Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Industrial Application of Cold Plasma

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 10

Abstract:Cold plasma is an emerging non-thermal technology for the improvement

of food safety. This technique becomes a subject of high interest for a wide variety of
technologies including the food industry. Cold plasma is a novel non thermal food
processing technology that uses energetic, reactive gases to inactivate contaminating
microbes on meats, poultry, fruits, and vegetables. The atmospheric cold plasma is
proposed for decontamination of fruits and vegetables, especially, without changes in
sensory attributes. Growing demand for fresh produce poses the challenge to the food
industry of supplying safe food with minimal processing. It is crucial that foods are
supplied without any microbial contamination as many products are eaten raw. Cold
atmospheric plasma has potential in the food manufacturing sector to inactivate
microorganisms, thereby improving food safety without loss of physicochemical or
sensory properties.

INTRODUCTION

The name plasma was first used by Irving Langmuir in 1926 who described this state
of matter as near the electrodes, where there are sheaths containing very few
electrons, the ionized gas contains ions and electrons in about equal numbers so that
the resultant space charge is very small. We shall use the name plasma to describe this
region containing balanced charges of ions and electrons.. Later, the definition was
broadened to define a state of matter in which a significant number of atom and/or
molecules are electrically charged or ionized. Plasma is considered as a distinct state
of matter due to its properties; it does not have a regular shape or volume and it can
form filaments and/or beams under magnetic fields. Depending on the method of
generation used, the plasma can display a broad spectrum of states ranging from
extreme no equilibrium to almost complete thermal equilibrium. Plasma can be found
in the form of natural phenomena such stars and lightening or man-made as in the
production of fluorescent and neon lights, plasma television etc. The research areas of
plasma technology is fast growing and has been particularly studied for its use on
biomedical materials and devices surface modification of textiles , removal of
chemicals on surfaces of devices manufactured from heat sensitive materials water
sterilization and more recently wound healing and food decontamination . Non
Thermal Atmospheric Plasma can be divided into two groups depending on the
method of generation as non-thermal plasma (NTP), and thermal plasma (TP). NTP
consists of gas molecules with moderate temperatures and electrons with higher
temperatures whereas in TP the electrons and gas temperatures are several thousands
of Kelvin and these species are found in equilibrium. NTP is also known as cold and
non-equilibrium plasma with regards to the energy level, temperature and ionic
density. An important aspect in the use of NTP for decontamination is the ability to be
effective, without affecting the material being decontaminated. This is possible due to
the weakly ionized nature of the cold plasma discharge. The antimicrobial efficacy of
NTP has been related to the specific type of plasma technology used including; the
power level used to generate the plasma, the gas mixture in the plasma emitter, the
intensity and length of exposure, design of the system, flow rate and pressure. Cold
atmospheric plasma has potential in the food manufacturing sector to inactivate
microorganisms, thereby improving food safety. Growing demand for fresh produce
poses the challenge to the food industry of supplying safe food with minimal
processing. It is crucial that foods are supplied without any microbial contamination
as many products are eaten raw. As a result, there is much interest in novel ways of
preserving food and destroying micro-organisms without affecting its quality. One
such emerging technology that has shown promise is the use of cold atmospheric
plasma (CAP) treatment. An overview of the cold plasma technology is presented
with its potential applications in food processing sector. Plasma is considered as the
fourth state of matter. The concept of the fourth state of matter results from the idea
that phase transitions occur by progressively providing energy to the matter, such as
the one from the solid state to liquid up to the gas state. A further phase transition may
be thought as the one from the gas state to plasma state, even if these states is reached
gradually by providing more and more energy to the system. Plasma can be seen as a
particular ionized gas, which retains some unique features which distinguish it from
an (ideal) gas

Plasma Science and Technology

Plasma is ionized gas that consists of a large number of different species such as
electrons, positive and negative ions, free radicals, and gas atoms, molecules in the
ground or excited state and quanta of electromagnetic radiation (photons). It is
considered to be the forth state of matter in the world. It can be generated in the large
range of temperature and pressure by means of coupling energy to gaseous medium.
This energy can be mechanical, thermal, nuclear, radian or carried by an electric
current. These energies dissociate the gaseous molecules into collection of ions,
electrons, charge – neutral gas molecules and other species Depending on the type of
energy supply and amount of energy transferred to the plasma, density and
temperature of the electrons are changed. These lead Plasma to be distinguished into
two groups, high temperature plasma and low temperature plasma High temperature
plasma implies that electron, ions and neutral species are in a thermal equilibrium
state. Low temperature plasma is subdivided to thermal plasma, also called local
thermodynamic equilibrium plasma (LTE) and non thermal plasma (NTP), also called
non-local thermodynamic equilibrium plasma (non-LTE). An equilibrium or near
equality between electrons, ions and neutrals is the main characterization of thermal
plasmas (TP). Frequently employed thermal plasma generating devices are those
produced by plasma torches, and microwave devices. In generation of cold plasma
most of the coupled electrical energy is channeled to electron component instead of
heating entire gas stream so the temperature of heavy particle remains near the room
temperature, these characteristics make it suitable to be used in processes which high
temperature is not desirable.
Figure: Plasma as fourth state of matter

Cold plasma is a novel non thermal food processing technology that uses energetic,
reactive gases to
inactivate contaminating microbes on meats, poultry, fruits, and vegetables. [4] This
flexible sanitizing method uses electricity and a carrier gas, such as air, oxygen,
nitrogen, or helium; antimicrobial chemical agents are not required. The primary
modes of action are due to UV light and reactive chemical products of the cold
plasma ionization process. A wide array of cold plasma systems that operate at
atmospheric pressures or in low pressure treatment chambers are under development.

Methods to Generate Plasma

There are various ways to supply the necessary energy for plasma generation to a
neutral gas as shown in the figure below. One possibility is to supply thermal energy,
for example in flames, where exothermic chemical reactions of the molecules are used
as the prime energy source. Adiabatic compression of the gas is also capable
of gas heating up to the point of plasma generation. Yet another way to supply energy
to a gas reservoir is via energetic beams that moderate in a gas volume. Beams of
neutral particles have the added advantage of being unperturbed by electric and
magnetic fields. Neutral beams are primarily used for sustaining plasma or for plasma
heating in fusion devices. The most commonly used method of generating and
sustaining a lowtemperature plasma for technological and technical application is by
applying an electric field to a neutral gas.

Generation of Plasma

Plasma are generated by supplying energy to a neutral gas causing the formation of
charge carriers Electrons and ions are produced in the gas phase when electrons or
photons with sufficient energy collide with the neutral atoms and molecules in the
feed gas (electron-impact ionization or photo ionization). There are various ways to
supply the necessary energy for plasma generation to a neutral gas. One possibility is
to supply thermal energy, for example in fl-flames, where exothermic chemical
reactions of the molecules are used as the prime energy source. Adiabatic
compression of the gas is also capable of gas heating up to the point of plasma
generation. Yet another way to supply energy to a gas reservoir is via energetic beams
that moderate in a gas volume. Beams of neutral particles have the added advantage
of being unperturbed by electric and magnetic fields. Neutral beams are primarily
used for sustaining plasma or for plasma heating in fusion devices. The most
commonly used method of generating and sustaining a low-temperature plasma for
technological and technical application is by applying an electric field to a neutral gas.
Any volume of a neutral gas always contains a few electrons and ions that are formed,
for example, as the result of the interaction of cosmic rays or radioactive radiation
with the gas. These free charge carriers are accelerated by the electric field and new
charged particles may be created when these charge carriers collide with atoms and
molecules in the gas or with the surfaces of the electrodes. This leads to an avalanche
of charged particles that is eventually balanced by charge carrier losses, so that
steady-state plasma develops.

Figure: Various ways of supplying the necessary energy for plasma generation

Here is a schematic representation of plasma formation (Figure). The primary purpose


of the first RF coupler is to convert gas into plasma by ionizing it, or knocking an
electron loose from each gas atom. It is known as the Helicon section, because its
coupler is shaped in such a way that it can ionize gas by launching helical waves
through the gas. A Helicon antenna is commonly used for generating plasma. After
the Helicon section, the gas is now ―cold plasma. The soup of electrons and the
atoms is primed for acceleration in the second stage. Where there were neutral gas
atoms, there are now ions and electrons, which are charged, and such moving charged
particles interact with magnetic fields. The magnetic field can be visualized as lines
passing with ions orbiting around each line. The second RF coupler is called the Ion
Cyclotron Heating (ICH) section. ICH is a technique used in fusion experiments to
heat plasma to temperatures on the order of those in the Sun's core.

Figure: Generation of Plasma

Benefits of Cold Plasma over Other Food Safety Technologies

Cold plasma can be used for decontamination of products where micro-organisms are
externally located. Unlike light (e.g. ultraviolet light decontamination), plasma flows
around objects which means shadow effects do not occur ensuring all parts of a
product are treated. For products such as cut vegetables and fresh meat, there is no
mild surface decontamination technology available currently; cold plasma could be
used for this purpose. Cold plasma could also be used to disinfect surfaces before
packaging or included as part of the packaging process. Energy consumption would
be similar to existing UV-C systems and the treatment of foods would be highly cost-
effective; the electronics and lifetime of plasma technologies are comparable to UV-C
systems even with the additional need for a carrier gas. Atmospheric plasma
containing high levels of bactericidal molecules (> 100 ppm ozone, nitric oxides,
peroxides, etc.) are generated with minimal power under room-temperature conditions
in seconds to minutes, with little or no product heating. Atmospheric plasma
technology (APT) requires a few hundred watts of power and a supply of compressed
air or other gas; sometimes, a gas blend is used depending on the reactive gas species
being generated. APT can generate bactericidal molecules in situ very efficiently
solely from air with product temperature increases less than 5 °C. This flexibility and
unique processing capabilities are driving the technology into new markets and
applications. Atmospheric plasma offers a number of advantages over existing food
safety technologies, including the following:
1) it is a dry process.
2) it is readily adaptable to a food manufacturing environment.
3) it requires very little energy.
4) reactive gas species revert back to original gas within minutes to hours after
treatment
5) it requires short treatment times.

Advantages:

 Novel, ultra-fast sterilization/preservation process.


 Surface treatment process doesn’t affect nutrients and vitamins within the food
 Process operates at ambient temperatures (ideal for thermo labile products)
 Depending on the plasma type, it is possible to inactivate all types of
 Low running cost (cost of natural gases and electricity)
 Environmentally friendly (uses natural gases including nitrogen, argon, air,
hydrogen and oxygen)

Disadvantages:

Cold plasma can be used for decontamination of products where micro-organisms are
externally located. Unlike light (e.g.ultraviolet light decontamination).
plasma flows around objects, which means ‘shadow effects’ do not occurensuring all
parts of aproduct are treated.For products such as cut vegetables and fresh meat, there
is no mild surface decontamination technology available currently, cold plasma could
be used for this purpose. Cold plasma could also be used to disinfect surfaces before
packaging or included as part of the packaging process. Plasmas generated by electric
discharge, similar to those used inflorescent lighting tubes, are very efficient (80%)
conversion rate for electricity to plasma. Energy consumption would be similar to
existing UV-C systems and the treatment of foods would be highly cost-effective; the
electronics and lifetime of plasma technologies are comparable to UV-C systems even
with the additional need for a carrier gas. Dry non-chemical-based sterilisation means
a reduction of chemical effluents and waste water, which is both environmental and
economically beneficial.
Cold plasma as a novel food processing technology

Potential application in food NTP has been applied in the food industry including
decontamination of raw agricultural products (Golden Delicious apple, lettuce,
almond, mangoes, and melon), egg surface and real food system (cooked meat,
cheese,).

Cold plasma used to kill bacteria on raw chicken

Pathogens such as Campylobacter and Salmonella contaminate over 70 percent of the


raw chicken meat tested Recent research from a food safety team at Pennsylvania's
Drexel University made use of high-energy, low temperature plasma to eliminate
unwanted bacteria while leaving the food basically unchanged.

Figure: A plasma torch applied to uncooked chicken

Cold plasma in food packaging

Whether labeling jam jars, printing on glass containers, or sealing liquid packaging, a
key factor in the packaging industry is the ability to process materials reliably and at
low cost. Pre treatment with atmosphericpressure plasma makes it possible to process
different materials and coatings that are sometimes very thin, for example, in the
production of composite packaging. Where packs are processed at high speed and an
adhesive bond is required, recesses in the area of the bonding surfaces usually have to
be taken into account, especially in the case of high-gloss plastic-coated surfaces. By
using Open-air plasma technology, such high-gloss gluing points are directly and
selectively pre treated inline so that reliable bonding is ensured. In labeling glass
bottles, atmospheric-pressure plasma is employed for pre treating glass. This allows
the use of a universal and low-cost water-based adhesive.One of the most common
applications of plasma in packaging is in the area of labeling. For advertising stickers,
information labels or tamper evidence, there’s always one key requirement: the glue
must be water based and the adhesive joint must not loosen by itself. When it’s torf
off a clear fiber tear should be evident. To ensure adhesion of such label, companies
such as Kraft and other leading food and beverage manufacturers make use of plasma
technology

Modification of food packaging polymers

Polyethylene (PE)
Structurally PE is one of the simplest polymers used in food packaging. PE of varying
densities, characterized by different WVTR (water vapor transmission rate), GTR (gas
transmission rate), tensile strength, heat sealing and other properties are commercially
available. This provides freedom to food manufacturers to choose the package type
optimum for their, However, the low surface energy of PE, has driven most of the
research in cold plasma towards surface modifications of PE. Surface characterization
of PE with CO2, H2O and CO2/H2O plasma has been reported

Poly (ethylene terphthalate) (PET)

PET has many desirable properties, including good strength, rigidity, high strength-
toweight ratio, transparency, thermal stability, gas barrier property, chemical
resistance and formability which make it a packaging material of choice for a wide
range of food . However, PET, like other synthetic polymers has lower surface
energy, which necessitates surface modification for good adhesion, printing and
dyeing properties. The crystalline of PET film is an important factor which
determines the changes in surface energy upon CP treatments . Surface
characterization studies for plasma treated PET film using oxygen, carbon dioxide,
nitrogen and helium plasma have been reported

Food Packaging Surface Sterilization


Most regulatory guidelines specify microbiological requirements for food packaging
materials and in many cases the packaging process is an important critical control
point in a hazard analysis critical control point (HACCP) system . Food packaging
materials are intended to preserve food quality along the distribution and storage
chain and also to protect it from deterioration, damage or outside contamination..

Printing

Surface activation and functionaliation by atmospheric-pressure plasma enables the


processing of different materials and coatings that are very thin; as for example in the
production of composite packaging. Whether labeling jam jars, printing on glass
containers, or sealing liquid packages, a key concern in the packaging
industry is the ability to process materials reliably and at low cost .

CONCLUSION REMARKS

Consumer preferences have shifted towards fresh, healthy, tasty foods, which are
readily accessible, easily stored and quickly prepared. Providing such foods in a form
suitable for mass production and distribution, which will store as readily at home as in
the supermarket, without affecting flavour, texture and colour, is technically difficult
and expensive. The majority of European food manufacturers are small companies
with few resources and limited expertise to develop and implement new technologies.
The advantages and disadvantages as well as the technical problems and potential
risks associated with new technologies are often more complicated than first
imagines. This business case, describing cold plasma processing, considers some
important issues and serves as a basis for discussion.
Important aspects of this technology are still immature, particularly with respect to its
use with food. We do not know how cold plasma inactivates spores or how the cold
plasma – specifically the electronically excited molecules – interact with the food or
packaging materials, or the stability of the plasma for large-scale commercial
operation.

There is an urgent need for regulation of safety of foods by effectively sanitizing


without compromising food quality. This has led to an increased interest in cold
plasma processing for meat, poultry, and dairy products. Cold Plasma is now being
investigated for application to foods as a sanitizing and/or conditioning step. The
atmospheric cold plasma, by far, is one of the newest technologies used in food
industry for microbial inactivation. Future studies should be directed towards
assessment of the efficacy of cold plasma on the processing of different food
products.

You might also like