Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • دورة مياه 3508

    Uploaded by

    ali
    68 views3 pages
    caterpillar 3500 engine cooling system

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    caterpillar 3500 engine cooling system

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    68 views3 pages

    دورة مياه 3508

    Uploaded by

    ali
    caterpillar 3500 engine cooling system

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    3508 Industrial Engine 95Y00644-01064(SEBP1575 - 51) - Systems & Components Page 1 of 3

    Shutdown SIS

    Previous Screen

    Product: INDUSTRIAL ENGINE


    Model: 3508 INDUSTRIAL ENGINE 95Y00967
    Configuration: 3508 Industrial Engine 95Y00644-01064

    Systems Operation
    3500 Industrial Engine Attachments
    Media Number -SENR2354-04 Publication Date -01/10/2009 Date Updated -08/10/2009

    i01696619

    Cooling System
    SMCS - 1350

    Illustration 1 g00874213

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 5/3/2019
    3508 Industrial Engine 95Y00644-01064(SEBP1575 - 51) - Systems & Components Page 2 of 3

    (1) Water manifold

    (2) Tube to water cooled turbocharger and exhaust manifold

    (3) Aftercooler

    (4) Expansion tank

    (5) Cylinder head

    (6) Cylinder block

    (7) Oil cooler

    (8) Tube to aftercooler

    (9) Water pump

    (10) Tube to water pump

    (11) Tube to expansion tank

    (12) Water temperature regulator housing

    (13) Inlet from heat exchanger

    (14) Outlet to heat exchanger

    Coolant goes into water pump (9) through elbow (10). The elbow connects to expansion tank (4). The
    coolant flow is divided at the outlet of the water pump. Part of the coolant flow is sent to aftercooler
    (2) through tube (8). The remainder of the coolant goes through engine oil cooler (7) .

    Note: There is one opening on the pump outlet so that a remote pump can be connected to the system.
    The remote pump can be used if there is a failure of the pump on the engine.

    Coolant that is sent to the aftercooler goes through the aftercooler core. The coolant is sent by an
    elbow into a passage in cylinder block (6). The passage is near the center of the vee at the rear of the
    cylinder block.

    The coolant that is sent to the engine oil cooler goes through the engine oil cooler. The coolant flows
    into the water jacket of the cylinder block at the right rear cylinder. The coolant goes to both sides of
    the cylinder block through distribution manifolds. The distribution manifolds are connected to the
    water jacket of all the cylinders. The main distribution manifold is located just above the main bearing
    oil gallery.

    The coolant flows upward through the water jackets. The coolant flows around the cylinder liners
    from the bottom to the top. The hottest temperature is near the top of the cylinder liners. The water
    jacket is smaller near the top of the cylinder liners. This shelf causes the coolant to flow faster for
    better liner cooling.

    Coolant from the top of the liners goes into cylinder head (5). The cylinder head sends the coolant
    around the hottest parts. Coolant then goes to the top of the cylinder head. The coolant goes out
    through an elbow at each cylinder head and into water manifold (1) at each bank of cylinders. Coolant
    goes through the water manifold to water temperature regulator housing (12) .

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 5/3/2019
    3508 Industrial Engine 95Y00644-01064(SEBP1575 - 51) - Systems & Components Page 3 of 3

    The water temperature regulator housing has an upper flow and a lower flow section. The water
    temperature regulator housing uses four temperature regulators. The sensing bulbs of the four
    temperature regulators are in the coolant in the lower section of the housing. Before the water
    temperature regulators open, coolant is sent through tube (11) back to the expansion tank. As the
    temperature of the coolant increases and the water temperature regulators start to open, the coolant
    flow in the bypass tube is restricted. Most of the coolant is sent through the outlet to the heat
    exchanger.

    The total system capacity will depend on the amount of coolant in the cylinder block as well as the
    amount of coolant in the heat exchanger.

    Copyright 1993 - 2019 Caterpillar Inc. Fri May 3 23:42:24 UTC+0200 2019
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 5/3/2019

    You might also like