Catalog

Number

Notes

FEATURES & SPECIFICATIONS Type

INTENDED USE — Ideal one-for-one replacement of conventional lighting systems such as HID and
fluorescent. For use in light Industrial applications such as, warehousing and other large indoor spaces
with mounting heights ranging from 10' – permitted . Certain airborne contaminants can diminish
integrity of acrylic and LED's. Click here for Acrylic Environmental Compatibility table for LED High Bay
suitable uses.
CONSTRUCTION — Solid aluminum channel enables superior thermal performance at warm ambient
temperatures.
Acrylic Textured Clear (ATC) and semi-diffuse lens optional to provide glare control and LED protection.
ELECTRICAL — 70% lumen maintenance at >100,000 hours. Thermally protected driver standard with
0-10V dimming, 3kA/6kV surge protection is standard on MVOLT. 5kA/10kV surge protection is standard
I-BEAM® IBE
on HVOLT. Optional 5kA/10kV available on MVOLT. Surge protection is tested in accordance with IEEE/ANSI
standards. 12,000 through 30,000 Lumens
LSXR Sensor option provides increased energy savings.
INSTALLATION — Suitable for suspension by chain, cable, surface-mounting bracket, hook monopoint or
single (pendant) monopoint. Surface mounting not recommended. 2" offset mounting can be accomplished
with the optional THUN mounting bracket. To maintain ambient listing, fixture should be mounted at a
minimum plenum height of 18".
LISTINGS — UL, CUL listed. Damp location listed. Listed for use in ambient operating temperatures from
-40°C to 45°C. Thermal management system allows for safe operation during times when temperatures
rise to 55°C*.
DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC
Premium qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm
which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
7 6 5 4 3 2 1

A - 7/8" KNOCK OUT

21.93

10.97

3.21

1.81 11.33

1.75 3.26

C
18.86

8.21

4.21

A A
4.27
A
2.56
2.21
1.84

4.36
22.05
14.83
IBE L24 LUMINAIRE
Fixture utilizing back pack

IBE L24 LUMINAIRE

8 7 6 5 4 3 2 1

A - 7/8" KNOCK OUT

D D

43.97

42.50
A 4.00
41.00
ACUITYBRANDS
DRAWING PREPARED IN ACCORDANCE
THIRD ANGLE PROJECTION
WITH ANSI Y14.5M-1982
22.00 UNLESS OTHERWISE SPECIFIED:
3.21 DESCRIPTION:
DIMENSIONS ARE IN INCHES TOLERANCES:
ANGULAR: 2 IBE ASSEMBLY DRAWING HUB (IMLPMHB) OPTION
XX: .030
PROPRIETARY AND CONFIDENTIAL
XXX: .015
THIS PRINT IS THE CONFIDENTIAL PROPERTY
OF ACUITY BRANDS AND IS LOANED NAME DATE
SUBJECT TO RETURN UPON DEMAND AND MATERIAL
SIZE PART NO. REV
1.81
IBLPMP OPTION
DRAWN LDA 4/2/18

D
UPON EXPRESS CONDITION THAT IT WILL
NOT BE DISCLOSED TO ANY THIRD PARTY
WITHOUT THE PRIOR WRITTEN PERMISSION
OF ACUITY BRANDS OR USED DIRECTLY
FINISH CHECKED

ENG APPR.
+AIS700114
OR INDIRECTLY IN ANY WAY DETRIMENTAL
TO THE INTEREST OF ACUITY BRANDS DO NOT SCALE DRAWING MFG APPR. SCALE: 1:2 WEIGHT: SHEET 9 OF 10

7 6 5 4 3 2 1 6.30
5.23

WGIBE OPTION
4.21

C C
2.47
1.84

14.83
15.49

A A A A A 40.90

4.30
B B

44.00

IBE L48 LUMINAIRE IBE L48 LUMINAIRE

*Prolonged use at 55°C may impact long-term performance.

A A
ACUITYBRANDS
DRAWING PREPARED IN ACCORDANCE

INDUSTRIAL IBE
THIRD ANGLE PROJECTION
WITH ANSI Y14.5M-1982

UNLESS OTHERWISE SPECIFIED:

DESCRIPTION:
DIMENSIONS ARE IN INCHES TOLERANCES:
ANGULAR: 2 IBE ASSEMBLY DRAWING
XX: .030
PROPRIETARY AND CONFIDENTIAL
XXX: .015
THIS PRINT IS THE CONFIDENTIAL PROPERTY
NAME DATE

Page 1 of 5
OF ACUITY BRANDS AND IS LOANED
SUBJECT TO RETURN UPON DEMAND AND MATERIAL
DRAWN LDA 4/2/18 SIZE PART NO. REV

D
UPON EXPRESS CONDITION THAT IT WILL
NOT BE DISCLOSED TO ANY THIRD PARTY
WITHOUT THE PRIOR WRITTEN PERMISSION
OF ACUITY BRANDS OR USED DIRECTLY
FINISH CHECKED

ENG APPR.
+AIS700114
OR INDIRECTLY IN ANY WAY DETRIMENTAL
TO THE INTEREST OF ACUITY BRANDS DO NOT SCALE DRAWING MFG APPR. SCALE: 1:2 WEIGHT: SHEET 10 OF 10

8 7 6 5 4 3 2 1
IBE  LED High Bay
Looking for Contractor Select readily available
configurations? Click here to visit Contractor Select™
spec sheet or go to www.contractorselect.com

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example:  IBE L24 18000LM ATC MD MVOLT GZ10 40K 80CRI DWH
IBE MD GZ10
Series Fixture length Lumens Lens Distribution Voltage Driver Color temperature

IBE LED bay light L24 24" 12000LM 12,000 lumens ATC Acrylic MD Medium MVOLT 120-277V GZ10 0-10V 40K 4000 K
15000LM 15,000 lumens Textured semi- HVOLT 347V-480V2 dimming 50K 5000 K
diffuse lens,
18000LM 18,000 lumens .040" thick 120 120V
22000LM 22,000 lumens L/LENS Less lens1 208 208V
L48 48" 18000LM 18,000 lumens SD080 Semi-Diffuse 240 240V
acrylic, .080" 277 277V
22000LM 22,000 lumens thick
30000LM 30,000 lumens 347 347V4
480 480V4

Color rendering index Options Finish

80CRI 80 CRI E15WCP EM self-diagnostics battery pack, 15W, constant power CEC compliant3,5 Motion sensors: DWH Gloss white
BPK Fixture back pack (required with E15WCP) LCOZU Aisle motion sensor, pre-wired 5,9
OUTCTR Wiring leads pulled through back center of fixture (not available with back pack) LCHOSZU Aisle motion sensor, pre-wired;
SPD Surge protection device 4 programmable dimming 5,9
OCS RELOC® OnePass® 5' installed 5 LCPZU Aisle motion sensor with photo-
cell; pre wired 5,9
RRL RELOC®-ready luminaire. See page 5 for ordering information (must be ordered
separately) LAOZU 360° motion sensor, pre-wired 5,9
IMP Integrated modular plug (not available with 347V or 480V) 5,6 LAHOSZU 360° motion sensor, pre-wired;
programmable dimming 5,9
WGX Standard wire guard, installed
LAPZU 360° motion sensor with photo-
Cord sets: cell, pre-wired 5,9
CS1W 6' white cord with straight-blade plug, 120V 7,8 LAM0SZU 360 motion sensor, dimming and
CS3W 6' white cord with twist-lock plug, 120V 7,8 switching photocell, pre-wired
(T24 compliant) 5,9
CS7W 6' white cord with straight-blade plug, 277V 7,8
LCM0SZU Aisle motion sensor, dimming and
CS11W 6' white cord with twist-lock plug, 277V 7,8 switching photocell, pre-wired
CS25W 6' white cord with twist-lock plug, 347V 7,8 (T24 compliant) 5,9
CS97W 6' white cord with twist-lock plug, 480V 7,8
CS93W 6' white cord, 600V SEOOW , no plug (no voltage required)7

Accessories: Order as separate catalog number.

Mounting: Wire guards: Cord sets for IMP option:

IBAC120 M20 Aircraft cable 10' with hook (one pair) WGIBE Wire guard for use with L24 fixtures CS1WIMP Straight plug, 120V 7,8,12
IBAC240 M20 Aircraft cable 20' with hook (one pair) WGIBE4 Wire guard for use with L48 fixtures CS3WIMP Twist-lock, 120V 7,8,12
IBHMP Hook monopoint CS7WIMP Straight plug, 277V 7,8,12
ZACVH Aircraft 10' V hanger (one pair) CS11WIMP Twist-lock, 277V 7,8,12
IBLPMP Pendant monopoint splice box, includes side covers (not available with fixtures CS93WIMP 600V SO white cord, no plug
utilizing back pack when ordered with 347, 480 & HVOLT) 10 (no voltage required) 8,12
IBLPMPHB Pendant monopoint splice box with 3/4" hub, includes side covers (not avail-
able with fixtures utilizing back pack when ordered with 347, 480 & HVOLT) 10
HC36 Hanger chain, 36" (one pair)
THUN Tong hanger bracket (order 2 per fixture) 11

Notes 7 All cord sets are 18/3, 6', white. Additional lengths available 10', 15' and 20'. (ex. CS1WL10)
1 Visible pixilation is present when choosing L/LENS option. Not recommended for applications where direct 8 Cord sets are voltage specific. Specify voltage. Other configurations available. Consult factory.
viewing of high intensity LED’s will be unacceptable. 9 Other configurations available, see page four for additional options. Not available 208 or 240.
2 Ships standard with surge protection. 10 Additional support cables required when used with L48.
3 Utilizes fixture backpack. 30000LM only for use in ambient temperatures up to 35°C. Not available with IMP 11 For use in applications with ambient temperatures up to 35°C for 12000LM - 22000LM fixtures, 30°C for
option or cord with plug options. Utilizes PS1555CP. Not available with 347 or 480. 30000LM fixtures. Not for use on fixtures with E15WCP.
4 Ships standard on HVOLT, 347, and 480V and all Motion sensors. 12 Fixtures must have IMP option.
5 Must specify voltage.
6 Must be factory installed. Must have “IMP” power cord to power fixture. Cordsets may be ordered with fixture
or as accessory. Not available with E15WCP option.

IBE

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  techsupport-Industrial@acuitybrands.com  www.lithonia.com © 2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 09/26/18
Page 2 of 5
IBE  LED High Bay
IBH/IBE CONVERSION
IBH Existing IBE Contract Select Offering Need IBE 18L and 24L in a 2X4 to match existing IBH form factor?
IBH Nomenclature Size UPC IBE Nomenclature Size UPC IBE Nomenclature Size
IBH 12L MVOLT 2X2 889804709100 IBE 12LM MVOLT 40K 2X2 191848491010
IBH 12000LM SD080 MD MVOLT OZ10 50K 80CRI WH 2x2 889804681499 IBE 12LM MVOLT 50K 2x2 191848491096
IBH 15000LM SD080 MD MVOLT OZ10 40K 80CRI WH 2x2 889804708370 IBE 15LM MVOLT 40K 2x2 191848194133
IBH 15000LM SD080 MD MVOLT OZ10 50K 80CRI WH 2x2 889804708370 IBE 15LM MVOLT 50K 2x2 191848491058
IBH 18L MVOLT 2X4 889804710472 IBE 18LM MVOLT 40K 2X2 191848491027 IBE L48 18000LM ATC MD MVOLT GZ10 40K 80CRI DWH 2X4
IBH 18000LM SD080 MD MVOLT OZ10 50K 80CRI WH 2X4 889804711738 IBE 18LM MVOLT 50K 2x2 191848491072 IBE L48 18000LM ATC MD MVOLT GZ10 50K 80CRI DWH 2X4
IBH 24L MVOLT 2X4 889804710335 IBE 22LM MVOLT 40K 2x2 191848491195 IBE L48 22000LM ATC MD MVOLT GZ10 40K 80CRI DWH 2X4
IBH 24000LM SD080 MD MVOLT OZ10 50K 80CRI WH 2X4 889804712032 IBE 22LM MVOLT 50K 2x2 191848491133 IBE L48 22000LM ATC MD MVOLT GZ10 50K 80CRI DWH 2X4

PHOTOMETRICS
See www.lithonia.com.

OPERATIONAL DATA LUMENS VS. AMBIENT TEMPERATURE

Fixture Length Lumen Package Lens Option 40K, 80CRI 50K, 80CRI Ambient °C Ambient °F Lumen multiplier
ATC 11,306 11,652 0 32 1.035
12000LM SD080 11,377 11,726
10 50 1.021
L/LENS 12,267 12,643
25 77 1.000
ATC 13,967 14,395
15000LM SD080 14,055 14,486 30 86 0.993
L/LENS 15,155 15,619 35 95 0.986
L24
ATC 17,762 18,306 40 104 0.978
18000LM SD080 17,874 18,422 45 113 0.971
L/LENS 19,272 19,863
ATC 21,067 21,712
22000LM SD080 21,200 21,850
L/LENS 22,859 23,559
ATC 18,052 18,605
18000LM SD080 18,166 18,723
L/LENS 19,587 20,188
ATC 22,564 23,256
L48 22000LM SD080 22,707 23,403
L/LENS 24,486 25,234
ATC 27,845 28,698
30000LM SD080 28,021 28,880
L/LENS 30,213 31,139

CHARACTERISTICS
Lumen Wattage Dimensions - Inches (centimeters) Weight with ATC Lens
Length Comparable light source
package in Carton
120V 277V 347V 480V Length Width Depth
12000LM 83 82 81 81 22 (55.9) 15-1/4 (38.7) 4-3/8 (11.1) 8.2 lbs (3.7 kg) 175W MH, 4-lamp T8 HBF, 2-lamp T5HO
15000LM 107 105 104 104 22 (55.9) 15-1/4 (38.7) 4-3/8 (11.1) 8.2 lbs (3.7 kg) 200W MH, 6-lamp T8 NBF
L24
18000LM 137 137 131 132 22 (55.9) 15-1/4 (38.7) 4-3/8 (11.1) 8.2 lbs (3.7 kg) 250W MH, 6-lamp T8 HBF, 4-lamp T5HO
22000LM 166 165 161 161 22 (55.9) 15-1/4 (38.7) 4-3/8 (11.1) 8.2 lbs (3.7 kg) 400W MH, 6-lamp T5HO
18000LM 136 136 133 133 44 (111.8) 15-1/4 (38.7) 4-3/8 (11.1) 18 lbs (8.2 kg) 250W MH, 6-lamp T8 HBF, 4-lamp T5HO
L48 22000LM 166 165 161 161 44 (111.8) 15-1/4 (38.7) 4-3/8 (11.1) 18 lbs (8.2 kg) 400W MH, 6-lamp T5HO
30000LM 215 213 205 204 44 (111.8) 15-1/4 (38.7) 4-3/8 (11.1) 18 lbs (8.2 kg) 575W MH, 10-lamp T8 HBF

PROJECTED LUMEN MAINTENANCE

Operating hours 0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000
Lumen maintenance factor 100% 96% 94% 91% 89% 87% 85% 82% 80% 78% 76%

IBE

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  techsupport-Industrial@acuitybrands.com  www.lithonia.com © 2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 09/26/18
Page 3 of 5
IBE  LED High Bay
LSXR - Fixture Mount Sensor (see www.sensorswitch.com for additional information)
• Four interchangeable lenses.
• Integrated mounting bracket drops lens down 3” from chase nipple.
• Single or dual relay versions — designed with robust protection from the harsh switching requirements of T5 and LED loads.
• Photocell and 0-10VDC dimming options.
• No PIR field calibration or sensitivity adjustments required.
• Not available 208 or 240V.

LSXR configuration Comparable CMRB sensor Old style sensor nomenclature

For shortest lead times use one of the following LSXR configurations
LCOZU CMRB 50 MSI
LCH0SZU CMRB 50 D MSID
LCPZU CMRB 50 P MSIPED
LAOZU CMRB 6 MSI360
LAH0SZU CMRB 6 D MSI360D
LAPZU CMRB 6 P MSI360PED

SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME.

SINGLE RELAY CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS.
Example: LAH0SZU
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.

Series Lens option Dimming/Photocell Max. dim Level Min. dim level Temp/Humidity Default time delay

L LSXR passive A High mount, 360° O None 1

0 10 VDC S Minimum dimming Z None I 30 seconds
infrared indoor B Low mount, 360° H High/low occupancy operation 9 9 VDC level of ballast T Low D 2.5 minutes
occupancy sensor 1 1 VDC temperature
C High mount aisleway P Switching photocell (on/off) 8 8 VDC X 5 minutes
M Dimming and switching 7 7 VDC 2 2 VDC R 7.5 minutes
photocell 3 3 VDC U 10 minutes (with minimum
G Dimming and switching 4 4 VDC 15 minutes on time)
photocell with high/low 5 5 VDC V 15 minutes
occupancy operation
6 6 VDC W 20 minutes
Y 30 minutes

DUAL RELAY (Available with 120, 277, and 347V only) Example: LA2KZU
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.

Series Lens option Poles Operating mode Temp/Humidity Default time delay

L LSXR passive infrared A High mount, 360° 2 Dual relay J None Z None I 30 seconds
indoor occupancy sensor B Low mount, 360° K Alternating off relays (promotes even lamp wear) T Low temperature D 2.5 minutes
C High mount aisleway O Alternating off relays w/photocell X 5 minutes
P Switching photocell (on/off) R 7.5 minutes
E Photocell on/off (pole 1 only) U 10 minutes (with minimum
F Photocell on/off - both poles (dual set-point) 15 minutes on time)
V 15 minutes
W 20 minutes
Y 30 minutes

Example: LENS 50 J100

Replacement lenses: Order as separate catalog number.

Series Lens type Package quantity

Lens 6 High mount 360° U Unit
Notes
10 Low mount 360° J10 10-pack
1 Dimming level fields not required when this option is chosen.
50 High mount aisleway J100 100-pack

IBE

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  techsupport-Industrial@acuitybrands.com  www.lithonia.com © 2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 09/26/18
Page 4 of 5
IBE  LED High Bay

RRL - RELOC®-Ready Luminaire

• RRL connectors can be used with Quick-Flex®, System 820 and OnePass® systems.
• Load side of connector factory installed to luminaire.
• 4-pole mating connector with push-in terminations allows for simple installation.
• Touch-safe design on both halves meets UL/CSA requirement.
• Wiping contact design allows safe disconnect under load.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: RRLA

Series Wiring instructions

RRL RELOC®-ready luminaire A Hot conductor wired to position #1 (phase A) AE Hot conductor wired to position #1 (phase A), hot conductor #2 wired to posi-
tion #2 (phase B) 2
B Hot conductor wired to position #2 (phase B) ABE Hot conductor wired to position #1 (phase A), hot conductor #2 wired to posi-
tion #2 (phase B), inverter conductor wired to position #3 (phase C) 1,2
C Hot conductor wired to position #3 (phase C) 1 C12S Hot conductor in position #1 (phase A), low voltage conductor #1 in position
#2,low voltage conductor #2 in position #3 1,3
AB Outboard hot conductor wired to position #1 (phase A), inboard hot
conductor wired to position #2 (phase B)

Compatible RELOC® Cables for Industrial Luminaires (shipped and ordered separately) Notes
1 C, ABE, and C12S options are not used with Quick-Flex QFC,
QSFC, QPT, and QD.
2 AE and ABE commercial fixtures should disconnect the TSPL be-
fore unplugging the RRL so it does not go into discharge mode.
3 C12S option is used with the OnePass OD and 820 SSC, PT, and
DC for 0-10V/DALI applications.

OCS OCU OD

DC PT

IMP – Integrated Modular Plug

• The integrated modular plug (IMP) option allows the installer to plug and play.
• Cord sets connect quickly to any fixture with IMP option.

IMP compatible cord sets1

CS1WIMP Straight plug, 120V
CS3WIMP Twist-lock, 120V
CS7WIMP Straight plug, 277V
CS11WIMP Twist-lock, 277V
CS25WIMP Twist-lock, 347V
CS93WIMP 600V SEOOW white cord, no plug
Notes
CS97WIMP Twist-lock, 480V 1 Cord set required for fixture operation. All cord sets are 18/3, 6’ white.

IBE

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  techsupport-Industrial@acuitybrands.com  www.lithonia.com © 2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 09/26/18
Page 5 of 5