This document provides specifications for a 1000W metal halide ballast that operates at 50Hz. The ballast has a power factor of 90% or higher. It regulates both line voltage and lamp wattage to within 10% and has an open circuit voltage of 420V and line current of 4.7A while operating. The ballast is rated for temperatures up to 180C and passes high potential tests of 2000V for 1 minute and 2500V for 1 second. Core dimensions are listed and it weighs approximately 21 lbs.
This document provides specifications for a 1000W metal halide ballast that operates at 50Hz. The ballast has a power factor of 90% or higher. It regulates both line voltage and lamp wattage to within 10% and has an open circuit voltage of 420V and line current of 4.7A while operating. The ballast is rated for temperatures up to 180C and passes high potential tests of 2000V for 1 minute and 2500V for 1 second. Core dimensions are listed and it weighs approximately 21 lbs.
This document provides specifications for a 1000W metal halide ballast that operates at 50Hz. The ballast has a power factor of 90% or higher. It regulates both line voltage and lamp wattage to within 10% and has an open circuit voltage of 420V and line current of 4.7A while operating. The ballast is rated for temperatures up to 180C and passes high potential tests of 2000V for 1 minute and 2500V for 1 second. Core dimensions are listed and it weighs approximately 21 lbs.
This document provides specifications for a 1000W metal halide ballast that operates at 50Hz. The ballast has a power factor of 90% or higher. It regulates both line voltage and lamp wattage to within 10% and has an open circuit voltage of 420V and line current of 4.7A while operating. The ballast is rated for temperatures up to 180C and passes high potential tests of 2000V for 1 minute and 2500V for 1 second. Core dimensions are listed and it weighs approximately 21 lbs.
Input Watts 1080 W 1080 W 1080 W 1080 W 1080 W 230 V (BLK) CAP LAMP NOM. Open Circuit Voltage 420 V 420 V 420 V 420 V 420 V ( RED) (RED/BLK) Line Current (Amps) Operating 4.70 4.70 4.70 Open Circuit 2.05 2.30 2.70 Starting 3.80 3.65 3.50
Recommended Fuse (Amps) 15 15 15 0 0
Lamp Dropout Voltage (Line) 160 V 160 V 160 V V V COM ( YEL) COM ( YEL)
UL Temperature Ratings Insulation Class H (180°C) H (180°C) H (180°C) H (180°C) H (180°C) Wiring Diagram Temperature Code C -22°F -30°C -22°F -30°C -22°F -30°C -22°F -30°C -22°F -30°C 0.250 Dia Thru MIN. Starting Temperature 8 Holes A CAPACITOR Specifications B Microfarads 30 uf 30 uf 30 uf 30 uf 30 uf MAX Volts (min.) 460 V 460 V 460 V 460 V 460 V
Input Open Circuit Current (A) 0.75 - 1.75 0.65 - 1.90 0.95 - 2.15 - - Input Short Circuit Current (A) 5.85 - 8.75 5.85 - 8.75 5.85 - 8.75 - - Reference Drawing
High Potential 2000 V 2000 V 2000 V 2000 V 2000 V Capacitor: 005-11097-MF Ignitor: None Test 1 Minute Test 1 Second 2500 V 2500 V 2500 V 2500 V 2500 V Temp Rating: 90 °C
Core and Coil Specifications Height: 3.95 in
Dimension A 3.40 in 3.40 in 3.40 in 3.40 in 3.40 in Width / Diameter: 2.91 in Dimension B 5.30 in 5.30 in 5.30 in 5.30 in 5.30 in Weight 21 lbs 21 lbs 21 lbs 21 lbs 21 lbs Lead Lengths (inches) 12-14 12-14 12-14 12-14 12-14 Coil Material (Pri. / Sec.) Cu / Al Cu / Al Cu / Al Cu / Al Cu / Al This Ballast does not Document #: 010-12386-02 require a Ignitor Date: 9/26/2017 Status: Production Replaces Catalog #: New Design A For alternate capacitor construction consult sales
Data is based upon tests performed by Universal Lighting Technologies in a controlled environment and is representative of relative performance. Actual performance may vary depending on operating conditions. Specifications are subject to change without notice.
9/18/2017 Universal Lighting Technologies 51 Century Blvd. Suite 230 - Nashville, TN 37214 Phone 1-800-225-5278 Fax 1-800-206-0035 www.unvlt.com
