Philips Шасси L11M2.1E LA

Colour Television Chassis
L11M2.1E
LA
19150_000_110512.eps
110512
Contents Page
1. Revision List 2
2. Technical Specs, Diversity, and Connections 2
3. Precautions, Notes, and Abbreviation List 5
4. Mechanical Instructions 9
5. Service Modes, Error Codes, and Fault Finding 14
6. Alignments 22
7. Circuit Descriptions 24
8. IC Data Sheets 31
9. Block Diagrams
Wiring diagram Berlinale 40" - 46" 41
Block Diagram Berlinale 42
10. Circuit Diagrams and PWB Layouts Drawing PWB
A 272217190318 PSL 43
A 272217190361 PSL 46
A 272217190441 PSL 49
B 715G4722 SSB Berlinale 52
System Power 1 (B01) 52 68-69
System Power 2 (B02) 53 68-69
Peripheral (B03) 54 68-69
Connector/USB/RS232 (B04) 55 68-69
Audio IO/SPDIF/Headphone (B05) 56 68-69
Speaker/Sound woofer (B06) 57 68-69
Video IO/YPbPr (B07) 58 68-69
Scart (B08) 59 68-69
VGA Input (B09) 60 68-69
LVDS (B10) 61 68-69
DRAM Interface (B11) 62 68-69
MII/GPIO/ServAD (B12) 63 68-69
HDMI Switch (B13) 64 68-69
DVB T/C Demodulator MT5135 (B14) 65 68-69
DVB T/C Tuner (B15) 66 68-69
T-Con/ Power block/Gamma (B16) 67 68-69
E 272217190349/51 IR/LED/Key Board 70
Leading Edge Module (E) 70
E 272217190453/4 IR/LED/Key Board 71
E 272217190475 IR/LED/Key Board 72
11. Styling Sheets
Berlinale 40" - 46" 73
©
Copyright 2012 Koninklijke Philips Electronics N.V.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic, mechanical,
photocopying, or otherwise without the prior permission of Philips.
Published by ER/WS 1261 BG TV Quality, the Netherlands Subject to modification EN 3122 785 19154
2012-Feb-03
EN 2 1. L11M2.1E LA Revision List
1. Revision List
Manual xxxx xxx xxxx.0 Manual xxxx xxx xxxx.3
• First release. • Chapter 2: Table 2-1 updated (added CTNs).
Manual xxxx xxx xxxx.1 Manual xxxx xxx xxxx.4

• Chapter 2: Table 2-1 updated (added CTNs). • Chapter 7: Changed PSU repair policy, see section 7.2.2.
• Chapter 10: Added PSU schematics and layout drawings.
Manual xxxx xxx xxxx.2
• Chapter 2: Table 2-1 updated (added CTNs).
2. Technical Specs, Diversity, and Connections

Index of this chapter: 2.2 Directions for Use
2.1 Technical Specifications Directions for use can be downloaded from the following
2.2 Directions for Use websites:
2.3 Connections http://www.philips.com/support
2.4 Chassis Overview http://www.p4c.philips.com
Notes:
• Figures can deviate due to the different set executions.
• Specifications are indicative (subject to change).
2.1 Technical Specifications

For on-line product support please use the links in. Here is
product information available, as well as getting started, user
manuals, frequently asked questions and software & drivers.
Table 2-1 Described Model Numbers and Diversity:
Model Number Styling Published in Power Supply Unit

40PFL5206H/12 Berlinale 3122 785 19153 272217190318
40PFL5206H/58 Berlinale 3122 785 19153 272217190318
40PFL5606H/12 Berlinale 3122 785 19150 272217190361
40PFL5606H/58 Berlinale 3122 785 19150 272217190361
40PFL5606H/60 Berlinale 3122 785 19150 272217190361
40PFL5616H/60 Berlinale 3122 785 19151 272217190361
46PFL5606H/12 Berlinale 3122 785 19152 272217190441
46PFL5606H/58 Berlinale 3122 785 19152 272217190441
Note: The given Model Numbers are subject to change.
2012-Feb-03 back to
div. table
Technical Specs, Diversity, and Connections L11M2.1E LA 2. EN 3
2.3 Connections
9 10 11 12
8 13 6 7 4
19080_002_110301.eps
110408
Figure 2-1 Connection overview (Berlinale Styling)
Note: The following connector colour abbreviations are used 4 - Ground Gnd H
(acc. to DIN/IEC 757): Bk= Black, Bu= Blue, Gn= Green,
Gy= Grey, Rd= Red, Wh= White, Ye= Yellow. 5 - Head phone (Output)
Bk - Head phone 80 - 600  / 10 mW ot
2.3.1 Side Connections
6 - HDMI: Digital Video, Digital Audio - In (optional)
1 - Common Interface
19 1
68p - See figure 10-4-14. jk 18 2
10000_017_090121.eps
2 - Cinch: Video CVBS - In, Audio - In 090428
Ye - Video CVBS 1 VPP / 75  jq
Rd - Audio R 0.5 VRMS / 10 k jq Figure 2-3 HDMI (type A) connector
Wh - Audio L 0.5 VRMS / 10 k jq
1 - D2+ Data channel j
3 - Service / UART 2 - Shield Gnd H
1 - Ground Gnd H 3 - D2- Data channel j
2 - UART_TX Transmit k 4 - D1+ Data channel j
3 - UART_RX Receive j 5 - Shield Gnd H
6 - D1- Data channel j
4 - USB2.0
8 - Shield Gnd H
1 2 3 4 10 - CLK+ Data channel j
10000_022_090121.eps 11 - Shield Gnd H
090121 12 - CLK- Data channel j
13 - Easylink/CEC Control channel jk
Figure 2-2 USB (type A) 14 - n.c.
15 - DDC_SCL DDC clock j
1 - +5V k 16 - DDC_SDA DDC data jk
2 - Data (-) jk 17 - Ground Gnd H
3 - Data (+) jk 18 - +5V j
back to 2012-Feb-03
div. table
EN 4 2. L11M2.1E LA Technical Specs, Diversity, and Connections
19 - HPD Hot Plug Detect j 9 - +5VDC +5 V j

20 - Ground Gnd H 10 - Ground Sync Gnd H
11 - Ground Red Gnd H
2.3.2 Rear Connections 12 - DDC_SDA DDC data j
13 - H-sync 0-5V j
7 - HDMI 1: Digital Video - In, Digital Audio with ARC - 14 - V-sync 0-5V j
15 - DDC_SCL DDC clock j
In/Out
19 1
18 2
11 - Audio - In: Left / Right, VGA
Gn - Audio L/R in 0.5 VRMS / 10 k jq
10000_017_090121.eps
090428
12 - EXT1: Video RGB/YC - In, CVBS - In/Out, Audio - In/Out
Figure 2-4 HDMI (type A) connector 20 2

2 - Shield Gnd H 21 1
10000_001_090121.eps
3 - D2- Data channel j 090121

5 - Shield Gnd H Figure 2-6 SCART connector
7 - D0+ Data channel j 1 - Audio R 0.5 VRMS / 1 k k
8 - Shield Gnd H 2 - Audio R 0.5 VRMS / 10 k j
9 - D0- Data channel j 3 - Audio L 0.5 VRMS / 1 k k
10 - CLK+ Data channel j 4 - Ground Audio Gnd H
11 - Shield Gnd H 5 - Ground Blue Gnd H
12 - CLK- Data channel j 6 - Audio L 0.5 VRMS / 10 k j
13 - Easylink/CEC Control channel jk 7 - Video Blue/C-out 0.7 VPP / 75  jk
14 - ARC Audio Return Channel k 8 - Function Select 0 - 2 V: INT
15 - DDC_SCL DDC clock j 4.5 - 7 V: EXT 16:9
16 - DDC_SDA DDC data jk 9.5 - 12 V: EXT 4:3 j
17 - Ground Gnd H 9 - Ground Green Gnd H
18 - +5V j 10 - n.c.
19 - HPD Hot Plug Detect j 11 - Video Green 0.7 VPP / 75  j
20 - Ground Gnd H 12 - n.c.
8 - EXT2: Video YPbPr - In, Audio - In 14 - Ground P50 Gnd H
Gn - Video - Y 1 VPP / 75 W jq 15 - Video Red/C 0.7 VPP / 75  j
Bu - Video - Pb 0.7 VPP / 75 W jq 16 - Status/FBL 0 - 0.4 V: INT
Rd - Video - Pr 0.7 VPP / 75 W jq 1 - 3 V: EXT / 75  j
17 - Ground Video Gnd H
18 - Ground FBL Gnd H
Wh - Audio - L 0.5 VRMS / 10 kW jq
19 - Video CVBS 1 VPP / 75  k
Rd - Audio - R 0.5 VRMS / 10 kW jq
20 - Video CVBS/Y 1 VPP / 75  j
21 - Shield Gnd H
9 - Cinch: Audio - Out
Rd - Audio R 0.5 VRMS / 10 k kq
13 - TV ANTENNA - In
Wh - Audio L 0.5 VRMS / 10 k kq
Signal input from an antenna, cable or satellite.
10 - PC IN:VGA
14 - Service / UART
H
1 5
10 1 - Ground Gnd
k
6
11 15 2 - UART_TX Transmit
10000_002_090121.eps 3 - UART_RX Receive j
090127
2.3.3 Bottom Connections
Figure 2-5 VGA connector
7 - HDMI1: Digital Video, Digital Audio - In

1 - Video Red 0.7 VPP / 75 W j
See 6 - HDMI: Digital Video, Digital Audio - In (optional)
2 - Video Green 0.7 VPP / 75 W j
3 - Video Blue 0.7 VPP / 75 W j
4 - n.c. 8 - EXT2: Video YPbPr - In, Audio - In
5 - Ground Gnd H See 8 - EXT2: Video YPbPr - In, Audio - In
7 - Ground Green Gnd H 13 - TV ANTENNA - In
8 - Ground Blue Gnd H See 13 - TV ANTENNA - In
2.4 Chassis Overview

Refer to 9. Block Diagrams for PWB/CBA locations.
2012-Feb-03 back to
div. table
Precautions, Notes, and Abbreviation List L11M2.1E LA 3. EN 5
3. Precautions, Notes, and Abbreviation List

Index of this chapter: 3.3.2 Schematic Notes
3.1 Safety Instructions
3.2 Warnings • All resistor values are in ohms, and the value multiplier is
3.3 Notes often used to indicate the decimal point location (e.g. 2K2
3.4 Abbreviation List indicates 2.2 k).
• Resistor values with no multiplier may be indicated with
3.1 Safety Instructions either an “E” or an “R” (e.g. 220E or 220R indicates 220 ).
Safety regulations require the following during a repair: • All capacitor values are given in micro-farads (  10-6),
• Connect the set to the Mains/AC Power via an isolation nano-farads (n  10-9), or pico-farads (p  10-12).
transformer (> 800 VA). • Capacitor values may also use the value multiplier as the
• Replace safety components, indicated by the symbol h, decimal point indication (e.g. 2p2 indicates 2.2 pF).
only by components identical to the original ones. Any • An “asterisk” (*) indicates component usage varies. Refer
other component substitution (other than original type) may to the diversity tables for the correct values.
increase risk of fire or electrical shock hazard. • The correct component values are listed on the Philips
Spare Parts Web Portal.
Safety regulations require that after a repair, the set must be
returned in its original condition. Pay in particular attention to 3.3.3 Spare Parts
the following points:
• Route the wire trees correctly and fix them with the
For the latest spare part overview, consult your Philips Spare
mounted cable clamps.
Part web portal.
• Check the insulation of the Mains/AC Power lead for
external damage.
3.3.4 BGA (Ball Grid Array) ICs
• Check the strain relief of the Mains/AC Power cord for
proper function.
• Check the electrical DC resistance between the Mains/AC Introduction
Power plug and the secondary side (only for sets that have For more information on how to handle BGA devices, visit this
a Mains/AC Power isolated power supply): URL: http://www.atyourservice-magazine.com. Select
1. Unplug the Mains/AC Power cord and connect a wire “Magazine”, then go to “Repair downloads”. Here you will find
between the two pins of the Mains/AC Power plug. Information on how to deal with BGA-ICs.
2. Set the Mains/AC Power switch to the “on” position
(keep the Mains/AC Power cord unplugged!). BGA Temperature Profiles
3. Measure the resistance value between the pins of the For BGA-ICs, you must use the correct temperature-profile.
Mains/AC Power plug and the metal shielding of the Where applicable and available, this profile is added to the IC
tuner or the aerial connection on the set. The reading Data Sheet information section in this manual.
should be between 4.5 M and 12 M.
4. Switch “off” the set, and remove the wire between the 3.3.5 Lead-free Soldering
two pins of the Mains/AC Power plug.
• Check the cabinet for defects, to prevent touching of any Due to lead-free technology some rules have to be respected
inner parts by the customer. by the workshop during a repair:
• Use only lead-free soldering tin. If lead-free solder paste is
3.2 Warnings required, please contact the manufacturer of your soldering
• All ICs and many other semiconductors are susceptible to equipment. In general, use of solder paste within
electrostatic discharges (ESD w). Careless handling workshops should be avoided because paste is not easy to
during repair can reduce life drastically. Make sure that, store and to handle.
during repair, you are connected with the same potential as • Use only adequate solder tools applicable for lead-free
the mass of the set by a wristband with resistance. Keep soldering tin. The solder tool must be able:
components and tools also at this same potential. – To reach a solder-tip temperature of at least 400°C.
• Be careful during measurements in the high voltage – To stabilize the adjusted temperature at the solder-tip.
section. – To exchange solder-tips for different applications.
• Never replace modules or other components while the unit • Adjust your solder tool so that a temperature of around
is switched “on”. 360°C - 380°C is reached and stabilized at the solder joint.
• When you align the set, use plastic rather than metal tools. Heating time of the solder-joint should not exceed ~ 4 sec.
This will prevent any short circuits and the danger of a Avoid temperatures above 400°C, otherwise wear-out of
circuit becoming unstable. tips will increase drastically and flux-fluid will be destroyed.
To avoid wear-out of tips, switch “off” unused equipment or
3.3 Notes reduce heat.
• Mix of lead-free soldering tin/parts with leaded soldering
3.3.1 General tin/parts is possible but PHILIPS recommends strongly to
avoid mixed regimes. If this cannot be avoided, carefully
• Measure the voltages and waveforms with regard to the clear the solder-joint from old tin and re-solder with new tin.
chassis (= tuner) ground (H), or hot ground (I), depending
on the tested area of circuitry. The voltages and waveforms 3.3.6 Alternative BOM identification
shown in the diagrams are indicative. Measure them in the
Service Default Mode with a colour bar signal and stereo It should be noted that on the European Service website,
sound (L: 3 kHz, R: 1 kHz unless stated otherwise) and “Alternative BOM” is referred to as “Design variant”.
picture carrier at 475.25 MHz for PAL, or 61.25 MHz for
NTSC (channel 3). The third digit in the serial number (example:
• Where necessary, measure the waveforms and voltages AG2B0335000001) indicates the number of the alternative
with (D) and without (E) aerial signal. Measure the B.O.M. (Bill Of Materials) that has been used for producing the
voltages in the power supply section both in normal specific TV set. In general, it is possible that the same TV
operation (G) and in stand-by (F). These values are model on the market is produced with e.g. two different types
indicated by means of the appropriate symbols. of displays, coming from two different suppliers. This will then
back to 2012-Feb-03
div. table
EN 6 3. L11M2.1E LA Precautions, Notes, and Abbreviation List
result in sets which have the same CTN (Commercial Type 6 = play 16 : 9 format, 12 = play 4 : 3
Number; e.g. 28PW9515/12) but which have a different B.O.M. format
number. AARA Automatic Aspect Ratio Adaptation:
By looking at the third digit of the serial number, one can algorithm that adapts aspect ratio to
identify which B.O.M. is used for the TV set he is working with. remove horizontal black bars; keeps
If the third digit of the serial number contains the number “1” the original aspect ratio
(example: AG1B033500001), then the TV set has been ACI Automatic Channel Installation:
manufactured according to B.O.M. number 1. If the third digit is algorithm that installs TV channels
a “2” (example: AG2B0335000001), then the set has been directly from a cable network by
produced according to B.O.M. no. 2. This is important for means of a predefined TXT page
ordering the correct spare parts! ADC Analogue to Digital Converter
For the third digit, the numbers 1...9 and the characters A...Z AFC Automatic Frequency Control: control
can be used, so in total: 9 plus 26= 35 different B.O.M.s can be signal used to tune to the correct
indicated by the third digit of the serial number. frequency
AGC Automatic Gain Control: algorithm that
Identification: The bottom line of a type plate gives a 14-digit controls the video input of the feature
serial number. Digits 1 and 2 refer to the production centre (e.g. box
SN is Lysomice, RJ is Kobierzyce), digit 3 refers to the B.O.M. AM Amplitude Modulation
code, digit 4 refers to the Service version change code, digits 5 AP Asia Pacific
and 6 refer to the production year, and digits 7 and 8 refer to AR Aspect Ratio: 4 by 3 or 16 by 9
production week (in example below it is 2010 week 10 / 2010 ASF Auto Screen Fit: algorithm that adapts
week 17). The 6 last digits contain the serial number. aspect ratio to remove horizontal black
bars without discarding video
information
ATSC Advanced Television Systems
Committee, the digital TV standard in
the USA
ATV See Auto TV
Auto TV A hardware and software control
system that measures picture content,
and adapts image parameters in a
dynamic way
AV External Audio Video
AVC Audio Video Controller
AVIP Audio Video Input Processor
B/G Monochrome TV system. Sound
carrier distance is 5.5 MHz
BDS Business Display Solutions (iTV)
BLR Board-Level Repair
BTSC Broadcast Television Standard
Committee. Multiplex FM stereo sound
system, originating from the USA and
used e.g. in LATAM and AP-NTSC
10000_053_110228.eps countries
110228 B-TXT Blue TeleteXT
C Centre channel (audio)
Figure 3-1 Serial number (example) CEC Consumer Electronics Control bus:
remote control bus on HDMI
3.3.7 Board Level Repair (BLR) or Component Level Repair connections
(CLR) CL Constant Level: audio output to
connect with an external amplifier
If a board is defective, consult your repair procedure to decide CLR Component Level Repair
if the board has to be exchanged or if it should be repaired on ComPair Computer aided rePair
component level. CP Connected Planet / Copy Protection
If your repair procedure says the board should be exchanged CSM Customer Service Mode
completely, do not solder on the defective board. Otherwise, it CTI Color Transient Improvement:
cannot be returned to the O.E.M. supplier for back charging! manipulates steepness of chroma
transients
CVBS Composite Video Blanking and
3.3.8 Practical Service Precautions
Synchronization
DAC Digital to Analogue Converter
• It makes sense to avoid exposure to electrical shock. DBE Dynamic Bass Enhancement: extra
While some sources are expected to have a possible low frequency amplification
dangerous impact, others of quite high potential are of DCM Data Communication Module. Also
limited current and are sometimes held in less regard. referred to as System Card or
• Always respect voltages. While some may not be Smartcard (for iTV).
dangerous in themselves, they can cause unexpected DDC See “E-DDC”
reactions that are best avoided. Before reaching into a D/K Monochrome TV system. Sound
powered TV set, it is best to test the high voltage insulation. carrier distance is 6.5 MHz
It is easy to do, and is a good service precaution. DFI Dynamic Frame Insertion
DFU Directions For Use: owner's manual
3.4 Abbreviation List DMR Digital Media Reader: card reader
0/6/12 SCART switch control signal on A/V DMSD Digital Multi Standard Decoding
board. 0 = loop through (AUX to TV), DNM Digital Natural Motion
2012-Feb-03 back to
div. table
Precautions, Notes, and Abbreviation List L11M2.1E LA 3. EN 7
DNR Digital Noise Reduction: noise The SDI signal is self-synchronizing,

reduction feature of the set uses 8 bit or 10 bit data words, and has
DRAM Dynamic RAM a maximum data rate of 270 Mbit/s,
DRM Digital Rights Management with a minimum bandwidth of 135
DSP Digital Signal Processing MHz.
DST Dealer Service Tool: special remote iTV Institutional TeleVision; TV sets for
control designed for service hotels, hospitals etc.
technicians LS Last Status; The settings last chosen
DTCP Digital Transmission Content by the customer and read and stored
Protection; A protocol for protecting in RAM or in the NVM. They are called
digital audio/video content that is at start-up of the set to configure it
traversing a high speed serial bus, according to the customer's
such as IEEE-1394 preferences
DVB-C Digital Video Broadcast - Cable LATAM Latin America
DVB-T Digital Video Broadcast - Terrestrial LCD Liquid Crystal Display
DVD Digital Versatile Disc LED Light Emitting Diode
DVI(-d) Digital Visual Interface (d= digital only) L/L' Monochrome TV system. Sound
E-DDC Enhanced Display Data Channel carrier distance is 6.5 MHz. L' is Band
(VESA standard for communication I, L is all bands except for Band I
channel and display). Using E-DDC, LPL LG.Philips LCD (supplier)
the video source can read the EDID LS Loudspeaker
information form the display. LVDS Low Voltage Differential Signalling
EDID Extended Display Identification Data Mbps Mega bits per second
(VESA standard) M/N Monochrome TV system. Sound
EEPROM Electrically Erasable and carrier distance is 4.5 MHz
Programmable Read Only Memory MHEG Part of a set of international standards
EMI Electro Magnetic Interference related to the presentation of
EPG Electronic Program Guide multimedia information, standardised
EPLD Erasable Programmable Logic Device by the Multimedia and Hypermedia
EU Europe Experts Group. It is commonly used as
EXT EXTernal (source), entering the set by a language to describe interactive
SCART or by cinches (jacks) television services
FDS Full Dual Screen (same as FDW) MIPS Microprocessor without Interlocked
FDW Full Dual Window (same as FDS) Pipeline-Stages; A RISC-based
FLASH FLASH memory microprocessor
FM Field Memory or Frequency MOP Matrix Output Processor
Modulation MOSFET Metal Oxide Silicon Field Effect
FPGA Field-Programmable Gate Array Transistor, switching device
FTV Flat TeleVision MPEG Motion Pictures Experts Group
Gb/s Giga bits per second MPIF Multi Platform InterFace
G-TXT Green TeleteXT MUTE MUTE Line
H H_sync to the module MTV Mainstream TV: TV-mode with
HD High Definition Consumer TV features enabled (iTV)
HDD Hard Disk Drive NC Not Connected
HDCP High-bandwidth Digital Content NICAM Near Instantaneous Compounded
Protection: A “key” encoded into the Audio Multiplexing. This is a digital
HDMI/DVI signal that prevents video sound system, mainly used in Europe.
data piracy. If a source is HDCP coded NTC Negative Temperature Coefficient,
and connected via HDMI/DVI without non-linear resistor
the proper HDCP decoding, the NTSC National Television Standard
picture is put into a “snow vision” mode Committee. Color system mainly used
or changed to a low resolution. For in North America and Japan. Color
normal content distribution the source carrier NTSC M/N= 3.579545 MHz,
and the display device must be NTSC 4.43= 4.433619 MHz (this is a
enabled for HDCP “software key” VCR norm, it is not transmitted off-air)
decoding. NVM Non-Volatile Memory: IC containing
HDMI High Definition Multimedia Interface TV related data such as alignments
HP HeadPhone O/C Open Circuit
I Monochrome TV system. Sound OSD On Screen Display
carrier distance is 6.0 MHz OAD Over the Air Download. Method of
I 2C Inter IC bus software upgrade via RF transmission.
I2D Inter IC Data bus Upgrade software is broadcasted in
I2S Inter IC Sound bus TS with TV channels.
IF Intermediate Frequency OTC On screen display Teletext and
IR Infra Red Control; also called Artistic (SAA5800)
IRQ Interrupt Request P50 Project 50: communication protocol
ITU-656 The ITU Radio communication Sector between TV and peripherals
(ITU-R) is a standards body PAL Phase Alternating Line. Color system
subcommittee of the International mainly used in West Europe (colour
Telecommunication Union relating to carrier = 4.433619 MHz) and South
radio communication. ITU-656 (a.k.a. America (colour carrier
SDI), is a digitized video format used PAL M = 3.575612 MHz and
for broadcast grade video. PAL N = 3.582056 MHz)
Uncompressed digital component or PCB Printed Circuit Board (same as “PWB”)
digital composite signals can be used. PCM Pulse Code Modulation
back to 2012-Feb-03
div. table
EN 8 3. L11M2.1E LA Precautions, Notes, and Abbreviation List
PDP Plasma Display Panel SWAN Spatial temporal Weighted Averaging

PFC Power Factor Corrector (or Noise reduction
Pre-conditioner) SXGA 1280 × 1024
PIP Picture In Picture TFT Thin Film Transistor
PLL Phase Locked Loop. Used for e.g. THD Total Harmonic Distortion
FST tuning systems. The customer TMDS Transmission Minimized Differential
can give directly the desired frequency Signalling
POD Point Of Deployment: a removable TS Transport Stream
CAM module, implementing the CA TXT TeleteXT
system for a host (e.g. a TV-set) TXT-DW Dual Window with TeleteXT
POR Power On Reset, signal to reset the uP UI User Interface
PSDL Power Supply for Direct view LED uP Microprocessor
backlight with 2D-dimming UXGA 1600 × 1200 (4:3)
PSL Power Supply with integrated LED V V-sync to the module
drivers VESA Video Electronics Standards
PSLS Power Supply with integrated LED Association
drivers with added Scanning VGA 640 × 480 (4:3)
functionality VL Variable Level out: processed audio
PTC Positive Temperature Coefficient, output toward external amplifier
non-linear resistor VSB Vestigial Side Band; modulation
PWB Printed Wiring Board (same as “PCB”) method
PWM Pulse Width Modulation WYSIWYR What You See Is What You Record:
QRC Quasi Resonant Converter record selection that follows main
QTNR Quality Temporal Noise Reduction picture and sound
QVCP Quality Video Composition Processor WXGA 1280 × 768 (15:9)
RAM Random Access Memory XTAL Quartz crystal
RGB Red, Green, and Blue. The primary XGA 1024 × 768 (4:3)
color signals for TV. By mixing levels Y Luminance signal
of R, G, and B, all colors (Y/C) are Y/C Luminance (Y) and Chrominance (C)
reproduced. signal
RC Remote Control YPbPr Component video. Luminance and
RC5 / RC6 Signal protocol from the remote scaled color difference signals (B-Y
control receiver and R-Y)
RESET RESET signal YUV Component video
ROM Read Only Memory
RSDS Reduced Swing Differential Signalling
data interface
R-TXT Red TeleteXT
SAM Service Alignment Mode
S/C Short Circuit
SCART Syndicat des Constructeurs
d'Appareils Radiorécepteurs et
Téléviseurs
SCL Serial Clock I2C
SCL-F CLock Signal on Fast I2C bus
SD Standard Definition
SDA Serial Data I2C
SDA-F DAta Signal on Fast I2C bus
SDI Serial Digital Interface, see “ITU-656”
SDRAM Synchronous DRAM
SECAM SEequence Couleur Avec Mémoire.
Colour system mainly used in France
and East Europe. Colour
carriers = 4.406250 MHz and
4.250000 MHz
SIF Sound Intermediate Frequency
SMPS Switched Mode Power Supply
SoC System on Chip
SOG Sync On Green
SOPS Self Oscillating Power Supply
SPI Serial Peripheral Interface bus; a
4-wire synchronous serial data link
standard
S/PDIF Sony Philips Digital InterFace
SRAM Static RAM
SRP Service Reference Protocol
SSB Small Signal Board
SSC Spread Spectrum Clocking, used to
reduce the effects of EMI
STB Set Top Box
STBY STand-BY
SVGA 800 × 600 (4:3)
SVHS Super Video Home System
SW Software
2012-Feb-03 back to
div. table
Mechanical Instructions L11M2.1E LA 4. EN 9
4. Mechanical Instructions
Index of this chapter: Notes:
4.1 Cable Dressing • Figures below can deviate slightly from the actual situation,
4.2 Service Positions due to the different set executions.
4.3 Assembly/Panel Removal (Berlinale styling)
4.4 Set Re-assembly
4.1 Cable Dressing
19150_005_110512.eps
110512
Figure 4-1 Cable dressing (40" Berlinale styling)
back to 2012-Feb-03
div. table
EN 10 4. L11M2.1E LA Mechanical Instructions
3 × tape (100 mm)

8 × tapes (80 mm)
1 × tape (25 mm)
2 × 11 mm clamp
1 × stick-on clamp
19152_001_110913.eps
110916
Figure 4-2 Cable dressing (46" Berlinale styling)
4.2 Service Positions

For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3 Assembly/Panel Removal (Berlinale styling)

Instructions below apply to the 40PFL5606H/12, but will be
similar for other models.
4.3.1 Rear Cover
Refer to Figure 4-3 to Figure 4-5 for details.

Warning: Disconnect the mains power cord before removing
the rear cover.
1. Remove screw caps [1] that cover VESA screw holes.
2. Remove all fixation screws [2], [3] that secure the rear
cover.
3. Release the bottom catches [4], [5].
4. At the indicated areas [6] the cover is secured by clips. Be
very careful with releasing those.
5. Lift the rear cover from the TV starting from the bottom [7]
and tilt it vertically [8]. Make sure that wires and flat foils are
not damaged while lifting the rear cover from the set.
2012-Feb-03 back to
div. table
2 2 2 2
1 1
6
2
2 2
8 8
3
2 2 2
1 1
2 2
2 2
7 7
19150_006_110512.eps
110512
Figure 4-3 Rear cover removal -1-
4.3.2 Small Signal Board (SSB)
Caution: it is mandatory to remount all different screws at their

original position during re-assembly. Failure to do so may result
in damaging the SSB.
1. Release the clips from both the LVDS Flat Foil connectors
that connect with the SSB.
Caution: be careful, as these are very fragile connectors!
Take the flat foils out of their connectors.
4 4 2. Unplug all other connectors.
3. Remove all fixation screws from the SSB. Note that one
19150_013_110513.eps screw is located below the upper flat foil cable.
110513
4. Take out the SSB together with side and bottom I/O
Figure 4-4 Rear cover removal -2- bracket.
5. Remove the screws between the bottom Y-Pb and L-R
audio connectors.
6. Remove the side and bottom I/O bracket from the SSB.
Note that these parts are kept in place by very fragile clips.
Release those clips gently!
4.3.3 Power Supply Unit (PSU)

original position during re-assembly. Failure to do so may result
in damaging the PSU.
1. Release the tape from the Power board cables.
2. Unplug power connectors from the SSB, as it is not
unplug-able at the PSU itself (soldered connector).
5 3. Unplug both other connectors from the PSU.
4. Remove all fixation screws from the PSU.
19150_014_110513.eps
110513
5. The PSU can be taken out of the set now.
When defective, replace the whole unit.
Figure 4-5 Rear cover removal -3-
back to 2012-Feb-03
div. table
EN 12 4. L11M2.1E LA Mechanical Instructions
4.3.4 Stand removal
1. Remove the four fixation screws.

2. Take the stand out in a downwards direction.
4.3.5 Stand bracket removal
Refer to Figure 4-6 for details.

original position during re-assembly. Be sure to put the set in
the Service Position.
1. Remove the fixation screws [1], [2]. 1 1
2. Take the Stand bracket out.
2
3 2
19150_009_110512.eps
110512
2
3 2
Figure 4-8 IR/LED/Keyboard removal
Stand Bracket 4.3.8 LED Panel

1. Remove the SSB as described earlier.
2
3 2
1 1 2. Remove the PSU as described earlier.
3. Remove the stand as described earlier.
4. Remove the stand bracket as described earlier.
5. Remove the Power switch and mains plug as described
19150_007_110512.eps
earlier and remove the plastic subframe.
110512
6. Remove the speakers.
7. Remove all tapes that secure any cable and remove the
Figure 4-6 Stand bracket removal
cables from the set.
8. Release the clips from the LVDS flat
4.3.6 Power switch and mains plug foil connector [1].
Caution: be careful, as these are very fragile cables and
Refer to Figure 4-7 for details. connectors! Take the flat foil out of it’s connector.
1. Unplug the connector from the PSU. 9. Release the metal clips [2] at the top, sides and bottom of
2. The switch and mains inlet can be removed by lifting the the panel that secure the LCD panel with the bezel and
catches with a screwdriver [1] and sliding them out [2]. remove the clips from their position. Be careful not to break
When defective, replace the power switch and mains plug the plastic catches [3] that secure the metal brackets.
assembly. 10. Lift the LED Panel from the bezel.
2
2
3
3
2
19150_010_110512.eps
19150_008_110512.eps 110512
110512
Figure 4-9 LCD Panel removal -1-

Figure 4-7 Power switch and mains plug removal
4.3.7 IR/LED/Keyboard

1. Remove the stand bracket as described earlier.
2. Remove the screws [1] that connect the IR/LED/Keyboard
to the bezel.
2012-Feb-03 back to
div. table
2 2 2 2
2 2
2 2
1
2 2
2 2
2 2 2 2
19150_011_110512.eps
110512
Figure 4-10 LCD Panel removal -2-
4.4 Set Re-assembly

To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position. See Figure 4-1.
• Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
back to 2012-Feb-03
div. table
EN 14 5. L11M2.1E LA Service Modes, Error Codes, and Fault Finding
5. Service Modes, Error Codes, and Fault Finding

Index of this chapter: Life Timer
5.1 Test Points During the life time cycle of the TV set, a timer is kept (called
5.2 Service Modes “Op. Hour”). It counts the normal operation hours (not the
5.3 Stepwise Start-up Stand-by hours). The actual value of the timer is displayed in
5.4 Service Tools SDM and SAM in a decimal value. Every two soft-resets
5.5 Software Upgrading increase the hour by + 1. Stand-by hours are not counted.
5.6 Error Codes
5.7 The Blinking LED Procedure Software Identification, Version, and Cluster
5.9 Fault Finding and Repair Tips The software ID, version, and cluster will be shown in the main
menu display of SDM, SAM, and CSM.
5.1 Test Points The screen will show: “AAAAAB-XX.YY”, where:
As most signals are digital, it will be difficult to measure • AAAAA is the chassis name: TPM61E x.yy. (Thriller) and
waveforms with a standard oscilloscope. However, several key TPM62E x.yy (Berlinale).
ICs are capable of generating test patterns, which can be • B is the region indication: E = Europe, A = AP/China, U =
controlled via ComPair. In this way it is possible to determine NAFTA, L = LATAM.
which part is defective. • XX is the main version number: this is updated with a major
change of specification (incompatible with the previous
Perform measurements under the following conditions: software version). Numbering will go from 01 - 99 and
• Service Default Mode. AA - ZZ.
• Video: Colour bar signal. - If the main version number changes, the new version
• Audio: 3 kHz left, 1 kHz right. number is written in the NVM.
- If the main version number changes, the default settings
5.2 Service Modes are loaded.
The Service Mode feature is split into four parts: • YY is the sub version number: this is updated with a minor
• Service Default Mode (SDM). change (backwards compatible with the previous
• Service Alignment Mode (SAM). versions). Numbering will go from 00 - 99.
• Customer Service Mode (CSM). - If the sub version number changes, the new version
• Computer Aided Repair Mode (ComPair). number is written in the NVM.
- If the NVM is fresh, the software identification, version,
SDM and SAM offer features, which can be used by the Service and cluster will be written to NVM.
engineer to repair/align a TV set. Some features are:
• A pre-defined situation to ensure measurements can be Display Option Code Selection
made under uniform conditions (SDM). When after an SSB or display exchange, the display option
• Activates the blinking LED procedure for error identification code is not set properly, it will result in a TV with “no display”.
when no picture is available (SDM). Therefore, it is required to set this display option code after
• Make alignments (e.g. White Tone), reset the error buffer such a repair.
(SAM). To do so, press the following key sequence on a standard RC
• Display information (“SDM” or “SAM” indication in upper transmitter: “062598” directly followed by “HOME” and “xxx”,
right corner of screen, error buffer, software version, where “xxx” is a 3 digit decimal value of the panel type: see
operating hours, options and option codes, sub menus). column “Display Code” in Table 6-5, or see sticker on the
side/bottom of the cabinet. When the value is accepted and
stored in NVM, the set will switch to Stand-by, to indicate that
The CSM is a Service Mode that can be enabled by the
the process has been completed.
consumer. The CSM displays diagnosis information, which the
customer can forward to the dealer or call centre. In CSM
mode, “CSM”, is displayed in the top right corner of the screen.
The information provided in CSM and the purpose of CSM is to:
• Increase the home repair hit rate.
Display Option
• Decrease the number of nuisance calls. Code
• Solved customers’ problem without home visit.
ComPair Mode is used for communication between a computer 39mm
and a TV on I2C /UART level and can be used by a Service PHILIPS 040
27mm
MODEL:
engineer to quickly diagnose the TV set by reading out error 32PF9968/10
PROD.SERIAL NO:
codes, read and write in NVMs, communicate with ICs and the AG 1A0620 000001
mP (PWM, registers, etc.), and by making use of a fault finding (CTN Sticker)
database. It will also be possible to up and download the
software of the TV set via I2C with help of ComPair. To do this, 10000_038_090121.eps
090819
ComPair has to be connected to the TV set via the ComPair
connector, which will be accessible through the rear of the set Figure 5-1 Location of Display Option Code sticker
(without removing the rear cover).
During this algorithm, the NVM-content must be filtered,
Note: For the new model range, a new remote control (RC) is because several items in the NVM are TV-related and not SSB
used with some renamed buttons. This has an impact on the related (e.g. Model and Prod. S/N). Therefore, “Model”
activation of the Service modes. For instance the old “MENU” and “Prod. S/N” data is changed into “See Type Plate”. In case
button is now called “HOME” (or is indicated by a “house” icon). a call centre or consumer reads “See Type Plate” in CSM
mode, he needs to look to the side/bottom sticker to identify the
5.2.1 General set, for further actions.
Next items are applicable to all Service Modes or are general.
2012-Feb-03 back to
div. table
Service Modes, Error Codes, and Fault Finding L11M2.1E LA 5. EN 15
5.2.2 Service Default Mode (SDM) • Command HOME from the user remote will enter the
normal user menu (brightness, contrast, color, etc...) with
Purpose “SDM” OSD remaining, and pressing HOME key again will
Set the TV in SDM mode in order to be able to create a return to the last status of SDM again.
predefined setting for measurements to be made. In this • To prevent the OSD from interfering with measurements in
platform, a simplified SDM is introduced (without protection SDM, command “HOME” (“STATUS” or “INFO” for NAFTA
override and without tuning to a predefined frequency). and LATAM) from the user remote will toggle the OSD
“on/off” with “SDM” OSD remaining always “on”.
Specifications • Press the following key sequence on the remote control
• Set linear video and audio settings to 50%, but volume to transmitter: “062596” directly followed by the OK button to
25%. Stored user settings are not affected. switch to SAM (do not allow the display to time out between
• All service-unfriendly modes (if present) are disabled, since entries while keying the sequence). Remarks: new RC will
they interfere with diagnosing/repairing a set. These not have I+ button, but function still remains.
service unfriendly modes are:
– (Sleep) timer. How to Exit SDM
– Blue mute/Wall paper. • Switch the set to Stand-by by pressing the standby button
– Auto switch “off” (when there is no “ident” signal). on the remote control transmitter or on the television set.
– Hotel or hospital mode. • Via a standard customer RC-transmitter: key
– Child lock or parental lock (manual or via V-chip). in “00”-sequence.
– Skipping, blanking of “Not favourite”, “Skipped” or Note: If the TV is switched “off” by a power interrupt while
“Locked” presets/channels. in SDM, the TV will show up in the last status of SDM menu
– Automatic storing of Personal Preset or Last Status as soon as the power is supplied again. The error buffer will
settings. not be cleared.
– Automatic user menu time-out (menu switches
back/OFF automatically. 5.2.3 Service Alignment Mode (SAM)
– Auto Volume levelling (AVL).
Purpose
How to Activate SDM • To modify the NVM.
To activate SDM, use the following methods: • To display/clear the error code buffer.
• Press the following key sequence on the RC transmitter: • To perform alignments.
“062596”, directly followed by the “HOME” button.
Note: It is possible that, together with the SDM, the main Specifications
menu will appear. To switch it “off”, push the “HOME” • Operation hours counter (maximum five digits displayed).
button again. • Software version, error codes, and option settings display.
After activating this mode, “SDM” will appear in the upper left • Error buffer clearing.
corner of the screen (when a picture is available). • Option settings.
• Software alignments (White Tone).
On Screen Menu • NVM Editor.
After activating SDM, the following items are displayed, • Set screen mode to full screen (all content is visible).
withìSDMî in the upper right corner of the screen to indicate
that the television is in Service Default Mode. Menu items and How to Activate SAM
explanation: To activate SAM, use one of the following methods:
• xxxxx Operating hours (in decimal). • Press the following key sequence on the remote control
• AAAAAB-XX.YY See paragraph Software Identification, transmitter: “062596”, directly followed by the “OK” button.
Version, and Cluster for the SW name definition. Do not allow the display to time out between entries while
• ERR Shows all errors detected since the last time the keying the sequence.
buffer was erased in format <xxx> <xxx> <xxx> <xxx> • Or via ComPair.
<xxx> (five errors possible). After entering SAM, the following items are displayed,
• OP Used to read-out the option bytes. Ten with “SAM” in the upper right corner of the screen to indicate
codes (in two rows) are possible. that the television is in Service Alignment Mode.
19150_012_110513.eps
110513 19080_201_110322.eps
110330
Figure 5-2 SDM menu
Figure 5-3 Example of SAM
How to Navigate
As this mode is read only, there is not much to navigate. To
switch to other modes, use one of the following methods:
back to 2012-Feb-03
div. table
Table 5-1 SAM mode overview
Main Menu Sub-menu 1 Sub-menu 2 Description

System Information Op Hour This represents the life timer. The timer counts normal
operation hours, but does not count Stand-by hours.
Main SW ID e.g. “TPM61E 1.071C” See paragraph Software Identification, Version, and Cluster for
the SW name definition.
ERR e.g. “000 000 000 000 000” Shows all errors detected since the last time the buffer was
erased. Five errors possible.
OP1 e.g. “012 004 192 002 184 032 007 030” Used to read-out the option bytes. See paragraph 6.4 Option
OP2 e.g. “056 023 000 106 064 000 000 122” Settings in the Alignments section for a detailed description.
Ten codes are possible.
Clear Press [OK] to clean the Error Codes immediately Erases the contents of the error buffer. Select this menu item
and press the MENU RIGHT key on the remote control. The
content of the error buffer is cleared.
RGB Align Warm R Gain To align the White Tone. See
G Gain paragraph 6.3 Software Alignments in the Alignments section
for a detailed description
B Gain
Normal R Gain
G Gain
B Gain
Cool R Gain
G Gain
B Gain
Store Store the RGB value
NVM editor Address Select and fill the NVM address
Value Select and fill the NVM value
Store Store the value in the address
Upload to USB Copy Channel List to USB To upload several settings from the TV to an USB stick
Copy NVM to USB
Copy Readable Info to USB
Copy Edid to USB
Download from USB Copy Channel List to USB To download several settings from the USB stick to the TV
Copy NVM to USB
Copy Readable Info to USB
Copy Edid to USB
Initialize NVM Press [OK] to Initialize NVM immediately To initialize a (corrupted) NVM. Be careful, this will erase all
settings.
EDID Write Enable Press [OK] to enable EDID writable immediately Enable EDID writable
Service Data Tpye Number Press [OK] use key pad edit type number Use Key pad to edit several service data
immediately
Production Number Press [OK] use key pad edit production number
immediately
12NC SSB Press [OK] use key pad edit SSB immediately
12NC PSU Press [OK] use key pad edit PSU immediately
12NC Display Press [OK] use key pad edit display immediately
Clear OAD Version Press [OK] to clean OAD Version immediately Clean OAD Version
How to Navigate How to Exit SAM

• In the SAM menu, select menu items with the UP/DOWN Use one of the following methods:
keys on the remote control transmitter. The selected item • Switch the set to STANDBY by pressing the mains button
will be indicated. When not all menu items fit on the screen, on the remote control transmitter or the television set..
use the UP/DOWN keys to display the next/previous menu • Via a standard RC-transmitter, key in “00” sequence.
items. Note: When the TV is switched “off” by a power interrupt while
• With the “LEFT/RIGHT” keys, it is possible to: in SAM, the TV will show up in “normal operation mode” as
– (De) activate the selected menu item. soon as the power is supplied again. The error buffer will not be
– (De) activate the selected sub menu. cleared.
– Change the value of the selected menu item.
• When you press the HOME button twice while in top level 5.2.4 Customer Service Mode (CSM)
SAM, the set will switch to the normal user menu (with the
SAM mode still active in the background). To return to the
Purpose
SAM menu press the HOME button. The Customer Service Mode shows error codes and
• The “HOME” key from the user remote will toggle the OSD
information on the TV's operation settings.The call centre can
“on/off” with “SAM” OSD remaining always “on”.
instruct the customer (by telephone) to enter CSM in order to
• Press the following key sequence on the remote control identify the status of the set.This helps the call centre to
transmitter: ì062596î directly followed by the HOME button
diagnose problems and failures in the TV set before making a
to switch to SDM (do not allow the display to time out
service call.
between entries while keying the sequence). Remarks: The CSM is a read-only mode; therefore, modifications are not
new RC will not have I+ button, but function still remain.
possible in this mode.
How to Store SAM Settings

Specifications
To store the settings changed in SAM mode (except the • Ignore “Service unfriendly modes”.
RGB ALIGN settings), leave the top level SAM menu by using
• Line number for every
the POWER button on the remote control transmitter or the
line (to make CSM language independent).
television set. The mentioned exceptions must be stored • Set the screen mode to full
separately via the STORE button.
screen (all contents on screen is visible).
2012-Feb-03 back to
div. table
• After leaving the Customer Service Mode, the original • 1.5 Option Code 2 Gives the option codes of option group
settings are restored. 2 as set in SAM.
• Possibility to use “CH+” or “CH-” for channel surfing, or • 1.6 SSB Gives an identification of the SSB as stored in
enter the specific channel number on the RC. NVM. Note that if an NVM is replaced or is initialized after
corruption, this identification number has to be re-written to
How to Activate CSM NVM. This identification number is the 12NC number of the
To activate CSM, press the following key sequence on a SSB.
standard remote control transmitter: “123654” • 1.7 Display 12NC NVM read/write.
(do not allow the display to time out between entries while • 1.8 PSU 12NC NVM read/write.
keying the sequence). After entering the Customer Service • 2.1 Current Main SW Displays the built-in main software
Mode, the following items are displayed. version. In case of field problems related to software,
software can be upgraded. As this software is consumer
Note: Activation of the CSM is only possible if there is no (user) upgradeable, it will also be published on the Internet.
menu on the screen! • 2.2 Standby SW Displays the built-in stand-by processor
software version. Upgrading this software will be possible
via USB.
• 2.3 Panel Code Displays the panel ID number.
• 2.4 NVM version Detects and displays NVM version.
• 3.1 Signal Quality/Present Analog/digital signal strength.
• 3.2 Child lock Not active / active. This is a combined item
for locks. If any lock (channel lock, parental lock) is active,
the item shall show “active”.
• 3.3 HDCP keys Indicates if the HDMI keys (or HDCP keys)
are valid or not. In case these keys are not valid and the
customer wants to make use of the HDMI functionality, the
SSB has to be replaced.
19080_203_110322.eps
110330
How to Navigate
By means of the “CURSOR-DOWN/UP” knob (or the scroll
Figure 5-4 CSM Menu [1/3] wheel) on the RC-transmitter, can be navigated through the
menus.
How to Exit CSM

To exit CSM, use one of the following methods.
• Press the HOME button on the remote control transmitter.
• Press the POWER button on the remote control
transmitter.
• Press the POWER button on the television set.
19080_204_110322.eps
110330
Figure 5-5 CSM Menu [2/3]
19080_205_110322.eps
110330
Figure 5-6 CSM Menu [3/3]
Contents of CSM
• 1.1 Set Type This information is very helpful for a
helpdesk/workshop as reference for further diagnosis. In
this way, it is not necessary for the customer to look at the
rear of the TV-set. Note that if an NVM is replaced or is
initialized after corruption, this set type has to be re-written
to NVM.
• 1.2 Production code Displays the production
code (the serial number) of the TV. Note that if an NVM is
replaced or is initialized after corruption, this production
code has to be re-written to NVM.
• 1.3 Installation date Indicates the date of the first
installation of the TV. This date is acquired via time
extraction.
• 1.4 Option Code 1 Gives the option codes of option group
1 as set in SAM.
back to 2012-Feb-03
div. table
5.3 Stepwise Start-up
Standby Soft Mode

Command Received,
previously in Standby Switch
Soft Mode (Power tact Off(Mains
Standby Power Plug)
switch)
Digital Digital
background background
tasks started tasks completed
TV Wakeup
commands
Received
(TV Wakeup Standby
keys) commands Swith On,
Semi-
previously in
Received (RC Standby Standby/Semi-
Standby key) Standby (Mains
Power Plug)
Standby
Standby Soft Mode Soft Mode
Command Received, Command Switch Off (Mains
previously in Standby Received Power Plug)
TV Wakeup Soft Mode (Power (Power tact
commands tact switch) switch)
Received
(TV Wakeup Switch Off
keys) (Mains Power
Switch On, previously Plug)
in Power On Mode Standby Power Off
Power On (Power tact switch) Soft Mode Swith On,
previously in
Standby Soft Mode Standby Soft Mode
Command Received, (Mains Power Plug)
(Power tact switch)
Switch Off (Mains

Power Plug) Swith On,previously in
TV Operation Mode
(Mains Power Plug)
19080_206_110323.eps
110401
Figure 5-7 Stepwise Start-up
2012-Feb-03 back to
div. table
5.4 Service Tools

Note: When you encounter problems, contact your local
5.4.1 ComPair support desk.
Introduction Additional cables for VCOM Alignment

ComPair (Computer Aided Repair) is a Service tool for Philips • ComPair/I2C interface cable: 3122 785 90004.
Consumer Electronics products. and offers the following: • ComPair/VGA adapter cable: 9965 100 09269.
1. ComPair helps to quickly get an understanding on how to
repair the chassis in a short and effective way. Note: When you encounter problems, contact your local
2. ComPair allows very detailed diagnostics and is therefore support desk.
capable of accurately indicating problem areas. No
knowledge on I2C or UART commands is necessary, 5.5 Software Upgrading
because ComPair takes care of this.
3. ComPair speeds up the repair time since it can 5.5.1 Description
automatically communicate with the chassis (when the µP
is working) and all repair information is directly available.
It is possible for the user to upgrade the main software via the
4. ComPair features TV software up possibilities. USB port. This allows replacement of a software image in a
stand alone set. A description on how to upgrade the main
Specifications software can be found in the DFU or on the Philips website.
ComPair consists of a Windows based fault finding program
and an interface box between PC and the (defective) product. 5.5.2 Introduction
The ComPair II interface box is connected to the PC via an
USB cable. For the TV chassis, the ComPair interface box and
Philips continuously tries to improve its products, and it’s
the TV communicate via a bi-directional cable via the service
connector(s). recommend that the TV software is updated when updates are
available. Software update files can be obtained from the
The ComPair fault finding program is able to determine the
dealer or can be downloaded from the following websites:
problem of the defective television, by a combination of
automatic diagnostics and an interactive question/answer http://www.philips.com/support
procedure.
Preparing a portable memory for software upgrade
The following requirements have to be met:
How to Connect
This is described in the chassis fault finding database in 1. A personal computer connected to the Internet.
2. An archive utility that supports the ZIP-format (e.g. WinZip
ComPair.
for Windows or Stufflt for Mac OS).
3. A USB flash drive (preferably empty).
TO TV
TO TO TO
UART SERVICE
CONNECTOR
I2C SERVICE
CONNECTOR
UART SERVICE
CONNECTOR
Note:
1. Only FAT/DOS-formatted flash drives are supported.
2. Only use software update files that can be found on the
ComPair II
Multi
function
http://www.philips.com/support web site.
RC in RC out
Optional Power Link/ Mode

5.5.3 Check the current TV software version
Switch Activity I2C RS232 /UART
Before starting the software upgrade procedure, it is advised to

check that what the current TV software:
PC
1. Press the “1 2 3 6 5 4” button on the remote control to enter
the CSM mode.
2. Use the up/down cursor keys to select “Current Main
Software”.
If the current software version of the TV is the same as the
ComPair II Developed by Philips Brugge latest update file found on http://www.philips.com/support, it is
Optional power not necessary to update the TV software.
HDMI 5V DC
I2C only
5.5.4 Download the latest software

10000_036_090121.eps
091118
1. Point the web browser to http://www.philips.com/support.
Figure 5-8 ComPair II interface connection 2. Find information and software related to the TV.
3. Select the latest software update file and download it to the
Caution: It is compulsory to connect the TV to the PC as PC.
shown in the picture above (with the ComPair interface in 4. Insert a USB flash drive into one of the USB ports of the
between), as the ComPair interface acts as a level shifter. If PC.
one connects the TV directly to the PC (via UART), ICs can be 5. Decompress the downloaded ZIP file and copy the
blown! “autorun.upg” to the root directory of the USB flash drive.
How to Order 5.5.5 Update the TV software

ComPair II order codes:
• ComPair II interface: 3122 785 91020. 1. Insert mains power and wait for system to boot completely.
• Software is available via the Philips Service web portal. 2. Insert the USB flash drive that contains the software
• ComPair UART interface cable for TPM6.1x xx. update files.
(using 3.5 mm Mini Jack connector for Thriller): 3122 785 3. The TV will detect the USB flash drive automatically. Then
90630. a window jumps out as Figure 5-9.
(using 3.5 mm Mini Jack connector for Berlinale): 9965 100 Note: If the USB flash drive is not detected after power up,
07325. disconnect it and re-insert it.
back to 2012-Feb-03
div. table
4. Select [Update] and press OK. See Figure 5-9. 5.5.6 Content and Usage of the One-Zip Software File
5. To proceed, In next menu select [Start] and press OK to
start software updates. See Figure 5-10. Below you find a content explanation of the One-Zip file, and
6. Upgrading will now begins and the status of the updating instructions on how and when to use it. Only files that are
progress will be displayed. relevant for Service are mentioned here.
7. When the TV software is updated. Remove your USB flash • EDID_clustername.zip: Contains the EDID content of the
drive, then select [Restart] and press OK to restart the different EDID NVMs. See ComPair for further instructions.
TV.See Figure 5-11. • FUS_clustername_version.zip: Contains the
“autorun.upg” which is needed to upgrade the TV main
software and the software download application.
• NVM_clustername_version.zip: Default NVM content.
Must be programmed via ComPair.
5.5.7 How to Copy NVM Data to/from USB
When copying data to and from a USB memory stick, the folder
“repair” is used. When inserting an empty USB memory stick,
and downloading data to the stick, the TV will create this folder.
When sending data from a USB memory stick to a TV, the
intended data must be available in the “repair” folder.
Note that when copying EDID data to the TV, all necessary
19080_207_110324.eps EDID files must be in this folder.
110324
5.6 Error Codes

Figure 5-9 Update the TV software [1/3]
5.6.1 Introduction
Error codes are required to indicate failures in the TV set. In

principle a unique error code is available for every.
• Activated (SW) protection.
• Failing I2C device.
• General I2C error.
The last five errors, stored in the NVM, are shown in the
Service menu’s. This is called the error buffer.
The error code buffer contains all errors detected since the last
time the buffer was erased. The buffer is written from left to
right. When an error occurs that is not yet in the error code
buffer, it is displayed at the left side and all other errors shift one
position to the right.
19080_208_110324.eps An error will be added to the buffer if this error differs from any
110324 error in the buffer. The last found error is displayed on the left.
An error with a designated error code never leads to a deadlock
Figure 5-10 Update the TV software [2/3] situation. It must always be diagnosable
(e.g. error buffer via OSD or blinking LED or via ComPair).
In case a failure identified by an error code automatically
results in other error codes (cause and effect), only the error
code of the MAIN failure is displayed.
Errors code information:

• Error 000: No problem.
• Error 011: I2C bus error. When this error occurs, the TV will
not start up due to the blocked bus.
• Error 012: Tuner error. There is no I2C communication
towards the tuner after start-up.
• Error 013: Panel VCC error. This voltage is made in the
power supply and results in protection in case of absence.
19080_209_110324.eps
5.6.2 How to Read the Error Buffer
110324
You can read the error buffer in three ways:
Figure 5-11 Update the TV software [3/3] • On screen via the SAM/SDM/CSM (if you have a picture).
Example:
Note: – ERROR: 0 0 0 0 0: No errors detected.
• Do not remove the USB flash drive during the software – ERROR: 6 0 0 0 0: Error code 6 is the last and only
update. detected error.
• If a power failure occurs during the update, do not remove – ERROR: 9 6 0 0 0: Error code 6 was detected first and
the USB flash drive from the TV. The TV will continue the error code 9 is the last detected (newest) error.
software update as soon as the power comes up again. • Via the blinking LED procedure
• If an error occurs during the update retry the procedure or (when you have no picture). See paragraph
contact the dealer. 5.7 The Blinking LED Procedure.
• We do not recommend downgrading to an older version. • Via ComPair.
• Once the upgrade is finished, use the PC to remove the TV
software from the USB portable memory.
2012-Feb-03 back to
div. table
5.6.3 Error codes Caution:

• Do not change these, without understanding the function of
Errors code information: each setting, because incorrect NVM settings may
• Error 000: No problem. seriously hamper the correct functioning of the TV set!
• Error 011: I2C bus error. When this error occurs, the TV will • Always write down the existing NVM settings, before
not start up due to the blocked bus. changing the settings. This will enable you to return to the
• Error 012: Tuner error. There is no I2C communication original settings, if the new settings turn out to be incorrect.
towards the tuner after start-up.
• Error 013: Panel VCC error. This voltage is made in the 5.9.2 Load Default NVM Values
power supply and results in protection in case of absence.
It is possible to upload the default values to the NVM with
5.6.4 How to Clear the Error Buffer ComPair in case the SW is changed, the NVM is replaced with
a new (empty) one, or when the NVM content is corrupted.
The error code buffer is cleared in the following cases: After replacing an EEPROM (or with a defective/no EEPROM),
• By using the CLEAR command in the SAM menu. default settings should be used to enable the set to start-up and
• By using the following key sequence on the remote control allow the Service Default Mode and Service Alignment Mode to
transmitter: “062599” directly followed by the OK button. be accessed.
• If the contents of the error buffer have not changed for 50
hours, the error buffer resets automatically. 5.9.3 No Picture
Note: If you exit SAM by disconnecting the mains from the
television set, the error buffer is not reset. When you have no picture, first make sure you have entered
the correct display code. See paragraph 6.4 Option Settings for
5.7 The Blinking LED Procedure the instructions. See also Table 6-5.
5.7.1 Introduction 5.9.4 Unstable Picture via HDMI input
The software is capable of identifying different kinds of errors. Check (via ComPair) if HDMI EDID data is properly
Because it is possible that more than one error can occur over programmed.
time, an error buffer is available, which is capable of storing the
last five errors that occurred. This is useful if the OSD is not 5.9.5 No Picture via HDMI input
working properly.
Errors can also be displayed by the blinking LED procedure.
Check if HDCP key is valid. This can be done in CSM.
The method is to repeatedly let the front LED pulse with as
many pulses as the error code number, followed by a period of
1.5 seconds in which the LED is “off”. Then this sequence is 5.9.6 TV Will Not Start-up from Stand-by
repeated.
Example (1): error code 4 will result in four times the sequence Possible Stand-by Controller failure. Reflash the SW.
LED “on” for 0.25 seconds / LED “off” for 0.25 seconds. After
this sequence, the LED will be “off” for 1.5 seconds. Any RC 5.9.7 Audio Amplifier
command terminates the sequence. Error code LED blinking is
in red color. The Class D-IC U6006 has a powerpad for cooling. When the
Example (2): the content of the error buffer is “12 9 6 0 0” After IC is replaced it must be ensured that the powerpad is very well
entering SDM, the following occurs. pushed to the PWB while the solder is still liquid. This is needed
• 1 long blink of 5 seconds to start the sequence. to insure that the cooling is guaranteed, otherwise the Class
• 12 short blinks followed by a pause of 1.5 seconds. D-IC could break down in short time.
• 9 short blinks followed by a pause of 1.5 seconds.
• 6 short blinks followed by a pause of 1.5 seconds. 5.9.8 CSM
• 1 long blink of 1.5 seconds to finish the sequence.
• The sequence starts again with 12 short blinks.
When CSM is activated and there is a USB memory stick
connected to the TV, the software will dump the complete CSM
5.7.2 Displaying the Entire Error Buffer content to the USB memory stick. The file (Csm.txt) will be
saved in the root of the USB memory stick.
Additionally, the entire error buffer is displayed when Service
Mode “SDM” is entered. 5.9.9 Loudspeakers
5.8 Repair Policy Power Supply Units Make sure that the volume is set to minimum during
All power supply units should be repaired. Detailed info is
disconnecting the speakers in the ON-state of the TV. The
available in section 7.2.2. audio amplifier can be damaged by disconnecting the speakers
during ON-state of the set!
5.9 Fault Finding and Repair Tips
Note:
5.9.10 Display option code
• It is assumed that the components are mounted correctly
with correct values and no bad solder joints.
Attention: In case the SSB is replaced, always check the Panel
• Before any fault finding actions, check if the correct options
ID in SAM, even when picture is available. Performance with
are set.
the incorrect display option code can lead to unwanted
side-effects for certain conditions.
5.9.1 NVM Editor
5.9.11 Power Supply Unit

In some cases, it can be convenient if one directly can change
the NVM contents. This can be done with the “NVM Editor” in
SAM mode. With this option, single bytes can be changed. For fault finding tips, refer to section 7.2.2.
back to 2012-Feb-03
div. table
EN 22 6. L11M2.1E LA Alignments
6. Alignments
Index of this chapter: 6.3.2 RGB Alignment
6.1 General Alignment Conditions
6.2 Hardware Alignments Before alignment, set the picture as follows:
6.3 Software Alignments
Picture Setting
6.4 Option Settings
Contrast 100
6.5 Reset of Repaired SSB
Brightness 50
Colour 0
6.1 General Alignment Conditions Light Sensor off
Perform all electrical adjustments under the following Picture Format unscaled
conditions: Pixel Plus HD > Dynamic Contrast off
• Power supply voltage: 90 - 264 VAC, 50/ 60  3 Hz. Pixel Plus HD > Dynamic Backlight off
• Connect the set to the mains via an isolation transformer Pixel Plus HD > Colour Enhancement off
with low internal resistance. Pixel Plus HD > Gamma 0
• Allow the set to warm up for approximately 15 minutes.
• Measure voltages and waveforms in relation to correct White Tone Alignment:
ground (e.g. measure audio signals in relation to • Activate SAM.
AUDIO_GND). • Select “RGB Align.“ and choose a color temperature.
Caution: It is not allowed to use heat sinks as ground. • Use a 90% white screen as input signal to the HDMI
• Test probe: Ri > 10 M, Ci < 20 pF. connector with a format of 720p50 (if a Quantum Data
• Use an isolated trimmer/screwdriver to perform generator is used, select the “GreysAll” test pattern and set
alignments. to the level of 230).
6.2 Hardware Alignments In case you have a color analyzer:

Not applicable. • Measure with a calibrated (phosphor- independent) colour
analyser (e.g. Minolta CA-210) in the centre of the screen.
6.3 Software Alignments Consequently, the measurement needs to be done in a
Put the set in SAM mode (see Chapter 5. Service Modes, Error dark environment.
Codes, and Fault Finding). The SAM menu will now appear on • Adjust the correct x,y coordinates (while holding one of the
the screen. Select ALIGNMENTS and go to one of the sub White point registers R, G or B on max. value) by means of
menus. The alignments are explained below. decreasing the value of one or two other white points to the
The following items can be aligned: correct x,y coordinates (see Table 6-1 White D alignment
• White point. values when you use a Minolta CA-210). Tolerance:
Minolta CA-210: dx, dy:  0.005 for “Normal” and “Cool”,
To store the data: dx, dy:  0.008 for “Warm”; Minolta CA-200: dx, dy:  0 for
• Press OK on the RC before the cursor is moved to the “Normal” and “Cool”, dx, dy:  0.003 for “Warm”.
left • Repeat this step for the other colour temperatures that
• In main menu select “Store” and press OK on the RC need to be aligned.
• Switch the set to stand-by mode. • “Store” the values before exiting SAM.
For the next alignments, supply the following test signals via a Table 6-1 White D alignment values when you use a
video generator to the RF input:
Minolta CA-210
• EU/AP-PAL models: a PAL B/G TV-signal with a signal
strength of at least 1 mV and a frequency of 475.25 MHz
Value Cool (9780 K) Normal (8290 K) Warm (6240 K)
• US/AP-NTSC models: an NTSC M/N TV-signal with a
x 0.279 0.289 0.316
signal strength of at least 1 mV and a frequency of
y 0.297 0.311 0.344
61.25 MHz (channel 3).
• LATAM models: an NTSC M TV-signal with a signal
strength of at least 1 mV and a frequency of 61.25 MHz Table 6-2 White D alignment values when you use a
(channel 3). Minolta CA-200
6.3.1 Tuner Adjustment (RF AGC Take Over Point) Value Cool (11000 K) Normal (9000 K) Warm (6500 K)
x 0.276 0.287 0.313
Purpose: To keep the tuner output signal constant as the input y 0.282 0.296 0.329
signal amplitude varies.
If you do not have a colour analyser, you can use the default
No alignment is necessary, as the AGC alignment is done values. This is the next best solution. The default values are
automatically. average values coming from production (statistics).
• Set the RED, GREEN and BLUE default values per
temperature according to the values in the “Tint settings”
table.
• When finished, “Store” the values before exiting SAM.
Table 6-3 Tint settings 40"
Colour Temp. R G B
Cool 128 119 81
Normal 122 128 121
Warm 110 121 128
2012-Feb-03 back to
div. table
A lig n m e n ts L11M2.1E LA 6. EN 23
Table 6-4 Tint settings 46"
Colour Temp. R G B
Cool 115 128 119
Normal 121 128 105
Warm 128 123 68
6.4 Option Settings
6.4.1 Option Codes
The option codes come with the software and cannot be

changed.
6.4.2 Display Code Overview
In SAM, after resetting the Panel ID, restart the set

immediately.
Table 6-5 Display code overview
CTN Panel Type Panel ID

40PFL5x06H/12 LK400D3LB83 130
40PFL5x06H/58 LK400D3LB83 130
40PFL56x6H/60 LK400D3LB83 130
46PFL5606H/12 LK460D3LB93 371
46PFL5606H/58 LK460D3LB93 371
6.5 Reset of Repaired SSB

A very important issue towards a repaired SSB from a Service
repair shop (SSB repair on component level) implies the reset
of the NVM on the SSB.
A repaired SSB in Service should get the service Set type
“00PF0000000000” and Production code “00000000000000”.
Also the virgin bit is to be set. To set all this, you can use the
ComPair tool or use the “NVM editor” and “Dealer options”
items in SAM (do not forget to “store”).
After a repaired SSB has been mounted in the set (set repair
on board level), the type number (CTN) and production code of
the TV has to be set according to the type plate of the set. For
this, you can use the NVM editor in SAM. The loading of the
CTN and production code can also be done via ComPair
(Model number programming).
In case of a display replacement, reset the “Operation hours

display” to “0”, or to the operation hours of the replacement
display.
back to 2012-Feb-03
div. table
EN 24 7. L11M2.1E LA C ir c u it D e s c r ip tio n s
7. Circuit Descriptions
Index of this chapter: 7.1 Introduction
7.1 Introduction The L11M2.1E LA platform has the 5000 series Berlinale
7.2 Power Supply styling. As chipset is used the MT5366/MT5135. It combines a
7.3 Circuit Description transport de-multiplexer, a high definition video decode, an
AC3 decode, a dual-link LVDS/mini-LVDS transmitter, and an
Notes: NTSC/PAL/SECAM TV decoder with a 3D comb filter
• Only new circuits (circuits that are not published recently) (NTSC/PAL).
are described.
• Figures can deviate slightly from the actual situation, due 7.1.1 Implementation
to different set executions.
• For a good understanding of the following circuit Key components of this chassis are:
descriptions, please use the wiring, block (see chapter • MT5366CVGG System-On-Chip (SOC) TV Processor
9. Block Diagrams) and circuit diagrams (see chapter • TDTK-G731D Tuner (DVB T/C, analogue)
10. Circuit Diagrams and PWB Layouts).Where necessary, • MT5135AE DVB T/C demodulator
you will find a separate drawing for clarification. • TMDS351PAG HDMI Switch for 5000 Berlinale series
• TPA6132A2RTER Earphone R/L output
• STA339BWTR Audio amplifier
• MAX17113ET Multi DC/DC
• MAX9668ETP GAMMA
• MAX17119ETI Level shifter for 5000 Berlinale series.
7.1.2 L11M2.1E Architecture Overview
For details about the chassis block diagrams refer

to chapter 9. Block Diagrams. An overview of the L11M2.1E
architecture can be found in Figure 7-1.
CI c ar d s l o t
DDR2 1GHz NA ND Fl as h
(CAM)
128 MB x 2 128 MB
RF CI/CI+
Tuner Tuner I2C DB V-T/C

Demodulator
CI + con trol ler SP I
TS
SPD I F Ou t
MT5135
DVB -T/C m o d el
EDID EDID
DIF +/-
EDID
MT5366 UART ( ISP & Factory alignment)
24C02 24C02 24C02 MCU ARM1 1 Head p h o n e A m p

Headphone
MPEG/video/audio TPA6132/
HDMI 1 ARC HDMI
HDMI 2 SWITCH decoder
HDMI 3 TMDS 351 A u d i o P r e- A m p
Scaling S CA RT 1 L/ R o u t
NJM4580
NVM System I2C Video enhancement
24C128 3D comb I2S A u d i o A MP
Speakers
YPbPr × 1 LVDS Transmitter A u d i o I 2C STA339BWTR
Analog Video inputs :
Full S CART × 1
HDMI 1.4
PC VGA
ADC
EDID
24C02 H.264
T-con IC
Analog Audio inputs : Audio R/L of CVI
mini LVDS Transmitter
Audio R/L of SCART1
Sawless ATD build-in
Audio R/L of PC/ DVI
L VD S Pan el (50 Hz)
USB x 1 T-con
Touch Key pad

RC
Light sensor
19150_015_110513.eps
110513
Figure 7-1 Architecture of Berlinale xxPFL5xx6H/xx sets
2012-Feb-03 back to
div. table
Circuit Descriptions L11M2.1E LA 7. EN 25
7.1.3 SSB Cell Layout Berlinale
COMMON INTERFACE
DDR2
MT5366
SERVICE
CONNECTOR
ANALOG I/O
DC/DC
DIGITAL I/O
TUNER
AUDIO CLASS - D
HDMI SWITCH
DIGITAL I/O
ANALOG I/O
19080_232_110407.eps
110407
Figure 7-2 Berlinale SSB layout cells (top view)
back to 2012-Feb-03
div. table
EN 26 7. L11M2.1E LA Circuit Descriptions
7.2 Power Supply
7.2.1 Introduction
The output voltages to the chassis are:

• VSTB (+3.3 V; stand-by mode)
• VSSB (+12.3 V; on-mode)
• VSND (+24.5 V; audio circuit).
7.2.2 Connector Overview, Block Diagram and Fault Finding
Table 7-1 Connector overview
Connector
no. 1308 1316 - 1319 1M95
Descr. Mains Display Description PSU to SSB
Pin CN1 CN2 - CN3 CN4
1 N Anode 1+ LED input 3V3stdby
2 L n.c. - Standby
3 - Cathode 1- LED output GND1
4 - n.c. - GND1
5 - Anode 2+ LED input +12V
6 - n.c. - +12V
7 - Cathode 2- LED output +Vsnd
8 - n.c. -* GND_SND
9 - Anode 3+ LED input * BL-ON-OFF
10 - n.c. -* BL-DIM1(Vsync)
11 - Cathode 3- LED output * BL-I-CTRL
12 - n.c. -* POK
13 - Anode 4+ LED input * +24V (AL2_DVBS)
14 - n.c. -* GND1
15 - Cathode 4- LED output * -
Note: * optional
BL Driver 1
Line Back Light
filter PFC Resonant
converter BL Driver 2
ACin
198 V - 264 V Diode
VSSB
90 V - 276 V bridge
STBY VSTB Regulator VSND
19132_012_111221.eps
111221
Figure 7-3 Block diagram
2012-Feb-03 back to
div. table
Check First step Second step
Normal operation Check the fuse (F101)
Apply the mains voltage (ACin) Check the Standby voltage Check the entire block (PC102, VCC, etc.)
at C306: measure 3.3 V
Check the PFC voltage at C644

PFC present: measure 380 V to 400 V
Check the entire block (VCC, ICs, etc.)
Pull the Standby pin to LOW (GND) PFC not present: measure ACin × 2
Check the main supply at C208: measure 12.3 V Check the entire block (VCC, ICs, etc.)
Check the audio supply at C233: measure 24.5 V
Pull the BL_ON_OFF pin to HIGH (3.3 V) Allow the power supply to start-up a few times No turn on
Check the reference voltage of the

LED Driver (U401): measure approximately 12 V
19132_013_111221.eps
111222
Figure 7-4 Test instructions
Following checks have to be performed:

• check fuse (F101) DC POWER INPUT
TP7011
TP7004
TP7002
TP7001
TP7005
TP7006
TP7007
TP7003
• standby check VSTB (C306), measure 3.3 V

CN7001
• PFC voltage check (C644), measure 380 - 400 V; if no PFC CONN
applied, measure 311 @ 220 V 1

2
INVERTER_ON_OFF
BRIGHT_ADJ
• multi-level check VSSB (C208), measure 12.3 V 3
4
+12V
5 R7005 0R05 4A 1/4W
• multi-level check VSND (C233), measure 24.5 V 6
7
• reference voltage check (U401), measure 12 V (appr.). 8 R7006 0R05 4A 1/4W
+24V
9
10 R7009 100OHM1/16W STANDBY
11 STB_PWR5V
12
13
SAFETY INSTRUCTION C7007
NC/22uF 10V
Replace safety components, indicated by the symbol h, only R7010

10KOHM +-5% 1/8W
by components identical to the original ones. Any other

component substitution (other than original type) may increase
risk of fire or electrical shock hazard. 19080_215_110325.eps
110325
7.3 Circuit Description Figure 7-5 System power
7.3.1 System power

7.3.2 Digital/Analog power
The main board power is received at connector CN7001 from

The DVDD3V3 and AVDD3V3 are from U7005 (G1084), it can
the power board, to receive the power and other signals from
provide 5 A output current. R7013/FB7006 are for power
the PSU. See Table 7-2 for the correct pinning, For the shown
measurement. FB7006 also is for filtering.
test points refer to Figure 7-5.
DIGITAL/ANALOG POWER DVDD3V3/AVDD3V3 form +5V_SW
Table 7-2 Connector CN7001 overview
+5V_SW
DVDD3V3 AVDD3V3
2
FB7005
Item Pin Description 220R/2000mA
R7013 FB7006
0R05 4A 1/4W 220R/2000mA
U7005 G1084TU3UF
1 1 INVERTER_ON_OFF, Inverter board Vout
1
3 2 1 2
VIN VOUT
control (Low: ON, High: OFF)
ADJ/GND
100uF 16V + C7028

100N 16V
2 2 BRIGHT_ADJ, Inverter bright PWM C7027
RB
R7020
130R 1%
control (Max: 0V, Min: 3V3)

1
+ 100uF 16V
C7023 C7029
100N 16V C7022
10uF 10V
3 3, 4 +12V Supply
R7021
4 5, 6, 7 Ground RA 220R 1%
5 8, 9 +24V Supply
6 10 STANDBY, Standby 19080_216_110325.eps
control (High: Normal, Low: Stand by) 110401
7 11, 12 STB_PWR5V, +5VSB Supply
8 13 LED ON, LED on power board need a signal to control it by Figure 7-6 Digital/Analog power
panel turn on needed
7.3.3 Tuner power
The tuner power is derived from +12V by U7001 (AS7805), the

power should not drop below 4.75 V for the LG tuner, but it can
be 4.9V at least.
back to 2012-Feb-03
div. table
TUNER POWER +5V_TUNER form +12V Reset IC +5VSB 3V3SB

+12V
FB7001 220R/2000mA +5V_TUNER R4030
R7233 U7001 AS7805DTR-E1
NC/18 OHM 2W
1 2 1 3
0 OHM +-5% 1/10W
IN OUT
R4029 U4007
NC/10K 1/10W 1% MAX809STRG
GND
R7026 C7018 C7019 C7020 C7021
0R05 4A 1/4W + 330NF 16V 10uF 16V 100N 16V 22uF 10V
Reset- 3 1
2
C7030 VCC GND
100uF 16V
RESET
R4037
19080_217_110325.eps
NC/39K 1/10W 1%
2
110401 R4117 ORESET#
0 OHM +-5% 1/10W
Figure 7-7 Tuner power
R4038
100K1/16W
7.3.4 Peripheral
This chassis uses 128 Mbyte NAND flash for it’s software
19080_220_110325.eps
code. It stores the main software of the TV. 110401
NAND Flash 1
U4005
48
Figure 7-10 Reset IC
2 NC NC 47
3 NC NC 46
4 NC NC 45
DVDD3V3
5 NC NC 44 PDD7
7.3.7 Connector to IR/Key board
330 OHM 1/16W 6 NC I/O7 43 PDD6
R4025 PARB# 7 NC I/O6 42 PDD5
POOE# 8 RB I/O5 41 PDD4
R4027 POCE1# 9 R I/O4 40
The CN4003 is taking care of the control signals to the
DVDD3V3 E NC
4.7K1/16W 10
11 NC NC
39
38
IR/LED/keyboard board.
VDD_NAND 12 NC NC 37 VDD_NAND
13 VDD VDD 36
C4042 VSS VSS
14 35 TO IR/KEY BOARD 3V3SB
100N 16V
100N 16V
1UF16V 15 NC NC 34
C4041
C4040
NC NC
1
PACLE 16 33
PAALE 17 CL NC 32 PDD3
FB4002
R4062 600R/200mA
POWE# 18 AL I/O3 31 PDD2 R4061
1K 1/10W
Flash_WP# 19 W I/O2 30 PDD1
16K 1/10W 5%
CN4003
WP I/O1
2
20 29 PDD0
21 NC I/O0 28 Green_Button R4065 100R 1/10W 5% 1
22 NC NC 27 LED_G R4066 16K 1/10W 5% 2
NC NC RC6 R4068 3
23 26 R4067 C4063 4
NC NC 0R05 1/10W 5
NC/10N 50V
24 25 2U2 16V
100N 50V
100R 1/10W 5% 6
NC NC
C4066
C4064
C4065
7
100N 50V
Key1 8
NAND01GW3B2CN6E Key2 9
10
NAND 128MB +5V_SW 11

LIGHT_SENSOR12
CN4004
NC/CONN
1
19080_218_110325.eps ǂǂ 2 CONN
3
110401 3V3SB 4
+5VSB 5
Figure 7-8 Peripheral 19080_221_110325.eps

110325
7.3.5 System EEPROM

Figure 7-11 Connector to IR/Key board
The EEPROM is 128 Mb, it includes many important data for
this TV for example NVM and, adjustment data. 7.3.8 Connectors CN4005 and CN4006
SYSTEM EEPROM R4042 DVDD3V3 Both connectors CN4005/CN4006 is for iTV purposes only.
4K7 1/10W 5%
3
R4045
NC/0R05 1/10W 2
SYS_EEPROM_WP Pin7 WP For LCD Clock
R4102 Q4003
4K7 1/10W 5%
CN4005
4K7 1/10W 5%
10K 1/16W 5% BC847C HI = > Disable write

1
LO = > Enable Write

R4043
R4044
R4013
4K7 1/16W 1%
8
U4008
1
ǂǂ 3V3SB 1
VCC A0 LCD_Clock_SDA 2
OSCL0
ǂǂ 7
6 WP A1
2
3 LCD_Clock_SCL 100 OHM 1/10W R4070 3
OSDA0 5 SCL A2 4 100 OHM 1/10W R4069 4
SDA VSS
ǂǂ +5VSB 5
AT24C128BN-SH-T
19080_219_110325.eps
7
110401
iTV 3V3SB
Figure 7-9 System EEPROM
1
BAV99
7.3.6 Reset IC D4002
CN4006
ǂǂ CONN
3
RC6 R4072 1
The set uses the power 3V3 to reset. When 3V3SB drops 100OHM1/16W R4073 NC/0 OHM +-5% 1/16W 2
below 2.93 V, IC U4007 will send a reset to the main processor R4071 NC/0 OHM +-5% 1/16W 3
4
IC MT5366. 3V3SB 5
19080_222_110325.eps
110401
Figure 7-12 Connectors CN4005 and CN4006
7.3.9 Connector CN4008
CN4008 is the service connector, CN4001 is for iTV models.
2012-Feb-03 back to
div. table
will be enabled and an SPDIF signal will be available on

3V3SB
3V3SB HDMI 1, pin 14.
1
BAV99 BAV99
R4079 R4080 D4001 D4005 Audio Reture Channel (ARC)
AVDD3V3
4.7K1/16W 4.7K1/16W
ǂǂ
3
U0TX
R4081 U0TX 1 CN4008 R5061
4K7 1/16W 5%
---><---|>
CONN R5063
2
U0RX R4082 100 OHM 1/10W 3
0R05 1/16W
ARC_EN
---><---|>
100 OHM 1/10W
U0RX R5062
NC/0R05 1/16W
ǂǂ CN4001 AVDD3V3

NC/CONN
1
5
ǂǂ C5017 ǂǂ
1 ARC_HDMI 1UF 10V 4 2 SPDIF_OUT
2 R5058
180R 1/16W 5% U5015
3 74LVC1G125GV
R5059
3
+5VSB 4 100K 1/16W 5% R5060
82R 1/16W 5%
19080_223_110325.eps
110325 HDMI 1/Support ARC
1 RX2_2+
D2+ 2
D2 Shield 3 RX2_2-
Figure 7-13 Connector CN4008 D2-

D1+
D1 Shield
4
5
6
RX2_1+
RX2_1-
D1- 7 RX2_0+
D0+ 8 ǂǂ
D0 Shield 9 RX2_0-
D0- 10 RX2_C+
CK+ 11
7.3.10 Audio Amplifier CK Shield
CK-
CE Remote
12
13
14
RX2_C-
CEC_2
ARC_HDMI
20 NC 15 SCL_2 R5019 100OHM1/16W HDMI2_SCL HPLUGP2_5V
21 TH1 DDC CLK 16 SDA_2 R5020 100OHM1/16W HDMI2_SDA
22 TH2 DDC DATA 17 D5005 BAS316
23 TH3 GND 18 PWR5V_2 1 2 HPLUGP2_5V R5021
TH4 +5V A K
2 24 19
The platform uses I S to link the audio amplifier IC, it is using TH5 HP DET NC/0R05 1/16W
470K 1/16W 5% R5025

C5013
CN5002 HDMI
3
pins 27, 28, 29 and 30 of IC U6006.
BAS316 D5006
1K1/16W R5026
ZD5002
R5027
------><-------
1
Q5002 2 HPD2
A K
BC847C
100N 16V
1K1/16W
1
R5029
NC/PDZ24B
1
4.7K1/16W
2
AUD_V33
PWR5V_2
TP TP6012 EAPD
100N 16V
TW
C6053
TP TP6013
I2S AUDIO AMP 19080_226_110325.eps
PWRDN
19
EAPD/OUT4B OUT3A
18 DDX3A TP6010 TP 110401
20 17 DDX3B TP6011 TP
VDD_PLL 21 TWARN/OUT4A OUT3B 16 100N 50V
22 VDD_DIG CONFIG 15 C6062
PLL_FILTER 23 GND_DIG VDD 14
24
25
PWRDN
VDD_PLL
GND_REG
OUT1A
13
12
OUT1A
Figure 7-16 ART (HDMI)
PLL_GND 26 FILTER_PLL GND1 11 AUD_VCC
XTI 27 GND_PLL VCC1 10 OUT1B
BICKI 28 XTI OUT1B 9
LRCLKI 29 BICKI OUT2A 8 AUD_VCC
SDI
AMP_RESET R6083 0R05 1/16W
30
31
LRCKI
SDI
VCC2
GND2
7
6
OUT2A 7.3.13 Demodulator
TP6007 32 RESET OUT2B 5
OSDA1 A_ONSEL 33 INT_LINE VCC_REG 4
OSCL1 R6065 34 SDA VSS 3
100R 1/16W 5% A_GAIN
C6069
SCL TEST_MODE
ǂǂ R6066 100R 1/16W 5% 35 2
AUD_V33 36
37
GND_DIG
VDD_DIG
SA
GND_SUB
1 The MT5135AE provides a high performance DVB-T and
Thermal Pad
100N 50V
STA339BWTR U6006 DVB-C demodulation function, the integrated CI+ controller

C6074
OUT2B
and interface also reduce the complexity of TS routing.
100N 16V
Overall Features:
19080_224_110325.eps
110401 • Integrated DVB-T and DVB-C demodulators.
• Integrated CI/CI+ controller and interface.
Figure 7-14 Audio Amplifier • On-chip integrated SAW filter function.
• 10-Bit ADC accepting IF or low-IF inputs.
• RSSI measurement.
7.3.11 Mute circuit
• Independent RF and IF AGC controls.
• One parallel or serial TS interface accepting output.
It is DC drop detect circuit. The +5VSB is monitored, when it
turned off or will be too low, the OFF_MUTE/Mute_339 will
Demodulator
send out a high pulse to turn on the related mute circuit. MT5135
5135_DV10
5135_DV33
5135_DV33
M_CI_OUTDATA7
M_CI_OUTDATA6
M_CI_OUTDATA5
M_CI_INDATA5
M_CI_INDATA4
M_CI_INDATA3
M_CI_INDATA2
M_CI_INDATA1
M_CI_INDATA0
M_CI_INVALID
M_CI_INSYNC
CI_IOWR#
CI_IORD#
CI_IREQ#
CI_CE1#
CI_VS1#
CI_WE#
CI_OE#
CI_A14
CI_A13
CI_A11
CI_A10
CI_D7
CI_D6
CI_A8
CI_A9
DVDD3V3
Mute CKT
3V3SB
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
U1005
MT5135AE
DGND33
DGND33
PAD_A23
PAD_A16
PAD_A22
PAD_A21
PAD_WE_
PAD_A20
PAD_A14
PAD_A19
PAD_A13
PAD_A18
DGND10
PAD_A17
DVDD33
DVDD10
PAD_A8
PAD_A9
PAD_IOWR_
PAD_A11
PAD_IORD_
PAD_OE_
PAD_VS1_
PAD_A10
DVDD33
PAD_CE1_
PAD_D15
PAD_D7
PAD_D14
PAD_D6
PAD_D13
PAD_READY
SMD/0402 R6068
10K1/16W
M_CI_INCLK 97 64 CI_D5
M_CI_INDATA6 98 PAD_A15 PAD_D5 63 M_CI_OUTDATA4
PAD_A24 PAD_D12
R6069 R6062
CI_A12
M_CI_INDATA7
99
100 PAD_A12 PAD_D4
62
61
CI_D4
M_CI_OUTDATA3
PAD_A25 PAD_D11
10K1/16W PWRDN CI_A7
M_CI_OUTCLK
101
102 PAD_A7 PAD_D3
60
59
CI_D3
CI_CD1# 4K7 1/10W 5%
CI_A6 103 PAD_VS2_ PAD_CD1_ 58 PAD_CHIP_CTRL R1113
CI_RESET 104 PAD_A6 PAD_CHIP_CTRL 57
R6070 SMD/0402 0R05 1/16W CI_A5 105 PAD_PCMCIA_RESET
PAD_A5
PAD_S2_TS_DATA7
PAD_S2_TS_DATA6
56
CI_WAIT# 106 55
PAD_WAIT_ PAD_S2_TS_DATA5
AMP_MUTE Q6003 CI_A4
CI_A3
107
108 PAD_A4 PAD_S2_TS_DATA4
54
53
PAD_A3 PAD_S2_TS_DATA3
BC847BW 109
110 DGND33 PAD_S2_TS_DATA2
52
51
22K 1/16W 5% SMD/0402 CI_REG#
5135_DV33
111 DVDD33
PAD_REG_
PAD_S2_TS_DATA1
DVDD33
50 5135_DV33
112 49
113 DGND10 DGND33 48
5135_DV10
R6071 CI_A2 114 DVDD10
PAD_A2
PAD_S2_TS_DATA0
AD_S2_TS_VAL
47
M_CI_OUTVALID 115 46
4.7K1/16W CI_A1 116 PAD_BVD2
PAD_A1
PPAD_S2_TS_SYNC
PAD_S2_TS_CLK
45
M_CI_OUTSYNC 117 44 RF_AGC_5135
CI_A0 118 PAD_BVD1 PAD_RF_AGC 43 R1126 RF_AGC_Control
M_CI_OUTDATA0 119 PAD_A0 PAD_IF_AGC 42 TUNER_CLK
PAD_DEMOD_TS_DATA0(TS_DATA0)
PAD_D8 PAD_TUNER_CLK 0R05 1/10W

CI_D0 120 41
PAD_DEMOD_TS_SYNC(TS_SYNC)
TUNER_DATA
M_CI_OUTDATA1 121 PAD_D0 PAD_TUNER_DATA 40
PAD_PVR_TS_SYNC(TS_DATA7)
5135_DV10
PAD_DEMOD_TS_CLK(TS_CLK)
PAD_D9 DVDD10
PAD_DEMOD_TS_VAL(TS_VAL)
PAD_CI_TS_DATA0(TS_DATA4)
PAD_PVR_TS_DATA0(TS_ERR)
PAD_PVR_TS_CLK(TS_DATA5)
Mute_339
PAD_PVR_TS_VAL(TS_DATA6)
CI_D1 122 39
PAD_CI_TS_SYNC(TS_DATA3)
PAD_D1 AVSS10_5
PAD_CI_TS_CLK(TS_DATA1)
PAD_CI_TS_VAL(TS_DATA2)
M_CI_OUTDATA2 123 38 AVDD33_4

CI_D2 124 PAD_D10 AVDD33_IFPGA 37 5135_AV12
+12V +5VSB CI_CD2# 125 PAD_D2
PAD_CD2_
AVDD12_DEMOD
PAD_IFPGA_INP
36 MT5135AD+
2
PAD_PVR_TS_DATA1
CI_INT 126 35 MT5135AD-

PAD_CI_INT PAD_IFPGA_INN
AVDD33_DEMOD_3
AVSS33_DEMOD_3
127 34
PAD_MT5135_RST
128 DGND33 AVSS12_DEMOD_3 33 R1129

5135_DV33
D6003 AVDD33_3
PAD_SPI_DATA
DVDD33 PAD_EXT_CLKSEL
AVDD33_XTAL
AVSS33_XTAL
A K
AVDD33_RSSI
PAD_SPI_CLE
PAD_SPI_CLK
4K7 1/10W 5%
AVSS33_RSSI
AVDD12_PLL
PAD_XTALO
R1132 NC/4K7 1/10W 5%

PAD_ADIN0
PAD_XTALI
BAS316
DGND33
DVDD33
DVDD10
PAD_TN
PAD_TP
R6073 R6074
0R05 1/10W
D6001
1
NC/0R05 1/10W D6004

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
1 2 1 2 OFF_MUTE
HDMI_SW_CTRL1
HDMI_SW_CTRL2
A K A K
C6085
5135_DV33
VGA_UR_EN
LVDS_CTRL
BAS316 220UF 16V

RSSI
47R 1/16W 5%
ARC_EN
CI_OCP
+ BAS316
2
XTALO
XTALI
5135_DV33
5135_AV12
5135_DV10
TN
TP
1 BC857BW
AVDD33_1
R1146
SPI_CLE
GPIO
DVDD3V3
ǂǂ
AVDD33_3
SPI_DATA
Q6001
AVDD33_2
SPI_CLK TP
47 OHM 1/16W 5%
R6075 4.7K1/16W TP1003 R1122

TP TP1001
8
7
6
5
10K 1/16W 5%
3
DEMOD_RST
R1212
RP1002
DEMOD_RST
NC/4K7 1/16W 5%
2 1 R6076 LNA_ON/OFF CI_PWR_EN C1111

K A
1
2
3
4
R1151 100N 50V

1K1/16W 0R05 1/16W
D6005 SMD/0402 DEMOD_TSDATA0
DEMOD_TSSYNC
BAS316 R6077 ǂǂ DEMOD_TSVAL C1081
DEMOD_TSCLK 10pF 50V
100K1/16W
R1152
SMD/0402 RF_AGC_T RSSI
470K 1%
R1153
330K 1%
19080_225_110325.eps
110401 19080_227_110325.eps
110407
Figure 7-15 Mute circuit

Figure 7-17 Demodulator
7.3.12 ARC (HDMI)
ARC (audio return channel) is supported on HDMI 1 only.

When an ARC command is received from CEC, then IC U5015
back to 2012-Feb-03
div. table
7.3.14 Tuner 7.3.17 Level shift
The tuner covers all bands in VHF and UHF, it includes digital IC U7011 supports the level shift function.
terrestrial (DVB-C,DVB-C), I2C bus control of tuner, address
selection, broadcasting system selection. LEVEL SHIFTER TCON_VCC
100OHM1/16W
R7098
7.3.15 TCON (not applicable to 5000 series “Berlinale” sets)
NC/100N 16V
C7109
R7101
3K1/16W
IC U7008 provides VGH, VGL, TCON_VDD, TCON_VCC 10uF 16V U7011
C7111 TPS65192RHDR
signals for panel control. The enable pins are EN1 and EN2. R7103 GVDD_ODD_I 1 28
GVST GVST_I
GVDD_EVEN_I 2 IN9 VSENSE 27 FLK_IN
R7104 0R05OHM1/16W GVST_I 3 IN8 FLK1 26
GVDD_ODD GVDD_ODD_I
0R05OHM1/16W GCLK1_I 4 IN7 FLK2 25 R7106 R7107
R7105 C7112 GCLK2_I 5 IN6 FLK3 24 3K1/16W 560R 1/16W 5%
GVDD_EVEN GVDD_EVEN_I
IN5 RE
NC/178K OHM 1% 1/16W
Multi DC/DC TP7014 0R05OHM1/16W 100N 16V GCLK3_I 6 23

GCLK6 R7108 GCLK6_I GCLK4_I 7 IN4 GND 22 DISCHG
TCON_VDD
0R05OHM1/16W GCLK5_I 8 IN3 DISCHARGE 21 VDD_ODD
NC/100N 25V
C7051
C7100
C7101
C7055
C7102
BAV99
R7109 IN2 OUT9
150K 1/16W 1%
D7005 GCLK5 GCLK5_I C7113 GCLK6_I 9 20 VDD_EVEN

R7039
R7040
C7050
R7041
IN1 OUT8
10uF 25V
10uF 25V
10uF 25V
10uF 25V
1uF 25V
9K1 1/8W 1% 1 EN2 0R05OHM1/16W 1uF Z 10V 10 19 VST

GCLK4 R7110 GCLK4_I 11 VGH1 OUT7 18 CLK1_TCON
Thermal Pad
3
0R05OHM1/16W 12 VGL OUT6 17 CLK2
NC/100N 25V
18Kohm 1/16W +/-1%
2
R7113 VGH2 OUT5
39K 1/16W 1%
GCLK3 GCLK3_I C7114 CLK6 13 16 CLK3

R7042
R7044
C7060
C7056
100N 25V
1uF Z 10V CLK5 14 OUT1 OUT4 15 CLK4
0R05OHM1/16W
R7114 C7117 OUT2 OUT3
GCLK2 GCLK2_I
C7063
C7064
C7065
1uF 25V
10uF 25V
10uF 25V
C7062
1uF 25V
0R05OHM1/16W 1uF 50V
TCON_VCC C7067
GCLK1 R7115 GCLK1_I
NC/27P50V
29
C7068
1N 50V R7054 0R05OHM1/16W
R7055 C7070 2R2 1/16W 5% L7004
R7119
10K1/16W R7056
NC/10OHM1/16W
2 1
1.5nF 50V 10K1/16W D7006
20R 5% 1/16W
20R 5% 1/16W
10OHM1/16W
22uH
C7072
C7073
TCON_PGOOD
NC/10uF 16V
NC/10uF 16V
R7117
R7116
R7118
C7074
1uF 25V
D7007
BAV99 C7075 R7059 C7076
2 150pF 50V 10R 1/16W 5% R7120 VGH
3 2N2 50V 10OHM1/16W
EN2 1
R7121
41
40
39
38
37
36
35
34
33
32
31
TP7012 U7008
TP D7008
10OHM1/16W
Thermal Pad
AGND
CRST
PGOOD
COMP
FB1
SWO
SWI
LX1
LX1
PGND
R7122
C7078
NC/BAV99
0.1UF50V
VGH 2 NC/10OHM1/16W
C7081 1 30
THR PGND VGH VGL 1uF 50V
R7062
3 2 29
10K 1/4W
EN2
0R05OHM1/16W
DRVP EN2
R7061
56K 1%
3 28
4.7uF 50V
TH7001 C7080
GND2 VL C7118
R7064
1 NC/1uF 50V 4 27
1
47K 1uF 50V SRC DEL2
C7079
C7083
2 1
1uF 25V
5 26 EN1
NC/1uF 50V
GON EN1
t TCON_VDD
C7084
6 MAX17113ETM+ 25
7 DRN FSEL 24 R7065 Panel_12V
MODE VIN
2
8 23 0R05OHM1/16W
DLP IN2
2
C7085
VGH_FB 9
10 FBP IN2
22
21
NC/B540C ZD7001
NC/0R05OHM1/16W
CPGND OUT
D7012 NC/UDZSNP9.1B
C7086
C7087
3
10uF 16V
10uF 16V
+
C7088
R7069
1K1/16W
R7066
AGND
DRVN
R7068
C7089
220K 1% 1 100uF 16V

0.1UF50V
0R05OHM1/16W
DEL1
2
FBN
REF
BST
0.47uF 50V
CTL
FB2
LX2
LX2
R7067
VGH_FB D7009
NC/100N 25V
11
12
13
14
15
16
17
18
19
20
BAV99
0R05OHM1/16W
0R05OHM1/16W
NC/0R05OHM1/16W
R7071
R7072
C7090
R7073
VGL_FB
VCC_FB
R7070
11K 1%
REF
C7091
0.47uF 16V C7092
0.1UF50V TP7015
19080_231_110325.eps
3
TP
C7093
D7010
0.1UF50V
L7005
BAV99
TCON_VDD
R7075 22uH
TCON_VCC
110401
5K1 1/16W 5%
2
0R05OHM1/16W
NC/10uF 10V
2
C7095
C7099
C7096
C7097
C7098
R7076
150pF 50V
10uF 10V
10uF 10V
10uF 10V
TCON_VCC D7011
VCC_FB
SS3P4
Panel_12V DPM R7077 EN2 R7078
NC/0R05OHM1/16W
1
0R05OHM1/16W
C7103 1uF 25V R7083
R7080 R7081 C7105 150K 1/16W 1%
NC/360R 1/10W 5% 1K 1/16W 5% R7082
VGL_FB
R7084 220N 25V 27K 1/16W 1% TP7013

PANEL_VCC_ON/OFF EN1
Figure 7-20 Level shift

REF
C7106 TP
0R05OHM1/16W
NC/0R05OHM1/16W
R7086
10uF 16V
R7087
3K6 1/16W 1%
VGL
19080_229_110325.eps
110401
Figure 7-18 TCON
7.3.16 GAMMA (not applicable to 5000 series “Berlinale” sets)
IC U7010 saves gamma data and V-COM data, the data

depends on the panel. The gamma data can be auto written
3 times by code initially. It is written via special tooling in the
factory via CN7000. V-COM data will be adjusted to nominal
values before shipping.
GAMMA CN7000
1 R7085 100R 1/16W 5% OSDA0
VCOM_FB
2 R7030 100R 1/16W 5% OSCL0

3
4
NC/CONN
R7099
TCON_VDD
1.6K 1/16W
OSCL0
GMA16
GMA15
R7096 R7097
R7100 VCOMR 20R 5% 1/16W 20R 5% 1/16W
0R05OHM1/16W
AVDD_GM
VCOM R7102 VCOML
U7010
20
19
18
17
16
0R05OHM1/16W G1604QH1U C7108

10uF 25V
AVDD
SCL
GMA8
GMA7
NC
21
E-Pad
TCON_VCC
OSDA0 1 15 GMA13
2 SDA GMA6 14 GMA12
3 A0 GMA5 13 GMA7
4 DVDD GMA4 12 GMA6
VCOM 5 AGND_AMP GMA3 11 GMA4
AVDD_AMP
VCOM GMA2
VCOM_FB
C7110
100N 16V
GMA1
AVDD
NC
6
7
8
9
10
GMA3
VCOM_FB AVDD_GM
1K 1/16W 5%
C7115 C7116
R7111
R7112
100N 25V 100N 25V

1K 1/16W 5%
VCOMRFB
VCOMLFB
19080_230_110325.eps
110401
Figure 7-19 GAMMA
2012-Feb-03 back to
div. table
IC Data Sheets L11M2.1E LA 8. EN 31
8. IC Data Sheets
This chapter shows the internal block diagrams and pin config-
urations of ICs that are drawn as “black boxes” in the electrical
diagrams (with the exception of “memory” and “logic” ICs).
8.1 Diagram 10-4-1 System Power 1 B01, TPS54319 (IC U7004)
Block diagram
PWRGD EN VIN
i1 ihys
Shutdown Thermal
Shutdown UVLO
Enable
93% Logic Comparator
Shutdown
Shutdown
Logic
107%
Enable
Threshold
Boot
Voltage Charge
Reference
Boot
Minimum Current
UVLO
COMP Clamp Sense
ERROR
AMPLIFIER
PWM
VSENSE Comparator BOOT
SS/TR Logic and PWM

Latch
Shutdown
Logic Slope
Compensation
COMP PH
Frequency
Shift
Overload Maximum
Recovery Clamp
Oscillator
GND
with PLL
TPS54319
AGND POWERPAD RT/CLK
Pinning information
PWRGD
BOOT
VIN
EN
16 15 14 13
VIN 1 12 PH
QFN16 VIN 2
PowerPAD
11 PH
RTE PACKAGE (17)
(TOP VIEW)
GND 3 10 PH
GND 4 9 SS/TR
5 6 7 8
AGND
VSENSE
COMP
RT/CLK
19080_310_110408.eps
120102
Figure 8-1 Internal block diagram and pin configuration
back to 2012-Feb-03
div. table
EN 32 8. L11M2.1E LA IC Data Sheets
8.2 Diagram 10-4-3 Peripheral B03, MT5366CVGG BGA-479 (IC U4001)
Block diagram
VADC × 4
MT5366CV
19080_300_110316.eps
120102
Figure 8-2 Internal block diagram
2012-Feb-03 back to
div. table
Pinning information MT5366CV [1/2]

479 1 2 3 4 5 6 7 8 9 10 11 12
AA
AB
AC
AD
AE
LB 1 2 3 4 5 6 7 8 9 10 11 12
19080_301_110316.eps
120102
Figure 8-3 Pin configuration [1/2]
back to 2012-Feb-03
div. table
Pinning information MT5366CV [2/2]

13 14 15 16 17 18 19 20 21 22 23 24 25 RT
AA
AB
AC
AD
AE
13 14 15 16 17 18 19 20 21 22 23 24 25 RB
19080_302_110316.eps
120102
Figure 8-4 Pin configuration [2/2]
2012-Feb-03 back to
div. table
8.3 Diagram 10-4-5 Audio IO/SPDIF/Headphone B05, TPA6132A2RTER 25mW QFN-16 (IC U6004)
Block diagram
VDD
TPA6132A2RTER HPVDD
Supply 2.2 F
Control
PGND
HPVDD
INL- Resistor
–
Array + OUTL
INL+
Short-Circuit
HPVSS Protection
Thermal
HPVDD Protection
–
INR-
Resistor
Array + OUTR
INR+
HPVSS HPVDD
CPP
G0 Charge 1 F
Gain Click-and-Pop
Suppression Pump
Select
G1
CPN
HPVSS
1 F
SGND EN
Pinning information
SGND
OUTL
VDD
EN
16
15
14
13
INL- 1 12 HPVDD
INL+ 2 11 CPP
INR+ 3 10 PGND
INR- 4 9 CPN
7
6
8
5
OUTR
G0
G1
HPVSS
18850_304_100107.eps
120102
back to 2012-Feb-03
div. table
8.4 Diagram 10-4-6 Speaker/Sound woofer B06, STA339BWTR (IC U6006)
Block diagram
I2C Protection
current/thermal
I2S
interface Channel
1A
Channel
Power Logic 1B
Volume control
control
FFX
Channel
2A
Regulators
Channel
PLL
2B
Bias
Digital DSP Power
Pinning information
GND_SUB 1 36 VDD_DIG
SA 2 35 GND_DIG
TEST_MODE 3 34 SCL
VSS 4 33 SDA
VCC_REG 5 32 INT_LINE
OUT2B 6 31 RESET
GND2 7 30 SDI
VCC2 8 29 LRCKI
OUT2A 9 STA339BWTR 28 BICKI
OUT1B 10 27 XTI
VCC1 11 26 GND_PLL
GND1 12 25 FILTER_PLL
OUT1A 13 24 VDD_PLL
GND_REG 14 23 PWRDN
VDD 15 22 GND_DIG
CONFIG 16 21 VDD_DIG
OUT3B / FFX3B 17 20 TWARN / OUT4A
OUT3A / FFX3A 18 19 EAPD / OUT4B
19080_306_110317.eps
120102
2012-Feb-03 back to
div. table
8.5 Diagram 10-4-13 HDMI Switch B13, TMDS351PAG (IC U5003)
Block diagram
B12
A12
B11
A11
B13
A13
B14
A14
RINT
RINT
RINT
RINT
V cc
V cc
V cc
V cc
RINT
RINT
RINT
RINT
TMDS
TMDS
TMDS
TMDS
EQ
Rx
Rx
Rx
Rx
Vcc
RINT RINT
A24 Y4
TMDS
Rx
TMDS
B24 Driver
Vcc
Z4
RINT RINT
A23
TMDS
Rx
B23 Y3
Vcc
TMDS
Driver
.
RINT RINT
A22 Z3
TMDS
.
Rx
B22
.
Vcc
.
RINT RINT Y2
.
A21 TMDS
TMDS Driver
Rx
B21
.
Z2
Vcc
Y1
RINT RINT
TMDS
A34 Driver
TMDS
Rx Z1
B34 Vcc
VSADJ
RINT RINT
A33
TMDS
Rx
B33 Vcc
.
RINT RINT
A32
TMDS
.
Rx
B32
Vcc
.
RINT RINT
A31
TMDS
Rx
B31
HPD1 S1
Control S2
HPD2 Logic
HPD3
HPD_SINK
SCL1 SCL_SINK
SDA1 SDA_SINK
SCL2
SDA2
SCL3
SDA3 HPD/DDC VDD
Pinning information
HPD3
HPD2
SDA2
SCL2
GND
VDD
A24
B24
A23
B23
A22
B22
A21
B21
Vcc
Vcc
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
SDA3 1 48 A14
SCL3 2 47 B14
GND 3 46 Vcc
B31 4 45 A13
A31 5 44 B13
Vcc 6 43 GND
TMDS351
B32 7 42 A12
A32 8 41 B12
64-pin TQFP
GND 9 40 Vcc
B33 10 39 A11
A33 11 38 B11
Vcc 12 37 SCL1
B34 13 36 SDA1
A34 14 35 HPD1
GND 15 34 EQ
VSADJ 16 33 S2
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Y4
Z4
HPD_SINK
Vcc
Y3
Z3
Y2
Y1
S1
GND
Z2
Vcc
Z1
SCL_SINK
GND
SDA_SINK
19080_309_110317.eps
110330
back to 2012-Feb-03
div. table
8.6 Diagram 10-4-14 DVB T/C Demodulator MT5135 B14, MT5135AE/A LQFP-128 (IC U1005)
Block diagram
Other
demodulators CAM
TS
interface PCMCIA interface
RSSI MT5135AE PVR playback TS

RSSI ADC
PVR recording TS
CI+ controller
RF AGC Demod TS
AGC
Demod TS
DVB-C output
Differential
demodulator
RF IF signal Main
Tuner PGA 10-bit Integrated SAW FEC decoder decoder
ADC filter function chip
DVB-T
demodulator
Tuner SDA
Micro- SPI
SIF Master
controller transceiver SPI interface
Tuner SCL
Pinning information
DVD D33
DVD D10
DVD D33
REA DY
IOW R_
IOR D_
DVSS
DVSS
DVSS
VS1 _
CE1_
WE_
OE_
A 23
A 16
A 22
A 21
A 20
A 14
A 19
A 13
A 18
A 17
A 11
A 10
D15
D14
D13
A8
A9
D7
D6
96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
A15 97 64 D5
A24 98 63 D12
A12 99 CI interface 62 D4
A25 100 61 D11
A7 101 60 D3
VS2_ 102 59 CD1_
A6 103 58 CHIP_CTRL
CMCIA_RESET 104 57 S2_TS_DATA7
A5 105 56 S2_TS_DATA6
Ex t ern al d emo d in t er f ac e
WAIT_ 106 55 S2_TS_DATA5

A4 107 54 S2_TS_DATA4
A3 108 53 S2_TS_DATA3
DVSS 109 52 S2_TS_DATA2
DVDD33 110 51 S2_TS_DATA1
REG_ 111 50 DVDD33

DVSS 112
DVDD10 113
MT5135AE 49 DVSS
48 S2_TS_DATA0
A2 114 47 S2_TS_VAL
BVD2 115 46 S2_TS_SYNC
Tu n er in t er f ac e
A1 116 45 S2_TS_CLK
BVD1 117 44 RF_AGC
A0 118 43 IF_AGC
D8 119 42 TUNER_CLK
D0 120 41 TUNER_DATA
D9 121 40 DVDD10
D1 122 39 DVSS
D10 123 38 AVDD33
D2 124 37 AVDD12
CD2_ 125 36 IFPGA_INP
CI_INT 126 Host chip and TS interface Analog interface 35 IFPGA_INN
DVSS 127 34 AVSS12
DVDD33 128 33 EXT_CLKSEL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
SP I_CL E
DVS S
DVDD3 3
XTA L I
XTA L O
DVDD1 0
A VD D1 2
A VD D3 3
A D IN0
A V SS33
A VD D3 3
A V SS33
A V SS33
A VD D3 3
PVR_TS _SYNC
DEM OD_T S_SYNC
TN
PVR_T S_DA T A 1
PVR_T S_DA T A 0
CI_T S_DA T A 0
DEM OD_T S_DA T A 0
TP
CI_TS _SYNC
SP I_DA TA
SP I_CL K
PVR_T S_VAL
PVR _TS_CL K
CI_T S_VA L
CI_TS_CL K
DEM OD_T S_VAL

DE MOD_ TS_C LK
M T5135_R ST_B
19080_303_110317.eps
110330
2012-Feb-03 back to
div. table
8.7 Diagram 10-4-16 T-Con/ Power block/Gamma B16, MAX17119ETI+T (IC U7109)
Block diagram
Pinning information
VSENSE
YDCHG
FLK3
FLK2
FLK1
GND
RE
28 27 26 25 24 23 22
A9 1 21 Y9
A8 2 20 Y8
A7 3 19 Y7
MAXIM 18 Y6
A6 4
PF61
A5 5 17 Y5
16 Y4
A4 6
A3 7 15 Y3
8 9 10 11 12 13 14
GON1
GOFF
GON2
A2
Y1
Y2
A1
19080_308_110317.eps
110317
back to 2012-Feb-03
div. table
Personal Notes:
10000_012_090121
110
2012-Feb-03 back to
div. table
Block Diagrams L11M2.1E LA 9. EN 41
9. Block Diagrams
9.1 Wiring diagram Berlinale 40" - 46"
WIRING DIAGRAM BERLINALE 40" - 46"
DISPLAY
SUPPLY
CN2
MAIN POWER SUPPLY

40 PLDE-P017A
(1005)
CN4
14P
8M95
SPEAKER BOX
(5213) SSB
B (1150)
CN4010
51P
CN4003
8P
CN1
2P
CN6004 CN6005 CN7001

4P 3P 14P
8G51
8308
51P
INLET
LCD DISPLAY
(1004)
TWEETER TWEETER
(5216) (5216)
CN2 CN1
MAINS
SWITCH
(8308) CN4010 (B010) CN4003 (B04) CN7001 (B01) CN6005 (B06)

LEADING EDGE (1108)
J1
4P
1. Panel_12V
2. Panel_12V
1.
2.
LIGHT_SENSOR
GND
1. STB_PWR3V3
2. STANDBY
1. OUT2A
2. GND
3. Panel_12V 3. RC6 3. GND 3. OUT2B
4. Panel_12V 4. Green_Button 4. GND
| 5. 3V3SB 5. +12V
| 6. LED_G 6. +12V CN6004 (B06)
51. GND 7. Key1 7. +24V 1. OUT1A
8. +5V_SW 8. GND 2. GND
9. INVERTER_ON_OFF 3. GND
10. BRIGHT_ADJ 4. OUT1B
11. N.C.
12. N.C.
13. N.C. 19150_001_110511.eps
14. GND 110914
2012-Feb-03 back to
div. table
Block Diagrams L11M2.1E LA 9. EN 42
9.2 Block Diagram Berlinale
CI c ar d s l o t
DDR2 1GHz NA ND Fl as h
(CAM)
128 MB x 2 128 MB
RF CI/CI+
Tuner Tuner I2C DB V-T/C

Demodulator
CI + con trol ler SP I
TS
SP D IF Ou t
MT5135
DVB -T/C m o d el
EDID EDID
DIF +/-
EDID
MT5366 UART ( ISP & Factory alignment)
24C02 24C02 24C02 MCU ARM1 1 Head p h o n e A m p

Headphone
MPEG/video/audio TPA6132/
HDMI 1 ARC HDMI
HDMI 2 SWITCH decoder
HDMI 3 TMDS 351 A u d i o P r e- A m p
Scaling SC A RT1 L/R o u t
NJM4580
NVM System I2C Video enhancement
24C128 3D comb I2S A u d i o A MP
Speakers
YPbPr × 1 LVDS Transmitter Audio I2C STA339BWTR
Analog Video inputs :
Fu ll SC ART × 1
HDMI 1.4
PC VGA
ADC
EDID
24C02 H.264
T-con IC
Analog Audio inputs : Audio R/L of CVI
mini LVDS Transmitter
Audio R/L of SCART1
Sawless ATD build-in
Audio R/L of PC/ DVI
LVD S Pan el (50 Hz)
USB x 1 T-con
Touch Key pad

RC
Light sensor
19150_004_110511.eps
11051
2012-Feb-03 back to
div. table
Circuit Diagrams and PWB Layouts L11M2.1E LA 10. EN 43
10. Circuit Diagrams and PWB Layouts

10.1 A 272217190318 PSL
10-1-1 Power Supply Unit with Integrated LED Driver
Power Supply Unit with Integrated Led Driver

A01 1mHL402
5 8
D402
SB3200
LED_CN2_A
A01
CN2_1316
33uF/200V
1mH L401 R454 1
C414
SB3200 LED_CN2_A LED1A
5 8
51k
VLED LED_CN1_A 2
NC
UVLS VREF D401 R424 R473 R475
R450 3
33uF/200V
ISEN1 LED1K
R412 R413 R414 51k 51k 8.2K
C413
R451 C416 1.8K 4
D
100k 1K NC
100K 10K 100nF R421 5
POK
51k
R453 G Q407 C470 LED2A
47k LED_CN1_K 10nF 6
GND1 R415 2N7002 NC
R441 D Q401 2K
R423
7
S
47K G LED_CN2_K LED2K
+12V VREF 7002 47k
8
R411 C410 R449 C433 D GND1
R410 10
C409 S C422 47nF
G
Q404 9
1uF R416 47nF R422 47nF
D
3k R474 R476 LED_CN1_A LED3A
BL-ON-OFF 10K VREF 56K 3k G
R462 MDHT3N40 ISEN2
GND1
D Q402 Q403 S
1.8K 8.2K
10
NC
C425 C426
D
G S
AOD450 GND1 10k 11
GND1 AOD450 GND1 OPEN 1nF LED3K
R409 C408 R477 G Q408 C472
C407 S R463 10nF
12
NC
R468G R468H
100nF 100K 2.2uF U401 10K 2N7002
C424 R470 10k R464 R465 R466 R467 13
R417 R461 LED4A
S
0
R408 1 UVLS FAULT
24
OPEN 82 R472
47K 82 2.7 F 2.7 2.7 2.7 1.5k 14
2 VCC DRV1
23 R471 100k NC
R442
R468C
R468D
R468A
R468B
R468E
R468F
15
R468I
LED_CN1_K LED4K
R468
OPEN
3 22 10k R445 1k GND1
300
100
ENA DRV2 R443 R444
18
18
18
18
18
18
VREF SD-53426-15
GND1 R446
4 VREF GND
21
2.7 2.7 2.7 VREF
R438 R419 2.7 GND1
R407 R426 5 RT ISW1
20
100K 56K 10K 1k GND1
BL-DIM1(VSYNC) 6 SYNC OVP1
19
CN4_1M95
GND1
LED_CN2_K
1
R452 7 PWM1 PROT1
18 ST3V3 3V3stdby
10k C423 R457 R491 R492 2
8 PWM2 ISEN1
17 D STANDBY Standby
OPEN ISEN1 1.5k G 10k
GND1 9
ADIM ISW2
16 Q405 120k GND1 3
GND1
ADIM
S MDHT3N40 4
TIMER
10
TIMER OVP2
15 GND1 GND1
5
11
SSTCMP1 PROT2
14
BL-I-CTRL +12V +12V
12 13
R496 R490 R494 +12V 6
SSTCMP2 ISEN2
OPEN OPEN R493 +12V
R402 R434 R435 C427 75K
OPEN
OPEN
C402
R455G R455H
TIMER 7
D403
R403 OZ9902 15K 15K R456 1nF OPEN ADIM
+24V5 +Vsnd
D405
1uF 10K 10k C493
0
C403 10K IC-SOP-24-OZ9902
10nF GND1
8
GND_SND
1nF
R436 R437 R497 R495
C405 C406 C401 15K 15K 9
BL-ON-OFF BL-ON-OFF
R455C
R455D
R455A
R455B
R455E
OPEN 220k
R455F
R455I
0.47uF
OPEN
C404 1nF
R455
10
300
100
0.47uF R439 R440 BL-DIM1(VSYNC)
18
18
18
18
18
18
C494 BL-DIM1(Vsync)
0.47uF 15K 15K R498 11
OPEN BL-I-CTRL BL-I-CTRL
R447 R448 OPEN GND1
GND1 12
C428 C429 C430 C431 15K 15K GND1 GND1 POK POK
OPEN OPEN OPEN OPEN ISEN2 13
+24V5 +24(AL2_DVBS)
+12V UVLS
GND1 14
GND1 GND1
VCC
R630A
R630
R482
1K
1-1735446-4
1K 47K
C450
! PC601 R481 COLD 100nF
HOT R631
2.7kF
EL817MC 10K Q406
KST2222A GND1
C440 R480
10nF 100K
Q222
C622 R632
100nF 4.7K GND1 AOD407
+24V5
S D
U602
D
S
C292 R228
AS431AN / SMD Q221
SDURF1040CT 22nF 470K
10K
R221
! BD601 L601
G
R223
R229
VLED KST2907
56K
16K
3 4A 600V R511 4.3K
BFS3510A
33uF/200V
R518 D
R220
68K, 2W
Q220
12K
2200pF
Q501
C323
C411
R431
4 1 C506 G
R512
D211
R222
2.2K
KST2222A
15K
R240
1.6K
1uF U501 68 KF5N50FS
! T501 C233 C233A
R624 R623 R622
330k
L6599 S D220
2
D503 R519 14 ZS 50V 47UF ZS 50V 47UF
1 CSS 16
VBOOT
GND1 MMSD4148
TH601 MMSD4148 22 13
7.5K
R510 C504
R243
2 DELAY 15
27K
R233
ZD220
1
R520
C505 HVG
6.8V
10K
330k
! ! 12 MBRF10100CT
! VCC 750K 220nF 3 14 C508
CF OUT
3ohm 15D 2
BFS3550R
C643 C644 C645 330pF 4 RFMIN NC
13 104 11
L502
330k
GND1
68uF/450V MVCC 3 10
68uF/450V 68uF/450V
MK 220uF/35V
MK 220uF/35V
12
5 STBY VCC R521 D210
9
6 ISEN 11 D 4
LVG
68
C207A
82K
C207
R284
G 8
R501
10
D504 R522
R625
7 LINE
330k
R508
100K
GND
Q510
R507
! LF103 5
3.3K
12K
CS1625075MC C510 8 DIS 9
R523
S
KF5N50FS
7
0.1uF
C509 PFC_STOP
MMSD4148
22 6
4 3
R628 D 22uF/50v IC-SOP-16-L6599
10K
Q604
TSA601MA1
100 EFD4549 GND1

G
R509 L201
SA101
R284A
R531
R502
STK0160 1N4148 C526 C513 CY202 1.6uH C208 C209 C215
36K
0
2 1
SDB1060PI
s
S 47 D512 100pF/1kV 100/1W 12nF/1kV 330pF MK 1000uF/25V MK 1000uF/25V
R513
! 47u/50V 47u/50V 2.2uF
C511
R629
68
C611 L501 +12V
0.1uF
C502 C501 C222 C206
100K
R251
5.6K
1nF
10nF 2.2nF BFS3550R D212
R284B
CY104
0
120 1W
! ! CY103 ! CY105
R101
COLD R507A R527

MMSD4148W
R627 R626
10K
330pF 0 D506 OPEN

330pF
33 GND1
R252A R252
ZD503
10K
GND1
5.6V
4.3K
C507 ! PC501 R256 GND1

1nF/50V EL817MC
330n 3.6k
R255
1.5K
0
! CX102 C210 R254
CX103
D101 1uF 1K
open ! LF102 U203
4 3 IN4007 ! PC502 AS431AZ
EL817MC
R253 R253A
D102 D103 TH101
0
2 1 GND1
CS1625075MC
IN4007 IN4007 10D9 1nF/1KV 5mm ! L301
T101
2.7K
C119 D301 ST3V3
5 10
COLD
R111
! CY102 CY101
OPEN
!
P6KE180A
ZD101
330pF 330pF 3 9 SB140 4.7uH GND1

GND1
4
D106A 8
R113 D107 R105 C306
+24V5
STVCC R311
! STVCC Q112 1 7 C301 47uF/50V
CX101 ZD110 OPEN 200 OPEN +12V
Q110 R122 IN4007 0 MK 1000uF/10V
1000V 1A 2 6
OPEN OPEN
100nF R235
OPEN C121
STVCC C102 EFD2020
S 8
S 7
NC 6
D 5
ZS47uF/50V 1k
OPEN
LT 450V 4.7uF
R112
LNK362
U101
D114
OPEN
GND1
R118
Q110A R305 R231

CAP002DG R302
VCC MMSD4148 OPEN R122A ZD110A
5 4
Q112A
3 BP
4 FB
2.7K 9.1k
1 S
2 S
1/2W 750k 6 3
1/2W 750k OPEN 100 R244
R303
OPEN
1.5K
R118A
18K
OPEN
OPEN
R117A
MVCC OPEN 56K

R120
BASE R234
10K
7 2
Q111 R304 C304
R112A
! R101B ! R101C
OPEN
8 1
R123 1k
KST2907A ! PC101
U110 EL817MC 750 0.1uF
R121
BASE
43K
R117 R119 D110 C303 R306

C107
0.1uF
C101 47pF/1kV
ZD104
ZD103
2.2uF U301 1.5K

5.1V
7.5V
750V 14A OPEN OPEN OPEN D115

MMSD4148 R308 AZ431L R307
C115 U206 U207
120 AS431AN / SMD AS431AN / SMD
! VA101 2200pF/ 630V C118 47 C220 R242 C221
VCC
AXIAL 6-Hole
R109 1nF
AXIAL 6-Hole
D116 R126 R125 R124 1nF R309 GND1 R230 1.8K 1nF
Q101
L101A
U102
L102A
1.8K
51K 51K AS431A R110 KST2222A 1K
4.7K
220K C109
R128
510K
RF101L4S GND1 GND1

10K R310
ZD102
ZS 22uF/50V ! PC102 STANDBY

15V
EL817MC 1K
! F101 R127 C116 C117 Q301 C305
T3.15AH 250V 510K 1W 47nF 47nF KST2907A
0.1uF
GND1
Live Neutral
2
3 2011-01-19
!
AC-inlet Power Supply Unit with 2722 171 90318
CN1_1308
Integrated Led Driver PLDE-P007A
19154_007_120109.eps
120109
2012-Feb-03 back to
div. table
10-1-2 Layout top
4 2011-01-19
Layout top 2722 171 90318

PLDE-P007A
19154_008_120109.eps
120109
2012-Feb-03 back to
div. table
10-1-3 Layout bottom
4 2011-01-19
Layout bottom 2722 171 90318

PLDE-P007A
19154_009_120109.eps
120109
2012-Feb-03 back to
div. table
10.2 A 272217190361 PSL

Power Supply Unit with

A01 Integrated Led Driver VLED
L410
5
! L401
200UH
8 LED_CN1_A
A01
BFS3510 D401
R416 RF101L4S
100 R430 CN4_1M95
GATE D 82k 1
G ST3V3 3V3stdby
33uF/300V
Q401 2
R409 D402 STANDBY Standby
C404
S KF5N50DS R432
1 MMSD4148 82k GND1 3
GND1
4
CS R434
VREF GND1 GND1
5
R414 C405 82k
OVP
+12V +12V
OPEN 6
10k +12V +12V
BL-ON-OFF 7
EN C407
R433 R494 +24V5 +Vsnd
2.7k 1K 8
R401 R402 C401 1N R493 GND1 GND_SND
2.2 R410C
2.2 R410D
2.2 R410A
2.2 R410B
2.2 R410E
2.2 R410F
10K 100nF
2.2 R410
100K 100K 9
U401 GND1 POK BL-ON-OFF BL-ON-OFF
FBN 10
1 EN FBN 14 BL-DIM1(VSYNC) BL-DIM1(Vsync)
D
GND1 R417 C410 R491 11
+12V 2 VCC FBP 13 FBP 33k 10nF G Q492 BL-I-CTRL BL-I-CTRL
R403 C402 GATE 1.5K 2N7002 12
10 1uF
3 GATE COMP 12
R419
GND1 GND1 POK POK
BL-DIM1(VSYNC)
S
R488 R489 13
GND1 4 GND PWMI 11 R442 LED_CN1_K
Q491 R492 C491 C492 R495 C494 C474 C473 +24V5 +24(AL2_DVBS)
CS 10k 0 1K 2K 1uF 100nF 14
5 CS OVP 10 820
C490 KST2222A 100K 2.2uF 2.2uF 100nF GND1 GND1
R415 PWMO R420 OVP PWMO D R490 1-1735446-4
6 RT PWMO 9 G 100pF GND1GND1
10 10K Q402 680K
7 SYNC REF 8
C406 R423 D403 S KF3N40W
330pF VREF open MMSD4148 GND1 CN2-1316
2.2uF
C408
MAP3202
LED_CN1_A 1
C408A C403 R444 R443 Anode 1+
N.C. 6.8nF FBN
2
NC
R405 R404 GND1 820 820
110K 270K C413 C409 3
Cathode 1-
1nF
R455C
R455G R455H
GND1 R446 R445
R455A
R455E
GND1 OPEN 4
56
NC
56
56
0
C420 820 820
C419
1nF OPEN
5 Anode 2+
R455B
R455F
R455D
R455
OPEN
R455I
R424 6 NC
100
56
56
56
43
10k
GND1 LED_CN1_K 7 Cathode 2-
GND1 SD-53427-07
100K
VREF
R470A
R468
R470
130K
5.1K
EN R469 10K FBP
R460
10K
+12V 150K
VCC R472
D
R483 R464
R630A
R458
R471
C416
10K
39K
R630 R482 10k G Q413
1k
1uF
1k ! PC601 47K 0 2N7002
D
HOT R481 R456
100K
S
EL817MC
R465
10K Q406 G Q412
R631 BL-I-CTRL C415
KST2222A
COLD
R459
1K 2N7002
100K
2.7k OPEN
S
C440 R480 C414
10nF OPEN
100K GND1 GND1 GND1 GND1 GND1
GND1 GND1 GND1 Q222
C622 R632
! BD601 100n 4.7K GND1 AOD407 C292
22nF K 50V +24V5
4A 600V U602
S D
D
S
AS431AN / SMD Q221 R228
R221
10K
L601 SDURF1040CT
R223
R229
G
VLED KST2907
G
56K
16K
3 470K
BFS3510 R511
33uF/200V
47K, 2W
R518 D Q220
12K R220
2200pF
G Q501
C411
R431
4 1 4.3K
C323
1uF D211
R512
R222
15K
KST2222A
2.2K
R240
2K
C506 U501 68 KF5N50FS ! C233 C233A
T501
330k
D220
R622
GND_B
S
R510 L6599 D503 R519 14 50V 47uF 50V 47uF
2
750K 1 CSS VBOOT 16
! TH601 13 GND1 MMSD4148
MMSD4148 22
7.5K
R243
ZD220
R233
HVG 15 1
27K
2 DELAY
C504 C505
6.8V
R520
10K
330k
R624 R623
! 330pF C508 12
3ohm 15D ! ! VCC 220pF 3 CF OUT 14 2
MBRF10100CT
BFS3550R
C644 C645 104 11
C643 4 RFMIN NC 13
L502
330k
68uF 68uF MVCC 3 10 GND1
MK 220uF/35V
MK 220uF/35V
68uF GND_B
5 STBY VCC 12 R521
9 D210
6 ISEN LVG 11 D 4
R211
2.2k
R212
2.2k
C207A
C207
R284
R507 12K
68
NC
G 8
7 LINE GND 10
330k
D504 R522
R625
100K
! LF103 Q510
R501
R508
5
3.3K
C509 7
CS1625075MD 0.1u 8 DIS PFC_STOP 9 S
KF5N50FS
C510 R523
4 3 22u/50V IC-SOP-16-L6599 MMSD4148 22 6
R628
10K
TSA601MA1
D
100 G Q604 EFD4549 GND1
R509 L201
R284A
SA101
STK0160 1N4148 C526 R531 C513
R502
36K
2 1 1.6uH
0
SDB1060PI C208 C209 C215
s
R507A
GND_B
S 47 D512 100pF/1kV 100/1W 12nF/1kV ! CY202 47u/50V 47u/50V 2.2uF
R513
0
C511
0.1uF
68
10nF L501 330pF +12V
R629 C611 C502 C501
R251
100K 1nF
560
2.2nF BFS3550R D212
R284B
C206
! CY103 C222
120 1W
! CY104
0
MMSD4148W 1000uF
COLD
R101
1000uF
R627 R626
10K
470pF 470pF R527 D506 ! CY106
R252A R252
GND1
10K
GND1
ZD503
33
BFS3550A
5.6V
1nF/50V 101
4.3K
L602
C507 PC501 R256 GND1
EL817MC
0
100nF 3.6kF
1.5K
R255
! CX102 C210 R254
D101 1uF 1K
! LF102 U203
4 3 IN4007 ! PC502 AS431AZ
EL817MC
R253A
D102 D103 TH101
0
2 1
GND1
CS1625075MD
IN4007 IN4007 10D9 ! L301
T101
2.7K
R253
C119 D301 ST3V3
5 10
R111
OPEN
P6KE180A
1nF/1KV 5mm SB140

ZD101
3 9
4.7uH
4
GND1
R113 IN4007 8
+24V5
STVCC D107 R105 R311 C306
STVCC Q112 1 7 C301
ZD110 OPEN 200 D106A 3.3k 47u/50V +12V
1/2W NC R122 1000V 1A 0 MK 1000uF/10V
Q110 2 6
!R101A OPEN OPEN
OPEN C121 EFD2020
CAP002DG STVCC C102
S 8
S 7
NC 6
D 5
5 4 ZS47uF/50V R235
OPEN
LT 450V 4.7uF
LNK362
R112
OPEN
D114 GND1 1k
U101
Q110A
R118
6 3 R305
VCC MMSD4148 OPEN R302
! 7 2 R122A ZD110A Q112A
3 BP
4 FB
! R101C 2.7K
1 S
2 S
1/2W 750k R101B R231 R244

8 1 1/2W 750k OPEN 100F
1.5K
OPEN 9.1k
R303
18K
OPEN
OPEN
OPEN
R118A
BASE MVCC
R117A
R120
10K
U110 Q111 56K F C304 R234

OPEN
R304
R112A
KST2907A R123
! 1k
C101 47pF/1kV PC101
EL817MC 750 0.1uF
BASE
R121
43K
100nF D110 C303 R306

0.1uF
C107
R117 R119
ZD104
ZD103
1.5K
5.1V
7.5V
OPEN OPEN OPEN D115 U301

! CX101 MMSD4148
2.2uF
AZ431L R307
C115 R308 U206 U207
4 3
120 KIA2431AS TSM KIA2431AS TSM C221
2200pF/ 630V C118 47
! LF101 2 VCC R109 R230 C220 1nF
1 D116 R126 R125 R124 1nF R309 GND1 R242
U102 Q101 1.8K 1nF
CH040031 1.8K
AS431A R110 KST2222A 1K
RF101L4S 51K 51K 220K 4.7K
510K
C109
R128
750V 14A GND1 GND1

10K R310
! PC102
ZD102
ZS 22uF/50V STANDBY
15V
! VA101 EL817MC 1K
F101 ! R127 C116 C117 Q301
0.1uF
T3.15AH 250V 510K 1W 47nF 47nF GND_B
KST2907A C305
GND1
Live Neutral
2
4 2011-03-08
AC-inlet
! CN1_1308 Power Supply Unit with 2722 171 90361
Integrated Led Driver PLDE-P017A B
19154_001_120109.eps
120109
2012-Feb-03 back to
div. table
10-2-2 Layout top
4 2011-03-08
Layout top 2722 171 90361

PLDE-P017A B
19154_002_120109.eps
120109
2012-Feb-03 back to
div. table
4 2011-03-08

PLDE-P017A B
19154_003_120109.eps
120109
2012-Feb-03 back to
div. table
10.3 A 272217190441 PSL

Power Supply Unit with

A01 Integrated Led Driver ! L402
150uH
A01
5 8
LED_CN3_A
! L401 D402 R454

LED_CN2_A SB3200
33uF/200V
150uH R424 62K
C414
62K CN2_1316
VLED
5 8
R450 R473 R475 1
D401 ISEN1 LED_CN3_A LED1A
VREF R421 62K 8.2K
1.8K
33uF/200V
SB3200 2
D
R414 62K NC
R412 R451 R413 C416 R448
C413
UVLS 1K
130K 130K 10K 100nF 62K G Q407 C470 3
LED1K
POK R423
2N7002 10nF/2012 4
NC
62K C433
R449
S
GND1
R441 47nF LED_CN2_K 5
LED2A
D 3K
47K G Q401 C422 GND1
6
+12V VREF R415 R422 NC
7002 47nF
R411 C409 2K 3K R461 D
R474 R476 7
S G Q404 LED_CN3_K LED2K
10 1uF GND1 ISEN2
C410 D MDHT3N40 1.8K 8
R416 G GND1 1.5K 8.2K
D
BL-ON-OFF GND1 47nF Q403 S
56K
LED_CN2_A 9
R410
GND1 R470
S
AOD450 R462 C432 R477 G Q408 C472 LED3A
VREF 120 R463 C419 10k 1nF 10
10K D 10K 2N7002 10nF/2012 NC
C407 R409 C408 10k open
R468G R468H
G 11
LED3K
S
100nF 100K
2.2u
U401 Q402 R472
open R467
0
R408 1 24 R417 AOD450 R464 R465 R466 100k 12
NC
UVLS FAULT S
120 R442 C471 R445 R471 1 1 1 OPEN
47K 13
2 VCC DRV1
23 10k 1 GND1
LED4A
R468A
R468I
R468C
R468D
R468B
R468E
1k
R468F
OPEN
VREF
R468
14
3 22
300
NC
18
18
18
18
18
18
68
ENA DRV2
VREF R446
15
4
VREF GND
21 R443 R444 OPEN LED_CN2_K LED4K
R419 1k 1 1 GND1
53426-1510
R438 GND1 R426 5 20
R407 RT ISW1 GND1
100K 10K
56K 6 19
BL-DIM1(VSYNC)
SYNC OVP1
GND1 LED_CN3_K CN4_1M95
7 18
R491 R492 1
R452 PWM1 PROT1 ST3V3 3V3stdby
C423 10K
10k 8 17 D 120k 2
open PWM2 ISEN1
ISEN1 R457 STANDBY Standby
G
GND1
9 16 Q405 3
ADIM ADIM ISW2
1.5K GND1 GND1
MDHT3N40
10 15 S 4
TIMER OVP2 R456 BL-I-CTRL GND1 GND1
C434
11 14 10k R496 R490 5
R455G R455H
SSTCMP1 PROT2 1nF
OPEN OPEN R493 R494 +12V +12V
R434 R434A 75K 6
0
12 13
SSTCMP2 ISEN2
OPEN +12V +12V
12K 18K R432B R432C C493 ADIM
C402 R402 R403 ISEN2 7
56K 56K
OZ9902 10nF +24V5 +Vsnd
1uF 12K 18K R497 R495
R455C
R455D
R455A
R455B
R455E
R455F
R434B 12K R434C 18K
R455
IC-SOP-24-OZ9902
8
R455I
OPEN
GND1 GND_SND
18
300
OPEN 220k
18
18
18
18
18
68
R432 R432A 9
BL-ON-OFF BL-ON-OFF
C403 C404 C405 C406 C401 GND1
12K 18K 10
1n 470nF 1n 470nF 0.47u GND1
BL-DIM1(VSYNC) BL-DIM1(Vsync)
GND1
C428 C429 C430 C431 11
+12V BL-I-CTRL BL-I-CTRL
GND1 OPEN OPEN OPEN OPEN 12
VCC POK POK
R630A 13
1k R482 UVLS +24V5 +24(AL2_DVBS)
R630
! PC601 47K 14
1k GND1 GND1
R481
EL817MC 1-1735446-4
HOT R631
2.7k
10K Q406
KST2222A
COLD
C440 R480
10nF 100K
C622 R632
GND1
100nF 4.7K
U602 Q222
AS431AN / SMD
22nF K 50V
AOD407
L503
+24V5
S D
C292
15KJ 1/8W 10KJ 1/8W
D
S
BFS3510 Q221
16KF 1/8W
56KJ 1/8W
D601 D601A SDURF1040CT R228
R221
BD601
G
!
R223
R229
VLED KST2907
G
3
4A 600V
12K J 1/8W
R511 470KJ 1/8W
S3V60 S3V60 D602
33uF/200V
2200pF K 50V
D
68K, 2W
R518
R220
2.7KF 1/8W
4 1 Q220
C411
R431
G
4.3K 1uF D211
C223
KST2222A
R512
R222
R240
2.2K
! BYV25X-600 C506 U501 68 Q501 ! C233 C233A
T501
330k
S D220
R622
BFS3550A
2
C601 R510 L6599 D503 R519 KF5N50
10
!
L603
14
ZS 50V 47UF ZS 50V 47UF
6
7
8
9
1 16
7.5KF 1/8W
EER2025 170uH
0.47uF 750 CSS VBOOT

TH601 MMSD4148W 10 13
GND1 MMSD4148
R243
2 15
R233
27K
ZD220
1
VCC C504 DELAY HVG
6.8V
C505
R520
10K
330k
L601
R623
330pF 12 MBRF10100CT
220nF 3 14
BFS3550R
3ohm 15D CF OUT C508 2
11
CY105 4 13 100nF
! ! RFMIN NC
R615
470k
330k
R624
VCC
C645 68uF/450V
GND1
open MVCC
C644 68uF/450V
3 10
L502
5
4
3
2
1
5 12
MK 220uF/35V
MK 220uF/35V
COLD STBY VCC R521
47pF
47pF
CY106 D210
47pF
Q602 9
open 6 11 D 4
MDF11N60 ISEN LVG
R507 12KF
68
91K
C207
R284
C207A
G
R628
470k
GND1
D
R616
100
D 8
7 10
330k
R609 LINE GND D504 R522
R625
3.3KF
R501 Q510
R508
5
G G 0.1u 7
! LF103
U601 C509 100K 8 DIS PFC_STOP
9 R523
S
KF5N50
C610A
C610B
C510
C610
IC-SOP-8
120 10
470k
MMSD4148W
R617
1 8 6
4 3 ! ! 22uF M 50V IC-SOP-16-L6599
D603 R608 D512
S
S
D 10K
EFD4549
R610
10k
2 7
Q604 GND1
C602
C604 C608 MMSD4148 30
G
R509
R531
L201
2 1 STK0160 1N4148 C526 1.6uH C208 C209 C215
36K
R502
3 6
100nF 100nF 12nF/1kV
SDB1060PI
10nF 100pF/1kV 100/1W
R507A
470k
S 47
R618
CS1615170MA02FF R604 47u/50V 47u/50V 2.2uF
C511
0.1uF
0
R513
4 5
!
56
68K 10nF C513 L501 +12V
FA5591 R629 C611 C502 C501 CY501
R605
43/2012
TSA601MA1
47K
22K F
100K 1nF
R602
R603
C605 C699 2.2nF BFS3550R 220pF D212

SA101
BFS3550A
C603 D
R251
10nF 2.2nF
5.1K
470nF VCC R612 C222 C206
s
G
MMSD4148W
L602
COLD 1000uF 1000uF

10K
R626
100 R621 Q603 R527 D506

S
STK0160 GND1
GND1 1nF 33
! CY104 CY103 C607 100k C507
! ZD503
4.3K
R252
R627
R256
10K
470pF 470pF C626 100nF/50V 5.6V ! PC501 GND1
2W 0.12
2W 0.12
R101
120
! CX102 10nF EL817MC

R614
3K
R633
680nF
R255
1.5K
R619
12k
1nF C210 R254

C606
R620
120
470nF 1K
! LF102
4 3
U203
! PC502 AS431AZ
R253
2.7K
EL817MC
2 1 D101 GND1
CS1615170MA02FF ! T101 GND1
IN4007 EFD2020 L301
D102 D103 TH101 C119 D301 ST3V3
5 10
P6KE180A
IN4007 IN4007 10D9 1nF 3 9 SB140 4.7uH

ZD101 C306
4 C301
IN4007 8 47u/50V
R113 D107 1000uF
R105
1 7
200 D106A GND1
0
2.7K
CAP002DG
R305
1000V
5 4 2 6 R302
2W 510k +24V5
6 3 D114 100F +12V
jumper VCC C121
1.5KF
C102 CY202
0.1uF
R303
C304
8
MMSD4148 47uF R304

LNK362
7 2
S
NC
! R101B ! 450V 4.7uF NC

U101
750
8 1 R101C !
R120 MVCC PC101
U110 EL817MC R235
Q111
BP
FB
S
10K KST2907A 1k
1
1.5K
R306
C101 47pF/1kV
R123
R231
56K
CX101 R121 U301

! 2.2uF R227
AZ431L
R307
120
43K R308 9.1K
C303 18K
0.68uF R234
D115 47F
MMSD4148 ! PC102 1k
C107
0.1uF
4 3
R109
ZD104
EL817MC R309 GND1

ZD103
!
5.1V
7.5V
LF101 1K
2 1
C115 4.7K
CH040031
2200pF R310
C118 STANDBY AS431AN / SMD
! VA101 VCC Q301 1K
D116 1nF U206 U207
R126 R125 R124 Q101
750V 14A U102 KST2907A AS431AN/SMD
0.1uF
51K 51K AS431A R110 KST2222A C305 R230 C220 C221
RF101L4S 220K
510K
C109 R224
R128
10K GND1 1.8K 1nF 1nF

! 1.8K
ZD102
ZS 22uF/50V
15V
F101 T3.15AH 250V GND1 GND1

R127 C116 C117
47nF
510K 2W 47nF
Live Neutral
2
1
CN1_1308 4 2011-01-30
!
AC-inlet
Power Supply Unit with 2722 171 90441
Integrated Led Driver PLDG-P009A
19154_004_120109.eps
120109
2012-Feb-03 back to
div. table
10-3-2 Layout top
4 2011-01-30
Layout top 2722 171 90441

PLDG-P009A
19154_005_120109.eps
120109
2012-Feb-03 back to
div. table
4 2011-01-30

PLDG-P009A
19154_006_120109.eps
120109
2012-Feb-03 back to
div. table
10.4 B 715G4722 SSB Berlinale

10-4-1 System Power 1
System Power 1
B01 B01
POWER_DET
POWER_DET 13
+12V_DET
+12V_DET 13
DC POWER INPUT STANDBY POWER 3V3SB from STB_PWR3V3 ANALOG POWER AVDD1V2 from AVDD3V3
OPWRSB
BRIGHT_ADJ
OPWRSB 4
BRIGHT_ADJ 11
INVERTER_ON_OFF INVERTER_ON_OFF 11
AVDD3V3 AVDD1V2
U7002 G1117T63Uf GND 3,4,5,6,7,8,9,10,12,16
3V3SB R7002
STB_PWR3V3 FB7002 120R/600mA 3 2
VIN VOUT
0R05 4A 1/4W
1 2
GND
C7002 C7003
TH
10uF 10V 22uF 10V
+ C7005
4
C7004 100N16V
TP7004
TP7003
TP7005
TP7002
TP7001
TP7007
TP7006
100UF 16V
R7003
120R 1% 1/10W
C7006 R7004
CN7001 R7009 100R 1/16W 5% STANDBY NC/10U 10V
1R 1%
1 STB_PWR3V3 C7007
2 NC/22uF 10V +12V
3 3V3SB
4 FB7008 120R/3000mA
5 1 2
+12V
6 FB7009 120R/3000mA R7022
7 R7006 0R05 4A 1/4W 1 2 10K 1/16W 5%
+24V +12V +12V
8 R7046
9 INVERTER_ON_OFF R7234 NC/4.7K1/16W
10 BRIGHT_ADJ + C7048 PWR_ON NC/10K 1/16W 5%
11 C7047 100N16V
12 220UF 16V R7012 R7045 R7049
13 Q7008 47K 1/16W 5% R7011 100K1/16W 100K1/16W
14 BC847C Q7003 10K 1/16W 5% OPWRSB
BC847C
R7010 STANDBY +12V_DET POWER_DET
10K R7047
CONN R7008 22K 1/16W 5%
10K 1/16W 5% R7048 R7050
27K 1/16W 5% 22K 1/16W 5%
+12V to +5V_SW by VCCK

+12V
L7002 +5V_SW
10uH R7023
2
0R05 4A 1/4W
2
NC/SS3P4
FB7007 10N 50V
U7007 IC D7002
3V3SB C7043 9 R7026 C7034
220R/2000mA
1 GND 8 DA 120K 1/10W 1% 100N16V
1
NC/1.5nF 50V
BS SS
NC/470uF 10V
2 7
C7032
1
IN EN C7008
C7030
3 6
C7046 C7033 4 LX COMP 5 22uF 10V
R7042
2KOHM 1/10W
R7044
10K 1/10W 100N16V 10uF 16V
GND FB TUNER POWER +5V_TUNER from +12V
G5795F11U
+12V
FB7001 220R/2000mA +5V_TUNER
R7028 R7027 R7233 U7001 AS7805DTR-E1
R7043 27K 1/10W 1% NC/18 OHM 2W
4.7K1/16W 1 2 1 3
3
47K 1/16W 5% IN OUT

100N16V
1 Q7007 R7039 C7035 C7042

C7031
MMBT3904 NC/4.7K1/16W 1UF 16V 10N 50V

NC/180P 50V C7041
GND
3
R7041 R7034 C7018 C7019 C7020 C7021

CB
2
VCCK 1 Q7006 C7044 0R05 4A 1/4W + 330NF 16V 10uF 16V 100N16V 22uF 10V
MMBT3904
2
10K 1/16W 5% NC/10U 10V R7030 C7057
2
100UF 16V
5K1 1/16W 5%
RA
CORE POWER VCCK (1.12V/Max. 2.25A) from +12V by PWR_ON

+5V_SW
+12V DVDD3V3 AVDD3V3
L7001 VCCK
2
4.7UH R7014
2
FB7005
0R05 4A 1/4W 120R/3000mA FB7006
R7013
2
U7004 NC/SS3P4 0R05 4A 1/4W 220R/2000mA

FB7004 10N 50V D7001 U7005 G1084TU3UF
C7010 9 R7018
DA
1
220R/2000mA GND 3 2 1 2
1 8 4.7KOHM 1%
1
+
NC/1.5nF 50V
BS SS C7025 VIN VOUT

NC/470uF 10V
2 7 C7026
ADJ/GND
C7016
1
IN EN 22UF 6.3V 100N16V

C7017
3 6
C7045 C7011 LX COMP 100UF 16V + C7028
4 5
GND FB C7027 100N16V R7020
100N16V 10uF 16V 130R 1%
G5795F11U
1
+ 100UF 16V
R7015 C7023 C7029
PWR_ON R7019 100N16V C7022
10uF 10V
18K
0R05 1/16W
100N16V
R7016 C7012 C7014

C7015
2K 1/16W 5% 0.1uF 50V R7021

10N 50V
NC/180P 50V C7013
220R 1%
R7017
1.2K 1/16W 1%
1B 2011-03-19
System Power 1
715G4722
19080_532_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-2 System Power 2
System Power 2
B02 B02
PANEL_VCC_ON/OFF PANEL_VCC_ON/OFF 13
PANEL POWER PANEL_VCC from +12 V GND
GND 2,4,5,6,7,8,9,10,12,16
ANALOG POWER for PWMDAC 3.3 V
ADAC_PWR AVDD3V3
+12V PANEL_VCC
+5V_SW U7006
NC/G1117-33T63Uf
R7032 R7031
3 2
VI VO
NC/0R051/8W 0R051/8W
GND
+ C7036
4
Q7004 NC/100UF 16V +
C7037
8 1
4
D D NC/100UF 16V
7 2
6 D D 3
5 D D 4
S G
Si5403DC-T1-GE3 +
R7035
10K 1/10W C7039 1UF 16V C7038
100UF 16V
R7036 7K5 1/10W 5%

R7037
5.1K
PANEL_VCC_ON/OFF R7038 10K 1/16W 5% Q7005

BC847C
SMD/0402
C7040
4.7uF 10V
1B 2011-03-19
System Power 2
715G4722
19080_533_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-3 Peripheral
Peripheral
B03 B03
MT5366 U4001A
NAND Flash 1
U4005
48
3V3SB TCON_SCL
TCON_SDA
TCON_SCL
TCON_SDA
11,17
11,17
2 NC NC 47 R4030
JTCK R4 AB8 U0TX NC NC OSDA1
JTCK U0TX 3 46 0R05 1/10W OSDA1 7
JTDI T1 AC7 U0RX NC NC OSCL1 OSCL1 7
JTDI U0RX DVDD3V3 4 45
JTDO R3 NC NC RC6
JTDO 5 44 PDD7 RC6 5
JTMS T3 U2 TCON_I2C_ON_OFF TP4024 TP 330R 1/16W 5% NC I/O7 U0TX
JTMS U1RX 6 43 PDD6 U0TX 5,10
JTRST# T2 U1 KEY_I2C_ON_OFF TP4025 TP R4025 NC I/O6 U4007 U0RX
R4023
JTRST_ U1TX DVDD3V3 PARB# 7 42 PDD5 U0RX 5,10

POOE# 8 RB I/O5 41 PDD4 1
10K 1/10W
OSDA0 J22 J19 POWE# R4027 R I/O4 GND OPWRSB

OSDA0 POWE_ R4107 4K7 1/10W 5% DVDD3V3 POCE1# 9 40 3 OPWRSB 2
OSCL0 J23 K21 POOE# E NC Vcc OPCTRL4
OSCL0 POOE_ R4108 4K7 1/10W 5% 4.7K1/16W 10 39 2 OPCTRL4 13
K22 POCE1# NC NC RESET OPCTRL5
POCE1_ 11 38 OPCTRL5 13
OSDA1 U4 J21 POCE0# NC NC
OSDA1 POCE0_ VDD_NAND 12 37 VDD_NAND AZ809ANSTR-E1 AOSDATA1
OSCL1 U3 K23 PDD7 VDD VDD AOSDATA1 6
OSCL1 PDD7 13 36 SYS_EEPROM_WP
L23 PDD6 C4042 VSS VSS SYS_EEPROM_WP 13
PDD6 14 35
100N16V
100N16V
OSDA2 T22 L24 PDD5 1UF 16V NC NC
OSDA2 PDD5 15 34
C4041
GND 2,3,5,6,7,8,9,10,12,16
C4040
OSCL2 T23 L25 PDD4 NC NC
OSCL2 PDD4 PACLE 16 33
K20 PDD3 CL NC
PDD3 PAALE 17 32 PDD3 R4038
OXTALI AE19 K19 PDD2 AL I/O3
XTALI PDD2 POWE# 18 31 PDD2 100K1/16W OSDA0
OXTALO AD19 L22 PDD1 W I/O2 OSDA0 14
XTALO PDD1 Flash_WP# 19 30 PDD1 OSCL0
M23 PDD0 WP I/O1 OSCL0 14
PDD0 20 29 PDD0
AVDD33_XTAL_STB AC18 J20 PARB# NC I/O0
21 28 KEY_SDA
AE18 AVDD33_XTAL_STB
AVSS33_XTAL_STB
PARB_
PACLE
J24
J25
PACLE
PAALE
22
23
NC
NC
NC
NC
27
26
Reset IC KEY_SCL
KEY_SDA
KEY_SCL
5
5
PAALE
24 NC NC 25
3V3SB AVDD33_REG_STB AA7 AB9 OPWRSB NC NC
W8 AVDD33_VGA_STB OPWRSB
AVSS33_VGA_STB NAND01GW3B2CN6E
Y8 ORESET#
ORESET_
AVDD12_PLL AB15 AC8 RC6 NAND 128MB
R4104
1.3K 1%
AA17 AVDD12_PLL
AVSS12_PLL
OIRI 4.7K1/16W Serial Flash DVDD3V3 DVDD3V3
E23 FSRC_WR R4028
FSRC_WR
DVDD3V3
AVDD10_LDO AA12 DVDD3V3
AVDD10_LDO
R4026
A25 T8 4.7K1/16W
B25 DVSS VCC3IO M18 R4100 R4103
Y21 DVSS VCC3IO H19 4.7K1/16W 4.7K1/16W
R4036
R4031
R4032
R4033
R4034
R4035
C4043 DVSS VCC3IO DVDD3V3
Y22 V8
4.7uF 10V DVSS VCC3IO DVDD3V3
AB22 U8 U4006
AA23 DVSS VCC3IO N18
AB23 DVSS VCC3IO POCE0# 1 8
1K 1/16W 5%
DVDD3V3 CS VCC
10K 1/16W 5%
10K 1/16W 5%
10K 1/16W 5%
10K 1/16W 5%
10K 1/16W 5%
AC23 DVSS PDD7 2 7
DVSS VCCK R4024 Flash_WP# 3 SO HOLD 6 POOE#
AB24 WP SCK
DVSS 4 5 PDD6
NC/100N 16V
AA20 4.7K1/16W GND SI
CN4002
C4039
Y20 DVSS M1
W20 DVSS VCCK M2 NC/MX25L4005AMI-12G
Y19 DVSS VCCK M3
DVSS VCCK TVTREF#1 1 2
W19 M4
DVSS VCCK JTRST# 3 4
M9 M5
DVSS VCCK JTDI 5 6
H6 M6
DVSS VCCK JTMS 7 8
N9 N1
DVSS VCCK JTCK 9 10
L12 N2
DVSS VCCK 11 12
L13 N3
DVSS VCCK JTDO R4039 13 14
L14 N4
DVSS VCCK 15 16
P9 N5 33 OHM 1/16W
DVSS VCCK JTAG_DBGRQ 17 18
R10 N6
JTAG_DBGACK 19 20
10K 1/16W 5%
10K 1/16W 5%
W21 DVSS VCCK K10
R4040
AC24 DVSS VCCK K11 TCON_I2C_ON_OFF
TCON_I2C ON_OFF
R4041
AB25 DVSS VCCK K9
M11 DVSS VCCK L9
DVSS VCCK NC/CONN
M12 R9
M13 DVSS VCCK K15 Q4150 Q4156
M14 DVSS VCCK K16 TCON_SCL 2N7002 2N7002 OSCL0
M15 DVSS VCCK L10
M16 DVSS VCCK T9
N11 DVSS VCCK T10
N12 DVSS VCCK T11
N13 DVSS VCCK T12
N14 DVSS VCCK T13
N15 DVSS VCCK T14
N16 DVSS VCCK T15 TCON_I2C_ON_OFF
P11 DVSS VCCK T16 R4230
DVSS VCCK
SYSTEM EEPROM NC/100K 1/16W 5%
NC/10uF 10V
P12 L11 DVDD3V3
DVSS VCCK R4042
C4161
P13 L15
P14 DVSS VCCK R15 4K7 1/10W 5% Q4151 Q4157
P15 DVSS VCCK L16 TCON_SDA 2N7002 2N7002 OSDA0
3
DVSS VCCK R4045
P16 R16 NC/0R05 1/10W 2
R11 DVSS VCCK R17 SYS_EEPROM_WP
DVSS VCCK R4102 Q4003
4K7 1/10W 5%
R12 T17
4K7 1/10W 5%
R13 DVSS VCCK 10K 1/16W 5% BC847C
R4043
R4044
R14 DVSS
DVSS R4013
K12 4K7 1/16W 1% U4008
K13 DVSS
DVSS 8 1
M10 VCC A0
N10 DVSS
OSCL0
ǂǂ 7
6 WP A1
2
3
P10 DVSS
DVSS OSDA0 5 SCL A2 4
KEY_I2C_ON_OFF KEY_I2C ON_OFF
K14 SDA VSS
K17 DVSS
DVSS AT24C128BN-SH-T
L17
DVSS Q4158 Q4159
N17
DVSS KEY_SCL 2N7002 2N7002 OSCL0
P17
W17 DVSS
V19 DVSS
DVSS MT5366CHGG
3.3V IO Power 27 MHz CRYSTAL

X4002 27MHz KEY_I2C_ON_OFF
DVDD3V3 R4231
OXTALI 1 2 OXTALO NC/100K 1/16W 5%
NC/10uF 10V
C4162
Q4160 Q4161
C4045 C4044 KEY_SDA 2N7002 2N7002 OSDA0
C4046 C4047 C4048 27P 50V 27P 50V
4.7uF 10V 100N16V 100N16V
Analog Power
3V3SB 3V3SB AVDD1V2
R4054 STRAPPING
R4052 AVDD33_XTAL_STB R4053 AVDD33_REG_STB 0R05 1/10W AVDD12_PLL 2nd I2C
0R05 1/10W 3V3SB
0R05 1/10W DVDD3V3 DVDD3V3 R4047
C4049 C4050 C4051 R4046 NC/10K 1/10W 5% 10K 1/10W
C4052 100N16V 100N16V 100N16V OPCTRL5
10uF 10V
R4048 R4049
4K7 1/10W 5% 4K7 1/10W 5% R4051
R4050 NC/10K 1/10W 5% 10K 1/10W
OPCTRL4
Core Power OSDA1

OSCL1
DVDD3V3
R4056
VCCK R4055 10K 1/10W 5% NC/10K 1/10W
AOSDATA1
+ C4053
NC/100UF 25V
C4054
4.7uF 10V
C4055
100N16V
C4056
100N16V
C4057
100N16V 3rd I2C
DVDD3V3 DVDD3V3
R4057 R4058
4K7 1/10W 5% 4K7 1/10W 5%
C4058 C4059 C4060
100N16V 100N16V 100N16V
OSDA2
OSCL2
1B 2011-03-19
Periperal
715G4722
19080_534_110319.eps
110408
2012-Feb-03 back to
div. table
10-4-4 Connector/USB/RS232
Connector/USB/RS232
B04 B04
LIGHT_SENSOR_IN
LIGHT_SENSOR_IN 13
TO IR/KEY BOARD KEY_UP_DN_DCSW
KEY_MENU_L_R_SOURCE
KEY_UP_DN_DCSW 13
KEY_MENU_L_R_SOURCE 13
LED_R
LED_R 13
LED_G
LED_G 13
RC6
3V3SB RC6 4
3V3SB 3V3SB LCD_clock_SCL
LCD_clock_SCL 13
TO KEY PAD BOARD LCD_clock_SDA LCD_clock_SDA 13
1
USB_PWR_EN0 USB_PWR_EN0 13
FB4002 USB_OC_COM
600R/200mA USB_OC_COM 13
R4059 R4060 USB_DP0 USB_DP0 11
NC/3.9K 1% NC/3.9K1/16W USB_DM0
CN4003 USB_DM0 11
U0TX
2
U0TX 4,10
R4063 U0RX U0RX 4,10
KEY_UP_DN_DCSW 100R 1/10W 1% Key1 ǂǂ LIGHT_SENSOR 1
2
RC6 R4067 100R 1/10W 5% 3
KEY_MENU_L_R_SOURCE Key2 GND 2,3,4,6,7,8,9,10,12,16
Green_Button R4065 100R 1/10W 5% 4
NC/100R 1/10W 1% 5
NC/10N 50V
R4064 LED_G R4066 16K 1/10W 5% 6
C4064
Key1 7
Green_Button_PWM
NC/100N 50V
NC/100N 50V
Key2 R4068 +5V_SW 8
Green_Button_PWM 13
C4061
C4062
NC/0R05 1/16W R4062
R4061 NC/1K 1/10W
C4066
100N 50V
16K 1/10W 5% CONN KEY_SDA
KEY_SDA 4
100N 50V
2.2uF 10V
KEY_SCL KEY_SCL 4
C4065
C4063
For LCD Clock
CN4005
6
NC/CONN
3V3SB 1
LCD_Clock_SDA NC/100R 1/10W 5% R4070 2
LCD_Clock_SCL NC/100R 1/10W 5% R4069 3
4
+5V_SW 5
CN4004
7
KEY_SDA 1
2
KEY_SCL 3
CONN
USB PORT +5V_SW

1
CN4007
D4003 USB CONN
NC/BAV99 D4004
6
NC/BAV99
3
4
4 3 2 1
USB_DP0 R4074 0R05 1/16W 3

ǂǂUSB_DM0 R4075 0R05 1/16W 2
1
2
FB4003
5
220R/2000mA +
+5V_SW C4067
100UF 16V
t
1 2
TH4001 PTCR
C4068
C4069
NC/100N 16V
10uF 10V
NC/10U 10V
LIGHT SENSOR
C4070
DVDD3V3
R4076
U4009 NC/10K 1/10W
R7230
5 1 NC/1K 1/10W
IN OUT 2
USB_PWR_EN0 4 GND 3USB_OC_COM
EN OC R7229
R4077 DVDD3V3 LIGHT_SENSOR LIGHT_SENSOR_IN
NC/G5250M1T1U NC/4.7K1/16W 100R 1/10W 5% Green_Button
R4078 C7119 + C7120
NC/4.7K1/16W 10N 50V NC/47U 25V R4015 0R05 1/16W
Q4154 NC/BC847C
LED_R Green_Button
3V3SB
R4206
NC/4K7 1/16W 5%
3V3SB
Q4153
NC/2N7002
1
BAV99
3
BAV99 R4207
D4001
R4079 R4080 D4005 +5V_SW 2 Q4152 +5V_SW
3V3SB NC/BC847C
4.7K1/16W 4.7K1/16W
CN4008 NC/4K7 1/16W 5%
R4208
1
3
3
R4081 Green_Button_PWM DVDD3V3

U0TX 100R 1/10W 5%
---><---|>
U0RX 100R 1/10W 5% 2 NC/4K7 1/16W 5%

---><---|>
1
R4082
PHONE JACK
1B 2011-03-19
Connector/USB/RS232
715G4722
19080_535_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-5 Audio IO/SPDIF/Headphone
Audio IO/SPDIF/Headphone
B05 B05
MT5366
U4001F
SCART1_R_In AE25 Y23 AR0O
SCART1_L_In AB21 AIN0_R_AADC AR0_ADAC AA25 AL0O
AD25 AIN0_L_AADC AL0_ADAC
AE22 AIN1_R_AADC W23 AR1O
VGA_R_In AC25 AIN1_L_AADC
AIN2_R_AADC
AR1_ADAC
AL1_ADAC
AA24 AL1O
TP6002 TP
TP6003 TP
Analog Power SCART1_R_In
SCART1_L_In
SCART1_R_In 9
VGA_L_In AD22 SCART1_L_In 9
AD23 AIN2_L_AADC V24 AR2O ADAC_PWR ADAC_PWR
AB20 AIN3_R_AADC AR2_ADAC Y25 AL2O
AE24 AIN3_L_AADC AL2_ADAC R6002 AVDD33_DAC AVDD33_DAC1
AIN4_R_AADC YPbPr_R_In1
AC21 V25 AR3O YPbPr_R_In1 8
AIN4_L_AADC AR3_ADAC TP6008 TP 47R 1/10W 5% R6003 YPbPr_L_In1
YPbPr_R_In1 AE23 Y24 AL3O YPbPr_L_In1 8
AIN5_R_AADC AL3_ADAC TP6009 TP 47R 1/10W 5% VGA_R_In
YPbPr_L_In1 AC20 + C6003 + C6005 VGA_R_In 10
AD24 AIN5_L_AADC V22 AVDD33_DAC 470uF 10V C6002 470uF 10V C6004 VGA_L_In
AIN6_R_AADC AVDD33_DAC VGA_L_In 10
AC22 V23 AVDD33_DAC1 100N16V 100N16V
AIN6_L_AADC AVDD33_DAC1
SCART1R_PA
AVDD33_AADC AA19 SCART1R_PA 9
AVDD33_AADC SCART1L_PA
AA21 AA22 SCART1L_PA 9
AVSS33_AADC AVSS33_DAC W22 SPDIF_OUT
AVSS33_DAC1 SPDIF_OUT 14
AOSDATA1
VMID_AADC AA18 AVDD3V3 AOSDATA1 4
VMID_AADC AOMCLK
V21 AU_DIN TP6004 TP AOMCLK 7
ALIN R6004 AVDD33_AADC AOBCLK
V20 SPDIF_OUT AOBCLK 7
C6007 C6008 ASPDIF AOLRCK
T21 AOBCLK AOLRCK 7
100N 50V AOBCK 0R05 1/10W AOSDATA0
1UF 16V U24 AOLRCK AOSDATA0 7
AOLRCK U25 AOMCLK C6006 HP_SC_MUTE
AOMCLK HP_SC_MUTE 9
R21 AOSDATA4 100N16V SP_AMP_MUTE
AOSDATA4 TP6001 TP SP_AMP_MUTE 13
R20 AOSDATA3 TP6005 TP OFF_MUTE
AOSDATA3 T19 AOSDATA2 OFF_MUTE 7,9
AOSDATA2 TP6006 TP
U23 AOSDATA1
AOSDATA1 T20 AOSDATA0
AOSDATA0 GND 2,3,4,5,7,8,9,10,12,16
MT5366CHGG
Earphone R/L output

SCT Audio Out 3V3SB
R6028
R6072 HPOUTL
R6006 10K 1/16W 5% 10OHM1/10W
30K OHM +-1% 1/16W
D6002 FB6003
C6009 R6009 33P 50V 1 2
10uF 16V 2 1 +5V_SW
R6007 47K 1/16W 5% C6010 K A 120R/3000mA
AR2O SCART1R_PA C6021 R6029
16K 1% 0R05 1/16W OPAV120 BAS32L 10uF 10V 4.7K1/16W
R6012 R6013
C6012 R6015
NC/100K 1% OPAVREF_R 4.7K1/16W +12V OPAV120 R6030 OFF_MUTE
330PF 50V
R6005 4.7K1/16W
Q6002 R6033 HP_SC_MUTE
17
16
15
14
13
4
3
2
1
100K1/16W U6004
1
BC847C 4.7K1/16W
2IN+ VCC-
2OUT 1IN-
VCC+ 1OUT
1IN+
120R/3000mA R6032
Thermal Pad
OUTL
SGND
AVDD
EN
R6031
NJM4580M-TE1 20K 1% FB6002 1.2K 1/16W 1% C6023 C6026
1.2K 1/16W 1%
U6003 OPAVREF_L R6011 AL0O 1UF 16V 1 12
INL- HPVDD
2IN-
OPAVREF_R ǂǂ C6025

C6029 2
INL+
2.2uF 10V
2
C6024 11
R6014 R6079 2N2 50V 1UF 16V CPP
OPAV120 0R05 1/16W 2N2 50V
20K 1%
5
6
7
8
R6017 R6016
+ C6014 C6036 3 10 C6028
0R05 1/16W 100UF 16V + 100K1/16W INR+ PGND
OPAVREF_L C6013 220UF 16V 0R05 1/16W 1UF 16V 1UF 16V
SCART1L_PA
R6019 R6021 R6080 C6027 4
AL2O INR-
ǂǂ C6030 C6034 9
HPVSS
C6016 2N2 50V 2N2 50V CPN
OUTR
16K 1% 47K 1/16W 5% 33P 50V R6040 1UF 16V
10uF 16V C6017 AR0O
G0
G1
R6023
4.7K1/16W R6039 1.2K 1/16W 1%
30K OHM +-1% 1/16W
R6024 1.2K 1/16W 1%
8
C6018 R6022 TPA6132A2RTER
NC/100K 1% 330PF 50V
C6039 2.2uF 10V
G0
G1
+5V_SW +5V_SW
R6051 10OHM1/10W
R6047 HPOUTR
R6048
NC/10K1/16W 10K 1/16W 5%
G0 G1
R6049 R6050
NC/0R05OHM1/16W
0R05 1/16W
SPDIF OUT +5V_SW

2
D6006
A K
NC/BAS316 CN6003
C6019 HPOUTR 3
R6026 100N16V CN6002
1
SPDIF_OUT 2
---><---|>
2
240R 1/10W 5%
NC/VPORT0603100KV05
HPOUTL 2
100R 1/10W 5%
1
ZD6001 R6027
C6020 1 PHONE JACK
33P 50V C6033
RCA JACK 100N 50V C6035
1
100N 50V
1B 2011-03-19
Audio IO/SPDIF/Headphone
715G4722
19080_536_110319.eps
110331
2012-Feb-03 back to
div. table
10-4-6 Speaker/Sound woofer
Speaker/Sound woofer
B06 B06
3V3SB AUD_V33
FB6004 220R/2000mA SOE
AUD_VCC SOE 17
+24V 1 2
OSDA1
FB6006 220R/2000mA OSDA1 4
R6078 OSCL1
DVDD3V3 AUD_V33 OSCL1 4
1 2 AUD_VCC 4.7K1/16W OFF_MUTE
FB6005 OFF_MUTE 6,9
R6090 AMP_MUTE
AMP_MUTE 13
10K 1/16W 5% I2SAMP_RESET
1 2 C6045 AMP_RESET I2SAMP_RESET 13
C6044 AOMCLK
120R/600mA AOMCLK 6
AOBCLK
+ + AOBCLK 6
C6041 100N 50V AOLRCK
C6042 C6043 1uF I2SAMP_RESET R6089 Q6004 C6001 AOLRCK 6
4.7uF 10V NC/1uF 25V AOSDATA0
NC/330UF 35V 330UF 35V 22K 1/16W 5% BC847BW AOSDATA0 6
GND 2,3,4,5,6,8,9,10,12,16
Mute_339 R6091
NC/4.7K1/16W
L6002 AMP_MUTE R6094

NC/4.7K1/16W AUD_VCC
33uH 20%
C6046 C6047
100N 50V R6052

1uF
NC/3.4K 1%
22 OHM 1/4W
R6082
Sound R/L CKT C6058
AUD_VCC C6071
NC/3.4K 1%
AUD_VCC
R6084
NC/330PF 50V C6048
6.2R
100N 50V
+
AUD_V33 C6054 C6065
NC/0.22uF 50V C6052 C6075
R6053
C6050
330PF 50V C6081 NC/100UF 35V
NC/3.4K 1%
100N 50V
+
220N 50V
R6085
AUD_V33 VDD_PLL TP TP6012 EAPD 1N 50V
100N16V L6003 NC/100UF 35V
TW
R6054 C6053
TP TP6013
I2S AUDIO AMP 33uH 20% C6102
NC/0.22uF 50V
CN6004
2.2OHM 1/10W 19 18 DDX3A TP6010 TP
R6055 2K2 1/16W 5% PWRDN 20 EAPD/OUT4B OUT3A 17 DDX3B C6056 CONN
NC/3.4K 1%
TP6011 TP R6081
TWARN/OUT4A OUT3B
R6086
VDD_PLL 21 16
6.2R
100N 50V 100N 50V LSPK+ 1
C6057 C6061 C6059 C6060 22 VDD_DIG CONFIG 15 C6062 NC/22 OHM 1/4W C6077
C6063
100N 50V
C6078 LSPK- 2
PLL_FILTER 23 GND_DIG VDD 14 AUD_VCC NC/100UF 35V
R6057
RSPK- 3
+
100N16V 100N16V NC/100N 16V4N7 50V 680pF 50V 24 PWRDN GND_REG 13 OUT1A
R6056 VDD_PLL OUT1A C6055 RSPK+ 4
0R05 1/10W 25 12
PLL_GND 26 FILTER_PLL GND1 11 AUD_VCC NC/330PF 50V C6076
GND_PLL VCC1
+
XTI 27 10 OUT1B NC/100UF 35V
BICKI 28 XTI OUT1B 9 L6004
LRCLKI 29 BICKI OUT2A 8 AUD_VCC 33UH
SDI 30 LRCKI VCC2 7 OUT2A WSPK+
AMP_RESET R6083 0R05 1/16W 31 SDI GND2 6
TP6007 32 RESET OUT2B 5 C6064 CN6005
INT_LINE VCC_REG
6.2R
OSDA1 A_ONSEL 33 4 100N 50V C6079 CONN
ǂǂ
C6067
SDA VSS R6059
OSCL1 R6065 100R 1/16W 5% A_GAIN 34 3
C6069
SCL TEST_MODE 22 OHM 1/4W 1
R6066 C6066 NC/1N 50V C6068
ǂǂ
R6063
AOMCLK R6058 XTI 100R 1/16W 5% 35 2 2
GND_DIG SA
AUD_V33 36
VDD_DIG GND_SUB
1 100N 50V ǂǂ 3
220N 50V
0R05 1/16W C6098 37 330PF 50V 1N 50V
Thermal Pad C6070 C6080
100N 50V
NC/33P50V L6005
STA339BWTR U6006
NC/1N 50V
AOBCLK R6060
0R05 1/16W
BICKI
OUT2B
33UH
WSPK- WOOFER
(16 Ω/10 W )
C6099 C6074
NC/33P50V 100N16V C6072
6.2R
AOLRCK R6061 LRCLKI 100N 50V
C6073
100N 50V
0R05 1/16W
R6067
C6100
NC/33P50V
AOSDATA0 R6064 SDI
0R05 1/16W
C6101
NC/33P50V
DVDD3V3
Mute CKT
3V3SB
R6068
10K 1/16W 5%
R6069 R6062
10K 1/16W 5% PWRDN
0R05 1/16W
R6070
AMP_MUTE Q6003
BC847BW
22K 1/16W 5%
R6071
4.7K1/16W
+12V 3V3SB Mute_339

2
D6003
A K
BAS316
R6073 R6074
0R05 1/10W NC/0R05 1/10W
D6001
1
D6004
1 2 1 2 OFF_MUTE
A K A K
C6085
BAS316 220UF 16V
+ BAS316
2
1 BC857BW SOE
3
Q6001 D6007
R6075 4.7K1/16W 1 2 R6034 1 Q6005
3
A K NC/4.7K1/16W NC/MMBT3904
2 1 R6076 NC/BAS316
2
K A
1K 1/16W 5%
D6005
BAS316 R6077
100K1/16W
1B 2011-03-19
Speaker/Sound woofer
715G4722
19080_537_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-7 Video IO/YPbPr
Video IO/YPbPr
B07 B07
CVBS_COM
U4001C CVBS_COM 9
MT5366 TU_FAT_IN2- AD17 W12 HSYNC
TU_FAT_IN2+ AE17 ADCINP_DEMOD
ADCINN_DEMOD
HSYNC
VSYNC
W11 VSYNC Analog Power
RP
AC10 RP DVBT Only
AVDD33_DEMOD AC19 AC9 GP AVDD1V2 AVDD3V3 AVDD3V3 AVDD3V3
AVDD33_IFPGA AB19 AVDD33_DEMOD GP AD9 BP 5135_REFCLKM
AVDD33_IFPGA BP 5135_REFCLKP 5135_REFCLKM 15
Y18 AB10 VGACOM R1002 AVDD12_RGB R1003 AVDD33_CVBS R1004 AVDD33_VDAC AVDD33_DEMOD
AVSS33_DEMOD COM 5135_REFCLKP 15
AE9 SOG R1005
SOG AC11 VGASDA 0R05 1/10W 0R05 1/10W 0R05 1/10W 0R05 1/10W RF_AGC_H RF_AGC_H 15,16
AVDD12_DEMOD AB18 VGA_SDA AB12 VGASCL C1002 C1003 C1004 C1005
AVDD12_DEMOD VGA_SCL IF_AGC
Y16 100N16V 100N16V 100N16V 100N16V IF_AGC 16
AVSS12_DEMOD AE11 COM1
COM1 AD12 PB1P
IF_AGC R19 PB1P AE12 PR1P TUNER_BYPASS_OUT
RF_AGC P23 IF_AGC PR1P AD11 Y1P AVDD33_IFPGA TUNER_BYPASS_OUT 9
RF_AGC Y1P TU_FAT_IN2+
AB11 SOY1 TU_FAT_IN2+ 16
SOY1 R1006 TU_FAT_IN2-
5135_REFCLKM AD20 TU_FAT_IN2- 16
LOUTN 0R05 1/10W
5135_REFCLKP AE20 AC13 COM0 C1006
LOUTP COM0 AB14 PB0P 100N16V
PB0P AC14 PR0P YPbPr_R_In1
PR0P YPbPr_L_In1 YPbPr_R_In1 6
AD15 AB13 Y0P AVDD1V2 YPbPr_L_In1 6
AC15 SC0 Y0P AC12 SOY0 +5V_SW
SC1 SOY0 R1008
AE15 NC/10K 1/10W 5% AVDD12_DEMOD
AB16 SY0 AD14 AVDD12_RGB
SY1 AVDD12_RGB R1009 R1007 SOY0
CVBS2P AC16 Y14 SOY0 9
CVBS2P AVSS12_RGB 10K 1/10W 0R05 1/10W Y0P
AC17 RF_AGC RF_AGC_H C1007 Y0P 9
CVBS1P COM0
AB17 100N16V COM0 9
CVBS0P PB0P
CVBS_COM Y15 AA15 VDAC_FS PB0P 9
CVBS_COM FS_VDAC PR0P
W13 TUNER_BYPASS_OUT C1008 PR0P 9
VDAC_OUT1 47N 50V CVBS2P
AVDD33_CVBS W14 Y12 CVBS2P 9
AVDD33_CVBS VDAC_OUT2 TP1018 HSYNC
W16 R1010 HSYNC 10
AVSS33_CVBS AA14 AVDD33_VDAC 560R 1/10W 1% VSYNC
VSYNC 10
AVDD33_VDAC W15 RP
RP 10
AVSS33_VDAC GP
GP 10
BP
BP 10
VGACOM
VGACOM 10
MT5366CHGG SOG
SOG 10
VGASDA
VGASDA 10
VGASCL
VGASCL 10
GND 2,3,4,5,6,7,9,10,12,16
YPbPr & Audio IN

CN1002
2 Y_IN_1 CN1003
A 2 YPbPrL_IN
1 A
1
4 PB_IN_1
B 4 YPbPrR_IN
3 B
3
6 PR_IN_1
C RCA JACK
5
CONN
YPBPR IN
D1001 NC/BAS316
1 2 +5V_SW C1001 1.5nF 50V
A K SOY SOY1
R1001 0R05 1/16W
C1014 10N 50V
Y_IN_1 1 2 R1018 Y1 Y1P
-------><-------
FB1002
R1019 68R 1/16W 5%
80 OHM 18R 1/16W 5%
56R 1/16W 1%
2
ZD1001 C1018
NC/UDZSNP5.6B R1021 15PF50V
R1022 C1019 10N 50V

1
COM1
D1002 NC/BAS316 0R05 1/16W R1023 100R 1/16W 5%
1 2 +5V_SW
A K
-------><-------
C1022 10N 50V

PB_IN_1 1 2 R1028 PB1 PB1P
FB1003
R1029 68R 1/16W 5%
80 OHM 18R 1/16W 5%
56R 1/16W 1%
2
ZD1006
NC/UDZSNP5.6B R1034 C1027
15PF50V
1
-------><-------
1
56R 1/16W 1%
ZD1007 R1037
NC/UDZSNP5.6B FB1004 C1028
80 OHM R1038 15PF50V
2
18R 1/16W 5% C1029 10N 50V

PR_IN_1 1 2 PR1 PR1P
R1040 68R 1/16W 5%
1 2 +5V_SW
A K
D1005
NC/BAS316
+5V_SW
AV AUDIO IN for YPbPr
2
D1006
A K
NC/BAS316
C1036 10uF 10V R1050
1
YPbPrR_IN YPbPr_R_In1
---><---|>
30K 1/16W
C1190
NC/10N 50V
+5V_SW
2
D1007
A K
NC/BAS316
C1037 10uF 10V R1051
1
YPbPrL_IN YPbPr_L_In1
---><---|>
C1191 30K 1/16W

NC/10N 50V
1B 2011-03-19
Video IO/YPbPr
715G4722
19080_538_110319.eps
110331
2012-Feb-03 back to
div. table
10-4-8 Scart
SCART
B08 B08
CVBS_COM CVBS_COM 8
SCART1R_PA
SCART1R_PA 6
SCART1L_PA
SCART1L_PA 6
CVBS2P
SCART (Full SCART) -- CVBS+SV+RGB+TV OUT SOY0
Y0P
CVBS2P
SOY0
Y0P
8
8
8
COM0
PB0P COM0 8
PR0P PB0P 8
PR0P 8
SCART_FS0
SCART_FS0 13
TUNER_BYPASS_OUT
TUNER_BYPASS_OUT 8
SCART1_R_In
SCART1_L_In SCART1_R_In 6
SCART1_L_In 6
OFF_MUTE
22
OFF_MUTE 6,7
HP_SC_MUTE
HP_SC_MUTE 6
1 SCT1_AUR_OUT GND 2,3,4,5,6,7,8,10,12,16
SCT1_AUR_IN 2
3 SCT1_AUL_OUT
4
5
SCT1_AUL_IN 6
7 SCT1_B_IN
SCT1_FS_IN 8
9
10
11 SCT1_G_IN
12
13
14
15 SCT1_R_IN
SCT1_FB_IN 16
17 SCT1_AVO_GND
SCT1_AV1_GND 18
19 SCT1_AV_OUT
SCT1_AV_IN 20
21
CN1005
23
SCART
CVBS IN CVBS OUT ǂǂ

FAST BLANKING/SOY
ǂǂ R1063 C1044
SCT1_AV_IN CVBS2 CVBS2P R1065
TUNER_BYPASS_OUT SCT1_AV_OUT
R1062 0R05 1/16W 0R05 1/16W R1064
2
L1003 1U8 10%
2
100R 1/16W 5% 47NF 16V SCT1_FB_IN SOY0
75R
C1047
0R05 1/10W
2
47pF 50V
ZD1012 R1067 C1048 C1045 C1046 ZD1014

R1066 75R 47pF 50V 47pF 50V NC/47pF 50V R1068
VPORT0603100KV05 ZD1013 75R 1/10W 5%
NC/VPORT0603100KV05
1
NC/VPORT0603100KV05
1
C1013 1uF 10V CVBS_COM
1
RGB IN Audio Output
R1071 C1050
SCT1_B_IN 1 2
R1070
Y Y0P Function Select
FB1005 68R 1/16W 5%
2
80 OHM 0R05 1/16W 10N 50V

C1073 R1053
R1074 C1051 SCART1R_PA SCT1_AUR_OUT
ZD1017
C1040
15PF50V 330R 1/16W 5%
2
75R 10uF 10V R1055
NC/VPORT0603100KV05 R1076 C1052 47K 1/16W 5%
R1075 10N 50V
1
0R05 1/16W 100R 1/16W 5% COM0
NC/10N 50V
ZD1015 R1069
SCT1_FS_IN SCART_FS0
NC/VPORT0603100KV05
51K 1/16W 5%
10K 1/16W 5%
C1054
1
R1079
2
68R 1/16W 5% 10N 50V
SCT1_G_IN 1 2 PB PB0P R1 ZD1016
OFF_MUTE R1054 2
R1073
FB1006 R1078 NC/RLZ13B
2
0R05 1/16W 0R05 1/16W

80 OHM
Q1006
1
1
ZD1019 C1055 HP_SC_MUTE R1056 DTC623TK
R1080 15PF50V
NC/VPORT0603100KV05 75R 0R05 1/16W
1
2
ZD1020
R1081 C1056
FB1007 75R 15PF50V
NC/VPORT0603100KV05 80 OHM R1083 C1057
R1082 10N 50V
68R 1/16W 5%
1
SCT1_R_IN 1 2 0R05 1/16W PR PR0P C1110 R1058

SCART1L_PA SCT1_AUL_OUT
C1043
2
10uF 10V 330R 1/16W 5% R1059
47K 1/16W 5%
ZD1018
NC/10N 50V
NC/VPORT0603100KV05
1
3
Audio Input R1
OFF_MUTE R1060 2
0R05 1/16W Q1008
DTC623TK
HP_SC_MUTE R1061
1
SCT1_AUR_IN C1049 10uF 10V SCART1_R_In 0R05 1/16W

2
R1072
C1192
NC/10N 50V
30K 1/16W
ZD1025
NC/VPORT0603100KV05
1
SCT1_AUL_IN C1053 10uF 10V SCART1_L_In

2
R1077
NC/10N 50V
30K 1/16W
C1193
ZD1027
NC/VPORT0603100KV05
1
1B 2011-03-19
SCART
715G4722
19080_539_110319.eps
110331
2012-Feb-03 back to
div. table
10-4-9 VGA Input
VGA Input
B09 B09
VGA_UR_EN VGA_UR_EN 15
VGA Input U0TX
U0RX
U0TX
U0RX
4,5
4,5
C1058 1.5nF 50V VGA_R_In

VGA_L_In VGA_R_In 6
SOG VGA_L_In 6
R1084 0R05 1/16W HSYNC
C1059 10N 50V VSYNC HSYNC 8
GRN 1 2 G GP RP VSYNC 8
+5V_SW
17
RP 8
- - - - - - - ><- - - - - - -
80 OHM R1085 68R 1/16W 5% GP
GP 8
2
FB1008
75R
VGA_RX 11 1 RED BP
BP 8
1
6 RED_GND ZD1021 VGACOM
C1060 SOG VGACOM 8
VGASDA_IN 12 2 GRN D1008 NC/UDZSNP5.6B SOG 8
K A
7 GRN_GND BAS32L R1086 5PF 50V VGASDA
VGASCL VGASDA 8
HSYNC# 13 3 BLU
1
R1087 C1061 10N 50V VGASCL 8
8 BLU_GND D1009 EDID_WEN
EDID_WEN 13,14
2
VSYNC# 14 4 VGA_TX BAS32L GRN_GND VGACOM
9 1 2 VGA_PLUGPWR 0R05 1/16W R1088 100R 1/16W 5% GND 2,3,4,5,6,7,8,9,12,16
A K
----------><---------|
VGASCL_IN 15 5
NC/UDZSNP5.6B
2
10
CN1001
ZD1022
C1062 10N 50V
D-SUB 15P
16
BLU 1 2 B BP
VGA IN
-------><-------
80 OHM R1089 68R 1/16W 5%
2
FB1009
75R
+5V_SW
ZD1023
NC/UDZSNP5.6B C1063
DVDD3V3 R1090 5PF 50V
1
R1210
NC/4K7 1/10W 5% BLU_GND
R1211
10K 1/10W
NC/100R 1/10W 5%
3
R1209
VGA_UR_EN 2
Q1153 C1064 10N 50V
1
NC/BC847C RED 1 2 R RP
- - - - - - - ><- - - - - - -
80 OHM R1091 68R 1/16W 5%
2
FB1010
75R
R1234
NC/0R05 1/16W ZD1024
NC/UDZSNP5.6B C1065
R1092 5PF 50V
1
NC/2N7002 NC/2N7002
Q1012 Q1013 NC/10uF 16V RED_GND
C1197 NC/10K1/16W
VGA_RX U0RX VGA_TX U0TX R1230
ǂǂ ǂǂ ǂǂ

R1165 R1167
NC/100R 1/16W 5% NC/100R 1/16W 5%
VGA SYNC SLICER VGA EDID

VGA_PLUGPWR
HSYNC# R1094 1 2 HSYNC
0R05 1/16W FB1012 80 OHM VGA_PLUGPWR
2
VGA Audio Input ǂǂ ZD1026
R1095 C1067
NC/UDZSNP5.6B C1070 R1100
NC/2K 1/16W 5% NC/5PF 50V
100N16V 10K 1/10W
1
CN1006 U1004
4 VGA_AudioLIN 1 8
2 E0 VCC 7
3 E1 WC 6 VGASCL_24C02
2 VGA_AudioRIN VSYNC# R1097 1 2 VSYNC 4 E2 SCL 5 VGASDA_24C02
1 0R05 1/16W FB1014 80 OHM VSS SDA
ǂǂ ǂǂ
2
R1098 C1069 M24C02-WDW6TP
3
ZD1028 NC/2K 1/16W 5% NC/5PF 50V R1102
NC/UDZSNP5.6B EDID_WEN 2 Q1009
BC847C
1
10K 1/16W 5%
1
FB1011
600R/200mA
VGA I2C
VGA_AudioRIN 1 2 VGA_R_In
R1093 VGA_PLUGPWR
2
C1066 30K 1/16W

ZD1156 10uF 10V
NC/VPORT0603100KV05 R1205
R1099 VGASCL
VGA AUDIO ǂǂ 10K 1/16W 5%
NC/0R05 1/16W
ǂǂ
1
R1101 R1206
VGASCL_IN VGASCL_24C02
2
----------><---------|
0R05 1/16W
FB1013 ZD1029 100R 1/16W 5%
600R/200mA NC/UDZSNP5.6B
VGA_AudioLIN 1 2 VGA_L_In
1
R1096
2
30K 1/16W
ZD1157 C1068
NC/VPORT0603100KV05 10uF 10V
VGA_PLUGPWR
1
R1103 R1207
ǂǂ 10K 1/16W 5% VGASDA
R1104
NC/0R05 1/16W
R1208
ǂǂ
VGASDA_IN VGASDA_24C02
2
----------><---------|
0R05 1/16W
ZD1030 100R 1/16W 5%
NC/UDZSNP5.6B
1
1B 2011-03-19
VGA Input
715G4722
19080_540_110319.eps
110331
2012-Feb-03 back to
div. table
10-4-10 LVDS
LVDS
B10 B10
MT5366 TCON_SCL
TCON_SDA TCON_SCL 4,17
TCON_SDA 4,17
AVDD33_USB_2P AB1
V7
U4001D
AVDD33_USB_2P
AVSS33_USB_2P
AVDD33_LVDSA
AVDD33_LVDSA
E18
E19
AVDD33_LVDSTX LVDS OUTPUT USB_DP0
USB_DM0
USB_DP0
USB_DM0
5
5
Panel_12V PANEL_VCC LVDS_CTRL
LVDS_CTRL 15
5K1 1/16W 5%
E16 BRIGHT_ADJ
USB_VRT AC3 AVSS33_LVDSA E17 BRIGHT_ADJ 2
USB_2P_VRT AVSS33_LVDSA FB4004 INVERTER_ON_OFF INVERTER_ON_OFF 2
R4083
NC/120R/3000mA
BL_DIMMING
BL_DIMMING 13
USB_DP0 AB2 F19 AVDD12_VPLL 1 2 BL_ON/OFF
USB_2P_DP0 AVDD12_VPLL BL_ON/OFF 13
USB_DM0 AC1 G19 FB4005
USB_2P_DM0 AVSS12_VPLL GND 2,3,4,5,6,7,8,9,10,12,16
NC/120R/3000mA
AC2
AD1 USB_2P_DP1 A24 VPLL_TP 1 2
USB_2P_DM1 TP_VPLL TP4003 TP
D17 TX_AE0P
AE0P C17 TX_AE0N C4078
AE0N C19 TX_AE1P R4097 NC/10U 16V
AE1P D19 TX_AE1N NC/10K
AE1N D20 TX_AE2P
AE2P C20 TX_AE2N
60
AE2N C21 TX_AECKP
AECKP D21 TX_AECKN
AECKN
AE3P
D23
C23
TX_AE3P
TX_AE3N
52
TCON-SIGNAL
AE3N C24 TX_AE4P 1 54 RMLV5_P
AE4P RMLV4_P RMLV5_P 17
D24 TX_AE4N 2 RMLV4_P 17
AE4N D25 TX_AE5P 3 RMLV3_P
AE5P RMLV2_P RMLV3_P 17
C25 TX_AE5N 4 RMLV2_P 17
AE5N 5 RMLV1_P
RMLV0_P RMLV1_P 17
A17 TX_AO0P 6 RMLV0_P 17
AO0P B17 TX_AO0N 7
AO0N RMLVCLK_N
A18 TX_AO1P 8 RMLVCLK_P RMLVCLK_N 17
AO1P B18 TX_AO1N 9 RMLVCLK_P 17
AO1N A19 TX_AO2P 10 55 LMLV5_P
AO2P B19 TX_AO2N LVDSTX_AO4P 11 LMLV4_P LMLV5_P 17
AO2N LMLV3_P LMLV4_P 17
A20 TX_AOCKP LVDSTX_AO4N 12
AOCKP B20 TX_AOCKN LVDSTX_AO3P 13 LMLV2_P LMLV3_P 17
AOCKN A21 TX_AO3P LVDSTX_AO3N 14 LMLV1_P LMLV2_P 17
AO3P B21 TX_AO3N 15 LMLV0_P LMLV1_P 17
AO3N A22 TX_AO4P ǂǂ LVDSTX_AOCKP 16 LMLV0_P 17
AO4P B22 TX_AO4N LVDSTX_AOCKN 17 LMLVCLK_P
AO4N LMLVCLK_N LMLVCLK_P 17
A23 TX_AO5P 18 LMLVCLK_N 17
AO5P B23 TX_AO5N LVDSTX_AO2P 19
AO5N LVDSTX_AO2N 20 56 RMLV5_N
RMLV4_N RMLV5_N 17
LVDSTX_AO1P 21 RMLV4_N 17
MT5366CHGG LVDSTX_AO1N 22 RMLV3_N
RMLV2_N RMLV3_N 17
LVDSTX_AO0P 23 RMLV2_N 17
LVDSTX_AO0N 24 RMLV1_N
RMLV0_N RMLV1_N 17
Analog Power 25
26 LMLV5_N
RMLV0_N 17
LVDSTX_AE4P 27 LMLV4_N LMLV5_N 17
AVDD3V3 LVDSTX_AE4N 28 LMLV3_N LMLV4_N 17
R4091 LVDSTX_AE3P 29 LMLV2_N LMLV3_N 17
0R05 1/10W AVDD33_LVDSTX LVDSTX_AE3N 30 57 LMLV1_N LMLV2_N 17
31 LMLV0_N LMLV1_N 17
AVDD3V3 LVDSTX_AECKP 32 LMLV0_N 17
C4072 C4073 LVDSTX_AECKN 33
R4094 AVDD33_USB_2P NC/100N 16V 100N16V 34
DVDD3V3 LVDSTX_AE2P 35
0R05 1/10W
LVDSTX_AE2N 36
C4075 AVDD1V2 LVDSTX_AE1P 37
100N16V R4096 LVDSTX_AE1N 38
0R05 1/10W AVDD12_VPLL LVDSTX_AE0P 39
R4098 LVDSTX_AE0N 40 58
NC/1K 1/16W 5% 41
C4076 C4077 42
NC/100N 16V 100N16V 43
R4099
44
LVDS_CTRL 45
46
NC/1K 1/16W 5% 47
R4109 48
R4101 TCON_SCL NC/100R 1/10W 5% 49
NC/0 OHM +-5% 1/16W TCON_SDA 50
R4110 51 59
NC/100R 1/10W 5%
53
CN4010
NC/CONN
61
Mini LVDS
ǂǂ
ǂǂ TX_AO5P RMLV0_P

TX_AO5N RMLV0_N
RP4013 NC/0OHM 1/16W
LVDSTX_AE4P 1 8 TX_AO4P RMLV1_P
DVDD3V3 +5V_SW DVDD3V3
LVDSTX_AE4N
LVDSTX_AE3P
2
3
7
6
TX_AO4N
TX_AO3P
RMLV1_N
RMLV2_P
BRIGHT ADJUST
LVDSTX_AE3N 4 5 TX_AO3N RMLV2_N
RP4014 NC/0OHM 1/16W R4085 R4086

LVDSTX_AECKP 1 8 TX_AOCKP RMLVCLK_P NC/4.7K1/16W 1K 1/10W
LVDSTX_AECKN 2 7 TX_AOCKN RMLVCLK_N R4084
LVDSTX_AE2P 3 6 TX_AO2P RMLV3_P NC/4.7K1/16W R4087
LVDSTX_AE2N 4 5 TX_AO2N RMLV3_N BRIGHT_ADJ
3
RP4015 NC/0OHM 1/16W R4088 10K 1/10W 5%
LVDSTX_AE1P 1 8 TX_AO1P RMLV4_P BL_DIMMING 1 Q4002 C4071
LVDSTX_AE1N 2 7 TX_AO1N RMLV4_N MMBT3904
LVDSTX_AE0P 3 6 TX_AO0P RMLV5_P ǂǂ 4.7K1/16W 10uF 10V
2
LVDSTX_AE0N 4 5 TX_AO0N RMLV5_N
TX_AE5P LMLV0_P
TX_AE5N LMLV0_N
RP4016 NC/0OHM 1/16W
LVDSTX_AO4P 1 8 TX_AE4P LMLV1_P
LVDSTX_AO4N 2 7 TX_AE4N LMLV1_N
LVDSTX_AO3P 3 6 TX_AE3P LMLV2_P INVERTER ON/OFF DVDD3V3 3V3SB
+5V_SW DVDD3V3
R4089 R4090
RP4017 NC/0OHM 1/16W 2KOHM 1/10W NC/1KOHM +-5% 1/10W
LVDSTX_AOCKP 1 8 TX_AECKP LMLVCLK_P R4092 R4093
LVDSTX_AOCKN 2 7 TX_AECKN LMLVCLK_N 4.7K1/16W
LVDSTX_AO2P 3 6 TX_AE2P LMLV3_P NC/4.7K1/16W
INVERTER_ON_OFF
3
R4095
BL_ON/OFF 1 Q4001 C4074
RP4018 NC/0OHM 1/16W MMBT3904
LVDSTX_AO1P 1 8 TX_AE1P LMLV4_P 4.7K1/16W NC/10U 10V
2

LVDSTX_AO0P 3 6 TX_AE0P LMLV5_P
1B 2011-03-19
LVDS
715G4722
19080_541_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-11 DRAM Interface
DRAM Interface
B11 B11
MT5366 DDR2#1-64Mx16-1066MHz DDR2#2-64Mx16-1066MHz Damping and Termination for CLK
U4001B
RDQ6 D13 C4 1_CAS#
RDQ0 D12 RDQ6//RDQ0 RCAS_//RA0 F9 1_A6
RDQ1 E13 RDQ0//RDQ1 RA6//RA1 C5 1_BA0 U4002 U4003
RDQ7 D11 RDQ1//RDQ2 RBA0//RA2 A7 1_A5
RDQ4 D14 RDQ7//RDQ3 RA5//RA3 F8 1_A4 RDQ0 G8 M8 B_A0 RDQ16 G8 M8 A_A0
RDQ4//RDQ4 RA4//RA4 RDQ1 G2 DQ0 A0 M3 B_A1 DQ0 A0
RDQ5 E12 D5 1_BA1 RDQ17 G2 M3 A_A1
RDQ5//RDQ5 RBA1//RA5 RDQ2 H7 DQ1 A1 M7 B_A2 DQ1 A1
RDQ3 E14 D7 1_A13 RDQ18 H7 M7 A_A2 RCLK0 R4002 CLK0
RDQ3//RDQ6 RA13//RA6 RDQ3 H3 DQ2 A2 N2 B_A3 DQ2 A2
RDQ2 E11 A6 1_A10 RDQ19 H3 N2 A_A3
DQ3 A3
RDQ13 B10 RDQ2//RDQ7
RDQ13//RDQ8
RA10//RA7
NC//RA8
E6 RDQ4 H1
DQ4 A4
N8 B_A4 RDQ20 H1 DQ3
DQ4
A3
A4
N8 A_A4 0R05 1/16W ǂǂ
RDQ11 B15 B7 1_A3 RDQ5 H9 N3 B_A5 RDQ21 H9 N3 A_A5 R4003
RDQ10 A10 RDQ11//RDQ9
RDQ10//RDQ10
RA3//RA9
RA12//RA10
E8 1_A12 RDQ6 F1 DQ5
DQ6
A5
A6
N7 B_A6 RDQ22 F1 DQ5
DQ6
A5
A6
N7 A_A6 ǂǂ 100R 1/16W 1%
RDQ12 A15 F7 1_A11 RDQ7 F9 P2 B_A7 RDQ23 F9 P2 A_A7
RDQ12//RDQ11 RA11//RA11 RDQ8 C8 DQ7 A7 P8 B_A8 DQ7 A7
RDQ15 C11 D6 1_A0 RDQ24 C8 P8 A_A8
RDQ15//RDQ12 RA0//RA12 RDQ9 C2 DQ8 A8 P3 B_A9 DQ8 A8
RDQ9 C15 B6 1_A1 RDQ25 C2 P3 A_A9 RCLK0# R4004 CLK0#
RDQ9//RDQ13 RA1//RA13 RDQ10 D7 DQ9 A9 M2 B_A10 DQ9 A9
RDQ8 C10 RDQ26 D7 M2 A_A10
RDQ8//RDQ14 RDQ11 D3 DQ10 A10/AP P7 B_A11 DQ10 A10/AP
RDQ14 C14 B4 1_CKE RDQ27 D3 P7 A_A11 0R05 1/16W
RDQ14//RDQ15 RCKE//RWE_ RDQ12 D1 DQ11 A11 R2 B_A12 DQ11 A11
RDQ22 G5 A3 1_ODT RDQ28 D1 R2 A_A12
RDQ22//RDQ16 RODT//RODT RDQ13 D9 DQ12 A12 R8 B_A13 DQ12 A12
RDQ23 J5 B3 1_RAS# DDRV RDQ29 D9 R8 A_A13
RDQ23//RDQ17 RRAS_//RCAS_ RDQ14 B1 DQ13 NC R3 DQ13 NC
RDQ17 H5 A4 1_WE# RDQ30 B1 R3
RDQ17//RDQ18 RWE_//RCS_ RDQ15 B9 DQ14 NC R7 DQ14 NC
RDQ16 J4 A2 1_CS# RDQ31 B9 R7 RCLK1 R4005 CLK1
RDQ16//RDQ19 RCS_//RRAS_ A2 DQ15 NC L2 B_BA0 DQ15 NC
RDQ20 H4 D9 1_A9 A2 L2 A_BA0
RDQ20//RDQ20 RA9//RCKE E2 NC BA0 L3 B_BA1 NC BA0
RDQ21 K4 E2 L3 A_BA1 0R05 1/16W
ǂǂ
1K 1/16W 1%
RDQ21//RDQ21 RDQS1 B7 NC BA1 L1 B_BA2 NC BA1
R4006
RDQ19 G4 E7 1_A8 C4002 RDQS3 B7 L1 A_BA2 R4007
RDQ19//RDQ22 RA8//RBA0 UDQS BA2 UDQS BA2
RDQ18 K3
RDQ18//RDQ23 RA2//RBA1
E9 1_A2 100N16V RDQS1#
RDQS0
A8
F7 UDQS CK
J8
K8
CLK0
CLK0#
RDQS3# A8
UDQS CK
J8 CLK1 ǂǂ 100R 1/16W 1%
RDQ26 J1 C7 1_A7 RDQS2 F7 K8 CLK1#
RDQ26//RDQ24 RA7//RBA2 RDQS0# E8 LDQS CK L8 B_CS# LDQS CK
RDQ27 D2 RDQS2# E8 L8 A_CS#
RDQ27//RDQ25 RDQM1 B3 LDQS CS L7 B_CAS# LDQS CS
RDQ29 J2 E3 RVREF5 RDQM3 B3 L7 A_CAS# RCLK1# R4008 CLK1#
RDQ29//RDQ26 RVREF RDQM0 F3 UDM CAS K9 B_ODT UDM CAS
RDQ28 C1 DDRV RDQM2 F3 K9 A_ODT
RDQ28//RDQ27 RVREF1 J2 LDM ODT K7 B_RAS# RVREF3 LDM ODT
RDQ31 H3 DDRV J2 K7 A_RAS# 0R05 1/16W
1K 1/16W 1%
RDQ31//RDQ28 VREF RAS DDRV VREF RAS
B_CKE K2 K3 B_WE#
R4009
RDQ25 D1 C16 A_CKE K2 K3 A_WE#
RDQ25//RDQ29 VCC2IO A1 CKE WE A3 CKE WE
RDQ24 J3 B16 C4003 A1 A3
RDQ24//RDQ30 VCC2IO 100N16V A9 VDD VSS A7 VDD VSS
RDQ30 E2 A16 A9 A7
RDQ30//RDQ31 VCC2IO C1 VDDQ VSSQ B2 VDDQ VSSQ
F15 C1 B2
VCC2IO C3 VDDQ VSSQ B8 VDDQ VSSQ
RDQS0 B13 E15 C3 B8
RDQS0//RDQS0 VCC2IO C7 VDDQ VSSQ D2 VDDQ VSSQ
RDQS0# A13 D15 C7 D2
RDQS0_//RDQS0_ VCC2IO C9 VDDQ VSSQ D8 VDDQ VSSQ
H14 C9 D8
VCC2IO E1 VDDQ VSSQ E3 VDDQ VSSQ
RDQS1 A12 H13 E1 E3 Damping for DDR#1 ADDR/CMD
RDQS1//RDQS1 VCC2IO E9 VDD VSS E7 VDD VSS
RDQS1# B12 C2 E9 E7
RDQS1_//RDQS1_ VCC2IO G1 VDDQ VSSQ F2 VDDQ VSSQ
D3 G1 F2
VCC2IO G3 VDDQ VSSQ F8 VDDQ VSSQ
RDQS2 F2 K8 G3 F8 RP4001 0OHM 1/16W
RDQS2//RDQS2 VCC2IO G7 VDDQ VSSQ H2 VDDQ VSSQ
RDQS2# F1 J8 G7 H2 A_A9 1 8 1_A9
RDQS2_//RDQS2_ VCC2IO G9 VDDQ VSSQ H8 VDDQ VSSQ
H8 G9 H8 A_A12 2 7 1_A12
VCC2IO J1 VDDQ VSSQ J3 VDDQ VSSQ
RDQS3 G1 B1 J1 J3 A_A7 3 6 1_A7
RDQS3//RDQS3 VCC2IO DDRV J9 VDDL VSS J7 VDDL VSS
RDQS3# G2 F6 J9 J7 A_A5 4 5 1_A5
RDQS3_//RDQS3_ VCC2IO M9 VDD VSSDL N1 VDD VSSDL
E5 M9 N1
VCC2IO R1 VDD VSS P9 VDD VSS
RDQM0 C12 D4 DDRV R1 P9 RP4003 0OHM 1/16W
RDQM0//RDQM0 VCC2IO VDD VSS VDD VSS
RDQM1 C13 C3 A_BA0 1 8 1_BA0
1K 1/10W 1%
RDQM2 G3 RDQM1//RDQM1 VCC2IO B2 A_BA1 2 7 1_BA1
R4012
RDQM2//RDQM2 VCC2IO C4004 K4T1G164QF-BCF8
RDQM3 E1 A1 100N16V K4T1G164QF-BCF8 A_CKE 3 6 1_CKE
RDQM3//RDQM3 VCC2IO
1K 1/16W 1%
E4 A_WE# 4 5 1_WE#
VCC2IO
R4014
RCLK0 A9 F5 C4006
RCLK0# B9 RCLK0//RCLK0 VCC2IO G6 100N16V
RCLK0_//RCLK0_ VCC2IO RVREF1 RP4005 0OHM 1/16W
F14 A_A3 1 8 1_A3
RCLK1 K1 VCC2IO A_A10 2 7 1_A10
1K 1/10W 1%
RCLK1# K2 RCLK1//RCLK1 L3 RVREF3 A_A1 3 6 1_A1
R4001
RCLK1_//RCLK1_ DVSS L4 A_BA2 4 5 1_BA2
DVSS C4008
1K 1/16W 1%
1_BA2 C6 L5
RBA2//RRESET_ DVSS 100N16V
Analog Power
R4018
L6 RP4007 0OHM 1/16W
AVDD12_MEMPLL H9 DVSS K6 C4010 A_A11 1 8 1_A11
H10 AVDD12_MEMPLL DVSS C9 100N16V A_A4 2 7 1_A4
AVSS12_MEMPLL DVSS F11 AVDD1V2 A_A6 3 6 1_A6
MEMTP D8 DVSS F12 R4016 A_A2 4 5 1_A2
MEMTN C8 MEMTP DVSS E10
MEMTN DVSS J6
DVSS RP4009 0OHM 1/16W
F10 0R05 1/16W A_CAS# 1 8 1_CAS#
DVSS H11 C4012 A_A0 2 7 1_A0
DVSS K7 100N16V A_A13 3 6 1_A13
DVSS H12 A_A8 4 5 1_A8
DVSS
RP4011 0OHM 1/16W
CAPs for DRAM IO Power CAPs for DRAM IO Power ( 1 8
MT5366CHGG A_ODT 2 7 1_ODT
A_RAS# 3 6 1_RAS#
DDRV DDRV A_CS# 4 5 1_CS#
TP4001
TP4002
C4016
+ C4014 C4015 100N16V C4017 + C4019 C4020 C4021 C4022
C4013 100N16V 100N16V 100N16V C4018 100N16V 100N16V 100N16V 100N16V Damping for DDR#2 ADDR/CMD
CAPs for DRAM IO Power NC/470UF 10V 100UF 16V
No AI item RP4002 0OHM 1/16W

DDRV DDRV 1_A5 1 8 B_A5
DDRV
1_A7 2 7 B_A7
1_A12 3 6 B_A12
1_A9 4 5 B_A9
C4023 C4024 RP4004 0OHM 1/16W

10uF 16V 100N16V C4025 C4027 1_BA0 8 1 B_BA0
C4026 C4001 C4028 C4029 C4030
NC/10uF 16V 100N16V 100N16V 10uF 16V NC/10uF 16V 100N16V 100N16V 1_BA1 7 2 B_BA1
1_CKE 6 3 B_CKE
1_WE# 5 4 B_WE#
RP4006 0OHM 1/16W

1_A3 1 8 B_A3
1_A1 2 7 B_A1
1_A10 3 6 B_A10
C4031 C4032 C4033 C4034 C4035 1_BA2 4 5 B_BA2
100N16V 100N16V 100N16V 100N16V 100N16V
RP4008 0OHM 1/16W
1_A11 1 8 B_A11
1_A4 2 7 B_A4
1_A6 3 6 B_A6
1_A2 4 5 B_A2
RP4010 0OHM 1/16W

1_CAS# 1 8 B_CAS#
1_A0 2 7 B_A0
1_A13 3 6 B_A13
1_A8 4 5 B_A8
DDR2_DDRV= 1.8V RP4012 0OHM 1/16W
1 8
1_ODT 2 7 B_ODT
U4004 DDRV 1_RAS# 3 6 B_RAS#
DVDD3V3 G1117T43UF 1_CS# 4 5 B_CS#
R4020 0R051/8W
3 2
VIN VOUT
GND/ADJ
+
C4038 C4036 C4037
100UF 16V 100N 50V R4021 100N 50V GND 2,3,4,5,6,7,8,9,10,16
110R 1/10W 1%
1
NC/10U 10V R4022

C4079 51R 1%
1B 2011-03-19
DRAM Interface
715G4722
19080_542_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-12 MII/GPIO/ServAD
MII/GPIO/ServAD
B12 B12
DVBT Only
MT5366 SPI_CLK
SPI_DATA SPI_CLK 15
SPI_CLE SPI_DATA 15
CI_INT SPI_CLE 15
CI_INT 15
U4001E
PWR5V_3 R4232 E25 R25 DEMOD_TSCLK
H_CONV_A NC/0R05 1/16W G24 GPIO0 DEMOD_TSCLK R24 DEMOD_TSVAL
GVDD_ODD F23 GPIO1 DEMOD_TSVAL R22 DEMOD_TSSYNC
ATSC/DVBT Only
GVDD_EVEN H25 GPIO2 DEMOD_TSSYNC N19 DEMOD_TSDATA0 DEMOD_RST
SOE_A G23 GPIO3 DEMOD_TSDATA0 DEMOD_RST 15
DEMOD_TSCLK
+12V_DET E24 GPIO4 P25 DEMOD_TSCLK 15
DEMOD_TSVAL
RESET H20 GPIO5 CI_TSCLK N20 DEMOD_TSVAL 15
DEMOD_TSSYNC
FLK G21 GPIO6 CI_TSVAL P21 DEMOD_TSSYNC 15
DEMOD_TSDATA0
POL_A H21 GPIO7 CI_TSSYNC P24 DEMOD_TSDATA0 15
GCLK6 E22 GPIO8 CI_TSDATA0
GPIO9 SP_AMP_MUTE SP_AMP_MUTE 6
GCLK5 F22 P22
GCLK4 F21 GPIO10 PVR_TSCLK M21 EDID_WEN
GPIO11 PVR_TSVAL EDID_WEN 10,14
GCLK3 G20 M20 I2SAMP_RESET
GPIO12 PVR_TSSYNC I2SAMP_RESET 7
GCLK2 H24 M19
GCLK1 G25 GPIO13 PVR_TSDATA0
GVST G22 GPIO14 N22 SYS_EEPROM_WP
GPIO15 PVR_TSDATA1 SYS_EEPROM_WP 4
PANEL_VCC_ON/OFF P6 PANEL_VCC_ON/OFF
GPIO16 PANEL_VCC_ON/OFF 3
SP_AMP_MUTE R6 N21 SPI_CLK BL_DIMMING
P5 GPIO17 SPI_CLK M22 SPI_DATA BL_DIMMING 11
TP TP4014 BL_ON/OFF
SYS_EEPROM_WP P4 GPIO18 SPI_DATA M25 SPI_CLE BL_ON/OFF 11
GPIO19 SPI_CLE LED_R
PWR5V_1 R4011 P3 M24 CI_INT LED_R 5
GPIO20 CI_INT LED_G
LED_G 0R05 1/16W P2 R23 DEMOD_RST LED_G 5
USB_OC_COM P1 GPIO21 DEMOD_RST Green_Button_PWM
USB_PWR_EN0 R5 GPIO22 AA3 Green_Button_PWM 5
PWR5V_3 R4010 U5 GPIO23 ETCOL W5
GPIO24 ETTXEN KEY_UP_DN_DCSW
1K 1/16W 5% BL_ON/OFF U6 Y5 KEY_UP_DN_DCSW 5
I2SAMP_RESET V6 GPIO25 ETTXD3 Y3 KEY_MENU_L_R_SOURCE
GPIO26 ETTXD2 USB_PWR_EN0 KEY_MENU_L_R_SOURCE 5
EDID_WEN U7 Y2 USB_PWR_EN0 5
GPIO27 ETTXD1 Y1 USB_OC_COM
ETTXD0 USB_OC_COM 5
LCD_Clock_SDA AD8 W2
R4105 ǂǂ LCD_Clock_SCL AE8 OPCTRL0 ETTXCLK Y4 PWR5V_3 PWR5V_3 14
LED_R AA8 OPCTRL1 ETRXDV W3 PWR5V_1
4.7K1/16W R4233 PWR5V_1 14
AMP_MUTE AE6 OPCTRL2 ETRXD3 W4
2K 1/16W 5% SCART_FS0
OPCTRL4 AB7 OPCTRL3 ETRXD2 V3 SCART_FS0 9
OPCTRL5 Y7 OPCTRL4 ETRXD1 V4 OPCTRL4
OPCTRL5 ETRXD0 OPCTRL5 OPCTRL4 4
W1 OPCTRL5 4
SCART_FS0 SEV_ADIN0 AA9 ETRXCLK AA4 LCD_Clock_SCL LCD_Clock_SCL 5
AA11 ADIN0_SRV ETPHYCLK V5 LCD_Clock_SDA LCD_Clock_SDA 5
TP TP4008 SEV_ADIN1
KEY_UP_DN_DCSW SEV_ADIN2 Y10 ADIN1_SRV ETMDIO W6
POWER_DET SEV_ADIN3 W9 ADIN2_SRV ETMDC
ADIN3_SRV +12V_DET +12V_DET 2
KEY_MENU_L_R_SOURCE SEV_ADIN4 W10 T6 TP4013 TP
LIGHT_SENSOR_IN SEV_ADIN5 Y11 ADIN4_SRV OPWM2 T5 BL_DIMMING
R4106 ADIN5_SRV OPWM1 R7 Green_Button_PWM TP4012 TP
10K 1/16W 5% OPWM0 POL_A POL_A 17
SOE_A SOE_A 17
MT5366CHGG
H_CONV_A H_CONV_A 17
GVST GVST 17
GVDD_ODD GVDD_ODD 17
GVDD_EVEN GVDD_EVEN 17
GCLK6 GCLK6 17
GCLK5 GCLK5 17
GCLK4 GCLK4 17
GCLK3 GCLK3 17
GCLK2 GCLK2 17
GCLK1 GCLK1 17
FLK FLK 17
RESET RESET 17
LIGHT_SENSOR_IN
LIGHT_SENSOR_IN 5
AMP_MUTE
AMP_MUTE 7
GND 2,3,4,5,6,7,8,9,10,12,16
POWER_DET
POWER_DET 2
1B 2011-03-19
MII/GPIO/ServAD
715G4722
19080_543_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-13 HDMI Switch
HDMI Switch
B13 B13
+5V_SW
HDMI SWITCH D5002 BAT54C
1 2
MT5366
Analog Power
3
U4001G
ǂǂ RX_0
AE3 M_RX1_0
AD3 M_RX1_0B
RX_0B AVDD3V3 5V Input Detect
2
FB5003 AE4 M_RX1_1 DVDD3V3 FB5002
RX_1 AD4 M_RX1_1B R5002 PWR5V_1
RX2_C+
RX2_2+
RX2_1+
RX2_0+
DV33_TMDS
DV33_TMDS
RX2_C-
PWR5V_1 13
HDMI2_SDA
RX2_2-
RX2_1-
RX2_0-
HDMI2_SCL
RX_1B AE5 M_RX1_2 AVDD33_HDMI
HPD2
120R/3000mA 1 2 PWR5V_3
RX_2 AD5 M_RX1_2B PWR5V_3 13
RX_2B AE2 M_RX1_C 0R05 1/10W 120R/3000mA
HPD3 RX_C AD2 M_RX1_CB C5009
R5072 RX_CB 100N16V C5003 C5004 C5005 C5006 C5007 C5008 C5019 C5020
1
DV33_TMDS C5002 100N16V 100N16V 100N16V 100N16V 100N16V 100N16V
M_RX1_2 R5054 100R 1/16W 1% M_RX1_2B 100N16V 100N16V
AB6 HDMI_CEC 10uF 10V
NC/4.7K1/16W M_RX1_1 R5055 100R 1/16W 1% M_RX1_1B HDMI_CEC HDMI_SW_CTRL1
AC6 HDMI_SW_HPD HDMI_SW_CTRL1 15
64 C5010 M_RX1_0 R5056 100R 1/16W 1% M_RX1_0B HDMI_HPD HDMI_SW_CTRL2
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
1UF 16V AC5 HDMI_SW_SCL HDMI_SW_CTRL2 15
U5003 M_RX1_C R5057 100R 1/16W 1% M_RX1_CB HDMI_SCL AB5 HDMI_SW_SDA SPDIF_OUT
HDMI_SDA AD6 PWR5V_2 AVDD1V2 SPDIF_OUT 6
HPD3
A24
B24
VCC
A23
B23
GND
A22
B22
VCC
A21
B21
SCL2
SDA2
HPD2
VDD
PWR5V R5003 ARC_EN
0R05 1/16W R5066 AVDD12_HDMI EDID_WEN
ARC_EN 15
AE1 AVDD33_HDMI EDID_WEN 10,13
AVDD33_HDMI
0R05 1/10W GND 2,3,4,5,6,7,8,9,10,12,16
AA6 AVDD12_HDMI
HDMI3_SDA 1 48 RX1_2+ AVDD12_HDMI C5011
HDMI3_SCL 2 SDA3 A14 47 RX1_2- 100N16V
SCL3 B14 AC4
AVSS33_HDMI
RX3_C-
3
4 GND VCC
46
45
DV33_TMDS
RX1_1+
ǂǂ OSCL0
OSDA0
OSCL0 4
B31 A13 OSDA0 4
RX3_C+ 5 44 RX1_1-
DV33_TMDS 6 A31 B13 43
VCC GND MT5366CHGG
RX3_0- 7 42 RX1_0+
RX3_0+ 8 B32 A12 41 RX1_0- DV33_TMDS
A32 B12
ǂǂ RX3_1-
9
10 GND VCC
40
39
DV33_TMDS
RX1_C+
RX3_1+ 11 B33 A11 38 RX1_C-
DV33_TMDS 12 A33 TMDS351PAGR B11 37 HDMI1_SCL R5043
RX3_2- 13 VCC SCL1 36 HDMI1_SDA NC/4.7K1/16W
RX3_2+ 14 B34 SDA1 35 HPD1
15 A34 HPD1 34 R5004
GND EQ DV33_TMDS
16 33 HDMI_SW_CTRL2 NC/2.2K1/16W
Vsadj S2 R5006
R5007
HPD_SINK
SDA_SINK
100R 1/16W 5% R5008

SCL_SINK
R5005 NC/4.7K1/16W 0R05 1/16W

4.02K 1% R5071
GND
GND
VCC
VCC
NC/0R05 1/16W OSDA0

Y4
Y3
Y2
Y1
S1
Z4
Z3
Z2
Z1
OSCL0
R5070
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
NC/0R05 1/16W
HDMI_SW_CTRL1
DV33_TMDS
DV33_TMDS
M_RX1_CB
R5010
M_RX1_2B
M_RX1_1B
M_RX1_0B
R5009 R5011
M_RX1_C
M_RX1_2
M_RX1_1
M_RX1_0
0R05 1/16W 100R 1/16W 5%

NC/4.7K1/16W
R5012 10K 1/16W 5%
R5013 10K 1/16W 5% DV33_TMDS

ǂǂ R5014 4.7K1/16W
SIDE HDMI ESD PROTECTER
HDMI_SW_HPD
ǂǂ
HDMI_SW_SDA
HDMI_SW_SCL
U5004 NC/RClamp0524P.TCT
RX1_2+ 1 10 RX1_2+
RX1_2- 2 IN1 OUT1 9 RX1_2-
IN2 OUT2
RX1_1+ 4 7 RX1_1+
GND
GND
RX1_1- 5 IN3 OUT3 6 RX1_1-
IN4 OUT4
3
HDMI 1 INPUT /Support ARC
CN5002
20 U5005 NC/RClamp0524P.TCT
SHLD0 1 RX2_2+
TMDSD2+ RX1_0+ 1 10 RX1_0+
22
SHLD2 DSHLD0
2 RX1_0- 2 IN1 OUT1 9 RX1_0-
3 RX2_2- IN2 OUT2
TMDSD2-
TMDSD1+
4 RX2_1+ +5V_SW
Audio Reture Channel (ARC) RX1_C+ 4 7 RX1_C+
GND
GND
5 RX1_C- 5 IN3 OUT3 6 RX1_C-
DSHLD1 6 RX2_1- IN4 OUT4
TMDSD1- 7 RX2_0+ D5004 BAS316
TMDSD0+ ǂǂ
3
8 1 2 AVDD3V3
DSHLD2 A K
9 RX2_0-
TMDSD0- 10 RX2_C+
TMDSC+ 11 FB5004 600R/500mA
CSHLD0 12 RX2_C-
TMDSC- U5006 NC/RClamp0524P.TCT
13 CEC_2 HPLUGP2_5V 1 2 R5061 CEC_1 1 10 CEC_1
CEC
NC
14 ARC_HDMI 4.7K1/16W R5063 SCL_1 2 IN1 OUT1 9 SCL_1
15 SCL_2 R5019 100R 1/16W 5% HDMI2_SCL HPLUGP2_5V IN2 OUT2
SCL 0R05 1/16W
C5012
100N16V
16 SDA_2 R5020 100R 1/16W 5% HDMI2_SDA ARC_EN SDA_1 4 7 SDA_1
SDA
GND
GND
17 D5005 BAS316 R5022 R5023 R5024 IN3 OUT3
------><-------
DDC_GND PWR5V_1 5 6 PWR5V_1

23 18 PWR5V_2 1 2 HPLUGP2_5V R5021 IN4 OUT4
SHLD3 VCC5 A K R5062
10K 1/10W
47K
47K
19 NC/0R05 1/16W
HPD
3
21 NC/0R05 1/16W
SHLD1
C5013
470K R5025
R5028
HDMI U5007 AVDD3V3
2
3
BAS316 D5006
1K 1/16W 5% R5026
ZD5002
R5027 33 OHM 1/16W

------><-------
Q5002 2 HPD2 1 8
A K
BC847C 2 E0 VCC 7
1
5
E1 WC
ǂǂ ǂǂ HDMI 2 ESD PROTECTER
100N16V
1K 1/16W 5% 3 6 HDMI2_SCL
1
E2 SCL C5017
3
R5029 4 5 HDMI2_SDA R5030
NC/PDZ24B
1uF 10V
1
VSS SDA Q5003 2 EDID_WEN ARC_HDMI 4 2 SPDIF_OUT

4.7K1/16W
ǂǂ
2
BC847C R5058
M24C02-WDW6TP 180R 1/16W 5% U5015 U5016 NC/RClamp0524P.TCT
4.7K1/16W RX3_2+ 1 10 RX3_2+
74LVC1G125GV
1
R5059 2 IN1 OUT1 9
3
RX3_2- RX3_2-
PWR5V_2 HDMI 1 EDID EEPROM 100K1/16W R5060
82R 1/16W 5%
RX3_1+ 4
IN2 OUT2
7 RX3_1+
GND
GND
RX3_1- 5 IN3 OUT3 6 RX3_1-
IN4 OUT4
3
HDMI 2 INPUT
CN5003 U5014 NC/RClamp0524P.TCT
20 RX3_0+ 1 10 RX3_0+
SHLD0 1 RX1_2+ RX3_0- 2 IN1 OUT1 9 RX3_0-
TMDSD2+ IN2 OUT2
22 2
SHLD2 DSHLD0 3 RX1_2- RX3_C+ 4 7 RX3_C+
GND
GND
TMDSD2- RX3_C- 5 IN3 OUT3 6 RX3_C-
4 RX1_1+ +5V_SW IN4 OUT4
TMDSD1+ 5
DSHLD1 3V3SB
6 RX1_1-
3
TMDSD1-
TMDSD0+
7
8
RX1_0+
ǂǂ 1
D5007 BAS316
2
DSHLD2 9 RX1_0- A K
1
TMDSD0- 10 RX1_C+
TMDSC+ D5003
K A
11 FB5005 600R/500mA U5013 NC/RClamp0524P.TCT
CSHLD0 12 RX1_C- BAS316 CEC_3 1 10 CEC_3
TMDSC- 13 CEC_1 HPLUGP1_5V 1 2 SCL_3 2 IN1 OUT1 9 SCL_3
CEC IN2 OUT2
2
14 HPLUGP1_5V
NC SDA_3 4 7 SDA_3
100N16V C5014
15 SCL_1 R5031 100R 1/16W 5% HDMI1_SCL
GND
GND
SCL PWR5V_3 5 IN3 OUT3 6 PWR5V_3
16 SDA_1 R5032 100R 1/16W 5% HDMI1_SDA R5016 IN4 OUT4
SDA 17 D5008 BAS316
------><-------
DDC_GND 27K 1/10W 5%

23 18 PWR5V_1 1 2 HPLUGP1_5V R5033 R5034 R5035 R5036
3
SHLD3 VCC5 A K CEC_1
19 R5015 0R05 1/10W
HPD
10K 1/10W
47K
47K
21 NC/0R05 1/16W CEC_2 HDMI_CEC

SHLD1
R5017 0R05 1/10W
C5015
470K R5037
ZD5003
HDMI R5040 CEC_3

U5010
2
3
BAS316 D5009
R5038
R5039 33 OHM 1/16W
2
------><-------
R5018 0R05 1/10W

Q5004 2 HPD1 1 8
HDMI 1 ESD PROTECTER
A K
E0 VCC ZD5001
BC847C 2 7
E1 WC NC/BZX384-C5V6
100N16V
1K 1/16W 5% 3 6 HDMI1_SCL
NC/PDZ24B
R5041 4 E2 SCL 5 HDMI1_SDA

1K 1/16W 5%
1
VSS SDA
1
4K7 1/10W 5%
ǂǂ RX2_2+ 1 10 RX2_2+
3
R5042
M24C02-WDW6TP RX2_2- 2 IN1 OUT1 9 RX2_2-
Q5005 2 EDID_WEN IN2 OUT2
BC847C
RX2_1+ 4 7 RX2_1+
HDMI 2 EDID EEPROM
GND
GND
4.7K1/16W 5 IN3 OUT3 6
RX2_1- RX2_1-
1
PWR5V_1 IN4 OUT4
3
HDMI 3 INPUT (SIDE) RX2_0+
RX2_0-
1
2 IN1 OUT1 9
10 RX2_0+
RX2_0-
CN5004 CLK pull down resistance IN2 OUT2
RX2_C+ 4 7 RX2_C+
GND
GND
20 IN3 OUT3
SHLD0 RX2_C- 5 6 RX2_C-
1 RX3_2+ IN4 OUT4
22 TMDSD2+ 2
SHLD2 DSHLD0 3 RX3_2-
3
TMDSD2- 4 RX3_1+ +5V_SW
TMDSD1+ 5
DSHLD1 6 RX3_1-
TMDSD1- R5067
7 RX3_0+ D5010 BAS316
TMDSD0+
DSHLD2
8 ǂǂ 1
A K
2 RX1_C-
3.3K 1/16W
CEC_2
U5011
1
NC/RClamp0524P.TCT
10 CEC_2
9 RX3_0-
TMDSD0- R5068 SCL_2 2 IN1 OUT1 9 SCL_2
10 RX3_C+ IN2 OUT2
TMDSC+ 11 FB5006 600R/500mA 3.3K 1/16W
CSHLD0 RX2_C- SDA_2 4 7 SDA_2
GND
GND
12 RX3_C- IN3 OUT3
TMDSC- HPLUGP3_5V 1 2 PWR5V_2 5 6 PWR5V_2
13 CEC_3 IN4 OUT4
CEC 14 R5069
NC 15 SCL_3 R5045 100R 1/16W 5% HDMI3_SCL HPLUGP3_5V 3.3K 1/16W
3
SCL RX3_C-
C5016
100N16V
16 SDA_3 R5052 100R 1/16W 5% HDMI3_SDA

SDA 17 D5011 BAS316 R5065 R5053 R5047
------><-------
23 DDC_GND 18 PWR5V_3 1 2 HPLUGP3_5V R5051

SHLD3 VCC5 A K
10K 1/10W
47K
47K
19
21 HPD NC/0R05 1/16W
SHLD1
C5018
470K R5050
R5046
HDMI U5012
2
3
ZD5004
BAS316 D5012
1K 1/16W 5% R5044
R5064 33 OHM 1/16W

------><-------
Q5006 2 HPD3 1 8
A K
BC847C 2 E0 VCC 7
E1 WC
100N16V
1K 1/16W 5% 3 6 HDMI3_SCL
1
E2 SCL
3
R5048 4 5 HDMI3_SDA R5049

NC/PDZ24B
1
VSS SDA Q5007 2 EDID_WEN

4.7K1/16W
ǂǂ
2
BC847C
M24C02-WDW6TP
4.7K1/16W
1
PWR5V_3 HDMI 3 EDID EEPROM
1B 2011-03-19
HDMI Switch
715G4722
19080_544_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-14 DVB T/C Demodulator MT5135
DVB T/C Demodulator MT5135

B14 B14
5135_DV33
5135_DV10
5135_DV33
M_CI_OUTDATA7
M_CI_OUTDATA6
M_CI_OUTDATA5
M_CI_INDATA5
M_CI_INDATA4
M_CI_INDATA3
M_CI_INDATA2
M_CI_INDATA1
M_CI_INDATA0
M_CI_INVALID
M_CI_INSYNC
CI_IOWR#
CI_IORD#
DEMODULATOR
CI_IREQ#
CI_CE1#
CI_VS1#
CI_WE#
CI_OE#
CI_A14
CI_A13
CI_A11
CI_A10
CI_D7
CI_D6
CI_A8
CI_A9
MT5135
VGA_UR_EN VGA_UR_EN 10
ARC_EN
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
U1005 ARC_EN 14
HDMI_SW_CTRL1 HDMI_SW_CTRL1 14
MT5135AE
DGND33
DVDD33
DVDD10
DGND10
PAD_A8
PAD_A9
PAD_IOWR_
PAD_IORD_
PAD_OE_
DGND33
DVDD33
PAD_D7
PAD_D6
PAD_A23
PAD_A16
PAD_A22
PAD_READY
PAD_A21
PAD_WE_
PAD_A20
PAD_A14
PAD_A19
PAD_A13
PAD_A18
PAD_A17
PAD_A11
PAD_A10
PAD_VS1_
PAD_CE1_
PAD_D15
PAD_D14
PAD_D13
HDMI_SW_CTRL2 HDMI_SW_CTRL2 14
DEMODULATOR 27 MHz Crystal LVDS_CTRL
LNA_ON/OFF
LVDS_CTRL
LNA_ON/OFF
11
16
TUNER_CLK
TUNER_DATA TUNER_CLK 16
M_CI_INCLK 97 64 CI_D5 TUNER_DATA 16
M_CI_INDATA6 98 PAD_A15 PAD_D5 63 M_CI_OUTDATA4 MT5135AD-
CI_A12 99 PAD_A24 PAD_D12 62 CI_D4 MT5135AD+ MT5135AD- 16
PAD_A12 PAD_D4 5366_XTALI XTALI MT5135AD+ 16
M_CI_INDATA7 100 61 M_CI_OUTDATA3 R1130 RF_AGC_Control
CI_A7 101 PAD_A25 PAD_D11 60 CI_D3 RF_AGC_Control 16
PAD_A7 PAD_D3 0R05 1/16W RF_AGC_H
M_CI_OUTCLK 102 59 CI_CD1# 4K7 1/10W 5% Should be 50ohm RF_AGC_H 8,16
CI_A6 103 PAD_VS2_ PAD_CD1_ 58 PAD_CHIP_CTRL R1113 R1133 RF_AGC_T
PAD_A6 PAD_CHIP_CTRL RF_AGC_T 16
CI_RESET 104 57 51R 1% DEMOD_TSCLK
4
3
CI_A5 105 PAD_PCMCIA_RESET PAD_S2_TS_DATA7 56 X1001 DEMOD_TSVAL DEMOD_TSCLK 13
CI_WAIT# 106 PAD_A5 PAD_S2_TS_DATA6 55 ǂǂ NC/27MHz
ǂǂ DEMOD_TSSYNC DEMOD_TSVAL 13
CI_A4 107 PAD_WAIT_ PAD_S2_TS_DATA5 54 DEMOD_TSDATA0 DEMOD_TSSYNC 13
CI_A3 108 PAD_A4 PAD_S2_TS_DATA4 53 DEMOD_TSDATA0 13
2
1
PAD_A3 PAD_S2_TS_DATA3 SPI_CLK
109 52 R1141 SPI_DATA SPI_CLK 13
110 DGND33 PAD_S2_TS_DATA2 51 SPI_DATA 13
5135_DV33 51R 1% SPI_CLE
CI_REG# 111 DVDD33 PAD_S2_TS_DATA1 50 SPI_CLE 13
5135_DV33 Should be 50ohm CI_INT
112 PAD_REG_ DVDD33 49 CI_INT 13
5366_XTALO XTALO DEMOD_RST
113 DGND10 DGND33 48 DEMOD_RST 13
5135_DV10 R1144 5366_XTALO 5135_REFCLKM
CI_A2 114 DVDD10 PAD_S2_TS_DATA0 47 0R05 1/16W 5135_REFCLKM 8
M_CI_OUTVALID 115 PAD_A2 AD_S2_TS_VAL 46 5366_XTALI 5135_REFCLKP
5135_REFCLKP 8
CI_A1 116 PAD_BVD2 PPAD_S2_TS_SYNC 45 R1125
PAD_A1 PAD_S2_TS_CLK GND 2,3,4,5,6,7,8,9,10,12,16
M_CI_OUTSYNC 117 44 RF_AGC_5135 NC/10K 1% RF_AGC_H
CI_A0 118 PAD_BVD1 PAD_RF_AGC 43 R1126 RF_AGC_Control
M_CI_OUTDATA0 119 PAD_A0 PAD_IF_AGC 42 TUNER_CLK
PAD_DEMOD_TS_DATA0(TS_DATA0)
PAD_D8 PAD_TUNER_CLK 0R05 1/10W C1074
PAD_DEMOD_TS_SYNC(TS_SYNC)
CI_D0 120 41 TUNER_DATA NC/47N 50V
M_CI_OUTDATA1 121 PAD_D0 PAD_TUNER_DATA 40
PAD_PVR_TS_SYNC(TS_DATA7)
5135_DV10
PAD_DEMOD_TS_CLK(TS_CLK)
PAD_DEMOD_TS_VAL(TS_VAL)
PAD_D9 DVDD10
PAD_CI_TS_DATA0(TS_DATA4)
PAD_PVR_TS_DATA0(TS_ERR)
PAD_PVR_TS_CLK(TS_DATA5)
PAD_PVR_TS_VAL(TS_DATA6)
CI_D1 122 39
PAD_CI_TS_SYNC(TS_DATA3)
PAD_D1 AVSS10_5
PAD_CI_TS_CLK(TS_DATA1)
PAD_CI_TS_VAL(TS_DATA2)
M_CI_OUTDATA2 123 38 AVDD33_4
CI_D2 124 PAD_D10 AVDD33_IFPGA 37
PAD_D2 AVDD12_DEMOD 5135_AV12
CI_CD2# 125 36 MT5135AD+
PAD_CD2_ PAD_IFPGA_INP
PAD_PVR_TS_DATA1
CI_INT 126 35 MT5135AD-

PAD_CI_INT PAD_IFPGA_INN
AVDD33_DEMOD_3
AVSS33_DEMOD_3
127 34
PAD_MT5135_RST
128 DGND33 AVSS12_DEMOD_3 33 R1129
5135_DV33 AVDD33_3
PAD_SPI_DATA
DVDD33 PAD_EXT_CLKSEL
AVDD33_XTAL
AVSS33_XTAL
AVDD33_RSSI
PAD_SPI_CLE
PAD_SPI_CLK
4K7 1/10W 5%
AVSS33_RSSI
AVDD12_PLL
PAD_XTALO
R1132 NC/4K7 1/10W 5%
PAD_ADIN0
PAD_XTALI
DGND33
DVDD33
DVDD10
PAD_TN
PAD_TP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
HDMI_SW_CTRL1
HDMI_SW_CTRL2
5135_DV33
VGA_UR_EN
LVDS_CTRL
RSSI
47R 1/16W 5%
ARC_EN
CI_OCP
XTALO
XTALI 5135_DV33
5135_AV12
5135_DV10
TN
TP
CI interface
AVDD33_1
R1146
SPI_CLE
GPIO
DVDD3V3
ǂǂ SPI_DATA AVDD33_3
AVDD33_2
SPI_CLK TP
47 OHM 1/16W 5%
TP1003 R1122
TP TP1001
8
7
6
5
NC/10K 1/16W 5%
DEMOD_RST
R1212
RP1002
DEMOD_RST
NC/4K7 1/16W 5% 5135_DV33 5135_DV33 PCMCIA 5V Slot
LNA_ON/OFF 5135_DV33 CN1007
CI_PWR_EN
1
2
3
4
R1151 1 35
R1264 R1107 10K 1/16W 5% CI_VS1# CI_D3 2 GND GND 36 CI_CD1#
0R05 1/16W D3 CD1#
10K 1/16W 5% R1105 R1106 R1110 10K 1/16W 5% CI_CE2# CI_D4 3 37 CI_OUTDATA3
DEMOD_TSDATA0 D4 D11
10K 1/16W 5% 10K 1/16W 5% CI_D5 4 38 CI_OUTDATA4
DEMOD_TSSYNC D5 D12
ǂǂ DEMOD_TSVAL C1081 CI_CD1# CI_CD2# CI2_VCC CI_D6
CI_D7
5
6 D6 D13
39
40
CI_OUTDATA5
CI_OUTDATA6
DEMOD_TSCLK 10P 50V D7 D14
R1108 10K 1/16W 5% CI_WAIT# CI_CE1# 7 41 CI_OUTDATA7
C1071 C1072 R1109 NC/10K 1/16W 5% CI_OUTCLK CI_A10 8 CE1# D15 42 CI_CE2#
100N 50V 100N 50V R1111 10K 1/16W 5% CI_IREQ# CI_OE# 9 A10 CE2# 43 CI_VS1#
R1152
RF_AGC_T RSSI CI_A11 10 OE# RFSH 44 CI_IORD#
CI_A9 11 A11 RFU 45 CI_IOWR#
10M A9 RFU
CI_A8 12 46 CI_INSYNC
R1153 CI_A13 13 A8 A17 47 CI_INDATA0
7.5M CI_A14 14 A13 A18 48 CI_INDATA1
CI_WE# 15 A14 A19 49 CI_INDATA2
Function 1 (Internal CI) CI Interface CI_IREQ# 16 WE#
RDY/BSY
A20
A21
50 CI_INDATA3
M_CI_INVALID R1114 22R 1/16W 5% CI_INVALID CI2_VCC 17 51 CI2_VCC
M_CI_INSYNC R1115 22R 1/16W 5% CI_INSYNC 18 VCC VCC 52
M_CI_INDATA0 R1116 22R 1/16W 5% CI_INDATA0
CI2_VCC
CI_INVALID 19 VPP1 PCMCIA VPP2 53 CI_INDATA4
CI2_VCC
M_CI_INDATA1 R1117 22R 1/16W 5% CI_INDATA1 CI_INCLK 20 A16 A22 54 CI_INDATA5
M_CI_INDATA2 R1118 22R 1/16W 5% CI_INDATA2 CI_A12 21 A15 A23 55 CI_INDATA6
M_CI_INDATA3 R1119 22R 1/16W 5% CI_INDATA3 CI_A7 22 A12 A24 56 CI_INDATA7
M_CI_INDATA4 R1120 22R 1/16W 5% CI_INDATA4 CI_A6 23 A7 A25 57 CI_OUTCLK
DVDD3V3 FB1016 5135_DV33 M_CI_INDATA5 R1121 22R 1/16W 5% CI_INDATA5 CI_A5 24 A6 RFU 58 CI_RESET
M_CI_INDATA6 R1123 22R 1/16W 5% CI_INDATA6 CI_A4 25 A5 RESET 59 CI_WAIT#
1 2 M_CI_INDATA7 R1124 22R 1/16W 5% CI_INDATA7 CI_A3 26 A4 WAIT# 60
120R/600mA CI_A2 27 A3 RFU 61 CI_REG#
CI_A1 28 A2 REG# 62 CI_OUTVALID
C1082 C1083 C1084 C1085 C1086 C1087 C1088 R1128 A1 BVD2
M_CI_INCLK CI_INCLK CI_A0 29 63 CI_OUTSYNC
10uF 16V 100N16V 100N16V 100N16V 100N16V 100N16V 100N16V CI_D0 30 A0 BVD1 64 CI_OUTDATA0
47R 1/16W 5% D0 D8
NC/10pF 50V CI_D1 31 65 CI_OUTDATA1
Close to MT5366 D1 D9
C1075 CI_D2 32 66 CI_OUTDATA2
FB1017 AVDD33_1 33 D2 D10 67 CI_CD2#
34 WP CD2# 68
69
70
71
72
1 2 AVDD1V2 FB1018 5135_AV12 GND GND
120R/600mA JACK
69
70
71
72
1 2
C1089 C1090 120R/600mA M_CI_OUTVALID R1131 22R 1/16W 5% CI_OUTVALID
NC/10uF 16V 100N16V M_CI_OUTSYNC R1134 22R 1/16W 5% CI_OUTSYNC
C1091 C1092 C1093 M_CI_OUTDATA0 R1135 22R 1/16W 5% CI_OUTDATA0
NC/10uF 16V 100N16V 100N16V M_CI_OUTDATA1 R1136 22R 1/16W 5% CI_OUTDATA1
FB1019 AVDD33_2 M_CI_OUTDATA2 R1137 22R 1/16W 5% CI_OUTDATA2
M_CI_OUTDATA3 R1138 22R 1/16W 5% CI_OUTDATA3
1 2 M_CI_OUTDATA4 R1139 22R 1/16W 5% CI_OUTDATA4
120R/600mA M_CI_OUTDATA5 R1140 22R 1/16W 5% CI_OUTDATA5
C1094 C1095
VCCK
R1156 NC/0R05 1/10W
M_CI_OUTDATA6
M_CI_OUTDATA7
R1142
R1143
22R 1/16W 5%
22R 1/16W 5%
CI_OUTDATA6
CI_OUTDATA7
CI Bus Power Control
NC/10uF 16V 100N16V
DVDD3V3 5135_DV10
FB1001 U1001 FB1022 R1145
FB1020 AVDD33_3 M_CI_OUTCLK CI_OUTCLK
1 2 1 5 1 2 +5V_SW FB1015 220R/2000mA
120R/600mA IN OUT 120R/600mA 47R 1/16W 5% U1006
1 2 2 C1077 10uF 10V
C1107 GND C1076 5 1 1 2 CI2_VCC
120R/600mA R1154 C1101 C1108 C1109 C1102 C1103 C1104 C1105 C1106 IN OUT
C1100 NC/10pF 50V 2
3 4 1K 1/16W 1%10uF 16V 100N 50V 10uF 16V 100N 50V 100N 50V 100N 50V 100N 50V 100N 50V GND
C1078
10uF 10V C1079

10uF 16V SHDN SET CI_PWR_EN 4 3CI_OCP
C1096 C1097 100N 50V EN OC + NC/100uF 16V
NC/10uF 16V 100N16V G9141T11U C1080
G5250M1T1U
R1148 R1149
R1150
100N16V
4.7K1/16W 4.7K1/16W
FB1021 AVDD33_4 10K 1/16W 5%
R1155
1 2 10K 1%
120R/600mA
DVDD3V3
C1098 C1099
10uF 16V 100N16V
1B 2011-03-19
DVB T/C_Demod MT5135

715G4722
19080_545_110319.eps
110319
2012-Feb-03 back to
div. table
10-4-15 DVB T/C Tuner
DVB T/C/ Tuner

B15 B15
MT5135AD-
MT5135AD- 15
TU_FAT_IN2+
Tuner Tuner power +5V_TUNER
TU_FAT_IN2-
TU_FAT_IN2+ 8
TU_FAT_IN2- 8
TUNER_CLK
NC/G552B1TA1U TUNER_DATA TUNER_CLK 15
Panasonic ENV57U03D5F U1002 TUNER_DATA 15
LG TDTK-G931D +5V_ANT 1
VOUT VIN
5
TU1003
R1237
C1195
ENV57U03D5F TU1004 C1194 4 3 MT5135AD+
NC/TDTK-G931D ON/ON FLAG MT5135AD+ 15
RF_AGC_Control
GND
1 +5V_ANT 1 +5V_ANT NC/100N 16V RF_AGC_Control 15
+B active ANT N/C 2 LNA_CONTROL RF_AGC_T
2 +5V_VCC RF_AGC_T 15
NC/100N 16V
N/C(P3) 3
NC/4K7 1/16W 5%
+B 3 RF_AGC_T IF_AGC
RF-AGC Monitor N/C 4 IF_AGC 8
2
5 RF_AGC_T LNA_ON/OFF
NC RF AGC 5 +5V_VCC LNA_ON/OFF 15
6
BT Monitor +B(5V) 6 TT_SDA RF_AGC_H
9 TT_SCL RF_AGC_H 8,15
SCL SDA 7 TT_SCL
10 TT_SDA
SDA 15 SCL 8 GND 2,3,4,5,6,7,8,9,10,12
11
IF Monitor 14 TH4 N/C 9
12 IF_AGCT
IF AGC 13 TH3 N/C 10 DIF1_OUT2
13 DIF1_OUT2
IFD-out1 12 TH2 DIF(+) 11 DIF1_OUT1 FB1035 +5V_TUNER
14 DIF1_OUT1
IFD_out2 TH1 DIF(-)
TH4
TH3
TH2
TH1
+5V_VCC 1 2
120R/600mA
C1182 C1177
18
17
16
15
100N 50V 10uF 16V
I2C +5V_TUNER RF AGC
R1232 R1218 R1260 RF_AGC_Control

4K7 1/10W 5%
1
4K7 1/10W 5% NC/100K 1/16W 5%
R1217
100R 1/10W 5% 10K 1/16W 5% U1009
TT_SCL R1242 TUNER_CLK RF_AGC_T RF_AGC_S 3 2NC/BC857C RF_AGC_H
TT_SDA R1246 TUNER_DATA
100R 1/10W 5%
C1208
C1178 C1179 47N 50V
220P 50V 220P 50V
0R05 1/10W R1213
LNA(LG tuner) FB1038 DIF

NC/120R/3000mA
C1210 C1180 5P6 50V
LNA_CONTROL 1 2 LNA_ON/OFF 56pF 50V 220pF 50V
10N 50V R1257 L1010 C1181 10N 50V
C1203 C1204 DIF1_OUT1 C1207 C1183 TU_FAT_IN2-
NC/1N 50V NC/100N 16V 0.12UH R1256
NC/0.22uH 10%
0R05 1/16W Should be 0.12uH 51R 1%
C1185 C1176 R1259
L1009
L1002
220pF 50V 0.22uH 10% NC/220pF 50V NC/0R05 1/16W
10N 50V R1258 L1011 51R 1% 10N 50V
DIF1_OUT2 C1209 C1202 TU_FAT_IN2+
0.12UH R1261
Should be 0.12uH R1263
C1211 0R05 1/16W C1199 49.9 OHM 1/16W 1% 10N 50V
56pF 50V 220pF 50V C1205 MT5135AD-
C1184 5P6 50V
R1248
0R05 1/16W
IF AGC (Panasion tuner) 150R 1%
R1262
R1216
10N 50V
49.9 OHM 1/16W 1%
C1206 MT5135AD+
R1250 R1252
R1251
IF_AGCT NC/10K 1/16W 5% IF_AGC 0R05 1/16W
NC/10K 1/16W 5%
C1198 C1196
NC/47nF 16V NC/47nF 16V
1B 2011-03-19
DVB T/C/ Tuner

715G4722
19080_546_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-16 T-Con/ Power block/Gamma
TCON/POWER BLOCK/GAMMA
B16 B16
POL_A R7138 47 OHM 1/16W POL
47K 1% R7132
VL
C7159 L7106
15PF50V NC/22UH
CN7102
VCC
61
SWB
CONN PANEL_VCC12
SOE_A R7139 SOE L7105
TP7124 Z-OUT 60 1 GMA1 47 OHM 1/16W
59 2 GMA3 TP7104 TCOMP 22uH
2
CK1 58 3 GMA4 C7163
33 OHM 1/16W
1
15PF50V
100K 1% R7137
C7144
C7145
C7146
C7147
C7148
C7149
C7150
C7151
C7152
R7133
NC
NC
10uF 16V
10uF 16V
10uF 16V
10uF 16V
10uF 16V
10uF 16V
100N 50V
CK2 57 4 GMA5 TP7106 D7102
CK3 56 5 GMA7 47K
CK4 55 6 GMA9 TP7108
CK5 54 7 GMA10 TH7101 FB340M H_VDD
1
CK6
VGH_R
53
52
8
9
GMA12
GMA14
TP7101 t
TCON_SCL
2
VGH_F 51 10 GMA15 TP7105
GMA16
GMA15
VGH_ODD 50 11 GMA16 C7102
VGH_EVEN 49 12 GMA18 TP7107
COMP
VGL_I 48 13 R7181 VCC 100N16V
VST 47 14 OPT_N 1uF 25V
21
20
19
18
17
16
46 15 H_CONV C7157
0R05 1/16W
22KOHM 1/10W
TP7123 VCOMLFB 45 16 GVST_I
Thermal Pad
SCL
GMA8
GMA7
HVDD
NC
VCOM 44 17 POL PANEL_VCC12
C7158
43 18 SOE
NC/0.1UF50V
R7134
42 19 C7104
VDD 41 20 LMLV0_P 100N16V TCON_SDA 1 U7110 15 GMA14
40 21 LMLV0_N 2 SDA BUF08630 GMA6 14 GMA12
SS
H_VDD 39 22 LMLV1_P R7198 NC/4.7K 3 A0 GMA5 13 GMA7 VDD
38 23 LMLV1_N 4 DVDD GMA4 12 GMA5
VCON_GND GMA3
VCOM_AVDD
100N 50V C7153
C7170 10uF 16V 37 24 LMLV2_P VCOM_PG 5 11 GMA4
VCOM_OUT GMA2
C7155
C7156
C7162
NC
1N 50V
1uF 25V
VCC 36 25 LMLV2_N
VCOM_FB
35 26 LMLVCLK_P
20R 5% 1/16W
20R 5% 1/16W
NC/10OHM1/16W
41
40
39
38
37
36
35
34
33
32
31
BKSEL
GMA1
AVDD
34 27 LMLVCLK_N R7167 R7168
LMLV5_N 33 28 LMLV3_P VCC R7169
Thermal Pad
PVINB1
PVINB1
SWB1
SWB1
OUT1
SWB2
PGND2
NC
NC
NC
LMLV5_P 32 29 LMLV3_N
LMLV4_N 31 30 LMLV4_P
6
7
8
9
10
VL 1 30 R7140
C7173 10uF 25V TCOMP 2 EN OUT2 29 TCON_SDA 10K 1/16W 5%
62
VL TCOMP SDA
C7106
10uF 25V
3 28 TCON_SCL R7171 R7172
C7174 100N 25V 1uF 25V 4 VL SCL 27 C7105
GMA3
H_VDD C7164 5 AGND U7108 A0 26 R7197 0R05 1/16W RESET 100N 50V
0R05 1/16W
0R05 1/16W
L7107 6 AVIN RST 25
C7165 7 PVINB3 TPS65168RSB NC 24 CTRLN
2.7K 1/10W
10uH 1.3A 8 NC CTRLN 23
NC/0.1UF50V 9 SWB3 NC 22 VGL_FB
VCOMRFB
VCOMLFB
OUT3 FBN
R7142
C7167
C7168
10uF 16V
10uF 16V
10 21 VGH
H_CONV_A R7148 H_CONV C7169 PGND3 VGH
47 OHM 1/16W NC
PGND3
PGND3
CTRLP
COMP
SWO
SWI
SW
SW
C7116
NC
SS
CN7103 NC/15PF50V L7109 NC/10uH
61
11
12
13
14
15
16
17
18
19
20
CONN
TP7111 GMA1 60 1 Z-OUT VCC R7151 100R 1/16W 5%
GMA3 59 2
TP7112 GMA4 58 3 CK1 SS CTRLP CN7101
GMA5 57 4 CK2 COMP
TP7113 GMA7 56 5 CK3 FLK R7154 FLK_IN L7111 TCON_SDA 1
GMA9 55 6 CK4 NC/4.7K PANEL_VCC PANEL_VCC12 NC/22UH VDD TCON_SCL 2
TP7114 GMA10 54 7 CK5 3
L7108
9.1K 1%
GMA12 53 8 CK6 C7200 4
TP7115 GMA14 52 9 VGH_R TP7118 NC/10N 50V L7110 D7103
C7203
C7176
C7177
R7144
NC
10uF 25V
10uF 25V
GMA15 51 10 VGH_F TP7117 1 2 1 2 +
TP7116 GMA16 50 11 VGH_ODD C7202 CONN
C7182
GMA18 49 12 VGH_EVEN VGL R7163 VGL_I 120R/3000mA 22uH FB340M NC/47UF 25V
C7178
C7204
C7205
C7181
NC
NC
100N 50V
10uF 25V
10uF 25V
48 13 VGL_I TP7119
C7183
C7184
C7185
10uF 16V
10uF 16V
OPT_N 47 14 VST 0R05 1/16W
NC
H_CONV 46 15
GVST_I 45 16 VCOMRFB TP7121 DISCHG R7164 R7149 C7186
POL 44 17 VCOM TP7122
SOE 43 18 NC/0R05OHM1/16W VGL D7104 D7109 D7105
SW
42 19 2R2 +-5% 1/8W 1NF 50V 1N4148W 1N4148W 1N4148W
RMLV5_N 41 20 VDD R7150 R7201 Q7107
RMLV5_P 40 21 MMBT3904
RMLV4_N 39 22 H_VDD 0R05 1/16W 10R CTRLN
RMLV4_P 38 23 VCOM R7170 VCOM_PG R7202 C7190
RMLV3_N 37 24 C7175 10uF 16V VCC C7187 C7188 R7152 R7153 C7189 100N 25V
RMLV3_P 36 25 VCC 0R05 1/16W 10uF 16V 10uF 16V 3.6K 1/10W 5K1 1/16W 5% 1uF 25V NC/0R05 1/16W
RMLVCLK_N 35 26 C7196
RMLVCLK_P 34 27 VCC 100N 25V R7157
RMLV2_N 33 28 RMLV0_P R7165 100K1/16W
RMLV2_P 32 29 RMLV0_N VGL R7193 NC/0R05 1/16W 100R 1/16W 5% C7195
RMLV1_N 31 30 RMLV1_P R7158 1uF 25V R7159
4K7 1/16W 1% 10R
C7171 C7172 VGH R7194 0R05 OHM VGH_F VCC
100N 50V 10N 50V VGL_FB
62
C7179 10uF 25V R7166 R7160 SOE

R7182 SOE 7
3K 1/16W 1%
0R05 1/16W
NC/100N 16V
C7103
C7180 100N 25V VCC VGL R7195 0R05 OHM R7161 RMLV0_P
RMLV0_P 11
100R 1/16W 5%
R7162 0R05 1/16W RMLV0_N
VDD 3K9 +/-5% 1/16W RMLV1_P RMLV0_N 11
VGH R7196 NC/0R05 1/16W VGH_R R7205 RMLV1_N RMLV1_P 11
NC/0R05 1/16W RMLV2_P RMLV1_N 11
C7191 C7192 RMLV2_N RMLV2_P 11
SWB
100N 50V 10N 50V FLK_IN RMLVCLK_P RMLV2_N 11
R7203 3K 1/16W R7204 3K 1/16W C7101 RMLVCLK_N RMLVCLK_P 11
RMLVCLK_N 11
C7112
100N 50V
100N 25V RMLV3_P

C7113 R7179 3K 1/16W R7180 3K 1/16W RMLV3_N RMLV3_P 11
1uF RMLV4_P RMLV3_N 11
DISCHG RMLV4_N RMLV4_P 11
TP7103TP RMLV5_P RMLV4_N 11
GVST R7184 0R05 1/16W GVST_I TP7102TP RMLV5_N RMLV5_P 11
29
28
27
26
25
24
23
22
RMLV5_N 11
GVDD_ODD R7185 0R05 1/16W GVDD_ODD_I LMLV0_P
Thermal Pad
VSENSE
FLK1
FLK2
FLK3
RE
YDCHG
GND
LMLV0_N LMLV0_P 11
GVDD_EVEN R7186 0R05 1/16W GVDD_EVEN_I GVDD_ODD_I 1 21 VGH_ODD TP7125 LMLV1_P LMLV0_N 11
GVDD_EVEN_I 2 A9 Y9 20 VGH_EVEN TP7126 LMLV1_N LMLV1_P 11
GCLK1 R7187 0R05 1/16W GCLK1_I GVST_I 3 A8 Y8 19 VST TP7127 LMLV2_P LMLV1_N 11
GCLK1_I 4 A7 U7109 Y7 18 CK1 TP7128 LMLV2_N LMLV2_P 11
GCLK2 R7188 0R05 1/16W GCLK2_I GCLK2_I 5 A6 Y6 17 CK2 TP7129 LMLVCLK_P LMLV2_N 11
GCLK3_I 6 A5 MAX17119ETI+ Y5 16 CK3 TP7130 LMLVCLK_N LMLVCLK_P 11
GCLK3 R7189 0R05 1/16W GCLK3_I GCLK4_I 7 A4 Y4 15 CK4 TP7131 LMLV3_P LMLVCLK_N 11
A3 Y3 LMLV3_P 11
GON1
GON2
GOFF
CK5 TP7132 LMLV3_N
GCLK4 R7190 0R05 1/16W GCLK4_I CK6 TP7133 LMLV4_P LMLV3_N 11
A2
A1
Y1
Y2
R7145 R7146 LMLV4_N LMLV4_P 11
GCLK5 R7191 0R05 1/16W GCLK5_I TP7110TP LMLV5_P LMLV4_N 11
VCC
8
9
10
11
12
13
14
4.7K1/16W NC/4.7K1/16W GCLK5_I TP7109TP LMLV5_N LMLV5_P 11

OPT_N GCLK6 R7192 0R05 1/16W GCLK6_I GCLK6_I H_CONV_A LMLV5_N 11
POL_A H_CONV_A 13
SOE_A POL_A 13
GVST SOE_A 13
GVDD_ODD GVST 13
GVDD_EVEN GVDD_ODD 13
GVDD_EVEN 13
R7183
R7174
R7173 GCLK6
R7178 R7175 R7176 GCLK5 GCLK6 13
0R05 1/16W
0R05 1/16W
NC/0R05OHM1/16W
GCLK5 13
C7110
VGH C7108 GCLK4

0R05 1/16W
0R05 1/16W
NC/20R 1/16W
Q7106 2SB1124T D7106 D7107 D7110 GCLK3 GCLK4 13

0R05 1/16W
VDD GCLK3 13
R7177
R7206 VDD 1uF GCLK2

C7107 GCLK1 GCLK2 13
GCLK1 13
1uF 25V
10R 1uF FLK

1N4148W 1N4148W 1N4148W D7108 RESET FLK 13
R7156 R7199 240R 1/16W TCON_SCL RESET 13
4.7uF 50V 4.7uF 50V
TCON_SCL 4,11
C7197
R7155 C7193 C7194 R7207 TCON_SDA

TCON_SDA 4,11
100K1/16W
9.1K 1% NC/4.7uF 50V 1uF C7198 VGL R7200 NC/0R05 OHM1N4148W

0.47UF 50V NC/0R05 1/16W VGH GND 2,3,4,5,6,7,8,9,10,12,16
C7199
VGH
C7100
CTRLP
1uF 25V
SW
1B 2011-03-19
TCON/POWER
715G4722
BLOCK/GAMMA
19080_547_110319.eps
110319
2012-Feb-03 back to
div. table
10-4-17 SSB layout top
CN4004
R7133
R4231
Q4160 Q4161
H4
C7152 R7161
L7106 C7195 C7189 TP14
C7144
C7145
C4162
L7105 C7151
R7160
TP2
D7109
R7159
C7150 R7202 R7201
Q4158 Q4159
C1080
C7188
C7187
CN7101
C7147
C7146 C7149
R7152
C7196
C4036
D7105
D7102
D7104
C7157
C7162 C7148
FB1015
C7190
L7109
TH7101 R7137 C7158 R7150
C7194
U4004 C4038
TP19
R7132
L7107
C7199 C7197
U7108
C7164 Q7106 C1077
R7198
Q7107 R1150
R7181 R7153
C7193
U1006
C1078
C7101
R4026 C4039
C7165
R7140 R7182
R7156
C1079
C4079
R7197 R7162
R7155 R4021
R4022
D7106
FB1001
R7157 R7158
C7198
R4024
R1149
R1148
R4100
C4037 U4006 R4103
D7107
C7100
C7153 R7134
C7183 C7167
C7184 C7168
C7156
C1100
R7142
C7169
R4020
C1107
C7155
D7103 C7202 C4013
R7207
C1101
R7206 D7110 Q4003
R4102 R4013 U1001
R4045
R4042
R4043
R4044
C7182
R1155
TP53
R1156
C7185
R7149 C7186
C1106
C1105
C1104
C1103
C1102
C7178
C7176 R1154
L7108 C7181 C7177
C1108
FB1022
C1083
C1084
C7203
C7205 C1109
C1087
L7111
C4042
L7110 R1212
C4041
R7144
C4040
C1089
CN1007
U4008
R1264
C1093
C7204
C1085
C1088
FB1017
C1090
R1122
FB1019
R7146 R7145 TP1001
C1091
C7116 R7148
C1092
C1094
CN7102
R7184
C1099
C1098
FB1018
C7163 R7139
FB1021
RP4016
D3
R1107
TP11 RP4017
RP4011
RP4012
RP4010
R1110 H7
C4018
U4002
RP4018
RP4009
RP4008
FB4005
FB4004
RP4007 RP4001
R4003
RP4005
R7171
R4097
R7045
C4078 R7048
RP4003
U4003
R4007
R4004
R4002
TP4001
TP4002
TP3
R7002
U7005
CN4010
TP8
D1 R4028
U7006
C7003 C7036
R7003
CD2 C6005 U7002
R4057
R4058
R4055
R4005
CN7103
R4008
C4054
R7172
R4056
C7022
C7006
U4001
R7032
R7004
R6058 C6098
C7002 C7037
C6003
R4011
C7023
C4053 R4039
R6061 C6100
C6027
R6007 C6030
R7031
R7013
R6080
FB7006
R6039 R6040
R4023
C7029
CN4008
RP4013
R4101 R6019
R7020 R7021 C7028
R4098
R4099
R4233
C6025
R6032
R6031
RP4014
R4010 C4075 R6079

C6024
TP23
TP22
RP4015
R4094
C7027
TP4
D4005
D4001
FB7005
R4081
R4082
R4080
R4079
C1183
C1202
R1259 C4044 C4045

R1256
R1261
H3 X4002 H2
R7014
C7026 C4068
C7120
C1013
C1001
C1022
C1029
C1050
C1052
C1054
C1057
C1014
C1019
C1058
C1062
C1064
C1059
C1061
R7038
R4078
C7040
TH4001
C7038
R1063 C1044
R5066
R1084
R1088
R1083
R1089
R1091
R1001
R1019
R1029
R1040
R1071
R1085
R1023
R1076
R1079
U4009
C7014
C7017
R7015
R7017
CN4003
R4077
C7119
R7229
R7230
Q7005
C7016
C4070
R7018
R1066
Q7004
C7012
R7037
R7016
C7013
R7036
C4064 R4067 C7025
C1047 C4069
FB4003
R7035
C7039
R1062
C1045 R1065
R4076
C4063 C4065
R4061 R4062
R4065 R7019
ZD1014
C1046
TP29
TP28
C1048
U7004
L1003
C4062 R4066
ZD1012
CN4007
C7015
R4064
C1056
L7001
C7011
R1081
R1087
R1082
C1063 C1060
R1068 R1064
ZD1020
FB1007
C7045
C7010
R1090 R1086
D7001
D4004
R4060
R4068 C1065
ZD1024
TP54
ZD1023
ZD1021
R4074
R4059
R1167
CN1005
R1092
FB1009
FB1008
FB1010
FB7004 Q1013 TP27
R4063 R4075
TP55
C1068
R1093
R1096
TP30
C1055
C1066 D4003
FB4002
FB1013
C4061 R7041
ZD1157
R1078
R1080
C7004 FB7007 C7033
ZD1013
Q7007
Q7006
C4066 FB1011 ZD1156

C7044
C7046 TP41
C6013
FB1006
ZD1019
C6014
TP42 TP40
C7035
R7028
C7031 TP43
C7043
R7047 C7005
FB7002
R7044
R7039 R7043 R1073

C4067
TP31
R7030 R1069
C7042
U7007 R7042
R7011
R7046 R7234 R1075
CN6002 CN1001
C7041
CN1006
ZD1016
FB6002
C7007
R1074
C1051
Q7003
C1110
C1073
R7026
R7009 R7027
C7032
TP34
CN7001
Q1008
R7008 C7034 R1060 R1070 C6035
R7012
R7023
Q7008
FB1005
R1061
ZD1017
C7047 D7002
TP32
R7022
C7008
TP33
R1058
R1077
Q1006
R1053
R1056
C6023 C6029 C6036 C6034

ZD1027
R6051
R6050
R6048
R6047
R6049
FB7009
R1054
L7002
C1053
ZD1018
C1043
R1059
C7030
FB7008
C7048
R4070
R4069
R4232
CN6003
C6039
C1193
U6004
TP26
C6042
C6028 TP20
R1072
TP50 C6026 TP21
TP51
TP24
C1049
CN4005 R6072
C6021
R6028
Q6002
ZD1025
C1192
R6029
FB6003
R7006
R7010
TP25
C6033
D6002
R6033
R6030
FB6004
ZD1015
FB6006 R1210
C1040
R1055
Q1153
CN5004
R1234
L6004
C6067
R1165
R1230
R1209 Q1012
C6072
C1197
R6067
C6073
U5016
R1211
L6005
CN6005
C6080
R6063
U5014
C6079 C6068
C6064
C6066
R5069
R6090
R4049
R4048
U7001
C6076 C6077
U5013
FB6005
R5005
R6089 R5055 R5054 R5045
TP9
R5052
R6066
R6065
C6041
C6070 Q6004 R5057 R5056 R5044
R5018
R6059 C6085 ZD5004
R6094 R6091
C6001
C1198 R1251
D5003
ZD5001
C6069
C5018
R5050
R6078
D5011
C7019
CN6004
C7018
C6074
R5016 D5012
L6003
U5003
R5015
R5017
R6083
C6043
R5048
C6045
Q5006
R5051
R5012
R5013
C7020 D5007 FB5005 R5064
FB7001
C1179 C1178
C6044 R1232
R5034
R5035
R5036
R5042
C7021 R5014 R5010
U2
R1246
U6006 R6056 R1242
R5043 R5007
C5014 R5040
R6081
Q5005
D5010
C6060
C6059
C6078
C6061
U5010
C6055
FB5006
R1218 R5047
C6046
R6055 C7057 TP5
R5053 U5012
C1177
C1182
C6052
R6054
C6050
FB1035
C5016
R5049
C6047
Q5007
C6062
C6053
C6081
R6084
R6082
R5046
C6048
C6054
C5010
R5065
C6071
FB5003
C6057 D5008
R6053
D5002
C6075 C6065 R7233 TU1003
D5004
R6069
R7034
FB5004
R6068 R5024
R6062
C1195
D5009
R5041
R6052
C6058
R5067
R5032
U5007
R5031
R1237
R6070
R6071
C1204
C1203
R5020
R5019
R5023
ZD5003
ZD5002
D5005
Q6003
D5006
FB1038 R5068
R5030 C5012
U1002
Q5003
R5028
R5038
R5026
L6002
R5039
R5033
C5013
R5029
R5027
C5015 U5006 U5005 U5004 U5011 U5009 U5008
R5022
TU1004
C1194 R5037 R5025
R1217 C1208
TP6
R5021
Q5004
D2 Q5002
TP16
H5 TP10
CN5003 CN5002
CN1003 CN1002
1B 2011-03-19
SSB
715G4722
layout top
19080_548_110319.eps
110405
2012-Feb-03 back to
div. table
10-4-18 SSB layout bottom
TP7
TP13
TP17
R1109
R1145
R1137
R1136
R1135
R1134
R1131
R1108
R1128 C1075
C1072
FB1016 R4110
R1106
R1124
R1123
C1076
R7169 C7104 R4109
R5070
R7168
C1082 R1121
R7167
C1086
R1114
R5009
C7106
R1120
C7105
R5011
U7110
TP7116
TP1003
R5071
R1111
C7102
R1119
R5006 R1118
RP1002
R1117 TP7115
U1005
TP7112 TP7105
C1081 R1146 R1116
U4005
TP7104 TP7106
R1115
R1152 R1153 TP7113
R1151 TP18
C1095 TP7101
X1001
R1143
R1141 R1133
R1142 R4025
R4027
Q4150
R1140
R4230
R1248 C1205
R1252 C1206
C1074 R1125
R1113
C1071
C1097 R1138 R1139
C4161
R1129
Q4156
R1105
C4025 C7171
R7170
R1132
C1096
R1126
R1213
R4012
R1130
R1144
C7172
C4015
R1262
FB1020
RP4002
TP12 TP7122
R1216
R1263
Q4157 TP7109
C7174
R4001 C7173
C4008
RP4006
U1009 TP7110
C7170
R1260 C4017 C4001
Q4151
TP7123
RP4004
C4014
C4004
C4027
C4026
C4028
R7195
R7196
C4019
R7180
C7200
C4021
C4016
R7151 TP7118
R7164 R7163
R7193 R7194
R4018
R4014
R7204
R7179
C4010 C4006 TP7117
R7203 TP7119
R7165
R7166
R7154
C7103
TP7124
R7205
R1008
R1009
C1008
C4031 R7185
C4072
TP7125
C4020 C4022 R7186
TP4003
C4023 R7187 TP7126
C4076
C4030 TP7127
U7109
R4096
R4091
C4002 C4029 R7188 TP7128
TP7129
R4006 R7189 R7190 TP7130
C4003
R4009
C4073 TP7131
R7191 R7192 TP7132
C4077
C4033
C4024
TP7133
C7108
C4012 R7176
C4032
C4046
C4035 C7110 R7173
R7199
R7200
C4059 C4056 R7175
C7179
C4034 R7178 R7174 TP7121
C7112
D7108
R6064
R1250 C4048 R4016
C6101
C7180
C6099
C4058
C7175
C4060 R7183
C1196 TP6001 TP6005
C4055
C4057
C7113
C7107
R6060
TP4014
C4047
R7177
C6004
TP7103
TP6008
TP6006
R6003
TP6009 TP6002 TP6004
TP4013
C7192
R4105
C6002
TP4025 TP7102
C7191
C6007
C6008
TP6003 TP4024
R6002 R4108
R4083
R4107
R5002
C5009
R6004
C6006
R1006
C1006
C1007
R1007
C4049 TP4012
R4052 C4052 C7159
C5011
C1005
R7138
R7050
R4035
R4036
R4034
R4033
R4032
R4031
R4040
R4041
C1004
TP7107
C1002
R4054
C4050
C4051
R1005 TP1018
R1002
R1010
R1067
R4053
TP7114
C4043
R1004
TP7108
R7049
CN4002
C1003
R1003 TP7111
R4051
R5003
R4104
R4050
TP4008
R4038
R4046 R4030 U4007
R4106
R4047
R4208
Q4153
R4015
Q4154
Q4152
R4206
R4207
C6018 R6024
R6017
R6011
R6005 R6016 R6014
C6016
R6013
C6017
R6021
R6022
U6003 C6019
R6023
C6020 R6027 R6026
TP7007
TP52
R6006
R6015
C6010
TP7006
R6009
C6009
C6012 TP49
R6012 TP48
TP47
TP44
TP45
TP46
ZD1026
ZD1022
ZD1028
TP7003
ZD1030 ZD1029
D1009
ZD6001
R1104
TP7005
R1101 D6006 R4093
R4095
R1103
R1207
C4071 C4074
C1176
R1094
R1095
R1097
R1099 R4092 TP7004
C1181 C1199
R4090
L1009 TP7002
D1008
Q4001
R1206
R1205
R1208
R1098
R4089
C1180
C1184
L1010
L1011
FB1012
C1067
TP7001
R4084 R4088
L1002
R4087
C1069
FB1014
C1185 R4086 Q4002
C1207 R1257
C1209 R1258
R1102
R4085
Q1009
C1210 C1211
U1004
Q6005
R1100 C1070
R6034
D6007
FB5002
C5002
R6076
R6057
R6077
Q6001
C5008
C5019
C6063
C5020 C5003
R6075
D6004
D6005
C5007
C6102 R6086
C5004
R5008
C5005 TP6007
R6073
C5006 R5004
R6085
C6056
R6074
R5072
D6001
D6003
TP6012 TP6010
R5063
R5061
TP6013
R5060
TP6011
R5058
C5017
R5062 U5015 R5059
C1037
R1034 R1051
C1028 C1027 R1028 C1191
C1190
R1022 C1018
FB1004 R1038 R1037 ZD1006 FB1003 R1050 C1036 D1006 D1007
FB1002 R1018 R1021
ZD1007 D1002
ZD1001
TP15 D1005 TP35
D1001
TP38
TP37
TP39
TP36
TP1
1B 2011-03-19
SSB
715G4722
layout bottom
19080_549_110319.eps
110319
2012-Feb-03 back to
div. table
10.5 E 272217190349/51 IR/LED/Key Board

10-5-1 Leading Edge Module
Leading Edge Module

E E
U1 PIC16F1827
CPS6 R1
copper IN0 19 7 PWM1 1K KEYBOARD
M09 R16 M10 RA0/AN0/CPS0/C12IN0- RB0/SRI/T1G/CCP1(1)/P1A(1)/INT/FLT0
IN6 20 8 SDA C2 C3
1 RA1/AN1/CPS1/C12IN1- RB1/AN11/CP S11/RX(1)/DT(1)/SDA1/SDI1
100Ω IN1 1 9 IN4 M13 M14
+3.3V VDD RA2/AN2/VREF-/DACOUT/CPS2/C12IN2-/C12IN+ RB2/AN10/CP S10/MDMIN/TX(1)/CK(1)/RX(1)/DT(1)/SDO(1) 105 105 ZD2
L1 IN2 2 10 IN5
RA3/AN3/CPS3/C12IN3-/C1IN+/Vref+/C1OUT/CCP3(2)/SRQ RB3/AN9/CPS9/MDOUT/CCP1(1)/P1A(1)/Vcap R27 5.6V
100uH IN3 3 11 PWM2-SCL M15
RA4/AN4/CPS4/C2OUT/T0CKI/CCP4(2)/SRNQ RB4/AN8/CPS8/SCL1/SCK1/MDCIN2
M11 R2 M12 MCLR 4 12 BUZZER 1K
C1 RA5/MCLR/VPP/SS1 RB5/AN7/CPS7/P1B/TX(1)/CK(1)/SS1(1)
103 17 13 ICSPCLK VDD
RA6/OSC2/CLKOUT/CLKR/P1D(1)/SDO1(1) RB6/AN5/CPS5/T1OSI/T1CKI/PGC/P1C(1)
18 14 ICSPDAT
10uF RA7/OSC1/CLKIN/P1C(1) RB7/AN6/CPS6/T1OSO/PGD/P1D(1)/MDCIN1
C4 5 16 VDD
VSS VDD
6 15
104 VSS VDD CAP
C5
104 touchsence
J1
IN5 R3
CPS5
1
VDD 3.9K
L2 M32 R11 1k M35 M36
TV CONNECTOR M31 100uH
test IN4 R4
J2
C7 BZ1 CPS4
J7 VDD T1 1
C8 105 C6
LIGHT M01 M37 3.9K M38
1 105
M02 10uF/6.3V
2 T2 J3
IR M03 IN3 R5
3 CPS3
LED2 1
4
5
M04
M05
+3.3V
BUZZER BUZZER IR M39 3.9K M40
LED1 U2 T3
6 M06
BUZZER R9 Q1 M03 R17 10Ω M29 J4
KEYBOARD M07 IR 3 ICSPCLK IN2 R6
7 M33 1K OUT CPS2
M08 M34 BC847 1
8 +5V M30 T4 3.9K
2 M41 M42
+3.3V VDD
2.0- 8pin ICSPDAT
R18 100R J5
4 IN1 R7
ZD4 C10 GND T5 CPS1
1
ESD 5.6V 10uF/6.3V 3.9K
1 MCLR M43 M44
GND
J6
+3.3V TSOP75236 IN0 R8
CPS0
1
+5V 3.9K
M45 FM46
R15 +5V +5V
47Ω/15Ω
White LED R10 LIGHT Sensor
4.7kΩ / 100Ω Red LED TEMT6200
8
D1 M21 G1 M23 U3B
5 U3A
WHITE M18 R22
D2 RED 7 3
R26 LIGHT
6 470Ω 1
M22 2 100R M01
C
E
M24 LM358 M26 M27

1
M19 M25
Q3 Q4 LM358 M28
ZD1
4
C
E
Q2
LED2 R14 3.3V
C
B B
LED1 R12 M16
2 BC847 B B R19 R20
C12 R23 R24
B 10kΩ
15kΩ
18kΩ
R21
C
10kΩ ZD3
E
R13 104
47kΩ
22kΩ
BC857 5.6V BC847 R25

10kΩ M20 R28 130kΩ
C
150kΩ
3
10kΩ
C11 104 C13 104
9 2010-10-19
Leading Edge Module

2722 171 9034
19150_003_110511.eps
110511
2012-Feb-03 back to
div. table
10.6 E 272217190453/4 IR/LED/Key Board

Leading Edge Module

E E
CPS6 U1 PIC16F1827
copper
M09 R16 100Ω M10
R1
1 IN0 19 7 PWM1 1K KEYBOARD
RA0/AN0/CPS0/C12IN0- RB0/SRI/T1G/CCP1(1)/P1A(1)/INT/FLT0
IN6 20 8 SDA C2 C3
+3.3V VDD RA1/AN1/CPS1/C12IN1- RB1/AN11/CP S11/RX(1)/DT(1)/SDA1/SDI1
L1 IN1 1 9 IN4 M13 M14
RA2/AN2/VREF-/DACOUT/CPS2/C12IN2-/C12IN+ RB2/AN10/CP S10/MDMIN/TX(1)/CK(1)/RX(1)/DT(1)/SDO(1) 105 105 ZD2
IN2 2 10 IN5 option
100uH RA3/AN3/CPS3/C12IN3-/C1IN+/Vref+/C1OUT/CCP3(2)/SRQ RB3/AN9/CPS9/MDOUT/CCP1(1)/P1A(1)/Vcap 5.6V
M11 R2 IN3 3 11 PWM2-SCL M15
C1 RA4/AN4/CPS4/C2OUT/T0CKI/CCP4(2)/SRNQ RB4/AN8/CPS8/SCL1/SCK1/MDCIN2
103 M12 MCLR 4 12 BUZZER
17 13 ICSPCLK
4.7uF 10uF +5V RA6/OSC2/CLKOUT/CLKR/P1D(1)/SDO1(1) RB6/AN5/CPS5/T1OSI/T1CKI/PGC/P1C(1)
18 14 ICSPDAT
RA7/OSC1/CLKIN/P1C(1) RB7/AN6/CPS6/T1OSO/PGD/P1D(1)/MDCIN1
C4 M17
104 R27 5 16 VDD
VSS VDD
6 15
18K VSS VDD CAP
C5
R29
104 touchsence
J1
33K IN5 R3
CPS5
1
M35 3.9K M36
VDD
L2 M32 R11 1k option test J2
M47 IN4 R4
M31 100uH T1 CPS4
C7 VDD 1
BZ1 3.9K
C8 105 C6 M37 M38
TV CONNECTOR 10uF/6.3V
105
T2 IN3 R5
J3
J7
M48
IR CPS3
1
LIGHT U2 3.9K
1
2
M01
M02 BUZZER BUZZER
IR M03 R17 10Ω M29
3
OUT
T3
M39 M40
J4
IR ICSPCLK IN2 R6
3 M03
BUZZER R9 Q1 M30 CPS2
LED2 M04 2 1
4 M33 1K +3.3V VDD T4 3.9K
M05 M34 BC847 M41 M42
5 +3.3V R18 100Ω
LED1 M06 4 ICSPDAT
6 ZD4 C10 GND J5
KEYBOARD M07 IN1 R7
7 ESD 5.6V 10uF/6.3V T5 CPS1
M08 1 1
8 +5V option GND 3.9K
MCLR M43 M44
2.0- 8pin TSOP75236
J6
+3.3V IN0 R8
CPS0
1
+5V 3.9K
M45 FM46
R15 +5V +5V
47Ω/4.7kΩ(MTK)
8
option WHITE M18
D1 M21 G1 M23
5 U3B
R22 U3A
D2 RED 7 3
R26 LIGHT
6 470Ω 1
M22 2 100R M01
C
E
M24 LM358 M26 M27

1
M19 Q4 M25
Q3 LM358 M28
BC847 ZD1
option
4
C
E
Q2
LED2 R14 3.3V
C
B B
LED1 R12 M16
2 BC847 B B R19 R20
C12 R23 R24
B 10kΩ
15kΩ
18kΩ
R21
C
10kΩ ZD3 R28

100kΩ
E
R13 104
22kΩ
BC857 5.6V 10kΩ R25

10kΩ 100kΩ
M20 option
C
100kΩ
3
C11 104 C13 104
4 2011-04-21
Leading Edge Module 3 2011-04-21
2722 171 9045
19052_002_110816.eps
111129
2012-Feb-03 back to
div. table
10.7 E 272217190475 IR/LED/Key Board

Leading Edge Module

E E
CPS6 U1 PIC16F1827
copper
M09 R16 100Ω M10
R1
1 IN0 19 7 PWM1 1K KEYBOARD
RA0/AN0/CPS0/C12IN0- RB0/SRI/T1G/CCP1(1)/P1A(1)/INT/FLT0
IN6 20 8 SDA C2 C3
+3.3V VDD RA1/AN1/CPS1/C12IN1- RB1/AN11/CP S11/RX(1)/DT(1)/SDA1/SDI1
L1 IN1 1 9 IN4 M13 M14
RA2/AN2/VREF-/DACOUT/CPS2/C12IN2-/C12IN+ RB2/AN10/CP S10/MDMIN/TX(1)/CK(1)/RX(1)/DT(1)/SDO(1) 105 105 ZD2
IN2 2 10 IN5 option
100uH RA3/AN3/CPS3/C12IN3-/C1IN+/Vref+/C1OUT/CCP3(2)/SRQ RB3/AN9/CPS9/MDOUT/CCP1(1)/P1A(1)/Vcap 5.6V
M11 R2 IN3 3 11 PWM2-SCL M15
C1 RA4/AN4/CPS4/C2OUT/T0CKI/CCP4(2)/SRNQ RB4/AN8/CPS8/SCL1/SCK1/MDCIN2
103 M12 MCLR 4 12 BUZZER
17 13 ICSPCLK
4.7uF 10uF +5V RA6/OSC2/CLKOUT/CLKR/P1D(1)/SDO1(1) RB6/AN5/CPS5/T1OSI/T1CKI/PGC/P1C(1)
18 14 ICSPDAT
RA7/OSC1/CLKIN/P1C(1) RB7/AN6/CPS6/T1OSO/PGD/P1D(1)/MDCIN1
C4 M17
104 R27 5 16 VDD
VSS VDD
6 15
18K VSS VDD CAP
C5
R29
104 touchsence
J1
33K IN5 R3
CPS5
1
M35 3.9K M36
VDD
L2 M32 R11 1k option test J2
M47 IN4 R4
M31 100uH T1 CPS4
C7 VDD 1
BZ1 3.9K
C8 105 C6 M37 M38
TV CONNECTOR 10uF/6.3V
105
T2 IN3 R5
J3
J7
M48
IR CPS3
1
LIGHT U2 3.9K
1
2
M01
M02 BUZZER BUZZER
IR M03 R17 10Ω M29
3
OUT
T3
M39 M40
J4
IR ICSPCLK IN2 R6
3 M03
BUZZER R9 Q1 M30 CPS2
LED2 M04 2 1
4 M33 1K +3.3V VDD T4 3.9K
M05 M34 BC847 M41 M42
5 +3.3V R18 100Ω
LED1 M06 4 ICSPDAT
6 ZD4 C10 GND J5
KEYBOARD M07 IN1 R7
7 ESD 5.6V 10uF/6.3V T5 CPS1
M08 1 1
8 +5V option GND 3.9K
MCLR M43 M44
2.0- 8pin TSOP75236
J6
+3.3V IN0 R8
CPS0
1
+5V 3.9K
M45 FM46
R15 +5V +5V
47Ω/4.7kΩ(MTK)
8
option WHITE M18
D1 M21 G1 M23
5 U3B
R22 U3A
D2 RED 7 3
R26 LIGHT
6 470Ω 1
M22 2 100R M01
C
E
M24 LM358 M26 M27

1
M19 Q4 M25
Q3 LM358 M28
BC847 ZD1
4
C
E
Q2
LED2 R14 3.3V
C
B B
LED1 R12 M16
2 BC847 B B R19 R20
C12 R23 R24
B 10kΩ
15kΩ
18kΩ
R21
C
10kΩ ZD3 R28

E
R13 104
47kΩ
22kΩ
BC857 5.6V 10kΩ R25

10kΩ 150kΩ
M20 option option
C
150kΩ
3
C11 104 C13 104
5 2011-05-30
Leading Edge Module

2722 171 9047
19052_001_110816.eps
110816
2012-Feb-03 back to
div. table
Styling Sheets L11M2.1E LA 11. EN 73
11. Styling Sheets

11.1 Berlinale 40" - 46"
Berlinale 40" - 46"
1150
1005
5216
0012
0039
5213
0039
5216
0260
POS. NO. DESCRIPTION. REMARKS

0004 Front Cabinet
0012 Back Cover
0040 Hard Switch bracket
0040 0093 Bottom Vesa Bracket
0260 Stand
1004 Display panel
1005 Power Supply Unit
1085 Remote Control Not Displayed
1004 1108 Leading Edge (IR + Keyb. Assy)
1150 Board SSB
5213 Loudspeaker box
5216 Tweeter
8191 Mainscord 1.8m Not Displayed
1108 8G51 Cable LVDS FFC Not Displayed
0004
FOR ELECTRICAL PARTS/ASSEMBLIES SEE WIRING DIAGRAM CHAPTER 9
19150_002_110511.eps
110914
2012-Feb-03 back to
div. table

Philips Шасси L11M2.1E LA

Uploaded by

Copyright:

Available Formats

Philips Шасси L11M2.1E LA

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Philips Шасси L11M2.1E LA

Uploaded by

Copyright:

Available Formats

Colour Television Chassis

Manual xxxx xxx xxxx.1 Manual xxxx xxx xxxx.4

2. Technical Specs, Diversity, and Connections

2.1 Technical Specifications

Table 2-1 Described Model Numbers and Diversity:

Model Number Styling Published in Power Supply Unit

Note: The given Model Numbers are subject to change.

Figure 2-1 Connection overview (Berlinale Styling)

19 - HPD Hot Plug Detect j 9 - +5VDC +5 V j

1 - D2+ Data channel j

4 - D1+ Data channel j

7 - HDMI1: Digital Video, Digital Audio - In

2.4 Chassis Overview

3. Precautions, Notes, and Abbreviation List

DNR Digital Noise Reduction: noise The SDI signal is self-synchronizing,

PDP Plasma Display Panel SWAN Spatial temporal Weighted Averaging

4.1 Cable Dressing

Figure 4-1 Cable dressing (40" Berlinale styling)

3 × tape (100 mm)

Figure 4-2 Cable dressing (46" Berlinale styling)

4.2 Service Positions

4.3 Assembly/Panel Removal (Berlinale styling)

4.3.1 Rear Cover

Refer to Figure 4-3 to Figure 4-5 for details.

Figure 4-3 Rear cover removal -1-

4.3.2 Small Signal Board (SSB)

Caution: it is mandatory to remount all different screws at their

4.3.3 Power Supply Unit (PSU)

Caution: it is mandatory to remount all different screws at their

4.3.4 Stand removal

1. Remove the four fixation screws.

4.3.5 Stand bracket removal

Refer to Figure 4-6 for details.

Stand Bracket 4.3.8 LED Panel

Refer to Figure 4-10 for details.

Figure 4-9 LCD Panel removal -1-

Refer to Figure 4-8 for details.

Figure 4-10 LCD Panel removal -2-

4.4 Set Re-assembly

5. Service Modes, Error Codes, and Fault Finding

ComPair Mode is used for communication between a computer 39mm

Next items are applicable to all Service Modes or are general.

Table 5-1 SAM mode overview

Main Menu Sub-menu 1 Sub-menu 2 Description

How to Navigate How to Exit SAM

How to Store SAM Settings

How to Exit CSM

Figure 5-5 CSM Menu [2/3]

Figure 5-6 CSM Menu [3/3]

5.3 Stepwise Start-up

Standby Soft Mode

Switch Off (Mains

Figure 5-7 Stepwise Start-up

5.4 Service Tools

Introduction Additional cables for VCOM Alignment

Optional Power Link/ Mode

Before starting the software upgrade procedure, it is advised to

5.5.4 Download the latest software

How to Order 5.5.5 Update the TV software

5.5.7 How to Copy NVM Data to/from USB