Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 146 views

    31repition Method

    Uploaded by

    Eng Osama Mahmoud
    This document describes the repetition method for measuring horizontal angles using a theodolite. The method involves repeatedly adding the same angle mechanically over multiple repetitions, usually six total, with three repetitions on each face of the instrument. The accumulated reading is then divided by the number of repetitions to obtain the precise measured value of the angle, allowing for a finer degree of accuracy than the instrument's least count.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    31repition Method

    Uploaded by

    Eng Osama Mahmoud
    146 views3 pages
    This document describes the repetition method for measuring horizontal angles using a theodolite. The method involves repeatedly adding the same angle mechanically over multiple repetitions, usually six total, with three repetitions on each face of the instrument. The accumulated reading is then divided by the number of repetitions to obtain the precise measured value of the angle, allowing for a finer degree of accuracy than the instrument's least count.

    Original Title

    31Repition Method

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the repetition method for measuring horizontal angles using a theodolite. The method involves repeatedly adding the same angle mechanically over multiple repetitions, usually six total, with three repetitions on each face of the instrument. The accumulated reading is then divided by the number of repetitions to obtain the precise measured value of the angle, allowing for a finer degree of accuracy than the instrument's least count.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    146 views3 pages

    31repition Method

    Uploaded by

    Eng Osama Mahmoud
    This document describes the repetition method for measuring horizontal angles using a theodolite. The method involves repeatedly adding the same angle mechanically over multiple repetitions, usually six total, with three repetitions on each face of the instrument. The accumulated reading is then divided by the number of repetitions to obtain the precise measured value of the angle, allowing for a finer degree of accuracy than the instrument's least count.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    ii) Repetition Method.

    This method is used for very accurate A B


    work. In this method ,the same angle
    is added several times mechanically
    and the correct value of the angle is
    obtained by dividing the accumulated
    reading by the no. of repetitions.
    The No. of repetitions made usually in
    o
    this method is six, three with the face
    left and three with the face right .In HORIZONTAL ANGLE AOB
    this way ,angles can be measured to a
    finer degree of accuracy than that
    obtainable with the least count of the
    vernier.
    To measure horizontal angle by A B
    repetitions:-
    i) Set up the theodolite at starting point
    O and level it accurately.
    ii) Measure The horizontal angle AOB.
    iii) Loosen the lower clamp and turn the
    o
    telescope clock – wise until the object
    (A) is sighted again. Bisect B HORIZONTAL ANGLE AOB
    accurately by using the upper tangent
    screw. The verniers will now read the
    twice the value of the angle now.
    ii) Repetition Method contd...
    iv) Repeat the process until the angle is
    repeated the required number of times A B
    (usually 3). Read again both verniers .
    The final reading after n repetitions
    should be approximately n X (angle).
    Divide the sum by the number of
    repetitions and the result thus obtained
    gives the correct value of the angle AOB.
    o
    v) Change the face of the instrument.
    HORIZONTAL ANGLE AOB
    Repeat exactly in the same manner and
    find another value of the angle AOB. The
    average of two readings gives the
    required precise value of the angle AOB.

    You might also like