Drafting Exam
Drafting Exam
Drafting Exam
Department of Education
Region III
Division of Cabanatuan
District VI
Caalibangbangan Integrated School
9. It is an idle stock of physical goods that contain economic value, and are held in
various forms by an organization in its custody awaiting packing, processing,
transformation, use or sale in a future point of time.
1
A. Inventory Form C. Borrowers Form
B. Purchased Requisition Form D. Job/Word Order Form
10. It is a form used to request for tools and equipment needed for a particular job. It
indicates the department that the borrower is connected, the date, the job that is
to be done, who is the person to approve the request, when it was returned and if it
was in good condition
11. This instrument is used to draw circles, arcs, radii, and parts of many symbols.
A. Compass C. Protractor
B. Divider D. Tape ruler
12. It is a concave, spring-steel blade ranging from 1/4" to 1" wide and 6 to about 300
feet in length
A. Meter stick C. Triangle
B. Tape ruler D. Ruler
13. It helps a drafter keep the proportions accurate. It is also used in general drawing; its
main purpose is to reproduce the dimension in full size or to reduce or enlarge them.
A. Ruler C. Triangular Scale
B. Scale D. T- Square
14. The system for graphically representing an object by line drawing on a flat surface.
A. Orthographic Projection C. Multi-view Drawing
B. Pictorial Drawing D. Isometric Drawing
15. The common views used in multi-view drawing are ______________.
A. front, top, and sides C. front, sides and rear
B. front, rear and sides D. front, top and rear
16. A line used to show the limits of a dimension.
A. Extension line C. Dimension line
B. Object line D. Center line
17. The receding lines in oblique pictorial drawing regularly used
A. 30 degrees C. 60 degrees
B. 45 degrees D. 75 degrees
18. The receding lines in isometric drawing regularly used
A. 30 degrees C. 60 degrees
B. 45 degrees D. 75 degrees
19. In applying safety practice. What does PPE mean?
A. Patient Program Event C. Private Patient Education
B. Personal Protective Equipment D. Periodic Protective Operation
20. What does OHSC in safety practice mean?
A. Out of hours School Care C. Occupational Health and
Safety Commission
B. Occupational Health Smart Card D. Occupation Health and Safety
Consultants
21. Take out unnecessary items and dispose.
A. Seiri C. Seiso
2
B. Seiketsu D. Shitsuke
1. 2.
A B. C. A B. C.
3. 4.
A B. C.
A B. C.
5.
3
III. Identification.
A B. Name the different
C. drafting instruments, materials and tools. Select the
letter of the correct answer in the box below. Write the letter of the correct answer on
the space provided for each number. (1 point for each correct answer)
40. __________________
V. Conversion: Convert the following Decimals into Fraction or Vice Versa. 1 point each
GOD BLESS!
Prepared by:
Nathaniel S. Juan
Substitute Teacher
Approved by:
4
Republic of the Philippines
Department of Education
Region III
Schools Division Office
1. a
2. c 26-27. c
3. d 28-29. c
4. c 30-31. b
5. d 32-33. b
6. b 34-35. a
7. d 36. c
8. b 37. d
9. a 38. b
10. c 39. e
11. a 40. a
12. b 41. c
13. c 42. d
14. a 43. a
15. a 44. e
16. d 45. e
17. b 46. 0.5
18. a 47. 0.6
19. b 48. 4/5
20. c 49. 1/5
21. a 50. 7/20
22. c
23 b
24. b
25. d