D 6295 en
D 6295 en
D 6295 en
Model: C350D5B
Frequency: 50 Hz
Fuel type: Diesel
Spec sheet:
Noise data sheet (open):
Airflow data sheet:
Derate data sheet (open):
Transient data sheet:
Standby Prime
Engine rating rating
Engine manufacturer Cummins
Engine model 6LTAA9.5-G1
Configuration Cast iron, 6 cylinder
Aspiration Turbocharged and after cooled
Gross engine power output, kWm 320 290
BMEP at set rated load, kPa 2696 2448
Bore, mm 116.5
Stroke, mm 148
Rated speed, rpm 1500
Piston speed, m/s 7.4
Compression ratio 16.6:1
Lube oil capacity, L 28.1
Overspeed limit, rpm 1875
Regenerative power, kW 26
Governor type Electronic
Starting voltage 24V Volts DC
Fuel flow
Maximum fuel flow, L/hr 208
Maximum fuel inlet restriction, mm Hg (clean filter) 150
Maximum fuel inlet temperature, °C 70
Standby Prime
Air rating rating
Combustion air, L/sec 310 281
Maximum air cleaner restriction, kPa 6.2
Exhaust
Exhaust gas flow at set rated load, L/sec 833 740
Exhaust gas temperature, °C 600 580
Maximum exhaust back pressure, kPa 8
* Weights represent a set with standard features. See outline drawing for weights of other configurations.
Genset outline
Open set
Enclosed set
Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.
Alternator data
Connection Temp rise ºC Duty Alternator Voltage
Wye, 3-phase 150/125 S/P HC4E 380-440V
Applicable for supplying power Applicable for supplying power Applicable for supplying power Applicable for supplying power
to varying electrical load for to a constant electrical load for to varying electrical load for continuously to a constant
the duration of power limited hours. Limited Time unlimited hours. Prime Power electrical load for unlimited
interruption of a reliable utility Running Power (LTP) is in (PRP) is in accordance with hours. Continuous Power
source. Emergency Standby accordance with ISO 8528. ISO 8528. Ten percent (COP) is in accordance with
Power (ESP) is in accordance overload capability is available ISO 8528, ISO 3046,
with ISO 8528. Fuel Stop in accordance with ISO 3046, AS 2789, DIN 6271 and
power in accordance with ISO AS 2789, DIN 6271 and BS 5514.
3046, AS 2789, DIN 6271 and BS 5514.
BS 5514.