Subhead-II (Miscellaneous work of Fire Fighting System)

S.No. DSR/MR Description Unit Quantity

Supplying and fixing single headed internal hydrant valve with
instantaneous Gunmetal/Stainless Steel
coupling of 63 mm dia with cast iron wheel ISI marked
conforming to IS 5290 (Type -A) with blank
1 9 Gunmetal/Stainless Steel cap and chain, as required
Including dismantling the Existing Material.

9.1 Single headed Stainless steel each 5

Supplying and fixing Single headed external yard
hydrant valve with 1 No. 63 mm dia instantaneous FM
Gunmetal/Stainless Steel coupling and cast iron wheel,ISI
marked, conforming to IS 5290 (type A) with blank
2 10 Gunmetal/Stainless Steel cap and chain as required :Including
dismantling the Existing Material.

10.2 Single headed Stainless steel each 5

Supplying, fixing, testing and commissioning of butterfly valve
of PN 1.6 rating with bronze/gunmetal seat duly ISI
marked complete with nuts, bolts, washers, gaskets
3 11 conforming to IS 13095 of following sizes as required
:including dismantling the Existing Material

11.4 80 mm dia each 5

Providing, fixing, testing & commissioning of 15mm dia
4 21 quartzoid bulb type sprinklers of rating 68 degree centigrade
with required accessories :

21.1 Pendent Sprinkler each 250

21.2 Upright Sprinkler each 100
21.3 Horizontal side wall sprinkler each 50
21.4 Concealed sprinkler each 10
Providing & fixing of pressure switch in M.S. pipe line
including connection etc. as required,including dismantling
5 22 the Existing Matrial. each 10

Providing & fixing flow switch in following sizes M.S.including

23 connection etc. as required.
23.2 150mm dia each 5
Providing, installation, testing & commissioning ofadjustable
rosette plate for 15mm dia in white finish UL Listed or FM
6 29 approved complete as required. each 50

suply of Orifice plate made of 6 mm. thick stainless steel

withorifice of required size in between flange & landing valve
7 4319 of external and internal hydrant to reduce pressure to working each 5
pressure of 3.5 kg/cm2.

8 4356 supply of Cost of 25mm dia gunmetel gate valve each 20

 Supplying of 63 mm dia, 15 m long RRL hose pipe with 63 mm
dia male and female couplings dulybound with SS Wiring,
Reddish Brown colour, three layered synthetic jacketed,
conforming to IS 636 (type-B) as required.
Working Pressure
9 MR 18kg/cm2, Proof Pressure each 25
25kg/cm2,
Burst Pressure 42kg/cm2
bearing IS: 636-1988 Type-B ISI mark.

10 MR Refilling of Fire Extinguishers at AIIMS Bhopal including

submission of Refilling Valid Test Certificate.

10.1 MR Refilling of CO2 type Fire extinguisher Capacity: 4.5 kg nos. 50

10.2 MR Refilling of Water type Fire extinguisher Capacity: 9 kg. nos. 50
10.3 MR Refilling of Foam type Fire extinguisher,Capacity: 9 kg. nos. 10
10.4 MR Refilling of DCP type Fire extinguisher,Capacity: 5 kg. nos. 20
Grand Total
g System)

Rate Amount

5987 29935

5987 29935

4842 24210

484 121000
484 48400
579 28950
1397 13970

1508 15080

8869 44345

207 10350

802 4010

1350 27000
7899 197475

724 36200
230.38 11519
520 5200
619 12380
659959
10. Rate Analysis for Refilling of Fire Extinguishers at AIIMS Bhopal including Submission of
Refilling Valid Test Certificate.
S.NO. DSR/MR Description Unit Qty Rate GST-18% Total Amount

Refilling of CO2 type

10.1 MR Fire extinguisher Nos. 1 550 99 649
Capacity: 4.5 kg.

Refilling of Water type

10.2 MR Fire extinguisher Nos. 1 175 31.5 206.5
Capacity: 9 kg.

Refilling of Foam type

10.3 MR Fire extinguisher Nos. 1 395 71.1 466.1
Capacity: 9 kg.

Refilling of DCP type

10.4 MR Fire extinguisher, Nos. 1 470 84.6 554.6
Capacity: 5 kg.
9.Rate Analysis for Supplying of 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings du
bound with SS Wiring, Reddish Brown colour, three layered synthetic jacketed, conforming to IS 636 (type-B) as
required.
Working Pressure 18kg/cm2,Proof Pressure 25kg/cm2,Burst Pressure 42kg/cm2.
bearing I
636-1988 Type-B ISI mark.

S.No. DSR/MR Description Unit Quantity Rate GST-18%

Supplying of 63 mm dia, 15 m long RRL hose
pipe with 63 mm dia male and female
couplings dulybound with SS Wiring,
Reddish Brown colour, three layered
synthetic jacketed, conforming to IS 636
(type-B) as required.
9 MR Working Pressure 18kg/cm2. each 1 6000 1080
Proof Pressure 25kg/cm2.
Burst Pressure 42kg/cm2.
bearing IS: 636-1988 Type-B ISI mark.
male and female couplings duly
rming to IS 636 (type-B) as

bearing IS:

Amount

7080
preliminary estimate for supply of shut off nozzle of Brass materials, IS Standard with Clamps to hose reel pipe
of 30m long and 20mm diameter for Medical College,Nursing College,Auditorium, Library.

S.NO. DSR/MR Description Unit Qty Rate

supply of shut off nozzle

made of Gun Metal
Material for hose reel
1 MR each 76 785
pipe of 30m long and
20mm diameter , HSN
Code 8424,

Grand Total
Say Total
s, IS Standard with Clamps to hose reel pipe
ege,Auditorium, Library.

Total Amount

59660

59660
59660
 supply of shut off nozzle, Brass Material IS standard for hose reel pipe of 30m long and 20
1
diameter for Medical College,Nursing College,Auditorium Library in AIIMS Bhopal

S NO. DESCRIPTION RATE (Rs. P.) UNIT QUANTITY

A MATERIALS

supply of shut off nozzle of Brass

1
Material IS standard for hose reel 592.55 Nos 1
pipe of 30m long and 20mm
diameter .

Total of materials A1
Cartage @ 1% of A1
Total of A
B Add GST@ 12% (MF 0.1405)
Total B
Total A+B
C OVERHEADS & PROFIT @ 15%
OF (A+B)
Total C
TOTAL (A+B+C)
RATE PER JOB
Say Rs.
reel pipe of 30m long and 20mm
ry in AIIMS Bhopal

QUANTITY AMOUNT (Rs. P.)

1 592.55

592.55
5.93
598.48

84.09
84.09
682.56

102.38
102.38
784.95
784.95
785.00
 Analysis Of Rate
9.Rate Analysis for Supplying of 63 mm dia, 15 m long RRL hose pipe with 63
mm dia male and female couplings duly bound with SS Wiring, Reddish
Brown colour, three layered synthetic jacketed, conforming to IS 636 (type-B)
1 as required.
Working Pressure
18kg/cm2,Proof Pressure 25kg/cm2,Burst Pressure 42kg/cm2.

bearing IS:
636-1988Description
Type-B ISI mark. Unit Qty Rate Amount (Rs.)

MATERIALS
Supplying of 63 mm dia, 15 m
long RRL hose pipe with 63 mm
dia male and female couplings
dulybound with SS Wiring,
Reddish Brown colour, three
layered synthetic jacketed,
conforming to IS 636 (type-B) as
required.
Working Pressure
18kg/cm2. Proof No. 1.00 6000.00 6000.00
Pressure 25kg/cm2.
Burst Pressure 42kg/cm2.
bearing IS: 636-
1988 Type-B ISI mark.

Total cost of materials 6000.00

Cartage @ 1 % of A1 60.00
TOTAL 6060.00
OVERHEADS &
909.00
PROFIT @ 15 %
TOTAL 6969.00
GST Extra by adding
979.14
Multiplying Factor @0.1405
Total 7948.14
LWC 1 % 79.48
Total 8027.63
Say 8028.00