ALMO 1/3/6

ALARM MONITOR – STATIONARY DOSE RATE

MONITORING SYSTEM WITH EXTERNAL
DETECTORS

ALMO BENEFITS KEY FIGURES

3 models
The ALMO alarm monitors are designed • microcontroller-based
to measure dose rate levels in labo- measurement electronics
ratories and production facilities. The • dose rate measurements displayed available
systems consist of a head unit with LC in n/μ/mSv/h with autoranging
display and electronics, combined with function

1/3/6 probes
one or more probes and external alarm • user configurable alarm thresholds
units. Depending on the version, it is per probe
possible to connect 1, 3 or 6 detectors • easy-to-operate measurement
Errors excepted. Technical changes reserved.

to the ALMO head units. The dose rates system

attachable
of the multi-channel systems (ALMO-3 • ergonomic housing, for desktop or

GM- & NaI-

and ALMO-6) are displayed individu- wall mounting
ally for each channel. The stand-alone • various visual/acoustic alarm units
ALMO-systems can be connected to a can be connected
PC-system for central monitoring and
data recording.
• software for continuous dose rate
measurement, including data
storage
detectors available
• also available with integrated
battery backup

NUVIATech Instruments • www.nuviatech-instruments.com • instruments@nuviatech.com

 FIELDS OF APPLICATION
• workplace and facility monitoring, • ward and/or patient monitoring in • exhaust air monitoring
e.g. in hot cells and laboratories nuclear medicine/radiotherapy, e.g. • monitoring of test facilities for non
• system monitoring, e.g. in isotope in radioiodine therapy or afterloading destructive testing
production • monitoring and selection in sorting • warehouse monitoring, e.g.
boxes for radioactive waste collection sites for radioactive waste

AFTERLOADING
The ALMO-1 system is used by different system running in case of a power with alarm signal for the area outside
manufacturers of afterloading systems failure. An external alarm with 3 lights the therapy room (e.g. corridor or
for brachytherapy. (red/yellow/green) and an acoustic control room). These units are
alarm show the operational status controlled in a similar way via
In this case, the main task of the alarm of the system, both visually and the ALMO-system. An electronic
monitor is to indicate if the therapy acoustically: green = closed source, interlock - if present - can also be
source is open or closed. For that pur- yellow = error, red = open source, operated via the ALMO-system.
pose the ALMO-1 is usually combined red + acoustic alarm = open source
with GM-probe type 18550. Generally and open door. In addition to the This function is often used as safety
the version with integrated battery visual alarm, some manufacturers use feature, particularly in hot cells.
backup is used in order to keep the a second warning light or a matrix sign

BUILT-IN VERSION
Especially for the manufacturers of hot
cells and isotope production facilities,
we have developed a built-in version for
our ALMO alarm monitors. Instead of
the standard housing for desktop or wall
mounting, the ALMO has a stainless
steel housing with mounting points. The
housing is integrated in the hot cell co-
ver or the door of a switch cabinet. The
screen with buttons and LEDs fits into
the cutout to be flush with the surface.

This solution has significant advantages

particularly with regard to the perman-
ently increasing clean room conditions,
Errors excepted. Technical changes reserved.

because the contamination risks and

the extensive cleaning process for hou-
sing parts and cabling are avoided.

There is a reduced contamination risk

and complex cleaning is not required.

NUVIATech Instruments • www.nuviatech-instruments.com • instruments@nuviatech.com

 STANDARD MODELS

ALMO-1
electronics: microcontroller -based measurement electronics,
one-channel system (1 detector connectable)
display: LCD with LED illumination during continuous operation
keyboard: foil keyboard
housing: 200 x 150 x 75 mm (L x B x H) applicable as:
 wall housing  desktop housing
weight: approx. 700 g
power supply: 100-240 V ~, 47-63 Hz
power consumption: 15 W
alarm: optical and acoustic, optionally external alarm unit,
quit function
temperature: 0° C up to +50° C, 0 - 95% relative humidity
(no condensation)
interfaces: 2 relay outputs (24 V, 500 mA or potential-free, max. 24 V,
1 A) e.g. for LED-lamp with 3 levels, siren, interlock,
RS 232 / 422 / 485 or USB-interface (selectable via menu)

ALMO-3
similar to ALMO-1, but with the following differences:

electronics: microcontroller -based measurement electronics,

multi-channel system (up to 3 detectors connectable)
housing: 280 x 300 x 120 mm (L x B x H) applicable as:
 wall housing  desktop housing
weight: approx. 2,2 kg
power consumption: 60 W
interfaces: 2 relay outputs per channel (24 V, 500 mA or potential free,
max. 24 V, 1 A) e.g. for lamp with 3 levels, siren, interlock,
2 serial interfaces (selectable via menu)
A: selectable RS 232 / 422 / 485 or USB
B: selectable RS 232 / 422 / 485
In addition: Ethernet port
Errors excepted. Technical changes reserved.

ALMO-6
similar to ALMO-3, but with the following differences:

electronics: microcontroller -based measurement electronics,

multi-channel system (up to 6 detectors connectable)

NUVIATech Instruments • www.nuviatech-instruments.com • instruments@nuviatech.com

 COMPATIBLE DETECTORS
ALMO-3 and ALMO-6-systems can be combined with the following detector types (Different warranty for GM-probes: 1 year,
no guarantee on used up GM-tubes (gas)):
dimensions (lenght, Ø) /
type energy range measurement range
weight
GM-detector 18545 CE 40 keV – 1.3 MeV 150 nSv/h – 200 µSv/h L: 345 mm, Ø 25/40 mm, 380 g
GM-detector 18550 CE 40 keV – 1.3 MeV 10 µSv/h – 20 mSv/h L: 110 mm, Ø 40 mm, 150 g
GM-detector 18509 CE 55 keV – 1.3 MeV 50 µSv/h – 1 Sv/h L: 110 mm, Ø 40 mm, 150 g
GM-detector 18529 CE 70 keV – 3 MeV 500 µSv/h – 10 Sv/h L: 110 mm, Ø 40 mm, 150 g
GM-detector 70031A 40 keV – 1.3 MeV 0.3 µSv/h – 2 mSv/h L: 350 mm, Ø 26/34 mm, 360g
GM-detector 70013A 40 keV – 1.3 MeV 0.5 µSv/h – 10 mSv/h L: 249 mm, Ø 34/25 mm, 240g
GM-detector 70019A 45 keV – 1.3 MeV 1 µSv/h – 100 mSv/h L: 122 mm, Ø 22 mm, 85g
GM-detector 70014A 55 keV – 1.3 MeV 10 µSv/h – 1 Sv/h L: 100 mm, Ø 18 mm, 46g
NaI-scintillation detector 25B38 25 keV – 1.3 MeV 40 nSv/h – 200 µSv/h L: 38 mm (active), Ø 25 mm, 200 g
NaI-scintillation detector 38B51 25 keV – 1.3 MeV cps only L: 51 mm (active), Ø 38 mm, 200 g
NaI-scintillation detector 76B76 25 keV – 1.3 MeV cps only L: 76 mm (active), Ø 76 mm, 200 g

OPTIONS AND ACCESSORIES

External alarm units
Visual and acoustic alarm units are available for connection to all ALMO systems. Available with 1,
2 or 3 lights and with or without buzzer and flashing light. They can be ordered for wall mounting
as well as for desktop installation.

Additional external displays

Depending on the facility layout it may be necessary to duplicate the
for one or more detectors at a location away from the main head unit.
The duplicate display offers a high comfort with task-specific parameter
setting.

Software
The optional software can display the measurements graphically and store data. The dose rate
measurement can be displayed in a graph, as a function of time. During the real-time data, lamp
symbols (green/yellow/red) can be displayed for a fast assessment of the radiological conditions.
Errors excepted. Technical changes reserved.

Made in Germany
NUVIATech Instruments uses exclusive know-how and state-of-the art technologies in its monitoring systems dedicated
to six major fields of application: waste management, homeland security, laboratories, health physics, continuous process
monitoring and environmental monitoring.

Please visit www.nuviatech-instruments.com and www.nuviatech-healthcare.com for more information.

NUVIATech Instruments • www.nuviatech-instruments.com • instruments@nuviatech.com