3AG11T
3AG11T
3AG11T
Features ar
1 Ye ty
• Stainless steel wetted materials (except as noted) an
• NEMA 4, 12 & 13 enclosure Warr
• Stable diffused silicon sensor
• LED status indicators for over/under pressure
• Separate adjustment chamber
• Set point adjustments with large calibrated dial in psi
and bar provides setting accuracy to 3% adjustable
range ADJUSTABLE RANGE - PSI 16 ADJUSTABLE RANGE - BAR 16
SWITCH PART ADJUSTABLE DIFFEREN
• Differential/deadand adjustment from 2% to 95% of
NUMBER DECREASING INCREASING DECREASING INCREASING
adjustable range with 20 turn potentiometers 4 MIN MAX MIN MAX MIN MAX MIN MAX PSI
• Separate wiring chamber 3AG11T-01C-01SW 0.45 14.7 0.75 15 0.03 1.01 0.05 1.03 0.3 TO 14.25
• 20 to 30 millisecond time delay built-in to dampen
3AG11T-03C-01SW 1.5 49 2.5 50 0.10 3.38 0.17 3.45 1 TO 47.5
pressure surges and prevent false switching
3AG11T-04C-01SW 3 98 5 100 0.21 6.76 0.34 6.9 2 TO 95
3AG11T-07C-01SW 9 294 15 300 0.62 20.27 1.03 20.69 6 TO 285
How to select 3AG11T-08C-01SW 15 490 25 500 1.03 33.79 1.72 34.48 10 TO 475 0
• Determine pressure range 3AG11T-10C-01SW 30 980 50 1000 2.07 67.57 3.45 68.96 20 TO 950 1
• Check proof pressure 3AG11T-12C-01SW 60 1960 100 2000 4.13 135.14 6.9 137.9 40 TO 1900 2
• Specify catalog number 3AG11T-13C-01SW 90 2940 150 3000 6.21 202.72 10.34 206.85 60 TO 2850 4.
• Modify catalog number with options 3AG11T-14C-01SW 120 3920 200 4000 8.27 270.29 13.79 275.8 80 TO 3800 5.
3AG11T-15C-01SW 150 4900 250 5000 10.34 337.86 17.24 344.76 100 TO 4750
3AG11T-17C-01SW 250 7350 400 7500 17.24 506.79 27.58 517.13 150 TO 7125 10.
3AG11T-18C-01SW 300 9800 500 10000 20.69 675.72 34.48 689.51 200 TO 9500 13.
Specifications
Electrical Option 1/2” NPT conduit to internal
terminal block
Pressure Connection 7/16-20 UNF female pressure port Wiring Configurations
per SAE and MS16142 SPDT SPST N.C.
Operating
N.C. N.O. A.C. N.C. N.O. A.C.
Temperature 0ºF to +160ºF
Power Supply 115 VAC±10%, 50-60 Hz. Metal
oxide varistor on input power for
surge protection. Power up delay N.O.
of 5 seconds maximum (triacs LOAD
remain off during this period) N.C.
LOAD
Switching 3 amp AC SPST normally open and N L1
normally closed solid state triacs
N L1
Leakage current 1.7 mA maximum
Voltage drop 2 volts maximum
SPST N.O.
Switching Voltage 30 VAC to 130 VAC
N.C. N.O. A.C.
2 volt amp maximum; 2 watts
Power Consumption maximum
±0.5% of adjustable range con-
stant ambient temperature
±3% of adjustable range from
Repeatability initial setting over compensated
N L1
temperature range
1
Solid State Pressure Switch Pressure 3AG11T AC Series
2.78
AC
Ø.281 MOUNTING
3.44 HOLES, 2 PLACES
Ø.281 MOUNTING 2.72
HOLES, 2 PLACES
2.72 2.72
.62
.62 BARKSDALE
L0S ANGELES, CA. 90058
S0L D STATE
PRESSURE SW TCH SETTING LEDS
SW TCH NUMBER ADJUSTMENT
LEDS 0VER 14 SET
FACTORY ADJUSTABLE RANGE
11
14 PROOF PRESSURE
NCR.
10
2
30
100
60
PSI
0.14 TO 6.55
GROUND 8.47
0.41TO 19.65 150 SCREW
0.69 TO 32.75 300
1.38 TO 65.50 600
2.76 TO 131.0 1000 5.12
.62
1/2 NPT
7/16-20UNF PRESSURE .62
CONDUIT
PORT PER SAE HANDBOOK 1/2 NPT
CONNECTION 1.56 1.16 1.23
AND MS16142
CONDUIT
CONNECTION
3AG11T Series
Adjustable Range
Operating Adjustable Proof Catalog
Range Min. Max. Deadband Pressure Number
Gauge (PSIG)
0.5-15 0.45 15 0.3 to 14.25 30 3AG11T-01C-01SW
1.5-50 0.15 50 1 to 47.5 100 3AG11T-03C-01SW
3 -100 3 100 2 to 95 200 3AG11T-04C-01SW
9 -300 9 300 6 to 285 600 3AG11T-07C-01SW
15 -500 15 500 10 to 475 1000 3AG11T-08C-01SW
30 -1000 30 1000 20 to 950 2000 3AG11T-10C-01SW
60 -2000 60 2000 40 to 1900 4000 3AG11T-12C-01SW*
90 -3000 90 3000 60 to 2850 6000 3AG11T-13C-01SW*
120 -4000 120 4000 80 to 3800 8000 3AG11T-14C-01SW*
150 -5000 150 5000 100 to 4750 10000 3AG11T-15C-01SW*
250 -7500 250 7500 150 to 7125 13000 3AG11T-17C-01SW*
300 -10000 270 10000 200 to 9500 13000 3AG11T-18C-01SW*
Approximate shipping weight: 2.1 lbs.
* Viton O-ring in contact with media standard. Other materials available. Consult factory.
Barksdale, Inc • 3211 Fruitland Avenue • Los Angeles, CA 90058 • (323) 589-6181 • Fax (323) 589-3463 2