Unisonic Technologies Co., LTD: 10 Amps, 600/650 Volts N-Channel Power Mosfet
Unisonic Technologies Co., LTD: 10 Amps, 600/650 Volts N-Channel Power Mosfet
Unisonic Technologies Co., LTD: 10 Amps, 600/650 Volts N-Channel Power Mosfet
, LTD
10N60 Power MOSFET
DESCRIPTION 1
TO-220
The UTC 10N60 is a high voltage and high current power MOSFET,
designed to have better characteristics, such as fast switching time, low
gate charge, low on-state resistance and have a high rugged avalanche
characteristics. This power MOSFET is usually used at high speed
switching applications in power supplies, PWM motor controls, high 1
efficient DC to DC converters and bridge circuits.
TO-220F
FEATURES
* 10A, 600V, RDS(ON) =0.73Ω@VGS =10V
* Low gate charge ( typical 44 nC) 1
TO-220F1
* Low Crss ( typical 18 pF)
* Fast switching
* 100% avalanche tested
* Improved dv/dt capability
SYMBOL 1
TO-263
2.Drain
1.Gate
3.Source
ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Lead Free Halogen Free 1 2 3
10N60L-x-TA3-T 10N60G-x-TA3-T TO-220 G D S Tube
10N60L-x-TF1-T 10N60G-x-TF1-T TO-220F1 G D S Tube
10N60L-x-TF3-T 10N60G-x-TF3-T TO-220F G D S Tube
10N60L-x-TQ2-R 10N60G-x-TQ2-R TO-263 G D S Tape Reel
10N60L-x-TQ2-T 10N60G-x-TQ2-T TO-263 G D S Tube
Note: Pin Assignment: G: Gate D: Drain S: Source
www.unisonic.com.tw 1 of 7
Copyright © 2010 Unisonic Technologies Co., Ltd QW-R502-119.E
10N60 Power MOSFET
ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise specified)
PARAMETER SYMBOL RATINGS UNIT
10N60-A 600 V
Drain-Source Voltage VDSS
10N60-B 650 V
Gate-Source Voltage VGSS ± 30 V
Avalanche Current (Note 2) IAR 10 A
Continuous ID 10 A
Drain Current
Pulsed (Note 2) IDM 38 A
Single Pulsed (Note 3) EAS 700 mJ
Avalanche Energy
Repetitive (Note 2) EAR 15.6 mJ
Peak Diode Recovery dv/dt (Note 4) dv/dt 4.5 V/ns
TO-220 156 W
Power Dissipation TO-220F/TO-220F1 PD 50 W
TO-263 178 W
Junction Temperature TJ +150 °C
Operating Temperature TOPR -55 ~ +150 °C
Storage Temperature TSTG -55 ~ +150 °C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Repetitive Rating: Pulse width limited by maximum junction temperature
3. L = 14.2mH, IAS = 10A, VDD = 50V, RG = 25 Ω Starting TJ = 25°C
4. ISD ≤ 9.5A, di/dt ≤200A/μs, VDD ≤BVDSS, Starting TJ = 25°C
THERMAL DATA
PARAMETER SYMBOL RATING UNIT
Junction to Ambient θJA 62.5 °C/W
TO-220 0.8 °C/W
Junction to Case TO-220F/TO-220F1 θJC 2.5 °C/W
TO-263 0.7 °C/W
D.U.T. +
VDS
- L
RG
Driver VDD
* dv/dt controlled by RG
Same Type * ISD controlled by pulse period
VGS as D.U.T. * D.U.T.-Device Under Test
VGS Period P. W.
D=
(Driver) P.W. Period
VGS= 10V
IRM
L
VDS
BVDSS
IAS
RD
VDD
ID(t)
VDS(t)
VDD
10V D.U.T.
tp
tp Time
Fig. 4A Unclamped Inductive Switching Test Circuit Fig. 4B Unclamped Inductive Switching Waveforms
www.unisonic.com.tw
TYPICAL CHARACTERISTICS
QW-R502-119.E
6 of 8
Power MOSFET
10N60 Power MOSFET
TYPICAL CHARACTERISTICS(Cont.)
Drain-Source Breakdown Voltage,
(Normalized)
Maximum Safe Operating Area Maximum Drain Current vs. Case Temperature
2
10 10
Operation in this Area is United by RDM
10μs
8
100μs
Drain Current, ID (A)
Drain Current, ID (A)
101 1ms
10ms 6
100ms
DC
4
100
Notes:
1.TC=25℃ 2
2.TJ=150℃
3.Single Pulse
10-1 0 0
10 101 102 103 25 50 75 100 125 150
Drain-Source Voltage, VDS (V) Case Temperature, TC (℃)
D=0.5
0.2 NOTES:
-1 1.ZθJC(t)=2.5D/W Max
10 0.1 2.Duty Factor,D=t1/t2
3.TJW-TC=PDW-ZθJC(t)
0.05
0.02
PDW
0.01
Single pulse
t1
10-2 t2
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.