Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 151 views

    Regulator3 4 DS

    Uploaded by

    arga
    tyy

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Regulator3 4 DS

    Uploaded by

    arga
    151 views4 pages
    tyy

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    tyy

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    151 views4 pages

    Regulator3 4 DS

    Uploaded by

    arga
    tyy

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Directional Control Valve Products

    3/4” Full Flow Regulator


    Heavy Duty Shear-Seal® Regulator
    * Original Shear-Seal®
    Models 20415, 20115
    Technology

    * Self Adjusting

    * High Flow Capacity

    * Tolerates Contaminated

    Media

    * Manual Set or Fail-Safe

    Motor Control

    * Self Venting

    Barksdale’s pressure regulators are sensitive pressure-control devices


    used to maintain a pre-determined pressure in a hydraulic circuit. The

    regulated output pressure can be controlled either by the force of a

    spring, or a motor (hydraulic or pneumatic). Design features ensure

    excellent accuracy, repeatability and high flow coefficients.

    Exceeding Your Expectations Through Our People, Products and Performance


    Directional Control Valve Products

    3/4” Full Flow Regulator


    With Barksdale, Pressure is Under Control
    Barksdale’s pressure regulators are built on
    Shear-Seal® Technology, where the media passes
    through an internal gallery rather than across a
    sealing surface. This rugged, corrosion-resistant
    design and construction allows for long-term use in
    a wide range of applications such as
    chemical/petrochemical plants, refineries, gas pro-
    cessing, steel mills and for blow out preventer
    accumulator systems.

    Self Adjusting
    Regulated output pressure is adjusted by varying
    the spring force with either an air or hydraulic
    motor or a manual operator. If the output or regu-
    lated pressure exceeds the desired setting, the
    excess pressure is automatically relieved through
    a vent port. If the output pressure drops below the Manual Set
    preset value, fluid from the inlet port automatically The manually set regulator is spring loaded to control
    flows until the pressure increases to the preset regulated hydraulic pressure. A handle on the adjust-
    value. ing screw rotates to set the load on the spring.
    Stainless Steel Seal Elements Because of their simplicity, spring loaded pressure
    Tolerate Contaminated Media regulators are ideal for use in emergency systems or
    The main operating member of the regulator is a where infrequent adjustment is required. A gauge port
    hardened stainless steel, pressure activated seal- is standard on 1" port size regulators.
    ing element. The use of Barksdale’s metal-to-metal
    Motor Operated
    Shear-Seal® sealing surfaces allow the valve to
    The motor operated regulator is used where regulat-
    withstand far more severe service than regulators
    ed pressure must be controlled from a remote loca-
    containing conventional elastomer seals. This
    tion such as a master control panel. This option is
    design excels in handling regulated media contain-
    available using either a hydraulic or pneumatic motor.
    ing metallic particles and other contaminants due
    The failsafe feature of the regulator allows the regula-
    to a flow path through an internal gallery rather
    tor to be manually adjusted if hydraulic or pneumatic
    than across the sealing face. This design avoids
    pressure is lost. Additionally, the regulator will hold
    leakage and damage to critical elements.
    the last setting if the motor pressure is lost.
    Additionally, springs beneath the seal elements
    make it possible for the valve to automatically self-
    compensate for wear and mend minor surface
    defects.

    2
    Directional Control Valve Products

    3/4” Full Flow Regulator


    Main Regulator
    Supply/Inlet Pressure 5,000 psi (345 bar)
    Regulated Pressure Manual 300-1500 psi (21-103 bar)
    1500-3000 psi (103 - 207 bar) “-1”
    Regulated Pressure
    Failsafe Motor Models 500-2400 psi (34 - 165 bar)
    Fluid Temperature Range -40° to +250°F (-40° to +121°C)
    Standard O’Ring Material Buna N
    Proof Pressure 7,500 psi (517 bar)
    Burst Pressure 12,500 psi (862 bar)

    Product Number Inlet Outlet Vent Gauge Port Cv Supply Cv Vent


    20415 (Single Inlet) 1" NPT 1" NPT ½" NPT 3/8” NPT 9.8 0.6
    20115 (Dual Inlet) 1" NPT 1" NPT ½" NPT 3/8” NPT 13.6 0.9
    (2-ports) (2-ports)

    Materials of Construction
    Body Stainless Steel
    Flanges Phosphate Coated Alloy Steel
    (Stainless Steel optional)
    Socket Head Screws Zinc Plated Alloy Steel
    (Stainless Steel optional)
    Wetted Materials Stainless Steel

    Fail Safe Pilot Motor Information


    Pneumatic Pilot Motor ("F" prefix)
    Pilot Motor Working Pressure 80-100 psi (5.5-6.9 bar)
    Porting ¼" NPT
    Operating Temperature Range 40°-220°F (4°-104°C)

    Hydraulic Pilot Motor (“G” prefix)


    Working Pressure 100-1650 psi (6.9 - 114 bar)
    Porting SAE for 3/8” Tube (Size -6)
    Temperature Rating -40° to +150°F (-40° to +66°C)

    Approximate Shipping Weights


    Single or Dual Inlet
    Manual Set 47 lbs. (21.3 kg)
    Air or Hydraulic Failsafe 70 lbs. (31.8kg)

    3
    Directional Control Valve Products

    3/4” Full Flow Regulator


    Heavy Duty Shear-Seal® Regulator - Configurator
    Models 20415, 20115
    Adjustment F Pneumatic Failsafe Motor
    Method G Hydraulic Failsafe Motor
    Manual (blank)
    Series 20415S3WQ2 Single Inlet
    20115S3WQ2 Dual Inlet
    Regulated -1 1500-3000 psi (103-207 bar) - manual only
    Pressure Range (blank) 300-1500 psi (21-103 bar) or 500-2400 psi (34-165 bar) for motor actuated models

    G 20415S3WQ2
    Example: G20415S3WQ2

    Need Something Special


    Our heavy duty Shear-Seal® Regulators can be configured to meet
    your requirements. Common modifications include special O-Rings or
    wetted materials, special pressure ranges and non-standard port
    sizes other than those listed. Call us. We are only a phone call away.

    3211 Fruitland Avenue • Los Angeles, CA 90058 •  800-835-1060 • Fax: 323-589-3463 • www.barksdale.com
    See Barksdale’s Standard Conditions of Sale • Specifications are subject to modification at any time • Bulletin #B0025-B• 10/04 • ©2004 • Printed in the U.S.A.

    You might also like