Adaptor

PipeValves
Fittings
Fittings

ENGINEERS
163/C, Oshiwara Industrial Centre, Link Road,
Goregaon (W), Mumbai-400104. INDIA
Tel : +91-22-2876 6982 / 56903564 / 55727627
Fax : +91-22-28766998
Email : sales@tubefiteng.com / tubefit@vsnl.com
Website : www.tubefiteng.com
 ENGINEERS

NEEDLE VALVE

BAR STOCK NEEDLE VALVE - (Model - BSNV)

11
10
BONNE T PUSHER 9
(S ilver P lat ed f or 3
Ant i Galli ng/ Free zing)
8
BONNET
(Back Sea ted Blowout P roof) 2
6
S PINDLE
( Ground & Thre ad Rolle d) 5
4
SP INDLE TIP - Non Rot ating T ip
( S hut Of f Ty pe - Sta nda rd / 7
Regulat ing or So ft S eat ) 1

S.NO. DESCRIPTION QTY. MATERIAL

1 BODY 1 SS 316
2 BONNET 1 SS 316
3 BONNET PUSHER 1 SS 316
4 STEM 1 SS 316
5 WASHER 1 SS 316
6 PACKING 1 PTFE
7 BONNET SEAL 1 PTFE
8 CHECK NUT 1 SS 316
9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
FEATURES
11 HANDLE 1 SS 304
- BAR STOCK NEEDLE VALVE
- Screwed bonnet design.
- Bonnet : Back seated blow out proof.
- Spindle : Ground and thread rolled. - Panel mounting on request.
- Spindle tip : Non rotating tip shut-off type-Stellited, - All valves are 100% Factory tested prior to shipment.
Regulating-Stellited and soft seated
- Bonnet pusher : Silver plated for anti-galling freezing for - APPLICATION
increased stem cycle life. - Refineries, liquid patroleum gas processing plant,
- Dust cap protects stem threads from external contamination. petro-chemical plants, systems difficult to
- Leak tight seal with low operating torque. shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability
- TESTING
- TECHNICAL SPECIFICATIONS - Pneumatic Seat test is performed at 1/4 of working
- Size : 1/8" to 1" pressure.
- End Connection : NPT, BSPT, Socket weld, - Hydrostatic shell test is performed at 1.5 times the
Butt weld, Tube fitting. working pressure.
- Pattern : Straight,angle and cross. - Optional test are available upon request.
- Working pressure : 6000 Psi (413Bar)
- Temperature Rating : PTFE 450 Deg F (232 Deg C) - LUBRICATION
Grafoil 700 Deg F (371 Deg C) - Dye molly sulphide.
- Material of construction : SS 316, SS 304, CS, F11
Hastelloy, Monel
- Optional Sour Gas service valves are available
confirming to NACE Std. MR - 01 - 75
- Stem packing : PTFE, Grafoil.
- Orifice : Dia 4.7
 ENGINEERS

NEEDLE VALVE

FORGED NEEDLE VALVE - (Model - FNV)

11
10
9
BONNET PUSHER 6
(Silver Plated for 4
Anti Galling/ Freezi ng)
8
2
5
SPINDLE
(Ground & Thread Rolled) 7
3
SPINDLE TIP - Non Rotating Tip
1
( Shut Off Type - Standard /
Regula ting or Soft Seat )

S.NO. DESCRIPTION QTY. MATERIAL

1 BODY 1 SS 316
2 BONNET PUSHER 1 SS 316
3 STEM 1 SS 316
4 GLAND 1 SS 316
5 BODY NU T 1 SS 316
6 GLAND NU T 1 SS 316
7 GASKET 1 PTFE
8 PACKING 1 PTFE
9 DUST CAP 1 LDPE
FEATURES 10 GRUB SCREW 1 CS
- FORGED NEEDLE VALVE 11 HANDLE 1 SS 304
- Integral bonnet design.
- Bonnet : Back seated blow out proof.
- Packing nut design permits packing adjustment in open
- Orifice : Dia 4.7
or close position.
- Panel mounting on request.
- Spindle : Ground and thread rolled.
- All valves are 100% Factory tested prior to shipment.
- Spindle tip : Non rotating tip shut-off type-Stellited,
Regulating-Stellited and soft seated
- APPLICATION
- Bonnet pusher : Silver plated for anti-galling freezing for
- Refineries, liquid patroleum gas processing plant,
increased stem cycle life.
petro-chemical plants, systems difficult to
- Leak tight seal with low operating torque.
shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability

- TESTING
- TECHNICAL SPECIFICATIONS
- Pneumatic Seat test is performed at 1/4 of working
- Size : 1/8" to 1"
pressure.
- End Connection : NPT, BSPT, Socket weld,
- Hydrostatic shell test is performed at 1.5 times the
Butt weld, Tube fitting.
working pressure.
- Pattern : Straight
- Optional test are available upon request.
- Working pressure : 6000 Psi (413Bar)
- Temperature Rating : PTFE 450 Deg F (232 Deg C)
- LUBRICATION
Grafoil 700 Deg F (371 Deg C)
- Dye molly sulphide.
- Material of construction : SS 316, SS 304, CS, F11
- Optional Sour Gas service valves are available
confirming to NACE Std. MR - 01 - 75
- Stem packing : PTFE, Grafoil.
 ENGINEERS

NEEDLE VALVE

HIGH PRESSURE NEEDLE VALVE - (Model - HPNV)

14
13
2
15
11
10
4
BONNE T
5
(Ba ck S eated Blowo ut Proof)
8
SPINDLE
9
(Ground & Thread Rolled)
6
S PINDLE TIP - Non Rotating Tip
7
( Shut Of f Type - Standard /
Regulating or S oft Se at ) 12
3
1

S.NO. DE SCRIPTION QTY. MATERIAL

1 BODY 1 SS 316
2 STEM 1 SS 316
3 BALL TIP 1 SS 316
(Chrome plated)
4 BONNET 1 SS 316
5 PANEL NUT 1 SS 316
6 PACKING SUPPORT 2 GLASS FILLED PTFE
FEATURES 7 PACKING 4 PTFE/GRAFOIL
- HIGH PRESSURE NEEDLE VALVE 8 GLAND BUSH 1 SS 316

- Union bonnet design. 9 UNION NUT 1 SS 316

- Packing bolt design permits packing adjustment in open or 10 LOCK NUT 1 SS 316
11 PACKING BOLT 1 SS 416 -
close position.
NICKEL CADMIUM PLATED
- Union bonnet design prevents accidential valve disassembly. 12 BONNET SEAL 1 PTFE
- Union bonnet : Back seated blow out proof. 13 GRUB SCREW 1 SS
- Spindle : Ground and thread rolled. 14 HANDLE 1 SS 304
- Spindle tip : Non rotating tip shut-off type-Stellited, 15 DUST CAP 1 LDPE
Regulating-Stellited and soft seated
- Packing bolt : Silver plated for anti-galling freezing for
increased stem cycle life. - Orifice : Dia 4.7
- Dust cap protects stem threads from external contamination. - Panel mounting on body bonnet.
- Leak tight seal with low operating torque. - All valves are 100% Factory tested prior to shipment.
- Heat code traceability
- APPLICATION
- TECHNICAL SPECIFICATIONS - Refineries, liquid patroleum gas processing plant,
- Size : 1/8" to 1" petro-chemical plants, systems difficult to
- End Connection : NPT, BSPT, Socket weld, shur off due to solid contents dust, rust, dirt etc.
Butt weld, Tube fitting.
- Pattern : Straight - TESTING
- Working pressure : 10,000 Psi (700 Bar) - Pneumatic Seat test is performed at 1/4 of working
- Temperature Rating : PTFE 450 Deg F (232 Deg C) pressure.
Grafoil 700 Deg F (371 Deg C) - Hydrostatic shell test is performed at 1.5 times the
- Material of construction : SS 316, SS 304, CS, F11, working pressure.
Hastelloy, Monel. - Optional test are available upon request.
- Optional Sour Gas service valves are available
confirming to NACE Std. MR - 01 - 75 - LUBRICATION
- Stem packing : PTFE, Grafoil. - Dye molly sulphide.
 ENGINEERS
NEEDLE VALVE

BRASS NEEDLE VALVE - (Model - BNV)

15
11
10
4
SPINDLE 5
(Ground & T hread Rolled)
8
S PINDLE TIP - Rotating Tip 9
( Shut Off Type - Standard /
Reg ulatin g o r Soft Seat ) 6

S.NO. DESCRIPTION QTY. MATERIAL

1 BODY 1 BRAS S (IS - 319)
2 STEM 1 SS 316
3 WASHER 1 SS 316
4 PACKING 1 PTFE
5 GLAND 1 SS 316
6 GLAND NUT 1 BRASS
7 GRUB SCREW 1 SS
8 HANDLE 1 SS 304
FEATURES
- BRASS NEEDLE VALVE
- Integral bonnet design. - APPLICATION
- Spindle : Ground and thread rolled. - Refineries, liquid patroleum gas processing plant,
- Spindle tip : Non rotating tip shut-off type-Stellited, petro-chemical plants, systems difficult to
Regulating-Stellited and soft seated shur off due to solid contents dust, rust, dirt etc.
- Leak tight seal with low operating torque.
- Heat code traceability
- TESTING
- Pneumatic Seat test is performed at 1/4 of working
- TECHNICAL SPECIFICATIONS pressure.
- Size : 1/8" to 1" - Hydrostatic shell test is performed at 1.5 times the
- End Connection : NPT, BSPT, Socket weld, working pressure.
Butt weld, Tube fitting. - Optional test are available upon request.
- Pattern : Straight
- Working pressure : 3000 Psi (200 Bar) - LUBRICATION
- Temperature Rating : PTFE 450 Deg F (232 Deg C) - Dye molly sulphide.
Grafoil 700 Deg F (371 Deg C)
- Material of construction : Brass
- Optional Sour Gas service valves are available
confirming to NACE Std. MR - 01 - 75
- Stem packing : PTFE
- Orifice : Dia 4.7
- Panel mounting on body bonnet.
- All valves are 100% Factory tested prior to shipment.
 ENGINEERS

GAUGE VALVE

GAUGE SCREWED BONNET NEEDLE VALVE (Model-GSNV1)

11
10

BONNET PUSHER 9
(Silver Plated for 3
Anti Galling/ Freezing)
8
BONNET
2
(Back Seated Blowout Proof)
6
SPINDLE 5
(Ground & Thread Rolled)
4
SPINDLE TIP - Non Rotati ng Tip 7
( Shut Off Type - Standard /
Regulating or Soft Seat ) 1

S.NO. DESCRIPTION QTY. MATERIAL

1 BODY 1 SS 316
2 BONNET 1 SS 316
3 BONNET PUSHER 1 SS 316
4 STEM 1 SS 316
5 WASHER 1 SS 316
6 PACKING 1 PTFE
7 BONNET SEAL 1 PTFE
8 CHECK NUT 1 SS 316
9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
FEATURES
11 HANDLE 1 SS 304
- GAUGE SCREWED BONNET NEEDLE VALVE
- Screwed bonnet design.
- Bonnet : Back seated blow out proof.
- Spindle : Ground and thread rolled.
- Panel mounting on request.
- Spindle tip : Non rotating tip shut-off type-Stellited,
- All valves are 100% Factory tested prior to shipment.
Regulating-Stellited and soft seated
- Bonnet pusher : Silver plated for anti-galling freezing for
- APPLICATION
increased stem cycle life.
- Pressure switches, gauges & differential pressure
- Dust cap protects stem threads from external contamination.
pressure transmeters suitable for block & bleed
- Leak tight seal with low operating torque.
assemblies to test pressure source required in
- Heat code traceability
sampling line or plug valve.
- Refineries, liquid petroleum gas processing plant,
- TECHNICAL SPECIFICATIONS
petro-chemical plants, systems difficult to shut of
- Size : 1/2"F x 1/2"F
due to solid contents dust, rust, dirt etc.
1/2"M x 1/2"F
3/4"M x 1/2"F
- TESTING
3/4"F x 3/4"F
- Pneumatic Seat test is performed at 1/4 of working
- End Connection : NPT, BSPT, BSP
pressure.
- Working pressure : 6000 Psi (413Bar)
- Hydrostatic shell test is performed at 1.5 times the
- Temperature Rating : PTFE 450 Deg F (232 Deg C)
working pressure.
Grafoil 700 Deg F (371 Deg C)
- Optional test are available upon request.
- Material of construction : SS 316, SS 304, CS, F11
Hastelloy, Monel
- LUBRICATION
- Optional Sour Gas service valves are available
- Dye molly sulphide.
confirming to NACE Std. MR - 01 - 75
- Stem packing : PTFE, Grafoil.
- Orifice : Dia 4.7
 ENGINEERS

GAUGE VALVE

GAUGE SCREWED BONNET NEEDLE VALVE (Model-GSNV2)

WITH BLEED PLUG (STRAIGHT & ANGLE PATTERN)

11
10

BONNET PUSHER 9
(Silver Plated for 3
Anti Galling/ Freezing)
8
BONNET
2
(Back Seated Blow out Proof)
6
SPIND LE
5
(Ground & Thread Rolled)
4
SPINDLE TI P - Non Rotating T ip
7
( Shut Off Type - St andard /
Regulating or So ft Seat ) 1
12

S.NO. DESCRIPTION QTY. MATERIAL

1 BODY 1 SS 316
2 BONNET 1 SS 316
3 BONNET PUSHER 1 SS 316
4 STEM 1 SS 316
5 WASHER 1 SS 316
6 PACKING 1 PTFE
7 BONNET SEAL 1 PTFE
8 CHECK NUT 1 SS 316
9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
11 HANDLE 1 SS 304
12 BLEED PLUG 1 SS 316
FEATURES
- GAUGE SCREWED BONNET NEEDLE VALVE
- Screwed bonnet design.
- Bonnet : Back seated blow out proof.
- Spindle : Ground and thread rolled.
- Panel mounting on request.
- Spindle tip : Non rotating tip shut-off type-Stellited,
- All valves are 100% Factory tested prior to shipment.
Regulating-Stellited and soft seated
- Bonnet pusher : Silver plated for anti-galling freezing for
- APPLICATION
increased stem cycle life.
- Pressure switches, gauges & differential pressure
- Dust cap protects stem threads from external contamination.
pressure transmeters suitable for block & bleed
- Leak tight seal with low operating torque.
assemblies to test pressure source required in
- Heat code traceability
sampling line or plug valve.
- Refineries, liquid petroleum gas processing plant,
- TECHNICAL SPECIFICATIONS
petro-chemical plants, systems difficult to shut of
- Size : 1/2"F x 1/2"F
due to solid contents dust, rust, dirt etc.
1/2"M x 1/2"F
3/4"M x 1/2"F
- TESTING
3/4"F x 3/4"F
- Pneumatic Seat test is performed at 1/4 of working
- End Connection : NPT, BSPT, BSP
pressure.
- Working pressure : 6000 Psi (413Bar)
- Hydrostatic shell test is performed at 1.5 times the
- Temperature Rating : PTFE 450 Deg F (232 Deg C)
working pressure.
Grafoil 700 Deg F (371 Deg C)
- Optional test are available upon request.
- Material of construction : SS 316, SS 304, CS, F11
Hastelloy, Monel
- LUBRICATION
- Optional Sour Gas service valves are available
- Dye molly sulphide.
confirming to NACE Std. MR - 01 - 75
- Stem packing : PTFE, Grafoil.
- Orifice : Dia 4.7
 ENGINEERS
GAUGE VALVE

GAUGE ROOT SCREWED BONNET NEEDLE VALVE (Model-GRSNV1)

WITH ONE SIDE DRAIN & SECOND SIDE CALIBRATION

11
10
BONNET PUSHER 9
(S ilver Plated for 3
Anti Galling/ Freezing)
8
BONNET 2
(Back Seated Blowout Proof)
6
SPINDLE
5
(Ground & Thread Rolled)
4
SPINDLE TIP - Non Rotating Tip 7
( Shut Off Type - S tandard /
Regulating or Soft Seat ) 1

S.NO. DESCRIPTION QTY. MATERIAL

1 BODY 1 SS 316
2 BONNET 1 SS 316
3 BONNET PUSHER 1 SS 316
4 STEM 1 SS 316
5 WASHER 1 SS 316
6 PACKING 1 PTFE
7 BONNET SEAL 1 PTFE
8 CHECK NUT 1 SS 316
9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
11 HANDLE 1 SS 304
FEATURES
- GAUGE ROOT SCREWED BONNET NEEDLE VALVE
- Screwed bonnet design.
- Bonnet : Back seated blow out proof.
- Spindle : Ground and thread rolled.
- Spindle tip : Non rotating tip shut-off type-Stellited, - Panel mounting on request.
Regulating-Stellited and soft seated - All valves are 100% Factory tested prior to shipment.
- Bonnet pusher : Silver plated for anti-galling freezing for
increased stem cycle life. - APPLICATION
- Dust cap protects stem threads from external contamination. - Pressure switches, gauges & differential pressure
- Leak tight seal with low operating torque. pressure transmeters suitable for block & bleed
- Heat code traceability assemblies to test pressure source required in
sampling line or plug valve.
- TECHNICAL SPECIFICATIONS - Refineries, liquid petroleum gas processing plant,
- Size : 1/2"F x 1/2"F petro-chemical plants, systems difficult to shut of
1/2"M x 1/2"F due to solid contents dust, rust, dirt etc.
3/4"M x 1/2"F
3/4"F x 3/4"F - TESTING
- End Connection : NPT, BSPT, BSP - Pneumatic Seat test is performed at 1/4 of working
- Working pressure : 6000 Psi (413Bar) pressure.
- Temperature Rating : PTFE 450 Deg F (232 Deg C) - Hydrostatic shell test is performed at 1.5 times the
Grafoil 700 Deg F (371 Deg C) working pressure.
- Material of construction : SS 316, SS 304, CS, F11 - Optional test are available upon request.
Hastelloy, Monel
- Optional Sour Gas service valves are available - LUBRICATION
confirming to NACE Std. MR - 01 - 75 - Dye molly sulphide.
- Stem packing : PTFE, Grafoil.
- Orifice : Dia 4.7
 ENGINEERS

GAUGE VALVE

GAUGE ROOT SCREWED BONNET NEEDLE VALVE (Model-GRSNV2)

WITH BLEED PLUG & HEX HEAD BLEED VALVE

11
10

BONNET PUSHER 9
(Silver Plated for 3
Anti Galling/ Freezing)
8
BONNET
2
(Back Seated Blowout Proof)
6
SPINDLE
5
(Ground & Thread Rolled)
4
SPINDLE TIP - Non Rotating Ti p 7
( Shut Off Type - Standard /
Reg ulating or Soft Seat ) 1
12
13

S.N O. D ESCRIPTI ON QTY. MATERIAL

1 B ODY 1 SS 316

2 B ONNET 1 SS 316
3 BONNET PUSHER 1 SS 316

4 ST EM 1 SS 316

5 WASHER 1 SS 316
6 PACKING 1 PT FE
7 BONNET SEAL 1 PT FE
8 C HECK NUT 1 SS 316

9 DU ST CA P 1 LDPE

10 GRUB SCREW 1 CS

11 HA NDLE 1 SS 304

12 BLEED PLUG 1 SS 316

13 HEX HEA D BLEED VAL VE 1 SS 316
FEATURES
- GAUGE ROOT SCREWED BONNET NEEDLE VALVE
- Screwed bonnet design.
- Bonnet : Back seated blow out proof. - Panel mounting on request.
- Spindle : Ground and thread rolled. - All valves are 100% Factory tested prior to shipment.
- Spindle tip : Non rotating tip shut-off type-Stellited,
Regulating-Stellited and soft seated - APPLICATION
- Bonnet pusher : Silver plated for anti-galling freezing for - Pressure switches, gauges & differential pressure
increased stem cycle life. pressure transmeters suitable for block & bleed
- Dust cap protects stem threads from external contamination. assemblies to test pressure source required in
- Leak tight seal with low operating torque. sampling line or plug valve.
- Heat code traceability - Refineries, liquid petroleum gas processing plant,
petro-chemical plants, systems difficult to shut of
- TECHNICAL SPECIFICATIONS due to solid contents dust, rust, dirt etc.
- Size : 1/2"F x 1/2"F
1/2"M x 1/2"F - TESTING
3/4"M x 1/2"F - Pneumatic Seat test is performed at 1/4 of working
3/4"F x 3/4"F pressure.
- End Connection : NPT, BSPT, BSP - Hydrostatic shell test is performed at 1.5 times the
- Working pressure : 6000 Psi (413Bar) working pressure.
- Temperature Rating : PTFE 450 Deg F (232 Deg C) - Optional test are available upon request.
Grafoil 700 Deg F (371 Deg C)
- Material of construction : SS 316, SS 304, CS, F11 - LUBRICATION
Hastelloy, Monel - Dye molly sulphide.
- Optional Sour Gas service valves are available
confirming to NACE Std. MR - 01 - 75
- Stem packing : PTFE, Grafoil.
- Orifice : Dia 4.7
 ENGINEERS

MANIFOLD VALVE

2 VALVE MANIFOLD (Model-2VMS)

2 VALVE MANIFOLD - STRAIGHT TYPE (PIPE TO PIPE CONN.)

11
S.NO. DESCRIPTION QTY. MATERIAL
10
1 B ODY 1 SS 316
BONNET PUSHER 9
(Silver Plated for 2 BONNET 1 SS 316
3
Anti Galling/ Freezing) 3 BONNET PUSHER 1 SS 316
8
BONNET 4 STEM 1 SS 316
(Back Seated Blowout Proof) 2
6 5 WASHER 1 SS 316
SPINDLE 6 PACKING 1 PTFE
(Ground & Thread Rolled) 5
4 7 BON NET SEA L 1 PTFE
SPINDLE TIP - Non Rotating Tip 8 CHECK NUT 1 SS 316
7
( Shut Off Type - Standard /
Regulating or Soft Seat ) 1 9 DUST C AP 1 LDPE
10 GRUB SCREW 1 CS
BONNET DETAIL 11 HANDL E 1 SS 304

FEATURES
- 2 VALVE MANIFOLD - STRAIGHT TYPE - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
- 2 valve manifolds are designed Grafoil 700 Deg. F (371 Deg. C)
for remote or separate mounting. Connecting - Material of construction : SS 316, SS 304, Monel,C.S.
from process side 1/2" NPT(F) and - Optional Sour Gas service valves are available
Instrument side 1/2" NPT(F) Connecting confirming to NACE Std. MR - 01 - 75
system impulse lines and transmitters, - Stem packing : PTFE, Grafoil.
having simple two valves configuration - Orifice : Dia. 4.7
which allows for easy block or Isolate, - All valves are 100% Factory tested prior to
Bleed or Vent valve calibration of a static shipment.
pressure transmitter or gauge.
- Bleed/vent connection with s.s. plug - APPLICATION
will be provided on request. - Refineries, liquid patroleum gas processing plant,
- Approximate weight : 0.95 Kg (2.1 Lbs.). petro-chemical plants, systems difficult to
- Heat code traceability shur off due to solid contents dust, rust, dirt etc.

- BONNET ASSEMBLY - MANIFOLD SELECTION INFORMATION DATA

- Screwed bonnet design. - Pressure & temperature ratings are selected
- Bonnet-back seated blow out proof. from ANSI B 16.34 for standard class 2500
- Spindle - Ground and thread rolled.
- Spindle tip-Non rotating tip shut off type - TESTING
- stellited, Regulating-stellited and soft seated. - Pneumatic Seat test is performed at 1/4 of working
- Bonnet pusher - silver plated for anti galling pressure.
freezing for increased stem cycle life. - Hydrostatic shell test is performed at 1.5 times the
- Dust cap protects stem threads from working pressure.
externals contamination. - Optional test are available upon request.
- Leak tight seal with low operating torque.
- LUBRICATION
- TECHNICAL SPECFICATIONS - Dye molly sulphide
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
- Working Pressure : 6000 Psi (413 Bar)
 ENGINEERS

MANIFOLD VALVE

2 VALVE MANIFOLD (Model-2VMT)

2 VALVE MANIFOLD - TEE TYPE (PIPE TO FLANGE CONN.)

11 QTY. MATERIAL
S.NO. DESCRIPTION
10
1 BODY 1 SS 316
BONNET PUSHER 9
2 BONNET 1 SS 316
(Silver Plated for 3
Anti Galling/ Freezing) 3 BONNET PUSHER 1 SS 316
8
BONNET 4 STEM 1 SS 316
(Back Seated Blowout Proof) 2
5 WASHER 1 SS 316
6
SPINDLE 6 PACK ING 1 PTFE
(Ground & Thread Rolled) 5
4 7 BONNET SEA L 1 PTFE
SPINDLE TIP - Non Rotating Tip 8 CHECK NUT 1 SS 316
7
( Shut Off Type - Standard /
Regulating or Soft Seat ) 1 9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
BONNET DET AIL 11 HANDLE 1 SS 304

FEATURES
- 2 VALVE MANIFOLD - TEE TYPE - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
- 2 Way valve manifolds are designed Grafoil 700 Deg. F (371 Deg. C)
for direct mounting. Connecting - Material of construction : SS 316, SS 304, Monel,C.S.
from process side 1/2" NPT(F) and - Optional Sour Gas service valves are available
Instrument side flange connection on confirming to NACE Std. MR - 01 - 75
suitable for DP Transmitter. Connecting - Stem packing : PTFE, Grafoil.
system impulse lines and transmitters, - Orifice : Dia. 4.7
having simple two valves configuration - All valves are 100% Factory tested prior to
which allows for easy block or Isolate, shipment.
Bleed or Vent valve calibration of a static
pressure transmitter or gauge. - APPLICATION
- Bleed/vent connection with s.s. plug - Refineries, liquid patroleum gas processing plant,
will be provided on request. petro-chemical plants, systems difficult to
- Approximate weight : 1.00 Kg (2.2 Lbs.). shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability
- MANIFOLD SELECTION INFORMATION DATA
- BONNET ASSEMBLY - Pressure & temperature ratings are selected
- Screwed bonnet design. from ANSI B 16.34 for standard class 2500
- Bonnet-back seated blow out proof.
- Spindle - Ground and thread rolled. - TESTING
- Spindle tip-Non rotating tip shut off type - Pneumatic Seat test is performed at 1/4 of working
-stellited, Regulating-stellited and soft seated. pressure.
- Bonnet pusher - silver plated for anti galling - Hydrostatic shell test is performed at 1.5 times the
freezing for increased stem cycle life. working pressure.
- Dust cap protects stem threads from - Optional test are available upon request.
externals contamination.
- Leak tight seal with low operating torque. - LUBRICATION
- Dye molly sulphide
- TECHNICAL SPECIFICATIONS
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
- Working Pressure : 6000 Psi (413 Bar)
 ENGINEERS

MANIFOLD VALVE

2 VALVE MANIFOLD -(Model-2VMH)

2 VALVE MANIFOLD - H - TYPE (FLANGE TO FLANGE CONN.)

11
S.NO. DESCRIPTION QTY. MATERIAL
10
1 B ODY 1 SS 316
BONNET PUSHER 9
(Silver Plated for 2 BONNET 1 SS 316
3
Anti Galling/ Freezing) 3 BONNET PUSHER 1 SS 316
8
BONNET 4 STEM 1 SS 316
2
(Back Seated Blowout Proof)
5 WASHER 1 SS 316
6
SPINDLE 6 PACKING 1 PTFE
(Ground & Thread Rolled) 5
7 BONNET SEAL 1 PTFE
4
SPINDLE TIP - Non Rotating Tip 8 CHECK NUT 1 SS 316
7
( Shut Off Type - Standard /
Regulating or Soft Seat ) 1 9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
BONNET DETAIL 11 HANDLE 1 SS 304

FEATURES
- TWO VALVE MANIFOLD - `H' TYPE - Working Pressure : 6000 Psi (413 Bar)
- 2 Way valve manifolds are designed - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
for direct mounting. Connecting Grafoil 700 Deg. F (371 Deg. C)
from process Flange connection on - Material of construction : SS 316, SS 304, Monel,C.S.
suitable for process. Instrument side - Optional Sour Gas service valves are available
flange connection on suitable for DP confirming to NACE Std. MR - 01 - 75
Transmitter. Connecting system impulse - Stem packing : PTFE, Grafoil.
lines and transmitters, having simple two - Orifice : Dia. 4.7
valves configuration which aloows for - All valves are 100% Factory tested prior to
easy Block or Isolate, Bleed or Vent valve shipment.
calibration of a static pressure transmitter
or gauge. - APPLICATION
- Bleed/vent connection with s.s. plug - Refineries, liquid patroleum gas processing plant,
will be provided on request. petro-chemical plants, systems difficult to
- Approximate weight : 1.00 Kg (2.2 Lbs.). shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability
- MANIFOLD SELECTION INFORMATION DATA
- BONNET ASSEMBLY - Pressure & temperature ratings are selected
- Screwed bonnet design. from ANSI B 16.34 for standard class 2500
- Bonnet-back seated blow out proof.
- Spindle - Ground and thread rolled. - TESTING
- Spindle tip-Non rotating tip shut off type - Pneumatic Seat test is performed at 1/4 of working
-stellited, Regulating-stellited and soft seated. pressure.
- Bonnet pusher - silver plated for anti galling - Hydrostatic shell test is performed at 1.5 times the
freezing for increased stem cycle life. working pressure.
- Dust cap protects stem threads from - Optional test are available upon request.
externals contamination.
- Leak tight seal with low operating torque. - LUBRICATION
- Dye molly sulphide
- TECHANICAL SPECIFICATIONS
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
 ENGINEERS

MANIFOLD VALVE

3 VALVE MANIFOLD -(Model-3VMS)

3 VALVE MANIFOLD - SEPERATE TYPE (PIPE TO PIPE CONN.)

11
S.NO. DESCRIPTION QTY. MAT ERIAL
10
1 BODY 1 SS 316
BONNET PUSHER 9
(Silver Plated for 2 BONNET 1 SS 316
3
Anti Galling/ Freezing) 3 BONNET PUSH ER 1 SS 316
8
BONNET 4 STEM 1 SS 316
(Back Seated Blowout Proof) 2
5 WASH ER 1 SS 316
6
SPINDLE 6 PACK ING 1 PTFE
5
(Ground & Thread Rolled)
4 7 BONNET SEAL 1 PTFE
SPINDLE TIP - Non Rotating Tip 8 CHECK NUT 1 SS 316
7
( Shut Off Type - Standard /
Regulating or Soft Seat ) 1 9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
BONNET DETAIL 11 HANDLE 1 SS 304

FEATURES
- 3 VALVE MANIFOLD - SEPARATE TYPE - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
- 3 Way valve manifolds are designed Grafoil 700 Deg. F (371 Deg. C)
for remote or separate mounting. Connecting - Material of construction : SS 316, SS 304, Monel,C.S.
from process side 1/2" NPT(F) and - Optional Sour Gas service valves are available
Instrument side 1/2" NPT(F) Connecting confirming to NACE Std. MR - 01 - 75
system impulse lines and transmitters, - Stem packing : PTFE, Grafoil.
having simplethree valves configuration - Orifice : Dia. 4.7
which allows for easy two block or Isolate, - All valves are 100% Factory tested prior to
one Equaliser valve calibration of a static shipment.
pressure transmitter or gauge.
- Bleed/vent connection with s.s. plug - APPLICATION
will be provided on request. - Refineries, liquid patroleum gas processing plant,
- Approximate weight : 1.95 Kg (4.2 Lbs.). petro-chemical plants, systems difficult to
- Heat code traceability shur off due to solid contents dust, rust, dirt etc.

- BONNET ASSEMBLY - MANIFOLD SELECTION INFORMATION DATA

- Screwed bonnet design. - Pressure & temperature ratings are selected
- Bonnet-back seated blow out proof. from ANSI B 16.34 for standard class 2500
- Spindle - Ground and thread rolled.
- Spindle tip-Non rotating tip shut off type - TESTING
-stellited, Regulating-stellited and soft seated. - Pneumatic Seat test is performed at 1/4 of working
- Bonnet pusher - silver plated for anti galling pressure.
freezing for increased stem cycle life. - Hydrostatic shell test is performed at 1.5 times the
- Dust cap protects stem threads from working pressure.
externals contamination. - Optional test are available upon request.
- Leak tight seal with low operating torque.
- LUBRICATION
- TECHANICAL SPECIFICATIONS - Dye molly sulphide
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
- Working Pressure : 6000 Psi (413 Bar)
 ENGINEERS

MANIFOLD VALVE

3 VALVE MANIFOLD -(Model-3VMT)

3 VALVE MANIFOLD - TEE TYPE (PIPE TO FLANGE CONN.)

11
S.NO. DESCRIPTION QTY. MAT ERIAL
10
1 BODY 1 SS 316
BONNET PUSHER 9
(Silver Plated for 2 BONNET 1 SS 316
3
Anti Galling/ Freezing) 1 SS 316
3 BONNET PUSH ER
8
BONNET 4 STEM 1 SS 316
(Back Seated Blowout Proof) 2
6 5 WASH ER 1 SS 316
SPINDLE 6 PACK ING 1 PTFE
(Ground & Thread Rolled) 5
4 7 BONNET SEAL 1 PTFE
SPINDLE TIP - Non Rotating Tip 8 CHECK NUT 1 SS 316
( Shut Off Type - Standard / 7
Regulating or Soft Seat ) 1 9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
BONNET DETAIL 11 HANDLE 1 SS 304

FEATURES
- 3 VALVE MANIFOLD - TEE TYPE - Working Pressure : 6000 Psi (413 Bar)
- 3 Way valve manifolds are designed - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
for direct mounting. Connecting Grafoil 700 Deg. F (371 Deg. C)
from process side 1/2" NPT(F) and - Material of construction : SS 316, SS 304, Monel,C.S.
Instrument side flange connection on - Optional Sour Gas service valves are available
suitable for DP Transmitter. Connecting confirming to NACE Std. MR - 01 - 75
system impulse lines and transmitters, - Stem packing : PTFE, Grafoil.
having simple three valves configuration - Orifice : Dia. 4.7
which allows for easy two block or Isolate, - All valves are 100% Factory tested prior to
one Equaliser valve calibration of a static shipment.
pressure transmitter or gauge.
- Bleed/vent connection with s.s. plug - APPLICATION
will be provided on request. - Refineries, liquid patroleum gas processing plant,
- Approximate weight : 1.00 Kg (2.2 Lbs.). petro-chemical plants, systems difficult to
- Heat code traceability shur off due to solid contents dust, rust, dirt etc.

- BONNET ASSEMBLY - MANIFOLD SELECTION INFORMATION DATA

- Screwed bonnet design. - Pressure & temperature ratings are selected
- Bonnet-back seated blow out proof. from ANSI B 16.34 for standard class 2500
- Spindle - Ground and thread rolled.
- Spindle tip-Non rotating tip shut off type - TESTING
-stellited, Regulating-stellited and soft seated. - Pneumatic Seat test is performed at 1/4 of working
- Bonnet pusher - silver plated for anti galling pressure.
freezing for increased stem cycle life. - Hydrostatic shell test is performed at 1.5 times the
- Dust cap protects stem threads from working pressure.
externals contamination. - Optional test are available upon request.
- Leak tight seal with low operating torque.
- LUBRICATION
- TECHNICAL SPECIFICATIONS - Dye molly sulphide
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
 ENGINEERS

MANIFOLD VALVE

3 VALVE MANIFOLD -(Model-3VMH)

3 VALVE MANIFOLD - H - TYPE (FLANGE TO FLANGE CONN.)

11
S.NO. DESCRIPTION QTY. MAT ERIAL
10
1 BODY 1 SS 316
BONNET PUSHER 9
(Silver Plated for 2 BONNET 1 SS 316
3
Anti Galling/ Freezing) 1 SS 316
3 BONNET PUSH ER
8
BONNET 4 STEM 1 SS 316
(Back Seated Blowout Proof) 2
6 5 WASH ER 1 SS 316
SPINDLE 6 PACK ING 1 PTFE
(Ground & Thread Rolled) 5
4 7 BONNET SEAL 1 PTFE
SPINDLE TIP - Non Rotating Tip 7 8 CHECK NUT 1 SS 316
( Shut Off Type - Standard /
Regulating or Soft Seat ) 1 9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS
BONNET DETAIL 11 HANDLE 1 SS 304

FEATURES
- 3 VALVE MANIFOLD - `H' TYPE - Working Pressure : 6000 Psi (413 Bar)
- 3 Way valve manifolds are designed - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
for direct mounting. Connecting Grafoil 700 Deg. F (371 Deg. C)
from process Flange connection on - Material of construction : SS 316, SS 304, Monel,C.S.
suitable for process. Instrument side - Optional Sour Gas service valves are available
flange connection on suitable for DP confirming to NACE Std. MR - 01 - 75
Transmitter. Connecting system impulse - Stem packing : PTFE, Grafoil.
lines and transmitters, having simple three - Orifice : Dia. 4.7
valves configuration which aloows for - All valves are 100% Factory tested prior to
easy two Block or Isolate, one Equaliser shipment.
valve calibration of a static pressure
transmitter or gauge. - APPLICATION
- Bleed/vent connection with s.s. plug - Refineries, liquid patroleum gas processing plant,
will be provided on request. petro-chemical plants, systems difficult to
- Approximate weight : 1.80 Kg (3.98 Lbs.). shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability
- MANIFOLD SELECTION INFORMATION DATA
- BONNET ASSEMBLY - Pressure & temperature ratings are selected
- Screwed bonnet design. from ANSI B 16.34 for standard class 2500
- Bonnet-back seated blow out proof.
- Spindle - Ground and thread rolled. - TESTING
- Spindle tip-Non rotating tip shut off type - Pneumatic Seat test is performed at 1/4 of working
-stellited, Regulating-stellited and soft seated. pressure.
- Bonnet pusher - silver plated for anti galling - Hydrostatic shell test is performed at 1.5 times the
freezing for increased stem cycle life. working pressure.
- Dust cap protects stem threads from - Optional test are available upon request.
externals contamination.
- Leak tight seal with low operating torque. - LUBRICATION
- Dye molly sulphide
- TECHANICAL SPECIFICATIONS
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
 ENGINEERS

MANIFOLD VALVE

5 VALVE MANIFOLD -(Model-5VMS)

5 VALVE MANIFOLD - SEPERATE TYPE (PIPE TO PIPE CONN.)

11 S.NO. DESCRIPTION QTY. MATERIAL

10 1 B ODY 1 SS 316
BONNET PUSHER 9 1 SS 316
2 BONNET
(Silver Plated for 3
Anti Galling/ Freezing) 3 BONNET PUSHER 1 SS 316
8
BONNET 4 STEM 1 SS 316
(Back Seated Blowout Proof) 2
5 WASHER 1 SS 316
6
SPINDLE 6 PACKING 1 PTFE
(Ground & Thread Rolled) 5
7 BON NET SEA L 1 PTFE
4
SPINDLE TIP - Non Rotating Tip 8 CHECK NUT 1 SS 316
( Shut Off Type - Standard / 7
9 DUST C AP 1 LDPE
Regulating or Soft Seat ) 1
10 GRUB SCREW 1 CS
11 HANDL E 1 SS 304
BONNET DETAIL

FEATURES
- 5 VALVE MANIFOL - SEPARATE TYPE - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
- 5 Way valve manifolds are designed Grafoil 700 Deg. F (371 Deg. C)
for remote or separate mounting. Connecting - Material of construction : SS 316, SS 304, Monel, C.S.
from process side 1/2" NPT(F) and - Optional Sour Gas service valves are available
Instrument side 1/2" NPT(F) Connecting confirming to NACE Std. MR - 01 - 75
system impulse lines and transmitters, - Stem packing : PTFE, Grafoil.
having simple five valves configuration - Orifice : Dia. 4.7
which allows for easy two block or Isolate, - All valves are 100% Factory tested prior to
two Equaliser, one Bleed or Vent valve shipment.
calibration of a static pressure transmitter
or gauge. - APPLICATION
- Bleed/vent connection with s.s. plug - Refineries, liquid patroleum gas processing plant,
will be provided on request. petro-chemical plants, systems difficult to
- Approximate weight : 0.95 Kg (2.1 Lbs.). shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability
- MANIFOLD SELECTION INFORMATION DATA
- BONNET ASSEMBLY - Pressure & temperature ratings are selected
- Screwed bonnet design. from ANSI B 16.34 for standard class 2500
- Bonnet-back seated blow out proof.
- Spindle - Ground and thread rolled. - TESTING
- Spindle tip-Non rotating tip shut off type - Pneumatic Seat test is performed at 1/4 of working
-stellited, Regulating-stellited and soft seated. pressure.
- Bonnet pusher - silver plated for anti galling - Hydrostatic shell test is performed at 1.5 times the
freezing for increased stem cycle life. working pressure.
- Dust cap protects stem threads from - Optional test are available upon request.
externals contamination.
- Leak tight seal with low operating torque. - LUBRICATION
- Dye molly sulphide
- TECHANICAL SPECIFICATIONS
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
- Working Pressure : 6000 Psi (413 Bar)
 ENGINEERS

MANIFOLD VALVE

5 VALVE MANIFOLD -(Model-5VMT)

5 VALVE MANIFOLD - TEE TYPE (PIPE TO FLANGE CONN.)

11 S.NO. DESCRI PT ION QTY . MATERIA L

10 1 B ODY 1 SS 316
BONNET PUSHER 9 2 BONN ET 1 SS 316
(Silver Plated for 3 3 BONN ET PUSH ER 1 SS 316
Anti Galling/ Freezing)
8 4 ST EM 1 SS 316
BONNET
(Back Seated Blowout Proof) 2 5 WASH ER 1 SS 316

6 6 PACK ING 1 PTF E

SPINDLE
5 7 BON NET SEA L 1 PTF E
(Ground & Thread Rolled)
4 8 CH ECK NU T 1 SS 316
SPINDLE TIP - Non Rotating Tip 9 DU ST C AP 1 LDP E
( Shut Off Type - Standard / 7
Regulating or Soft Seat ) 10 GRUB S CREW 1 CS
1
11 HA NDLE 1 SS 304

BONNET DETAIL

FEATURES
- 5 VALVE MANIFOLD - TEE TYPE - Working Pressure : 6000 Psi (413 Bar)
- 5 Way valve manifolds are designed - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
for direct mounting. Connecting Grafoil 700 Deg. F (371 Deg. C)
from process side 1/2" NPT(F) and - Material of construction : SS 316, SS 304, Monel,C.S.
Instrument side flange connection on - Optional Sour Gas service valves are available
suitable for DP Transmitter. Connecting confirming to NACE Std. MR - 01 - 75
system impulse lines and transmitters, - Stem packing : PTFE, Grafoil.
having simple five valves configuration - Orifice : Dia. 4.7
which allows for easy two block or Isolate, - All valves are 100% Factory tested prior to
two Equaliser, one Bleed or Vent valve shipment.
calibration of a static pressure transmitter
or gauge. - APPLICATION
- Bleed/vent connection with s.s. plug - Refineries, liquid patroleum gas processing plant,
will be provided on request. petro-chemical plants, systems difficult to
- Approximate weight : 2.45 Kg (5.4 Lbs.). shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability
- MANIFOLD SELECTION INFORMATION DATA
- BONNET ASSEMBLY - Pressure & temperature ratings are selected
- Screwed bonnet design. from ANSI B 16.34 for standard class 2500
- Bonnet-back seated blow out proof.
- Spindle - Ground and thread rolled. - TESTING
- Spindle tip-Non rotating tip shut off type - Pneumatic Seat test is performed at 1/4 of working
-stellited, Regulating-stellited and soft seated. pressure.
- Bonnet pusher - silver plated for anti galling - Hydrostatic shell test is performed at 1.5 times the
freezing for increased stem cycle life. working pressure.
- Dust cap protects stem threads from - Optional test are available upon request.
externals contamination.
- Leak tight seal with low operating torque. - LUBRICATION
- Dye molly sulphide
- TECHNICAL SPECIFICATIONS
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
 ENGINEERS

MANIFOLD VALVE

5 VALVE MANIFOLD -(Model-5VMH)

5 VALVE MANIFOLD - H - TYPE (FLANGE TO FLANGE CONN.)

11
S.NO. DESCRIPTION QTY. MAT ERIAL
10
1 BODY 1 SS 316
BONNET PUSHER 9
(Silver Plated for 2 BONNET 1 SS 316
3
Anti Galling/ Freezing) 3 BONNET PUSH ER 1 SS 316
8
BONNET 4 STEM 1 SS 316
2
(Back Seated Blowout Pr oof)
5 WASH ER 1 SS 316
6
SPINDLE 6 PACK ING 1 PTFE
(Ground & Thread Rolled) 5
4 7 BONNET SEAL 1 PTFE
SPINDLE TIP - Non Rotating Tip 8 CHECK NUT 1 SS 316
7
( Shut Off Type - Standard /
Regulating or Soft Seat ) 1 9 DUST CAP 1 LDPE
10 GRUB SCREW 1 CS

BONNET DETAIL 11 HANDLE 1 SS 304

FEATURES
- 5 VALVE MANIFOLD - `H' TYPE - Working Pressure : 6000 Psi (413 Bar)
- 5 Way valve manifolds are designed - Temperature Rating : PTFE 450 Deg. F (232 Deg.C)
for direct mounting. Connecting Grafoil 700 Deg. F (371 Deg. C)
from process Flange connection on - Material of construction : SS 316, SS 304, Monel,C.S.
suitable for process. Instrument side - Optional Sour Gas service valves are available
flange connection on suitable for DP confirming to NACE Std. MR - 01 - 75
Transmitter. Connecting system impulse - Stem packing : PTFE, Grafoil.
lines and transmitters, having simple five - Orifice : Dia. 4.7
valves configuration which aloows for - All valves are 100% Factory tested prior to
easy two Block or Isolate, two Equaliser, shipment.
one Bleed or Vent valve calibration of a
static pressure transmitter or gauge. - APPLICATION
- Bleed/vent connection with s.s. plug - Refineries, liquid patroleum gas processing plant,
will be provided on request. petro-chemical plants, systems difficult to
- Approximate weight : 2.45 Kg (5.4 Lbs.). shur off due to solid contents dust, rust, dirt etc.
- Heat code traceability
- MANIFOLD SELECTION INFORMATION DATA
- BONNET ASSEMBLY - Pressure & temperature ratings are selected
- Screwed bonnet design. from ANSI B 16.34 for standard class 2500
- Bonnet-back seated blow out proof.
- Spindle - Ground and thread rolled. - TESTING
- Spindle tip-Non rotating tip shut off type - Pneumatic Seat test is performed at 1/4 of working
-stellited, Regulating-stellited and soft seated. pressure.
- Bonnet pusher - silver plated for anti galling - Hydrostatic shell test is performed at 1.5 times the
freezing for increased stem cycle life. working pressure.
- Dust cap protects stem threads from - Optional test are available upon request.
externals contamination.
- Leak tight seal with low operating torque. - LUBRICATION
- Dye molly sulphide
- TECHNICAL SPECIFICATIONS
- Size : 1/4", 1/2"
- End connection : NPT,BSPT,Socket weld.
 ENGINEERS
BALL VALVE

HIGH PRESSURE BALL VALVE-(Model-HPBV)

FEATURES
- BALL VALVE - Optional Sour Gas service valves are available

- Free floting Ball design provides seat confirming to NACE Std. MR - 01 - 75

wear compensation. - Stem packing : GFT,PEEK

- 2 way, 3 way, 4 way, 5 way - Orifice : Dia 4.7

- 3 Piece body construction - Panel mounting arrangment.

- Adjustable stem seal can be maintained - All valves are 100% Factory tested prior to shipment.

in-line.

- Full operating pressure at any port. - APPLICATION

- Low operating torque - Refineries, liquid patroleum gas processing plant,

- Manual & Actuator operated. petro-chemical plants, systems difficult to

- Handle indicates direction of flow. shur off due to solid contents dust, rust, dirt etc.

- Heat code traceability

- TESTING

- TECHNICAL SPECIFICATIONS - Pneumatic Seat test is performed at 1/4 of working

- Size : 1/4" to 1/2" pressure.

- End Connection : NPT, BSPT, Socket weld, - Hydrostatic shell test is performed at 1.5 times the

Butt weld, Tube fitting. working pressure.

- Pattern : Straight - Optional test are available upon request.

- Working pressure : 10,000 Psi (700 Bar)

- Temperature Rating : GFT 450 Deg F (232 Deg C) - LUBRICATION

PEEK 700 Deg F (371 Deg C) - Dye molly sulphide

- Material of construction : SS 316, SS 304, Hast Alloy

Monel
 ENGINEERS
CHECK VALVE-(Model-CV)

Inlet Outlet

FEATURES
Check valves are designed for uni-directional
flow control of fluids and gases in industries.

- CHECK VALVE - Temperature Rating :

- Resilient, blow out resistant and leak tight PTFE 450 Deg F (232 Deg C)

shut-off seat design. Neoprene - 250Deg F (212Deg C)

- Back stopped Poppet prevents the spring from Buna-N - 275 Deg F (135 Deg C)

being overstressed. Ethylene propylene rubber - 275 Deg F (135 Deg C)

- 100%factory tested for both crack and reseal. - Orifice : 2.0mm Dia. to 16.7mm Dia.

- Cracking pressure include 1/3,1,5,10,25,50,75 and - Material of construction : SS 316, Brass

100 Psig. - Optional Sour Gas service valves are available

- Back pressure may be required to reseal the valve confirming to NACE Std. MR - 01 - 75

with nominal cracking pressure of 5 Psig or lower.

- Heat code traceability - APPLICATION

- Refineries, liquid patroleum gas processing plant,

- LABEL COLOR REFERENCE petro-chemical plants, systems difficult to

- Blue - PTFE shur off due to solid contents dust, rust, dirt etc.

- Green - Neoprene

- Black - Ethylene propylene Rubber - LUBRICATION

- Brown - Buna-N - Dye molly sulphide lubricant is used for outer body

made of SS 316,Brass

- TECHNICAL SPECIFICATIONS - Silicon based lubricant is used for poppet.

- Size : 1/8" to 3/8", 1/2" to 1"

- End Connection : (Male,Female) NPT, BSPT, SAE,

OD Tube.

- Working pressure : SS 316 - 6000 Psi (413Bar)

Brass - 3000 Psi (207 Bar)

 ENGINEERS
RELIEF VALVE-(Model-RV)

RELIEF VALVE
Relief valves are designed such that when the upstream pressure
exceeds the closing force exerted by the spring, the lower stem opens
permitting flow through the valve. Flow through the valve increases.
Proportionately to the increase in up stream pressure.

- FEATURES
- Pressure settings are externally adjustable while the valve is in operation.
- Seat design is blow out proof.
- Manual override option with positive stem retraction is available for
pressure upto 1500 Psig (103Bar). This option permits the user to relieve
upstream pressure while maintaining the predetermined cracking pressure.
- Standard low friction synergistic coating of body bonnet improves crack
and reseal performance.
- Color coded springs and labels indicate spring cracking range.
- Back pressure has minimum effect on cracking pressure.
- Lock wire feature secures a given pressure setting.
- Heat code traceability
Ou tl et

- TECHNICAL SPECIFICATIONS
- Size : 1/4", 3/8", 1/2"
Inl et

- End Connection : Male, Female - NPT, BSPT, ODT Tube

- Pattern : Angle
Relief Valve - Working pressure : 6000 Psi (414 Bar)

(Auto Reset) - Temperature Rating :

Buna-N - 225 Deg. F (107 Deg .C)
Ethylene propylene rubber - 275 Deg. F (135 Deg. C)
Neoprene - 250 Deg. F (121 Deg. C)
Fluorocarbon rubber - 400 Deg. F (204 deg. C)
- Cracking pressure : Eight springs from 50 Psig to 6000 Psig in the following
range.

50 - 350 Psig 2250 - 3000 Psig

350 - 750 Psig 3000 - 4000 Psig
750 - 1500 Psig 4000 - 5000 Psig
1500 - 2250 Psig 5000 - 6000 Psig

- Color code :

50 - 350 Psig____Orange 2250 - 3000 Psig___Red

350 - 750 Psig___Red 3000 - 4000 Psig___Blue
750 - 1500 Psig__Violet 4000 - 5000 Psig___Yellow
1500 - 2250 Psig_Gray 5000 - 6000 Psig___Green

- Material of construction : SS 316

- Optional Sour Gas service valves are available
Outl et confirming to NACE Std. MR - 01 - 75
- Orifice : Dia 3.6
- All valves are 100% Factory tested prior to shipment.
Inl et

- APPLICATION
Relief Valve - Refineries, liquid patroleum gas processing plant,
(Man ual Re set)
petro-chemical plants, systems difficult to
shur off due to solid contents dust, rust, dirt etc.
 ENGINEERS
BLEED VALVE-(Model-BLV)

(Hex Head) (T-Bar Handle) (Ball)

- BLEED VALVE
Bleed Valves are manual Bleed, Vent or Drain valves. They can be used to vent signal line. Pressure
to atmosphere before removal of an instrument or to assist in calibration of control devices.

FEATURES - TECHNICAL SPECIFICATIONS

- with hex head - Size : 1/8" to 1/2"

- Compact for convenient installation. - End connection : Male NPT, BSPT, SAE
- Vent tube directs excess liquid or gas from - Working pressure : 10000 Psi (689Bar)
system lines. - Temperature Rating : 850 Deg F (454 Deg C)
- Male NPT & SAE end connections allow installation - Material of construction : SS 316, SS 304, CS
into variety of systems. - Optional Sour Gas service valves are available
- Chrome plated stem threads and stem tip extend. confirming to NACE Std. MR - 01 - 75
valve cycle life - Orifice : Dia 3.2mm
- Heat code traceability - All valves are 100% Factory tested prior to shipment.

- with handle - APPLICATION

- Compact for convenient installation. - Refineries, liquid patroleum gas processing plant,
- Vent tube directs excess liquid or gas from petro-chemical plants, systems difficult to
system lines. shur off due to solid contents dust, rust, dirt etc.
- Male NPT & SAE end connections allow installation
into variety of systems. - TESTING
- Chrome plated stem threads and stem tip extend - Pneumatic Seat test is performed at 1/4 of working
valve cycle life pressure.
- Hydrostatic shell test is performed at 1.5 times the
- with ball working pressure.
- Compact for convenient installation.
- Male NPT & SAE end connections allow installation
into variety of systems.
- Vent hole bleeds excess liquid or gas from system
lines.
- Cap is crimped to valve body preventing accidental
disassembly.