Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    P C 1 Ei P D Esise Ecig Ei 1) 5 / (

    Uploaded by

    Allen Robert Wagan
    This document summarizes the design of a rectangular reinforced concrete column with the following properties: - Height of 5600mm, width of 400mm, length of 300mm - Concrete compressive strength of 20.7MPa, reinforcement yield strength of 417MPa - Required factored moment of 90kNm and axial load of 560kN - Calculations are shown to check the steel ratio, moment capacity, slenderness, and tie requirements to verify the column design meets code standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    P C 1 Ei P D Esise Ecig Ei 1) 5 / (

    Uploaded by

    Allen Robert Wagan
    30 views2 pages
    This document summarizes the design of a rectangular reinforced concrete column with the following properties: - Height of 5600mm, width of 400mm, length of 300mm - Concrete compressive strength of 20.7MPa, reinforcement yield strength of 417MPa - Required factored moment of 90kNm and axial load of 560kN - Calculations are shown to check the steel ratio, moment capacity, slenderness, and tie requirements to verify the column design meets code standards.

    Original Description:

    sample computation of reinforced concrete column

    Original Title

    c1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a rectangular reinforced concrete column with the following properties: - Height of 5600mm, width of 400mm, length of 300mm - Concrete compressive strength of 20.7MPa, reinforcement yield strength of 417MPa - Required factored moment of 90kNm and axial load of 560kN - Calculations are shown to check the steel ratio, moment capacity, slenderness, and tie requirements to verify the column design meets code standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views2 pages

    P C 1 Ei P D Esise Ecig Ei 1) 5 / (

    Uploaded by

    Allen Robert Wagan
    This document summarizes the design of a rectangular reinforced concrete column with the following properties: - Height of 5600mm, width of 400mm, length of 300mm - Concrete compressive strength of 20.7MPa, reinforcement yield strength of 417MPa - Required factored moment of 90kNm and axial load of 560kN - Calculations are shown to check the steel ratio, moment capacity, slenderness, and tie requirements to verify the column design meets code standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    DESIGN OF RECTANGULAR COLUMN

    DATA C-1
    Height of the Column = 5600 mm
    Width = 400 mm
    Length = 300 mm
    Cover = 40 mm
    Concrete mix Fc' = 20.7 N/mm2
    reinforcement (fy) = 417 N/mm2
    Factored Moment (Mu) = 90 kNm
    Force (Pu) = 560 kN

    kL/r = 62.22222222 34-12(M1/M2) 22


    slenderness must be considered
    Mc=SbM2b + SsM2s Assume N = 4 each row
    M2s = 0 size = 20 mm
    Ss = 1 Ties = 10 mm
    M2b = 90 Max MuDL = 12 kNm
    M = 19.2
    OK!
    Cm
    b  Cm 1
    P
    1 u Pu 800 400
    Pc

     2 EI ( EcIg / 5)  EsIse
    Pc  EI 
    ( kLu ) 2 1  d
    300

    bh 3 = 900000000 mm4 Assume 12 pcs of 20 mm dia


    Ig 
    12 As = 3769.911185

    Ec  4700 f ' c = 21383.70875 MPa

    Es = 200000 MPa

    Ise=ΣAsy2 about centroidal


    As = 1256.637062 mm2 on each row
    y= 110 mm
    Ise = 30410616.89 mm4

    Max . factoredde adloadmome nt


    d  = 0.133333333
    Totalfacto redmoment

    ( EcIg / 5)  EsIse = 8.76282E+12 Nmm2


    EI 
    1  d
     2 EI
    Pc  = 2757829.175 N
    ( kLu ) 2 = 2757.829175 kN

    Cm
    b 
    P = 1.408615833 OK!
    1 u
    Pc

    Mc=SbM2b + SsM2s Mc = 126.775425

    Mc = Mu
    Mu
    e = 0.226384688 m
    Pu
    e/h = 0.754615625
    Y = 0.733333333
    Pu
    Pn  = 800 kN

    Pn
    = 4.666666667 MPa
    Ag
    As = PgAg
    Pg = 0.031415927
    using Interaction Diagram
    Pn
    = 6.5 Mpa
    Ag
    Pn = 1114285.714 N
    = 1114.285714 kN

    1114.285714 .> 800 kN OK!

    1 Check the steel ratio for the longitudinal steel


    pg = 0.031415927

    0.01 < 0.031415927 < 0.08 OK!

    2 Inspection of the cross-section shows that it complies


    with the code on the minimum number of bars, clear
    distances between bars and concrete covering.

    For Shorter Span


    • Clear spacing or rebar = 40 mm OK!

    3 Check the ties:


    a) Tie size of 10mm dia is OK!
    b) Spacing of ties:
    48 tie dia = 48(10) = 480
    16 x bar dia = 320

    but use spacing of 200 mm oc rise

    You might also like