Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

KEIM Spezial Fixativ

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Technical Data Sheet

KEIM Spezial-Fixativ

1. Product description 4. Application instructions

KEIM Spezial-Fixativ is a diluent and primer comprising Substrate preparation


pure liquid potassium silicate with small quantities of The substrate must be sound, dry, clean and free of dust
organic additives for KEIM silicate emulsion paints and grease.
according to VOB/C DIN 18 363 sect. 2.4.1.
Application
For pretreating highly absorbent substrates:
2. Field of application Apply KEIM Spezial-Fixativ undiluted with a brush.

KEIM Spezial-Fixativ can be used as a diluent for the For diluting KEIM Granital, KEIM Quarzil,
following KEIM coating systems: KEIM Ecosil-ME and KEIM Mycal-Top:
KEIM Granital system See relevant Technical Data Sheet.
KEIM Quarzil system
KEIM Ecosil-ME system Application conditions
KEIM Mycal-Top Ambient and substrate temperature > + 5°C.
The absorbency of highly absorbent mineral substrates
can be controlled or reduced with KEIM Spezial- Drying times
Fixativ.c. A drying time of at least 12 hours must be allowed
between pretreatment and priming and between coats.

3. Product properties Consumption


For pretreatment on a smooth substrate:
KEIM Spezial-Fixativ bonds permanently (silicification) Approx. 0.1–0.2 l/m2 KEIM Spezial-Fixativ
with the substrate, is extremely water vapour permeable,
highly resistant to weathering and incombustible. The stated consumption value is for guidance and
depends on the absorbency and texture of the substrate.
• Bonds permanently with the substrate by silicification Exact consumption values can only be determined by
• Weather resistant applying trial areas on the structure to be coated.
• Non-film-forming
• Extremely water vapour permeable Cleaning of tools
• Non-flammable Clean with water immediately after use.
• UV-resistant
• Hinders fungal and mould growth
• Resistant to industrial fumes 5. Packaging
• Solvent-resistant
• Environmentally friendly, good environmental impact 5 l and 20 l jerricans.
assessment
• Excellent low environmental impact building
material 6. Storage

Material characteristics Shelf life is approx. 12 months in a sealed container


• Specific weight approx.: 1.03 g/cm3 under cool, but frost-free conditions. Protect from heat
• pH value: approx. 11 and direct sunlight.
• Organic content: < 5%

Colour shade
Milky
Stand 03/15
TD KEIM Spezial-Fixativ

7. Disposal

EC Waste Code No. 06 02 99


Any residues must be emptied out of containers before
recycling.

8. Safety instructions

GISBAU Product Code/GISCODE: M-SK 02

KEIM Spezial-Fixativ is alkaline. Provide appropriate


protection for surfaces which are not to be treated (e.g.
glass, ceramics, wood etc.). Any splashes on
surrounding surfaces or traffic areas must be rinsed off
immediately with water.
Protect the eyes and skin from splashes. Keep out of
reach of children.

Please refer to EC Safety Data Sheet.

The stated values and properties are the result of extensive development work
and practical experience. Our recommendations for application, whether given
verbally or in writing, are intended to provide assistance in the selection of our
products and do not establish a contractual relationship. In particular, they do not
release those purchasing and applying our products from the duty of
establishing for themselves, with due care, the suitability of our products for the
intended application. Standard building industry practices must be complied
with. We retain the right to make modifications to improve the products or their
application. This edition supersedes all earlier editions.

Stand 03/15

KEIMFARBEN
Keimstraße 16 Frederik-Ipsen-Straße 6 www.keimfarben.de
D-86420 Diedorf 15926 Luckau info@keimfarben.de
Tel. +49 (821) 4802-0 Tel. +49 (35456) 676-0
GmbH Fax +49 (821) 4802-210 Fax +49 (35456) 676-38

You might also like