Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 94 views

    Qashqai 1º PDF

    Uploaded by

    Marc Amores
    The diagnostic procedure involves 5 steps to diagnose a B27DC DTC for the steering lock power supply: 1) Check the voltage supply to the steering lock unit, 2) Check the steering lock power supply circuit, 3) Replace the BCM if the circuit is good, 4) Replace the steering lock unit if the problem persists, 5) Check for intermittent issues if replacing did not fix it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Qashqai 1º PDF

    Uploaded by

    Marc Amores
    94 views2 pages
    The diagnostic procedure involves 5 steps to diagnose a B27DC DTC for the steering lock power supply: 1) Check the voltage supply to the steering lock unit, 2) Check the steering lock power supply circuit, 3) Replace the BCM if the circuit is good, 4) Replace the steering lock unit if the problem persists, 5) Check for intermittent issues if replacing did not fix it.

    Original Title

    qashqai 1º.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The diagnostic procedure involves 5 steps to diagnose a B27DC DTC for the steering lock power supply: 1) Check the voltage supply to the steering lock unit, 2) Check the steering lock power supply circuit, 3) Replace the BCM if the circuit is good, 4) Replace the steering lock unit if the problem persists, 5) Check for intermittent issues if replacing did not fix it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    94 views2 pages

    Qashqai 1º PDF

    Uploaded by

    Marc Amores
    The diagnostic procedure involves 5 steps to diagnose a B27DC DTC for the steering lock power supply: 1) Check the voltage supply to the steering lock unit, 2) Check the steering lock power supply circuit, 3) Replace the BCM if the circuit is good, 4) Replace the steering lock unit if the problem persists, 5) Check for intermittent issues if replacing did not fix it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    B27DC S/L POWER SUPPLY

    < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM]


    B27DC S/L POWER SUPPLY
    DTC Logic INFOID:0000000010438877

    DTC DETECTION LOGIC

    DTC No. CONSULT screen items DTC detecting condition


    When power is supplied to the steering lock unit even though BCM is not supplying
    B27DC–00 S/L POWER SUPPLY
    power to the steering lock unit.

    POSSIBLE CAUSE
    • Harness or connectors
    (Steering lock unit power supply circuit is open or shorted)
    • BCM
    • Steering lock unit
    FAIL-SAFE
    Inhibit steering lock
    DTC CONFIRMATION PROCEDURE
    1.PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON.
    2. Check DTC in “Self Diagnosis Result” mode of “BCM” using CONSULT.
    Is DTC detected?
    YES >> Refer to SEC-144, "Diagnosis Procedure".
    NO-1 >> To check malfunction symptom before repair: Refer to GI-44, "Intermittent Incident".
    NO-2 >> Confirmation after repair: INSPECTION END
    Diagnosis Procedure INFOID:0000000010438878

    1.CHECK STEERING LOCK UNIT POWER SUPPLY


    Check voltage between steering lock unit harness connector and ground.

    (+)
    Steering lock unit (-) Condition Voltage
    Connector Terminal
    Active 9 - 16 V
    M46 2 Ground Steering lock unit
    Not active 0 - 0.5 V
    Is the inspection result normal?
    YES >> GO TO 5
    NO >> GO TO 2
    2.CHECK STEERING LOCK UNIT POWER SUPPLY CIRCUIT
    1. Disconnect BCM connector and steering lock unit connector.
    2. Check continuity between steering lock unit harness connector and BCM harness connector.

    Steering lock unit BCM


    Continuity
    Connector Terminal Connector Terminal
    M46 2 M87 41 Existed
    3. Check voltage between BCM harness connector and ground.

    BCM
    Continuity
    Connector Terminal Ground
    M87 41 Not existed

    SEC-144
    B27DC S/L POWER SUPPLY
    < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM]
    Is the inspection result normal?
    YES >> GO TO 3 A
    NO >> Repair or replace harness.
    3.REPLACE BCM
    B
    Replace BCM. Refer to BCS-135, "Removal and Installation".
    Is the inspection result normal?
    YES >> INSPECTION END C
    NO >> GO TO 4
    4.REPLACE STEERING LOCK UNIT
    Replace steering lock unit. Refer to SEC-81, "STEERING LOCK UNIT : Work Procedure". D
    Is the inspection result normal?
    YES >> INSPECTION END
    NO >> GO TO 5 E

    5.CHECK INTERMITTENT INCIDENT


    Refer to GI-44, "Intermittent Incident". F

    >> INSPECTION END


    G

    SEC

    SEC-145

    You might also like