3 Flowserve Catalogue

PRODUCT CATALOG
Pumps | Seals | Valves | Actuation
Experience In Motion
flowserve.com 1
TABLE OF CONTENTS
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Valves. . . . . . . . . . . . . . . 140
Industries. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ball. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Services. . . . . . . . . . . . . . . 8 Butterfly. . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Rotary Control. . . . . . . . . . . . 162
Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Linear Control . . . . . . . . . . . . 168
Overhung. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Severe Service Control . . . . . . . . . . . . . . . . 178
Between Bearings. . . . . . . . . . . 30 Gate. . . . . . . . . . . . . . . . 186
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Globe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Positive Displacement. . . . . . . . . . . . . . . . . . 56 Check . . . . . . . . . . . . . . . 198
Side Channel. . . . . . . . . . . . . 60 Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Vacuum Pumps & Compressors. . . . . . . . . . 68
Specialty Products. . . . . . . . . . . . . . . . . . . . 74 Actuation & Instrumentation . . . . . . . . . . 216
Electric Actuation. . . . . . . . . . . 218
Seals. . . . . . . . . . . . . . . . 84 Gearboxes. . . . . . . . . . . . . . . . . . . . . . . . . . 226
Standard Cartridge. . . . . . . . . . . . . . . . . . . . 86 Fluid Power Actuation. . . . . . . . . 230
Pusher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Positioners. . . . . . . . . . . . . . . . . . . . . . . . . . 242
Metal Bellows . . . . . . . . . . . . . . . . . . . . . . . . 98 Switch Boxes. . . . . . . . . . . . . . . . . . . . . . . . 250
Mixer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Software. . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Compressor Seals and Systems. . . . . 108
Slurry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Index . . . . . . . . . . . . . . . 258
Gas Barrier and Containment. . . . . . 118
OEM and Special Duty. . . . . . . . . . . . . . . . 122
Seal Support Systems. . . . . . . . . 128
Accessories. . . . . . . . . . . . . 134
2 Flowserve Corporation
Pumping systems from Flowserve meet customer demands in the most
arduous services. Our world-renowned brands of pre-engineered,
engineered and special purpose pumps give customers access to the PUMPS 10
most impressive portfolio of proven hydraulic and mechanical know-how.
Whether for pumps, compressors, mixers or steam turbines, Flowserve

mechanical sealing solutions keep rotating equipment running safely
and efficientl . You’ll find them in the toughest applications, such a SEALS 84
flashing hyd ocarbons, abrasive slurries and ultra-high pressure gases.
Flowserve valves are found in the world’s toughest industries, where

reliable performance is the only option. High temperatures, ultra-high
pressures, erosion and corrosion are at the core of the dozens of VALVES 140
leading brands that comprise our broad valve portfolio.
From positioners and switches to remotely controlled, fully automated

electric, hydraulic and pneumatic actuators, customers depend on ACTUATION &
216
the full range of intelligent automation solutions from Flowserve to
help their processes run smarter, safer and more efficientl .
INSTRUMENTATION
flowserve.com 3
EXPERIENCE IN MOTION
Every day, our customers are challenged to take their plant operations
to the next level. To do that, they need partners who deliver much more
than products.
Flowserve is answering that call. We’re working with the world’s most
important providers of oil and gas, power, chemicals, water and other
essential products to solve the absolute toughest challenges in flui
motion and control.
Our industry-leading portfolio of pumps, seals, valves and actuation

is only part of the story. Our customers need answers that demand
extensive know-how and experience, and we’ve got it. More than
18 000 committed associates are go-to resources for expert engineering,
project management, technical support and service in every corner
of the world.
Expertise and Experience
Flowserve has an unrivaled combination of

technical expertise and practical experience
to help you solve the toughest fluid motion
control challenges.
Comprehensive Portfolio
Flowserve offers the world’s most

complete portfolio of pumps, seals,
valves and actuation. As a result, you’ll
Proven Quality and Reliability get the best solution with minimal time
shopping and evaluating.
Flowserve products are designed for
maximum safety and reliability — all to help
you reduce unplanned downtime while
keeping workers and plant assets safe.
Technology and Insights Local Support Worldwide

We help maximize your systems’ Flowserve is everywhere you do business.
efficiency and uptime by applying flo Our global network of Quick Response
specific technologies and advanced Centers helps to minimize downtime
aftermarket capabilities, all supported with hands-on support that’s fast and
by a vast team of technical resources. dependable.
flowserve.com 5
INDUSTRIES
The world’s infrastructure industries rely on Flowserve to solve their most complex fluid
motion and control challenges. We deliver more than the most complete portfolio of pumps,
seals and valves; we help our customers exceed their operational goals. We understand
that profitable performance requires critical process equipment and systems operate safely,
reliably and at maximum efficiency. Our commitment to meeting these expectations for our
customers drives everything we do.
OIL AND GAS

From production wells deep on ocean floors and remote oil sands, to
transportation infrastructures that span continents and refineries that create
the world’s feedstocks — global energy companies push the limits of
fluid motion and control. They need solutions for increasingly demanding
applications. To meet their high-temperature, high-pressure processing
needs, Flowserve provides unmatched mechanical, hydraulic and materials
know-how and the industry’s most complete flow management portfolio.
Backed by service and support teams around the globe, we can help
maximize uptime, productivity and safety, and keep you at the forefront
of innovation.
CHEMICAL
Aggressive corrosion and erosion. Hazardous, toxic substances. Application
variation that makes equipment specification more than a little challenging.
The chemical industry faces tough challenges, and Flowserve is in the
middle of them, solving our customers’ most difficult hurdles every day.
Our solutions span the industry, from basic, organic, specialty and fine
chemicals to biofuels and pharmaceuticals. We continue to build on
our materials science heritage and advance sealing and flow control
technologies. We do this to help customers improve performance,
maximize service life and keep personnel safe.
POWER
Rapid load variations, frequent stops and starts, and the highest temperatures,
flows and pressures. Welcome to fluid motion and control in the power
industry. These grueling applications are where Flowserve became a driving
force in power generation. To appreciate our role, you needn’t look further
than our pioneering work in nuclear power or the massive machines we’ve built
for conventional steam plants. But that’s history. Today, we’re developing next
generation solutions to meet the newest challenges, including concentrated
solar, biomass and geothermal.
WATER RESOURCES
Whether for flood control, desalination, distribution, waste management or
agriculture, those who move water need to do it economically, sustainably
and reliably. They need low-maintenance equipment and high-efficiency
systems that minimize energy consumption. They also need partners who
ensure the right solution is specified every time to minimize environmental
impacts and control total life cycle costs. Supplying flow management systems
for the global water resources is a commitment with far-reaching implications.
That’s why the world’s leading municipalities and water system providers
trust Flowserve.
GENERAL INDUSTRY
From paper and metals to sweeteners and electronics, most of the world’s
products depend on reliable fluid motion and control solutions. Endless
demanding and complicated application parameters are found in industries
such as food and beverage, mining, steelmaking, and pulp and paper.
Flowserve has a global portfolio of solutions and technical expertise
capable of tackling the tough and often unique requirements found in
these industries. A global network of Quick Response Centers delivers
the timely technical support, parts and service needed to keep operations
running dependably and profitably.
flowserve.com 7
SERVICES
SERVICES THAT DRIVE SAFETY, RELIABILITY AND PERFORMANCE

Flowserve offers a comprehensive suite of services designed to provide unprecedented
value and cost savings throughout the life span of the system. By integrating hydraulic,
mechanical and materials engineering knowledge with real-world operating and practical
business solutions, Flowserve helps customers:
• Increase equipment reliability
• Optimize asset uptime and performance
• Improve plant and personnel safety
• Lower total cost of maintenance
PARTS, REPAIRS, UPGRADES AND FIELD SERVICES

Investments in well-equipped Quick Response Centers, mobile service
fleets, and advanced manufacturing technologies along with the unrivaled
expertise of its engineers, technicians and craftsmen enable Flowserve to
address virtually every service requirement for process equipment, on-
or off-site, regardless of OEM.
• Repair and Upgrades — From machining to mechanical upgrades to

on-site management, Flowserve repairs and upgrades services to improve
equipment performance while reducing downtime and costs.
• Replacement Parts and Components — Using its broad network of

service and manufacturing centers, Flowserve supplies customers with
the quality parts needed to keep operations running smoothly and profitably.
• Field Services — From maintenance to management, highly qualified

Flowserve project managers, engineers and technicians can be deployed
on-site to help your operations run smoothly.
ENGINEERING AND TECHNICAL SERVICES
With world-class engineering and technical resources in more than
55 countries, Flowserve delivers value-added solutions that improve
operational performance and increase profitability for its customers.
• Technical Assessments — Flowserve can perform system audits to

identify operational issues that may be constraining output or elevating
operating costs and recommended solutions.
• Reliability Services — Flowserve offers standard solutions to improve

rotating equipment reliability while lowering cost of ownership.
• Engineering Support — Flowserve engineers can engage remotely

or on-site to support grassroots project planning, system design or
project management requirements.
ASSET MANAGEMENT AND OPTIMIZATION

Flowserve continues to invest in capabilities and technologies to help customers realize more payback from
their plant assets.
• LifeCycle Advantage — Through a combination of on-site assessments and technology, Flowserve experts
help customers benchmark operational performance, define key metrics and implement solutions to achieve
their long-term operational goals.
• Intelligent Performance Solutions — By employing sophisticated products, services and software to collect,
examine and understand data, Flowserve helps customers use predictive analytics to take action and improve
asset reliability.
EDUCATION AND TRAINING

Flowserve offers a wide range of innovative programs to help plant operators, reliability specialists, engineers
and maintenance personnel deepen their understanding of critical equipment and processes.
• Learning Resource Centers — At its state-of-the-art Learning Resource Centers, Flowserve provides
hands-on training and instruction in the principles of equipment operation, maintenance and reliability.
• Customer On-site Training — Flowserve can design, develop, and deliver training programs tailored
specifically around the people, equipment and processes at a customer’s facility.
• Online Training — Flowserve offers web-based modules with online testing and reporting to ensure
comprehension of the most important principles.
flowserve.com 9
10
PUMPS
PUMPS
The most aggressive fluids and slurries on Overhung. . . . . . . . . . . . . . . . . . . . . . . . 12
the planet. High-volume and high-pressure Between Bearings. . . . . . . . . 30
Vertical. . . . . . . . . . . . . . . . . . . . . . . . . . 44
applications that test the limits of hydraulic
Positive Displacement. . . . . . . . . . . . . . 56
and mechanical design. That’s where you’ll
Side Channel. . . . . . . . . . . 60
find Flowserve pumps pe forming efficientl ,
Vacuum Pumps & Compressors. . . . . . 68
safely and reliably. It’s a legacy that goes
Specialty Products . . . . . . . . . . . . . . . . 74
back centuries — one we build upon every
day, outperforming expectations no matter
how great the demands.
Global customers can easily find

configurations to p ecisely match the
pumping requirements that drive their
operations, even specialty applications
most pump companies have never heard of.
From small pumps that dependably process
thousands of end products day-in and day-
out, to massive machines that efficiently
move the fluids that a e the lifeblood of our
industrial infrastructure, Flowserve carefully
engineers the highest degrees of reliability
and performance into every product. It’s a
commitment that ensures maximum uptime
from every pump we deliver.
flowserve.com 11
HPX
12
PUMPS | OVERHUNG
OVERHUNG
Reliable, efficient performance across a full range of applications, from highly aggressive
chemicals and solids to high-temperature process applications: that’s what’s engineered
into every Flowserve overhung pump. Our global customers will find a range of metallic
and non-metallic pumps built to every important global standard. Extended life is achieved
through careful attention to details, from critical impeller clearances to mechanical seal
operating environments to rugged power end bearing arrangements. Plus, maintenance-

friendly features help get pumps back in service quickly.
Overhung – Quick Reference*

Product Sub-Type Flows to Heads to Pressures to Temperatures
Chemical Process 1400 m3/h 220 m 25 bar -80°C to 400°C

Mark 3™ ISO ASME, ISO (6160 gpm) (720 ft) (362 psi) (-110°F to 750°F)

Mark 3 ASME ASME, ISO (20 000 gpm) (700 ft) (400 psi) (-100°F to 700°F)
Chemical Process 375 m3/h 215 m 24 bar to 290°C

Guardian ASME, ISO (1650 gpm) (700 ft) (350 psi) (550°F)

TB-MAG™ ASME, ISO (1585 gpm) (500 ft) (362 psi) (-20°F to 250°F)

U-MAG™ ASME, ISO (450 gpm) (165 ft) (300 psi) (-20°F to 250°F)

CBE and CBM ASME, ISO (2862 gpm) (492 ft) (362 psi) (-40°F to 572°F)

CBT ASME, ISO (9686 gpm) (524 ft) (362 psi) (-4°F to 662°F)
* Additional products shown on next two pages
flowserve.com 13
Overhung – Quick Reference, cont‘d.
455 m3/h 150 m 15 bar to 120°C

D800 Industrial Process
(2000 gpm) (500 ft) (220 psi) (250°F)
MEN and 800 m3/h 140 m 16 bar -10°C to 120°C

Industrial Process
MENBLOC (3520 gpm) (450 ft) (230 psi) (15°F to 250°F)
3000 m3/h 110 m 16 bar to 120°C

ME Industrial Process
(13 208 gpm) (361 ft) (230 psi) (250°F)
5700 m3/h 110 m 27 bar to 120°C

DS Industrial Process
(25 000 gpm) (350 ft) (400 psi) (250°F)
ZLN, ZLK 1800 m3/h 140 m 16 bar to 170°C

Industrial Process
and ZLI (7925 gpm) (459 ft) (232 psi) (338°F)
ZTN, ZTK 1000 m3/h 95 m 16 bar to 350°C

Industrial Process
and ZTI (4403 gpm) (311 ft) (232 psi) (662°F)
ZEN, ZDN, 600 m3/h 90 m 40 bar to 230°C

Industrial Process
ZHN and ZDI (2642 gpm) (295 ft) (580 psi) (446°F)
1200 m3/h 100 m 10 bar to 110°C

DBS Industrial Process
(5283 gpm) (328 ft) (145 psi) (230°F)
135 m3/h 70 m 12 bar -40°C to 120°C

SMP Industrial Process
(600 gpm) (220 ft) (175 psi) (-40°F to 250°F)
500 m3/h 250 m 25 bar to 105°C

F-Line Industrial Process
(2200 gpm) (820 ft) (362 psi) (220°F)
2700 m3/h 15 m 7 bar to 100°C

MVE Industrial Process
(11 890 gpm) (50 ft) (100 psi) (212°F)
9085 m3/h 100 m 14 bar to 150°C

FRBH Industrial Process
(40 000 gpm) (330 ft) (200 psi) (300°F)
600 m3/h 35 m 5 bar to 75°C

MPT Solids Handling
(2650 gpm) (115 ft) (72 psi) (165°F)
600 m3/h 90 m 19 bar to 63°C

MF and MFV Solids Handling
(2650 gpm) (300 ft) (275 psi) (145°F)
45 500 m3/h 90 m 17 bar to 63°C

MN and MNV Solids Handling
(200 000 gpm) (300 ft) (240 psi) (145°F)
4545 m3/h 90 m 11 bar to 40°C

MSX Solids Handling
(20 000 gpm) (300 ft) (160 psi) (104°F)
PUMPS | OVERHUNG
10 000 m3/h 90 m 10 bar to 120°C

M Slurry
(44 000 gpm) (300 ft) (150 psi) (250°F)
10 000 m3/h 50 m 10 bar to 110°C

R Slurry
(44 000 gpm) (160 ft) (150 psi) (225°F)
3600 m3/h 90 m 40 bar to 110°C

Titan-Slurry Slurry
(16 000 gpm) (300 ft) (580 psi) (230°F)
8000 m3/h 90 m 25 bar to 140°C

LC Slurry
(35 200 gpm) (300 ft) (360 psi) (285°F)
2000 m3/h 350 m 80 bar -160°C to 450°C

HPX API Process
(8800 gpm) (1100 ft) (1160 psi) (-250°F to 842°F)
900 m3/h 400 m 40 bar to 450°C

PHL API Process
(3963 gpm) (1312 ft) (600 psi) (842°F)
1100 m3/h 230 m 60 bar -50°C to 350°C

ERPN API Process
(4800 gpm) (755 ft) (870 psi) (-158°F to 660°F)
500 m3/h 275 m 40 bar -100°C to 250°C

PVXM API Process
(2200 gpm) (900 ft) (600 psi) (-148°F to 480°F)
45 m3/h 440 m 64 bar -46°C to 260°C

HWMA API Process
(200 gpm) (1445 ft) (930 psi) (-51°F to 500°F)
500 m3/h 275 m 40 bar -100°C to 250°C

PVML API Process
(2220 gpm) (900 ft) (580 psi) (-148°F to 480°F)
34 m3/h 900 m 64 bar -46°C to 250°C

MSP API Process
(150 gpm) (2955 ft) (930 psi) (-51°F to 482°F)
1300 m3/h 370 m 42 bar -46°C to 400°C

HWX API Process
(5725 gpm) (1215 ft) (610 psi) (-51°F to 750°F)
HPX6000 and 3409 m3/h 244 m 83 bar -20°C to 400°C

API Process
HPXM6000 (15 000 gpm) (800 ft) (1200 psi) (-30°F to 826°F)
34 065 m3/h 11 m 10.3 bar 20°C to 149°C

AFH9000 Axial Flow
(150 000 gpm) (36 ft) (150 psi) (-30°F to 300°F)
flowserve.com 15
OVERHUNG
CHEMICAL PROCESS – ASME, ISO
Mark 3 ISO
ISO 2858/5199 compliant pump for corrosive applications in chemical, hydrocarbon and pharmaceutical processing
requiring unmatched reliability, outstanding hydraulic performance and increased pump availability.
• Lower total cost of pump ownership resulting from simplified maintenance and SPECIFICATIONS
extended bearing and seal life associated with reverse vane impeller Flows to: 1400 m3/h (6160 gpm)
• Increased reliability and mechanical seal life due to the ideal seal environment created Heads to: 220 m (720 ft)
by the SealSentry™ seal chamber Press. to: 25 bar (362 psi)
• Simplified maintenance with two-piece p wer end featuring self-contained bearing Temp: -80°C to 400°C
housing and external impeller adjustment mechanism (-110°F to 750°F)
• Optimal, predictable seal chamber pressure that is established after every impeller
Durco® setting Refer to literature PS-10-31
at flowse ve.com/library.
Mark 3 ASME
ASME B73.1 chemical process pump for corrosive applications in chemical, petrochemical, hydrocarbon and
pharmaceuticals processing requiring unequaled efficien y, extended life and repeatable pump performance.
• Lower total cost of ownership from reverse vane impeller, which eases maintenance SPECIFICATIONS
and provides renewable, high-efficien y performance over the pumps’ life Flows to: 4540 m3/h (20 000 gpm)
• Increased reliability and mechanical seal life due to the ideal seal environment created Heads to: 215 m (700 ft)
by the SealSentry seal chamber Press. to: 27 bar (400 psi)
• Ease of maintenance resulting from optimal, predictable seal chamber pressures that Temp: -73°C to 370°C
Durco are re-established after every impeller setting (-100°F to 700°F)
• Extended mechanical seal and bearing life through robust shaft and bearing designs
that also minimize shaft deflection Refer to literature PS-10-13
Guardian
Metallic sealless magnetic drive pump compliant with ASME B73.1, ASME B73.3 and HI 5.1-5.6 that is designed for
applications requiring efficient performance and emissions-free reliabilit .
• Optimal performance through a highly engineered internal lubrication fl w paths SPECIFICATIONS

designed to maximize cooling of the bushings and journals Flows to: 375 m3/h (1650 gpm)
• Ease of maintenance due to standard and contained back pullout, allowing the casing Heads to: 215 m (700 ft)
to stay in-line and piping connections to remain intact Press. to: 24 bar (350 psi)
• Higher process temperature range capabilities with the use of strong samarium cobalt Temp: to 290°C (550°F)
rare earth magnets in the couplings
Durco • Longer service life resulting from silicon carbide bushings and journals that resist Refer to literature PS-10-14
wear and corrosion at flowse ve.com/library.
VALVES | || OVERHUNG
PUMPS
TB-MAG
OVERHUNG
LINEAR CONTROL
ASME B73.3 and ISO 2858 compliant thrust-balanced, fluoropolyme -lined, magnetic drive pump for chemical
processing, metals and other industries seeking outstanding leak protection and reliability.
• Efficient performance over the entire flow range is achieved by means of a SPECIFICATIONS
dynamic thrust balancing system that eliminates the need for thrust bearings Flows to: 360 m3/h (1585 gpm)
• Application versatility due to ability to handle solids to 30% by volume Heads to: 153 m (500 ft)
• Expedited, lower-cost maintenance due to standard and contained back pullout, Press. to: 25 bar (362 psi)
allowing the casing to stay in-line and piping connections to remain intact Temp: -29°C to 121°C
• Longer service life resulting from silicon carbide back wear rings that restrict (-20°F to 250°F)
solids larger than 0.127 mm from entering the containment shell and double-
INNOMAG® sealed inner magnetic assembly to protect against corrosive permeation Refer to literature PS-10-36
U-MAG
Versatile fluoropolyme -lined, magnetic drive pump for smaller-volume applications needing exceptional safety,
enhanced performance and highest purity standards.
• Application versatility derived from numerous mounting drive options to SPECIFICATIONS

accommodate site-specific requirements including gasoline engines for portable Flows to: 102 m3/h (450 gpm)
and remote chemical transfer, trunk unloading, or skid or cart operation Heads to: 50 m (165 ft)
• Longer service life due to EFTE or optional ultra-high purity PFA construction that Press. to: 20 bar (300 psi)
offers excellent chemical resistance Temp: -29°C to 121°C
• Regulatory compliance resulting from outstanding leak protection and the CE (-20°F to 250°F)
INNOMAG mark, making it compliant with directives such as ATEX
Refer to literature PS-10-37
CBE and CBM

Modular process pumps with hydraulics, closed impellers, and magnetic couplings for bare shaft (CBM) or
close-coupled (CBE) configur tions. Meets all ISO 5199, ISO 15783 and ISO 2858 requirements.
• Increased reliability enabled by constant cooling and lubrication fl w, protected SPECIFICATIONS

samarium cobalt magnets and containment shell Flows to: 650 m3/h (2862 gpm)
• Reduced spare parts costs derived from interchangeability of the back pullout Heads to: 150 m (492 ft)
assemblies Press. to: 25 bar (362 psi)
• Improved reliability and reduced installation cost thanks to low net positive Temp: -40°C to 300°C
suction head (NPSH) value (-40°F to 572°F)
SIHI® • Broad application diversity made possible by CBE heat barrier option for
temperatures up to 400°C (752°F) Refer to literature PS-10-42
flowserve.com 17
OVERHUNG
CHEMICAL PROCESS – ANSI, ISO
CBT
Single-stage pump with ISO 2858/5199 design features and nominal rating. Engineered for applications in chemical,
petrochemical and pharmaceuticals processing with fl ws beyond the range defined by ISO 2858
• Low total cost of pump ownership from simplified maintenance enabled by a design SPECIFICATIONS
that permits dismantling without disconnecting the pump casing from pipework Flows to: 2200 m3/h (9686 gpm)
• Broad application flexibility and l w inventory carrying costs from diverse material Heads to: 160 m (524 ft)
options and 21 sizes, with only four different bearing brackets for maximum Press. to: 25 bar (362 psi)
interchangeability Temp: -20°C to 350°C
• High-temperature performance — exceeding 200°C (392°F) — possible with (-4°F to 662°F)
centerline mounted option, which minimizes distortion and pipe loads
SIHI
INDUSTRIAL PROCESS
D800
Versatile and cost-effective general industry pumps with ASME B16.1 casing nozzles. Available in frame-mounted (D814)
and close-coupled (D824) configur tions.
• Increased uptime enabled by a precision dry-rabbet fit with one-piece ad pter and SPECIFICATIONS
seal cover to ensure positive alignment Flows to: 455 m3/h (2000 gpm)
• Easy maintenance and assembly facilitated by pre-set mechanical seal assembly on Heads to: 150 m (500 ft)
the shaft sleeve Press. to: 15 bar (220 psi)
Worthington® • Improved energy efficien y due to a precision-cast, high-efficien y closed impeller Temp: to 120°C (250°F)
that is statically and hydraulically balanced to reduce power consumption
• Low operating costs and extended pump life provided by renewable wear rings and Refer to literature PSS-10-6.1
shaft sleeves that restore worn operating clearances at flowse ve.com/library.
INDUSTRIAL PROCESS
MEN and MENBLOC

Reliable, efficient frame-mounted (MEN) and lose-coupled (MENBLOC) general industry pumps for water supply and
treatment, light chemical and general industry applications. Meets European Regulation No. 547/2012.
• High efficien y through a precision-cast, closed impeller with machine shrouds and SPECIFICATIONS
balance holes that also minimize axial thrust Flows to: 800 m3/h (3520 gpm)
• Performance reliability due to an integral, one-piece cast iron bearing frame that Heads to: 140 m (450 ft)
provides excellent rigidity and concentricity to minimize vibration Press. to: 16 bar (230 psi)
• Optimized hydraulics and components meet European Regulation No. 547/2012 Temp: -10°C to 120°C
• Versatility through a wide hydraulic range, multiple configur tions, parts (15°F to 250°F)
IDP® interchangeability and materials options
• Ease of maintenance and inspection resulting from a back pullout design Refer to literature PS-10-2
Worthington at flowse ve.com/library.
PUMPS
INDUSTRIAL PROCESS
ME
OVERHUNG
LINEAR CONTROL
High-capacity, reliable frame-mounted pump for water supply and treatment, light chemical and general industry
applications that need high fl w rates. Meets European Regulation No. 547/2012.
• Optimized for high-capacity performance via one-piece casing with tangential SPECIFICATIONS
discharge Flows to: 3000 m3/h (13 208 gpm)
• High efficien y enabled by a precision-cast, closed impeller with machine shrouds Heads to: 110 m (361 ft)
and balance holes that also minimize axial thrust Press. to: 16 bar (230 psi)
• Low cost of ownership made possible by an open-seal chamber with integral Temp: to 120°C (250°F)
vortex-breaking ribs to extend the mechanical seal life
• Ease of maintenance and inspection resulting from a back pullout design Refer to literature PS-10-2
Flowserve® at flowse ve.com/library.
INDUSTRIAL PROCESS
DS
Versatile end suction pump for mining, water resources, power generation and general industry applications requiring
lower operational and maintenance costs.
• Increased uptime made possible by a mechanically balanced, radial fl w impeller SPECIFICATIONS

that includes balance holes to minimize axial thrust and extend the life of the seal Flows to: 5700 m3/h (25 000 gpm)
• Higher efficien y enabled by a double volute configur tion that greatly reduces Heads to: 110 m (350 ft)
radial forces over single-volute counterparts Press. to: 27 bar (400 psi)
• Flexibility provided by a seal chamber that accommodates a wide choice of Temp: to 120°C (250°F)
sealing arrangements, from packing to mechanical seal types
Worthington • Ease of maintenance and inspection resulting from a back pullout design
INDUSTRIAL PROCESS
ZLN, ZLK and ZLI

Volute-style pumps for use with clear or turbid liquids that are free of solid particles. Available in bare shaft (ZLN),
compact (ZLK) or inline (ZLI) configur tions, all meeting EN 733 and ISO 9908.
• Ease of maintenance assured by design that enables key components of each SPECIFICATIONS
unit to be removed and serviced without disturbing the attached pipe work Flows to: 1800 m3/h (7925 gpm)
• Broad application flexibility enabled by more than 50 sizes plus a wide range of Heads to: 140 m (459 ft)
material and configur tion options Press. to: 16 bar (232 psi)
• Reduced operating cost via low net positive suction head (NPSH), high reliability Temp: to 170°C (338°F)
and high efficien y
SIHI Refer to literature PS-10-40
flowserve.com 19
OVERHUNG
INDUSTRIAL PROCESS
ZTN, ZTK and ZTI

Volute pumps developed specifically for handling mineral and synthetic he t transfer oils, compliant with dimensions and
nominal rating according to EN 733. Choose from bare shaft (ZTN), compact (ZTK) or inline (ZTI) units.
• Ease of maintenance assured by design that enables key components to be removed SPECIFICATIONS
and serviced without removing pump casing from attached pipe work Flows to: 1000 m3/h (4403 gpm)
• Broad application versatility via multiple sizes, materials and configur tions; ZTN Heads to: 95 m (311 ft)
usable in installations with positive or negative suction pressure Press. to: 16 bar (232 psi)
• Lower lifetime cost of ownership from space-saving and easy-to-install compact and Temp: to 350°C (662°F)
inline designs
SIHI at flowse ve.com/library.
INDUSTRIAL PROCESS
ZEN, ZDN, ZHN and ZDI

Volute casing pumps designed to meet the high demands of pumping hot water. Bare shaft (ZHN, ZDN, ZEN) or inline (ZDI)
configur tions available. Dimensions and nominal rating according to EN 733/EN 22858.
• Improved plant and personnel safety assured by a double heat barrier design SPECIFICATIONS
• Increased service life enabled by optimization of the high pressures and temperatures Flows to: 600 m3/h (2642 gpm)
associated with hot water heat carrier systems, as well as the mechanical seal Heads to: 90 m (295 ft)
• Ease of maintenance assured by designs that enable each unit type to be serviced Press. to: 40 bar (580 psi)
without disturbing attached pipe work Temp: to 230°C (446°F)
SIHI Refer to literature EN 733/EN 22858

INDUSTRIAL PROCESS
DBS
Non-clogging, volute-casing pumps designed for pumping dirty liquids or liquids with solids, with design features and
nominal rating to ISO 2858 enlarged sizes.
• High performance, with dirty liquids assured by non-clogging design SPECIFICATIONS

• Ease of maintenance enabled by process design that permits dismantling of complete Flows to: 1200 m3/h (5283 gpm)
bearing unit without disconnecting pump casing from piping Heads to: 100 m (328 ft)
• Broad application flexibility made possible by multiple impeller sh pes — including Press. to: 10 bar (145 psi)
double-channel, triple-channel and free-fl w — plus diverse configur tion, size and Temp: to 110°C (230°F)
material options
SIHI
VALVES | OVERHUNG
PUMPS
INDUSTRIAL PROCESS
SMP
LINEAR CONTROL
Economical and reliable frame-mounted, single-stage, standard motor pump for water supply, water treatment, HVAC
and chiller applications.
• Low operating costs achieved through use of high-efficien y, semi-open or closed SPECIFICATIONS
impellers that are keyed to shaft for positive drive Flows to: 135 m3/h (600 gpm)
• Flexibility and reduced inventory carrying costs due to use of industry-standard Heads to: 70 m (220 ft)
NEMA motors Press. to: 12 bar (175 psi)
• Reliable performance with minimal leakage enabled by a self-aligned mechanical Temp: -40°C to 120°C
seal that is positioned by the impeller and keeps pump fluid way from the motor (-40°F to 250°F)
IDP • Ease of maintenance resulting from a back pullout design that facilitates
inspection and a stub shaft design that allows shaft replacement in the field Refer to literature PS-10-26
INDUSTRIAL PROCESS
F-Line
The F-Line is a family of multistage, overhung pumps with excellent hydraulic efficien y and high suction lift
capability, making them ideal for high-pressure water applications.
• Improved performance via multistage, overhung construction that enables better SPECIFICATIONS
suction performance while simplifying pipe work layout Flows to: 500 m3/h (2200 gpm)
• Ease of maintenance with a back pullout design that facilitates inspection Heads to: 250 m (820 ft)
• Longer service life due to an oversized shaft conservatively designed to minimize Press. to: 25 bar (362 psi)
deflection and reduce wea Temp: to 105°C (220°F)
Flowserve • Application flexibility provided by modular pl tform with numerous available
horizontal and vertical configur tions that permits accurate sizing for operating
conditions and site requirements
Simple and Accurate Pump Selection

Eliminate pump selection and sizing confusion with Affinity™ ortal.
This free web-based tool gives you immediate access to the latest,
most accurate data on Flowserve pumps. Use it to size a pump for
a new application or get performance information for an existing
unit. You can also save selections and generate technical
documents specific for your hydraulic selection Register
today at www.flowse ve.com/affinit .
flowserve.com 21
OVERHUNG
INDUSTRIAL PROCESS
MVE
High-efficien y, reliable mixed-fl w, single-stage volute pump for industrial, municipal and agricultural applications
requiring high suction.
• Low total cost of ownership enabled by multistage, overhung construction that SPECIFICATIONS
enables better suction performance while simplifying pipe work layout at installation Flows to: 2700 m3/h (11 890 gpm)
• Increased reliability due to single-volute, symmetrical casing that features integral Heads to: 15 m (50 ft)
suction and discharge flanges for high strength to resist pipe load Press. to: 7 bar (100 psi)
• Extended seal and bearing life made possible by mixed-fl w, enclosed impeller that is Temp: to 100°C (212°F)
mechanically balanced to prevent vibration
• Ease of maintenance resulting from a back pullout design to facilitate inspection and
TKL™ permit removal without disturbing piping
INDUSTRIAL PROCESS
FRBH
Heavy-duty paper stock pump designed primarily for pulp and paper applications, but also has considerable use in the
chemical processing, mining, water resources, and oil and gas industries.
• High uptime and efficien y ensured by unobstructed suction, large streamlined fl w SPECIFICATIONS
channel, and semi-open impeller with back pump-out vanes, which prevent air Flows to: 9085 m3/h (40 000 gpm)
binding and clogging, even in thick, pulpy mixtures Heads to: 100 m (330 ft)
• Reduced maintenance provided by rigid one-piece bearing frame; ensures positive Press. to: 14 bar (200 psi)
alignment and offers ample access to gland and seal chamber Temp: to 150°C (300°F)
• Reliable, efficient performance with a steep head-c pacity curve, which prevents
Worthington driver overload and minimizes changes in fl w, despite changes in system head Refer to literature PS-10-16
• Low total cost of ownership resulting from high-efficien y, low-maintenance design at flowse ve.com/library.
SOLIDS HANDLING
MPT
Rugged self-priming, solids-handling pump designed to deliver reliable peak performance and low costs to the demanding
water resources and mining industries.
• Longer service life derived from the use of rugged, heavy-duty volute casing SPECIFICATIONS
• Reduced downtime provided by abrasion-resistant, double mechanical seal with Flows to: 600 m3/h (2650 gpm)
silicon carbide faces that prevent contaminants from entering seal chamber Heads to: 35 m (115 ft)
• Increased uptime through the external impeller adjustment via four bushings that Press. to: 5 bar (72 psi)
allow clearances to be accurately reset Temp: to 75°C (165°F)
• Ease of maintenance enabled by back pullout design, which includes a replaceable
Flowserve seal housing that facilitates maintenance without disturbing the piping
VALVES | OVERHUNG
PUMPS
SOLIDS HANDLING
MF and MFV
LINEAR CONTROL
Rugged and efficient solids-handling pump designed specifically for reliabili , low cost and long life in demanding
sewage handling services or where suspended solids are of particular concern.
• Ease of maintenance enabled by the removable gland, which simplifies packing SPECIFICATIONS
adjustment and replacement, plus readily accessible lubrication points Flows to: 600 m3/h (2650 gpm)
• Broad application versatility provided by a wide variety of mechanical seal options Heads to: 90 m (300 ft)
and design of the stuffing box which allows for either grease or water seal Press. to: 19 bar (275 psi)
• Low maintenance costs due to conservative bearing design that eliminates radial Temp: to 63°C (145°F)
and axial play, as well as supports that minimize vibration and ensure rigidity
Worthington
SOLIDS HANDLING
MN and MNV
Rugged, large-capacity, mixed-fl w, solids-handling pump designed specifically for demanding sew ge handling
services or where suspended solids are of particular concern.
• Application versatility provided by a design that includes horizontal and vertical SPECIFICATIONS
models, a variety of nozzle positions, and direct or independent motor mounting Flows to: 45 500 m3/h (200 000 gpm)
• Increased uptime enabled by oversized shaft and reduced overhang, which Heads to: 90 m (300 ft)
minimize shaft deflection and increase packing or seal lif Press. to: 17 bar (240 psi)
• High-efficien y performance enabled by adjustable, double-chrome steel wear Temp: to 63°C (145°F)
rings
• Reduced maintenance with back pullout design, removable gland, replaceable Refer to literature PS-10-4
Worthington shaft sleeves, and readily accessible lubrication points in bearing housing at flowse ve.com/library.
SOLIDS HANDLING
MSX
The MSX solids-handling submersible pump is engineered to perform efficiently in the most challenging environments,
from pumping raw sewage to moving industrial wastewater and solids-laden liquids.
• Low operating costs enabled by EPACT-rated motor and high-efficien y SPECIFICATIONS

hydraulics that reduce energy consumption while providing predictable pumping Flows to: 4545 m3/h (20 000 gpm)
performance Heads to: 90 m (300 ft)
• Reliability with spike-resistant windings that provide smooth, consistent motor Press. to: 11 bar (160 psi)
performance and the ability to handle voltage spikes Temp: to 40°C (104°F)
• Increased uptime via dynamically balanced shaft and rotor for reduced vibration
and smooth operation Refer to literature PS-50-2-E
IDP • Long service life provided by watertight cable entry that protects motor from at flowse ve.com/library.
moisture and contamination
flowserve.com 23
OVERHUNG
SLURRY
M
Hard-metal slurry pump designed to handle high concentrations of coarse, abrasive solids in suspension. Well-suited for
the harshest applications in mining, mineral processing and metal production.
• Long service life and outstanding abrasion and corrosion resistance provided by high- SPECIFICATIONS
chrome iron casing with tangential discharge Flows to: 10 000 m3/h (44 000 gpm)
• Increased uptime provided by closed impeller with external pumping vanes, which Heads to: 90 m (300 ft)
extend seal life by reducing stuffing box pressure and suction recircul tion Press. to: 10 bar (150 psi)
• Reliable performance with minimal maintenance facilitated by three-point external Temp: to 120°C (250°F)
end-clearance adjustment that restores impeller clearance to optimize efficien y
Worthington without shims Refer to literature PS-10-19
• Reduced inventory costs due to interchangeability among the configur tions at flowse ve.com/library.
SLURRY
R
Rubber-lined slurry pump engineered to handle high concentrations of fine abrasive solids in suspension or corrosive
abrasive mixtures often found in the mining and metal processing industries.
• Long service life provided by abrasion- and corrosion-resistant rubber casing liners, SPECIFICATIONS
which are available in multiple materials to suit application requirements Flows to: 10 000 m3/h (44 000 gpm)
• Ease of maintenance facilitated by radially split casing, which provides easy access to Heads to: 50 m (160 ft)
liners and ample stuffing box acces Press. to: 10 bar (150 psi)
• Broad application versatility due to multiple configur tions, choice of materials, parts Temp: to 110°C (225°F)
interchangeability and several shaft sealing options
Worthington • Increased uptime and reduced maintenance costs enabled by the closed impeller with
pump-out vanes to reduce stuffing box pressure and suction recircul tion at flowse ve.com/library.
SLURRY
Titan-Slurry
The Titan Slurry is a single-stage pump with a tangential discharge engineered to handle high concentrations of coarse,
abrasive solids in suspension. Its unique dual case design uses either a hard metal or elastomeric liner.
• Broad application versatility and maximum wear resistance enabled by use of SPECIFICATIONS
replaceable and interchangeable hard metal or elastomeric casing liners Flows to: 3600 m3/h (16 000 gpm)
• Reduced maintenance and low total cost of ownership made possible by unique Heads to: 90 m (300 ft)
radially split dual-casing design, which eases liner inspection and replacement Press. to: 40 bar (580 psi)
• Reduced energy costs provided by high-efficien y, closed-vane impeller with Temp: to 110°C (230°F)
adjustable face clearance and generous wear allowance
TKL Refer to literature PS-10-8
• Increased uptime due to extra-thick wear allowances plus oversized shafts and
bearings at flowse ve.com/library.
VALVES | OVERHUNG
PUMPS
SLURRY
LC
LINEAR CONTROL
The LC pump is engineered to withstand high concentrations of abrasive and corrosive solutions, like those found in
phosphoric and derived industries as well as mining and mineral processing.
• Extended service life due to thick-walled concentric casing with tangential SPECIFICATIONS
discharge that is radially balanced and free from cavities and obstructions to Flows to: 8000 m3/h (35 200 gpm)
minimize wear Heads to: 90 m (300 ft)
• Increased mean time between repair enabled by impeller counter vanes that limit Press. to: 25 bar (360 psi)
internal recirculation and reduce seal pressure to promote longer seal life Temp: to 140°C (285°F)
• Simplified maintenance with removable one-piece bearing fram
Flowserve • Broad application versatility made possible by numerous shaft sealing, impeller Refer to literature PS-10-11
and configur tion options to meet application and installation requirements at flowse ve.com/library.
API PROCESS
HPX
Fully compliant with ISO 13709/API 610 (OH2) design criteria, the HPX pump is the workhorse of the oil and gas and
hydrocarbon processing industries, boasting unequaled versatility, reliability and safety.
• Lower operating costs due to comprehensive hydraulic coverage and numerous SPECIFICATIONS
specialty configur tions that permit precise selection for best operating efficien y Flows to: 2000 m3/h (8800 gpm)
• Longer service life enabled by centerline-supported casing that withstands nozzle Heads to: 350 m (1100 ft)
loads beyond ISO 13709/API 610 requirements and minimizes shaft misalignment, Press. to: 80 bar (1160 psi)
thereby extending rotor, bearing and seal life Temp: -160°C to 450°C
• Stringent emissions containment with ISO 21049/API 682 seal chamber
IDP (-250°F to 842°F)
• Easier maintenance thanks to back pullout design, enabling service without
disturbing motor or casing connections Refer to literature PS-10-5
API PROCESS
PHL
Fully compliant with ISO 13709/API 610 (OH2), the PHL’s innovative multi-channel diffuser technology allows the
hydraulics to be custom-tuned to ensure best efficien y hydraulic fits while maximizing parts interchangeabilit .
• Broad application flexibility from innov tive multi-channel diffuser technology, SPECIFICATIONS
which supports more than 170 hydraulic configur tions and easily accommodates Flows to: 900 m3/h (3963 gpm)
changing operating parameters Heads to: 400 m (1312 ft)
• Improved pump efficien y via diffuser tuning, which widens operational fl w Press. to: 40 bar (600 psi)
window and minimizes radial loads at any fl w Temp: to 450°C (842°F)
• Extremely low total cost of ownership thanks to long MTBF, low seal emission,
Flowserve long mechanical seal life, low energy consumption and low NPSH Refer to literature PSS-10-5.2
• Improved plant and personnel safety enabled by low vibration and noise levels at flowse ve.com/library.
flowserve.com 25
OVERHUNG
API PROCESS
ERPN
The pump of choice for severe chemical, petrochemical, refining and he vy-duty industrial service, closely following
ISO 13709/API 610 (OH2), latest edition requirements.
• Greater service life enabled by centerline-supported pump casing that accommodates SPECIFICATIONS
nozzle loads in accordance with ISO 13709/API 610 requirements, minimizing shaft Flows to: 1100 m3/h (4800 gpm)
misalignment and extending rotor, bearing and seal life Heads to: 230 m (755 ft)
• Emissions containment with ISO 21049/API 682 seal chamber, which accepts all seal Press. to: 60 bar (870 psi)
types, including dual-pressurized and unpressurized cartridge units Temp: -50°C to 350°C
• Simplified maintenance and inspection made possible by back pullout desig (-158°F to 660°F)
• Mechanical and hydraulic design flexibility supported by a variety of configu tions
Worthington Refer to literature PS-10-20
API PROCESS
PVXM
Compliant with ISO 13709/API 610 (OH3), the PVXM vertical in-line pump is a space-saving alternative to horizontal
overhung process pumps in upstream and downstream services.
• Extra-low energy consumption resulting from precision-machined and interchangeable SPECIFICATIONS

diffuser channels, which are customized to the hydraulic best efficien y point Flows to: 500 m3/h (2200 gpm)
• Greater durability from robust design that meets pressure, temperature, nozzle loading Heads to: 275 m (900 ft)
and safety considerations of ISO 13709/API 610 and other specific tions Press. to: 40 bar (600 psi)
• High uptime enabled by stiff rotor design, guaranteeing 20% lower vibration levels Temp: -100°C to 250°C
than required by ISO 13709/API 610 (-148°F to 480°F)
Flowserve • Emissions containment with ISO 21049/API 682 seal chamber, which accepts dual-
pressurized and unpressurized cartridge seals plus barrier seal technology Refer to literature PS-10-29
API PROCESS
HWMA
With its small footprint, this low-fl w, high-head process pump is a space-saving alternative to many overhung process
pumps. Compliant with ISO 13709/API 610 (OH3), latest edition. Two-stage configur tion HWMA2 available.
• Lower total cost of ownership from optimized hydraulic performance, reduced power SPECIFICATIONS
consumption and low-fl w stability Flows to: 45 m3/h (200 gpm)
• Broad application versatility and low energy costs enabled by modular design that Heads to: 440 m (1445 ft)
offers more than 80 best efficien y point fits in a single pump size Press. to: 64 bar (930 psi)
• Precise, repeatable hydraulic performance delivered by replaceable volute insert and Temp: -46°C to 260°C
Barske-type impeller that provides a continuously rising performance curve with (-51°F to 500°F)
exceptional low-fl w stability
IDP • Easy maintenance with large openings on the heavy-duty motor support head Refer to literature PS-10-23
VALVES | OVERHUNG
PUMPS
API PROCESS
PVML
LINEAR CONTROL
Compliant with ISO 13709/API 610 (OH5) and BS 4082R, the PVML vertical in-line pump is ideal for upstream and
downstream applications where precision hydraulics are required but floor space is limited
• Lower total cost of ownership from customized hydraulics that generate low SPECIFICATIONS
vibration levels, high efficiencies and nea -zero seal emissions Flows to: 500 m3/h (2220 gpm)
• Performance flexibility provided by milled and interchangeable diffuser channels Heads to: 275 m (900 ft)
which are customized for specific duty points enabling customers to address Press. to: 40 bar (580 psi)
changing operating parameters Temp: -100°C to 250°C
• Ease of maintenance enabled by direct-drive design, which does not require (-148°F to 480°F)
alignment, and cartridge seal mounting, which assures precise seal face setting
Flowserve Refer to literature PS-10-28
API PROCESS
MSP
Closely following ISO 13709/API 610 (OH4) and featuring a medium-speed induction motor, the MSP delivers peak
efficien y, excellent economy, simplified install tion and reduced maintenance in low-fl w, high-head applications.
• Reduced energy costs achieved with variable frequency drive that delivers SPECIFICATIONS
consistent BEP performance over a wide operating range, without throttling Flows to: 34 m3/h (150 gpm)
• Efficient l w specific speed hydraulics for l w fl ws at high heads provided by Heads to: 900 m (2955 ft)
modified concentric volute and impeller with balance hole Press. to: 64 bar (930 psi)
• Fast maintenance with rigid coupling design that provides precision shaft Temp: -46°C to 250°C
alignment while eliminating time-consuming manual alignment (-51°F to 482°F)
• Easy pump installation and mechanical seal access facilitated by vertical
Flowserve in-line design Refer to literature PS-10-1
API PROCESS
HWX
Fully compliant with API 610 (OH3), this vertical, in-line pump offers a space-saving alternative for many overhung
process pumps in low-temperature, high-temperature and high working pressure services.
• Robust construction to meet pressure, temperature, nozzle loading and safety SPECIFICATIONS
considerations of ISO 13709/API 610 and other specific tions Flows to: 1300 m3/h (5725 gpm)
• Extensive hydraulic coverage by a family of 11 distinct designs, providing a Heads to: 370 m (1215 ft)
comprehensive range of pump configur tions to meet application requirements Press. to: 42 bar (610 psi)
• Stringent emissions containment with ISO 21049/API 682 seal chamber, which Temp: -46°C to 400°C
accommodates dual-pressurized and unpressurized cartridge seals (-51°F to 750°F)
flowserve.com 27
OVERHUNG
API PROCESS
HPX6000 and HPXM6000

HPX6000 and HPXM6000 (low-fl w) are fully lined slurry pumps built to ISO 13709/API 610 (OH2) and used in
heavy oil processing. They reliably handle hot, abrasive solids without the danger of pump casing erosion.
• Low life cycle cost provided by replaceable mechanically fastened liners that protect SPECIFICATIONS
the pressure casing from erosion and abrasion Flows to: 3409 m3/h (15 000 gpm)
• Process flexibility made possible by interchangeable diffuse , casing liner and impeller, Heads to: 244 m (800 ft)
which allow operators to adapt performance to changing process conditions Press. to: 83 bar (1200 psi)
• Extended operating life ensured by a rigid, oversized bearing frame that maintains Temp: -20°C to 400°C
Lawrence Pumps shaft deflection bel w ISO/API requirements (-30°F to 826°F)
• Casing liners are available in multiple abrasion-resistant materials and surface
treatments to meet any process or operational requirement Refer to literature PS-10-33
AXIAL FLOW
AFH9000
Axial fl w elbow pump ideal for low-pressure, high-volume transfer applications, such as those frequently found in
chemical and hydrocarbon processing. Typical applications include evaporators, crystallizers and heat recovery.
• Reduced downtime derived from use of large-diameter cantilevered shafts that SPECIFICATIONS
eliminate need for internal support bearings and minimize deflection t seal chamber Flows to: 34 065 m3/h (150 000 gpm)
• Ease of maintenance enabled by back pullout design, which simplifies inspection and Heads to: 11 m (36 ft)
maintenance of the roter without disturbing piping or motor connections Press. to: 10.3 bar (150 psi)
• Increased uptime derived from one-piece, 360° bearing frame with deep metal-to- Temp: -20°C to 149°C
Lawrence Pumps metal fit th t provides superior alignment compared to 180° designs (-30°F to 300°F)
PUMPS
VALVES | OVERHUNG
LINEAR CONTROL
29
flowserve.com
WIKO
30
PUMPS | BETWEEN BEARINGS
BETWEEN BEARINGS
Long life and high efficiency performance in the world’s most critical services characterize
this highly engineered range of pumps. Capable of reaching massive flow rates and
pressures, single- and double-case designs are designed for continuous operation, often
un-spared. Extended uptime is achieved through rugged rotor designs that carefully
account for mechanical and hydraulic balance. Energy savings realized from a huge range
of hydraulic options keep operating costs in check.
Between Bearings – Quick Reference*

Single-Case – 2000 m3/h 170 m 21 bar -20°C to 150°C

LR Axially Split (8800 gpm) (560 ft) (300 psi) (-4°F to 300°F)
Single-Case – 30 000 m3/h 300 m 40 bar -20°C to 140°C

LNN Axially Split (132 000 gpm) (985 ft) (580 psi) (-4°F to 285°F)
DVSH
LPN
Single-Case –
Axially Split – API
Single-Case –
Axially Split – API
FPO
12 000 m3/h
(52 835 gpm)
15 000 m3/h
(65 000 gpm)
565 m
(1854 ft)
250 m
(820 ft)
150 bar
(2175 psi)
50 bar
(725 psi)
to 200°C
(400°F)
-80°C to 204°C
(-110°F to 400°F)
Single-Case – 2950 m3/h 685 m 64 bar to 200°C

UZDL Axially Split – API (13 000 gpm) (2250 ft) (910 psi) (400°F)
Single-Case – 2340 m3/h 650 m 88 bar -30°C to 150°C

EC Axially Split – Multistage (10 300 gpm) (2130 ft) (1300 psi) (-20°F to 300°F)
flowserve.com 31
Between Bearings – Quick Reference, cont’d.

DMX Axially Split – Multistage (24 750 gpm) (8600 ft) (4000 psi) (400°F)

HDX Radially Split (22 000 gpm) (1500 ft) (1450 psi) (842°F)

DVSR Radially Split (29 000 gpm) (1080 ft) (3750 psi) (400°F)

HED and HED-DS Radially Split (8800 gpm) (1500 ft) (1450 psi) (842°F)

WTB Radially Split (6165 gpm) (3610 ft) (1565 psi) (800°F)
Horizontal – Multistage 145 m3/h 390 m 40 bar to 194°C

HEGA Single-Case (638 gpm) (1279 ft) (580 psi) (380°F)

UEA Single-Case (969 gpm) (918 ft) (290 psi) (284°F)

TKH Single-Case (1541 gpm) (607 ft) (232 psi) (248°F)

WD and WDX Single-Case (800 gpm) (2625 ft) (1090 psi) (410°F)
Horizontal – Multistage 300 m3/h 1200 m 150 bar -50°C to 200°C

WX Single-Case (1320 gpm) (3940 ft) (2175 psi) (-58°F to 400°F)
Horizontal – Multistage 1200 m3/h 900 m 100 bar

CSX Single-Case (5300 gpm) (2950 ft) (1450 psi)
—

WXH and WXM Single-Case (4500 gpm) (9000 ft) (4500 psi) (480°F)
MSL, MSM, Horizontal – Multistage 450 m3/h 1600 m 160 bar -10°C to 180°C
MSC, MSH Single-Case (1981 gpm) (5249 ft) (2320 psi) (14°F to 356°F)
Horizontal – Multistage 3000 m3/h 500 m 60 bar -10°C to 140°C

NM Single-Case (13 210 gpm) (1640 ft) (870 psi) (14°F to 285°F)

WXB and WXB-B Double-Case (1320 gpm) (5116 ft) (2900 psi) (800°F)

CSB Double-Case (4500 gpm) (12 000 ft) (6190 psi) (480°F)

CHTA Double-Case (17 170 gpm) (14 750 ft) (7800 psi) (480°F)

HDB and HSB Double-Case (17 610 gpm) (14 000 ft) (6525 psi) (800°F)

BP Double-Case (4620 gpm) (11 480 ft) (4260 psi) (800°F)

WCC Double-Case (4400 gpm) (9200 ft) (4000 psi) (800°F)

HDO and HSO Double-Case (17 610 gpm) (16 000 ft) (6525 psi) (800°F)

WIK and WIKO Double-Case (7000 gpm) (23 000 ft) (14 500 psi) (800°F)
flowserve.com 33
BETWEEN BEARINGS
S I N G L E - C A S E – A X I A L LY S P L I T
LR
Heavy-duty, single-stage pump engineered to provide reliable, efficient performance in a wide range of pplications across
numerous industries. Two-stage (LLR) and vertical in-line (LRV) configur tions available.
• High efficien y and optimum performance over a wide fl w range due to low-NPSH SPECIFICATIONS
enclosed impeller and casing wear rings that easily restore operating clearances Flows to: 2000 m3/h (8800 gpm)
• Application versatility provided by numerous options that permit the pump to be Heads to: 170 m (560 ft)
precisely configured for se vice requirements Press. to: 21 bar (300 psi)
• Low inventory carrying costs made possible by parts interchangeability among sizes Temp: -20°C to 150°C (-4°F to 300°F)
and configur tions
Worthington • Ease of maintenance resulting from axial split-case design, which allows access to Refer to literature PS-20-3
rotating element without disturbing the piping or driver at flowse ve.com/library.
S I N G L E - C A S E – A X I A L LY S P L I T
LNN
The LNN boasts a broad hydraulic range with more than 200 impeller and volute combinations, resulting in quiet operation,
low NPSH requirements, and high efficien y operation in all water applications.
• Optimal hydraulic balance and efficien y over its full operating range provided by SPECIFICATIONS
double suction impeller operating in a double volute, axially split casing Flows to: 30 000 m3/h (132 000 gpm)
• Low inventory carrying cost provided by a high degree of parts interchangeability Heads to: 300 m (985 ft)
among sizes and configur tions Press. to: 40 bar (580 psi)
• Application flexibility enabled by ability to modify pump performance to meet future Temp: -20°C to 140°C (-4°F to 285°F)
service conditions by changing impeller designs
Worthington • Increased uptime from double-volute design, ample shaft and 360° bearing housings,
all of which minimize shaft deflection and vibr tion to extend bearing and seal life at flowse ve.com/library.
S I N G L E - C A S E – A X I A L LY S P L I T – A P I
DVSH
Fully compliant with ISO 13709/API 610 (BB1), this heavy-duty, single-stage pump with side/side nozzles is well-suited for
process charge, transfer and pipeline services where uncompromising reliability over a wide fl w range is paramount.
• Low operating costs derived from comprehensive hydraulic coverage (more than 100 SPECIFICATIONS
sizes), thereby permitting precise selection for best hydraulic fit and efficie y Flows to: 12 000 m3/h (52 835 gpm)
• High uptime made possible by double suction impeller and double volute designs, Heads to: 565 m (1854 ft)
which create optimal axial and radial thrust balance Press. to: 150 bar (2175 psi)
• Increased reliability provided by the heavy-duty shaft design, which ensures trouble- Temp: to 200°C (400°F)
free operation below the first critical spee
• Ease of maintenance due to suction and discharge nozzles that are integrally cast in Refer to literature PS-20-2
Flowserve lower casing half, permitting disassembly without disturbing piping at flowse ve.com/library.
VALVES | BETWEEN
PUMPS
LPN
LINEAR CONTROL
With a double suction impeller and side-side nozzles, this medium-pressure pump is a natural solution for low NPSH
applications, such as water and hydrocarbon transfer service. Designed to ISO 13709/API 610 (BB1) criteria.
• High uptime made possible by double-suction impeller and double volute designs, SPECIFICATIONS
which create optimal axial and radial thrust balance Flows to: 15 000 m3/h (65 000 gpm)
• Increased MTBR resulting from heavy-duty bearings and bearing lubrication Heads to: 250 m (820 ft)
BEARINGS
system; multiple options available to suit application requirements Press. to: 50 bar (725 psi)
• Superior performance at elevated temperatures with near-centerline mounting Temp: -80°C to 204°C
Worthington • Simplified maintenance enabled by the split-casing design which permits the (-110°F to 400°F)
rotor, seals and bearings to be serviced without disturbing the piping
• Emissions control with ISO 21049/API 682 seal chambers Refer to literature PS-20-5
UZDL
A two-stage pump with a double suction, first-st ge impeller, the UZDL is designed for water pipelines, transfer
services, firefighting and high-pressure dutie ISO 13709/API 610 (BB1) compliant models available.
• Increased uptime made possible by double volute design that minimizes hydraulic SPECIFICATIONS
radial loads, and virtually eliminates shaft deflection and vibr tion Flows to: 2950 m3/h (13 000 gpm)
• Safety and environmental compliance with ISO 21049/API 682 seal chambers Heads to: 685 m (2250 ft)
• Increased reliability provided by stiff shaft design, which ensures trouble-free Press. to: 64 bar (910 psi)
operation below the first critical spee Temp: to 200°C (400°F)
• Ease of maintenance due to suction and discharge nozzles that are integrally cast
Worthington Refer to literature PS-30-2
in lower casing half, permitting disassembly without disturbing piping
Partnerships With Long-Term Value

Flowserve enterprise framework agreement (EFA) partners have access
to all facets of our business, from front-end engineering to research
and development to solve real-world problems. It’s a total lifecycle
management approach that applies to day-to-day operational
challenges as well as plant expansions and greenfield
projects — and it pays. One EFA partner has garnered more
than $400 million in value in the first five year
flowserve.com 35
BETWEEN BEARINGS
S I N G L E - C A S E – A X I A L LY S P L I T – M U LT I S T A G E
EC
This multistage, horizontal split-case pump is designed to support large fl w and high head applications in mining and
water transmission.
• Lower maintenance time and costs enabled by horizontally split casing and removable SPECIFICATIONS
pump rotor, which allow access without disturbing suction and discharge connections Flows to: 2340 m3/h (10 300 gpm)
or motor alignment Heads to: 650 m (2130 ft)
• Installation ease via pump design that can be mounted horizontally or vertically Press. to: 88 bar (1300 psi)
• Longer service life from shaft sleeves that reduce friction wear and graphite- Temp: -30°C to 150°C
impregnated packing, which provides easy leakage adjustment (-20°F to 300°F)
TKL
S I N G L E - C A S E – A X I A L LY S P L I T – M U LT I S T A G E
DMX
With more than 10 000 units supplied, this highly reliable pump is ideal for high-fl w, high-pressure applications across
the gamut of industries, including oil and gas, chemical and desalination. Designed to ISO 13709/API 610 (BB3) criteria.
• Increased uptime enabled by opposed mounted impellers operating in a double volute SPECIFICATIONS
casing, which provide inherent hydraulic balance over the full operating range Flows to: 5621 m3/h (24 750 gpm)
• Broad application versatility provided by numerous options that permit the pump to be Heads to: 2620 m (8600 ft)
precisely configured for se vice requirements Press. to: 275 bar (4000 psi)
• Superior performance at elevated temperatures with near-centerline mounting Temp: to 204°C (400°F)
Flowserve • Ease of maintenance facilitated by cap nuts on top half casing parting flang
• Emissions control with ISO 21049/API 682 seal chambers Refer to literature PS-30-3
S I N G L E - C A S E – R A D I A L LY S P L I T
HDX
In full compliance with ISO 13709/API 610 (BB2) standards, the HDX centerline mounted pump with single- stage, double-
suction impeller and double volute casing with top nozzles is engineered for heavy process services.
• Increased uptime enabled by double suction impeller that minimizes thrust problems, SPECIFICATIONS
reduces NPSHR, and allows mechanical seals to operate at equal and low pressure Flows to: 5000 m3/h (22 000 gpm)
• Excellent high-temperature performance provided by centerline mounting plus Heads to: 450 m (1500 ft)
gasketing with metal-to-metal fit to ensure proper sealing and alignment Press. to: 100 bar (1450 psi)
• Installation ease with top-top, side-top and side-side nozzle configur tions available to Temp: to 450°C (842°F)
IDP meet any customer piping layout
• Safety and environmental compliance with ISO 21049/API 682 seal chambers Refer to literature PS-20-4
• Power recovery turbine configur tion (HDX-TT) available at flowse ve.com/library.
VALVES | BETWEEN
PUMPS
DVSR
LINEAR CONTROL
Compliant with ISO 13709/API 610 (BB2), the radially split design of the DVSR makes it ideal for applications at very
high pressures or low specific gr vity, such as liquefied gases including CO2.
• Maximum efficien y through a double-suction impeller that provides axial SPECIFICATIONS

hydraulic thrust balance Flows to: 6585 m3/h (29 000 gpm)
• Higher uptime due to a double-volute design that minimizes hydraulic loads, even Heads to: 330 m (1080 ft)
BEARINGS
at minimal fl w, to prolong the life of bearings, seals and wear rings Press. to: 260 bar (3750 psi)
• Stringent emissions control with ISO 21049/API 682 seal chambers Temp: to 204°C (400°F)
• Trouble-free operation below the first critical speed ensured by the he vy-duty
shaft design Refer to literature PS-30-17
Byron Jackson • API performance testing is conducted on each pump prior to shipment at flowse ve.com/library.
HED and HED-DS

Two-stage, centerline mounted pump engineered for safe, reliable operation in heavy-duty process services and
elevated temperatures. Fully compliant with ISO 13709/API 610 (BB2).
• Extended reliability and life made possible by heavy-duty, single- or dual-volute SPECIFICATIONS
casings with a staggered arrangement, which ensures radial balance Flows to: 2000 m3/h (8800 gpm)
• Application versatility provided by numerous options — including 50- or 60-cycle Heads to: 650 m (2100 ft)
operation and top-top, side-top and side-side nozzle orientations — that permit Press. to: 120 bar (1750 psi)
the pump to be precisely configured for se vice and site requirements Temp: to 450°C (842°F)
• Increased reliability provided by stiff shaft design, which ensures trouble-free
Pacifi ® operation below the first critical spee
• Environmental regulatory compliance with ISO 21049/API 682 seal chambers at flowse ve.com/library.
WTB
With hydraulics between typical BB2 and BB5 pumps, the WTB is a reliable solution for niche high-temperature and
high-pressure applications in refineries chemical operations and power plants. Made in two- and three-stage designs.
• Reliable operation ensured by compliance with all key ISO 13709/API 610 SPECIFICATIONS
requirements (two-stage unit is fully compliant) Flows to: 1400 m3/h (6165 gpm)
• Stable performance with radial hydraulic balance over the pump’s full operating Heads to: 1100 m (3610 ft)
range ensured by heavy-duty, dual-volute casing with integral crossover Press. to: 108 bar (1565 psi)
• Excellent high-temperature and pressure performance enabled by centerline- Temp: to 430°C (800°F)
supported, radially split design that prevents distortion
Worthington • Reduced operating costs provided by the double-suction, first-st ge impeller,
which significantly reduces NPSHR often eliminating the need for booster units
flowserve.com 37
BETWEEN BEARINGS
H O R I Z O N T A L – M U LT I S T A G E – S I N G L E - C A S E
HEGA
Cost-effective ring-section pumps with closed impellers, designed for power, water and wastewater, pharmaceutical and
chemical applications requiring trouble-free pumping of clear or slightly dirty liquids.
• Reduced energy costs achieved by sizing impellers for best hydraulic fit and SPECIFICATIONS
operating efficien y Flows to: 145 m3/h (638 gpm)
• Low installation costs enabled by movable suction head casing, which easily Heads to: 390 m (1279 ft)
adapts flange position to site condition Press. to: 40 bar (580 psi)
• Low inventory carrying costs enabled by high degree of parts interchangeability Temp: to 194°C (380°F)
SIHI • Reliable bearing performance provided by grease lubricated deep groove and
cylindrical roller bearing, respectively meeting DIN 625 and DIN 5412
• Shaft sealing by a stuffing box or mechanical seal to suit pplication requirements
UEA
Horizontal, self-priming multistage ring-section pump designed for pumping liquids at their boiling point. It is particularly
well suited for condensates, liquefied gases refrigerants, LPG and boiler feedwater.
• Safe, reliable pumping of boiling liquids ensured by a special priming stage that SPECIFICATIONS
absorbs vapor from the suction side Flows to: 220 m3/h (969 gpm)
• Trouble-free operation under unfavorable suction conditions enabled by axial inlet Heads to: 280 m (918 ft)
with NPSH inducer stage Press. to: 20 bar (290 psi)
• Wide application range resulting from its ability to handle liquids at their boiling points Temp: to 140°C (284°F)
as well as its low required NPSH
SIHI • Shaft sealing by a single- or double-mechanical seal to suit application requirements
TKH
Horizontal, self-priming and segmental-type centrifugal pumps with shrouded impellers for water and utility water supply,
fuel handling, and chemical and petrochemical applications.
• Reduced downtime resulting from the separation of gas before entering the first SPECIFICATIONS
impeller Flows to: 350 m3/h (1541 gpm)
• Maximum performance via a priming stage that runs in parallel with the first liquid Heads to: 185 m (607 ft)
stage and operates according to the mixed media separation principle Press. to: 16 bar (232 psi)
• Wide range of applications due to the self-priming capability and multitude of material Temp: to 120°C (248°F)
combinations, including shipbuilding and the construction of cooling and firefightin
SIHI equipment
VALVES | BETWEEN
PUMPS
WD and WDX
LINEAR CONTROL
These radially split, high-pressure, multistage, ring section pumps are designed for a wide range of process and
industrial applications.
• Optimized performance without loss of head or risk of cavitation due to low SPECIFICATIONS
NPSHR suction impeller and fully machined diffusers Flows to: 190 m3/h (800 gpm)
• Reliable operation at a range of duty points due to suction, discharge and stage Heads to: 700 m (2625 ft)
BEARINGS
casings that are sealed with O-rings and engineered to contain the pressures Press. to: 75 bar (1090 psi)
IDP generated by the pump at the various design pressures and temperatures Temp: to 210°C (410°F)
• Broad application flexibility enabled by modular construction featuring identical
stages stacked axially to achieve the desired pressure output
WX
A radially split, centerline mounted ring section pump, the WX is available in various API 610 material combinations
to suit application needs. It provides reliable, efficient performance with total life ycle cost economy.
• Greater hydraulic performance made possible by separate cast diffusers and SPECIFICATIONS
channel rings, investment cast for optimum efficien y and repeatability Flows to: 300 m3/h (1320 gpm)
• Stable high-temperature operation with proper alignment due to centerline Heads to: 1200 m (3940 ft)
mounted, self-venting casing, which resists distortion from thermal expansion Press. to: 150 bar (2175 psi)
Worthington • Improved efficien y at all operating conditions from balanced axial thrust loads Temp: -50°C to 200°C (-58°F to 400°F)
enabled by a unique balance drum
CSX
The CSX represents the next generation of segmental ring, diffuser-style pumps. Particularly well-suited for reverse
osmosis desalination systems, it provides long-term, high-efficien y operation with low lifecycle costs.
• Low energy consumption ensured by advanced hydraulic, precision-cast diffusers SPECIFICATIONS

and channel rings, high-efficien y impellers and renewable case wear rings Flows to: 1200 m3/h (5300 gpm)
• Prolonged operating life made possible by corrosion-resistant materials of Heads to: 900 m (2950 ft)
construction (including proprietary Alloy 885) for wetted components Press. to: 100 bar (1450 psi)
• Easy installation due to symmetrical suction and discharge heads that enable the
pump nozzles to be rotated and positioned to suit a variety of piping layouts Refer to literature PS-30-15
IDP at flowse ve.com/library.
flowserve.com 39
BETWEEN BEARINGS
WXH and WXM

These high- (WXH) and medium-pressure (WXM), utility-grade, ring section pumps are particularly well-suited for
feedwater on industrial boilers from small to large sizes and in combined cycle where severe cycling is common.
• Greater reliability from radially split pressure casings, ensuring overall pump SPECIFICATIONS
concentricity and rotor alignment Flows to: 1000 m3/h (4500 gpm)
• Improved service life and tolerance to changing conditions due to precision-cast Heads to: 2750 m (9000 ft)
diffusers that equalize radial loads and increase bearing, wear ring and seal life Press. to: 310 bar (4500 psi)
• Decreased maintenance costs and longer service intervals enabled by heavy-duty rotor
IDP Temp: to 250°C (480°F)
with short bearing spans, which minimizes deflection
• Precise hydraulic configur tion made possible by the modular segmental ring diffuser Refer to literature PS-30-1
design plus numerous options at flowse ve.com/library.
MSL, MSM, MSC and MSH

Next-generation, multistage, ring section pumps designed to provide the highest efficien y, long-term reliability and easy
operation. Meet the technical requirements of ISO 5199/EN 25199.
• Broad application flexibility facilit ted by advanced modular design that allows SPECIFICATIONS
different hydraulic impeller and diffuser sizes to be installed in a standardized casing, Flows to: 450 m3/h (1981 gpm)
enabling the pump to be configured for the exact working point require Heads to: 1600 m (5249 ft)
• Low inventory carrying costs made possible by a design that maximizes Press. to: 160 bar (2320 psi)
interchangeability while reducing the total number of parts needed Temp: -10°C to 180°C (14°F to 356°F)
SIHI • Ease of installation via discharge casing flange which can be supplied radially upward,
horizontal-left or horizontal-right to suit site conditions Refer to literature PS-30-22
NM
The NM radially split, multistage, ring section pump is designed for a wide range of applications in the water, power and
general industries.
• Reliable performance from low NPSH suction volute design SPECIFICATIONS

• Increased efficien y made possible by machined impeller shrouds Flows to: 3000 m3/h (13 210 gpm)
• Greater bearing and seal life due to stable operation from impeller balance holes Heads to: 500 m (1640 ft)
(minimizing axial thrust) and shrouded diffusers with return guide vanes (minimizing Press. to: 60 bar (870 psi)
IDP radial thrust) Temp: -10°C to 140°C (14°F to 285°F)
• Broad application versatility enabled by flexible design suitable for cooling water
(power), fire protection flood control boiler feed, water supply and distribution (water),
agriculture, ground water development and irrigation
The Business of Asset Performance
Flowserve is committed to helping customers realize more payback
from their operations. Our reliability and performance engineers can
help implement a range of asset management and optimization
solutions — asset performance, equipment optimization,
performance trend analysis and physical assessments —
aimed at identifying lifecycle cost savings opportunities. The
result is a self-financing road m p to improved operational
performance.
H O R I Z O N T A L – M U LT I S T A G E – D O U B L E - C A S E
WXB and WXB-B

Based on ISO 13709/API 610 design requirements, this diffuser-casing barrel pump is the first choice for demanding
applications in refineries chemical and petrochemical plants, liquefied gas st tions and boiler feed service.
• Space-saving design with minimal maintenance downtime due to compact and SPECIFICATIONS
convenient cartridge-style construction Flows to: 300 m3/h (1320 gpm)
• Longer service life via a generous shaft diameter that results in low shaft Heads to: 1560 m (5116 ft)
deflection to increase bearing mechanical seal and wear ring life Press. to: 200 bar (2900 psi)
Worthington • Lower maintenance costs resulting from renewable wear rings on all casings and Temp: to 425°C (800°F)
impellers to permit economical restoration of running clearances
• Emissions control with ISO 21049/API 682 seal chambers Refer to literature PS-30-6 and
• Low-fl w, high head stability with Barske-style impeller (WXB-B) PSS-30-6.1 at flowse ve.com/library.
CSB
Cost-effective, diffuser-style barrel pump for boiler feed service in combined cycle and conventional steam plants.
Built to ASME Section VIII, it delivers exceptionally smooth pumping in a compact, space-saving design.
• Energy efficien y and operation stability provided by a continuous crossover SPECIFICATIONS

diffuser that precisely converts velocity to pressure Flows to: 1000 m3/h (4500 gpm)
• Ease of maintenance resulting from a radially split, inner case sub-assembly that Heads to: 3650 m (12 000 ft)
facilitates inspection and maintenance in the fiel Press. to: 427 bar (6190 psi)
• Longer service life due to a high shaft diameter-to-bearing span ratio that results Temp: to 250°C (480°F)
in low shaft deflection to increase bearing mechanical seal and wear ring life
IDP Refer to literature PS-30-12
• Durability via forged barrel made from homogeneous, high-strength chromium
steel for high-pressure performance and erosion-corrosion resistance at flowse ve.com/library.
flowserve.com 41
BETWEEN BEARINGS
CHTA
Exceptionally reliable utility grade barrel pump for the most demanding high-energy applications. Built to ASME Section VIII,
it is often applied unspared in supercritical power plants and extended service run applications.
• Smooth, reliable operation due to precision cast diffusers that are fully shrouded and SPECIFICATIONS
100% NDE inspected Flows to: 3900 m3/h (17 170 gpm)
• Longer service life via rugged rotor with in-line impellers, minimized bearing spans and Heads to: 4500 m (14 750 ft)
heavy-duty shaft to reduce the effect of rotor contact during upsets Press. to: 538 bar (7800 psi)
• Improved durability of critical clearance parts with advanced laser treatments that Temp: to 250°C (480°F)
reduce wear
IDP • Upset tolerance provided by a compensator gasket group that allows for expansion Refer to literature PS-30-13
during thermal transients while also maintaining seal integrity at flowse ve.com/library.
HDB and HSB

Dual volute-type barrel pumps with axially split inner cases, the HDB and HSB are renowned for high reliability and
uptime in various applications in the power generation industry.
• Operational stability and reliability are inherent to the rugged dual-volute and opposed- SPECIFICATIONS
impeller design plus forged barrel, utility grade rotor and heavy-duty bearings Flows to: 4000 m3/h (17 610 gpm)
• Easy maintenance facilitated by the precision-machined axially split inner case, which Heads to: 4300 m (14 000 ft)
requires only light bolting because it is under hydraulic compression Press. to: 450 bar (6525 psi)
• Low NPSHA and excellent fl w stability with an available double-suction, first-st ge
Byron Jackson® Temp: to 425°C (800°F)
impeller (HDB)
• Excellent rotor dynamics due to the dynamically balanced rotor, ensuring inherently Refer to literature PS-30-12
balanced axial thrust over the full operating range at flowse ve.com/library.
BP
Medium-pressure, diffuser-style barrel pump for boiler feed, descaling, reactor charge and other services. Compliant with
ISO 13709/API 610 (BB5) requirements.
• Optimized efficien y due to precision-cast impellers and diffusers, designed using the SPECIFICATIONS
latest computational fluid ynamics technology Flows to: 1050 m3/h (4620 gpm)
• Ease of maintenance resulting from a progressively stepped shaft that simplifies Heads to: 3500 m (11 480 ft)
replacement of shrink-fit impeller Press. to: 295 bar (4260 psi)
• Adaptable to the effects of pressure and temperature provided by spiral-wound Temp: to 425°C (800°F)
gaskets, which are also corrosion-resistant
Niigata Worthington™ • Superior corrosion-resistance and reliable sealing in high-pressure and high- Refer to literature PS-30-11
temperature services due to Inconel® coating on critical sealing surfaces at flowse ve.com/library.
VALVES | BETWEEN
PUMPS
WCC
LINEAR CONTROL
Medium-duty, diffuser-type barrel pump built to ISO 13709/API 610 (BB5) and customer specific tions. Typically used
in refine y services, pipeline, amine and ethylene feed, water and CO2 injection, plus hydraulic power recovery.
• Optimized hydraulic efficien y and repeatable performance due to precision-cast SPECIFICATIONS

tandem impellers, multi-vane diffusers and advanced balance drum design Flows to: 1000 m3/h (4400 gpm)
• Incredible reliability with advanced close clearance technologies, erosion- and Heads to: 2800 m (9200 ft)
BEARINGS
abrasion-resistant materials in the running fits and robust bearing system Press. to: 275 bar (4000 psi)
• Reduced downtime and maintenance from the standard cartridge type Temp: to 425°C (800°F)
IDP construction that allows major assembly and disassembly in the workshop rather
than the fiel Refer to literature PS-30-7
• Balanced hydraulic loads over the operating range while maximizing efficien y at at flowse ve.com/library.
duty conditions enabled by single diameter balance drum
HDO and HSO

Offered in both general and special purpose configur tions, these volute-style barrel pumps are manufactured to
customer specific tions, often exceeding ISO 13709/API 610 (BB5).
• Highest reliability in critical processes assured by the volute design SPECIFICATIONS

• Improved hydraulic efficien y and performance repeatability provided by the Flows to: 4000 m3/h (17 610 gpm)
precision-cast opposed impellers Heads to: 5365 m (16 000 ft)
• Nearly balanced axial thrust with volute-type opposed impeller design that breaks Press. to: 450 bar (6525 psi)
down 50% of the discharge pressure to the intermediate stage before the long
Byron Jackson Temp: to 425°C (800°F)
crossover
• Excellent rotor dynamics due to the dynamically balanced rotor, ensuring Refer to literature PS-30-8
inherently balanced axial thrust over the full operating range at flowse ve.com/library.
WIK and WIKO

Extra heavy-duty barrel pump intended for special purpose, unspared, high-power density applications. Pumps are
custom engineered to customer requirements, often exceeding ISO 13709/API 610 (BB5).
• Outstanding reliability assured by low static deflection the result of a large SPECIFICATIONS
diameter shaft and short bearing spans Flows to: 1600 m3/h (7000 gpm)
• Optimized efficien y due to precision-cast, low specific speed impellers multi- Heads to: 7000 m (23 000 ft)
vane diffuser and milled channel collectors to ensure repeatable performance Press. to: 1000 bar (14 500 psi)
• Smooth, stable performance with multi-vane, split diffuser and channel ring Temp: to 425°C (800°F)
Flowserve collectors that eliminate radial imbalance
• Performance tested in accordance with API and Hydraulic Institute standards Refer to literature PS-30-9
• Ease of maintenance with back pullout, cartridge-style construction at flowse ve.com/library.
flowserve.com 43
VPC
44
PUMPS | VERTICAL
VERTICAL
The global requirement for vertical pumps is diverse. The Flowserve portfolio reliably
addresses the vast majority, from general industrial products to massive systems used in
power generation and oil and gas. Designed to critical global standards, these pumps meet
customer energy savings goals with their extensive hydraulic options that precisely meet
operating requirements. Long-life performance in aggressive media is achieved with non-
metallic and erosion-resistant wet ends for many designs.
Vertical – Quick Reference*

3000 m3/h 2000 m 200 bar -200°C to 350°C

WUJ Wet-Pit
(13 200 gpm) (6560 ft) (2900 psi) (-328°F to 660°F)
13 600 m3/h 700 m 100 bar -73°C to 200°C

VTP Wet-Pit
(60 000 gpm) (2300 ft) (1450 psi) (-100°F to 400°F)
25 000 m3/h 500 m 70 bar -45°C to 204°C

QL and QLQ Wet-Pit
(110 000 gpm) (1640 ft) (1015 psi) (-50°F to 400°F)
181 700 m3/h 110 m

VCT Wet-Pit
(800 000 gpm) (350 ft)
— —
181 700 m3/h 11 m

AFV Wet-Pit
(800 000 gpm) (35 ft)
— —
1035 m3/h 120 m 8.6 bar -18°C to 150°C

Barge VTP Wet-Pit
(5000 gpm) (400 ft) (125 psi) (0°F to 300°F)
13 600 m3/h 530 m 100 bar to 600°C

Molten Salt VTP Wet-Pit
(60 000 gpm) (1740 ft) (1450 psi) (1100°F)
25 000 m3/h 500 m 70 bar -45°C to 204°C

QLC and QLQC Double-Case
(110 000 gpm) (1640 ft) (1015 psi) (-50°F to 400°F)
* Additional products shown on next page
flowserve.com 45
Vertical – Quick Reference, cont‘d.
25 000 m3/h 500 m 70 bar -45°C to 204°C

QLC and QLQC Double-Case
(110 000 gpm) (1640 ft) (1015 psi) (-50°F to 400°F)
13 600 m3/h 1070 m 100 bar -73°C to 230°C

VPC Double-Case
(60 000 gpm) (3500 ft) (1450 psi) (-100°F to 450°F)
3000 m3/h 2000 m 200 bar -200°C to 350°C

WUC Double-Case
(13 200 gpm) (6560 ft) (2900 psi) (-328°F to 660°F)
4600 m3/h 500 m 50 bar -18°C to 200°C

APKD Double-Case
(20 200 gpm) (1640 ft) (725 psi) (0°F to 400°F)
Pleuger Deep-Well 6000 m3/h 800 m

— —
SUBM Submersible Motor (26 415 gpm) (2625 ft)
Byron Jackson Deep-Well 6000 m3/h 800 m

— —
SUBM Submersible Motor (26 415 gpm) (2625 ft)
1350 m3/h 30 m 10 bar to 110°C

MJ and MJC Slurry
(6000 gpm) (100 ft) (150 psi) (225°F)
1350 m3/h 30 m 10 bar to 110°C

RJ and RJC Slurry
(6000 gpm) (100 ft) (150 psi) (225°F)
250 m3/h 45 m 5 bar to 100°C

Terra-Titan Slurry
(1100 gpm) (150 ft) (70 psi) (212°F)
4542 m3/h 91 m to 593°C

VPL3300 Slurry
(20 000 gpm) (300 ft)
—
(1100°F)
1500 m3/h 150 m to 100°C

VPL3600 Slurry
(6600 gpm) (492 ft)
—
(212°F)
17 000 m3/h 40 m 7 bar to 40°C

MVX Solids Handling
(75 000 gpm) (130 ft) (100 psi) (104°F)
1400 m3/h 250 m 25 bar -40°C to 400°C

CPXV Sump
(6160 gpm) (820 ft) (365 psi) (-40°F to 752°F)
1300 m3/h 116 m 12 bar to 180°C

ESP3 Sump
(5700 gpm) (380 ft) (175 psi) (350°F)
PolyChem™ 565 m3/h 110 m 17 bar -30°C to 90°C

Sump
VGRP (2500 gpm) (350 ft) (250 psi) (-20°F to 200°F)
182 m3/h 244 m -51°C to 52°C

VPL1700 Sump
(800 gpm) (800 ft)
—
(-60°F to 125°F)
1000 m3/h 150 m 20 bar to 350°C

ECPJ Sump
(4400 gpm) (500 ft) (285 psi) (660°F)
PUMPS
W E T- P I T
WUJ
VERTICAL
LINEAR CONTROL
Highly engineered heavy-duty, multistage vertical pump for wet-pit or deep well applications requiring continuous,
unspared duty in a variety of severe services. Meets or exceeds ISO 13709/API 610 (VS1).
• Maximum design and operating flexibility enabled by modular design system SPECIFICATIONS
along with mixed or radial fl w hydraulics, which enable precise configur tion Flows to: 3000 m3/h (13 200 gpm)
• Unspared reliability owing to under-critical stiff shaft design, separate axial Heads to: 2000 m (6560 ft)
thrust bearing assembly and pressure-containing parts certified to intern tional Press. to: 200 bar (2900 psi)
standards Temp: -200°C to 350°C
• Economical retention of operating efficien y and mechanical stability with casing (-328°F to 660°F)
and impeller wear rings
• Reduced maintenance with flanged space -type coupling that permits easy access Refer to literature PS-40-8
to the thrust bearings and mechanical seals without disturbing the motor
W E T- P I T
VTP
Diffuser-type, single or multistage vertical turbine pump for use in wet-pit or deep well applications in a variety of
industries, including oil and gas, power, water, chemical, mining and metals.
• Unsurpassed hydraulic coverage with more than 300 bowl and impeller designs to SPECIFICATIONS
ensure optimum pump selection Flows to: 13 600 m3/h (60 000 gpm)
• Design flexibility arising from a wide variety of configu tions, constructions and Heads to: 700 m (2300 ft)
materials to suit application requirements; standard and ISO 13709/API 610 (VS1) Press. to: 100 bar (1450 psi)
units available Temp: -73°C to 200°C
• Lower operating costs from available aftermarket rebowl services that revitalize (-100°F to 400°F)
aged VTPs — including competitor models — to reduce power consumption,
downtime and maintenance costs
W E T- P I T
QL and QLQ
Double-suction, twin-volute vertical turbine pumps in single (QL) or multistage (QLQ) designs. ISO 13709/API 610 (VS2)
compliant units available.
• Superior performance from innovative, double-suction impeller that produces SPECIFICATIONS

more fl w and higher head at lower NPSHR Flows to: 25 000 m3/h (110 000 gpm)
• High uptime with sealed-for-life bottom bearing plus heavy-duty discharge head Heads to: 500 m (1640 ft)
and integral line shaft bracket, which ensure shaft concentricity and alignment Press. to: 70 bar (1015 psi)
• High operating efficien y promoted by renewable impeller wear rings that restore Temp: -45°C to 204°C (-50°F to 400°F)
original clearances
• Reliable performance in applications containing silt or abrasive solids owing to Refer to literature PS-40-6
optional enclosed lineshaft construction
flowserve.com 47
VERTICAL
W E T- P I T
VCT
Mixed-fl w circulating pump designed for continuous duty wet-pit applications requiring large capacities at relatively low
heads. Often used in power plants, desalination, cooling water, drainage, flood protection and w ter supply.
• Reliable, efficient performance assured by a five-mitered el w discharge head SPECIFICATIONS

designed to reduce friction loss Flows to: 181 700 m3/h (800 000 gpm)
• Outstanding operating efficien y arising from multiple hydraulic combinations that Heads to: 110 m (350 ft)
allow precise configur tion
• Longer service life due to an inner column enclosing tube that is internally pressurized Refer to literature PS-40-6
to lubricate bearings and prevent shaft and bearing damage during operation at flowse ve.com/library.
• Design flexibility with above- or bel w-grade discharge, pullout and non-pullout
Flowserve designs, plus grease, freshwater or self-lubricating column constructions
W E T- P I T
AFV
The AFV axial fl w suspended shaft vertical pump is a single-stage, propeller-type design. This pump is designed for low
head movement of water for municipal, agricultural and industrial services.
• Optimal performance from a flared suction bell th t provides a smooth entrance to the SPECIFICATIONS
impeller and has integral splitters to reduce swirl and entrance losses Flows to: 181 700 m3/h (800 000 gpm)
• Improved reliability resulting from a hydraulically balanced three- or four-vane axial Heads to: 11 m (35 ft)
fl w propeller and top propeller hub wear ring to reduce axial down thrust
• Installation versatility provided by a discharge elbow that can be located above or Refer to literature PS-40-3
below ground at any orientation at flowse ve.com/library.
Flowserve • Design flexibility with pullout or non-pullout construction packing or mechanical seal,
drive options, and optional enclosed lineshaft with oil or freshwater lubrication
W E T- P I T
Barge VTP
Vertical self-contained, self-priming unit designed for barge unloading and transfer operations. Innovative pollution
prevention design inhibits costly oil and chemical spills.
• Reduced stripping turnaround times assured by a self-priming stripper stage that SPECIFICATIONS
operates efficiently t extremely low submergence levels Flows to: 1035 m3/h (5000 gpm)
• Fewer costly oil and chemical spills owing to a bleed off stuffing box th t diverts Heads to: 120 m (400 ft)
product bypass back to the compartment via a sealed return line Press. to: 8.6 bar (125 psi)
• Ease of maintenance resulting from large ports that allow access to the stuffing box Temp: -18°C to 150°C (0°F to 300°F)
without removing the driver
Flowserve Refer to literature PSS-40-7.2
VALVES || VERTICAL
PUMPS
W E T- P I T
Molten Salt VTP
LINEAR CONTROL
Single or multistage vertical turbine pump engineered for molten salt circulation in concentrated solar power plants.
Designed using advanced thermal mapping software to ensure adequate heat dissipation and mitigate distortion.
• Increased energy generation due to low pump submergence SPECIFICATIONS

• Longer service life at high temperatures assured by advanced heat dissipation Flows to: 13 600 m3/h (60 000 gpm)
design that prevents distortion Heads to: 530 m (1740 ft)
• Materials engineered to equalize thermal growth Press. to: 100 bar (1450 psi)
• Advanced fluid sealing system protects gainst fluid leak ge Temp: to 600°C (1100°F)
Refer to literature FPD-16
Flowserve
Harnessing the Power of the Sun

Flowserve pumps can take the heat. They play a key role at the world’s
first commercial concentr ted solar power plant utilizing a central
tower receiver with thermal storage capabilities, located in
Spain. At the heart of the plant are seven Flowserve vertical
turbine pumps (VTPs) specially configured to handle the
molten salt heat transfer fluid t temperatures up to 600°C
(1100°F) and pressures up to 100 bar (1450 psi).
Photo: Gemasolar Plant. Property of Torresol Energy © Torresol Energy
DOUBLE-CASE
QLC and QLQC

Double-suction vertical turbine pumps in single (QLC) or multistage (QLQC) units featuring true twin volutes. ISO
13709/API 610 (VS2) compliant design available.
• Superior performance from innovative, double-suction impeller that produces SPECIFICATIONS

more fl w and higher head at lower NPSHR Flows to: 25 000 m3/h (110 000 gpm)
• High uptime with sealed-for-life bottom bearing plus heavy-duty discharge head Heads to: 500 m (1640 ft)
and integral line shaft bracket, which ensure shaft concentricity and alignment Press. to: 70 bar (1015 psi)
• High operating efficien y promoted by renewable impeller wear rings that restore Temp: -45°C to 204°C (-50°F to 400°F)
original clearances
• Reliable performance in applications containing silt or abrasive solids owing to Refer to literature PS-40-4
optional enclosed lineshaft construction
flowserve.com 49
VERTICAL
DOUBLE-CASE
VPC
Diffuser-type, vertical turbine pump well-suited for closed system and low NPSH applications. Available in single or
multistage units, as well as standard and ISO 13709/API 610 (VS6) compliant designs.
• Broad application versatility due to extensive hydraulic coverage plus wide variety of SPECIFICATIONS
configur tions, constructions and materials to suit application requirements Flows to: 13 600 m3/h (60 000 gpm)
• Lower installation costs with low NPSH first-st ge impeller that reduces suction can Heads to: 1070 m (3500 ft)
length Press. to: 100 bar (1450 psi)
• Lower operating costs from available aftermarket rebowl services that revitalize aged Temp: -73°C to 230°C
VPCs — including competitor models — to reduce power consumption, downtime and (-100°F to 450°F)
maintenance costs
DOUBLE-CASE
WUC
Compliant with ISO 13709/API 610 (VS6), the WUC is a highly engineered heavy-duty, multistage process vertical pump
designed for continuous duty in critical applications at high pressures and temperatures.
• Maximum design and operating flexibility enabled by modular design system along SPECIFICATIONS
with mixed or radial fl w hydraulics that enable precise configur tion Flows to: 3000 m3/h (13 200 gpm)
• Unspared reliability owing to stiff shaft construction, a self-contained axial thrust Heads to: 2000 m (6560 ft)
bearing housing and pressure-containing parts certified to intern tional standards Press. to: 200 bar (2900 psi)
• Reduced maintenance with flanged spacer type coupling th t permits easy access to Temp: -200°C to 350°C
the thrust bearings and mechanical seals (-328°F to 660°F)
• Reliable cryogenic operation made possible by an available coffer dam system, which
Worthington provides a gas barrier between pumped fluid and mechanical sea Refer to literature PS-40-9
DOUBLE-CASE
APKD
The APKD is ideal for critical services with limited NPSHA. An innovative double-suction impeller in a true twin-volute
design produces more fl w and higher head at lower NPSHR.
• Lower energy consumption and operating costs provided by a versatile series of SPECIFICATIONS
impeller design options that enable optimum hydraulic fi Flows to: 4600 m3/h (20 200 gpm)
• Wide operating range with multiple suction-specific speed option Heads to: 500 m (1640 ft)
• Reliable operation with balanced hydraulic loads owing to double-suction, Press to: 50 bar (725 psi)
twin-volute design Temp: -18°C to 200°C (0°F to 400°F)
Flowserve at flowse ve.com/library.
VALVES || VERTICAL
PUMPS
DEEP-WELL
Pleuger SUBM
LINEAR CONTROL
The Pleuger SUBM submersible motor pump uses water-filled wet-wound motors. This design is environmentally
friendly, provides high efficien y and offers great reliability.
• Exceptional submersible motor value owing to superior thrust bearing design, SPECIFICATIONS
100% pressure compensation system, re-windable stators and materials options Flows to: 6000 m3/h (26 415 gpm)
for both strength and dielectric characteristics Heads to: 800 m (2625 ft)
• Precise configur tion for application needs with many hydraulic, cooling, Motor Sizes to: 5000 kW (6700 hp)
lubrication, sealing, materials and accessory options
• Ease of maintenance and extended service life provided by wet-type motor with Refer to literature PS-50-3
Pleuger® non-toxic Class Y insulated windings and internal circulation system
• Maximum pump efficien y with minimum vibration due to dynamically balanced
heavy-duty impellers and bowl cases
DEEP-WELL
Byron Jackson SUBM

Oil-filled submersible motor pump built for the world's most demanding deep-well se vices. Rugged, reliable and
long-lasting, the Byron Jackson SUBM offers significant total life ycle cost savings.
• Extended motor service life enabled by induction motor plus Class F insulation SPECIFICATIONS
system designed with vacuum-pressure impregnated epoxy, re-windable stators Flows: to 6000 m3/h (26 415 gpm)
and internal circulation system Heads: to 800 m (2625 ft)
• Maximum pump efficien y with minimum vibration provided by dynamically Motor Sizes to: 1650 kW (2200 hp)
balanced heavy-duty impellers and bowl cases
• Ease of installation with sealed power cable plug-in feature, which eliminates Refer to literature PS-50-3
field splicin at flowse ve.com/library.
Byron Jackson • Precise configur tion for application needs owing to numerous hydraulic, cooling,
lubrication, sealing, materials and accessory options
Life-Giving Water in Thailand

Thailand’s Royal Irrigation Department chose Flowserve to help
provide its people with dependable irrigation and flood control
For years the people living in the 3.65 million acre Pasak
River Basin, north of Bangkok, suffered cycles of drought
and flood No longer. With the construction of a dam
employing vertical mixed fl w pumps from Flowserve,
the people are protected from flooding and h ve
adequate water to grow crops.
flowserve.com 51
VERTICAL
SLURRY
MJ and MJC
Vertical lineshaft (MJ) and cantlever (MJC) hard-metal slurry pumps designed for services containing coarse solids in
suspension (to 70% by weight). Suitable for a broad range of wet- and dry-pit services.
• Increased uptime provided by extra-thick wear allowances SPECIFICATIONS

• Efficient oper tion and prolonged service life as a result of concentric casing and anti Flows to: 1350 m3/h (6000 gpm)
pre-rotation vanes, which reduce suction pipe swirl and impeller wear Heads to: 30 m (100 ft)
• Extended seal and bearing life enabled by closed impeller with pump-out vanes, which Press. to: 10 bar (150 psi)
reduces stuffing box pressure and suction recircul tion as well as balances axial Temp: to 110°C (225°F)
hydraulic loads
Worthington • Reduced inventory costs from parts interchangeability among related horizontal and Refer to literature PS-10-19
vertical configur tions at flowse ve.com/library.
SLURRY
RJ and RJC
Rubber-lined lineshaft (RJ) and cantilever (RJC) slurry pumps designed to handle services containing fine solids in
suspension (to 70% by weight). Suitable for a broad range of wet- and dry-pit applications.
• Low total cost of ownership provided by replaceable rubber liners SPECIFICATIONS

• Extended seal and bearing life enabled by rubber-closed impeller with pump-out Flows to: 1350 m3/h (6000 gpm)
vanes, which reduces stuffing box pressure and suction recircul tion as well as Heads to: 30 m (100 ft)
balances axial hydraulic loads Press. to: 10 bar (150 psi)
• Efficient oper tion and prolonged service life as a result of concentric casing and anti Temp: to 110°C (225°F)
Worthington pre-rotation vanes, which reduce suction pipe swirl and impeller wear
• Reduced inventory costs from parts interchangeability among related horizontal and Refer to literature PS-10-18
vertical configur tions at flowse ve.com/library.
SLURRY
Terra-Titan
This vertical cantilever shaft sump pump is ruggedly built to provide economic reliability demanded by mining, process and
general industries.
• Reliable, long-lasting performance due to rigid one-piece suspended, oversized SPECIFICATIONS

cantilever shaft design, which reduces vibration and tolerates run-dry operation Flows to: 250 m3/h (1100 gpm)
• Reduced maintenance with renewable Terraprene™ shaft sleeve that eliminates shaft Heads to: 45 m (150 ft)
wear within the casing Press. to: 5 bar (70 psi)
• Ease of maintenance and efficient oper tion via external impeller adjustment, which Temp: to 100°C (212°F)
provides simple way to adjust clearances for special applications
• Application versatility provided by low-mounted motor, taper lock bushes and V-belt Refer to literature PS-10-7
TKL drive, which allow simple adaptation to suitable pump speeds at flowse ve.com/library.
VALVES || VERTICAL
PUMPS
SLURRY
VPL3300
LINEAR CONTROL
Designed specifically for difficult titanium tetrachloride iCl4) applications in pigments processing, the VPL3300
pump is a true cantilever design with a rugged wet-end construction ideal for this volatile toxic slurry.
• Excellent abrasion resistance and longevity ensured by special slurry wet end SPECIFICATIONS
made from thick-walled, high-chrome iron Flows to: 4542 m3/h (20 000 gpm)
• Reduced wear and recirculation delivered by an impeller that incorporates Heads to: 91 m (300 ft)
repelling vanes specifically designed for erosive se vices Temp: to 593°C (1100°F)
• Durability and long pump life made possible by heavy-duty, anti-friction thrust and
radial bearings located above liquid level
Lawrence Pumps ®
SLURRY
VPL3600
Designed specifically for the coke pit maze pplication found in decoking units, the rugged VPL3600 vertical slurry
pump provides long life in tough, erosive slurry applications. Compliant with ISO 13709/API 610 (VS4).
• Reliable operation ensured by the water-filled column with restriction bushing SPECIFICATIONS
which maintains a clean environment for the shaft and sleeve bearings Flows to: 1500 m3/h (6600 gpm)
• Excellent abrasion resistance and longevity ensured by special slurry wet end Heads to: 150 m (492 ft)
made from thick-walled, high-chrome iron Temp: to 100°C (212°F)
• Reduced wear and recirculation delivered by an impeller that incorporates
repelling vanes specifically designed for erosive se vices Refer to literature PS-40-12
• Available sparger system helps to keep coke particles in suspension to prevent at flowse ve.com/library.
Lawrence Pumps
silting-in of the pump; mechanical agitation systems also available
SOLIDS HANDLING
MVX
The Flowserve MVX is a rugged wet-pit pump designed for use in solids-handling applications and other wet-pit
services. Built and tested in accordance with Hydraulic Institute standards.
• Smooth performance with symmetrical bowl with multi-volute design that provides SPECIFICATIONS
hydraulic balance Flows to: 17 000 m3/h (75 000 gpm)
• Resistance to clogging from solids or stringy materials enabled by splitter guide Heads to: 40 m (130 ft)
vanes and enclosed non-clog impeller Press. to: 7 bar (100 psi)
• Longer service life provided by the enclosed lineshaft, which protects bearing Temp: to 40°C (104°F)
surfaces from abrasion Motor to: 950 kW (1250 hp)
• Smallest model passes spherical solids to 76 mm (3 in) diameter; larger models
pass spherical solids to 152 mm (6 in) diameter
flowserve.com 53
VERTICAL
SUMP
CPXV
Compliant with ISO 5199, the CPXV chemical sump pump offers efficient and reliable se vice in a broad range of
applications. Available with many ISO 13709/API 610 compliant features for oil and gas installations.
• Highly customizable, with more than 40 hydraulic wet-ends, numerous materials, SPECIFICATIONS
multiple mechanical seal options and column lengths to 10 m (32 ft) Flows to: 1400 m3/h (6160 gpm)
• High-efficien y performance delivered by standard front vane open-style impeller Heads to: 250 m (820 ft)
• Ease of maintenance with axial adjustment of the heavy-duty thrust bearings made Press. to: 25 bar (365 psi)
above sole plate level Temp: -40°C to 400°C (-40°F to 752°F)
• Fully jacketed molten sulfur configur tion available
• Increased safety with Category 1 (Zone 0) ATEX configur tion for explosive Refer to literature PS-10-31
atmospheres beneath the sole plate at flowse ve.com/library.
IDP
SUMP
ESP3
This ruggedly built vertical, chemical sump pump is designed to provide improved performance, increased part
standardization and reduced inventory costs.
• Increased parts standardization and reduced inventory costs from the only vertical SPECIFICATIONS
wet-pit immersion sump pump to offer parts interchangeability with standard Flows to: 1300 m3/h (5700 gpm)
ASME B73.1 horizontal pumps (Durco Mark 3) Heads to: 116 m (380 ft)
• Repeatable performance for the life of the pump due to reverse vane impeller Press. to: 12 bar (175 psi)
• Reduced maintenance and downtime in difficult process fluids wing to a wide Temp: to 180°C (350°F)
array of wetted materials, bearing materials and flush plan options
• Low total cost of ownership made possible by many features designed to reduce Refer to literature PS-10-24
IDP costs associated with installation and maintenance at flowse ve.com/library.
SUMP
PolyChem VGRP
Engineered glass-reinforced polymer composite overhung sump pump offering cost-effective corrosion resistance in a
lightweight, non-galling, non-sparking and non-conductive design.
• Corrosion resistance superior to more expensive high-alloy metals, which provides a SPECIFICATIONS
lower investment cost and long-term solution in acid- and chloride-rich applications Flows to: 565 m3/h (2500 gpm)
• High efficiencies and reduced maintenance due to externally adjustable semi-open Heads to: 110 m (350 ft)
impeller that is inherently balanced Press. to: 17 bar (250 psi)
• Increased uptime and longer bearing life provided by shaft/bearing system, which Temp: -30°C to 90°C (-20°F to 200°F)
operates well below the first critical speed and results in less whi
• Ease of maintenance due to design of pull-out bearing retainer Refer to literature PS-10-17
Durco at flowse ve.com/library.
VALVES || VERTICAL
PUMPS
SUMP
VPL1700
LINEAR CONTROL
Designed specifically for transferring toxic liquids (e.g. chlorine, phosgene and anhydrous cyanide), the VPL1700
multistage, vertical line shaft, top-entry, tank-mounted pump is designed for maximum safety and reliability.
• Personnel safety maximized with shaft sealing and hydraulic upgrades such as SPECIFICATIONS
emergency seals and excess fl w check valves Flows to: 182 m3/h (800 gpm)
• Highly configurable with numerous materials of construction and optional upgrades to Heads to: 244 m (800 ft)
maximize safety, reliability and ease of maintenance Temp: -51°C to 52°C
• Lowest fugitive emissions made possible by special gas seal design (-60°F to 125°F)
• Reliability assured by an available instrumentation package that controls the fl w of
buffer gas to the seal chamber and monitors critical operating parameters
Lawrence Pumps
SUMP
ECPJ
This rugged, single-stage, vertical-lineshaft sump pump is a proven performer in tough chemical and hydrocarbon
processing applications. Fully compliant with ISO 13709/API 610 (VS4).
• Dependable performance and extensive mechanical and hydraulic design flexibility SPECIFICATIONS
resulting from the ability to custom engineer each pump for its specific pplication Flows to: 1000 m3/h (4400 gpm)
• Greater reliability with lower inventory costs enabled by thrust pot design that permits Heads to: 150 m (500 ft)
standard (non-thrust) electrical motors to be used Press. to: 20 bar (285 psi)
• Smooth operation over a wide fl w range ensured by dynamically balanced precision- Temp: to 350°C (660°F)
cast impeller
• Improved low-fl w, high-head performance with available Barske-type impeller Refer to literature PS-10-10
Worthington • Steam-jacketed version for liquid sulfur service available at flowse ve.com/library.
flowserve.com 55
MP1
56
PUMPS | POSITIVE DISPLACEMENT
POSITIVE DISPLACEMENT
Reliable performance in tough applications is achieved through robust power transmission
and heavy-duty liquid ends for every Flowserve positive displacement pump. Our versatile
range of diaphragm, gear and screw configurations helps customers avoid costly upfront
costs with durable, high-speed designs. Long service intervals that keep plants running
are the norm, even in ultra-high viscosity and multiphase fluid applications.
Positive Displacement – Quick Reference

Product Sub-Type Flows to Pressures to Temperatures
4 m3/h
CT6 Diaphragm
(18 gpm)
— —
275 m3/h 35 bar to 350°C

GR Gear
(1200 gpm) (500 psi) (650°F)
27 m3/h 17 bar to 175°C

GA Gear
(120 gpm) (250 psi) (350°F)
180 m3/h 20 bar -50°C to 450°C

Gearex Gear
(800 gpm) (300 psi) (-60°F to 842°F)
2550 m3/h 100 bar to 450°C

TSP Twin Screw
(11 200 gpm) (1450 psi) (842°F)
Multiphase 2250 m3/h 50 bar to 450°C

MP1 Twin Screw (10 000 gpm) (720 psi) (850°F)
flowserve.com 57
POSITIVE DISPLACEMENT
DIAPHRAGM
CT6
With market-leading fl w rates, the CT6 self-priming diaphragm pump is the premier solution for agricultural and DEF
transfer needs. For use with caged IBCs, mini bulk tanks and drums.
• Broad application versatility enabled by a variety of mounting configur tions, SPECIFICATIONS

input voltages, brackets, dip tubes, fl w meters, fittings hoses and valves to meet Flows to: 4 m3/h (18 gpm)
application needs
• Ease of use provided by a complete, out-of-the-box system and self-priming from a Refer to literature PSS-90-20.23
dry state and PSS-90-20.24 at
• Time-saving, efficient chemical transfer facilit ted by market-leading fl w rates flowse ve.com/library.
Scienco™ • Two-year limited warranty
GEAR
GR
GR pumps provide high efficien y, pulse-free pumping, even under challenging conditions. They are designed to handle
viscous fluids (up to 20 000 cP) across a broad spectrum of flows and pressures.
• Increased uptime while accommodating heavy, highly viscous loads made possible by SPECIFICATIONS
double-helical herringbone gears and between-bearings design Flows to: 275 m3/h (1200 gpm)
• Lower operating costs provided by high-speed capability, which eliminates expensive Press. to: 35 bar (500 psi)
speed reduction accessories and enables the use of off-the-shelf motors Temp to: 350°C (650°F)
• Application flexibility facilit ted by convertible stuffing box which allows for ample
packing or mechanical seals Refer to literature PS-60-4
GEAR
GA
GA cast iron gear pumps have long been workhorses in highly viscous applications (to 5000 cP) within a multitude of
industries due to their reliability, efficien y and low total lifecycle costs.
• Dependable, quiet, pulse-free operation made possible by superior between bearings SPECIFICATIONS
design and external double-helical, herringbone gear design Flows to: 570 m3/h (2500 gpm)
• Lower operating costs provided by high-speed capability, which eliminates expensive Press. to: 17 bar (250 psi)
speed reduction accessories and enables the use of off-the-shelf motors Temp: 175°C (350°F)
• Reduced maintenance with inherently hydraulically balanced design that eliminates
end thrust and the need for thrust bearings Refer to literature PS-60-4
• Convertible stuffing box which allows for ample packing or mechanical seals
VALVES || POSITIVE
PUMPS
GEAR
Gearex
LINEAR CONTROL
Extremely rugged and unusually compact for its high capacity and range, the Gearex rotary pump is generally
compliant with API 676, second edition. Handles viscosities to 20 000 cP.
• Long, reliable operation due to precision-machined herringbone pumping gears SPECIFICATIONS

that provide low vibration, pulseless discharge while timing gears transfer power Flows to: 180 m3/h (800 gpm)
DISPLACEMENT
with minimal wear Press. to: 20 bar (300 psi)
• Lower total cost of ownership derived from ability to directly connect to motors up Temp: -50°C to 450°C (-60°F to 842°F)
to 1800 rpm, eliminating the need for heavy foundation, belts or reduction gears
• Increased uptime via heavy-duty ball and roller bearings, which support the Refer to literature PS-60-4
rotating element to prevent contact with the housing
• Reduced downtime with split brackets facilitate seal maintenance
TWIN SCREW
TSP
Built in accordance with API 676, the TSP double-suction, timed twin-screw pump improves upon traditional rotary
pump designs by providing smoother, more constant fl w.
• Increased availability, especially in fluids th t are contaminated or have poor SPECIFICATIONS

lubricity, assured by external bearings and AGMA 11 timing gears, which are Flows to: 2550 m3/h (11 200 gpm)
housed in separate oil reservoirs to eliminate exposure to pumped flui Diff. Press. to: 100 bar (1450 psi)
• Application versatility provided by high volumetric efficien y over a wide range of Temp: 450°C (842°F)
viscosities (up to 55 million cP), run-dry capability and ISO 21049/API 682 seal
chamber that accommodates multiple seal types Refer to literature PS-60-1
Sier-Bath® at flowse ve.com/library.
• Ease of maintenance with split bearing brackets that provide access to the
bearings and seals
M U LT I P H A S E T W I N S C R E W
MP1
Compliant with API 676, the MP1 is engineered for reliability in the toughest multiphase upstream oil field applications.
Handles viscosities to 8000 cP, slurries to 70% solids by weight and gas volume fractions (GVF) to 100%
• Rugged and versatile operation that readily accommodates rapid changes in SPECIFICATIONS
viscosities, gas-to-liquid ratios and GVF Flows to: 2250 m3/h (10 000 gpm)
• Reliable, efficient performance from one-piece integral rotor and double-suction Diff. Press. to: 50 bar (720 psi)
design, which provides balanced hydraulic loads Temp: to 450°C (850°F)
• High availability due to external bearings and AGMA 11 timing gears, which are
housed in separate oil reservoirs to eliminate exposure to pumped flui Refer to literature PS-60-2
Flowserve • Easy access to bearings and seals with split bearing brackets at flowse ve.com/library.
• Safety and environmental compliance with ISO 21049/API 682 seal chamber
flowserve.com 59
AEH
PUMPS | SIDE CHANNEL
SIDE CHANNEL
For problem-free, low-flow, high-head pumping under unfavorable suction conditions, our
SIHI side channel pumps routinely deliver in the most difficult applications. In addition to
being self-priming, innovative side channel hydraulics ensure superior process control and
gas-handling capability, especially when pumping liquids at their boiling points or with
entrained gas. Cost of ownership is kept low by excellent hydraulic efficiency, simplifi d
maintenance and a high degree of parts interchangeability.
Side Channel – Quick Reference*

35 m3/h 354 m 40 bar to 180°C

CEH Side Channel
(154 gpm) (1161 ft) (580 psi) (356°F)
35 m3/h 354 m 40 bar to 180°C

AEH Side Channel
(154 gpm) (1161 ft) (580 psi) (356°F)
35 m3/h 242 m 25 bar to 120°C

AKH Side Channel
(154 gpm) (794 ft) (363 psi) (248°F)
7.5 m3/h 98 m 10 bar to 120°C

AOH Side Channel
(33 gpm) (322 ft) (145 psi) (248°F)
12 m3/h 288 m 100 bar to 120°C

ASH Side Channel
(53 gpm) (945 ft) (1450 psi) (248°F)
7.2 m3/h 400 m 25 bar 120°C

ADH Side Channel
(32 gpm) (1312 ft) (362 psi) (250°F)
flowserve.com 61
Side Channel – Quick Reference, cont‘d.
65 l/min 25 bar 80°C

SC Side Channel
(17 gpm)
—
(362 psi) (to 176°F)
100 l/min -20°C to 40°C

SMX Side Channel
(26 gpm)
— —
(-4°F to 104°F)
65 l/min 40 bar -40°C to 60°C

CEB Side Channel
(17 gpm)
—
(580 psi) (-40°F to 140°F)
2 m3/h 27 m 6 bar 100°C

DRV Side Channel
(17 gpm) (88 ft) (218 psi) (212°F)
12 m3/h 70 m 16 bar 120°C

AKL and AKV Side Channel
(50 gpm) (230 ft) (230 psi) (250°F)
PUMPS
SIDE CHANNEL
CEH
SIDE
LINEAR
A centrifugal combined system, the CEH is self-priming and provides reliable pumping under unfavorable suction
conditions. It is ideal for pumping liquids under vapor pressure, such as condensates, refrigerants and liquefied gases
CHANNEL
CONTROL
• Problem-free pumping in applications with NPSHA below 0.5 m (1.64 ft) due to SPECIFICATIONS
centrifugal-combined system construction, which employs a centrifugal inducer Flows to: 35 m3/h (154 gpm)
stage before the side channel stages to lower NPSHR Heads to: 354 m (1161 ft)
• Excellent hydraulic efficien y assured by modular side-channel system with one to Press. to: 40 bar (580 psi)
SIHI eight stages which permits precise configur tion for operating parameters Temp: to 180°C (356°F)
• Low inventory carrying costs and simplified maintenance enabled by high degree
of parts interchangeability between stages Refer to literature PS-120-1
SIDE CHANNEL
AEH
The AEH is a self-priming pump designed per DIN EN 734. It is well-suited for a wide range of applications across
industries, including pure, turbid or aggressive media as well as gas-entrained fluids
• Excellent gas-handling capability due to segmental-type construction with open- SPECIFICATIONS

vane wheel impellers Flows to: 35 m3/h (154 gpm)
• Application versatility made possible by numerous options, including materials, Heads to: 354 m (1161 ft)
bearing arrangements, sealing systems and couplings Press. to: 40 bar (580 psi)
• High-efficien y operation assured by modular side-channel system with one to Temp: to 180°C (356°F)
eight stages, which permits precise sizing for BEP operation
• Reduced spare parts and ease of maintenance made possible by a high degree of Refer to literature PS-120-1
parts interchangeability between stages
SIDE CHANNEL
AKH
The AKH provides trouble-free pumping in a broad range of medium-duty applications in the chemical, oil and general
industries, plus naval applications and DAF systems.
• Superior process control due to a steep performance curve that ensures rigorous SPECIFICATIONS
regulation of the pressure with small changes in capacity Flows to: 35 m3/h (154 gpm)
• Application flexibility due to segmental-type construction with open-vane wheel Heads to: 242 m (794 ft)
impellers, which permits reliable self-priming and gas-handling capability Press. to: 25 bar (363 psi)
• Excellent hydraulic efficien y assured by modular side-channel system with one to Temp: to 120°C (248°F)
SIHI six stages, which allows precise sizing for BEP operation
• Low inventory carrying costs and simplified maintenance wing to a high degree of Refer to literature PS-120-1
parts interchangeability between stages at flowse ve.com/library.
flowserve.com 63
SIDE CHANNEL
SIDE CHANNEL
AOH
The AOH is designed for low-capacity applications with clear or turbid liquids without abrasive particles. It is often used in
agriculture and general industries as well as naval applications.
• Superior process control assured by a steep performance curve that ensures strict SPECIFICATIONS
pressure regulation with nominal capacity changes Flows to: 7.5 m3/h (33 gpm)
• Application flexibility arising from reliable self-priming and gas-handling c pability due Heads to: 98 m (322 ft)
to segmental-type construction with open-vane wheel impellers Press. to: 10 bar (145 psi)
• Low inventory carrying costs and simplified maintenance wing to a high degree of Temp: to 120°C (248°F)
parts interchangeability between stages
SIDE CHANNEL
ASH
The ASH was developed for handling liquefied gases with v por pressures to 80 bar (1160 psi). It is particularly well-suited
for general industry applications involving CO2 production, storage, transportation, drying, cleaning and fire suppression
• Superior gas handling capability due to segmental-type construction with open-vane SPECIFICATIONS
wheel impellers Flows to: 12 m3/h (53 gpm)
• Increased MTBF ensured by a special bearing developed to compensate for the axial Heads to: 288 m (945 ft)
forces in case of high nominal pressures Press. to: 100 bar (1450 psi)
SIHI Temp: to 120°C (248°F)
SIDE CHANNEL
ADH
High-speed, segmental-type, horizontal side channel pump for use in boiler feed, condensate return, pressure boosting
and marine service applications.
• Application reliability provided by self-priming side channel design capable of handling SPECIFICATIONS
gas during normal liquid duty Flows to: 7.2 m3/h (32 gpm)
• Quiet operation from unshrouded vane wheel impellers Heads to: 400 m (1312 ft)
• Longer service life due to flo ting impellers that reduce wear and minimize axial thrust Press. to: 25 bar (362 psi)
• Optimal performance resulting from a steep performance curve that allows precise Temp: 120°C (250°F)
regulation of the pressure with small changes in fl w
SIHI
VALVES || SIDE
PUMPS
SIDE CHANNEL
SC
LINEAR
The SC is a self-priming, centrifugal combined system that provides reliable pumping under unfavorable suction
conditions. It is designed for propane, butane and bottom off-loading in LPG plants.
CHANNEL
• Problem-free pumping in applications with NPSHA between 0.4 m and 0.65 m SPECIFICATIONS
CONTROL
(1.31 ft and 2.13 ft) due to centrifugal-combined system construction, which Flows to: 65 l/min (17 gpm)
employs a centrifugal inducer stage to lower NPSHR Diff. Press. to: 14.5 bar (210 psi)
• Application flexibility due to segmental-type construction with open-vane wheel Press. to: 25 bar (362 psi)
impeller, which permits reliable self-priming and gas-handling capability Temp: 80°C (to 176°F)
• Low inventory carrying costs and simplified maintenance enabled by high degree
of parts interchangeability between stages Refer to literature PS-120-2
SIDE CHANNEL
SMX
Submersible side-channel pump ideal for LPG car-filling pplications. Its innovative canned motor design makes it
easy to replace other submersible pumps used in most LPG car-filling st tions.
• Reliable, continuous operation and low installation cost due to an internal bypass SPECIFICATIONS
connection that secures minimum fl w and eliminates the need for an additional Flows to: 100 l/min (26 gpm)
bypass valve Diff. Press. to: 10 bar (145 psi)
• Energy efficien y through an optional intelligent drive that allows one pump to be Temp: -20°C to 40°C (-4°F to 104°F)
used for two nozzles to reduce energy consumption by adjusting performance
SIHI • Superior process control resulting from side channel hydraulics with a steep Refer to literature PS-120-2
performance curve that ensures strict pressure regulation with capacity changes at flowse ve.com/library.
SIDE CHANNEL
CEB
Vertical, extended tank, side channel unit for pumping liquids at their boiling point or with entrained gas. It is designed
for pumping liquefied petroleum gas and other liquefied gase
• Reliable operation in applications with poor suction conditions due to a special SPECIFICATIONS
suction impeller and an inducer stage that significantly l wer NPSHR Flows to: 65 l/min (17 gpm)
• Simplified install tion with vertical tank pump design that enables retrofitting into Diff. Press. to: 15 bar (217 psi)
most common tanks and dimensions that support submersible pump replacement Press. to: 40 bar (580 psi)
• Reduced maintenance with sealless magnetic drive design Temp: -40°C to 60°C (-40°F to 140°F)
flowserve.com 65
SIDE CHANNEL
SIDE CHANNEL
DRV
Single-stage, vertical side channel pump with threaded flanges Self-priming and capable of handling entrained gas, the
DRV is used in general industry, agriculture, chemical and pharmaceutical applications.
• Installation flexibility wing to compact, vertical arrangement with minimal footprint; SPECIFICATIONS
units can even be suspended when piping systems are sufficiently stabl Flows to: 2 m3/h (17 gpm)
• Excellent gas-handling capability due to segmental-type construction with open vane Heads to: 27 m (88 ft)
wheel impellers Press. to: 6 bar (218 psi)
• Superior process control resulting from a steep performance curve that allows precise Temp: 100°C (212°F)
regulation of the pressure with small changes in fl w
SIHI
SIDE CHANNEL
AKL and AKV

Horizontal (AKL) or vertical (AKV), single-stage, in-line side channel pumps used in pharmaceutical, food and beverage, air
conditioning and refrigeration, chemical and petrochemical applications.
• Ease of maintenance due to an opposite-arranged suction and discharge cover that SPECIFICATIONS
allows all parts subject to wear to be replaced without detaching the pumps from the Flows to: 12 m3/h (50 gpm)
piping system Heads to: 70 m (230 ft)
• Cost-effective choice with low installation costs due to space-saving, light-weight, Press. to: 16 bar (230 psi)
in-line design Temp: 120°C (250°F)
• Low inventory carrying costs and simplified maintenance enabled by high degree of
SIHI parts interchangeability between stages Refer to literature PS-120-1
A Global Footprint for Local Support

Flowserve is committed to providing our customers with
uncompromising support, wherever and whenever you need us.
Our worldwide network of quick response centers staffed by
highly skilled engineers and technicians is available around
the clock, seven days a week to respond to your questions,
evaluate and troubleshoot problems, and provide reliable
long-term solutions.
PUMPS
VALVES || SIDE CHANNEL
LINEAR CONTROL
67
flowserve.com
KPH
68
PUMPS | VACUUM PUMPS & COMPRESSORS
VACUUM PUMPS & COMPRESSORS
Safe, dependable performance across a range of difficult compression applications is the
hallmark of our portfolio of liquid ring vacuum pumps and compressors. Customers benefit
from application flexibility that keeps operating costs down, taking advantage of a broad
range of capacities and pressures, as well as numerous models that leverage common
components. Trouble-free operation and maximum uptime are achieved through robust
designs capable of handling entrained liquid and vapor.
Vacuum Pumps & Compressors – Quick Reference*

Suction Suction Compression
Product Sub-Type Capacity to Pressure Pressure to
Dry Vacuum 1500 m3/h <0.01 mbar
SIHIdry Pump (900 cfm) (<0.007 torr)
—
Dry Vacuum 8000 m3/h <0.001 mbar

SIHIboost Pump (4800 cfm) (<0.0007 torr)
—
Liquid Ring 470 m3/h 33 to 1013 mbar

LEM and LEL Vacuum Pump (276 cfm) (24.7 to 760 torr)
—
Liquid Ring 5150 m3/h 33 to 1013 mbar

LEH Vacuum Pump (3030 cfm) (24.7 to 760 torr)
—
Liquid Ring 12 000 m3/h 33 to 1013 mbar

LPH Vacuum Pump (7063 cfm) (24.7 to 760 torr)
—
Liquid Ring 11 000 m3/h atmospheric to

KPH Compressors (6475 cfm)
—
12 barg (174 psig)
flowserve.com 69
Vacuum Pumps & Compressors – Quick Reference, cont‘d.
Suction Suction Compression
Product Sub-Type Capacity to Pressure Pressure to
10-3 mbar
Vacuum 10 000 m3/h
PL Systems (5886 cfm)
(7x10-4 torr) —
to atmospheric
Membrane provided
PM Systems upon request
— —
Compressor 10 000 m3/h atmospheric to

PK Systems (5886 cfm)
—
12 barg (174 psig)
PUMPS
DRY VACUUM PUMP
SIHIdry
VACUUM
LINEAR CONTROL
A completely dry running vertical twin-screw machine with no mechanical shaft seals. Designed for chemical,
pharmaceutical, and industrial applications requiring uncontaminated vacuum, free from oil or service liquids.
• Lower life cycle cost made possible by dry operation, eliminating service liquids, SPECIFICATIONS
lubrication and waste disposal costs Suct. Cap. to: 1500 m3/h (900 cfm)
PUMPS & COMPRESSORS

• Increased energy efficien y from intelligent drive system that performs ongoing Ult. Press. to: <0.01 mbar (<0.007 torr)
rotor diagnostics while optimizing speed and pressure control
• Increased personnel safety enabled by low-noise, gearbox-free operation (all Refer to literature PS-110-4 and
models), plus explosion-proof design for chemical and pharmaceutical models PS-110-5 at flowse ve.com/library.
SIHI
DRY VACUUM PUMP
SIHIboost
Dual-stage vacuum systems that deliver deep vacuum with less power. Provides completely dry compression of gases
from vacuum up to atmospheric conditions.
• Economical performance enabled by low power consumption and fast pump- SPECIFICATIONS
down from atmosphere Suct. Cap. to: 8000 m3/h (4800 cfm)
• Lower maintenance costs and time from oil- and maintenance-free design with Ult. Press. to: <0.001 mbar
no gearbox, mechanical seals or other wearing parts (<0.0007 torr)
• Increased personnel safety and comfort due to low-noise operation
SIHI
LIQUID RING VACUUM PUMP
LEM and LEL

Compact, single-stage liquid ring vacuum pumps featuring simple and robust construction. Typically used for handling
and exhausting dry and humid gases as well as vapors and quantities of water carryover.
• Longer service life enabled by rotating parts with no metallic contact, oil/ SPECIFICATIONS
lubrication-free operation and efficient c vitation protection Suct. Cap. to: 470 m3/h (276 cfm)
• Ease of maintenance and reliable operation from integrated dirt and central Suct. Press: 33 to 1013 mbar
drains, enabling reuse of service liquid (24.7 to 760 torr)
• Suitable for use in noise-sensitive environments due to very low noise levels and
virtually vibration-free operation
SIHI • Environmental regulatory compliance assisted by non-polluting design with near-
isothermal compression
flowserve.com 71
VACUUM PUMPS & COMPRESSORS
LEH
Single-stage liquid ring vacuum pump with a bare shaft design. Often applied in distilling and degassing operations in the
chemical, pharmaceutical and plastics industries.
• Easy maintenance and reliable operation with only one moving part and no internal SPECIFICATIONS
lubrication required Suct. Cap. to: 5150 m3/h (3030 cfm)
• Increased personnel safety ensured by quiet, nearly vibration-free operation and liquid Suct. Press: 33 to 1013 mbar
ring principle, ensuring the safest compression of hazardous and explosive vapors (24.7 to 760 torr)
• Broad application flexibility provided by ability to handle nearly all gases and v pors
plus small quantities of entrained liquid
SIHI
LPH
One- or two-stage vacuum pumps for the handling and exhausting of dry and humid gases. Entrained liquid can be
handled during normal duty.
• Lower maintenance and more reliable operation thanks to standard O-ring sealing and SPECIFICATIONS
oil-free design with no lubrication in working chamber Suct. Cap. to: 12 000 m3/h (7063 cfm)
• Longer service life and minimized wear made possible by non-contacting parts, plus Suct. Press: 33 to 1013 mbar
incorporated dirt and central drains (24.7 to 760 torr)
• Broad application versatility from wide range of available materials, including use as a
compressor with little or no modific tion (depending on model) Refer to literature PS-110-1
LIQUID RING COMPRESSOR
KPH
The KPH series offers efficient compression of condensable v pors and gases, using the liquid ring principle to ensure
maximum safety when compressing hazardous mixtures. Single and multistage designs available.
• Increased personnel safety from low-temperature rise of liquid ring principle, ensuring SPECIFICATIONS
the safest compression of thermally sensitive, hazardous or explosive process gases Suct. Cap. to: 11 000 m3/h (6475 cfm)
• Reduced electrical installation and operating costs provided by low starting torque Comp. Press: atmospheric to
• Longer service life and reduced maintenance owing to non-contacting rotor design, 12 barg (174 psig)
which has only one moving part and does not require internal lubrication
• Increased flexibility in process pplications made possible by ability to function at inlet Refer to literature PS-110-2
pressures lower or higher than atmospheric pressure
VALVES || VACUUM
PUMPS
VACUUM SYSTEM
PL
LINEAR CONTROL
These tailor-made vacuum systems are individually designed for trouble-free operation in almost any application,
including heavy-duty and critical applications.
• Plant and personnel safety in explosive atmospheres ensured by compliance with SPECIFICATIONS
ATEX equipment directives and other explosion protection directives Suct. Cap. to: 10 000 m3/h
• Broad application flexibility enabled by different pump sizes and design of (5886 cfm)
PUMPS & COMPRESSORS

multistage systems, including ejectors and roots blowers Suct. Press: 5 mbar (4 torr)
• Design in accordance with European or American standards as well as customer to atmospheric
specific tions
• Lower maintenance costs and time owing to extremely robust, corrosion-resistant Refer to literature PS-110-3
design at flowse ve.com/library.
SIHI
MEMBRANE SYSTEM
PM
SIHI membrane technology efficiently separ tes process media from inert gas for recycling or recovery. The result is a
very simple and highly effective means of pure substance recovery and emission control.
• Environmental regulatory compliance assured by membrane that allows recovery SPECIFICATIONS

of desired element while clean inert gas passes freely to atmosphere Suct. Cap. to: provided on request
• Very long service life with minimal maintenance via simple, compact design
requiring no regeneration For more information, refer to
• Broad application versatility enabled by ability to process most solvents, PS-110-3 and PS-110-6.
SIHI
monomers, esters, aldehydes, nitriles, aromatics or aqua Refer to literature PS-110-3 and
• Recovery rates up to 99% PS-110-6 at flowse ve.com/library.
COMPRESSOR SYSTEM
PK
Dependable compression makes this liquid-ring technology invaluable, even for the fiercest or thermally unstable
processes.
• Plant and personnel safety in explosive atmospheres ensured by compliance with SPECIFICATIONS
ATEX equipment directives Suct. Cap. to: 10 000 m3/h (5886 cfm)
• Lower maintenance costs and time enabled by extremely robust, corrosion- Suct. Press: atmospheric to 12 barg
resistant design (174 psig)
• Economical performance and longer service life from superior liquid, vapor and
solids handling, plus effective heat exchanger Refer to literature PS-110-3
flowserve.com 73
N-Seal
PUMPS | SPECIALTY PRODUCTS
SPECIALTY PRODUCTS
When customers need absolute reliability in specialty applications, they draw on our proven
engineering and development capabilities. Our reputation for reliability is exemplifi d by
a nuclear heritage that features ASME Section III, Class 1 products performing reliably in
primary coolant and other essential applications globally. Energy recovery devices save
desalination plants millions of dollars in operating costs. Offshore platforms are guided by
our massive thrusters, and our proprietary systems control critical reactions and processes
in refineries around the world.
Specialty Products – Quick Reference*

Nuclear Primary 150 bar

N-Seal Pump Seals
— —
(2175 psi)
—
24 500 m3/h 250 m 170 bar to 300°C

DFSS and DVSS Nuclear
(108 000 gpm) (820 ft) (2500 psi) (580°F)
900 m3/h 245 m 41 bar to 205°C

WDF Nuclear
(4000 gpm) 800 ft) (600 psi) (400°F)
CN
CA
Nuclear
Nuclear
FPO5100 m3/h
(22 500 gpm)
5225 m3/h
(23 000 gpm)
750 m
(2460 ft)
4300 m
(14 000 ft)
120 bar
(1740 psi)
517 bar
(7500 psi)
to 206°C
(402°F)
to 250°C
(480°F)
109 m3/h 1270 m 151 bar to 250°C

RLIJ Nuclear
(480 gpm) (4160 ft) (2200 psi) (480°F)
flowserve.com 75
Specialty Products – Quick Reference, cont‘d.
60 m3/h 1920 m 200 bar to 120°C

CAM Nuclear
(265 gpm) (6300 ft) (3000 psi) (250°F)
4000 m3/h 60 m 14 bar to 80°C

EG Nuclear
(17 610 gpm) (200 ft) (200 psi) (180°F)
5400 m3/h 50 m 14 bar to 80°C

MEV Nuclear
(23 760 gpm) (160 ft) (200 psi) (180°F)
400 m3/h to 100°C

LBSZ Nuclear
(235 cfm)
— —
(212°F)
250 m3/h to 100°C

KBSZ Nuclear
(147 cfm)
— —
(212°F)
650 m3/h 350 m 80 bar to 180°C

KSCZ Nuclear
(2860 gpm) (1250 ft) (1160 psi) (356°F)
Hydraulic Hydraulic
— — — —
Decoking Systems Decoking Systems
Energy Recovery 1200 m3/h 80 bar

ERT Device (5280 gpm)
—
(1160 psi)
—
Energy Recovery 350 m3/h 82 bar

DWEER™ Device (1.4 mgd) per unit
—
(1200 psi)
—
Pleuger
Thruster — — — —
WFSD
60 m (197 ft);
200 000 m3/h
CVP Concrete Volute
(880 000 gpm)
custom designs — —
to 90 m (295 ft)
Polyolefi 18 180 m3/h 40 m 100 bar -45°C to 349°C

AFH9500 Reactor (80 000 gpm) (131 ft) (1450 psi) (-49°F to 660°F)
PUMPS
NUCLEAR PRIMARY PUMP SEALS
N-Seal
SPECIALTY
LINEAR CONTROL
The N-Seal primary pump seal is the nuclear industry’s most advanced mechanical seal technology. Developed for all
OEM reactor coolant, heat transport and recirculation pumps, it is found in NPPs around the world.
• Increased safety assured by a two- to four-stage redundant design wherein each SPECIFICATIONS
stage is capable of handling 100% of the system pressure Press. to: 150 bar (2175 psi)
• Low conversion costs, since piping and instrumentation modific tions are seldom
Refer to literature PS-80-2 and
PRODUCTS
required and Design Change Package (DCP) costs are minimized
• Dramatically improved reliability and running periods with hydrodynamic seal FPD-2 at flowse ve.com/library.
faces with variable face topography
Flowserve
• Improved safety with available patented Abeyance Seal, a passive backup seal for
loss of coolant scenarios
NUCLEAR
DFSS and DVSS

These ASME Section lll, Class 1, radially split, single-stage pumps are designed for primary coolant, reactor
recirculation and primary heat transport service in BWR, PWR and PHWR plants.
• Highly reliable one-piece pump casing features a double-volute design for BWR SPECIFICATIONS
and PHWR applications and a diffuser with a torus-type casing for PWR service Flows to: 24 500 m3/h (108 000 gpm)
• Increased uptime with upgraded rotating element that uses a one-piece welded Heads to: 250 m (820 ft)
shaft-impeller-journal assembly Press. to: 170 bar (2500 psi)
• Improved safety with hydrostatic-pressurized radial bearing that operates Temp: to 300°C (580°F)
submerged in radioactive system water with no external source of cooling water
• Extensive licensed and certified aftermarket support network including hot shop Refer to literature FPD-2
Byron Jackson and code Class 1, 2 and 3 support at flowse ve.com/library.
NUCLEAR
WDF
Safe and reliable single-stage, diffuser-style pump for residual heat removal applications in nuclear power stations.
Built to ASME Section III, it meets the requirements of advanced pressurized water reactors.
• Ease of maintenance resulting from a removable four-piece spacer coupling that SPECIFICATIONS
allows easy access to the bearing and mechanical seal Flows to: 900 m3/h (4000 gpm)
• Extended seal and bearing life ensured by a heavy-duty motor support head that Heads to: 245 m (800 ft)
dampens vibration Press. to: 41 bar (600 psi)
• Reliability due to a cartridge-type, single mechanical seal with integral disaster Temp: to 205°C (400°F)
bushing plus tungsten carbide and carbon seal faces
IDP • Reduced maintenance costs through a robust rotor with a large shaft diameter
and tapered fit t the coupling hub to reduce deflection and vibr tion at flowse ve.com/library.
flowserve.com 77
SPECIALTY PRODUCTS
Increase Production With the IOT

Flowserve is helping clients achieve step-change increases in production
by applying industrial internet principles, technologies and related
reliability services to pumps and rotating equipment. By developing
scalable systems that capture and make sense of equipment
data, Flowserve can offer a practical and economical solution
for predictive versus reactive maintenance.
NUCLEAR
CN
Radially split, single-stage, double-suction, high-speed pump that features a rugged diffuser-style barrel design
engineered to meet ASME Section IV Division 1 requirements for commercial nuclear power plants.
• Ease of maintenance facilitated by replaceable casing wear rings that enable running SPECIFICATIONS
clearances to be renewed easily Flows to: 5100 m3/h (22 500 gpm)
• Lower operating costs provided by precision-cast chrome steel impellers, which ensure Heads to: 750 m (2460 ft)
hydraulic efficien y and performance repeatability Press. to: 120 bar (1740 psi)
• Reduced downtime facilitated by 416 stainless steel shaft, which is ground in steps to Temp: to 206°C (402°F)
minimize stresses and stress relieved in the vertical position to prevent warping
NUCLEAR
CA
Radially split, between-bearing, multistage barrel pump designed to comply with ASME Section III Class 2 and 3 for
nuclear safety injection and emergency feedwater service.
• Increased MTBR with precision-cast diffusers, which minimize bearing spans SPECIFICATIONS
• Increased reliability provided by serrated impeller running fits th t reduce effects Flows to: 5225 m3/h (23 000 gpm)
of rotor contact during system upsets or turning gear operation Heads to: 4300 m (14 000 ft)
• Ease of maintenance provided by casing rings that enable running clearances to Press. to: 517 bar (7500 psi)
be renewed easily Temp: to 250°C (480°F)
• Installation flexibility wing to suction and discharge connections that can be on
the top or bottom of the barrel with flanged or weld-end design
VALVES || SPECIALTY
PUMPS
NUCLEAR
RLIJ
LINEAR CONTROL
Reliable nuclear pump designed to handle low-fl w and high-speed operations, frequent starts and stops, and
operating upsets for prolonged pump life.
• Increased uptime provided by metal-to-metal discharge head and bearing housing, SPECIFICATIONS
which provide improved rigidity for enhanced rotor and stator internal alignment Flows to: 109 m3/h (480 gpm)
• Longer service life via high-strength CA625 shafting, which offers higher Heads to: 1270 m (4160 ft)
PRODUCTS
endurance limits, increased ductility and improved corrosion resistance Press. to: 51 bar (2200 psi)
Pacifi • Lower operating costs with optimized impellers and diffusers, which provide Temp: to 250°C (480°F)
hydraulic efficien y and reduce power consumption
• Ease of installation and maintenance made possible by optional PTO cartridge Refer to literature PS-80-1
seal, an integral sleeve and pumping ring for enhanced self-aligning capabilities at flowse ve.com/library.
NUCLEAR
CAM
Double-casing, multistage diffuser pump for PWR chemical and volume control charging or BWR control rod
drive applications. Can be supplied in compliance with ASME Section lll, Class 3 or RCC-M where required.
• Improved low-fl w stability and reliability across a wide range of fl ws via modular SPECIFICATIONS
impeller design that limits surging and pulsations Flows to: 60 m3/h (265 gpm)
• Lower operating costs from ball-ball bearing arrangement that doesn’t require Heads to: 1920 m (6300 ft)
external, force-fed lube oiling system or cooling Press. to: 200 bar (3000 psi)
• Reduced maintenance requirements enabled by dry disk spacer coupling that Temp: to 120°C (250°F)
facilitates component servicing
IDP
NUCLEAR
EG
Reliable single-stage, double-suction, radially split case, heavy-duty process pump specifically designed for component
cooling water service in nuclear power plants. Conforms to ASME Section lll, Class 3 and RCC-M.
• Equal thermal expansion enabled by centerline mounted design SPECIFICATIONS

• Exceeds piping requirement by twofold via suction and discharge flange connections Flows to: 4000 m3/h (17 610 gpm)
in the top portion of the pump case Heads to: 60 m (200 ft)
• Reduced NPSHR over the operating range of the pump through double-suction Press. to: 14 bar (200 psi)
impeller design Temp: to 80°C (180°F)
• Lower maintenance costs with standard cartridge seals and a radially split casing,
which allows access without having to disconnect suction and a discharge piping Refer to literature FPD-2
IDP
flowserve.com 79
SPECIALTY PRODUCTS
NUCLEAR
MEV
Bottom-suction, side-discharge vertical pump equipped with a mechanical seal and grease-lubricated bearings for use in
water services in nuclear power plants. Conforms to ASME Section lll, Class 3 and RCC-M.
• Extended service life from roller guide bearing above the seal design that minimizes SPECIFICATIONS
motor vibration to the seal Flows to: 5400 m3/h (23 760 gpm)
• Functional qualific tions per bottom-suction and side-discharge connections designed Heads to: 50 m (160 ft)
to meet specified piping requirement Press. to: 14 bar (200 psi)
• Lower maintenance costs via spacer coupling that facilitates bearing and seal Temp: to 80°C (180°F)
Flowserve replacement without removal of motor
Refer to literature FPD-2
NUCLEAR
LBSZ
Sealless liquid ring vacuum systems with canned motors engineered for degassing of water within the primary loop
of the reactor.
• Environmental and regulatory compliance and personnel safety ensured by the SPECIFICATIONS
leak-free canned design guaranteed to 10-6 mbar/l/sec Flows to: 400 m3/h (235 cfm)
• Extended uptime via extremely robust suction and discharge casing constructed Suct. Press. to: 125 mbar (94 torr)
from forged steel and designed to meet highest seismic requirements to atmosphere
• Reliable performance facilitated by long MTBF, which includes no oscillating parts, Des. Press. to: 12 bar (174 psi)
non-contacting parts and no axial thrust Temp: to 100°C (212°F)
SIHI
NUCLEAR
KBSZ
Sealless liquid ring compressor systems with canned motors designed to extract waste radioactive gas from a
nuclear island and deliver it to a treatment system.
leak-free canned design guaranteed to 10-6 mbar/l/sec Flows to: 250 m3/h (147 cfm)
• Extended uptime via extremely robust suction and discharge casing constructed Comp. Press. to: 8 bar (116 psi)
from forged steel and designed to meet highest seismic requirements Des. Press. to: 30 bar (435 psi)
• Reliable performance facilitated by long MTBF, which includes no oscillating parts, Temp: to 100°C (212°F)
SIHI non-contacting parts and no axial thrust
VALVES || SPECIALTY
PUMPS
NUCLEAR
KSCZ
LINEAR CONTROL
Sealless liquid systems with side channel or centrifugal hydraulics in canned motor or magnetic coupling design
used for different applications in nuclear power plants.
leak-free canned design guaranteed to 10-6 mbar/l/sec Flows to: 650 m3/h (2860 gpm)
• Extended uptime via extremely robust suction and discharge casing constructed Heads to: 350 m (1250 ft)
PRODUCTS
from forged steel and designed to meet highest seismic requirements Press. to: 80 bar (1160 psi)
• Reliable performance facilitated by long MTBF, which includes no oscillating parts, Temp: to 180°C (356°F)
non-contacting parts and no axial thrust
SIHI
Profit From Our Expertis

Flowserve pump training programs help plant operators, reliability
specialists, engineers and maintenance personnel deepen their
understanding of pumping systems. Attendees learn how
to maximize plant availability, improve pump reliability and
increase mean time between repair, all of which positively
impact the bottom line. Courses are available at our global
network of Learning Resource Centers, online and even
on-site. Get details at www.pumptraining.com.
HYDRAULIC DECOKING SYSTEMS
Hydraulic Decoking Systems

Installed in more than 95% of the world’s DCUs, Flowserve hydraulic decoking systems are the world’s most advanced.
They provide refiners with maximized unit output increased unit reliability and unparalleled personnel safety.
• Increased unit capacity and efficien y with automated hydraulic decoking systems that MAJOR SYSTEMS
include virtually all equipment needed to operate and control the process • ISO 13709/API 610 (BB5) jet
• Significantly improved oper tor safety with remote and automated system options, pumptrain
including AutoShift™ combination cutting tool, cutting tool enclosure, fully integrated • Coke cutting system
instrumentation feedback and coke drum monitoring • Automation, controls and
• Increased unit uptime with online assurance programs that enable experts to monitor, instrumentation
Flowserve diagnose and communicate operating solutions in real time
• Access to extensive aftermarket support Refer to literature PS-90-6 and
PS-90-22 at flowse ve.com/library.
flowserve.com 81
SPECIALTY PRODUCTS
ENERGY RECOVERY DEVICE
ERT
Highly efficient and reliable Calder energy recovery turbines (ERT) are installed in nearly 1000 seawater and brackish
water reverse osmosis plants worldwide, with a total installed capacity in excess of 350 MW.
• Highly efficient ener y recovery over a wide range of operating pressures due to SPECIFICATIONS
fl t efficien y curve Brine Flows to: 1200 m3/h (5280 gpm)
• Repeatable performance due to adjustable nozzle assembly that allows the Efficien y: to 90%
original operating conditions to be re-established quickly Pressure to: 80 bar (1160 psi)
• Reduced downtime enabled by horizontal split-case design, which provides easy
access for rotor inspection without disturbing alignment Refer to literature FPD-18
• Installation ease with standard ANSI discharge; DIN flange discharge vailable at fl wserve.com/library.
Calder™
• Corrosion-resistant, super duplex stainless steel or FRP construction for long life
ENERGY RECOVERY DEVICE
DWEER
The Dual Work Exchanger Energy Recovery (DWEER) is the most efficient ener y recovery technology available today.
No other technology achieves higher efficien y or lower SWRO plant operating costs.
• Unmatched operational flexibility resulting from a robust isobaric design th t SPECIFICATIONS

tolerates fluctu tions in fl w and pressure with no loss of performance Brine Flows to: 350 m3/h (1.4 MGD)
• Precise control of the energy transfer mechanism due to the LinX™ valve per unit
Calder • Reduced construction costs, as the DWEER uses only a basic header design, plus Efficien y: to 98%
its footprint and associated piping runs are easily optimized for the site Pressures: 82 bar (1200 psi)
• Lower operating costs, since special flushing procedures strainers or filtr tion
systems are not needed Refer to literature FPD-18
• Quiet operation so noise hoods or enclosures are not needed at flowse ve.com/library.
THRUSTER
WFSD
Pleuger thrusters are tough, versatile, custom-engineered propulsion units for ship and offshore use. Able to apply thrust in
any direction, they are robustly engineered to provide long operating life and fail-safe performance.
• Improved performance with 97° tilted propeller axis and nozzle, which delivers up to APPLICATIONS
25% more thrust than 90° arrangements • Semi-submersible rigs
• Increased time between periodic special class surveys enabled by available online • FPSOs
condition monitoring systems • Drill ships
• Reduced maintenance costs resulting from the unit’s ability to be mounted and • Crane and pipelay vessels
dismantled underwater without dry-docking • Research and other offshore ships
Pleuger
• Aftermarket support from 24/7 worldwide service network Refer to literature PS-90-51
VALVES || SPECIALTY
PUMPS
CONCRETE VOLUTE
CVP (BSV and BCV)
LINEAR CONTROL
Made of prefabricated concrete segments for the volute housing and intake suction bell, CVP pumps are used in a
variety of high-capacity water applications in water resources, power generation and desalination.
• Reduced total lifecycle costs with concrete construction, which substantially SPECIFICATIONS
reduces vibration and maintenance Flows to: 200 000 m3/h (880 000 gpm)
• Significantly l wer construction time and costs due to compact, prefabricated Heads to: 60 m (197 ft); custom designs
PRODUCTS
elements that reduce excavation work as compared to wet-pit pumps to 90 m (295 ft)
• Easy inspection access through manholes; no dismantling necessary
• Efficient vortex-free oper tion with no dead water areas or sand deposits Refer to literature FPD-18
Flowserve • Corrosion-resistant concrete construction with the impeller, wear ring and cover at flowse ve.com/library.
being the only metallic wetted components
P O LY O L E F I N R E A C T O R
AFH9500
Developed specifically for loop reactor circul tion, the AFH9500 high-pressure axial fl w pump delivers increased
plant productivity, earning it a well-earned reputation as the industry’s preferred pump for polyolefin production
• Superior process control provided by propellers engineered with steep pump head SPECIFICATIONS
curves to ensure performance requirements are met Flows to: 18 180 m3/h (80 000 gpm)
• Unspared pump reliability ensured by conservatively engineered bearing system plus Heads to: 40 m (131 ft)
high-pressure elbow casing designed, fabricated and tested per ASME Boiler and Press. to: 100 bar (1450 psi)
Pressure Vessel Code, Section VIII, Division 1 and applicable international standards Temp: -45°C to 349°C
• Added safety and uptime with standard triple-seal arrangement and API Plan (-49°F to 660°F)
Lawrence Pumps 32/53C/52 seal support system
flowserve.com 83
84
SEALS
SEALS
The applications just keep getting tougher. Standard Cartridge . . . . . . . . . . . . . . . . 86
Higher pressures and temperatures. Highly Pusher. . . . . . . . . . . . . . . . . . . . . . . . . . 90
Metal Bellows . . . . . . . . . . . . . . . . . . . . 98
corrosive and erosive fluid . But Flowserve
Mixer. . . . . . . . . . . . . . . . . . . . . . . . . . 104
continues to redefine the way mechanical
Compressor Seals and Systems. . . 108
seals operate by developing some of the
Slurry. . . . . . . . . . . . . . . . . . . . . . . . . . 114
most advanced seal modeling, design, and
Gas Barrier and Containment. . . . 118
manufacturing capabilities in the world.
OEM and Special Duty . . . . . . . . . . . . 122
These pioneering techniques have led Seal Support Systems. . . . . . . 128
to sophisticated seal face topographies Accessories. . . . . . . . . . . 134
and innovative microfeatures that can be
designed to boost your bottom line by
enhancing fluid film, eating lift, reducing
friction, minimizing emissions, and
reducing wear. All of this makes Flowserve
seals the industry’s top choice for the most
demanding environments. The success
of your application isn’t just about seal
design. It also depends on selecting the
right model, design options, materials,
arrangements, and piping plans. Flowserve
engineers make sure you have the most
appropriate seal and sealing system to
ensure high reliability, long life and low
total cost of ownership.
flowserve.com 85
ISC2 Series
86
SEALS | STANDARD CARTRIDGE
STANDARD CARTRIDGE
Nonstop operation. Off-design operation. Frequent stops and starts. No matter how
hard you run your system, Flowserve ISC2 standard cartridge seals are up to the task.
They’re versatile enough to support hundreds of pump models from global manufacturers
while meeting all international standards (ASME, DIN, ISO, JIS, and others). You’ll also
keep costs low with easy installation, less inventory, greater flexibility, less downtime and
longer service life.
Standard Cartridge – Quick Reference

Product Sub-Type Pressures to Temperatures Speeds to Sizes
Industrial 20.6 bar -40°C to 204°C 23 m/s 25 to 200 mm

ISC2 Process (300 psi) (-40°F to 400°F) (75 fps) (1.000 to 8.000 in)
API 20.6 bar -40°C to 204°C 23 m/s 25 to 200 mm

ISC2-682 Process (300 psi) (-40°F to 400°F) (75 fps) (1.000 to 8.000 in)
Mixer 6.9 bar -40°C to 204°C 1.1 m/s 25 to 200 mm

ISC2-MW Equipment (100 psi) (-40°F to 400°F) (3.5 fps) (1.000 to 8.000 in)
flowserve.com 87
STANDARD CARTRIDGE
INDUSTRIAL PROCESS
ISC2
The ISC2 Series provides exceptional reliability and standardization over a wide variety of industrial applications and
equipment. Available in single and dual arrangement, pusher and metal bellows types.
• Lower total cost of ownership from advanced seal design features that enable SPECIFICATIONS
superior reliability Press: pusher to 20.6 bar (300 psi);
• Broad application flexibility assured by comprehensive range of pre-engineered bellows to 13.8 bar (200 psi)
configur tions and materials; custom solutions also available Temp: -40°C to 204°C (-40°F to 400°F)
• Reduced operating costs via standardization to ISC2 Series, which enables less Speeds to: 23 m/s (75 fps)
inventory, greater flexibilit , less downtime and longer seal life Sizes: pusher 25 to 200 mm
• Increased plant and personnel safety delivered by cartridge security and (1.000 to 8.000 in);
compliance with all major international standards bellows to 95 mm (3.750 in)
Refer to literature FSD243
API PROCESS
ISC2-682
The ISC2-682 Series is the versatile ISC2 family of pusher and metal bellows seals engineered to fully comply with
the design and qualific tion requirements of API 682.
• Compliance with the sealing industry’s most comprehensive best practices SPECIFICATIONS
standard assured by machined from bar stock glands, captured gland O-ring and Press: pusher to 20.6 bar (300 psi);
thick sleeves bellows to 13.8 bar (200 psi)
• API 682 Category 2 met by adding multiport flush and fl ting throttle bushing Temp: -40°C to 204°C (-40°F to 400°F)
• Application flexibility assured by designs configurable as eithe Type A pusher seal Speeds to: 23 m/s (75 fps)
or Type B metal bellows seal in Arrangements 1, 2 and 3 Sizes: pusher 25 to 200 mm
• Ideally suited for ASME B73.1 pumps and light-duty API 610 pumps within plants (1.000 to 8.000 in);
that adopt the API 682 standard bellows to 95 mm (3.750 in)
MIXER EQUIPMENT
ISC2-MW
The ISC2-MW is a dual arrangement, standard cartridge pusher seal engineered for reliable, cost-effective operation
in mixer service.
• Reduced installation and maintenance costs assured by economical cartridge seal SPECIFICATIONS
designed for top- entry installation Press. to: 6.9 bar (100 psi)
• Increased uptime resulting from volute groove, which significantly increases Temp: -40°C to 204°C (-40°F to 400°F)
barrier fluid flow to promote cool running, even at mixer speeds Speeds to: 1.1 m/s (3.5 fps)
• Reliable operation ensured by ISC2 thermal management technology that allows Sizes: 25 to 200 mm
the seal to run cooler and tolerate dry-running events (1.000 to 8.000 in)
SEALS
VALVES | | STANDARD CARTRIDGE
LINEAR CONTROL
89
flowserve.com
HSH
90
SEALS | PUSHER
PUSHER
Popular for their cost-effective versatility, you’ll find Flowserve pusher seals in a wide
variety of applications and industries. From general services and light hydrocarbons
to high-pressure and high-speed applications, Flowserve pusher seals provide the
extended reliability and rugged durability you can count on. Even after years of
operation, Flowserve pusher seals have a proven reputation for easy repairs that
return them to service quickly.
Pusher – Quick Reference*

ISC2-PX,ISC2–XP,
ISC2-682PX and Process (300 psi) (-40°F to 400°F) (75 fps) (1.000 to 8.000 in)
ISC2-682XP
ISC2-PP and Industrial 20.6 bar -40°C to 204°C 23 m/s 25 to 200 mm

ISC2-682PP Process (300 psi) (-40°F to 400°F) (75 fps) (1.000 to 8.000 in)
QB, QBS Industrial 51.7 bar -40°C to 204°C 23 m/s 12.7 to 139.7 mm
and QBU Process (750 psi) (-40°F to 400°F) (75 fps) (0.500 to 5.500 in)
Industrial 27.6 bar -40°C to 204°C 23 m/s 14.1 to 148 mm

UC and UCQ Process (400 psi) (-40°F to 400°F) (75 fps) (0.566 to 5.838 in)

RO Process (300 psi) (-40°F to 500°F) (75 fps) (0.375 to 4.500 in)

CRO Process (300 psi) (-40°F to 500°F) (75 fps) (0.375 to 4.500 in)
Industrial 25 bar -40°C to 220°C 23 m/s 10 to 100 mm

Europac Series Process (360 psi) (-40°F to 430°F) (75 fps) (0.394 to 3.940 in)

RA and RA-C Process (400 psi) (-40°F to 350°F) (75 fps) (0.500 to 5.000 in)
flowserve.com 91
Pusher – Quick Reference, cont‘d.
QBQ API 51.7 bar -40°C to 204°C 23 m/s 12.7 to 139.7 mm

and QBQ LZ Process (750 psi) (-40°F to 400°F) (75 fps) (0.500 to 5.500 in)
QBB API 51.7 bar -40°C to 204°C 23 m/s 20 to 121 mm

and QB2B Process (750 psi) (-40°F to 400°F) (75 fps) (0.787 to 4.750 in)
API 103 bar -40°C to 260°C 46 m/s 25.4 to 156 mm

HSH Process (1500 psi) (-40°F to 500°F) (150 fps) (1.000 to 6.125 in)
UO Pipeline 103.4 bar -40°C to 204°C 23 m/s 14.1 to 148 mm

and UOP Process (1500 psi) (-40°F to 400°F) (75 fps) (0.566 to 5.838 in)
D High-Energy 103.4 bar -73°C to 343°C 23 m/s 13.4 to 137 mm

and DP Process (1500 psi) (-100°F to 650°F) (75 fps) (0.525 to 5.400 in)
UHTW High-Energy 207 bar -40°C to 371°C 76 m/s 25.4 to 228.6 mm

and DHTW Process (3000 psi) (-40°F to 700°F) (250 fps) (1.000 to 9.000 in)
VALVES | | PUSHER
SEALS
INDUSTRIAL PROCESS
ISC2-PX, ISC2–XP, ISC2-682PX and ISC2-682XP
LINEAR CONTROL
The ISC2-PX single cartridge pusher seal brings superior reliability to ASME, ISO and JIS pumps used in chemical,
power, water, pulp and paper, and general industries. ISC2-682 versions provide full API 682 compliance.
• Increased reliability with thermal management technology that runs cooler SPECIFICATIONS
in suboptimal conditions such as short-term dry running events Press. to: 20.6 bar (300 psi)
• Longer service life enabled by corrosion-resistant design and drive Temp: -40°C to 204°C (-40°F to 400°F)
mechanisms that reduce wear in high-vibration applications Speeds to: 23 m/s (75 fps)
• Comprehensive range of pre-engineered configur tions with standard Sizes: 25 to 200 mm (1.000 to 8.000 in)
flush (PX) Plan 23 cooling (XP); custom solutions available
• Increased safety delivered by throttle bushing with standard quench and Refer to literature FSD243
drain for safe containment in the unlikely event of seal failure at flowse ve.com/library.
INDUSTRIAL PROCESS
ISC2-PP and ISC2-682PP

These dual cartridge pusher seals from the versatile ISC2 Series bring superior reliability to ASME, ISO, JIS and API
pumps used in chemical, power, water, oil and gas, and other industries.
• Reliable operation resulting from advanced volute groove design and internal SPECIFICATIONS
circulating devices that promote cool running Press. to: 20.6 bar (300 psi)
• Longer service life via a stationary face support drive mechanism that reduces Temp: -40°C to 204°C (-40°F to 400°F)
wear in applications with high vibration levels, and springs and pins outside Speeds to: 23 m/s (75 fps)
the process for reduced corrosion and clogging Sizes: 25 to 200 mm (1.000 to 8.000 in)
• Application flexibility with double-balanced seal face geomet y, allowing both
pressurized and unpressurized operation; ISC2-682PP provides full API 682 Refer to literature FSD243
compliance at flowse ve.com/library.
INDUSTRIAL PROCESS
QB, QBS and QBU

QB Series balanced pusher seals are ideal for medium-duty applications in power and industrial applications.
• Greater reliability and installation ease assured by rugged components, SPECIFICATIONS

heavy-duty seal faces and cartridge seal configur tion Press. to: 51.7 bar (750 psi)
• Combat dirty services with the clog-resistant large cross-section, single coil Temp: -40°C to 204°C (-40°F to 400°F)
spring in the QBS seal Speeds to: 23 m/s (75 fps)
• Handle low lubricity hot water without the need for auxiliary cooling systems Sizes: 12.7 to 139.7 mm
with the QBU seal (0.500 to 5.500 in)
• Choice of throttle bushing design: fixed flo ting or segmented for safe
equipment operation Refer to literature FSD152
flowserve.com 93
PUSHER
INDUSTRIAL PROCESS
UC and UCQ
The UC Series is a balanced pusher seal with a substantial single coil spring that provides exceptional performance in
refine y, pipeline and petrochemical services.
• Extended service life in heavy-duty applications assured by rugged single pusher seal SPECIFICATIONS
with thick cross-section components Press. to: 27.6 bar (400 psi)
• Increased reliability via large, low spring rate single coil spring that tolerates axial Temp: -40°C to 204°C (-40°F to 400°F)
setting dimensions while reducing opportunity for clogging and hang-up from solids Speeds to: 23 m/s (75 fps)
• Consistent seal face contact provided by robust U-cup seal and spring holder Sizes: 14.1 to 148 mm
• Low-emissions performance enabled by silicon carbide rotating face mounted on (0.566 to 5.838 in)
graphite ring, preventing shrink fit distortions and sustaining a flat seal face
INDUSTRIAL PROCESS
RO
This single, unbalanced, multi-spring component seal is usable as an inside or outside mounted seal. Suitable for abrasive,
corrosive and viscous fluids in chemical se vices.
• Increased durability from robust rotating spring compression unit that helps to keep SPECIFICATIONS
solids away from the seal faces and removes seal-generated heat Press. to: 20.7 bar (300 psi)
• Improved reliability with rotating seal ring that is independently centered on the shaft Temp: -40°C to 260°C (-40°F to 500°F)
and has multiple springs and drive pins that evenly distribute the load Speeds to: 23 m/s (75 fps)
• Broad application flexibility enabled by completely interchangeable shaft packing Sizes: 9.5 to 115 mm
materials, dimensionally interchangeable insert mounting, and compression unit (0.375 to 4.500 in)
availability in any machinable metallurgy
INDUSTRIAL PROCESS
CRO
The CRO is an economical, single-coil spring, friction drive component seal for use in pumps with packing box seal
chambers. Available in single or dual arrangements.
• Longer service life derived from rotating seal ring that self-centers around the shaft SPECIFICATIONS
and withstands the harsh demands of cyclic operation or continuous duty Press. to: 20.7 bar (300 psi)
• Increased durability from robust single-coil spring that resists clogging and Temp: -40°C to 260°C (-40°F to 500°F)
chemical attack Speeds to: 23 m/s (75 fps)
• Simplified install tion and improved corrosion resistance due to a design with a Sizes: 9.5 to 115 mm
minimum number of seal components with heavy cross-sections (0.375 to 4.500 in)
VALVES | | PUSHER
SEALS
INDUSTRIAL PROCESS
Europac Series
LINEAR CONTROL
Europac single, wavy spring seals are designed for ISO pumps in a wide range of duties in chemical and general
industries. Designed according to metric DIN EN 12 756 standard to L1k.
• Longer service life assured by rigid, corrosion-resistant retainer with or without SPECIFICATIONS
integrated pumping thread Press. to: 25 bar (360 psi)
• Increased reliability delivered by X-spring with anti-axial displacement and rigid Temp: -40°C to 220°C (-40°F to 430°F)
PTFE or elastomers for secondary sealing Speeds to: 23 m/s (75 fps)
• Broad application versatility provided by multiple arrangements, including Sizes: 10 to 100 mm
standard design (600), balanced stepped shaft (610) and hot water services (0.394 to 3.940 in)
without cooling (615)
INDUSTRIAL PROCESS
RA and RA-C
With its composite rotor, the RA single outside-mounted component seal is a cost-effective solution for highly
corrosive chemical services. Suitable for metallic and nonmetallic equipment, such as plastic, glass and lined designs.
• Installation ease with design that attaches to the outside of the seal chamber SPECIFICATIONS
• Corrosive application performance and flexibility provided by seal faces and Press. to: 27.6 bar (400 psi)
elastomers in diverse materials, plus non-wetted drive collar, springs and drive Temp: -40°C to 177°C (-40°F to 350°F)
pins on the RA-C configur tion to avoid the need for expensive alloys Speeds to: 23 m/s (75 fps)
• Greater reliability assured by flexible rotor design hydraulically balanced to Sizes: 13 to 127 mm
provide proper face loading (0.500 to 5.000 in)
• Better process control via double O-ring mounted stator that prevents distortion
Learn to Visually Identify Seal Failures

Troubleshoot seal failures with the Flowserve Seal Failure Analysis
app. This tool is an invaluable resource for maintenance personnel
and reliability engineers tasked with maximizing equipment uptime.
You’ll learn the tell-tale signs for visually identifying more than
60 seal failure modes plus typical causes and options for
prevention. You can also get a second opinion from a Flowserve
seal expert, locate nearby Quick Response Centers, access
handy reference materials and watch seal-related videos.
Find it at www.sealfailureapp.com.
flowserve.com 95
PUSHER
API PROCESS
QBQ and QBQ LZ

This medium- to high-pressure seal features a high balance face that meets the lowest light hydrocarbon emissions
level: less than 500 ppm. Designed to suppress flashing and minimize he t generation.
• Satisfies all API 682 design and qualific tion test requirements for single and dual SPECIFICATIONS
Arrangement 1 and 2 seals Press. to: 51.7 bar (750 psi)
• Extended equipment reliability with optimal face cooling and reduced distortion Temp: -40°C to 204°C (-40°F to 400°F)
from available multiport injection Speeds to: 23 m/s (75 fps)
• Safety and environmental compliance assured by dual seal arrangement, which Sizes: 12.7 to 139.7 mm
provides safety backup and emissions control in hazardous services (0.500 to 5.500 in)
• Handle low vapor pressure margin with the QBQ LZ seal, featuring wave pattern
precision face topography to minimize heat generation and seal face wear Refer to literature FSD152 and
FSD216 at flowse ve.com/library.
API PROCESS
QBB and QB2B

Engineered to handle reverse pressurization, the QBB and QB2B dual pressurized pusher seals are capable of zero
emissions. Provides full range pressure capability for API 682 Arrangement 3 requirements.
• Increased durability from ability to handle reverse pressurization upsets with SPECIFICATIONS
capabilities that far exceed conventional balanced seals Press. to: 51.7 bar (750 psi)
• All parts are mechanically or hydraulically retained in place, regardless of the direction Temp: -40°C to 204°C (-40°F to 400°F)
of pressurization Speeds to: 23 m/s (75 fps)
• Environmental compliance with design optimized for pressurized barrier flui Sizes: 20 to 121 mm
• Low to moderate pressures are handled by the QBB face-to-back configur tion (0.787 to 4.750 in)
• Moderate and high pressures, including Piping Plan 53B, are handled by the QB2B
back-to-back configur tion Refer to literature FSD152
API PROCESS
HSH
HSH balanced, flexible st tor cartridge seals are built for extended reliability in high-pressure, high-speed and highly
viscous services such as crude oil pipeline pumps. Fully compliant with API 682 Type A, Arrangements 1, 2 and 3.
• Extended service life via high torque-capable, anti-rotation lugs that minimize SPECIFICATIONS
distortion and wear Press. to: 103 bar (1500 psi)
• Greater efficien y from standard distribution ring connected to the seal’s flush port Temp: -40°C to 260°C (-40°F to 500°F)
which improves cooling efficien y by injecting flush flow 360° around seal faces Speeds to: 46 m/s (150 fps)
• Reliable high-speed operation and improved tolerance of misalignment enabled by Sizes: 25.4 to 156 mm
flexible st tor design with Alloy C-276 springs (1.000 to 6.125 in)
• Decreased inventory costs and increased design flexibility wing to parts
interchangeability between single and dual seal arrangements Refer to literature FSD156
VALVES | | PUSHER
SEALS
PUSHER
UO and UOP
LINEAR CONTROL
The UO Series is a balanced pusher seal based on the UC Series with high-pressure features. UO Series seals
are well-suited for demanding refine y, pipeline and petrochemical services.
• Extended service life in high-pressure, heavy-duty applications assured by rugged SPECIFICATIONS

single pusher seal with thick cross-section components Press. to: 103.4 bar (1500 psi)
• Increased reliability via large, low spring rate single coil spring that tolerates axial Temp: -40°C to 204°C (-40°F to 400°F)
setting dimensions while reducing clogging and hang-up from solids Speeds to: 23 m/s (75 fps)
• High-pressure performance enabled by engineering the seal face mounting to (0.566 to 5.838 in)
prevent distortions under all load conditions
HIGH-ENERGY PROCESS
D and DP
D Series single spring, balanced pusher seals have a high-circulation integral pumping ring to ensure proper
cooling. Ideal for high-temperature boiler feed water and hot hydrocarbon services.
• Cost-effective operation ensured by integrated pumping ring that eliminates the SPECIFICATIONS
expense of cool injection systems Press. to: 103.4 bar (1500 psi)
• Greater reliability due to the rotating face that remains fl t under all conditions for Temp: -73°C to 343°C (-100°F to 650°F)
very low leakage Speeds to: 23 m/s (75 fps)
• Superior high-temperature performance enabled by large, low spring rate single (0.525 to 5.400 in)
coil spring that tolerates axial setting variations
HIGH-ENERGY PROCESS
UHTW and DHTW

These high-speed, high-pressure balanced pusher seals are custom-engineered for high-energy applications
such as boiler-feed process barrel pumps.
• Unmatched performance and extended seal life derived from FEA-designed seal SPECIFICATIONS
faces that boast zero net deflection from thermal hydraulic, and dynamic forces Press. to: 207 bar (3000 psi)
• Superior high temperature, slow roll, and hot standby operation enabled by high Temp: -40°C to 371°C (-40°F to 700°F)
performance circulating features that deliver optimum cooling at all operating speeds Speeds to: 76 m/s (250 fps)
• Reliable operation in high speed services achieved via precisely controlled seal Sizes: 25.4 to 228.6 mm
face balance ratio and robust drive engagement (1.000 to 9.000 in)
• Extended equipment uptime with available secondary containment options
flowserve.com 97
BXRH
SEALS | METAL BELLOWS
METAL BELLOWS
Flowserve metal bellows seals provide proven reliability and long-term performance in
general and critical services, whether you’re dealing with hazardous chemicals or refinery
processing. Edge-welded, high-alloy bellows get the job done where corrosive chemicals
degrade elastomers and other dynamic gaskets. Available with rotating or stationary bellows
and in single, dual unpressurized or dual pressurized configurations, our global customers
will find a variety of arrangements to meet their toughest sealing requirements, including
full API 682 compliance.
Metal Bellows – Quick Reference

ISC2-BX, ISC2-XB,
ISC2-682BX and Process (200 psi) (-40°F to 400°F) (75 fps) (1.000 to 3.750 in)
ISC2-682XB

ISC2-BB Process (200 psi) (-40°F to 400°F) (75 fps) (1.000 to 3.750 in)

BXLS Process (400 psi) (-40°F to 400°F) (75 fps) (0.623 to 3.937 in)
BX, BXQ API 27.6 bar 40°C to 204°C 23 m/s 12.3 to 127 mm
and BXB Process (400 psi) (-40°F to 400°F) (75 fps) (0.483 to 5.000 in)
API 20.7 bar -73°C to 427°C 46 m/s 21.8 to 127 mm

BXRH Process (300 psi) (-100°F to 800°F) (150 fps) (0.857 in to 5.000 in)
BXHHS and API 20.7 bar -73°C to 427°C 23 m/s 28.2 to 128.9 mm
BXHHSB Process (300 psi) (-100°F to 800°F) (75 fps) (1.110 in to 5.073 in)
BRC API 20.7 bar -73°C to 427°C 23 m/s 28.2 to 150 mm

and BRCSH Process (300 psi) (-100°F to 800°F) (75 fps) (1.110 to 5.906 in)
flowserve.com 99
METAL BELLOWS
INDUSTRIAL PROCESS
ISC2-BX, ISC2-XB, ISC2-682BX and ISC2-682XB

Single cartridge metal bellows seals from the versatile ISC2 Series, the ISC2-BX and ISC2-XB are ideal for a wide range of
chemical and industrial applications. ISC2-682 versions provide full API 682 compliance.
• Outstanding corrosion resistance with edge-welded Alloy C-276 bellows SPECIFICATIONS

• Reduced hang-up due to self-cleaning rotating bellows design that maintains Press. to: 13.8 bar (200 psi)
excellent seal face loading Temp: -40°C to 204°C (-40°F to 400°F)
• Improved tolerance to dry running events with exclusive thermal management Speeds to: 23 m/s (75 fps)
technology Sizes: 25 to 95 mm (1.000 to 3.750 in)
• Broad application flexibility assured by comprehensive range of pre-engineered
configur tions with standard flush (BX) Plan 23 cooling (XB) and API 682 compliance Refer to literature FSD243
• Increased safety via throttle bushing with standard quench and drain at flowse ve.com/library.
INDUSTRIAL PROCESS
ISC2-BB and ISC2-682BB

This dual cartridge metal bellows seal from the versatile ISC2 Series provides a reliable barrier against process leakage in
chemical and industrial applications. The ISC2-682 BB provides full API 682 compliance.
• Reliable operation resulting from advanced volute groove design and internal SPECIFICATIONS
circulating devices that promote cool running Press. to: 13.8 bar (200 psi)
• High uptime with corrosion-resistant, edge-welded Alloy C-276 bellows Temp: -40°C to 204°C (-40°F to 400°F)
• Reduced hang-up due to self-cleaning rotating bellows design Speeds to: 23 m/s (75 fps)
• Application flexibility with tandem and double-balanced arrangements to all w Sizes: 25 to 95 mm (1.000 to 3.750 in)
both pressurized and unpressurized operation
• Meets all major international standards and fits hundreds of pump models from Refer to literature FSD243
global manufacturers at flowse ve.com/library.
INDUSTRIAL PROCESS
BXLS
The BXLS is a metric-sized rotating metal bellows seal for corrosive and non-corrosive services, especially those that
crystallize. Meets the seal chamber dimensions specified by DIN EN 12 756 L1k
• Metric seal interface dimensions ideal for pumps conforming to various DIN and SPECIFICATIONS
ISO standards, including DIN 24960 and ISO 3069 Press. to: 27.6 bar (400 psi)
• Installation flexibility afforded by cartridge or non-cartridge seal configu tions to Temp: -40°C to 204°C (-40°F to 400°F)
fit the seal chamber dimensional requirements Speeds to: 23 m/s (75 fps)
• Reduced maintenance costs due to the absence of springs and dynamic Sizes: 16 to 100 mm (0.623 to 3.937 in)
elastomers to lessen clogging vulnerabilities
• Longer service life with 0.20 mm (0.008 in) thick standard welded metal bellows Refer to literature FSD109
for extended resistance to corrosion, vibration and centrifugal forces at flowse ve.com/library.

API PROCESS
BX, BXQ and BXB

BX Series balanced rotating metal bellows seals provide exceptional reliability in corrosive and non-corrosive fluids
especially those that crystallize. Fully compliant with API 682 Type B, Arrangements 1, 2 and 3.
• Longer service life with 0.20 mm (0.008 in) thick standard welded metal bellows SPECIFICATIONS
for resistance to corrosion, shaft vibration and centrifugal forces Press. to: 27.6 bar (400 psi)
• Optimal performance ensured by three standard seal face balances; the BXQ Temp: -40°C to 204°C
seal is high balanced for flashing hydrocarbon pplications (-40°F to 400°F)
• Increased maintenance intervals due to self-cleaning rotating bellows that Speeds to: 23 m/s (75 fps)
replace springs and dynamic elastomers Sizes: 12.3 to 127 mm
• Performance benefits of metal bell ws in dual pressurized Arrangement 3 (0.483 to 5.000 in)
seals with the BXB seal’s unique ID pressurized seal face balance
API PROCESS
BXRH
Built for temperatures beyond the limits of elastomers, the BXRH balanced stationary metal bellows seal offers reliable
sealing at high speeds. Meets all API 682 Type C requirements in Arrangements 1, 2 and 3.
• Optimal performance resulting from flexible gr phite gasketing in lieu of SPECIFICATIONS

elastomers to improve temperature and chemical compatibility Press. to: 20.7 bar (300 psi)
• Reliability due to extra-long Alloy 718 bellows that offer superior corrosion Temp: -73°C to 427°C
resistance, allow more axial travel, and provide consistent spring loading (-100°F to 800°F)
• Application flexibility arising from single and dual seal configu tions as well Speeds to: 46 m/s (150 fps)
as pressurized and unpressurized arrangements Sizes: 21.8 to 127 mm
• Reduced clogging due to absence of springs and dynamic elastomers, plus (0.857 to 5.000 in)
standard anti-coke device
API PROCESS
BXHHS and BXHHSB

BXHHS and BXHHSB balanced rotating metal bellows seals are designed for refine y and petrochemical services at
high- and low-temperature extremes. Meets API 682 Type C requirements in Arrangements 1, 2 and 3.
• Optimal performance resulting from flexible gr phite gasketing in lieu of SPECIFICATIONS

elastomers to improve temperature and chemical compatibility Press. to: 20.7 bar (300 psi)
• High uptime due to corrosion-resistant Alloy 718 bellows construction and a Temp: -73°C to 427°C
low-stress design (-100°F to 800°F)
• Compact overall length designed to fit in API 610 pumps without modific tion Speeds to: 23 m/s (75 fps)
• Reliable operation ensured by extended travel bellows core that allows for Sizes: 28.2 to 128.9 mm
extreme linear shaft growth, typical in high-temperature pumping (1.110 to 5.073 in)
• Distortion-free face design maintains fl tness throughout operating range
flowserve.com 101
METAL BELLOWS
API PROCESS
BRC and BRCSH

These robust balanced metal bellows seals are designed for high-temperature hydrocarbons, heat transfer fluids and other
severe services. Meet all API 682 Type C requirements in Arrangements 1, 2 and 3.
• Longer service life ensured by edge-welded, thick-plate Alloy 718 bellows that comply SPECIFICATIONS
with NACE MR0103 criteria and withstand long-term chemical exposure Press. to: 20.7 bar (300 psi)
• Reliability resulting from the canned face design that eliminates shrink-fit distortions Temp: -73°C to 427°C
and allows low-leakage performance (-100°F to 800°F)
• Prolonged clean operation due to steam purge baffle on st tionary configur tions Speeds to: 23 m/s (75 fps)
that eliminates coking Sizes: 28.2 to 150 mm
• Application flexibility accommod tes extreme shaft movement in single or dual (1.110 to 5.906 in)
seal arrangements
The Highest Standards of Safety

Our customers find in Fl wserve a partner that is closely aligned
with their standards of a safe operating environment. Our overall,
industry-recognized performance far exceeds our peers, rivaling
that of industry award winners. It’s a continuously improving
part of our business, where where we‘ve established a safety-
first culture with processes th t demonstrate reductions in
lost time accidents, lower total recordable rates and
improvements in near-miss reporting.

103
flowserve.com
MD-200

SEALS | MIXER
MIXER
Flowserve mixer seals are designed to handle significant radial and axial shaft run-out
while keeping workers safe and protecting the environment. Cost-effective performance,
safety and reliability are engineered into every seal so total costs stay low. Choose from
a variety of cartridge or split designs for top-, side- or bottom-entry installations or have
seals custom-tailored to your specifications. Plus, every design is backed by our savvy
rotating equipment specialists. They have the industry knowledge and skills to help extend
the reliability of all kinds of agitating, blending, drying, filtering, separating and processing
equipment.
Mixer – Quick Reference

Product Sub-Type Pressures Temperatures Speeds Sizes
Mixer & Specialty vacuum to 35 bar to 200°C to 10 m/s 40 to 220 mm

M Series Equipment (500 psi) (390°F) (33 fps) (1.575 to 9.000 in)
Mixer & Specialty vacuum to to 200°C to 10 m/s 25 to 365 mm

Mixerpac Equipment 250 bar (3600 psi) (390°F) (33 fps) (1.000 to 14.400 in)
Mixer & Specialty vacuum to to 121°C 25 to 178 mm

VRA Equipment 13.8 bar (200 psi) (250°F)
to 350 rpm
(1.000 to 7.000 in)
Mixer & Specialty vacuum to to 150°C 25 to 305 mm

MSS Equipment 7 bar (100 psi) (300°F)
to 1740 rpm
(1.000 to 12.000 in)
Mixer & Specialty vacuum to 3.4 bar -40°C to 135°C 25.4 to 108 mm
ST Equipment (50 psi) (-40°F to 275°F)
to 4 m/s (13 fps)
(1.000 to 4.250 in)
to 6.9 bar -40°C to 204°C to 1.1 m/s 25 to 200 mm

ISC2-MW Mixer Equipment
(100 psi) (-40°F to 400°F) (3.5 fps) (1.000 to 8.000 in)
flowserve.com 105
MIXER
M I X E R & S P E C I A LT Y E Q U I P M E N T
M Series
M Series vertical shaft mixer seals easily adapt to changing production requirements. They are designed for use with
mixers, agitators, filters and d yers as well as steel- or glass-lined vessels.
• Unprecedented application flexibility provided by cartridge canister design th t SPECIFICATIONS

enables the seal faces to be changed out to run wet (MW), dry contacting (MD) or Press: vacuum to 35 bar (500 psi)
dry non-contacting gas barrier technology (ML) Temp: to 200°C (390°F)
• True component standardization with reduced inventory carrying costs owing to a high Speed: to 10 m/s (33 fps)
degree of parts interchangeability across the product line Sizes: 40 to 220 mm
• Optional materials compliant with FDA CFR 21, USP Class VI, ADI Free Components and (1.575 to 9.000 in)
similar specific tions
• Specialized solutions customized up to 480 mm (18.900 in) shaft size (MWC-200) Refer to literature FSD104
Mixerpac
The Mixerpac family of mixer seals is designed for top-, side- and bottom-entry installations. Configur tions available
for slurry, sterile, high-pressure or large shaft movement applications.
• Broad application flexibility wing to modular cartridge construction with and without SPECIFICATIONS
bearing as well as liquid-lubricated and gas lift-off designs Press: vacuum to 250 bar (3600 psi)
• Extended seal life due to reduced friction and wear from balanced dual-pressurized Temp: to 200°C (390°F)
design and seal faces optimized through FEA Speed: to 10 m/s (33 fps)
• Reliable operation and improved safety with available reverse-pressure capability and Sizes: 25 to 365 mm
emergency sealing solutions (1.000 to 14.400 in)
• Numerous options, including cooling flange and sanita y gland/debris catcher, for
applications requiring steam cleaning Refer to literature FSD104
VRA
The VRA is an outside-mounted, dry-running single pusher seal designed to operate on top-entry agitators and mixers.
Self-lubricating carbon or filled PTFE seal faces run completely d y without cooling.
• Cost savings provided by contacting dry-running design and two-piece collar, which SPECIFICATIONS
respectively eliminate the need for a buffer fluid system and expensive all ys in Press: vacuum to 13.8 bar (200 psi)
non-wetted areas Temp: to 121°C (250°F)
• Optimized for high run-out requirements — up to 3.81 mm (0.150 in) FIM Speed: to 350 rpm
• High reliability provided by flexible rotor design th t compensates for misalignment Sizes: 25 to 178 mm (1.000 to 7.000 in)
and double O-ring mounted stator that prevents distortion
• Reduced downtime facilitated by optional sanitary gland that allows steam cleaning Refer to literature FSD167
and sterilizing of the seal’s interior while mounted on the equipment at flowse ve.com/library.

VALVES | | MIXER
SEALS
MSS
LINEAR CONTROL
The MSS is for tough mixer and vessel applications where stuffing box face bore and OD run-out are extreme.
Typically used on older equipment or where compression packing had been used.
• Easy installation, inspection and maintenance facilitated by outside seal SPECIFICATIONS

arrangement and split design Press: vacuum to 7 bar (100 psi)
• Fits in tight spaces with no equipment tear down; can be installed in cramped Temp: to 150°C (300°F)
stuffing box areas where the bearing housing gear box or coupling create Speed: to 1740 rpm
obstructions Sizes: 25 to 305 mm
• Reliable operation owing to self-lubricating faces and design that dissipates heat (1.000 to 12.000 in)
from seal faces, which allows it to run dry or wet
• Product purity ensured by design that compensates for pressure reversals For more information,
refer to FSD162.
ST
The ST is a bottom-entry mixer seal designed for the ruggedness and reliability necessary in sterile environments,
such as bioreactors. Suitable for CIP and SIP use.
• Sterile operation ensured by sloped non-pooling, product-side design that SPECIFICATIONS

minimizes crevices and is drainable Press: vacuum to 3.4 bar (50 psi)
• Cartridge seal ensures installation ease and can be fitted with a bearing to help Temp: -40°C to 135°C (-40°F to 275°F)
steady the shaft Speed: to 4 m/s (13 fps)
• Highly reliable liquid-lubricated, dual-pressurized design eliminates leakage and Sizes: 25.4 to 108 mm
protects process integrity (1.000 to 4.250 in)
• Materials compliant with FDA CFR 21 and USP Class VI; all components are
ADI free For more information,
refer to FSD104 and FSD147.
MIXER EQUIPMENT
ISC2-MW
The ISC2-MW is a dual-arrangement standard cartridge pusher seal engineered for reliable, cost-effective
operation in mixer service.
• Reduced installation and maintenance costs assured by economical cartridge seal SPECIFICATIONS
design for top-entry installation Press: to 6.9 bar (100 psi)
• Increased uptime resulting from volute groove, which significantly increases Temp: -40°C to 204°C (-40°F to 400°F)
barrier fluid flow to promote cool running, even at mixer speeds Speed: to 1.1 m/s (3.5 fps)
• Reliable operation ensured by ISC2 thermal management technology that allows Sizes: 25 to 200 mm (1.000 to 8.000 in)
the seal to run cooler and tolerate dry-running events
For more information,
refer to FSD104.
flowserve.com 107
Gaspac L

SEALS | COMPRESSOR SEALS AND SYSTEMS
COMPRESSOR SEALS AND SYSTEMS
Our Gaspac, Circpac, and Turbopac seals have earned their reputation as the most
advanced compressor sealing solutions available. Even more, they’re backed by a
global team that leads the industry in dry gas seal retrofits, high-end compressor seal
troubleshooting, seal support engineering, and world-class gas conditioning systems.
By combining leading-edge technologies and service, Flowserve allows compressor
customers to reach higher pressure, efficiency and profitability.
Compressor Seals and Systems – Quick Reference

Product Sub-Type Pressures Temperatures Speeds to Sizes
Gaspac® T, L, Gas Compressor 650 bar to 230°C 250 m/s to 360 mm

D and S Process (9427 psi) (450°F) (820 fps) (14.125 in)
Circpac™ CB, Gas Compressor 10 bar -40°C to 180°C 140 m/s to 280 mm
LO and HP Process (150 psi) (-40°F to 350°F) (460 fps) (11.000 in)
Turbopac™ Gas Compressor 300 bar to 180°C 100 m/s 40 to 260 mm

378 and 2100 Process (4300 psi) (550°F) (330 fps) (1.500 to 10.250 in)
Gas Support 414 bar to 240°C

Supplypac™ System (6000 psi) (400°F)
— —
Cleanpac™ Gas Support 550 bar to 204°C

— —
D, F and DL System (8000 psi) (400°F)

Ampliflo ™
System (8000 psi) (400°F)
— —

Drypac™ System (8000 psi) (400°F)
— —
N2 Gas Support 13 bar to 50°C

— —
Genpac™ System (190 psi) (122°F)
flowserve.com 109
GAS COMPRESSOR PROCESS
Gaspac T, L, D and S
The Gaspac is a proven platform of dry gas seals for turbomachinery equipment and features either bi-directional T-Groove
or Advanced Pattern Groove (APG) non-contacting seal face technologies.
• Environmental regulatory compliance and energy savings assured by controlled gas SPECIFICATIONS
fl w rates over the widest operating conditions Press. to: 650 bar (9427 psi)
• Increased reliability with precision face topography that offers high film stiffness and Temp: to 230°C (450°F)
damping, and maintains a stable gas film under sl w roll and high speeds Speeds to: 250 m/s (820 fps)
• Application versatility from a wide range of single and dual configur tions with Sizes: to 360 mm (14.125 in)
process barrier and oil exclusion features
• Increased uptime via innovative solutions for secondary sealing, reverse rotation, Refer to literature FSD113
reverse pressurization and component centering at flowse ve.com/library.
Circpac CB, LO and HP

This high-performance segmented circumferential gas seal series is engineered for gas compressors as part of a Gaspac
assembly (Circpac CB and LO) or as a stand-alone cartridge (Circpac HP).
• Consistent performance from carbon ring construction designed for non-contacting SPECIFICATIONS
operation that exceeds the pressure capability of typical circumferential seals Press. to: 10 bar (150 psi)
• Increased reliability via pressure-balanced ring design and hydrodynamic surface Temp: -40°C to 180°C (-40°F to 350°F)
features, resulting in low gas consumption and long life Speeds to: 140 m/s (460 fps)
• Enhanced application versatility enabled by multiple ring combinations with optimized Sizes: to 280 mm (11.000 in)
purge and vent options
• Lower cost of ownership with fewer spare parts provided by bi-directional capability Refer to literature FSD113
for reverse rotation at flowse ve.com/library.
Turbopac 378 and 2100

The Turbopac is a highly dependable oil-lubricated, bi-directional mechanical seal designed for screw, turbo and
high-pressure, high-speed applications.
• Increased performance and rotational speeds from stationary spring assembly SPECIFICATIONS
• Enhanced safety of operations during emergency shutdowns enabled by dual-acting Press. to: 300 bar (4300 psi)
static seal that allows for product containment under reverse pressure conditions Temp: to 180°C (550°F)
• Improved ease of installation via cartridge design Speeds to: 100 m/s (330 fps)
• Reduced leakage and added efficien y from design that minimizes oil loss Sizes: 40 to 260 mm
• Application flexibility wing to availability of single and double arrangements (1.500 to 10.250 in)

VALVES | | COMPRESSOR
SEALS
An Ultra-High Bar
LINEAR CONTROL
In compressor services — where higher pressure often means higher
efficien y and greater profitability — Gaspac seals set the performance
benchmark. Able to handle high speeds and ultra-high pressures,
Gaspac seals are driving innovation, achieving ever-greater
pressures. This gas-lubricated, dry-running seal employs
some of the most advanced non-contacting, lift-off technology
SEALS AND SYSTEMS

available. It also boasts unequaled reliability, outlasting multiple
compressor turnaround cycles.
GAS SUPPORT SYSTEM
Supplypac
Supplypac modular-based dry gas seal support systems simplify the typical dry gas seal control panel and provide
safe, reliable seal operation.
• Supplypac modular-based dry gas seal support systems simplify the typical dry SPECIFICATIONS
gas seal control panel and provide safe, reliable seal operation. Press. to: 414 bar (6000 psi)
• Functional qualific tions per API 614 design criteria and ASME B31.3 certific tion Temp: to 240°C (400°F)
• Wide operating range via fl w paths that are scalable for lower pressure, larger
bore and higher fl w rates Refer to literature FSD113
• Ease of installation and improved inventory management from standardization of at flowse ve.com/library.
pre-manufactured components
• Available in multiple material and gasket options to meet specific requirement
GAS SUPPORT SYSTEM
Cleanpac D, F and DL
The Cleanpac line of dry gas seal filtr tion systems includes heavy liquid removal units (Cleanpac D), pre-filter
units (Cleanpac F), as well as single and dual coalescing filter units (Cleanpac DL)
• Lower operational costs and improved dry gas seal system reliability owing to SPECIFICATIONS
filter elements with efficie y of ß(0.3) >1000 (99.9% @ 0.3µm) Press. to: 550 bar (8000 psi)
• Application versatility due to wide variety of materials of construction (including Temp: to 204°C (400°F)
316 SS, the standard for onshore and offshore applications) as well as high-
temperature and high-pressure designs Refer to literature FSD113
• Reduced downtime resulting from a large coalescing element that enables at flowse ve.com/library.
extended operational periods between change-outs
flowserve.com 111
GAS SUPPORT SYSTEM
Amplifl w
The Amplifl w seal supply gas boosting system ensures an adequate supply of clean, filtered gas is provided to the seals
during periods of low differential pressure across the compressor.
• Optimal dry gas seal performance ensured by the system’s ability to maintain fl w SPECIFICATIONS
through the conditioning system or seal gas panel Press. to: 550 bar (8000 psi)
• Lower operating costs made possible by eliminating process contamination — Temp: to 204°C (400°F)
the number one cause of dry gas seal failures
• Versatility via configur tion options that include a portable unit, standalone panel, or Refer to literature FSD113
integration with a Flowserve dry gas seal control panel or filter gas conditioning pane at flowse ve.com/library.
GAS SUPPORT SYSTEM
Drypac
The Drypac gas dryer reduces the potential of liquid formation between the seal faces as a best practice reliability
improvement measure and recommended by API standards.
• Decreased liquid formation ensured by system that lowers the dew point of the gas SPECIFICATIONS
and raises the temperature of the seal supply gas to at least 20°C (36°F) above the Press. to: 550 bar (8000 psi)
dew point Temp: to 204°C (400°F)
• Increased MTBF of dry gas seals when the dew point of the gas is a potential issue
• Low operating costs due to simplified install tion, operation and maintenance Refer to literature FSD113
• Easily integrated within existing gas seal control panels at flowse ve.com/library.
GAS SUPPORT SYSTEM
N2 Genpac
The N2 Genpac system safely generates nitrogen gas from compressed air in hazardous conditions or remote locations.
• Optimal dry gas seal performance ensured by micron fiber filt tion technology that SPECIFICATIONS
extracts nitrogen gas at purities between 97% and 99% Press. to: 13 bar (190 psi)
• Uninterrupted nitrogen fl w made possible by dual parallel filtr tion technology Temp: to 50°C (122°F)
• High uptime provided by monitoring system with differential pressure indicating
transmitters and inlet/outlet pressure gauges Refer to literature FSD113
• Application flexibility arising from system th t can operate independently or at flowse ve.com/library.
integrate with the Flowserve dry gas seal panel or Cleanpac and Drypac gas
conditioning systems

SEALS
VALVES | | COMPRESSOR SEALS AND SYSTEMS
LINEAR CONTROL
113
flowserve.com
SLC

SEALS | SLURRY
SLURRY
Abrasive. Erosive. Corrosive. Viscous. Slurry applications can be brutal on equipment,
but Flowserve slurry seals are engineered to last. From economical designs for low-solids
applications to rugged beasts that handle up to 60% solids content by weight, Flowserve
slurry seals resist clogging with smooth geometries and non-wetted springs. Costs
are controlled with engineered assemblies that fit common slurry pumps and modular
components that make fi ld repair easy. What’s more, customers will find unrivaled
support in our knowledgeable and experienced engineering and support teams.
Slurry – Quick Reference

Product Sub-Type Pressures Temperatures Speeds to Sizes
20.6 bar -18°C to 110°C 15 m/s 32 to 220 mm

SLC Series Slurry Process
(300 psi) (10°F to 230°F) (50 fps) (1.250 to 8.661 in)
17.2 bar -40°C to 149°C 23 m/s 50 to 235 mm

SLM Series Slurry Process
(250 psi) (-40°F to 300°F) (75 fps) (2.000 to 9.250 in)
10.3 bar -4°C to 110°C 11 m/s 32 to 235 mm

RIS Slurry Process
(150 psi) (25°F to 230°F) (36 fps) (1.250 to 9.250 in)
50 bar -40°C to 220°C 50 m/s 20 to 30 mm

Allpac Slurry Process
(725 psi) (-40°F to 430°F) (164 fps) (0.750 to 11.750 in)
flowserve.com 115
SLURRY
SLURRY PROCESS
SLC Series
SLC seals are heavy-duty, single pusher cartridge seals built for the harshest slurry pump services found in mining,
mineral and ore processing, and flue gas desulfuriz tion. Suitable for solids to 60% by weight.
• Lower operating costs ensured by unique non-clogging, encapsulated cone spring, SPECIFICATIONS
which increases reliability and enables flushless oper tion Press. to: 20.6 bar (300 psi)
• Maximized equipment uptime provided by abrasion-resistant metal components and Temp: -18°C to 110°C (10°F to 230°F)
silicon carbide faces that extend seal life beyond that of slurry pump components Speeds to: 15 m/s (50 fps)
• Economical performance via clean, open design, which operates without flush w ter to Sizes: 32 to 220 mm (1.250 to 8.661 in)
reduce product dilution and eliminate flush w ter costs
• Ease of installation resulting from cartridge design that requires no special tools or Refer to literature FSD120 or
bearing housing adjustments FSD103 at flowse ve.com/library.
SLURRY PROCESS
SLM Series
These balanced single (SLM-6000) or dual (SLM-6200) cartridge pusher seals have a flexible st tor and operate without
outside flush liquid to elimin te product dilution, increase plant efficien y and reduce costs.
• Increased reliability and consistent “no visible leakage” operation due to line-on-line, SPECIFICATIONS
hydraulically balanced faces Press. to: 17.2 bar (250 psi)
• Extended seal life enabled by centroid-loaded monoblock rotor that helps to maintain Temp: -40°C to 149°C (-40°F to 300°F)
zero net deflection reducing leakage and wear Speeds to: 23 m/s (75 fps)
• Reduced maintenance costs provided by large cross-section stator O-ring, which Sizes: 50 to 235 mm (2.000 to 9.250 in)
allows maximum shaft movement while reducing the damaging effects of hang-up
• Dependable performance provided by single seals handling solids to 20%, dual seals Refer to literature FSD166 or
to 60% solids, and quench options providing complete application flexibilit FSD103 at flowse ve.com/library.
SLURRY PROCESS
RIS
The RIS rubber-energized, component slurry seal features a unique non-clogging design that does not utilize springs or
bellows. Handles solids to 50% by weight.
• Ease of installation provided by innovative adaptive components that allow the seal to SPECIFICATIONS
be installed from the wet end and adjusted externally Press. to: 10.3 bar (150 psi)
• Longer MTBF from non-clogging elastomer spring design that has no dynamic O-ring Temp: -4°C to 110°C (25°F to 230°F)
to hang up Speeds to: 11 m/s (36 fps)
• Reliable operation ensured by the rubber-energized stationary seal face that holds the Sizes: 32 to 235 mm (1.250 to 9.250 in)
seal faces together and absorbs relative shaft movement
• Reduced operating costs and improved control made possible by flushless oper tion, Refer to literature FSD151 or
which is especially beneficial in flue gas desulphuri tion FSD103 at flowse ve.com/library.

VALVES | | SLURRY
SEALS
SLURRY PROCESS
Allpac
LINEAR CONTROL
This simple yet robust single, balanced cartridge pusher seal is a cost-effective solution for slurry processes
with solids to 20% by weight.
• Increased uptime enabled by springs isolated from the process fluid and large SPECIFICATIONS
clearances between the seal and shaft seal that prevent clogging Press. to: 50 bar (725 psi)
• Reduced operating costs made possible by a design that operates without flush Temp: -40°C to 220°C (-40°F to 430°F)
• Ease of installation from cartridge seal construction Speeds to: 50 m/s (164 fps)
• Broad application flexibility made possible with single- and dual-cartridge Sizes: 20 to 30 mm (0.750 to 11.750 in)
arrangements as well as single- and multiple-spring designs
Refer to literature FSD129 or
FSD103 at flowse ve.com/library.
The Virtues of Diamond

For improved reliability in applications with poor lubricity, Flowserve
offers diamond-coated silicon carbide seal faces. Available across the
Flowserve seal platform, Flowserve diamond-coated seal faces
provide mechanical properties and performance characteristics
that surpass all others. Among the benefits are improved wear
resistance; high thermal conductivity; dry-running tolerance;
and low break-out torque. The upsides are significant life ycle
cost savings due to longer mechanical seal run time plus
reduced cooling water and energy usage.
flowserve.com 117
GX-200

SEALS | GAS BARRIER AND CONTAINMENT
GAS BARRIER AND CONTAINMENT
Running a liquid seal dry almost always means trouble, whether it’s equipment failure,
unwanted downtime or unsafe conditions. Flowserve gas barrier seals have non-contacting
seal faces that lift off during operation, so they run safely and reliably, no matter what’s
happening in the seal chamber. They also use less power and employ simplifi d support
systems. Flowserve containment seals normally run dry as a ready backup behind a liquid-
lubricated inboard seal. During upset events, the containment seal takes over primary
sealing responsibilities until the equipment can be safely serviced. Both designs offer
significant cost and environmental advantages, either minimizing or eliminating emissions.
Gas Barrier and Containment – Quick Reference

Product Sub-Type Pressures to Temperatures Speeds Sizes
34.5 bar -40°C to 260°C 1.3 to 25 m/s 25.4 to 152 mm

GF-200 Industrial Process
(500 psi) (-40°F to 500°F) (4 to 82 fps) (1.000 to 6.000 in)
13.8 bar -40°C to 260°C 2.5 to 35 m/s 25.4 to 76.2 mm

GX-200 Industrial Process
41.4 bar -40°C to 204°C 1.5 to 30.5 m/s 20.6 to 152 mm

GSL API Process
20.7 bar -73°C to 427°C to 19.8 m/s 28.2 to 128.9 mm

GSDH API Process
(300 psi) (-100°F to 800°F) (57 fps) (1.110 to 5.073 in)
17.2 bar -73°C to 427°C 3 to 46 m/s 47.6 to 104.8 mm

GTSP API Process
flowserve.com 119
GAS BARRIER AND CONTAINMENT
INDUSTRIAL PROCESS
GF-200
This dual pressurized non-contacting, gas barrier pusher seal is used in applications where zero emissions of hazardous
pumped products can be tolerated.
• Environmental regulatory compliance assured by inert gas barrier that operates with SPECIFICATIONS
zero process emissions Press. to: 34.5 bar (500 psi)
• Greater reliability enabled by spring energized O-ring technology to maintain proper Temp: -40°C to 260°C (-40°F to 500°F)
seal face tracking Speeds: 1.3 to 25 m/s (4 to 82 fps)
• Longer service life from silicon carbide seal faces using APG precision face Sizes: 25.4 to 152 mm
topography, which creates a stiff, thin gas film th t prevents wear (1.000 to 6.000 in)
• Economical performance via non-contacting seal faces that require very low power
consumption during startup and operation Refer to literature FSD137
INDUSTRIAL PROCESS
GX-200
GX-200 dual metal bellows seals utilize APG non-contacting seal face technology for outstanding performance in a variety
of applications. Fits standard or small bore seal chambers without modific tions.
• Environmental regulatory compliance assured by inert gas barrier that operates with SPECIFICATIONS
zero process emissions Press. to: 13.8 bar (200 psi)
• Long-term reliability provided by high alloy metal bellows that resist contamination and Temp: -40°C to 260°C (-40°F to 500°F)
hang-up while providing pressure reversal product containment during upset events Speeds: 2.5 to 35 m/s (8 to 115 fps)
• Lower operation and maintenance costs provided by unique design that eliminates the Sizes: 25.4 to 76.2 mm
costs of maintaining a liquid barrier system and the risks of barrier fluid contamin tion (1.000 to 3.000 in)
• Economical performance enabled by energy-efficient design th t delivers the
industry’s lowest power consumption for conventional pumps Refer to literature FSD105
API PROCESS
GSL
GSL non-contacting gas seals are designed for dry running vapor containment and full pressure wet backup sealing in
light hydrocarbon, crude oil and hazardous services.
• Fully compliant with API 682 Type A, Arrangement 2 containment seal requirements SPECIFICATIONS
• Greater reliability and service life assured by silicon carbide seal face with a bi- Press. to: 41.4 bar (600 psi)
directional wave pattern that provides the lift necessary for non-contacting operation Temp: -40°C to 204°C (-40°F to 400°F)
• Improved plant and personnel safety from backup sealing capability to 600 psi Speeds: 1.5 to 30.5 m/s
(41.4 bar), allowing safe shutdown if primary seal fails (5 to 100 fps)
• Faster, trouble-free startup via cartridge assembly that simplifies install tion Sizes: 20.6 to 152 mm
• Meets environmental emission limits with available nitrogen sweep auxiliary system (0.813 to 6.000 in)

SEALS | GAS BARRIER AND CONTAINMENT
API PROCESS
GSDH
GSDH seals are dry-running metal bellows containment seals for high-temperature hydrocarbons, heat transfer fluids
and other fluids pumped beyond the temper ture limits of elastomers.
• Fully compliant with API 682 Type C, Arrangement 2 containment seal SPECIFICATIONS
requirements Press. to: 20.7 bar (300 psi)
• Simplified maintenance compared to liquid buffer or barrier fluid dual seals; w- Temp: -73°C to 427°C
pressure steam or nitrogen purge gas helps achieve near-zero emission levels (-100°F to 800°F)
• Greater reliability via high alloy rotating metal bellows that clear convolutions and Speeds: to 19.8 m/s (57 fps)
prevent accumulation of debris Sizes: 28.2 to 128.9 mm
• Improved safety with spring-energized graphite gasket that seals with minimal (1.110 to 5.073 in)
seal face distortion and offers outstanding chemical compatibility
API PROCESS
GTSP
This dual pressurized, high-temperature metal bellows gas seal is engineered for the hottest process pumps found in
refine y and hydrocarbon services. Qualific tion tested per API 682 Type C, Arrangement 3 requirements.
• Increased reliability and service life at lower cost from design that eliminates SPECIFICATIONS
process leakage and coking problems while avoiding liquid barrier seal issues Press. to: 17.2 bar (250 psi)
• Lower operating costs with laser-applied precision face topography technology, Temp: -73°C to 427°C
creating a gas film barrier for non-contacting low-drag, low-energy consumption (-100°F to 800°F)
• High-temperature performance enhanced by design engineered to operate without Speeds: 3 to 46 m/s (10 to 150 fps)
cooling and tolerate high axial overtravel during warm-up or thermal transients Sizes: 47.6 to 104.8 mm
• Simplified install tion on double-ended pumps via sinusoidal waves, allowing (1.875 to 4.125 in)
bi-directional operation
flowserve.com 121
GTS
122

SEALS | OEM AND SPECIAL DUTY
OEM AND SPECIAL DUTY
Flexibility, reliability and low total cost are fundamental to the general industrial and specialty
equipment requirements of OEMs. And Flowserve delivers. Global OEM customers will find
a variety of mechanical seals developed specifically with OEMs in mind. That means seals
for just about anything: seals for a high-speed, high- pressure integrally geared pump;
special configurations for a low- speed, high- viscosity positive displacement pump; and
much more. We can even help with custom designs. Reach out to our experienced team.
OEM and Special Duty – Quick Reference

Product Sub-Type Pressures Temperatures Speeds Sizes
Industrial to 27 bar -40°C to 204°C to 25 m/s 15.8 to 150 mm
Pac-Seal® Process (400 psi) (-40°F to 400°F) (83 fps) (0.625 to 6.000 in)
Industrial Vacuum to -18°C to 150°C to 23 m/s 35 to 53 mm

PL Series Process 10.3 bar (150 psi) (0°F to 300°F) (60 fps) (1.375 to 2.750 in)
Industrial Vacuum to -18°C to 121°C to 19.3 m/s 38 to 152 mm

PSS 4 Process 30 bar (450 psi) (0°F to 250°F) (3800 fpm) (1.500 to 6.000 in)
High-Viscosity to 10.3 bar -53°C to 149°C to 3.5 m/s 19.1 to 76.2 mm

LS-300 Process (150 psi) (-65°F to 300°F) (12 fps) (0.750 to 3.000 in)
Steam to 20.7 bar 100°C to 343°C 3 to 46 m/s 54 to 181 mm

GTS Turbines (300 psi) (212°F to 650°F) (10 to 150 fps) (2.125 to 7.125 in)
Specialty to 86.2 bar -62°C to 204°C 1500 to 25.4 to 31.8 mm

GSS Equipment (1250 psi) (-80°F to 400°F) 36 000 rpm (1.000 to 1.250 in)
Specialty to 86.2 bar -62°C to 204°C 1500 to 25.4 to 31.8 mm

GLS Equipment (1250 psi) (-80°F to 400°F) 36 000 rpm (1.000 to 1.250 in)
Specialty to 17.2 bar -40°C to 204°C 1500 to to 31.8 mm

GSG Equipment (250 psi) (-40°F to 400°F) 36 000 rpm (1.250 in)
Specialty Vacuum to -40°C to 593°C to 46 m/s 25.4 to 457 mm

Circpac MD Equipment 6.9 bar (100 psi) (-40°F to 1100°F) (150 fps) (1.000 to 18.000 in)
Specialty Vacuum to 0°C to 121°C 16.6 m/s 12 to 152 mm

Bulk-Tite™ Equipment 3.3 bar (50 psi) (32°F to 250°F) (54 fps) (0.500 to 6.000 in)
flowserve.com 123
INDUSTRIAL PROCESS
Pac-Seal
The Pac-Seal family of component seals is available in numerous designs and styles, including diaphragm elastomer
bellows to fit a wide range of standard industrial and custom equipment pplications.
• Low cost of ownership enabled by readily available components with multiple material SPECIFICATIONS
options Press. to: 27 bar (400 psi)
• Excellent reliability ensured by standardized features, including crimped-head rotary Temp: -40°C to 204°C (-40°F to 400°F)
units and hex-torque drive Speeds to: 25 m/s (83 fps)
• Easy installation with no set screws or setting clips Sizes: 15.8 to 150 mm
• Custom designs with flexible invento y, logistics and packaging solutions for high- (0.625 to 6.000 in)
volume OEM orders ensure the right supply requirements are fully achieved
INDUSTRIAL PROCESS
PSS 4
The PSS 4 semi-cartridge split seal is ideal for pump and mixer applications. With only two major components, it
makes installation quick and easy without requiring equipment teardown.
• Exclusive 3D Key technology assures optimum face alignment in both axial and radial SPECIFICATIONS
direction, reducing leakage and installation time Press.: Vacuum to 30 bar (450 psi)
• Unique setting tabs eliminate all seal positioning, measuring and marking, assuring Temp: -18°C to 121°C (0°F to 250°F)
installation success Speeds: to 19.3 m/s (3800 fpm)
• Easily handles mixer equipment runout up to 1.5 mm (0.060 in) TIR radial shaft Sizes: 38 to 152 mm
movement (1.500 to 6.000 in); contact
• Fully split design installs easily around the shaft, outside the seal chamber, eliminating Flowserve for larger sizes
the need to dismantle the equipment
INDUSTRIAL PROCESS
PL Series
PL Series seals are pre-engineered single (PL-100) and dual (PL-200) cartridge seals with non-metallic wetted components.
They are a cost-effective alternative to high-alloy seals in ASME and ISO pumps in corrosive services.
• Greater reliability from special carbon fiber reinforced PTFE construction th t provides SPECIFICATIONS
excellent corrosion resistance and mechanical properties to maintain seal integrity Press.: Vacuum to 10.3 bar (150 psi)
• Longer service life and MTBF ensured by springs and pins that are isolated from the Temp: -18°C to 150°C (0°F to 300°F)
product to prevent clogging and chemical attack Speeds: to 23 m/s (60 fps)
• Reduced maintenance costs with replaceable carbon fiber PTFE liner th t protects the Sizes: 35 to 53 mm (1.375 to 2.750 in)
316 SS gland
• Affordable alternative to high-alloy single or dual metal seals

HIGH-VISCOSITY PROCESS
LS-300
This cartridge-style, multiple dynamic lip seal is designed for highly viscous applications in positive displacement
and progressive cavity pumps.
• Greater process accuracy from seal designed to run dry, without the need for an SPECIFICATIONS
external flush or lubric ting barrier fluid Press. to: 10.3 bar (150 psi)
• Reliable operation ensured by triple-lip design effectively seals process from Temp: -53°C to 149°C (-65°F to 300°F)
atmosphere at viscosities up to 12 000 cP Speeds to: 3.5 m/s (12 fps)
• Installation ease assured by preset cartridge Sizes: 19.1 to 76.2 mm
• Application flexibility enabled by design th t is interchangeable between standard (0.750 to 3.000 in)
and universal bracket pumps with just a gasket change
• Ease of field maintenance made possible by optional repair kit Refer to literature FSD117
STEAM TURBINES
GTS
The most reliable steam seal in the industry, the GTS is a metal bellows seal designed to bring the benefits of
mechanical seals to steam turbines and handle slow roll operation.
• Significant ener y savings and improved safety made possible by design that SPECIFICATIONS
replaces carbon rings on steam turbines, significantly reducing steam leak ge Press. to: 20.7 bar (300 psi)
• Greater reliability through precision face topography technology, ensuring non- Temp: 100°C to 343°C (212°F to 650°F)
contacting, non-clogging operation able to recover from upset conditions Speeds: 3 to 46 m/s (10 to 150 fps)
• Long-lasting, high-temperature and corrosive environment performance enabled Sizes: 54 to 181 mm (2.125 to 7.125 in)
by Alloy 718 bellows
• Application versatility enabled by internal or external cartridge design, adaptable Refer to literature FSD107
for diverse turbines at flowse ve.com/library.
S P E C I A LT Y E Q U I P M E N T
GSS
GSS gas-lubricated, non-contacting pusher seals provide superior reliability in high-speed, integrally geared pumps
and compressors.
• Longer service life and MTBF enabled by non-contacting precision face SPECIFICATIONS
topography, eliminating wear at near-zero power consumption Press. to: 86.2 bar (1250 psi)
• Installation ease for startup success is provided by a standardized cartridge with a Temp: -62°C to 204°C (-80°F to 400°F)
non-clamped rotating face mounted for high-speed performance Speeds: 1500 to 36 000 rpm
• Meets all requirements for low emission containment seals in hydrocarbon Sizes: 25.4 to 31.8 mm
pumping applications (1.000 to 1.250 in)
• Configurable as a single compressor seal dual pressurized barrier gas seal, or
dry-running containment seal Refer to literature FSD102
flowserve.com 125
GLS
The GLS is the liquid service configur tion of the Flowserve GSS. It is designed to fit the unique install tion envelop and
operating speeds present in integrally geared pumps.
• High-pressure performance enabled by successful operation up to 86.2 bar (1250 psi) SPECIFICATIONS
in flashing hydrocarbons Press. to: 86.2 bar (1250 psi)
• Longer service life assured by operation with no measureable face wear or worn taper Temp: -62°C to 204°C (-80°F to 400°F)
due to enhanced seal face fl tness provided by the non-clamped rotating SiC face Speeds: 1500 to 36 000 rpm
• Meets all requirements for low emission seals in hydrocarbon pumping applications Sizes: 25.4 to 31.8 mm
• Configurable as a single seal dual unpressurized seal with liquid buffer, dual (1.000 to 1.250 in)
unpressurized seal with gas buffer, or dual pressurized seal with liquid barrier
GSG
GSG seals are specifically designed for integrally geared pumps and compressors in high-speed oil-flooded gearbox
applications.
• Energy savings and improved safety enabled by innovative Hydrodynamic Surface SPECIFICATIONS
Tension (HST) face topography that provides near-zero leakage performance Press. to: 17.2 bar (250 psi)
• Reliable high-speed operation enabled by proprietary laser-machined wavy face Temp: -40°C to 204°C (-40°F to 400°F)
• Greater durability and service life assured by seal face materials suitable for frequent Speeds: 1500 to 36 000 rpm
starts and stops Sizes to: 31.8 mm (1.250 in)
• Upgrade ease made possible by direct replacement of existing gearbox seals without
equipment modific tion Refer to literature FSD102
Circpac MD
The Circpac MD is a segmented circumferential seal designed for fans, blowers, dryers, turbines, centrifuges and other
rotating equipment.
• Superior performance with lower gas consumption ensured by hydraulically balanced SPECIFICATIONS
ring design that consistently outperforms packing, bushings, labyrinths and felt seals Press.: Vacuum to 6.9 bar (100 psi)
• Installation ease with radially split seal housing that mounts outside the seal chamber Temp: -40°C to 593°C
without modific tion or dismantling (-40°F to 1100°F)
• Increased durability provided by robust carbon rings with foul-resistant joints and Speeds to: 46 m/s (150 fps)
large bearing pads that maintain integrity during off-design operation Sizes: 25.4 to 457 mm
• Application flexibility with multiple ring configu tions that can be staged for reduced (1.000 to 18.000 in)
leakage, pressurized for zero process emissions, or added for emergency backup

BulkTite
Designed for rotating equipment handling powder and bulk solids, BulkTite seals improve sealing performance with
non-wearing, low-maintenance solutions for screw conveyors, rotary airlocks, mixers, de-lumpers and more.
• Easy cartridge seal installation, minimizing downtime SPECIFICATIONS

• Superior seal life with 3.2 mm (0.125 in) radial shaft movement, Press. to: Vacuum to 3.3 bar (50 psi)
up to 2° angular misalignment and axial shaft movement Temp: 0°C to 121°C (32°F to 250°F)
• Minimal gas consumption for reduced operating costs Speeds to: 16.6 m/s (54 fps)
Sizes: 12 to 152 mm
(0.500 to 6.000 in)
flowserve.com 127
W8 Reservoir
128

SEALS | SEAL SUPPORT SYSTEMS
SEAL SUPPORT SYSTEMS
Flowserve seal support systems help ensure years of safe, reliable and cost-effective
mechanical seal operation. Flowserve employs a specialized engineering team with years of
experience recommending or designing systems to suit specific applications, specifications
and unique customer requirements. With a full range of products that meet ASME Section
VII Division 1, API, PED, NR13 and numerous other regional and international standards,
Flowserve fulfills the global needs of the oil and gas, chemical, power, water and general
industries.
Seal Support Systems – Quick Reference

Product Type Sub-Type Flows to Pressures Temperatures Volume
Buffer/Barrier Fluid Industrial & to 82.3 bar to 148°C to 20 L

—
Reservoirs API Process (1200 psi) (300°F) (5 gal)
Bladder Industrial & to 82.3 bar to 148°C 20 to 50 L

—
Accumulators API Process (1200 psi) (300°F) (5 to 13 gal)
Piston Industrial & to 75.8 bar to 148°C to 11.4 L

—
Accumulators API Process (1100 psi) (300°F) (3 gal)
Buffer/Barrier Industrial & 14.2 lpm to 34.4 bar to 93°C

—
Gas Panels API Process (30 SCFH) (500 psi) (200°F)
Industrial & 15 lpm to 27.6 bar 4.4°C to 60°C

Circulators API Process (4 gpm) (400 psi) (40°F to 140°F)
—
682 Water to 275 bar (4000 psi)

API Process — — —
Seal Coolers to 371°C (700°F) (coil)
Water Seal to 183 bar (2650 psi)

Industrial Process — — —
Coolers to 95°C (200°F)
to 80 bar to 425°C
Airfin Seal Coole Industrial Process —
(1200 psi) (800°F)
—
flowserve.com 129
INDUSTRIAL & API PROCESS
Buffer/Barrier Fluid Reservoirs

Flowserve reservoirs are available for dual pressurized (Plan 53A) and dual non-pressurized (Plan 52) mechanical seals.
Options are available for utilizing water or oil as barrier fluid
• Extended seal life made possible by reliable supply of clean buffer/barrier fluid for SPECIFICATIONS
cooling and lubrication Press: to 82.3 bar (1200 psi)
• Reduced maintenance and operating costs with optimal buffer/barrier fluid management Temp: to 148°C (300°F)
• Increased reservoir life with corrosion-resistant 304, 316 or 316L construction Volume: to 20 L (5 gal)
• Compliance with API 682, ASME Section VIII, ASME B31.3, PED and/or TRD as required
• Application flexibility provided by configu tions and instrumentation that are easily Refer to literature FSD239
adapted to local standards as well as application and customer requirements at flowse ve.com/library.
Bladder Accumulators
Plan 53B barrier systems are available with multiple options for accumulator sizes, coolers and piping. Compliant with API
682, ASME Section VIII, ASME B31.3, PED and/or TRD as required.
• Increased seal life at higher barrier seal pressures SPECIFICATIONS

• Improved reliability by preventing nitrogen entrainment in the barrier flui Press: to 82.3 bar (1200 psi)
• Ease of installation provided by design that does not require connection to a plant Temp: to 148°C (300°F)
nitrogen utility Volume: 20 to 50 L (5 to 13 gal)
• Application flexibility provided by configu tions and instrumentation that are easily
adapted to local standards as well as application and customer requirements
• Improved reliability made possible by the ability to monitor each seal individually
Piston Accumulators
Flowserve Plan 53C piston accumulators can be built with multiple options for cooling coils, external heat exchanges and
instrumentation to fit customer requirements Compliant with ASME or PED as required.
• Improved seal life and reliability ensured by tracking barrier pressure where pump SPECIFICATIONS
pressure fluctu tes or the inboard seal pressure differential must be limited Press: to 75.8 bar (1100 psi)
• Lower operating costs from maintenance and barrier fluid cost s vings Temp: to 148°C (300°F)
• Application flexibility provided by configu tions and instrumentation that are easily Volume: to 11.4 L (3 gal)
adapted to local standards as well as application and customer requirements

VALVES | | SEAL
SEALS
Buffer/Barrier Gas Panels
LINEAR
Flowserve Plan 72 and 74 gas panels combine fl w monitoring and control elements in a self-contained,
easy-to-use unit. For use with unpressurized and pressurized Flowserve gas seals.
SUPPORT
• Maximized seal life enabled by supply of clean barrier or buffer gas at SPECIFICATIONS
CONTROL
optimal conditions Flows to: 14.2 lpm (30 SCFH)
• Compliance with API 682, ASME B31.3 and PED requirements Press to: 34.4 bar (500 psi)
• Low installation and commissioning costs assured by easy-to-install, Temp: to 93°C (200°F)
self-contained units
SYSTEMS
Circulators
Plan 54 circulators provide clean barrier fluid t a controlled fl w rate, pressure and temperature to ensure proper
seal performance.
• Optimized seal operating temperatures ensured by maximum system cooling SPECIFICATIONS

• Improved seal reliability with a dependable local system, eliminating the need to Flows: to 15 lpm (4 gpm)
connect to a distant and potential unreliable pressure source Press: to 27.6 bar (400 psi)
• Extended seal life enabled by improved system cleanliness that is maintained using Temp: 4.4°C to 60°C (40°F to 140°F)
one or more high-quality, full-fl w liquid filter
• Application flexibility provided by configu tions and instrumentation that are easily Refer to literature FSD122
adapted to local standards as well as application and customer requirements at flowse ve.com/library.
API PROCESS
682 Water Seal Coolers

Flowserve seal coolers are engineered for high-temperature refine y applications and maximized cooling capacity.
Two designs available: the full-featured 682 Seal Cooler and the lower-duty LD 682 Seal Cooler.
• Process control ensured by design that isolates the process fluid from the SPECIFICATIONS
cooling water Press: to 275 bar (4000 psi) (coil)
• Ease of commissioning with full vent and drain on both product and coolant sides Temp: 371°C (700°F) (coil)
• Ease of maintenance provided by ability to quickly and easily disassemble and
clean the unit without damaging the coils Refer to literature FSD106 and
• Cost-effective application flexibility with multiple corrosion-resistant m terial FPD238 at flowse ve.com/library.
options for the coil and shell construction
flowserve.com 131
INDUSTRIAL PROCESS
Water Seal Cooler

Water seal coolers lower the temperature of process/barrier fluid to improve seal reliabilit . Designed and
manufactured in accordance with ASME Section VIII, Div 1 and PED.
• Easy installation in limited spaces due to compact design with integral mounting SPECIFICATIONS
bracket and convenient pipe porting Press: to 183 bar (2650 psi)
• Simplified maintenance with quick access to coil only one bolt fastening the shell, to 95°C (200°F)
and no disturbance to piping during shell removal
• High-temperature fittings in luded as standard Refer to literature FSD174
Airfin Seal Coole

The Airfin seal cooler is vailable in natural convection and forced air designs with a cooling area of 2.5 m² (26.8 ft²).
• Lower operating costs ensured by air-cooling technology that eliminates water SPECIFICATIONS
treatment and disposal Press: to 80 bar (1200 psi)
• Improved reliability with cooling water-free design, which prevents accidental Temp: to 425°C (800°F)
shutoff and winter freeze-up
• Minimal installation and maintenance costs with unit design that requires less Refer to literature FSD197
piping and is less susceptible to fouling at flowse ve.com/library.
The Time Value of Service

Every minute of uptime counts. We get it. We’re here to help with
sealing technologies, systems and services that minimize downtime,
improve equipment reliability and reduce operating expenses —
one seal at a time or across an entire unit. And, with our
global network of Quick Response Centers, you can rest easy
knowing support is near, inventory can ship the same day,
and engineered seal repairs can be turned around within
days, if not hours.

SEALS
VALVES | | SEAL SUPPORT
LINEAR SYSTEMS
CONTROL
133
flowserve.com
Bearing Gard
134

SEALS | ACCESSORIES
ACCESSORIES
Flowserve accessories for mechanical seals and associated equipment help you enhance
long-term reliability and safety while minimizing maintenance. Bearing isolators protect
bearing housings from environmental contamination for greater equipment longevity and
less downtime. DuraClear synthetic lubricants and barrier fluids provide optimal lubrication
for mechanical seals and rotating equipment to extend service life by reducing friction
and wear. Cyclone and magnetic separators protect seals and other components by
removing entrained particulate from the coolant stream. These products are a sample of the
most popular accessories for protecting seals, seal support systems and general rotating
equipment.
Accessories – Quick Reference

Product Type Sub-Type Flows to Pressures Temperatures Sizes
23 to 203 mm
Bearing Gard™ Bearing Isolator — — —
(0.875 to 8.000 in)
to 152 mm
BGM Bearing Isolator — — —
(6.000 in)
DuraClear™ Industrial Process — — — —
to 103 bar 76 L
Refill Car Industrial Process —
(1500 psi)
—
(20 gal)
13 lpm 25 bar 0°C to 100°C

Seal Gard™ Industrial Process
(3.5 gpm) (363 psi) (32°F to 212°F)
—
Magnetic High-Energy 15 lpm 103.4 bar to 204°C 12.7 to 19 mm

Separator Process (4 gpm) (1500 psi) (400°F) (0.500 to 0.750 in)
Cyclone 57 lpm 138 bar to 455°C 12.7 to 19 mm

Slurry Process
Separator (0.9 to 15 gpm) (2000 psi) (850°F) (0.500 to 0.750 in)
to 80°C
SLD Slurry Process — —
(175°F)
—
flowserve.com 135
ACCESSORIES
B E A R I N G I S O L AT O R
Bearing Gard
Bearing Gard isolators improve rotating equipment reliability by protecting against contamination and improving oil
retention. Applied in all industries, they satisfy IP-66, IEEE-841, API 610 and ATEX requirements.
• Increased rotating equipment life enabled by preventing the #1 reason for rotating SPECIFICATIONS
equipment failure: contamination of bearings and lubrication Sizes: 23 to 203 mm
• Decreased maintenance costs made possible with design that eliminates shaft wear (0.875 to 8.000 in)
and fretting common with other isolator designs
• Significantly reduced oil leaks with non-contacting non-wearing technology Refer to literature FSD257
• Lower inventory costs and fewer part numbers to manage, with one design that at flowse ve.com/library.
covers axial movement up to 0.63 mm (0.025 in)
• Reduced lead time with same-day shipping of made-to-order sizes
B E A R I N G I S O L AT O R
BGM
Utilizing rare earth magnets to keep seal faces closed, the BGM completely isolates the bearing housing from
contamination and effectively contains oil mist within the bearing housing.
• Increased rotating equipment life enabled by preventing the #1 reason for rotating SPECIFICATIONS
equipment failure: contamination of bearings and lubrication Sizes: to 152 mm (6.000 in)
• Decreased oil mist lubrication costs with positive sealing, preventing oil mist egress
• Reduced maintenance costs provided by magnets holding the seal faces closed to Refer to literature FSD149
minimize oil leakage while allowing high axial shaft movement at flowse ve.com/library.
INDUSTRIAL PROCESS
DuraClear
DuraClear high-performance synthetic lubricants are specially formulated for dual mechanical seal barrier or buffer
fluids to increase mean time between planned maintenance and reduce ener y consumption.
• Process fluid comp tibility assured by synthetic oils and oil blends readily SPECIFICATIONS
available with food grade compliance; DuraClear Crystal 7 is chemically inert and NSF H-1 Food Grade
non-reactive for the most aggressive services ISO 5, 7 and 32 viscosities
• Extended seal life with reduced friction and wear, oxidation resistance, available
temperature stability and low volatility
• Increased drain and replenish intervals due to longer fluid life Refer to literature FSD123,
• Increased uptime with formulations for bearing frame oil, compressor oil, gear oil, FSD269 and FSD268
hydraulic oil, turbine oil, air tool lubricant and grease applications at flowse ve.com/library.

VALVES | | ACCESSORIES
SEALS
INDUSTRIAL PROCESS
Refill Car
LINEAR CONTROL
This rugged, easy-to-use, high-capacity reservoir refill cart all ws you to add barrier fluid to seal support systems
• Reduced maintenance enabled by ability to add barrier fluid during oper tion, SPECIFICATIONS
without pump downtime or fugitive emissions Volume: to 76 L (20 gal)
• Reduced errors with optional color-coded quick disconnects to prevent adding Press: to 103 bar (1500 psi)
incorrect flui
• Ease of use provided by rugged, easy-to-maneuver cart with pneumatic tires,
large reservoir tank and high-pressure hand pump
INDUSTRIAL PROCESS
Seal Gard
The Seal Gard manages seal water fl w rates for single and dual seals to improve the mean time between planned
maintenance of your rotary equipment by improving the environment in the seal area.
• Lower operating cost from dependable fl w control that saves water costs by SPECIFICATIONS
reducing seal water usage Flows to: 13 lpm (3.5 gpm)
• Ease of operation assured by clear-view acrylic fl w meter with vertical fl w tube Press. to: 25 bar (363 psi)
that resists fouling and vibration-resistant pressure gauge Temp: 0°C to 100°C (32°F to 212°F)
• Reduced downtime enabled by standard check valve that prevents backup of
product into the seal water line in the event of pressure reversal Refer to literature FSD154
HIGH-ENERGY PROCESS
Magnetic Separator
A magnetic separator installed in closed loop fluid systems removes iron oxide parti les, protects equipment from
contamination damage and increases system reliability.
• Minimal installation costs by inline insertion into Plan 23 piping plans or similar SPECIFICATIONS
closed loop control lines Flows: to 15 lpm (4 gpm)
• Improved mechanical seal reliability enabled by strong magnetic field th t Press. to: 103.4 bar (1500 psi)
effectively captures iron oxide particles to prevent seal face abrasion, hang-up or Temp: to 204°C (400°F)
clogging Sizes: 12.7 to 19 mm
• Long-term reliability provided by large surface area of magnet capable of storing (0.500 to 0.750 in)
iron oxide particles through extended maintenance cycles
flowserve.com 137
ACCESSORIES
SLURRY PROCESS
Cyclone Separator
Cyclone separators are designed to efficiently remove sand pipe scale and other abrasive particles from Plan 31
injection fl w to mechanical seals.
• Increased seal reliability ensured by centrifugal effects generated by differential SPECIFICATIONS

pressure across the cyclone that carries away abrasive particles Flows to: 57 lpm (0.9 to 15 gpm)
• Improved equipment reliability, with up to 99% separation efficien y Press. to: 138 bar (2000 psi)
• Offered in several sizes to fit the pplication based on fl w rate and pressure Temp: to 455°C (850°F)
Sizes: 12.7 to 19 mm
(0.500 to 0.750 in)
SLURRY PROCESS
SLD
The SLD dispenses lubrication to the atmospheric side of mechanical seals. It is ideal for seals subjected to periods of dry
running or cavitation when product liquid does not provide adequate film between seal faces
• Extended seal life — particularly flushless seals in harsh slur y conditions — SPECIFICATIONS
made possible by providing and maintaining proper lubrication Temp: to 80°C (175°F)
• Lower operating cost delivered by unitized system that does not require air, electricity
or external water Refer to literature FSD148
• Increased uptime with DS-920-OG DuraClear lubricant, which resists breakdown at flowse ve.com/library.
when mixed with pumpage, water or containments
• Optional DS-460-F DuraClear lubricant is approved by USDA for incidental food
contact

SEALS
VALVES | | ACCESSORIES
LINEAR CONTROL
139
flowserve.com
140 140

VALVES
VALVES
Whether it’s critical, lethal, toxic or Ball. . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
aggressive, you’ll find Flowserve valves Butterfl . . . . . . . . . . . . . . . . . . . . . . . . 158
Rotary Control. . . . . . . . . . 162

doing the job around the world. That’s
Linear Control . . . . . . . . . . 168
because extended service life, safe
Severe Service Control. . . . . . . . . . . . 178
operation and environmental protection are
Gate. . . . . . . . . . . . . . 186
at the core of every valve we manufacture. Globe. . . . . . . . . . . . . . . . . . . . . . . . . . 190
Global customers can easily find the Check . . . . . . . . . . . . . 198
configurations they equire, engineered Plug. . . . . . . . . . . . . . 206
to meet requisite performance and safety

standards, whether it’s a standard or
custom-engineered solution.
It’s a portfolio of brands for quarter-

turn, rotary, linear, control and specialty
configurations that covers today s toughest
demands for valve performance. But
we’re looking ahead to new challenges
that will test the current state of valve
manufacturing. This mindset pushes us
to pursue materials advancements and
severe-duty enhancements as well as the
next levels of precision control, optimized
flow and fail-safe shut-o f.
flowserve.com 141
FK76M
142

VALVES | BALL
BALL
Long life and safe operation in tough services, from cryogens to highly corrosive fluids —
these are the hallmarks of our comprehensive and respected ball valve portfolio. Maximum
safety and environmental protection are the driving factors in every design, achieved
through corrosion-resistant materials, fire-safe testing, blowout-proof stems and tight shut-off
features. Global customers can fulfill requirements from dozens of configurations built to a
full range of international design and performance standards.
Ball – Quick Reference*

Product Sub-Type Sizes Pressures Temperatures
DN 65 to 300 PN 16 to 40 -105°C to 650°C

FK75M Floating
NPS 2½ to 12 Class 150 to 900 (-157°F to 1202°F)
DN 15 to 50 PN 16 to 250 -105°C to 650°C

FK79 Floating
NPS ½ to 2 Class 150 to 2500 (-157°F to 1202°F)
DN 25 to 400 PN 10 to 40 -30°C to 250°C

Duball™ DL Floating
NPS 1 to 16 Class 150 to 300 (-22°F to 482°F)
Worcester DN 8 to 150 PN 100 -46°C to 230°C

Floating
Three-Piece Ball NPS ¼ to 6 Class 600 (-51°F to 446°F)
Worcester DN 15 to 250 PN 20 to 50 -46°C to 315°C

Floating
Flanged Ball NPS ½ to 10 Class 150 to 300 (-51°F to 600°F)
Worcester DN 8 to 150 PN 100 -196°C to 82°C

Floating
Cryogenic Ball NPS ¼ to 6 Class 600 (-321°F to 180°F)
DN 15 to 200 PN 20 to 100 -196°C to 200°C

CryoSeal Floating
NPS 1/2 to 8 Class 150 to 600 (-320°F to 400°F)
flowserve.com 143
Ball – Quick Reference, cont’d.
ProCap DN 500 to 750 PN 16 -30°C to 250°C

Segmented
Capping Valve NPS 20 to 30 Class 150 (-22°F to 482°F)
DN 65 to 500 PN 16 to 160 -105°C to 650°C

FK76M Trunnion-Mounted
DN 50 to 500 PN 160 to 250 -105°C to 650°C

HK35 Trunnion-Mounted
DN 50 to 1600 PN 20 to 420 -46°C to 220°C

VW1 Trunnion-Mounted
PN 20 to 420
DN 25 to 1600 -196°C to 400°C
VB2 and VB3 Trunnion-Mounted
NPS 1 to 64
Class 150 to 2500
(-320°F to 750°F)
API 2000 to 10 000
PN 20 to 420
DN 50 to 1400 -46°C to 150°C
Subsea Trunnion-Mounted
NPS 2 to 56
Class 150 to 2500
(-51°F to 302°F)
API 2000 to 10 000
Double DN 50 to 1200 PN 20 to 420 -196°C to 400°C

Trunnion-Mounted
Block and Bleed NPS 2 to 48 Class 150 to 2500 (-320°F to 750°F)
Cryogenic DN 25 to 1400 PN 20 to 420 -196°C to 200°C

Trunnion-Mounted
Ball Valve NPS 1 to 56 Class 150 to 2500 (-320°F to 392°F)
DN 150 to 900 PN 10 to 40 -30°C to 250°C

Trunnball™ DL Trunnion-Mounted
Rising Stem Ball DN 25 to 600 PN 10 to 320 -196°C to 600°C

Rising Stem
Valve (RSBV) NPS 1 to 24 Class 150 to 2500 (-321°F to 1112°F)
DN 15 to 350 PN 16 -10°C to 200°C

AKH2 Lined
NPS ½ to 14 Class 150 (14°F to 392°F)
DN 25 to 150 PN 50 -10°C to 200°C

AKH2-300 Lined
NPS 1 to 6 Class 300 (14°F to 392°F)
-10°C to 200°C
AKH2A Lined NPS 1 to 6 Class 150
(14°F to 392°F)

VALVES | BALL
LINEAR CONTROL
-10°C to 200°C
AKH3 Lined NPS 1 to 14 Class 150
(14°F to 392°F)
DN 25 to 150 PN 16 -10°C to 350°C

AKH5 Lined
NPS 1 to 6 Class 150 (14°F to 662°F)
DN 25 to 50 For glass -10°C to 200°C

AKH7-KP Lined
NPS 1 to 2 connections (14°F to 392°F)
DN 15 to 150 PN 16 -10°C to 200°C

AKH8 Lined
NPS ½ to 6 Class 150 (14°F to 392°F)
DN 25 to 150 Varies, depending Varies, depending

V-Port Lined
NPS 1 to 6 on valve on valve
DN 25 to 150 PN 16 -10°C to 200°C

AMP3 Lined
NPS 1 to 6 Class 150 (14°F to 392°F)
DN 25 to 150 PN 16 -10°C to 200°C

Sight Glass Series Lined
NPS 1 to 6 Class 150 (14°F to 392°F)
AKH6 Fully Lined DN 25x50 to 150x200 PN 16 -10°C to 200°C

Lined
Tank Drain NPS 1x2 to 6x8 Class 150 (14°F to 392°F)
DN 15 to 450 PN 20 to 260 -196°C to 815°C

McCANNASEAL® Top-Entry
PN 20 to 420
DN 50 to 1400 -196°C to 400°C
VT1 Top-Entry
NPS 1¹³∕16 to 16¾
Class 150 to 2500
(-320°F to 750°F)
API 2000 to 10 000
flowserve.com 145
BALL
F L O AT I N G
FK75M
A split-body ball valve for the chemical and petrochemical industries with a highly standardized design.
• Increased uptime and durability from robust design with chemical coating and high- SPECIFICATIONS
performance cladding Sizes: DN 65 to 300; NPS 2½ to 12
• Reliable performance to highest zero-tightness demands enabled by FCI 70-2 Class VI Press: PN 16 to 40; Class 150 to 900
seat design Temp: -105°C to 650°C
• Reduced replacement cost via easy upgrades and chemical coating options for (-157°F to 1202°F)
diverse applications
• Improved plant and personnel safety assured by valve compliance with fugitive Refer to literature
emissions standard ISO 15848 ARAFL0001-W-FK75M at
Argus ® flowse ve.com/library.
F L O AT I N G
FK79
With many innovative design features, the FK79 represents the highest standard in valve technology and is designed to
meet API-6D, ASME 16.34 and ISO 17292 requirements.
• High performance in severe service conditions and extreme environments ensured by SPECIFICATIONS
durable design with chemical coating and high-performance cladding Sizes: DN 15 to 50; NPS ½ to 2
• Reliable performance to highest zero-tightness demands enabled by FCI 70-2 Class VI Press: PN 16 to 250; Class 150 to 2500
seat design Temp: -105°C to 650°C
• Long service life via double-stem seal system and stem supported in bearings, (-157°F to 1202°F)
ensuring seals are free from operating loads
Argus Refer to literature
• Reduced environmental impact and improved safety ensured by compliance with
TA-Luft, EPA (Method 21) and ISO 15848 fugitive emissions requirements ARAFL0001-W-FK79 at
flowse ve.com/library.
F L O AT I N G
Duball DL
A high-performance, metal-seated, full-bore ball valve, equally suitable for isolation, on-off and modulating control
applications.
• Long, maintenance-free, safe operation in automated on-off and control service SPECIFICATIONS
assured by spring-loaded stem seal packing Sizes: DN 25 to 400; NPS 1 to 16
• Increased plant and personnel safety via blowout-proof stem and high-torque Press: PN 10 to 40; Class 150 to 300
transmission with minimum mechanical backlash Temp: -30°C to 250°C (-22°F to 482°F)
• Broad application versatility enabled by extensive size range and options, including
fire-safe tested version Refer to literature NFENTB4167
NAF ®

VALVES | BALL
F L O AT I N G
Worcester Three-piece Ball

The Worcester family of three-piece ball valves is comprised of numerous configur tions to suit a wide variety
of application requirements. Each is designed to ASME B16.34 specific tions.
• Significantly longer se vice life compared to conventional ball valves via improved SPECIFICATIONS
stem seal design Sizes: DN 8 to 150; NPS ¼ to 6
• Increased durability from heavy-duty bolting and valve constructions Press: PN 100; Class: 600
• Ease of maintenance enabled by design that allows actuators and brackets to be Temp: -46°C to 230°C (-51°F to 446°F)
removed without affecting valve or piping integrity, plus easy access for stem seal
adjustment Refer to literature WCABR1050 or
WCE4459 at flowse ve.com/library.
Worcester • Low inventory carrying costs made possible by common mounting brackets for
three-piece and equivalent flanged valve
F L O AT I N G
Worcester Flanged Ball

The Worcester family of standardized flanged ball valves offers tight shutoff and leak-tight stem seals
Each is designed for high-cycle operation, pressure integrity, material compatibility, fast operation and
high-temperature endurance.
• Longer service life through unique seat design that minimizes friction and wear SPECIFICATIONS
• Economical operation facilitated by low operating torque Sizes: DN 15 to 250; NPS ½ to 10
• Improved plant and personnel safety via compact, blowout-proof stem Press: PN 20 to 50; Class 150 to 300
Temp: -46°C to 315°C (-51°F to 600°F)
Refer to literature WCABR1013 and
Worcester PB 800 at flowse ve.com/library.
F L O AT I N G
Worcester Cryogenic Ball

Worcester high-performance cryogenic shutoff valves are designed for tough applications involving all types of
cryogens, including oxygen, hydrogen, methane, ammonia, nitrogen, flourine LNG and deuterium.
• High performance and low thermal stress assured by valve design that assures SPECIFICATIONS
tight shutoff, zero-body leakage and low torque through large thermal excursions Sizes: DN 8 to 150; NPS ¼ to 6
from ambient to -253°C (-425°F) Press: PN 100; Class 600
• Economical performance provided by eliminating the expensive high-maintenance Temp: -196°C to 82°C
stuffing box common in rising stem globe valve (-321°F to 180°F)
• Increased plant and personnel safety assured by zero-leak packing, fire-tight design
and blowout-proof/pressure-safe stem Refer to literature WCABR1040 or
Worcester WCEBR0013 at flowse ve.com/library.
flowserve.com 147
BALL
F L O AT I N G
CryoSeal
The optimum solution for cryogen fl w isolation at temperatures as low as -196°C (-320°F), including LNG liquefaction,
transportation and regasific tion. Certified fire-safe and meets ISO 15848 standard
• Environmental and regulatory compliance made possible by design engineered to SPECIFICATIONS

meet ISO 15848, ASME B16.34, BS 6364, MSS SP-134, MESC SPE 77/200, ASME Sizes: DN 15 to 200; NPS ½ to 8
B16.10 and API 6D specific tions Press: PN 20 to 100; Class 150 to 600
• Easy in-line maintenance via top-entry design Temp: -196°C to 200°C
• Simple and cost-effective to automate due to quarter-turn operation and low-torque (-320°F to 400°F)
seat profile
Refer to MMENBR1027 or MMENIM2007
McCANNA™
SEGMENTED
ProCap Capping Valve

Unique high-tech capping valve designed for automated filling of wood chips for b tch digester applications in
the pulp industry.
• Maximized uptime and reduced maintenance requirements via eccentric hubs, which SPECIFICATIONS
load the seat and provide tight shutoff Sizes: DN 500 to 750; NPS 20 to 30
• Increased efficien y provided by its unique design that prevents wood chips from Press: PN 16; Class 150
getting stuck between the housing and the ball Temp: -30°C to 250°C (-22°F to 482°F)
• Improved safety and environment compliance due to tight shutoff that prevents
NAF Refer to literature Fk 41.55
leakage to the atmosphere during cooking sequence
• Excellent corrosion resistance from EN 1.4408/ASTM A351 CF8M body at flowse ve.com/library.
TRUNNION-MOUNTED
FK76M
Designed to meet API-6D, ASME B16.34 and ISO 17292 requirements, the FK76M delivers durability and low operating
torques with a clear separation of sealing and bearing functions. Fire-safe to ISO 10497 and API 607.
• Long service life in severe applications owing to chemical coating and high- SPECIFICATIONS
performance cladding Sizes: DN 65 to 900; NPS 2½ to 36
• Reliability ensured by seat design to FCI 70-2 Class VI, enabling it to meet the Press: PN 16 to 160; Class 150 to 900
highest demands with zero tightness Temp: -105°C to 650°C
• Reduced replacement cost, as performance capabilities of valves can be easily (-157°F to 1202°F)
upgraded and coatings can be applied to suit different applications
Argus Refer to literature ARENTB0001
• Improved plant and personnel safety from valve design, which meets fugitive
emission standard ISO 15848 at flowse ve.com/library.

VALVES | BALL
TRUNNION-MOUNTED
HK35
All the benefits of the FK76M in a high-pressure design Designed to meet API-6D, ASME B16.34 and ISO 17292
requirements.
• Extended service life and low operating torques provided by clear separation of SPECIFICATIONS
sealing and bearing functions on both ball and stem Sizes: DN 50 to 500; NPS 2 to 20
• Environmental compliance assured by stem seal design, which meets current Press: PN 160 to 250;
TA-Luft and EPA (method 21) standards Class 1500 to 2500
• Increased plant and personnel safety via fire-safe design and construction th t Temp: -105°C to 650°C
complies with fugitive emission standard ISO 15848 (-157°F to 1202°F)
Argus
• Installation ease enhanced by included DIN ISO mounting plate
Refer to literature ARGBR1111
TRUNNION-MOUNTED
VW1
This API 6D-compliant, welded-body valve seals off both seats at the same time and allows bleeding of the entrapped
cavity pressure (double block and bleed) with the ball in the closed position.
• Reduced fugitive emissions made possible by welded-body construction, which SPECIFICATIONS

eliminates leak paths Sizes: DN 50 to 1600; NPS 2 to 64
• Greater process control and safety assured by dual independent flo ting seat Press: PN 20 to 420; Class 150 to 2500
design, guaranteeing sealing power at any pressure level Temp: -46°C to 220°C (-50°F to 428°F)
• Economical performance due to low torque requirements
• Simplified seal verifi tion made possible by double block and bleed feature Refer to VBEEBR1009 or VBENBR1010
Valbart ® at flowse ve.com/library.
TRUNNION-MOUNTED
VB2 and VB3

The Valbart VB2 and VB3 are repairable, bolted body, side-entry, trunnion-mounted ball valves featuring a fixed ball
and flo ting seat rings. Compliant with API 6D and 6A.
• Greater efficien y, safety and control enabled by pressure-absorbing bearings, SPECIFICATIONS

seat-sealing action at any rated pressure and anti-static design Sizes: DN 25 to 1600; NPS 1 to 64
• Plant and personnel protected by anti-blowout design that ensures the stem is Press: PN 20 to 42; Class 150 to 2500;
retained by the stem cover API 2000 to 10 000
• Environmental compliance assured by zero-emission design Temp: -196°C to 400°C
• Reduced actuation costs, as seat design minimizes the torque required to operate (-320°F to 750°F)
Valbart the valve without losing the sealing power
Refer to VBEEBR1009 or VBENBR1010
flowserve.com 149
BALL
TRUNNION-MOUNTED
Subsea
Quarter-turn ball valve designed for total reliability against internal and external leaks in shallow and deep-water
applications.
• Application flexibility derived from comp tibility with hydraulic actuators, ROV- SPECIFICATIONS
operated gear boxes, and electrical and hydraulic umbilical systems Sizes: DN 50 to 1400; NPS 2 to 56
• Extended life due to robust design that protects against leaks with metal-to-metal Press: PN 20 to 420; Class 150 to
seats, elastomeric and thermoplastic seals, and corrosion-resistant alloy seal housing 2500; API 2000 to 10 000
• Minimized leak paths made possible by body designs plus corrosion-resistant Temp: -46°C to 150°C (-51°F to 302°F)
materials of construction
• Complete safety and functionality compliance ensured by hyperbaric chamber testing Refer to literature VBENBR1005
Valbart (API 6DSS certific tion/API Spec Q1) at flowse ve.com/library.
TRUNNION-MOUNTED
Double Block and Bleed

Side-entry ball valve, with either a bolted or welded body, designed for use in upstream, midstream and downstream oil
and gas applications.
• Initial and installation cost savings owing to reduced structural requirements of design SPECIFICATIONS
that saves both space and weight Sizes: DN 50 to 1200; NPS 2 to 48
• Increased system reliability from single valve with bleed port between two valves Press: PN 20 to 420; Class 150 to 2500
• Improved plant and personnel safety due to anti-blowout stem, fire-safe construction Temp: -196°C to 400°C
and anti-static design (-320°F to 750°F)
Valbart Refer to literature VBENBR1004
TRUNNION-MOUNTED
Cryogenic Ball Valve

Meets demanding end-user requirements for leak rate and fugitive emission performance. Body construction and
flexible trim configu tions ensure proper safe isolation.
• Improved seal performance at extremely low temperatures enabled by isolating SPECIFICATIONS

stem seals from cold media Sizes: DN 25 to 1400; NPS 1 to 56
• Guaranteed optimum leakage resistance in demanding cryogenic applications via Press: PN 20 to 420; Class 150 to 2500
primary energized lip seal Temp: 196°C to 200°C (-320°F to 392°F)
• Increased reliability and safety from automatic discharge of excessive body
pressure by internal self-relieving system (top- and side-entry models only) Refer to literature VBEEBR1002
Valbart

VALVES | BALL
TRUNNION-MOUNTED
Trunnball DL
Full-port process ball valve well-suited for the most challenging operating conditions. Frequently used for isolation or
on-off applications, but equally suitable for control.
• Improved plant and personnel safety provided by the Z-trim option’s excellent SPECIFICATIONS
cavitation control and noise reduction Sizes: DN 150 to 900; NPS 6 to 36
• Reduced maintenance enabled by spring-loaded stem seal packing Press: PN 10 to 40; Class 150 to 300
• Broad application flexibility facilit ted by the extensive size range Temp: -30°C to 250°C (-22°F to 482°F)
• Optimum controllability through the use of a sturdy blowout-proof stem that
provides high torque transmission with minimal mechanical backlash Refer to literature NFENTB4168
NAF
Performance You Can Count On

From the bone-chilling cold of the Arctic to the stifling d y heat of desert
regions to the hot salty air of tropical coasts, Flowserve solutions can
be found anywhere fluid motion and control are mission-critical
Our products excel, even in these challenging environments. And
our fl w control experts are right there with them to provide the
engineering, installation and maintenance support you need to
get the most out of your operations.
RISING STEM
Rising Stem Ball Valve (RSBV)

The oil and gas industry’s choice for applications requiring a mechanically energized metal or soft seat to prevent losses
from process contamination or material leakage. Ideal for frequent cycling.
• Extended service life and low maintenance costs due to unique helix coil stem SPECIFICATIONS
design, which enables friction-free opening and closing Sizes: DN 25 to 600; NPS 1 to 24
• Improved product quality, efficien y and safety with tightness performance up to Press: PN 10 to 320; Class 150 to 2500
ASME FCI-70-2 Class VI Temp: -196°C to 600°C
• Easy in-line inspection and maintenance enabled by top-entry design (-321°F to 1112°F)
• Reduced corrosion due to heavy wall thickness in excess to ASME B16.34
Refer to literature VBENBR1008
Valbart • Improved personnel safety from blowout-proof stem that meets international
standards of API 600 and 6D at flowse ve.com/library.
flowserve.com 151
BALL
LINED
AKH2
Designed to reduce energy and pumping costs, the AKH2 two-piece, full-port design minimizes pressure losses and
increases fl w capacity.
• Minimized downtime and maintenance from long-life seats and large stem sealing SPECIFICATIONS
area, plus substantial middle flanges and molded liner Sizes: DN 15 to 350; NPS ½ to 14
• Reduced energy costs enabled by low frictional coefficients and oper ting torques Press: PN 16; Class 150
• Reduced fugitive emissions made possible by reduction of stem side loads, eliminating Temp: -10°C to 200°C (14°F to 392°F)
potential valve gland leaks
• Increased plant and personnel safety assured by anti-blowout stem and Refer to literature ATENTB0010
Atomac ® anti-static design at flowse ve.com/library.
LINED
AKH2-300
This valve offers the same advantages as the AKH2 series, while meeting the stricter pressure requirements, wall
thickness, face-to-face and flange dimensions of ASME Class 300.
• Enhanced safety derived from ASME Class 300 piping requirements demanded in the SPECIFICATIONS
chlorine and related industries Sizes: DN 25 to 150; NPS 1 to 6
• Low inventory carrying costs and simplified maintenance made possible by the high Press: PN 50; Class 300
degree of interchangeability with the entire AKH2 series Temp: -10°C to 200°C (14°F to 392°F)
Refer to ATETB001 or ATENTB0010 at
Atomac flowse ve.com/library.
LINED
AKH2A
The AKH2A is a short-pattern, full-port lined ball valve that offers the same benefits as the AKH2 at reduced space and
weight. Designed per ASME B16.5 Class 150 flange dimensions and ASME B16.10 face-to-face dimensions.
• Broad application versatility enabled by a variety of metallic and non-metallic ball SPECIFICATIONS
material options as well as available characterized ball for throttling services Sizes: NPS 1 to 6
• Greater application flexibility and decreased structural impact from reduced space Press: Class 150
and weight (compared to the AKH2) Temp: -10°C to 200°C (14°F to 392°F)
• Lower operating costs resulting from high-efficien y performance
• Reduced automation costs due to low turning torque and ISO 5211 universal Refer to literature ATETB001 or
Atomac ATENTB0010 at flowse ve.com/library.
mounting pad

VALVES | BALL
LINED
AKH3
The AKH3 is an ASME B16.10 short-pattern, reduced-port, lined ball valve. The flo ting ball design ensures
bubble-tight shut-off.
• Economical performance and improved process efficien y from bubble-tight SPECIFICATIONS

shutoff across the pressure range of 1 mbar to 19 bar (14.5 to 275 psi) Sizes: NPS 1 to 14
• Long-term external leak protection provided by PTFE chevron packing rings in a Press: Class 150
deep stuffing box substantial body flanges and molded liner sea Temp: -10°C to 200°C (14°F to 392°F)
• Low installation costs, as ASME dimensions permit the replacement of previously
installed valves with no need to alter existing piping Refer to ATETB001 or ATENTB0010
Atomac • Safety assured by blowout-proof stem assembly and anti-static device at flowse ve.com/library.
LINED
AKH5
These full-port, ceramic-lined valves are recommended when nothing else will work in applications with abrasive
slurries, high-temperature corrosives and services with high-temperature fluctu tions.
• Long service life and wear resistance enabled by Mg-PSZ ceramic surfaces that SPECIFICATIONS
resist erosion, corrosion and extreme temperature shock Sizes: DN 25 to 150; NPS 1 to 6
• Increased uptime from minimal cavity space, which significantly reduces Press: PN 16; Class 150
retention of line media and product contamination Temp: -10°C to 350°C (14°F to 662°F)
Atomac • Reduced energy and pumping costs due to full port design, which minimizes
pressure loss and increases fl w capacity Refer to ATETB001 or ATENTB0010
• Shutoff to ASME FCI 70-2 Class IV at flowse ve.com/library.
• Virtually no maintenance and low stem torque enabled by large stem sealing area
LINED
AKH7-KP
Engineered exclusively for glass pipe systems. Available with socket/ball or plane end connections per DN EN 12585 or
DN EN 1092. For flange/glass end connections the AKH7-KPF is available.
• Long service life and high corrosion resistance via FEP- or PFA-molded SPECIFICATIONS
fluorocarbon resin liners (others vailable on request) Sizes: DN 25 to 50; NPS 1 to 2
• Handling of highly viscous fluids or process pplications with high purity Press: For glass connections
requirements enabled by liners’ inert, non-stick properties Temp: -10°C to 200°C (14°F to 392°F)
• Increased plant and personnel safety assured by anti-static design and
anti-blowout stem, plus long-term leak protection provided by PTFE chevron Refer to ATETB001 or ATENTB0010
Atomac at flowse ve.com/library.
packing rings and molded liner/seal
flowserve.com 153
BALL
LINED
AKH8
This full-port monoblock ball valve improves sticky, adhesive and highly viscous fluid pplications, particularly in high
cycling requirements that can cause deterioration in flo ting ball design valves.
• Superior performance in high-viscosity applications made possible by single-piece ball SPECIFICATIONS

and stem unit Sizes: DN 15 to 150; NPS ½ to 6
• Reduced downtime and maintenance enabled by metal-to-metal body joint, which Press: PN 16; Class 150
absorbs destructive pipe vibrations and negative effects of thermal cycling Temp: -10°C to 200°C (14°F to 392°F)
• Greater efficien y provided by larger diameter seats and integral retention lip, which
Atomac minimize fl w turbulence and enhance seat stability Refer to literature ATDEENFL0007
LINED
V-Port
V-Port valves enable you to achieve precise control and modulation of aggressive products without the expense and long
deliveries of exotic alloy valves.
• Greater process control and modulation for throttling applications via characterized SPECIFICATIONS
ball valve Sizes: DN 25 to 150; NPS 1 to 6
• Available in models AKH3, AKH8, AKH2A and AKH2; or in Mg-PSZ ceramic for Press: Varies, depending on valve
model AKH5. Temp: Varies, depending on valve
Refer to literature ATENTB0010
LINED
AMP3
The compact design of this three-way ball valve permits use in corrosive diverter applications with space constraints.
• Lower capital cost in difficult se vices than alloy valves, with equal or superior SPECIFICATIONS
corrosion resistance Sizes: DN 25 to 150; NPS 1 to 6
• Reduced plant operating costs made possible by high-fl w capacity, which Press: PN 16; Class 150
minimizes valve pressure losses Temp: -10°C to 200°C (14°F to 392°F)
• Broad application versatility for a wide variety of 90° or 180° fl w patterns
enabled by L- or T-ball configur tions Refer to ATETB001 or ATENTB0010 at
• Improved efficien y due to flo ting ball seat design which ensures bubble-tight flowse ve.com/library.
Atomac
shutoff across the pressure range

VALVES | BALL
LINED
Sight Glass Series

Atomac sight glasses offer clear visual inspection from either side. An integrated drip lip with a cast core provides
visual fl w indication, even at low velocity. Available in standard, three-way and four-way models.
• Convenience, efficien y and ease of visual inspection enabled by sight glass on SPECIFICATIONS
either side Sizes: DN 25 to 150; NPS 1 to 6
• High durability of inspection apertures assured by borosilicate glass, utilized to Press: PN 16; Class 150
withstand high temperatures, mechanical stress and corrosion per DIN 7080 Temp: -10°C to 200°C (14°F to 392°F)
• Long service life and high corrosion resistance due to thick, uniform, blowhole-
free FEP or PFA liners for all non-glass internal components Refer to ATETB001 or ATENTB0010
LINED
AKH6 Fully Lined Tank Drain

Primarily used for tank drainage, AKH6 valves are also commonly installed in place of reducing spools to downsize
piping dimensions.
• Lower energy and pumping costs facilitated by larger inlet port and full-port SPECIFICATIONS
design, which minimizes pressure loss and increases fl w capacity Sizes: DN 25x50 to 150x200;
• Improved handling of highly viscous or high-purity services assured by inert, non- NPS 1x2 to 6x8
stick liners Press: PN 16; Class 150
• Reduced downtime and easy maintenance made possible by interchangeability of Temp: -10°C to 200°C (14°F to 392°F)
all internal components and spare parts with entire AKH2 series
Atomac Refer to ATETB001 or ATENTB0010
TOP-ENTRY
McCANNASEAL
A high-performance, top-entry, metal- or soft-seated ball valve designed for use in PTA production and other general
applications. Ideal for remote operations with high-cycle frequency.
• Reliable operation assured by sealing of carbon graphite seat, with wedge design SPECIFICATIONS
for consistently “clean” finished produc Sizes: DN 15 to 450; NPS ½ to 18
• Economical performance via quarter-turn and low torque for compatibility with Press: PN 20 to 260; Class 150 to 1500
cost-effective actuators Temp: -196°C to 815°C
• Improved personnel safety with fire-seal se ts and two-way shutoff (-320°F to 1500°F)
• Fast, easy maintenance enabled by top-entry design that permits in-line service
and emergency entrance in minutes Refer to literature MMENBR1015 at
McCANNA flowse ve.com/library.
• Longer service life from engineered design that maximizes seal and seat lives
flowserve.com 155
BALL
TOP-ENTRY
VT1
An in-line repairable valve that assures bi-directional sealing with two independent flo ting seats. Double block and bleed
feature, fire-safe design and anti bl w-out stem.
• Increased efficien y enabled by independent ball and stem, which minimizes side SPECIFICATIONS
thrust caused by pressure on the ball Sizes: DN 50 to 1400; NPS 113∕16 to 16¾
• Improved safety assured by anti-static design that guarantees electrical continuity Press: PN 20 to 420; Class 150 to 2500;
between all metallic components API 2000 to 10 000
• Simplified in-line inspection and maintenance made possible by top-ent y design Temp: -196°C to 400°C
• Compliance with the most severe pollution-control regulations owing to (-320°F to 750°F)
Valbart low-emission valves
Refer to VBEEBR1009 or VBENBR1010
Your Partner in Safety – Valves for O2 Service

The inherent danger of oxygen and oxygen-enriched applications
poses particular safety hazards to your plant and personnel.
Flowserve can help mitigate these risks. Our global network of
oxygen-trained personnel is ready to work with you to ensure
the valves used in your process meet or exceed industry
requirements for safety and performance. Whether your
application calls for on-off or control valves, Flowserve
can provide consistently safe results.

VALVES | BALL
flowserve.com 157
Big Max BX2001

VALVES | BUTTERFLY
BUTTERFLY
Ideal for precision throttling and on-off applications, especially in lighter-weight piping
systems, the Flowserve family of butterfly valves is often specifi d for its versatility.
Outstanding throttling accuracy for process control is achieved through low-friction, erosion-
resistant sealing surfaces with very low operating torques. A broad range of applications
can be met via metal- and soft-seated designs as well as lined versions for corrosive and
hygienic applications.
Butterfly – Quick Reference

DN 50 to 900 PN 10 to 40 -73°C to 288°C

Big Max ® BX2001 Double-Offset
NPS 2 to 36 Class 150 and 300 (-100°F to 550°F)
DN 80 to 1500 PN 20 to 260 -196°C to 820°C

TX3 Triple-Offset
DN 80 to 700 PN 10 to 40 -30°C to 350°C

Torex™ Triple-Offset
NPS 3 to 28 Class 150 and 300 (-22°F to 662°F)
DN 50 to 600 PN up to 10 177°C
BTV Lined
NPS 2 to 24 Up to 150 psi (350°F)
DN 50 to 600 PN 10 to 20 -10°C to 140°C

Slimseal ® Lined
NPS 2 to 24 Class 125 to 150 (14°F to 284°F)
flowserve.com 159
BUTTERFLY
DOUBLE-OFFSET
Big Max BX2001

High-performance, all-purpose valve designed for precise throttling control or on-off service with lighter weight piping
systems and less expensive, energy-efficient actu tors.
• Broad application versatility via numerous design options: wafer and lug SPECIFICATIONS
bodies; standard PFA, optional UHMWPE and fire-sealed versions; and multiple Sizes: DN 50 to 900; NPS 2 to 36
packing options Press: PN 10 to 40; Class 150 and 300
• Reduced fugitive emissions through triple-leak protection of primary stem seal Temp: -73°C to 288°C
plus two optional secondary seals (-100°F to 550°F)
• Increased capacity and improved fl w control with low-profile double-offset disc
• Improved personnel and plant safety with anti-blowout protection per API 609 Refer to literature DVENTB0039
TRIPLE-OFFSET
TX3
The TX3 boasts reliable, long-lasting, zero-leakage shutoff — even in gas applications. It has obtained numerous industry
certific tions, so it can be used around the world. Multiple valve body configur tions available.
• Greater process control with API 598 Zero Leakage (bubble-tight) shutoff assured by SPECIFICATIONS
triple-offset design and laminated metal-graphite seat seal Sizes: DN 80 to 1500; NPS 3 to 60
• Extended service life and outstanding throttling accuracy due to low operating torque Press: PN 20 to 260; Class 150 to 1500
resulting from the low-friction, low-wear elliptical sealing surfaces Temp: -196°C to 820°C
• Environmental compliance achieved by packing options that meet stringent fugitive (-320°F to 1500°F)
emissions requirements
Durco • Improved safety with API 607 fire-safe design plus API 609/ASME B16.34 anti-blowout Refer to literature DVENBR0061
shaft at flowse ve.com/library.
TRIPLE-OFFSET
Torex
High-performance, triple-offset, metal- or soft-seated butterfly valve frequently used for isol tion or on-off
applications, but equally suitable for control, especially on high-fl w, low-pressure applications.
• Longer service life provided by triple-offset design, which minimizes seat wear SPECIFICATIONS
during opening and closing Sizes: DN 80 to 700; NPS 3 to 28
• Minimized pressure loss and low energy costs due to tight shut-off Press: PN 10 to 40 Class 150 and 300
• Low installation costs enabled by compact wafer design and low weight Temp: -30°C to 350°C (-22°F to 662°F)
• Improved safety assured by Safety Integrity Level (SIL) 3 and IEC 61508 certific tions
• Increased uptime — even in difficult media and demanding pressures — through Refer to literature Fk41.42
excellent design, materials and performance characteristics at flowse ve.com/library.
NAF

VALVES | BUTTERFLY
LINED
BTV
Reliable, leak-free service valve designed for a wide range of demanding requirements in corrosive chemical
applications and process industries.
• Reduced downtime through the standard lined body and disc that defends against SPECIFICATIONS
the most corrosive chemicals Sizes: DN 50 to 600; NPS 2 to 24
• Lower maintenance costs from the triple-seal design and live-loaded shaft seal Press: PN up to 10; up to 150 psi
that never needs adjustment Temp: up to 177°C (350°F)
• Increased application flexibility provided by a large selection of metal discs for
use when greater protection is required Refer to literature DVENBR0020
• Increased abrasion resistance in applications up to 93°C (200°F) with optional at flowse ve.com/library.
Durco UHMWPE disc and body
LINED
Slimseal
High-performance, “fit and forget” wafer-type valve with integrally molded body liner designed specifically for
corrosive services and hygienic applications.
• Increased uptime compared to loose liners resulting from integrally molded SPECIFICATIONS
elastomer body liner that is not prone to stretching Sizes: DN 50 to 600; NPS 2 to 24
• Low maintenance requirements from liner construction that is designed to last Press: PN 10 to 20; Class 125 to 150
throughout the entire valve lifecycle Temp: -10°C to 140°C (14°F to 284°F)
• Reduced operating costs due to primary and secondary stem seal that prevents
ingress of foreign material into valve Refer to literature SRENTB0006
Serck Audco ®
• Installation speed and simplicity enabled by a gasket that is integral to the body, at flowse ve.com/library.
and the body liner that eliminates potential for damage to expensive seats
flowserve.com 161
TMCBV
162

VALVES | ROTARY CONTROL
ROTARY CONTROL
Long life in severe conditions characterizes this flexible range of plug, ball and butterfly
control valves. Precision control can be realized across a range of harsh applications,
including fibrous slurries, entrained particles, steam and high-pressure/temperature liquids
and gases. Users find numerous performance advantages, from reduced cavitation and
flashing to low noise levels, as well as safety assurances from tight shut-off features and
designs certifi d to the latest, global safety standards.
Rotary Control – Quick Reference

DN 25 to 300 PN 10 to 63 -100°C to 400°C
MaxFlo® 4 Eccentric Plug
DN 25 to 400 PN 10 to 63 -46°C to 316°C

ShearStream™ HP Segmented Ball
DN 25 to 700 PN 10 to 40 -30°C to 250°C

Setball™ Segmented Ball
DN 25 to 250 PN 10 to 40 -30°C to 250°C

Setball SF Segmented Ball
High-Performance DN 50 to 750 PN 10 to 400 -196°C to 649°C

Valdisk Butterfl NPS 2 to 30 Class 150 to 2500 (-320°F to 1200°F)

Valdisk TX3 Butterfl NPS 3 to 60 Class 150 to 1500 (-320°F to 1500°F)

Torex Butterfl NPS 3 to 28 Class 150 and 300 (-22°F to 662°F)
Trunnion-Mounted DN 75 to 1400 Class 150 to 2500 -196°C to 450°C

TMCBV Control Ball NPS 3 to 56 API 3000, 5000, 10 000 (-320°F to 842°F)
Trunnion-Mounted DN 150 to 900 PN 10 to 40 -30°C to 250°C

Trunnball DL Control Ball NPS 6 to 36 Class 150 to 300 (-22°F to 482°F)
DN 8 to 100 PN 20 to 110 -29°C to 427°C

CPT Floating Control Ball
NPS ¼ to 4 Class 150 to 600 (-20°F to 800°F)
DN 25 to 400 PN 10 to 40 -30°C to 350°C

Duball DL Floating Control Ball
flowserve.com 163
ROTARY CONTROL
ECCENTRIC PLUG
MaxFlo 4
Cost-competitive, high-performance general service control valve designed for applications demanding higher rangeability,
precise control and higher fl w capacity.
• Economical performance with the highest rated Cv (as much as 70% more than SPECIFICATIONS
competitors), which sometimes allows for smaller sizes to be used Sizes: DN 25 to 300; NPS 1 to 12
• Longer service life and more precise control enabled by the robust polygon Press: PN 10 to 63; Class 150 to 600
shaft/plug connection Temp: -100°C to 400°C
• Low maintenance costs due to double-offset eccentric plug design that reduces (-148°F to 750°F)
seat wear while providing reliable Class IV (metal seat) and VI (soft seat) shutoff
Valtek Refer to literature VLENBR0064
• Improved safety with superior shaft blow-out protection from the ASME B16.34
shaft design at flowse ve.com/library.
SEGMENTED BALL
ShearStream HP
Rugged segmented ball valve designed to withstand harsh, particle-entrained processes found in the power, chemical, and
oil and gas industries.
• Increased uptime enabled by a durable, long-lasting design that easily handles SPECIFICATIONS
abrasive, erosive and corrosive fluids Sizes: DN 25 to 400; NPS 1 to 16
• Broad application versatility enabled by exceptional control and rangeability Press: PN 10 to 63; Class 150 to 600
• High-capacity and large turndown performance due to unrestricted straight-through Temp: -46°C to 316°C (-50°F to 600°F)
port design
Valtek Refer to literature VLEEBR0027
• High-pressure drop capability with the optional spring-loaded, heavy-duty seat, which
provides reliable Class IV (metal seat) and Class VI (resilient UHMWPE seat) shutoff at flowse ve.com/library.
SEGMENTED BALL
Setball
Cost-competitive general service V-port ball valve that offers excellent rangeability and high-fl w capacity.
• High control accuracy over wide range and under severe conditions provided by SPECIFICATIONS
V-shaped sector Sizes: DN 25 to 700; NPS 1 to 28
• Low lifecycle and maintenance costs due to the ability to use low operating torque Press: PN 10 to 40; Class 150 to 300
actuators Temp: -30°C to 250°C (-22°F to 482°F)
• Versatile design that combines the best control characteristics of ball and butterfly
valves, allowing it to function as a control and shutoff valve Refer to literature Fk 41.51(19)
• Application versatility made possible by specialized materials and stem seal options at flowse ve.com/library.
NAF

SEGMENTED BALL
Setball SF
Cost-effective general services V-port ball valve that combines compact size, excellent control characteristics and
high-fl w capacity.
• Low total cost of ownership provided by compact face-to-face dimension and SPECIFICATIONS
weight reduction
Sizes: DN 25 to 250; NPS 1 to 10
• Lower operating costs due to dual low-friction bearings and specially designed
Press: PN 10 to 40; Class 150 to 300
seat that make it possible to use a smaller actuator
Temp: 30°C to 250°C (-22°F to 482°F)
• Environmental regulatory compliance enabled by one-piece, leak-proof, wafer-
style body that minimizes leakage paths Refer to literature NFENTB4156
• Optimum control performance provided by a stem with a splined transmission at flowse ve.com/library.
NAF to the ball sector
• High-performance in a compact size due to direct actuator mounting
H I G H - P E R F O R M A N C E B U T T E R F LY
Valdisk
Heavy-duty design engineered for high-capacity and low-pressure loss. Ideal for fibrous slurries liquids, and gas and
steam applications under extreme pressures and temperatures.
• High-performance throttling, even in large pressure drops close to the seat, SPECIFICATIONS
enabled by high-thrust cylinder actuator coupled with eccentric-cammed disc Sizes: DN 50 to 750; NPS 2 to 30
• Greater throttling accuracy assured by low breakout torque provided by jam-lever Press: PN 10 to 400; Class 150 to 2500
toggle seating Temp: -196°C to 649°C
• Superior process control with bi-directional, bubble-tight shutoff at high and low (-320°F to 1200°F)
Valtek pressure drops
• Reduced maintenance costs made possible by double-offset disc design, which Refer to literature VLATB010
minimizes seat and disc wear plus reduces leakage at flowse ve.com/library.
Valdisk TX3
The TX3 boasts reliable, long-lasting, zero-leakage shutoff — even in gas applications. It has obtained numerous
industry certific tions, so it can be used around the world. Multiple valve body configur tions available.
• Greater process control with API 598 zero-leakage (bubble-tight) shutoff assured SPECIFICATIONS
by triple-offset design and laminated metal-graphite seat seal Sizes: DN 80 to 1500; NPS 3 to 60
• Extended service life and outstanding throttling accuracy due to low operating Press: PN 20 to 260; Class 150 to 1500
torque resulting from the low-friction, low-wear elliptical sealing surfaces Temp: -196°C to 820°C
• Environmental compliance achieved by packing options that meet stringent (-320°F to 1500°F)
Valtek fugitive emissions requirements
• Improved safety with API 607 fire-safe design plus API 609/ASME B16.34 Refer to literature VLENBR0061
anti-blowout shaft at flowse ve.com/library.
flowserve.com 165
ROTARY CONTROL
Torex
High-performance, triple-offset, metal- or soft-seated butterfly valve Frequently used for isolation or on-off
applications but equally suitable for control, especially on high-fl w, low-pressure applications.
• Longer service life provided by triple-offset design which minimizes seat wear during SPECIFICATIONS
opening and closing Sizes: DN 80 to 700; NPS 3 to 28
• Cost-effectiveness provided by compact wafer design and low weight Press: PN 10 to 40; Class 150 and 300
• Improved safety assured by Safety Integrity Level (SIL) 3 and IEC 61508 certific tions Temp: -30°C to 350°C (-22°F to 662°F)
• Increased uptime — even in difficult media and demanding pressures — through
excellent design, materials and performance characteristics Refer to literature Fk 41.42(17)
NAF
TRUNNION-MOUNTED CONTROL BALL
TMCBV
Cost-efficient compact gas valve that provides excellent fl w capacity and high rangeability.
• Improved plant and personnel safety through excellent noise attenuation provided by SPECIFICATIONS
industry-proven technologies Sizes: DN 75 to 1400; NPS 3 to 56
• Installation ease in tight piping runs enabled by small valve size Press: Class 150 to 2500;
• Cost savings due to small actuator and lightweight pipe supports API 3000, 5000 and 10 000
• High-fl w capacity offered in compact design via small valve and actuator sizes, Temp: -196°C to 450°C
system support and isolation (-320°F to 842°F)
Valbart
Refer to literature VLENBR0067
TRUNNION-MOUNTED CONTROL BALL
Trunnball DL
Full-port process ball valve well suited for the most challenging operating conditions. Frequently used for isolation or on-off
applications, but equally suitable for control.
• Improved plant and personnel safety provided by the Z-trim option’s excellent SPECIFICATIONS
cavitation control and noise reduction Sizes: DN 150 to 900; NPS 6 to 36
• Reduced maintenance enabled by spring-loaded stem seal packing Press: PN 10 to 40; Class 150 to 300
• Broad application flexibility facilit ted by the extensive size range Temp: -30°C to 250°C (-22°F to 482°F)
• Optimum controllability through the use of a sturdy blowout-proof stem that provides
Refer to literature NFENTB4168
NAF high torque transmission with minimal mechanical backlash

F L O AT I N G C O N T R O L B A L L
CPT
Rugged and accurate general service valve designed for use in harsh throttling conditions and applications requiring
precise computer controls.
• Extremely accurate control through efficient straight-through fl w, rotary shaft SPECIFICATIONS

sealing and bubble-tight shutoff Sizes: DN 8 to 100; NPS ¼ to 4
• Smooth, stable throttling control due to lubricating action of special coating on ball Press: PN 20 to 110; Class 150 to 600
and TFE/graphite impregnation throughout the thickness of the characterized seat Temp: -29°C to 427°C (-20°F to 800°F)
• Reduced maintenance costs and time due to the use of fewer parts
Worcester • Precise fit to m tch unique control needs through virtually limitless seat designs Refer to literature WCENBR1001
F L O AT I N G C O N T R O L B A L L
Duball DL
Rugged, high-performance general service valve designed for operating conditions where severe demands are made
on the design, materials and performance. Available with metal or soft seats.
• Lower maintenance costs and time as well as improved safety with spring-loaded SPECIFICATIONS
stem seal packing Sizes: DN 25 to 400; NPS 1 to 16
• High performance enabled by the direct actuator mounting capabilities of the Press: PN 10 to 40; Class 150 to 300
Turnex actuator Temp: -30°C to 350°C (-22°F to 482°F)
• Excellent control, noise reduction and cavitation enabled by unique Z-trim option
• Easy installation and replacement as a result of the off-center joint face of the Refer to literature NFENTB4167
NAF at flowse ve.com/library.
valve body
Fast and Accurate Valve Selection and Sizing

Significantly reduce control valve sizing and selection errors and improve
decision accuracy in record time with Performance!™ Valve Sizing
and Selection Suite. It puts the power of on-demand control valve
selection and sizing at your fingertips With minimal application
data — expected fl w, pressure, temperature, process media
and line size — Performance! identifies the Fl wserve control
valve, actuators and positioners best suited for your application
and services conditions. It’s the right tool for the finding the
right product — the first time every time.
flowserve.com 167
Mark One
168

VALVES | LINEAR CONTROL
LINEAR CONTROL
Ideal for high-accuracy flow control, the Flowserve family of globe/angle linear control
valves can be applied from general service to severe applications for both gas and
liquids. They are ideal for frequent operation due to their excellent position accuracy and
repeatability. Precision control is repeatedly achieved via longer strokes and assured
actuator response. Users can satisfy a range of requirements, with choices ranging from
cryogenic and high-temperature designs to low noise and anti-cavitation trims.
Linear Control – Quick Reference*

DN 15 to 915 PN 10 to 400 -196°C to 815°C

Mark One™ Linear Globe/Angle
Mark One DN 15 to 300 PN 10 to 400 -196°C to 400°C

Linear Globe/Angle
Three-Way NPS ½ to 12 Class 150 to 2500 (-320°F to 1500°F)
DN up to 300 PN 50 to 100 -196°C to 815°C

Mark One-X Linear Globe/Angle
NPS up to 12 Class 300 to 600 (-320°F to 1500°F)
DN 150 to 915 PN 10 to 100 -196°C to 815°C

Mark 100 Linear Globe/Angle
DN 50 to 750 PN 160 to 400 -196°C to 815°C

Mark 200 Linear Globe/Angle
DN 15 to 150 PN 10 to 400 -196°C to 815°C

Mark Two™ Linear Globe/Angle
NPS 1/2 to 6 Class 150 to 2500 (-320°F to 1500°F)
DN 25 to 500 PN 10 to 400 -196°C to 815°C

Mark Eight™ Linear Globe/Angle
DN 15 to 150 PN 10 to 40 -46°C to 425°C

FlowTop™ GS Linear Globe/Angle
DN 15 to 400 PN 10 to 40 -46°C to 425°C

FlowTop Linear Globe/Angle
flowserve.com 169
Linear Control – Quick Reference, cont’d.
HpFlow 011000 NW 16 to 24 ND 325 to PN 4000 -40°C to 250°C

Linear Globe/Angle
and 015000 NPS ½ to 1 Class 600 to 60 000 psi (-40°F to 482°F)
LinedFlow™ DN 15 to 150 PN 16 -20°C to 200°C

Linear Globe/Angle
132000 NPS ½ to 6 Class 150 (-4°F to 392°F)
TotalFlow DN 25 to 200 PN 16 to 400 -196°C to 700°C

Linear Globe/Angle
035000 NPS 1 to 8 Class 150 to 2500 (-321°F to 1292°F)
TotalFlow DN 25 to 200 PN 63 to 250 -196°C to 700°C

Linear Globe/Angle
335000 NPS 1 to 8 Class 600 to 1500 (-40°F to 1292°F)
ColdFlow DN 25 to 200 PN 16 to 100 -196°C to 100°C

Linear Globe/Angle
041000A NPS 1 to 8 Class 150 to 600 (-321°F to 212°F)
ColdFlow DN 4 to 200 PN 16 to 63 -269°C to 100°C

Linear Globe/Angle
341000 NPS 0.16 to 8 Class 150 to 400 (-452°F to 212°F)
SmallFlow™ PN 400 -40°C to 700°C

Linear Globe/Angle NPS ¼
080000 Class 2500 (40°F to 1292°F)
SmallFlow DN 15 to 25 PN 16 to 400 -196°C to 700°C

Linear Globe/Angle
385000 NPS ½ to 1 Class 150 to 2500 (-321°F to 1292°F)
CleanFlow™ DN 15 to 100 PN 16 to 25 -40°C to 150°C

Linear Globe/Angle
191000 NPS ½ to 4 Class 150 -40°F to 302°F
DrainFlow DN 15 to 200 PN 16 to 40 -40°C to 200°C

Linear Globe/Angle
051000 NPS ½ to 8 Class 150 to 300 (-40°F to 392°F)

LINEAR CONTROL
VALVES | LINEAR GLOBE/ANGLE

LINEAR GLOBE/ANGLE
Mark One
Superior performance in liquid and gaseous services, with easy, fast and inexpensive maintenance.
• Reliable performance provided by the position accuracy, repeatability and assured SPECIFICATIONS
response from the positioner plus the stiff and high-thrust, spring-cylinder actuator Sizes: DN 15 to 915; NPS ½ to 36
• Significant pplication flexibility offered by a broad solutions envelope and a wide Press: PN 10 to 400; Class 150 to 2500
variety of trim options to eliminate cavitation damage and abate noise Temp: -196°C to 815°C
• Installation and maintenance ease resulting from compact, light-weight package (-320°F to 1500°F)
• Lower maintenance and spare inventory costs facilitated by the clamped-in seat
and top-entry trim plus a high degree of parts interchangeability Refer to literature VLENTB0001
Valtek
LINEAR GLOBE/ANGLE
Mark One Three-Way

A three-way version of the Mark One, this valve is used for combining or diverting service. Like the Mark One, it
offers superior performance in liquid and gaseous services in simple, rugged design.
• Reliable performance provided by the position accuracy, repeatability and assured SPECIFICATIONS
response from the positioner plus the stiff and high-thrust, spring-cylinder actuator Sizes: DN 15 to 300; NPS ½ to 12
• Enhanced process control due to exceptionally tight shutoff Press: PN 10 to 400; Class 150 to 2500
• Reduced inventory carrying costs owing to a high degree of interchangeability with Temp: -196°C to 400°C
Mark One Series valves (-320°F to 752°F)
• Fast, easy and inexpensive maintenance facilitated by compact, lightweight body
Refer to literature VLENTB0001
Valtek and actuator package plus clamped-in seat and top-entry trim
LINEAR GLOBE/ANGLE
Mark One-X
The Mark One-X offers a cost-effective means of installing a small valve in a much larger line without line reducers
or expanders. It is identical to a standard Mark One except for its body, which has expanded outlets.
• Lower valve and installation costs made possible by using a smaller, lighter valve SPECIFICATIONS
and eliminating line expanders and reducers (plus their associated welding and Sizes: DN up to 300; NPS up to 12
radiography requirements) Press: PN 50 to 100; Class 300 to 600
• Reliable performance provided by the position accuracy, repeatability and assured Temp: -196°C to 815°C
response from the positioner plus the stiff and high-thrust, spring-cylinder actuator (-320°F to 1500°F)
• Reduced downtime with clamped-in seat and self-aligning seat ring
Refer to literature VLATB100
Valtek • Decreased inventory carrying costs from a high degree of interchangeability with
Mark One Series valves at flowse ve.com/library.
flowserve.com 171
LINEAR CONTROL
LINEAR GLOBE/ANGLE
Mark 100
A large control valve designed for larger size applications. Suited for maximum capacity Cv and severe applications in
both gas and liquid services.
• Cost-effective performance, as higher Cv capacity allows for smaller valve sizes SPECIFICATIONS
• Superior process control made possible by long stroke lengths, the position Sizes: DN 150 to 915; NPS 6 to 36
accuracy, repeatability and assured response from the positioner, and the stiff and Press: PN 10 to 100; Class 150 to 600
high-thrust, spring-cylinder actuator Temp: -196°C to 815°C
• Reduced downtime with the clamped-in seat and self-aligning seat ring (-320°F to 1500°F)
• Severe service application versatility provided by a wide variety of noise
Refer to literature FCATB0100
Valtek abatement and anti-cavitation trims
LINEAR GLOBE/ANGLE
Mark 200
Designed for gas and liquid control while significantly reducing noise and c vitation. Ideal for high-fl w, high-pressure
and extreme temperature applications in the oil and gas and power industries.
• Cost-effective and significantly smaller and lighter design th t outperforms SPECIFICATIONS

competing brands Sizes: DN 50 to 400; NPS 2 to 16
• Greater severe service protection with finer control provided by larger galleries Press: PN 160 to 400;
and longer strokes Class 900 to 2500
• Improved safety and reduced maintenance costs derived from a broad spectrum Temp: -196°C to 815°C
of severe service trim solutions for noise abatement and cavitation control (-328°F to 1500°F)
Valtek • Easy, low-cost maintenance and extremely tight shutoff made possible by the
clamped-in seat and self-aligning seat ring Refer to literature VLENTB0200
LINEAR GLOBE/ANGLE
Mark Two
Fabricated from bar stock, the Mark Two is an extremely versatile automatic control valve. It is available in many
different configur tions with short lead times, especially for high-pressure classes or special alloys.
• Application versatility arising from numerous body styles, end connections, SPECIFICATIONS
bonnet types and materials of construction Sizes: DN 15 to 150; NPS 1/2 to 6
• Reduced maintenance owing to top-entry trim with clamped-in seat ring and Press: PN 10 to 400; Class 150 to 2500
double stem-guided design, which eliminates contact between the plug and Temp: -196°C to 815°C
seat retainer (-320°F to 1500°F)
• Parts interchangeability with Mark One Series valves
Refer to literature VLATB106
Valtek • Available cryogenic extended bonnet handles temperatures down to
-253°C (-423°F) at flowse ve.com/library.

LINEAR GLOBE/ANGLE
Mark Eight
The Mark Eight features a unique Y-style globe body that provides higher fl w capacities and less process turbulence
than conventional globe valves.
• Lower valve recovery factor and higher Cv per given size over traditional globe SPECIFICATIONS
style valves due to the nearly straight-through passage of the Y-style body Sizes: DN 25 to 500; NPS 1 to 20
• Significantly reduced noise and vibr tion owing to less restrictive body style, Press: PN 10 to 400; Class 150 to 2500
which generates less line turbulence Temp: -196°C to 815°C
• Easy, low-cost maintenance and extremely tight shutoff made possible by (-320°F to 1500°F)
clamped-in seat and self-aligning seat ring
• Decreased inventory carrying costs from a high degree of interchangeability Refer to literature VLENTB0008
Valtek with Mark One Series valves at flowse ve.com/library.
LINEAR GLOBE/ANGLE
FlowTop GS
The FlowTop GS control valve (types V746 and V748) is a fully integrated valve-actuator-instrumentation package for
continuous process fl w loop control throughout the plant.
• High fl w rates with excellent rangeability, repeatability and fine control SPECIFICATIONS
• Standard clamped seat rings offer tight shut-off and simple removal; no galling Sizes: NPS ½ to 6 (DN 15 to 150)
problems related to threaded seat rings Press: Class 150 to 300 (PN 10 to 40)
• Direct-mounted digital positioners do not require pneumatic tubing (air-to-open) Temp: -46°C to 425°C (-50°F to 797°F)
• Wide application range owing to trim and material options
• Quick installation and simple setup by maintenance technicians without the need Refer to literature VLENTB8610
for instrument or process engineering skills at flowse ve.com/library.
Valtek • Anti-noise and anti-cavitation trim designs available
LINEAR GLOBE/ANGLE
FlowTop
The FlowTop control valve (types V726, V738, V740) is a high-performance, general application valve coupled with the
high-thrust FlowAct pneumatic diaphragm actuator and an engineered threaded seat ring, enabling tight shut-off.
• Superior control in liquid and gaseous services due to the integrated design of SPECIFICATIONS
valve body, pneumatic actuator and digital positioner Sizes: NPS ½ to 16 (DN 15 to 400)
• Digital positioners are direct-mounted without the need for pneumatic tubing Press: Class 150 to 300 (PN 10 to 40)
(air-to-open) Temp: -46°C to 425°C (-50°F to 797°F)
• Application versatility and reduced spare inventories owing to modular design
• Low total cost of ownership derived from rugged design and inexpensive Refer to SAENTBV738, SAENTBV740,
SAENTBV726 at flowse ve.com/
Valtek maintenance
• Anti-noise and anti-cavitation trim designs available library.
flowserve.com 173
LINEAR CONTROL
Giants of Offshore Production

When building the world’s largest FPSOs, capable of producing
500 000 barrels of oil per day, ExxonMobil chose Flowserve
pump and valve control systems for its Kizomba A and B
flo ting platforms. Drawing on decades of offshore experience,
Flowserve provided 74 high-performance pump systems
and 360 control valves. Most were custom engineered to
accommodate the weight and space parameters of
the project.
LINEAR GLOBE/ANGLE
HpFlow 011000 and 015000

Split-body control valves well-suited for high-pressure (HpFLow 015000) and extreme-pressure (HpFlow 011000)
services in the chemical industry and injection applications. Available in numerous materials.
• Reliable high-pressure and extreme-pressure performance made possible by SPECIFICATIONS

unique split-body design that allows seat to be clamped between body parts
Sizes: NW 16 to 24; NPS ½ to 1
• Application flexibility enabled by a wide range of vailable materials, plus high-
Press: ND 325 to PN 4000;
pressure (IG standard) or ASME flange connections
Class 600 to 60 000 psi
• Longer service life and reduced noise provided by multistage, high-pressure
Temp: -40°C to 250°C (-40°F to 482°F)
letdown valve option
Refer to literature KMEEBR1120
Kämmer at flowse ve.com/library.
LINEAR GLOBE/ANGLE
LinedFlow 132000
This plastic-lined valve for corrosive applications features an advanced PTFE bellows design, enabling a standard
pressure rating of PN 16. Ideal for chemical and mining applications.
• Economical operation due to high-quality lining materials and increased SPECIFICATIONS

fl w capacity
Sizes: DN 15 to 150; NPS ½ to 6
• Broad application versatility assured by a wide variety of liner materials,
Press: PN 16; Class 150
including PTA, FEP, PP, PVDF ETFE and antistatic PFA
Temp: -20°C to 200°C (-4°F to 392°F)
• Improved plant and personnel safety from anti-blowout stem design, plus
superior connection between body and liner Refer to literature KMENBR3221
• Reliable and consistent performance as a result of excellent reproduceable at flowse ve.com/library.
Kämmer trims, even for very small coefficient of flow (Cv) values
• Ease of maintenance and replacement provided by threaded plug and
seat design

LINEAR GLOBE/ANGLE
TotalFlow 035000
The TotalFlow 035000 is the most versatile Kämmer globe valve design. It is suitable for general service applications
with special requirements and more. Custom modific tions and variations available on request.
• Robust, reliable performance with broad flexibility made possible via a variety of SPECIFICATIONS
body and material configur tions (ANSI or DIN in globe, angle or three-way valve Sizes: DN 25 to 200; NPS 1 to 8
designs) Press: PN 16 to 400; Class 150 to 2500
• Greater process control assured by excellent control accuracy, rangeability and Temp: -196°C to 700°C
repeatability (-321°F to 1292°F)
• Severe service application versatility provided by a wide variety of noise
abatement and anti-cavitation trims Refer to literature KMENBR3520
Kämmer • Environmental compliance with German clean air act (TA-Luft) at flowse ve.com/library.
LINEAR GLOBE/ANGLE
TotalFlow 335000
Designed for medium- and high-pressure applications where threaded seats are not acceptable — especially
in the oil and gas, power and chemical industries — this valve complements the Valtek Mark One and Severe
Service Multi-Z valve series.

• Low initial cost, installation ease and broad application flexibility made possible SPECIFICATIONS
by modular parts and material configur tions
Sizes: DN 25 to 200; NPS 1 to 8
• Ease of maintenance in extreme temperatures, without special tools, enabled by
retained seat design
Temp: -196°C to 700°C
• Greater process control via clamped seat with cage-guided plug head
(-40°F to 1292°F)
• Longer, industry-leading service life from superior bellows seal designs capable
of exceeding one million cycles (depending on pressure and temperature) Refer to literature KMENBR3530
• Severe service application versatility provided by a wide variety of noise at flowse ve.com/library.
Kämmer
abatement and anti-cavitation trims
LINEAR GLOBE/ANGLE
ColdFlow 041000A
An updated version of the proven ColdFlow 041000 low-temperature control valve series, improving performance for
air separation units and LNG plants. Optional soft seat inserts available for non-oxygen applications.
• Greater process control with lower heat transfer via improved plug and SPECIFICATIONS
plug-guiding design Sizes: DN 25 to 200; NPS 1 to 8
• Low-temperature performance made possible by extended bonnet that protects Press: PN 16 to 100; Class 150 to 600
packing, gaskets and seals from cryogenic temperatures Temp: -196°C to 100°C
• Extreme temperature capability down to -196°C (-321°F; 77°K) with optional (-321°F to 212°F)
gaskets and packings
• Ease of maintenance facilitated by top-entry design in valves up to DN 100 and Refer to literature KMENTB4114
Kämmer NPS 4, plus modular configur tion at flowse ve.com/library.
flowserve.com 175
LINEAR CONTROL
LINEAR GLOBE/ANGLE
ColdFlow 341000
Cryogenic control valves for helium liquefic tion and other liquefied gases t temperatures as low as 269°C
(-452°F; 4°K). Used in accelerator research institutes as well as fusion reactors.
• Extremely low-temperature and vacuum capabilities enabled by body and SPECIFICATIONS

extension design Sizes: DN 4 to 200; NPS 0.16 to 8
• Ease of maintenance via top-entry design with integrated seat, plus modular Press: PN 16 to 63; Class 150 to 400
configur tion Temp: -269°C to 100°C
• Superior sealing provided by standardized PCTFE plug tip (-452°F to 212°F)
• Lower energy consumption due to minimized heat transfer and water vapor
transmission Refer to literature KMDETB4104
Kämmer • Reliable performance assured by metal bellows seal at flowse ve.com/library.
LINEAR GLOBE/ANGLE
SmallFlow 080000
This micro-fl w valve (NPS ¼) with a compact and lightweight actuator is perfect for laboratory, pilot plant, industrial
R&D and chemical injection applications. The proven market standard for micro-fl w valves.
• High-precision controlling, even in restricted spaces, thanks to compact design SPECIFICATIONS

• Greater process control guaranteed by precise, reproduceable Cv trims down to
Sizes: NPS ¼
6.3x10-5, measured and calibrated individually
Press: PN 400; Class 2500
• Application flexibility made possible by a wide range of bo y materials, including
Temp: -40°C to 700°C (40°F to 1292°F)
steel and high alloys
• High- and low-temperature capabilities with various bonnet options Refer to literature KMENTB8020
• High-pressure connections or weld ends available on request at flowse ve.com/library.
Kämmer
LINEAR GLOBE/ANGLE
SmallFlow 385000
A ½-in or 1-in version of the proven Kämmer low- and micro-fl w valve technologies, suitable for most
low-fl w applications.
• Greater process control guaranteed by precise, reproduceable Cv trims down to SPECIFICATIONS

6.3x10-5 and up to 4.7, measured and calibrated individually
• Longer service life from hydroformed bellows with up to three walls
• Suitable for liquid nitrogen services down to -196°C (-321°F) with cryogenic
Temp: -196°C to 700°C
extension option
(-321°F to 1292°F)
Kämmer • Compliance with fugitive emissions requirements up to PN 250 provided by
bellows seal option Refer to literature KMENBR5000

LINEAR GLOBE/ANGLE
CleanFlow 191000
Automatic sanitary control valves for batch sequencing and production-scale bioprocessing in food and beverage,
biotech, pharmacy and other applications requiring sterile valves.
• Compliance with cleaning in place (CIP), sanitizing in place (SIP) and other SPECIFICATIONS
standards assured by optimized body design with no pits, cracks or pockets Sizes: DN 15 to 100; NPS ½ to 4
• Hygienic and aseptic performance enabled by modular design Press: PN 16 to 25; Class 150
• Superior process control and longer service life in hygienic, food and beverage Temp: -40°C to 150°C
applications made possible by PTFE stem guide and self-lubricating bearings (-40°F to 302°F)
• Pharmaceutical, biotechnology and ultra-clean capabilities, with or without test
Kämmer ports for leak detection, available with aseptic configur tions
L I N E A R TA N K B O T T O M
DrainFlow 051000
A highly flexible tank flush valve design pable of being adapted to any vessel, with numerous trim and
customization options. Also available as a control valve.
• Broad application versatility made possible by a diverse range of configur tions SPECIFICATIONS
and special designs, including bellows seal option, normalizing fins pocket-free
body, steam jacketing or retracting plug
• Ease of maintenance from compact, lightweight design that allows in-line access
Temp: -40°C to 200°C (-40°F to 392°F)
under the tank
• High-temperature capability above 200°C (392°F) with flexible gr phite body Refer to literature KMEEBR5120
gasket and packing option at flowse ve.com/library.
Kämmer
flowserve.com 177
Mark 100
with Stealth trim
178

VALVES | SEVERE SERVICE CONTROL
SEVERE SERVICE CONTROL
Longer service life and lower maintenance costs are made possible through precision-
engineered valve and trim options — even in corrosive, erosive and high-velocity
applications. A range of advanced anti-erosion, noise reduction and anti-cavitation
selections neutralizes the detrimental wear and tear that too often reduce valve life or lead
to failures. Maximum flexibility is achieved through severe service products that incorporate
a range of material, pressure and temperature options.
Severe Service Control Valves – Quick Reference

DN 25 to 600 PN 20 to 420 -10°C to 400°C

Survivor™ Anti-Erosion
DN 25 to 200 PN 63 to 400 -10°C to 400°C

Multi-Z Cavitation Elimination
Severe Service Control Trim – Quick Reference*

Product Sub-Type Base Valve Sizes Kv (Cv) Range
DN 25 to 900 4 to 8737
MegaStream™ Noise Reduction Valtek Mark Series
NPS 1 to 36 (5 to 10 100)
DN 80 to 900 to 3547
Stealth™ Noise Reduction Valtek Mark Series
NPS 3 to 36 (4100)
TMCBV N2 DN 80 to 1400 117 to 77 850

Noise Reduction Valbart TMCBV
and D1 NPS 3 to 56 (135 to 90 000)
Setball, Duball DL DN 40 to 500 4 to 65 000

Z-Trim™ Noise Reduction
and Trunnball DL NPS 1½ to 20 (5 to 75 000)
DN 25 to 600 1.3 to 865

CavControl™ Cavitation Control Valtek Mark Series
NPS 1 to 24 (1.5 to 1000)
flowserve.com 179
Severe Service Control Trim – Quick Reference, cont’d.
DN 100 to 1400 4 to 65 000

TMCBV C2 and C1 Cavitation Control Valbart TMCBV
NPS 4 to 56 (5 to 75 000)
DN 40 to 900 5 to 623
ChannelStream™ Cavitation Elimination Valtek Mark Series
NPS 1½ to 36 (6 to 720)
DN 40 to 400 2 to 1773
DiamondBack™ Cavitation Elimination Valtek Mark Series
NPS 1½ to 16 (3 to 2050)
DN 15 to 100 0.078 to 8.425

SideWinder™ Cavitation Elimination Valtek Mark Series
NPS ½ to 4 (0.09 to 9.74)

ANTI-EROSION
Survivor
Reliable solutions designed for use in the harshest conditions — erosion, corrosion, slurry, high-velocity, and even
flashing pplications.
• High-fl w capacity ensured by sweep angle design that minimizes particle SPECIFICATIONS
erosion damage on the body Sizes: DN 25 to 600; NPS 1 to 24
• Reduced maintenance and longer service life enabled by oversized gallery that Press: PN 20 to 420; Class 150 to 2500
decreases fluid velocit , minimizing erosion damage Temp: -10°C to 400°C (14°F to 752°F)
• Reliable, long-lasting performance made possible with optional ceramic trim
materials, providing the highest level of erosion resistance, even in flashing sonic Refer to literature VLENTB0036
velocity fl w with abrasive solids at flowse ve.com/library.
Valtek • Application-specific efficie y assured by custom-engineering
C AV I TAT I O N E L I M I N AT I O N
Multi-Z
The Multi-Z valve delivers durable multistage cavitation elimination and precision control, even in applications where
entrained solids are a problem.
• Particulate tolerant design accommodates very high-pressure drops, eliminating SPECIFICATIONS

cavitation through multistage pressure drop Sizes: DN 25 to 200; NPS 1 to 8
• High rangeability and tight control with precision-machined plugs Press: PN 63 to 400; Class 300 to 2500
• Tight leakage protection with a shielded seat protected from high fluid velocities Temp: -10°C to 400°C (14°F to 752°F)
while closing and opening
Refer to literature VLENTB1631
Valtek at flowse ve.com/library.
Explore Flowserve VirtualPlant

Quickly find the pumps valves, seals and actuation best suited
for your plant with Flowserve VirtualPlant. 3D models of various
plant types within the oil and gas, chemical, power, water and
general industries make it easy for you to see which Flowserve
products are used in key units and applications. Quick
access to product literature, videos and user instructions
helps you to select the ideal products for your specific
application requirements. Begin exploring now at
https://virtualplant.flowse ve.com
flowserve.com 181
NOISE REDUCTION
MegaStream
MegaStream reduces control valve noise and vibration in a wide range of gas applications through staging, frequency
shifting, attenuation and velocity control.
• Improved personnel safety due to noise attenuation up to 30 dBa SPECIFICATIONS

• Longer valve and system life enabled by reducing downstream noise and vibration Base Valve: Valtek Mark Series
• Cost-effective, reliable and long-lasting performance derived from heavy-duty, Sizes: DN 25 to 900; NPS 1 to 36
nested cylinder design Kv (Cv) Range: 4 to 8737 (5 to 10 100)
• Low installation costs enabled by interchangeability with standard Mark Series Flow Direction: Under the plug
seat retainers Pressure Stages: 1 to 7
Valtek
Refer to literature FCENBR0067
NOISE REDUCTION
Stealth
Stealth combines new advances in noise control with proven technologies to create the most effective device capable
of eliminating noise in the most demanding services.
• Improved personnel safety due to significant noise reduction — by as much SPECIFICATIONS

as 40 dBa — resulting from the combined effect of six noise-, velocity- and Base Valve: Valtek Mark Series
pressure-control mechanisms Sizes: DN 80 to 900; NPS 3 to 36
• Longer valve and system life enabled by reducing downstream noise and vibration Kv (Cv) Range: to 3547 (4100)
• Increased valve capacity due to optimized fl w path, which reduces exit turbulence Flow Direction: Under the plug
• Cost-competitive solution made possible by stacked disc construction Pressure Stages: 6 to 20
Valtek
NOISE REDUCTION
TMCBV N2 and D1
These economical trim options offer cavitation- and noise-control options based on proven Flowserve
MegaStream technology.
• Broad application flexibility enabled by TMCBV system, offering a wide range of SPECIFICATIONS
exclusive trims for gas applications Base Valve: Valbart TMCBV
• High rangeability allows one valve to handle a range of operating parameters Sizes: DN 100 to 1400; NPS 4 to 56
• Lower total cost of ownership made possible by smaller, lighter valves requiring Kv (Cv) Range: 117 to 77 850
less expensive actuators and pipe supports (135 to 90 000)
• Greater personnel safety from noise attenuation up to 20 dBA Pressure Stages: 1 to 4
Valbart
Refer to VLENBR0067 or VBENTB0068

NOISE REDUCTION
Z-Trim
Z-Trim combines the benefits of an advanced control valve with the simplicity of a ball valve Most effective with low
to medium pressure drops, the Z-Trim excels at eliminating noise in high fl w services.
• Innovative ball trim design provides effective noise attenuation where pressure SPECIFICATIONS
drops are high, and still delivers the high capacity expected from a ball valve Base Valve: Setball, Duball DL
• Improved personnel safety due to noise attenuation up to 17 dBa and Trunnball DL
• Increased reliability and reduced maintenance in applications with entrained Sizes: DN 40 to 500; NPS 1.5 to 20
media owing to self-cleaning design Cv Range: 58 to 25 537
• Installation and retrofit costs are kept l w, as only one part must be changed
NAF Flow Direction: Bidirectional
Pressure Stages: 1 to 5
C AV I TAT I O N C O N T R O L
CavControl
A cost-effective trim that minimizes cavitation damage to valve components with a special seat retainer that controls
the location and concentrates vapor bubble implosion away from metal parts.
• Lower maintenance costs plus improved reliability, performance and service life SPECIFICATIONS
due to innovative design that controls damage by isolating cavitation away from Base Valve: Valtek Mark Series
metal components Sizes: DN 25 to 600; NPS 1 to 24
• Low cost of ownership and simplified maintenance made possible by high degree Kv (Cv) Range: 1.3 to 865 (1.5 to 1000)
of parts interchangeability with other valve models Flow Direction: Over the plug
• Broad application versatility enabled by characterization option
Valtek Pressure Stages: 1
C AV I TAT I O N C O N T R O L
TMCBV C2 and C1
These cost-saving trim options provide effective cavitation control based on proven Flowserve
CavControl technology.
• Extended valve life and reduced wear due to engineered design that directs SPECIFICATIONS
cavitation away from critical surfaces Base Valve: Valbart TMCBV
• Broad application flexibility enabled by TMCBV system that offers a wide range of Sizes: DN 100 to 1400; NPS 4 to 56
exclusive trims for liquid applications Kv (Cv) Range: 4 to 65 000
• Lower total cost of ownership made possible by smaller, lighter valves requiring (5 to 75 000)
less expensive actuators and pipe supports
Valtek Pressure Stages: 1
• Improved personnel safety resulting from a reduction in hydrodynamic noise by as
much as 15 dBA Refer to VLENBR0067 or VBENTB0068
flowserve.com 183
ChannelStream
ChannelStream trim prevents cavitation from forming and minimizes hydrodynamic noise in the most severe liquid
applications.
• Reduced maintenance and extended service life assured by cavitation-eliminating SPECIFICATIONS

design, even in the most difficult pplications Base Valve: Valtek Mark Series
• Increased efficien y from staged pressure drops Sizes: DN 40 to 900; NPS 1½ to 36
• Low cost of ownership made possible by high degree of parts interchangeability Kv (Cv) Range: 5 to 623 (6 to 720)
with conventional Mark One valves Flow Direction: Over the plug
• Broad application flexibility vailable with characterization option Pressure Stages: 2 to 6
Valtek
DiamondBack
The most technologically advanced anti-cavitation design in the industry, the Valtek DiamondBack uses staged
pressure drops to eliminate cavitation, even in the most demanding services.
• Reduced maintenance and long service life assured by cavitation-eliminating SPECIFICATIONS

design, which minimizes damage, even in the most difficult pplications Base Valve: Valtek Mark Series
• Low cost of ownership and extended service life from erosion-minimizing design Sizes: DN 40 to 400; NPS 1½ to 16
• Even greater service life with optional tungsten carbide trim that also minimizes Kv (Cv) Range: 2 to 1773 (3 to 2050)
damage from erosion Flow Direction: Over the plug
• Quick and easy maintenance enabled by easy-to-clean stacked disc design Pressure Stages: 3 to 6
Valtek
SideWinder
SideWinder is a unique solution that delivers durable multi-stage cavitation elimination and precision control in high
pressure drop, small fl w applications.
• Reduced maintenance and extended service life assured by cavitation-eliminating SPECIFICATIONS

design, even in the most difficult pplications Base Valve: Valtek Mark Series
• Capable of eliminating cavitation in high pressure drop, small fl w applications Sizes: DN 15 to 100; NPS ½ to 4
• Capable of tolerating small particulate Kv (Cv) Range: 0.078 to 8.425
• Axial fl w design with low clearance fl w for precise control at low openings (0.09 to 9.74)
Flow Direction: Over the plug
Valtek Pressure Stages: 5 to 18
Refer to literature FCENBR0068 at
fl wserve.com/library.

185
flowserve.com
Equiwedge
MSIV/MFIV
186

VALVES | GATE
GATE
Reliable, tight shutoff and low-pressure drop operation characterize the Flowserve range
of gate valves. Flexible wedge, split wedge, slab gate and double-disk configurations cover
a range of requirements to meet any user need, from general service to severe conditions
with gross thermal transients or dual-phase fluids. Plant personnel are kept safe through
the application of fast-acting valves manufactured to ASME B16.34, ASME Section III
and RCC-M design codes.
Gate – Quick Reference

Equiwedge™ DN 100 to 1050 PN 110 to 420 -29°C to 566°C

Flexible Split Wedge
MSIV/MFIV NPS 4 to 42 Class 600 to 2500 (-20°F to 1050°F)
DN 65 to 900 PN 110 to 610 -29°C to 650°C

Equiwedge Flexible Split Wedge
DN 65 to 600 PN 20 to 260 -29°C to 566°C

Flex Wedge Flexible Wedge
DN 15 to 600 PN 20 to 325 -29°C to 566°C

Double Disk Parallel Slide
DN 15 to 50 PN 20 to 140 -29°C to 566°C

Split Wedge Split Wedge
DN 50 to 1600 PN 20 to 420 -100°C to 400°C

Slab Gate Slab
flowserve.com 187
GATE
FLEXIBLE SPLIT WEDGE
Equiwedge MSIV/MFIV
Compliant with ASME Section III and RCC-M design codes, this valve is the industry standard for fast-acting, reliable
isolation of main steam or feedwater lines.
• Plant and personnel safety assured by verifiable gas/hydraulic actu tor design, which SPECIFICATIONS
can close the valve within 3–5 seconds of receipt of signal Sizes: DN 100 to 1050; NPS 4 to 42
• Maximized actuator readiness made possible by self-contained energy storage and Press: PN 110 to 420;
critical component redundancies Class 600 to 2500
• Extended service life enabled by simplified modular design with no external hose or Temp: -29°C to 566°C
piping connections and a 12-year maintenance cycle (-20°F to 1050°F)
• Environmental and functional qualific tions per IEEE and ASME QME-1 requirements
Edward® Refer to literature EVENCT0004
FLEXIBLE SPLIT WEDGE
Equiwedge
A large-bore gate valve with body-guided split wedges, offering superior leak tightness and performance.
• Maximized MTBF and lower total cost of ownership derived from optimized SPECIFICATIONS
component flexibility th t reduces component stress from thermal binding Sizes: DN 65 to 900; NPS 2½ to 36
• Minimized valve leakage enabled by disk guidance and optimized gate design, Press: PN 110 to 610;
ensuring tight seating Class 600 to 3600
• Longer component life with cast and forged offerings incorporating the latest in hard- Temp: -29°C to 650°C
facing welding processes (-20°F to 1200°F)
Edward Refer to literature EVENBR1005
FLEXIBLE WEDGE
Flex Wedge
Flexible wedge gate valve with a single-piece optimized gate designed to minimize seat leakage.
• Broad versatility of nuclear applications enabled by a wide range of sizes and SPECIFICATIONS
pressure classes Sizes: DN 65 to 600; NPS 2½ to 24
• Additional versatility ensured by compatibility with most actuation methods, including Press: PN 20 to 260; Class 150 to 1500
handwheel/bevel gear, electric, pneumatic and hydraulic Temp: -29°C to 566°C
• Reliable operation under extreme plant scenarios ensured by seismic qualific tions (-20°F to 1050°F)
Refer to literature EVENCT0004

Anchor/Darling® at flowse ve.com/library.

VALVES | GATE
PARALLEL SLIDE
Double Disk
Providing tight shutoff under the most severe conditions, this exclusive disk and wedge design resists effects of
extreme temperature, gross thermal transients, high and low differential pressures, and dual-phase fluids
• Improved personnel safety made possible by bonnet design, which allows easy SPECIFICATIONS
access to valve internals while minimizing radiation exposure Sizes: DN 15 to 600; NPS ½ to 24
• Reliable closing, smooth operation and long service life enabled by design that Press: PN 20 to 325; Class 150 to 1888
minimizes accumulation of sediment and sludge Temp: -29°C to 566°C
• Lower maintenance time and costs thanks to simple part design, parts (-20°F to 1050°F)
interchangeability and in-line maintenance capability
Anchor/Darling at flowse ve.com/library.
SPLIT WEDGE
Split Wedge
Compact gate valve design with body-guided, two-piece gates provides reliable operation and sealing.
• Reliable sealing assured by brazed-in seat SPECIFICATIONS

• Economical performance from rugged design that smoothes fl w transitions to Sizes: DN 15 to 50; NPS ½ to 2
minimize fl w turbulence Press: PN 20 to 140; Class 150 to 800
• Longer service life from stronger, oversized stem and graphite packing, providing Temp: -29°C to 566°C
stronger disc-to-stem connection and less wear (-20°F to 1050°F)
• Reduces cost and maintenance with ADVanseal pressure sealing system, which
eliminates leakage Refer to literature EVENCT0004
SLAB
Slab Gate
Cost-competitive, high-performance general service control valve designed for applications demanding higher
rangeability, precise control and higher fl w capacity.
• Economical performance with the highest rated Cv (up to 70% more than SPECIFICATIONS
competitors), which sometimes allows for smaller sizes to be used Sizes: DN 25 to 300; NPS 1 to 12
• Longer service life and more precise control enabled by the robust polygon Press: PN 10 to 63; Class 150 to 600
shaft/plug connection Temp: -100°C to 400°C
• Low maintenance costs due to double-offset eccentric plug design that reduces (-148°F to 750°F)
seat wear while providing reliable Class IV (metal seat) and VI (soft seat) shutoff
• Improved safety with superior shaft blow-out protection from the ASME B16.34 Refer to literature VLENBR0064
Valbart at flowse ve.com/library.
shaft design
flowserve.com 189
Univalve
190

VALVES | GLOBE
GLOBE
Maintaining a safe plant environment and extending service life — that’s what’s engineered
into every Flowserve globe valve. Whether it’s fail-safe response in nuclear plants or reliable
performance in high-temperature/pressure boiler plant services, every Flowserve globe
valve incorporates special features to maximize performance. Optimized flow passages and
smooth transitions reduce pressure drop and destructive turbulence.
Globe – Quick Reference*

Flite-Flow® Main DN 600 to 850 PN 110 to 260 -29°C to 565°C

Y-Pattern
Steam Isolation NPS 24 to 34 Class 600 to 900 (-20°F to 1050°F)
DN 65 to 800 PN 50 to 760 -29°C to 650°C

Flite-Flow Y-Pattern
DN 15 to 100 PN 290, 460 and 760 -29°C to 816°C

Univalve® Y-Pattern
NPS ½ to 4 Class 1690, 2680 and 4500 (-20°F to 1500°F)
Edward DN 8 to 50 PN 130 and 260 -29°C to 565°C

Y-Pattern
Bolted Bonnet NPS ¼ to 2 Class 800 and 1500 (-20°F to 1050°F)
DN 25 to 65 PN 50 to 420 -29°C to 565°C

Edward Blow-off Y-Pattern
NPS 1 to 2½ Class 300 to 2500 (-20°F to 1050°F)
DN 15 to 50 PN 20 to 325 -29°C to 371°C

1878 Y-Pattern Y-Pattern
Anchor/Darling DN 15 to 600 PN 20 to 260 -29°C to 565°C

Y-Pattern
Y-Pattern NPS ½ to 24 Class 150 to 1500 (-20°F to 1050°F)
flowserve.com 191
Globe – Quick Reference, cont’d.
Edward DN 15 to 50 PN 110 and 260 -29°C to 538°C

T-Pattern
Bolted Bonnet NPS ½ to 2 Class 600 and 1500 (-20°F to 1000°F)
DN 15 to 50 PN 20 to 325 -29°C to 371°C

1878 T-Pattern T-Pattern
Anchor/Darling DN 65 to 60 25 to 260 -29°C to 565°C

T-Pattern
T-Pattern NPI 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)

VALVES | GLOBE
Y- PAT T E R N
Flite-Flow Main Steam Isolation

High-performance, service-proven technology designed for use when Y-pattern globe valves are chosen for
nuclear applications.
• Standards compliance achieved via construction per ASME Section III design code SPECIFICATIONS
• Plant and personnel safety assured by single-stored energy system, redundant Sizes: DN 600 to 850; NPS 24 to 34
control systems and verifiable 2–10-second fail-safe response, regardless of Press: PN 110 to 260; Class 600 to 900
main steam system conditions or loss of electrical power Temp: -29°C to 565°C
• Increased reliability with functional verific tion prior to plant startup or (-20°F to 1050°F)
during outages
Edward • High efficien y due to optimized fl w path plus integrated actuator
• Environmental and functional qualific tions per IEEE requirements at flowse ve.com/library.
Y- PAT T E R N
Flite-Flow
Reliable, stop and stop-check valve designed to provide maximum fl w capacity and minimum leakage in
high-pressure, high-temperature applications.
• Increased uptime via engineered design with optimized fl w passages to SPECIFICATIONS

minimize fl w direction changes and reduce pressure drop Sizes: DN 65 to 800; NPS 2½ to 32
• High performance achieved by rigid body design to minimize body distortions and Press: PN 50 to 760; Class 300 to 4500
reduce leakage Temp: -29°C to 650°C
• Minimized leakage through precise disc alignment between disc and seat (-20°F to 1200°F)
• Longer service life from detached design that minimizes body stress for increased
Edward Refer to literature EVENCT0002
body and hard-facing lifetime
Y- PAT T E R N
Univalve
High-performance globe valve designed for maximum fl w capacity and minimum leakage in high-pressure,
high-temperature applications.
• Increased uptime via engineered design with optimized fl w passages to SPECIFICATIONS

minimize fl w direction changes and reduce pressure drop Sizes: DN 15 to 100; NPS ½ to 4
• High performance achieved by rigid body design to minimize distortions and Press: PN 290, 460 and 760;
reduce leakage Class 1690, 2680 and 4500
• Minimized leakage between seat and disc through machined construction of body Temp: -29°C to 816°C
bore and hard-faced seat in a single operation to ensure tight seating (-20°F to 1500°F)
Edward • Longer service life from design that eliminates side thrust issues and prevents
misalignment, galling and stem bending Refer to literature EVENCT0001
flowserve.com 193
GLOBE
Y- PAT T E R N
Edward Bolted Bonnet

Durable, high-performance small bore globe valve with a bolted-bonnet design for improved maintenance.
• Increased uptime from construction material hardness with a low coefficient of friction SPECIFICATIONS
that results in reduced torque, minimal stem wear and elimination of galling Sizes: DN 8 to 50; NPS ¼ to 2
• Lower maintenance costs due to bolted bonnet, four-bolt design Press: PN 130 and 260
• Longer service life from integral hardened seat and secondary stem which provide Class 800 and 1500
positive shutoff, extended seat life and leak protection Temp: -29°C to 565°C
• Improved plant and personnel safety through rugged, knobbed hand wheel that (-20°F to 1050°F)
provides sure grip, even when wearing gloves
Edward
Y- PAT T E R N
Edward Blow-off
High-performance, blow-off valve designed for applications requiring intermittent operation to remove accumulated
sediment from equipment and piping, or rapidly lower the boiler water level.
• Standards compliance assured by design that meets ASME boiler code criteria in a SPECIFICATIONS
wide variety of applications Sizes: DN 25 to 65; NPS 1 to 2½
• Increased reliability via forged steel construction that withstands the rigors of Press: PN 50 to 420; Class 300 to 2500
intermittent use Temp: -29°C to 565°C
• High-pressure, high-temperature performance assured through design, construction (-20°F to 1050°F)
Edward material graduations through increasing class sizes
Y- PAT T E R N
1878 Y-Pattern
Versatile, reliable Y-pattern globe valve designed with ideal size and weight parameters to deliver maximum utility when
new or replacement Class 150 to 1878 valves are required.
• Lower operating costs and high inventory flexibility due to vers tility of one valve SPECIFICATIONS
designed to operate in three pressure classes Sizes: DN 15 to 50; NPS ½ to 2
• Standards compliance assured by design that meets ASME Section III, Class 1, 2 and 3 Press: PN 20 to 325; Class 150 to 1878
design codes Temp: -29°C to 371°C (-20°F to 700°F)
• Increased durability via a one-piece, low-profile investment cast body/yoke assembly
that results in smooth fl w passages Refer to literature ADENBR0002
Anchor/Darling • Reduced maintenance with T-head stem design that enables easy changing of disc
• Functional qualific tions per pressure Class 1878 (intermediate) requirements

VALVES | GLOBE
Y- PAT T E R N
Anchor/Darling Y-Pattern
High-performance, investment cast globe valve designed to minimize destructive turbulence in a variety of demanding
throttling applications.
• Increased uptime via large radius curves in body design to ensure smooth SPECIFICATIONS
transitions and eliminate abrupt changes in fluid directio Sizes: DN 15 to 600; NPS ½ to 24
• Lower maintenance costs enabled by no-weld design and rapid change kit Press PN 20 to 260; Class 150 to 1500
• Broad application versatility provided by Y, angle and Y-angle pattern valve options Temp: -29°C to 565°C
and wide range of pressure configur tions (-20°F to 1050°F)
Anchor/Darling Refer to literature EVENCT0004
When and Where You Need Us

Flowserve customers never have to look far for support. Our network of
manufacturing facilities, design centers of excellence, strategically
located Quick Response Centers and on-site customer resources
ensures you’ll receive timely responses to your critical
repair needs, engineering challenges, routine maintenance
support and product upgrade requirements. In addition, our
commitment to localization drives employment and training,
creating a skilled workforce near our customers’ locations.
T- PAT T E R N

High-performance, small-bore stop valve designed with four-bolt, bolted-bonnet design for reliability and reduced
maintenance; angle pattern models are also available.
• Increased uptime from construction material hardness with a low coefficient o SPECIFICATIONS
friction that results in reduced torque, minimal stem wear and elimination of galling Sizes: DN 15 to 50; NPS ½ to 2
• Longer service life from integral hardened seat and secondary stem, which Press: PN 110 and 260;
provide positive shutoff, extended seat life and leak protection Class 600 and 1500
• Improved plant and personnel safety through rugged, knobbed hand-wheel that Temp: -29°C to 538°C
Edward provides sure grip, even when wearing gloves (-20°F to 1000°F)
• High-fl w performance enabled by optimized fl w passages that minimize fl w
direction changes and reduce pressure drops Refer to literature EVENCT0001
flowserve.com 195
GLOBE
T- PAT T E R N
1878 T-Pattern
Rugged, one-piece, low-profile globe valve constructed with precision cast bo y/yoke assembly using the latest
investment casting techniques.
• Reduced maintenance with lower, non-rotating stem with T-head design that SPECIFICATIONS
facilitates disc removal and replacement Sizes: DN 15 to 50; NPS ½ to 2
• Standards compliance assured by design that meets ASME Section III, Class 1, 2 and Press: PN 20 to 325; Class 150 to 1878
3 design codes Temp: -29°C to 371°C (-20°F to 700°F)
• Increased durability via a one-piece, low-profile investment-cast body/yoke assembly
that results in smooth fl w passages Refer to literature EVENCT0004
• Application versatility provided by three disc styles: quick-open plug, parabolic and
cage type
T- PAT T E R N
Anchor/Darling T-Pattern
High-performance, cast-stop valve designed to minimize destructive turbulence in a variety of demanding
throttling applications.
• Increased uptime via large radius curves in body design to ensure smooth transitions SPECIFICATIONS
and eliminate abrupt changes in fluid directio Sizes: DN 65 to 600; NPS 2½ to 24
• Broad application versatility in high-temperature, high-pressure applications enabled Press: PN 20 to 260; Class 150 to 1500
by wide range of pressure and size options Temp: -29°C to 565°C
• Longer service life from body and plug designed to minimize cavitation (-20°F to 1050°F)
• Available with functional qualific tions per pressure Classes 150 through 1500 for
Anchor/Darling Refer to literature EVENCT0004
nuclear service

VALVES | GLOBE
flowserve.com 197
Edward Tilting Disk
198

VALVES | CHECK
CHECK
Leak-free, tight sealing, protection against reverse flow and minimal flow direction changes
are at the core of Flowserve check valve designs. A broad range of configurations that
includes piston, tilting disc, spring-loaded disc and dual-plate models meets the critical,
high-temperature/pressure demands of the world’s major industries. Customers can carefully
match application requirements through myriad valve body, seat and disc options.
Check – Quick Reference*

DN 65 to 800 PN 50 to 760 -29°C to 650°C

Flite-Flow Piston (Lift)
DN 15 to 100 PN 290, 460 and 760 -29°C to 816°C

Univalve Piston (Lift)
NPS ½ to 4 Class 1690, 2680 and 4500 (-20°F to 1500°F)
Edward DN 15 to 50 PN 110 to 260 -29°C to 538°C

Piston (Lift)
Bolted Bonnet NPS ½ to 2 Class 600 and 1500 (-20°F to 1000°F)
PN 110, 150, 260 and 325

1878 DN 15 to 50 38°C to 371°C
Piston (Lift) Class 600, 900, 1500
Piston Check NPS ½ to 2
and 1878
(100°F to 700°F)

Piston (Lift)
Piston (Lift) Check NPI 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)
PN 110, 150, 260 and 325

1878 DN 15 to 50 -29°C to 371°C
Swing Class 600, 900, 1500 and
Swing Check NPS ½ to 2
1878
(-20°F to 700°F)

Swing
Swing Check NPI 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)
flowserve.com 199
Check – Quick Reference, cont’d.
Edward DN 65 to 600 PN 110 to 760 -29°C to 650°C

Tilting Disk
Tilting Disk NPS 2½ to 24 Class 600 to 4500 (-20°F to 1200°F)

Tilting Disk
Tilting Disk NPS 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)
DN 40 to 1000 PN 20 to 40 -30°C to 350°C

NAF Check Tilting Disk

VALVES | CHECK
PISTON (LIFT)
Flite-Flow
Rugged, large bore, cast body, piston check valve designed to operate in critical high-pressure and high-temperature
environments.
• Increased uptime and longer service life due to integral Stellite seating surfaces SPECIFICATIONS
• Improved reliability and service integrity via body-guided disc design to ensure Sizes: DN 65 to 800; NPS 2½ to 32
tight sealing and check valve protection in the event of fluid back flow Press: PN 50 to 760; Class 300 to 4500
• Superior fl w performance enabled by streamlined fl w shapes that reduce Temp: -29°C to 650°C
pressure drops and support full lift (-20°F to 1200°F)
Edward • Broad application versatility in high-temperature, high-pressure applications
enabled by wide range of pressure and size options
PISTON (LIFT)
Univalve
Reliable piston check valve designed for high-temperature and high-pressure uses in a variety of environments.
• Increased uptime from the use of anti-thrust rings in the body-guided disc, which SPECIFICATIONS
eliminates misalignment and galling Sizes: DN 15 to 100; NPS ½ to 4
• Greater process control due to integral hard-surfaced seat, which allows positive Press: PN 290, 460 and 760;
shutoff and seat life Class 1690, 2680 and 4500
• Enhanced service integrity through optimum fl w shape that minimizes fl w Temp: -29°C to 816°C
direction changes and pressure drops
Edward (-20°F to 1500°F)
• Lower operating costs enabled by a die-formed, flexible gr phite gasket seated to
a prescribed bonnet torque that provides a reliable seal Refer to literature EVENCT0004
PISTON (LIFT)

Durable, small bore check valve, forged and equipped with a bolted cover design to enable easy maintenance.
• Increased uptime from the use of anti-thrust rings in the body-guided disc, which SPECIFICATIONS
eliminates misalignment and galling Sizes: DN 15 to 50; NPS ½ to 2
• Greater process control due to integral hard-surfaced seat, which allows positive Press: PN 110 and 260;
shutoff and extends seat life Class 600 and 1500
• Lower maintenance costs due to bolted bonnet, four-bolt design Temp: -29°C to 538°C
• Longer service life from positive metal-to-metal stop design that prevents over- (-20°F to 1000°F)
compression of the gasket
Edward • Optimized fl w passages minimize fl w direction changes and reduce pressure
drops
flowserve.com 201
CHECK
PISTON (LIFT)
1878 Piston Check

High-performance 1878 piston check valve designed for low leakage rate testing (LLRT) and available with EPR/EPDM
resilient seated discs.
• Lower operating and inventory costs due to versatility of one valve designed to SPECIFICATIONS
operate in three pressure classes Sizes: DN 15 to 50; NPS ½ to 2
• Standards compliance assured by design that meets ASME Section III, Class 1, 2 and Press: PN 110, 150, 260 and 325;
3 design codes Class 600, 900, 1500 and 1878
• Improved reliability and service integrity from investment cast body construction that Temp: -29°C to 371°C (-20°F to 700°F)
results in contoured, smooth fl w path and high Cv
Anchor/Darling • Improved reliability enabled by lightweight disc and non-cobalt seat ring Refer to literature EVENCT0004 at
• Functional qualific tions per pressure class 1878 (intermediate) requirements fl wserve.com/library.
PISTON (LIFT)
Anchor/Darling Piston (Lift) Check

Versatile lift check valves designed for low or pulsating fl w applications where pressure drop through the valve is
not critical.
• Broad application flexibility provided by the variety of vailable body types SPECIFICATIONS
• High performance ensured by cast body with large radius curves designed to optimize Sizes: DN 65 to 600; NPI 2½ to 24
internal fl w passages and minimize pressure drops Press: PN 20 to 260; Class 150 to 1500
• Improved reliability and service integrity via body-guided disc design to ensure tight Temp: -29°C to 565°C
sealing and check valve protection in the event of fluid back flow (-20°F to 1050°F)
Anchor/Darling • Rapid operation made possible by equalizer lines that connect the bonnet area above
the disc to the downstream port to improve disc lift and eliminate dash-pot effect Refer to literature EVENCT0004
Quality Defined by ou
Flowserve quality systems are designed to align with the customer
definition of qualit . We apply process-based, data-centric
methods to every level of our supply chain to ensure reliable
quality and timely fulfillment of order requirements We call
this our Results-driven Initiative on Safety and Quality (RISQ),
and it comprises more than 3200 employees worldwide,
each committed to providing the quality products and
services your operations demand.

VALVES | CHECK
SWING
1878 Swing Check

Rugged, specialized swing check valve optimally designed for use in reactor penetration and isolation applications.
• Rapid disassembly/reassembly during maintenance and repair that minimizes SPECIFICATIONS

exposure to radiation Sizes: DN 15 to 50; NPS ½ to 2
• Environmental/regulatory compliance and improved plant safety due to ALARA- Press: PN 110, 150, 260 and 325;
compliant design Class 600, 900, 1500 and 1878
• Functional qualific tions per ratings in accordance with ASME Section III, Class 1 Temp: -29°C to 371°C (-20°F to 700°F)
pressure class 1878 (intermediate) requirements
• Greater process control through available dual-seat disc design for leak-free Refer to literature EVENCT0004
sealing at both high- and low-pressure differentials
SWING
Anchor/Darling Swing Check Valve

All-purpose swing check valve provides economical reverse-fl w protection for piping system applications where fl w
is relatively constant.
• Broad application and installation versatility via option to install in horizontal or SPECIFICATIONS
vertical lines (with fl w up) Sizes: DN 65 to 600; NPI 2½ to 24
• Low initial cost and low ongoing costs due to ease of maintenance Press: PN 20 to 260; Class 150 to 1500
• Functional qualific tions per ratings in accordance with ASME Section III Temp: -29°C to 565°C
• Greater process control through available dual-seat disc design for leak-free (-20°F to 1050°F)
sealing at both high- and low-pressure differentials
Anchor/Darling • Reliable performance enabled by design that ensures tight sealing Refer to literature EVENCT0004
T I LT I N G D I S K
Edward Tilting Disk

Designed to close as quickly as possible, this large-bore valve minimizes loud, damaging slamming and vibration
noises caused by high-velocity reverse fl w in high-pressure and high-temperature applications.
• Greater process control assured by precision-machined cover and integral SPECIFICATIONS

hard-surfaced seats Sizes: DN 65 to 600; NPS 2½ to 24
• Fast shutoff response facilitated by counterweighted dome-shaped disk, Press: PN 110 to 760;
low-friction pivots and enclosed torsion springs Class 600 to 4500
• Long, reliable service in high pressures and temperatures due to preloaded
Edward Temp: -29°C to 650°C
pressure-energized flexible gr phite composite (-20°F to 1200°F)
• Easy installation and alignment made possible by adjustable hinge pin
flowserve.com 203
CHECK
Anchor/Darling Tilting Disk

Designed for applications requiring assured operability and controlled closure, the Anchor/Darling Tilting Disk check valve
also maintains the disc open in the best position to minimize pressure drop.
• High-efficien y performance from differential seat angles, ensuring better seal with SPECIFICATIONS
low seating force, plus hydrofoil profile for extra stabilit Sizes: DN 65 to 600; NPS 2½ to 24
• Longer service life enabled by valve design, which causes disc stops to impact body Press: PN 20 to 260; Class 150 to 1500
away from sealing surfaces Temp: -29°C to 565°C
Anchor/Darling • Reduced downtime via easily replaceable seal-welded seat rings that minimize (-20°F to 1050°F)
distortion from body stress
NAF Check
A cost-effective compact tilting disc check valve. Unique design gives excellent tightness and minimizes
water-hammering.
• Low total cost of ownership provided by compact face-to-face dimension — SPECIFICATIONS

invaluable where space is limited Sizes: DN 40 to 1000; NPS 1½ to 24
• Reduced handling costs and easier installation thanks to low weight Press: PN 20 to 40; Class 150 to 300
• Reliability and regulatory compliance assured by tightness that exceeds API 598 Temp: -30°C to 350°C (-22°F to 662°F)
standards
• Longer service life with optional spring, which reduces risk of damage from water- Refer to literature Fk 30.70 and
NAF hammer effect in liquid media Fk 30.71 at flowse ve.com/library.

VALVES | CHECK
flowserve.com 205
Durco G4
206

VALVES | PLUG
PLUG
The range of plug valve applications is broad, and the Flowserve portfolio reliably addresses
the vast majority of requirements. High temperatures and pressures. Corrosive or dirty
media. Lethal, toxic and sub-zero fluids. Our family of plug valves delivers low energy
consumption through low-torque designs and safe operation with tight shutoff performance.
High levels of uptime are achieved through pressure-balanced designs. Absolute shutoff
requirements can be addressed by double-isolation models or non-lubricated designs,

depending on application.
Plug – Quick Reference*

DN 25 to 200 PN 10, 16, 25, 40 and 100 -46°C to 274°C

Mach 1™ Non-Lubricated
NPS 1 to 8 Class 150, 300 and 600 (-50°F to 525°F)
DN 15 to 450 PN 10, 16, 25 and 40 -46°C to 288°C

G4 Non-Lubricated
NPS ½ to 20 Class 150 and 300 (-50°F to 550°F)
DN 15 to 450 PN 10, 16, 25 and 40 -46°C to 288°C

G4BZ-HF Non-Lubricated
NPS ½ to 20 Class 150 and 300 (-50°F to 550°F)
Multiport Series NPS ½ to 12 PN 20 to 420; Class 150 to to 450°C

Lubricated
— Steel and Iron DN 15 to 300 2500; 150 to 400 CWP (iron) (232°F)
Super Nordstrom® NPS ½ to 4 -29°C to 177°C

Lubricated Class 150 to 600
— Steel DN 15 to 100 (-20°F to 350°F)
Bolted Gland NPS 6 to 36 -29°C to 177°C

Lubricated 120 to 500 CWP
— Iron DN 150 to 900 (-20°F to 350°F)
Bolted Gland NPS 6 to 12 -29°C to 177°C

Lubricated Class 150
— Steel DN 150 to 300 (-20°F to 350°F)
Dynamic Balance® NPS 4 to 20 -29°C to 177°C

— Iron DN 100 to 500 (-20°F to 350°F)
flowserve.com 207
Plug – Quick Reference, cont’d.
Dynamic NPS 1 to 30 -46°C to 816°C

Balance — Steel DN 25 to 750 (-50°F to 1500°F)
Super Nordstrom
NPS ½ to 5 -29°C to 93°C
Two-Bolt Cover — Lubricated
DN 15 to 125
200 CWP
(-20°F to 200°F)
Iron
Super Nordstrom
NPS ¾ to 4 13.7 bar -29°C to 93°C
Two-Bolt Cover — Lubricated
DN 20 to 100 (200 psi) (-20°F to 200°F)
Steel
PN 20 to 420
DIPV — DN 15 to 600 -46 to 375°C
Double-Isolation NPS ½ to 24
API 2000 to 10 000
(-51 to 700°F)
Double-Isolation DN 50 to 300 -46°C to 232°C

— Steel NPS 2 to 12 (-50°F to 450°F)
Screwed Gland DN 15 to 100 -29°C to 178°C

Type — Iron NPS ½ to 4 (-20°F to 353°F)
DN 15 to 300 to PN 50 -20°C to 250°C

Taper Plug Lubricated
NPS ½ to 12 to Class 300 (-5°F to 480°F)
PN 20 to 420
DN 15 to 300 -46°C to 375°C
Super-H Lubricated
NPS ½ to 36
Class 150 to 2500
(-51°F to 700°F)
API 2000 to 10 000
PN 20 to 420
TIPV — DN 15 to 600 -46°C to 375°C
Twin Isolation NPS ½ to 24
API 2000 to 10 000
(-51°F to 700°F)
DN 15 to 300 PN 16 -29°C to 204°C

T4E Lined

VALVES | PLUG
N O N - L U B R I C AT E D
Mach 1
All-purpose, non-lubricated Sleeveline plug valve designed to provide reliable service with consistent, lower torques
for cost-effective actuation.
• Dependable, tight shutoff and in-line seal adjustment from tapered plug design SPECIFICATIONS
• Reduced actuation costs from lower constant turning torques owing to unique Sizes: DN 25 to 200; NPS 1 to 8
plug and sleeve design Press: PN 10, 16, 25, 40 and 100;
• Lower maintenance costs with in-line seat replacement Class 150, 300 and 600
• High-temperature and high-pressure capabilities to 274°C (525°F) and Class Temp: -46°C to 274°C (-50°F to 525°F)
600 (derated)
• Ease of operation enabled by ISO 5211 mounting pad with universal flange and Refer to literature DVATB0030
Durco double-D plug stem that accepts most standard actuation at flowse ve.com/library.
G4
Reliable, versatile Sleeveline plug valve designed for the most corrosive and difficult chemical se vices where
drop-tight shutoff is an absolute requirement.
• Dependable, tight shutoff and in-line seal adjustment from tapered plug design SPECIFICATIONS
• Lower maintenance costs due to design that utilizes two adjuster fasteners that Sizes: DN 15 to 450; NPS ½ to 20
permit in-line seal adjustments under pressure within seconds Press: PN 10, 16, 25 and 40;
• Low fugitive emissions through fluoropolymer reverse-lip di phragm that provides Class 150 and 300
a pressure-activated, self-energizing dynamic and static stem seal Temp: -46°C to 288°C (50°F to 550°F)
• Compatibility with a range of Automax™ actuators and other instrumentation
Refer to literature DVENBR0024
Durco • Options for lethal, toxic and sub-zero fluid se vices plus process control and high
fl w requirements at flowse ve.com/library.
G4BZ-HF
Reliable, HF alkylation plug value preferred at refineries throughout the world when drop-tight shutoff is an
absolute requirement.
• Corrosion-resistant Monel M35-1 and API 607 fire-sealed construction ideal for SPECIFICATIONS
refine y applications that include HF and H2SO4 alkylation Sizes: DN 15 to 450; NPS ½ to 20
• Dependable, tight shutoff and in-line seal adjustment from tapered plug design Press: PN 10, 16, 25 and 40;
• Low fugitive emissions through fluoropolymer reverse-lip di phragm that provides Class 150 and 300
a pressure-activated, self-energizing dynamic and static stem seal Temp: -46°C to 288°C (-50°F to 550°F)
• Ease of operation enabled by compatibility with a wide range of Automax
actuators and other instrumentation Refer to literature DVENTB0025
flowserve.com 209
PLUG
L U B R I C AT E D
Multiport Series – Steel and Iron

Dynamic Balance (steel), Super Nordstrom (steel) and Nordstrom Iron multiport plug valves are extremely efficient and
designed for applications that ordinarily require two to four straightway valves.
• Low inventory carrying costs and convenient operations as a result of the simplified SPECIFICATIONS
piping that eliminates the need for other fitting Sizes: NPS ½ to 12; DN 15 to 300
• Broad application use via the ports and stops that can be arranged to fit required Press: PN 20 to 420; Class 150 to 2500;
operating conditions 150 to 400 CWP (iron)
• Greater process control by eliminating waste, overpressure on equipment or incorrect Temp: to 450°C (232°F)
mixtures due to the convenient design
Refer to literature NVABR0014
Nordstrom • Efficient oper tion facilitated by the sealant grooves, which provide consistent
lubrication while protecting against corrosion at flowse ve.com/library.
L U B R I C AT E D
Super Nordstrom – Steel

Well-tested, economical line of super-steel plug valves that provides dependable operations and eliminates the need for
field readjustments
• Greater process control provided by the bubble-tight shutoff and predictable torque SPECIFICATIONS
• Increased uptime provided by the precisely controlled vertical lifting of the plug, which Sizes: NPS ½ to 4, DN 15 to 100
eliminates its wedging without affecting tight shutoff Press: Class 150 to 600
• Durable performance via the specially shaped weather seal that protects the stem, Temp: -29°C to 177°C (-20°F to 350°F)
gland and packing from hostile environments and corrosion
• Reliable operation enabled by the Sealdport™ sealant grooving system, designed to Refer to literature NVENBR1004
Nordstrom give complete distribution of pressurized sealant to seating surfaces
L U B R I C AT E D
Bolted Gland – Iron

Reliable bolted gland iron valve for applications in high-stress environments, such as gas, HVACI, wastewater, oil, steam
and more.
• Reduced downtime as a result of sealant channels that provide lubrication and protect SPECIFICATIONS
the seating surface against corrosion, erosion or accumulation of solids Sizes: NPS 6 to 36; DN 150 to 900
• Greater process control provided by leak-free, easy turning performance of the gland, Press: 120 to 500 CWP
which flexe Temp: -29°C to 177°C
• High-pressure performance made possible by the heavy-wall body, which can (-20°F to 350°F)
withstand higher-than-line sealant pressure and expected line stresses
Nordstrom • Reliable operation enabled by the Sealdport sealant grooving system, designed to give Refer to literature NVENBR1003
complete distribution of pressurized sealant to seating surfaces at flowse ve.com/library.

VALVES | PLUG
L U B R I C AT E D
Bolted Gland – Steel

Reliable bolted gland steel valve for applications in high-stress environments, such as gas, HVACI, wastewater, oil,
steam and more.
• Reduced downtime provided by fixed-adjustment gland which allows for quick SPECIFICATIONS
field adjustments if necessa y Sizes: NPS 6 to 12; DN 150 to 300
• Personnel safety and ease of maintenance resulting from double ball checks, Press: Class 150
which maintain pressure in the enclosed grooving system and prevent back Temp: -29°C to 177°C (-20°F to 350°F)
pressure on the sealant chamber
• Greater process control provided by leak-free, flexible metal sealing di phragm Refer to literature NVENBR1004
Nordstrom • Reliable operation enabled by the Sealdport sealant grooving system, designed to
give complete distribution of pressurized sealant to seating surfaces
L U B R I C AT E D
Dynamic Balance – Iron

Dependable and durable iron plug valve that eliminates the problems often associated with conventional plug valves.
• Increased uptime due to pressure-balanced plug, which ensures predictable SPECIFICATIONS

torque, even under high differential, vibration and thermal cycling Sizes: NPS 4 to 20; DN 100 to 500
• Greater process control enabled by the stainless steel spring, which preloads to Press: 150 to 200 CWP
prevent vibration and thermal cycling Temp: -29°C to 177°C (-20°F to 350°F)
• Reduced maintenance derived from the equal pressure above and below the plug
and port created by the balanced holes on both ends Refer to literature NVENBR1003
• Reliable operation enabled by the Sealdport sealant grooving system, designed to at flowse ve.com/library.
Nordstrom give complete distribution of pressurized sealant to seating surfaces
L U B R I C AT E D
Dynamic Balance – Steel

Dependable and durable steel plug valve that eliminates the problems often associated with conventional plug valves.
• Increased uptime due to pressure-balanced plug, which ensures predictable SPECIFICATIONS

torque, even under high differential, vibration and thermal cycling Sizes: NPS 1 to 30; DN 25 to 750
• Reliable performance in hostile environments provided by the anti-friction coating Press: Class 150 to 2500
weather seal that provides superior corrosion resistance Temp: -46°C to 816°C
• Reduced downtime with pressure-energized stem seals (-50°F to 1500°F)
• Broadest range of sizes, pressure classes and materials
• Reliable operation enabled by the Sealdport sealant grooving system, designed to Refer to literature NVENBR1004
Nordstrom at flowse ve.com/library.
give complete distribution of pressurized sealant to seating surfaces
flowserve.com 211
PLUG
L U B R I C AT E D
Super Nordstrom Two-Bolt Cover – Iron

Economical two-bolt cover iron valve designed to withstand the harsh gas industry environment and provide
corrosion protection.
• Cost-effective design that eliminates external leakage without the use of costly SPECIFICATIONS
accessories to protect exposed threaded stems Sizes: NPS ½ to 5; DN 15 to 125
• Ease of operations and maintenance through the use of valves that can be operated Press: 200 CWP
with standard 2-inch square wrench and adapter Temp: -29°C to 93°C (-20°F to 200°F)
• Increased uptime enabled by the thermally bonded, low-friction plug coating that
creates low operating torque Refer to literature NVENBR1003
• Greater process control through the sealant jacking that ensures positive operation and at flowse ve.com/library.
Nordstrom drop-tight closure
L U B R I C AT E D
Super Nordstrom Two-Bolt Cover – Steel

Highly reliable, two-bolt cover steel valve providing all the well-known Nordstrom features for the gas industry in a design
that can be welded in-line.
• Ease of installation provided by weld ends that permit installation directly into welded SPECIFICATIONS
gas-distribution lines Sizes: NPS ¾ to 4; DN 20 to 100
• Improved resistance to fracture from ground movement provided by the increased Press: 13.7 bar (200 psi)
strength and ductility compared to flanged iron valve Temp: -29°C to 93°C (-20°F to 200°F)
• Highly reliable operation provided by the coated, tapered iron plug, which has
exceptionally low coefficient of friction and separ tes the metal plug and body Refer to literature NVENBR1004
• Longer service life due to the corrosion protection provided by the weather seal and
internal stops, which eliminate the trash pocket between the cover and stem
L U B R I C AT E D
DIPV – Double-Isolation
Reliable, double-isolation plug valve with two independent obturators in a single body; ideal for double block and
bleed applications.
• Improved plant and personnel safety assured by double-isolation design that allows SPECIFICATIONS
the operator to verify valve isolation before carrying out maintenance Sizes: DN 15 to 600; NPS ½ to 24
• A cost-, space- and weight-saving alternative to a double block and bleed system Press: PN 20 to 420; Class 150 to 2500;
using two valves in series API 2000 to 10 000
• Installation ease from compact design with the same face-to-face dimension as a Temp: -46°C to 375°C (-51°F to 700°F)
single valve, often replacing it without the need for pipe work modific tions
• Greater process control via pressure-balanced design that provides true bubble-tight, Refer to literature SRENTB0001
Serck Audco double- isolation capability within a single valve body at flowse ve.com/library.

VALVES | PLUG
L U B R I C AT E D
Double-Isolation – Steel
High-performance, double-isolation steel plug valve designed for critical shutoff applications where absolute shutoff is
required for safety, environmental or process reasons.
• Broad application versatility due to robust design, making valve well-suited for SPECIFICATIONS
isolation in compressor, pump, meter, water or gas injection system applications Sizes: DN 50 to 300; NPS 2 to 12
• Improved plant and personnel safety assured by double-isolation design Press: Class 150 to 2500
• Installation ease from compact design with the same face-to-face dimension as a Temp: -46°C to 232°C (-50°F to 450°F)
single valve
Refer to literature NVENBR1016
Nordstrom • Greater process control via proven Dynamic Balance pressure-balanced and
sealing technology to prevent unequal pressure above/below the plug at flowse ve.com/library.
• Low lifecycle costs compared to two single valves
L U B R I C AT E D
Screwed Gland Type – Iron

Rugged, dependable, quarter-turn plug valve designed to require no adjustments in the field once the plug has been
carefully adjusted by valve assembler.
• Increased uptime via controlled plug motion design provided by the flexing of SPECIFICATIONS
spring washers Sizes: DN 15 to 100; NPS ½ to 4
• Greater process control enabled by tapered plug that is lapped individually with its Press: 200 to 800 CWP
matching body, providing perfect seating contact Temp: -29°C to 178°C (-20°F to 353°F)
• Longer service life assured by positive rotary action and sealant channels that
protect the seating surfaces Refer to literature NVENBR1003
• Positive operation and drop-tight closure ensured by sealant jacking and thermally
bonded, low-friction plug coating for low operating torque
L U B R I C AT E D
Taper Plug
Reliable, standard type taper plug valve designed for general isolation purposes in a variety of liquid, gaseous and
slurry services. Available in cast iron and steel to suit application.
• Greater process control via tapered plug design that offers leak tightness while SPECIFICATIONS
maintaining smooth valve operation Sizes: DN 15 to 300; NPS ½ to 12
• Longer service life through tapered seat surfaces of the plug and body that Press: to PN 50; to Class 300
prevent exposure to line fluid when valve is in the open positio Temp: -20°C to 250°C (-5°F to 480°F)
• Increased reliability due to the straight fl w path design that minimizes pressure
loss by allowing very little resistance to fl w Refer to SRENTB0002 and SRENTB0003
Serck Audco
flowserve.com 213
PLUG
L U B R I C AT E D
Super-H
Rugged, pressure-balanced plug valve designed for demanding oil and gas isolation applications where bubble-tight
shutoff and reliable operation are critically important.
• High reliability and certainty of zero-leakage sealing down the line achieved by large, SPECIFICATIONS
metal-to-metal seat mating areas and precise seat mating procedures Sizes: DN 15 to 1050; NPS ½ to 42
• Increased uptime from pressure-balanced plug design that utilizes pressure to balance Press: PN 20 to 420; Class 150 to 2500;
the forces acting on the plug and prevent taper locking API 2000 to 10 000
• Lower maintenance costs via in-line maintainable design that allows sealant to be Temp: -46°C to 375°C
injected with the valve in any position and under pressure (-51°F to 700°F)
• Longer service life assured by seats that are protected against line media while the
Serck Audco valve is open Refer to literature SRENTB0004
L U B R I C AT E D
TIPV – Twin Isolation

Reliable, double-isolation plug valve with two independent obturators in a single body; ideal for double block and
bleed applications.
• Improved plant and personnel safety assured by double-isolation design that allows SPECIFICATIONS
the operator to verify valve isolation before carrying out maintenance Sizes: DN 15 to 600; NPS ½ to 24
• Cost-, space- and weight-saving alternative to double block and bleed system using Press: PN 20 to 420; Class 150 to 2500;
two valves in series; same face-to-face as a single valve in Class 600 and above API 2000 to 10 000
• Lower maintenance costs via in-line maintainable design that allows sealant to be Temp: -46°C to 375°C
Serck Audco injected with the valve in any position and under pressure (-51°F to 700°F)
• Greater process control via pressure-balanced design that provides true bubble-tight,
double-isolation capability within a single valve body Refer to literature SRENTB0005
Reduced Cost of Ownership

We get it. Reducing equipment total cost of ownership is critical to
improving your bottom line. Flowserve has helped more than 200
strategic alliance partners reduce their equipment ownership
costs through programs that address asset management and
optimization, engineering and technical services, education
and training, and aftermarket parts and services. In fact, one
customer with seven refineries is projected to s ve in excess
of $20 million over five years

VALVES | PLUG
LINED
T4E
Durco T4E valves provide maximum corrosion resistance while eliminating product contamination at a reasonable
cost. Available with pneumatic or electric actuators for on-off or modulating control applications.
• Cost-effective alternative to high-alloy body materials SPECIFICATIONS

• Reliable performance in extreme service conditions such as severe cycling, Sizes: DN 15 to 300; NPS ½ to 12
vacuum applications, and elevated temperatures ensured by T-slots and anchor Press: PN 16; Class 150 to 300
holes that provide strong attachment of lining to body and plug Temp: -29°C to 204°C (-20°F to 400°F)
• Efficient high-fl w capacity due to large ports, which reduce friction losses and
pressure drop Refer to literature DVENBR0066
Durco • Easy maintenance with in-line adjustment; no disassembly is required to
restore seating
flowserve.com 215
216

ACTUATION & INSTRUMENTATION
While pumps, seals and valves seem to Electric Actuation. . . . . . . . . 218
get most of the attention, it’s often the Gearboxes. . . . . . . . . . . . . . . . . . . . . . 226
Fluid Power Actuation . . . . . . . 230

actuators and positioning solutions that are
Positioners. . . . . . . . . . . . . . . . . . . . . . 242
running the show. Fail-safe isolation. On-
Switch Boxes. . . . . . . . . . . . . . . . . . . . 250
off modulation. Precision process control.
Software . . . . . . . . . . . . 254
These are the must-haves of fluid motion
and control, no matter how difficult or
remote the application.
Our actuator and positioning products are

equal parts durability and sophistication,
an ideal balance that delivers reliable valve
control in tough, hazardous environments.
From small-footprint, compact electric
actuators to high-torque, high-speed, fluid
powered products, every solution is built
to withstand its environment and deliver
industry-leading service life. Embedded
technologies make them easy to use and
set up. More importantly, operators can
readily identify and expedite solutions to
process and equipment issues through
advanced prognostics, diagnostics and
communications protocols.
flowserve.com 217
MX
218

ACTUATION & INSTRUMENTATION | ELECTRIC
ELECTRIC
Delivering unmatched positioning accuracy for control and modulating functions, Flowserve
electric actuators are the world’s first choice for some of the most challenging applications.
Compact, lightweight designs keep footprints small. Cost-effective capital investment is
matched by reduced costs for operation, control functions, maintenance, environmental
compliance and safety. Superior process monitoring, data logging and information feedback
options maximize efficiency and minimize downtime.
Electric – Quick Reference*

Product Sub-Type Torque Thrust Output Speed Temperatures
Intrusive 136 to 81 600 Nm 4500 to 225 000 kN 750 to -50°C to 65°C

L120 Multi-Turn (100 to 60 000 ft-lb) (10 000 to 500 000 lbf) 3000 rpm (-56°F to 150°F)
Intrusive 20 to 81 349 Nm 36 to 2224 kN 1800 to -20°F to 150°F

SMB Multi-Turn (15 to 60 000 ft-lb) (8000 to 500 000 lbf) 3600 rpm (-29°C to 66°C)
Intrusive 353 to 11 253 Nm 62 to 1112 kN 1800 to -20°F to 150°F

SB and SBD Multi-Turn (260 to 8300 ft-lb) (14 000 to 250 000 lbf) 3600 rpm (-29°C to 66°C)
Non-Intrusive, 54 to 2033 Nm -55°C to 70°C

QX Quarter-Turn (40 to 1500 ft-lb)
— 5 to 120 s
(-67°F to 156°F)
Non-Intrusive, 24 to 337 Nm 3 to 40 kN 3 to -30°C to 70°C

QXM Multi-Turn (18 to 250 ft-lb) (593 to 9065 lbf) 24 rpm (-22°F to 156°F)
Non-Intrusive, 27 to 2307 Nm 35 to 333 kN 15 to -60°C to 70°C

MX Multi-Turn (20 to 1700 ft-lb) (8000 to 75 000 lbf) 200 rpm (-76°F to 158°F)
flowserve.com 219
Electric – Quick Reference, cont’d.
Product Sub-Type Topology Comm. Meth. Max. Tran. Max. Devc. Max. Dist.
Multi-drop (single
Network 1200 m
Modbus DDC Controls
ended/redundant Master-Slave 19.2 Kbps 250
(without repeaters)
loop for MX)
Redundant Modbus
Modbus Ethernet Network 1.52 km (without
bi-directional loop protocol over 38.4 Kbps 250
TCP/IP Controls
or daisy chain RS-485 or Ethernet
repeaters)
240/network —
Foundation Fieldbus Network Multi-drop, Point- Publisher/
31.25 Kbps 32/segment 1900 m/segment
H1 with DTM Controls to-Point, Tree Subscriber
(with repeater)
Multi-drop,
PROFIBUS DP V1 with Network 1200 m
Point-to-Point Master-Slave 1.5 Mbps 127
Redundancy and DTM Controls
Daisy Chain
(without repeaters)
Network Multi-drop, 127 1200 m

PROFIBUS PA Controls Point-to-Point, Tree
Master-Slave 31.25 Kbps
(31 per repeater) (without repeaters)
Network Multi-drop, Linear

DeviceNet Controls Trunkline/Dropline
Master-Slave 500 Kbps 64 500 m
Hart Network Multi-drop,

Master-Slave 1.2 Kbps 15 1800 m/network
with DTM Controls Point-to-Point
All network PCBs meet EMC requirements to European Directive 2004/108/EC and vibration/seismic
requirements to Machinery Directive 2006/42/EC.

VALVES | LINEAR
ACTUATION
I N T R U S I V E M U LT I - T U R N
L120
& INSTRUMENTATION
From commercial power feedwater and steam systems, to oil and gas refining and coking to water filtr tion and
treatment, the L120 has a solid record in the most demanding applications.
• Proven safety with explosion-proof certific tion, torque overload protection, plus SPECIFICATIONS
CONTROL
resistance to lightning, EMI, fire vibration and high-pressure steam Torque: 136 to 81 600 Nm
• Longer service life from aluminum and ductile iron housings, plus anti-friction (100 to 60 000 ft-lb)
bearing-supported alloy steel worm shafts with bronze worm gears Thrust: 4500 to 225 000 kN
• Broad application flexibility via integr tion with most network protocols through (10 000 to 500 000 lbf)
UEX electronic controls package Output Speed: 750 to 3000 rpm
Limitorque ® • Extreme environment performance available from weatherproof, submersible and Temp: -50°C to 65°C (-56°F to 150°F)
explosion-proof construction options
Refer to literature LMENBR1200
| ELECTRIC
SMB
Introduced in the 1960s, SMB actuators are used by the U.S. Navy, every nuclear power facility in the U.S., and
virtually every other industrial environment.
• Long service life with rugged with cast iron housing and precision-machined SPECIFICATIONS
gearing Torque: 20 to 81 349 Nm
• Extreme environment performance enabled by nuclear, weatherproof, submersible (15 to 60 000 ft-lb)
or explosion-proof construction Thrust: 36 to 2224 kN
• Lower maintenance and downtime owing to torque-limiting feature, which (8000 to 500 000 lbf)
Limitorque de-energizes the motor to prevent valve damage in the event of an obstruction Output Speed: 1800 to 3600 rpm
• Fully qualified for nu lear applications to IEEE 384, 323 and 344 Temp: -29°C to 66°C (-20°F to 150°F)
SB and SBD
These spring-compensated extensions of the SMB product line are available for applications where thermal expansion
may pose a jammed-valve risk, or where valve discs are subject to extremely high-speed closure.
• High-temperature capability enabled by design that allows for thermal expansion SPECIFICATIONS
and contraction of the valve stem and actuator stem nut Torque: 353 to 11 253 Nm
• High-speed performance made possible by spring-loaded stem nut, which (260 to 8300 ft-lb)
absorbs the seating shock caused by rapid closing Thrust: 62 to 1112 kN
• Longer service life via impact-dampening capability, which enables actuators to (14 000 to 250 000 lbf)
Limitorque function at speeds as high as three times normal rates Output Speed: 1800 to 3600 rpm
• Optimized performance for stem contraction and torque back-seating applications Temp: -29°C to 66°C (-20°F to 150°F)
available with double-compensating SBD configur tion
flowserve.com 221
ELECTRIC
NON-INTRUSIVE, QUARTER-TURN
QX
The QX design builds on more than 20 years of proven MX technology to provide all the user-preferred features in a
quarter-turn smart actuator package.
• Greater process control with non-contacting absolute encoders that provide accurate SPECIFICATIONS
position sensing Torque: 54 to 2033 Nm
• B.I.S.T., built-in self-test which never needs batteries to retain position data, even in (40 to 1500 ft-lb)
the event of main power loss Output Speed: 5 to 120 s
• Extreme environment performance made possible by non-intrusive design, 100% Temp: -55°C to 70°C (-67°F to 156°F)
Limitorque solid-state controls, and reliable digital communication control system
• Flexible control configur tions, setup and diagnostics in 11 languages, and advanced Refer to literature LMENBR3302
brushless DC motor that supports most global voltages, AC or DC at flowse ve.com/library.
N O N - I N T R U S I V E , M U LT I - T U R N
QXM
A smart, non-intrusive electronic valve actuator with a maximum of 20 drive sleeve turns. Designed for limited, short
stroke, light torque rising stem valve applications such as choke or control valves.
• Lower operating costs compared to pneumatic actuators, with the added advantages SPECIFICATIONS
of electrical operation Torque: 24 to 337 Nm; (18 to 250 ft-lb)
• Greater process control from accuracy that meets and exceeds EN 15714 (Class D) Thrust: 3 to 40 kN; (593 to 9065 lbf)
and IEC 60034 standards for modulating service Output Speed: 3 to 24 rpm
• Increased reliability via electro-magnetic noise protection of analog process control Temp: -30°C to 70°C (-22°F to 156°F)
Limitorque signals
N O N - I N T R U S I V E , M U LT I - T U R N
MX
Introduced in 1997 and into its third generation, the MX is built upon a wealth of experience and performance in valve
actuation. Thousands are installed in all major market segments.
• Broad versatility owing to a wide variety of configur tions, including torque-only, SPECIFICATIONS
thrust-based, linear thrust base and rising stem applications Torque: 27 to 2307 Nm (20 to
• Increased uptime from patented absolute positioning encoder that never needs 1700 ft-lb)
batteries and B.I.S.T. built-in self-test Thrust: 35 to 333 kN;
• Instant actuator status and valve position in 11 languages provided by graphical (8000 to 75 000 lbf)
display with local control switches with solid-state Hall effect devices Output Speed: 15 to 200 rpm
Limitorque • Low-temperature capability to -60°C (-76°F) with arctic temperature and solid-state Temp: -60°C to 70°C (-76°F to 158°F)
starter options for modulation to 1200 starts per hour

VALVES
ACTUATION
| LINEAR &CONTROL
Leading the Charge in Electric Innovation
Flowserve was one of the first companies to introduce electric
INSTRUMENTATION | ELECTRIC
actuators back in the 1980s. Since then, we’ve significantly
increased their efficien y while dramatically reducing their
cost. In recent years, these advances have reached a tipping
point that makes electric actuators the first choice for a wide
variety of applications. Today’s electric actuators can provide
superior positioning accuracy for control or modulating
functions, plus invaluable diagnostic and process data.
NETWORK CONTROLS
Modbus DDC
Limitorque ensures complete integration with Modbus DDC. Connect up to 250 actuators with a single twisted-pair
cable on an RS-485 network to a PLC/SCADA system or Limitorque Master Station.
®
• Greater process control in even the largest networks made possible by support for SPECIFICATIONS
up to 250 actuators Topology: Multi-drop (single ended/
• Increased efficien y, security and safety via Master Station option, enabling redundant loop for MX)
complete single-source control and diagnostics for MX, QX, L120 and LY units Comm. Meth: Master-Slave
• Complies with EMC requirements to European Directive 2004/108/EC and Max. Trans. Rate: 19.2 Kbps
vibration/seismic requirements to Machinery Directive 2006/42/EC Max. Devices: 250
Max. Dist: 1200 m (without repeaters)
Refer to LMENIM2329 and
LMENFL5100 at flowse ve.com/library.
NETWORK CONTROLS
Modbus Ethernet TCP/IP

Combining the simplicity of the Modbus protocol with the widespread Ethernet standard, Limitorque products with
Modbus Ethernet TCP/IP connect to any Modbus network that supports TCP/IP and RS485 systems.
®
• Greater process control enabled by support for up to 250 devices SPECIFICATIONS

• Increased flexibility and reduced costs via off-the-shelf Ethernet tools permitting Topology: Redundant bi-directional
control from a DCS, PLC or PC loop or daisy chain
• Easy installation with simple module that connects directly to Modbus terminals Comm. Meth: Modbus protocol over
• Optimized communication performance supported by baud rate options from 1.2K RS-485 or Ethernet
up to 38.4K Max. Trans. Rate: 38.4 Kbps
• Complies with ODVA CIP specific tions for internet protocols, Industrial Ethernet Max. Devices: 250
(IE) regulations IEC 61158 (Fieldbus) and IEEE 802 Max. Dist: 1.52 km (without repeaters)
Refer to literature LLMENIM2329 at
flowse ve.com/library.
flowserve.com 223
ELECTRIC
NETWORK CONTROLS
Foundation Fieldbus H1 with DTM

Limitorque actuators with Foundation Fieldbus can act as a link active scheduler and time master for regulating
communication on a fieldbus segment
• Broad network versatility from support for multiple topologies, including point-to- SPECIFICATIONS
point, bus with spurs, daisy chain, tree or combinations of these Topology: Multi-drop, Tree,
• Ease of installation and setup with direct connection to PLC or DCS systems from Point-to-Point
major manufacturers, including Emerson, Honeywell, ABB, GE and Yokogawa Comm. Meth: Publisher/Subscriber
• Increased performance, safety and environmental compliance from Flowserve Max. Trans. Rate: 31.25 Kbps
ValveSightTM support Max. Devices: 240/network;
• Complies with EMC requirements to European Directive 2004/108/EC and 32/segment (with repeater)
vibration/seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 1900 m/segment
Refer to literature LMENIM2330
NETWORK CONTROLS
PROFIBUS DP V1 with Redundancy and DTM

Limitorque actuators with PROFIBUS DP are designed to operate sensors and actuators via a centralized controller in
production (factory) automation applications.
• Reduced maintenance and related operating costs via intuitive software that SPECIFICATIONS
proactively identifies maintenance needs preventing unscheduled shutdowns Topology: Multi-drop, Point-to-Point,
• Increased efficien y enabled by network that allows users to communicate in real Daisy Chain
time with every device and monitor diagnostics information, including alarms Comm. Meth: Master-Slave
• Complies with EMC requirements to European Directive 2004/108/EC Max. Trans. Rate: 1.5 Mbps
• Complies with Profibus specifi tion, Slave-Redundancy_2.212_v12 and transfers Max. Devices: 127
communication for both flying and system redundan y in ≤ 500 ms per specific tion Max. Dist: 1200 m (without repeaters)
• Supports NAMUR NE-107
Refer to LMENIM2339 and
LMENFL2336 at flowse ve.com/library.
NETWORK CONTROLS
PROFIBUS PA
Limitorque actuators with PROFIBUS PA are used to monitor and control process automation applications.
• Broad application flexibility via analog and digital input/output function block SPECIFICATIONS
• Ease of installation and setup made possible by direct connection to PLC or DCS Topology: Multi-drop, Tree,
systems from major manufacturers, including Emerson, Honeywell, ABB and Yokogawa Point-to-Point
• Increased performance, safety and environmental compliance from Flowserve Comm. Meth: Master-Slave
ValveSight support Max. Trans. Rate: 31.25 Kbps
• Complies with EMC requirements to European Directive 2004/108/EC and vibration/ Max. Devices: 127 (31 per repeater)
seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 1200 m (without repeaters)

VALVES | LINEAR
ACTUATION
NETWORK CONTROLS
DeviceNet
& INSTRUMENTATION
Limitorque actuators integrate seamlessly with DeviceNet. DeviceNet is a digital, multi-drop network that connects and
serves as a communication network between industrial controllers and field devices
• Broad application flexibility via support for multiple communic tion hierarchies and SPECIFICATIONS
CONTROL
message prioritization Topology: Multi-drop, Linear
• Greater reliability and reduced downtime assured by cyclic redundancy checking Trunkline/Dropline
(CRC), auto retries, and bus-powered network interface that allows alarm information Comm. Meth: Master-Slave
to be communicated when actuator loses main power Max. Trans. Rate: 500 Kbps
• Complies with EMC requirements to European Directive 2004/108/EC and vibration/ Max. Devices: 64
seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 500 m
NETWORK CONTROLS
| ELECTRIC
Hart with DTM
Limitorque actuators with HART (Highway Addressable Remote Transducer) allow secondary masters, such as
handheld communicators, to be connected without interfering with the plant control system.
• Greater process control, asset management efficien y and safety made possible SPECIFICATIONS
by enabling the use of both centralized control/monitoring and smart field device Topology: Multi-drop, Point-to-Point
• Faster diagnostic feedback and summaries due to burst mode that enables Comm. Meth: Master-Slave
response of up to three commands continuously Max. Trans. Rate: 1.2 Kbps
• Complies with EMC requirements to European Directive 2004/108/EC and Max. Devices: 15
vibration/seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 1800 m/Network
Refer to LMENFL2340 or LMENIM2340
flowserve.com 225
V Series Bevel
226

ACTUATION & INSTRUMENTATION | GEARBOXES
GEARBOXES
Whether for manual or motorized operation, Flowserve quarter- and multi-turn gearboxes
stand up to the toughest performance requirements and environmental challenges. Trouble-
free operation, high uptime and rugged dependability are engineered into every unit
through high-strength gearing, robust housings and roller bearing-supported shafts. Broad
application versatility is achieved via weatherproof and submersible constructions and a
wide range of output speeds and torques.
Gearboxes – Quick Reference

Product Sub-Type Torque to Thrust to Temperatures
V 52 000 Nm 7650 kN -35°C to 90°C

Multi-Turn
Series Bevel (38 350 ft-lb) (1.7 million lbf) (-31°F to 194°F)
SR 23 000 N 3500 kN -35°C to 90°C

Multi-Turn
Series Spur (16 984 ft-lb) (787 000 lbf) (-31°F to 194°F)
WG 442 000 Nm -35°C to 90°C

Quarter-Turn —
Series Worm (326 000 ft-lb) (-31°F to 194°F)
HBC 126 204 Nm -29°C to 66°C

Quarter-Turn —
Series Worm (93 000 ft-lb) (-20°F to 150°F)
flowserve.com 227
GEARBOXES
M U LT I - T U R N
V Series Bevel
V Series bevel gearboxes are designed for manual and motorized operation for industrial gate and globe valves as well as
slide gates.
• Broad application versatility provided by excellent sealing of mating surfaces, which SPECIFICATIONS
allows for weatherproof or temporary submersion applications Torque to: 52 000 Nm (38 350 ft-lb)
• Increased uptime facilitated by roller bearing-supported shaft and high-strength bevel Thrust to: 7650 kN (1.7 million lbf)
gearing, which are rated for extremely high thrust and torque requirements Temp: -35°C to 90°C (-31°F to 194°F)
• Longer service life via ductile iron housing and roller bearing-supported shafts and
drive sleeve that provide durability Refer to literature LMENFL3602
Limitorque at flowse ve.com/library.
M U LT I - T U R N
SR Series Spur
The SR Series is a solid-performing, multi-turn, spur gearbox designed for manual or motorized operation of gate and
globe valves as well as slide gates.
• Well suited for high vibration or tight space requirements owing to parallel input shaft SPECIFICATIONS
and output drive sleeve Torque to: 23 000 Nm (16 984 ft-lb)
• Application versatility provided by available weatherproof and submersible Thrust to: 3500 kN (787 000 lbf)
constructions as well as a wide range of output speeds and torques Temp: -35°C to 90°C (-31°F to 194°F)
• Increased uptime facilitated by roller bearing-supported shaft and high-strength
gearing, which are rated for extremely high thrust and torque requirements Refer to literature LMENIM3701
• High strength and durability provided by ductile iron housing and roller bearing-
supported shafts and drive sleeve
QUARTER-TURN
WG Series Worm
The WG Series of worm gearboxes offers unsurpassed quality and longevity in a wide variety of weatherproof, submersible
and buried-service applications.
• Extraordinary range of output speeds and torques made possible by compatibility with SPECIFICATIONS
a wide array of numerous electric actuators Torque to: 442 000 Nm (326 000 ft-lb)
• Reduced downtime provided by the removable, top-entry, splined valve shaft adapter, Temp: -35°C to 90°C (-31°F to 194°F)
which ensures proper engagement of the valve stem
• Increased uptime due to rugged ductile iron housing, roller bearing-supported shaft Refer to literature LMENFL2102
and well-designed sealing, which stands up to tough conditions at flowse ve.com/library.
Limitorque

ACTUATION & INSTRUMENTATION | GEARBOXES
QUARTER-TURN
HBC Series Worm

The HBC is the strongest worm gearbox on the market. It delivers consistent, trouble-free performance in demanding
applications, ranging from nuclear power plants to critical service fl w control in hydroelectric plants.
• Broad application versatility provided by ability to actuate a wide range of devices, SPECIFICATIONS
both manually or motorized, at a considerable range of output speeds and torques Torque to: 126 204 Nm (93 000 ft-lb)
• Increased uptime due to bronze worm gear paired with alloy steel worm shaft Temp: -29°C to 66°C (-20°F to 150°F)
• Lower maintenance costs due to heavy-duty construction; proven in use for more
than 50 years to be rugged and dependable Refer to literature LMENBR3500
• Ease of operation made possible by valve position pointer, which makes at-a- at flowse ve.com/library.
Limitorque glance position checking easier than ever
Smart Solutions for the World’s

Toughest Applications
No matter how extreme the environment or strict the regulations,
customers the world over trust Flowserve actuation and positioning
products to provide reliable, intelligent control. Whether your devices
need to endure polar ice or desert heat, provide fail-safe protection
in explosive atmospheres or nuclear power stations, or control
complicated modulating processes with pinpoint accuracy,
Flowserve has an actuation solution that’s right for your application.
flowserve.com 229
40R

ACTUATION & INSTRUMENTATION | FLUID POWER
FLUID POWER
Whether you need fail-safe action, high-torque power or high-speed functionality, Flowserve
fluid power actuators are built for the world’s toughest jobs. Reliable operation, reduced
maintenance and longer service life are made possible by the simplicity, efficiency and
flexibility built into every design. From nuclear power plants to offshore drilling platforms,
the world’s most critical infrastructures rely on Flowserve for rugged, efficient actuators with
service lifespans of a quarter-century or more.
Fluid Power – Quick Reference*

Product Sub-Type Torque Thrust MAWP Temperatures
Pneumatic — 550 kNm 12 barg -60°C to 160°C

LPS Scotch Yoke (405 659 ft-lb)
—
(174 psig) (-76°F to 320°F)
Pneumatic — 5500 Nm 12 barg -60°C to 160°C

LPC Scotch Yoke (4057 ft-lb)
—
(174 psig) (-76°F to 320°F)
RG, ARG Pneumatic — 248 kNm 10.3 barg -55°C to 149°C

—
and WRG Scotch Yoke (2.2M in-lb) (150 psig) (-67°F to 300°F)
-30°C to 80°C
Pneumatic — 60 to 20 000 Nm 8 barg
Turnex™ Linkage (44 to 1475 ft-lb)
—
(116 psig)
(-22°F to 176°F); to -40°C
(-40°F) on request
Pneumatic — 10 to 1700 Nm 8.3 barg -40°C to 150°C

LRP Scotch Yoke (88 to 15 046 in-lb)
—
(120 psig) (-40°F to 302°F)
Pneumatic — 7100 Nm 8.3 barg -40°C to 150°C

F39 Rack & Pinion (62 835 in-lb)
—
(120 psig) (-40°F to 302°F)

40R Rack & Pinion (62 835 in-lb)
—
(120 psig) (-40°F to 302°F)

33R Rack & Pinion (20 436 in-lb)
—
(80 psig) (-40°F to 302°F)
flowserve.com 231
Fluid Power – Quick Reference, cont’d.
Product Sub-Type Torque Thrust MAWP Temperatures

P61 Rack & Pinion (9408 in-lb)
—
(120 psig) (-40°F to 302°F)
Pneumatic — 5005 Nm 8 barg -50°C to 150°C

Supernova™ Rack & Pinion (44 294 in-lb)
—
(120 psig) (-55°F to 302°F)

SXL Rack & Pinion (6770 in-lb)
—
(120 psig) (-55°F to 302°F)
Pneumatic — 5 to 1285 Nm 6 barg -60°C to 70°C

NR Rotary (43 to 11 381 in-lb)
—
(80 psig) (-76°F to 158°F)
Pneumatic — 8 to 4160 Nm 10.3 barg -60°C to 177°C

VR Rotary (72 to 36 820 in-lb)
—
(150 psig) (-76°F to 350°F)
Pneumatic — 0.25 to 60 kN 6 barg -40°C to 80°C

FlowAct™ Linear
—
(56.2 to 13 488.5 lbf) (87 psig) (-40°F to 176°F)
Pneumatic — 15.85 to 262.53 kN 10.3 barg -40°C to 177°C

VL Linear
—
(3564 to 59 020 lbf) (150 psig) (-40°F to 350°F)

VL-C Linear
—
(3564 to 30 150 lbf) (150 psig) (-40°F to 350°F)

VL-ES Linear
—
(16 350 to 37 420 lbf) (150 psig) (-40°F to 350°F)

VL-UHC Linear
—
(3564 to 28 300 lbf) (150 psig) (-40°F to 176°F)
Series 2 Pneumatic — -40°C to 80°C

— to 35.0 kN (7868 lbf) 6 barg (87 psig)
Type KP Linear (-40°F to 176°F)
Series 4 Pneumatic — 1.4 to 4.2 barg -30°C to 80°C

— to 25.5 kN (5735 lbf)
Type KA Linear (20 to 60 psig) (-22°F to 176°F)
550 kNm 345 barg -60°C to 160°C

LHS and LHH Hydraulic
(405 659 ft-lb) (5000 psig) (-76°F to 320°F)
550 kNm 105 barg -40°C to 160°C

LDG Direct Gas
(405 659 ft-lb) (1500 psig) (-40°F to 320°F)

ACTUATION & INSTRUMENTATION | FLUID POWER
P N E U M AT I C — S C O T C H Y O K E
LPS
Ideal for medium or large valve actuation and any application requiring robust design, long service life and high-speed
operation. Meets the most stringent safety and performance standards for oil and gas applications.
• Low total cost of ownership provided by 25-year design life and maintenance SPECIFICATIONS
intervals up to six years Torque: 550 kNm (405 659 ft-lb)
• High-speed performance with reduced size, weight and consumption made MAWP: 12 barg (174 psig)
possible by highly efficient desig Temp: -60°C to 160°C (-76°F to 320°F)
• Modular construction allows easy on site maintenance without special tools and
Limitorque Refer to LFENBR0001 or LFENFL0001
without removal from the valve
• Regulatory compliance with the highest industry standards, including EN 15714 at flowse ve.com/library.
and IEC 61508 (SIL 3 capable)
LPC
Suitable for pneumatic on-off, light modulating and control applications of small or medium quarter-turn valves in
general and protective services. Also useable in safety services up to SIL 3 in accordance with IEC 61508.
• Low total cost of ownership provided by proven design with 25-year lifecycle and SPECIFICATIONS
maintenance intervals up to five years (or per EN 15714 endurance testing Torque: 5500 Nm (4057 ft-lb)
• Application versatility enabled by flexible field conversion from ail Close CW to MAWP: 12 barg (174 psig)
Fail Open CCW and easy retrofitting via specially designed coupling interfac Temp: -60°C to 160°C (-76°F to 320°F)
Limitorque • Superior reliability and durability above typical industry standards, thanks to
heavy-duty design and excellent corrosion resistance Refer to LFENBR0002 or LFENTB0002
• Regulatory compliance with the toughest industry standards, including EN 15714 at flowse ve.com/library.
and ISO 9001
RG, ARG and WRG

A ductile cast iron actuator series, ideal for general process and chemical applications where highly standardized
pneumatic actuators are required. It offers more than 250 torque profiles and significantly reduces transverse load
• Easier installation in tight spaces via pull-to-compress design and concentric SPECIFICATIONS
nested spring configur tion plus easy on-site field reconfigu tion Torque: 248 kNm (2.2M in-lb)
• Increased efficien y from canted yoke and support system, which delivers MAWP: 10.3 barg (150 psig)
approximately 20% higher break torque Temp: -55°C to 149°C (-67°F to 300°F)
• Greater process control via bidirectional travel stops that allow precise
adjustment of open and closed positions Refer to literature AXEBR1002
Automax at flowse ve.com/library.
• Environmental protection assured by IP67M (temporary submersion) rating and
Accord ™
marine-grade epoxy surface treatment
Worcester
flowserve.com 233
FLUID POWER
P N E U M AT I C — L I N K A G E
Turnex
The Turnex is a heavy-duty actuator for high-performance modulating control. It is also used for on-off service.
• Maintenance-free operation enabled by robust linkage system with bushing, providing SPECIFICATIONS
optimum torque curve for quarter-turn valves and eliminating play Torque: 60 to 20 000 Nm
• Seamless integration with NAF control valve package provided by unique direct (44 to 1475 ft-lb)
mounting concept MAWP: 8 barg (116 psig)
• Installation ease enhanced by internal air passages, eliminating external pipes Temp: -30°C to 80°C (-22°F to 176°F);
• Minimizes spare parts with unique system of sleeves for different stem diameters, to -40°C (-40°F) on request
plus more than three decades of parts consistency
NAF Refer to literature Fk 74.59
P N E U M AT I C — R A C K & P I N I O N
LRP
The Limitorque LRP actuator is robust and reliable. It is designed for high-performance automation of quarter-turn valves
in a wide range of applications.
• Improved reliability, performance stability and service life enabled by unique piston SPECIFICATIONS
support rods that ensure side loads are transmitted through the bearings, not the body Torque: 1700 Nm (1250 ft-lb)
• Efficient torque m tching ensured by the linear torque curve of the balanced double MAWP: 8 barg (116 psig)
rack and pinion design plus a large range of sizes Temp: -40°C to 150°C (-40°F to 302°F)
• Installation ease and application flexibility with ISO 5211 mounting with star drive
Limitorque output as well as Namur VDI/VDE 3845 top mounting and solenoid mounting patterns Refer to literature LFENBR0009
F39
High-cycle pneumatic power for on-off or throttling control of rotary valves and dampers. Available in double-acting or
spring-return configur tions.
• Longer service life enabled by piston support rods that eliminate the need for the body SPECIFICATIONS
to be used as a bearing surface Torque: 7100 Nm (62 835 in-lb)
• Increased efficien y from balanced double rack-and-pinion, eliminating side loads MAWP: 8.3 barg (120 psig)
• Faster operation speed is a standard feature, thanks to unique design enabling Temp: -40°C to 150°C (-40°F to 302°F)
unrestricted air fl w through guide rods
• Increased plant and personnel safety via long screws, allowing complete release of Refer to literature WCENBR1003
Worcester at flowse ve.com/library.
spring energy during disassembly

VALVES | LINEAR
ACTUATION
40R
& INSTRUMENTATION
Recognized as the leading name in the quarter-turn pneumatic actuator market for half a century. With 11 sizes
available, torque output can be closely matched to the required valve torque.
• Longer service life enabled by piston support rods that eliminate the need for the body SPECIFICATIONS
CONTROL
to be used as a bearing surface Torque: 7100 Nm (62 835 in-lb)
• Increased safety plus ease of maintenance from anti-blowout pinion, airfl w through MAWP: 8.3 barg (120 psig)
support rods, and long end cap screws to release spring energy Temp: -40°C to 150°C
• Application flexibility made possible by large size range and Namur VDE/VDI 3845 top- (-40°F to 302°F)
Norbro ® mounting pattern for easy fitting and interchangeability of ancilla y equipment
• Minimizes space requirements with compact fail-safe option, available in same body Refer to literature NBEBR0003
size as double-acting configur tion at flowse ve.com/library.
| FLUID POWER
33R
A 180-degree actuator derived from the world-renowned Norbro 40R, designed to compliment the Worcester Series
18/19 multi-way ball valve.
• Longer service life enabled by piston support rods that eliminate the need for the SPECIFICATIONS
body to be used as a bearing surface Torque: 2309 Nm (20 436 in-lb)
• Increased safety plus ease of maintenance from anti-blowout pinion, airfl w MAWP: 5.5 barg (80 psig)
through support rods, and long end cap screws to release spring energy Temp: -40°C to 150°C (-40°F to 302°F)
• Application flexibility made possible by large size range and Namur VDE/VDI 3845
Norbro top-mounting pattern for easy fitting and interchangeability of ancilla y equipment Refer to NBEBR0002 or NBEBR0003
• Easy installation in tight spaces via spring-return version, available in same body at flowse ve.com/library.
size as double-acting configur tion, creating a compact fail-safe option
P61
The P61 brings new levels of control to batch filling oper tions. Based on the 40R, it is designed specifically to provide
rapid, repeatable and highly accurate filling control for weigh/measuring processes
• Greater process control assured by two-stage operation which allows high fl w SPECIFICATIONS
followed by repeatable trickle fl w before closing Torque: 1063 Nm (9408 in-lb)
• Longer service life enabled by piston support rods that eliminate the need for the MAWP: 8.3 barg (120 psig)
body to be used as a bearing surface Temp: -40°C to 150°C (-40°F to 302°F)
Norbro • Increased safety from bolted-on cover sleeve, anti-blowout pinion, airfl w through
support rods, and long end cap screws to release spring energy Refer to NBEBR0004 or NBEBR0003
flowserve.com 235
FLUID POWER
Supernova
Supernova ASAP series rack and pinion actuators are designed for butterfl , plug or ball valves, and offer one compact
design for double acting and spring return.
• Increased efficien y and cycle life from precision die-cast pistons with large SPECIFICATIONS
cylinder bearings Torque: 5005 Nm (44 294 in-lb)
• Greater precision and reliability assured by integral travel stops in both directions, MAWP: 8 barg (120 psig)
plus 10 degrees of overtravel for precise adjustment Temp: -50°C to 150°C (-55°F to 302°F)
• Longer, trouble-free service life enabled by precision-extruded hard anodized
Accord Refer to ACENBR0004 or ACENBR0001
aluminum body and a one-piece, factory-lubricated, nitride-protected pinion gear
• Ease and flexibility of install tion via dual ISO 5211 mounting pattern at flowse ve.com/library.
SXL
Ideal for corrosive environments, the SXL Series utilizes a 316 stainless steel body with stainless steel or aluminum pistons
and springs. Optional polished finishes for sanita y applications also available.
• Longer service life and lower maintenance cost from corrosion-resistant materials SPECIFICATIONS
• Greater process control enabled by bi-directional travel stops, with 5° overtravel and Torque: 765 Nm (6770 in-lb)
10° undertravel adjustment in each direction MAWP: 8.3 barg (120 psig)
• Installation ease via ISO 5211 mounting with Namur VDE/VDI 3845 top-mounting Temp: -50°C to 150°C (-55°F to 302°F)
pattern for easy fitting and interchangeability of ancilla y equipment
Refer to literature LPR0006
Automax at flowse ve.com/library.
P N E U M AT I C — R O TA RY
NR
The Flowserve Valtek NR diaphragm rotary actuator features excellent sensitivity that provides quick, accurate movements
for precise control.
• Long operating life enabled by rolling diaphragm that creates minimal wear SPECIFICATIONS
• Lower maintenance and parts cost assured by simple design Torque: 5 to 1285 Nm
• Increased efficien y from ISO 9001-compliant design, allowing direct mounting of (43 to 11 381 in-lb)
positioners for minimal lost motion MAWP: 6 barg (80 psig)
Temp: -60°C to 70°C (-76°F to 158°F)
Valtek Refer to literature VLENIM0064

VALVES | LINEAR
ACTUATION
P N E U M AT I C — R O TA RY
VR
& INSTRUMENTATION
The Flowserve Valtek VR cylinder actuator is a high-pressure, compact actuator with high torque and pneumatic stiffness
for excellent throttling capabilities.
• Greater process control enabled by standard splined shaft connection that SPECIFICATIONS
CONTROL
eliminates backlash Torque: 8 to 4160 Nm
• Lower maintenance costs, greater ease of installation, and compliance with (72 to 36 820 in-lb)
seismic requirements assured by compact, lightweight and rugged design MAWP: 10.3 barg (150 psig)
• Long service life via low-friction bearings that provide millions of cycles with Temp: -60°C to 177°C (-76°F to 350°F)
Valtek minimal wear while minimizing hysteresis
• Increased plant and personnel safety made possible by air-purged, fully Refer to literature VLATB031
enclosed transfer case at flowse ve.com/library.
P N E U M AT I C — L I N E A R
| FLUID POWER
FlowAct
The FlowAct pneumatic diaphragm actuator is a high-thrust, multi-spring actuator for direct or reverse action — easy
installation and field reversible without additional parts
• High-speed performance enabled by low volume between diaphragm and case SPECIFICATIONS
• Greater efficien y from fabric-reinforced, roll-type diaphragm that maintains Thrust: 0.25 to 60 kN (56.2 to
linear stem positioning 13 488.5 lbf)
• Lower maintenance cost made possible by maintenance-free stem bushing MAWP: 6 barg (87 psig)
Temp: -40°C to 80°C (-40°F to 176°F)
Valtek Refer to literature SAENTBFACT
VL
The VL Series is the standard set of actuators for Valtek control valves, providing precise control and reliable
performance for more than 30 years.
• Increased efficien y provided by substantially higher thrust capabilities compared SPECIFICATIONS

to diaphragm actuators, allowing tighter valve shutoff Thrust: 15.85 to 262.53 kN
• Installation and maintenance ease made possible by exceptionally compact and (3564 to 59 020 lbf)
lightweight aluminum cylinder MAWP: 10.3 barg (150 psig)
• Ease of maintenance further enabled by durable construction and cylinder design, Temp: -40°C to 177°C (-40°F to 350°F)
Valtek which provides easy access to all internal components
• Lower installation and replacement costs with standard O-rings for static and Refer to literature VLENBR0002
dynamic seals at flowse ve.com/library.
flowserve.com 237
FLUID POWER
VL-C
Offering identical springs and all the advantages of Flowserve standard aluminum actuators, the VL-C replaces all
aluminum parts with carbon steel.
• High performance enabled by replacing all aluminum parts with carbon steel SPECIFICATIONS
• Lower maintenance costs and time from simple design Thrust: 15.85 to 134.11 kN
• Broad nuclear application flexibility provided by a variety of options and (3564 to 30 150 lbf)
accessories, allowing the VL cylinder to fit into almost a y application requiring MAWP: 10.3 barg (150 psig)
high thrust and low maintenance Temp: -40°C to 177°C (-40°F to 350°F)
Valtek • Low inventory carrying costs enabled by lower-cost VL soft goods that are easier
to fin Refer to literature VLENBR0002
VL-ES
Using many of the same design concepts as the VL-C, the VL-ES offers external spring cans for applications where longer
strokes or unusually high spring thrust are required.
• Longer service life — up to 2 million cycles — from dynamic quad seal design, SPECIFICATIONS
stronger springs, plug stem jam nut, and thrust bearings that prevent windup Thrust: 72.73 to 166.45 kN
• Installation and maintenance ease made possible by exceptionally compact and (16 350 to 37 420 lbf)
lightweight aluminum cylinder MAWP: 10.3 barg (150 psig)
• Ease of maintenance via spring cylinder actuator design requiring the removal of just Temp: -40°C to 177°C (-40°F to 350°F)
two parts to access all internal components
Valtek • Lower installation and replacement costs thanks to standard O-rings for static and Refer to literature VLENBR0002
dynamic seals at flowse ve.com/library.
VL-UHC
For applications where ultra high cycle (UHC) life is needed, VL-UHC Series actuators offer up to 2 million full stroke cycles
with periodic soft goods replacement.
• Significantly longer se vice life provided by dynamic quad seals, plug stem jam nut, SPECIFICATIONS
recessed O-ring adjusting screw seal, and stronger springs with stress-reducing Thrust: 15.85 to 125.88 kN
thrust bearings (3564 to 28 300 lbf)
• Lower maintenance costs and time from simple design that requires removal of just MAWP: 10.3 barg (150 psig)
two parts to access all internal components Temp: -40°C to 80°C (-40°F to 176°F)
Valtek • Broad nuclear application flexibility provided by a variety of options and accessories
allowing the VL cylinder to fit into almost a y application requiring high thrust and low Refer to literature VLENBR0002
maintenance at flowse ve.com/library.

VALVES | LINEAR
ACTUATION
Series 2 Type KP
& INSTRUMENTATION
Stainless steel actuators for standard use. Multi-spring design, fail-open or fail-close position, and various accessories
such as handwheels or limit stops make the KP actuator a frequent choice among operators.
• Broad application versatility offered by a wide range of sizes, integrated options SPECIFICATIONS
CONTROL
and accessories Thrust: to 35.0 kN (7868 lbf)
• Increased durability from stainless steel material, which provides superior corrosion MAWP: 6 barg (87 psig)
resistance, even without a protective coating Temp: -40°C to 80°C
• Installation ease and flexibility enabled by compact vari tions with enclosed (-40°F to 176°F)
accessories
Kämmer ®
| FLUID POWER
Series 4 Type KA
Compared to other manufacturers’ diaphragm actuator designs, Series 4 offers much higher thrust, compact design
and lighter weight. Field-reversible design may require no additional parts.
• Lower maintenance costs made possible by rugged positioner and internal design SPECIFICATIONS
that protects all moving parts against damage and dirt T hrust: to 25.5 kN (5735 lbf)
• Increased plant and personnel safety enabled by multiple-spring design, MAWP: 1.4 to 4.2 barg (20 to 60 psig)
improving safety of fail-safe mode Temp: -30°C to 80°C (-22°F to 176°F)
• Broad application versatility enabled by a wide variety of top-mounted options,
including handwheels, proximity switches and electric switches Refer to literature KMEEBR003
Kämmer at flowse ve.com/library.
HYDRAULIC
LHS and LHH

Suitable for on-off, modulating and control applications of quarter-turn valves in general and protective services.
Also useable in safety services up to SIL 3 in accordance with IEC 61508.
• Longer service life and lower maintenance provided by proven design with SPECIFICATIONS
25-year life cycle and maintenance intervals up to six years Torque: to 550 kNm (405 659 ft-lb)
• Broad application versatility enabled by true modular design for flexible and easy MAWP: 345 barg (5000 psig)
field conversion Temp: -60°C to 160°C (-76°F to 320°F)
• Regulatory compliance assured by reliable design that meets a wide range of
general service, protective service and safety application standards, including Refer to LFENBR0003 and LFENFL0003
ESD / HIPPS and SIL Level 3 in accordance with IEC 61508
• Extreme environment performance available with polar or offshore variants
flowserve.com 239
FLUID POWER
DIRECT GAS
LDG
A high-pressure pneumatic, piston-type, Scotch yoke actuator designed to operate on high-pressure pneumatic
supply fluids including pipeline gases and nitrogen. Certified for SIL 3
• Reduced equipment footprint due to compact dimensions and design SPECIFICATIONS

• Improved lifespan with 25-year design life and maintenance interval up to six Torque: to 550 kNm (405 659 ft-lb)
years, or as prescribed in EN 15714 for high-cycle applications MAWP: 105 barg (1500 psig)
• Simplified on-site maintenance for standard activities such as replacement of Temp: -40°C to 160°C (-40°F to 320°F)
Limitorque
Scotch yoke sliding block without removing the actuator from the valve
• Reduced environmental impact through Limitorque’s high-pressure rated MHPC Refer to literature LFENTB0005
control group that minimizes gas consumption and exhaust at flowse ve.com/library.

VALVES | LINEAR CONTROL | FLUID POWER
241
flowserve.com
Logix 3200MD
242

ACTUATION & INSTRUMENTATION | POSITIONERS
POSITIONERS
Dramatic improvements in process uptime, reliability and yield are facilitated at lower costs
with the Flowserve portfolio of ultra-high precision positioners. Return-to-operation times are
significantly reduced by advanced prognostic and diagnostic solutions that not only identify
fi ld problems, but expedite corrective actions. All models offer industry-leading embedded
measurement, data reduction and diagnostic functionality, while control system-independent
user interfaces facilitate performance configuration, operation and diagnosis with a single view.
Positioners – Quick Reference*

Product Sub-Type Air Capacity Air Consumption Repeatability Temperatures
20.4 Nm3/h @ 4 bar 0.5 Nm3/h @ 4 bar -40°C to 76°C

StarPac ® 3 Digital
(12 SCFM @ 60 psi) (<0.3 SCFM @ 60 psi)
0.25%
(-40°F to 170°F)
21 Nm3/h @ 6 bar <0.018 Nm3/h @ 6 bar -40°C to 80°C

D3 Digital
(12.5 SCFM @ 87 psi) (0.01 SCFM @ 87 psi) — zero bleed
<0.5%
(-40°F to 176°F)

D20 Digital
(4.2 SCFM @ 87 psi) (0.071 SCFM @ 87 psi)
<0.2%
(-4°F to 185°F)

D30 Digital
(29 SCFM @ 87 psi) (0.3 SCFM @ 87 psi)
<0.5%
(-40°F to 176°F)

Apex 9000 Digital
(4.2 SCFM @ 87 psi) (0.071 SCFM @ 87 psi)
<0.2%
(-4°F to 185°F)
30.6 Nm3/h @ 4.1 bar 0.082 to 0.637 Nm3/h @ 4.1 bar -52°C to 85°C
Logix 3800 Digital
(18 SCFM @ 60 psi) (0.048 to 0.375 SCFM @ 60 psi)
≤0.25%
(-61.6°F to 185°F)
20.8 to 30.6 Nm3/h @ 4.1 bar 0.082 to 0.637 Nm3/h @ 4.1 bar -52°C to 85°C
Logix MD+ Digital
(12.2 to 18 SCFM @ 60 psi) (0.048 to 0.375 SCFM @ 60 psi)
≤0.25%
(-61.6°F to 185°F)
20.8 Nm3/h @ 4.1 bar 0.082 Nm3/h @ 4.1 bar -52°C to 85°C
Logix 420 Digital
(12.2 SCFM @ 60 psi) (0.048 SCFM @ 60 psi)
≤0.25%
(-61.6°F to 185°F)
flowserve.com 243
Positioners – Quick Reference, cont’d.
Product Sub-Type Air Capacity Air Consumption Repeatability Temperatures

Logix 3200MD Digital
(12 SCFM @ 60 psi) (<0.3 SCFM @ 60 psi)
<0.05%
(-40°F to 176°F)

Logix 3400MD Digital
(12 SCFM @ 60 psi) (<0.3 SCFM @ 60 psi)
<0.05%
(-40°F to 176°F)
25.3 to 32.4 Nm3/h @ 6 bar 0.59 to 1.32 Nm3/h @ 6 bar -40°C to 85°C
P5 and EP5 Analog
(14.8 to 18.8 SCFM @ 87 psi) (0.35 to 0.78 SCFM @ 87 psi)
≤0.5%
(-40°F to 185°F)
23.7 to 44.4 Nm3/h @ 6 bar 0.53 Nm3/h @ 6 bar -20°C to 85°C

Apex 4000 Analog
(13.9 to 26.1 SCFM @ 87 psi) (0.31 SCFM @ 87 psi)
0.5%
(-4°F to 185°F)
25.3 to 32.4 Nm3/h @ 6 bar 0.59 to 1.32 Nm3/h @ 6 bar -40°C to 85°C
Apex 7000 Analog
(14.8 to 18.8 SCFM @ 87 psi) (0.35 to 0.78 SCFM @ 87 psi)
≤0.5%
(-40°F to 185°F)

VALVES | LINEAR
ACTUATION
D I G I TA L
StarPac 3
& INSTRUMENTATION
The StarPac 3 digital positioner offers repeatability, accuracy and quick system response time with a small footprint
and simple installation.
• Greater process control with built-in diagnostics compared to traditional control SPECIFICATIONS
CONTROL
loop technology Air Cap: 20.4 Nm3/h @ 4 bar
• Significantly higher response time via built-in process sensors with a sample r te (12 SCFM @ 60 psi)
of 16 times per second and typical loop time of 3 milliseconds Air Con: 0.5 Nm3/h @ 4 bar
• Greater accuracy from control valve with digital positioner, including valve position (<0.3 SCFM @ 60 psi)
sensor and actuator pressure sensors Repeatability: 0.25%
Valtek • Lower installation and operating costs enabled by compact design that eliminates Temp: -40°C to 76°C (-40°F to 170°F)
Kammer separate line taps and long runs of straight piping
D I G I TA L
| POSITIONERS
D3
The D3 is suitable for linear or rotary valves, single- or double-acting actuators, and special applications. Available with
general purpose, intrinsically safe and explosion-proof housings, with plug-in modules for limit switches and feedback.
• Lower operational cost made possible by zero-bleed pneumatic relay that enables SPECIFICATIONS
very low air consumption to minimize electricity costs and meet EPA bleed limits Air Cap: 21 Nm3/h @ 6 bar
for natural gas applications (12.5 SCFM @ 87 psi)
• Installation and configur tion ease enabled by friction clutch, five simple keys and Air Con: <0.018 Nm3/h @ 6 bar (0.01
large graphic LCD display SCFM @ 87 psi) – zero bleed
PMV ™ • Broad application versatility with Hart, PROFIBUS PA, PROFIBUS DP, Foundation Repeatability: <0.5%
Fieldbus and industry-leading IEC ISA100 wireless communication technology Temp: -40°C to 80°C (-40°F to 176°F)
• ATEX, IECEx, CSA, FM and SIL 2 approvals available with some configur tions
Refer to PMENBR0001 or PMENBR0021
D I G I TA L
D20
This compact digital positioner suits both linear and rotary actuators in single-acting applications. Very high control
precision on even the smallest valves. IS, NI and explosion-proof versions.
• Greater process control with very high precision, even on the smallest valves, plus SPECIFICATIONS
add-in switches and 4-20 mA position feedback options Air Cap: 7.2 Nm3/h @ 6 bar
• Installation and operation ease from friction clutch, compact design, and single- (4.2 SCFM @ 87 psi
button quick auto-calibration feature that tunes the D20 in seconds Air Con: 0.12 Nm3/h @ 6 ba
• Broad application versatility made possible by flexible design th t allows (0.071 SCFM @ 87 psi)
mounting to VDI/VDE 3845 (rotary) and VDI/VDE 3847 (linear with integrated Repeatability: <0.2%
PMV tubing) standards Temp: -40°C to 85°C (-4°F to 185°F)
• ATEX, IECEx, CSA and FM approvals available with some configur tions
flowserve.com 245
POSITIONERS
D I G I TA L
D30
The D30 is a robust, intelligent positioner with very high air capacity. Based on proven digital technology, it features a
large, high-performance spool valve controlled by a unique intelligent control algorithm.
• High-volume performance enabled by robust, high-capacity design that eliminates the SPECIFICATIONS
need for boosters Air Cap: 45.6 Nm3/h @ 6 bar
• Installation and operation ease from quick calibration and friction clutch to simplify (29 SCFM @ 87 psi)
commissioning plus a preloaded spring to eliminate play in the feedback mechanism Air Con: 0.5 Nm3/h @ 6 bar
• Broad application versatility via modular design that suits almost any control valve — (0.3 SCFM @ 87 psi)
PMV small or large, rotary or linear; options also include remote mounting of positioner Repeatability: <0.5%
• Lower maintenance costs and downtime with ValveSight DTM predictive diagnostics Temp: -40°C to 80°C (-40°F to 176°F)
D I G I TA L
Apex 9000
The Apex 9000 is a compact digital positioner designed specifically for VDI/VDE 3845 rotary actuators. It offers excellent
control at an affordable price.
• Installation and operation ease from friction clutch, compact design plus quick SPECIFICATIONS
calibration and commissioning Air Cap: 7.2 Nm3/h @ 6 bar
• Greater process control with add-in switches and 4-20 mA position feedback options (4.2 SCFM @ 87 psi)
• Increased plant and personnel safety with intrinsically safe, non-incendive, or Air Con: 0.12 Nm3/h @ 6 bar
explosion-proof FM, CSA, IECEx and ATEX options
Accord (0.071 SCFM @ 87 psi)
Repeatability: <0.2%
Temp: -40°C to 85°C (-4°F to 185°F)
Refer to literature ACENBR0007
D I G I TA L
Logix 3800
Latest generation Digital HART and Foundation Fieldbus positioners designed for superior performance and reliability.
The Logix 3800 Series can be easily configured using local buttons handhelds or ValveSight software.
• SIL 3 capable, robust construction works in the harshest conditions for temperature, SPECIFICATIONS
vibration, dirt, moisture, etc. Air Cap: 30.6 Nm3/h @ 4.1 bar
• High performance and precision control are provided by sensitive non-contact (18 SCFM @ 60 psi)
feedback sensor coupled with poppet-style relay. Predictive algorithms continuously Air Con: 0.082 to 0.637 Nm3/h @ 4.1 bar
monitor the health of the valve and actuator. (0.048 to 0.375 SCFM @ 60 psi)
• Simple to use, one-button setup automatically configures the zero span and gain of Repeatability: ≤0.25%
Valtek the positioner for most valves in less than 60 seconds Temp: -52°C to 85°C (-61.6°F to 185°F)
Automax • Adaptable design is configurable to interface with valve process and control system
Kammer needs using HART, Foundation Fieldbus, 4-20 or discrete I/O signals Refer to literature LGENBR3100-00
at fl wserve.com/library.

VALVES | LINEAR
ACTUATION
D I G I TA L
Logix MD+
& INSTRUMENTATION
Digital HART positioners with state-of-the-art piezo technology for superior performance and reliability. The Logix MD+
Series can be easily configured using local buttons HART handheld and ValveSight software.
• Greater process control enabled by fast CPU, precision components, inner loop SPECIFICATIONS
CONTROL
control and advanced control algorithms Air Cap: 20.8 to 30.6 Nm3/h @ 4.1
• Increased reliability via temperature and humidity sensors, which detect bar (12.2 to 18 SCFM @ 60 psi)
developing issues and prevent failures Air Con: 0.082 to 0.637 Nm3/h @ 4.1
• Greater durability from heavy-duty housing, providing tough protection from dust, bar (0.048 to 0.375 SCFM @ 60 psi)
liquids and impact in the most demanding environments Repeatability: ≤0.25%
Valtek • Hazardous area performance assured by intrinsically safe electronics that meet Temp: -52°C to 85°C (-61.6°F to 185°F)
Automax ATEX, IECEx and North America (cFMus)
Kammer Refer to literature LGENBR0109
D I G I TA L
| POSITIONERS
Logix 420
The Logix 420 is a compact, cost-competitive solution for the single-acting, explosion-proof, intrinsically safe and
non-incendive markets. Supports HART 6 and 7 protocols.
• Installation and operation ease assured by one-button calibration, easy user SPECIFICATIONS
interface, LCD screen and ValveSight DTM software Air Cap: 20.8 Nm3/h @ 4.1 bar
• Greater accuracy and reliability made possible by precision components, inner (12.2 SCFM @ 60 psi)
loop control and advanced control algorithms Air Con: 0.082 Nm3/h @ 4.1 bar
• Comprehensive online diagnostics and intuitive health display (0.048 SCFM @ 60 psi)
Valtek • Explosion-proof compliance with Class I Division 1 and ATEX Ex d installations, Repeatability: ≤ 0.25%
Automax intrinsically safe design certified for Class I Division 1 and Ex ia pplications, plus Temp: -52°C to 85°C (-61.6°F to 185°F)
Kammer non-incendive approvals
Refer to literature LGENBR0106
D I G I TA L
Logix 3200MD
A digital HART positioner with state-of-the-art piezo technology to provide superior performance and reliability. Easily
configured using local buttons HART handheld or ValveSight software.
• Installation ease assured by automatic calibration and tuning SPECIFICATIONS

• Faster diagnostic feedback and summaries made possible by burst mode Air Cap: 20.4 Nm3/h @ 4 bar
• Greater process control with 4-20 mA position feedback card option (12 SCFM @ 60 psi)
Air Con: 0.5 Nm3/h @ 4 bar
(<0.3 SCFM @ 60 psi)
Valtek Repeatability: <0.05%
Automax Temp: -40°C to 80°C (-40°F to 176°F)
Kammer Refer to LGENBR3000 or LGENIM0059
flowserve.com 247
POSITIONERS
D I G I TA L
Logix 3400MD
A digital Foundation Fieldbus positioner with state-of-the-art piezo technology to provide superior performance and
reliability. ITK 6.1 certified
• Installation ease assured by automatic calibration and tuning SPECIFICATIONS

• Faster diagnostic feedback and summaries made possible by burst mode Air Cap: 20.4 Nm3/h @ 4 bar
• Easily configured using local buttons FF handheld or ValveSight software (12 SCFM @ 60 psi)
• Function blocks for AO, PID, DI, DO, input selector and output splitter Air Con: 0.5 Nm3/h @ 4 bar
(<0.3 SCFM @ 60 psi)
Repeatability: <0.05%
Valtek Temp: -40°C to 80°C (-40°F to 176°F)
Automax
Kammer Refer to LGENBR3404 or LGENBR3405
A Worldwide Network Keeps

Your Business in Motion
Flowserve actuators are known for their dependability and ruggedness.
But, when you need service, every member of the Flowserve team is
committed to minimizing your downtime. Quick Response Centers and
Blue Ribbon Service Centers are strategically located in the Americas,
China, India, Middle East, and Europe to make sure you receive
premium service and expertise whenever you need it — even with
very short lead times.
ANALOG
P5 and EP5
Fast and accurate general purpose positioners available in pneumatic (P5) or electropneumatic (EP5) configur tions.
Choose from explosion-proof (EP5-EX), fail freeze (EP5-FS) and intrinsically safe (EP5-IS) options.
• Enhanced performance from high-gain, high-capacity spool valve assembly, providing SPECIFICATIONS
very quick and accurate actuator and valve response plus simple commissioning with Air Cap: 25.3 to 32.4 Nm3/h @ 6 bar
non-interactive, zero-span adjustment (14.8 to 18.8 SCFM @ 87 psi)
• Longer service life assured by robust, simple design, delivering maximum reliability in Air Con: 0.59 to 1.32 Nm3/h @ 6 bar
all environments (0.35 to 0.78 SCFM @ 87 psi)
• Versatility from compact, modular design, allowing for simple addition of I/P
PMV Repeatability: ≤0.5%
converters and F5 feedback unit; suitable for single- or double-acting applications Temp: -40°C to 85°C (-40°F to 185°F)

ACTUATION & INSTRUMENTATION | POSITIONERS
ANALOG
Apex 4000
A compact, lightweight and cost-efficient positione , the Apex 4000 is suitable for all rotary or linear valves, single- and
double-acting.
• Corrosive environment capability assured by epoxy powder-coated aluminum SPECIFICATIONS

construction of all exposed parts, plus gold-plated spool valve Air Cap: 23.7 to 44.4 Nm3/h @ 6 bar
• Greater reliability from compact, rugged design with few moving parts (13.9 to 26.1 SCFM @ 87 psi)
• Broad application versatility provided by multiple cam options Air Con: 0.53 Nm3/h @ 6 bar
• Quick and simple calibration uses thumbwheels and requires only a fl t-head (0.31 SCFM @ 87 psi)
Accord screwdriver; span adjustment performed internally with external zero adjustment Repeatability: 0.5%
Automax • Easy field upgradability to electro-pneum tic I/P options without removing cover Temp: -20°C to 85°C (-4°F to 185°F)
PMV Refer to literature AXAPS014
ANALOG
Apex 7000
The Apex 7000 Series provides accurate valve positioning with advanced features. Usable with 3–15 psi pneumatic
control signals, or optional current-to-pressure transducer for 4-20 mA signal input.
• Corrosive environment capability assured by epoxy powder-coated aluminum SPECIFICATIONS

construction of all exposed parts, plus gold-plated spool valve Air Cap: 25.3 to 32.4 Nm3/h @ 6 bar
• Greater reliability from compact, rugged design with few moving parts (14.8 to 18.8 SCFM @ 87 psi)
• Broad application versatility provided by multiple cam options Air Con: 0.59 to 1.32 Nm3/h @ 6 bar
• Installation ease with quick and simple non-interacting, zero-span adjustment (0.35 to 0.78 SCFM @ 87 psi)
Accord • Easy field upgradability to electro-pneum tic I/P options without removing cover Repeatability: ≤0.5%
Automax Temp: -40°C to 85°C (-40°F to 185°F)
PMV Refer to AXENPS0125 or AXENBR0006
flowserve.com 249
XCL/XML Series
Ultraswitch
250

ACTUATION & INSTRUMENTATION | SWITCH BOXES
SWITCH BOXES
Flowserve switch boxes have a proven track record for accurate and reliable position
signaling in linear and rotary applications. Providing both visual and remote electrical
position indications, these cost-effective, compact units offer unparalleled performance
with ease of installation and calibration. Rugged, corrosion-resistant enclosures have
multiple switch options and meet IP66/67 and NEMA Type 4X standards. Intrinsically safe,
non-incendive and explosion-proof designs ensure safe, reliable operation in hazardous

environments.
Switch Boxes – Quick Reference

Product Sub-Type No. of Switches Temperatures
WS/WM -40°C to 80°C

Switch Boxes 0 to 2
Series Ultraswitch® (-40°F to 180°F)
PS/PM -40°C to 80°C

Switch Boxes 2 or 4
Series Ultraswitch (-40°F to 180°F)
DS/DM -55°C to 85°C

Switch Boxes 0 to 4
XCL/XML -40°C to 85°C

Switch Boxes 0 to 4
-40°C to 85°C
F5 Series Switch Boxes 2
(-40°F to 185°F)
-20°C to 80°C
Aviator II Ultraswitch Switch Boxes 0 to 4
(-4°F to 80°F)
flowserve.com 251
SWITCH BOXES
SWITCH BOXES
WS/WM Series Ultraswitch

Intrinsically safe and non-incendive compact switch box for chemical, petrochemical, food and beverage, municipal,
wastewater and pharmaceutical applications. Meets requirements for ATEX and cCSAus hazardous locations.
• Easy installation ensured by compact housing with multiple mounting possibilities and SPECIFICATIONS
up to four conduit entries with pre-wired switches No. of Switches: 0 to 2
• Configur tion flexibility due to range of domed and flat indicators plus low profile units Temp: -40°C to 80°C (-40°F to 180°F)
without indicators
• Ingress protection ensured by design that meets IP66/67 and NEMA Type 4X standards Refer to literature AXENBR0135
• Choice of aluminum or corrosion-resistant resin enclosures at flowse ve.com/library.
Automax
PMV
SWITCH BOXES
PS/PM Series Ultraswitch

Intrinsically safe and non-incendive, the PS/PM features a lightweight, modular design with corrosion-resistant engineered
resin enclosure. It is ideal for chemical, petrochemical, municipal, wastewater and pharmaceutical applications.
• Large range of global IS, NI and mb certific tes enables use in all major applications SPECIFICATIONS
worldwide No. of Switches: 2 or 4
• Application flexibility due to the ability to be easily and directly mounted onto Temp: -40°C to 80°C (-40°F to 180°F)
actuators for both rotary and linear applications with multiple switch options
• Optional continuous position feedback and bus communication Refer to literature PMENBR0018
• Ingress protection ensured by design that meets IP66/67 and NEMA Type 4X standards at flowse ve.com/library.
Automax
PMV
SWITCH BOXES
DS/DM Series Ultraswitch

The DS/DM Ultraswitch provides reliable position signaling for the highest class Ex d IIC/Group A hazardous location areas.
Available with aluminum or stainless steel enclosure for chemical, oil and gas, pharmaceutical and offshore applications.
• Meets IP66 and NEMA Type 4X standards and is offered for general purpose, SPECIFICATIONS
weatherproof and IIC/Group A explosion-proof hazardous locations No. of Switches: 0 to 4
• Highly configurable with numerous options for switches, housing materials and Temp: -55°C to 85°C (-67°F to 180°F)
terminals, among many others
• Easy installation owing to multiple mounting possibilities, up to three conduit entries Refer to literature PMENBR0020
and pre-wired switches at flowse ve.com/library.
Automax
PMV

VALVES | LINEAR
ACTUATION
SWITCH BOXES
XCL/XML Series Ultraswitch
& INSTRUMENTATION
The XCL/XML position indicator is globally certified explosion-proof and flame-proof for oil and ga chemical,
petrochemical, food and beverage, municipal, wastewater and pharmaceutical applications.
• Ease of use provided by UltraDome™ visual indicator, which provides a wide- SPECIFICATIONS
CONTROL
angle view of the valve position, and Quick-Set™ cams, which offer easy, tool- No. of Switches: 0 to 4
free adjustment of sensing position Temp: -40°C to 85°C (-40°F to 180°F)
• Long service life provided by durable die cast aluminum housing with dichromate
undercoat and electrostatic powder topcoat for corrosion resistance Refer to literature AXENBR0006
• CSA/ATEX-approved for hazardous locations at flowse ve.com/library.
Automax • Application versatility owing to a watertight position indicator and multiple
PMV mounting options for any rack and pinion, Scotch yoke or other rotary actuator
SWITCH BOXES
| SWITCH BOXES
F5 Series
Feedback system offering the ability to add switches (mechanical or proximity), a potentiometer or a 4-20 mA
transmitter to the P5/EP5 analog positioners. Intrinsically safe and explosion-proof enclosure versions available.
• Reliable operation provided by a compact and sturdy design with vibration SPECIFICATIONS
resistance No. of Switches: 2
• Optimal performance resulting from a cam and spindle that are not splined to Temp: -40°C to 85°C (-40°F to 185°F)
achieve 100 percent resolution, which can be critical when used on control valves
• Application versatility owning to a wide range of limit switches and modular Refer to literature PMENBR0005
standard or explosion-proof housings that need no special mounting pieces at flowse ve.com/library.
PMV
SWITCH BOXES
Aviator II Ultraswitch
Integrated on-off valve controller with industry-leading capacity up to Cv 4.5. Meets the corrosive, hazardous and
non-hazardous location valve control and positioning needs of chemical, oil and gas, and other industries.
• Secure operation in hazardous environments ensured by an internal pilot solenoid SPECIFICATIONS

coil that contains and protects the coil No. of Switches: 0 to 4
• Longer service life due to internally vented, tapered tee spool valve that prevents Temp: -20°C to 80°C (-4°F to 80°F)
the ingress of corrosive atmospheres and permits bidirectional self-cleaning
• Lower total cost of ownership resulting from the internal pilot solenoid coil Refer to literature ACENPS0100
that also simplifies wiring reduces installation time and eliminates expensive at flowse ve.com/library.
Automax
explosion-proof conduit and fitting
PMV
flowserve.com 253
ValveSight DTMs for HART or
Fieldbus Communications
254

ACTUATION & INSTRUMENTATION | SOFTWARE
SOFTWARE
Make your operation more profitable and easier to manage with ValveSight software
solutions, intelligent digital tools backed by more than two centuries of Flowserve fluid
management expertise. Designed to be easy to use with minimal training, ValveSight
enhances the entire equipment lifecycle. From easy installation and commissioning to
superior operational control and maximum valve life, our software solutions help you get the
most from every device while minimizing costly delays and downtime.
Software – Quick Reference

Product Sub-Type Specification
ValveSight for • System Requirements: Windows XP, Windows 7, Windows 8, Windows 10
Positioners and Software • Compatibility: HART, PROFIBUS, Foundation Fieldbus, FDT/DTM
Switch Boxes • Equipment: valves, actuators, positioners and control signals
ValveSight DTMs • System Requirements: Windows XP, Windows 7, Windows 8, Windows 10

for HART or Fieldbus Software • Compatibility: Foundation Fieldbus; HART 6 and 7; FDT 1.2 and 2.0
Communications • Equipment: valves, actuators, positioners
• System Requirements: Windows XP, Windows 7, Windows 8, Windows 10

ValveSight DTM Software • Compatibility: StarPac 3, FDT 2.0, Modbus
• Major Systems: positioners, control systems
flowserve.com 255
SOFTWARE
SOFTWARE
ValveSight for Positioners and Switch Boxes

A proactive diagnostic solution for on-off and control valves that can be seamlessly integrated into host control or plant
asset management systems, improving plant efficien y without sacrificing safety and reliabilit .
• Reduced downtime enabled by early detection of emerging health issues and wear of SPECIFICATIONS
valves, actuators and positioners, preventing costly unplanned shutdowns • System Requirements: Windows XP,
• Reduced maintenance costs from proactive identific tion of components needing Windows 7, Windows 8, Windows 10
replacement • Compatibility: HART, PROFIBUS,
• Increased safety and efficien y via continuous online monitoring, equipment health Foundation Fieldbus, FDT/DTM
tests, and prevention of on-off valves sticking in end positions • Equipment: valves, actuators,
PMV • Reduced startup costs from proven interoperability with numerous hosts and positioners and control signals
communication protocols; plus quick and easy local or remote commissioning
Refer to literature PMENBR0016
SOFTWARE
ValveSight DTMs for HART or Fieldbus Communications

ValveSight software is designed to help engineers and maintenance personnel responsible for managing HART or Fieldbus
positioners by simplifying setup, calibration, configur tion and diagnostics.
• Decreased maintenance costs via predictive diagnostics able to identify and assess SPECIFICATIONS
the severity of developing problems in valves, actuators, positioners or control loop • System Requirements: Windows XP,
configur tions while the process is online and operating Windows 7, Windows 8, Windows 10
• Reduced downtime made possible by real-time condition monitoring, including long- • Compatibility: Foundation Fieldbus;
term trends, event capture, signatures, logs, hysteresis, deadband, repeatability and HART 6 and 7; FDT 1.2 and 2.0
Logix linearity (HDRL) testing • Equipment: valves, actuators,
• Simple, accurate installation and operation enabled by integrated calibration and positioners
configur tion tools and contextual help system
Refer to LGENSF0014 and VSENBR0004
SOFTWARE
ValveSight DTM
StarPac ValveSight DTM is the software used by the revolutionary StarPac, enabling rapid fl w measurement and
intelligent control. Improves operations at a cost lower than conventional control systems.
• Greater process control from system that gives users a unique, integrated view at a SPECIFICATIONS
single point • System Requirements: Windows XP,
• Greater efficien y with automatic PID control for fast integral adjustments to liquid Windows 7, Windows 8, Windows 10
fl w, P1, P2, delta pressure, temperature, gas fl w or auxiliary 4-20 mA signals • Compatibility: StarPac 3, FDT 2.0,
• Configur tion and operation ease enabled by FDT/DTM 2.0 user interface with Modbus
Valtek integrated help system • Major Systems: positioners, control
systems
Refer to literature FLENMN0066-02l

ACTUATION & INSTRUMENTATION | SOFTWARE
257
flowserve.com
INDEX
Numbers Anchor/Darling Tilting Disk ................... 198
33R ....................................................... 229 Anchor/Darling T-Pattern ...................... 190
40R ....................................................... 229 Anchor/Darling Y-Pattern ...................... 189
682 Water Seal Coolers ........................ 131 AOH ........................................................ 64
1878 Piston Check................................. 196 Apex 4000 ............................................ 243
1878 Swing Check ............................... 197 Apex 7000 ............................................ 243
1878 T-Pattern ...................................... 190 Apex 9000 ............................................ 240
1878 Y-Pattern ...................................... 188 APKD ...................................................... 50

ASH ........................................................ 64
A
Aviator II Ultraswitch ............................. 247
ADH ........................................................ 64
B
AEH ........................................................ 63
AFH9000 ................................................. 28 Barge VTP .............................................. 48
AFH9500 ................................................. 83 Bearing Gard ........................................ 136
AFV ......................................................... 48 BGM ..................................................... 136
Airfin Seal Cooler .................................. 132 Big Max BX2001 ................................... 160
AKH ........................................................ 63 Bladder Accumulators .......................... 130
AKH2 .................................................... 152 Bolted Gland – Iron .............................. 204
AKH2-300 ............................................. 152 Bolted Gland – Steel ............................. 205
AKH2A .................................................. 153 BP ........................................................... 42
AKH3 .................................................... 153 BRC and BRCSH .................................. 102
AKH5 .................................................... 153 BTV ....................................................... 161
AKH6 Fully Lined Tank Drain ................ 155 Buffer/Barrier Fluid Reservoirs ............. 130
AKH7-KP .............................................. 154 Buffer/Barrier Gas Panels ..................... 131
AKH8 .................................................... 154 BulkTite ................................................. 127
AKL and AKV .......................................... 66 BX, BXQ and BXB ................................ 101
Allpac ................................................... 117 BXHHS and BXHHSB ........................... 101
AMP3 .................................................... 155 BXLS ..................................................... 100
Ampliflow .............................................. 112 BXRH .................................................... 101
Anchor/Darling Piston (Lift) Check ....... 196 Byron Jackson SUBM ............................. 51
Anchor/Darling Swing Check Valve ...... 197

C D
CA ........................................................... 78 D3 ......................................................... 239

CAM ........................................................ 79 D20 ....................................................... 239
CavControl ............................................ 178 D30 ....................................................... 240
CBE and CBM ........................................ 17 D800 ....................................................... 18
CBT ......................................................... 18 D and DP ................................................ 97
CEB ........................................................ 65 DBS ........................................................ 20
CEH ........................................................ 63 DeviceNet ............................................. 219
ChannelStream ..................................... 179 DFSS and DVSS ..................................... 77
CHTA ...................................................... 42 DiamondBack ....................................... 179
Circpac CB, LO and HP ....................... 110 DIPV – Double-Isolation ........................ 206
Circpac MD .......................................... 126 DMX ........................................................ 36
Circulators ............................................ 131 Double Block and Bleed ...................... 150
Cleanpac D, F and DL .......................... 111 Double Disk .......................................... 183
CN .......................................................... 78 Double-Isolation – Steel ........................ 207
CPT ....................................................... 166 DRV ........................................................ 66
CPXV ...................................................... 54 Drypac .................................................. 112
CRO ........................................................ 94 DS ........................................................... 19
Cryogenic Ball ...................................... 148 DS/DM Series Ultraswitch .................... 246
Cryogenic Ball Valve ............................ 151 Duball DL .......................................146, 167
CryoSeal ............................................... 148 DuraClear ............................................. 136
CSB ........................................................ 41 DVSH ...................................................... 34
CSX ......................................................... 39 DVSR ...................................................... 37
CT6 ......................................................... 58 DWEER ................................................... 82
CVP (BSV and BCV) ............................... 83 Dynamic Balance – Iron ....................... 205
Cyclone Separator ................................ 138 Dynamic Balance – Steel ..................... 205
flowserve.com 259
E G
EC ........................................................... 36 G4 ......................................................... 203

ECPJ ....................................................... 55 G4Z-HF ................................................. 203
Edward Blow-off ................................... 188 GA .......................................................... 58
Edward Bolted Bonnet .......... 188, 189, 195 Gaspac T, L, D and S ........................... 110
Edward Tilting Disk ............................... 197 Gearex .................................................... 59
EG ........................................................... 79 GF-200 .................................................. 120
EK71 ..................................................... 147 GLS ....................................................... 126
Equiwedge ........................................... 182 GR .......................................................... 58
Equiwedge MSIV/MFIV ......................... 182 GSDH ................................................... 121
ERPN ...................................................... 26 GSG ...................................................... 126
ERT ......................................................... 82 GSL ....................................................... 120
ESP3 ....................................................... 54 GSS ...................................................... 125
Europac Series ....................................... 95 GTS ....................................................... 125
GTSP .................................................... 121
F
Guardian ................................................. 16
F5 Series ............................................... 247
GX-200 ................................................. 120
F39 ....................................................... 228
FK75M .................................................. 146 H
FK76M .................................................. 149 Hart with DTM ....................................... 219

FK79 ..................................................... 146 HBC Series Worm ................................. 223
Flanged Ball ......................................... 147 HDB and HSB ......................................... 42
Flex Wedge .......................................... 182 HDO and HSO ........................................ 43
F-Line ...................................................... 21 HDX ........................................................ 36
Flite-Flow .......................................187, 195 HED and HED-DS ................................... 37
Flite-Flow Main Steam Isolation ............ 187 HEGA ...................................................... 38
FlowAct ................................................. 231 HK35 ..................................................... 149
Foundation Fieldbus H1 with DTM ....... 218 HPX ......................................................... 25
FRBH ...................................................... 22 HPX6000 and HPXM6000 ...................... 28
HSH ........................................................ 96
HWMA .................................................... 26
HWX ........................................................ 27
Hydraulic Decoking Systems ................. 81

I LPN ......................................................... 35
ISC2 ........................................................ 88 LPS ....................................................... 227
ISC2-682 ................................................. 88 LR ........................................................... 34
ISC2-BB and ISC2-682BB .................... 100 LRP ....................................................... 228
ISC2-BX, ISC2-XB, ISC2-682BX LS-300 .................................................. 125
and ISC2-682XB ................................... 100 M

ISC2-MW .........................................88, 107
M ............................................................. 24
ISC2-PP and ISC2-682PP ....................... 93
Mach 1 .................................................. 203
ISC2-PX, ISC2–XP, ISC2-682PX
Magnetic Separator .............................. 137
and ISC2-682XP ..................................... 93
Mark 3 ASME .......................................... 16
K Mark 3 ISO .............................................. 16
KBSZ ...................................................... 80 Mark 100 ............................................... 171
KPH ........................................................ 72 Mark 200 ............................................... 171
KSCZ ...................................................... 81 Mark Eight ............................................ 172

Mark One .............................................. 170
L
Mark One Three-Way ............................ 170
L120 ..................................................... 215 Mark One-X .......................................... 170
LBSZ ....................................................... 80 Mark Two .............................................. 172
LC ........................................................... 25 MaxFlo 4 ............................................... 164
LDG ...................................................... 234 McCANNASEAL ................................... 156
LEH ......................................................... 72 ME .......................................................... 19
LEM and LEL .......................................... 71 MegaStream ......................................... 177
LHS and LHH ....................................... 233 MEN and MENBLOC .............................. 18
LNN ........................................................ 34 MEV ........................................................ 80
Logix 420 .............................................. 241 MF and MFV ........................................... 23
Logix 3200MD ...................................... 241 Mixerpac ............................................... 106
Logix 3400MD ...................................... 242 MJ and MJC ........................................... 52
Logix 3800 ............................................ 240 MN and MNV .......................................... 23
Logix MD+ ............................................. 241 Modbus DDC ........................................ 217
LPC ....................................................... 227 Modbus Ethernet TCP/IP ...................... 217
LPH ......................................................... 72 Molten Salt VTP ...................................... 49
flowserve.com 261
MP1 ........................................................ 59 ProCap Capping Valve ......................... 148
MPT ........................................................ 22 PROFIBUS DP V1 with
M Series ................................................ 106 Redundancy and DTM ......................... 218
MSL, MSM, MSC and MSH .................... 40 PROFIBUS PA ....................................... 218
MSP ........................................................ 27 PS/PM Series Ultraswitch ..................... 246
MSS ...................................................... 107 PSS 4 .................................................... 124
MSX ........................................................ 23 PVML ...................................................... 27
Multiport Series – Steel and Iron .......... 204 PVXM ...................................................... 26
MVE ........................................................ 22
Q
MVX ........................................................ 53
QBB and QB2B ...................................... 96
MX ........................................................ 216
QBQ and QBQ LZ .................................. 96
N QB, QBS and QBU ................................. 93
N2 Genpac ........................................... 112 QL and QLQ ........................................... 47
NAF Check ........................................... 198 QLC and QLQC ...................................... 49
NM .......................................................... 40 QX ......................................................... 216
NR ......................................................... 230 QXM ...................................................... 216
N-Seal ..................................................... 77
R
P R ............................................................. 24
P5 and EP5 ........................................... 242 RA and RA-C .......................................... 95
P61 ....................................................... 229 Refill Ca t .............................................. 137
Pac-Seal ............................................... 124 RG, ARG and WRG .............................. 227
PHL ......................................................... 25 RIS ........................................................ 116
Piston Accumulators ............................. 130 Rising Stem Ball Valve (RSBV) ............. 152
PK ........................................................... 73 RJ and RJC ............................................ 52
PL ........................................................... 73 RLIJ ........................................................ 79
Pleuger SUBM ........................................ 51 RO .......................................................... 94
PL Series .............................................. 124
PM .......................................................... 73
PolyChem VGRP ..................................... 54

S Super Nordstrom
SB and SBD .......................................... 215 Two-Bolt Cover – Iron ........................... 206
SC ........................................................... 65 Super Nordstrom
Screwed Gland Type – Iron .................. 207 Two-Bolt Cover – Steel ......................... 206
Seal Gard ............................................. 137 Supernova ............................................ 230
Series 2 Type KP .................................. 233 Supplypac ............................................ 111
Series 4 Type KA .................................. 233 Survivor ................................................. 177
Setball ................................................... 164 SXL ....................................................... 230
Setball SF ............................................. 165 T

ShearStream HP ................................... 164
T4E ....................................................... 209
SideWinder ........................................... 179
Taper Plug ............................................ 207
Sight Glass Series ................................ 155
TB-MAG .................................................. 17
SIHIboost ................................................... 71
Terra-Titan ............................................... 52
SIHIdry ...................................................... 71
Three-piece Ball ................................... 147
Slab Gate .............................................. 183
TIPV – Twin Isolation ............................. 208
SLC Series ............................................ 116
Titan-Slurry ............................................. 24
SLD ....................................................... 138
TKH ......................................................... 38
Slimseal ................................................ 161
TMCBV ................................................. 166
SLM Series ........................................... 116
TMCBV C2, N2 and Z2 ......................... 178
SMB ...................................................... 215
Torex ..............................................161, 165
SMP ........................................................ 21
Trunnball DL ..................................151, 166
SMX ........................................................ 65
TSP ......................................................... 59
Split Wedge .......................................... 183
Turbopac 378 and 2100 ....................... 110
SR Series Spur ..................................... 222
Turnex ................................................... 228
ST ......................................................... 107
TX3 ....................................................... 160
StarPac 3 .............................................. 239
Stealth ................................................... 177
Subsea ................................................. 150
Super-H ................................................ 208
Super Nordstrom – Steel ...................... 204
flowserve.com 263
U VRA ....................................................... 106
UC and UCQ .......................................... 94 V Series Bevel ...................................... 222
UEA ........................................................ 38 VT1 ....................................................... 156
UHTW and DHTW ................................... 97 VTP ......................................................... 47
U-MAG .................................................... 17 VW1 ...................................................... 149
Univalve .........................................187, 195

W
UO and UOP .......................................... 97
Water Seal Cooler ................................. 132
UZDL ...................................................... 35
WCC ....................................................... 43
V WD and WDX .......................................... 39
Valdisk ...........................................160, 165 WDF ........................................................ 77
Valtek GS .............................................. 172 WFSD ...................................................... 82
ValveSight DTM .................................... 250 WG Series Worm .................................. 222
ValveSight DTMs for HART or WIK and WIKO ....................................... 43
Fieldbus Communications .................... 250 WS/WM Series Ultraswitch ................... 246
ValveSight for Positioners WTB ........................................................ 37
and Switch Boxes ................................. 250 WUC ....................................................... 50
VB2 and VB3 ........................................ 150 WUJ ........................................................ 47
VCT ......................................................... 48 WX .......................................................... 39
VL ......................................................... 231 WXB and WXB-B .................................... 41
VL-C ...................................................... 232 WXH and WXM ....................................... 40
VL-ES .................................................... 232

X
VL-UHC ................................................ 232
XCL/XML Series Ultraswitch ................. 247
VPC ......................................................... 50
VPL1700 ................................................. 55 Z
VPL3300 ................................................. 53 ZEN, ZDN, ZHN and ZDI ........................ 20
VPL3600 ................................................. 53 ZLN, ZLK and ZLI ................................... 19
V-Port .................................................... 154 ZTN, ZTK and ZTI ................................... 20
VR ......................................................... 231 Z-Trim ................................................... 178

flowserve.com 265
flowserve.com 267
Flowserve Corporation Flowserve Corporation has established industry leadership in the design and manufacture of its products.
When properly selected, this Flowserve product is designed to perform its intended function safely during
5215 North O’Connor Blvd. its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve
products might be used in numerous applications under a wide variety of industrial service conditions.
Suite 2300 Although Flowserve can provide general guidelines, it cannot provide specific data and warnings for all
possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper
Irving, Texas 75039-5421 USA sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user
should read and understand the Installation Instructions included with the product, and train its employees
Telephone: +1 937 890 5839 and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are
supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory
results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or
implied, regarding any matter with respect to this product. Because Flowserve is continually improving and
upgrading its product design, the specifications, dimensions and information contained herein are subject to
change without notice. Should any question arise concerning these provisions, the purchaser/user should
contact Flowserve Corporation at any one of its worldwide operations or offices.
©2019 Flowserve Corporation. All rights reserved. This document contains registered and unregistered
trademarks of Flowserve Corporation. Other company, product, or service names may be trademarks or service
FLS-1000a (EN/A4) October 2019 marks of their respective companies.

flowserve.com

3 Flowserve Catalogue

Uploaded by

Copyright:

Available Formats

3 Flowserve Catalogue

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3 Flowserve Catalogue

Uploaded by

Copyright:

Available Formats

PRODUCT CATALOG

Pumps | Seals | Valves | Actuation

Whether for pumps, compressors, mixers or steam turbines, Flowserve

Flowserve valves are found in the world’s toughest industries, where

From positioners and switches to remotely controlled, fully automated

Our industry-leading portfolio of pumps, seals, valves and actuation

Flowserve has an unrivaled combination of

Flowserve offers the world’s most

Technology and Insights Local Support Worldwide

OIL AND GAS

SERVICES THAT DRIVE SAFETY, RELIABILITY AND PERFORMANCE

PARTS, REPAIRS, UPGRADES AND FIELD SERVICES

• Repair and Upgrades — From machining to mechanical upgrades to

• Replacement Parts and Components — Using its broad network of

• Field Services — From maintenance to management, highly qualified

• Technical Assessments — Flowserve can perform system audits to

• Reliability Services — Flowserve offers standard solutions to improve

• Engineering Support — Flowserve engineers can engage remotely

ASSET MANAGEMENT AND OPTIMIZATION

EDUCATION AND TRAINING

the planet. High-volume and high-pressure Between Bearings. . . . . . . . . 30

Global customers can easily find

chemicals and solids to high-temperature process applications: that’s what’s engineered

operating environments to rugged power end bearing arrangements. Plus, maintenance-

Overhung – Quick Reference*

Chemical Process 1400 m3/h 220 m 25 bar -80°C to 400°C

Chemical Process 4540 m3/h 215 m 27 bar -73°C to 370°C

Chemical Process 375 m3/h 215 m 24 bar to 290°C

Chemical Process 360 m3/h 153 m 25 bar -29°C to 121°C

Chemical Process 102 m3/h 50 m 20 bar -29°C to 121°C

Chemical Process 650 m3/h 150 m 25 bar -40°C to 300°C

Chemical Process 2200 m3/h 160 m 25 bar -20°C to 350°C

* Additional products shown on next two pages

455 m3/h 150 m 15 bar to 120°C

MEN and 800 m3/h 140 m 16 bar -10°C to 120°C

3000 m3/h 110 m 16 bar to 120°C

5700 m3/h 110 m 27 bar to 120°C

ZLN, ZLK 1800 m3/h 140 m 16 bar to 170°C

ZTN, ZTK 1000 m3/h 95 m 16 bar to 350°C

ZEN, ZDN, 600 m3/h 90 m 40 bar to 230°C

1200 m3/h 100 m 10 bar to 110°C

135 m3/h 70 m 12 bar -40°C to 120°C

500 m3/h 250 m 25 bar to 105°C

2700 m3/h 15 m 7 bar to 100°C

9085 m3/h 100 m 14 bar to 150°C

600 m3/h 35 m 5 bar to 75°C

600 m3/h 90 m 19 bar to 63°C

45 500 m3/h 90 m 17 bar to 63°C

4545 m3/h 90 m 11 bar to 40°C

10 000 m3/h 90 m 10 bar to 120°C

10 000 m3/h 50 m 10 bar to 110°C

3600 m3/h 90 m 40 bar to 110°C

8000 m3/h 90 m 25 bar to 140°C

2000 m3/h 350 m 80 bar -160°C to 450°C

900 m3/h 400 m 40 bar to 450°C

1100 m3/h 230 m 60 bar -50°C to 350°C

500 m3/h 275 m 40 bar -100°C to 250°C

45 m3/h 440 m 64 bar -46°C to 260°C

500 m3/h 275 m 40 bar -100°C to 250°C