SOLENOID VALVES NC

2/2
Series
pilot operated
built-in pilot, floating diaphragm
238
3/8 to 2 NO

FEATURES
• Minimum operating pressure differential ∆P 0,3/0,5 bar
• Two way valves for automatic control of water, air and inert gas
and other gases/liquids compatible with the sealing materials used
• Interchangeability of magnetic heads, AC and DC
• The solenoid valves satisfy all relevant EC Directives
GENERAL
Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa]
Ambient temperature range -10°C to +60°C
Maximum viscosity 40 cSt (mm2/s)
Response time 3/8 1/2 3/4 1 1 1/4 1 1/2 2
opening time (ms) 25 30 55 70 300 300 1500

C
closing time (ms) 40 90 110 200 1000 1000 2000
fluids () temperature range (TS) seal materials ()
DN ≤ 25: air, inert gas and water NBR (nitrile)
-10°C to +85°C
DN > 25: air and water FPM (fluoroelastomer)
MATERIALS IN CONTACT WITH FLUID
() Ensure that the compatibility of the fluids in contact with the materials is verified
Body Brass
Internal parts Stainless steel and brass
Springs Stainless steel
Diaphragm & valve disc NBR
Seals and pilot disc FPM (3/8 to 1), NBR (1 1/4 to 2)
Shading coil Copper
ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable Ø 6-8 mm or Ø 6-10 mm)
Connector specification
for power coil: 4 W/6,9 W DIN 43650, 11 mm, industry standard B
for power coil: 5W/6,9W-8W/9W ISO 4400 / EN 175301-803, form A NC function
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
power ratings operator
ambient replacement coil
prefix inrush holding hot/cold temperature type (1)
option ~ ~ = rangef (TS) ~ =
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
12 6 4 5/6,9 -10 to +60 400127-197 400127-142 01 (2)
SC 10,4 6 5 5/6,9 -10 to +60 400727-117 400727-185 02
23 14 8 7,5/9 -10 to +50 43005275 43005272 03
(1)
Refer to the dimensional drawings on the following page. (2)
UL/CSA certified. NO function

SPECIFICATIONS
operating pressure options
catalogue
Availability, design and specifications are subject to change without notice. All rights reserved.

flow differential (bar)

pipe orifice power coil number
coefficient
man. operator

size size max. (PS) (W)

maintained

Kv
EPDM

min. air / water ()

FPM

(mm) (m3/h) (l/min) ~ = ~ = ~/=

NC - Normally closed
10 10 4 6,9 SCE238D001 MO V E
G* 3/8 12 2,4 40 0,3
16 16 5 6,9 SCE238D006 MO V E
10 10 4 6,9 SCE238D002 MO V E
12 2,4 40 0,3
16 16 5 6,9 SCE238D007 MO V E
G* 1/2
10 10 4 6,9 SCE238D003 MO V E
15 4,2 70 0,3
16 16 5 6,9 SCE238D008 MO V E
10 10 4 6,9 SCE238D004 MO V E
G* 3/4 20 6,6 110 0,3
16 16 5 6,9 SCE238D009 MO V E
10 10 4 6,9 SCE238D005 MO V E
G* 1 25 9,9 165 0,3
16 16 5 6,9 SCE238D010 MO V E
G 1 1/4 30 15 250 0,5 10 10 8 9 SCG238C016 MO V -
G 1 1/2 45 27 450 0,5 10 10 8 9 SCG238C017 MO V -
G2 45 34 566 0,5 10 10 8 9 SCG238C018 MO V -
NO - Normally open
00041GB-2013/R01

G 1 1/4 30 15 250 0,5 10 10 8 9 SCG238C019 - V -

G 1 1/2 45 27 450 0,5 10 10 8 9 SCG238C020 - V -
G2 45 34 566 0,5 10 10 8 9 SCG238C021 - V -

All leaflets are available on: www.asconumatics.eu

V316-1
 SOLENOID VALVES SERIES 238
OPTIONS
• Valves can also be supplied with FPM (fluorelastomer), EPDM (ethylene-propylene) seals, diaphragm and disc. Use the ap-
propriate optional suffix letter for identification
• Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 94/9/EC (see “Explosionproof solenoids” section)
• Oxygen service, suffix NV, example: SCE238C002NVMO (Except pipe size G 1 1/4, G 1 1/2 and G 2)
• Plug with visual indication and peak voltage suppression or with cable length of 2 m (see Solenoids, Coils & Accessories section)
INSTALLATION
• The solenoid valves can be mounted in any position without affecting operation
• Pipe connections (G*) have standard combination thread according to ISO 228/1 and ISO 7/1. Pipe connections (G) have
standard combination thread according to ISO 228/1
• Installation/maintenance instructions are included with each valve
SPARE PARTS KIT ORDERING EXAMPLES:
spare parts kit no. (1)
SC E 238 D 001 230V / 50 Hz
SC E 238 D 008 V 115V / 50 Hz
catalogue number SC E 238 D 004 E 24V / DC
SC G 238 C 016 230V / 50 Hz
~/= ~/=
SCE238D001/002/006/007 C131600 C140262V prefix
SCE238D003/D008 C131618 C140262V pipe thread voltage
SCE238D004/D009 C131606 C140262V basic number suffix
SCE238D005/D010 C131609 C140262V
(1)
Standard suffixes are also applicable to kits.
ORDERING EXAMPLES KITS:
C131600(1)
C131618 V
C140262 E
basic number suffix

DIMENSIONS (mm), WEIGHT (kg)

TYPE 01 TYPE 02 TYPE 03
Prefix “SC” Solenoid Prefix “SC” Solenoid Prefix “SC” Solenoid
Epoxy moulded Epoxy moulded IEC 335 / ISO 4400
IEC 335 / DIN 43650 IEC 335 / ISO 4400 IP65
IP65 IP65
SCE238D001/002/004/005 SCE238D006/007/009/010 SCG238C016/017/018
SCE238D003 SCE238D008 SCG238C019/020/021

F A F A F A
B B B
C C C

360° 360°
360°

1 L 1 L
J J
K K L J
K

Availability, design and specifications are subject to change without notice. All rights reserved.
X X

H D H D
E E
M M H D
E
M

prefix catalogue
type A B C D E F H J K L M X weight (2)
option number
SCE238D001/002 60,5 27,5 17 34,5 62 22 43 68,5 81 98 57,5 47 0,4
SCE238D003 60,5 27,5 17 45,5 81,5 22 57 71 83,5 100 73,5 49,5 0,5
01 SC 1 Manual operator location
SCE238D004 60,5 27,5 17 53 95 22 68 79,5 94,5 111 85,5 60,5 0,8
SCE238D005 60,5 27,5 17 58 105,5 22 87 84,5 104 121 93 70 1,0
SCE238D006/007 76 38 23 34,5 62 30 43 69,5 83 100,5 61,5 47 0,5
SCE238D008 76 38 23 45,5 81,5 30 57 72 85,5 103 77,5 49,5 0,6
02 SC
SCE238D009 76 38 23 53 95 30 68 80,5 96,5 114 89,5 60,5 0,9
SCE238D010 76 38 23 58 105,5 30 87 85,5 106 123,5 97 70 1,1
SCG238C016 76 41,5 21,6 63 113 32 81 109(3) 135(3) 150 106 - 1,7
SCG238C017 76 41,5 21,6 80 140 32 110 112(3) 142(3) 157 129 - 2,6
00041GB-2013/R01

SCG238C018 76 41,5 21,6 85 157 32 110 117(3) 153(3) 168 129 - 2,9
03 SC
SCG238C019 76 41,5 21,6 63 113 32 81 127 153 168 106 - 1,9
SCG238C020 76 41,5 21,6 80 140 32 110 130 160 175 129 - 3,0
SCG238C021 76 41,5 21,6 85 157 32 110 135 171 186 129 - 3,4
(2)
Incl. coil(s) and connector(s). (3)
Maintained manual operator: added + 23 mm.

All leaflets are available on: www.asconumatics.eu

V316-2