.999
Counter LCD, 0~99.999.999 Motor AC 1/8 HP variable frequency motor
Dimension (W x D x H) 57 x 52 x 45cm Dimension (W x D x H) 70 x 47 x 60cm
Weight 57kg Weight 51kg
Power 1ph. AC 220V, 3A Power 1ph. AC 220V, 3A

Densicom Tester Bally Leathers Flexing Tester

BS-3144, JIS-K6545

GT-7190 GT-7071
This tester is used for testing Place the specimen in position and
the density of the shoe sole bend it repeatedly until it breaks.
made from rubber, plastic and
EVA foam rubber

Model GT-7190 Model GT-7071

Capacity 1000g Dia. of specimen Ø 48mm
Display accuracy ± 1% Specimen dia. after grip Ø 25mm
Volume of water tank (L x W x H) 500 x 145 x 300mm Reading range 0.05 ~ 25mm
Stroke 250mm Dimension Ø 7cm, 15cm(H)
Grips Insert x1, clip x1 Weight 1.3kg
Printing PL-16 by PL-16 dot matrix printer
Weight 52kg
Leather-Cracking Tester
Adiads GE22, DIN 53325
Dimension (W x D x H) 58 x 40 x 85cm
Power 1ph, AC 220V, 50/60Hz
GT-7072
Leather Softness Tester It’s used for testing the cracks index
of various vamps and thin leather.

GT-303

This tester is used to ensure that the

leathers in the same pack are of a similar
softness or assess that the softness
across a skin or hide in everywhere is
uniform.
Model GT-7072
Model GT-303 Dia. of specimen Ø 48mm
Load 530 ± 10g 500g, drive by miniature pneumatic damper Specimen dia. after grip Ø 25mm
Dial 0.1 ~ 10mm (0.1 ~ 7.6mm) Reading range 0.05 ~ 25mm
Dimension (W x D x H) 13.6 x 48.5 x 16.8cm Dimension Ø 7cm, 15cm(H)
Weight 5.3kg Weight 1.3kg

17
 TESTING MACHINE FOR FOOTWEAR & LEATHERS
Super Daylight Perspiration Meter
GT-100 W1
AATCC-15, ISO 10SE04, JIS-L0846,
L0847, L0848, L0854, GB/T 392
This machine is specially designed
to offer the standard & objective GT-7023
illumination in order to accurately
facilitate color control and comparison.
This machine is specially designed AATCC
to offer the standard & objective Completely and averagely soak the
illumination in order to accurately specimen into the acid and alkaline
facilitate color control and comparison

Model GT-100- w1 JIS

Artificial daylight D65 65000K color temperature, 2x20W, 2pcs
Measure grade of sweat endurance
againts the gray scale after drying
Sunset light 28000K color temperature, 4x20W, 4pcs
Light source

F 40000K color temperature, 2x20W, 2pcs

Model Specimen Acrylic Plate Load
or or
U3000 30000K color temperature, 2x20W, 2pcs ISO 40 x 100mm 115 x 60 x 1.5mm (D) 5kg

Ultravuilet (UV) Wavelength 365mm 1x20W, 1pcs JIS (A) 60 x 60mm 115 x 63 x 1.5mm ~ 3mm (D) 4.6kg
JIS (A) 40 x 100mm 115 x 63 x 1.5mm ~ 3mm (D) 5.1kg
TL84 40000K color temperature, 2pcs
AATCC 60 x 60mm 4.5kg
Timer LCD, 0~9999hrs
Interior (W x D x H) 67 x 38 x 36cm
Model AATCC JIS
Dimension (W x D x H) 71 x 40 x 57cm
Dimension
25 x 8 x 19cm 17 x 8 x 19cm
Weight 32kg (W x D x H)
Power 1§, AC 220V 50Hz (or specified by buyer) Weight 8kg 8kg

Whole Sole Flexing AATCC Made In USA

EN-344, SASTRA TM 161, ISO-20344
GT-0804, GT-0805
GT-7011-E ISO-R105/1, JIS-L0804, L0805
This machine is used to GT-0804 for assessing specimen’s change in color after color fastness test
determine the resistance GT-0805 for assessing specimen’s stain degree after color fastness test
of materials to cut
growth
during repeated flexing.

GT-0804 GT-0805

Model GT-7011-E
Sampling 3pcs JIS (made in Japan)
Counter LCD, 0 ~ 999.999
Motor DC brushless 120W
Dimension (W x D x H) 100 x 45 x 54cm GT-0804 GT-0805
Weight 168kg
Power 1ph, AC 220V, 3A Grade 5, 4~5, 4, 3~4, 3, 2~3, 2, 1~2, 1

Shoe Lace Abrasion Tester Drying Oven

DIN-4843, QB/T2226, SATRA PM154

GT-7012-E GT-7024
For measure life cycle by Dry, bake and preheat
abrasion method. various materials or
specimen. By means
of hot air circulation
method, the heating and
temperaturedistribution
are uniform.

Model GT-7012-E
Spacer 4sets
Sampling 4pcs
Counter LCD, 0 ~ 999.999 Interior Temp. Dimension
Model Weight Power
Motor DC brushless 120W (W x D x H) (Optional) (W x D x H)
61 x 74 x 1§, AC
Dimension (W x D x H) 66 x 58 x 42cm GT-7024-EM 40x40x45cm
room temp. 113cm 220Vac,
Weight 66kg 84kg
+100~3000C 71 x 74 x 50HZ,
GT-7024-EL 50x50x60cm 4Kw
Power 1ph, AC 220V, 3A 128cm

18
TESTING MACHINE FOR TEXTILE
Crock Meter Sample Cutter
ISO-105, ASTM-D2054, AATCC-8, JIS-L0849, 0862, GBl/T3920

GT-7034 GT-230/100-C
It’s used to determine the decolored extent for the dyed textile or dyed leather Sample Cutter cut out rapidly and accurately circular specimens,
by abrasion method of a particular fixed area or diameter, from virtually any type of material,
including woven, non-woven and knitted textiles, carpet, film, foam, paper and
board. The material to be cutis placed between the Sample Cutter and a special
cutting board.
When the safety catch is
released,slight pressure
on the handwheel
brings internal blades
into contact with the
GT-7034-B GT-7034-A material. Specimens are
cut out by rotating the
handwheel under the
Model GT-7034-A GT-7034-B pressure. The design
soft he instrument is
Motor/double hammers Manual/single hammer
such that specimens
Motor 1/4 HP are removed cleanly
Counter LCD 0 ~ 999.999 0 ~ 9.999 with smooth edges.
Dimension (W x D x H) 56 x 55 x 37cm 65 x 20 x 22cm
Model Specimen Area Specimen Diameter Approx. Depth of Cut
Weight 75kg 7.5kg
230/100-C 1002cm 113cm 10mm
Power 1ph, AC 220V, 3A
Each sample cutter is supplied complete with 2 sets of blades and 1 cutting board

Slide Fasteners Reciprocating Tester Dyeing Rubbbing Tester

SATRA TM 50, QB/T2171 JIS-K6404, L0849, L0862, P8136

GT-7518 GT-7020
ThIs tester is ued to determine
the durability of reciprocating
motions for the slide fasterner
under the lateral and lonitudinal
strength. The test is performed
by the puller of slide fastener
reciprocating at a constant speed
as 30 times/min till reaching the
specified times
Model GT-7020
Specimen 22 x 3cm
Model GT-7518 White cotton cloth (extra
8 x 8cm
charge)
Reciprocating range 75mm
Counter LCD, 0 ~ 999.999
Width of lateral grippers 25mm
Dimension (W x D x H) 56 x 55 x 34cm
Weights of longitudinal
0.28 ~ 0.34kg Weight 58kg
clamps
Counter LCD, 0 ~ 999.999 Power AC 220V, 3A
Dimension (W x D x H) 54 x 33 x 66cm
Spray Tester
Weight 62kg
Power 1ph, AC 220V, 3A

Wrap Reel
GT-7033
It is suitable for all kinds of
GT-7025-A water-proof cloth, raincoat
cloth, umbrella cloth ect,
textile and fibre cloth
To get yarn thread with
required length in oder to test
strength og lea and quality of
yarn, the drum can be freely
adjust, digital counter can
indicate rotating times.

Model GT-7033
Specimen 18 x 18cm
Model GT-7025-A
Specimen frrame ф152mm
Operation at same time 5 Threads
Slope of specimen 450
Counter 0 ~ 9999, electronic auto counter
Hole of nozzle 19 hole, ф0.88mm
Motor 1/2HP
Space between nozzle &
152mm
Dimension (W x D x H) 93 x 55 x 65cm specimen
Weight 67kg Dimension (W x D x H) 27 x 33 x 66cm
Power 1ph, 220V Weight 14kg

19
 TESTING MACHINE FOR PLASTICS & ADHESIVE TAPE
Melt Flow Indexer
ASTM-D1238, D3364, ISO-1133, JIS-K7210, GB/ T 3682

GT-7100-MI
Model GT-7100-MI
Temprature control Room temp. ~300˚C (accuracy ±0.1˚C), PID control, include overheat protection
325g, 1000g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 12500g, 21600g
Load
(select one when placing order)
Motor 30w
Auto cutoff device Auto/manual selection, time interval 0.1~999.9min
• Brush for cleaning cylinder x1
• Rod for cleaning cylinder x1
• Rammer x1
• lLoading rod for pressing the specimen x1
Accessories • lSpeculum x1
• lBakelite funnel for feeding specimen x1
• Spirit level x1
• Die gauge x1
• Die cleaner x1
Dimension (W x D x H) 40 x 51 x 60cm
Weight 42kg (without weights)
Power 1§, AC 220V, 5A

Molding Test Press Plastic Films Drop Dart Tester

GT-7014-H ASTM-D1709, ISO 7765-2, GB 9639

GT-7037-F
This machine is very convenient for The drop dart is revealed by
preparing test specimens. Put raw mechanism driven by pneumatic
materials into iron die and clamp power through a specified heigh to
die beetwen the electric heating impact the film specimen clamped
plates of the machine,then heat by the clamping assembly.
and compress the die to mold the Determination of energy in terms
raw materials into specimens for of the weight (mass) that cause
testing in laboratory and being the the failure of plastic film in 50% of
standard in mass production. specimens test

Model GT-7014-H
Capacity 10, 30, 50ton Optional Model GT-7037-F
Temp. Room temp. ~ 3000C Method of grip pneumatic type
Control system PLC + HMI Release method of dart pneumatic type
Heat plate area 30 x 30mm Drap height 600mm (26”), 1524mm (60”)
Exhaust control 0~999 Pressure 3 ~ 5 kg/cm2 (prepared by customer)
Dimension (W x D x H) 100 x 75 x 150cm Dimension (W x D x H) 81 x 65 x 240cm
Weight 765kg Weight 87kg
Power 3ph, 4w, AC 380V, 20A Power 1ph, AC 220V, 1A

Melting Point Apparatus

IA9000 Series
Digital IA9000 Series consists of an adjustable 8X viewing magnifier arm that folds and a large LCD display.
Its heating chamber is an aluminium heating block, which avoids hazards and mess associated with oil baths.
Spesification
WxDxH 20 x 35.5 x 8cm (8 x 14 x 3.3in)
Shipping weight 2.5kg (5.5lbs)

Cat No. Description Electrical Requiments

IA9100 Fixed Ramp Rate Model 230V
IA9100 x 1 Fixed Ramp Rate Model 115V
IA9100 x 6 Fixed Ramp Rate Model 230V EU Plug
IA9200 Programmable Ramp Rate Model 230V
IA9200 x 1 Programmable Ramp Rate Model 115V
IA9200 x 6 Programmable Ramp Rate Model 230V EU Plug
IA9300 Beginning/Ending Recording Model for Pharmacopeia Requirements 230V
IA9300 x 1 Beginning/Ending Recording Model for Pharmacopeia Requirements 115V
IA9300 x 6 Beginning/Ending Recording Model for Pharmacopeia Requirements 230V EU Plug

20
TESTING MACHINE FOR PLASTICS & ADHESIVE TAPE
Computer HDT/Vicat Tester Izod Charpy Digital Impact Tester
ISO-179, 180, ASTM D256, D6110, GB/T1843, 1043

HV-2000A Series GT-7045-MD

Measure the energies absorbed by the specimens of various metallic materials
The tester is used after impacting at a specified angle.
for determining the
temperature at which an
arbitrarydeformationoccurs
(HDT) and the temperature
at which a specified
needle penetration occurs
(VICAT) when specimen
are subjected to specified
controlled test conditions.
uring test, the screen will
display the temperature
dan deformation of every
specimen simultaneously.
When reaching the test
conditions, it will beep
as a reminder. It also as a
ventilation system.

Model HV-2000A-C6 HV-2000A-C3

Sampling 6 sets 3 sets
Model GT-7045-MD
Display Computer
(1)ZOD (1J, 2.75J, 5.5J) & CHARPY(1J,2.75J, 5.5J)
Testing method HDT/VICAT Capacity optional
(2)ZOD (1J, 2.75J, 5.5J) & CHARPY(1J,2J,4J,5J)”
0
Temperature range Room temp. 300˚C Readability 0.1 C Impact speed 2.9 m/sec, 3.46 m/sec
Increasing rate of 0 0 0 Impact end to shaft center 22.96cm, 32.7cm
HDT 2 C/min, VICAT 50 C/hr or 2 C/min
temperature
Drop angle 1500
Cooling time 300 ~ 5000C within 40min, 300˚C ~ room temp. within 1hr
Energy unit kg-cm, kg-m, Ib-ft, J, (or defined by user)
Temperature accuracy 0.10C
Angle display resolution 0.050
Heat transfer medium Silicone oil
Energy display resolution 0.01J
Cooling method Compression cooling
Printing by PL-16 printer
1g, 2g, 3g, 5g, 10g, 20g, 100g, 200g, 300g, 500g, 1000g, 10N
Loading weight
2000g, 40N Dimension (W x D x H) 60 x 32 x 78cm
Dimension (W x D x H) 147 x 72 x 170cm Weight 180kg
Weight 1 AC, 220V, 25A Power 1ph, AC 220V, 50/60Hz

Tape Retentivity Tester Drop Ball Impact Tester

CNS-11888, GB/T4851
GT-7037
GT-7090
Measure the distance of slide of the tape after a certain time Specially test materials of
plastic, china, acrylic, glass,
plastic, etc.

Model GT-7090 Model GT-7037

Load 1kg, 5pcs Max. height 2m or optional
Sampling 5 sets, individual timing Control way of dropped ball adopt AC electromagnetic control method
Battery timer 1 ~ 999.999min Dimension (W x D x H) 55 x 54 x 227.5cm
Dimension (W x D x H) 45 x 20 x 63cm Weight 76kg
Weight 32kg Power 1ph, AC 200V, 1A

21
 TESTING MACHINE FOR PAPER, CARDBOARD, CARTON & PACKING
Servo Control Container Compression Tester Servo Control Container Compression Tester
TAPPI-804, JIS-Z0212, GB/T 4857.4 TAPPI-804, JIS-Z0212, GB/T 4857.4, ISO-12048

GT-7001-DS GT-7036-ASF
It’s used for measuring the pressure strength of cartons containers etc. This machine is used for determining
the compression resistance of cartons.

Model GT-7001-DS
Capacity (optional) 20, 50, 100kN Model GT-7036-ASF
Unit (switchable) Kgf, lbf, N, kN, kPa, Mpa Capacity 10kN
Load resolution 1/200,000 Unit (switchablet) Kgf, lbf, N, kN, kPa, Mpa
Load accuracy Within ±0.5% Load resolution 1/32.000
Test space (L x W x H) 120 x 120 x 100cm or specified Load accuracy Within ±1%
Display method U62 Dedicated software Test space (L x W x H) 600 x 600 x 600mm
Speed of compression 0.001~200 mm/min 0.001~200 mm/min Sensor Load cell
Spead accuracy ±0.5% Display and control system PLC+HMI
Motor AC servo motor Test speed 0.01~200 mm/min, Adjustable
Dimension Main unit 215 x 150 x 270cm Spead accuracy ±0.5%
(W x D x H) Computer desk 100 x 60 x118cm Motor AC servo motor
Main unit 1240kg Dimension (W x D x H) 98 x 60 x 208cm
Weight
Computer desk 60kg Weight 510kg
3§, AC 220V, 50/60Hz, 15A/3§, AC 380V, 50/60Hz,
Power Power 1ph, AC 220V, 50/60Hz (specified by user)
12A (specified by user)

Bursting Strength Tester Automatic Bursting Strength Tester

GT-7013-MD
ISO-2759, GB/T-6545, JIS-P8112, L1018, ASTM-D2210, TAPPI-T403

GT-7013-ADP
This tester is used to test the bursting-resistance strength of corrugated paper This type of Digital Bursting Strength Tester can test the bursting strength of
box which are used in packing the products as electronic instruments, electric the specimen being tested automatically. As long as placing the specimen, it will
wire, hardwares, bike, valise, food, shoe, furniture, etc. It can be also used to test automatically detect, test, return, calculate, save and print functions as well.
the cloth and syntectic leather.

Model GT-7013-MD
Capacity 0 ~ 100kgf/cm2
Model GT-7013-ADP Resolution 0.01kgf/cm2
Sensing method Pressure transducers Unit kgf/cm2, kPa, psi or defined by customer
Indicating method Digital Display and control system 5kgf/cm2
High pressure 0~100kgf/cm2 (0.01kgf/cm2) Gripping pressure 0.01~200 mm/min, Adjustable
Capacity (optional)
Low pressure 0~16kgf/cm2 (0.01kgf/cm2) Air source Min. 6kgf/cm2 (prepared by customer)
Motor Shockproof motor 1/4HP Printout Pavg, Pmax, Pmin V (variety), etc
Dimension (W x D x H) 43 x 53 x 52cm Dimension (W x D x H) 56 x 47 x 55cm
Weight 67kg Weight 116kg
Power 1ph, AC 220V, 2.6A Power 1ph, AC 220V, 3A

22
TESTING MACHINE FOR PAPER, CARDBOARD, CARTON & PACKING
Micro-Computer Ring Crush Tester Printing Ink Durability Tester
TAPPI UM 487

GT-6011-B GT-7034-T
This tester is used for testing
the ring crush strength of the
paperboard.

Model GT-6011-B
Capacity 200kgf
Resolution 1/100.000
Accuracy ±1%
Compression plate Ø 150mm This machine used to determine the abrasion resistance of printing ink.
Space between compression
180mm Model GT-7034-T
plates
Load 2lb, 4lb
Test speed 12.7mm/min
Abrasion space 57.15mm around arc locus
Printing PL-16 by PL-16 printer
Abrasion hammer 50.8 x 50.8mm
Dimension (W x D x H) 55 x 50 x 86cm
Weight 88kg Abrasion speed 43/min. (CPM)

Power 1ph, AC 220V, 2A Counter LCD, 0 ~ 999.999

Dimension (W x D x H) 27 x 28 x 35cm
Adhesive Strength Test Accessories Weight 16kg
GB/T6548, JIS-Z0402, CNS-3327 Power 1ph, AC 220V, 13A

GT-6011-1
This attachment is used for
Column Compression Testing Grip
JIS-Z0403-2
determining the adhesive
strength of corrugated board.
GT-6011-2
This grip is working with ring
crush tester to test the column
compression strength.

Model A B C
Specimen 80 x 25mm/50 x 150mm Model GT-6011-2
Dimension (W x D x H) 125 x 76 x 30mm 91 x 76 x 30mm 109 x 76 x 30mm Dimension (W x D x H) 15 x 10.5 x 6.5cm
Weight 500g 350g 400g Weight 1.5kg

Elmendorf Tearing Strength Tester Water Absorption Tester

TAPPI-T414, JIS-P8116 TAPPI-T441, JIS-P8140

GT-7055 GT-6015
Use the segment pendulum This tester is used for
to tear the specimen and then determining the water
read the tearing strength on absorption of paper.
the scale.

Model GT-6015
Height of frame 25mm
Model GT-7055 Thickness of frame 6mm
Capacity 0 ~ 1600g Fixed plate 170 x 25 x 6mm
Grip Width 25mm, depth 12mm Base 150 x 150 x 10mm
Dimension (W x D x H) 50 x 25 x 37cm Dimension (W x D x H) 5.5 x 5.5 x 6.5cm
Weight 13kg Weight 2.8kg

23
 TESTING MACHINE FOR PAPER, CARDBOARD, CARTON & PACKING
Sample Cutter for Column Compression Tester Die Cutter
JIS-Z0403-2

GT-6019 GT-6018
This machine is used for preparing the standard specimens for ring crush test
or others
GT-6019-B

GT-6019-A

Use two cutters. (A) Parallel Cutter (B) Angle Cutter.

To get a standard specimen for column compression test

Model GT-6019-A
25, 30, 50, 60, 80, Model GT-6019-B
Adjustable space 100, 120, 150, 5

Specimen after cut Model GT-6018-A GT-6018-B

175mm 65 50 25
(mm) Specimen after cut 152 x 12.7mm 200~250 x 15mm
Cutting depth <8mm 100
Application Ring crush test Tensile test
Dimension (W x Dimension (W x
125 x 76 x 30cm 20 x 20 x 30cm
D x H) D x H) Dimension (W x D x H) 67 x 45 x 47mm
Weight 36kg Weight 5.5kg Weight 35kg

Flat Crush Cutter Puncture Tester

ISO-3035 TAPPI-T-803, JIS-P8134, GB 2679.7

GT-6020 GT-6012
Use this cutter to get a standard specimen for horizontal ring crush test. This tester is used
for determining the
puncture strength
of corrugated board,
fibre board, plastic and
plywood board

Model GT-6012
Specimen 175 x 175mm, 300 x 300mm
Punch head height 1” radius 1.5mm
Model A B C
(A) Scale 0~53.5kg-cm (D) Scale 0~428kg-cm
Dia. after cut (optional) ø90.6±0.5mm ø112.8±0.5mm ø64±0.5mm
Capacity (B) Scale 0~107kg-cm (E) Scale 0~26.75kg-cm
2 2 2
Area of specimen 64.5cm 100cm 32.2cm (C) Scale 0~214kg-cm
Dimension (W x D x H) 125 x 76 x 30mm 91 x 76 x 30mm 109 x 76 x 30mm Dimension (W x D x H) 86 x 43 x 80cm
Weight 3kg Weight 135kg

Drop Tester
ASTM-5276, GB/T 4857, 5

GT-7003-B1
It simulates the drops/falls of the finished product with the packing to evaluate
its damage degree.

Model GT-7003-Bq
Raise range 20 ~ 150cm, 40 ~ 165cm (optional)
(22 ~ 108) x 76 (20 ~ 150)cm
Adjustable
(22 ~ 108) x 76 (40 ~ 165)cm
Max. specimen weight 60kg (approx)
Height adjustable 1/4HP
Motor
Weight adjustable 60W
Main unit : 227 x 142 x 220cm
Dimension (W x D x H)
Control unit : 25 x 33 x 109cm
Weight 667kg (approx.)
Power 1ph, AC 220V, 3A

24
ENVIROMENT TEST
Programmable Temperature & Humidity Tester
GT-7005-A
This is also called environment tester for testing functions of heat endurance, cold-endurance, drought-endurance, wet-endurance, which is suitable for quality
control of electronics, electric appliance food stuffs, automobiles, metal, chemicals plywood, etc..

GT- GT- GT- GT- GT- GT- GT- GT- GT- GT-
Model 7005- 7005- 7005- 7005- 7005- 7005- 7005- 7005- 7005- 7005-
A7M A7L -A7X A4S A4M A4L A4X A2X A2L A2M
System Balanced temperature and humidity control system
-70~1200C(+1500C -20~1000C(+1500C
Temp. range -40~1000C(+1500C optional)
optional) optional)
Humid. range 20 ~ 98% R.H
temp. fluctuation 1000C within ± 0.30C; 1500C within ± 0.50C
Temp. tolerance 1000C within ± 1.00C; 1500C within ± 1.50C
Humid. fluctuation ±2.5% R.H
Humid. tolerence ±2.0% R.H
Humid. uniformity 3.0% R.H
-70~1000C within
Heating up time -40~1000C within 45min -20~1000C within 35min
55min
20~
0
Cooling down time 20~-700C within 90min 20~-400C within 60min -40 C 20~-200C within 50min
within
80min

Interior dimensions 50x75 60x85 100x100 50x60 50x75 60x85 100x100 100x100 60x85 50x75
(W x H x D) cm x60 x80 x80 x50 x60 x80 x80 x80 x80 x60

Interior material Frosty stainless steel

Exterior material Stainless steel baking finish
Insulation Rigid polyurethane foam and glass wool
Air cooled
Refrigeration Hermetic compressor,
system cascade refrigeration Hermetic compressor, single stage refrigeration system
system
No fuse breaker refrigrator over load relay, refrigeration high pressure switch, over
Safety devices temp, protector, protection relay, protection fuse, water lever protector, overheat
protector, alarm
Viewing window, shelves (freely adjustable 2 pieces), cable port (ф 50mm), chamber
Accessories
lamp
Dimension 100x127 110x138 156x142 100x108 100x127 110x138 156x142 156x142 110x138 100x127
(W x D x H) x166 x176 x201 x150 x166 x176 x201 x201 x176 x166

1§, AC
Power 3§, AC 380V / 415V ±10%, 50HZ / 60HZ (specified by user) 220V±10%,
50HZ / 60HZ

Salt Spray Tester Vertical Type Freezing Tester

GT-7004-M GT-7006-V
ISO-9227, STM-B117, JIS-D0201, H8502, ASTM-D1790, D1593, JIS-K6545
H8610, Z2371, GB/T10125
This tester is especially used to test the bending/flexing durability of rubber materials, under the specified cold
environment

Model GT-7006-V 30
Temp. range room temp. ~ -300C
Interior (W x D x H) 50 x 50 x 60cm
Temp. acurracy ± 0.50C
Cooling down Within 60 min (approx.)
Refrigerantion
Single stage, hermetic compressor
system
Refrigerant Eco friendly
Measure the thickness of the specimen
Stainless steel
and calculate its permanent deformation Inner chamber/
(interior: imported frosty stainless
rate. grips
steel)
Insulation (to keep
Hard polyurethane foam
Model GT-7011-R warm)
Test chamber 270l Temp. control Control and display system
Temp. controller PLC control HML display
NSS.ACSS 350C ± 10C /
Test Counter LCD, 0 ~ 999,999
CASS 500C ± 10C
Temp.
NSS.ACSS 470C ± 10C / Viewing windows
Air 35.5 x 31.5cm, 3 layer vacuum glasses
CASS 630C ± 10C (W x D)
Interior dimension Inner lamp PL Lamp, 9W
90 x 60 x 50cm
(W x D x H) Dimension (W x
115 x 105 x 151cm
Test water 25l D x H)
Dimension Weight 400kg
153 x 93 x 130cm
(W x D x H) Power (approx.) 1ph, AC 220V, 50/60HZ
Weight 92kg Current 18A
Power 1ph, AC 220V, 9A

25
 ENVIROMENT TEST
Walk-In type temperature and humidity chamber

GT-BR
The walk-in temperature and humidity chamber uses the unique temperature and humidity-regulating method to balance temperature and humidity.

Model GT-BR-A2 GT-BR-A4 GT-BR-B1 GT-BR-B2

Temp. and humid. control Balanced temperature and humidity control system
High temp. 800C
0
(R.T H.T.80 C) 70
Temp range
Low temp. -200C -400C -100C -200C
0
(R.T H.T.80 C) 80 120 60 80
Humid. range 20~95% R.H
Temp. fluctuation ± 0.50C
Temp. tolerence ±1.50C
Temp. Uniformity 2.00C
Humid. stability ±2.5% R.H
Humid. tolerence ±2.5% R.H
Temp. Uniformity 3.0% R.H
Interior dimensions
210 x 205 x 210 300 x 205 x 210
(W x H x D) cm
Exterior dimensions
330 x 242 x 225 330 x 242 x 235 420 x 242 x 225
(W x D x H) cm
Interior material #SUS-304 (stainless steel plate) / PVC (optional)
Exterior material PVC steel baking finish
Door size (W xH) cm Single opening door (85x180cm)
Insulation 110mm (150mm)
Refrigeration system Water cooled/air cooled/cascade refrigeration system (optional)
Observation window, cable port(50mm), chamber lamp, reverse osmosis device,
Accessories
for windows recorder software
Power 3§, AC 380V 45A 50A 55A 60A

Thermal shock chamber

GT-CHT
The thermal shock tester is adopter for testing material structure or composites. Object to be tested include metals, plastic, rubbers, electronic components.

Model GT-CHT-3A1 GT-CHT-3A1 GT-CHT-3A1 GT-CHT-3A1

System Balanced temperature control system
Msx. Load power 15KVA 30KVA 40KVA 50KVA
Test chamber -400C~1500C within 5 min
Low temp.
-550C~-100C
Temp range chamber
High temp.
Room tmep. ~2000C
chamber
Heating up time Room tmep. ~2000C within 25min
Cooling down time Room tmep. ~650C within 70min
Temp. fluctuation ±1.00C
Temp. uniformity 2.00C
Temp. tolerence ±3.00C
Interiror dimensions
45 x 40 x 40 60 x 50 x 50 70 x 60 x 60 80 x 80 x75
(W x H x D) cm
Interior material Frosty stainless steel
Exterior material Stainless steel baking finish
Insulation Glass wool / rigid polyurethane foam
Refrigeration system Water cooled hermetic sealed compressor and cascade refrigeration system
Refrigerator over load relay, high and low pressure switch, leakage breaker,
Safety devices
overheat protevto, protecto relay, protection fuse, air circulator protector, alarm
Dimensions
148 x 203 x 205 163 x 223 x 215 173 x 243 x 235 190 x 250 x 236
(W x H x D) cm
Specimen loading
5 5 10 15
weight (kg)
Power 3§, AC 380V ±10%, 50HZ/60HZ (specified by user)

26
DUROMETER (RUBBER and PLASTIC HARDNESS TESTER)
When the best of Durometer and workpiece are cohered each other, the indentor changes shape of workpiece by pressurized force caused by spring of Durometer
and workpiece makes force againts this force. Force amount of indentor is indicated as hardness when this pressurized force and repulsive force are equivalent. The
reason why there are various kinds of Durometer, it is for the purpose of measuring.

Standard for Hardness Test of Vulcanized or Thermoplastic Rubber

JIS K 6253, ISO7619, ISO868, ASTM D 2240

GS-719G GS-720G GS-721G

Type A Durometer Type D Durometer Type E Durometer
General Rubber Hard Rubber Soft Rubber

Conform Indentor Weight

Model Type Application Spring Value 0-100 Indentor Shape(mm)
Standard Height(mm) (g)
Truncated cone of Ø 0.79
GS-719N Type A General rubber (medium hardness) 550-8050mN (56.1-821.1gf) 2.50 180
with 350 angle
JIS K 6253 Truncated cone of Ø 0.79
GS-719G Type A (peak pointer type) General rubber (medium hardness) 550-8050mN (56.1-821.1gf) 2.50 180
ISO 7619 with 350 angle
ISO 868 Conical cone of R0.1 with
GS-720N Type D Hard rubber (high hardness) ASTM D 2240 0-44450mN (0-4533gf) 2.50 180
350 angle
Type D (peak pointer Conical cone of R0.1 with
GS-720G Hard rubber (high hardness) 0-44450mN (0-4533gf) 2.50 180
type) 350 angle
GS-721N Type E Soft rubber (low hardness) JIS K 6253 550-8050mN (56.1-821.1gf) Hemisphere of R2.50 2.50 180
GS-721G Type E (peak pointer type) Soft rubber (low hardness) ASTM D 2240 550-8050mN (56.1-821.1gf) Hemisphere of R2.50 2.50 180

Standard for Hardness Test of Plastic

JIS K 7215, ISO868, ASTM D 2240

Hardness is measured by placing

GS-743G GS-744G GS-744G on the sponge sheet.
2.5 11

Type E2 durometer ø25.2 Type FO durometer Dispersion of polystyrene level

Soft Rubber ø80 Unit: mm Soft styrene foam can be judged.

Conform Indentor Weight

Model Type Application Spring Value 0-100 Indentor Shape(mm)
Standard Height(mm) (g)
GS-743G Type E2 (peak pointer type) Soft rubber TECKLOCK E2 550-4300mN (56.1-438.6gf) Hemisphere of R2.50 2.50 180
GS-744G Type F0 (peak pointer type) Soft styrene rubber TECKLOCK F0 550-4300mN (56.1-438.6gf) Cylindrical cone of Ø 25.2 2.50 500

Durometer Stand
GS-710 Series
This is hydraulic exclusive instrument with constant speed/constant load, which has dissolved individual difference to measure rubber hardness. Each durometer
of type A, E, B, O and SRIS with fixing around 1kg weigth and type D, DO, C with fixing around 4kg weight can measure by static loading around 5kg. These load
values are specified in ISO, JIS, ASTM.

Model Weight Load Value Application Durometer Type

GS-710 7kg About 1kg A, B, E, A(old), SRIS, O
ZY-046 4kg About 5kg D, C, DO.C(old)

Dimension
Maximum workpiece Thickness 4kg weight
Digital duometer : 20mm ZY-046 (option)
Analog Durometer : 63mm

27
28
KLS/p&a.056/5k/measuring.19/vic.tek/05.13