TECHNO-COMMERCIAL PROPOSAL

REVERSE OSMOSIS BASED WATER TREATMENT PLANT

CAPACITY 1000LPH

Client :

Mr. Rabindra Singh JI

ECO-WATER SOLUTIONS TECHNOLOGIES PVT LTD

B-83 OKHLA INDUSTRIAL AREA PHASE-I, NEW DELHI-110020,
TEL: +91-11-41024791-92, FAX: +91-11-41024790
E-MAIL: info@ecowater.co.in
Website: www.ecowater.co.in
19TH July , 2019

Kind Attn: Mr Rabindra Singh Ji

Dear Sir,

This is with the reference to your discussion undersigned had with you
for your requirement of Reverse Osmosis System having a permeate
capacity of 1000 LPH. We are hereby quoting you for the same.

We have put in our best efforts to offer you accurate prices and
products with all standard brands.

Please find enclosed the complete techno-commercial offer. If you

need any further clarifications or details, please feel free to contact
us.

Best regards,

For Eco Water Solutions Tech P. Ltd.

SACHCHIDANAND RAI
09810003753
 BID INDEX

ANNEXURE I WATER TREATMENT PLANT

ANNEXURE II SCHEDULE OF EXCLUSIONS & TERMINATIONS

ANNEXURE III PRICE SCHEDULE

ANNEXURE IV COMMERCIAL TERMS & CONDITIONS

 ANNEXURE – I

WATER TREATMENT PLANT BASED ON REVERSE OSMOSIS TECHNOLOGY

Capacity: 1,000 Lts. Per Hour (1 m3 per Hour)

BASIS OF DESIGN AND CAPACITY

OBJECT:

To commission a Reverse Osmosis System feed water 1000 liters of low TDS
water per hour.

ASSUMPTIONS:
No. Of working days : 360 days
No. Of working hours : 16 hours
Capacity utilization : 91-95%

INPUTS (Raw water Quality):

Total Dissolved Solids : < 1000 PPM

OUTPUT (Treated Water Quality):

Total Dissolved Solids : < 50 PPM

 TECHNICAL SPECIFICATIONS

CONTENTS

PRE-TREATMENT SECTION

 Raw Water Storage Tank.

 Raw water Feed pump.
 Multigrade sand bed filter.
 Activated carbon filter.
 Pressure gauges to check differential pressure. (A,B,C,D,)
 Anti Scalant Dosing System.

FINE FILTRATION & REVERSE OSMOSIS BLOCK

 Micron filter
 R.O. membrane with housing
 Stainless Steel Vertical High Pressure Pump with motor.
 SS Skid for mounting R.O. equipments and controls
 HP Switch & LP Switch for high Pressure pump

POST TREATMENT SECTION

 Ultra Violet unit

CONTROL INSTRUMENTS

 Electrical Control panel

1. TDS meter are on-line digital type
2. Pressure Gauges E, F, G, H.
3. Switches for Control with indication.

 MEMBRANE FLUSHING SYSTEM (CIP)

Membranes flushing / cleaning system with tank, SS pump, micron filter.

 SCHEME OF TREATMENT
PRETREATMENT

Pretreatment is the process aimed at keeping the membranes free from any scale
formation, deposition & biogrowth which may foul the membranes and lead to reduction
in flux over span of time and this is achieved by series of units operation starting from
Chlorination, Multigrade sand bed filter, Activated carbon filter, Antiscalent treatment,
and fine filtration. While all these unit operation are briefly described in succeeding
paragraphs, the objective is to bring pretreated water to conditions where SDI & LSI of the
water dose not pose any hazard to the membranes.

THE LIFE AND EFFICIENCY OF THE MEMBRANES ENTIRELY DEPENDS ON PRETREATMENT

SYSTEM. THEREFORE A GOOD AND EFFECTIVE PRETREATMENT SYSTEM IS AN ESSENTIAL
PART OF A PURIFICATION PACKAGE AND ENVISAGES PERFECT TREATMENT TO RID THE
WATER FROM UNDESIRABLE PHYSICAL, CHEMICAL AND MICROBIOLOGICAL IMPURITIES.

COMMON PRETREATMENT FOR R.O.

COARSE FILTRATION BY HIGH CAPACITY MULTIGRADE SAND FILTER

Raw water after oxidation is passed through Stainless steel Multigrade sand bed pressure
filter to remove suspended impurities and precipitate of iron and manganese.

ACTIVATED CARBON FILTER

Water stream coming from coarse filter is passed through Stainless steel Activated carbon
filter which ensures odour, colour free filtered water also free from residual chlorine.
To maintain desired level of minerals / TDS in final product, major part of pretreated water
shall be desalinated by R.O. with molecular rejection of dissolved solids. In molecular
rejection, the hardness forming ions (Ca & Mg) may get deposited over membrane surface
as a scale. Thus to avoid scale formation, the R.O. feed is softened by converting Ca, Mg to
Na ions.

PRETREATMENT FOR REVERSE OSMOSIS STREAM

Anti Scalent Dozing TO CONDITION R.O. FEED

A food grade anti scalent dozing is done to soften the water

FINE FILTRATION BY MULTI MICRON CARTRIDGES FILTER

By above process of pretreatment, water becomes free from undissolved solids, iron,
manganese and organic matters & filtered water upto 20 microns by particle filtration.
Keeping in view of porosity below 0.0005 microns and other characteristics of R.O.
membranes, the make have specified that ideal SDI of R.O. feed water should be below 3
which is possible if water is properly filtered by micron cartridges of rating below 5 microns.
Therefore we provided multi micron cartridges in stainless steel housing rating 5 microns to
achieve ideal SDI level.
Since in blending stream purification everything has to be removed except minerals
therefore the membranes is selected of such porosity / molecular weight cut off that there
should not be molecular rejection of inorganic dissolved solids / minerals. As a result
hardness do not precipitate over membranes and there shall not be any requirement of
water Softening plant and blending stream has to be fine filtered before ultra filtration
membranes feed.

DESALINATION BY REVERSE OSMOSIS UNIT

Reverse osmosis is based on the technology which removes total dissolved solids by their
molecular rejection. In the process pretreated water is pumped to membrane and feed
pressure is increased above osmotic pressure. As a result pure water migrates from the
concentrate to produce perfectly sterilized desalinated water. The system is designed based
on raw water analysis treated water quality & recovery. We offer R.O. block fully automatic
with synchronized logic control & instruments for on-line measurement of parameters to
ensure safe and efficient working as well as treated water quality control.

ROUTINE MEMBRANE FLUSHING / CLEANING SYSTEM

Though our pretreatment is perfect to prevent any deposition over membranes yet for
additional safety measures, we have made provision of flushing the membranes by pure
water after every fixed interval so that if any residual impurity traps over the membranes
could be flushed out.
Thus by providing a foolproof system, we avoid the cleaning of membranes for the maximum
possible period. Since cleaning may revive the unit, but it never produce the specified output
as well as quality of treated water also Detroit after cleaning.

MULTI STAGE STERLISATION

As described above, R.O. not only balance the level of minerals also sterilizes the water then
by rejecting microbiological and other impurities. Even then for a high purity as well as long
shelf life water should be highly oxidized with various processes as under :

ULTRA VIOLET UNIT

The unit produces ultra violet radiation of specified wave length 254 Nm, which are radially
passed through the water columns. As a result water get sterilized at one more step to ensure
water free from microbiological impurities.
 EQUIPMENT / COMPONENTWISE DETAILS

Raw Water Storage Tank (Client Scope)

Quantity : One No.
Material of Cons. : HDPE
Volume : 2000 liters

Raw Water Feed Pump

Quantity : One No.
Type : Horizontal Centrifugal
Material of Cons. : CI
Capacity : 1,800 Lts/hr @ 28 MWC
Make : Kirloskar
Motor : TEFC, 3 PH., 415 V, 2900 rpm

PRE-TREATMENT SECTION

COMMON PRETREATMENT FOR R.O.

PROCESS – MULTIGRADE SAND BED FILTER – TO REMOVE SUSPENDED / UNDISSOLVED

IMPURITIES.

Technical Data
Nos. off : One
Working : Down-flow
Max. Working Pressure (Kg/Cm2) : 10.0
Min. Working Pressure (Kg/Cm2) : 2.1
Max. flow rate (Lts/hr) : 4000
Min flow rate (Lts/hr) : 1000

Pressure Vessel
Type : Vertical Cylindrical
MOC : FRP
Make : Pentair
Testing Pressure (Kg/Cm2) : 10.0
Maximum Flow Rate : 4000 LPH
Working dia. (mm) : 350
Height on Straight (mm) : 1625

Filtration Media
Type : Multimedia sand with underbed
Bed Depth (mm) : 500
Operation System
Type : Semi Automatic
Flow Monitoring unit : Multiport Valve
Quantity : One No.
Size (mm) : 25
Make : Initiative

Frontal Pipe Line

MOC : PVC
Quantity : One Lott
Size (mm) : UPVC
Internal Laterals for : UPVC
Collection of filtered water

COMMON PRETREATMENT FOR R.O.

PROCESS – ACTIVATED CARBON FILTER– FOR DECHLORINATION, DEODOURING, &
DECOLOURING PLACED AFTER SAND BED FILTER.

Technical Data
Nos. off : One
Working : Down-flow
Max. Working Pressure (Kg/Cm2) : 10.0
Min. Working Pressure (Kg/Cm2) : 2.1
Max. flow rate (Lts/hr) : 4000
Min flow rate (Lts/hr) : 1000

Pressure Vessel
Type : Vertical Cylindrical
MOC : FRP
Make : Pentair
Testing Pressure (Kg/Cm2) : 10.0
Maximum Flow Rate : 4000 LPH
Working dia. (mm) : 350
Height on Straight (mm) : 1625

Filtration Media

Type : Activated Carbon with underbed

Bed Depth (mm) : 500

Operation System
Type : Semi Automatic
Flow Monitoring unit : Multiport Valve
Quantity : One No.
Size . (mm) : 25
Make : Initiative
Frontal Pipe Line
MOC : PVC
Quantity : One Lott
Size . (mm) : 25

Internal Laterals for : UPVC

Collection of filtered water

PRETREATMENT FOR R.O. STREAM

PROCESS – ANTI-SCALANT DOSING -TO AVOID SCALING OVER R.O. MEMBRANES.

Anti- Scalant Dosing System:

Feeder : Electronic Metering Type

Quantity : One No.
Capacity : 0-5 LPH @ 4 bar
Make : E-DOSE
Storage tank : PP Chemical Grade
Capacity : 100 Lts
Control : Synchronized for auto operation with feed
pump.
FINE FILTRATION & REVERSE OSMOSIS BLOCK

PRE-TREATMENT FOR R.O. STREAM

FINE FILTRATION FOR CONDITION R.O. FEED TO ACHIEVE IDEAL SDI <
3 PLACED AFTER FINE FILTRATION UNIT.

MICRON CARTRIDGES FILTER

Technical Data

Rating : 5 microns
MOC : Polyproplene – Wounded Type
Make : Filtermation/Pratham
Size : 2.0” (dia) x 20” (L)
Flow rate (Lts/hr) : 2000
Nos. off : 1
Micron Ratings : 05 micron

Cartridges Housing

Nos. off : 1 Nos.

MOC : PP
Accessories. : Inlet, Outlet connections with air vent.

CONTROL INSTRUMENTS TO ENSURE QUALITY OF PRETREATMENT OUTLET / R.O. FEED

a) Pressure Gauges : To check specified Pressures

Quantity : 6 Nos.
Type : Field Mounted
Make : Mass
Rating : 0 – 7 Kg/Cm2
Accessories : Siphon & Cock assembly

b) Testing Cock : To check water quality

Quantity : 2 Nos.
Size : 15 NB
MOC : Stainless steel

1 Lott frontal & interconnecting pipeline for pretreatment complete with flange end
fittings.
 REVERSE OSMOSIS BLOCK

Technical Data

Treated Water Quantity (Lts/hr) : 1000

(R.O. Outlet)
Working Pressure (PSIG) : 120 - 180
Permeate TDS : Less than 50 mg/l
Final Water TDS : As per Requirement

Desalination Elements / Membranes

Type : TFC Brackish water High rejection

Polyamide type
Make : DOW/HYDRNAUTICS,USA

Model : 4040

Quantity : 4Nos.

Membrane Housings

Type : Horizontal Pressure Vessel

MOC : FRP
Make : Pentair
Size : 4.2 “ x 2.2 mtr.
Quantity : 2 No

High Pressure Pump

Quantity : One No.

Type : Vertical Multistage Centrifugal
MOC : Stainless Steel – 304
Make : NANFANG
Drive Motor : TEFC, 3 PH., 415 V, 2900 rpm
Discharge Capacity (Lts/hr) : 1800 Lts/hr
Pressure (PSIG) : 125 (G & H)

Interconnecting Pipe Line

Quantity : 1 Lott
MOC : Stainless Steel – 304
 ROUTINE MEMBRANE FLUSHING / CLEANING SYSTEM

CIP SYSTEM

Technical Data

Permeate Water Storage Tank

Quantity : One No.

MOC : HDPE
Accessories : Inlet, Outlet, overflow & drain connect
Capacity (Lts) : 100

Flushing Pump

Quantity : One No.

Type : Horizontal Centrifugal
MOC : Stainless Steel – 304
Make : WILO, Germany
Drive Motor : TEFC, 3 PH., 415 V, 2900 rpm
Discharge Capacity (Lts/hr) : 1000
Pressure (PSIG) : 40

Micron Cartridges Filter

Rating : 5 microns
MOC : Polyproplene- Wounded Type
Make : Filtermation /Pratham
Size : 2.0” (dia) x 20” (L)
Flow rate (Lts/hr) : 1000
Nos. off : 1

Cartridges Housing

Nos. off : One No.

MOC : PP
Accessories : Inlet, Outlet connections with air vent.

CONTROL INSTRUMENTS FOR SAFE OPERATION FOR EACH R.O. UNIT.

a) Flow Meter : To Measure Permeate & Concentrates & Blending

flow rate

Quantity : Two Nos

Type : Rota meter (1,2)
Make : Aster
b) Pressure Gauge : To measure feed & Concentrate

Quantity : Two Nos.(E& F)

Range : 0-500 PSIG
Make : Febig/ Mass
Type : Back Mounted

c) Low Pressure Switch : To limit the min. pressure on High

Pressure pump inlet
Quantity : One No.
Capacity : 0-100 PSIG
Make : INDFOS/DANFOS

d) High Pressure switch : To limit the max. feed pressure on R.O.

inlet

Quantity : One No.

Capacity : 0-500 PSIG
Make : INDFOS/DANFOS

R.O. Skid: 1 No. for R.O. Unit

The components of R.O. block should be SS SKID mounted in a perfect aesthetic

layout and alignment for mounting of components like membrane housing, HPP,
control instruments.
 ANNEXURE- II

SCHEDULE OF EXCLUSIONS & TERMINATIONS

SCHEDULE OF EXCLUSIONS

1. All civil works, such as plant building, shed, foundation of equipments, bolts, pipe Supports,
supporting structures, platforms and mass concreting.

2. Construction of drain sump and drain channels and any special lining.

3. Plant area, building illumination, ventilation and earthing.

4. Supply of power to motors and water.

5. Raw water storage tank and pump, product water storage tank and pump.

6. All pipe work beyond our termination Points.

7. Layout of the equipments, piping, cabling and erection has been considered as per our standard
layout design. All piping, cabling, erection etc. required, as per client's specific requirement
subsequent to order finalization shall be at extra cost.

8. Design codes standards, features, specifications and supply of all items, quantity, make etc. shall
be as per our standard or as per the scope & specifications finalized at the time of order. Any
changes in design codes, standards, features, specifications, quantity, makes, addition of items
other than specified in the order shall be extra cost which shall be finalized before the same is
supplied.

9. Transit insurance shall be client's responsibility. Insurance has been arranged by us on behalf of
the client for their convenience.

10. All equipments, work and services not specifically mentioned as forming part of our offer.

11. Erection, commissioning and handling over of the plant shall be considered to have been
completed as described below:

11.1 The plant shall be considered once the equipments, media, interconnecting piping,
Instruments and accessories essential to the plant operation are in place. Minor job
completions, not affecting commissioning, shall not be the reason to consider it not
completed.

11.2 The plant shall be considered as commissioned on attaining the required water output and
quality. Minor corrections, modifications like leakages; component rectification etc. not
affecting commissioning shall be completed later.

11.3 The plant shall be considered as handed over to client once the commissioning runs/ cycles
have been completed as referred above.
TERMINATION POINTS

1. Inlet of Multigrade Sand Filter (MSF) of Reverse Osmosis Plant.

2. Permeate outlet of Reverse Osmosis Plant.

3. Reject of Reverse Osmosis Plant.

4. Overflow, backwash, drain of all vessels of R.O. Plant.

5. Inlet of all measuring tanks.

6. Inlet of Water treatment plant.

7. Outlet of Water treatment plant.

8. Power Terminals to control panel.

CIVIL WORK REQUIREMENT

Being a set- up of food industry, the plant and machinery require utmost
hygienic conditions :

Water Treatment Plant : Proper Shed with dust proof atmosphere.

Flooring & Ceiling : Colour should be white.

The floor should be properly tiled.

* There is no exhaust and is completely pollution free plant.

UTILITIES:-

We would require:

 Stable supply OF give 2000 LPH.

 Raw water storage tank for 1hr. storage.
 Civil work as per recommendation.
 Helper
 POWER: 3KW (Approx. Peak load)
 Plant Area Req.: 1000 Sq. Ft.(approx)
 3 Phase Electrical points.
 Stable electricity supply.
 ANNEXURE –III

PRICE SCHEDULE

RATE AMOUNT
S. No. DESCRIPTION QTY.
(Indian Rs.) (Indian Rs.)
Water Treatment Plant based on R.O.
Tech-nology (1,000 lts/hr.) with CIP and 2,24,000.00
1 2,24,000.00
pH correction system

2. UV System 1000 LPH 1 8,000.00 8,000.00

TOTAL 2,30,000.00
 ANNEXURE –IV

COMMERCIAL TERMS & CONDITIONS

PRICE BASIS:

The prices of machines/ plant are EX-FACTORY

 Freight extra at actual

TAX & DUTIES:

GST 18%

ERECTION & COMMISSIONING CHARGES:

All the lodging, boarding charges of our Engineer shall be borne by the client.

TERMS OF PAYMENT:
50% Advance along with the Purchase Order.
50% Against Performa Invoice before dispatch.

TRAINING:
Training at Site in Factory. Training duration minimum 1 working days.
All the expenses during the training period shall be borne by the client.

DELIVERY:
We shall supply the Plant within 15-20 DAYS from the date of receipt of Purchase
Order and advance as per terms.

VALIDITY:
This offer is valid for 1 month.

GUARANTEE/ WARRANTY:

The equipments supplied are guaranteed for a period of one year from the date of
commissioning.
Equipment Guarantee is valid against defective workmanship and/or poor performance of
the system only. Our liability is limited to repair or replace the same and subject to any wear
& tear or supply of consumables and spares due to regular operation of the system.
Cancellation of P.O.

In any case due to whatsoever reason if the P.O is cancelled the advance paid will be
forfeited and no claims will be entertained.

STATUARY VARIATION:

Any change in Govt. duties, levies, taxes or policies having direct effect on our
above quoted prices will be at client's account.
Kindly sign the duplicate as your acceptance of our offer and terms.

for Eco Water Solutions Technologies Pvt. Ltd.

SACHCHIDANAND RAI
09810003753