Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 233 views

    XBA-SAR4 (Pulse+MDB+ICT+Parallel A3) PDF

    Uploaded by

    Vasil Stoyanov
    This document summarizes the settings for the option switch of the XBA-SAR4 bill acceptor. The switch has 8 positions that are used to select the supported bill values (SAR) of 1, 5, 10, 20 bills and the communication protocol of Pulse, MDB, ICT104U, GPT or ICT104V. Position 5-8 are also used to select the operating mode between pulse and credit mode, scaling factor, decimal point position and whether to connect to a coin changer or ICT VCCS converter board.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    XBA-SAR4 (Pulse+MDB+ICT+Parallel A3) PDF

    Uploaded by

    Vasil Stoyanov
    233 views1 page
    This document summarizes the settings for the option switch of the XBA-SAR4 bill acceptor. The switch has 8 positions that are used to select the supported bill values (SAR) of 1, 5, 10, 20 bills and the communication protocol of Pulse, MDB, ICT104U, GPT or ICT104V. Position 5-8 are also used to select the operating mode between pulse and credit mode, scaling factor, decimal point position and whether to connect to a coin changer or ICT VCCS converter board.

    Original Title

    XBA-SAR4(Pulse+MDB+ICT+Parallel A3).pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the settings for the option switch of the XBA-SAR4 bill acceptor. The switch has 8 positions that are used to select the supported bill values (SAR) of 1, 5, 10, 20 bills and the communication protocol of Pulse, MDB, ICT104U, GPT or ICT104V. Position 5-8 are also used to select the operating mode between pulse and credit mode, scaling factor, decimal point position and whether to connect to a coin changer or ICT VCCS converter board.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    233 views1 page

    XBA-SAR4 (Pulse+MDB+ICT+Parallel A3) PDF

    Uploaded by

    Vasil Stoyanov
    This document summarizes the settings for the option switch of the XBA-SAR4 bill acceptor. The switch has 8 positions that are used to select the supported bill values (SAR) of 1, 5, 10, 20 bills and the communication protocol of Pulse, MDB, ICT104U, GPT or ICT104V. Position 5-8 are also used to select the operating mode between pulse and credit mode, scaling factor, decimal point position and whether to connect to a coin changer or ICT VCCS converter board.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    XBA-SAR4 (Pulse/MDB/ICT104U/GPT/ICT104V)

    XBA-SAR4 Option Switch Settings


    FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8

    Supported bill SAR 1, 5, 10, 20 4bills. Inhibit Active HIGH ON

    Inhibit Active LOW OFF

    FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 Reserved ON

    Reject SAR 1 ON Reserved OFF

    Accept SAR 1 OFF Reserved ON

    Reserved OFF
    Reject SAR 5 ON
    Reserved ON
    Accept SAR 5 OFF
    Reserved OFF

    Reject SAR 10 ON Pulse Mode MDB Mode ICT104V Mode


    Scaling Factor (SF) = 100
    Accept SAR 10 OFF Credit-Pulse Normal HIGH Decimal Point Position (DPP) = 2
    Connect with coin changer ON
    Scaling Factor (SF) = 1 Connect with ICT VCCS
    Credit-Pulse Normal LOW Decimal Point Position (DPP) = 0 converter board
    OFF
    Reject SAR 20 ON
    Pulse Mode ON
    Accept SAR 20 OFF
    Other Mode OFF

    High Acceptance ON Pulse Mode Other Mode


    (Note.4)

    High Security OFF 1 pulse / SAR 1 MDB Mode OFF OFF

    Disable Bill Reject 4 Times ON


    2 pulse / SAR 1 GPT Mode OFF ON
    BA Stop By 30 Sec
    Enable Bill Reject 4 Times
    4 pulse / SAR 1 ICT104U Mode ON OFF
    OFF
    BA Stop By 30 Sec 20 pulse / SAR 1 ICT104V Mode ON ON
    Stack Banknote when Power-up ON

    Reject Banknote when Power-up OFF

    Reserved ON This dip switch is located


    Reserved OFF
    on the CPU board, L

    remove the CPU board


    This dip switch is located at the side of XBA. (1)
    cover first.
    Currency Assign Data DIP Switch

    Interface
    Bill value ICT104U GPT ICT104V Pulse MDB
    LED
    BV1 SAR 1 SAR 1 SAR 1 SAR 1 SAR 1
    BV2 SAR 5 SAR 5 SAR 5 SAR 5 SAR 5
    BV3 SAR 10 SAR 10 SAR 10 SAR 10 SAR 10
    BV4 SAR 20 SAR 20 SAR 20 SAR 20 SAR 20 Note：(1) Please reset the bill acceptor after set the dip switch.
    (2) Dip switches 1 to 5 are only used for pulse protocol.
    (3) Calibrate card
    (2) (4) High acceptance mode will increasing accepting rate, however, it will
    reduce the security level of Bill Acceptor.
    DIP Switch
    2014 International Currency Technologies Corporation
    Vol. 3.0 Part Number : SWS6SA430-R

    You might also like