L_::oc' _..

-----------~~

KRISHNA ENGINEERS
.~. - _
209, GAJANAN COMPLEX, OPP. TUBE COMPANY, OLD PADRA ROAD, VADODARA:
__ _ .. _ .. __ ,,0 __ .. __ __ -_ .. _ .. - .. - - .. -_- - _ --- _ --- ---- - _- --_ .. _-
390020 PH. NO. 23393Q9
.. -- - - _ _ --- --- --_ _ .. _ .. _ .. ---- -. _ ..

FORM NO.: 11
(Prescribed under rule 61)
Report of examination or test of Pressure Vessel or Plant. Certificate 1110.: GECPLJPV/OOi
F. egistfallun No.
ucence No..

1 Occopier (or owner_l of Premises GAMMON ENGINEERS & CONTRACTORS PVT l mo.
2. Address VILLAGE .1'<AHANVAD1,
TAL: AIIlKLAV: DIST ANAND
3. Name. description ana disonctive number of pressure AiR RECEIVER
SRNQ. 2006 ;DI.NC': 4551D NO. ARTJ0050115944
vessel or plant
'I.5M3
Location: -
4. Name and Aooress of Manufacturer MIS DELAIR INDIA PVT LTD
5. Nature of Process ~Inciuding tert"fi. & pr. parameters) Forstorage & Supply of air at: 0.0 Kt1icm~ AThl Temp
5. Particulars of pressure vessel or plant
(ai Date of Consrucnon 2006
(b) Thickness of Walls Shell & Dish: 5.0 MM
(cIDate on which It was first taken into use Not Known
(d) Safe worklng Pressure recommended by the 1~.O 1<g!cm2
manufacturer
7. Date of
(a) Last external ellCirrinanon i iiOBf20 18 BY SANJA Y PATEL
(b) Last internal examination Inaccessible

(c) Last hyciraulic examnarion 1211212017 BY SAllijAY PATEL

(d) Last ultrasonic or other non-destructive test 11/06/2018 BY SANJA"{ PATEL
8. V\lhether lagging was removed for Purposes of examnation Not Applicable
9. Description of examinations carried out and findings
(aJ Ext. exam (gIVe reason if it is nor carried Out 6 monthly) Good
(b) Int. exam (give reason if it is not carried out annually) Inaccessible
(Cj Hydraulic teSt (give reason If this is not carried out at an Hydraulic test due on ·12i06.£20 19
interval of 2 Years or 4 Years)
(d) Ultra-sonic or other non-destructive test Shell: 5.8 mm; Dish: 5.8 rrm
10. Condition of pressure plants ... tal Vessel, (b) Piping (a) Satisfactory (b) Satisfactory
11. Condition of fitting & appliances
(a) Pressure Gauges Good
(b) Safe~Vaive Good
(0) Stop Valve Good
(d) Reducing valve (Give reason if not necessal)iJ Nil
(e) Additional safet'l valve (req. in case fe!jucing valve is
necessarv)
(f) Other Devices (PI. specify' particjjl3rly in case of Drain \!alve & Pressure Switch provided.
jacKertea vesselsi
1:::. S3fe worl<ing pressure recorrmended after exarr~nation 12.0 Kg/em"
(Speafy the allowances made for condition of worKIng such
as heat corroson etc.) in accordance with the Rules for
pressure vessel?
B. ~a) Repairs (if 3ny) required Not Required
(b) Period within which tne repairs should be executeci Not Applicable
(c) Any other condition which the person making the Nil
examination thinKS If necessary for securing safe worKIng
14. Specif:; reduced wori<ing ~ressure pending repairs Not Applicable
i5 Safe working pressure calculated as per methods given In Not Applicable
Sub-Rule g fer thin walled pressure vessel cr plant.
Pressure Gauge, Safety Vaive to be checked penociically for correct
'I t3. Other observations
functioning.
I certify that on '1OI1212Q18the 5SUfe vessel i plant described above was tnorougl11y cle~meci (so far as its construction permts) made
accessible for thorough ex-al ·!·o . or llch t sts~as were necessary for thorough sxamnation &. that on the said date, I thomughty
~~ thrs pressure vessei a , gs and that the above is a true report of my' examinatIOn.
Name . Bhcr,esh R. .akai:1lya
competent Per50n
cem Nos. . GUJIDISH/CPT/AfO.3.3812013 VAUD UP TO 2511112019
IS6uei:1 By . Director, Indu6trlal Safety & Health, Gujafit state, Ahmedabad.
G!uallflcatlon . B.E. Mechanical
~----------~-----------------~-------------
KRISHNA ENGINEERS
209, GAJANAN COMPLEX, OPP. TUBE COMPANY, OlD PAORA ROAD, VADODARA: 390020 PH. NO. 2339309
·--··-R-e,ji5trailon·i~o,-········----··-·--·-··--···----.---------·.-·- ..... -.FORM.N.(i.~··11···-·-·············--······--·----····--·Ceilificaie-·No.:-G·Ecp"Uwititii-·
LIcence No. . (Prescnbed under rule 61)
Report of examnation or test of Pressure Vessel or Plapt.
1. Occupier (or owner) of Premses GAMMON ENGINEERS & CONTRACTORS PVT l TO_.
2. Address VILLAGE: KAHANVADI,
TAL: ANKLAV; DIST ANAND

3. Name. description and disonctive nul'l'ber of pressure AIR RECEiVER

vessel or plant FA8 NO. [\HJL~ 1t)Q~1; AfR.N-C. 5459
350 LTRS
4. Name and Address of Manufacturer MfsELGI
5. Nature of Process (lnciuding temp. & pr. parameters) Forstorage'l: Supply of air at: 5.0 Kg/cm'" A ™Temp
6. Particulars of pressure vessei or plant
(a) Date of Construction 2006
(b) Thickness of Walls 4.011.111.1
(c) Date on which it was first taken into use Not Known
(d) Sdfe 'V'iorkmg PrE-ssm€' reCOf,-rfl€'nded by the 6.0 ~<gfcr(i"
manufaCtTJrer
7. Date of
(a) LaS[ external examnanon 1ilJ06/20i8 BY SANJAY PATEL
(0) Last intemai e):';;fiinatiofl Inaccessible
{c; laS[ hyciraulic examnacon 15i12f2ili7 BY SANJAY PATEL.
(d) Last unrasomc or other non ...destructrve test ~GI06l20 18 B'{ SAt.JJA~"{PA TEL
8. V'krether lagging was removed for Purposes of examnarion !~ot Applicable
9. Description of examinations carried out and findings
(s) Exr. exam (gIVe reason if it IS not carried out 6 monthly) Good
(b) Int. ex-am (give reason if it is not carried out annually) Inaccessible
(C) Hydraulic teS[ (give reason If this IS not carried out at an Hvdraulictest due on 'ItJf12f2019
interval of 2 Y!?2rS or 4 Years j
(d) Ultra-sonic or other non-ciestrurove test Shell: 3.8 rrm: Dish: 3.9 mm
10. Condition of pressure plants ... (a) Vessel, (b) Piping (a) Satisfactory (b) Satisfactory
11. Condition of filling & appliances
(a) Pressure Gauges Good
(b) Safety Varve Good
(0) Stop Vatve Good
(d) Reducing valve (Give reason if not nec-essary; Nil
(e) Additional safety ·."alve (req. in ';::3se reducing valve is
necessary)
(f) Other Devices (PI. specify particu!artiln case of Drain Valve & Pressure Switch provided.
jacketted vessels)
12. S3fe working pressure rscorrrrended after examination 5.01{gicm'"
(Specify the allowances made for condition of working such
as heat corroson etc.) in accordance vo/iththe Rules for
pressure vessel?
13. (a) Repairs (if 3ny) required Not Required
(b) Period within which the repairs should be executed Not Applicable
(0) Any other condition ~tlich the person makinG tt)e Nil
examnanon thinKs If necessary for securing safe worKIng
. 14. SpeC+J reduced worj(ing pressure pending repairs Not Applicable
1'5 Safe working pressure calculated as per methods given 10 Not Applicable
Sub-Rule 8 for thin ~<Valledpressure vessel or plant.
16. Other observations Pressure Gauge, Safety Vaive to be checked periociically for correct
PJnctoning.
I certIfy that on 1G11212018 the pressure vessel i plant described above was thoroughi'l cleaned (so far as ItS construction perrrits) made
accessible for thorough examination & for sue'!"!te~ as were necessary for thorough exarrdnation & that on the said date, I thoroughly
examined this pressure vessei or plant, including its fittings and that the above is a true report pf my examination.

sl~"ure ~ ,
Name . Bhavesh R. KaRadlya
competent Peri;on
cern, Nos. . GUJJD!SHfCDTlt. ';~o-:- 201.3 VALID UP TO 25fllr:'lJ19
Issued By ""'?'-"'jr, !!Hlllstrlal S31etJ & Ht:aUh, GUI3'~ - ," -,"'
1Q~lfrlS15ection Recomn'lGrfd~'~f,rjiSfbefore :-10.Kl6J2019
 KRISHNA ENGINEERS
............... __ _
209. GAJANAN COMPLB<. OPP. TUBE COMPA~JY, OLD PADRA ROAD, VADODARA:
_ _ •• _ _ _ __ __ _
390020 PH. NO. 2339309
_ __ _ _ 0 .. __ _ _ __ _ ..

FORM NO.: 11
(Prescribed under rule 61)
Regl6tr.ltlon tllo ..
Report of examnation or test of Pressure Vessel or Plant. Cerrificate No.: GECPUPViOG3
ueence No..

1. Occupier (or owner! of Premises GAMMON ENGINEERS & CONTRACTORS PVT lTD .•
2. Address VIllAGE: K~HANVAD!,
TAL: ANKLAV; DISTANAND
3. Name. description ana disonctive number of pressure AiR RECEIVER
v'?ssel or plant SR.NO.155·1353
6.2 Cub! Ft
Location: -
4. Name and Address of Manufacturer Mis FOUITB INDIA
5. Nature of Process (lnciuding remp. & pr. parameters) Forsrorage'" SUPP!-I of air sr: 6.0 Kg/crn:! AThi Temp
5. Particulars of pressure vessel or plant
(aj Date of Construction 1007
r n ...., ..
(b) Thickness of 'l..
'alls u.u 'YIIV'
(c IDate on which it was first taken into use
(d) Safe working Pressure recommended by the 7.0 Kg/em:!
manufacrurer
7. Dare of
(a) LaS[ external examnsnon 1Uf05/2G18 BY SANJAY PATEL
(b) Last internal examnation lnaccsssble
(Cl laS[ hyciraulic examnation 15i1212017 BY SANJAY PATEL
(d) Last ultrasonic or other non-destructive test 10!08f2Q18 BY SA.NJAY PATEL
8. VVherher lagging was removed Tor Purposes of examnation Not Applicable
9. Description of examinations carried Out and findings
(a) Ext. exam (gIVe reason if it is nor carried out 5 monthly) Good
(b) Int. exam (gIVe reason if it is not carried out annually) Inaccessible
(c). Hydraulic teS[ (give reason If this is not carried out at an Hydraulic test due on -ilfl]5jlO 19
interval of 2 Years or 4 Years)
(dj Ultra-sonic or other ncn-ciestructive teS[ Shell: -4.8 rrm Dish: 4.9 rril'Yl
to. Condition of pressure plants ... (a) Vessel, (b) Piping .(a) Satisfactory (b) Satisfactory
11. Condition of fitting & appliances
(a) Pressure Gauges Good
(b) Safety Valve Good
(c) Stop Valve Good
(d) Reducing valve (Give reason if not nec-esS<lrYJ Nil
(e) Additional safety valve (req. in case reducing valve is
necsssarv)
(f) Other Devices (PI. specify particularly in case of Drain Valve &: Pressure S·wite:hprovided.
jacketted vessels)
11. 53fe working pressure recommended after examination 7.Q Kg/em:!
(Specify the allowances made for condition of working such
as heat oorroson etc.) in accordance vilti"! the Rules for
pressure vessel?
13. {a) Repairs (if any) required fIJ ot Required
(b) Period within Which the repairs should be executeci Nor Applicable
(c) Any other condition v¥t,ich the person fl".ai<ing the Nil
exarnnanon minKs If necessary for securing safe won-Jng
14. Specify reduced wo!1<jngpressure pending repairs Not Applicable
15 Safe working pressure calculated as per rnerhods given In Not ApplicablE<
S~J~Rute8 for thin ,vaned pressur~vessel or plant.
16. Other observations Pressure Gauge. Safety Vaive to be checked penodicaUy for correct
functioning.
I cernfy that on 1Qf1212018 the pressure vessel i piam described above was thoroughly deaned (so far as its consrruction permts) made
Ec'(;:ssible for thorough exami~ as were necessary for thorough examination & that on the said date. ! thc.rc,ughiy
~§ffiAP trus pressure vessei ~gS and that the above is a true report of m.j examination.

:::
I;5tRC S~
"" • ~:~~~13 V>JJDUPTO25n1I2O'9
. Director, Irnlu6trlal Safety & Healtn, GUjarat state, AhmedaDad.
t" ~.~o)--<
7:=.,
;.;... \" D\ 3' ~•
. B.E. Mec:hanlcill "" <-
~o