310 100

200 @ 0.3 m O.C.

PRE-FAB STEEL FLEX BEAM

200 X 200 CONCRETE POST

100
(GAUGE 12, t = 2.67 mm)

50

200

250
5D SECTION (POST)
SCALE : NTS

70
DIRECTION OF TRAFFIC

10
SLOTTED HOLES

209
1 PLAN
SCALE : NTS

310 (LAP)
PRE-FAB STEEL FLEX-BEAM (GAUGE 12, t = 2.67 mm)
100 100

200 200 200 55 55 5B FLEX-BEAM END DETAIL

200 X 200 CONCRETE POST
SCALE : NTS

200

149 149
LIMIT STATION

298

10
(SEE CONSTRUCTION PLANS)

1800
800

61

1591
67

209
5D

81
367

296
1000

11430
81

TRAFFIC
3810 3810

67
2 ELEVATION LIMIT STATION
SHOULDER SCALE : NTS (SEE CONSTRUCTION PLANS)
(SHLDR. EDGE)

5C ELEVATION (POST)
BASELINE

SCALE : NTS
SHOULDER EDGE LINE
FLEX BEAM POST
200 X 200 CONCRETE POST

11000
TRAVELWAY EDGE

5A DETAIL
SCALE : NTS
800

PRE-FAB
STEEL FLEX-BEAM 5 FLEX-BEAM DETAIL
5A SCALE : NTS

DIREC 11430
TIO N OF T
RAFFIC
4 PERSPECTIVE VIEW END APPROACH TERMINAL
1000

SCALE : NTS

GENERAL NOTES:
1. MATERIALS AND WORKMANSHIP SHALL COMPLY WITH
STANDARD SPECIFICATIONS FOR HIGHWAYS AND
BRIDGES REVISED 2013. DEPTH CROSS WT. OF WT. OF WT. PER m
TABLE OF FLARE OFFSET
2. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS TYPE OF SECTIONAL WT. PER 1-12'-6" BOLTS FOR OF RAIL
TYPE
3 SECTION 3.
OTHERWISE SPECIFIED.
CONCRETE POST SHALL CONFORM WITH THE
WIDTH
(mm)
CORR.
(mm)
AREA
(sq.cm)
ln.m
(kg)
SECTION ONE PLACE IN PLACE
(kg) (kg) (kg)
LENGTH OFFSET
12 10 8 6 4 2 0
REQUIREMENTS OF CLASS "C" CONCRETE AND 0 0
SCALE : NTS TRAFFIC
REINFORCING STEEL. STANDARD 2 35
4. GAUGE OF FLEX-BEAM GUARDRAIL SHALL BE AS 3.30 76.00 13.00 10.27 43.86 1.50 11.51 11430 mm FLARE / 1905 mm POST SPACING
(GAUGE 12)
INDICATED IN PLAN AND SPECIFICATIONS. 4 135
5. ALL NUTS SHALL BE WELDED TO THE BOLTS AFTER HEAVY DUTY
TIGHTENING. (GAUGE 10)
3.30 76.00 16.50 13.27 56.00 1.50 14.69 6 300 GUARDRAIL SET-OUT STANDARD
6. ALL LAPS OF GUARD RAILS SHALL BE IN THE DIRECTION

7.
OF TRAFFIC FLOW.
PROVIDE ALTERNATING BLACK AND WHITE BAND 1 - 16 X 254 mm POST BOLT, 6 - 16 X 32 mm SPLICE BOLTS, 16 mm WASHERS
8 500
6 INSTALLATION FOR END TERMINAL
10 850
STRIPE REFLECTORIZED TO APPLIED ON FRONT FACE MULTIPLY BY LENGTH AND ADD 18.41 kg (FOR 2 END WINGS AND BOLTS) SCALE : NTS
OF FLEX-BEAM FOR ADDED SAFETY AND MATERIAL TO OBTAIN TOTAL WEIGHT OF FLEX BEAM INSTALLED ON 3.81 m ON CENTERS. 12 1200
PROTECTION AGAINST RUST.

SURVEYED BY: PREPARED BY:

REPUBLIC OF THE PHILIPPINES PROJECT & LOCATION: SHEET CONTENTS: CHECKED & SUBMITTED BY: RECOMMENDING APPROVAL: APPROVED:
REGION XII
DEPARTMENT OF PUBLIC WORKS & HIGHWAYS ARLYN E. SABES,GE ANA MARIA B. RESMENIA
ENGINEER II ENGINEER II
OFFICE OF THE DISTRICT ENGINEER CONSTRUCTION OF CONCRETE ROAD-SAYRE ROAD-SITIO
RXII
COTABATO SECOND ENGINEERING DISTRICT TAWAGON-KILAMBAY, BRGY. KIBUDTUNGAN
CONNECTING TO SALAMA, BANISILAN ROAD IN SUPPORT OF COCONUT
STANDARD FLEX BEAM DESIGNED:
BARTOLOME T. PAGADUAN ELISEO L. OTOC, MPA
GR
PLANNING AND DESIGN SECTION GUARDRAIL NORMAN C. VILLAREAL, MPA
VILLARICA, MIDSAYAP, COTABATO PROCESSING INDUSTRY (TREE LIFE ORGANIC COCO SUGAR)
CARMEN, COTABATO REDEN M. AVANCE ABDULSANNY M. MANGKONG ENGINEER III ASSISTANT DISTRICT ENGINEER OIC-DISTRICT ENGINEER COT2DEO
09 29
ENGINEER II ENGINEERING AIDE CHIEF, PLANNING AND DESIGN SECTION