Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Storm Drainage Piping

    Uploaded by

    Reza
    This document provides specifications for storm drainage piping within buildings at Los Alamos National Laboratory. It outlines acceptable materials for above ground piping including cast iron, PVC, and copper piping. It also specifies requirements for roof drains, cleanouts, installation, testing, and support of the storm drainage system. The document is intended for ML-3 and ML-4 projects and requires additional review and requirements for lower level projects.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Storm Drainage Piping

    Uploaded by

    Reza
    41 views3 pages
    This document provides specifications for storm drainage piping within buildings at Los Alamos National Laboratory. It outlines acceptable materials for above ground piping including cast iron, PVC, and copper piping. It also specifies requirements for roof drains, cleanouts, installation, testing, and support of the storm drainage system. The document is intended for ML-3 and ML-4 projects and requires additional review and requirements for lower level projects.

    Original Title

    STORM DRAINAGE PIPING

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for storm drainage piping within buildings at Los Alamos National Laboratory. It outlines acceptable materials for above ground piping including cast iron, PVC, and copper piping. It also specifies requirements for roof drains, cleanouts, installation, testing, and support of the storm drainage system. The document is intended for ML-3 and ML-4 projects and requires additional review and requirements for lower level projects.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views3 pages

    Storm Drainage Piping

    Uploaded by

    Reza
    This document provides specifications for storm drainage piping within buildings at Los Alamos National Laboratory. It outlines acceptable materials for above ground piping including cast iron, PVC, and copper piping. It also specifies requirements for roof drains, cleanouts, installation, testing, and support of the storm drainage system. The document is intended for ML-3 and ML-4 projects and requires additional review and requirements for lower level projects.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SECTION 15160

    STORM DRAINAGE PIPING

    **************************************************************************
    LANL MASTER CONSTRUCTION SPECIFICATION
    When editing to suit project, author shall add job-specific requirements and delete only those
    portions that in no way apply to the activity (e.g., a component that does not apply). To seek a
    variance from applicable requirements, contact the Engineering Standards Manual (ESM)
    Mechanical POC.

    When assembling a specification package, include applicable specifications from all Divisions,
    especially Division 1, General Requirements.

    Delete information within “stars” during editing.

    Refer to Specification 02630 for site storm drainage system.

    Specification developed for ML-3 / ML-4 projects. For ML-1 / ML-2, additional requirements and
    QA reviews are required.
    ****************************************************************************

    PART 1 GENERAL

    1.1 SECTION INCLUDES

    A. Building storm drainage piping, fittings, and accessories within building wall.

    1.3 SUBMITTALS

    A. Submit the following in accordance with Section 01330, Submittal Procedures:

    1. Catalog data on pipe materials, fittings and accessories.

    2. Installation instructions for accessories.

    PART 2 PRODUCTS

    2.1 PRODUCT OPTIONS AND SUBSTITUTIONS

    A. Comply with Section 01630, Product Options and Substitutions.

    2.2 STORM DRAINAGE PIPING, ABOVE GROUND

    A. Cast Iron Pipe and Fittings: CISPI 301 hubless, service weight.
    1. Joints: CISPI 310, neeoprene gaskets and stainless steel clamp/shield
    assemblies.

    LANL Project I.D. [ ] Storm Drainage Piping


    [Rev. 2, July 16, 2003] 15160-1
    B. Cast Iron Pipe and Fittings: ASTM A74, service weight.

    1. Joints: Bell and spigot, ASTM C564, rubber gaskets.

    C. PVC Pipe and Fittings: ASTM D3034, SDR 35.


    1. Joints: Bell and spigot, ASTM D3212, rubber gaskets.

    D. PVC Pipe and Fittings: ASTM D3034 or ASTM D2665.


    1. Joints: Solvent weld, ASTM D2855, with ASTM D2564 solvent cement.

    2.3 ROOF DRAINS

    A. Manufacturer: J.R. Smith Mfg. Co.

    B. [Select roof drains determined by roof construction, expected rainfall, etc. Refer to
    manufacturer’s catalog data for selection criteria.]

    2.4 CLEANOUTS

    A. Manufacturer: J.R. Smith Mfg. Co.

    B. [Select cleanouts to suit project. Refer to manufacturer’s catalog data for selection
    criteria.]

    PART 3 EXECUTION

    3.1 EXAMINATION

    A. Verify excavations are to required grade. Do not over excavate.

    3.2 PREPARATION

    A. Ream pipe ends and remove burrs.

    3.3 INSTALLATION

    A. Comply with Uniform Plumbing Code (IAPMO).

    B. Extend cleanouts to finish floor or wall surface. Lubricate threaded cleanout plugs
    with non-hardening thread lubricant. Ensure clearance at cleanout for snaking
    drainage system.

    C. Install floor cleanouts at elevation to accommodate finished floor.

    D. Route piping in orderly manner and maintain gradient. Route parallel and
    perpendicular to walls.

    LANL Project I.D. [ ] Storm Drainage Piping


    [Rev. 2, July 16, 2003] 15160-2
    E. Install piping penetrating roofed areas to maintain integrity of roof assembly.

    F. Install bell and spigot pipe with bell end upstream.

    G. Sleeve and caulk pipes penetrating exterior walls or interior bearing walls. Provide
    waterproof installation for exterior walls. Provide UL/FM approved through-
    penetration firestop system when penetrating fire-rated barriers (i.e., walls, floors,
    etc.).

    H. Test piping system with water in accordance with Section 15992.

    I. Label piping in accordance with Section 15075.

    J. Support piping in accordance with Section 15060.

    K. Provide splash blocks under downspout nozzle when required to control erosion.

    END OF SECTION

    ************************************************
    Do not delete the following information:
    ************************************************

    FOR LANL USE ONLY


    This project specification is based on LANL Master Construction Specification Rev. 2,
    July 16, 2003

    LANL Project I.D. [ ] Storm Drainage Piping


    [Rev. 2, July 16, 2003] 15160-3

    You might also like