Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    Drill: Cv. Shuuken Precision Toolsindo

    Uploaded by

    Erizal
    This document discusses important aspects of drill sharpening including point angle, chisel edge angle, helix angle, and total clearance. It provides tables with recommended point angles for different materials as well as helix angles for various drill diameters and material types. Tool tolerances for drill diameter are also specified with allowable upper and lower bounds.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Drill: Cv. Shuuken Precision Toolsindo

    Uploaded by

    Erizal
    48 views7 pages
    This document discusses important aspects of drill sharpening including point angle, chisel edge angle, helix angle, and total clearance. It provides tables with recommended point angles for different materials as well as helix angles for various drill diameters and material types. Tool tolerances for drill diameter are also specified with allowable upper and lower bounds.

    Original Title

    DRILL.doc

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses important aspects of drill sharpening including point angle, chisel edge angle, helix angle, and total clearance. It provides tables with recommended point angles for different materials as well as helix angles for various drill diameters and material types. Tool tolerances for drill diameter are also specified with allowable upper and lower bounds.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    48 views7 pages

    Drill: Cv. Shuuken Precision Toolsindo

    Uploaded by

    Erizal
    This document discusses important aspects of drill sharpening including point angle, chisel edge angle, helix angle, and total clearance. It provides tables with recommended point angles for different materials as well as helix angles for various drill diameters and material types. Tool tolerances for drill diameter are also specified with allowable upper and lower bounds.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 7

    CV.

    SHUUKEN PRECISION TOOLSINDO

    DRILL
    BAGIAN-BAGIAN DRILL
    HAL-HAL PENTING DALAM PENGASAHAN DRILL

    Point Angle (Sudut depan)

    Chisel Edge Angle

    Helix Angle

    Total Clearance
     POINT ANGLE (SUDUT DEPAN)
     Untuk standart drill sudut depan ( Point Angle ) adalah 118 
     Tabel I Point Angle menurut FMS
     Tabel II Point Angle menurut Production Technology
    TABEL I
    Jenis Material Point Angle
    Carbon Steel, Low Alloy Steel 130 
    High Alloy Steel ( Hardening Steel ) 140 
    Comon Cast Iron ( Sampai FC 200 ) 120 
    High Cast Iron , Alloy Cast Iron 130 
    Logam Non Besi 120 
    Aluminium 130 
    TABEL II
    JENIS MATERIAL POINT ANGLE
    Steel & Cast Iron 118 
    Stainless Steel 140 
    Austenitic Steel 140 
    Cast Iron 118 
    Malleable Cast Iron 118 
    Brass 118 
    Copper 140 
    Aluminium alloys short & long chip type 140 
    Magnesium alloys 140 
    Nickel 118 
    Zinc alloys 118 
    Moulded plastics 80 
    Laminated plastics 80 
    Celluoid 140 
    Hard rubber &thin plastic material 80 
    Marble, slate & carbon 80 
     CHISEL EDGE ANGLE
     HELIX ANGLE

    Diameter Recommended Helix Angle


    over Up To Normal Hard & Brittle Soft Material
    Material Material
    - 0.6 16 3 - -
    0.6 1.0 18 3 - -
    1.0 3.2 20 3 10  2 35 5
    3.2 5.0 22 3 12  3 35 5
    5.0 10. 25 3 13  3 40 5
    10.0 - 30 3 13  3 40 5
     TOTAL CLEARANCE

    o Tooleransi untuk diameter drill

    Diameter Batas Toleransi


    Dari Sampai Atas Bawah
    - 3 0 0.014
    3 6 0 0.018
    6 10 0 0.022
    10 18 0 0.027
    18 30 0 0.033
    30 50 0 0.039
    50 80 0 0.046

    You might also like