w

w
w
.c
le
an

ecoGEO 2016
en
er
go
n.
eu
Why choose the ecoGEO heat pump?
pump

COMPREHENSIVE REDUCTION IN CO2

REDUCCIÓN
SAVESECONÓMICO
AHORRO MONEY LOCAL RESOURCE
RECURSO LOCAL

eu
SISTEMA INTEGRAL
SYSTEM EMISSIONS
EMISIONES CO2

n.
go
NO
MINIMUM
MÍNIMO NO FLAMES OR
NO VISUAL
NULO IMPACT
IMPACTO VISUAL LESS NOISE
REDUCIDO RUIDO
MANTENIMIENTO
MAINTENANCE NI LLAMAS, NI HUMOS
SMOKE
er
en
SAVINGS. Ecoforest heat pumps substantially increase savings, not only because they are highly efficient day after day
and reduce CO2 emissions, but because of ecoGEO technology and control strategies. Ecoforest heat pump installation is
simple, compact and economic, an improvement over other heat pumps on the market because the user can forego certain
an

components that would be essential in the installation of a traditional heat pump.

LOCAL RESOURCE. Heat pumps take most of the energy they need from their surrounding environment. Although they
still have to be connected to the mains, they do not need to be supplied with any type of fuel, increasing user convenience
le

and comfort. Likewise, they do not generate flames or smoke and provide a comprehensive heating system with little or
no visual impact.
.c

MINIMAL MAINTENANCE. The technology used by Ecoforest heat pumps is the same as a normal refrigerator, providing
them with long useful lives and minimal maintenance requirements.
w

MINIMAL NOISE. Heat pump technology and insulation reduce noise levels to those of a common household appliance.
Between 35 and 46 dB.
w

SAFETY. No combustion means no flames or smoke. In addition, the ecoGEO heat pump is totally monitored by the
software, so shutdowns are safe in the event of machine or external anomalies.
w

MINIMAL VISUAL IMPACT. None of the components in the geothermal configuration are visible. In the aerothermal or
hybrid configuration, the unit heater can be hidden appropriately to reduce the impact.

COMPREHENSIVE SYSTEM. Ecoforest programming allows comprehensive management of the entire installation from the
control station. Ecoforest programming allows user-friendly configuration of the entire system.

2
Improvements in the new ecoGEO product range by ECOFOREST
Household Range IMPROVEMENTS IN COMPONENTS, new elements
-Electrical resistor 2/4/6kW – In the event of failure in DHW and/or heating and to provide
support for DHW and/or heating; it can be configured in all the models.
-Cooling and reheating in all models (HTR).
-Intake can be vertical or at the rear (thanks to flexible hoses) and more space between intakes,
better adapted to the installation.
-Larger diameters in pipes and 3-way valves: HEATING and WELLS from 1” to 1 ¼” and from
¾” to 1” in DHW.
Basic -The Compact model includes a ¾’’ intake for DHW recirculation.
-Improvements in acoustic insulation, lower noise levels.

eu
-Circulator pumps for larger wells in models 5-22 kW (Wilo Stratos 25/1-12).
-Well safety unit included in all the models with an expansion vessel with more capacity. Well
capacity (8 litres, previously 5 litres).
-New model (ecoGEO 4) with active and passive cold production.
-Inclusion of a condensate drain pan.
-Hydraulic module located at the front of the heat pump.

n.
C ONTROL, no need for an external electrical cabinet

go
-Air Unit Control.
-Hybrid System Control, Air Unit brine + geothermal brine.
-System control with the help of the boiler.
-Control of 3 ecoGEO heat pumps in cascade.   
-Control of 4 outlet units (3 mixed units and 1 direct unit).
Compact -Thermal leap modification in well and temperature circuits.

er
-Control of DHW recirculation. 
-Control of passive external cooling in hybrid installations (brine: aerothermal and geothermal)  
-Software updates via USB.
en
O PERATION Optimisation

-Expansion of the operating range, expansion of the Operation Map.

-Simultaneous operation of DHW and cold or heat production. 
-Improvement in DHW production, using the condenser and completing up to 70ºC with the
desuperheater. (only with optional HTR).
an

-Improvement in the defrost process for configuration with the unit heater, thanks to the in-
clusion of an exchanger.
-Adding floor drying programs and a bleeding system in the primary and secondary circuits.
le

High Power Range I MPROVEMENTS IN COMPONENTS, new elements

-Improvements in acoustic insulation, lower noise levels.

.c

C ONTROL
w

-Control of simultaneous production of cold and heat with HP1 modules

-Control of hybrid systems with the help of the boiler
HP
-Control of 6 ecoGEO heat pumps in cascade, using the Supervisor.
-Control of 5 outlet units (4 mixed units and 1 direct unit) by the heat pump. There can be up
w

to 30 units.
-Thermal leap modification in well and temperature circuits.
-Control of DHW recirculation. 
 -Software updates via USB.
w

O PERATION Optimisation

-Monitoring of the maximum efficiency interval in the «cascade» unit, managing the optimal
point and distributing the number of hours among all the units.
End of 2016
The point of maximum performance in heat pumps is not recorded at full load; therefore,
system control in a configuration with 2 25-100kW pumps (installed power of 200 kW), that
demands 100 kW, will operate the two heat pumps, providing each with 50 kW to run with
the highest COP.

3
NOTES on 2016
Alerts 2016
NOTE1_The new ecoGEO are delivered with: external probe, 3 temperature probes, energy
label, installation and user manuals.

NOTE2_Certain uses may require more than 3 temperature probes

NOTE3_The new ecoGEO heat pumps are not supplied with filters and TH tune in the
household product range and flow switches in the high power range.
NOTE4_The prices in this price list do not include VAT. This price list will become effective on

eu
1 April 2016. 3 Units.

HTR Technology_DHW up to 70ºC without resistors

n.
HTR Technology by Ecoforest: Setup for 2 different DHW temperatures:
Lower temperature or DHW setpoint, covered by using the condenser.
HTR Higher temperature or HTR setpoint (up to 70ºC), completed from the DHW setpoint temperature to the HTR

go
eco FOREST setpoint temperature with the desuperheater.
1st case: Tank temp. < Lower or DHW setpoint temp.
- Priority: Fast DHW production
- Heat pump in DHW only mode, using the condenser for production
- All the power dedicated to DHW production
Fast heating to the lower or DHW setpoint temperature
er
2nd case: Lower or DHW setpoint temp. < Tank temp. < Higher or HTR setpoint
en
temp.
- Priority: maintain comfortable temperature (home temperature)
-Heat pump generates heating with the condenser and DHW with the desuperheater
simultaneously
- DHW temperatures of up to 70ºC without electrical backup
an

- Total power is divided between heating power and DHW power, giving priority to
heating (lower or DHW setpoint temperature has already been reached)
3rd case: Lower or DHW setpoint temp. < Tank temp. < Higher or HTR setpoint temp.
- Priority: maintain comfortable temperature (home temperature)
le

- Heat pump produces heating or cooling (depending on the module) and DHW with
the desuperheater simultaneously
- DHW temperatures of up to 70ºC without electrical backup
- Total power is divided between heating, cooling (depending on the module) and
.c

DHW power, giving priority to heating (lower or DHW setpoint temperature has
already been reached)
w

Temperature
80

HTR Temp. 70C°

w

60
Heating and Maintenance with the Ecoforest HTR system, generating heat or cold
50

DHW Temp. 45C°

w

40
Fast condenser-driven heating
30

20

10

Time

ecoGEO defrost
Take the following into account: for the unit to defrost with Ecoforest technology (using the heat from the DHW, heating or pool) without needing to use
electrical resistors, modules 2 or 4 should be selected. The other modules can work with the AU12 but will not perform ecoGEO defrost.

4
Contents Price List 2016

eu
n.
go
NEW HOUSEHOLD RANGE. Household range heat pumps. P06

er
HIGH POWER RANGE. High power heat pumps. P11
en
NEW BRINE. Brine elements. P15

TECHNICAL ROOM. P17

an

NEW Circulation, circulators and preassembled units. P17

NEW Regulation. P18

le

NEW Acoustic attenuation. P19

.c

DOMESTIC HOT WATER. Inter-storage tanks for domestic hot water. P20
w

HEATING. Buffer tanks. P21

w

DHW HEAT PUMPS P22

w

NEW TECHNICAL ASSISTANCE SERVICE. P22

WARRANTY AND TECHNICAL SERVICE. P23

5
 eu
n.
go
er
Household Range
en
an
le
.c
w
w
w

ecoGEO BASIC ecoGEO COMPACT

-Basic 3-12, 230V -Compact 3-12, 230V
-Basic 5-22, 230V -Compact 5-22, 230V
-Basic 5-22, 400V -Compact 5-22, 400V

6
Heat Pumps ecoGEO_Basic 3-12
B1 3-12 B2 3-12 B3 3-12 B4 3-12

Heating    

DHW with external storage tank    

Application Integrated active cooling  
Integrated passive cooling  
Passive outdoor cooling control  
Compressor range of modulation % 25 to 100 25 to 100 25 to 100 25 to 100

eu
Heating power, B0W35 kW 3 to 14.3 3 to 14.3 3 to 14.3 3 to 14.3
COP, B0W35 max. - 4.6 4.6 4.6 4.6
Active cooling power, B35W7 kW 4 to 16 4 to 16
EER, B35W7 max. - 5 5

n.
Performance Passive cooling power, B16W19 / B16W23 kW 4 / 9.3 4 / 9.3
Maximum unassisted storage temperature ºC 58 58 58 58
Maximum assisted storage temperature ºC 70 70 70 70

go
Noise emission level db 35 to 45 35 to 45 35 to 45 35 to 45

Energy Label/ ηs with average temperature control A+++ / 187%

Heating outlet temperature

Cooling outlet temperature

Brine inlet temperature

er
ºC

ºC

ºC
20 to 60

4 to 35

-10 to +35
20 to 60

4 to 35

-10 to +35
20 to 60

4 to 35

-10 to +35
20 to 60

4 to 35

-10 to +35
en
Working fluids Cooling circuit pressure bar 2 to 45 2 to 45 2 to 45 2 to 45

Production circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3

an

Brine circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3

Refrigerant type / load kg R410A/1.35 R410A/1.35 R410A/1.50 R410A/1.50
Compressor oil type / load kg POE/1.18 POE/1.18 POE/1.18 POE/1.18
1/N/PE 230 V / 50 Hz -    
le

Maximum recommended external protection A C25A C25A C25A C25A

Maximum consumption, B0W35 kW/A 3.3/14.4 3.3/14.4 3.3/14.4 3.3/14.4

Electrical data:
.c

Single phase
Maximum consumption, B0W55 kW/A 5.1/22.4 5.1/22.4 5.1/22.4 5.1/22.4

Starting current A 6.8 6.8 6.8 6.8

w

Correction of cosine φ - 0.96-1 0.96-1 0.96-1 0.96-1

Dimensions Height x width x depth mm 1060x600x710 1060x600x710 1060x600x710 1060x600x710

w

and weight No-load weight with desuperheater kg 185 193 185 193
w

7
Heat Pumps ecoGEO_Compact 3-12
C1 3-12 C2 3-12 C3 3-12 C4 3-12

Heating    
DHW with integrated storage tank, 165 l    
Application Integrated active cooling  
Integrated passive cooling  
Passive outdoor cooling control  

eu
Compressor range of modulation % 25 to 100 25 to 100 25 to 100 25 to 100
Heating power, B0W35 kW 3 to 14 3 to 14 3 to 14 3 to 14
COP, B0W35 max. - 4.6 4.6 4.6 4.6
Active cooling power, B35W7 kW 4 to 16 4 to 16

n.
EER, B35W7 max. - 5 5
Passive cooling power, B16W19 / B16W23 kW 4 / 9.3 4 / 9.3
Performance
Maximum unassisted storage temperature ºC 58 58 58 58

go
Unassisted DHW heating rate ºC/min 1.25 1.25 1.25 1.25
Maximum assisted storage temperature ºC 70 70 70 70
Noise emission level db 35 to 45 35 to 45 35 to 45 35 to 45

Energy Label/ ηs with average temperature control

Heating outlet temperature

Cooling outlet temperature
er
ºC
ºC
20 to 60
4 to 35
A+++ / 187%

20 to 60
4 to 35
20 to 60
4 to 35
20 to 60
4 to 35
en
Brine inlet temperature ºC -10 to +35 -10 to +35 -10 to +35 -10 to +35
Operation limits Cooling circuit pressure bar 2 to 45 2 to 45 2 to 45 2 to 45
Production circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3
an

Brine circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3

Maximum DHW storage tank pressure bar 8 8 8 8
Refrigerant type / load kg R410A/1.35 R410A/1.35 R410A/1.50 R410A/1.50
Working fluids
Compressor oil type / load kg POE/1.18 POE/1.18 POE/1.18 POE/1.18
le

1/N/PE 230 V / 50 Hz -    

Maximum recommended external protection A C25A C25A C25A C25A

.c

Electrical data: Maximum consumption, B0W35 kW/A 3.3/14.4 3.3/14.4 3.3/14.4 3.3/14.4
Single-phase
Maximum consumption, B0W55 kW/A 5.1/22.4 5.1/22.4 5.1/22.4 5.1/22.4
Starting current A 6.8 6.8 6.8 6.8
w

Correction of cosine φ - 0.96-1 0.96-1 0.96-1 0.96-1

Dimensions and Height x width x depth mm 1804x600x710 1804x600x710 1804x600x710 1804x600x710

weight
w

No-load weight with desuperheater kg 246 254 246 254

w

8
Heat Pumps ecoGEO_Basic 5-22
B1 5-22 B2 5-22 B3 5-22 B4 5-22
Heating    

DHW with external storage tank    

Application Integrated active cooling  

Integrated passive cooling  

Passive outdoor cooling control  

Compressor range of modulation % 25 to 100 25 to 100 25 to 100 25 to 100

eu
Heating power, B0W35 kW 6 to 25 6 to 25 6 to 25 6 to 25

COP, B0W35 max. - 4.9 4.9 4.9 4.9

Active cooling power, B35W7 kW 7 to 29 7 to 29

EER, B35W7 max. - 5 5

n.
Performance
Passive cooling power, B16W19 / B16W23 kW 4 / 9.3 4 / 9.3

Maximum unassisted storage temperature ºC 58 58 58 58

go
Maximum assisted storage temperature ºC 70 70 70 70

Noise emission level db 35 to 46 35 to 46 35 to 46 35 to 46

Energy Label/ ηs with average temperature control A+++ / 206%

Heating outlet temperature ºC 20 to 60 20 to 60 20 to 60 20 to 60

Operation limits
Cooling outlet temperature

Brine inlet temperature

Cooling circuit pressure

er
ºC

ºC

bar
4 to 35

-10 to 35

2 to 45
4 to 35

-10 to 35

2 to 45
4 to 35

-10 to 35

2 to 45
4 to 35

-10 to 35

2 to 45
en
Production circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3

Brine circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3

Refrigerant type / load kg R410A/1.70 R410A/1.70 R410A/2.00 R410A/2.00

Working fluids
an

Compressor oil type / load kg POE/1.18 POE/1.18 POE/1.18 POE/1.18

Maximum recommended external protection A C40A C40A C40A C40A

Maximum consumption, B0W35 kW/A 5.8/25.2 5.8/25.2 5.8/25.2 5.8/25.2

Electrical data:
le

Maximum consumption, B0W55 kW/A 8.5/36.8 8.5/36.8 8.5/36.8 8.5/36.8

Single-phase
Starting current A 11.1 11.1 11.1 11.1

Correction of cosine φ - 0.96-1 0.96-1 0.96-1 0.96-1

.c

Maximum recommended external protection A C16A C16A C16A C16A

Maximum consumption, B0W35 kW/A 5.8/8.4 5.8/8.4 5.8/8.4 5.8/8.4

Electrical data:
w

Maximum consumption, B0W55 kW/A 8.5/12.2 8.5/12.2 8.5/12.2 8.5/12.2

Three-phase
Starting current A 3.7 3.7 3.7 3.7

Correction of cosine φ - 0.96-1 0.96-1 0.96-1 0.96-1

w

Height x width x depth mm 1060x600x710 1060x600x710 1060x600x710 1060x600x710

Dimensions
No-load weight with desuperheater kg 185 193 185 193
w

9
Heat Pumps ecoGEO_Compact 5-22
C1 5-22 C2 5-22 C3 5-22 C4 5-22
Heating    

DHW with integrated storage tank, 165 l    

Application Integrated active cooling  

Integrated passive cooling  

Passive outdoor cooling control  

Compressor range of modulation % 25 to 100 25 to 100 25 to 100 25 to 100

eu
Heating power, B0W35 kW 6 to 25 6 to 25 6 to 25 6 to 25
COP, B0W35 max. - 4.9 4.9 4.9 4.9
Active cooling power, B35W7 kW 7 to 29 7 to 29

EER, B35W7 max. - 5 5

n.
Performance Passive cooling power, B16W19 / B16W23 kW 4 / 9.3 4 / 9.3
Maximum unassisted storage temperature ºC 58 58 58 58
Unassisted DHW heating rate ºC/min 1.9 1.9 1.9 1.9

go
Maximum assisted storage temperature ºC 70 70 70 70
Noise emission level db 35 to 46 35 to 46 35 to 46 35 to 46
Energy Label/ ηs with average temperature control A+++ / 206%
Heating outlet temperature ºC 20 to 60 20 to 60 20 to 60 20 to 60

Operation limits
Cooling outlet temperature
Brine inlet temperature
Cooling circuit pressure
er
ºC
ºC
bar
4 to 35
-10 to 35
2 to 45
4 to 35
-10 to 35
2 to 45
4 to 35
-10 to 35
2 to 45
4 to 35
-10 to 35
2 to 45
en
Production circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3
Brine circuit pressure bar 0.5 to 3 0.5 to 3 0.5 to 3 0.5 to 3
Maximum DHW storage tank pressure bar 8 8 8 8
an

Refrigerant type / load kg R410A/1.70 R410A/1.70 R410A/2.00 R410A/2.00

Working fluids
Compressor oil type / load kg POE/1.18 POE/1.18 POE/1.18 POE/1.18
Recommended protection A C40A C40A C40A C40A
Maximum consumption, B0W35 kW/A 5.8/25.2 5.8/25.2 5.8/25.2 5.8/25.2
Electrical data:
le

Maximum consumption, B0W55 kW/A 8.5/36.8 8.5/36.8 8.5/36.8 8.5/36.8

230 V
Starting current A 11.1 11.1 11.1 11.1
Correction of cosine φ - 0.96-1 0.96-1 0.96-1 0.96-1
.c

Maximum recommended external protection A C16A C16A C16A C16A

Maximum consumption, B0W35 kW/A 5.8/8.4 5.8/8.4 5.8/8.4 5.8/8.4
Electrical data:
w

Maximum consumption, B0W55 kW/A 8.5/12.2 8.5/12.2 8.5/12.2 8.5/12.2

400 V
Starting current A 3.7 3.7 3.7 3.7
Correction of cosine φ - 0.96-1 0.96-1 0.96-1 0.96-1
w

Dimensions and
Height x width x depth mm 1804x600x710 1804x600x710 1804x600x710 1804x600x710
weight
No-load weight with desuperheater kg 247 255 247 255
w

10
 eu
n.
go
er
High Power Range
en
an
le
.c
w
w
w

ecoGEO HP
-HP 12-40, 400V
-HP 15-70, 400V
-HP 25-100, 400V

11
Heat Pumps ecoGEO_HP 12-40

HP1 12-40 HP3 12-40

Heating, DHW with external storage tank and pool  

Applications Integrated active cooling 

Passive outdoor cooling control  

eu
Compressor range of modulation % 25 to 100 25 to 100
Heating power, B0W35 kW 10.7 to 44.6 10.7 to 44.6
COP, B0W35 max. - 4.6 4.6
Active cooling power, B35W7 kW 12.1 to 49.0

n.
Performance EER, B35W7 max. - 5 5
Maximum unassisted stored DHW temperature ºC 60 60

go
Maximum assisted storage temperature ºC 70 70
Noise emission level db 43 to 58 43 to 58
Energy Label/ ηs with average temperature control A+++ / 187%
Heating outlet temperature ºC 20 to 60 20 to 60

Operation limits
Cooling outlet temperature
Brine inlet temperature
Cooling circuit pressure
er ºC
ºC
bar
-20 to 35
-20 to 35
2 to 45
-20 to 35
-20 to +35
2 to 45
en
Production circuit pressure bar 0.5 to 3 0.5 to 3
Brine circuit pressure bar 0.5 to 3 0.5 to 3
Refrigerant type / load kg R410A/4.0 R410A/4.2
Compressor oil type / load kg POE/3.3 POE/3.3
an

Working fluids Antifreeze agent recommended for the brine circuit - Propylene glycol Propylene glycol
Brine nominal flow, B0W35(ΔT = 3ºC) l/h 2405 to 9830 2405 to 9830
Production nominal flow, B0W35 (ΔT = 5 ºC) l/h 1845 to 7685 1845 to 7685
3/N/PE 400 V / 50 Hz -  
le

Maximum recommended external protection A C25A C25A

Electrical data: Maximum consumption, B0W35 kW/A 10,9/17.7 10.9/17.7

Three-phase
.c

Maximum consumption, B0W55 kW/A 15.5/24.6 15.5/24.6

Starting current A 9.8 9.8
Correction of cosine φ - 0.96-1 0.96-1
w

Dimensions Height x width x depth mm 1000x950x900 1000x950x900

and weight No-load weight Kg 280 285
w

Reference 5001 5004

w

12
Heat Pumps ecoGEO_HP 15-70

Units HP1 15-70 HP3 15-70

Heating, DHW with external storage tank and pool  

Applications Integrated active cooling 

Passive outdoor cooling control  

eu
Compressor range of modulation % 25 to 100 25 to 100
Heating power, B0W35 kW 17.1 to 59.6 17.1 to 59.6
COP, B0W35 max. - 4,5 4.5
Active cooling power, B35W7 kW 19.6 to 65.8

n.
Performance EER, B35W7 max. - 5
Maximum unassisted stored DHW temperature ºC 60 60

go
Maximum assisted storage temperature ºC 70 70
Noise emission level db 45 to 62 45 to 62
Energy Label/ ηs with average temperature control A+++ / 192%
Heating outlet temperature ºC 20 to 60 20 to 60

Operation limits
Cooling outlet temperature
Brine inlet temperature
Cooling circuit pressure
er ºC
ºC
bar
-20 to 35
-20 to 35
2 to 45
-20 to 35
-20 to +35
2 to 45
en
Production circuit pressure bar 0.5 to 3 0.5 to 3
Brine circuit pressure bar 0.5 to 3 0.5 to 3
Refrigerant type / load kg R410A/4.7 R410A/5.5
Compressor oil type / load kg POE/3.6 POE/3.6
an

Working fluids Antifreeze agent recommended for the brine circuit - Propylene glycol Propylene glycol
Brine nominal flow, B0W35(ΔT = 3ºC) l/h 3230 to 13195 3230 to 13195
Production nominal flow, B0W35(ΔT = 5 ºC) l/h 2465 to 10265 2465 to 10265
3/N/PE 400 V / 50 Hz -  
le

Maximum recommended external protection A C40A C40A

Electrical data: Maximum consumption, B0W35 kW/A 14.3/23.2 14.3/23.2

Three-phase
.c

Maximum consumption, B0W55 kW/A 20.4/32.3 20.4/32.3

Starting current A 12.8 12.8
Correction of cosine φ - 0.96-1 0.96-1
w

Dimensions Height x width x depth mm 1000x950x900 1000x950x900

and weight No-load weight kg 320 325
w

Reference 5002 5005

w

13
Heat Pumps ecoGEO_HP 25-100

HP1 25-100 HP3 25-100

Heating, DHW with external storage tank and pool  

Application Integrated active cooling 

eu
Passive outdoor cooling control  
Compressor range of modulation % 25 to 100 25 to 100
Heating power, B0W35 kW 21.1 to 86.7 21.1 to 86.7
COP, B0W35 max. - 4.5 4.5

n.
Active cooling power, B35W7 kW 28.3 to 116.9

EER, B35W7 max. - 5.2

Performance
Maximum unassisted stored DHW temperature ºC 60 60

go
Maximum assisted storage temperature ºC 70 70
Noise emission level db 47 to 65 47 to 65
Energy Label/ ηs with average temperature control Pending

Operation limits
Heating outlet temperature
Cooling outlet temperature
Brine inlet temperature
er ºC
ºC
ºC
20 to 60
-20 to 35
-20 to 35
20 to 60
-20 to 35
-20 to +35
en
Cooling circuit pressure bar 2 to 45 2 to 45
Production circuit pressure bar 0.5 to 3 0.5 to 3
Brine circuit pressure bar 0.5 to 3 0.5 to 3
Refrigerant type / load kg R410A/8.5 R410A/9.1
an

Compressor oil type / load kg POE/6.7 POE/6.7

Working fluids Antifreeze agent recommended for the brine circuit - Propylene glycol Propylene glycol
Brine nominal flow, B0W35 (ΔT = 3 ºC) l/h 4765 to 19360 4765 to 19360
Production nominal flow, B0W35 (ΔT = 5 ºC) l/h 3625 to 14935 3625 to 14935
le

3/N/PE 400 V / 50 Hz -  
Maximum recommended external protection A C50A C50A
.c

Electrical data: Maximum consumption, B0W35 kW/A 20.3/31.8 20.3/31.8

Three-phase Maximum consumption, B0W55 kW/A 29.6/45.1 29.6/45.1
Starting current A 15.7 15.7
w

Correction of cosine φ - 0.96-1 0.96-1

Height x width x depth mm 1000x950x900 1000x950x900
Dimensions and weight
w

No-load weight kg 350 355

Reference 5003 5006

w

14
Brine ecoGEO
AIR UNIT, AU12 Overall features of the Air Unit
NEW Compatible with ecoGEO BASIC and ecoGEO COMPACT heat pumps Nominal voltage 230 V / 50 Hz, 1/N/PE~
Exclusive hydraulic installation Maximum electrical consumption 180 W
Fan speed control Starting current 0.20 A
Direct connection to the heat pump Fan rotation speed 400-1000 rpm air flow 1000-4700 m3/h
Axial Ziehl-Abbeg fan with the highest efficiency and most silent operation in the market Noise emission level (5 m ) 42-62 dB
Built-in hybrid operation. Optional combination with geothermal brine Dimensions (Height x Width x Depth) 901x 1007 x 478 mm
Modular configuration. Optional connection of several units to increase power and perfor- Fan diameter 446 mm
mance No-load weight (not assembled) 85 kg
Main installation components in the internal unit, thereby increasing useful life

AIR UNIT, AU12: 1 UNIT

eu
n.
AIR UNIT, AU12: 2 UNITS

go
ecoGEO 3-12 kW + AU 12
er
AIR UNIT, AU12 WITH GEOTHERMAL PROBE: HYBRID SYSTEM
en
Air temperature °C -15°C -7°C 2°C 7°C 20°C
Outlet temperature °C 35°C

Heat Output kW
6.46 8.73 11.76 13.73 20.09

Power Consumed kW
3.21 3.21 3.19 3.16 3.05
an

COP
2.01 2.72 3.69 4.34 6.59 The consumption of the
circulator pumps, primary and
Outlet temperature °C 55°C
secondary, are included in the
Heat Output kW
4.39 6.48 8.8 10.36 15.44 consumption.

Power Consumed kW
3.64 4 4 4 4
le

COP
1.21 1.62 2.2 2.59 3.86 Compressor 100%

Compressor 85%
ecoGEO 5-22 kW + AU 12 Compressor 70%
.c

Air temperature °C -15°C -7°C 2°C 7°C 20°C NO:

Outlet temperature °C 35°C

14.05 18.8 22.02 32.64

w

Heat Output kW

Power Consumed kW
5.28 5.44 5.55 5.82

COP
2.66 3.46 3.97 5.61
w

Outlet temperature °C 55°C

Heat Output kW
13.52 17.36 19.84 28.00

Power Consumed kW
8 8 8 8
w

COP
1.69 2.17 2.48 3.5

SUPPORT FOR AIR UNIT AU12. Support for the AIR

UNIT AU12, especially designed for the external unit.
BRACKET SUPPORT Manufactured in 4 mm thick steel plate.

Model Reference
SILENT BLOCK Brackets support 3400
Silent blocks* 540
A (mm) 30
B (mm) 30 * 4 units are needed for each AU12.
C M8

15
Brine ecoGEO
P LATE EXCHANGER DISMOUNTABLE MADE OF TITANIUM FOR WATER TABLE BRINE, the
characteristics are shown below.

11 KW 20 KW
Hot Side Cold Side Hot Side Cold Side

Fluid Water 30.0% Prop.glycol Fluid Water 30.0% Prop.glycol

Density kg/m³ 1001 1035 Density kg/m³ 1001 1035
Specific heat kJ/(kg*K) 4.21 3.90 Specific heat kJ/(kg*K) 4.21 3.90
Thermal conductivity W/(m*K) 0.575 0.449 Thermal conductivity W/(m*K) 0.575 0.449
Intake viscosity cP 1.52 8.33 Intake viscosity cP 1.52 8.33
Outlet viscosity cP 1.71 7.12 Outlet viscosity cP 1.71 7.12 Model Reference
Volume flow rate m³/h 2.5 3.3 Volume flow rate m³/h 4.4 5.9
Inlet temperature °C 5.0 -3.0 Inlet temperature °C 5.0 -3.0 11 kW 3008

eu
Outlet temperature °C 1.2 0.0 Outlet temperature °C 1.1 0.0
Load loss kPa 18.2 33.5 Load loss kPa 19.6 39.6 20 kW 3009
Heat exchanged kW 11.00 Heat exchanged kW 20.00
L.M.T.D. K 4.6 L.M.T.D. K 4.6
No. of effective plates 18 No. of effective plates 32
Dimensions mm 695x235x610 Dimensions mm 695x235x610

n.
NEW
W ELL-FILLING KIT with filter, to connect to the brine circuit and fill the circuit with a
glycolated mixture. This kit can be used to fill the circuit with a glycolated mixture to

go
protect it and the filter can be cleaned without losing any of the mixture. Installation represents
saving of approximately 100 €.
Kit body: Brass
Filter: Stainless Steel AISI 304
Filter: Stainless Steel AISI 304

A (mm) 125.5
B (mm) 40
C (mm) 171
Drain valve: 1/2"
er
Insulation: Neopor foam 30 g/l

Max. working pressure: 16 bar

Max. working pressure: +100ºC
Min. working pressure: -20 ºC
Model Reference
en
Filling kit 3007
SAVE:

2 Units. 2 Units. 1 Units.

an

NEW
F ILTERBALL, the perfect valve to shut off one of the flows and filter the circuit. This saves in
labour, since the valve shuts off and filters. The valve is coated in magnetite so it retains the
metal particles in the hydraulic circuit.
le

Kit body: Nickle-plated brass

Filter: Stainless Steel AISI 304
.c

Female connection: 1 1/4"

H (mm) 129 Max. working pressure: 16 bar
L (mm) 87 Max. working pressure: +100ºC
Min. working pressure: -20 ºC
w

SAVE:
Model Reference
Filterball 3011
w

2 Units. 1 Unit.

T he SBS 2000 is the ideal companion for professional work. We have thought of everything
w

during its development – easy to transport, use and clean. Its large smooth-rolling wheels
and additional handles at the base make it easy to handle even when the tank is full. The
30-litre tank is impact proof and semi-transparent, to control the filling level at any time. The
SBS 2000 was designed for cleaning and filling systems containing water, mixtures of water
and glycol or liquid detergents.
Fluid: Water, glycol mixtures, cleaning liquids
Dimensions: 1000 × 400 × 530 mm
Weight: 21 kg
Distribution flow: 5-47 l/min
Distribution height: 42 m
Pump power: 1000 W (230 V~, 50 Hz)
Drain valve: 1/2"
Average temperature: max. 65°C Model Reference
Tank: 30 litres, PE, with absorption filter
Pump pressure: 4.2 bar
SBS2000 3004

16
Technical Room Components
Circulator pumps and Preassembled Units

ECOGEO COMBINED OUTLET UNIT

NEW
Combined unit equipped with an insulation box for
Model Reference
wall mounting.
It has a built-in YONOS Para 15/6 circulator pump 0-10 3014
of 130 mm and an ESBE VRG332-KVS13 three-way
valve. 0-10
Includes outlet and return valves with
thermometers.

eu
Direction of flow:
WILO STRATOS PARA, HEATING AND BRINE
Type
Model Reference
Glandless circulator pump with threaded connec-

n.
tion, CE motor with automatic power adjustment. Stratos PARA 25/1-11 555
Power 230V. Stratos PARA 25/1-12 565
Application
All hot water heating systems, heating installations,

go
closed cooling circuits and industrial circulation
systems.

WILO STRATOS HEATING AND BRINE

Type
er
Glandless circulator pump with flanged connection,
CE motor with automatic power adjustment.
Application
Model

40/1-12
Voltage

230
Connec-
tion
Reference

Flange 5550
en
All hot water heating systems, heating installations, Stratos 40/1-16 230 Flange 5551
closed cooling circuits and industrial circulation Stratos 50/1-12 230 Flange 5552
systems.
Flange not included. Stratos 50/1-16 230 Flange 5553
an

WILO STRATOS Z 1-8 FOR DOMESTIC HOT WATER

Type
Model Reference
le

Glandless circulator pump with connection for

domestic hot water applications. Stratos Z 1-8 3200
.c
w

EXTERNAL REGULATION MODULE 0-10V

The IF Stratos modules are appropriate for external Model Reference
w

control and to report the operating status of the External Regulation Module 5548
Stratos series Wilo pumps via messages.
w

CHARACTERISTIC CIRCULATOR PUMP CURVES

NOTE_Check delivery times for circulator pumps. If the pump is not in stock, the delivery time will depend on the manufacturer, WILO. 17
 Technical Room Components
Adjustment Accessories

NEW AMBIENT TEMPERATURE PROBE TH-t

The ThT thermostat is the CAREL ambient thermostat used by users to control the temper-
ature in residential and commercial settings, equipped with an interface that is ideal for end
Model
TH-t
Reference
3019
users. Temperature adjustment using the knob on the front panel is simple and user-friend-
ly. The standard RS485 connection via the Modbus protocol allows multiple screens to be
TH-t embedded 3021
connected to a controller to create synergic control logic with programmable controllers.
COMPATIBLE WITH THE DOMESTIC ECOGEO PRODUCT RANGE.

eu
NEW
HOT/COLD THERMOSTAT
-Digital wall thermostat 1TP TE530B of the series ZEFIRO 3V 80 x 80 white Display LCD 2”
Model
1TPTE530B.BAT-
Reference
3100
1/3 temperature levels 2 + anti-ice Commando COLD/HOT Power supply: 2 alkaline batteries TERIES
1.5V AAA Autonomy 24 months. Relay and battery status indicator. 1TPTE531B. 230V 3101

n.
AVAILABLE 230V (1TPTE531B).

3-WAY MODULATING VALVE Model Reference

go
-Modulating valve 0-10V for applications that use the ecoGEO. Servo-motor 778
Valve 1” 779

SERVOMOTOR FOR 3-WAY VALVE, open/closed er

Servomotor with power supply 230V, open and closed 60’’, 3 wires. COMBINATION WITH
549/1
Model
HEAT application
COLD application
Reference
550
3016
en
FRIDGE MODEL HEAT MODEL

NEW

3-WAY VALVE Model

Valve 1 1/4”
Reference
549/1
an

Brass body. Nominal operating pressure: 10 bar. Maximum differential pressure: 6 bar.
Operating temperature: from 0ºC to 100ºC.
le

NTC TEMPERATURE PROBE

Temperature probe NTC CAREL 10 KΩ.
Model
NTC temp. probe
Reference
509
.c
w

HP MODELS

FLOW SWITCH Model Reference

w

Static sensor without moving parts, maintenance or replacement. Reliable electric connection Flow switch 3012
using a standard M12 connector. Flexible adjustment (pulses), reliable (known value) and no Cable for flow switch 3013
mechanical adjustments.
w

HP MODELS

SUPERVISOR
Control component to manage up to 6 heat pumps in cascade, connected in parallel.
Model
Supervisor
Reference
5050
-Management of the maximum efficiency interval in the «cascade» unit, managing the optimal
point and distributing the number of hours among all the units.

18
Technical Room Components
Acoustic Accessories

ACOUSTIC BASE FOR ecoGEO

Economic and easy to install

eu
Noise level reduction
Protects the ecoGEO against ground moisture and flooding
Replaces construction of a work bench
Easy to install

n.
Model Reference
Height 45 mm (B, C) 3800

go
Height 45 mm (HP) 3810

HP MODELS

ACOUSTIC KIT FOR COMPRESSOR

er
en
Innovative design techniques and materials from the automotive sector have been used to
design this acoustic cover. All its components are injection moulded at low pressure (top cover,
connection box cover and base plate of the compressor) to provide noise reduction of 10 to
12 dBA. A significant improvement over conventional covers provided by other manufacturers,
only capable of reducing noise levels between 3 and 6 dBA, depending on the application.
Development of the design focused especially on mounting the cover so it would be as easy as
an

possible in all circumstances: new installation, replacement or maintenance.

le

Model Reference
Acoustic kit ecoGEO HP 12-40 910
.c

Acoustic kit ecoGEO HP 15-70 911

Acoustic kit ecoGEO HP 25-100 912
w
w
w

19
 Domestic Hot Water
DHW Tanks

CHARACTERISTICS OF THE DHW TANKS

Designed specifically for our heat pumps
STORAGE TANK RESISTOR
CONNECTION 1”, THERMOSTAT INCLUDED
Manufactured in AISI 316 stainless steel
Flexible helical corrugated coil that increases the contact surface and improves heat transmission
Rigid, injected, HCFC-free polyurethane foam
Outer finish in semi-rigid PVC
Standard volumes of 200 to 1000 litres
Contact us for different designs Model Reference

eu
Resist. 2 kW 901

T-DW 1-2-5 3-7 4-9 8 6

200 1” 3/4” 1/2” 1 1/4” 1”
200-300 LITRES

n.
300 1” 3/4” 1/2” 1 1/4” 1”
Conn. type H H H H M

Model B (mm) A (mm)

go
T-DW 200 1502 520
T-DW 300 1886 560

er
FROM 500 TO 1,000 LITRES

T-DW 1-2-5 3-7 4-9-11 6 10 8

en
500 1 1/4” 1” 1/2” 1 1/4” 2” -
750 1 1/4” 1” 1/2” 1 1/4” 2” DN250
1000 1 1/4” 1” 1/2” 1 1/4” 2” DN400
an

Conn. type H H H H H Flange

Model B (mm) A (mm)
T-DW 500 1904 670
T-DW 750 1815 930
le

T-DW 1000 2055 930

.c

ecoCOMBI 1-4-7-8-11 3 2-5-6-9 10 12

200-50 1/2” 3/4” 1” 1 1/4” 1”
Conn. type H H H H M
w
COMBI

Model B (mm) A (mm)

w

T-DW 200 1880 520

w

T-DW 200 T-DW 300 T-DW 500 T-DW 750 T-DW 1000 ecoCOMBI*
Volume (l) 200 300 500 750 1000 200
2
Coil exchange surface (m ) 2.2 3.15 4.47 7 8 2.2
DHW operating pressure (bar) 8 8 8 8 8 8
External diameter (mm) 520 560 670 930 930 520
Total height (mm) 1,502 1,866 1,904 1,815 2,055 1,880
Reference 852 851 854 855 856 850

20 * 200 litres for DHW and 50 litres for Buffer.

Buffer Not suitable for cooling applications.
Heating
Buffer tanks

CHARACTERISTICS OF BUFFER TANKS

Designed specifically for our heat pumps
Suitable for both heating and cooling applications
Manufactured in carbon steel
Thermally insulated with rigid, injected, HCFC-free polyurethane foam
Outer finish in semi-rigid PVC
Standard volumes of 80 to 2000 litres
Contact us for different designs

eu
T-B 1-2-8 3-4-6-7 5
80 1/2” H 1 1/2” H 1/2” H

n.
100 1/2” 1 1/2” 3/4”
200 1/2” 2” 3/4”
300 1/2” 3” 3/4”

go
500 1/2” DN80 1”
750 1/2” DN80 1”
1000 1/2” DN80 1”

er2000
Conn. type
1/2”
H threaded
DN100
Flange
1 1/2”
Threaded
en
OUTLET UNITS
HYDRAULIC NEEDLE
an

BUFFER

HEAT PUMP

HEAT PUMP
le
.c
w

Buffer tank in parallel. Buffer tank in "buffer" series

Designed specifically for our heat pumps. Designed specifically for our heat pumps.
w

Ideal layout when the design requires energy storage. Ideal layout when a minimum volume in the circuit is not guaranteed.
w

T-B 80 T-B 100 T-B 200 T-B 300 T-B 500 T-B 750 T-B 1000 T-B 2000
Volume (l) 80 100 200 300 500 750 1000 2000
Operating pressure (bar) 3 3 3 3 3 3 3 3
External diameter (mm) 520 520 520 560 670 930 930 1.280
Total height (mm) 730 952 1,502 1,866 1,904 1,815 2,055 2,361
Reference 853 859 857 858 863 864 860 861

21
DHW Heat Pump_ecoGEO AIR

DHW HEAT PUMP

Economic operation powered by natural energy.
Eliminates ambient moisture.
Silent operation.
Maximum safety.
Easy to use.
Three operating schedules available.
Manual activation of the electrical resistor.
Legionella protection mode.

eu
Manufactured in Stainless Steel 304.
Ground connection in the 300 litre model.

ecoAIR ecoAIR
ACS190 ACS300

n.
GAS R134a (grams) 950 g 1,200 g
Capacity (litres) 190 l 300 l
Dimensions (diameter x height in mm) 568 x 1670 650 x 1920

go
Total height (mm) 730 952
Operating range (ºC) -7/+43 -7/+43
Heating power (W) 1500 3000
COP 3.6 3.6
Reference er 1060 1061
en

Technical Assistance Service

an

NEW
le

TRAINING BOX
-
Useful tool for training in remote troubleshooting.
.c
w

Model Reference
Training box 5060
w

Training box HP 5070

w

22
Warranty and Technical Service

MANUFACTURER'S WARRANTY

ECOFOREST is liable for lack of conformity of the product or its spare parts, in compliance with the current
regulations of the country where the product is purchased. The warranty is only valid in the country where
the product is purchased.
In addition, with previous consent from ECOFOREST, the local authorised distributor can offer an extension
of the warranty established by current legislation.

eu
Conditions and validity of the warranty
In order for this warranty to be considered valid the following conditions must be verified.
ECOFOREST must allow the product under warranty to be sold in the country where it is going to
be installed.

n.
The product under warranty must be used exclusively for the purpose that it was designed for.
All installation, start-up, maintenance and repair work carried out on the equipment must be

go
performed by a technical service authorised by ECOFOREST.
All replacement of parts must be carried out by a technical service authorised by ECOFOREST and
always with original ECOFOREST spare parts.
The purchaser must inform the establishment that sold the product of the lack of conformity with-
in 30 (thirty) days.
er
For the warranty to be effective, the purchaser must present a legal document that supports the
date of purchase from the establishment that made the sale.
Disclaimer of warranty
en
The warranty does not include product non-conformities derived from:
Weather conditions, chemical agents, improper use and other causes that do not depend directly
on the product.
an

Installation and/or handling of the equipment by unauthorised personnel.

Improper transportation of the product.
Part wear due to normal equipment operation, unless due to a manufacturing defect.
Request for service under warranty
le

A request for service during the warranty period must be presented at the establishment where the prod-
uct was purchased.
Product returns will only be accepted if previously accepted in writing by ECOFOREST.
.c

The product must be returned in its original packaging and with a legal document that supports the date
of purchase from the establishment that made the sale.
w

AUTHORISED DISTRIBUTORS AND TECHNICAL SERVICE

w

ECOFOREST has an extensive network of authorised companies that distribute and perform the technical
service on its products. This network will provide our customers with all the information and technical
support they need, anywhere and under any circumstance.
w

23
 eu
n.
go
er
en
an
le

More information available at:

.c

www.ecoforest.es
w
w
w

Ecoforest shall not be held reliable for any errors contained in this price list and reserves the right to make any changes it deems necessary for both technical and
commercial reasons at any time and without prior notification. The availability of the equipment described herein shall always be confirmed by Ecoforest. The inclusion of
equipment in this price list does not imply immediate availability of the same.