Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Pine-Puree GEN-SPECS

    Uploaded by

    Mark Anthony Capito Años
    This document provides general specifications for the Pine Puree Room project located at the DMPI compound in Bugo, Cagayan de Oro City. The specifications include requirements for concrete and masonry, steel works, reinforcing steel bars, roofing, finishing, and plumbing. The specifications were prepared by Registered Civil Engineer Cherrie P. Gamolo for Del Monte Philippines, Inc.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Pine-Puree GEN-SPECS

    Uploaded by

    Mark Anthony Capito Años
    18 views4 pages
    This document provides general specifications for the Pine Puree Room project located at the DMPI compound in Bugo, Cagayan de Oro City. The specifications include requirements for concrete and masonry, steel works, reinforcing steel bars, roofing, finishing, and plumbing. The specifications were prepared by Registered Civil Engineer Cherrie P. Gamolo for Del Monte Philippines, Inc.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides general specifications for the Pine Puree Room project located at the DMPI compound in Bugo, Cagayan de Oro City. The specifications include requirements for concrete and masonry, steel works, reinforcing steel bars, roofing, finishing, and plumbing. The specifications were prepared by Registered Civil Engineer Cherrie P. Gamolo for Del Monte Philippines, Inc.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    18 views4 pages

    Pine-Puree GEN-SPECS

    Uploaded by

    Mark Anthony Capito Años
    This document provides general specifications for the Pine Puree Room project located at the DMPI compound in Bugo, Cagayan de Oro City. The specifications include requirements for concrete and masonry, steel works, reinforcing steel bars, roofing, finishing, and plumbing. The specifications were prepared by Registered Civil Engineer Cherrie P. Gamolo for Del Monte Philippines, Inc.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    GENERAL SPECIFICATIONS

    PROJECT : PINE PUREE ROOM


    LOCATION : DMPI COMPOUND BUGO, CAGAYAN DE ORO CITY
    OWNER : DEL MONTE PHIL. INC.

    1. Concreting and Masonry


    1.1 Structural concrete such as footings, column, beams, and slabs shall be
    3000psi concrete at 28 days.
    1.2 Plasters and mortars shall be 3000psi or 12 bags of 40 kg cement per One (1)
    cubic meter of sand
    1.3 100mm concrete hollow blocks shall be non-load bearing however all cells
    must be filled with mortar described in section 1.3.
    1.4 All Concrete Mix shall be clear, sharp and well graded, and free from
    injurious amount of dust, lumps, shale, alkali, surface coatings and organic
    matter.

    2. Steel works
    Materials:
    2.1 All structural steel i.e. purlins, angles and the like shall have minimum yield
    strength of 275 MPa.
    2.2 All structural steel shall be painted with red oxide primer and 2-coats white
    QDE (Welcoat).
    2.3 Welding electrodes shall conform to AWS A-5.1 or A-5.5, E-60 electrodes.
    Electrodes for dissimilar metal (SS and MS) shall be all state 275 or approved
    equivalent.
    2.4 Welding of structural members in shop and in field shall be done only by
    certified and experienced welder.
    2.5 Surfaces to be welded shall be free from loose sides, rust, grease and other
    foreign materials that will impair the soundness of the weld.

    3. Reinforcing Steel Bars


    3.1 Reinforcing steel bars shall have minimum yield strength of 275 MPa
    3.2 Reinforcing steel bars shall not be welded.
    3.3 Reinforcing steel bars shall be mechanically bent. Heating is not allowed.
    3.4 Reinforcing steel bars shall be secured into its position by means of ga.16 G.I.
    tie wires.
    3.5 Hooks, bends and splices shall conform to the ACI code requirements.

    4. Roofing works
    4.1 Roofing shall be 0.40mm thick pre painted corrogated GI Sheets
    4.2 Bended accessories like gutter, wall flashing shall be galvalume 55 sheets
    bended as indicated on the plan.
    5. Finishing
    5.1 Floor
    5.1.1 Flooring shall be coated with Alphatic 661 floor lamination system
    color Delmonte beige.

    5.2 Walls and Partitions


    5.2.1 Masonry wall plastered both sides with solvent base paint.

    5.3 Doors and windows


    5.3.1 All windows shall Polycarbonate sheet in aluminum frame.
    5.3.2 Entrance door shall be swing door SS (1 panel) with complete locking
    system.
    5.3.3 Hardware such as doorknobs, hinges and handles shall be stainless
    steel.
    5.3.4 Door curtain shall be acrylic vinyl 200mm x 3mm color yellow.

    5.4 Ceiling
    5.4.1 150mm wide PVC spandrel on light metal frames.

    6. Plumbing works
    All piping materials, fixtures and fittings accessories whether specifically mention
    or not but necessary for the completion of the project shall be furnished by the
    contractor.

    6.1 All materials shall be of quality made by reputable manufacturers, free from
    defects, and shall be true, smooth and cylindrical, their inner and outer
    surfaces being as nearly as concentric as practicable.
    6.2 All waste pipes shall be 2” dia, series 1000 uPVC Pipe.
    6.3 Water Supply Pipe - shall be ½” dia GI pipe, Schedule 40 and connection
    shall be threaded. Welding connection is not allowed.
    6.4 Wash Sink- Stainless Steel Single compartment.
    6.5 Floor Drain- Stainless Steel Drain with detachable strainer (4” x 4”).
    6.6 Lavatory – Glaze tile 20cm x 20cm white (mariwasa) with mounting
    accessories.

    PREPARED BY:

    CHERRIE P. GAMOLO
    Registered Civil Engineer
    Reg. No.: 0036771
    PTR No.: 2328708
    Date: Jan. 9, 2013
    Place: Cagayan de Oro City

    CLEO P. LOPEZ
    DMPI – Authorized Representative
    Res. Cert: 23616965
    TIN No. : 104-968-377

    GENERAL SPECIFICATIONS
    FOR:

    PINE PUREE ROOM

    Prepared for: DEL MONTE PHILIPPINES, INC.


    Bugo, Cagayan de Oro City

    Prepared by:

    CHERRIE P. GAMOLO
    Registered Civil Engineer
    Reg. No.: 0036771
    PTR No.: 2328708
    Date: Jan. 9, 2013
    Place: Cagayan de Oro City

    You might also like