Unisonic Technologies Co., LTD: 2A, 500V N-Channel Power Mosfet
Unisonic Technologies Co., LTD: 2A, 500V N-Channel Power Mosfet
Unisonic Technologies Co., LTD: 2A, 500V N-Channel Power Mosfet
, LTD
2N50 Preliminary Power MOSFET
DESCRIPTION
1
The UTC 2N50 is an N-channel mode power MOSFET using TO-220F
UTC’s advanced technology to provide customers with planar stripe
and DMOS technology. This technology allows a minimum on-state
resistance and superior switching performance. It also can withstand
high energy pulse in the avalanche and commutation mode.
The UTC 2N50 is generally applied in high efficiency switch mode
power supplies, active power factor correction and electronic lamp
1
ballasts based on half bridge topology.
TO-252
FEATURES
* RDS(ON)= 4.9Ω @ VGS=10V
* High Switching Speed
* 100% Avalanche Tested
SYMBOL
2.Drain
1.Gate
3.Source
ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Lead Free Halogen Free 1 2 3
2N50L-TF3-T 2N50G-TF3-T TO-220F G D S Tube
2N50L-TN3-R 2N50G-TN3-R TO-252 G D S Tape Reel
Note: Pin Assignment: G: Gate D: Drain S: Source
www.unisonic.com.tw 1 of 6
Copyright © 2011 Unisonic Technologies Co., Ltd QW-R502-547.b
2N50 Preliminary Power MOSFET
ABSOLUTE MAXIMUM RATINGS (TC=25°C, unless otherwise specified)
PARAMETER SYMBOL RATINGS UNIT
Drain-Source Voltage VDSS 500 V
Gate-Source Voltage VGSS ±30 V
Continuous (TC=25°C) ID 2 (Note 3) A
Drain Current
Pulsed (Note 2) IDM 8 (Note 3) A
Avalanche Current (Note 2) IAR 2 A
Single Pulsed EAS 82 mJ
Avalanche Energy
Repetitive (Note 4) EAR 3.3 mJ
TO-220F 23
Power Dissipation (TC=25°C) W
TO-252 50
PD
TO-220F 0.18
Derate above 25°C W/°C
TO-252 0.4
Junction Temperature TJ +150 °C
Storage Temperature TSTG -55~+150 °C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Repetitive Rating: Pulse width limited by maximum junction temperature
3. Drain current limited by maximum junction temperature
4. Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2%
THERMAL DATA
PARAMETER SYMBOL RATINGS UNIT
TO-220F 62.5
Junction to Ambient θJA °C/W
TO-252 110
TO-220F 5.5
Junction to Case θJC °C/W
TO-252 2.5
VGS
Same Type
as DUT
QG
12V
10V
200nF
50kΩ VDS QGS QGD
300nF
VGS
DUT
3mA
Charge
VDS EAS= 1
2 LIAS
2 BVDSS
BVDSS-VDD
RG BVDSS
ID
L IAS
10V ID(t)
tP DUT
VDD VDD VDS(t)
Time
tP
Unclamped Inductive Switching Test Circuit Unclamped Inductive Switching Waveforms
DUT +
RG VDS
L
-
ISD
VGS
VDD
Driver
Same Type
as DUT
dv/dt controlled by RG
ISD controlled by pulse period
IRM
VDS
(DUT) Body Diode Recovery dv/dt
VSD VDD
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.