Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Chipping Work (Manually)

    Uploaded by

    Chandru
    This document provides a risk assessment for chipping work conducted manually at a civil location. It identifies two basic job steps: 1) making safe access and 2) chipping work by manually. For each step, potential hazards are identified along with their potential consequences. Current control measures are described to mitigate the risks. The risks are then rated based on probability and severity both initially and residual after controls. Key controls include using fall protection equipment like harnesses and railings for working at heights, and using protective equipment like masks, gloves and goggles to mitigate dust and flying materials.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Chipping Work (Manually)

    Uploaded by

    Chandru
    1K views1 page
    This document provides a risk assessment for chipping work conducted manually at a civil location. It identifies two basic job steps: 1) making safe access and 2) chipping work by manually. For each step, potential hazards are identified along with their potential consequences. Current control measures are described to mitigate the risks. The risks are then rated based on probability and severity both initially and residual after controls. Key controls include using fall protection equipment like harnesses and railings for working at heights, and using protective equipment like masks, gloves and goggles to mitigate dust and flying materials.

    Original Description:

    HIRA for manual chipping work

    Original Title

    Chipping Work ( Manually)

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a risk assessment for chipping work conducted manually at a civil location. It identifies two basic job steps: 1) making safe access and 2) chipping work by manually. For each step, potential hazards are identified along with their potential consequences. Current control measures are described to mitigate the risks. The risks are then rated based on probability and severity both initially and residual after controls. Key controls include using fall protection equipment like harnesses and railings for working at heights, and using protective equipment like masks, gloves and goggles to mitigate dust and flying materials.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    1K views1 page

    Chipping Work (Manually)

    Uploaded by

    Chandru
    This document provides a risk assessment for chipping work conducted manually at a civil location. It identifies two basic job steps: 1) making safe access and 2) chipping work by manually. For each step, potential hazards are identified along with their potential consequences. Current control measures are described to mitigate the risks. The risks are then rated based on probability and severity both initially and residual after controls. Key controls include using fall protection equipment like harnesses and railings for working at heights, and using protective equipment like masks, gloves and goggles to mitigate dust and flying materials.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 1

    Risk Assessment/Management Form

    Ref:
    Section / Dept: civil Activity: Risk Assessment For Location:
    Contractor: Chipping work By Manually

    Proba

    ual
    Sl Basic Job Potential Consequence Current control measures Init Addition

    Resid
    Risk rating Ri

    Proba
    bility

    bility

    risk
    N Steps Hazard ial al sk
    o. Ris control ra
    k measure ti
    P E A R P
    n E A R
    All the scafold should be checked g
    before installation

    At the time of erecting and


    removal of scaffolding,the area
    Slip of man/Fall muat be barricaded and restricted
    Get Injury/Fatality for any other operation 2 0 0 1 2 4
    of materials
    All the scaffolds vertical should
    be installed on a firm base
    Use full body harness with double
    Making of Safe lanyard and anchord it above the
    1
    Access head height
    The working platform (at every
    2.1m)should have double
    railings,toeguard and a ladder as
    access.
    Working at
    Get Injury/Fatality 2 0 0 1 4
    height Take' WAH'permit before starting
    the working at height activity
    Enlist the name of work men at
    daily attachment sheet befor
    starting the activity
    Dust Effects in lungs Use of good quality nose Mask 1 0 0 0 2 2

    Use of good quality hand


    gloves,safety shoes
    Use of Chipping goggles
    Deployment skill labour only

    Chipping work Chipping activity to be carried on


    2 sitting inside the jhola which is to
    by manually Flying of
    Get injury be hanged with reject silo 1 0 0 0 2 2
    materials
    wall.While changing the position
    of work place.People shall go
    carefully from jhola sitting on the
    beam/girder with anchoring
    safety harness.Anchoring facility
    shall be made to anchor the
    harness
    Prepared By Approved By Reviwed By
    Contractor Contractor
    Date Date Date

    1of1

    You might also like