MSAS
MSAS
MSAS
Fail safe close barrier valve provides an independent primary barrier for gas
lifted, gas vented or for wells with sustained annulus pressure.
Challenge Features
Gas lifted, gas vented or wells with sustained annulus • Based on API 6A
pressure pose a considerable risk to personnel and
• Fire tested to API 6FD & 6FB
facilities. In these applications annulus gate valves and
ring gaskets are the primary well barrier. Gate valves • Bi-directional flow
provide only a single barrier, which can be breached upon • For gas injection and annulus venting applications
impact or collision. • Fail safe close barrier valve
• Independent barrier
Regulatory and/or company requirements may demand
mitigation for the risk that high gas volume poses. • NORSOK D-010 compliant
Solution Benefits
Petroleum Technology Company’s MSAS, provides an • Enhances well integrity
additional independent barrier in the wellhead VR pro-
• Can be used to substitute the annular safety valve
file. The MSAS is hydraulically operated and connected
to ESD. Should an impact or collision take place, the API or downhole gas vent valve, or similar down hole
6FD/FB fire tested check valve locked in the VR profile will barrier
close and remain within the wellhead, thus securing the • Eliminates the need for an ESD gate valve
annular volume of hydrocarbons.
• Easy installation and service, even in live wells
The MSAS system can be integrated in an API gate • No piping modification required (MSAS-G)
valve (MSAS-G) and has a smaller footprint as the valve
actuator is installed within the gate valve bore (see
illustration on next page).
PTC’s Dual Barrier MSAS and VR Sensors installed in a wellhead. Wellhead gate valve knocked off, no MSAS installed. Entire Annulus
volume can be vented to atmosphere.
www.ptc.as
Hydraulically activated barrier valve installed in the wellhead
VR profile
Specifications
Size Range, in. 2-1/6 to 3-1/8
Valve/ Actuator Material Alloy K500
MSAS-G System where the hydraulic actuator is installed inside the API gate valve bore. MSAS-G is designed for
applications where piping modifications are not desired or possible to perform. Cost effective and safe installations are
provided by simply replacing the excising gate valve with PTC's gate valve and MSAS-G system.
www.ptc.as