5991-1059EN LC - Supplycatalogo

THE ESSENTIAL CHROMATOGRAPHY & SPECTROSCOPY CATALOG LC & LC/MS
For more information
Buy online:
www.agilent.com/chem/store
Contact us:
www.agilent.com/chem/contactus
This information is subject to change without notice.

© Agilent Technologies, Inc. 2012
Printed in Canada October 31, 2012
LC AND LC/MS
5991-1059EN
Scan the QR code

with your smartphone
for more information
Your Essential Resource for Columns & Supplies

NEW FORMAT. SAME ESSENTIAL RESOURCE.
LC AND LC/MS The Essential Chromatography and Spectroscopy Catalog is now available
in a boxed set to help you easily find the products and information you need.
Each catalog is your essential resource for:
• Product photos and ordering information • Troubleshooting tips
Maximize system performance • Selection guides and applications • Maintenance schedules
and produce quality results time after time • Compatibility charts
Agilent HPLC columns and supplies are designed, tested, and manufactured with the same attention to detail you expect from Agilent instruments.
That means your LC or LC/MS system will deliver superior qualitative and quantitative results, consistent reproducibility and reliability, and ultra
high-sensitivity detection.
Your boxed set includes comprehensive information for Agilent's
entire portfolio of Chromatography and Spectroscopy columns
and supplies in the following catalogs:
General Chromatography Supplies – Minimize contamination and ensure accurate,

LC and LC/MS supplies reproducible results with our selection of vials, syringes, gas purification systems, fittings
and tools, and electrochemistry meters.
• LC capillaries ensure tight, leak-free connections to protect the integrity of your LC flow path from
raw sample to analytical results Sample Preparation Products for Chromatography – Reliably extract and concentrate
• LC pumps include isocratic, binary, quaternary, capillary and preparative; All key components can be samples from complex matrices with Bond Elut SPE cartridges, pre-packaged QuEChERS kits,
accessed by simply removing the front cover sample filtration products, dried matrix spotting cards and pre-measured TOXI-TUBES.
• From small- and large-volume injection, to multi-phase sampling, Agilent autosamplers help you
process samples more quickly and generate better data
GC and GC/MS – Achieve excellent, reproducible performance for difficult samples with
• Fraction collectors allow you to collect only the peaks you want, and are ideal for applications such ultra inert solutions for GC, premium inlet supplies, Agilent J&W GC columns and standards, and more.
as prep HPLC and protein/peptide purification
LC and LC/MS, including CE and CE/MS – Maximize system performance and produce
quality results time after time with LC capillaries, lamps, and the entire family of ZORBAX LC columns
for small molecules, biomolecules and GPC/SEC.
The ZORBAX LC column family Spectroscopy – Satisfy your growing demand to screen large numbers of samples, faster, with supplies
and standards for Atomic Absorption, ICP-OES, ICP-MS, MP-AES and Molecular Spectroscopy.
From research… to leading-edge method development… to routine quality assurance… Agilent ZORBAX
and Poroshell HPLC columns are optimized for high throughput analysis, and feature the sensitivity,
For more information and to request additional catalogs,
accuracy, and reliability that demanding applications require. Other advantages include:
please visit www.agilent.com/chem/catalog
• A wide selection of chemistries, including Eclipse Plus, Eclipse XDB, StableBond, Extend, Bonus-RP,
HILIC and more
• Superior flexibility and scalability with a wide range of particle sizes (1.8, 3.5, 5, and 7 µm) and
column dimensions
Special Offers from Agilent
• Individual column performance reports that document column-to-column and lot-to-lot reproducibility
You don't have to look far to find valuable offers that feature high-performance
• Superior particle strength, even with demanding high-pressure applications columns and supplies, accessories, and more.
Just go to www.agilent.com/chem/specialoffers to find out about our latest offers.
And be sure to check back often, because we'll update this page throughout the year!
For more details about these offers, contact your local Agilent office or Authorized Agilent Distributor.
Table of Contents
Agilent Solutions, Services and Support .......................2 Columns for Small Molecule Separations ..................... 204
Featured Products .............................................................6 HPLC Column Selection....................................................206
Agilent Parts and Supplies Fast Columns for Reversed-Phase HPLC/UHPLC........227
General LC Supplies ..........................................................11 Columns for Reversed-Phase Analytical HPLC ............247
LC Capillaries......................................................................16 Columns for Preparative HPLC ........................................311
Fittings and Unions............................................................22 Columns for Other HPLC Techniques.............................323
Pump Supplies....................................................................47 Agilent Specialty Particles ...............................................347
Autosampler Supplies.......................................................61 Appendices .........................................................................343
Fraction Collector Supplies ..............................................68 Columns for Biomolecules ............................................... 350
Valve Supplies ....................................................................72 Biocolumn Selection Guidelines .....................................354
Thermostatted Column Compartment Suppplies.........82 Biomolecule Separations .................................................353
Detector Supplies ..............................................................89 UHPLC/HPLC Techniques ................................................364
Bio-inert Quaternary LC Supplies ...................................101 Method Development........................................................444
LC/MS Supplies.................................................................103 Capillary and Nano Columns ...........................................452
Agilent CrossLab LC Parts and Supplies........................112 MicroBore Columns ..........................................................461
Product Introductions .......................................................112 Purification – Prep HPLC..................................................464
Supplies for Waters HPLC Systems ...............................137 Appendices .........................................................................477
Supplies for Shimadzu HPLC Systems...........................150 Columns and Standards for GPC/SEC............................ 488
Supplies for Dionex HPLC Systems................................157 GPC/SEC Columns ............................................................490
Supplies for CTC Analytics HPLC Autosamplers .........169 Polymer Standards ............................................................530
CE and CE/MS...................................................................170 Applications ....................................................................... 552
Solution Kits........................................................................170 BioPharmaceutical ............................................................552
Capillaries............................................................................178 Chemical/Industrial...........................................................580
Instrument Parts and Supplies........................................191 Environmental.....................................................................583
Troubleshooting..................................................................201 Food and Consumer Products .........................................594
Pharmaceutical ..................................................................611
Indices ................................................................................ 644
Ordering Information ........................................................ 667
www.AGILEnt.COM/ChEM/LC 1
Agilent Solutions
Put MOrE thAn 40 yEArS OF rELEntLESS InnOvAtIOn
BEhInd yOur EvEry rESuLt
By continually raising the standards for technologies that support your routine analyses, Agilent's R&D efforts have led to breakthroughs such as:
• new GC columns that help you achieve higher levels of inertness and column-to-column reproducibility
• LC column choices that deliver the sensitivity and reliability you need for demanding applications
• Cutting-edge sample preparation products that promote reliable extraction and concentration
• Fresh atomic and molecular spectroscopy ideas for identifying and confirming targets and unknowns
Longtime Agilent customers have experienced our commitment firsthand. And now, we look forward to demonstrating
how Agilent's approach to relentless innovation can work to your advantage, too.
C H E M I C A L A N A LY S I S S O L U T I O N S
Food Forensics
From high-volume screening of vegetables for large numbers of Because the careers of world class athletes and many other
pesticides to rapid identification of pathogens, Agilent understands individuals hinge on drug testing, it’s critical that those doing
the analytical needs of food producers, shippers, and regulators. the testing have the highest level of confidence in the results.
When a new toxin appears, we deploy substantial resources to Forensics analysts worldwide have grown to depend on
quickly help customers develop robust and reliable methods. Agilent tools for accuracy, reliability, and speed in this high
Agilent's leading separations, mass spectrometry, and spectroscopy stakes, high-throughput field. Our best selling GC, GC/MS
solutions are emerging as valuable food testing techniques. and popular LC and LC/MS are workhorses in forensics labs.
Environmental Traditional Lab Informatics

The ways labs generate and store data profoundly affect
Agilent offers more than 40 years of environmental testing and
their efficiency. Agilent offers a rich, integrated suite of
regulatory expertise. We help government and private labs with
software products built on a set of customer-driven
the full range of assays, from routine testing of soils for heavy metals
architectural values with the Agilent OpenLAB Laboratory
to detection of pharmaceuticals in groundwater, in concentrations
Software Suite. OpenLAB delivers superior performance,
down to parts per trillion.
open systems integration and investment protection.
Our commitment is to deliver more value across each
step in the life cycle of scientific data – from data collection
and analysis to interpretation and management.
Energy and Fuels

Agilent collaborates closely with process industry customers to offer
analytical systems that meet their needs for separation, detection, Materials Science
throughput, and support. We’ll even preconfigure custom or standard
analyzers so they arrive at the lab ready-to-go. Agilent’s expertise in Agilent offers a newly expanded portfolio of instruments
both chemical analysis and life science is a powerful combination for used for the research, manufacturing and testing of
researching and producing biofuels, including a wide range of analytical advanced materials, from precision optics to pulp, paper
techniques for fatty acid methyl esters (FAMEs). Our newly-expanded and polymers. Tools for chromatography, atomic absorption
portfolio also offers powerful tools for developing and producing spectroscopy, molecular spectroscopy, X-ray
photovoltaic films and solar panels. crystallography, and nuclear magnetic resonance
all support continuous progress in materials science.
2
LIFE SCIENCE SOLUTIONS
Biopharmaceutical
Genomics
As “multi-omics” studies gain momentum in the search
for new therapeutics, Agilent is uniquely positioned Agilent is a global leader in microarrays, scanners, and reagents used
to provide the instruments, reagents, and powerful in a wide variety of genomic-based disease research experiments.
software needed for performing experiments in multiple Our SureSelect Target Enrichment System dominates the category,
disciplines and combining the massive amounts of data streamlining next generation sequencing studies worldwide. Agilent
into biological insight. offers a wide range of catalog microarrays and a highly-developed
capability to produce custom arrays featuring ink jet-based SurePrint
fabrication and the eArray on-line design tool. All Agilent microarrays
feature highly sensitive, selective 60-mer probes. With as many as eight
arrays printed on a standard 1 x 3 in slide, the cost per experiment
Pharmaceutical becomes very affordable.
Drug manufacturing requires the accuracy, sensitivity

and high throughput of other analytical applications,
along with the demands of regulatory record-keeping
and validation requirements. Agilent provides a potent
combination of rugged, high-throughput tools and Life Science Informatics
unmatched compliance services. Agilent now offers the Mirroring its extensive instrument portfolio, Agilent offers the industry’s
market-leading family of dissolution apparatus and sampling most extensive suite of bioinformatics software, helping users derive
systems that pair perfectly with our HPLC and UV systems. knowledge from complex genomic, proteomic, metabolomic and other
biological data. This includes DNA Analytics for analyzing CGH, ChIP and
methylation microarray data. The GeneSpring suite includes informatics
software for microarray-based gene expression data, genotyping data,
and GeneSpring MS, which are useful for analyzing mass spec data from
Proteomics proteomics and metabolomics experiments and comparing complex
datasets to explore biological questions from multiple perspectives.
Research into how large sets of proteins affect the health
of an organism requires special sets of analytical tools.
Agilent has built a formidable arsenal of liquid
chromatograph/mass spectrometers, bioinformatics
systems, multiple affinity protein removal columns, and
OFFGEL electrophoresis for protein identification and Lab Automation
protein biomarker discovery. Accurate-Mass mass
spectrometry and the microfluidic HPLC-Chip/MS To meet the skyrocketing demand for more throughput and automation,
are two Agilent innovations speeding the work of Agilent has substantially expanded its lab automation offerings. The
proteomics researchers around the globe. Agilent line of liquid handlers and microplate processors are designed to
streamline high-volume life science workflows. Agilent is also continually
upgrading its advanced autosamplers for LC, GC, LC/MS and GC/MS,
adding functionality and speed to reflect the performance of its
advanced instruments.
Metabolomics
Collections of small molecules are increasingly being seen
as rich sources of biomarkers, but studying metabolites
presents many challenges. The need for speed, accuracy,
and powerful interpretation capabilities in looking at Vacuum Technology
chemical profile snapshots is underscored because
molecules are constantly entering, leaving or changing Agilent works with customers to solve vacuum challenges from
within the metabolome. Agilent’s GC, LC, NMR and MS experiments in high-energy physics to developing systems for producing
portfolios, along with our excellent bioinformatics offerings, flat panel displays. Agilent manufactures vacuum systems used in its own
user-customizable METLIN metabolite database for mass spectrometry instruments as well as those of other manufacturers.
LC/MS, and the industry’s first commercial GC/MS Agilent's vacuum technology has been proven by the most powerful
retention time locked metabolite library align well with physics experiment ever built, CERN’s Large Hadron Collider machine,
needs of metabolomics researchers. which was used in the discovery of the Higgs boson particle.
AGILEnt SErvICE And SuPPOrt
Agilent Service and Support

for Instrument Systems
Focus on what you do best

For over 40 years, Agilent has been building and maintaining the instruments you count on to stay competitive
and successful. Trust us to protect your investment with a broad portfolio of services, backed by a global
network of experienced service professionals dedicated to the productivity of your lab.
Get the Agilent

Agilent Advantage Service Plans
Service Guarantee The best service available for your Agilent instruments
Should your instrument require
service while covered by an Agilent offers a flexible range of service plans so that you can choose the level of coverage that is best
Agilent service agreement, we for your lab.
guarantee repair or we will
replace your instrument for free.
• Agilent Advantage Gold – Priority-one coverage for ultimate uptime and productivity
• Agilent Advantage Silver – Comprehensive coverage for dependable laboratory operations
No other company offers this level
of commitment to keep your lab
• Agilent Advantage Bronze – Total repair coverage at a fixed annual price
up and running at peak efficiency. • Agilent repair Service – Basic coverage for reliable instrument repair
Agilent Advantage service plans include Agilent Remote Advisor for real-time remote monitoring
and diagnostics. Through secure internet connections, you can interact with Agilent service professionals,
receive detailed asset reports, and configure text or email alerts to notify you before problems occur –
helping you to maximize instrument uptime and optimize laboratory workflows.
Agilent Compliance Services

Equipment qualification that meets
the most stringent requirements
Enterprise Edition Compliance was developed to streamline compliance across your entire lab. Used globally
in regulated labs, including standards organizations and regulatory agencies, Enterprise Edition enables you to:
Laboratory decision makers
and users ranked Agilent • Improve qualification efficiency by automating protocols across platforms to ensure greater efficiency
as their first choice for and minimize regulatory risk
general laboratory
compliance services.
• Standardize your entire compliance operation with robust test designs that work with all your instruments
• Add, remove or reconfigure tests based upon your unique user requirements
• Significantly reduce staff review time with consistently formatted, computer generated,
tamper-proof reports
4
AGILEnt SErvICE And SuPPOrt
Agilent Education and Consulting Services

Our best minds, working for you
Make the most of your instrument with training and consulting from the same experts who designed
the instruments, software and processes you use every day.
• Classroom and on-site training in instrument operation, troubleshooting and maintenance

• Customized consulting services to meet your lab’s unique needs
the Agilent value Promise –

10 years of Guaranteed value
In addition to continually evolving products, we offer something else unique to the industry – our 10-year
value guarantee. The Agilent Value Promise guarantees you at least 10 years of instrument use from your
date of purchase, or we will credit you with the residual value of the system toward an upgraded model.
Not only does Agilent ensure a reliable purchase now, but we also ensure that your investment is just as
valuable in the future.
For more detailed information,

please go to www.agilent.com/chem/services
or contact your local Agilent Services and Support representative.
technical Support at work for you

Have a hardware, software, application, instrument repair or troubleshooting question? Agilent's technical
experts are available to answer your questions. With years of laboratory experience, our technical support
specialists can provide in-depth knowledge and experience.
For questions pertaining to supplies found in this catalog, contact your local Agilent office or Authorized
Agilent Distributor or visit www.agilent.com/chem/techsupport
need more information?

Visit www.agilent.com/chem/contactus to:
• Locate your nearest Agilent office or distributor for expert technical support.
• Get fast sales and product assistance by phone. Simply use the scroll-down menu to select your country.
• Receive email assistance using our convenient online forms.
FEAturEd PrOduCtS
A Portfolio of Analytical LC Solutions

to Match Any Application or Budget
Agilent offers a comprehensive portfolio of solutions for analytical LC that give you uncompromised chromatographic performance
while remaining within the confines of your budget. Whatever your application requires – now or in the future – common technology
across the portfolio helps you increase laboratory productivity and decrease operational costs. And because it’s from Agilent, you get
everything you expect from a chromatography leader with over 40 years of innovative contributions to LC and LC/MS technology.
Agilent 1290 Infinity LC – Infinitely more powerful

With binary and quaternary pump options, The Agilent 1290 Infinity LC is not only the most powerful but also the most
adaptive UHPLC system available. No matter what your laboratory requires, the 1290 Infinity LC can handle the widest
range of applications. And, with Agilent's Intelligent System Emulation Technology (ISET) built in, you can execute any
legacy HPLC or latest UHPLC method for faster method development or instrument-to-instrument method transfer.
Agilent 1260 Infinity LC – Infinitely more confident

The Agilent 1260 Infinity LC raises the standard in HPLC – without raising the price. It offers new levels of
productivity, data quality and robustness to give you highest confidence in your investment. With 600 bar
standard pump pressure, 80 Hz standard detector speed and up to 10 times higher UV detection sensitivity,
the 1260 Infinity LC prepares you for today’s and tomorrow’s challenges.
Agilent 1220 Infinity LC – Infinitely more affordable

The Agilent 1220 Infinity LC is a high quality, integrated system for routine HPLC and advanced UHPLC analysis,
for maximum return on investment. Take advantage of the 600 bar power range up to 5 mL/min and 80 Hz
detector speed and prepare your lab to take advantage of latest advances in LC column technology.
6
FEAturEd PrOduCtS
Low-flow LC Solutions
with unmatched Performance and Stability
Low-flow LC separation with high sensitivity detection and low sample consumption is a well-established and
proven technology. The low-flow technique is used frequently for applications where limited amounts of sample
are available, for analysis of trace level components in complex mixtures, or when an optimized LC/MS
combination is required. The Agilent 1260 Infinity Low-flow LC systems offer unsurpassed low-flow
performance and stability.
Agilent 1260 Infinity Capillary LC System

Using a unique technology, the Agilent 1260 Infinity Capillary LC System is optimized for capillary LC.
A wide range of flow rates expands laboratory flexibility, offering unparalleled sensitivity and
reproducibility. The system is ideally suited for both UV and MS applications.
Agilent 1260 Infinity nanoflow LC System for MS

Nanoflow LC is widely used for high resolution separations and high sensitivity MS detection. The Agilent
1260 Infinity Nanoflow LC System incorporates Agilent's unique Electronic Flow Control (EFC) with active
feedback and real time flow adjustment for constant flow delivery to the column independent of system
backpressure. After its first introduction with Agilent capillary and nanoflow pumps, EFC with real time flow
control is the gold standard for reliable and robust nanoflow performance.
Agilent 1260 Infinity hPLC-Chip/MS System

The Agilent 1260 Infinity HPLC-Chip/MS System is a microfluidic chip-based technology
for nanospray LC/MS. Combined with the high performance Agilent 6000 MS
systems, the HPLC-Chip II for LC/MS offers even more overall robustness,
reliability and ease-of-use. Applications include proteomics and small
molecule analysis. A custom chip program delivers customized success.
FEAturEd PrOduCtS
Agilent 6000 Series LC/MS Solutions

A comprehensive portfolio of LC/MS instrumentation with exceptional MS performance, spectral quality, and productive data analysis tools to address
a full range of qualitative and quantitative applications and match your budget.
Agilent 6100 Series Single Quadrupole LC/MS Systems

Unprecedented performance and reliability, day-after-day
The Agilent 6100 Series Single Quadruple systems deliver superior MS data quality in an easy-to-use, space-saving package.
With configurations to fit all budgets, the industry’s most popular single-quad LC/MS complements your existing LC detectors
and integrates seamlessly with Agilent’s ChemStation LC control. The 6100 Series Single Quadrupole LC/MS provides
complementary information to ultraviolet diode array detection (UV-DAD).
Agilent 6120 – Budget friendly and very easy to use – with Agilent’s 1220 Infinity LC, a perfect workhorse addition
for labs just getting into LC/MS.
Agilent 6130 – Flexible, high performance solution ideal for any quantitation application with 3,000 amu mass range
and 1 pg sensitivity – now compatible with Agilent Jet Stream Technology.
Agilent 6150 – Unsurpassed data quality for UHPLC and high-throughput screening and qualitative applications, with faster
scan speed (10K amu/s) and the power of Agilent Jet Stream Technology.
Agilent 6200 Series Accurate-Mass tOF LC/MS Systems

Unmatched confidence of Ultra High Definition
Time-of-Flight (TOF) technology
The Agilent 6200 Series TOF systems deliver unmatched speed, mass accuracy and resolution performance in a compact
benchtop design. Superior data quality offers certainty for screening, identification and quantitative studies.
Agilent 6224 – Affordable and easy-to-use instrument with <2 mg/L mass accuracy and 20,000
resolution for routine analysis of a wide variety of molecules such as pesticides, pharmaceuticals,
peptides and intact proteins.
Agilent 6230 with Agilent Jet Stream Technology – Offers 5-10x more sensitivity for confident
screening of compounds at low concentration.
8
FEAturEd PrOduCtS
Agilent 6400 Series triple Quadrupole LC/MS Systems

Clearly better sensitivity gives better results
The Agilent 6400 Series Triple Quadrupole systems offer unmatched sensitivity and reliability for trace
analysis in food safety, environmental samples, biomarker validation, and ADME/DMPK studies for
drug candidates. Powered by Agilent MassHunter software, with Optimizer to automatically fine tune
parameters for ion transitions, the 6400 Series Triple Quadruple systems offer simplified method
development to achieve outstanding results.
Agilent 6420 – Economical, easy to use, with Agilent 1260 Infinity LC, a perfect workhorse
instrument for labs with basic needs for quantitative capabilities.
Agilent 6430 – Offers added sensitivity to achieve outstanding performance for most assays.
Agilent 6460 with Agilent Jet Stream Technology – Provides dramatically improved sensitivity
for your most demanding quantitative applications.
Agilent 6490 – Incorporates the revolutionary iFunnel technology to give ultimate sensitivity
for the most challenging quantitative analyses in pharmaceutical, clinical, food safety,
and environmental applications.
Agilent 6500 Series Accurate-Mass Q-tOF LC/MS Systems

Ultra high definition MS/MS, uncompromised performance
The Agilent 6500 Series Q-TOF systems deliver an unmatched combination of mass accuracy, mass resolution,
sensitivity, dynamic range and speed. With best-in-class MS and MS/MS mass accuracy, they provide
the capabilities you need to profile, identify, characterize, and even quantify samples as diverse as drug
impurities, endogenous metabolites, and protein biomarkers.
Agilent 6520 – Easy-to-use instrument for routine analysis of a wide range of compounds day in and day out.
Agilent 6530 with Agilent Jet Stream Technology – Provides 5-10x more sensitivity for screening
of low level compounds.
Agilent 6538 – Provides enhanced resolution in a bench top instrument for confident
characterization of complex samples.
Agilent 6540 with Agilent Jet Stream Technology – Combines the highest levels of sensitivity
with enhanced resolution to address the most challenging applications.
FEAturEd PrOduCtS
Agilent ZOrBAX 300 StableBond Columns

ZORBAX 300 StableBond columns are an ideal choice for the reproducible separations
of proteins and peptides. 300 StableBond columns are unmatched in their durability
at low pH, such as with the TFA containing mobile phases typically used for protein
and peptide separations. For LC/MS separations at low pH, 300 StableBond columns
can also be used with formic acid and acetic acid mobile phase modifiers.
turn to page 367.
Agilent Poroshell Columns

As new biopharmaceutical research and manufacturing practices focus more and more on
peptides and proteins, and as time to market becomes increasingly critical, the rapid HPLC
separation of biomolecules becomes increasingly valuable. The speed and resolution benefit
shown here by Agilent Poroshell columns improve chances that the desired separation will
be achieved while facilitating separation analysis times.
For Poroshell 120, turn to page 228.
For Poroshell 300, turn to page 380-381.
Agilent LC Capillaries
Agilent LC capillary starter kits contain the most often used capillaries and fittings. Our genuine flexible
stainless steel capillaries make the best connection in your LC system, no matter the brand. The kits are for
use with 3-4 or 1-2 mm id columns, as well as for Micro LC columns. The free Cybertool, which contains
over 30 tools, is useful in every laboratory.
turn to page 16.
Agilent ZOrBAX rrhd hILIC Plus

HILIC can have distinct advantages over traditional RPLC in terms of LC/MS sensitivity,
due to the use of highly organic mobile phases. These mobile phases have higher volatility
than traditional RPLC mobile phases, making HILIC well suited for applications with mass
spectrometers. Agilent ZORBAX RRHD HILIC Plus is the column to choose.
turn to page 324.
10
AGILEnt PArtS And SuPPLIES
General LC Supplies
Agilent offers a wide range of supplies for operation and maintenance of LC systems. These products have
been carefully designed or selected by Agilent to work with your Agilent instruments for maximum
performance and uptime.
Hex keys, Rheotool 5064-8211
LC Tools
Your Agilent LC system arrives with a full complement of tools needed to perform general maintenance
and operation procedures. Should you need additional or replacement tools, Agilent offers a selection Mounting tool, 0100-1710
of high-precision, high-quality, stainless steel tools, to avoid any deformation of the screws or nuts.
LC tools
description Part no.
Tool kit hex keys, Rheotool 5064-8211
Includes 3 hex keys, 4 mm, 1.5 mm, and 9/64 in, with straight or T-handle plus Rheotool
Torque wrench adapter G1315-45003
Used with nanoliter flow cell for Diode Array Detector to mount capillaries of cell
(P/N G1315-68714)
Insert tool (seal wash option) 01018-23702 HPLC system tool kit, G4203-68708
Mounting tool for flangeless nut 0100-1710
Mounting clamp 5021-1866
Velocity regulator 5062-2486
USB memory stick G4208-68700
Compact flash card 01100-68700
HPLC system tool kit G4203-68708
Compact tool kit G4296-68715
Torque wrench, 2-25 Nm G4220-20012
Bit kit for torque wrench 5023-0282
Compact tool kit, G4296-68715
PEEK Luer lok needle assembly 5190-0924
Plastic tubing cutter 8710-1930
Blades for plastic cutter, 5/pk 8710-1931
Tubing clip 5042-9967 Torque wrench, 2-25 Nm, G4220-20012
Tubing clip 5042-9954
Open end wrench, 14 mm 8710-1924
Plastic tubing cutter, 8710-1930
Tubing clip, 5042-9967
HPLC In-Line Filters

Column inlet frit contamination can increase column backpressure and reduce efficiency. Microbore column blockages are a particular problem, due to the
small diameter of the inlet frit. To prevent blockages, always use the appropriate filters in your LC system. Agilent offers two types of high pressure in-line
filter kits for use with any HPLC system.
hPLC In-Line Filters

Frit
Porosity Frit Inlet
description (µm) Id (mm) Comments Part no. replacement Frits
RRLC in-line filter 0.2 4.6 max 600 bar 5067-1553 5067-1562, 10/pk
4.6 mm, 0.2 µm pore size filter, connecting capillary, max 600 bar
RRLC in-line filter 0.2 2.1 max 600 bar 5067-1551 5067-1555, 10/pk
2.1 mm, 0.2 µm pore size filter, connecting capillary, max 600 bar
Low dispersion in-line filter 2 2.1 < 1 mL/min 01090-68702 280959-904, 10/pk
Includes two frits, 2.1 mm, 2 µm pore size filter holder with inserts, 0.5 280959-907, 10/pk
60 x 0.12 mm connecting capillary
Universal in-line filter 2 4.8 1-5 mL/min 01090-68703 01090-27609, 2/pk
Includes two frits, 4.8 mm, 2 µm pore size filter holder with inserts,
130 x 0.25 mm connecting capillary
Semi-prep filter 0.5 12.7 1-5 mL/min 5064-8273 5022-2185
High pressure semi-prep filter 10 19 5-10 mL/min 5022-2165 5022-2166, 10/pk
Prep filter 10 10-100 mL/min 5065-4500 5065-9901
Replacement Glass Cartridge
In-line filter for G1311A Recommended when high salt G1311-60006
concentrations are used
1290 Infinity LC in-line filter (0.3 µm) 0.3 2.0 1200 bar 5067-4638 5023-0271, 5/pk
RRLC in-line filter, 5067-1551 Low dispersion in-line filter, 01090-68702 Semi-prep filter, 5064-8273
High pressure semi-prep filter, 5022-2165 1290 Infinity LC in-line filter, 5067-4638
12
Solvent Filters/Degassers
An added benefit of filtering solvents is that degassing occurs at the same time. This is particularly beneficial
if you do not have an on-line degasser in your system. The benefits of solvent filtration:
• Degasses eluents as particulates are removed

• Prevents the formation of spurious peaks within the detector due to solvent outgassing at the
low-pressure end of the chromatograph
• Increases solvent inlet lifetime
• Eliminates pump downtime caused by air locks and particulates in check valves
• Decreases piston wear, while increasing column life
Solvent Filters/degassers
HPLC solvent filter/degasser assembly 3150-0577
replacement Parts for 3150-0577
Glass funnel, 250 mL 5188-2743
PTFE coated sieve 5188-2744
PTFE seal 5188-2745 Glass solvent filter degasser, 3150-0577
Funnel base, glass 5188-2746
Filter Membranes
Regenerated cellulose filter membranes 3150-0576
Diameter 47 mm, pore size 0.45 µm, 100/pk
Nylon filter membranes 9301-0895
PTFE filter membranes 3150-0509
Agilent Rack for LC Systems

Reclaim critical bench space with the stable, robust rack for LC systems. The sturdy and open design offers
complete protection for your sensitive LC system and easy maintenance for fast, safe access to instruments
and cables. It is designed for all Agilent LC modules stacks and features:
• Easy assembly saves time and expense (see diagram)

• Adjustable shelves allow full customization for all Agilent LC modules
• Open design ensures proper airflow management and distribution of equipment and cabling

Agilent rack for LC systems 5001-3726
Agilent rack for LC systems, 5001-3726
height 99 cm
width 48 cm
depth 43 cm
weight 27 kg
tIPS & tOOLS
The Agilent rack can be used to optimize your 1290 Infinity LC for ultra-low dispersion, which can enhance performance of high-efficiency
columns. Further information can be found in application note 5990-9502EN at www.agilent.com/chem/library
14
LC Standards
LC Standards
Caffeine standards kit for LC OQ/PV 8500-6762
Includes one 10 mL ampoule: 125.0 µg/mL; four 5 mL ampoules: 5.0, 25.0, 250.0
and 500.0 µg/mL caffeine in water
Caffeine standards kit for capillary OQ/PV 5065-4420
Includes 5 ampoules, 5 mL: 2.0, 4.0, 20.0, 100.0, 200.0 µg/mL caffeine in water
Caffeine OQ/PV sample for dissolution test, 150 mg/L caffeine in water, 500 mL 5042-6476
Caffeine OQ/PV sample for dissolution test,
Caffeine standard, 250 µg/mL G4218-85000
5042-6476
Enterprise Edition caffeine standard kit 5190-0488
Fluorescence detector calibration sample, 1 g glycogen 5063-6597
RI detector OQ/PV test sample 5064-8220
Includes 5 ampoules, 5 mL: 5, 10, 15, 25, and 50 mg/mL glycerin in water
Isocratic and gradient standards 01080-68702
Contains 0.15% diethylphthalate, 0.01% biphenyl, and 0.03% terphenyl in MeOH (w/w).
Gradient standard includes 0.32% dioctyl phthalate as well. Two 0.5 mL ampoules of each.
Isocratic standard, 0.5 mL ampoule 01080-68704
RRLC Check out sample, 1 mL ampoule 5188-6529
Chip cube high mass reference (HP-1221), 0.5 mL G1982-85001
Chip cube high mass solvent (FC-70), 25 mL Fluorinert G1982-85002
Chip cube low mass reference sample, 1 g Methyl stearate G1982-85003
ESI+APCI LC demo sample G1978-85000
Contains 5 x 1 mL ampoules with 33 ng/µL crystal violet,
77 ng/µL carbazole, 300 ng/µL 9-phenanthrol, 1 ng/µL 1-hexanesulfonic acid sodium salt
in water/methanol 60:40
ES-TOF biopolymer reference standard kit G1969-85003
Contains 7 x 2 mL ampoules with 5 mM purine, 1 M ammonium formate, 0.5 mM HP-0285,
0.1 mM HP-0321,0.2 mM HP-1221, 0.2 mM HP-1821, 0.5 mM HP-2421
HSA peptide standard mix kit G2455-85001
2 vials with 6 lyophilized peptides
LC Capillaries
Your LC system’s components
are only as reliable as
the connections between them
Think of your LC system as a chain from analyte… to pump… to column… to detector… to waste. Every link
must operate at maximum efficiency, or the whole chain risks failure – compromising your results.
Agilent LC capillaries:
Agilent’s unique laser welding process ensures that
Your link to analytical success
the capillary ends are absolutely flat, eliminating
any chance of capillary-induced dead volume. At Agilent, we invest heavily in the quality of our capillary connections. All are engineered and
manufactured to the same quality standards as our columns and instruments, so you can protect the
integrity of your results at every step of your LC flow path.
Using our flexible stainless steel and polymer capillaries and fittings can provide:
• Tight, leak-free connections
• Zero dead volume connections
• An inert surface (when using polymer or PEEK/stainless steel bio-inert capillaries)
• High flexibility without sacrificing durability
• Easy cutting to the exact length you need (PEEK tubing)
• Predefined lengths for specific flow path locations (capillaries)
In addition, all Agilent capillaries are precision cut with square ends, are burr-free, have no inner-diameter
distortion, and come in a variety of materials to suit your needs.
16
Engineering of Agilent Capillaries

The same professional engineers in our LC manufacturing facility in Germany who design our industry-leading LC instruments, also play a critical role
in developing capillaries and fittings for your instrument. Their attention to detail helps you to get the best performance possible for your applications.
Our LC manufacturing tools – like high-end, special laser-cutting machines – result in completely tight, smooth and perfect-cut capillaries. Our broad
selection of capillaries is made only from the highest-quality materials and will meet any of your application needs.
Avoid chromatographic issues – like peak broadening and system leaks – by choosing Agilent’s selection of premium capillaries. Agilent is committed
to Fast LC and high-productivity performance, together with accurate quantitation.
Advantages for Bio Capillaries
• Laser-welded capillary tip for precise capillary cut

• Metal-free connection for all HPLC applications
• PEEK and stainless steel design allows you to exceed typical pressure limit reached with conventional polymer
recommended hPLC Stack Configuration
Agilent 1290 Infinity LC: Agilent 1290 Infinity LC:

default stacking and with LC system rack and ultra-low
capillary tubing configuration dispersion optimizations
Needle Seat Capillary:

Solvent Tray
0.11 x 100 mm = 0.9 µL
Solvent Tray Needle Seat capillary: Binary Pump ALS → TCC Capillary:
0.12 x 100 mm = 1.1 µL 0.08 x 220 mm = 1.1 µL
Diode Array Detector
Flow Cell
ALS → TCC capillary TCC → DAD Capillary:
0.12 x 340 mm = 3.8 µL 0.08 x 220 mm = 1.1 µL
Column Compartment TCC → DAD Capillary:
tCC → dAd capillary Flow Cell V(s)0.6 µL = 0.8 µL
0.12 x 220 mm = 2.5 µL Autosampler
needle ALS → tCC total extra-column volume = 3.9 µL
Autosampler seat capillary
Flow Cell V(s)1.0 µL = 2.3 µL capillary
ALS → tCC capillary Volume of 2.1 x 50 mm column = 172.3 µL
needle seat total extra-column volume = 9.7 µL
capillary Void Volume of Column = 103.9 µL
Volume of 2.1 x 50 mm column = 172.3 µL Column Compartment
tCC → dAd capillary Percent extra-column volume = 3.7%
Void volume of column = 103.9 µL
Binary Pump
Percent extra-column volume = 9.3%
Diode Array Detector
Flow Cell
60% reduction
in extra-column volume
Syntax for capillary description

The tables below will be your guide to identifying the proper specifications for your capillary. On all capillaries, dimensions are noted in id (mm), length (mm)
and where applicable, volume (µL). When you receive your capillary, these abbreviations are printed on the packaging.
Using the guide: This fitting is coded as "SPF", for Swagelok, PEEK, Finger-tight.
type Material Fitting Left/Fitting right

Key description Key description Key description
Capillary Connection capillaries SS Stainless steel W Swagelok + 0.8 mm Port id
Loop Loop capillaries Ti Titanium S Swagelok + 1.6 mm Port id
Seat Autosampler needle seats PK PEEK M Metric M4 + 0.8 mm Port id
Tube Tubing FS/PK PEEK-coated fused silica* E Metric M3 + 1.6 mm Port id
Heat Heat exchanger PK/SS Stainless steel-coated PEEK** U Swagelok union
exchanger PTFE PTFE L Long
FS Fused silica X Extra long
*Fused silica in contact with solvent H Long head
**PEEK in contact with solvent G Small head SW 4 mm
N Small head SW 5 mm
F Finger-tight
The type gives some indication on the primary function, like a loop or a connection capillary. V 1200 bar
The material indicates which raw material is used. B Bio
The fitting left/right indicate which fitting is used on both ends of the capillary. P PEEK
At-a-glance color-coding keys

The color of your capillary will help you Color-coding key for Agilent capillary tubing
quickly identify the capillary id – see the
chart to the right for reference. Internal diameter in mm Color code
0.015 Orange
0.025 Yellow
0.05 Beige
0.075 Black
0.1 Purple
0.12 Red
0.17 Green
0.20/0.25 Blue
0.3 Grey
0.50 Bone White
Tip: As you move to smaller-volume, high efficiency columns, you’ll want to use narrow id tubing, as
opposed to the wider id tubing used for conventional HPLC instruments.
18
Agilent capillary supplies are made

from a variety of top-quality materials
to suit your lab’s every need
Stainless Steel: good resistance to pitting corrosion

Stainless steel is ideal for most standard applications – except where bio-inertness is required, in which
case we recommend PEEK-lined or Bio-inert titanium capillaries. Agilent’s 0.6 mm od flexible grade 316L
stainless steel capillaries (chrome/nickel/molybdenum bearing grade) are also much easier to handle than
conventional, rigid 1.6 mm od capillaries.
titanium: high inertness for biological applications

Analyzing metal-sensitive proteins and biotherapeutics presents challenging solvent conditions for
LC instruments. In addition, bio-molecules tend to bind non-specifically to surfaces. For these reasons,
bio-inert titanium is the best choice for these applications. Titanium is biocompatible, making Bio-inert
Titan capillaries perfect for applications where bio-inertness is paramount.
Stainless Steel-coated PEEK:

high-pressure bio-inertness and robustness
In bio-chromatography, capillaries and connectors should be inert to ensure the lowest interaction
with protein samples. They must also be highly robust to withstand harsh cleaning procedures.
Unfortunately, metal-free PEEK capillaries can only withstand pressures of up to 200 bar in a
thermostatically controlled cabinet with acetonitrile; even then, flexibility is compromised. To meet
the growing need for bio-inertness, robustness, and higher operating pressures, Agilent has engineered
a bio-inert PEEK liner clad with high-strength stainless steel to withstand pressures of at least
600 bar. This same technology is used in Agilent capillary fittings – giving you a strong, metal-free,
capillary/ connector flow path for bio-inert applications.
PEEK-coated fused silica: rugged and pliable

Since their introduction in the early 1980s, fused silica capillaries have become the industry standard
for many GC and LC applications – as well as capillary electrophoresis. Agilent fused-silica capillaries
are made from high-purity silicon dioxide, and coated with PEEK for strength, durability, and pliability.
PEEK: durable and abrasion-resistant

Agilent PEEK capillaries are best for standard and bio-inert applications. PEEK (polyetheretherketone)
is a thermoplastic polymer that resists mechanical and solvent damage, even at high temperatures.
Because it is less vulnerable to corrosion than stainless steel, PEEK can be used in place of stainless steel
when the capillary’s external diameter is 1/16 in or less. It also resists abrasion, making it an excellent
coating for fused silica capillaries. tip: Use our color-coded PEEK fittings to track inlets and outlets of
valves, columns, and detectors.
To learn more about Agilent LC capillary supplies, or to order now, visit

www.agilent.com/chem/LCcapillaries
20
Agilent capillaries for routine applications
Internal
diameter Pressure limit
Category Applications (mm) (bar) ph range Comments
Stainless steel ü All capillary applications, 0.075 1200 1-14 ü Flexible for easy routing
except where bio-inertness is required 0.12 ü Ready to use: cleaned and
ü 1/32 in od designed for 0.17 passivated to a high standard
Agilent 1100 systems 0.25 ü Pre-cut capillaries are optimized
ü 1/16 in and 1/8 in od for most 0.3 for the lowest internal volume
0.5
applications ü Use pre-cut lengths to maintain
0.61
zero-dead-volume performance
0.93
Titanium ü Where ultimate bio-inertness is essential 0.17 600 1-14
0.61
Stainless-steel-coated ü Universal for standard 0.17 600 1-14 ü Metal-free flow path
PEEK and bio-inert applications ü Robust
ü UHPLC bio-inert applications ü Flexible
ü Resists corrosion better than
stainless steel
PEEK-coated fused silica ü Industry standard for most LC applications 0.025 690 1-10 ü Mechanically strong
0.050 ü Consistent, rigid flow path
0.075 ü Ideal replacement for
0.100 stainless steel
0.125
ü To avoid permanent tube damage,
always use pre-cut lengths
PEEK ü Most HPLC applications 0.13 480* 1-14 ü Smooth internal surface minimizes
0.18 200** turbulence for improved
0.25 resolution
0.50 ü Flexible, easily cut to length
ü Use with PEEK or stainless
steel fittings
ü Excellent solvent compatibility
*At ambient temperature with water
**With acetonitrile at non-ambient temperature
Fittings for a strong, capillary flow path

Agilent offers more than 20 fitting varieties for Swagelok-type or metric M4/M3-type connections.
Depending on your application, different materials must be used:
• Stainless steel or PEEK delivers permanent high-pressure sealing performance for connections
such as valves, heaters, and columns
• Stainless steel ensures permanent high-pressure sealing and optimal performance throughout
your LC system up to 1200 bar
• Finger-tight fittings (polymeric for 400 bar and polyketone for 600 bar) are a convenient option;
They allow easy end fitting adjustment, so you can seat the capillary into the column properly,
preventing extra-column voids and leaks
• High-pressure fittings, which can be used with pressures up to 1200 bar, can be removed and replaced
• It’s a good idea to use stainless steel nuts and ferrules for instrument connections, and PEEK nuts
and ferrules for column and guard column connections, since these are changed most frequently
Agilent fittings for leak-free connections
Fitting type Advantages/tips

Swagelok-type fittings ü Suitable for most connections
ü Available in a variety of combinations:
ü One piece or multiple pieces with nut + front and back ferrules
ü Stainless steel, PEEK, polyketone, or a stainless steel/PEEK combination
Metric M4/Metric M3 ü For micro valve connections
Stainless steel ü At least 1200 bar
ü Most popular material for permanent, high-pressure sealing
ü Use our slitted socket wrench (Part No. 8710-2391 or 5023-0240) for optimal tightness
1200 bar removable fittings for 1290 Infinity LC ü 1200 bar
ü Available in standard, long, and extra-long sizes for compatibility with columns that have
different sized nuts
ü Removable and replaceable
ü Use our slotted socket wrench (Part No. 8710-2391 or 5023-0240) for optimal tightness
PEEK ü Up to 400 bar (at ambient temperature with water)
ü Easy, finger-tight column connections
ü Ideal for frequently changed connections, such as column connections
ü Pressure is less critical
Polyketone ü <600 bar (600 bar pressure rating)
ü Easy, finger-tight column connections
ü Fits stainless steel tubing
22
Agilent 1260/1200/1100 Infinity Series LC

Fitting Fitting
Id Length type type
From (A) to (B) Material (mm) (mm) From to notes Part no.
Pump Autosampler SS 0.17 900 S S Pre-swaged on A G1329-87300
Pump Autosampler SS 0.17 700 S S Pre-swaged on A and B G1312-87304
Pump Autosampler SS 0.17 500 S S Pre-swaged on A G1312-67305
Pump Autosampler SS 0.17 400 S S Pre-swaged on A and B G1312-87303
Pump Autosampler SS 0.17 380 S S Pre-swaged on A and B 01090-87306
Manual Injector Column SS 0.17 180 S S Pre-swaged on A G1313-87305
Manual Injector TCC SS 0.17 500 SH S G1328-87600
Heater Column SS 0.17 90 S S G1316-87300
Column Detector SS 0.17 380 S S Pre-swaged on A; G1315-87311
thermal isolation
TCC\VWD MS SS 0.12 500 S S Pre-swaged on A G1316-87309
Column VWD PK 0.17 600 Finger-tight fittings not included 5062-8522
(0100-1516, 2/pk)
Pump Purge Valve Waste PK 1.3 5000* No fitting needed 5062-2461
Detector Waste PTFE 0.8 5000* Finger-tight fittings not included 5062-2462
(0100-1516, 2/pk)
VWD Waste PK 0.25 500 Finger-tight fittings not included 5062-8535
(0100-1516, 2/pk)
Autosampler TCC SS 0.12 180 S S Pre-swaged on A; can also be G1313-87304
connected to low dispersion
heat exchanger
Thermostatted TCC SS 0.12 280 S S Pre-swaged on A; can also be 01090-87610
Autosampler connected to low dispersion
heat exchanger
TCC Column SS 0.12 105 S S Pre-swaged on A 01090-87611
Column DAD SS 0.12 150 S S Pre-swaged on A G1315-87312
Female adapter SS 0.17 150 S G1315-87303
for connecting
long columns
Purge Valve** Waste SS and FS 0.17 150 S U G1312-67500
*Capillary is intended to be cut to the right length for your need.
**Calibration capillary assembly
Material
Key description
SS Stainless steel
PK PEEK
PTFE PTFE
FS Fused silica
S Swagelok 1.6 mm port id
SH Swagelok 1.6 mm port id, long head
U Swagelok union
Agilent 1290 Infinity Series LC

Fitting Fitting
Length type type
From (A) to (B) Material Id (mm) (mm) From to notes Part no.
Pump Thermostatted SS 0.17 450 S S Pre-swaged on A and B 5067-4658
Autosampler
Autosampler TCC SS 0.12 340 S S Pre-swaged on A 5067-4659
Column DAD SS 0.12 220 S S Pre-swaged on A 5067-4660
1290 System CTC Autosampler SS 0.17 600 S SH Pre-swaged on A 5067-4670
CTC Autosampler Column SS 0.12 600 S S 5067-4669
Detector Waste PTFE 0.8 5000* Finger-tight fittings 5062-2462
not included
(0100-1516, 2/pk)
*Capillary is intended to be cut to the right length for your need.
Stainless steel fittings (S), 5062-2418 Finger-tight PEEK fitting (SPF), 0100-1516 Stainless steel back ferrule, 5180-4114
Images shown are capillary fittings. For complete information on fittings, turn to page 40.
24
Agilent 1290 valve head

Fitting Fitting
Id Length type type
From (A) to (B) Material (mm) (mm) From to notes valve Information Part no.
Autosampler Valve with SS 0.12 340 S SX Pre-swaged on A 5067-4684
Swagelok
port
Autosampler Valve with SS 0.12 340 S SX Pre-swaged on B G4231A/B 2 Position/6 Port 5067-4647
Swagelok valve head, 600/1200 bar
port
Autosampler Valve with SS 0.12 340 SLV M G4232A 2 Position/10 Port 5067-4744
M4 port micro valve head, 600 bar
Autosampler Valve with SS 0.12 500 SLV M G4234A/B 6 column selector 5067-4745
M4 port valve, 600/1200 bar
Valve with Heat SS 0.12 90 SX S Pre-swaged on G4231A/B 2 Position/6 Port 5067-4649
10/32 exchanger A and B valve head, 600/1200 bar
Swagelok port
Valve with Heat SS 0.12 90 M SL Pre-swaged on B G4232A 2 Position/10 Port 5067-5106
M4 port exchanger micro valve head, 600 bar
Short column Valve with SS 0.12 130 SV M G4234A/B 6 column selector 5067-4735
M4 port valve, 600/1200 bar
Short column Valve with SS 0.12 150 SV M G4232A 2 Position/10 Port 5067-5104
Long column Valve with SS 0.12 280 SV M G4232A 2 Position/10 Port 5067-5107
Short column Valve with SS 0.12 150 SL SX Pre-swaged on B G4231A/B 2 Position/6 Port 5067-4650
port
Short column Valve with SS 0.12 150 SL SX G4232B 2 Position/10 Port 5067-4686
10/32 valve head, 1200 bar
Swagelok
port
Long column Valve with SS 0.12 280 SL SX Pre-swaged on B G4231A/B 2 Position/6 Port 5067-4651
port
Long column Valve with SS 0.12 280 SL SX G4232B 2 Position/10 Port 5067-4687
Swagelok valve head, 1200 bar
port
(Continued)
Material
Key description
SS Stainless steel
SH Swagelok 1.6 mm port id, long head
SL Swagelok 1.6 mm port id, long
SLV Swagelok 1.6 mm port id, long, 1200 bar
SX Swagelok 1.6 mm port id, extra-long
M Metric M4 0.8 mm port id
Agilent 1290 valve head

Fitting Fitting
Id Length type type
From (A) to (B) Material (mm) (mm) From to notes valve Information Part no.
Valve Detector SS 0.12 200 SX S Pre-swaged on G4231A/B 2 Position/6 Port 5067-4653
Swagelok port A and B valve head, 600/1200 bar
Valve with Detector SS 0.12 200 SX S Pre-swaged on A G4232B 2 Position/10 Port 5067-4689
Swagelok port valve head, 1200 bar
Valve with Detector SS 0.12 250 M SLV G4232A 2 Position/10 Port 5067-4746
Heat exchanger Valve with SS 0.17 90 SL M Pre-swaged on A G4232A 2 positions/10 ports 5067-5109
M4 port valve head, 1200 bar
Column Valve with SS 0.17 90 SV M G4232A 2 positions/10 ports 5067-5110
G4232A 2 SS 0.17 250 SL M Pre-swaged on A G4232A 2 positions/10 ports 5067-5113
positions/ valve head, 1200 bar
10 ports valve
head, 1200 bar
Agilent 1200 and 1100 Prep LC Systems

Fitting Fitting
Id Length type type
From to Material (mm) (mm) From to notes Part no.
Prep Isocratic Autosampler ST 0.6 400 S S Pre-swaged on G1361-67302
A and B
Autosampler Column ST 0.5 600 S S/SX G2260-87300
Autosampler Column ST 0.5 400 S SH G2260-87301
Stainless steel fittings (S), 5062-2418 Stainless steel extra long fitting (SX), 5065-9967 1200 bar removable long fitting (SLV), 5067-4738
1200 bar removable fitting (SV), 5067-4733 PEEK fittings, plugs (MP), 5065-4410
26
Miscellaneous Capillaries
Fitting Fitting Od Od
type From type to (mm) (mm)
Material Id (mm) Length (mm) (A) (B) A* B* notes Part no.
SS 0.12 70 S S 1.6 1.6 G1316-87303
SS 0.12 2000 U U Restriction Capillary 5022-2159
SS 0.12 105 1.6 1.6 Capillary without fitting 5021-1820
SS 0.12 50 S U 1.6 G1316-87312
SS 0.12 340 S S 1.6 1.6 G1316-87319
SS 0.12 170 S S 1.6 1.6 G1316-87316
SS 0.12 300 S S 1.6 1.6 G1316-87318
SS 0.12 210 S S 1.6 1.6 G1316-87317
SS 0.12 70 S U 1.6 G1316-87313
SS 0.12 90 S U 1.6 G1316-87314
SS 0.12 60 S S Pre-swaged on A and B 79841-87610
SS 0.12 340 S M 0.8 Pre-swaged on A G1316-87305
*1.6 mm = 1/16 in
(Continued)
Material
Key description
SS Stainless steel
U Swagelok union
M Metric M4 0.8 mm port id
Stainless steel fittings (S), 5062-2418
SS 0.12 100 M M 0.8 0.8 G1316-27301
SS 0.12 75 S M 1.6 0.8 G1316-87306
SS 0.12 90 S SX 1.6 1.6 5067-4685
SS 0.12 120 SX SX 1.6 1.6 5067-4688
SS 0.17 280 S S 1.6 1.6 Pre-swaged on A 01090-87304
SS 0.17 800 S S 1.6 1.6 Pre-swaged on A 01048-87302
SS 0.17 105 S S 1.6 1.6 G1316-87321
SS 0.17 170 S S 1.6 1.6 G1316-87323
SS 0.17 250 S S 1.6 1.6 Pre-swaged on A and B G1367-87304
SS 0.17 800 SL S 1.6 1.6 Pre-swaged on A 01078-87305
SS 0.17 280 SX S 1.6 1.6 Pre-swaged on A and B 5067-4608
SS 0.17 700 S SX 1.6 1.6 Pre-swaged on A and B 5067-4648
SS 0.17 150 M M 0.8 0.8 5067-4737
SS 0.17 700 SL M 1.6 0.8 Pre-swaged on A 5067-5120
*1.6 mm = 1/16 in
(Continued)
Stainless steel extra long fitting (SX), 5065-9967 Stainless steel ferrule (M), 5067-1557
28
SS 0.17 280 SX SX 1.6 1.6 Pre-swaged on A and B 5067-4607
SS 0.17 280 SX S 1.6 1.6 Pre-swaged on A and B 5067-4608
SS 0.17 500 SX Nut 1.6 1.6 Pre-swaged on A 5067-4609
(P/N
0100-2086)
PK/SS 0.17 100 1.6 1.6 Capillary without fitting 5067-4777
SS 0.25 320 S S 1.6 1.6 Pre-swaged on A and B 79835-87638
*1.6 mm = 1/16 in
Material
Key description
SS Stainless steel
PK PEEK
PK/SS PEEK and Stainless steel
Ti Titanium
U Swagelok union
SLB Swagelok 1.6 mm port id, long bio
SV Swagelok 1.6 mm port id, 1200 bar
Stainless steel extra long fitting (SX), 5065-9967 Stainless steel ferrule (M), 5067-1557
Supplies for the Agilent Infinity 1260 Bio-inert LC System

Fitting
Id Length type Fitting
From (A) to (B) Material (mm) (mm) From type to notes Part no.
Pump Thermostatted Ti 0.17 700 SLB SLV Pre-swaged on A G5611-60501
autosampler
Pump Manual Ti 0.17 900 SLB SLV Pre-swaged on A G5611-60502
injection valve
Pump Injector Ti 0.17 400 SLB SLV Pre-swaged on A G5611-60500
Injector Detector PK/SS 0.17 400 SV SV G5667-60500
Manual injector Detector PK/SS 0.17 500 SV SV G5667-60501
Autosampler Autosampler Ti 0.17 160 SLB SV Pre-swagged on A G5611-60503
injection valve analytical head
Damper Pump head Ti 0.6 234 SLB SLB For pump only. Pre-swaged on A and B G5611-67301
Outlet ball valve Damper Ti 0.6 248 SLB SLB For pump only. Pre-swaged on A and B G5611-67300
Autosampler Column PK/SS 0.17 100 SV SV Included in the Bio Capillary starter kit; G5667-60502
injection valve used for 2 position/6 port and
4 column selector valve
Autosampler Column PK/SS 0.17 150 SV SV Included in the Bio Capillary starter kit G5667-60503
injection valve
Autosampler Column PK/SS 0.17 200 SV SV Included in the Bio Capillary starter kit G5667-60504
injection valve
Autosampler Column PK/SS 0.17 300 SV SV Included in the Bio Capillary starter kit; G5667-60505
injection valve used for 2 position/6 port and
4 column selector valve
Autosampler Column PK/SS 0.17 SV SV Bio-inert Low Dispersion G5616-60050
injection valve Heat exchanger
1200 bar removable fitting (SV), 1200 bar removable long fitting (SLV), Titanium fitting (SLB), Bio-inert Low Dispersion
5067-4733 5067-4738 G5611-60502 Heat Exchanger, G5616-60050
30
PEEK Coated Fused Silica Capillaries for nano LC

Id Length Fitting Fitting
From (A) to (B) Material (mm) (mm) type From type to Part no.
Switching valve Column FS/PK 25 100 MP WPF G1375-87320
EMPV Flow sensor FS/PK 25 220 WG MP/WG G1375-87321
Flow sensor Injection valve FS/PK 25 350 MP/WG MP G1375-87322
Injection valve Injector seat or to 2nd pump FS/PK 75 650 MP WG/WPF G1375-87327
PEEK Coated Fused Silica Capillaries – 20 µL/min Flow

Id Length Fitting Fitting
From (A) to (B) Material (mm) (mm) type From type to Part no.
EMPV Flow sensor FS/PK 50 220 WG WG G1375-87301
Flow sensor Injection valve FS/PK 50 550 WG MP G1375-87310
Injection valve Metering device FS/PK 50 200 MP WG G1375-87302
Injection valve Column FS/PK 50 500 MP WPF G1375-87304
Column Detector FS/PK 50 400 WPF G1315-68703
Detector Waste FS/PK 75 700 G1315-68708
µ-switching valve Column FS/PK 50 280 MP WPF G1375-87309
Stainless steel fittings, male (G), Ferrule and stainless steel lock ring PEEK fittings, plugs (MP), 5065-4410 Double winged PEEK nut & ferrule
5063-6593 (W), 5065-4423 (WPF), 5065-4422
PEEK Coated Fused Silica Capillaries – 100 µL/min Flow

Fitting Fitting
Length type type
From (A) to (B) Material Id (mm) (mm) From to Part no.
EMPV Flow sensor FS/PK 100 220 WG WG G1375-87305
Flow sensor Injection valve FS/PK 100 550 WG MP G1375-87306
Injection valve Metering device FS/PK 100 200 MP WG G1375-87312
Injection valve Column FS/PK 75 500 MP WPF G1375-87311
Column Detector FS/PK 75 400 WPF G1375-87308
Detector Waste FS/PK 75 700 G1315-68708
µ-switching valve Column FS/PK 50 280 MP WPF G1375-87309
Loop Capillaries
volume (µL) Agilent Autosampler Part no.
8 G1389A G1375-87303
G1377A G1375-87315
20 G1367E, G4226A G4226-60310
40 G1367D G1377-87310
G1367E, G4226A 5067-4703
G1377A G1377-87300
G1389A G1329-87302
100 G1313A, G1329A/B, 1120, 1220 Infinity LC 01078-87302
G1367A/B/C G1367-87300
G1367E, G4226A 5067-4710
G5667A G5667-60310
900 G1329A/B, G2260A G1313-87303
5000 G2260A G2260-68711
Material
Key description
FS/PK Fused silica/PEEK
W Swagelok 0.8 mm port id
WG Swagelok 0.8 mm port id, small head
SW 4 mm
MP Metric M4 0.8 mm port id, PEEK
WPF Swagelok 0.8 mm port id, PEEK, finger-tight
32
Agilent 1220/1120 Infinity Series LC

Fitting Fitting
Id Length type type
From (A) to (B) Material (mm) (mm) From to notes Part no.
Manual injector Column SS 0.17 180 S S Pre-swaged on A G1313-87305
Heater Column SS 0.17 90 S S G1316-87300
Column Detector SS 0.17 380 S S Pre-swaged on A; G1315-87311
thermal isolation
VWD Waste PK 0.25 500 Finger-tight fittings 5062-8535
not included
(0100-1516, 2/pk)
Detector Waste PTFE 0.8 5000 Finger-tight fittings 5062-2462
not included
(0100-1516, 2/pk)
Material
Key description
SS Stainless steel
PK PEEK
PTFE PTFE
Finger-tight PEEK fitting (SPF), 0100-1516
Tubing
PEEK tubing
• Flexible and easy to cut to desired lengths
• Color coded for easy tracking
• Accepts both stainless steel and PEEK fittings
• 1/16 in od
PEEK tubing
Id (mm) Length (m) Color Code Part no.
0.50 1.5 Orange 0890-1761
0.25 1.5 Blue 0890-1762
0.25 5 Blue 5042-6463
0.18 1.5 Yellow 0890-1763
0.18 5 Yellow 5042-6462
0.13 1.5 Red 0890-1915
0.13 5 Red 5042-6461
Other tubing
description Length (m) Id (mm) Od (mm) Part no.
PTFE tubing, FEP, primary use for valve solutions 5 0.7 1.6 5062-2462
PTFE solvent tubing, primary use for flow path from solvent bottle to degasser, to pump 5 1.5 3.1 5062-2483
Corrugated tubing, polypropylene 5 6.5 5062-2463
Silicone tubing 5 1 3 5065-9978
Clamps and micro clamps, 10/pk 5065-9976
Barbed Y-Connector PP for 3/16 in id tube, 10/pk 5065-9971
For G2258A 1100/1200 Series dual Loop Autosampler
Front seat tube, SS 0.1 0.5 G2258-87316
Back seat tube, SS 0.12 0.5 G2258-87315
Front seat tube, PTFE 0.1 0.2 G2258-87312
Back seat tube, PTFE 0.12 0.25 G2258-87313
Waste tube 0.15 0.8 G2258-87310
Waste tube 0.1 0.8 G2258-87311
Drawing tube assembly for flush solvent G2258-87307
Tubing assembly, solvent flush G2258-87314
For G1313/27/29A 1100/1200 Series Autosampler
Waste tube G1313-87300
Corrugated tubing, polypropylene 5 6.5 5062-2463
For G1387A 1100/1200 Series Micro Autosampler
Waste tube, FEP 0.8 1.6 G1375-87326
34
Accessories
Blades for plastic cutter, 5/pk 8710-1931
Fitting screws, stainless steel, 10-32, 4 mm, 5/pk 5065-9948
PEEK ferrule and stainless steel ring for 2 mm tube, 5/pk 5065-9950
Plastic tubing cutter, 8710-1930
Union, PEEK for 1/8 in od tubing 0100-2410
Waste adapter, 1200 Series autosamplers, gray G1313-43216
rigid Capillary tubing

• Squarely cut, pre-cleaned and ready to use
• Use with stainless steel fittings and ferrules (P/N 5062-2418) or PEEK fittings (P/N 0100-1516)
Fitting screws, 5065-9948
rigid Capillary tubing

Length (mm) Id (mm) unit Part no.
100 0.17 10/pk 5061-3361
200 0.17 10/pk 5061-3362
PEEK ferrules and SS rings, 5065-9950
Fittings and unions

Your best value: Agilent multi-use
capillary and fitting kits with FREE cybertool
Agilent starter kits contain the most widely used capillary tubing, Swagelok connectors, and fittings
in a variety of sizes, so you can find just the right length to minimize your connections and tubing volume.
We’ve also included our flexible stainless steel capillaries to help you make the best LC connections,
regardless of equipment brand. Plus, as a special bonus, all multi-use kits (the first three listed here)
feature a FREE cybertool that puts more than 30 lab essentials at your fingertips.
For high-efficiency columns, it’s best to use narrow-diameter red tubing (0.12 mm id), instead of
conventional green (0.17 mm id) tubing.
Capillary and fittings kits

description Contents Part no.
Capillary/fitting starter kit Kit includes: 5065-9938
for 1100 Capillary LC System Qty 2 – Fused silica/PEEK capillary, 50 µm, 55 cm
Multi-use kit, a collection of various Qty 1 – Fused silica/PEEK capillary, 50 µm, 20 cm
capillaries and tools for use in the lab. Qty 1 – Fused silica/PEEK capillary, 100 µm, 110 cm
Qty 2 – Fused silica/PEEK capillary, 50 µm, 50 cm
Qty 2 – Fused silica/PEEK capillary, 50 µm, 40 cm
Qty 4 – 4 mm stainless steel fitting, male 10-32
Qty 4 – 1/32 in PEEK ferrule and stainless steel lock ring
Qty 4 – PEEK fittings for µ-valves
Qty 4 – Double winged PEEK nuts and 1/32 in ferrules
Cybertool
Capillary/fitting starter kit, 0.12 mm id Kit includes: 5065-9937
Multi-use kit, a collection of various Qty 1 – PEEK capillary, 0.13 mm id, 1.5 m
capillaries and tools for use in the lab. Qty 4 – Stainless steel capillary, 0.12 x 105 mm
Qty 4 – Stainless steel capillary, 0.12 x 150 mm
Qty 3 – Stainless steel ZDV union
Tubing cutter for PEEK capillaries
1/16 in Stainless steel fittings, 10/pk
1/16 in PEEK fittings, color, 10/pk
1/16 in PEEK fittings, 10/pk
Rheotool
Cybertool
(Continued)
36

Capillary/fitting starter kit, 0.17 mm id Kit includes: 5065-9939
Multi-use kit, a collection of various Qty 1 – PEEK capillary, 0.18 mm id, 1.5 m
capillaries and tools for use in the lab. Qty 4 – Stainless steel capillary, 0.17 x 105 mm
Qty 3 – Stainless steel ZDV union
Tubing cutter for PEEK capillaries
1/16 in Stainless steel fittings, 10/pk
1/16 in PEEK fittings, color, 10/pk
1/16 in PEEK fittings, 10/pk
Rheotool
Cybertool
Capillary starter kit, 0.17 mm BIO Kit includes: G5611-68710
Qty 1 – 1.5 m PEEK tubing
PEEK finger-tight fitting, 10/pk
Colored finger-tight PEEK fittings, 10/pk
Qty 3 – Bio-inert union, 600 bar
Qty 1 – Plastic tubing cutter
Qty 1 – Rheotool socket wrench, 1/4 in
Qty 1 – Ti capillary, 0.17 x 400 mm
Qty 2 – PK/SS capillary, 0.17 x 105 mm
Multifunction tool
Rapid Resolution High Throughput Kit includes: 5065-9947
capillary kit Qty 1 – PEEK fitting long for 1/32 in od capillaries
Used for converting an Agilent 1200 Qty 1 – Stainless steel capillary, 0.12 x 280 mm
instrument to the RRLC configuration, Qty 1 – Stainless steel capillary, 0.12 x 150 mm
to enable use of high efficiency columns Qty 1 – Stainless steel capillary, 0.12 x 70 mm
(to 600 bar). Can also be used for
Agilent 1100 instruments. Qty 1 – Needle seat capillary, 12 µL x 0.12 mm
Qty 1 – PEEK capillary, 0.125 x 550 mm
Low dispersion capillary kit for G1316C Kit includes: 5067-4633
Qty 1 – Flexible tubing, 280 mm, 0.12 mm id
Qty 1 – Heater Long Down 0.12 id (1.6 µL internal)
Qty 1 – Carrier for heat exchanger TCC SL Plus
(Continued)

1200 Infinity Series capillary kit Kit includes: 5067-4646
0.12 mm id, G1316C Qty 1 – Column clip set,eight colors
for installing valves G4231A Qty 1 – Stainless steel capillary 0.12 x 340 mm
(2 position/6 ports – 600 bar) Qty 1 – Stainless steel capillary 0.17 x 700 mm
and G4231B
(2 position/6 ports – 1200 bar) Qty 2 – Stainless steel capillary 0.12 x 90 mm
Qty 2 – Stainless steel capillary 0.12 x 150 mm
Qty 1 – Heater Long Up 0.12 id (1.6 µL internal)
0.17 mm id G1316C Qty 2 – PEEK tubing, 1/32 in od, 0.4 mm id, 450 mm
for installing a 2 position/10 port valve Qty 1 – Column clip set,eight colors
G4232A (600 bar) Qty 3 – Stainless steel capillary 0.17 x 150 mm
Qty 4 – Stainless steel capillary 0,17 x 90 mm
0.12 mm id G1316C Qty 1 – Stainless steel capillary 0.12 x 120 mm
for installing a 2 position/10 port valve Qty 2 – Stainless steel capillary 0.12 x 150 mm
G4232B (1200 bar) Qty 1 – Stainless steel capillary 0.12 x 200 mm
Qty 1 – Column clip set,eight colors
Qty 1 – Heater Long Up 0.12 id (1.6 µL internal)
1200 capillary kit for 0.12 mm id Kit includes: G1316-68716
Qty 1 – Low carry over seat
Qty 1 – DAD heat exchanger capillary, 0.12 x 310 mm
(Continued)
38

Stainless steel flexible capillary tubing kit Kit includes: 5061-3304
Qty 10 – 1.6 mm (1/16 in) Stainless steel back ferrules
Qty 10 – 1.6 mm (1/16 in) Stainless steel front ferrules
Qty 10 – Stainless steel fittings
Qty 3 – Stainless steel Swagelok nut, 0.12 x 105 mm
Stainless steel flexible capillary tubing kit Kit includes: 5061-3315
1200 Infinity Series low dispersion Kit includes: 5067-4729
capillary kit for installing a Qty 1 – Stainless steel capillary, 0.12 x 250 mm, with removable fitting
6 position/14 port valve G4234A (600 bar) Qty 1 – Stainless steel capillary, 0.12 x 340 mm, with removable fitting
and G4234B (1200 bar) Qty 1 – Stainless steel capillary, 0.12 x 500 mm, with removable fitting
Qty 8 – Stainless steel capillary, 0.12 x 130 mm, with removable fitting
Qty 1 – Stainless steel capillary, 0.17 x 150 mm, with 2 long pre-swaged fittings
Qty 2 – PEEK tubing, 1/32 in od, 0.4 mm id, 450 mm
Qty 2 – PEEK fitting, special for Chip-LC
Qty 1 – Column clip set, eight colors
Qty 2 – Heater Long Up 0.12 mm id (1.6 µL internal)
Qty 2 – Heater Long Down 0.12 mm id (1.6 µL internal)
Qty 2 – Carrier for heat exchanger TCC
Qty 2 – Fitting holder assembly
Ultra-low dispersion capillary kit Kit includes: 5067-5189
for the 1290 Infinity LC Qty 1 – Stainless steel capillary, 0.075 x 220 mm SV/SLV
Qty 1 – Stainless steel capillary, 0.075 x 340 mm SV/SLV
Qty 1 – Low dispersion needle seat for 1290 Infinity LC
Qty 1 – Heater Long Up 0.075 mm (nominal 1.0 µL)
Qty 1 – 1290 Infinity LC Low Dispersion Kit Note
Ultra-low dispersion capillary kit, 5067-5189
Fittings
description Key unit Part no.
Stainless steel fittings (S), PEEK fittings (SPF), Swagelok 1.6 mm stainless steel fitting S 10/pk 5062-2418
5062-2418 0100-1516/5063-6591 Swagelok 1.6 mm stainless steel fitting, SL 10/pk 5065-4454
long screw
Swagelok 1.6 mm stainless steel fitting, SX 10/pk 5065-9967
extra long screw
Swagelok 1.6 mm screw 10/pk 5061-3303
Stainless steel long fittings (SL), Finger-tight PEEK fitting (SPF), 1.6 mm stainless steel front ferrule 10/pk 5180-4108
5065-4454 0100-1516
1.6 mm stainless steel back ferrule 10/pk 5180-4114
Swagelok 1.6 mm 1200 bar removable fitting SV 1/ea 5067-4733
Swagelok 1.6 mm 1200 bar SLV 1/ea 5067-4738
removable fitting, long screw
Swagelok 1.6 mm 1200 bar SXV 1/ea 5067-4739
Stainless steel extra long fitting (SX), PEEK long fittings (SPFL), removable fitting, extra long screw
5065-9967 5062-8541
Swagelok 1.6 mm finger-tight PEEK fitting SPF 10/pk 5063-6591
Swagelok 1.6 mm PEEK finger-tight fitting SPF 2/pk 0100-1516
Swagelok 1.6 mm PEEK finger-tight SPLF 10/pk 5062-8541
long fitting
Swagelok 1.6 mm PEEK finger-tight fitting SPF 10/pk 5065-4426
Stainless steel nut, Finger-tight PEEK fittings (SPF), (mixed colors)
5061-3303 5065-4426
Swagelok 1.6 mm finger-tight PEEK SPF 10/pk 5042-6500
double winged fitting
Rheflex fitting
Stainless steel front ferrules, Double winged fitting (SPF), Rheflex fitting (mixed color)
5180-4108 5042-6500 Swagelok 1.6 mm stainless steel blanking nut S 1/ea 01080-83202
Material
Key description
Stainless steel back ferrule, PEEK RheFlex fittings (SPF), S Swagelok 1.6 mm port id
5180-4114 0100-1631 SL Swagelok 1.6 mm port id, long
SV Swagelok 1.6 mm port id, 1200 bar
1200 bar removable fitting (SV), PEEK RheFlex fittings (SPF), SLB Swagelok 1.6 mm port id, long bio
5067-4733 0100-2175 SXV Swagelok 1.6 mm port id, extra-long, 1200 bar
SPF Swagelok 1.6 mm port id, PEEK, finger-tight
SPLF Swagelok 1.6 mm port id, PEEK, long, finger-tight
1200 bar removable long fitting (SLV), Stainless steel blanking nut,
5067-4738 01080-83202
1200 bar removable extra long fitting

(SXV), 5067-4739
40
Fittings
description Key unit Part no.
Swagelok 1.6 mm stainless steel screw S 6/pk 5067-1540 Stainless steel nut and PEEK Ferrule and stainless steel lock ring
for PEEK ferrule 5067-1547 ferrule, 5067-1540 (W), 5065-4423
Swagelok stainless steel screw SP 1/ea 0100-2086
with 1.6 mm PEEK ferrule
1.6 mm PEEK ferrule for 5067-1540 screw SP 6/pk 5067-1547
Swagelok 1.6 mm finger-tight SPF 10/pk 5042-8957
polyketone fitting PEEK ferrule, PEEK fittings, plugs (MP),
M4 stainless steel screw for stainless steel M 6/pk 5067-1558 5067-1547 5065-4410
ferrule 5067-1557
0.8 mm stainless steel ferrule M 6/pk 5067-1557
for 5067-1558 screw
Swagelok 1.6 mm plastic blank nut M 1/ea 0100-1259
Swagelok 1.6 mm ST screw, 4 mm head G 10/pk 5063-6593 Finger-tight polyketone fitting
0.8 mm PEEK ferrule and stainless steel ring W 10/pk 5065-4423 (SPF), 5042-8957
for 5063-6593 screw Double winged PEEK nut & ferrule
(WPF), 5065-4422
M4 0.8 mm PEEK fitting MP 6 fittings, 5065-4410
2 plugs
Swagelok 0.8 mm finger-tight PEEK WPF 10/pk 5065-4422
double winged fitting
M4 stainless steel screw,
Swagelok 0.8 mm finger-tight PEEK WPFL 1/ea 5022-6536 5067-1558
long fitting
Swagelok 2.0 mm stainless steel screw, 5/pk 5065-9948 PEEk fitting, long (WPFL),
4 mm head 5022-6536
2.0 mm PEEK ferrule and stainless steel ring 5/pk 5065-9950
Stainless steel ferrule (M),

Material 5067-1557
Fitting screws,
Key description 5065-9948
SP Swagelok 1.6 mm port id, PEEK
SPF Swagelok 1.6 mm port id, PEEK, finger-tight Plastic blank nut,
W Swagelok 0.8 mm port id 0100-1259
PEEK ferrules and SS rings,
G Small head SW 4 mm 5065-9950
WG Swagelok 0.8 mm port id, small head SW 4 mm

MP Metric M4 0.8 mm port id, PEEK
WPF Swagelok 0.8 mm port id, PEEK, finger-tight Stainless steel screw,
5063-6593
unions
description use with Part no.
ZDV union, no fittings Nano LC 5022-2145
Adapter, PEEK, 0100-2298
ZDV union, 5022-2145 ZDV universal union, stainless steel, Standard LC 5022-2184
no fittings
ZDV union, with fittings Standard LC 0100-0900
ZDV union, PEEK with fittings Bio-applications 0100-2441
High flow union, no fittings Prep LC 5022-2133
PEEK adapter 1/4-28 to 10-32 0100-1847
ZDV universal union, 5022-2184 Barbed Y-connector PP, 5065-9971 Adapter, PEEK int. 1/4-28 to ext. 10-32 0100-2298
Barbed Y-connector PP 5065-9971
for 3/16 in id tube, 10/pk
Adapter, union PEEK 1/4-28 5042-8517
Adapter, male Luer to female 1/4-28 5042-8518
SS adapter Swagelok to 1/4-28 5023-1803
ZDV union with fittings, 0100-0900 Union, female to female, 5042-8517
T-connector, PEEK, swept volume 0.57 µL For 1/16 in 5022-2144
od tubing
Micro T-connector, PEEK, swept volume 5042-8519
29 mL, with 1/32 in id fittings
Bio-inert union, stainless steel Bio-applications 5067-4741
with PEEK insert 600 bar
ZDV union, PEEK with fittings, 0100-2441
High flow union, 5022-2133 Adapter, male Luer to female,

5042-8518
PEEK adapter, 0100-1847 Adapter, female to male, 5023-1803
Bio-inert union, 600 bar, 5067-4741
Micro T-connector, PEEK, 5042-8519
42
Tips and tools for creating

the best possible connections
how do I tighten fittings correctly?
The chart below describes the steps you’ll need to follow.
Fitting type First Connection Further connection

Stainless steel 1. Slide the screw, along with the back and front Finger-tighten, then tighten an extra ¼ to ½ turn
ferrules, onto the capillary. with a slitted socket wrench or Rheotool
2. Insert capillary into the port until it is completely (P/N 8710-2391). (If using a torque wrench,
seated in the end fitting. tightening torque should be between
3. Finger-tighten the nut until the capillary 1.5 and 3.0 Nm).
does not rotate.
4. Tighten the nut ½ to ¾ turn with a slitted socket
wrench or Rheotool (P/N 8710-2391). If you are
using a torque wrench, tightening torque should be
between 1.5 and 3.0 Nm)
Polymeric finger-tight: PEEK and polyketone 1. Slide the screw and ferrule onto the capillary. Additional tightening if necessary
2. Insert capillary into the port until it is completely
seated in the end fitting. See “good connections” step by step
3. Finger-tighten the nut until the capillary
does not rotate.
4. Make sure the capillary cannot be easily pulled out.
1200 bar removable fitting 1. Slide the screw, along with the back and front Finger-tighten, then tighten an extra ¼ to ½ turn
ferrules, onto the capillary. with a socket wrench.
seated in the end fitting.
3. Finger-tighten the nut until the capillary For stainless steel capillaries, if using a torque
does not rotate. wrench, tightening torque should be between
4. Tighten the nut about ¾ turn with a socket wrench. 1.0 and 1.2 Nm.
5. For stainless steel capillaries, if using a torque
wrench, tightening torque should be between For stainless steel coated PEEK capillaries,
1.0 and 1.2 Nm. if using a torque wrench, do not exceed 0.8 Nm.
6. For stainless steel coated PEEK capillaries,
do not exceed 0.8 Nm.
PEEK/stainless steel 1. Slide the screw, along with the back and front Finger-tighten, then tighten an extra ¼ to ½ turn
ferrules, onto the capillary. with a socket wrench.
seated in the end fitting.
3. Finger-tighten the nut until the capillary
does not rotate.
4. Tighten the nut about ½ turn with a socket wrench.
how do I prepare the perfect fitting connection?

Problems with stainless steel tubing connections are commonly mistaken for column issues – and are the
source of many calls to Agilent’s technical support line.
Connection problems often arise because different manufacturers supply different types of fittings, as you
can see in the following diagram:
Common hPLC column connectors by manufacturer
Swagelok valco rheodyne
Parker waters upchurch

(non-Acquity) (IdEX)
Ideally, you should use the fittings recommended by your column manufacturer. Most analytical reversed phase columns are compatible with Swagelok
or Parker-type fittings when correctly seated in the column.
Stainless steel fittings are the best choice for permanent, high-pressure sealing. Agilent recommends Swagelok-type fittings with front and back ferrules,
because they deliver the best performance for Agilent LC systems – and can be used on most instrument connections, including valves, heaters, and
column connections.
For lower-pressure operation, finger-tight polymeric fittings allow you to easily adjust the end-fitting to seat the capillary into the column properly –
helping avoid extra-column voids and leaks. These connectors can be tightened without wrenches. High-pressure fittings, which are designed
to be removed and resealed, are also available for pressures up to 1200 bar.
44
how do I align the connection properly?

The importance of correct tubing length
(relative to the distance from the end of the Examples of incorrect fittings
tubing to the bottom of the ferrule) cannot be
overstated. If the tubing is too long, the ferrule
will not seat properly and leaks will occur.
Likewise, if the tubing is not pushed in far Ferrule cannot seat properly Mixing chamber
enough, a void occurs, creating extra-column

volume that acts as a “mixing chamber”,
which can cause peak tailing, and/or poor
peak shape.
Always make sure you use the correct fittings, If dimension X is too long, If dimension X is too short,
leaks will occur a dead-volume or mixing
and that all fittings are properly seated in the chamber, will occur
column end fitting – especially if you use
columns from different manufacturers.
A good connection, step by step

This connection uses a Swagelok-type fitting which is good for connections to the instrument. For column connections, it is ideal to use polymeric
finger-tight fittings, which are removable, or the 1200 bar removable fitting.
1. Select a nut that is long enough for the fitting you’ll be using.
2. Slide the nut over the end of the tubing.
3. Carefully slide the ferrule components on after the nut, then finger-tighten the assembly while making sure the tubing is completely seated in the
bottom of the end fitting.
4. Use a wrench to gently tighten the fitting; this will force the ferrule to seat onto the tubing, ½ to ¾ turn with a wrench. Do not over-tighten!
That will shorten the useful life of the fitting.
5. Once you are sure your fitting is complete, loosen the nut and inspect the ferrule for correct position on the tubing.
note: Avoid re-using a capillary on a different location. The position of the fitting is done the first time it is screwed on a port and all the ports are
not strictly identical.
1. 2. 3. 4. 5.
What are the benefits of a small internal diameter?

The roughness of the internal capillary surface is a function of the capillary’s outer diameter. A smaller outer
diameter provides better smoothness for the internal capillary surface.
Agilent’s unique stainless steel LC capillary connections for liquid chromatography are designed for small
inner diameters, reducing backpressure and blocking. To make these connections compatible with standard
1/16 in capillaries, we weld a tight, flat sleeve at both ends. Agilent’s unique laser welding process ensures
that the capillary ends are absolutely flat, eliminating any chance of additional dead volume.
Which capillary connection size is right for me?

Choose the shortest practical length and narrowest diameter that your application and system allows.
For 4.6 mm id columns, 0.17 mm capillaries are usually sufficient, but for narrower id columns like 2.1 mm,
0.12 mm id capillaries are used to keep sample dispersion as low as possible. There are also new ultra-low
dispersion capillaries (0.075 mm id) for use with the 1290 Infinity LC.
How can I get rid of extra-column volume effects?

Extra-column volume effects can be caused by capillaries that are too long, so try a shorter- length capillary.
For low-volume, high efficiency columns (e.g., Agilent ZORBAX Eclipse Plus C18, 2.1 x 50 mm, 1.8 µm),
replace 0.17 mm id (green) capillaries with 0.12 mm id (red).
For additional information on extra-column volume and its effect, see our
application note "Reduce Tubing Volume to Optimize Column Performance" at
www.agilent.com/chem/library/applications/5990-4964En.pdf
What should I do about high backpressure?

High backpressure issues are usually not caused by capillaries. However, you should check to make
sure the capillary isn’t blocked, and replace if necessary, as part of your troubleshooting.
How can I reduce peak broadening, related to my capillary?

In addition to optimizing the length and diameter of the capillary, proper positioning in the fitting is
important. The distance between the end of the capillary and the bottom of the ferrule may be too long
or too short (creating a void), resulting in a poor connection. This can cause leaks or peak shape issues,
such as broadening when the sample mixes in the void. A re-usable fitting can be adjusted, but with
stainless steel a new fitting will need to be made.
How do I eliminate detector spikes and bubbles?

Check for air leaks at the capillary connections, and tighten as needed.
46
Pump Supplies
Regular pump maintenance helps lower operating costs and generate precise results that make
you feel confident.
You can count on Agilent isocratic, binary, quaternary, capillary, and preparative pumps for superior flow
and composition stability. And by following a regular maintenance routine, you can also count on maximum
uptime and a steady, accurate solvent flow for the life of the pump.
Sapphire piston and seals
Pump routine Maintenance Procedures

• Replace the seals and pistons
• Replace the PTFE frit
• Replace the cartridge in the Active Inlet Valve
• Clean the outlet ball valve
• Clean or replace the solvent inlet frits
Routine pump maintenance should be done on a regular basis to keep your Agilent LC system performing
at its optimum. You can perform all maintenance procedures at once or as needed. Some parts may need
to be replaced more than others depending upon your application and solvent preparation procedures.
Pump routine Maintenance Procedures
Symptom Cause Solution

Solvent dripping out of waste outlet when valve closed Leak on pump head Exchange the purge valve frit or the purge valve
Pressure ripple unstable Dirty active inlet valve cartridge Run leak test for verification and exchange the active inlet
valve cartridge
Leak on pump head Run leak test for verification and exchange the outlet ball
valve sieve or the complete valve
Gradient performance problems, intermittent pressure Solvent filter is blocked Change the solvent filter
fluctuations
A pressure drop of >10 bar across the frit (5 mL/min H2O Dirty frit Exchange the purge valve frit or the purge valve
with purge valve open) indicates blockage
Leaks at lower pump head side High seal wear Run leak test for verification and exchange the pump seals
Unstable retention time
Pressure ripple unstable
Seal lifetime shorter than normally expected Scratch on plunger Check plungers while changing the seals
Loss of wash solvent Leaky wash seals Exchange the wash seals
Purge valves
description Comments Part no.
Purge valve with PTFE frit, For G1310A, G1311A, G1312A, G1376A, G2226A G1311-60009
400 bar
Purge valve with PTFE frit For 1120 G4280-60031
Purge valve assembly, G1311-60009 Purge valve with PTFE frit For G1311C, G1312C, 1220 G4280-60061
Purge valve with PTFE frit For G1310B, G1311B, G1312B, G4302A, G1312-60061
PTFE frit For G1310A, G1311A, G1312A, G1376A, G2226A, 01018-22707
1120, 1220, 1220, G1310B, G1311B, G1312B, G1311C,
G1312C, G4202A
Seal cap Not suitable for outlet ball valves with integrated seal 5067-4728
Seal for purge valve For 1120 0905-1192
Purge valve actuator For 1120 G4280-60033
Bio-inert purge valve For G5611A G5611-60061
5 position / 7 port rotor seal For G4220A, G4220B 5068-0005
Purge valve with PTFE frit, G4280-60061
5 position / 7 port stator For G4220A, G4220B 5068-0004
Multi purpose valve head For G4204A 5067-4174
Stator for 5067-4174 For G4204A 5068-0122
multi purpose valve head
Rotor for 5067-4174 G4204A 5068-0123
multi purpose valve head
Stainless steel filter assembly For G1361A 5022-2192
with PEEK ring,
2 µm pore size
Open end wrench, 14 mm To remove purge valve 8710-1924
PTFE frits, 01018-22707
tIPS & tOOLS
Information on maintenance procedures can be found at www.agilent.com/chem/LCmaintenancenotes
48
Inlet and Outlet valves
Inlet valves
Active inlet valve For G1310A, G1311A, G1312A, G1376A, G1312-60025
without cartridge G2226A, G1312B, G1312C
Cartridge for active inlet valve For G1310A, G1311A, G1312A, G1376A, 5062-8562 Active inlet valve without cartridge, G1312-60025
400 bar G2226A, G1312C
Cartridge for active inlet valve For G1312B G1312-60020
600 bar
Bio-inert active inlet valve For G5611A G5611-60025
Bio-inert cartridge for active For G5611A G5611-60020
inlet valve, 600 bar
Cartridge, 400 bar, 5062-8562
Inlet valve for For G4204A G4204-60022*
1290 quaternary pump
Valve assemblies (inlet/outlet) For G1361A G1361-60012
for prep pumps
Passive inlet valve For G1310B, G1311B, G1311C, 1120, 1220, G1312-60066*
G4302A
Passive inlet valve For G4220A, G4220B G4220-60022*
Passive inlet valve, G1312-60066
*Inlet valve with integrated seal.
Outlet valves
Outlet ball valve For G1310A, G1311A, G1312A,G1376A, G2226A, G1312-60067*
Seal cap, 5067-4728
1120, 1220, G1310B, G1311B, G1311C, G1312B,
G1312C, G4302A
Outlet ball valve For G4220A, G4220B, G4204A G4220-60028*
Bio-inert outlet ball valve For G5611A G5611-60067*
Valve assemblies (inlet/outlet) For G1361A G1361-60012
for prep pumps
*Outlet ball valve with integrated seal. Outlet ball valve, G1312-60067
Outlet ball valve, G4220-60028
tIPS & tOOLS

Information on maintenance procedures can be found at
www.agilent.com/chem/LCmaintenancenotes
Pistons and Seals

Agilent pistons are made from a high purity, monocrystalline sapphire for maximum durability. Although
ceramic pistons can be manufactured at a lower cost, ceramic is a sintered, polycrystalline material, which
can cause undesirable variations during the production process. Agilent sapphire pistons are:
• Meticulously cut at just the right angle, making them durable – and long lasting
• Precisely aligned in their stainless steel holder to minimize wear on the piston and seal
Sapphire piston and seals Agilent seals are designed to fit snugly around our pistons, and are capable of adapting to a wide range
of flow rates and pressures. Agilent piston seals are:
• Spring-loaded and engineered to deliver optimal performance over highly dynamic flow and
pressure ranges
• Manufactured from a proprietary polymer blend, and feature a spring made from the same high-quality
stainless steel that is used in our pump's flow path
The combination of our piston and seal has undergone extensive testing under temperature stress,
with all common HPLC solvents, and in many instruments. More importantly, they yield consistent,
reproducible results.
Pistons
Sapphire plunger For G5611A, 4302A 5067-4695
Zirconium based For G4220A, G4220B, G4204A 5067-4678
ceramic plunger
Sapphire plunger For G1310A, G1311A, G1312A, G1376A, G2226A, 1120, 5063-6586
1220, G1310B, G1311B, G1312B, G1311C, G1312C
Sapphire plunger For G1361A G1361-22402
50
Seals
Bio-inert piston seal For G5611A G5611-21503
Piston seal polyethylene For G4220A, G4220B, G4204A 0905-1719
Piston seal graphite filled For G1310A, G1311A, G1312A, G1376A, G2226A, 5063-6589
PTFE (reversed-phase) 1120, 1220, G1310B, G1311B, G1312B, G1311C, Piston seals, 5063-6589
(2/pk) G1312C, G4302A
Piston seal Polyethylene For G1310A, G1311A, G1312A, G1376A, G2226A, 0905-1420
(normal phase) 1120, 1220, G1310B, G1311B, G1312B, G1311C,
G1312C, G4302A
Piston seal For G1361A 5022-2188
Specific parts for 1290 Infinity LC pumps

Jet Weaver 35 µL/100 µL For G4220A, G4220B, G4204A G4220-60006
Jet Weaver 380 µL For G4220A, G4220B, G4204A G4220-60012
Clamp for in-line filter For G4204A G4204-40000
Outlet filter 1290 quaternary pump For G4204A G4204-60004
Inlet valve for flush pump 5067-4717
Outlet valve for flush pump 5067-4716
Tubing kit 270 mm, 2/pk 5067-4661
Tubing kit 140 mm, 2/pk G4220-60035
Shut-off valve For G4220A, G4220B, G4204A 5067-4124
Inline pressure relief valve kit For G4220A, G4220B G4212-68001
Solvent selection valve bridge tube 5067-4697
Pressure relief valve For G4220A, G4220B G4212-60022
PEEK seal for inlet weaver assembly For G4204A G4204-40005
Support ring For G4220A, G4220B G4220-60015
Seal keeper For G4220A, G4220B G4220-60016
tIPS & tOOLS
Seal wash
The routine use of highly concentrated buffer solutions (100 mM) will reduce the life of seals and pistons in
your pump. Counteract the problem with one of Agilent's seal wash kits, which flush the back of the seal
with a wash solvent. note: Water/isopropanol (90/10) is recommended as the wash solvent.
Peristaltic pump, 5042-8507
Seal wash
Peristaltic pump cassette For 1100/1200/1200 RRLC and 1260 Infinity LC pumps 5042-8507
with silicone tubing
Silicone tubing, 1 mm id, 5065-9978
3 mm od, 5 m
Peristalitic pump For 1100/1200/1200 RRLC and 1260 Infinity LC pumps 5065-9952
with ChemSure tubing
ChemSure tubing 5042-8954
for peristaltic pump
Peristalitic pump with ChemSure tubing,
wash Seal and wash Keeper
5065-9952
Wash seal For 1100/1200/1200 RRLC, 0905-1175
1120 and 1260/1220 Infinity LC pumps
Seal keeper For 1100/1200/1200 RRLC and 1120 pumps 5001-3743
Bio-inert seal keeper For G5611A LC pump G5611-26210
Wash seal gasket, 6/pk For 1100/1200/1200 RRLC, 5062-2484
1120 and 1260/1220 Infinity LC pumps
Wash seal PE For 1290/1260/1220 Infinity LC pump 0905-1718
Support ring For 1290/1260/1220 Infinity LC pump G4220-63010
Support ring For 1290 Infinity pump without seal wash G4220-63015
Backup ring for seal holder For 1290/1260/1220 Infinity LC pump G4220-24013
Seal keeper For 1290/1260/1220 Infinity LC pump G4220-26210
tIPS & tOOLS
52
Solvent reservoir and Supplies
Solvent reservoir and Supplies

Solvent reservoir
Solvent reservoir, 1 L 9301-1420
Solvent reservoir, 1 L, with cap 9301-1421
Solvent reservoirs
Solvent reservoir, 1 L, F29/32 9301-0656
Solvent reservoir, amber, 1 L 9301-1450
Solvent bottle, clear, 2 L, 2 inlets 5065-4421
Solvent bottle, amber, 2 L 9301-6341
Solvent bottle, clear, 2 L 9301-6342
Bottle head Assembly
Bottle head assembly for screw bottle G1311-60003
Bottle head assembly for F29/32 tapered solvent bottle G1312-68716
Bottle head assembly with tubing and filter G1376-60003
For capillary and nano systems (with stainless steel solvent filter)
Bottle head assembly for prep system G1361-60022 Prep bottle, 5065-4421
Bottle head assembly G4220-60007
Bottle cap with 3-hole insert 5063-6531
Solvent bottle, amber, 9301-6341
Cleaning the Solvent Filter

If the filter is in good condition, the solvent will freely drip out of the solvent tube (hydrostatic pressure).
If the solvent filter is partially blocked, only very little solvent will drip out of the solvent tube.
Caution: Small particles can permanently block the capillaries and valves of the module.
Glass filter, 5041-2168 • Always filter solvents

• Never use the module without solvent inlet filter
Solvent Filters
Frit Inlet tube Od
description recommended use Part no. Frit Adapter Part no. Id (mm) (mm)
Glass filter, solvent inlet, Analytical scale, 5041-2168 Frit adapter, PTFE, 3 mm, 4/pk 5062-8517 5 3.2
20 µm pore size micro scale
Glass filter, solvent inlet, Preparative LC 3150-0944 Frit adapter, PTFE for 4.7 mm od tubing G1361-23205 7 4.7
40 µm pore size
Glass filter, solvent inlet, Preparative LC 3150-0944 Frit adapter, PTFE, 4 mm G1361-23204 7 4
40 µm pore size
Glass filter, solvent inlet, For G2258A Dual 3150-0944 Frit adapter, PTFE for 3.2 mm od tubing G2258-23201 7 3.2
40 µm pore size Loop Autosampler
Solvent inlet filter, stainless steel For use in capillary 01018-60025
and nano systems
Frits and Adapters

Solvent mixer, 1100 Series G1312-87330
Solvent mixer, short, 200 µL 5067-1565
Frit adapter, PTFE, for 4.7 mm od tubing G1361-23205
Filter frit adapters, 5062-8517
Frit adapter, PTFE, for 3.2 mm od tubing G2258-23201
For G2258A Dual Loop Autosampler
O-ring, Viton, 30 mm 0905-1516
Stainless steel filter assembly with PEEK ring, 2 µm pore size 5022-2192
Solvent inlet filter, 01018-60025
54
Safety Caps
Open or partially covered solvent bottles can lead to the evaporation of solvents and harmful solvent vapors.
Prevent solvent evaporation and possible chemical spills with solvent safety caps from Agilent. These safety
caps have been designed for optimal sealing with an integrated exhaust valve providing pressurization
during solvent extraction and allowing proper solvent flow to your HPLC system. The exhaust valve contains
a PTFE membrane to prevent contamination of your solvents from dirt and dust particles.
• Designed to fit all solvent bottles

• Constructed of PTFE and PFA for high chemical resistance
• Caps rotate freely, preventing tube twisting during bottle exchange 10 L waste can assembly, S60, 5043-0243
• Available in GL40, GL45, S60 and NS29/32 thread sizes
Installation details for Solvent Safety Caps

Installation Guide for Standard Safety Caps – 4 Simple Steps to Install a Safety Cap
1. Guide the solvent tube through the fitting on the safety cap
2. Re-connect the solvent inlet filter to the solvent tube (open end)
3. Screw the safety cap on top of your solvent bottle
4. Adjust the length of the solvent tube in the solvent bottle and fix the tube
by tightening the fitting
Installation Instructions for Safety Caps with Stopcocks Safety Cap I, 5043-0223
These caps have a shut-off valve which can be closed. This keeps the solvent tube
in the bottle during maintenance activities with no risk of having solvent dropping out
of the flow path.
4 Simple Steps to Install a Safety Cap with Stopcocks

1. Cut the solvent tube in 2 parts
2. Connect the upper part to the fitting (red or blue) on the safety cap (Top)
3. Cut a suitable length and connect the lower part to the fitting on the safety cap (Bottom)
Safety Cap II, 5043-0224
4. Screw the safety cap on top of your bottle
Safety Caps and Accessories

description Kit Contents Part no.
Safety Cap II with 2 ports – Includes 1 safety cap, 2 fittings 3.2 mm PFA, 5043-0221
NS29/32 1 venting valve with 1 µm PTFE membrane
Safety Cap I with 1 port – Includes 1 safety cap, 1 fitting 3.2 mm PFA, 5043-0223
Safety Cap IV for GL45 bottles, 5043-0226 GL 45 1 venting valve with 1 µm PTFE membrane
Safety Cap II with 2 ports – Includes 1 safety cap, 2 fittings 3.2 mm PFA, 5043-0222
GL 45 1 venting valve with 1 µm PTFE membrane
Safety Cap I with 1 port Includes 1 safety cap, 1 fitting 4.7 mm PFA, 5043-0300
for prep – GL45 1 venting valve with 1 µm PTFE membrane
Safety Cap I Includes 1 safety cap, 1 fitting 2.3 mm PFA, 1 fitting 2.3 mm 5043-0225
with 1 stopcock – GL45 PTFE, 1 venting valve with 1 µm PTFE membrane
Safety Cap II Includes 1 safety cap, 2 fittings 2.3 mm PFA, 5043-0224
Safety Cap IV for S60 threaded waste bottles, with 2 stopcocks – GL 45 2 fittings 2.3 mm PTFE, 1 venting valve
5043-0227
Safety Cap IV with 4 ports – Includes 1 safety cap, 4 fittings 2.3 mm PFA, 5043-0226
1 leak port – GL45 4 fittings 1.6 mm PFA, 4 fittings 2.3 mm PFA, 1 leak hose.
Must be used with charcoal filter, P/N 5043-0230.
Safety Cap IV with 4 ports – Includes 1 safety cap, 4 fittings 2.3 mm PFA, 5043-0227
1 leak port – S60 4 fittings 1.6 mm PFA, 1 leak hose. Must be used
with charcoal filter, P/N 5043-0230.
5 L waste can GL45 Includes 5 L waste can, 1 safety cap (5043-0226), 5043-0242
with 4 ports and 1 leak port 2 ports collector PTFE. Must be used with charcoal filter,
P/N 5043-0230.
10 L waste can S60 Includes 10 L waste can, 1 safety cap (5043-0227), 5043-0243
with 4 ports and 1 leak port 2 ports collector PTFE. Must be used with charcoal filter,
P/N 5043-0230.
5 L waste can assembly, GL45, 5043-0242
Safety Waste Set S50 Includes 5 L space saving waste can, 1 safety cap, 5043-0831
4 fittings 2.3 mm PFA, 1 x 6.4 mm tubing connector,
Charcoal filter (48 g)
Venting valve with 1 µm 5043-0232
PTFE membrane*
Thread Adapter GL45-GL40 5043-0234
(PTFE)
Thread Adapter PTFE, 5043-0272
GL45-GL38
Thread adapter 5043-0832
GL45-GPI38-23, (PTFE)
Safety funnel + cover S60, 5043-0828
PEHD, conductive
Safety funnel + cover S60, 5043-0829
10 L waste can assembly, S60, 5043-0243 PEHD
Tool for fitting 5043-0830
*Valve change is recommended every six months
56
replacement Parts for Safety Caps

description unit Part no.
Fitting for 3.2 mm tube, PFA 6/pk 5043-0255
Fitting for 2.3 mm tube, PFA 5/pk 5043-0228
Fitting for 1.6 mm tube, PFA 5/pk 5043-0229 2.3 mm fittings to connect waste tubes
from the purge valve, 5043-0228
Charcoal filter, 48 g 5043-0230
Screw plug 1/4 in, PTFE 5043-0231
Venting valve with 1 µm PTFE membrane* 5043-0232
Screw plug 1/8 in, PTFE 5/pk 5043-0233
2 ports collector, PTFE 5043-0235
5 L waste can, GL45 5043-0236
10 L waste can, S60 5043-0237 1.6 mm fitting to connect wash tubes going to the
peristaltic pump of the High Performance
3 port collector 5043-0238 ALS/Wellplate Sampler, 5043-0229
Adapter for two 3.2 mm tubes 5043-0239
*Valve change is recommended every 6 months
Charcoal filter, 48 g, 5043-0230
Screw plug, 1/4 in, PTFE, 5043-0231
Replacement PTFE filter

(replace every six months), 5043-0232
Screw plug, 1/8 in, PTFE, 5043-0233
2 ports collector (PTFE), 5043-0235
AgileNt PArts AND suPPlies
Vacuum Degassers
A vacuum degasser is recommended for:
• Maximum sensitivity in the low UV wavelength range

1200 Series Vacuum Degasser
• High injection precision
• High retention time reproducibility
• Flow rates below 0.5 mL/min
Vacuum Degasser Care

• To generally clean the vacuum degasser tubing, flush the system with isopropanol
• Flush the degasser with water after using buffers
Mounting tool, 0100-1710 • Speed solvent changes by drawing solvent through the degasser and tubing with syringe adapter kit
Vacuum Degassers
Description Comments Part No.
Tubing kit, degasser to pump, 4/pk, 30 cm pieces of tubing For G1322A, G1379A/B G1322-67300
with screws and bushings
Inlet tubing For Agilent 1260 Infinity 5067-5378
Quaternary Pump VL
Plastic tubing cutter, 8710-1930 Mounting tool for flangeless nut For G1322A, G1379A/B 0100-1710
Plastic tubing cutter For G1322A, G1379A/B 8710-1930
Tefzel ferrules and SS lock rings, 1/8 in, 10/pk For G1322A, G1379A/B 5063-6598
PPS nuts, 1/8 in, 1/4-28 thread, 10/pk For G1322A, G1379A/B 5063-6599
Union, 1/4-28 thread, polypropylene For G1322A, G1379A/B 5022-2155
PTFE solvent tubing, 5 m, 1.5 mm id, 3 mm od For G1322A, G1379A/B 5062-2483
Disposable syringes, 20 mL, 10/pk For G1322A 5062-8534
Syringe adapter, 1/16 in od, 2 in long For G1322A 9301-1337
Micro vacuum degasser tubing kit For G1379A G1379-67310
Ferrules and rings, 5063-6598
Micro vacuum degasser tubing kit For G1379B 5042-8922
Online degasser accessory kit For G1322A, G1379A/B G1322-68705
Includes 8 screws, 8 bushings, 4 markers, tubing,
syringe and syringe adapter
Vaccum chamber (2 channel) For G1379A, G1379B 5067-4798
Tubing kit for 5067-4798 vaccum chamber For G1379A, G1379B 5067-5380
Vaccum chamber replacement kit For G1379A, G1379B 5067-5383
Includes two 5067-4798 and one 5067-5380
PPS nuts, 5063-6599
58
Pump Kits
Pump Kits
Description Kit Contents Part No.
start-up Kits
Pump start-up kit Includes 1 outlet cap, 5 PTFE frits, 4 piston seals, 1 outlet gold seal, 2 glass solvent inlet G1311-68710
For 1100/1200/1220 RRLC pumps filters, 20 µm, and 1 cartridge for active inlet valve
Nanoflow LC start-up kit Includes PEEK coated fused silica capillaries, column and fittings to start up a Nanoflow G2228-68700
LC System
seal Wash Kits
Active seal wash kit Includes 2 wash seal gaskets, 2 pump seals, peristaltic pump (includes pump cassette G1311-68711
and motor), 2 seal keepers, 2 support ring assemblies, seal insert tool and silicone tubing
Active seal wash kit Includes 4 wash seal gaskets, 4 pump seals, 2 peristaltic pumps (includes pump cassette G1312-68711
and motor), 4 seal keepers, 4 support ring assemblies, seal insert tool and silicone tubing
Continuous seal wash kit Includes 2 wash seal gaskets, 4 m flex tubing, 2 pump seals, 1 flow regulator, 2 seal 01018-68722
For 1100/1200/1200 RRLC pumps keepers, 2 support ring assemblies, 20 mL luer lock syringe, seal insert tool and abrasive
paper
Seal wash kit for 1260 Capillary/Nano pump Includes 3 adaptor luer/barbs, 2 film washers, 1 insert tool, 2 seal pumps, 1 clamp hose, G1376-60005
2 seal wash, 1 syringe, 2 support ring 1290 Infinity LC w/seal wash, 2 seal keepers for
1290 Infinity LC, and 2 backup rings for seal keeper 1290 Infinity
Seal wash PM kit Includes 2 PTFE wash seals (P/N 0905-1175), 2 gasket wash seals (P/N 01018-07102) G1310-68742
For 1260 Infinity LC pumps
PM kit for seal wash option Includes 2 wash seals and 1 pack of 6 wash seal gaskets G1310-68731
Preventive Maintenance Kits
For 1260 Infinity LC isocratic or quaternary Includes 1 PTFE pump seal (P/N 0905-1503), PTFE frits, 5/pk (P/N 01018-22707), G1310-68741
and 1220 pumps 1 seal cap (P/N 5067-4728)
For 1260 Infinity LC binary pump Includes 1 PTFE pump seals (P/N 0905-1503), PTFE frits, 5/pk (P/N 01018-22707), G1312-68741
1 seal cap (P/N 5067-4728), sieves for outlet valve, 10/pk (P/N 5063-6505)
For 1100/1200 isocratic or quaternary pumps Includes piston seal, PTFE frits, and 2 seal caps G1310-68730
For 1290 Infinity pump Includes pump seal exchange tool, torque wrench, and hex bit 5067-4699
For Bio-inert quaternary pump Includes bio-inert piston seal, 5/pk PTFE frits, seal cap assembly, film washer, peristaltic G5611-68741
pump, silicone tubing, Bio-inert wash seal
(Continued)
Pump start-up kit, G1311-68710
WWW.AgileNt.CoM/CheM/lC 59
Pump Kits
For 1100/1200 binary pump Includes 4 piston seals, PTFE frits, 2 sieves, and 3 seal caps G1312-68730
For G1376A capillary pump Includes 4 pump seals, 1 stainless steel frit, and 4 seal cap assemblies G1376-68710
For 1100/1200 and Includes 1 filter cup (P/N 3150-0942), 4 seal prep flange (P/N 5022-2188), G1361-68710
1260 Infinity LC prep pump 1 filter assembly (P/N 5022-2192), 1 peristaltic pump
For 1120 manual injector systems Includes 1 piston seal, 5 PTFE frits, 1 PEEK rotor seal, and 2 seal cap assemblies G4280-68710
For 1220 manual injector systems Includes piston seals, PTFE frits, rotor seal, and 2 seal cap assemblies G4280-68750
For 1220 automated injector systems Includes piston seals, PTFE frits, rotor seal, 2 seal cap assemblies, needle and needle seat G4280-68770
For 1120 automated injector systems Includes 1 piston seal, 5 PTFE frits, 1 Vespel rotor seal, 1 needle, 1 needle seat, and G4280-68730
2 seal cap assemblies
Extended PM kit Includes 2 piston seals (P/N 5063-6589), PTFE frits, 5/pk (P/N 01018-22707), cartridge 5065-4499
For 1100/1050/1200 pumps active inlet valve (P/N 5062-8562), outlet ball valve (P/N G1312-60067) and 2 pistons
(P/N 5063-6586)
Accessory Kits
1260 Infinity LC binary pump accessory kit Includes 1 tubing assembly (P/N 5063-6527), 1 CAN cable (P/N 5181-1519), 1 RRLC G1312-68755
system configurator, 1 stainless steel capillary, 400 x 0.17 mm (P/N G1312-87303),
1 stainless steel capillary, 700 x 0.17 mm (P/N G1312-87304)
1100/1200 pump accessory kit Includes 3 wrenches, 5 PTFE frits, tubing, capillary and wrist strap G1311-68705
Pump configuration kit for G1312B with Includes side cover with fixed rail, top and right cover for pump housing, and 6 connecting G1312-68726
G1158B 2 position/6 port valve capillaries. Allows automatic switching between different delay volumes to optimize the
system for 2.1 mm id or 4.6 mm id columns
Capillary pump accessory kit Includes purge valve and holder, hex keys 2.5 and 3 mm, 2 wrenches 1/2 in x 1/16 in, G1376-68705
wrenches 1/4 in x 5/16 in and 14 mm, wrist strap, torque adaptor and stainless steel frit,
0.5 µm
Accessory kit prep pump/gradient G1361A Includes stainless steel connecting capillaries, solvent mixer, 2 L solvent bottle, bottle head G1361-68707
assembly, filter, glass stop valve, stainless steel union, tubing and other parts
Online degasser accessory kit Includes 8 screws, 8 bushings, 4 markers, tubing, syringe and syringe adapter G1322-68705
Extended flow range kit, 100 µL/min Includes all parts to go from 20 µL/min to 100 µL/min flow rate in a capillary LC system G1376-68707
Manual prep injection valve kit, stainless steel Includes position sensing, 10 mL loop, 25 mL syringe, ring mounting bracket, start cable 5065-9922
and SS connecting capillaries, 0.5 mm id, 40 cm and 60 cm
Outlet ball valve, G1312-60067
60
Autosampler Supplies
Your Agilent autosampler is designed to deliver accurate measurements, precise injection volumes,
and high-quality data. And by following a regular schedule of preventive maintenance, you can ensure
a lifetime of defensible results.
Autosampler Maintenance schedule
Procedure When to Perform time required

Exchanging the needle assembly When needle shows indication of damage or blockage 15 minutes
Exchanging the seat assembly When the seat shows indication of damage or blockage 10 minutes
Exchanging the metering seal When autosampler reproducibility indicates seal wear 30 minutes
injection Valves
rotor seal
Valve use With Part No. rheBuild Kit Material rotor seal stator stator Face
2 position/6 port injection valve, 400 bar G1313A, 0101-0921 0101-1257 Vespel 0100-1853 0100-1850 0100-1851
G1329A, Tefzel 0100-1849
G1367A/B, 1120
PEEK 0100-2231
2 position/6 port micro injection valve, G1377A, G1389A 0101-1050 Vespel 0100-2088 0100-2089
400 bar
2 position/6 port injection valve, 600 bar G1329B, G1367C 0101-1422 PEEK 0101-1416 0101-1417
SL, G1367D SL
Plus, G1367E,
1220 Infinity LC
10 port, dual loop valve, 400 bar G2258A 0101-1385 Vespel 0101-2415 0101-1390
2 position/6 port MBB injection valve, G2260A 0101-1267 0101-1268 PEEK 0101-1268* 0100-2195
400 bar
2 position/6 port ultra high pressure G4226A 5067-4114 Vespel 5068-0007 5068-0006
valve, 1200 bar
*Includes seal and stator face
Injection Valve Assembly, 0101-0921 Stator for 2 position/6 port injection valve, Stator for 2 position/6 port ultra high pressure
600 bar, 0101-1417 valve, 1200 bar, 5068-0006
Needles and Needle seats

The needle should be replaced when it becomes bent, burred or blunt, or when it is leaking or plugged. You
should suspect a leak if you notice a trail of buffer crystals on the needle seat. The needle seat can become
blocked if the sample contains particulates, as this is the first restriction that the sample experiences. If this
occurs, try backflushing the needle seat capillary.

Agilent Autosampler Needle Assembly Description Part No. Compatible with Needle seat Part No.
G1313A, G1329A/B, Needle assembly, standard autosampler G1313-87201 Standard needle seat, PEEK G1329-87017
1120, 1220 Infinity LC 0.17 mm id capillary, 2.3 µL
(automated sampler only) Standard needle seat, PEEK G1329-87012
0.12 mm id capillary, 1.2 µL
G1313A, G1329A, Needle assembly, for use with PEEK seat G1313-87203 Standard needle seat, PEEK G1313-87102
(automated sampler only)
G1313A, G1329A/B, Needle assembly, 900 µL upgrade G1313-87202 Standard needle seat G1329-87017
(automated sampler only)
G1389A Needle assembly, micro LC autosampler G1329-80001 Micro LC Needle seat G1329-87101
100 µm id capillary, 1.2 µL
Micro LC Needle seat G1329-87103
50 µm id capillary, 0.3 µL
G1367A/B Needle assembly, well plate autosampler G1367-87200 Needle seat Vespel, well plate autosampler G1367-87101
(green) 0.17 mm id capillary, 2.3 µL
Needle assembly, well plate autosampler G1367-87201 Needle seat Vespel, well plate autosampler G1367-87102
(blue) 0.12 mm id capillary, 1.2 µL
(Continued)
Seat Assembly 0.17 mm id standard autosampler, G1329-87017 Seat Assembly 0.12 mm id standard autosampler, G1329-87012
62

Agilent Autosampler Needle Assembly Description Part No. Compatible with Needle seat Part No.
G1367C SL Needle assembly, well plate autosampler G1367-87202 Needle seat, 600 bar, with seat capillary G1367-87017
and G1367D SL Plus (black) 0.17 mm id x 100 mm, 0.8 mm od
Needle seat, PEEK 600 bar, G1367-87012
with seat capillary
0.12 mm id x 100 mm, 0.8 mm od
G1367E Needle assembly, G4226-87201 Needle seat, PEEK 600 bar, G1367-87012
1290/1260 Infinity LC autosampler with seat capillary
0.12 mm id x 100 mm, 0.8 mm od
G1377A Needle assembly, micro well plate sampler G1377-87201 Micro needle seat with seat capillary, 100 µm G1377-87000
Micro needle seat with seat capillary, 75 µm G1377-87001
Micro needle seat with seat capillary, 50 µm G1377-87002
G2258A Needle assembly, dual loop autosampler G2258-68710 Twin needle seat, dual loop autosampler G2258-87102
G2260A Needle assembly, prep autosampler G2260-87201 Needle seat, prep autosampler G2260-87101
0.5 mm id, 20 µL
G4226A Needle assembly, G4226-87201 Seat assembly, Vespel 0.12 mm, G4226-87012
1290/1260 Infinity LC autosampler 1290 Infinity LC autosampler
G4226A Needle assembly, G4226-87201 Low dispersion needle seat G4226-87020
1290/1260 Infinity LC autosampler
G5667A Bio-inert needle, 600 bar G5667-87200 Bio-inert needle seat assembly, 600 bar G5667-87017
Accessories
Description use With Part No.
Seat adapter G1313A, G1329A, G1389A, G2260A, G1313-43204
1120 and 1220 Infinity LC
Finger caps, for Autosampler Gripper, 15/pk G1313A, G1329A, G1389A, G2260A, 5063-6506
1120 and 1220 Infinity LC
Tool for micro seat capillary mounting G1377A G1377-44900
Needle seat, PEEK 600 bar, with seat capillary, Seat assembly for 1290/1260 Infinity LC, Needle Assembly for 1290/1260 Infinity LC,
G1367-87012 G4226-87012 G4226-87201
Metering Device supplies

Infrequently, the metering device seal and piston may need replacement if you see loss in injection volume precision or metering device leaking.
Metering Device supplies

Piston Description use With Part No. seal Description Part No.
Sapphire piston, 40 µL G1367D, G1389A, 5064-8293 Piston seal, 2 mm, for G1367D, G1389A, G1377A 5022-2175
G1377A, G4226A Piston seal for G4226A 0905-1717
Sapphire plunger, 100 µL G1313A, G1329A/B, 5063-6586 Piston seal graphite filled PTFE (reversed-phase), 2/pk 5063-6589
G1367A/B/C, G1367E
Sapphire plunger, 100 µL G5667A 5067-4695 Bio-inert piston seal G5611-21503
Sapphire piston, 900 µL G1313A, G1329A/B, 5062-8587 Metering valve seal 0905-1294
G1367E
Piston, 5 mL G2258A G2258-60003 Piston seal 0905-1599
loop Capillaries
Description Agilent Autosampler Part No.
Stainless steel loop capillary, 100 µL G5667A G5667-60320
G1313A 01078-87302
G1329A/B
1120
1220 Infinity LC
G1367A/B/C G1367-87300
Piston seals, 5063-6589
G4226A 5067-4710
G1367E
Stainless steel loop capillary, 900 µL G1329A/B G1313-87303
G2260A
Loop capillary, 40 µL G1367D G1377-87310
G4226A 5067-4703
G1367E
Sample loop, 01078-87302 G1377A G1377-87300
G1389A G1329-87302
Loop capillary, 20 µL G4226A G4226-60310
G1367E
Loop capillary, 8 µL G1389A G1375-87303
G1377A G1375-87315
Loop capillary, 20 µL, G4226-60310
Loop capillary, 5 mL G2260A G2260-68711
64
Autosampler trays
Autosampler trays
Description Part No.
For g1313A, g1329A/B, 1120, 1220 infinity lC samplers
100 position tray for 2 mL vials G1313-44510
Vial plate, G2255-68700
100 position tray for 2 mL vials, thermostattable G1329-60011
External vial tray for 17 vials (disposal position) G1313-60004
Disposal tube for external vial tray G1313-27302
For g1367A/B/C/D/e, g2258A, g4226A
Well plate tray, 2 well plates, 10 vials (supports 50 mm plates) G2258-60011
Vial plate for 54 x 2 mL vials, 6/pk G2255-68700
Vial plate for 15 x 6 mL vials 5022-6539 Vial plate, 5022-6539
For g1367A/B/C/D/e
100 position tray for micro vials G4226-60021
Also for G4226A
Plate for 27 Eppendorf Safe-lock tubes, 0.5/1.5/2 mL 5022-6538
For g2257A
8.5 in well plate rack, 2/pk G2255-68709
For 16 shallow well plates, 4 deep well plates (max 48 mm height) or 6 vial racks
10 in well plate rack, 2/pk G2255-68710
For 20 shallow well plates (max height 16 mm), not compatible with deep well plates
Plate for 27 Eppendorf Safe-lock tubes, 5022-6538
8.5 in well plate rack extension G2255-68720
Includes 3 racks for 3 x 16 shallow well plates, 2 x 4 deep well plates (max 48 mm height)
or 3 x 6 vial racks
10 in well plate rack extension G2255-68730
Includes 3 racks for 3 x 20 shallow well plates (max height 16 mm), not compatible with
deep well plates
For g2250A
205H rack, two 96-deep well plates G2250-04504
200 rack, 13 x 100 mm tubes (9 mL), 96 G2250-04503
94A special holding 1100 tray G2250-04500
Autosampler Kits
Autosampler Kits
For G1329B autosamplers Includes 1 PEEK rotor seal, 1 needle seat, 1 needle G1313-68719
For G1313A, G1329A autosamplers Includes 1 Vespel rotor seal, 1 needle seat, 1 needle, 2 metering seals and 15 finger caps G1313-68709
For G1313A, G1329A samplers Includes 1 Vespel rotor seal, 1 needle seat, 1 needle G1313-68730
For G1367A/B autosamplers Includes 1 Vespel rotor seal, 1 needle seat, 1 needle, 1 peristaltic pump cartridge, G1367-68730
1 seal tight nut
For G1367C/D autosamplers Includes 1 needle assembly, 1 low carry over seat, 1 peristaltic pump, 1 rotor seal G1367-68734
For G1367E autosampler Includes 1 PEEK rotor seal, 1 needle seat, 1 needle, 1 peristaltic pump cartridge, G1367-68741
1 metering seal
For 1220 manual injector systems Includes piston seals, PTFE frits, gold seals and rotor seal G4280-68750
For 1220 automated injector systems Includes piston seals, PTFE frits, gold seals, rotor seal, needle and needle seat G4280-68770
For 1120 manual injector systems Includes 1 piston seal, 5 PTFE frits, 2 gold seals, 4 outlet caps and 1 PEEK rotor seal G4280-68710
For 1120 automated injector systems Includes 1 piston seal, 5 PTFE frits, 2 gold seals, 4 outlet caps, 1 Vespel rotor seal, G4280-68730
1 needle and 1 needle seat
For G4226A HiP autosampler Includes 1 needle seat, 1 needle, 1 rotor 2 position/6 ports, 1 peristaltic pump, G4226-68735
1 metering seal
Extended PM kit Includes 1 Vespel rotor seal, 1 needle seat, 1 needle, 1 metering seal, 1 stator face 5065-4498
For G1313A, G1329A autosamplers
(Continued)
Maintenance kit, G1313-68709 PM kit for 1220 manual injector

systems, G4280-68750
66
Autosampler Kits
Door replacement Kits
Cabinet upgrade kit Includes side panel, top cover and front door G1329-68736
for 1260 Infinity LC sampler
Cabinet kit for G1367E and G4226A Includes side panel, base plate and top cover 5067-4662
Door replacement kit Includes front and side doors G1329-68737
for 1260 Infinity LC sampler
Door repair kit for G1367E and G4226A Includes front door G4226-67001
Light protection kit for G1329A Includes opaque front and side doors and front cover G1329-68718
Door replacement kit for G1329A Includes transparent front and side doors G1329-68727
upgrade Kits
Multidraw upgrade kit for Includes 500 µL capillary, 1500 µL capillary and ZDV union G1313-68711
G1313A/G1327A/G1329A autosamplers
Large volume injection kit for the 80 µL seat capillary G4216-68711
Agilent 1290 Infinity autosampler G4226A
Cabinet upgrade kit, G1329-68736 Door replacement kit, G1329-68737
Fraction Collector Supplies

Agilent fraction collectors are designed to process data in real-time for instantaneous and precise fraction
collection, while increasing throughput on your purification system. So you can be certain that you are
getting the highest degree of recovery and purity for your fractions – even with low flow rates.
Fraction Collector Maintenance schedule
Procedure When to Perform
Analytical and Preparative Fraction Collector Maintenance

Replace the inlet/waste tubing Once per year – or when you notice signs of damage or wear
Replace the valve-to-needle tubing Once per year – or when you notice signs of damage or wear
Exchange the preparative needle assembly When the needle shows signs of damage or blockage
Exchange the analytical needle assembly When the needle shows signs of damage or blockage, or when
using the short needle assembly with tall test tubes (>45 mm)
Exchange the diverter valve When the valve is leaking or not switching properly
Exchange the internal tray When the flow delay sensor no longer works
Repair or exchange a funnel within the internal tray or funnel tray When defective, leaky, blocked or contaminated
Micro Fraction Collector/spotter Maintenance

Replace fraction collector capillary At least every six months or when worn, blocked or damaged
Exchange the capillary guiding assembly When bent or damaged
Exchange the internal tray When the flow delay sensor no longer works properly
Exchange the flap septum and waste tubing At least every six months or when defective or contaminated
Micro fraction collector
68
Collecting tubes and trays

tray No. of tube
Part No. hole Diameter (mm) tubes tube Dimensions Part No. unit
G1364-84523 30 40 30 x 100 mm 5042-6458 100/pk
30 x 48 mm 5042-6470 100/pk
G1364-84524 25 60 25 x 100 mm 5042-6459 100/pk
G1364-84525 16 126 16 x 100 mm 5022-6532 250/pk
16 x 48 mm 5022-6533 100/pk Funnel tray for G1364C fraction collector,
G1364-84532
G1364-84516 12 215 12 x 100 mm 5022-6531 250/pk
12 x 48 mm 5022-6534 100/pk
G1364-84532 Funnel tray 40 Any size
Well Plate trays

tray Well Plate
Part No. Description Part No. Description unit
G1364-84521 Tray for 4 well plates, 5042-1385 96-well plates, 0.5 mL, polypropylene 120/pk
cooled 5042-1386 96-well plates, 0.5 mL, polypropylene 10/pk
Collection plate, showing 96-position
G1364-84531 Tray for 4 well plates, 5042-6454 96-deep well plates, 1 mL, polypropylene 50/pk closing mat, 5042-1389
adjustable, cooled 5042-1389 Closing mats for 96-well plates, silicone, 50/pk
pre-slit, fits 96-well plates P/N 5042-1385
and 5042-1386 only
G1364-84522 Tray for 2 well plates, 5042-1388 384-well plates, 90 µL, polypropylene 30/pk
10 funnels, cooled 5065-4402 96-deep well collection plates with glass
inserts, caps, and septa, pre-assembled,
0.35 mL
G1367-60001 Tray for 2 well plates, 5188-5321 Glass inserts, 350 µL 1000/pk
10 vials, 2 mL 5188-5322 Caps/septa for glass inserts 1000/pk
5042-8502 96-well plates, 150 µL, conical, 25/pk Vial plate, G2255-68700
polypropylene
G2255-68700 Vial plate for 54 x 2 mL vials 6/pk
5022-6538 Plate for 27 Eppendorf Safe-lock tubes,
0.5/1.5/2 mL
5022-6539 Vial plate for 15 x 6 mL vials
Plate for 27 Eppendorf Safe-lock tubes, 5022-6538
Vial plate, 5022-6539
Fraction Collector Capillary Kits and Needles

Module Max Flow rate tube size tubing Kit Needle length Needle typical use
G1364B 100 mL/min 0.8 mm id G1364-68711 G1364-87201 Tubes (max 100 mm)
G1364C 1 mL/min 0.15 mm id G1364-68723 50 mm G1367-87200 Tubes (max 48 mm), well plates, vials
10 mL/min 0.25 mm id G1364-68712 50 mm G1367-87200
10 mL/min 0.25 mm id G1364-68712 20 mm G1364-87202 Funnel tray (tubes max 75 mm)
100 mL/min 0.8 mm id G1364-68711 20 mm G1364-87202
G1364D 4 µL/min 25 µm id G1364-87304 MALDI targets, well plates
4-30 µL/min 50 µm id G1364-87305
30-100 µL/min 100 µm id G1364-87306
tiPs & tools
Information on maintenance procedures can be found at www.agilent.com/chem/lCmaintenancenotes
70
g1364D Micro Fraction Collector supplies

MALDI spotting adapter for G1364D G1364-83205
Well plate adapter assembly for G1364C/D G1364-60021
Flap septum, PEEK, for internal tray G1364-27107
MALDI spotting adapter, G1364-83205
Fused silica/PEEK capillary, 25 µm, 50 cm G1364-87304
Waste tube, PTFE, 20 cm, 1.4 mm id, 2.0 mm od G1364-86711
MALDI plate carrier Bruker 5022-6541
MALDI plate carrier Bruker PAC 5022-6546
Well plate adapter assembly, G1364-60021
MALDI plate carrier ABI 5022-6542
MALDI plate carrier ABI Opti-TOF 5023-0238
MALDI plate carrier Agilent 5022-6543
MALDI plate carrier Micromass 5022-6544
Target plate for AP-MALDI LC/MS G1972-60025
Calibration plate Bruker 5023-0208
Calibration plate ABI 192 5023-0209
Calibration plate ABI 10x10 & 20x20 5023-0213
MALDI plate carrier Bruker, 5022-6541
Calibration plate Agilent 5023-0214
Calibration plate Micromass 5023-0215
On-line matrix kit for MALDI spotting G1364-68706
Includes BCD board/cable, syringe, needles, adapters, connector and capillary
Adapter, female to female 1/4-28 5042-8517
Adapter, male Luer to female 1/4-28 5042-8518
Syringe, glass, 1 mL, 1/4-28 connector 5181-1541
Micro T-connector, PEEK, swept volume 29 nL, with 1/32 in id fittings 5042-8519 Calibration plate Bruker, 5023-0208
MALDI spotting tips, PTFE, 10/pk G1364-81701
Union, female to female, 5042-8517
Adapter, male Luer to female, 5042-8518
Micro T-connector, PEEK, 5042-8519
Valve Supplies
Agilent's industry-leading Manual Injection Valves are designed to ensure trouble-free operation with your
HPLC System.
Our valves also feature patented "Make-Before-Break" architecture that allows you to switch between
Injection Valve Assembly, 0101-0921 LOAD and INJECT positions without interrupting the flow. So you can analyze more samples in less time.
Valve Maintenance Notes

• Vespel is a polyimide with low wear and high chemical resistance. Vespel tolerates a pH range of
0 to 10. More basic solutions dissolve Vespel, which damages the rotor seal
• PEEK offers a high chemical resistance and versatility, and will tolerate the entire pH range
from 0 to 14
• Tefzel is recommended for use in applications where PEEK cannot be used, such as methylene chloride
or DMSO in higher concentrations
ph range 0-7 7-10 10-14
Vespel
PEEK
Tefzel
72
injection Valves
injection Valves
rotor seal
Valve use With Part No. rheBuild Kit Material rotor seal stator stator Face
2 position/6 port injection valve, 400 bar G1313A, 0101-0921 0101-1257 Vespel 0100-1853 0100-1850 0100-1851
G1329A, Tefzel 0100-1849
G1367A/B, 1120
PEEK 0100-2231
2 position/6 port micro injection valve, G1377A, G1389A 0101-1050 Vespel 0100-2088 0100-2089
400 bar
2 position/6 port injection valve, 600 bar G1329B, G1367C 0101-1422 PEEK 0101-1416 0101-1417
SL, G1367D SL
Plus, G1367E,
1220 Infinity LC
10 port, dual loop valve, 400 bar G2258A 0101-1385 Vespel 0101-2415 0101-1390
2 position/6 port MBB injection valve, G2260A 0101-1267 0101-1268 PEEK 0101-1268* 0100-2195
400 bar
2 position/6 port ultra high pressure G4226A 5067-4114 Vespel 5068-0007 5068-0006
valve, 1200 bar
*Includes seal and stator face
Stator for 2 position/6 port ultra high pressure

valve, 1200 bar, 5068-0006
switching Valve supplies

A set of valve types specially designed for Agilent HPLC systems allows you to extend your
HPLC applications. New valve offerings give you:
• More flexibility in solvent selection and column selection

Switching valve
• New automation capabilities in sample preparation
• Increased sample throughput through alternating column regeneration
• Increased separation performance with multidimensional chromatography
external switching Valve replacement Parts

rotor seal
Description use With Valve head Material rotor seal stator Face stator head repair Kit Bearing ring
2 position/6 port valve head, G4231A 5067-4131 PEEK 0101-1409 N/A 0101-1417 N/A 1535-4045
600 bar
2 position/6 port valve head, G4231B 5067-4117 Vespel 5068-0008 N/A 5068-0006
1200 bar
2 position/10 port micro valve G4232A 5067-4144 PEEK 0101-1415 N/A 0101-1421
head, 600 bar
2 position/10 port valve head, G4232B 5067-4118 Vespel 5068-0012 N/A 5068-0011
1200 bar
6-Column selector valve head, G4234A 5067-4146 PEEK 5068-0076 N/A 5068-0077
600 bar
6-Column selector valve head, G4234B 5067-4142 Vespel 5068-0067 N/A 5068-0077
1200 bar
Bio-inert 12 position/13 port G4235A 5067-4159 PEEK Repair Kit Repair Kit 5068-0097 0101-1288
valve POD, 210 bar
Bio-inert 2 position/6 port, G5631A 5067-4148 PEEK 0101-1409 0100-1851 5068-0060 N/A
600 bar
2 position/10 port valve head G5632A 5067-4132 PEEK 5068-0041 5068-0095 5068-0040
Bio-inert, 600 bar
Bio-inert 4-Column selector, G5639A 5067-4134 PEEK 5068-0045 5068-0093 5068-0044
600 bar
74
internal switching Valves replacement Parts

rotor
seal Bearing
Description use With Part No. Material rotor seal stator Face stator head ring repair Kit
2 position/6 port, 400 bar G1316A/B G1316-67005 Tefzel 0100-1854 0100-1851 0100-1850 0100-1852 0101-1258
Vespel 0100-1855
PEEK 0100-2233
2 position/10 port CSV, 400 bar G1316A G1316-67007 PEEK Repair Kit Repair Kit 0101-1362 0100-1852 0101-1360
2 position/6 port HP CSV, 600 bar G1316A 1260 G1353-68750 PEEK 0101-1409 N/A 0101-1417 1535-4045 N/A
Series/G1316B
2 position/6 port micro CSV, 400 bar G1316A G1316-67006 Vespel 0100-2087 N/A 0100-2089
2 position/10 port CSV, 600 bar G1316B G1316-67009 PEEK 0101-1415 N/A 0101-1421
2 position/6 port valve head, 600 bar G1316C 5067-4137 PEEK 0101-1409 N/A 0101-1417
2 position/6 port valve head, 1200 bar G1316C 5067-4117 Vespel 5068-0008 N/A 5068-0006
2 position/10 port micro valve head, G1316C 5067-4144 PEEK 0101-1415 N/A 0101-1421
600 bar
6-Column selector valve head, 600 bar G1316C 5067-4146 PEEK 5068-0076 N/A 5068-0077
6-Column selector valve head, 1200 bar G1316C 5067-4142 Vespel 5068-0067 N/A 5068-0077
8 position/9 port valve head, 400 bar G1316C 5067-4108 PEEK 5067-4113 5067-4113 5067-4112
8 position/9 port valve head, 600 bar G1316C 5067-4107 PEEK 5067-4111 N/A 5068-0001
2D-LC, valve head, 1200 bar G1316C 5067-4170 Vespel 5068-0116 N/A 5068-0115
Bio-inert 12 position/13 port valve POD, G1316C 5067-4159 PEEK 0101-1288 0101-1288 5068-0097
210 bar
Bio-inert 2 position/6 port, 600 bar G1316C 5067-4148 PEEK 0101-1409 0100-1851 5068-0060
Bio-inert 4-Column selector, 600 bar G1316C 5067-4134 PEEK 5068-0045 5068-0093 5068-0044
2 position/10 port valve head Bio-inert, G1316C 5067-4132 PEEK 5068-0041 5068-0095 5068-0040
600 bar
Valve head, 2 position/6 port, 600 bar, 5067-4137 2 position/6 port ultra high pressure valve, Valve head, 2 position/10 ports for ultra high
5067-4117 pressure, 1200 bar, 5067-4118
Stator for 2 position/6 port ultra high pressure Rotar seal, 2 position/6 port, 600 bar for C1316B,
valve, 600 bar, 0101-1417 0101-1409
Manual injection Valves

Agilent provides the latest developments in LC injection technology from Rheodyne.
• Continuous flow path with "Make-Before-Break" design

• Sample capacity
• Choice of stainless or PEEK flow path
• Easy access to fittings due to wide 30° port angles
Series 7725i and 9725i Analytical Injection Valves

Stainless steel (SS) 7725i and PEEK 9725i valves are the most popular injection valves for analytical HPLC.
Features include:
• A 20 µL loop (installed). Loops are also available in stainless steel or PEEK from 5 µL to 5 mL
(10 mL for PEEK)
• Make-Before-Break (MBB) technology allows switching without flow interruption
• Wide 30° port angles offer easier access to fittings
• Built-in position sensing switch provides the chromatograph with a reproducible start signal
Series 3725i-038 and 3725i Preparative Injection Valves

The series 3725i-038 (stainless steel) and 3725i (PEEK) are the most suitable manual valves for
large sample volumes, high flow rates, and preparative columns sized 1.0-10 cm in diameter.
• Versatile ports accommodate 1/8 in (3.2 mm) and 1/16 in (1.6 mm) od tubing.
7725i manual injection valve, 5063-6502
Note: 1/16 in od tubing requires an adapter, P/N 5067-1503
• 1.0 mm diameter passages allow flow rates up to 800 mL/min with virtually no pressure drop
• Make-Before-Break technology allows switching without flow interruption
• High reproducibility for both partial-filling and complete-filling methods
• Sample range is 100 µL to 20 mL (10 mL loop is installed)
• Flow range is 10 to 800 mL/min
• Built-in position sensing switch gives the chromatograph a reproducible start signal
76
Manual injection Valves with Position sensing switches

rotor Needle
seal rotor stator stator Bearing isolation repair Port
Description Comments Part No. Material seal Face head ring seal Kit Adaptor
2 position/ Analytical 5063-6502 Tefzel 0101-0620 0100-1859 0100-1860 1535-4045 1535-4046 0101-1254 N/A
6 port valve, Vespel 0101-0623
400 bar, for
G1328A/B PEEK 0101-1255
2 position/ Analytical 5067-4141 PEEK 5068-0052 N/A 5068-0053 1535-4045 1535-4046 N/A N/A
6 port valve,
600 bar, for
G1328C
2 position/ Analytical 5067-4104 PEEK 5067-4105 N/A 0100-1850 1535-5045 N/A N/A 5067-1581
6 port valve,
400 bar, for
1120
2 position/ Analytical 5067-4202 PEEK 0101-1409 N/A 0101-1417 1535-4045 N/A N/A 5067-1581
6 port, 600
bar, for 1220
2 position/ Bio 5067-4158 PEEK 5068-0082 0100-1851 5068-0060 1535-4045 N/A N/A 5067-1581
6 port valve,
600 bar, for
Bio-inert
2 position/ Analytical 0101-1253 Tefzel 0101-0620 0100-1859 1535-5082 N/A 1535-4046 N/A N/A
6 port valve,
400 bar PEEK
Manual prep Preparative 0101-1232 PEEK 0101-1233 N/A N/A N/A 1535-4046 N/A N/A
injection valve,
SSt 400 bar,
for 3725i
Manual prep Preparative 0101-1231 PEEK 0101-1233 N/A N/A N/A 1535-4046 N/A N/A
injection valve,
PEEK
Manual Injection Valve Replacement Parts

• Rotor seals wear with use and need routine replacement
• Stators only need replacement if the ports are damaged
• PEEK rotor seals are incompatible with concentrated nitric and sulfuric acids
Manual injection Valve sample loops

The right mix of injection valve sample loops are available for your application needs.
Agilent offers factory-cut and finished loops of the highest quality.
• Stainless steel loops are square cut and free of burrs for a flush connection
• Flexible PEEK loops have a clean, straight cut for low dead volume connections
Stainless steel sample loops Stainless Steel Sample Loops

• Sample loops for Rheodyne 7725 Series and 7125 Series valves are not interchangeable
due to the change in port angle
• Actual volumes can differ due to tolerance of metal tubing bore
• Accuracy of large metal loops is ±5%, intermediate loops ±10%, small loops ±30%
PEEK Sample Loops

• Inert to most organic solvents
• Wall thickness, temperature, exposure time and concentration of organic solvents affect the
durability of PEEK tubing
• Concentrated nitric acid and sulfuric acid weaken PEEK tubing
• THF, methylene chloride and DMSO cause PEEK to swell
• Actual volumes can differ because of tolerance of tubing bore
• Accuracy of large PEEK loops is ±14%, intermediate loops ±21%, small loops ±65%
78
Manual injection Valve sample loops

Volume iD (mm) Material use With Part No.
5 µL 0.18 SS 7125 and 7010 1535-4860
0.18 SS 7725 0101-1248
0.18 PEEK 9725 0101-1241
10 µL 0.30 SS 7125 and 7010 0101-0376
0.30 SS 7725 0100-1923
0.25 PEEK 9725 0101-1240
20 µL 0.51 SS 7125 and 7010 0101-0377
0.30 SS 7725 0100-1922
0.25 PEEK 9725 0101-1239
PEEK sample loops
50 µL 0.51 SS 7125 and 7010 0101-0378
0.51 SS 7725 0100-1924
0.51 PEEK 9725 0101-1238
100 µL 0.51 SS 7125 and 7010 0101-0379
0.51 SS 7725 0100-1921
0.51 PEEK 9725 0101-1242
200 µL 0.76 SS 7125 and 7010 0101-1252
0.76 SS 7725 0101-1247
0.51 PEEK 9725 0101-1237
500 µL 0.76 SS 7125 and 7010 0101-1251
0.76 SS 7725 0101-1246
0.76 PEEK 9725 0101-1236
1 mL 0.76 SS 7125 and 7010 0101-1219
0.76 SS 7725 0101-1245
0.76 PEEK 9725 0101-1235
2 mL 1.00 SS 7125 and 7010 0101-1250
1.00 SS 7725 0101-1244
0.76 PEEK 9725 0101-1234
1.6 PEEK 3725 0101-1229
5 mL 1.00 SS 7125 and 7010 0101-1249
1.00 SS 7725 0101-1243
0.76 PEEK 9725 0101-1230
1.6 PEEK 3725 0101-1228
10 mL 2.0 PEEK 3725 0101-1227
20 mL 2.0 PEEK 3725 0101-1226
syringes for Manual injection

Agilent syringes for manual injection valves have a blunt-tip point style needle to prevent damaging the
valve's internal parts. They can be used with any type/brand of manual injection valve.
lC Manual syringes with Fitted Plungers

Volume (µl) Description unit Needle Part No.
5 Fixed 22 gauge/2 in/LC tip 5190-1480
Removable 22 gauge/2 in/LC tip 5190-1485
Replacement needle for 10 µL syringe 3/pk 5190-1486
Syringe, 100 µL FN LC tip, 5190-1508
80
lC Manual syringes with PtFe-tipped Plungers

Volume (µl) Description unit Needle Part No.
10 Removable 22 gauge/2 in/LC tip 5190-1492
Replacement needle for 10 µL syringe 3/pk 5190-1486
Replacement plunger with PTFE tip 5190-1558
for 10 µL syringe
Replacement needle 3/pk 5190-1571
for 25 µL syringe
for 50 µL syringe
for 100 µL syringe
for 500 µL syringe
tiPs & tools

Agilent has made vial, cap and septum selection easy with its new Interactive Vial Selection Tool, available online in both desktop and
mobile versions. The tool identifies the right vial and closures for your particular application, and provides the rationale for the choices offered.
Visit www.agilent.com/chem/selectVials
Thermostatted Column
Compartment Supplies
thermostatted Column Compartment supplies
High temperature heat exchanger, G1316-80002 Description Part No.
Capillary system for 0.12 mm id use G1316-68744
Rapid Resolution High Throughput capillary kit 5065-9947
Used for converting an Agilent 1200 instrument to the RRLC configuration, to enable use
of high efficiency columns (to 600 bar). Can also be used for Agilent 1100 instruments.
1200 capillary kit for 0.12 mm id G1316-68716
High temperature heat exchanger, 1.6 µL, 0.12 mm id, "R" G1316-80002
High temperature heat exchanger, 1.6 µL, 0.12 mm id, "L" G1316-80003
Heat exchanger/cooler, 1.5 µL, 0.12 mm id G1316-80004
High temperature heat exchanger, G1316-80003 Carrier for heat exchanger 1290 Infinity TCC and 1200 Series TCC SL G1316-83200
Column Identification Module (CIM), 3/pk 5062-8588
Column clamp, 6/pk 5063-6526
Column holder for micro LC columns 5001-3702
Column connecting capillary with fittings, 7 cm, 0.12 mm id, 1/16 in male/male G1316-87303
PEEK tubing, 1/32 in od, 0.4 mm id, 450 mm, Micro valve to waste 5022-6503
Heat exchanger/cooler, G1316-80004
Thermal column insulation enclosure kit G1316-60001
Column Identification Module, 5062-8588
82
Capillary tubing Kits

Capillary kits are available for easy ordering and setup of the switching valves. They include all
capillaries and fittings for specific applications, as well as bulk PEEK capillaries and a capillary cutter
to add maximum flexibility.
Capillary tubing Kits

Application Valve Kit Part No.
Column regeneration G1157A G1156-68711
Capillaries: 0.17 mm id
Column regeneration G1157A G1156-68713
Capillary kit column regeneration intern 2 position/10 port 400 bar valve, for G1316A/B G1316-68711
Column selection G1159A G1156-68712
Sample enrichment G1316A #055 G1316-68710
Sample enrichment G1158A G1156-68714
Solvent selection G1160A G1160-68706
Flow rate up to 10 mL/min 5067-4601*
*Use for method development applications. Kit contains longer tubing.
Capillary Kits for internal switching Valves

Capillary kit column switching valve 2 position/6 port 400 bar valve, for G1316A/B G1316-68708
Capillary kit column regeneration intern 2 position/10 port 400 bar valve, G1316-68711
for G1316A/B
Column regeneration kit for µ-LC columns 2 position/10 port CSV 600 bar, for G1316B G1316-68721
Capillary Kits for Column selection Valve

Capillary Kits Part Numbers Valve Kit
0.12 mm iD-A 0.17 mm iD other Part No. Valve type Pressure
5067-4646 5067-4730 G4231A 2 position/6 port 600
5067-4646 G4231B 2 position/6 port 1200
5067-4800 5067-5103 G4232A 2 position/10 port 600
5067-4682 G4232B 2 position/10 port 1200
5067-4729 G4234A 6 position/14 port 600
5067-4729 G4234B 6 position/14 port 1200
5067-4601 G4235A 12 position/13 port Bio-inert 210
5067-1595 8 position/9 port 1200
5067-1596 8 position/9 port 1200
5067-1597 8 position/9 port 1200
Capillary Kit Contents

Part No. Description Quantity
5067-1595 Heater long-up 0.12 id, 1.6 µL internal 4
Heater long-down 0.12 id, 1.6 µL internal 4
Carrier for heat exchanger, TCC SL Plus 4
Flexible tubing, 280 mm, 0.12 mm id 2
SS capillary, 340 x 0.12 mm, m/m, n-s/n-s 1
SS capillary, 280 x 0.12 mm, ps/ps, 1 long nut, 1 short nut 8
SS capillary, 280 x 0.12 mm, ps-ns, 2 long nuts, 1 short nut 8
SS capillary, 280 x 0.17 mm, ps/ps, 1 long nut 1
Flexible capillary, 0.12 x 500 mm, no fittings 1
Fitting holder assembly 4
Column clip set, eight colors 2
Long fittings and ferrules, SS, 10/pk 1
(Continued)
tiPs & tools
For internal switching valves for

your TCC, see page 75
84

5067-1596 Capillary, 0.17 x 90 mm, 1/16 in male/male 6
Flexible capillary, 0.17 x 280 mm, no fitting 2
Plastic fitting 8
Flexible capillary, 0.17 mm id x 600 mm 1
VHP-fitting standard length (10 each = 1/pk) 6
5067-1597 Heater long-up 0.12 id, 1.6 µL internal 3
SS capillary, 340 x 0.12 mm, m/m, n-s/n-s 1
Flexible capillary, 0.12 x 500 mm, no fittings 1
5067-4601 Bottle head assembly 4
Tefzel ferrules/SS rings, 1/8 in, 10/pk 1
Flexible tubing, 1 ea / 1 meter 5
PPS nuts, 1/8 in, 1/4-28 thread, 10/pk 1
(Continued)

5067-4646 SS capillary, 0.12 mm id, 340 mm pre-swaged 1
SS capillary, 0.17 mm id, 700 mm pre-swaged 1
PTFE flexible tubing 1
Heat exchanger, long-up, 1.6 µL 1
Heat exchanger, long-down, 1.6 µL 1
5067-4682 SS capillary, 120 x 0.12 mm, ns ns, 1 large, 1 large 1
SS capillary, 150 x 0.12 mm, ns ns, 1 large, 1 large 2
SS capillary, 200 x 0.12 mm, ns ps, 1 short, 1 large 1
SS capillary, 280 x 0.12 mm, ns ns, 1 large, 1 large 2
SS capillary, 340 x 0.12 mm, ps ns, 1 short, 1 large 1
SS capillary, 90 x 0.12 mm, ns ns, 1 short, 1 large 2
Heater long-up 0.12 id, 1.6 µL internal 1
(Continued)
86

5067-4729 SS capillary, 0.8 x 0.11 mm, 340 mm, RF/M4 1
SS capillary, 0.8 x 0.11 mm, 5000 mm, RF/M4 1
SS capillary, 0.8 x 0.11 mm, 130 mm, Ig RF/M4 8
SS capillary, 0.8 x 0.17 mm, 150 mm, Ig M4/M4 1
SS capillary, 0.8 x 0.11 mm, 250 mm, Ig ps/M4 1
Flexible PEEK tubing 2
5067-4730 SS capillary, 340 x 0.17 mm, ps-ns, 1 short, 1 long 1
SS capillary, 90 x 0.17 mm, ns-ns, 1 short, 1 long 4
SS capillary, 150 x 0.17 mm, ns-ns, 1 large, 1 large 2
SS capillary, 200 x 0.17 mm, ns-ps, 1 short, 1 large 1
PTFE flexible tubing 1
5067-4800 SS capillary, 340 x 0.11 mm, SW-1/16/M4 1
SS capillary, 0.17 mm id, 700 mm, SW-1/16/M4 1
SS capillary, 90 x 0.11 mm, SW-1/16/M4 2
SS capillary, 0.8 x 0.11 mm, 150 mm, large RF/M4 2
SS capillary, 0.8 x 0.11 mm, 280 mm, large RF/M4 1
SS capillary, 0.8 x 0.17 mm, 150 mm, large M4/M4 1
SS capillary, 0.8 x 0.12 mm, 250 mm, large ps/M4 1
PEEK tubing, 1/32 in od, 0.4 mm id, 450 mm 2
(Continued)

5067-4767 Capillary, 400 x 0.17 mm Bio 1
Capillary, 300 x 0.17 mm Bio 2
Finger-tight fittings, long, 1/16 in, 10/pk 1
5067-4769 Capillary, 400 x 0.17 mm Bio 1
Capillary, 300 x 0.17 mm Bio 4
Finger-tight fittings, long, 1/16 in, 10/pk 1
5067-5103 SS capillary, 340 x 0.17 mm, ps-ns SW-M4 1
SS capillary, 0.17 mm id, 700 mm, SW-1/16/M4 1
SS capillary, 90 x 0.17 mm, SW-1/16/M4 2
SS capillary, 90 x 0.17 mm, RF/M4 2
SS capillary, 0.8 x 0.17 mm, 150 mm, large M4/M4 1
SS capillary, 0.8 x 0.12 mm, 250 mm, large ps/M4 1
PEEK tubing, 1/32 in od, 0.4 mm id, 450 mm 1
88
Detector Supplies
Agilent wavelength detectors combine exceptional flexibility with superior instrument control, data
communication, and analytical capabilities. This section shows you how to maintain your detector’s high
level of selectivity and sensitivity.
Detector Maintenance tips
symptom What to Do Additional information

Lamp does not ignite Exchange the lamp Perform a wavelength calibration test and an intensity test after lamp
replacement
Noise exceeds application limit Exchange the flow cell Perform a wavelength calibration test after flow cell replacement
Drift exceeds application limit Exchange the lamp Perform a wavelength calibration test and a pressure tightness test after
flow cell replacement
Leaky flow cell Exchange the flow cell Perform a wavelength calibration test after flow cell replacement
(For G4212 only)
Leaky flow cell Clean or exchange the flow cell Perform a wavelength calibration test and a pressure tightness test after
(For all G1314/G1315/G1365 detectors) flow cell replacement
Lower intensity Exchange the flow cell Perform a wavelength calibration test after flow cell replacement
(For G4212 only)
Lower intensity Clean or exchange the flow cell Perform a wavelength calibration test and a pressure tightness test after
(For all G1314/G1315/G1365 detectors) flow cell replacement
Certified lamps
• All lamps are tested for noise and drift specifications, correct operating voltage, light intensity
and proper alignment
• Improved coating process increases Agilent lamp lifetimes up to 50%
Deuterium lamp, G1314-60100
• Agilent deuterium lamps are designed with a much narrower aperture providing increased light
intensity and decreased noise – translating into an appreciably higher signal-to-noise ratio
• By providing higher sensitivity, Agilent lamps can extend detection capabilities and improve
qualification at trace levels – for more than 2,000 hours of use
Agilent's lamps are manufactured in an ISO 9001 certified environment and are fully traceable throughout
every step of the production process. Each lamp is then tested to ensure it meets Agilent's performance
specifications. Test equipment is regularly calibrated using optical standards certified by NIST
Long life HiS Deuterium lamp, 5190-0917 (National Institute of Standards and Technology) or PTB (Physikalisch-Technische Bundesanstalt).
Detector lamps
Variable Wavelength Detector (VWD)
Long life Deuterium lamp with RFID tag For G1314D/E/F G1314-60101
Long life Deuterium lamp For G1314A/B/C, 1120 and 1220 Infinity G1314-60100
Deuterium longlife lamp, 2140-0813 LC
Diode Array Detector (DAD)/Multiple Wavelength Detector (MWD)
Long life HiS Deuterium lamp (8-pin) with For G4212A/B 5190-0917
RFID tag
Long life Deuterium lamp with RFID tag For G1315C/D and G1365C/D 2140-0820
Long life Deuterium lamp For G1315A/B and G1365A/B 2140-0813
Long life Deuterium lamp For G1315A/B and G1365A/B 5182-1530
Deuterium lamp For G1315A/B and G1365A/B 2140-0590*
Tungsten lamp For G1315A/B/C/D and G1365A/B/C/D G1103-60001
*Standard lamp for 1000 hours of use only
Long life Deuterium lamp, 5182-1530
Deuterium lamp, 2140-0590
Tungsten lamp assembly, G1103-60001
90
VWD Flow Cell selection
typical Column length (cm) typical Peak Width recommended Flow Cell
<=5 0.025 Micro Flow Cell High Pressure
10 0.05 0.05-0.2 mL/min Semi-micro Flow Cell Flow Cell For
Pressure
20 0.1 Standard Flow Cell
Above 100 bar
> = 40 0.2
Typical Flow Rate 0.05-0.2 mL/min 0.2-0.4 mL/min 0.4-0.8 mL/min 1-2 mL/min 0.05-5 mL/min
Internal Column Diameter 1.0 mm 2.1 mm 3.0 mm 4.6 mm
Flow Cell and repair Kits for VWD*

repair Kit
Description use With specifications Part No. Part No.
Standard flow cell, RFID G1314D/E/F 10 mm, 14 µL, 40 bar G1314-60186 G1314-65061
Standard "D" type flow cell G1314A/B/C 10 mm, 14 µL, 40 bar G1314-60086 G1314-65061
Semi-micro flow cell, RFID G1314D/E/F 6 mm, 5 µL, 40 bar G1314-60183 G1315-68713
Semi-micro flow cell G1314A/B/C 6 mm, 5 µL, 40 bar G1314-60083 G1315-68713
Micro flow cell, 3 mm, RFID G1314D/E/F 2 µL, 120 bar G1314-60187 G1315-68713
Micro flow cell, 3 mm G1314A/B/C 2 µL, 120 bar G1314-60087 G1315-68713
Micro flow cell, 5 mm G1314A/B/C 1 µL, 40 bar G1314-60081 G1314-65052
High pressure flow cell, RFID G1314D/E/F 10 mm, 14 µL, 400 bar G1314-60182 G1314-65054
High pressure flow cell G1314A/B/C 10 mm, 14 µL, 400 bar G1314-60082 G1315-68713
*For more information about what is included in each kit, see page 97.
Variable wavelength detector
Capillaries for VWD Flow Cell

Flow Cell Description Part No. inlet Capillary Part No. outlet Capillary Part No.
Standard flow cell, RFID G1314-60186 Inlet capillary, 0.17 mm 5062-8522 Waste capillary, PEEK, 0.25 mm id 5062-8535
Standard "D" type flow cell G1314-60086 id, 600 mm long 1/16 in finger-tight PEEK fitting, 2/pk 0100-1516
Semi-micro flow cell, RFID G1314-60183 Inlet capillary, 0.12 mm 5021-1823 Waste capillary, PEEK, 0.25 mm id 5062-8535
Semi-micro flow cell G1314-60083 id, 400 mm long 1/16 in finger-tight PEEK fitting, 2/pk 0100-1516
Micro flow cell, 3 mm, RFID G1314-60187 Inlet capillary, 0.12 mm G1314-87301 Outlet capillary, 0.17 mm id, 120 mm G1314-87302
Micro flow cell, 3 mm G1314-60087 id, 310 mm long long
Micro flow cell, 5 mm G1314-60081 Inlet capillary, 0.12 mm 5021-1823 Outlet capillary, 0.17 mm id, 120 mm G1314-87302
id, 400 mm long long
High pressure flow cell, RFID G1314-60182 Inlet capillary, 0.17 mm G1315-87311 Outlet capillary, 0.17 mm id, 120 mm G1314-87302
High pressure flow cell G1314-60082 id, 380 mm long long
92
Diode Array Detector (DAD)/Multiple Wavelength

Detector (MWD)
Cleaning or replacing DAD/MWD Flow Cells
• A decrease in detector performance or unusual noise levels may mean you have dirty Diode array detector (DAD)/
Multiple wavelength detector (MWD)
flow cell windows
• Clean and reassemble one side of the flow cell before beginning the other side to prevent mixing the
front and rear gaskets, which have different hole diameters
• While cleaning or replacing flow cell windows, if the washers fall out of the window assembly, they
must be inserted in the correct order with a PTFE ring to prevent any leaks from the flow cell window
• Clean the cell body with water or isopropanol
• After opening the cell you should always use a new gasket
DAD/MWD Flow Cell selection
typical Column length (cm) typical Peak Width recommended Flow Cell
<=5 0.025 80/500 nL Flow Cell High Pressure
10 0.05 Semimicro Flow Cell Flow Cell
20 0.1 Standard Flow Cell
> = 40 0.2
Typical Flow Rate 0.05-0.2 mL/min 0.2-0.4 mL/min 0.4-0.8 mL/min 1-2 mL/min 0.05-5 mL/min
Internal Column Diameter 0.3-1 mm 2.1 mm 3.0 mm 4.6 mm
Flow Cell and repair Kits for DAD/MWD*

repair Kit
Description use With specifications Part No. Part No.
Standard flow cell with RFID tag G1315C/D, G1365C/D 10 mm, 13 µL, 120 bar G1315-60022 G1315-68712
Standard flow cell G1315A/B, G1365A/B 10 mm, 13 µL, 120 bar G1315-60012
Semi-micro flow cell, RFID G1315C/D, G1365C/D 6 mm, 5 µL, 120 bar G1315-60025 G1315-68713
Semi-micro flow cell G1315A/B, G1365A/B 6 mm, 5 µL, 120 bar G1315-60011
Micro flow cell, RFID G1315C/D, G1365C/D 3 mm, 2 µL, 120 bar G1315-60024 G1315-68713
Micro high-pressure flow cell G1315A/B, G1365A/B 6 mm, 1.7 µL, 400 bar G1315-60015
500 nL flow cell 10 mm, 50 bar G1315-68724
80 nL flow cell 6 mm, 50 bar G1315-68716
Preparative flow cell G1315A/B, G1365A/B 3 mm, 120 bar, stainless steel G1315-60016 G1315-68712
Preparative flow cell 0.3 mm, 20 bar, quartz G1315-60017
Preparative flow cell 0.06 mm, 20 bar, quartz G1315-60018
Max-Light cartridge cell G4212A/B Infinity LC DAD 10 mm, 1.0 µL, 60 bar G4212-60008
Max-Light cartridge cell G4212A/B Infinity LC DAD 60 mm, 4.0 µL, 60 bar G4212-60007
Max-Light cartridge test cell Must be used to perform detector build- G4212-60011
in tests
Max-Light ultra low dispersion flow cell G4212A/B Infinity LC DAD 10 mm V(s) = 0.6 µL G4212-60038
Max-Light High Dynamic Range (HDR) G4212A/B Infinity LC DAD 3.7 mm, V(s) = 0.9 µL G4212-60032
flow cell
*For more information about what is included in this kit, see page 97.
Max-Light cartridge cell, G4212-60008 Ultra-low dispersion flow cell, G4212-60038
tiPs & tools
Learn more about how different flow cells

impact your chromatography, and the
High Dynamic Range (HDR) Flow Cell.
See application note 5991-0115EN at
www.agilent.com/chem/library
Max-Light cartridge cell, interior view, 60 mm path Max-Light HDR flow cell, interior view,
for high concentrations, G4212-60007 to show short 3.7 mm path length
for high concentrations, G4212-60032
94
Capillaries for DAD/MWD Flow Cell

Flow Cell Description Part No. inlet Capillary Part No. outlet Capillary Part No.
Standard flow cell G1315-60022 Inlet capillary with G1315-87321 Outlet capillary, 0.17 mm id, 200 mm long G1315-87302
with RFID tag heat exchanger,
0.17 mm id,
590 mm long
Standard flow cell G1315-60012
Semi-micro flow cell G1315-60025 DAD heat exchanger G1315-87319 Outlet capillary, 0.12 mm id, 200 mm long G1315-87306
with RFID tag capillary, 0.17 mm id, Outlet capillary, 0.17 mm id, 200 mm long G1315-87302
310 mm long
Semi-micro flow cell G1315-60011 Outlet capillary, 0.12 mm id, 200 mm long G1315-87306
Outlet capillary, 0.17 mm id, 200 mm long G1315-87302
Micro flow cell G1315-60024 DAD heat exchanger G1315-87339 Outlet capillary, 0.12 mm id, 200 mm long G1315-87306
with RFID tag capillary, 0.12 mm id, Outlet capillary, 0.17 mm id, 200 mm long G1315-87302
310 mm long
Micro high-pressure G1315-60015 Inlet capillary with G1315-87325 Outlet capillary, 0.12 mm id, 200 mm long G1315-87306
flow cell heat exchanger,
0.12 mm id,
290 mm long
80 nl and 500 nl Flow Cell supplies

Description unit Part No.
Fitting screw 10/pk 5063-6593
Double winged nuts and 1/32 in ferrules 10/pk 5065-4422
1/32 in ferrule and stainless steel lock ring, lite touch 10/pk 5063-6592
Union adjustment tool 2/pk 5022-2146
Universal ZDV union, stainless steel, no fittings 2/pk 5022-2184
Torque wrench adapter G1315-45003 Stainless steel fittings, male (G), 5063-6593
Open end wrench, 4 mm 8710-1534
Double winged PEEK nut & ferrule (WPF),

5065-4422
ZDV universal union, 5022-2184
Wrench, open end, for use with PEEK-coated

fused silica capillaries, 8710-1534
500 nl Flow Cell and replacement Parts

500 nL flow cell Contains quartz flow cell with 10 mm path length and 500 nL G1315-68724
volume and connecting capillaries, max 50 bar pressure
Sealing kit Includes torque adapter, 2 cell seal assemblies, 5 LiteTouch front G1315-68715
and back ferrules
Quartz cell body, 10 mm G1315-80001
Cell seal assembly, 500 nL G1315-87101
Fused silica/PEEK capillary, 100 µm id, 30 cm long Inlet G1315-87333
Fused silica/PEEK capillary, 100 µm id, 12 cm long Outlet G1315-87338
80 nl Flow Cell and replacement Parts

80 nL flow cell Contains quartz flow cell with 6 mm path length and 80 nL volume G1315-68716
and connecting capillaries, max 50 bar pressure
Sealing kit for 80 nL flow cell Includes torque adapter, 2 cell seal assemblies, 5 LiteTouch front G1315-68725
and back ferrules and 5 sleeves for 360 µm od capillaries
Quartz cell body, 80 nL, 6 mm path length G1315-80002
Preparative Flow Cells and replacement Parts

Preparative flow cell, 0.3 mm, 20 bar, quartz G1315-60017
Preparative flow cell, 0.06 mm, 20 bar, quartz G1315-60018
PTFE tubing, 0.8 mm id, 2 m G1315-67301
PTFE tubing, 0.5 mm id, 0.8 m G1315-67302
Cell housing G1315-27705
1/16 in finger-tight PEEK fitting, 2/pk 0100-1516
Quartz body, 0.3 mm G1315-80004
Quartz body, 0.06 mm G1315-80003
Prep flow cell, stainless steel, 3 mm, 120 bar G1315-60016
Finger-tight PEEK fitting (SPF), 0100-1516 Stainless steel connecting capillary, 0.5 mm, 250 mm G1315-87305
96
Detector Maintenance Kits
Detector Maintenance Kits

Standard "D" type flow cell kit Includes 2 windows, 2 gaskets #1, 2 gaskets #2 G1314-65061
Semi-micro flow cell kit Includes 2 windows, 4 gaskets: 2 standard #1, G1314-65056
1 semi-micro #1, 1 semi-micro #2
Micro flow cell kit Includes 2 windows, 2 gaskets #1, 2 gaskets #2 G1314-65052
Cell repair kit, semi-micro Includes window screw kit, 4 mm hexagonal wrench G1315-68713
and seal kits
High-pressure flow cell kit Includes 2 windows, 2 Kapton gaskets and 2 PEEK rings G1314-65054
Diode Array Detector (DAD)/Multiple Wavelength Detector (MWD)
Cell repair kit Includes window screw kit, 4 mm hexagonal wrench and G1315-68712
seal kit
Cell repair kit, semi-micro Includes window screw kit, 4 mm hexagonal wrench G1315-68713
and seal kits
Sealing kit for 500 nL flow cell Includes torque adapter, 2 cell seal assemblies, G1315-68715
5 lite touch front and back ferrules
Sealing kit for 80 nL flow cell Includes torque adapter, 2 cell seal assemblies, G1315-68725
5 lite touch front and back ferrules and 5 sleeves
for 360 µm od capillaries
other Detectors
g4218A 1200 series evaporative light scattering Detector supplies

Standard flow nebulizer G4218-20000
Semi-micro flow nebulizer G4218-20001
Large flow nebulizer G4218-20002
Micro flow nebulizer G4218-20003
RRLC nebulizer G4218-20004
1200 Series Evaporative Light Scattering Detector Nebulization chamber, glass G4218-40000
Black plastic nut, 13 mm diameter, glassware G4218-40010
Black plastic nut, 22 mm diameter, glassware G4218-40011
Black exhaust tube, 2.5 m G4218-40110
Bulkhead G4218-40130
Cartridge, 0.01 µm for gas regulator G4218-40150
Pneumatic tube with stainless steel fitting G4218-40220
Standard flow nebulizer, G4218-20000
Drain tube with stainless steel fitting G4218-40100
Gas regulator with 0.01 µm filter and manometer G4218-60100
Seal kit for nebulization chamber G4218-68010
Caffeine standard, 250 µg/mL G4218-85000
g1362A 1100/1200 series refractive index Detector (riD) supplies

Tubing kit G1362-68709
Cartridge for gas regulator, G4218-40150 Includes 300 mm recycle valve to recycle port, 200 mm recycle valve to waste port,
120 mm purge valve to recycle valve, 270 mm purge valve to sample cell,
170 mm purge valve to reference cell
Interface tubing kit G1362-68706
Includes 1/8 in ferrule, 1/3 in nut, PTFE tubing
Interface capillary, 400 mm, 0.17 mm id G1362-87300
Restriction capillary, 0.17 mm id G1362-87301
98
g1321A/B 1100/1200 series Fluorescence Detector (FlD) supplies

Detector lamp 2140-0600
Flow cell, 8 µL, 20 bar G1321-60005
Flow cell, 4 µL G1321-60015
Cuvette kit, 8 µL, 20 bar G1321-60007
Includes tubing, stainless steel fitting, front and back ferrule, PEEK fitting,
syringe needle and syringe
Cut-off filter kit: Flow cell for G1321A fluorescence detector,
389, 408, 450, 500, 550 nm 5061-3327 G1321-60005
380, 399, 418, 470, 520 nm 5061-3328

280, 295, 305, 335, 345 nm 5061-3329
Corrugated tubing, polypropylene, 6.5 mm id, 5 m 5062-2463
PTFE tubing, FEP, 0.7 mm id, 5 m 5062-2462
1/16 in finger-tight PEEK fitting, 2/pk 0100-1516
Column connecting capillary with fittings, 380 x 0.17 mm G1315-87311
Finger-tight PEEK fitting (SPF), 0100-1516
1/16 in stainless steel front ferrule, 10/pk 5180-4108
1/16 in stainless steel back ferrule, 10/pk 5180-4114
1/16 in stainless steel fitting, 10/pk 5061-3303
Fluorescence detector calibration sample, 1 g glycogen 5063-6597
Open end wrench, 1/4 and 5/16 in 8710-0510
Glass syringe 9301-1446
Syringe needle 9301-0407
Stainless steel front ferrules, 5180-4108
Back ferrules 1/16 in, 5180-4114
1100/1200 series Chip lC supplies
1100/1200 series Chip lC supplies

Rotor, inner valve, 3 grooves, chip LC G4240-23705
Rotor, outer valve, 5 grooves, chip LC G4240-25206
PEEK fitting, special for chip LC G4240-43200
Nano pump to chip cube
Micro well plate sampler to chip cube
Chip cube to waste
Syringe pump to chip cube
Fused Silica/PEEK capillary, 50 µm, 50 cm G4240-87304
Inline micro filter kit, 0.5 µm, PEEK 5067-1582
Use with chip cube LC system
Fitting with 0.5 µm PEEK frit, 10/pk 5067-1584
PEEK fitting for use with 1/32 in od, 10/pk 5067-1585
PEEK sample transfer capillary, 25 µm, 100 cm G4240-87309
Micro inline filter to chip cube (Phospho-Chip application)
PEEK capillary, 25 µm, 10 cm G4240-87310
Micro well plate samper to micro inline filter (Phospho-Chip application)
100
Bio-inert supplies
Agilent 1260 Infinity
Bio-inert Quaternary LC Supplies
For your challenging bio-molecule analyses, the new 1260 Infinity Bio-inert Quaternary LC System sets
new standards in performance, reliability, and robustness. Analysis of proteins and biotherapeutics usually
presents the most challenging solvent conditions for any LC instrument. In addition, bio-molecules tend to
bind unspecifically to surfaces, requiring tedious procedures. To address these needs, Agilent designed this
application-specific LC instrument for bio-molecular analysis – without any compromise in performance –
built on the proven Agilent 1200 Infinity platform technology.
The Agilent 1260 Infinity Bio-inert Quaternary LC features bio-inertness for all components without
exception. The sample flow path through autosampler, capillaries and a variety of detectors are completely
metal-free, with only PEEK and ceramic components coming into contact with your bio-molecule. Thus, the
uncertainty of secondary interaction for proteins and peptides with surfaces which can result in peak tailing,
low recovery and decreased column lifetime is minimized – and your confidence maximized.
1260 Bio-inert Quaternary Pump Parts

Bio-inert purge valve G5611-60061
Bio-inert active inlet valve G5611-60025
Bio-inert cartridge for active inlet valve, 600 bar G5611-60020
Bio-inert outlet ball valve G5611-60067
Sapphire plunger 5067-4695
Bio-inert piston seal G5611-21503
tiPs & tools
Bio-inert wash seal 0905-1731
Bio-inert seal keeper G5611-26210 For information on the
Bio-inert support ring G5611-63010 family of complementary
Preventative maintenance kit for Bio-inert quaternary pump G5611-68741 Biocolumns, turn to page 350.
1260 Bio-inert high Performance Autosampler Parts

2 position/6 port valve head, 600 bar 5067-4131
Rotor seal, 3 grooves, max 600 bar 0101-1416
Bio-inert stator 5068-0060
Stator face, ceramic 0100-1851
Bio-inert needle, 600 bar G5667-87200 Stator face, ceramic, 0100-1851
(Continued)
1260 Bio-inert high Performance Autosampler Parts

Tool for needle adjustment G5667-40500
Bio-inert needle seat assembly, 600 bar G5667-87017
Sapphire plunger 5067-4695
Bio-inert piston seal G5611-21503
Sample loop, 100 µL, Bio-inert G5667-60320
1260 Bio-inert Valve Parts

Rotor seal, 3 grooves, max 600 bar Bio-inert 2 position/6 port switching valve 0101-1409
Bio-inert stator Bio-inert 2 position/6 port switching valve 5068-0060
Stator face, ceramic Bio-inert 2 position/6 port switching valve 0100-1851
Bio-inert rotor, 2-position/10-port, 600 bar 5068-0041
Bio-inert stator, 2-position/10-port, 600 bar 5068-0040
Bio-inert rotor seal, 4 column PEEK Bio-inert 4 column selection valve 5068-0045
Rotor seal, 2 position/6 port, 600 bar for Bio-inert PEEK tube from valve to needle G5664-86703
G1316B, 0101-1409
Bio-inert PEEK tube valve to detector G5664-86706
Bio inert 12 position/13 port, G4235A 5067-4159
solvent selection valve
1260 Bio-inert Detector Parts

Bio-inert standard flow cell, with RFID tag G1315C/D and G1365C/D G5615-60022
Bio-inert max light cartridge cell G4212A/B G5615-60017
Bio-inert union, 600 bar, 5067-4741 Bio-inert max light cartridge cell G4212A/B G5615-60018
Bio-inert FLD flow cell G1321B G5615-60005
PEEK tubing 0890-1763
1260 Bio-inert Fittings

Bio-inert union, stainless steel with PEEK insert 600 bar 5067-4741
1260 Bio-inert Column Compartment

Bio-inert low dispersion heat exchanger G5616-60050
Bio-inert low dispersion heat exchanger,

G5616-60050
102
LC/MS Supplies
Combined with Agilent's industry-leading LC systems, our single quadrupole, ion trap, triple
quadrupole, TOF and Q-TOF LC/MS solutions combine world-class performance with legendary
reliability and ease-of-use.
This section contains all of the mass spectrometry supplies you need to keep your LC mass
spectrometer running at peak performance.
lC/Ms Maintenance schedule
Procedure When to Perform

Flush the nebulizer Daily or at the end of each shift to flush traces of samples and buffers
out of the tubing, valves, and nebulizer.
Clean the electrospray Daily or anytime you suspect carryover contamination from one sample
spray chamber or analysis to another.
Replace the electrospray When the needle is plugged. Common symptoms of a plugged needle
nebulizer needle are increased LC backpressure, off-axis spraying, or dripping from
the nebulizer.
Clean the APCI spray chamber Daily or anytime you suspect carryover contamination from one sample
or analysis to another.
Replace the APCI When the needle is plugged. Common symptoms of a plugged needle
nebulizer needle are increased LC backpressure or off-axis spray from the nebulizer.
Clean the multimode source Daily or anytime you suspect carryover contamination from one
sample or analysis to another, or when you must access the end cap
and capillary cap for cleaning and inspection.
Check calibrant levels Monthly or weekly if you tune the LC/MS frequently.
lC/Ms Preventive Maintenance Kit

For your convenience, the LC/MS Preventive Maintenance Kit has the recommended common supplies
needed for most Agilent LC/MS systems. Unique source parts should be ordered separately.
Agilent 6100 Series lC/Ms Preventive Maintenance kit

Single Quadrupole LC/MS, G6140A
LC/MS Preventive Maintenance kit 5190-1443
Foreline pump (rotary pump) oil, Inland 45, 1 L, for E1M18/E2M28 6040-0834
Oil mist filter element for E2M18 1535-4970
Filter element, 5 µm, 5/pk 0100-2051
Spring, canted coil, 4/pk 1460-2571
Big hydrocarbon trap, 1/4 in fittings BHT-4
Rotor seal, Vespel, pH 0 to 10 0100-1855
Foreline pump oil, 6040-0834
Oil mist filter element for E2M18, 1535-4970
tiPs & tools
Save ordering time and money with the LC/MS PM Kit! It contains the common supplies specified in Agilent service engineer preventive maintenance
procedure for LC/MS platforms.
104
lC/Ms supplies
6100 series 6400 series
single 6300 series triple 6500 series
Quadrupole 6200 series ion trap Quadrupole Accurate-Mass
Description lC/Ms toF lC/Ms lC/Ms lC/Ms Q-toF lC/Ms Part No.
ES nebulizer assembly, original 3 3 3 3 3 G1946-60098
ES nebulizer needle (original) replacement kit 3 3 3 3 3 G2427A
ES nebulizer assembly, new 3 3 3 3 3 G1958-60098
ES nebulizer needle (new) replacement kit 3 3 3 3 3 G1958-60136
APCI nebulizer assembly 3 3 3 3 3 G1946-60037
APCI nebulizer needle replacement kit 3 3 3 3 3 G2428A
Needle assembly APCI/Multimode 3 3 3 3 G1947-60103
Corona needle APCI/Multimode 3 3 3 3 3 G1947-20029
Capillary cap, high temperature, 3.0 mm 3 3 3 3 3 G1946-20301
Capillary, 0.5 mm id, dielectric* 3 3 G1946-80009
Capillary, 0.6 mm id, dielectric* 3 3 3 3 3 59987-20040
Capillary, 0.6 mm id, resistive, fast polarity switching* 3 G1960-80060
Spring, canted coil, 0.25 in id, 0.53 mm 3 3 3 3 3 1460-2571
1/6 in tee, low dead volume, stainless steel 3 3 0100-0969
*Dielectric capillary supports standard polarity switching only. Resistive capillary supports fast polarity switching.
(Continued)
Corona needle APCI, G1947-20029
tiPs & tools

ES nebulizer (original) is compatible with the following ion sources:
• ESI G1948A with Serial Number < US91801994

• ESI G1948B with Serial Number < US91201787
• Multimode G1978A with Serial Number < US90800804
• Multimode G1978B with Serial Number < US90700787
• Dual ESI G3251A with Serial Number < US91200355
• Dual ESI G3251B with Serial Number < US91200355
lC/Ms supplies
Quadrupole 6200 series ion trap Quadrupole Accurate-Mass
Syringe adapter 3 9301-1291
Syringe pump 3 3162-0178
1/16 in finger-tight PEEK fitting 3 3 3 0100-1516
Female luer to female 10/32 adapter 3 3 3 0100-2304
PEEK tubing 3 3 3 0890-1915
Gas-tight syringe, PTFE Luer lock 3 3 3 5182-9710
High-throughput skimmer, 2 mm 3 3 3 G1969-20302
Skimmer 1 (G1956A/B) 3 G1956-20302
HED assembly 3 G1946-80019
HED assembly (G6140A, G6460A, G6530A) 3 G2571-80103
HED assembly 3 G1956-80000
Electron multiplier replacement horn 3 3 3 05971-80103
Replacement horn and dynode 3 3 3 G2441-80010
Electron multiplier replacement horn,

05971-80103
106
lC/Ms Foreline Pump supplies

Oil mist filter kit for E1M18/E2M28 3162-1056
Oil mist cartridge filter for MS40+ G1960-80039
Oil return kit 3162-1057
Foreline pump (rotary pump) oil, Inland 45, 1 L, for E1M18/E2M28 6040-0834
Foreline pump (rotary pump) oil, 4 L, for E1M18/E2M28 6040-0798
Foreline exhaust adapter 59980-20134 Adding foreline pump (rotary pump) oil, 4 L
Hose clamp 1400-0563
Oil mist filter element for E2M18 1535-4970
KF25 clamp, stainless steel 0100-0549
KF25 coseal (inside clamp) 0100-1597
Exhaust tubing 0890-1727
Pump oil drip pan G1946-00034
lC/Ms Chemicals
Quadrupole 6200 series ion trap Quadropole Accurate-Mass
ES/APCI positive ion performance standard,
5 x 1 mL ampoules 3 3 3 3 G2423A
Electrospray LC demo sample (Sulfamix) 3 3* 59987-20033

ESI+APCI LC demo sample 3 G1978-85000
ES negative ion performance standard, 5 x 1 mL ampoules 3 3 G2424A
APCI negative ion performance standard, 5 x 1 mL ampoules 3 G2425A
ES/APCI positive ion performance standard 3 G1946-85004
Multiple-charge compound performance evaluation sample
(horse heart myoglobin) 3 G2426A
ES/APCI positive ion performance standard,

5 x 1 mL ampoules 3 G2423A
ES-TOF reference mix, 6 x 2 mL ampoules 3 3 G1969-85001

ES-TOF biopolymer reference standard kit 3 G1969-85003
Flushing solvent 3 3 3 3 3 G1969-85026
High purity water, 4 L 3 3 3 3 3 8500-2236
Methyl alcohol, 1 L 3 3 3 3 3 8500-1867
Ammonium formate 3 3 3 3 3 G1946-85021
Formic acid, 5 mL 3 3 3 3 3 G2453-85060
Acetonitrile, 1 L 3 3 3 3 3 G2453-85050
*Recommended item for familiarization
lC/Ms Common supplies*

Common Parts
Filter element, 5 µm, 5/pk 0100-2051
Rotor seal, Tefzel, pH 0 to 14 0100-1854
Rotor seal, Vespel, pH 0 to 10 0100-1855
Inlet filter assembly G1946-60180
SSV long drain tubing assembly G1969-60086
Spring, canted coil 1460-2571
Cleaning supplies
Abrasive mesh, 4000 grit 8660-0827
Capillary cleaning wire for dip tube G1946-80054
Cleaning powder, dielectric capillary, Alconox 5190-1401
Cloths, lint-free 05980-60051
Cotton swabs, 100/pk 5080-5400
gas Purifiers
Big hydrocarbon trap, 1/4 in fittings BHT-4
Big moisture trap, 1/4 in fittings BMT-4
Big universal trap, 1/4 in fittings RMSN-4
Big universal trap, 1/8 in fittings, Nitrogen RMSN-2
tools
LC/MS tool kit G1946-60157
Nebulizer adjustment fixture G1946-20215
Nebulizer 25X magnifier G1946-80049
Screwdriver, Torx T15 8710-1622
Screwdriver, Torx T20 8710-1615
Open end wrench, 1/4 and 5/16 in 8710-0510
Wrench, 1/2 and 7/16 in 8710-0806
Needle nose pliers, pointed serrated jaws 8710-0004
3 mm wrench for nebulizer needle adjustment 8710-2699
*These parts are common to all LC/MS systems
108
Quiet Cover
Agilent has a solution to the frequent maintenance of LC/MS and ICP-MS rough pumps (visual check of oil
levels, oil changes, oil additions, clean-up of oil leaks, etc.), as well as the inherent noise produced by the
pumps. Quiet Covers are designed for easy movement, maintenance, and better living with rough pumps
used with Agilent and other LC/MS systems.
• Locking castors to move heavy pump for maintenance

• No tools necessary to remove sectioned cover for easy access to pump
• Built in lift-and-tilt lever raises end of pump to drain oil
• Removable drip pan with well and hand holds to collect and transport oil Quiet Cover MS, G6011A
• Sound absorbing cabinet with resistant foam insulation to reduce pump noise
• Pump mounted to minimize vibration
• 2 Integrated fans maintain temperature inside cover
• LEDs and audible alarm if temperature exceeds 35 °C limit
• Maximum ambient temperature of 35 °C when airflow is neither restricted nor recycled
• Standard one-year warranty; installation and familiarization included with new
LC/MS or ICP-MS orders
Please check www.agilent.com/chem/quietcover for the most up-to-date instrument
compatibility guide.
Please confirm rough pump used in your Agilent system to ensure compatibility.
Quiet Cover
Description Compatible Pump Models Part No. Quiet Cover DS, G6012A
Quiet Cover BOC Edwards Pumps, E2M28, E2M18, or E1M18 G3199B
Quiet Cover MS Agilent MS40+ G6011A
Quiet Cover DS Agilent DS202, DS302, DS402, and DS602 G6012A
Quiet Cover TS Agilent TS300, TS300INV, TS600, TS600INV, and TS800 G6013A
Quiet Cover GC/MS* Agilent DS42, Pfeiffer Duo 2.5 G6014A
*This model does not contain all features.
Quiet Cover MS, G6011A
lC/Ms standards Kits
lC/Ms standards Kits

Caffeine standards kit for LC/MS OQ/PV 8500-6917
Caffeine standards kit for LC/MS-Trap OQ/PV 5065-9908
Sulfa drug standards kit for LC/MS OQ/PV 5188-6523
lC/Ms Application Kit standards

LC/MS pesticide checkout mixture 5190-0469
LC/MS pesticide comprehensive mixture 5190-0551
LC/MS toxicology checkout mixture 5190-0556
LC/MS toxicology comprehensive mixture 5190-0555
LC/MS vet drug checkout mixture 5190-0443
LC/MS vet drug comprehensive mixture 5190-0554
lC/Ms Calibrant Mixes

Calibrant, ES G2421-60001
APCI/APPI calibrant solution, 100 mL G2432A
ESI tuning mix for ion trap, 100 mL G2431A
ES-TOF tuning mix, 100 mL G1969-85000
APCI-L low concentration tuning mix, 100 mL G1969-85010
MMI-L low concentration tuning mix, 100 mL G1969-85020
110
lC/Ms Calibrant Mix and source Compatibility Matrix

6100 series 6140A/6150B 6400 series
single single triple 6500 series
Quadrupole Quadrupole 6200 series toF 6300 series Quadrupole Accurate-Mass
source lC/Ms* lC/Ms lC/Ms ion trap lC/Ms lC/Ms Q-toF lC/Ms
ESI G2421-60001 G1969-85000 G1969-85000 G2431A G1969-85000 G1969-85000
APCI G2432A G1969-85010 G1969-85010 G2432A G1969-850102 G1969-850102
APPI G2432A G2432A G1969-85010 G2432A G2432A2 G1969-850102
MMI G2432A G1969-85000 G1969-85020 G2432A G1969-85020 G1969-85020
NanoESI G1969-850004 G2431A G1969-850004
HPLC-Chip Cube G1969-850002 G1969-850004 G2431A1 G1969-850003 G1969-850004
*G6110A, G6120A/B, G6130A/B
15X dilution suggested
2No autotune
3ESI positive tune only
4Calibration only
CrossLAb PArts And suPPLies
AgilentCrossLaboffersagrowingportfolioofHPLCsuppliesmanufacturedforseamlessperformance
CrossLab withavarietyofnon-Agilentanalyticalinstrumentsinyourlab.Lookinsidethisselectionguidetofind
awiderangeofproductsforyourapplications.
Wecurrentlysupport:
• Waters
• Shimadzu
Agilent
• Dionex*
• CTCAnalytics
• Andmoretocome
Ourgrowingportfolioincludesthefollowingproducts:
• Autosamplersyringes
• Capillaries,tubing,andfittings
• Detectorlamps
• PerformanceMaintenancekits
• Pumpsupplies
• Sampleloops
• Valvesupplies
• Vialsandclosures
• Wellplatesandsealingmats
AgilentCrossLabismorethansupplies:
• Over40yearsofchromatographyexpertise
• Therightsuppliesforbothroutineandchallengingapplications
• Hassle-freeoperationsandreproducibleresults
• High-qualityproductsmanufacturedtoAgilentstandards
• Technicalandapplicationsupport
• Dependableworldwideavailabilityanddelivery
• Convenienceofconsolidatingpurchasing
• 90-dayriskfreemoneybackguarantee
*DionexisnowapartofThermoScientific
Agilent CrossLab works with WATERS SHIMADZU THERMO SCIENTIFIC AND MORE
112
CrossLab Detector Lamps

Ourdetectorlampsaredesignedfor Long-lifedeuteriumlamp,8005-0705
precisealignmentandthermalstability
AgilentCrossLablampsaredesignedandbuilttobecompatiblewithawidevarietyofdetectors,
includingVariableWavelengthDetectors(VWD),MultipleWavelengthDetectors(MWD),andDiodeArray
Detectors(DAD)orPhotodiodeArrayDetectors(PDA).Allthelampsadheretothetightestspecifications
forconsistentqualityandreproducibleperformanceovertheentirelifetimeofthelamps.Testequipment
isregularlycalibratedusingopticalstandardscertifiedbyNIST(NationalInstituteofStandards
andTechnology)orPTB(Physikalisch-TechnischeBundesanstalt).
• ManufacturedinanISO9001certifiedenvironment
• Quartzglassbulbsforextendedlifetime
• Individuallytestedforlightintensity,noiseanddrift,correctoperatingvoltage,andproperalignment
forlowlamp-to-lampvariability
• TightQA/QCwithtraceabilityforeachlampthroughouteverystepoftheproductprocess
• Bothdeuteriumlampsandtungstenlampsavailable
deuterium lamps
• Highoutputstabilityandintensityforextendeddetectioncapabilitiesandimprovedqualification
attracelevel
tiPs & tooLs
• Guaranteedlifetimeof2,000hours
Eachtimeafterareplacementof
tungsten lamps adetectorlamp,itisrecommended
toperformawavelengthcalibrationtest
• Offercoverageinthevisiblewavelengthrangeforhighsensitivitydetection andanintensitytestafterwarmup.
• Averagelifetimerangefrom1,200to5,000hoursdependingonoperationconditions
suchasoperationcycles,softstart,andoperationvoltage
tiPs & tooLs

AnAgilentCrossLabSuppliesSelectionToolisavailabletohelpyouchoosethecorrectsuppliesforyournon-Agilentinstrument.
Formoreinformation,visitwww.agilent.com/chem/selectCrossLab
www.AgiLent.Com/Chem/CrossLAbhPLC 113
CrossLab Vials and Closures

AgilentCrossLabvialsandclosuresarethoroughlytestedtoensurethehighestlevelofquality.Additionally,
CrossLabvialsaredesignedforuseinawiderangeofnon-AgilentGCsandLCs,includingthosefromBruker
(formerlyVarian),Dionex(nowThermoScientific),PerkinElmer,Shimadzu,andThermoScientific.Theyare:
• ManufacturedinanISO9001certifiedfacility
• MadefromFirstHydrolyticType1ClassAorClassBborosilicateglass,whichconformstoUSFDA,
USP,andEUPharmacopeiastandards
• Protectedbyproprietarypackagingwithacrushbarriertoreducevialbreakage
Snaptopvialswithwrite-onspot,8010-0025
• Packagedinmaterialthathasbeentestedandselectedforcleanliness
• Subjectedtorigorousend-of-linesamplingandqualitycontrolprocedurestoensureallvialsremain
withinspecifications
• Compatiblewithawidevarietyofautosamplersregardlessofmakeandmodel
For Agilent CrossLab Vials and Closures ordering information please see
the General Chromatography catalog (publication # 5991-1059EN)
tiPs & tooLs
easy, reliable ph testing, designed for Chromatographers
AgilentnowoffersafulllineofpHmetersandelectrodes.Designedforchromatographers,
thesepHmetersofferintuitiveuserdesignandexceptionalruggednessforyourlab.
Learnmoreatwww.agilent.com/chem/phmeters
114
CrossLab Well Plates and Sealing Mats

Choosethecleanestwellplates
andsealingmatsforyourautosamplers 96-wellplate,8010-0534
Advantages of Agilent CrossLab well plates: Advantages of Agilent CrossLab sealing mats:
• Madefrompolypropylene • Protectwellcontentsduringstorage
• FreefromRNase,DNase,Endotoxins,andhumanDNA • FreefromRNase,DNase,Endotoxins,andhumanDNA
• Chemicallyresistanttocommonsolvents • Highlyflexibleforatightsealandexactfit
• Autoclavable(121°C/20min) • Insetsineverywelleliminatetheneedforglueduringconnection
• Alpha-numericgrid • Pierceablewithpipettetips(0.5mLand1.0mLsealingmats)
• Compatiblewithpipettingworkstationsandmulti-channelpipettes • Preventsolventevaporation
• Raisedrimsareavailablewith0.5mLand1.0mLdeepwellplates • Madefromthermoplasticelastomer(TPE)orethylene-vinylacetate(EVA)
forefficientsealingandareducedriskofcross-contamination • Compatiblewithcommonsolvents
duringrigorousvortexing
• Availablein96-or384-wellplateformat
• 96-wellplatesrangefrom0.2mLto2mL
• 384-wellplatesavailablein0.1mLand0.25mL
• Stackable
For Agilent CrossLab Well Plates and Sealing Mats ordering information please see
Cleanliness of well plates and sealing mats: Agilent CrossLab vs. the competition
BlankincompetitorA1.0mL96-wellplate
20000000
BlankincompetitorB1.0mL96-wellplatewithmatchingsealingmat
TotalIonCurrent(TIC)
15000000
BlankinAgilentCrossLab1.0mL96-wellplatewithmatchingsealingmat Thechemicalextractionexperimentsdemonstratethesuperior
10000000 cleanlinessoftheAgilentCrossLabwellplatesandsealingmats
comparedtothecompetition,makingthemidealforLC/MSapplications.
Reagentblank
5000000
Systemblank
0
0 1 2 3 4 5 6 7 8 9 min
LC/MSESIpositivechromatogramcomparison.Reagentblank:1:1Acetonitrile/H2Owith0.1%formicacid
CrossLab Autosampler Syringes and Manual Syringes

Agilent'sCrossLabHPLCsyringeportfoliocontainsabroadselectionofsyringestylesandvolumestoprovidewhatyouneedforaccurateandeffective
sampling.Fromautosamplersyringesinbothlargeorsmallvolume,tosyringesforpumppriming,CrossLabsyringesmeetallform,fit,andfunctioncriteria
tosupportyourHPLCsystems.
• Accuracytowithin±1%ofnominalvolumewithaprecisionof1%at80%ofthetotalvolume
• Achemicallyinertfluidpathofstainlesssteel,borosilicateTypeIglass,orPTFE
• Robustdesignforlonglifetime
Agilent CrossLab syringe Features
Pointstyle Termination Flange
Needlegauge Barrelwithgraduations Fittedplunger
116
Syringeterminationsattheendofthesyringebarrelfunctionastheinterfacebetweenthesyringeanditsmatingconnectionsuchastheneedle.
Terminationsareofferedinanumberofdifferentneedleandconnectionconfigurationstoaccommodateabroadrangeofapplications.
Fixed needle
• Economicaloptionforinjections
• Preferredforapplicationsrequiringtracelevelsamples
• Needleiscementedintotheglasssyringebarrelatapointcorrespondingtothezerograduationmark
• Deadvolumeislimitedtotheneedle’sinternalvolume
• Notautoclavable
• Recommendedforusewhereprobabilityofneedlebendingisminimal
removable needle
• Versatileoptionforinjections
• Needleseatspreciselyatthezerograduationmark
• Needlecanbereplacedifdamagedorclogged
• Allowsforaremovableneedlewithoutincreasingdeadvolume
• Idealforwhenthereisariskofneedleclogging
• Autoclavablewhendisassembled(repeatedautoclavingshortenssyringelife)
PtFe Luer Lock

• PTFE,maleLuertaperwithnickel-platedbrasslockinghubforusewithKel-Fneedlesormetalhub
needles,anduniversalconnectors
• Autoclavablewhendisassembled,excepton25mLorgreatersyringes(repeatedautoclavingshortens
syringelife)
Chem
• ¼-28UNFmalefittingthreadconnection
• Usedforlow-volumeapplicationswheresystemdeadvolumemustbeminimized
• Canbescreweddirectlyintoinjectionvalves
note: MostmanualHPLCinjectionvalvesaredesigned
tobeusedwitha22-gauge,ora22s-gauge
NeedleGauge22 NeedlePointStyle3 bluntneedlepointstyle3.
gauge selection Chart
nominal od nominal id wall thickness Volume

gauge in mm in mm in mm µL/in
22s* 0.0280-0.0285 0.718 0.0055-0.0077 0.168 0.022 0.55 0.563
22 0.0280-0.0285 0.718 0.0155-0.0170 0.413 0.012 0.30 3.403
*note: 22sneedleshaveasmallerinnerdiameterandathickerwallforbetterdurability.
tiPs & tooLs

Replacesyringeifdirtisnoticeable,syringescannotbecleaned,orplungerdoesnotslideeasily.
tiPs & tooLs

Followmanufacturer'srecommendationforsyringecleaningandregularlyinspectsyringebarrelforsamplebuild-upandneedletipforwear.
118
Autosampler Routine Maintenance

RoutineautosamplermaintenanceshouldbeperformedonaregularbasistokeepyourHPLCsystemperformingatitsoptimumlevel.Youcanperformall
maintenanceproceduresatonceorasneeded.Somepartsmayneedtobereplacedmoreoftenthanothersdependinguponyourapplicationandsolvent
preparationprocedures.
Regularautosamplermaintenancehelpsloweroperatingcostsandgeneratepreciseresultswiththeutmostconfidence.Byfollowingaregularmaintenance
routine,youcancountonmaximumuptimeduringthelifeofyourautosampler.
waters Autosampler routine maintenance Procedures

• Replacethemeteringsyringe
• Rebuildtheinjectorsealpackandreplacetheneedle
• Rebuildthehigh-pressuremotorizedvalves
• Replacethein-linefilterinsert
• Adjustthesealpacksealvalves
waters Autosampler routine maintenance and troubleshooting
symptom Cause solution

Poorinjectionreproducibility Lowsamplelevelinvials Confirmsamplelevelinthevialsisatminimumaquarterfull
Wornmeteringsyringe Replacethemeteringsyringeassembly
Wornhigh-pressuremotorizedvalveseals Rebuildthehigh-pressuremotorizedvalves
Leakingwastevalve Replacethewastevalve
Worninjectorseals Rebuildtheinjectorsealpack,replacetheneedle,andadjusttheseal
packsealvalves
Leakingsyringe Wornmeteringsyringe Replacethemeteringsyringeassembly
Samplecarryover Needlewashsolventexhausted Refilltheneedlewashsolventreservoir
Dirtyneedlewashseals Rebuildthesealpackandadjustsealpacksealvalves
Faultyneedlewashvalve Replacetheneedlewashvalve
Samplevialsfillingduringinjectioncycle Wornhigh-pressuremotorizedvalveseal Rebuildthehigh-pressuremotorizedvalves
Lowpeakresponse Lowsamplelevelinvials Confirmsamplelevelinthevialsisatminimumaquarterfull
Wornmeteringsyringe Replacethemeteringsyringeassembly
Wornhigh-pressuremotorizedvalveseals Rebuildthehigh-pressuremotorizedvalves
Worninjectorseals Rebuildtheinjectorsealpack,replacetheneedle,andadjusttheseal
packsealvalves
shimadzu Autosampler routine maintenance Procedures

• Replacethesamplemeteringdriveplungerseal
• Replacethesampleneedle
• Replacetheneedleseatseal
• Ifequipped,replacetherinseportseptum
• Ifequipped,cleanthehigh-pressurevalveandreplacethehigh-pressurevalverotorseal
• Ifequipped,cleanthelow-pressurevalveandreplacethelow-pressurevalverotorseal
• Ifequipped,cleantheinjectionvalveandreplacetheinjectionvalverotorseal
• Adjusttheneedleifnecessary
shimadzu Autosampler routine maintenance and troubleshooting

Wornmeteringseal Replacethemeteringplungerseal
Damagedmeteringplunger Replacethemeteringplunger
Wornhigh-pressurevalveseals Rebuildthehigh-pressurevalve
Wornlow-pressurevalveseals Rebuildthelow-pressurevalve
Damagedsampleneedle Replacethesampleneedleandneedleseatseal
Dirtyneedlewashseals Rebuildthesealpackandadjustsealpacksealvalues
Contaminatedrinseport Cleanandflushtherinseport
Wornmeteringplungerseal Replacethemeteringplungerseal
Damagedmeteringplunger Replacethemeteringplunger
Wornhigh-pressurevalveseals Rebuildthehigh-pressurevalve
120
dionex* Autosampler routine maintenance Procedures

• Replacethesamplemeteringsyringe
• Replacethesampleneedle
• Replacetheneedleseatseal
• Ifequipped,cleantheinjectionvalveandreplacetheinjectionvalverotorseal
• Replacethebuffertubing
• Replacethecapillarytubing
• Fillthesyringereservoir
• Adjusttheneedleifnecessary
*dionex is now a part of thermo scientific
dionex Autosampler routine maintenance and troubleshooting

Wornmeteringsyringeseal Replacethemeteringsyringe
Wornsyringevalve Replacethesyringevalve
Worninjectionvalveseal Rebuildtheinjectionvalve
Leakingfittings Checkallthefittingsforleaks
Dirtyneedlewashseals Rebuildthesealpackandadjustsealpacksealvalves
Contaminatedrinseport Cleanandflushtherinseport
Leakingsyringe Damagedsyringe Replacethesyringe
Wornsyringevalve Checkforleaksandreplaceifnecessary
Wornsyringevalve Replacethemeteringsyringe
Damagedsyringevalve Checkthesyringevalveforleaksandreplaceifnecessary
Worninjectorvalveseal Rebuildtheinjectionvalve
Leakingfittings Checkallthefittingsforleaks
CrossLab Pump Supplies

Properpumpmaintenancehelpsensureprecise,
Sapphireplungerassembly,8005-0538 consistentresultsandloweroperatingcosts
Regularpumpmaintenancehelpsloweroperatingcostsandensurepreciseandconsistentresults.By
followingaregularmaintenanceroutine,youcancountonmaximumuptime,steadyandaccuratesolvent
flow,pressurestabilitythroughoutthelifeofapump,andkeepyourHPLCsysteminitsoptimumcondition.
CrossLab Plungers and seals

Plungersealreplacementkit,8005-0541
Plungers(orpistons)andsealsaretwoofthemostimportantcomponentsofapump.AllAgilentCrossLab
plungerscombinedwithsealsundergoextensivetestingundertemperaturestresswithcommonHPLC
solventsforreproducibleresults.
Plungers:
• Availableinsapphireorceramic
Facesealsreplacementkit,8005-0536 • Sapphireplungersaremadefromhighpuritymonocrystallinesapphireforoptimalconcentricity
andresistancetowear
• Aremeticulouslycutandpolishedforgreatdurabilityandlonglife
Seals:
tiPs & tooLs
• Manufacturedfromultra-high-molecular-weightpolyethylene(UHMWPE)orgraphite-filled
Plungers(orpistons)shouldbe polytetrafluoroethylene(GFP)
exchangedonaregularbasis • Designedtoprovideprecisesealingaroundtheplungers
incombinationwithsealstomaintain • Engineeredtodelivertopperformanceoverhighlydynamicflowandpressureranges
thebestsealingsurfaceanddurability
foroptimalinstrumentperformance.
tiPs & tooLs

Dependingonyourapplicationsand
solventpreparationprotocols,some
partsmayneedtobereplacedmore
oftenthantheothers.
122
CrossLab Check Valves

Checkvalvesarekeycomponentsforapump,andtheirlifetimeisoftenrelatedtothesolventsused.
Adefectivevalvecanleadtopressurefluctuation,inconsistentflow,andanoisybaseline.
AgilentCrossLabcheckvalvesandassemblycomponents:
• Madetooperateatdifferentpressures(upto16,000psi,or1,100bar)perspecificationsfrom
theOriginalEquipmentManufacturers(OEMs)
• Madefromavarietyofmaterials,suchasstainlesssteel,titanium,ceramic,andPEEK,
dependingonOEMspecifications
• Carefullyassembledtoensurereliabilityandconsistentperformance
• Eachrubyorceramicballandsapphireorceramicseatismanufacturedunderextremelytight
tolerancestoensurepropersealingwithintheoperatingpressurerange
tiPs & tooLs

Don'tforgettocheckyourcheckvalveregularlyandreplacecheckvalvecartridgestoensureproperpumpoperations.
HPLC Pump Routine Maintenance

tiPs & tooLs
RoutinepumpmaintenanceshouldbeperformedonaregularbasistokeepyourHPLCsystem
Pumpsealsshouldbereplacedwhen performingatitsoptimumlevel.Youcanperformallmaintenanceproceduresatonceorasneeded.
thereareleaksonthebottomofthe Somepartsmayneedtobereplacedmoreoftenthanothersdependinguponyourapplication
pumphead,whenretentiontimesare andsolventpreparationprocedures.
inconsistent,orwhenthepressure
Regularpumpmaintenancehelpsloweroperatingcostsandgeneratepreciseresultswiththeutmost
rippleisunstable.
confidence.Byfollowingaregularmaintenanceroutine,youcancountonmaximumuptimeandasteady,
accuratesolventflowforthelifeofthepump.
waters Pump routine maintenance Procedures

• Replacethesealsandplungers(orpistons)
• Replacethein-linefilterinsert
• Replacethecheckvalvecartridges
• Replacethesealwashsealsandtubeseals
Sapphireplungerassembly,8005-0523 • Replacethesolventinletfrits
waters Pump routine maintenance Procedures

Pressurerippleunstable Dirtycheckvalvecartridge(s) Runstaticleaktesttoverify
andexchangethecheckvalvecartridge(s)
Leakonpumphead Runstaticleaktesttoverifyandexchange
thein-linefilterinsertandplunger(orpiston)seals
Gradientperformanceproblems Blockedsolventfilter(s) Changethesolventfilter(s)
Intermittentpressurefluctuations
Apressuredropofgreaterthan10bar(150psi) Dirtyin-linefilter Exchangethein-linefilterinsert
acrossthein-linefilter(5mL/minH2Oduringwetpriming)
Leaksatlowerpumpheadside Highsealwear Runleaktesttoverifyandexchangethepumpsealsandin-line
Unstableretentiontime filterinsert
Pressurerippleunstable
Seallifetimeshorterthannormallyexpected Scratchonplunger Checkplungerswhilechangingtheseals
Exchangetheplungersifdamagedorscratched
Lossofwashsolvent Leakywashseals Exchangethewashseals
124
shimadzu Pump routine maintenance Procedures

• Replacethesealsandplungers(orpistons)
• Replacethein-linefiltercartridge
• Replacethesealwashseals Plungerseal,8001-0502
• Replacethesolventinletfrits
shimadzu Pump routine maintenance and troubleshooting

Pressurerippleunstable Dirtycheckvalvecartridge(s) RunPumpPressuretesttoverifyandexchangethecheckvalve
cartridge(s)
Leakonpumphead RunPumpPressuretesttoverifyandexchangethein-linefilter
insertandplunger(orpiston)seal
Checkinletandoutletfittingsforleaks
Tightenallfittingsandre-runthePumpPressuretest
Gradientperformanceproblems Solventfilter(s)isblocked Changethesolventfilter(s)
Apressuredropofgreaterthan10bar(150psi)acrossthe Dirtyin-linefilter Exchangethein-linefilterinsert
in-linefilter(5mL/minH2Oduringwetpriming)
Leaksatlowerpumpheadside Highsealwear RunPumpPressuretesttoverifyandexchangethepumpseals
Unstableretentiontime andin-linefiltercartridge
Broadpeaksorpeaktailing
Lossofwashsolvent Leakywashseals Exchangethewashseals
dionex* Pump routine maintenance Procedures

• Replacethepurgevalvecapseal
• Replacetheseals,sealrings,andplungers(orpistons)
• Replacethein-linefiltercartridge
Vespelrotorseal,8002-0602
• Replacethesealwashsealsandsealwashtubing
• Replacethemixingchambergasket
• Replacethesolventinletfilterfrits
*dionex is now a part of thermo scientific
dionex Pump routine maintenance and troubleshooting

Pressurerippleunstable Dirtycheckvalvecartridge(s) RunPumpPressuretesttoverifyandexchangethecheckvalve
cartridge(s)
Leakonpumphead RunPumpPressuretesttoverifyandexchangethein-linefilter
insertandplunger(orpiston)seal
Checkinletandoutletfittingsforleaks
Tightenallfittingsandre-runthePumpPressuretest
Gradientperformanceproblems, Solventfilter(s)isblocked Changethesolventfilter(s)
Apressuredropofgreaterthan10bar(150psi) Dirtyin-linefilter Exchangethein-linefilterinsert
acrossthein-linefilter(5mL/minH2Oduringwetpriming)
Leaksatlowerpumpheadside Highsealwear RunPumpPressuretesttoverifyandexchangethepumpseals
Unstableretentiontime andin-linefiltercartridge
Broadpeaksorpeaktailing
Lossofwashsolvent Leakywashseals Exchangethewashsealsandsealwashtubing
126
CrossLab Valve Supplies

AgilentCrossLabvalvesuppliesworkseamlesslywithyourHPLCsystemsforreliable,accurate,
andreproducibleresults.
rotor seals:
Avarietyofmaterialsforawiderangeofapplications
Arotorsealisapolymericdiskthatcreatesahigh-pressuresealagainstthestatororstatorfaceseal.
Avarietyofmaterialsareavailablefordifferentapplications.Itisimportanttoreplacerotorsealsona
routinebasistopreventexcessivewear.Therecommendedreplacementintervalformostrotorseals Rotor,6-portvalve,8001-0601
isonceperyearforpreventivemaintenanceorasneededdependingonstressesimposedby
specificapplications.
• Vespel:Vespelisapolyimidewithlowwearandhighchemicalresistance.Recommendedforuse
withsolutionsunderpH10;becausemorebasicsolutionsdissolveVespelovertimeanddamage
therotorseal
• PEEK(Polyetheretherketone):PEEKoffershighresistance,versatility,andapplicabilityfortheentire
pHrangebetween0and14
• Tefzel:RecommendedforuseinapplicationswherePEEKcannotbeused,suchashigher
concentrationsofmethylenechlorideordimethylsulfoxide(DMSO)
recommended ph levels for rotor seal materials tiPs & tooLs

ph range 0-7 7-10 10-14 ForanysolutionabovepH10,
Vespel aPEEKrotorsealisrecommended.
PEEK
Tefzel
tiPs & tooLs
PEEKrotorsealsareincompatiblewith
concentratednitricandsulfuricacids.
stators
• Availablein316stainlesssteel,PEEK,andceramicdependingonthespecificationsofOEMs
• Typicallyrequirereplacementonlyiftheportsorsealingsurfacesbecomedamaged,which
canbepreventedbyusingproperinjectionneedles.
Stator,6-portvalve,8001-0604
sample Loops
Stainless Steel Sample Loops:
• Haveburr-freeandsquare-cutendstoensureaflushconnectiontovalveports
• Actualvolumesmightdifferduetotoleranceofmetaltubingbore
• Accuracyoflargemetalloops(1.0mm,0.040inbore)is±14%,intermediateloops
(0.5mm,0.020inbore)is±21%,andsmallloops(0.2mm,0.007inbore)is±65%
PEEK Sample Loops

tiPs & tooLs • Alternativestostainlesssteelsampleloops
Concentratednitricacidandsulfuric • Clean,straightcutsforeasyvalveinstallationandlowdeadvolumeconnections
acidweakenPEEKtubingwhile • Inerttoalmostallorganicsolventsandbiocompatible
tetrahydrofuran(THF),methylene • Actualvolumesmightdifferduetotoleranceofmetaltubingbore
chloride,andDMSOcauseswelling. • AccuracyoflargePEEKloops(0.8mm,0.030inbore)is±5%,intermediateloops
(0.5mm,0.020inbore)is±10%,andsmallloops(0.2mm,0.007inbore)is±30%
• Wallthickness,temperature,concentrationoforganicsolvent,andsolventexposuretimeaffect
thedurabilityofPEEKtubing
tiPs & tooLs

Sincebothstandardsandunknowns
areusuallyanalyzedusingthesame
sampleloops,knowledgeofthe
actual,accuratevolumeisrarely
needed.Ifthesampleloopvolume
mustbeknown,itisbesttocalibrate
theloopinplaceonthevalvesothe
flowpassagesinthevalvearetaken
intoaccount.
128
CrossLab Performance Maintenance (PM) Kits

PMkitsmakeiteasiertokeep
yourinstrumentsrunning 515pumpPMkit,8005-0913
atpeakperformance
Manyinstrumentfailuresarecausednotbyfunctionalbreakdowns,butbyalackofperformance
maintenance.Assuggestedbyarecentstudy,aregularperformancemaintenanceprogramcanreduce
instrumentfailureratesupto25%,andiscriticaltoensureoptimaloverallsystemoperations.
2960/2965PMkit,8005-0915
the effect of Performance maintenance

Predictedfailure
rateextrapolation
NumberofInstalledInstruments
up to 25% reduction
in failures
Failures
Improvedperformance
maintenanceregime
Failure
implementedonsite
Time
AgilentCrossLabPMkitscontainthenormalwearparts,toolsfordisassembly/reassembly,
andinstructionsnecessarytokeepyoursystemsoperatingatpeakperformance.Thekitsprovide
aconvenient,cost-effectivewaytomakesureyourinstrumentsareproperlymaintained.Eachkit
containsallthepartsyouneedto:
• Boostsystemefficiencyandreliability
• Reduceunplanneddowntimeandrepaircosts
• Increaseaccuracybyenhancingprecisionandsensitivity
• Complywithregulatoryrequirements,ormeetqualityaccreditationstandards
• Extendinstrumentusefullife
• Eliminateindividualpartordering
• PMkitsavailableforpumps,valves,autosamplers,andHPLCsystems
general hPLC supplies

CrossLab LC Capillaries and Tubing
Yourlinktoanalyticalsuccess
AgilentCrossLaboffersarangeofcapillariesandtubingmadefromstainlesssteelandPEEK.Usedin
combinationwiththerightfittings,theyareidealforLCsystemplumbing,providinganinertsurface,tight,
leak-freeconnections,andzerodeadvolumes.
stainless steel capillaries

• Madeofultra-cleanstainlesssteeltubing
• Idealformoststandardapplications,andthebestchoiceforreliablehigh-pressuresealing
• Smoothinnersurfaceforthelowestbackpressure
• Precisioncuttingforburr-free,square-cutendswithoutinner-diameterdistortion
• Bothendsacceptstandardfittings
tiPs & tooLs • Predefinedlengthsforspecificpathlocationstoavoidpeakbroadening
Alwaysusethesmallestcapillaryinternal • Individuallytestedtoensurereproducibility
diameterandtheshortestlengthtokeep • Availableinpre-swagedandnonpre-swaged
sampledispersionaslowaspossible.
PeeK tubing
• Flexibleandeasytocuttodesiredlengths
• Idealforfrequentlychangedconnections
• Resistsmechanicalandsolventdamage,evenathightemperatures
• Biocompatibleandinerttoalmostallorganicsolvents
• Adurablealternativetostainlesssteelconnections
• AcceptsbothstainlesssteelandPEEKfittings
130
CrossLab Fittings
TherightLCfittingsmakethebestLCconnections
Toensureleak-freeconnections,andtopreventthelossofpeakshapeandresolution,alwaysusethe
recommendedfittingstyleforcolumns,valvesandunions.
WithAgilentCrossLabfittings,yougettheconfidenceandchoicethatcomewith:
• Robustdesignforlonglifeandsmooth,leak-freeoperation
• Stainlesssteelnutsandferrulesforhigh-pressuresystems
• Polymerfittingsforbiocompatibleapplications
CrossLab HPLC In-Line Filters

Helpstoptime-wastingblockages
Columninletfritcontaminationcanincreasebackpressureandreduceefficiency.Microborecolumn
blockagesareofparticularconcern,duetothefrit’ssmalldiameter.
Tohelppreventtime-wastingcontaminationandblockages,theAgilentCrossLabportfolioofferstwotypes
ofLCfiltersmadefromclean,high-qualitystainlesssteelparts:
• In-linesolventfilters,installedbetweentheLCpumpandinjector,preventblockagesbyremoving
particlesfromsolventsbeforetheyreachtheinjector
• Columninletfilters,positionedimmediatelybeforeanLCcolumn,removeparticlesfromboththe
injectionsystemandsample
132
Troubleshooting Guide for HPLC Systems

Theat-a-glancetablescanhelpyoupinpointandsolvethemostcommonproblemsforyourHPLCsystemsandensuremaximum
instrumentuptimeandproductivity.
hPLC troubleshooting
symptom type Possible Cause solution

Baselinedisturbance Positive/negative–Differenceinrefractiveindex Usemobilephaseforsamplesolvent
atvoidtime ofinjectionsolvent
Detectorleaks Pluggedinletfrit Replaceseals/gaskets
Driftingbaseline Positivedirection–Contaminantbuildup/elution Flushcolumn,cleanupsample,usepuresolvents
Positive/negative–Differenceinrefractiveindex Usemobilephaseforsamplesolvent
ofinjectionsolvent
Negativedirection(gradient)–Absorbanceof"A" Usenon-absorbingorHPLC-gradeorbettersolvent
mobilephasesolvent
Positivedirection(gradient)–Absorbanceof"B" Usenon-absorbingorHPLC-gradeorbettersolvent
mobilephasesolvent
Random–Temperaturechanges Insulatecolumnandtubing
Random–Temperaturechanges Thermostatcolumnandtubing
Wavyorundulating–Temperaturechangesinroom Monitorroomtemperatureandcontrol
Ghostpeaks Peaksfrompreviousinjection Flushcolumntoremovecontaminants
Contamination Samplecleanuporpre-fractionation
Unknowninterferencesinsamples Samplecleanuporpre-fractionation
Ion-pair–Upsetequilibrium Preparesampleinactualmobilephasetominimizedisturbance
Peptidemapping–OxidationofTFA Preparefreshdaily;useanti-oxidant
Reversed-phase–Contaminatedwater Checksuitabilityofwaterbyrunningdifferentamount
throughreversed-phasecolumnandmeasurepeakheight
withelution;useHPLCgradesolvents
Spikes–Bubblesinsolvent De-gassolvents
(Continued)

Highcolumnbackpressure Columnblockage,adsorbedsample Bettersamplecleanup;useguardcolumn
Mobilephaseviscositytoohigh Uselowerviscositysolventsorhighertemperature
Particlesizetoosmall Uselargerdp packing
Pluggedinletfrit Replacecolumn
Pluggedinletfrit Reversesolventflow
Leaks Subtle–Whitepowderatfitting/loosefitting Tightenfittings,cuttubing,orreplaceferrules
Leaks,injectionvalve Catastrophic–Wornvalverotor Replacerotorinvalve
Leaks,column Catastrophic–Loosefittings Tightenorreplacefittings
orotherfittings
Leak,pump Catastrophic–Pumpsealfailure Replacepumpseal
Negativepeaks RIdetector–soluterefractiveindexlessthansolvent Noproblem;reversepolaritytomakepositive
UVdetector–soluteabsorbancelessthanmobilephase UsemobilephasewithlowerUVabsorbance;
donotrecyclesolventtoolong
Noisybaseline Random–Contaminantbuildup Flushcolumn;cleanupsample;useHPLC-gradesolvent
Continuous–Detectorlampproblem Replacedetectorlamp
Occasional–Externalelectricalinterference UsevoltagestabilizerforLCsystem
Peakdoubling Samplevolumetoolarge Reducethevolumee.g.byhalfandre-inject
Injectionsolventtoostrong Useweakerinjectionsolventormobilephase
Blockedfrit Replaceanduse0.5µmporosityin-linefilter
Columnvoidorchanneling Replacecolumn;forsomecolumns,fillinvoidwithpacking
Unsweptinjectorflowpath Replaceinjectorrotor
Voidatheadofcolumn Replacecolumn,topoffcolumnwithpacking
Columnoverloadedwithsample Usehighercapacitystationaryphase
Increasecolumndiameter
Decreasesamplesize
Singlepeak–interferingcomponents Samplecleanup;pre-fractionation
(Continued)
134

Peaktailing Beginningofpeakdoubling See"peakdoubling"
Unsweptdeadvolumes Minimizenumberofconnections
Ensureinjectorsealistight
Ensurefittingsareproperlyseated
Basiccompounds–Silanolinteractions Chooseendcappedbondedphase
Switchtopolymericphase
Basicsubstances–Silanolinteractions Usestrongermobilephaseoraddcompetingbase(e.g.TMA)
Silica-based–Columndegradation Usespecialtycolumn;polymericcolumnorstericallyprotected
Peaksarebroad Injectionvolumetoolarge Decreasesolventstrengthofinjectionsolventtofocussolute
Peakdispersionininjectorvalve Introduceairbubbleinfront/backofsample
todecreasedispersion
Samplingrateofdatasystemtooslow Increasefrequencyofsampling
Slowdetectortimeconstant Adjusttimeconstanttomatchpeakwidth
Mobilephaseviscositytoohigh Increasecolumntemperature
Detectorcellvolumetoolarge Usesmallestpossiblecellvolumewithnoheatexchanger
insystem
Injectorvolumetoolarge Decreaseinjectionvolume
Longretentiontimes Usegradientelutionorstrongermobilephase
Pressurefluctuation Leakycheckvalve Replacecheckvalve
Pumpsealleaks Replacepumpseals
Buildupofparticulates Filtersample;in-linefilter;filtermobilephase
Pressureincreasing Buildupofparticulates Filtersample;in-linefilter;filtermobilephase
Water/organicsystems–bufferprecipitation Testbuffer-organicmixtures;ensurecompatibility
Retentionbeyond Sizeexclusion–Specificinteractions Addmobilephasemodifiersorchangesolvent
totalpermeationvolume
(Continued)

Retentiontimeschanging Columntemperaturevarying Thermostatcolumn;insulatecolumn;
ensurelabtemperatureconstant
Equilibrationtimeinsufficientwithgradientrun Makesureatleast10columnvolumespassthroughcolumn
orchangesinisocraticmobilephase aftersolventchangeorgradientconclusion
Selectiveevaporationofmobilephasecomponent Lessvigorousheliumsparging;keepsolventreservoirs
covered;preparefreshmobilephase
Buffercapacityinsufficient Use>20mMconcentrationofbuffer
Inconsistenton-linemobilephasemixing Ensuregradientsystemdeliveringconstantcomposition;
checkvs.manualprepofmobilephase
Contaminationbuildup Occasionallyflushcolumnwithstrongsolvent
toremovecontaminants
Firstfewinjections–Adsorptiononactivesites Conditioncolumnbyinitialinjectionofconcentratedsample
Retentiontimesdecreasing Flowrateincreasing Checkpumptomakesurecorrect;ifnot,reset
Columnoverloadedwithsample Decreasesamplesize
Lossofbondedstationaryphase KeepmobilephasepHbetween2and8.5
Retentiontimesincreasing Flowrateisslowing Fixleaksinliquidlines,replacepumpseals,
checkforpumpcavitationorairbubbles
Activesitesonsilicapacking Usemobilephasemodifier
Lossofbondedstationaryphase KeepmobilephasepHbetween2and8.5
Mobilephasecompositionchanging Makesuremobilephasecontaineriscovered
Activesitesonsilicapacking Addcompetingbasetomobilephase
Activesitesonsilicapacking Usehighercoveragepackingforstationaryphase
Sensitivityproblem Peaksareoutsideoflinearrangeofdetector Dilute/concentratetobringintolinearregion
Firstfewsampleinjections–Absorptionofsample Conditionloop/columnwithconcentratedsample
inlooporcolumn
Autosamplerflowlinesblocked Checkflowandmakesuretherearenoblockages
Injectorsampleloopunderfilled Makesurethatloopisoverfilledwithsample
Sample-relatedlossesduringpreparation Useinternalstandardduringsampleprep;
optimizesampleprepmethod
Slowcolumnequilibration Equilibrationtimeslowforlong-chainion-pairingreagents Useshorteralkylchainion-pairreagent
times(ion-pairing)
136
CrossLab supplies for waters hPLC systems

detector Lamps
similar to Agilent
oem CrossLab
model description Part no. Part no.
2996PhotodiodeArrayDetector Long-lifedeuteriumlamp,2,000hours WAT052586 8005-0705
996PhotodiodeArrayDetector
ACQUITYUPLC2996PhotodiodeArrayDetector
2487DualWavelengthAbsorbanceDetector Long-lifedeuteriumlamp,2,000hours WAS081142 8005-0704
2488MultichannelAbsorbanceDetector
ACQUITYTUVDetector
UPLCTUVDetector
486TunableUV/VisibleAbsorbanceDetector Long-lifedeuteriumlamp,2,000hours 700000356 8005-0702
LCModule1 WAT052666
Autosampler syringes, 1/pk

Agilent Agilent
similar to Agilent CrossLab CrossLab similar to
Volume needle gauge/ oem CrossLab replacement replacement oem
model (µL) description Length (mm)/tip Part no. syringe needle Plunger Part no.
2777Compact 10 Fixedneedle 22s/51/3 430000859 8010-0445* 8010-0457, 700002212
SampleManager 10/pk
2777SampleManager 25 Fixedneedle, 22s/51/3 430000861 8010-0441 8010-0458, 700002213
gastight 10/pk
100 Fixedneedle, 22s/51/3 430000864 8010-0442* 8010-0459, 700002214
gastight 10/pk
Fixedneedle, 22/51/3 430000863 8010-0446* 8010-0459, 700002214
gastight 10/pk
250 Fixedneedle, 22/51/3 430000865 8010-0467 8010-0456, 700002215
gastight 10/pk
500 Fixedneedle, 22/51/3 430000866 8010-0468 8010-0460, 700002216
gastight 10/pk
1,000 Fixedneedle, 22/51/3 430000867 8010-0443 8010-0455, 700002217
gastight 1/pk
2,500 Fixedneedle, 22/51/3 430000868 8010-0444 8010-0448, 700002218
gastight 1/pk
*Barrelodis6.7mm.Allother10,25,and,100µLsyringeshave7.9mmod.
Thecrossreferencestotheoriginalequipmentmanufacturer(OEM)partnumberslistedhereserveasarecommendationthattheAgilentCrossLab (Continued)
productsareviablealternativestoOEMproducts.CrossLabproductsarecompatiblewiththecorrespondingOEMinstruments,althoughinsome
cases,theCrossLabproductsmayhaveslightlydifferentdesignsascomparedtotheOEMcounterparts.AllCrossLabsuppliesarebackedby
Agilent's90-daymoney-backwarranty.
Long-lifedeuteriumlamp,8005-0705 Long-lifedeuteriumlamp,8005-0704 Long-lifedeuteriumlamp,8005-0702
CrossLabSuppliesforWatersHPLCSystems

Agilent Agilent
similar to Agilent CrossLab CrossLab similar to
Volume needle gauge/ oem CrossLab replacement replacement oem
model (µL) description Length (mm)/tip Part no. syringe needle Plunger Part no.
510HPLCPump 10000 LuerLock Noneedle WAT025559 8005-0414
515HPLCPump
600MultiSolvent
DeliverySystem
CapLCSystem
CapLCXESystem
600MultiSolvent 25 Removable 22s/51/3 WAT033381 8005-0416 8005-0422
DeliverySystem needle,gastight
RheodyneInjector
2690Separations 25 Chem(1/4-28 Noneedle WAT077343 8005-0420
Module UNFscrew
2690DDissolution threads),gastight
SeparationsModule 250 Chem(1/4-28 Noneedle WAT073109 8005-0419
2695Separations screwthreads
Module UNF),gastight
2695DDissolution
SeparationsModule
2790Separations
Module
2795Separations
Module
LCModule1
717/717plus
Autosampler
RheodyneInjector 100 Removable 22s/51/3 WAT033383 8005-0417 8005-0418, 8005-0423
needle,gastight 6/pk
Thecrossreferencestotheoriginalequipmentmanufacturer(OEM)partnumberslistedhereserveasarecommendationthattheAgilentCrossLabproductsareviablealternatives
toOEMproducts.CrossLabproductsarecompatiblewiththecorrespondingOEMinstruments,althoughinsomecases,theCrossLabproductsmayhaveslightlydifferentdesignsas
comparedtotheOEMcounterparts.AllCrossLabsuppliesarebackedbyAgilent's90-daymoney-backwarranty.
Autosamplersyringe,gastight,8005-0417
138
Pump supplies
similar to Agilent
oem CrossLab
model description unit Part no. Part no.
Plungers and seals
2690SeparationsModule Sapphireplungerassembly,standard 1/pk WAT270959 8005-0538
2690DDissolutionSeparationsModule
2695SeparationsModule
2796BioseparationsModule
2690SeparationsModule Plungerseals,clear 2/pk 700001326 8005-0514
2690SeparationsModule Plungersealreplacementkit,standard,yellow 2/pk WAT270938 8005-0535
AllianceGPC/V2000Systems
2690SeparationsModule Plungersealreplacementkit,black 2/pk WAT271066 8005-0541
2690SeparationsModule Facesealsreplacementkit 4/pk WAT270939 8005-0536
2695DDissolution
SeparationsModule
Plungersealreplacementkit, Plungersealreplacementkit, Facesealsreplacementkit,

8005-0535 8005-0541 8005-0536
Pump supplies
similar to Agilent
oem CrossLab
Plungers and seals
2690SeparationsModule Sealwashfacesealkit 1/pk WAT271017 8005-0539
2796BioseparationsModule Sealwash,plungerseal 4/pk 700002258 8005-0516
2796BioseparationsModule Plungerseal,standard 2/pk 700002257 8005-0515
2690SeparationsModule Sealwashplungersealreplacementkit 2/pk WAT271018 8005-0540
510HPLCPump Sapphireplunger 1/pk WAT025656 8005-0527
600MultiSolventDeliverySystem Orientedsapphireplunger 1/pk WAT069511 8005-0533
610PowerLineIsocraticPump
LCModule1
510HPLCPump Plungerseal,graphite-filledPTFE(GFP),black 1/pk WAT026613 8005-0529
515HPLCPump
600MultiSolventDeliverySystem
LCModule1
510HPLCPump Plungerseal,black,225µL 1/pk WAT026644 8005-0530
515HPLCPump
LCModule1
616LCSystem Sapphireplunger 1/pk WAT031788 8005-0531
626LCSystem
1515HPLCPump Sapphireplungerassembly 1/pk WAS207069 8005-0523
1525HPLCPump
515HPLCPump
Thecrossreferencestotheoriginalequipmentmanufacturer(OEM)partnumberslistedhere (Continued)
serveasarecommendationthattheAgilentCrossLabproductsareviablealternativestoOEM
products.CrossLabproductsarecompatiblewiththecorrespondingOEMinstruments,
althoughinsomecases,theCrossLabproductsmayhaveslightlydifferentdesignsas
comparedtotheOEMcounterparts.AllCrossLabsuppliesarebackedbyAgilent's90-day
money-backwarranty.
Sealwashfacesealkit,
8005-0539
140
Pump supplies
similar to Agilent
oem CrossLab
Plungers and seals
1515HPLCPump Plungerseal,clear 1/pk WAT022934 8005-0524
1525HPLCPump Plungerseal,clear 4/pk WAT022946 8005-0525
510HPLCPump
515HPLCPump
LCModule1
Check Valves and Cartridges
2690SeparationsModule Checkvalvecartridgereplacementkit 2/pk WAT270941 8005-0537
626LCSystem Checkvalvecartridge 1/pk WAT024120 8005-0526
1515HPLCPump Checkvalvecartridge 2/pk 700000254 8005-0513
1525HPLCPump
510HPLCPump
515HPLCPump
LCModule1
1525HPLCPump Checkvalvecartridge 1/pk 700002399 8005-0508
515HPLCPump
Pump supplies
similar to Agilent
oem CrossLab
1515HPLCPump Cartridgecheckvalvesystem 2/pk 700000253 8005-0512
1525HPLCPump
515HPLCPump
LCModule1
510HPLCPump Outletcheckvalverebuildkit,225µL 2/pk WAT026014 8005-0528
515HPLCPump
LCModule1
detector supplies
similar to Agilent
oem CrossLab
2996PhotodiodeArrayDetector Cellgasket 2/pk WAT057924 8005-0532
996PhotodiodeArrayDetector
Valve replacement Parts, 1/pk

similar to Agilent
oem CrossLab
2767/2747SampleManager Stator,6port,stainlesssteel 700001560 8005-0601
Column/FluidicsOrganizer
Rheodyne7725(i)Injector Vespelrotorseal,forRheodyne7725(i) WAT055946 8005-0604
626LCSystem Tefzelrotorseal WAT015781 8005-0603
Rheodyne9125Injector
2700SampleManager Rotorseal WAT272615 8005-0605
2707Autosampler Rotorseal 700003851 8005-0602
142
sample Loops, 1/pk

similar to Agilent
oem CrossLab
model Volume (µL) material Part no. Part no.
2690SeparationsModule 100 Stainlesssteel 430001194 8005-0840
2695SeparationsModule 200 Stainlesssteel 430001630 8005-0841
2796BioseparationsModule 20 PEEK 430000782 8005-0838
2796BioseparationsModule 100 PEEK 430000783 8005-0839
2707Autosampler 5 Stainlesssteel 700000683 8005-0843
CapLCSystem
CapLCXESystem
CapLCSystem
CapLCXESystem
CapLCSystem
CapLCXESystem
Performance maintenance Kits

similar to Agilent
oem CrossLab
model description Kit Contents Part no. Part no.
Performance maintenance Kits for separation modules
2690SeparationsModule 2690/95 Contains2sapphireplungers,2sealwash WAT270944 8005-0915
2690DDissolutionSeparationsModule Performance plungersealkits,2plungersealsreplacements
2695SeparationsModule MaintenanceKit kits(standard,yellow),4washtubeseal
2695DDissolutionSeparationsModule replacementkits,1battery,1diffuserassembly,
4facesealreplacementkits,4solventreservoir
filters(10µm),1250µLsyringe,1precolumnfilter
insertassembly,2checkvalvecartridges,
1sealpackrebuildkitwithneedle,1washtube
seal,1sealwashtube,1PTFEwasher,
1filterretainer,1lowerwashsealfrit,
1needlewashfrit,1TFEwasher,1needle
assembly,2injectorseals,1stainlesssteelferrule
1/16in,1compressionscrew
2690SeparationsModule SealPackRebuild Contains1washtubeseal,1sealwashtube, WAT271019 8005-0916
2690DDissolutionSeparationsModule KitWithNeedle 1PTFEwasher,1filterretainer,1lowerwashseal
2695SeparationsModule frit,1needlewashfrit,1TFEwasher,1needle
2695DDissolutionSeparationsModule assembly,2injectorseals,1stainlesssteelferrule
1/16in,1compressionscrew
Performance maintenance Kits for Pumps
515HPLCPump 515Pump Contains2sapphireplungerassemblies, WAT052587 8005-0913
Performance 2plungerseals,1solventreservoirfilter(10µm),
MaintenanceKit 1spargediffuser,4checkvalvecartridges
600MultiSolventDeliverySystem 600Pump Contains2sapphireplungers,2plungerseals, WAT052675 8005-0930
610PowerLineIsocraticPump Performance 4solventreservoirfilters(10µm),4checkvalve
MaintenanceKit cartridges,1referencevalverebuildkit,
1inletmanifoldrebuildkit,4spargediffusers
616LCSystem 616LC Contains2sapphireplungers,1plungersealkit WAT052672 8005-0928
Performance (ultrahighmolecularweightpolyethylene,yellow),
MaintenanceKit 4checkvalvecartridges,4spargediffusers,
4solventreservoirfilters(10µm)
2960/2965PMkit,8005-0915 515pumpPMkit,8005-0913
144

similar to Agilent
oem CrossLab
626LCSystem 626LC Contains2sapphireplungers,2ultrahigh WAT052673 8005-0929
Performance molecularweightpolyethyleneplungerseals
MaintenanceKit (yellow),4solventreservoirfilters(10µm),
4checkvalvecartridges,4spargediffusers
1515HPLCPump 1515Pump Contains2sapphireplungers,2plungerseals, 201000113 8005-0925
Performance 4checkvalvecartridges,1referencevalverebuild
MaintenanceKit kit,1solventreservoirfilter(10µm)
1525HPLCPump 1525Pump Contains4sapphireplungers,4plungerseals, 201000114 8005-0926
Performance 8checkvalvecartridges,1referencevalverebuild
MaintenanceKit kit,2solventreservoirfilters(10µm)
616LCSystem PlungerandWash Containspartsforbothpumpheads,2plunger WAT031790 8005-0912
626LCSystem SealRebuildKit seals,2plungerwashseals,2retainersealO-rings,
6plungerbearings
1515HPLCPump ReferenceValve Contains1diaphragmforcheckvalve,1gasket WAT025746 8005-0911
1525HPLCPump RebuildKit forcheckvalve,1referencevalvebutton
510HPLCPump
515HPLCPump
510HPLCPump OutletCheckValve Contains2ballandseatforoutletcheckvalves, WAT026014 8005-0528
515HPLCPump RebuildKit 2polychlorotrifluoroethylene(PCTFE)inserts,
600MultiSolventDeliverySystem 2stainlesssteelcupfilters(2µm),4largePTFE
610PowerLineIsocraticPump washers,2smallPTFEwashers
LCModule1

similar to Agilent
oem CrossLab
510HPLCPump InletCheckValve Contains2ballandseatforinletcheckvalves, WAT060495 8005-0914
515HPLCPump RebuildKit 2retainergaskets,2TFEwashers,2PTFEwashers,
600MultiSolventDeliverySystem 2PCTFEinserts
LCModule1
Performance maintenance Kits for Autosamplers
717Autosampler 717Autosampler Contains1sealpackreplacementkit,1250µL WAT052669 8005-0927
Performance syringe,1filter(2.3x11.5in),2filters(2x7in)
MaintenanceKit
Performance maintenance Kits for rheodyne Valves
RheodyneInjector,3725(i) Performance Contains1rotorseal(PEEK),1statorface 201000116 8005-0901
MaintenanceKitfor assembly(PEEK),1isolationseal,1needleguide,
Rheodyne3725(i) 1needleportcleaner,15/64inhexkey,
InjectorValves 19/64inhexkey
RheodyneInjector,7010 Performance Contains1isolationseal,1rotorseal(Vespel), 201000117 8005-0902
MaintenanceKitfor 15/64inhexkey,19/64inhexkey
Rheodyne7010
InjectorValves
RheodyneInjector,7125and7126 Performance Contains1rotorseal(Vespel),1statorface 201000118 8005-0903
MaintenanceKitfor assembly(PEEK/ceramic),1isolationseal,
Rheodyne7125 1needleguide,1needleportcleaner,
and7126Injector 15/64inhexkey,19/64inhexkey,instructions
Valves
RheodyneInjector,7725(i) Performance Contains1statorfaceassembly(PEEK/ceramic), 201000119 8005-0904
MaintenanceKitfor 1rotorseal(Vespel),1isolationseal,1needle
Rheodyne7725(i) guide,1needleportcleaner,15/64inhexkey,
InjectorValves 19/64inhexkey,instructions
RheodyneInjector,7750E Performance Contains1statorfaceassembly(PEEK/ceramic), 201000122 8005-0907
MaintenanceKitfor 1rotorseal(Vespel),1isolationseal,
Rheodyne7750 19/64inhexkey,instructions
InjectorValves
Rheodyne7725(i)PMkit,8005-0904
146

similar to Agilent
oem CrossLab
Performance maintenance Kits for rheodyne Valves
RheodyneInjector,7750E-075 Performance Contains1rotorseal(PEEK),1statorfaceseal 201000125 8005-0908
MaintenanceKitfor (PEEK),1isolationseal,19/64inhexkey,
Rheodyne7750E- instructions
075Valves
RheodyneInjector,8125and8126 Performance Contains1statorfaceassembly(PEEK/ceramic), 201000120 8005-0905
MaintenanceKitfor 1rotorseal(PEEK),1isolationseal,1needle
Rheodyne8125 guide,1needleportcleaner,15/64inhexkey,
and8126Injector 19/64inhexkey,instructions
Valve
RheodyneInjector,9125and9126 Performance Contains1statorfaceassembly(PEEK/ceramic), 201000121 8005-0906
MaintenanceKitfor 1rotorseal(Tefzel),1isolationseal,1needle
Rheodyne9125 guide,1needleportcleaner,15/64inhexkey,
and9126Injector 19/64inhexkey,instructions
Valves
toOEMproducts.CrossLabproductsarecompatiblewiththecorrespondingOEMinstruments,althoughinsomecases,theCrossLabproductsmayhaveslightlydifferentdesigns
ascomparedtotheOEMcounterparts.AllCrossLabsuppliesarebackedbyAgilent's90-daymoney-backwarranty.
Rheodyne9125PMkit,8005-0906
hPLC Capillaries, 1/pk

similar to Agilent
id Length oem CrossLab
model From to material od (mm) (mm) (mm) Fittings Part no. Part no.
2690SeparationsModule Pump Autosampler Stainless 1.6 0.23 760 Withfittings, WAT270975 8005-0824
2690DDissolution steel pre-swaged
SeparationsModule onbothends
2695DDissolution
SeparationsModule
2690SeparationsModule Autosampler Column Stainless 1.6 0.23 760 Withfittings, WAT270979 8005-0825
2690DDissolution Thermostat steel pre-swaged
SeparationsModule Valve onbothends
2695DDissolution
SeparationsModule
2695SeparationsModule Autosampler Column PEEK 1.6 0.13 6000 Withfittings, 430000922 8005-0812
2695DDissolution Thermostat non
SeparationsModule Valve pre-swaged
Alliance Column Column Stainless 1.6 0.23 3000 Nofittings WAT026973 8005-0823
ThermostatValve steel
Column Detector
Column Detector
Column Detector
Fittings
Alliance Compressionscrewsandferrules WAT025604 8005-0835*
*Thisfittingisusedwith8005-0823,8005-0826,and8005-0822
Thecrossreferencestotheoriginalequipmentmanufacturer(OEM)partnumberslistedhereserveasarecommendationthattheAgilentCrossLabproductsareviablealternativesto
OEMproducts.CrossLabproductsarecompatiblewiththecorrespondingOEMinstruments,althoughinsomecases,theCrossLabproductsmayhaveslightlydifferentdesignsas
148
hPLC Fittings, Ferrules, and unions

similar to Agilent
oem CrossLab
description unit Part no. Part no.
Compressionscrew,stainlesssteel,1/16inod 10/pk WAT005070 8005-0837
Compressionscrewsandferrules 5/pk WAT025604 8005-0835
Union,stainlesssteel,1/16inod 1/pk WAT097332 8005-0836
Please visit www.agilent.com/chem/CrossLabhPLC for up-to-date info for the growing portfolio
of CrossLab LC Supplies for your non-Agilent HPLC systems.
For Agilent CrossLab Well Plates and Sealing Mats ordering information
please see the General Chromatography catalog (publication # 5991-1059EN)
CrossLab supplies for shimadzu hPLC systems

detector Lamps, 1/pk
similar to Agilent
oem CrossLab
Long-lifedeuteriumlamp,8001-0701 SPD-M10Avp Long-lifedeuteriumlamp,2,000hours 228-34016-00 8001-0701
SPD-M20A Tungstenlamp,1,200hours 228-34410-91 8001-0703
228-34410-00
SPD-20A/AV Long-lifedeuteriumlamp,2,000hours 228-34016-02 8001-0702
SPD-10A/AVvp
SPD-10AV
SPD-20AV Tungstenlamp,1,200hours 670-14602-00 8001-0705
Long-lifedeuteriumlamp,8001-0702
SPD-10AVvp
SPD-10AV
LC-2010 Long-lifedeuteriumlamp,2,000hours 228-37401-00 8001-0704
LC-2010HT
Long-lifedeuteriumlamp,8001-0704

Agilent Agilent
similar to Agilent CrossLab CrossLab
oem CrossLab replacement replacement
model Volume (µL) description Part no. syringe Plunger barrel
SIL-10A 500 Chem(1/4-28UNFscrewthreads),gastight 228-25237-04 8001-0401 8001-0403 8001-0405
SIL-10Ai
SIL-10A 2,500 Chem(1/4-28UNFscrewthreads),gastight 228-25237-06 8001-0402 8001-0406
SIL-10Ai
Autosamplersyringe,8001-0401 Replacementsyringeplunger,500µL,8001-0403
150
CrossLabSuppliesforShimadzuHPLCSystems
Pump supplies, 1/pk

similar to Agilent
oem CrossLab
Plungers and seals
LC-10ADvp Sapphireplunger 228-35601-92 8001-0503
LC-2010(HT) 228-34498-91
LC-20AD Sapphireplunger 228-35601-93 8001-0504
LC-20ADXR
LC-20AB
LC-20AT Sapphireplungerassembly 228-35009-93 8001-0501
LC-2010 Sapphireplungerassembly 228-35281-93 8001-0514
LC-10ATvp Ceramicplungerassembly 228-35009-92 8001-0533
LC-10ADvp Ceramicplungerassembly 228-35601-91 8001-0534
LC-10ADvp Plungerholder 228-35602-91 8001-0515
LC-20AD/20ADxr/AB
LC-30
LC-10AD/ADvp/LC-600/LC-9A Plungerseal,graphite-filledPTFE 228-35146-00 8001-0502 Plungerseal,8001-0502
LC-20AD/AB (GFP)
LC-2010A/C(HT)
LC-10ATvp Plungerseal,graphite-filledPTFE 228-35145-00 8001-0522
SIL-10ADvp (GFP)
SIL-20A/AC
LC-20AT
LC-2010A/C
LC-2010HT
SIL-HT
Thecrossreferencestotheoriginalequipmentmanufacturer(OEM)partnumberslisted (Continued)
hereserveasarecommendationthattheAgilentCrossLabproductsareviablealternatives
toOEMproducts.CrossLabproductsarecompatiblewiththecorrespondingOEM
instruments,althoughinsomecases,theCrossLabproductsmayhaveslightlydifferent
designsascomparedtotheOEMcounterparts.AllCrossLabsuppliesarebacked
byAgilent's90-daymoney-backwarranty.
Pump supplies, 1/pk

similar to Agilent
oem CrossLab
Plungers and seals
LC-20AD/20ABandLC-10ADvp Plungerseal,polyethylene 228-32628-00 8001-0530
LC-10ATvp/10AT/10AS Plungerseal,polyethylene 228-21975-00 8001-0527
LC-10AS/10AT/10ATvp Plungerrinseseal,polyethylene 228-28499-00 8001-0615
LC-20AT Rinseseal 228-35935 8001-0520
LC-20AT Back-upringforringseal 228-35934 8001-0516
LC-20AT Plungersealspacer 228-42700 8001-0510
LC-10AD PTFEdiaphragms,2/pk 228-32784-91 8001-0513
LC-10ADvp
LC-2010
LC-20AD/AB
LC-10AT/ATvp CheckvalveIN 228-32166-91 8001-0528
LC-10ADvp CheckvalveIN 228-39093-92 8001-0535
LC-10ADvp/ATvp CheckvalveOUT 228-34976-91 8001-0532
LC-10ADandLC-600andLC-9A CheckvalveIN 228-33492-91 8001-0531
LC-10AT/ADandLC-600andLC-9A CheckvalveOUT 228-32531-92 8001-0529
LC-20AD/AB XR CheckvalveIN 228-48249-91 8001-0511
228-45557-91
LC-20AD/AB Outletcheckvalve 228-45705-91 8001-0521
LC-10ADvp/ATvp 228-45563-95
LC-2010 Inletvalvecartridge 228-37149-92 8001-0519
LC-2010HT 228-37149-91
LC-2010 Outletcheckvalve 228-37147-93 8001-0506
LC-2010HT 228-37147-92
LC-20AT Primaryinletcheckvalveassembly 228-48249-93 8001-0512
Thecrossreferencestotheoriginalequipmentmanufacturer(OEM)partnumberslistedhereserveasarecommendationthat
theAgilentCrossLabproductsareviablealternativestoOEMproducts.CrossLabproductsarecompatiblewiththe
correspondingOEMinstruments,althoughinsomecases,theCrossLabproductsmayhaveslightlydifferentdesignsas
Looking for Performance Maintenance Kits for Rheodyne Valves?

Please see pages 144-147.
152
Valve replacement Parts, 1/pk

similar to Agilent
oem CrossLab
SiL-10A/10Ai/10AxL Rotor,6-portvalve 228-21217-91 8001-0601
SIL-10ADvp Rotor,6Vassembly,stainlesssteelsurround 228-21217-97 8001-0603
SIL-10A/10Ai Stator,6-portvalve 228-21220-91 8001-0604 Rotor,6-portvalve,8001-0601
SIL-20A/AC Stator,5-portlowpressurevalve(LPV) 228-36917-01 8001-0607
LC-2010
SIL-20A/AC Rotor,PEEK,highpressurevalve(HPV) 228-41310-92 8001-0612
SIL-HT 228-40750-92
LC-2010 Rotor,Vespel,highpressurevalve(HPV) 228-38556-01 8001-0609
SIL-20A/AC HighpressurestatorassemblyforSIL-20A/AC 228-45408-91 8001-0613
LC-2010 Rotor,PEEK,lowpressurevalve(LPV) 228-36923-00 8001-0608
LC-2010HT
SIL-20 Stator,6-portvalve,8001-0604
SIL-HT
LC-10ADvp O-ringfordrainvalve,perfluoroelastomer 670-11518 8001-0614
LC-10ATvp
SIL-10ADvp
LC-20AT
LC-2010/HT
sample Loops, 1/pk

similar to Agilent PEEKrotor,lowpressurevalve(LPV),8001-0608
oem CrossLab
SIL-20A/AC 100 Stainlesssteel 228-45402-91 8001-0814
228-45402-95
SIL-10ADvp 100 Stainlesssteel,extendedfor 228-39751-92 8001-0812
pre-treatment
LC-2010 100 Stainlesssteel 228-41370-91 8001-0809
LD-2010HT 228-37549-91
SIL-HT
100 Stainlesssteel,1/16in 220-90800-20 8001-0801
100 Stainlesssteel,1/8in 220-90800-30 8001-0802
Thecrossreferencestotheoriginalequipmentmanufacturer(OEM)partnumberslistedhereserveasarecommendation
thattheAgilentCrossLabproductsareviablealternativestoOEMproducts.CrossLabproductsarecompatiblewiththe

similar to Agilent
oem CrossLab
LC-20AT Rinsesealholderassembly Contains1rinseseal,1stainlesssteelrinsesealholder,1backupring, 228-35946-92 8001-0517
1perfluoroelastomerO-ringfordrainvalve
Performance maintenance Kits for Valves
SIL-10ADvp StatorassemblyforSIL-10ADvp Contains1ceramicrotor,1stator,1housingCmanifold 228-36730-91 8001-0610
withintermediateplate 228-39349-01
228-39755-91
LC-2010 StatorassemblyforLC-2010 Contains1housingCmanifold(stainlesssteel)packing, 228-40254-91 8001-0509
1stator,andpins

similar to Agilent
od id Length oem CrossLab
model From to material (mm) (mm) (mm) Fittings Part no. Part no.
LC-2010 Autosampler Column Flexiblestainlesssteel 0.6 0.17 200 Nofittings 228-38043-91 8001-0810
SIL-10ADvp Injector Highpressure Flexiblestainlesssteel 0.6 0.13 200 Withfittings, 228-39756-92 8001-8020
valveport#1 nonpre-swaged
SIL-10ADvp Pump Autosampler Stainlesssteel 1.6 0.3 600 Nofittings 228-22306-00 8001-0818
SIL-20A/AC
LC-20AP Stainlesssteel 1.6 0.8 2000 Nofittings 228-49820-00 8001-0821
228-50579-43
LC-20AT Stainlesssteel 1.6 0.3 2000 Nofittings 228-36993-96 8001-0822
LC-20AD 228-50579-91
SIL-10ADvp
154
tubing
similar to Agilent
od id Length oem CrossLab
model description (mm) (mm) (mm) Fittings Part no. Part no.
LC-2010 ETFEtubingforusebetweentheinletblock 1.6 0.8 3000 Nofittings 228-18495-01 8001-0807
LC-20AD andthecheckvalve
LC-2010 FEPtubing 3 1.5 3000 Nofittings 670-10321-05 8001-0823
SIl-20A/AC
SPD-20A/AV PEEKtubing 1.6 0.25 500 Nofittings 670-10324-01 8001-0824
SPD-M20A 228-33376-50

similar to Agilent
oem CrossLab
LC-2010 PTFEferrule,3.0F-T 1/pk 228-12493-00 8001-0803
LC-20AT Stainlesssteelferrule,1.6F 1/pk 228-16000-10 8001-0816
LD-20AD
LC-2010 Flangelessnut,M6 1/pk 228-39999-05 8001-0813
SIL-20A/AC Stainlesssteelmalenut,1.6MN,for1/16intubing 1/pk 228-16001-00 8001-0805
LC-20AT
LC-20AD
SIL-10ADvp Stainlesssteelmalenut,1.6MN,W6(tallerhexportion) 1/pk 228-16001-03 8001-0806
SIL-20A/AC
LC-20AD/AB PEEKmalenut,1.6MN,forplumbinglinebetweeninletblockandcheckvalve 1/pk 228-35403-00 8001-0819
LC-10ADvp
PEEKmalenut,fingertightfor1/16intubing 1/pk 228-18565-84 8001-0817
hPLC in-Line Filters

similar to Agilent
oem CrossLab
LC-2010 Stainlesssteelin-linefilter 1/pk 228-35871-96 8001-0808
LC-20AD/AB/AT 228-35871-94
LC-10ADvp/ATvp
Please visit www.agilent.com/chem/CrossLabhPLC for up-to-date info for the growing portfolio of
CrossLab LC Supplies for your non-Agilent HPLC systems.
156
CrossLab supplies for dionex hPLC systems

detector Lamps, 1/pk
similar to Agilent
oem CrossLab
VWD-3000Series Long-lifedeuteriumlamp,2,000hours 6074.1110 8002-0703
MWD-3000Series
DAD-3000Series
VWD-3000Series Tungstenlamp,2,000hours 6074.2000 8002-0705 Long-lifedeuteriumlamp,8002-0701
MWD-3000Series
DAD-3000Series
UVD-3000 Long-lifedeuteriumlamp,2,000hours 6073.2070 8002-0702
UVD170/340 Long-lifedeuteriumlamp,2,000hours 5053.1204 8002-0701
UVD160/320
PDA-100 Long-lifedeuteriumlamp,2,000hours 939016T 8002-0704
AD-25
PDA-100 Tungstenlamp,5,000hours 056123T 8002-0706
AD-25

Agilent CrossLab Agilent
similar to Agilent replacement needle CrossLab
Volume oem CrossLab (needle gauge/ replacement
model (µL) description Part no. syringe Length (mm)/tip) Plunger
WPS-3000SL 25 Chem(1/4-28UNFscrewthreads),gastight 6822.0001 8002-0405
250 Chem(1/4-28UNFscrewthreads),gastight 6822.0003 8002-0407
ASI-100 100 Removableneedle,gastight 5805.2920 8002-0401* 8002-0413,22/51/3,6/pk 8002-0402
8002-0412,22s/51/3,6/pk
1,000 Removableneedle,gastight 5805.2940 8002-0403* 8002-0414,22/51/3,6/pk 8002-0406
8002-0415,22s/51/3,6/pk
2,500 Removableneedle,gastight 5805.2950 8002-0404* 8002-0414,22/51/3,6/pk 8002-0408
8002-0415,22s/51/3,6/pk
*Needlesaresoldseparately
Chem(1/4-28UNFscrewthreads),gastight, Removableneedle,gastight,8002-0401
8002-0405
CrossLabSuppliesforDionexHPLCSystems
Autosampler supplies
similar to
od id Length Volume oem
model material (mm) (mm) (mm) (µL) Fittings Part no. Part no.
needle seat Capillaries, 1/pk
WPS-3000SL Stainlesssteel 0.8 0.12 120 1.35 Withfittings, 6820.2407 8002-0808
nonpre-swaged
WPS-3000SL Stainlesssteel 0.8 0.18 120 3.1 Withfittings, 6820.2408 8002-0809
nonpre-swaged
WPS-3000SLSemiprep Stainlesssteel 0.8 0.5 120 24 Withfittings, 6820.2409 8002-0810
nonpre-swaged
Pump supplies
similar to Agilent
oem CrossLab
Pistons and seals
ISO-3100A Piston,sapphire 1/pk 6035.2240 8002-0515
LPG-3400A
LPG-3400AB
LPG-3400M
LPG-3400MB
DGP-3600A
DGP-3600AB
DGP-3600M
DGP-3600MB
HPG-3x00A
HPG-3x00M
ISO-3100SD Pistonseal,reversed-phase 2/pk 6040.0304 8002-0502
LPG-3400SD
LPG-3400RS
DGP-3400SD
DGP-3600RS
HPG-3x00SD
HPG-3x00RS
ISO-3100SD Supportringforpistonsseals 2/pk 6040.0012 8002-0501
LPG-3400SD
LPG-3400RS
DGP-3400SD
DGP-3600RS
HPG-3x00SD
HPG-3x00RS
UltiMate3000pumpseries Ringseal,DR-8,PTFE 10/pk 2266.0082 8002-0601
158
Pump supplies
similar to Agilent
oem CrossLab
UltiMate3000RSpumps, Checkvalvecartridge,ceramic 1/pk 6041.2301 8002-0517
optionalforSDandBMpumps
ISO-3100A Checkvalvecartridge,sapphire,biocompatible 1/pk 6035.2300 8002-0516
LPG-3400A
LPG-3400M
LPG-3400MB
LPG-3400AB
DGP-3600A
DGP-3600M
DGP-3600MB
DGP-3600AB
HPG-3x00A
HPG-3x00M
HPG-3200P
Valve replacement Parts

similar to Agilent
oem CrossLab
FLM-3x00 Rotorseal,proprietaryinertpolymercomposite, 1/pk 6720.0110 8002-0607
2-position10-portC2switchingvalve(standard)
FLM-3x00 Rotorseal,polyaryletherketone/PTFEcomposite, 1/pk 6720.0092 8002-0605
2-position10-portC2switchingvalve(biocompatible)
FLM-3x00 Stator,stainlesssteel,2-position10-portC2switchingvalve(standard) 1/pk 6720.0111 8002-0608
ASI-100 Tefzelrotorseal 1/pk 709.7010.071 8002-0604
ASI-100 Vespelrotorseal 1/pk 709.7010.039 8002-0602
Rheodyneinjectors
ASI-100 Stainlesssteelstator 1/pk 709.7010.040 8002-0603
Rheodyneinjectors
Vespelrotorseal,8002-0602 Stainlesssteelstator,8002-0603
sample Loops, 1/pk

similar to Agilent
oem CrossLab
model description Volume (µL) material Part no. Part no.
ASI-100series For100µLsyringe 100 Stainlesssteel 5810.3012 8002-0859
ASI-100 For250µLsyringe 150 Stainlesssteel 5810.3003 8002-0856
ASI-100T
ASI-100series For1000µLsyringe 1000 Stainlesssteel 5810.3010 8002-0857
ASI-100P For250µLsyringe 2500 Stainlesssteel 5810.3011 8002-0858
ASI-100PT
buffer Loops, 1/pk

similar to Agilent
oem CrossLab
WPS-3000SLAnalytical 100 Stainlesssteel 6820.2413 8002-0860
WPS-3000RS
WPS-3000SLSemiprep >250 Stainlesssteel 6820.2421 8002-0811
Looking for Performance Maintenance Kits for Rheodyne Valves?

Please see pages 144-147.
160

similar to Agilent
oem CrossLab
ISO-3100SD PerformanceMaintenanceKit Contains1solventlinefilterholder,1stainlesssteel 6040.1950 8002-0907
forISO-3100SDpump solventlinefilterfrit(Porosity:10µm),1siliconetubing
(2.80mmodx1.30mmidx1.5mL),1PharMedtubing
forperistalticpump(3.2mmodx1.6mmidx180mmL),
3tubeconnectorsfor1.0-2.0mmidtubing,4pistonseals
(reversed-phase),2supportrings,1PTFEO-ringseal
(9mmx1.5mm)forsealwashsystem,1PTFEO-ringseal
(32mmx1.5mm)forsealwashsystem,1checkvalvecartridge
(sapphire),1capsealforpurgevalveknob
ISO-3100BM PerformanceMaintenanceKit Contains1solventlinefilterholder,1PEEKsolventline 6042.1950 8002-0917
forISO-3100BMpump filterfrit(Porosity:10µm),1siliconetubing
(reversed-phase,biocompatible),2supportrings,1PTFEO-ring
seal(9mmx1.5mm)forsealwashsystem,1PTFEO-ringseal
LPG-3400SD PerformanceMaintenanceKit Contains4solventlinefilterholders,4stainlesssteel 6040.1951 8002-0908
forLPG-3400SDpump solventlinefilterfrits(Porosity:10µm),1siliconetubing
(reversed-phase),2supportrings,1PTFEO-ringseal
(9mmx1.5mm)forsealwashsystem,1PTFEO-ringseal
LPG-3400RS PerformanceMaintenanceKit Contains4solventlinefilterholders,4stainlesssteel 6040.1954 8002-0911
forLPG-3400RSpump solventlinefilterfrits(Porosity:10µm),1siliconetubing
(reversed-phase),1PTFEO-ringseal(9mmx1.5mm)
forsealwashsystem,1PTFEO-ringseal(32mmx1.5mm)
forsealwashsystem,1checkvalvecartridge(ceramic),
1capsealforpurgevalveknob

similar to Agilent
oem CrossLab
LPG-3400BM PerformanceMaintenanceKit Contains4solventlinefilterholders,4PEEKsolventlinefilterfrits 6042.1951 8002-0918
forLPG-3400BMpump (Porosity:10µm),1siliconetubing(2.80mmodx1.30mmidx
1.5mL),1PharMedtubingforperistalticpump(3.2mmodx1.6
mmidx180mmL),3tubeconnectorsfor1.0-2.0mmidtubing,
4pistonseals(reversed-phase,biocompatible),2supportrings,1
PTFEO-ringseal(9mmx1.5mm)forsealwashsystem,1PTFE
O-ringseal(32mmx1.5mm)forsealwashsystem,1titanium
inlinefilterfrit(Porosity:2µm),1checkvalvecartridge(sapphire),
1capsealforpurgevalveknob
DGP-3600SD PerformanceMaintenanceKit Contains6solventlinefilterholders,6stainlesssteelsolventline 6040.1952 8002-0909
forDGP-3600SDpump filterfrits(Porosity:10µm),1siliconetubing(2.80mmodx1.30
mmidx1.5mL),1PharMedtubingforperistalticpump(3.2mm
odx1.6mmidx180mmL),5tubeconnectorsfor1.0-2.0mmid
tubing,8pistonseals(reversed-phase),4supportrings,2PTFEO-
ringseals(9mmx1.5mm)forsealwashsystem,2PTFEO-ring
seals(32mmx1.5mm)forsealwashsystem,2checkvalve
cartridges(sapphire),2capsealsforpurgevalveknob
DGP-3600RS PerformanceMaintenanceKit Contains6solventlinefilterholders,6stainlesssteelsolventline 6040.1955 8002-0912
forDGP-3600RSpump filterfrits(Porosity:10µm),1siliconetubing(2.80mmodx1.30
tubing,8pistonseals(reversed-phase),2PTFEO-ringseals(9
mmx1.5mm)forsealwashsystem,2PTFEO-ringseals(32mm
x1.5mm)forsealwashsystem,2checkvalvecartridges
(ceramic),2capsealsforpurgevalveknob
DGP-3600BM PerformanceMaintenanceKit Contains6solventlinefilterholders,6PEEKsolventlinefilterfrits 6042.1952 8002-0919
forDGP-3600BMpump (Porosity:10µm),1siliconetubing(2.80mmodx1.3mmidx
1.5mL),1PharMedtubingforperistalticpump(3.2mmodx1.6
mmidx180mmL),5tubeconnectorsfor1.0-2.0mmidtubing,
8pistonseals(reversed-phase,biocompatible),4supportrings,2
PTFEO-ringseals(9mmx1.5mm)forsealwashsystem,2PTFE
O-ringseals(32mmx1.5mm)forsealwashsystem,2titanium
inlinefilterfrits(Porosity:2µm),2checkvalvecartridges
(sapphire),2capsealsforpurgevalveknob
HPG-3x00SD PerformanceMaintenanceKit Contains4solventlinefilterholders,4stainlesssteelsolventline 6040.1953 8002-0910
forHPG-3x00SDpump filterfrits(Porosity:10µm),1siliconetubing(2.80mmodx1.30
tubing,8pistonseals(reversed-phase),4supportrings,2PTFEO-
ringseals(9mmx1.5mm)forsealwashsystem,2PTFEO-ring
seals(32mmx1.5mm)forsealwashsystem,2checkvalve
cartridges(sapphire),1capsealforpurgevalveknob
162

similar to Agilent
oem CrossLab
HPG-3x00RS PerformanceMaintenanceKit Contains4solventlinefilterholders,4stainlesssteelsolventline 6040.1956 8002-0913
forHPG-3x00RSpump filterfrits(Porosity:10µm),1siliconetubing(2.80mmodx1.30
tubing,8pistonseals(reversed-phase),2PTFEO-ringseals(9
mmx1.5mm)forsealwashsystem,2PTFEO-ringseals(32mm
x1.5mm)forsealwashsystem,2checkvalvecartridges
(ceramic),1capsealforpurgevalveknob
ISO-3100A PerformanceMaintenanceKit Contains2solventlinefilterholders,1stirrer,1ECTFEtubing 6035.1961 8002-0904
LPG-3400AandM forUltiMate3000pumpswith (1.60mmodx0.75mmidx1mL),1siliconetubing(2.80mm
DGP-3600AandM floatingpistons odx1.30mmidx1.5mL),1PharMedtubingforperistaltic
HPG-3x00AandM pump(3.2mmodx1.6mmidx180mmL),2fittings(for1/8in
odtubing,PEEK),2solventlinelockingrings(PEEK),2solventline
supportflanges(PEEK),2knurledheadscrews(1/4in-28for
ferrule1/16in,PEEK),1tubeconnectorfor1.0-2.0mmidtubing,
2ferrules(1/16infor1/4in-28headscrew,PEEK),4ringseals
(DR-8),8pistonseals(reversed-phase),2mixingchamber
gaskets,4O-rings(22mmx2mm,silicone),4pistons(sapphire),
4inlinefilterfrits(stainlesssteel;porosity:0.5µm),4inlinefilter
frits(stainlesssteel;porosity:10µm),8solventlinefilterfrits
(stainlesssteel;porosity:10µm),2pistonsupporthemispheres,4
supportrings,2microflowringseals,and4checkvalve
cartridges(sapphire)
LPG-3400ABandMB PerformanceMaintenanceKit Contains1ECTFEtubing(1.6mmodx0.75mmidx1mL),1 6035.1963 8002-0906
DGP-3600ABandMB forUltiMate3000pumpswith siliconetubing(2.80mmodx1.30mmidx1.5mL),1PharMed
floatingpistons, tubingforperistalticpump(3.2mmodx1.6mmidx180mmL),
Biocompatible 2PEEKfittingsfor1/8inodtubing,2solventlinelockingrings
(PEEK),2solventlinesupportflanges(PEEK),2knurledhead
screws(1/4in-28forferrule1/16in,PEEK),1tubeconnectorfor
1.0-2.0mmidtubing,2ferrules(1/16infor1/4in-28head
screw,PEEK),4ringseals(DR-8),8pistonseals(reversed-phase),
4O-rings(22mmx2mm,silicone),4pistons(sapphire),4inline
filterfrits(titanium;Porosity:10µm),4inlinefilerfrits(PEEK;
Porosity:0.5µm),2solventlinefilterholders,6solventlinefilter
frits(titanium;Porosity:10µm),2pistonsupporthemispheres,4
supportrings,2microflowringseals,4checkvalvecartridges
(sapphire),and2mixingchambergaskets

similar to Agilent
oem CrossLab
HPG-3200P PerformanceMaintenanceKit Contains1stirrer,1siliconetubing 6035.1962 8002-0905
forHPG-3200Ppump (2.80mmodx1.30mmidx1.5mL),1PharMedtubing
1FEPtubing(4.5mmodx3.0mmidx2mL),
1tubeconnectorfor1.0-2.0mmidtubing,2tubeadaptors
(3.0mmid1/4in-28),4ringseals(DR-8),8pistonseals
(reversed-phase,semipreparative),2mixingchambergaskets,
4ceramicpistons(semipreparative),4stainesssteelinlinefilter
frits(Porosity:10µm),2stainlesssteelsolventlinefilters
(Porosity:10µm),4supportrings(semipreparative),
4checkvalvecartridges(sapphire)
ISO-3100A Pistonseal/supportringkit, Contains1supportringand2pistonseals 6025.2010A 8002-0923
LPG-3400AandM reversed-phase
DGP-3600AandM
HPG-3x00AandM
LPG-3400AB Pistonseal/supportringkit, Contains1supportringand2pistonseals 6025.2012 8002-0901
LPG-3400MB reversed-phase,
DGP-3600AB biocompatible
DGP-3600MB
ISO-3100BM
LPG-3400BM
DPG-3600BM
HPG-3200P Pistonseal/supportringkit, Contains1supportringand2pistonseals 6030.9010 8002-0902
P680 reversed-phase,
semipreparative
HPG-3200P Pistonseal/supportringkit, Contains1supportringand2pistonseals 6030.9011 8002-0903
P680 normalphase,
semipreparative
ISO-3100A Pistonseal/supportringkit, Contains1supportringand2pistonseals 6025.2011A 8002-0924
LPG-3400A normalphase
LPG-3400M
DGP-3600A
DGP-3600M
HPG-3x00A
HPG-3x00M
ISO-3100SD
LPG-3400SD
DGP-3600SD
HPG-3x00SD
164

similar to Agilent
oem CrossLab
ISO-3100SD PTFEsealkitforrearseal Contains5PTFEO-ringseals9mmx1.5mm,5PTFEO-ringseals 6040.2208 8002-0915
ISO-3100BM washsystem 32mmx1.5mm
LPG-3400SD
LPG-3400BM
LPG-3400RS
DGP-3600SD
DGP-3600BM
DGP-3600RS
HPG-3x00SD
HPG-3x00RS
HPG-3200BX
ISO-3100SD TubingKitforRearSealWash Contains1siliconetubing(2.80mmodx1.30mmidx1.5mL), 6040.9502 8002-0916
ISO-3100BM System 1PharMedtubingforperistalticpump
LGP-3400SD (3.2mmodx1.6mmidx180mmL),7tubeconnectors
LGP-3400RS for1.0-2.0mmidtubing
LGP-3400BM
DGP-3600SD
DGP-3600RS
DGP-3600BM
HPG-3x00SD
HPG-3x00RS
Performance maintenance Kits for Autosamplers
WPS-3000TBSL RotorSealandStatorFace Contains1rotorsealand1statorface 6722.9014 8002-0611
Autosampler SealKit
WPS-3000SL RotorSealKit Contains2PEEKrotorseals,19/64inhexkey,instructions 6840.0012 8002-0610
WPS-3000RS

similar to Agilent
UltiMate3000RS Pump Autosampler Flexible 0.6 0.13 450 Withfittings, 6040.2345 8002-0822
stainlesssteel nonpre-swaged
UltiMate3000SD Pump Autosampler Flexible 0.6 0.18 450 Withfittings, 6040.2365 8002-0824
UltiMate3000RS Autosampler Column Flexible 0.6 0.13 350 Withfittings, 6040.2335 8002-0821
Thermostat stainlesssteel nonpre-swaged
Valve
UltiMate3000SD Autosampler Column Flexible 0.6 0.18 350 Withfittings, 6040.2375 8002-0825
Valve
UltiMate3000 Autosampler Column Stainlesssteel 1.6 0.23 340 Withfittings, 6820.2418 8002-0837
Thermostat nonpre-swaged
Valve
UltiMate3000RS Column Column Flexible 0.6 0.13 550 Withfittings, 6040.2305 8002-0818
Valve
UltiMate3000RS Pump Autosampler Flexible 0.6 0.18 550 Withfittings, 6040.2355 8002-0823
UltiMate3000SD Column Column stainlesssteel nonpre-swaged
Thermostat
Valve
UltiMate3000RS Column Detector Flexible 0.6 0.13 250 Withfittings, 6040.2325 8002-0820
UltiMate3000SD Column Detector Flexible 0.6 0.18 250 Withfittings, 6040.2385 8002-0826
UltiMate3000 Column Detector Stainlesssteel 1.6 0.13 250 Withfittings, 6074.2410 8002-0833
nonpre-swaged
UltiMate3000 Column Detector PEEK 1.6 0.13 250 Withfittings, 6074.2415 8002-0834
nonpre-swaged
UltiMate3000 Column Detector Stainlesssteel 1.6 0.23 250 Withfittings, 6074.2400 8002-0831
nonpre-swaged
UltiMate3000 Column Detector PEEK 1.6 0.25 250 Withfittings, 6074.2405 8002-0832
nonpre-swaged
UltiMate3000RS Flexible 0.6 0.13 150 Withfittings, 6040.2315 8002-0819
166

similar to Agilent
VWD-3100 PEEK 1.6 0.25 2000 Nofittings 6251.6001 8002-0835
VWD-3100RS
VWD-3400
VWD-3400RS
DAD-3000
DAD-3000RS
MWD-3000
MWD-3000RS
ISO-3100BM
LPG-3400AB
LPG-3400MB
LPG-3400BM
DPG-3600AB
DPG-3600MB
DPG-3600BM
SummitP680 Pump Autosampler Stainlesssteel 1.6 0.508 178 Withfittings, 5030.3020 8002-0816
nonpre-swaged
SummitASI-100 Autosampler Column Stainlesssteel Withfittings, 6000.0020 8002-0817*
nonpre-swaged
UVD170U Column Detector PEEK 1.6 0.5 1000 Nofittings 2251.6002 8002-0815
UVD340U
*CrossLabcapillaryandfittingkit,forASI-100Autosampler,contains1stainlesssteelcapillary(0.7mmidx1m),2stainlesssteelcapillaries(0.25mmidx2m),
1510-32UNFstainlesssteelfittings,510-32UNFstainlesssteellongfittings,310-32UNFstainlesssteelextralongfittings,15stainlesssteelferrules1/16in,
and8stainlesssteellongferrules1/16in
tubing
similar to Agilent
oem CrossLab
model description od (mm) id (mm) Length (mm) Fittings Part no. Part no.
LPG-3x00peristalticpump PharMedbiocompatibletubing 3.2 1.6 180 Nofittings 6000.5000 8002-0803

similar to Agilent
oem CrossLab
UltiMate3000Series Blindnut,FS-8biocompatible 1/pk 6000.0144 8002-0802
6000.0044
WPS-3000(T)SL Ferruleandfittingkit,contains6ferrules 6822.0011 8002-0921
WPS-3000(T)SLSemiprep and6longfittingscrews
WPS-3000(T)RS
hPLC in-Line Filters

similar to Agilent
oem CrossLab
LPG-3400BM In-linefilter,10µL 1/pk 6042.5014 8002-0805
DGP-3600BM
LPG-3400BM Filterfritfortitaniumin-linefilter,2µL 1/pk 6268.0036 8002-0806
DGP-3600BM
Please visit www.agilent.com/chem/CrossLabhPLC for up-to-date info for the growing portfolio of CrossLab LC
Supplies for your non-Agilent HPLC systems.
168
CrossLab supplies for CtC Analytics hPLC Autosamplers

Agilent'sCrossLabportfolioincludesavarietyofsyringescompatiblewithCTCAnalyticsHPLCHTSandHTCPALsystems.
Autosampler syringes for CtC hts and htC PAL, 1/pk

Agilent Agilent CrossLab
CrossLab replacement
Volume (µL) description needle gauge/Length (mm)/tip syringe Plunger
10 Fixedneedle 22s/51/3 8010-0440*
Fixedneedle,gastight 22s/51/3 8010-0445* 8010-0457,10/pk
25 Fixedneedle,gastight 22s/51/3 8010-0441 8010-0458,10/pk
Fixedneedle,gastight 22s/51/3 8010-0449* 8010-0450,10/pk
100 Fixedneedle,gastight 22s/51/3 8010-0442* 8010-0459,10/pk
Fixedneedle,gastight 22/51/3 8010-0446* 8010-0459,10/pk
250 Fixedneedle,gastight 22/51/3 8010-0467 8010-0456,10/pk
500 Fixedneedle,gastight 22/51/3 8010-0468 8010-0460,10/pk
1.0mL Fixedneedle,gastight 22/51/3 8010-0443 8010-0455,1/pk
2.5mL Fixedneedle,gastight 22/51/3 8010-0444 8010-0448,1/pk
*Barrelodis6.7mm.Allother10,25,and,100µLsyringeshave7.9mmod.
CE and CE/MS
CE and CE/MS
CE Solutions Kits
Agilent continues to introduce new CE solutions kits designed to simplify many of your applications:
• Inorganic anions
• Cations
• Organic acids
• Forensic anions
• µPage
These kits include all you need to begin your CE analyses, including buffers, capillaries, conditioning
solutions, test samples, methods and detailed descriptions. Each kit is designed to take advantage of
the automation of the Agilent CE system to make your time in the laboratory more efficient. All kits are
prepared using the same quality procedures as our buffers and are thoroughly tested and supported.
While the kits have been optimized for use with the Agilent CE system, they may be used with virtually
any commercial or home-built CE system.
170
CE and CE/MS
Inorganic anion Solutions Kit

The Inorganic Anion Solutions Kit contains all components needed for the analysis of common inorganic
anions such as chloride, bromide, iodide, fluoride, sulfate, and phosphate. Applications include the analysis
of inorganic ions in:
• Ultra pure water

• Waste water Inorganic anion solutions kit, 5063-6511
• High purity chemicals
• Drug formulations
• Pulp and paper solutions
• Semiconductor solutions
Using an indirect UV detection system optimized for small anions, analyses are sensitive and rapid, and
provide an alternative to traditional ion chromatography. The kit contains buffer, capillaries, test mixture,
and instructions.
www.agIlEnt.CoM/ChEM/lC 171
CE and CE/MS
Inorganic anion Solutions Kit

description Unit Part no.
Inorganic Anion Solutions Kit 5063-6511
Inorganic anion buffer 250 mL 8500-6797
Ultra pure CE water 500 mL 5062-8578
0.1 N sodium hydroxide 250 mL 5062-8575
Inorganic anion solutions kit, 5063-6511 1.0 N sodium hydroxide 250 mL 5062-8576
Bare fused-silica capillary, 50 µm id, 72 cm long 2/pk G1600-62211
Inorganic anion test mixture 10 mL 5062-8524
Includes 1000 ppm each of fluoride, chloride, bromide, nitrite, sulfate
and 2000 ppm phosphate
note: The following part should be ordered separately for use with the Agilent CE System:
Alignment interface for standard 50 µm id capillary (P/N G1600-60210) for 1600 HP3D CE
Alignment interface for standard 50 µm id capillary (P/N G7100-60210) for 7100 CE
1. Thiosulfate
Ultra pure CE water, 5062-8578 2. Bromide
3. Iodide
4. Chloride
5. Sulfate
6. Nitrite
7. Nitrate
8. Molybdate (VI)
9. Azide
10. Thiocyanate
11. Chlorate
12. Fluoride
0.1 N sodium hydroxide, 5062-8575

Separation of common anions
Inorganic anion test mixture, 5062-8524
172
CE and CE/MS
Cation Solutions Kit

The Cation Solutions Kit provides everything you need for the analysis of inorganic and low-molecular-mass
organic cations. It is specially designed for the separation of alkali metal ions, alkaline-earth metal ions and
alkyl amines in a wide range of matrices.
Each kit contains a cation buffer, bare fused silica capillaries, cation standard, CE grade water and a
detailed description of the analysis method and most common applications, including detection limits and
reproducibility data. The Cation Solutions Kit and the separation methods were developed to fit perfectly
with the Agilent CE system and to support its high automation capabilities. The methods are very easy to
perform and provide accurate and quantitative analyses.
Cation Solutions Kit

Column description Unit Part no.
Cation Solutions Kit 5064-8206
Cation buffer 250 mL 5064-8203
Bare fused silica capillary, extended light path bubble factor (3), 50 µm id, 2/pk G1600-61232
56 cm long
Cation test mixture 25 mL 5064-8205
Alignment interface for 50 µm id extended light path capillary (P/N G1600-60230) for 1600 HP3D CE
Alignment interface for 50 µm id extended light path capillary (P/N G7100-60230) for 7100 CE
1. Ammonium
2. Potassium
3. Sodium
4. Calcium
5. Magnesium
Coffee
A Energy drink
B
C
C
Cation standard Cation standard
Cations in coffee and energy drinks
CE and CE/MS
organic acids Solutions Kit

The Organic Acids Solutions Kit is ideal for the analysis of short alkyl chain carboxylic acids. Employing an
indirect UV detection agent optimized for organic acids, the methodology is simple, sensitive, and provides
accurate quantitative analysis. Suited for the analysis of organic acids in a wide range of matrices, it is
especially useful for determination of organic acids in beverages and food.
organic acids Solutions Kit

Organic Acids Solutions Kit 5063-6510
Organic acids buffer 250 mL 8500-6785
1.0 N sodium hydroxide 250 mL 5062-8576
Organic acids test mixture 20 mL 8500-6900
Includes 1000 ppm each of malate, succinate, and lactate
Note: The following part should be ordered separately for use with the Agilent CE System:
Alignment interface for 75 µm id capillary (P/N G1600-60310) for 1600 HP3D CE
Alignment interface for 75 µm id capillary (P/N G7100-60310) for 7100 CE
anions in beer anions in red wine
1. Chloride 1. Chloride
11 2. Sulfate 2. Sulfate
3. Oxalate
3 3. Tartarate
10 4. Formate 4. Malate
6 5. Malate 5. Citrate
2 6. Citrate 8 6. Succinate
9 7. Succinate
6 7. Pyruvate
5 7 4 7
1 12 8. Pyruvate 8. Acetate
8 2 5 9
9. Acetate 9. Lactate
3 4 1
10. Lactate
11. Phosphate
12. Pyroglutamate
Organic acids in beer and red wine
174
CE and CE/MS
Forensic anions Solutions Kit

This highly focused kit was developed specifically for the analysis of poisonous compounds, such as cyanide,
azide, selenate, arsenate, and arsenite. In cases of poisoning, analytical tools are needed to determine the
identity of toxins quickly and accurately. A rapid determination of anionic toxins in adulterated foods and
beverages is possible using CE with indirect UV detection. Forensic and other anions can be detected within
15 minutes with minimal sample preparation.
Forensic anions Solutions Kit

Forensic Anions Solutions Kit 5 x 50 mL 5064-8208
Basic anion buffer 50 mL 5064-8209
Inorganic anion test mixture 10 mL 5062-8524
Includes 1000 ppm each of fluoride, chloride, bromide, nitrite, sulfate
and 2000 ppm phosphate
Alignment interface for standard 50 µm id capillary (P/N G1600-60210) for 1600 HP3D CE
Alignment interface for standard 50 µm id capillary (P/N G7100-60210) for 7100 CE
1. Cyanide
2. Chloride
3. Nitrite
4. Nitrate
9 5. Sulfate
10 6. Azide
11 7. Selenate
8 13 8. Carbonate
12
12 67 14
15 9. Fluoride
3 5 10. Arsenate
4
11. Phosphate
12. Glutamate
13. Acetate
14. Arsenite
15. Lactate
Analysis of an anion standard with the Forensic Anions Solutions Kit
CE and CE/MS
µPagE Solution Kits

µPAGE poly-acrylamide gel-filled capillaries are the most direct vehicles to transfer all of your applications
from slab gel to CE, utlizing the automation, high speed, high resolution, and quantitative advantages of CE.
The capillaries are ideal for high resolution separations of oligonucleotides, single-stranded and
double-stranded DNA fragments, polymerase chain reaction (PCR) products, sequencing reaction
products and oligosaccharides.
µPAGE capillaries are available in three different pore sizes. The size of the molecular sieving pores is
controlled by the monomer concentration (%T) and the degree of polymer cross-linking (%C). Gels with
higher %T and %C values have smaller pores and are, therefore, more effective at resolving smaller
molecules. µPAGE-10 (10%T, 0%C) capillaries provide high resolution capabilities for separation of
antisense therapeutic agents, primers and probes, as well as nucleotides.
µPAGE-5 (5%T, 5%C) allows single base resolution of oligonucleotides [pd(A)] ranging from
20 to 150 bases.
For your convenience, µPAGE capillaries and µPAGE buffers can be purchased together or
separately. To achieve the highest reproducibility and provide optimal longevity, use µPAGE buffer
with µPAGE capillaries.
µPagE Starter Kits

Includes 3 µPAGE capillaries, 75 cm total length, 50 cm effective length, oligonucleotide standard
and µPAGE buffer
Kit as defined by type of µPagE capillary Id (µm) Part no.
µPAGE-10 (10%T, 0%C) 100 192-1311
µPAGE pd(A)25-30 oligonucleotide standard for µPAGE-10 kit
µPAGE buffer, 2 x 237 mL
µPAGE-5 (5%T, 5%C) 75 192-5211
µPAGE pd(A)25-30, 40-60 oligonucleotide standard for µPAGE-3 and µPAGE-5 kits
µPAGE-3 (3%T, 3%C) 75 192-3211
176
CE and CE/MS
µPagE Basic Kits

Includes 3 µPAGE capillaries, 75 cm total length, 50 cm effective length
Kit as defined by type of µPagE capillary Id (µm) Part no.
µPAGE-10 (10%T, 0%C) 100 191-1311
µPAGE pd(A)25-30 oligonucleotide standard for µPAGE-10 kit
µPAGE-5 (5%T, 5%C) 75 191-5211
µPAGE-3 (3%T, 3%C) 75 191-3211
note: The µPAGE capillaries are not pre-aligned for the G1600A CE and G7100 CE systems. To cut them to the correct length,
use the CE column cutter (P/N 5183-4669). To create detection window, use the Window Etching Tool (P/N 590-3003).
µPagE Buffer Solutions and oligo Standards

Kit as defined by type of µPagE capillary Part no.
µPAGE tris-borate and urea buffer for µPAGE-10, 4 x 237 mL 590-4005
µPAGE tris-borate and urea buffer for µPAGE-3 and µPAGE-5, 4 x 237 mL 590-4001
µPAGE pd(A)25-30, 40-60 oligonucleotide standard for µPAGE-3 and µPAGE-5, 3 x 50 µL 590-4000
Single base pair separation of pd(a) Secondary peaks of identical base

on a 3%t, 3%C µPagE capillary length as the primary peaks,
but retarded in electromigration
due to loss of the terminal 5'
phosphate group
Oligonucleotide samples with or without terminal 5 phosphate group
CE and CE/MS
CE and CE/MS Capillaries

Standard Bare Fused-Silica Capillaries
Fused-silica capillaries are the heart of CE. Pre-aligned capillaries from Agilent Technologies are designed
and optimized for ease of use and reliability. All capillary ends are cut to a smooth, mirror-like finish. In
addition, the polyimide outer coating is removed from the ends. These processes ensure minimal sample
adsorption and help maintain sharp peak shapes. All capillaries have a pre-made detection "window"
and a built-in alignment stopper that allows rapid and precise insertion in the alignment interface.
CZE of a tryptic digest of recombinant human growth hormone using a standard fused-silica capillary
with 75 µm internal diameter
Standard Bare Fused-Silica Capillaries, 2/pk

Id (µm) total length (cm) Effective length (cm) Color Code Part no.
50 33 24.5 Green G1600-63211
48.5 40 Green G1600-60211
64.5 56 Green G1600-61211
80.5 72 Green G1600-62211
112.5 104 Green G1600-64211
75 33 24.5 Blue G1600-63311
48.5 40 Blue G1600-60311
tIPS & toolS 64.5 56 Blue G1600-61311
80.5 72 Blue G1600-62311
Different inner diameters of capillaries 112.5 104 Blue G1600-64311
need to use different alignment 100 33 24.5 Gray G1600-63411
interfaces to guarantee optimal
48.5 40 Gray G1600-60411
detection. The color coding of the
capillary and the alignment interface 64.5 56 Gray G1600-61411
allow you to easily match the correct 80.5 72 Gray G1600-62411
interface with the capillary. 112.5 104 Gray G1600-64411
178
CE and CE/MS
Extended light Path (Bubble Cell) Bare

Fused-Silica Capillaries
Use Agilent Technologies extended light path capillaries ("bubble" cell capillaries) to improve sensitivity
3- to 5-fold over standard capillaries. With extended light path capillaries, the inner diameter is increased
only at the detection window, offering the sensitivity of a wide inner diameter capillary and the low current
generation of a narrow one.
Resolution is not sacrificed when used with matching optical alignment interfaces from Agilent.
Through a computer-controlled proprietary process, the diameter is increased three to five times, with a Electroosmotic flow maintains the "plug" flow in
manufacturing precision better than 3%. Take advantage of this process to extend the detection pathlength the bubble. Optical slits matched to the zone
geometry maintain resolution.
of 25 µm id capillaries to 125 µm, 50 µm to 150 µm, and 75 µm to 200 µm.
25 µm with 125 µm bubble
25 µm standard capillary
Analysis of cold medicine ingredients in a standard capillary (25 µm id) and an Agilent Extended Light Path Capillary
tIPS & toolS
Use narrow 25 and 50 µm id "bubble"

cell capillaries for highly conductive
buffers without sacrificing sensitivity.
CE and CE/MS
Extended light Path (Bubble Cell) Bare Fused-Silica Capillaries, 2/pk

Effective Bubble optical Path Color
Id (µm) total length (cm) length (cm) Factor length (µm) Code Part no.
25 48.5 40 5 125 Black G1600-60132
64.5 56 5 125 Black G1600-61132
80.5 72 5 125 Black G1600-62132
50 43.5 35 3 150 Red G1600-60233
48.5 40 3 150 Red G1600-60232
64.5 56 3 150 Red G1600-61232
80.5 72 3 150 Red G1600-62232
112.5 104 3 150 Red G1600-64232
75 48.5 40 2.7 200 Yellow G1600-60332
64.5 56 2.7 200 Yellow G1600-61332
80.5 72 2.7 200 Yellow G1600-62332
112.5 104 2.7 200 Yellow G1600-64332
180
CE and CE/MS
Universal Bare Fused-Silica Capillaries

Universal Bare Fused-Silica Capillaries have a window, 75 cm effective length and 363 µm od,
fitting into any CE instrument. To cut them to the correct length we recommend using the
CE column cutter (P/N 5183-4669).
Universal Bare Fused-Silica Capillaries

Id (µm) total length (cm) Effective length (cm) Part no.
20 100 75 190-0431
50 100 75 190-0131
75 100 75 190-0231
100 100 75 190-0331
Bulk Fused-Silica Capillaries

Id (µm) total length (m) Part no.
20 5 160-2660-5
50 5 160-2650-5
75 5 160-2644-5
CE and CE/MS
Polyvinyl alcohol (PVa) Coated Capillaries

PVA coated capillaries contain a permanently adsorbed layer of polyvinyl alcohol. This coating minimizes
hydrophobic and electrostatic solute/wall interactions and eliminates electroosmotic flow (EOF). Using a
proprietary deposition process, the PVA coating is stable over a wide pH range, even under basic conditions,
from pH 2.5 to 9.5. This stability allows the use of many common CE buffers. Because the silica surface is
covered, many proteins and amines can be analyzed without the peak tailing found with uncoated
capillaries. In addition, since EOF is eliminated, cumbersome washing procedures are unnecessary and
migration time reproducibility may be improved.
Each batch of PVA coated capillaries is rigorously tested by Agilent Technologies and includes a
representative electropherogram to assure quality.
The color coding of the capillary (alignment stopper) and the alignment interfaces allow you to easily
combine the correct interface with the capillary. Capillaries for non-Agilent CE systems have removable
alignment stoppers without color code.
PVA coated capillaries can be used for a variety of applications, including protein analysis at physiological
pH, isoelectric focusing, and small anion analysis without the need for flow-reversal agents in the buffer.
PVA coating is available in standard capillaries, or in Agilent Extended Light Path Capillaries ("bubble" cell
capillaries) for high sensitivity applications. Both capillary types are available in longer lengths for use in
non-Agilent systems.
PVA is also available for use with the High Sensitivity Detection Cell for even further improved HPLC-like
sensitivity. In addition, PVA coated capillaries are offered for CE-MS applications. The capillaries are
provided with a normally positioned detection window to allow tandem UV-Vis and MS detection for
improved sample identification.
182
CE and CE/MS
Untreated fused-silica capillary
1. Cytochrome C
2 2. Lysozyme
3. Lactoglobulin A
1
4. Lactoglobulin A
5 PVa coated capillary 5. Lactoglobulin B
4
3
Use of PVA coated capillaries to reduce protein adsorption
5 1. Benzidine
2. Aniline
1 3. o-Toluidine
2 6
4. p-Cl-Aniline
5. 2-Aminonaphthalene
9
4
7
6. 4,4-Methylene-bis(2-chloroaniline)
3
8 7. 3,3-Dichlorobenzidine
8. 2-Amino-5-azotoluene
9. 2-Methyl-5-nitroaniline
CZE analysis of basic amines using PVA coated capillaries (decomposition products of azo dyes)
Goat
Lamb
Analysis of meat proteins by c-IEF using PVA capillaries
CE and CE/MS
PVa Coated Capillaries for agilent CE Systems*

Effective Bubble optical Path Color
Id (µm) total length (cm) length (cm) Factor length (µm) Code Part no.
50 64.5 56 0 50 Green G1600-61219
64.5 56 3 150 Red G1600-61239
125 21.5 0 50 Green G1600-67219
75 64.5 56 0 1200 G1600-68319
125 21.5 0 75 Blue G1600-67319
100 48.5 40 0 100 Gray G1600-60419
64.5 56 0 100 Gray G1600-61419
*Not compatible with borate buffers
note: PVA coated capillaries for CE/MS have a blue alignment stopper matching the blue color code of the alignment
interface for MS-UV detection. The alignment stopper of the 50 µm id PVA capillary for CE/MS has a black dot
for easy identification.
PVa Coated Capillaries for non-agilent CE Systems*

Effective length Bubble optical Path
Id (µm) total length (cm) (cm) Factor length (µm) Part no.
50 71 60 0 50 G160U-61219
71 60 3 150 G160U-61239
100 56 45 0 100 G160U-60419
71 60 0 100 G160U-61419
*Not compatible with borate buffers
note: When extended pathlength capillaries are used in non-Agilent systems, loss of resolution may be found if the axial slit
width is not reduced. In Agilent systems, the alignment interface contains properly matched slits to maintain resolution.
184
CE and CE/MS
CEP Coated Capillaries

CEP coated capillaries contain a permanently bonded polymer coating. This CEP coating shields the
silanol functionality of the capillary surface and helps prevent sample adsorption. Additionally, EOF is
nearly eliminated, making the capillary ideal for applications such as DNA separations with sieving
polymer buffers.
Elimination of EOF also simplifies analysis of anions and organic acids by direct UV detection. Without
EOF reduction, highly mobile ions such as nitrate can migrate in the opposite direction to the slower,
longer chain acids.
The CEP coated capillary is stable from pH 2 to 8. It can be used with borate buffers, offering a
different surface functionality to help alleviate sample adsorption. Each batch of CEP coated capillaries
is rigidly tested by Agilent Technologies and each capillary includes a representative electropherogram
to assure quality.
Restriction fragment separation (36–2645 bp)
CEP Coated Capillaries, 2/pk

total length Effective length Bubble optical Path
Id (µm) (cm) (cm) Factor length (µm) Part no.
75 80.5 72 0 75 G1600-62318
CE and CE/MS
Cross-linked and Bonded µSIl Capillaries

µSIL-FC and µSIL-DNA Capillaries with Windows
A series of coated capillaries specifically designed for CE, which are prepared by cross-linking and bonding
a novel, proprietary fluorocarbon (FC) polymer. µSIL-FC capillaries are chemically inert, hydrophobic,
and stable from pH 2.5-10.
These capillaries are a must-have for cIEF, protein, peptide and carbohydrate separations, as well as
replaceable gel CE applications such as oligonucleotides, DNA fragments, and PCR product separations.
µSIL-DNA capillaries are also coated with an FC polymer but have a 75 µm id to accommodate the
viscosity of entangled polymer solutions. All µSIL capillaries are batch tested to ensure the highest
performance and reproducibility.
µSIL-WAX Capillaries with Windows

µSIL-WAX features a modified, polyethylene oxide, hydrophilic coating made through a special cross-linking
and bonding process. The coating effectively masks active silanol sites, offering exceptional efficiency,
resolution, peak shape and reproducibility. The highly stable coating and near-zero EOF of µSIL-WAX makes
the capillary ideal for CE-MS, and protein and peptide separations from pH 2-5.
µSIL-DNA, 199-2602 Effective length Film thickness

Capillary Id (µm) total length (cm) (cm) (µm) Unit Part no.
µSIL-FC 50 80 50 0.075 3/pk 194-8111
µSIL-DNA 75 65 50 0.075 2/pk 199-2602
µSIL-WAX 50 100 75 0.1 2/pk 196-7203
µSIL-WAX 100 100 75 0.1 2/pk 197-7202
186
CE and CE/MS
Bulk µSIL-DB Capillaries

µSIL-DB coated capillaries are available as µSIL-DB-1 and µSIL-DB-17. In combination with a cellulose
based buffer system, µSIL-DB coated capillaries have been widely used in cIEF applications, PCR product
and DNA fragment separation, and many other CE applications which require reduced EOF.
Capillary Id (mm) length (m) Film thickness (µm) Part no.

DB-1 0.05 10 0.05 126-1012
DB-1 0.20 10 0.05 126-1013
DB-1 0.10 10 0.10 127-1012
DB-17 0.10 10 0.05 126-1713
DB-17 0.10 10 0.10 127-1712
DB-17 0.20 10 0.10 127-1713
Analysis of Allelic ladder with µSIL-DNA Analysis of Myoglobin tryptic digest using µSIL-WAX
CE and CE/MS
Capillary Electrochromatography (CEC) Capillaries

Capillary electrochromatography is a hybrid of CE and LC and can be performed in the Agilent CE system.
Using CE capillaries packed with LC stationary phases, CEC offers the loadability and selectivity of LC and
the high efficiency of CE.
Using the high pressure capabilities of the Agilent CE system, both ends of the CEC capillary can be
pressurized. This process prevents outgassing upon application of high voltage and significantly extends
capillary lifetime.
Use CEC to improve resolution of solutes, which are difficult to resolve by HPLC, for hydrophobic solutes
which cannot be solubilized in MEKC buffers, or for reduced sample and solvent consumption compared
to HPLC.
Standard Packed CEC Capillaries, 2/pk

Id Effective length Color
description (µm) total length (cm) (cm) Code* Part no.
C18, 3 µm 100 33.5 25 Gray 5063-6512
100 48.5 40 Gray 5063-6513
C8, 3 µm 100 33.5 25 Gray 5063-6535
100 48.5 40 Gray 5063-6540
Phenyl, 3 µm 100 33.5 25 Gray 5063-6536
100 48.5 40 Gray 5063-6541
Hypersil/Phenyl, 3 µm 100 48.5 40 Gray 5063-6544
*The color coding of the capillary (alignment stopper) and the interface allows you to easily combine the correct alignment
interface with the capillary.
CEC C8 Capillaries, 2/pk, 5063-6535
188
CE and CE/MS
1. Chlorothiazide
2. Hydrochlorothiazide
3. Chlorthalidone
Isocratic conditions I
4. Hydroflumethiazide
5. Bendroflumethiazide
6. Bumetanide
Isocratic conditions II
Buffer: 50 mmol/
Na2HPO4, pH 2.5
60:20:20 v/v, MeCN/, Buffer/H20

Step gradient CEC
40:20:40 v/v, MeCN/, Buffer//H20
Capillary Electrochromatography of diuretic test mixture

(courtesy of Dr. Melvin Euerby, Astra Charnwood, UK)
2
1. Thiourea
10 2. Methylparaben
34 5 3. Ethylparaben
6 11
4. Propylparaben
1 5. Butylparaben
7 9 6. Pentylparaben
8
7. Naphthalene
8. Biphenyl
12
9. Fluorene
10. Phenanthrene
11. Anthracene
12. Fluoranthene
Capillary Electrochromatography of parabens and aromatics
tIPS & toolS
CEC capillaries require an

Agilent CE system with
external gas supply capabilities.
CE and CE/MS
alignment Interfaces and Capillary Cassette

Agilent Technologies alignment interfaces are an integral part of the Agilent diode-array detection (DAD)
system. These interfaces contain optical slits which are precisely matched to the capillary inner diameter
for optimized sensitivity and linear detection range.
In combination with the capillary cassette, alignment interfaces simplify capillary exchange, protect the
fragile detection window and ensure exact alignment of the window in the detector. Quick-change cassette
allows capillary exchange in less than one minute.
note: The color code of the alignment interface must match the color code of the capillary's built-in
alignment stopper.
alignment Interfaces
Color Corresponding g7100 CE g1600 CE
description Id (µm) Code Capillary Part no. Part no.
Alignment interface for standard 50 Green Green G7100-60210 G1600-60210
capillary 75 Blue Blue G7100-60310 G1600-60310
Alignment interface for standard capillary, 100 Gray Gray
G1600-60310 150 Brown Brown
Alignment interface for Agilent 25 Black Black G7100-60150 G1600-60150
Extended Light Path capillaries 50 Red Red G7100-60230 G1600-60230
75 Yellow Yellow G7100-60330 G1600-60330
CE/MS alignment interface for Blue Blue G7100-60400
360 µm od capillaries, nonmetallic Gray
note: 75, 100 and 150 µm id standard capillaries use the same interface (color blue).
PVA coated 50 and 75 µm id capillary for CE/MS use the same nonmetallic interface with color code blue for use with
standard and extended light path capillaries, and the high sensitivity detector cell.
Capillary cassette
Capillary cassette, G7100-60002 g7100 CE g1600 CE
description Part no. Part no.
Capillary cassette G7100-60002 G1600-60002
note: Only use G7100-60002 cassette in G7100 and G1600-60002 cassette in G1600. Never mix cassettes.
optical filter for dad

g7100 CE g1600 CE
tIPS & toolS Optical filter for DAD G7100-62700 G1600-62700
260 nm, for DNA analysis with polyacrylamide filled capillaries
Cassette and interfaces accept all and oligonucleotide analysis
commercially available capillaries
(~365 µm od).
190
CE and CE/MS
Instrument Parts and Supplies

high Sensitivity detection Cell
The Agilent high sensitivity detection cell – a technological leap which extends sensitivity by an order of
magnitude – provides a solution to sensitivity limitations often encountered in CE. This improvement will
substantially increase the utility of CE for impurity analysis of chiral drugs, biologicals, and compounds of
environmental interest, among others.
The high linear range allows quantification of both <0.1% impurities and the main component in one run.
This is useful for all impurity determinations and is especially useful for determining chiral excess.
The high sensitivity detection cell for the Agilent CE system not only improves detection sensitivity more than
10-fold over standard capillaries, but also extends linearity beyond 2000 mAU and provides unsurpassed
spectral fidelity. These improvements are a result of a proprietary micromachined design which increases
the detection pathlength from 75 µm to 1200 µm while dramatically reducing stray light.
The high sensitivity detection cell has a design comprised of a fused-silica cell body and removable
capillaries. The light path through the cell is made from black fused-silica which significantly minimizes stray
light and defines the aperture for the diode-array spectrometer. In addition, the reflective interior functions
as a "lightpipe," ensuring almost 100% transmission of light which entered the cell. These properties result
in enhanced linearity and unsurpassed spectral fidelity with the diode-array detector.
High Sensitivity Detection Cell
CE and CE/MS
Characteristics of the Agilent High Sensitivity Detection Cell

• Up to 10-fold increase in signal-to-noise
• Detector linearity beyond 2000 mAU for accurate quantitative analysis
• Decoupled design allows replaceable capillaries and reduced cost operation
• Special capillary geometry ensures maintenance of peak symmetry
• Full diode-array spectral capabilities
• Design fits all Agilent CE instruments
high Sensitivity detection Cell

g7100 CE g1600 CE
High sensitivity cell kit G7100-68723 G1600-68723
Includes detection cell, 75 µm id inlet capillary (72 cm) and outlet capillary
(8.5 cm) pair, capillary cassette, fittings (3 fitting screws with seals,
2 fitting caps), cleaning solution, CE Partner CD-ROM
CE cell fitting kit G1600-63200
Includes 3 fitting screws, 2 fitting caps
Replacement detection cell G1600-60027
Cell cleaning fluid, 1 L 5062-8529
Capillary Kits for high Sensitivity detection Cell

g1600 CE
description Effective length (cm) Part no.
75 µm capillary kit with 8.5 cm outlet 56 G1600-68716
72 G1600-68715
88 G1600-68714
PVA coated 75 µm capillary kit with 8.5 cm outlet 56 G1600-68319
High sensitivity cell

with 75 µm id capillary
75 µm id standard capillary
Agilent high sensitivity detection cell vs. 75 µm standard capillary for the CZE separation of naphthalene sulfonic acids
192
CE and CE/MS
CE/MS accessories
The CE/MS Adapter Kit simplifies coupling the Agilent CE system with MS systems equipped with
an electrospray ionization (ESI) source. Integral to this kit is the CE/MS cassette, which completely
thermostats the capillary until it exits the CE system. The cassette offers multiple capillary paths that vary
the capillary length. A method development configuration uses online diode array detection and MS.
For rapid or routine MS analysis, the detector can be bypassed to decrease the total capillary length and
reduce analysis time. The CE/MS adapter kit can be used with the complete Agilent 6000 Series mass
spectrometers, or virtually any electospray-MS platform.
The CE/MS cassette completely thermostats the capillary until it exits the CE system. Methods
development configuration uses online diode array detection (DAD) and MS. For rapid or routine
MS analysis the DAD can be by-passed to decrease the total capillary length and reduce analysis time.
The CE/MS Sprayer Kit includes the electrospray needle and splitter assembly, which allows the direct
connection of the CE instrument with Agilent and other electrospray MS systems. The CE/MS Sprayer Kit
needs the CE/MS Adapter Kit to fully support CE/MS coupling.
CE with tandem UV-Vis and MS detection allows the analysis of complex mixtures. Analyte mixtures are
separated and the components detected via UV-Vis absorption, allowing preliminary identification based
on peak elution time and UV-Vis spectra, or both, when compared to a standard. Online coupling to
electrospray-ionization mass spectrometry (ESI-MS) then reveals unambiguous information on the solute's
molecular weight, and possibly structure.
CE and CE/MS
CE/MS adapter Kit

CE/MS Adapter Kit G1603A
For interfacing the Agilent CE system with a mass spectrometer
Includes parts below, which can be ordered separately*
CE/MS interface cassette, metallic, for G1600 and G7100 CE G1600-60013
CE/MS alignment interface for 360 µm od capillaries, nonmetallic, for G1600 CE G1600-60400
CE/MS alignment interface for 360 µm od capillaries, nonmetallic, for G7100 CE G7100-60400
Bare fused-silica, 50 µm id, 125 cm long, 2/pk G1600-67311
*Interfacing the capillary requires an electrospray needle which is not included in this kit
Interfacing the capillary requires an electospray
needle which is not included in this kit but in
the CE-ESI-MS Nebulizer Kit. For coupling with
non-Agilent MS please contact the MS vendor.
2
1
1. Leu-Enkephalin, MW 555.6
3 2. Met-Enkephalin, MW 573.7
3. VYV, MW 379.4
4 4. Angiotensin II, MW 1046.2
UV MS-tIC (scan)
CE/MS of 4-component peptide mixture (210 fmol)
194
CE and CE/MS
CE/MS Sprayer Kit

CE/MS Sprayer Kit G1607A
Includes CE/MS test sample (5 g quinine sulfate dihydrate) and the parts
listed below
ES needle assembly G1607-60041
CE-ESI sprayer G1607-60001
Splitter assembly G1607-60000
PEEK ferrule, 360 µm for CE/MS Sprayer 5022-2141
Nut, finger-tight fitting and ferrule 2/pk 0100-1543
Flex loc element 2/pk 1520-0401
Gasket 1/pk G1607-20030
Ion kit (ammonium acetate) 5 x 5 mL 8500-4410
CE/MS Capillaries
description Color Code Unit Part no.
Bare fused-silica, 50 µm id, 125 cm long Green 2/pk G1600-67311
Bare fused-silica, 50 µm id, 100 cm long Green 2/pk G1600-67312
PVA coated capillary, 50 µm id, 125 cm long Green 1/pk G1600-67219
PVA coated capillary, 50 µm id, 100 cm long Green 1/pk G1600-67220
PVA coated capillary, 75 µm id, 125 cm long Blue 1/pk G1600-67319
CE and CE/MS
CE Standards & Reagents

Premade buffers help eliminate the time-consuming buffer preparation process. All Agilent buffers and
reagents are designed to meet the stringent demands of CE. Manufactured under GLP/GMP conditions
in ISO 9001 facilities, each is shipped with assay information and verification of purity. Chemicals are all
electrophoresis grade, with nearly all ionic and organic impurities removed. Solutions are prepared under
Class 10 clean room conditions and prefiltered through 0.2 µm filters to ensure removal of particulates.
Superior quality control ensures reproducible results bottle-to-bottle and batch-to-batch.
In addition to a set of kit buffers, which are specially designed for dedicated applications, Agilent offers a
series of basic CZE buffers covering a broad pH range. The product portfolio also includes special buffers
for protein analysis and for Micellar Electrokinetic Chromatography (MEKC). Cleaning and conditioning
solutions complete the offering.
Ultra Pure CE water

description Volume (ml) Part no.
Ultra pure CE water, 5062-8578
Ultra pure CE water 500 5062-8578
Capillary Conditioning Solutions

0.1 N sodium hydroxide 250 5062-8575
1.0 N sodium hydroxide 250 5062-8576
0.1 N phosphoric acid 250 5062-8577
CZE Buffers for Charged analytes

0.1 N sodium hydroxide, 5062-8575 50 mM sodium phosphate buffer, pH 2.5 250 5062-8571
50 mM sodium phosphate buffer, pH 7.0 250 5062-8572
50 mM sodium tetraborate buffer, pH 9.3 250 5062-8573
20 mM sodium tetraborate buffer, pH 9.3 100 8500-6782
50 mM sodium phosphate buffer, pH 2.5,

5062-8571
196
CE and CE/MS
CZE Buffers for Proteins

50 mM phosphate, 0.05% hydroxyethyl cellulose buffer, pH 2.5 250 8500-6786
150 mM phosphate, 200 mM ammonium sulfate buffer, pH 7.0 250 8500-6787
MEKC Buffers for neutral and Charged analytes

50 mM sodium tetraborate, 100 mM sodium dodecyl sulfate buffer, pH 9.3* 250 5062-8574
*Dilute with 50 mM sodium tetraborate, pH 9.3 (P/N 5062-8573) to reduce SDS concentration without affecting the
tetraborate composition or pH
Plating Bath analysis Buffer

Plating bath analysis buffer 250 5064-8236
µPagE Buffer Solutions and oligo Standards

µPAGE tris-borate and urea buffer for µPAGE-10, 4 x 237 mL 590-4005
µPAGE tris-borate and urea buffer for µPAGE-3 and µPAGE-5, 4 x 237 mL 590-4001
µPAGE pd(A)25-30, 40-60 oligonucleotide standard for µPAGE-3 and µPAGE-5, 3 x 50 µL 590-4000
Int. (EmL./Ref)
mAU
150 1
50
3 2 40
30
0 20
200
10
200
Ex [nm]
Em [nm] 0
400 700 2 4 6 8 10 min
The total fluorimetry spectrum of the 50 mM borate buffer CZE analysis of a peptide mixture using pre-made 50 mM
pH 9.2 verifies that the solution is free of fluorescence-active sodium phosphate buffer, pH 2.5
impurities (1 and 2 = Rayleigh stray light of zero and first
order, 3 = Raman stray light).
CE and CE/MS
CE System Start-up and test Kits

Chemical test kits and validation packages are available to help comply with regulatory and quality
standards. The Installation Qualification (IQ) Chemical Kit and Hardware Start-Up Kits, which are shipped
with new instruments, are useful for rapidly verifying system functionality. For rigorous testing, the
Operational Qualification (OQ)/Performance Verification (PV) Kit can be used to verify DAD noise, drift,
linearity, wavelength accuracy and replenishment functionality. The OQ/PV kit is only part of the validation
services available from Agilent Technologies. When implemented by qualified Agilent personnel, our service
packages can be used to help validate your Agilent CE system.
CE System Start-up and test Kits

CE Installation Qualification (IQ) Kit 5063-6514
Includes buffer (20 mM borate, pH 9.3, 100 mL), test sample (4-(hydroxy)-acetophenone,
2 mL), capillary conditioning solution (0.1 N sodium hydroxide, 100 mL)
CE Operational Qualification Performance Verification (OQ/PV) Chemical Kit 5063-6515
Includes buffer (20 mM borate, pH 9.3, 100 mL), test samples (0.1, 0.5, 1.0,
and 5.0 mM 4-(hydroxy)-acetophenone, 2 mL ea.), capillary conditioning solution
(0.1 N sodium hydroxide, 100 mL), test capillary (L 48.5 cm, I 40 cm, id 50 µm),
diskette with methods, sequence, spectral library. note: Method is supported for G1600 only.
CE OQ/PV Chemicals Only Kit 5063-6520
CE System Start-up and Test Kits Includes buffer (20 mM borate, pH 9.3, 100 mL), test samples
(0.1, 0.5, 1.0, and 5.0 mM 4-(hydroxy)-acetophenone, 2 mL)
IQ and oQ/PV test method

Sample: p-Hydroxyacetophenone
Buffer: 20 mM Borate pH 9.2
Capillary: I = 40 cm, L = 48.5 cm, 50 µm id
Injection: 250 mbar*s
Voltage: 30 kV
Temperature: 20 °C
Detector: 192/4 nm
198
CE and CE/MS
Vials and Caps for CE

Crimp/snap top vial, 1 mL, Polypropylene, crimp/snap top 100/pk 5182-0567
Clear, wide opening crimp/snap top vial, 2 mL 100/pk 5182-9697
Snap caps, polyurethane, 5181-1512, 5042-6491
Clear, wide opening crimp/snap top glass vial, 2 mL 500/pk 5183-4623
Amber, wide opening crimp/snap top vial, write-on spot, 2 mL 100/pk 5183-4619
Crimp/snap top vial, 250 µL 1000/pk 9301-0978
Snap caps PEO (polyethylene olefin for chemical resistance) 100/pk 5181-1507
Electrode assembly, standard (for G1600 only),
Snap caps PEO (polyethylene olefin for chemical resistance) 500/pk 5181-1513
G1600-60007
Snap caps PUR (polyurethane for resealing)* 100/pk 5181-1512
Snap caps PUR (polyurethane for resealing)* 500/pk 5042-6491
*PUR caps are recommended to help prevent sample or buffer evaporation even after multiple injections
Instrument Supplies
description Unit Part no. Electrode O-ring, silicone, 5062-8544
Long life HiS Deuterium lamp (8-pin) with RFID tag 5190-0917
Deuterium lamp 2140-0585
Electrode assembly, standard (for G1600 only) G1600-60007
Electrode assembly, short (for G1600 only) G1600-60033
Electrode assembly, standard (for G7100 only) G7100-60007
Electrode assembly, short (for G7100 only) G7100-60033
Electrode O-ring, silicone 5/pk 5062-8544
Electrolyte bottle, 500 mL 9300-1748
Electrolyte bottle, 100 mL 5042-6478 Electrolyte bottle, 500 mL, 9300-1748
Electrolyte bottle cap 9300-1747
Bottle sealing O-ring 0905-1163
Glass filter, solvent inlet, 20 µm 5041-2168
Filter frit adapter, 3 mm 4/pk 5062-8517
Bottle cap plug G1600-23223
Air filter, 5 µm 3150-0619 Filter frit adapters, 5062-8517
Pre-puncher G1600-67201
Screws for pre-puncher/insulation plate holding 10/pk G1600-62402
Air filter, 5 µm, 3150-0619
Screws for pre-puncher/insulation plate holding, Pre-puncher, G1600-67201

G1600-62402
CE and CE/MS
accessories
CE accessory kit G7100-68705
Includes electrode tool, screwdriver, fuses, air filter, glass frit, vials and caps alignment
interfaces (red and green) standard and 50 µm id capillaries: L 64.5 cm, Standard: L 64.5 cm,
Extended Light Path: L 48.5 cm
Rack for 12 mm, 2 mL vials, holds 50 vials per rack, 5/pk 9301-0722
Vial rack, 9301-0722
CE column cutter 5183-4669
Diamond blade replacement kit for CE column cutter 5183-4670
Capillary tubing cutter, 4/pk 5181-8836
window Etching tool

The window etching tool is designed for fast, convenient and reproducible preparation of detection
windows on fused-silica capillaries. The polyimide coating is removed without destroying the inner
polymeric coating. The tool contains three glass blocks with fine grooves, precisely controlling the size of the
windows.
CE column cutter, 5183-4669

Window etching tool, 3/pk 590-3003
Window etching tool, 590-3003
200
CE and CE/MS
Troubleshooting
Basic Capillary Electrophoresis troubleshooting
Symptom Possible Cause Solution(s)

Unstable Current
Variable or no current Air bubble formed in capillary Flush capillary, ramp voltage to limit initial heating,
and/or degas buffers.
Clogged capillary Flush capillary with absorbing solution (such as NaOH).
A "step" on the baseline should be observed when viewing
the online signal at 200 nm. If still plugged, flush manually
with syringe or high pressure gas.
Broken capillary Replace capillary.
No or incorrect solution in buffer vials Fill/change buffer vials.
Large volume injection Normal situation. Current should stabilize during analysis.
Unstable Baseline
Spikes in baseline Precipitates in buffer Filter buffer through 0.2 or 0.45 µm filter.
Micro air bubbles in buffer Degas buffer by ultrasonication or vacuum.
Precipitation of sample Verify that sample components are sufficiently soluble in buffer.
Noisy baseline Optical slit in capillary interface is occluded Clean slit with methanol or water. View under magnifier.
Aging deuterium lamp Use DAD test to measure lamp output and time-on.
Replace if necessary.
Data acquisition rate too high Determine peak width and decrease acquisition rate
if appropriate.
Improper reference wavelength Acquire UV spectrum during analysis. Use lowest wavelength
possible without impinging where sample absorbs. Also use
wide bandwidth.
Buffer absorbs at detection wavelength Use minimally UV-absorbing buffers such as phosphate
and borate, especially below 210 nm.
Drifting baseline Improper capillary alignment Re-seat capillary cartridge in detector block.
Unequilibrated temperature Allow 10-20 minutes for equilibration after opening top cover.
Lamp recently ignited Allow 15-30 minutes for equilibration after igniting lamp.
(Continued)
CE and CE/MS

Poor Peak Efficiency
Broad peaks Sample overloading Decrease sample injection or concentration.
Excessive Joule heating Reduce voltage, buffer conductivity, or capillary id.
Skewed peaks Mismatched sample buffer ion mobilities Match mobilities or increase difference between buffer
and sample conductivity.
Sample overloading Decrease sample injection or concentration.
Tailing peaks Adsorption to capillary wall Use pH extremes, high buffer concentrations, polymer
additives, or coated capillary.
Poor Migration time Reproducibility
Adsorption to capillary walls Changes in EOF caused by buffer (especially phosphates Condition capillary and allow sufficient equilibration time.
and detergents) or sample adsorption Replace capillary.
Hysteresis of wall charge Caused by conditioning capillary at high (or low) pH Avoid pH differences.
and employing a low (or high) pH runnning buffer Allow sufficient equilibration time.
Changes in pH changes due to electrolysis Replenish buffer.
buffer composition
Buffer evaporation Tightly cap buffer vials and reduce carousel temperature.
Conditioning solution waste flushed into outlet reservoir Use separate vial to collect waste.
Conditioning solution carried over into buffer vial First dip capillary in separate buffer or water vial.
Buffer reservoirs not level Generation of laminar flow Level liquid in reservoirs. If not replenishing buffer,
do not use inlet vial for flushing capillary.
Different silanol content Different wall charge and variations in EOF Measure EOF and normalize.
of capillary batches
Temperature changes Changes in viscosity and EOF Use system with capillary thermostatting.
(Continued)
202
CE and CE/MS

Poor Peak area Reproducibility
Sudden application Heating, thermal expansion of buffer, and expulsion Ramp separation voltage or inject buffer plug after sample.
of high voltage of sample
Sample evaporation Increasing sample concentration and peak area Cap vials and/or reduce temperature of sample carousel.
Instrumental limitations System rise time significant proportion of injection time Increase injection time.
Sample carry-over Extraneous injection Use capillary with flat, smooth injection end. Remove polyimide
from end of capillary.
Zero-injection caused Extraneous injection Cannot be totally eliminated. Increase injection amount to
by simply dipping the minimize effect.
capillary in the sample
Sample adsorption to Distorted peak shape (tailing) Change buffer pH. Increase buffer concentration.
capillary walls Non-eluting sample Use additive such as cellulose or coated capillary.
Low signal-to-noise ratio Integration errors Optimize integration parameters. Increase sample
concentration. Use peak height.
Temperature changes Changes in viscosity and injection amount Use system with capillary thermostatting.
of capillary environment
PRODUCT INDEX
Product Index
Agilent Supplies Gas Purifiers ............................................................108 CE and CE/MS
Instrument Supplies.......................................105-106
Autosamplers Alignment Interface .................................................190
Injection Valves.........................................................61 Maintenance Schedule.........................................103 CE/MS Accessories
Kits..........................................................................66-67 Preventive Maintenance Kit ................................104 Adapter Kit ...............................................................194
Loop Capillaries.........................................................64 Quiet Cover ..............................................................109 Capillaries.................................................................195
Maintenance Schedule ...........................................61 Standards Sprayer Kit................................................................195
Metering Device........................................................64 Analyzer Kit............................................................110 Capillaries
Needles and Needle Seats...............................62-63 Calibrant Mixes.....................................................110 Alignment Interface ...............................................190
Trays.............................................................................65 Kits...........................................................................110 Bulk Fused-Silica ....................................................181
Bio-inert Quaternary Tools...........................................................................108 CEP Coated ..............................................................185
Autosampler ....................................................101-102 Loop Capillaries ...........................................................32 Capillary Cassette...................................................190
Column Compartment ...........................................102 Pumps Capillary Electrochromatography (CEC)........188-189
Detectors ..................................................................102 Cross-linked and Bonded µSIL....................186-187
1290 Infinity LC Pump Supplies ............................51
Fittings.......................................................................102 Extended Light Path
Frits and Adapters ....................................................54
Pumps .......................................................................101 (Bubble Cell) Bare Fused-Silica ..................179-180
Valves ........................................................................102 Inlet Valves.................................................................49
Polyvinyl Alcohol (PVA) Coated..................182-184
Capillaries Kits..........................................................................59-60
Standard Bare Fused-Silica..................................178
1200 and 1100 Prep LC Systems ..........................26 Outlet Valves..............................................................49 Universal Bare Fused-Silica .................................181
1220/1120 Infinity Series LC Systems ................33 Pistons and Seals.....................................................50 Capillary Cassette.....................................................190
1260 Bio-inert LC System.......................................30 Purge Valves ..............................................................48 High Sensitivity Detection Cell......................191-192
1260/1200/1100 Infinity Series LC Systems.....23 Routine Maintenance ..............................................47 Instrument Supplies.................................................199
1290 Infinity Series LC Systems ...........................24 Safety Caps ................................................................55 Solution Kits
1290 Valve Head..................................................25-27 Seal Wash ..................................................................52 Cation ........................................................................173
Loop .............................................................................32 Solvent Filters............................................................54 Forensics ..................................................................175
Miscellaneous .....................................................27-29 Solvent Reservoir......................................................53 Inorganic Anion...............................................171-172
PEEK Coated Fused Silica Capillaries – Organic Acids ..........................................................174
Vacuum Degassers...................................................58
100 µL/min Flow ......................................................32 µPAGE ...............................................................176-177
Rack for LC Systems..................................................14
PEEK Coated Fused Silica Capillaries – Standards & Reagents
20 µL/min Flow.........................................................31 Solvent Filters/Degassers ........................................13
Standards......................................................................15 CZE Buffers for Charged Analytes .....................196
PEEK Coated Fused Silica Capillaries CZE Buffers for Proteins.......................................197
for Nano LC................................................................31 Thermostatted Column Compartment
Capillary Conditioning Solutions.........................196
Chip LC ........................................................................100 Capillary Kits ........................................................83-88
MEKC Buffers for Neutral
Detectors Tools ...............................................................................11 and Charged Analytes...........................................197
80 nL and 500 nL Flow Cell..............................95-96 Troubleshooting.................................................546-549 Plating Bath Analysis Buffer ...............................197
Diode Array Detector (DAD)/ Tubing Ultra Pure CE Water ..............................................196
Multiple Wavelength Detector (MWD)...............93 Accessories................................................................35 µPAGE Buffer Solutions and Oligo Standards...197
Evaporative Light Scattering Detector (ELSD).....98 PEEK.............................................................................34 System Start-up and Test Kits...............................198
Fluorescence Detector (FLD) .................................99 Rigid Capillary Tubing ..............................................35 Troubleshooting.................................................201-203
Lamps ..........................................................................90 Vial Rack .....................................................................200
Unions............................................................................42
Maintenance..............................................................89 Vials and Caps...........................................................199
Valves
Maintenance Kits......................................................97 Window Etching Tool...............................................200
Preparative Flow Cells.............................................96 Injection Valves.........................................................73
Refractive Index Detector (RID) ............................98 Maintenance Notes .................................................72
Variable Wavelength Detector (VWD)...........91-92 Manual Injection Valves Columns for Biomolecule Separations
Fittings and Unions with Position Sensing Switches .....................76-77 Affinity Chromatography
Capillary and Fittings Kits .................................36-39 Sample Loops ......................................................78-79 Agilent Bio-Monolith Protein A ..................434-435
Fittings...................................................................40-41 Switching Valves Multiple Affinity Removal System..............438-440
How to Align Connection Properly.......................45 External Switching Valve......................................74 Multiple Affinity Removal System Starter Kits.....441
How to Prepare Connection...................................44 Internal Switching Valve.......................................75 Protein Fractionation System ..............................437
How to Tighten Correctly........................................43 Syringes for Manual Injection Proteomic Reagents ..............................................442
Fraction Collectors mRP-C18 High-Recovery Protein ................442-443
Fitted Plungers........................................................80
Capillary Kits and Needles .....................................70 Analysis Scale
PTFE-Tipped Plungers............................................81
Collecting Tubes and Trays.....................................69 Capillary and Nano.................................................452
G1364D Micro Fraction Collector..........................71 MicroBore (1.0 mm id)..........................................461
Maintenance Schedule ...........................................68 Applications ZORBAX Bio-SCX Series II...................................458
Well Plate Trays ........................................................69 Citations
In-Line Filters ...............................................................12 BioPharmaceutical ...................................................552 PL-SAX ......................................................................487
LC/MS Chemical/Industrial .................................................580 PL-SCX ......................................................................487
Chemicals.................................................................107 Environmental............................................................583 PLRP-S...............................................................486-487
Cleaning Supplies...................................................108 Food and Consumer Products ...............................594 Poroshell 300...........................................................486
Foreline Pump .........................................................107 Pharmaceutical..........................................................611 ZORBAX 300............................................................485
644
PRODUCT INDEX
Column Selection Other HPLC Techniques Pump Maintenance Procedure...........................125

Amino Acid Analysis.............................................362 Hi-Plex for Carbohydrate Analysis.....................340 Pump Supplies................................................151-152
Broad Distribution..................................................363 ZORBAX HILIC Plus ..............................................324 Sample Loops .........................................................153
DNA and RNA Oligonucleotide..........................360 ZORBAX Ion-Exchange.........................................333 Tubing .......................................................................155
Natural and Synthetic Peptides .........................358 ZORBAX Normal-Phase ...............................326-328 Valve Replacement Parts.............................152-153
Peptide Mapping....................................................356 Preparative HPLC Troubleshooting................................................133-136
Protein ......................................................................353 Bulk Materials ........................................................321 Valve Supplies...................................................127-128
Ion-Exchange Chromatography Load & Lock ............................................................322 Waters HPLC Systems
Agilent Bio IEX .......................................................402 Polaris Prep .............................................................321 Autosampler Syringes ..................................137-138
Agilent Bio MAb ....................................................399 Prep LC.............................................................311-312 Capillaries ................................................................148
Agilent Bio-Monolith ....................................412-413 Pursuit and Pursuit XRs Prep .............................319 Detector Lamps......................................................137
PL-SAX Strong Anion-Exchange........................406 ZORBAX PrepHT ....................................................314 Detector Supplies ..................................................142
PL-SCX Strong Cation-Exchange .......................410 Reversed-Phase HPLC Fittings, Ferrules and Unions ..............................149
Literature............................................................477-484 HC-C18(2).........................................................304-305 Performance Maintenance Kits .................144-158
Method Development PLRP-S .....................................................................306 Pump Maintenance Procedure...........................124
Bio Ion-Exchange Column ...................................447 Polaris.......................................................................298 Pump Supplies................................................139-142
High Sensitivity Capillary Column......................451 Pursuit ..............................................................287-288 Sample Loops .........................................................143
Reversed-Phase LC/MS Column.......................446 TC-C18(2) .........................................................304-305 Valve Replacement Parts.....................................142
SEC Column ....................................................449-450 ZORBAX 80Å Extend-C18 ....................................274 Well Plates.................................................................115
ZORBAX Columns..................................................444 ZORBAX 80Å StableBond....................................264
Purification - Prep HPLC ZORBAX Bonus-RP ...............................................278
PL-SAX and PL-SCX......................................472-473 ZORBAX Eclipse PAH ...........................................254 GPC/SEC Columns and Standards
PLRP-S..............................................................467-468 ZORBAX Eclipse Plus ...........................................248 Aqueous
Peptide Purification ZORBAX Eclipse XDB...........................................256 PL aquagel-OH Analytical....................................525
VariPure IPE ..........................................................476 ZORBAX Original....................................................283 PL aquagel-OH Preparative .................................528
VariTide RPC .........................................................475 ZORBAX Rx .............................................................272 Column Accessories................................................529
ZORBAX PrepHT ....................................................466 USP Designations ............................................343-346 Organic
Reversed-Phase HPLC PLgel Individual Pore Size ...................................505
PLRP-S .....................................................................387 PLgel MIXED...................................................498-501
Poroshell 120 ..........................................................385 PLgel MIXED-LS.....................................................502
Poroshell 300 ..................................................380-381
CrossLab Supplies
PLgel MiniMix.........................................................504
ZORBAX 300Extend-C18 ......................................376 Autosampler Maintenance....................................119 PLgel Preparative...................................................506
ZORBAX 300StableBond......................................367 Autosampler Syringes.....................................116-118 Polymer Standards
ZORBAX Eclipse CTC HPLC Autosamplers EasiCal......................................................................536
Amino Acid Analysis (AAA)........................394-395 Autosampler Syringes ..........................................169 EasiVial.....................................................................532
ZORBAX RRHD 300-Diphenyl .............................374 Capillaries and Tubing.............................................130 Polyacrylic Acid......................................................545
Size Exclusion Chromatography (SEC) Detector Lamps ........................................................113 Polyethylene Glycol/Oxide..........................541-542
Agilent Bio SEC-3 ..................................................418 Dionex HPLC Systems Polymethylmethacrylate...............................539-540
Agilent Bio SEC-5 ..................................................424 Autosampler Supplies...........................................158 Polysaccharides .............................................543-544
ProSEC 300S ...........................................................428 Autosampler Syringes ..........................................157 Polystyrene......................................................537-538
ZORBAX GF-250 and GF-450 ..............................431 Buffer Loops............................................................160 Setting Up a GPC/SEC System ....................491-495
Capillaries ........................................................166-168 Special Application
Detector Lamps......................................................157 EnviroPrep................................................................507
Columns for Small Molecule Fittings, Ferrules and Unions ..............................168
Separations MesoPore ................................................................520
In-Line Filters ..........................................................168 OligoPore .................................................................521
Column Selection Performance Maintenance Kits .................161-165 PL HFIPgel ...............................................................509
Column and Mobile Phase Guidelines........211-213 Pump Maintenance Procedure...........................126 PL Rapide.........................................................510-511
Method Development...................................220-221 Pump Supplies................................................158-159 PLgel Olexis.............................................................508
Quick Guide to Reversed-Phase.................207-209 Sample Loops .........................................................160 PlusPore...........................................................514-515
Small Molecule Overview............................218-219 Tubing .......................................................................168 PolarGel....................................................................512
Fast Columns for Reversed-Phase HPLC/UHPLC Valve Replacement Parts.....................................159 PolyPore ...................................................................516
Fast Guards for UHPLC ........................................246 Fittings ........................................................................131 ResiPore...................................................................518
Poroshell 120 ..........................................................228 In-Line Filters ............................................................132
ZORBAX Rapid Resolution Performance Maintenance Kits............................129
High Definition (RRHD) 1.8 µm...........................233 Pump Maintenance .................................................124
ZORBAX Rapid Resolution Pump Supplies..................................................122-123
High Throughput (RRHT) 1.8 µm .......................239 Sealing Mats .............................................................115
Guard Columns.................................................223-224 Shimadzu HPLC Systems
Kits for Analytical HPLC Autosampler Syringes ..........................................150
ZORBAX Method Development Kits.........284-285 Capillaries ................................................................154
ZORBAX Method Validation Kits ...............286-288 Detector Lamps......................................................150
Oligo Solutions Fittings, Ferrules and Unions ..............................155
StratoSpheres DNA Cartridges ..........................347 In-Line Filters ..........................................................156
TOP Cartridges ...............................................348-349 Performance Maintenance Kits .........................154
WWW.AGILENT.COM/CHEM/LC 645
PART NUMBER INDEX
Part Number Index

0100-0549 ..........................................107 0101-1250.............................................79 1535-4045 ................................74-75, 77 443905-902 ........................................313
0100-0900.............................................42 0101-1251.............................................79 1535-4046.............................................77 443910-901 ........................................313
0100-0969 ..........................................105 0101-1252.............................................79 1535-4860.............................................79 443910-902 ........................................313
0100-1259.............................................41 0101-1253.............................................77 1535-4970..................................104, 107 446905-101 ........................................313
0100-1516................40, 92, 96, 99, 106 0101-1254.............................................77 1535-5045.............................................77 446905-102 ........................................313
0100-1543 ..........................................195 0101-1255.............................................77 1535-5082.............................................77 446905-301 ........................................313
0100-1597 ..........................................107 0101-1258.............................................75 160-2644-5 .........................................181 446905-302 ........................................313
0100-1631.............................................40 0101-1267......................................61, 73 160-2650-5 .........................................181 446905-901 ........................................313
0100-1710......................................11, 58 0101-1268......................................61, 73 160-2660-5 .........................................181 446905-902 ........................................313
0100-1847.............................................42 0101-1288.......................................74-75 190-0131.............................................181 446910-102 ........................................313
0100-1849......................................61, 73 0101-1360.............................................75 190-0231.............................................181 449905-101 ........................................313
0100-1850......................................75, 77 0101-1362.............................................75 190-0331.............................................181 449905-102 ........................................313
0100-1851 ........61, 73-75, 77, 101-102 0101-1385......................................61, 73 190-0431.............................................181 449905-301 ........................................313
0100-1852.............................................75 0101-1409 .......................74-75, 77, 102 191-1311.............................................177 449905-302 ........................................313
0100-1853......................................61, 73 0101-1415.......................................74-75 191-3211.............................................177 449905-501 ........................................313
0100-1854....................................75, 108 0101-1416.............................61, 73, 101 191-5211.............................................177 449905-502 ........................................313
0100-1855...........................75, 104, 108 0101-1417 ................................74-75, 77 192-1311.............................................176 449905-901 ........................................313
0100-1859.............................................77 0101-1421.......................................74-75 192-3211.............................................176 449905-902 ........................................313
0100-1860.............................................77 0101-1422......................................61, 73 192-5211.............................................176 449910-902 ........................................313
0100-1921.............................................79 0101-2415......................................61, 73 194-8111.............................................186 5001-3702.............................................82
0100-1922.............................................79 01018-22707 ........................................48 196-7203.............................................186 5001-3726.............................................14
0100-1923.............................................79 01018-23702 ........................................11 197-7202.............................................186 5001-3743.............................................52
0100-1924.............................................79 01018-60025 ........................................54 199-2602.............................................186 5021-1816.............................................28
0100-2051..................................104, 108 01018-68722 ........................................59 204310 ................................................442 5021-1817.............................................28
0100-2086.............................................41 01048-87302 ........................................28 2140-0585 ..........................................199 5021-1818.............................................28
0100-2087.............................................75 01078-87302..................................32, 64 2140-0590.............................................90 5021-1819.......................................28-29
0100-2088......................................61, 73 01078-87305 ........................................28 2140-0600.............................................99 5021-1820.............................................27
0100-2089.............................................75 01080-68702 ........................................15 2140-0813.............................................90 5021-1821.............................................27
0100-2175.............................................40 01080-68704 ........................................15 2140-0820.............................................90 5021-1822.............................................27
0100-2231......................................61, 73 01080-83202 ........................................40 280959-904 ..........................................12 5021-1823......................................27, 92
0100-2233.............................................75 01090-27609 ........................................12 280959-907 ..........................................12 5021-1845..................................262, 270
0100-2298.............................................42 01090-68702 ........................................12 3150-0509.............................................13 5021-1866.............................................11
0100-2304 ..........................................106 01090-68703 ........................................12 3150-0576.............................................13 5022-2133.............................................42
0100-2410.............................................35 01090-87304 ........................................28 3150-0577.............................................13 5022-2141 ..........................................195
0100-2441.............................................42 01090-87306..................................23, 33 3150-0619 ..........................................199 5022-2144.............................................42
0101-0376.............................................79 01090-87610 ........................................23 3150-0944.............................................54 5022-2145.............................................42
0101-0377.............................................79 01090-87611 ........................................23 3162-0178 ..........................................106 5022-2146.............................................95
0101-0378.............................................79 01100-68700 ........................................11 3162-1056 ..........................................107 5022-2155.............................................58
0101-0379.............................................79 05971-80103......................................106 3162-1057 ..........................................107 5022-2159.............................................27
0101-0620.............................................77 05980-60051......................................108 400510 ................................................442 5022-2165.............................................12
0101-0623.............................................77 0890-1727 ..........................................107 410910-101 ........................................313 5022-2166.............................................12
0101-0921......................................61, 73 0890-1761.............................................34 410910-102 ........................................313 5022-2175.............................................64
0101-1050......................................61, 73 0890-1762.............................................34 410910-301 ........................................313 5022-2184......................................42, 95
0101-1219.............................................79 0890-1763....................................34, 102 410910-302 ........................................313 5022-2185.............................................12
0101-1226.............................................79 0890-1915....................................34, 106 410910-501 ........................................313 5022-2188.............................................51
0101-1227.............................................79 0905-1163 ..........................................199 410910-502 ........................................313 5022-2192......................................48, 54
0101-1228.............................................79 0905-1175.............................................52 413910-101 ........................................313 5022-6503.............................................82
0101-1229.............................................79 0905-1192.............................................48 413910-102 ........................................313 5022-6509.............................................29
0101-1230.............................................79 0905-1294.............................................64 413910-301 ........................................313 5022-6510.............................................29
0101-1231.............................................77 0905-1420.............................................51 413910-302 ........................................313 5022-6531.............................................69
0101-1232.............................................77 0905-1516.............................................54 413910-501 ........................................313 5022-6532.............................................69
0101-1233.............................................77 0905-1599.............................................64 413910-502 ........................................313 5022-6533.............................................69
0101-1234.............................................79 0905-1717.............................................64 419910-301 ........................................313 5022-6534.............................................69
0101-1235.............................................79 0905-1718.............................................52 419910-302 ........................................313 5022-6536.............................................41
0101-1236.............................................79 0905-1719.............................................51 419910-501 ........................................313 5022-6538......................................65, 69
0101-1237.............................................79 0905-1731 ..........................................101 419910-502 ........................................313 5022-6539......................................65, 69
0101-1238.............................................79 12102300............................................349 420212-901 ........................................313 5022-6541.............................................71
0101-1239.............................................79 12102301............................................349 420212-902 ........................................313 5022-6542.............................................71
0101-1240.............................................79 126-1012.............................................187 420420-901 ........................................313 5022-6543.............................................71
0101-1241.............................................79 126-1013.............................................187 420910-901 ........................................313 5022-6544.............................................71
0101-1242.............................................79 126-1713.............................................187 420910-902 ........................................313 5022-6546.............................................71
0101-1243.............................................79 127-1012.............................................187 440905-901 ........................................313 5023-0208.............................................71
0101-1244.............................................79 127-1712.............................................187 440905-902 ........................................313 5023-0209.............................................71
0101-1245.............................................79 127-1713.............................................187 440910-901 ........................................313 5023-0213.............................................71
0101-1246.............................................79 1400-0563 ..........................................107 440910-902 ........................................313 5023-0214.............................................71
0101-1247.............................................79 14251921............................................349 443905-101 ........................................313 5023-0215.............................................71
0101-1248.............................................79 1460-2571 .........................104-105, 108 443905-102 ........................................313 5023-0238.............................................71
0101-1249.............................................79 1520-0401 ..........................................195 443905-901 ........................................313 5023-0271.............................................12
646
PART NUMBER INDEX
5023-0282.............................................11 5061-3362.............................................35 5064-8264..................................373, 460 5065-9978......................................34, 52

5023-1803.............................................42 5062-2418.............................................40 5064-8265..................................373, 460 5067-1540.............................................41
5041-2168....................................54, 199 5062-2461.............................................23 5064-8266..................................373, 460 5067-1547.............................................41
5042-1385.............................................69 5062-2462....................23-24, 33-34, 99 5064-8267..................................373, 460 5067-1551.............................................12
5042-1386.............................................69 5062-2463......................................34, 99 5064-8268..................................373, 460 5067-1553.............................................12
5042-1388.............................................69 5062-2478 ..........................................395 5064-8269 ..........................................263 5067-1555.............................................12
5042-1389.............................................69 5062-2479 ..........................................395 5064-8270..................................373, 460 5067-1557.............................................41
5042-6454.............................................69 5062-2483......................................34, 58 5064-8271 ..........................................263 5067-1558.............................................41
5042-6458.............................................69 5062-2484.............................................52 5064-8273.............................................12 5067-1562.............................................12
5042-6459.............................................69 5062-2486.............................................11 5064-8286 ..........................................263 5067-1565.............................................54
5042-6461.............................................34 5062-8517....................................54, 199 5064-8287 ..........................................263 5067-1581.............................................77
5042-6462.............................................34 5062-8522......................................23, 92 5064-8288 ..........................................263 5067-1582 ..........................................100
5042-6463.............................................34 5062-8524..................................172, 175 5064-8291 ..........................................263 5067-1584 ..........................................100
5042-6470.............................................69 5062-8529 ..........................................192 5064-8293.............................................64 5067-1585 ..........................................100
5042-6476.............................................15 5062-8534.............................................58 5064-8294..................................373, 460 5067-1595.............................................84
5042-6478 ..........................................199 5062-8535 ...............................23, 33, 92 5064-8295..................................373, 460 5067-1596.............................................85
5042-6491 ..........................................199 5062-8541.............................................40 5064-8296 ..........................................263 5067-1597.............................................85
5042-6500.............................................40 5062-8544 ..........................................199 5064-8297 ..........................................263 5067-4104.............................................77
5042-8502.............................................69 5062-8562.............................................49 5064-8298 ..........................................263 5067-4105.............................................77
5042-8507.............................................52 5062-8571 ..........................................196 5064-8300..................................373, 460 5067-4107.............................................75
5042-8517......................................42, 71 5062-8572 ..........................................196 5065-4402.............................................69 5067-4108.............................................75
5042-8518......................................42, 71 5062-8573 ..........................................196 5065-4410.............................................41 5067-4111.............................................75
5042-8519......................................42, 71 5062-8574 ..........................................197 5065-4420.............................................15 5067-4112.............................................75
5042-8922.............................................58 5062-8575..................................172, 196 5065-4421.............................................53 5067-4113.............................................75
5042-8954.............................................52 5062-8576.........................172, 174, 196 5065-4422......................................41, 95 5067-4114......................................61, 73
5042-8957.............................................41 5062-8577 ..........................................196 5065-4423.............................................41 5067-4117.......................................74-75
5042-9954.............................................11 5062-8578 .........................172-175, 196 5065-4426.............................................40 5067-4118.......................................74-75
5042-9967.............................................11 5062-8587.............................................64 5065-4427 ..........................................460 5067-4121.............................................75
5043-0221.............................................56 5062-8588.............................................82 5065-4454.............................................40 5067-4124.............................................51
5043-0222.............................................56 5063-6502.............................................77 5065-4459..................................373, 460 5067-4131....................................74, 101
5043-0223.............................................56 5063-6506.............................................63 5065-4460..................................373, 460 5067-4132.......................................74-75
5043-0224.............................................56 5063-6510 ..........................................174 5065-4461..................................373, 460 5067-4134.......................................74-75
5043-0225.............................................56 5063-6511 ..........................................172 5065-4462..................................373, 460 5067-4137.............................................75
5043-0226.............................................56 5063-6512 ..........................................188 5065-4463..................................373, 460 5067-4141.............................................77
5043-0227.............................................56 5063-6513 ..........................................188 5065-4464..................................379, 460 5067-4142.......................................74-75
5043-0228.............................................57 5063-6514 ..........................................198 5065-4465..................................379, 460 5067-4144.......................................74-75
5043-0229.............................................57 5063-6515 ..........................................198 5065-4466..................................379, 460 5067-4146.......................................74-75
5043-0230.............................................57 5063-6520 ..........................................198 5065-4467..................................379, 460 5067-4148.......................................74-75
5043-0231.............................................57 5063-6526.............................................82 5065-4468..................................384, 460 5067-4158.............................................77
5043-0232.......................................56-57 5063-6531.............................................53 5065-4498.............................................66 5067-4159..............................74-75, 102
5043-0233.............................................57 5063-6535 ..........................................188 5065-4499.............................................60 5067-4170.............................................75
5043-0234.............................................56 5063-6536 ..........................................188 5065-4500.............................................12 5067-4174.............................................48
5043-0235.............................................57 5063-6540 ..........................................188 5065-9901.............................................12 5067-4202.............................................77
5043-0236.............................................57 5063-6541 ..........................................188 5065-9908 ..........................................110 5067-4601.......................................83-85
5043-0237.............................................57 5063-6544 ..........................................188 5065-9910..................................373, 460 5067-4607.............................................29
5043-0238.............................................57 5063-6586......................................50, 64 5065-9911..................................373, 460 5067-4608.......................................28-29
5043-0239.............................................57 5063-6589......................................51, 64 5065-9912..................................458, 460 5067-4609.............................................29
5043-0242.............................................56 5063-6591.............................................40 5065-9913..................................373, 460 5067-4633.............................................37
5043-0243.............................................56 5063-6592.............................................95 5065-9914..................................373, 460 5067-4638.............................................12
5043-0255.............................................57 5063-6593......................................41, 95 5065-9915..................................373, 460 5067-4646 ...............................38, 84, 86
5043-0272.............................................56 5063-6597......................................15, 99 5065-9922.............................................60 5067-4647.............................................25
5043-0300.............................................56 5063-6598.............................................58 5065-9923..................................373, 460 5067-4648.............................................28
5043-0828.............................................56 5063-6599.............................................58 5065-9924..................................373, 460 5067-4649.............................................25
5043-0829.............................................56 5064-8203 ..........................................173 5065-9926.............................................29 5067-4650.............................................25
5043-0830.............................................56 5064-8205 ..........................................173 5065-9927.............................................29 5067-4651.............................................25
5043-0831.............................................56 5064-8206 ..........................................173 5065-9931.............................................28 5067-4653.............................................26
5043-0832.............................................56 5064-8208 ..........................................175 5065-9932.............................................28 5067-4657.............................................24
5061-3303......................................40, 99 5064-8209 ..........................................175 5065-9933.......................................28-29 5067-4658.............................................24
5061-3304.............................................39 5064-8211.............................................11 5065-9935.............................................27 5067-4659.............................................24
5061-3315.............................................39 5064-8220.............................................15 5065-9937.............................................36 5067-4660.............................................24
5061-3327.............................................99 5064-8236 ..........................................197 5065-9938.............................................36 5067-4661.............................................51
5061-3328.............................................99 5064-8253 ..........................................271 5065-9939.............................................37 5067-4662.............................................67
5061-3329.............................................99 5064-8254 ..........................................271 5065-9942..................................458, 460 5067-4669.............................................24
5061-3330 ..........................................395 5064-8255 ..........................................271 5065-9947......................................37, 82 5067-4670.............................................24
5061-3331 ..........................................395 5064-8256 ..........................................271 5065-9948......................................35, 41 5067-4678.............................................50
5061-3332 ..........................................395 5064-8257 ..........................................271 5065-9950......................................35, 41 5067-4682......................................38, 86
5061-3333 ..........................................395 5064-8258..................................271, 460 5065-9952.............................................52 5067-4684.............................................25
5061-3334 ..........................................395 5064-8259..................................373, 460 5065-9963.............................................28 5067-4685.............................................28
5061-3335 ..........................................395 5064-8260 ..........................................271 5065-9964.............................................27 5067-4686.............................................25
5061-3337 ..........................................395 5064-8261 ..........................................271 5065-9967.............................................40 5067-4687.............................................25
5061-3339 ..........................................395 5064-8262 ..........................................271 5065-9971......................................34, 42 5067-4688.............................................28
5061-3361.............................................35 5064-8263..................................373, 460 5065-9976.............................................34 5067-4689.............................................26
PART NUMBER INDEX
5067-4695.....................50, 64, 101-102 5069-3637 ..........................................412 5188-6557 ..........................................439 5190-2433 ..........................................405

5067-4697.............................................51 5069-3639 ..........................................435 5188-6558 ..........................................439 5190-2434 ..........................................405
5067-4699.............................................59 5080-5400 ..........................................108 5188-6559 ..........................................439 5190-2435 ..........................................405
5067-4703......................................32, 64 5133001 ..............................................349 5188-6560 ..........................................439 5190-2436 ..........................................405
5067-4710......................................32, 64 5133005 ..............................................349 5188-6562 ..........................................439 5190-2439 ..........................................405
5067-4716.............................................51 5180-4108......................................40, 99 5188-8283 ..........................................441 5190-2440 ..........................................405
5067-4717.............................................51 5180-4114......................................40, 99 5188-8825 ..........................................439 5190-2441 ..........................................405
5067-4728.......................................48-49 5181-1507 ..........................................199 5188-8826 ..........................................439 5190-2442 ..........................................405
5067-4729......................................39, 87 5181-1512 ..........................................199 5190-0443 ..........................................110 5190-2443 ..........................................405
5067-4730.............................................87 5181-1513 ..........................................199 5190-0469 ..........................................110 5190-2444 ..........................................405
5067-4733.............................................40 5181-1541.............................................71 5190-0488.............................................15 5190-2445 ..........................................405
5067-4735.............................................25 5181-8836 ..........................................200 5190-0551 ..........................................110 5190-2446 ..........................................405
5067-4737.............................................28 5182-0567 ..........................................199 5190-0554 ..........................................110 5190-2447 ..........................................405
5067-4738.............................................40 5182-1530.............................................90 5190-0555 ..........................................110 5190-2448 ..........................................405
5067-4739.............................................40 5182-9697 ..........................................199 5190-0556 ..........................................110 5190-2451 ..........................................405
5067-4741....................................42, 102 5182-9710 ..........................................106 5190-0917....................................90, 199 5190-2452 ..........................................405
5067-4744.............................................25 5183-2021 ..........................................285 5190-0924.............................................11 5190-2453 ..........................................405
5067-4745.............................................25 5183-2022 ..........................................285 5190-1401 ..........................................108 5190-2454 ..........................................405
5067-4746.............................................26 5183-4619 ..........................................199 5190-1431 ..........................................284 5190-2455 ..........................................405
5067-4767.............................................88 5183-4623 ..........................................199 5190-1432 ..........................................284 5190-2456 ..........................................405
5067-4769.............................................88 5183-4624 ..........................................285 5190-1433 ..........................................284 5190-2459 ..........................................405
5067-4777.............................................29 5183-4625 ..........................................285 5190-1434 ..........................................284 5190-2460 ..........................................405
5067-4778.............................................29 5183-4626 ..........................................285 5190-1435 ..........................................284 5190-2461 ..........................................405
5067-4779.............................................29 5183-4627 ..........................................285 5190-1436 ..........................................284 5190-2462 ..........................................405
5067-4780.............................................29 5183-4669 ..........................................200 5190-1443 ..........................................104 5190-2463 ..........................................405
5067-4781.............................................29 5183-4670 ..........................................200 5190-1480.............................................80 5190-2464 ..........................................405
5067-4782.............................................29 5185-5807 ..........................................285 5190-1484.............................................80 5190-2465 ..........................................405
5067-4798.............................................58 5185-5808 ..........................................285 5190-1485.............................................80 5190-2466 ..........................................405
5067-4800.............................................87 5185-5809 ..........................................285 5190-1486.......................................80-81 5190-2467 ..........................................405
5067-5103......................................38, 88 5185-5810 ..........................................285 5190-1492.............................................81 5190-2468 ..........................................405
5067-5104.............................................25 5185-5920.........................269, 372, 463 5190-1494.............................................80 5190-2471 ..........................................405
5067-5106.............................................25 5185-5921 ..........................................261 5190-1499.............................................81 5190-2472 ..........................................405
5067-5107.............................................25 5185-5922 ..........................................282 5190-1501.............................................80 5190-2473 ..........................................405
5067-5109.............................................26 5185-5923 ..........................................277 5190-1505.............................................81 5190-2474 ..........................................405
5067-5110.............................................26 5185-5968..................................384, 463 5190-1508.............................................80 5190-2475 ..........................................405
5067-5111.............................................26 5185-5984 ..........................................439 5190-1512.............................................81 5190-2476 ..........................................405
5067-5112.............................................26 5185-5985 ..........................................439 5190-1515.............................................80 5190-2479 ..........................................405
5067-5113.............................................26 5185-5986 ..........................................441 5190-1520.............................................81 5190-2480 ..........................................405
5067-5120.............................................28 5185-5987 ..........................................441 5190-1522.............................................80 5190-2481 ..........................................405
5067-5189.............................................39 5185-5988 ..........................................441 5190-1526.............................................81 5190-2482 ..........................................405
5067-5378.............................................58 5185-5990 ..........................................441 5190-1558.............................................81 5190-2483 ..........................................405
5067-5380.............................................58 5185-5991 ..........................................441 5190-1560.............................................81 5190-2484 ..........................................405
5067-5383.............................................58 5188-2743.............................................13 5190-1561.............................................81 5190-2485 ..........................................405
5068-0001.............................................75 5188-2744.............................................13 5190-1562.............................................81 5190-2486 ..........................................405
5068-0002.............................................75 5188-2745.............................................13 5190-1564.............................................81 5190-2487 ..........................................405
5068-0004.............................................48 5188-2746.............................................13 5190-1571.............................................81 5190-2488 ..........................................405
5068-0005.............................................48 5188-5217 ..........................................439 5190-2401 ..........................................401 5190-2491 ..........................................405
5068-0006.......................................74-75 5188-5218 ..........................................439 5190-2402 ..........................................401 5190-2492 ..........................................405
5068-0007......................................61, 73 5188-5230 ..........................................439 5190-2403 ..........................................401 5190-2493 ..........................................405
5068-0008.......................................74-75 5188-5231 ..........................................442 5190-2404 ..........................................401 5190-2494 ..........................................405
5068-0011.......................................74-75 5188-5249 ..........................................441 5190-2405 ..........................................401 5190-2495 ..........................................405
5068-0012.......................................74-75 5188-5250 ..........................................441 5190-2406 ..........................................401 5190-2496 ..........................................405
5068-0040..............................74-75, 102 5188-5251 ..........................................441 5190-2407 ..........................................401 5190-2499 ..........................................405
5068-0041..............................74-75, 102 5188-5252 ..........................................441 5190-2408 ..........................................401 5190-2500 ..........................................405
5068-0044.......................................74-75 5188-5253 ..........................................441 5190-2411 ..........................................401 5190-2501 ..........................................423
5068-0045..............................74-75, 102 5188-5254 ..........................................441 5190-2412 ..........................................401 5190-2502 ..........................................423
5068-0052.............................................77 5188-5289 ..........................................439 5190-2413 ..........................................401 5190-2503 ..........................................423
5068-0053.............................................77 5188-5321.............................................69 5190-2414 ..........................................401 5190-2504 ..........................................423
5068-0060 ...............74-75, 77, 101-102 5188-5322.............................................69 5190-2415 ..........................................401 5190-2505 ..........................................423
5068-0067.......................................74-75 5188-5332 ..........................................439 5190-2416 ..........................................401 5190-2506 ..........................................423
5068-0076.......................................74-75 5188-5333 ..........................................439 5190-2419 ..........................................401 5190-2507 ..........................................423
5068-0077.......................................74-75 5188-5334 ..........................................439 5190-2420 ..........................................401 5190-2508 ..........................................423
5068-0082.............................................77 5188-5336 ..........................................439 5190-2421 ..........................................405 5190-2509 ..........................................423
5068-0093.......................................74-75 5188-5341 ..........................................439 5190-2422 ..........................................405 5190-2510 ..........................................423
5068-0095.......................................74-75 5188-6408 ..........................................439 5190-2423 ..........................................405 5190-2511 ..........................................423
5068-0097.......................................74-75 5188-6409 ..........................................439 5190-2424 ..........................................405 5190-2512 ..........................................423
5068-0115.............................................75 5188-6410 ..........................................439 5190-2425 ..........................................405 5190-2513 ..........................................423
5068-0116.............................................75 5188-6411 ..........................................439 5190-2426 ..........................................405 5190-2514 ..........................................423
5068-0122.............................................48 5188-6510 ..........................................442 5190-2427 ..........................................405 5190-2515 ..........................................423
5068-0123.............................................48 5188-6511 ..........................................442 5190-2428 ..........................................405 5190-2516 ..........................................427
5069-3635 ..........................................412 5188-6523 ..........................................110 5190-2431 ..........................................405 5190-2517 ..........................................427
5069-3636 ..........................................412 5188-6529.............................................15 5190-2432 ..........................................405 5190-2518 ..........................................427
648
PART NUMBER INDEX
5190-2519 ..........................................427 687975-302 ........................................229 726975-302 ...............................243, 277 8001-0405 ..........................................150

5190-2520 ..........................................427 687975-902 ........................................229 726975-902 ...............................243, 276 8001-0406 ..........................................150
5190-2521 ..........................................427 689775-902 ........................................229 727700-902 ...............................243, 277 8001-0501 ..........................................151
5190-2522 ..........................................427 689775-906 ........................................229 727975-302 ...............................243, 277 8001-0502 ..........................................151
5190-2523 ..........................................427 689775-914 ........................................229 727975-902 ...............................243, 276 8001-0503 ..........................................151
5190-2524 ..........................................427 689975-302 ........................................229 728700-902 ...............................243, 277 8001-0504 ..........................................151
5190-2525 ..........................................427 689975-306 ........................................229 728975-302 ...............................243, 277 8001-0506 ..........................................152
5190-2526 ..........................................427 689975-314 ........................................229 728975-902 ...............................243, 276 8001-0509 ..........................................154
5190-2527 ..........................................427 689975-902 ........................................229 735700-902 ........................................277 8001-0510 ..........................................152
5190-2528 ..........................................427 689975-906 ........................................229 735953-902 ........................................276 8001-0511 ..........................................152
5190-2529 ..........................................427 689975-914 ........................................229 735954-302 ........................................276 8001-0512 ..........................................152
5190-2530 ..........................................427 691775-902 ........................................229 746450-902 ........................................276 8001-0513 ..........................................152
5190-2531 ..........................................427 691775-906 ........................................229 75400001............................................349 8001-0514 ..........................................151
5190-2532 ..........................................427 691975-302 ........................................229 75700001............................................349 8001-0515 ..........................................151
5190-2533 ..........................................427 691975-306 ........................................229 7571901C ...........................................349 8001-0516 ..........................................152
5190-2534 ..........................................427 691975-902 ........................................229 75719025............................................349 8001-0517 ..........................................154
5190-2535 ..........................................427 691975-906 ........................................229 75719050............................................349 8001-0519 ..........................................152
5190-2536 ..........................................427 693768-901 ........................................229 7572915B ...........................................349 8001-0520 ..........................................152
5190-2537 ..........................................427 693775-901 ........................................325 7572915C ...........................................349 8001-0521 ..........................................152
5190-2538 ..........................................427 693775-902 ...............................229, 386 7573915B ...........................................349 8001-0522 ..........................................151
5190-2539 ..........................................427 693775-906 ........................................229 7573915C ...........................................349 8001-0527 ..........................................152
5190-2540 ..........................................427 693775-912 ........................................229 757700-302 ...............................238, 277 8001-0528 ..........................................152
5190-2541 ..........................................427 693968-301 ........................................229 757700-902 ...............................238, 277 8001-0529 ..........................................152
5190-2542 ..........................................427 693968-901 ........................................229 758700-302 ...............................238, 277 8001-0530 ..........................................152
5190-2543 ..........................................427 693975-301 ........................................325 758700-902 ...............................238, 277 8001-0531 ..........................................152
5190-2544 ..........................................427 693975-302 ...............................229, 386 759700-302 ........................................238 8001-0532 ..........................................152
5190-2545 ..........................................427 693975-306 ........................................229 759700-902 ...............................238, 277 8001-0533 ..........................................151
520518-904 ........................................305 693975-312 ........................................229 760450-902 ........................................277 8001-0534 ..........................................151
520518-905 ........................................305 693975-901 ........................................325 761600-902 ........................................277 8001-0535 ..........................................152
588905-902 ........................................305 693975-902 ...............................229, 386 761753-902 ........................................277 8001-0601 ..........................................153
588915-902 ........................................305 693975-906 ........................................229 761775-902 ........................................379 8001-0603 ..........................................153
588925-902 ........................................305 693975-912 ........................................229 761973-902 ........................................379 8001-0604 ..........................................153
588935-902 ........................................305 695768-901 ........................................229 763600-902 ........................................277 8001-0607 ..........................................153
590-3003.............................................200 695775-901 ........................................325 763750-902 ........................................379 8001-0608 ..........................................153
590-4000....................................177, 197 695775-902 ...............................229, 386 763953-902 ........................................276 8001-0609 ..........................................153
590-4001....................................177, 197 695775-906 ........................................229 763954-302 ........................................276 8001-0610 ..........................................154
590-4005....................................177, 197 695775-912 ........................................229 763973-902 ........................................379 8001-0612 ..........................................153
59980-20134......................................107 695968-301 ........................................229 764953-302 ........................................276 8001-0613 ..........................................153
59987-20033......................................107 695968-901 ........................................229 764953-902 ........................................276 8001-0614 ..........................................153
59987-20040......................................105 695975-302 ...............................229, 386 765600-902 ........................................277 8001-0615 ..........................................152
6040-0798 ..........................................107 695975-306 ........................................229 765750-902 ........................................379 8001-0701 ..........................................150
6040-0834..................................104, 107 695975-312 ........................................229 765973-902 ........................................379 8001-0702 ..........................................150
660750-902 ...............................210, 384 695975-901 ........................................325 766953-902 ........................................276 8001-0703 ..........................................150
660750-906 ........................................384 695975-902 ......................210, 229, 386 770050-902 ...............................277, 318 8001-0704 ..........................................150
660750-909 ........................................384 695975-906 ........................................229 770100-902 ...............................277, 318 8001-0705 ..........................................150
661750-902 ...............................384, 463 695975-912 ........................................229 770150-902 ...............................277, 318 8001-0801 ..........................................153
661750-906 ...............................384, 463 697775-902 ........................................229 770450-302 ........................................276 8001-0802 ..........................................153
661750-909 ...............................384, 463 697775-906 ........................................229 770450-902 ........................................276 8001-0803 ..........................................155
670750-902 ........................................384 697975-302 ........................................229 770995-902 ........................................379 8001-0805 ..........................................155
671750-902 ...............................384, 463 697975-306 ........................................229 773450-302 ........................................276 8001-0806 ..........................................155
681775-902 ........................................229 697975-902 ...............................210, 229 773450-902 ........................................276 8001-0807 ..........................................155
681975-302 ........................................229 697975-906 ........................................229 773700-902 ........................................277 8001-0808 ..........................................156
681975-902 ........................................229 699768-901 ........................................229 773995-902 ........................................379 8001-0809 ..........................................153
683775-902 ...............................229, 386 699775-901 ........................................325 79835-87638 ........................................29 8001-0810 ..........................................154
683775-906 ........................................229 699775-902 ........................................229 79841-87610 ........................................27 8001-0812 ..........................................153
683775-914 ........................................229 699775-906 ........................................229 7995108-344......................................262 8001-0813 ..........................................155
683975-302 ...............................229, 386 699775-912 ........................................229 7995108-585......................................262 8001-0814 ..........................................153
683975-306 ........................................229 699968-301 ........................................229 7995108-595......................................262 8001-0816 ..........................................155
683975-314 ........................................229 699968-901 ........................................229 7995118-344......................................262 8001-0817 ..........................................155
683975-902 ...............................229, 386 699975-301 ........................................325 7995118-504 .............................262, 270 8001-0818 ..........................................154
683975-906 ........................................229 699975-302 ........................................229 7995118-585......................................262 8001-0819 ..........................................155
683975-914 ........................................229 699975-306 ........................................229 7995118-595......................................262 8001-0821 ..........................................154
685775-902 ...............................229, 386 699975-312 ........................................229 7995208-344......................................270 8001-0822 ..........................................154
685775-906 ........................................229 699975-901 ........................................325 7995208-585......................................270 8001-0823 ..........................................155
685775-914 ........................................229 699975-902 ........................................229 7995208-595......................................270 8001-0824 ..........................................155
685975-302 ...............................229, 386 699975-906 ........................................229 7995218-344......................................270 8001-8020 ..........................................154
685975-306 ........................................229 699975-912 ........................................229 7995218-585..............................270-271 8002-0401 ..........................................157
685975-314 ........................................229 722975-902 ........................................245 7995218-595......................................270 8002-0402 ..........................................157
685975-902 ...............................229, 386 724700-902 ...............................243, 277 7995230-344......................................262 8002-0403 ..........................................157
685975-906 ........................................229 724975-302 ...............................243, 277 8001-0401 ..........................................150 8002-0404 ..........................................157
685975-914 ........................................229 724975-902 ...............................243, 276 8001-0402 ..........................................150 8002-0405 ..........................................157
687775-902 ........................................229 726700-902 ...............................243, 277 8001-0403 ..........................................150 8002-0406 ..........................................157
PART NUMBER INDEX
8002-0407 ..........................................157 8002-0917 ..........................................161 8005-0911 ..........................................145 820950-908 ........................................330

8002-0408 ..........................................157 8002-0918 ..........................................162 8005-0912 ..........................................145 820950-911 ........................................433
8002-0412 ..........................................157 8002-0919 ..........................................162 8005-0913 ..........................................144 820950-912 ........................................283
8002-0413 ..........................................157 8002-0921 ..........................................168 8005-0914 ..........................................146 820950-913 ........................................273
8002-0414 ..........................................157 8002-0923 ..........................................164 8005-0915 ..........................................144 820950-914 ........................................273
8002-0415 ..........................................157 8002-0924 ..........................................164 8005-0916 ..........................................144 820950-915 ........................................269
8002-0501 ..........................................158 8005-0414 ..........................................138 8005-0925 ..........................................145 820950-916 ........................................269
8002-0502 ..........................................158 8005-0416 ..........................................138 8005-0926 ..........................................145 820950-917 ........................................269
8002-0515 ..........................................158 8005-0417 ..........................................138 8005-0927 ..........................................146 820950-918 ........................................372
8002-0516 ..........................................159 8005-0418 ..........................................138 8005-0928 ..........................................144 820950-919 ........................................329
8002-0517 ..........................................159 8005-0419 ..........................................138 8005-0929 ..........................................145 820950-920 ........................................269
8002-0601 ..........................................158 8005-0420 ..........................................138 8005-0930 ..........................................144 820950-921 ........................................372
8002-0602 ..........................................159 8005-0422 ..........................................138 8010-0440 ..........................................169 820950-922 ........................................269
8002-0603 ..........................................159 8005-0423 ..........................................138 8010-0441..................................137, 169 820950-923 ........................................372
8002-0604 ..........................................159 8005-0508 ..........................................141 8010-0442..................................137, 169 820950-924 ...............................283, 372
8002-0605 ..........................................159 8005-0512 ..........................................142 8010-0443..................................137, 169 820950-925 ........................................261
8002-0607 ..........................................159 8005-0513 ..........................................141 8010-0444..................................137, 169 820950-926 ........................................261
8002-0608 ..........................................159 8005-0514 ..........................................139 8010-0445..................................137, 169 820950-927 ........................................261
8002-0610 ..........................................165 8005-0515 ..........................................140 8010-0446..................................137, 169 820950-928 ........................................282
8002-0611 ..........................................165 8005-0516 ..........................................140 8010-0448..................................137, 169 820950-930 ........................................277
8002-0701 ..........................................157 8005-0523 ..........................................140 8010-0449 ..........................................169 820950-931 ........................................394
8002-0702 ..........................................157 8005-0524 ..........................................141 8010-0450..................................137, 169 820950-932 ........................................379
8002-0703 ..........................................157 8005-0525 ..........................................141 8010-0455..................................137, 169 820950-933 ........................................269
8002-0704 ..........................................157 8005-0526 ..........................................141 8010-0456..................................137, 169 820950-935 ...............................261, 329
8002-0705 ..........................................157 8005-0527 ..........................................140 8010-0457..................................137, 169 820950-936 ........................................253
8002-0706 ..........................................157 8005-0528..................................142, 145 8010-0458..................................137, 169 820950-937 ........................................253
8002-0802 ..........................................168 8005-0529 ..........................................140 8010-0459..................................137, 169 820950-938 ........................................253
8002-0803 ..........................................168 8005-0530 ..........................................140 8010-0460..................................137, 169 820950-939 ...............................253, 255
8002-0805 ..........................................168 8005-0531 ..........................................140 8010-0467..................................137, 169 820999-901 ............225, 253, 255, 261,
8002-0806 ..........................................168 8005-0532 ..........................................142 8010-0468..................................137, 169 269, 273, 277, 282-283,
8002-0808 ..........................................158 8005-0533 ..........................................140 820212-911 ........................................433 305, 329-330, 334, 372,
8002-0809 ..........................................158 8005-0535 ..........................................139 820212-914 ...............................273, 318 379, 384, 394, 433
8002-0810 ..........................................158 8005-0536 ..........................................139 820212-915 ......................269, 273, 317 821075-918 ........................................384
8002-0811 ..........................................160 8005-0537 ..........................................141 820212-918 ......................317, 373, 466 821075-920 ........................................384
8002-0815 ..........................................167 8005-0538 ..........................................139 820212-919 ...............................318, 329 821075-924 ........................................384
8002-0816 ..........................................167 8005-0539 ..........................................140 820212-920 ...............................269, 317 821125-915 ...............................269, 273
8002-0817 ..........................................167 8005-0540 ..........................................140 820212-921 ......................317, 373, 466 821125-918 ........................................372
8002-0818 ..........................................166 8005-0541 ..........................................139 820212-924 ......................317, 373, 466 821125-919 ........................................329
8002-0819 ..........................................166 8005-0601 ..........................................142 820212-925 ...............................261, 318 821125-924 ...............................269, 372
8002-0820 ..........................................166 8005-0602 ..........................................142 820212-926 ...............................261, 318 821125-926 ........................................261
8002-0821 ..........................................166 8005-0603 ..........................................142 820212-928 ...............................282, 318 821125-928 ........................................282
8002-0822 ..........................................166 8005-0604 ..........................................142 820212-930 ...............................277, 318 821125-930 ........................................277
8002-0823 ..........................................166 8005-0605 ..........................................142 820212-933 ...............................269, 317 821125-932 ........................................379
8002-0824 ..........................................166 8005-0702 ..........................................137 820385-901 ........................................318 821125-933 ........................................269
8002-0825 ..........................................166 8005-0704 ..........................................137 820400-901 ............261, 269, 273, 277, 821125-935 ...............................261, 329
8002-0826 ..........................................166 8005-0705 ..........................................137 282-283, 313, 317-318, 821125-936 ........................................253
8002-0831 ..........................................166 8005-0812 ..........................................148 329-330, 373, 433, 466 821125-937 ........................................253
8002-0832 ..........................................166 8005-0822 ..........................................148 820444-901 ............261, 269, 273, 277, 821125-938 ........................................253
8002-0833 ..........................................166 8005-0823 ..........................................148 282, 313, 317-318, 821125-939 ...............................253, 255
8002-0834 ..........................................166 8005-0824 ..........................................148 329-330, 373, 433, 466 821700-902 ...............................245, 270
8002-0835 ..........................................167 8005-0825 ..........................................148 820555-901 ......................245, 263, 270 821700-932 ...............................245, 270
8002-0837 ..........................................166 8005-0826 ..........................................148 820675-111 ...............................330, 433 821725-901 .............238, 243, 246, 253
8002-0856 ..........................................160 8005-0835 ..................................148-149 820675-112 ........................................261 821725-902 .............238, 244, 246, 269
8002-0857 ..........................................160 8005-0836 ..........................................149 820675-115 ......................269, 273, 283 821725-903 .............238, 243, 246, 261
8002-0858 ..........................................160 8005-0837 ..........................................149 820675-119 ................................329-330 821725-904 .............238, 244, 246, 269
8002-0859 ..........................................160 8005-0838.........................143, 149, 156 820675-124 ......................269, 283, 372 821725-911 ...............................229, 246
8002-0860 ..........................................160 8005-0839 ..........................................143 820700-902 ...............................244, 269 821725-912 ...............................229, 246
8002-0901 ..........................................164 8005-0840 ..........................................143 820700-905 ...............................244, 269 821725-913 ...............................229, 246
8002-0902 ..........................................164 8005-0841 ..........................................143 820700-906 ...............................244, 269 821725-914 ...............................229, 246
8002-0903 ..........................................164 8005-0842 ..........................................143 820700-912 ...............................244, 269 821975-902 ...............................245, 270
8002-0904 ..........................................163 8005-0843 ..........................................143 820750-901 ......................243, 246, 252 821975-932 ...............................245, 270
8002-0905 ..........................................164 8005-0844 ..........................................143 820750-902 ......................244, 246, 267 822700-902 ........................................270
8002-0906 ..........................................163 8005-0845 ..........................................143 820750-903 ......................243, 246, 260 822700-932 ........................................270
8002-0907 ..........................................161 8005-0846 ..........................................143 820750-904 ......................244, 246, 267 822975-902 .......................244-245, 270
8002-0908 ..........................................161 8005-0901 ..........................................146 820750-911 ...............................229, 246 822975-906 ...............................245, 270
8002-0909 ..........................................162 8005-0902 ..........................................146 820750-912 ...............................229, 246 822975-932 ........................................270
8002-0910 ..........................................162 8005-0903 ..........................................146 820750-913 ...............................229, 246 823700-902 ...............................245, 270
8002-0911 ..........................................161 8005-0904 ..........................................146 820750-914 ...............................229, 246 823700-932 ...............................245, 270
8002-0912 ..........................................162 8005-0905 ..........................................147 820950-901 ........................................330 823750-901 .............238, 243, 246, 253
8002-0913 ..........................................163 8005-0906 ..........................................147 820950-902 ........................................283 823750-902 .............238, 244, 246, 268
8002-0915 ..........................................165 8005-0907 ..........................................146 820950-905 ...............................283, 330 823750-903 .............238, 243, 246, 260
8002-0916 ..........................................165 8005-0908 ..........................................147 820950-906 ........................................283 823750-904 .............238, 244, 246, 268
650
PART NUMBER INDEX
823750-911 ...............................229, 246 829975-302 ...............................244, 268 858700-314 ........................................238 863750-906 ........................................372
823750-912 ...............................229, 246 829975-305 ...............................244, 268 858700-902 ...............................238, 268 863953-902 ........................................267
823750-913 ...............................229, 246 829975-306 ...............................244, 268 858700-905 ...............................238, 268 863953-905 ........................................267
823750-914 ...............................229, 246 829975-312 ...............................244, 268 858700-906 ...............................238, 268 863953-906 ........................................267
823975-902 ...............................245, 270 829975-902 ...............................244, 267 858700-912 ...............................238, 268 863953-912 ........................................267
823975-932 ...............................245, 270 829975-905 ...............................244, 267 858700-914 ........................................238 863953-914 ........................................267
824700-902 ...............................244, 269 829975-906 ...............................244, 267 858750-902 ........................................372 863954-302 ........................................267
824700-905 ...............................244, 269 829975-912 ...............................244, 267 858750-906 ........................................372 863954-305 ........................................267
824700-906 ...............................244, 269 829975-914 ...............................244, 267 858750-909 ........................................372 863954-306 ........................................267
824700-912 ...............................244, 269 830668-901 ...............................244, 281 858750-944 .......................372, 374-375 863954-312 ........................................267
824700-914 ...............................244, 269 830975-906 ...............................244, 267 858768-901 ...............................238, 281 863954-314 ........................................267
824975-302 ...............................244, 268 830990-902 ........................................268 859700-302 ...............................238, 268 863967-302 ........................................273
824975-305 ...............................244, 268 830990-906 ........................................268 859700-306 ...............................238, 268 863967-902 ........................................273
824975-306 ...............................244, 268 830990-914 ........................................268 859700-902 ...............................238, 268 863973-902 ...............................210, 372
824975-902 ...............................244, 267 831975-902 ........................................270 859700-905 ...............................238, 268 863973-905 ........................................372
824975-905 ...............................244, 267 831975-906 ........................................270 859700-906 ...............................238, 268 863973-906 ........................................372
824975-906 ...............................244, 267 831975-932 ........................................270 859700-912 ...............................238, 268 863973-909 ........................................372
824975-912 ...............................244, 267 831975-936 ........................................270 859700-914 ........................................238 863974-302 ........................................372
824975-914 ...............................244, 267 832975-902 ........................................267 859768-901 ...............................238, 281 863974-306 ........................................372
825700-902 ...............................245, 270 832975-906 ........................................267 860700-304 ........................................334 863974-309 ........................................372
825700-932 ...............................245, 270 833975-902 ........................................270 860700-704 ........................................334 864668-301 ........................................281
825975-902 ...............................245, 270 833975-906 ........................................270 860700-708 ........................................330 864668-901 ........................................281
825975-932 ...............................245, 270 833975-912 ........................................270 860950-902 ........................................372 865600-902 ........................................269
826700-902 ...............................244, 269 833975-932 ........................................270 860950-905 ........................................372 865600-906 ........................................269
826700-906 ...............................244, 269 833975-936 ........................................270 860950-906 ........................................372 865608-901 ........................................282
826975-302 ...............................244, 268 834975-902 ........................................267 860950-909 ........................................372 865630-902 ...............................372, 463
826975-306 ...............................244, 268 834975-906 ........................................267 860975-902 ........................................268 865630-906 ...............................372, 463
826975-902 ...............................244, 267 835668-901 ........................................281 860975-905 ........................................268 865750-902 ........................................372
826975-906 ...............................244, 267 835975-902 ........................................267 860975-906 ........................................268 865750-906 ........................................372
827668-301 ...............................244, 281 835975-905 ........................................267 860975-909 ........................................268 865973-902 ...............................210, 372
827668-901 ...............................244, 281 835975-906 ........................................267 860975-912 ........................................268 865973-905 ........................................372
827700-901 ...............................244, 329 835975-912 ........................................267 860975-914 ........................................268 865973-906 ........................................372
827700-902 ...............................244, 269 835975-914 ........................................267 861600-902 ........................................269 865973-909 ........................................372
827700-905 ...............................244, 269 840140-901 ............261, 269, 273, 283, 861600-906 ........................................269 8660-0827 ..........................................108
827700-906 ...............................244, 269 329-330, 372, 433 861608-901 ........................................282 866668-901 ........................................281
827700-912 ...............................244, 269 840300-908 ........................................330 861630-902 ...............................372, 463 866735-902 ........................................268
827700-914 ...............................244, 269 843300-908 ........................................330 861700-901 ........................................282 866953-302 ........................................267
827768-901 ...............................244, 282 846952-704 ........................................334 861753-902 ........................................268 866953-902 ........................................267
827975-301 ...............................244, 329 846975-202 ........................................267 861753-905 ........................................268 866953-905 ........................................267
827975-302 ...............................244, 268 846975-902 ........................................267 861753-906 ........................................268 866953-906 ........................................267
827975-305 ...............................244, 268 846975-906 ........................................267 861753-912 ........................................268 866953-912 ........................................267
827975-306 ...............................244, 268 846975-914 ........................................267 861753-914 ........................................268 866953-914 ........................................267
827975-312 ...............................244, 268 8500-1867 ..........................................107 861767-902 ........................................273 866967-902 ........................................273
827975-314 ...............................244, 268 8500-2236 ..........................................107 861768-901 ........................................282 868050-901 ...............................282, 318
827975-901 ........................................244 8500-4410 ..........................................195 861775-902 ........................................372 868100-901 ...............................282, 318
827975-902 ......................244, 267, 329 8500-6762.............................................15 861775-906 ........................................372 868150-901 ...............................282, 318
827975-905 ...............................244, 267 8500-6782 ..........................................196 861953-902 ........................................267 870050-902 ...............................269, 317
827975-906 ...............................244, 267 8500-6785 ..........................................174 861953-905 ........................................267 870050-906 ...............................269, 317
827975-912 ...............................244, 267 8500-6786 ..........................................197 861953-906 ........................................267 870050-914 ...............................269, 317
827975-914 ...............................244, 267 8500-6787 ..........................................197 861953-912 ........................................267 870100-902 ...............................269, 317
828668-301 ...............................244, 281 8500-6797 ..........................................172 861953-914 ........................................267 870100-906 ...............................269, 317
828668-901 ...............................244, 281 8500-6900 ..........................................174 861954-302 ........................................267 870100-914 ...............................269, 317
828700-901 ...............................244, 329 8500-6917 ..........................................110 861954-305 ........................................267 870150-902 ...............................269, 317
828700-902 ...............................244, 269 857700-302 ...............................238, 268 861954-306 ........................................267 870150-906 ...............................269, 317
828700-905 ...............................244, 269 857700-305 ...............................238, 268 861954-309 ........................................267 870150-914 ...............................269, 317
828700-906 ...............................244, 269 857700-306 ...............................238, 268 861954-312 ........................................267 8710-0004 ..........................................108
828700-912 ...............................244, 269 857700-312 ...............................238, 268 861954-314 ........................................267 8710-0510....................................99, 108
828700-914 ...............................244, 269 857700-314 ........................................238 861967-302 ........................................273 8710-0806 ..........................................108
828768-901 ...............................244, 282 857700-902 ...............................238, 268 861967-902 ........................................273 8710-1534.............................................95
828975-301 ...............................244, 329 857700-905 ...............................238, 268 861971-901 ........................................281 8710-1615 ..........................................108
828975-302 ...............................244, 268 857700-906 ...............................238, 268 861973-306 ........................................372 8710-1622 ..........................................108
828975-305 ...............................244, 268 857700-912 ...............................238, 268 861973-902 ........................................372 8710-1924......................................11, 48
828975-306 ...............................244, 268 857700-914 ........................................238 861973-906 ........................................372 8710-1930 ......................11, 35, 58, 108
828975-309 ........................................268 857750-902 ........................................372 863600-902 ........................................269 8710-1931......................................11, 35
828975-312 ...............................244, 268 857750-906 ........................................372 863600-905 ........................................269 8710-2699 ..........................................108
828975-314 ...............................244, 268 857750-909 ........................................372 863600-906 ........................................269 871700-902 ........................................268
828975-901 ...............................244, 329 857750-944 ...............................372, 375 863608-901 ........................................282 871700-906 ........................................268
828975-902 ...............................244, 267 857768-901 ...............................238, 281 863630-902 ...............................372, 463 871700-914 ........................................268
828975-905 ...............................244, 267 858700-302 ...............................238, 268 863630-906 ...............................372, 463 872700-902 ........................................268
828975-906 ...............................244, 267 858700-305 ...............................238, 268 863668-301 ........................................281 872700-906 ........................................268
828975-912 ...............................244, 267 858700-306 ...............................238, 268 863668-901 ........................................281 873700-902 ........................................270
828975-914 ...............................244, 267 858700-312 ........................................268 863700-901 ........................................282 873700-906 ........................................270
PART NUMBER INDEX
873700-932 ........................................270 880995-206 ........................................372 895150-909 ......................317, 373, 466 933975-902 ........................................262
873700-936 ........................................270 880995-209 ........................................372 897150-102 ......................317, 373, 466 933975-906 ........................................262
874700-902 ........................................268 880995-902 ........................................372 897150-106 ......................317, 373, 466 933975-932 ........................................262
874700-906 ........................................268 880995-905 ........................................372 897150-109 ......................317, 373, 466 933975-936 ........................................262
875700-902 ........................................270 880995-906 ........................................372 897250-102 ......................317, 373, 466 934967-902 ........................................260
875700-906 ........................................270 880995-909 ........................................372 897250-105 ......................317, 373, 466 934967-906 ........................................260
875700-932 ........................................270 881750-902 ........................................372 897250-106 ......................317, 373, 466 935967-902 ........................................260
875700-936 ........................................270 883668-301 ........................................281 897250-109 ......................317, 373, 466 935967-906 ........................................260
877150-102 ...............................269, 317 883668-901 ........................................281 921700-902 ...............................245, 263 935967-912 ........................................260
877150-106 ...............................269, 317 883700-704 ........................................334 921700-932 ...............................245, 263 946975-902 ........................................260
877150-114 ...............................269, 317 883700-714 ........................................334 921975-902 ...............................245, 263 946975-906 ........................................260
877250-101 ...............................318, 329 883700-901 ........................................329 921975-932 ...............................245, 263 959701-902 ........................................253
877250-102 ...............................269, 317 883700-902 ........................................273 922700-902 ...............................245, 262 959701-906 ........................................253
877250-105 ...............................269, 317 883700-905 ........................................268 922700-932 ...............................245, 262 959701-912 ........................................253
877250-106 ...............................269, 317 883700-906 ........................................268 922975-902 ......................243, 245, 262 959701-918 ...............................253, 255
877250-112 ...............................269, 317 883700-909 ........................................268 922975-906 ...............................245, 262 959731-902 ...............................243, 253
877250-114 ...............................269, 317 883700-912 ........................................268 922975-932 ...............................245, 262 959731-906 ...............................243, 253
877952-101 ...............................317, 330 883700-922 ........................................268 923700-902 ...............................245, 263 959731-912 ...............................243, 253
877952-102 ...............................283, 317 883725-901 ........................................281 923700-932 ...............................245, 263 959733-902 ........................................253
877952-105 ......................283, 317, 330 883750-902 ........................................372 923975-902 ...............................245, 262 959733-906 ........................................253
877952-106 ...............................283, 317 883750-905 ........................................372 923975-932 ...............................245, 262 959733-912 ........................................253
877952-108 ...............................317, 330 883750-906 ........................................372 924700-902 ...............................243, 261 959741-902 ...............................243, 253
877967-102 ...............................273, 318 883750-909 ........................................372 924700-906 ...............................243, 261 959741-906 ...............................243, 253
877974-901 ........................................433 883952-302 ........................................283 924975-302 ...............................243, 260 959741-912 ...............................243, 253
877974-910 ........................................433 883952-701 ........................................330 924975-306 ...............................243, 260 959741-918 ......................243, 253, 255
878150-101 ...............................282, 318 883952-702 ........................................283 924975-902 ...............................243, 260 959743-901 ........................................325
878250-101 ...............................282, 318 883952-703 ........................................334 924975-906 ...............................243, 260 959743-902 ........................................253
880668-301 ........................................281 883952-704 ........................................334 925700-902 ...............................245, 263 959743-906 ........................................253
880668-901 ........................................281 883952-705 ........................................330 925700-932 ...............................245, 263 959743-912 ........................................253
880952-201 ........................................330 883952-706 ........................................283 925975-902 ...............................245, 262 959746-902 ........................................253
880952-202 ........................................283 883952-708 ........................................330 925975-932 ...............................245, 262 959746-906 ........................................253
880952-203 ........................................334 883952-710 ........................................283 926700-902 ...............................243, 261 959757-301 ...............................238, 325
880952-204 ........................................334 883952-712 ........................................283 926700-906 ...............................243, 261 959757-302 ...............................238, 252
880952-205 ........................................330 883952-714 ........................................334 926975-302 ...............................243, 260 959757-306 ...............................238, 252
880952-206 ........................................283 883967-302 ........................................273 926975-306 ...............................243, 260 959757-312 ........................................238
880952-208 ........................................330 883967-901 ........................................273 926975-902 ...............................243, 260 959757-901 ...............................238, 325
880952-302 ........................................283 883967-902 ........................................273 926975-906 ...............................243, 260 959757-902 ......................210, 238, 253
880952-701 ........................................330 883975-202 ........................................267 927700-902 ...............................243, 261 959757-906 ...............................238, 253
880952-702 ........................................283 883975-302 ........................................267 927700-906 ...............................243, 261 959757-912 ........................................238
880952-703 ........................................334 883975-305 ........................................267 927975-302 ...............................243, 260 959758-301 ...............................238, 325
880952-704 ........................................334 883975-306 ........................................267 927975-306 ...............................243, 260 959758-302 ...............................238, 252
880952-705 ........................................330 883975-309 ........................................267 927975-902 ...............................243, 260 959758-306 ...............................238, 252
880952-706 ........................................283 883975-312 ........................................267 927975-906 ...............................243, 260 959758-312 ........................................238
880952-708 ........................................330 883975-314 ........................................267 928700-902 ...............................243, 261 959758-901 ...............................238, 325
880952-710 ........................................283 883975-901 ........................................329 928700-906 ...............................243, 261 959758-902 ...............................238, 253
880952-712 ........................................283 883975-902 ........................................267 928975-302 ...............................243, 260 959758-906 ...............................238, 253
880952-714 ........................................334 883975-905 ........................................267 928975-306 ........................................260 959758-912 ........................................238
880967-201 ...............................267, 273 883975-906 ........................................267 928975-902 ...............................243, 260 959759-302 ...............................238, 252
880967-202 ........................................273 883975-909 ........................................267 928975-906 ........................................260 959759-306 ...............................238, 252
880967-302 ........................................273 883975-912 ........................................267 9300-1747 ..........................................199 959759-901 ...............................238, 325
880967-901 ........................................273 883975-914 ........................................267 9300-1748 ..........................................199 959759-902 ...............................238, 253
880967-902 ........................................273 883995-902 ...............................210, 372 9301-0407.............................................99 959759-906 ...............................238, 253
880975-201 ........................................329 883995-905 ........................................372 9301-0656.............................................53 959759-912 ........................................238
880975-202 ........................................267 883995-906 ........................................372 9301-0722 ..........................................200 959763-902 ........................................253
880975-205 ........................................267 883995-909 ........................................372 9301-0895.............................................13 959763-906 ........................................253
880975-209 ........................................267 884950-507 ........................................283 9301-0978 ..........................................199 959763-912 ........................................253
880975-212 ........................................267 884950-526 ........................................283 9301-1291 ..........................................106 959764-902 ...............................243, 253
880975-302 ........................................267 884950-543 ........................................283 9301-1337.............................................58 959764-906 ...............................243, 253
880975-305 ........................................267 884950-567 ........................................267 9301-1420.............................................53 959764-912 ...............................243, 253
880975-306 ........................................267 884950-577 ........................................281 9301-1421.............................................53 959764-918 ......................243, 253, 255
880975-309 ........................................267 884973-701 ........................................433 9301-1446.............................................99 959790-918 ...............................253, 255
880975-312 ........................................267 884973-901 ........................................433 9301-1450.............................................53 959793-901 ........................................325
880975-314 ........................................267 884973-902 ........................................433 9301-6341.............................................53 959793-902 ........................................253
880975-901 ........................................329 884975-202 ........................................267 9301-6342.............................................53 959793-906 ........................................253
880975-902 ........................................267 895050-902 ......................317, 373, 466 930990-902 ........................................260 959793-912 ........................................253
880975-905 ........................................267 895050-906 ......................317, 373, 466 930990-906 ........................................260 959793-918 ...............................253, 255
880975-906 ........................................267 895050-909 ......................317, 373, 466 931975-902 ........................................262 959794-902 ........................................243
880975-909 ........................................267 895100-902 ......................317, 373, 466 931975-906 ........................................262 959931-902 ...............................243, 252
880975-912 ........................................267 895100-906 ......................317, 373, 466 931975-932 ........................................262 959931-906 ...............................243, 252
880975-914 ........................................267 895100-909 ......................317, 373, 466 931975-936 ........................................262 959931-912 ...............................243, 252
880995-202 ........................................372 895150-902 ......................317, 373, 466 932967-902 ........................................260 959931-918 ......................243, 252, 255
880995-205 ........................................372 895150-906 ......................317, 373, 466 932967-906 ........................................260 959933-902 ........................................252
652
PART NUMBER INDEX
959933-906 ........................................252 961967-905 ........................................260 993967-905 ...............................260, 329 A2001150X046..................................300

959933-912 ........................................252 961967-906 ........................................260 993967-906 ........................................260 A2001200X030..................................301
959936-902 ........................................252 963400-902 ........................................394 993967-912 ........................................260 A2001250C046..................................302
959936-906 ........................................252 963600-902 ........................................261 A2000020X020..................................301 A2001250X020..................................301
959936-912 ........................................252 963600-906 ........................................261 A2000030X020..................................301 A2001250X030..................................301
959941-302 ...............................243, 252 963954-302 ........................................260 A2000030X046..................................300 A2001250X046..................................300
959941-306 ...............................243, 252 963954-305 ........................................260 A2000050X020..................................301 A2001MG...........................................303
959941-312 ...............................243, 252 963954-306 ........................................260 A2000050X030..................................301 A2001MG1.........................................303
959941-902 ...............................243, 252 963954-312 ........................................260 A2000050X046..................................300 A2002250X046..................................300
959941-906 ...............................243, 252 963967-902 ........................................260 A2000100C020..................................302 A2002250X212.........................300, 321
959941-912 ...............................243, 252 963967-905 ........................................260 A2000100C030..................................302 A2002250X500..................................300
959941-918 ......................243, 252, 255 963967-906 ........................................260 A2000100C046..................................302 A2002MG...........................................303
959943-901 ........................................325 963967-912 ........................................260 A2000100R030..................................302 A2003020X020.........................301, 332
959943-902 ........................................252 965600-902 ........................................261 A2000100R046..................................302 A2003030X020.........................301, 332
959943-906 ........................................252 965600-906 ........................................261 A2000100T030..................................302 A2003050X020.........................301, 332
959943-912 ........................................252 966400-902 ........................................394 A2000100T046..................................302 A2003050X030.........................301, 332
959943-918 ...............................252, 255 966735-902 ........................................261 A2000100X020..................................301 A2003050X046.........................300, 332
959946-902 ........................................252 966954-302 ........................................260 A2000100X030..................................301 A2003050X212.........................300, 331
959946-906 ........................................252 966967-902 ........................................260 A2000100X046..................................300 A2003100X020.........................301, 332
959951-902 ...............................243, 252 966967-905 ........................................260 A2000100X212..................................300 A2003100X030.........................301, 332
959961-302 ........................................252 966967-906 ........................................260 A2000100X300..................................300 A2003100X046.........................300, 332
959961-306 ........................................252 966967-912 ........................................260 A2000125X040..................................301 A2003125X040.........................301, 332
959961-312 ........................................252 970050-902 ...............................261, 318 A2000150C046..................................302 A2003150X020.........................301, 332
959961-901 ........................................325 970050-906 ...............................261, 318 A2000150R030..................................302 A2003150X030.........................301, 332
959961-902 ........................................252 970100-902 ...............................261, 318 A2000150R046..................................302 A2003150X040.........................301, 332
959961-906 ........................................252 970100-906 ...............................261, 318 A2000150T030..................................302 A2003150X046.................300, 331-332
959961-912 ........................................252 970150-902 ...............................261, 318 A2000150T046..................................302 A2003250X020.........................301, 332
959961-918 ...............................252, 255 970150-906 ...............................261, 318 A2000150X020..................................301 A2003250X030.........................301, 332
959963-302 ........................................252 971700-902 ........................................261 A2000150X030..................................301 A2003250X040.........................301, 332
959963-306 ........................................252 971700-906 ........................................261 A2000150X040..................................301 A2003250X046.........................300, 332
959963-312 ........................................252 972700-902 ........................................261 A2000150X046..................................300 A2003250X212................300, 321, 331
959963-902 ...............................210, 252 972700-906 ........................................261 A2000150X212..................................300 A2003MG..................................303, 332
959963-906 ........................................252 973700-902 ........................................262 A2000200X046..................................300 A2003MG2................................303, 332
959963-912 ........................................252 973700-906 ........................................262 A2000250C030..................................302 A2004250X212................300, 321, 331
959963-918 ...............................252, 255 973700-932 ........................................262 A2000250C046..................................302 A2004250X500.........................300, 331
959964-302 ...............................243, 252 973700-936 ........................................262 A2000250R046..................................302 A2004MG..................................303, 332
959964-306 ...............................243, 252 974700-902 ........................................261 A2000250T046..................................302 A2004MG2................................303, 332
959964-312 ...............................243, 252 974700-906 ........................................261 A2000250X020..................................301 A2005020X020.........................301, 332
959964-902 ...............................243, 252 975700-902 ........................................262 A2000250X030..................................301 A2005030X020.........................301, 332
959964-906 ...............................243, 252 975700-906 ........................................262 A2000250X040..................................301 A2005050X020.........................301, 332
959964-912 ...............................243, 252 975700-932 ........................................262 A2000250X046..................................300 A2005050X030.........................301, 332
959964-918 ......................243, 252, 255 975700-936 ........................................262 A2000250X100.........................300, 321 A2005050X046.........................301, 332
959990-318 ...............................252, 255 977150-102 ...............................261, 318 A2000250X212.........................300, 321 A2005100X020.........................301, 332
959990-902 ........................................252 977150-106 ...............................261, 318 A2000MG...........................................303 A2005100X030.........................301, 332
959990-906 ........................................252 977250-102 ...............................261, 318 A2000MG2.........................................303 A2005100X046.........................300, 332
959990-912 ........................................252 977250-106 ...............................261, 318 A2001020X020..................................301 A2005150X020.........................301, 332
959990-918 ...............................252, 255 981757-302 ...............................238, 260 A2001030X020..................................301 A2005150X030.........................301, 332
959993-302 ........................................252 981757-902 ...............................238, 261 A2001030X030..................................301 A2005150X046.........................300, 332
959993-306 ........................................252 981758-302 ...............................238, 260 A2001030X046..................................301 A2005250X020.........................301, 332
959993-902 ........................................252 981758-902 ...............................238, 261 A2001050C020..................................302 A2005250X046.................300-301, 332
959993-906 ........................................252 981759-302 ...............................238, 260 A2001050R020..................................302 A2005MG..................................303, 332
959993-912 ........................................252 981759-902 ...............................238, 261 A2001050T020..................................302 A2005MG2................................303, 332
959993-918 ...............................252, 255 990967-202 ........................................260 A2001050X020..................................301 A2006030X020..................................301
959994-902 ........................................243 990967-206 ........................................260 A2001050X030..................................301 A2006050X020..................................301
959996-902 ........................................252 990967-302 ........................................260 A2001050X046..................................301 A2006050X046..................................300
959996-906 ........................................252 990967-305 ........................................260 A2001075X046..................................300 A2006100X020..................................301
959996-912 ........................................252 990967-306 ........................................260 A2001100C020..................................302 A2006100X030..................................301
959996-918 ...............................252, 255 990967-312 ........................................260 A2001100R030..................................302 A2006100X046..................................300
960967-902 ........................................260 990967-902 ........................................260 A2001100R046..................................302 A2006150X020..................................301
960967-905 ........................................260 990967-905 ...............................260, 329 A2001100T030..................................302 A2006150X030..................................301
960967-906 ........................................260 990967-906 ........................................260 A2001100T046..................................302 A2006150X046..................................300
960967-912 ........................................260 990967-912 ........................................260 A2001100X020..................................301 A2006250X020..................................301
961400-302 ........................................394 993400-902 ........................................394 A2001100X030..................................301 A2006250X030..................................301
961600-902 ........................................261 993700-902 ........................................260 A2001100X046..................................300 A2006250X046..................................300
961600-906 ........................................261 993700-905 ...............................260, 329 A2001150C020..................................302 A2006250X100.........................300, 321
961753-902 ........................................261 993700-906 ........................................260 A2001150C046..................................302 A2006250X212..................................300
961753-905 ........................................261 993700-912 ........................................260 A2001150R020..................................302 A2006MG...........................................303
961753-906 ........................................261 993967-302 ........................................260 A2001150R046..................................302 A2006MG2.........................................303
961967-302 ........................................260 993967-305 ........................................260 A2001150T020..................................302 A2007030X020..................................301
961967-306 ........................................260 993967-306 ........................................260 A2001150T046..................................302 A2007030X030..................................300
961967-312 ........................................260 993967-312 ........................................260 A2001150X020..................................301 A2007050X020..................................301
961967-902 ........................................260 993967-902 ........................................260 A2001150X030..................................301 A2007050X030..................................301
PART NUMBER INDEX
A2007050X046..................................301 A2014250X046.........................300, 332 A3000150T046..................................294 A3030250X046..................................291

A2007100X020..................................301 A2014MG..................................303, 332 A3000150X020..................................292 A3030250X100.........................291, 320
A2007100X030..................................301 A2014MG2................................303, 332 A3000150X030..................................291 A3030MG...........................................294
A2007100X046..................................300 A2020050X020..................................301 A3000150X039..................................291 A3030MG2.........................................294
A2007150X020..................................301 A2020050X046..................................300 A3000150X046..................................291 A3031030X020..................................292
A2007150X030..................................301 A2020100X030..................................301 A3000150X100..................................291 A3031050R020..................................294
A2007150X046..................................300 A2020125X040..................................301 A3000150X212..................................292 A3031050T020..................................294
A2007250X020..................................301 A2020150X020..................................301 A3000250C020..................................293 A3031050X020..................................292
A2007250X030..................................301 A2020150X030..................................301 A3000250C030..................................293 A3031100C046..................................293
A2007250X046..................................300 A2020150X040..................................301 A3000250C046..................................293 A3031100X020..................................292
A2007MG...........................................303 A2020150X046..................................300 A3000250X020..................................292 A3031100X046..................................291
A2007MG2.........................................303 A2020250X020..................................301 A3000250X030..................................291 A3031150C046..................................293
A2008250X100..................................300 A2020250X030..................................301 A3000250X040..................................291 A3031150R046..................................294
A2008250X212..................................300 A2020250X040..................................301 A3000250X046..................................291 A3031150T046..................................294
A2008MG2.........................................303 A2020250X046..................................300 A3000250X100.........................291, 320 A3031150X020..................................292
A2010050X020..................................301 A2020250X100.........................300, 321 A3000250X212..................................292 A3031150X046..................................291
A2010100X030..................................301 A2020250X212..................................300 A3000300X039..................................291 A3031250C046..................................293
A2010100X046..................................300 A2020MG...........................................303 A3000MG...........................................294 A3031250X046..................................291
A2010125X040..................................301 A2020MG2.........................................303 A3000MG1.........................................294 A3031MG...........................................294
A2010150X020..................................301 A2021050X020..................................301 A3000MG2.........................................294 A3031MG2.........................................294
A2010150X030..................................301 A2021050X030..................................301 A3001020X020..................................292 A3032100X046..................................291
A2010150X040..................................301 A2021050X046..................................301 A3001030X020..................................292 A3032150X046..................................291
A2010150X046..................................300 A2021050X100..................................300 A3001030X046..................................291 A3032250X046..................................291
A2010250X030..................................301 A2021075X020..................................301 A3001050C020..................................293 A3032250X100.........................291, 320
A2010250X040..................................301 A2021100X020..................................301 A3001050C046..................................293 A3032250X212.........................292, 320
A2010250X046..................................300 A2021150X020..................................301 A3001050R046..................................294 A3032250X500..................................292
A2010250X100..................................321 A2021150X030..................................301 A3001050T046..................................294 A3040030X020..................................292
A2010250X212.........................300, 321 A2021250X020..................................301 A3001050X020..................................292 A3040050X020..................................292
A2010MG...........................................303 A2021250X046..................................300 A3001050X030..................................292 A3040050X046..................................291
A2010MG2.........................................303 A2021MG...........................................303 A3001050X046..................................291 A3040100X020..................................292
A2011030X030..................................301 A2021MG2.........................................303 A3001100C020..................................293 A3040100X046..................................291
A2011050X020..................................301 A2030050X020..................................301 A3001100C030..................................293 A3040100X212..................................292
A2011075X046..................................300 A2030100X030..................................301 A3001100C046..................................293 A3040150X020..................................292
A2011100X046..................................300 A2030125X040..................................301 A3001100R030..................................294 A3040150X030..................................291
A2011150X020..................................301 A2030150X020..................................301 A3001100T030..................................294 A3040150X046..................................291
A2011150X046..................................300 A2030150X030..................................301 A3001100X020..................................292 A3040250X030..................................291
A2011250X020..................................301 A2030150X040..................................301 A3001100X030..................................291 A3040250X046..................................291
A2011MG...........................................303 A2030150X046..................................300 A3001100X046..................................291 A3040250X100..................................320
A2011MG2.........................................303 A2030250X020..................................301 A3001150C020..................................293 A3040MG...........................................294
A2013020X020.........................301, 332 A2030250X030..................................301 A3001150C030..................................293 A3040MG1.........................................294
A2013030X020.........................301, 332 A2030250X040..................................301 A3001150C046..................................293 A3040MG2.........................................294
A2013050X020.........................301, 332 A2030250X046..................................300 A3001150R030..................................294 A3041020X020..................................292
A2013050X046.........................300, 332 A2030250X100.........................300, 321 A3001150T030..................................294 A3041030X020..................................292
A2013100X020.........................301, 332 A2030250X212.........................300, 321 A3001150X020..................................292 A3041050X020..................................292
A2013100X030.........................301, 332 A2030MG...........................................303 A3001150X030..................................291 A3041050X030..................................292
A2013100X046.........................300, 332 A2031050X020..................................301 A3001150X046..................................291 A3041050X046..................................291
A2013125X040.........................301, 332 A2031050X030..................................301 A3001250X020..................................292 A3041100X020..................................292
A2013150X020.........................301, 332 A2031050X046..................................301 A3001250X030..................................291 A3041100X030..................................291
A2013150X030.........................301, 332 A2031100X020..................................301 A3001250X046..................................291 A3041100X046..................................291
A2013150X040.........................301, 332 A2031150X020..................................301 A3001MG...........................................294 A3041150X020..................................292
A2013150X046.........................300, 332 A2031250X020..................................301 A3001MG2.........................................294 A3041150X030..................................291
A2013250X020.........................301, 332 A2031250X046..................................300 A3002100X046..................................291 A3041150X046..................................291
A2013250X030.........................301, 332 A2031MG2.........................................303 A3002150X046..................................291 A3041200X020..................................292
A2013250X040.........................301, 332 A3000020X020..................................292 A3002150X212..................................292 A3041250X020..................................292
A2013250X046.........................300, 332 A3000030X020..................................292 A3002250X046..................................291 A3041250X046..................................291
A2013250X100................300, 321, 331 A3000050X020..................................292 A3002250X100..................................291 A3041MG...........................................294
A2013250X212................300, 321, 331 A3000050X046..................................291 A3002250X212..................................292 A3041MG1.........................................294
A2013MG..................................303, 332 A3000100C020..................................293 A3002250X500..................................292 A3041MG2.........................................294
A2013MG2................................303, 332 A3000100C030..................................293 A3002300X039..................................291 A3050020X020..................................292
A2014020X020.........................301, 332 A3000100C046..................................293 A3002MG...........................................294 A3050030X020..................................292
A2014030X020.........................301, 332 A3000100R030..................................294 A3002MG2.........................................294 A3050050X020..................................292
A2014050X020.........................301, 332 A3000100T030..................................294 A3030050X020..................................292 A3050050X046..................................291
A2014050X030.........................301, 332 A3000100X020..................................292 A3030100C046..................................293 A3050100X020..................................292
A2014050X046.........................301, 332 A3000100X030..................................291 A3030100X020..................................292 A3050100X030..................................291
A2014100X020.........................301, 332 A3000100X046..................................291 A3030100X046..................................291 A3050100X046..................................291
A2014100X030.........................301, 332 A3000125X040..................................291 A3030150C020..................................293 A3050150X030..................................291
A2014100X046.........................300, 332 A3000150C020..................................293 A3030150C046..................................293 A3050150X046..................................291
A2014150X020.........................301, 332 A3000150C030..................................293 A3030150R046..................................294 A3050150X100..................................291
A2014150X030.........................301, 332 A3000150C046..................................293 A3030150T046..................................294 A3050150X212..................................292
A2014150X046.........................300, 332 A3000150R030..................................294 A3030150X020..................................292 A3050250X046..................................291
A2014250X020.........................301, 332 A3000150R046..................................294 A3030150X046..................................291 A3050250X100.........................291, 320
A2014250X030.........................301, 332 A3000150T030..................................294 A3030250C046..................................293 A3050250X212..................................292
654
PART NUMBER INDEX
A3050MG...........................................294 A6004250X212................296, 320, 331 A7000100R030..................................294 G1313-27302........................................65

A3050MG2.........................................294 A6004250X300................296, 320, 331 A7000100T030..................................294 G1313-43204........................................63
A3051020X020..................................292 A6004250X500................296, 320, 331 A7000150C046..................................293 G1313-43216........................................35
A3051030X020..................................292 A6004MG...........................................297 A7000150R046..................................294 G1313-44510........................................65
A3051050X020..................................292 A6005050X020.........................296, 331 A7000150T046..................................294 G1313-44512........................................65
A3051050X030..................................292 A6005050X046.........................295, 331 A7000150X046..................................291 G1313-44513........................................65
A3051050X046..................................291 A6005100X046.........................295, 331 A7000250C046..................................293 G1313-60004........................................65
A3051100X020..................................292 A6006050X046.........................295, 331 A7000250R046..................................294 G1313-68709........................................66
A3051100X030..................................291 A6006100X021.........................296, 331 A7000250T046..................................294 G1313-68711........................................67
A3051100X046..................................291 A6006100X046.........................295, 331 A7000250X046..................................291 G1313-68719........................................66
A3051150X020..................................292 A6010050X020..................................296 A7000MG3.........................................297 G1313-68730........................................66
A3051150X030..................................291 A6010100X020..................................296 A7001100C046..................................293 G1313-87102........................................62
A3051150X046..................................291 A6010100X030..................................295 A7001100R030..................................294 G1313-87201........................................62
A3051250X046..................................291 A6010100X046..................................295 A7001100R046..................................294 G1313-87202........................................62
A3051MG...........................................294 A6010100X212..................................320 A7001100T030..................................294 G1313-87203........................................62
A3051MG2.........................................294 A6010150X020..................................296 A7001100T046..................................294 G1313-87300........................................34
A6000030X020..................................296 A6010150X030..................................295 A7001100X020..................................292 G1313-87303.................................32, 64
A6000030X212..................................296 A6010150X040..................................295 A7001100X030..................................291 G1313-87304.................................23, 82
A6000050X020..................................296 A6010150X046..................................295 A7001100X046..................................291 G1313-87305 ..........................23, 33, 82
A6000050X046..................................295 A6010150X212..................................320 A7001150C046..................................293 G1314-60081..................................91-92
A6000050X100..................................295 A6010250X030..................................295 A7001150R046..................................294 G1314-60082..................................91-92
A6000050X212.........................296, 320 A6010250X040..................................295 A7001150T046..................................294 G1314-60083..................................91-92
A6000050X300..................................296 A6010250X046..................................295 A7001MG3.........................................297 G1314-60086..................................91-92
A6000100X020..................................296 A6010250X300..................................320 A7501030X020..................................297 G1314-60087..................................91-92
A6000100X030..................................295 A6010MG...........................................297 A7501050X020..................................297 G1314-60100........................................90
A6000100X046..................................295 A6010MG2.........................................297 A7501100X020..................................297 G1314-60101........................................90
A6000100X212.........................296, 320 A6011050X020..................................296 A7501100X030..................................297 G1314-60182..................................91-92
A6000100X300.........................296, 320 A6011050X030..................................295 A7501150X020..................................297 G1314-60183..................................91-92
A6000150X020..................................296 A6011050X046..................................295 A7501150X030..................................297 G1314-60186..................................91-92
A6000150X030..................................295 A6011100X020..................................296 A7511030X020..................................297 G1314-60187..................................91-92
A6000150X040..................................295 A6011100X030..................................295 A7511050X020..................................297 G1314-65052.................................91, 97
A6000150X046..................................295 A6011100X046..................................295 A7511100X020..................................297 G1314-65054.................................91, 97
A6000150X100..................................295 A6011150X020..................................296 A7511150X030..................................297 G1314-65056........................................97
A6000150X212.........................296, 320 A6011150X030..................................295 A7521030X020..................................297 G1314-65061.................................91, 97
A6000150X300.........................296, 320 A6011MG...........................................297 A7521050X020..................................297 G1314-87301........................................92
A6000250X020..................................296 A6011MG2.........................................297 A7521100X020..................................297 G1314-87302........................................92
A6000250X030..................................295 A6012250X212..................................296 BHT-4 .........................................104, 108 G1315-27705........................................96
A6000250X040..................................295 A6020050X020..................................296 BMT-4 .................................................108 G1315-45003.................................11, 95
A6000250X046..................................295 A6020050X046..................................295 G1103-60001........................................90 G1315-60011..................................94-95
A6000250X100..................................295 A6020100X030..................................295 G1156-68711........................................83 G1315-60012..................................94-95
A6000250X212.........................296, 320 A6020100X046..................................295 G1156-68712........................................83 G1315-60015..................................94-95
A6000250X300.........................296, 320 A6020100X212.........................296, 320 G1156-68713........................................83 G1315-60016.................................94, 96
A6000MG...........................................297 A6020150X020..................................296 G1156-68714........................................83 G1315-60017.................................94, 96
A6000MG2.........................................297 A6020150X030..................................295 G1160-68706........................................83 G1315-60018.................................94, 96
A6001020X020..................................296 A6020150X046..................................295 G1310-68730........................................59 G1315-60022..................................94-95
A6001030X030..................................295 A6020150X300..................................296 G1310-68731........................................59 G1315-60024..................................94-95
A6001030X046..................................295 A6020250X020..................................296 G1310-68741........................................59 G1315-60025..................................94-95
A6001050X020..................................296 A6020250X030..................................295 G1310-68742........................................59 G1315-67301........................................96
A6001050X030..................................295 A6020250X046..................................295 G1311-60003........................................53 G1315-67302........................................96
A6001050X046..................................295 A6020250X100..................................295 G1311-60006........................................12 G1315-68703........................................31
A6001100X010..................................296 A6020250X212.........................296, 320 G1311-60009........................................48 G1315-68708..................................31-32
A6001100X020..................................296 A6020MG...........................................297 G1311-68705........................................60 G1315-68712........................................97
A6001100X030..................................295 A6020MG2.........................................297 G1311-68710........................................59 G1315-68713.................................91, 97
A6001100X046..................................295 A6021030X020..................................296 G1311-68711........................................59 G1315-68715..................................96-97
A6001150X010..................................296 A6021030X046..................................295 G1312-60020........................................49 G1315-68716.................................94, 96
A6001150X020..................................296 A6021050X020..................................296 G1312-60025........................................49 G1315-68724.................................94, 96
A6001150X030..................................295 A6021050X030..................................295 G1312-60061........................................48 G1315-68725..................................96-97
A6001150X046..................................295 A6021050X046..................................295 G1312-60066........................................49 G1315-80001........................................96
A6001250X020..................................296 A6021100X010..................................296 G1312-60067........................................49 G1315-80002........................................96
A6001250X046..................................295 A6021100X020..................................296 G1312-67305........................................23 G1315-80003........................................96
A6001MG...........................................297 A6021100X030..................................295 G1312-67500........................................23 G1315-80004........................................96
A6001MG2.........................................297 A6021100X046..................................295 G1312-68711........................................59 G1315-87101........................................96
A6002050X046S ...............................295 A6021150X020..................................296 G1312-68716........................................53 G1315-87302........................................95
A6002150X300..................................320 A6021150X030..................................295 G1312-68726........................................60 G1315-87303........................................23
A6002250X046..................................295 A6021150X046..................................295 G1312-68730........................................60 G1315-87305........................................96
A6002250X100.........................295, 320 A6021150X100..................................295 G1312-68741........................................59 G1315-87306........................................95
A6002250X212.........................296, 320 A6021250X020..................................296 G1312-68755........................................60 G1315-87311 ...................23, 33, 92, 99
A6002250X300..................................320 A6021250X046..................................295 G1312-87303........................................23 G1315-87312........................................23
A6002250X500.........................296, 320 A6021MG...........................................297 G1312-87304........................................23 G1315-87313........................................96
A6002MG...........................................297 A6021MG2.........................................297 G1312-87305........................................28 G1315-87318........................................96
A6004250X046.........................295, 331 A6022250X500..................................320 G1312-87306........................................28 G1315-87319........................................95
A6004250X100.........................295, 331 A7000100C030..................................293 G1312-87330........................................54 G1315-87321........................................95
PART NUMBER INDEX
G1315-87323........................................96 G1364-68723........................................70 G1600-60211 .....................................178 G1947-20029 .....................................105

G1315-87325........................................95 G1364-81701........................................71 G1600-60230 .....................................190 G1947-60103 .....................................105
G1315-87328........................................96 G1364-83205........................................71 G1600-60232 .....................................180 G1956-20302 .....................................106
G1315-87333........................................96 G1364-84516........................................69 G1600-60233 .....................................180 G1956-80000 .....................................106
G1315-87338........................................96 G1364-84521........................................69 G1600-60310 .....................................190 G1958-60098 .....................................105
G1315-87339........................................95 G1364-84522........................................69 G1600-60311 .....................................178 G1958-60136 .....................................105
G1316-27301........................................28 G1364-84523........................................69 G1600-60330 .....................................190 G1960-80039 .....................................107
G1316-60001........................................82 G1364-84524........................................69 G1600-60332 .....................................180 G1960-80060 .....................................105
G1316-67005........................................75 G1364-84525........................................69 G1600-60400 .....................................194 G1969-20302 .....................................106
G1316-67006........................................75 G1364-84531........................................69 G1600-60411 .....................................178 G1969-60086 .....................................108
G1316-67007........................................75 G1364-84532........................................69 G1600-60419 .....................................184 G1969-85000 .....................................110
G1316-67009........................................75 G1364-86711........................................71 G1600-61132 .....................................180 G1969-85001 .....................................107
G1316-68708........................................83 G1364-87201........................................70 G1600-61211 .....................................178 G1969-85003...............................15, 107
G1316-68710........................................83 G1364-87202........................................70 G1600-61219 .....................................184 G1969-85010 .....................................110
G1316-68711........................................83 G1364-87304..................................70-71 G1600-61232 ............................173, 180 G1969-85020 .....................................110
G1316-68716.................................38, 82 G1364-87305..................................70-71 G1600-61239 .....................................184 G1969-85026 .....................................107
G1316-68721........................................83 G1364-87306..................................70-71 G1600-61311 .....................................178 G1972-60025........................................71
G1316-68744........................................82 G1367-60001........................................69 G1600-61332 .....................................180 G1978-85000...............................15, 107
G1316-80002........................................82 G1367-68730........................................66 G1600-61411 .....................................178 G1982-85001........................................15
G1316-80003........................................82 G1367-68734........................................66 G1600-61419 .....................................184 G1982-85002........................................15
G1316-80004........................................82 G1367-68741........................................66 G1600-62132 .....................................180 G1982-85003........................................15
G1316-83200........................................82 G1367-87012........................................63 G1600-62211 ............................172, 178 G2228-68700........................................59
G1316-87300 ..........................23, 33, 82 G1367-87017........................................63 G1600-62232 .....................................180 G2250-04500........................................65
G1316-87303.................................27, 82 G1367-87101........................................62 G1600-62311 ............................174, 178 G2250-04501........................................65
G1316-87305........................................27 G1367-87102........................................62 G1600-62318 .....................................185 G2250-04502........................................65
G1316-87306........................................28 G1367-87200.................................62, 70 G1600-62332 .....................................180 G2250-04503........................................65
G1316-87309........................................23 G1367-87201........................................62 G1600-62402 .....................................199 G2250-04504........................................65
G1316-87312........................................27 G1367-87202........................................63 G1600-62411 .....................................178 G2255-68700.................................65, 69
G1316-87313........................................27 G1367-87300.................................32, 64 G1600-62700 .....................................190 G2255-68709........................................65
G1316-87314........................................27 G1367-87304........................................28 G1600-63200 .....................................192 G2255-68710........................................65
G1316-87316........................................27 G1375-87301........................................31 G1600-63211 .....................................178 G2255-68720........................................65
G1316-87317........................................27 G1375-87302........................................31 G1600-63311 .....................................178 G2255-68730........................................65
G1316-87318........................................27 G1375-87303.................................32, 64 G1600-63411 .....................................178 G2258-23201........................................54
G1316-87319........................................27 G1375-87304........................................31 G1600-64211 ............................175, 178 G2258-60003........................................64
G1316-87321........................................28 G1375-87305........................................32 G1600-64232 .....................................180 G2258-60011........................................65
G1316-87323........................................28 G1375-87306........................................32 G1600-64311 .....................................178 G2258-68710........................................63
G1321-60005........................................99 G1375-87308........................................32 G1600-64332 .....................................180 G2258-87102........................................63
G1321-60007........................................99 G1375-87309..................................31-32 G1600-64411 .....................................178 G2258-87307........................................34
G1321-60015........................................99 G1375-87310........................................31 G1600-67201 .....................................199 G2258-87310........................................34
G1322-67300........................................58 G1375-87311........................................32 G1600-67219 ............................184, 195 G2258-87311........................................34
G1322-68705.................................58, 60 G1375-87312........................................32 G1600-67220 .....................................195 G2258-87312........................................34
G1328-87600........................................23 G1375-87315.................................32, 64 G1600-67311 .............................194-195 G2258-87313........................................34
G1329-60011........................................65 G1375-87320........................................31 G1600-67312 .....................................195 G2258-87314........................................34
G1329-68718........................................67 G1375-87321........................................31 G1600-67319 ............................184, 195 G2258-87315........................................34
G1329-68727........................................67 G1375-87322........................................31 G1600-68319 ............................184, 192 G2258-87316........................................34
G1329-68736........................................67 G1375-87323........................................31 G1600-68714 .....................................192 G2260-68711.................................32, 64
G1329-68737........................................67 G1375-87324........................................31 G1600-68715 .....................................192 G2260-87101........................................63
G1329-80001........................................62 G1375-87325........................................31 G1600-68716 .....................................192 G2260-87201........................................63
G1329-87012........................................62 G1375-87326........................................34 G1600-68723 .....................................192 G2260-87300........................................26
G1329-87017........................................62 G1375-87327........................................31 G1603A...............................................194 G2260-87301........................................26
G1329-87101........................................62 G1376-60003........................................53 G1607-20030 .....................................195 G2421-60001 .....................................110
G1329-87103........................................62 G1376-60005........................................59 G1607-60000 .....................................195 G2423A...............................................107
G1329-87300........................................23 G1376-68705........................................60 G1607-60001 .....................................195 G2424A...............................................107
G1329-87302.................................32, 64 G1376-68707........................................60 G1607-60041 .....................................195 G2425A...............................................107
G1353-68750........................................75 G1376-68710........................................60 G1607A...............................................195 G2426A...............................................107
G1361-22402........................................50 G1377-44900........................................63 G160U-60419.....................................184 G2427A...............................................105
G1361-23204........................................54 G1377-87000........................................63 G160U-61219.....................................184 G2428A...............................................105
G1361-23205........................................54 G1377-87001........................................63 G160U-61239.....................................184 G2431A...............................................110
G1361-60012........................................49 G1377-87002........................................63 G160U-61419.....................................184 G2432A...............................................110
G1361-60022........................................53 G1377-87201........................................63 G1946-00034 .....................................107 G2441-80010 .....................................106
G1361-67302........................................26 G1377-87300.................................32, 64 G1946-20215 .....................................108 G2453-85050 .....................................107
G1361-68707........................................60 G1377-87310.................................32, 64 G1946-20301 .....................................105 G2453-85060 .....................................107
G1361-68710........................................60 G1379-67310........................................58 G1946-60037 .....................................105 G2455-85001........................................15
G1362-68706........................................98 G1600-23223 .....................................199 G1946-60098 .....................................105 G2571-80103 .....................................106
G1362-68709........................................98 G1600-60002 .....................................190 G1946-60157 .....................................108 G3199B...............................................109
G1362-87300........................................98 G1600-60007 .....................................199 G1946-60180 .....................................108 G4203-68708........................................11
G1362-87301........................................98 G1600-60013 .....................................194 G1946-80009 .....................................105 G4204-40000........................................51
G1364-27107........................................71 G1600-60027 .....................................192 G1946-80019 .....................................106 G4204-40005........................................51
G1364-60021........................................71 G1600-60033 .....................................199 G1946-80049 .....................................108 G4204-60004........................................51
G1364-68706........................................71 G1600-60132 .....................................180 G1946-80054 .....................................108 G4204-60022........................................49
G1364-68711........................................70 G1600-60150 .....................................190 G1946-85004 .....................................107 G4208-68700........................................11
G1364-68712........................................70 G1600-60210 .....................................190 G1946-85021 .....................................107 G4212-60007........................................94
656
PART NUMBER INDEX
G4212-60008........................................94 G5611-67300........................................30 PL1110-6320......................................505 PL1210-6120......................................506

G4212-60011........................................94 G5611-67301........................................30 PL1110-6400......................................508 PL1210-6120EPA ..............................507
G4212-60022........................................51 G5611-68710........................................37 PL1110-6500......................................500 PL1210-6125......................................506
G4212-60032........................................94 G5611-68741...............................59, 101 PL1110-6504......................................500 PL1210-6130......................................506
G4212-60038........................................94 G5615-60005 .....................................102 PL1110-6515......................................505 PL1210-6140......................................506
G4212-68001........................................51 G5615-60017 .....................................102 PL1110-6520......................................505 PL1210-6150......................................506
G4216-68711........................................67 G5615-60018 .....................................102 PL1110-6525......................................505 PL1210-6160......................................506
G4218-20000........................................98 G5615-60022 .....................................102 PL1110-6530......................................505 PL1212-1102......................................470
G4218-20001........................................98 G5616-60050...............................30, 102 PL1110-6540......................................505 PL1212-1103......................................470
G4218-20002........................................98 G5664-86703 .....................................102 PL1110-6550......................................505 PL1212-3100......................................470
G4218-20003........................................98 G5664-86706 .....................................102 PL1111-3500.............................310, 393 PL1212-3101......................................470
G4218-20004........................................98 G5667-40500 .....................................102 PL1113-1300......................................518 PL1212-3702......................................470
G4218-40000........................................98 G5667-60310........................................32 PL1113-1320......................................521 PL1212-3703......................................470
G4218-40010........................................98 G5667-60320...............................64, 102 PL1113-1325......................................520 PL1212-3800......................................470
G4218-40011........................................98 G5667-60500........................................30 PL1113-1500......................................516 PL1212-3801......................................470
G4218-40100........................................98 G5667-60501........................................30 PL1113-3100......................................511 PL1212-6100......................................470
G4218-40110........................................98 G5667-60502........................................30 PL1113-3120......................................511 PL1212-6101......................................470
G4218-40130........................................98 G5667-60503........................................30 PL1113-3300......................................511 PL1212-6200......................................470
G4218-40150........................................98 G5667-60504........................................30 PL1113-3500......................................511 PL1212-6201......................................470
G4218-40220........................................98 G5667-60505........................................30 PL1113-6300......................................518 PL1212-6400......................................470
G4218-60100........................................98 G5667-87017...............................63, 102 PL1113-6325......................................520 PL1212-6401......................................470
G4218-68010........................................98 G5667-87200...............................63, 101 PL1113-6500......................................516 PL1212-6800......................................470
G4218-85000.................................15, 98 G6011A...............................................109 PL1113-6520......................................521 PL1212-6801......................................470
G4220-20012........................................11 G6012A...............................................109 PL1114-1900HFIP.............................509 PL1213-6520......................................521
G4220-24013........................................52 G6013A...............................................109 PL1114-6900HFIP.............................509 PL1220-6130......................................528
G4220-26210........................................52 G6014A...............................................109 PL1117-1800......................................512 PL1245-1102......................................474
G4220-60006........................................51 G7100-60002 .....................................190 PL1117-1830......................................512 PL1245-1103.............................411, 474
G4220-60007........................................53 G7100-60007 .....................................199 PL1117-6800......................................512 PL1245-3102......................................474
G4220-60012........................................51 G7100-60033 .....................................199 PL1117-6830......................................512 PL1245-3103.............................411, 474
G4220-60015........................................51 G7100-60150 .....................................190 PL1120-3830......................................511 PL1245-3702.............................411, 474
G4220-60016........................................51 G7100-60210 .....................................190 PL1120-6520......................................525 PL1245-3703.............................411, 474
G4220-60022........................................49 G7100-60230 .....................................190 PL1120-6830......................................525 PL1249-1120.............................525, 528
G4220-60028........................................49 G7100-60310 .....................................190 PL1145-1802......................................474 PL1249-6100......................................528
G4220-60035........................................51 G7100-60330 .....................................190 PL1145-1803......................................474 PL1249-6140......................................528
G4220-63010........................................52 G7100-60400 ............................190, 194 PL1147-1501......................................428 PL1249-6150......................................528
G4220-63015........................................52 G7100-62700 .....................................190 PL1147-6501......................................428 PL1251-1102.............................409, 474
G4226-60021........................................65 G7100-68705 .....................................200 PL1149-1530......................................525 PL1251-1103.............................409, 474
G4226-60310.................................32, 64 G7100-68723 .....................................192 PL1149-1840......................................525 PL1251-3102.............................409, 474
G4226-67001........................................67 PCG931AAKIT...................................322 PL1149-3800......................................511 PL1251-3103.............................409, 474
G4226-68735........................................66 PCG932AAKIT...................................322 PL1149-6240......................................525 PL1251-3702.............................409, 474
G4226-87012........................................63 PCG933AAKIT...................................322 PL1149-6250......................................525 PL1251-3703.............................409, 474
G4226-87020........................................63 PCG93LL500X25...............................322 PL1149-6260......................................525 PL1310-0001......................................529
G4226-87201........................................63 PCG93LL500X25WJ ........................322 PL1149-6800......................................525 PL1310-0002......................................529
G4240-23705 .....................................100 PCG93LL500X50...............................322 PL1149-6801......................................525 PL1310-0005......................................529
G4240-25206 .....................................100 PCG93LL500X50WJ ........................322 PL1149-6820......................................525 PL1310-0007......................................529
G4240-43200 .....................................100 PCG93LL500X75...............................322 PL1149-6840......................................525 PL1310-0008......................................529
G4240-87300 .....................................100 PCG93LL500X75WJ ........................322 PL1149-6850......................................525 PL1310-0012......................................529
G4240-87301 .....................................100 PCG93LLSTAND123 ........................322 PL1149-6860......................................525 PL1310-0016....................310, 342, 393
G4240-87302 .....................................100 PL1012-5A05.....................................475 PL1151-1802......................................474 PL1310-0036......................................529
G4240-87303 .....................................100 PL1013-2100......................................511 PL1151-1803......................................474 PL1310-0048......................................529
G4240-87304 .....................................100 PL1013-2120......................................511 PL1151-3802......................................474 PL1312-1300.............................393, 463
G4240-87309 .....................................100 PL1013-2300......................................511 PL1151-3803......................................474 PL1312-1301......................................463
G4240-87310 .....................................100 PL1013-2500......................................511 PL1170-1810......................................342 PL1312-1500.............................393, 463
G4280-60031........................................48 PL1020-2830......................................511 PL1170-1820......................................342 PL1312-1501......................................463
G4280-60033........................................48 PL1049-2800......................................511 PL1170-1830......................................342 PL1312-1502.............................393, 463
G4280-60061........................................48 PL1110-1120.............................500, 502 PL1170-1840......................................342 PL1312-1503......................................463
G4280-68710.................................60, 66 PL1110-1220.............................500, 502 PL1170-1850......................................342 PL1312-1802.............................393, 463
G4280-68730.................................60, 66 PL1110-1320......................................500 PL1170-1860......................................342 PL1312-1803......................................463
G4280-68750.................................60, 66 PL1110-1400......................................508 PL1170-2820......................................342 PL1312-3300.............................393, 463
G4280-68770.................................60, 66 PL1110-1520......................................500 PL1170-2823......................................342 PL1345-1502.............................411, 463
G4296-68715........................................11 PL1110-6100......................................500 PL1170-6810......................................342 PL1345-1503.............................411, 463
G5611-21503................51, 64, 101-102 PL1110-6100LS.................................502 PL1170-6820......................................342 PL1351-1502.............................409, 463
G5611-26210...............................52, 101 PL1110-6115......................................505 PL1170-6830......................................342 PL1351-1503.............................409, 463
G5611-60020...............................49, 101 PL1110-6120......................................505 PL1170-6840......................................342 PL1410-0101......................................529
G5611-60025...............................49, 101 PL1110-6125......................................505 PL1170-6860......................................342 PL1410-0200......................................529
G5611-60061...............................48, 101 PL1110-6130......................................505 PL1171-1140......................................342 PL1410-0301......................................529
G5611-60067...............................49, 101 PL1110-6140......................................505 PL1171-6140......................................342 PL1410-0501......................................529
G5611-60500........................................30 PL1110-6150......................................505 PL1210-1120......................................506 PL1412-4100......................................471
G5611-60501........................................30 PL1110-6160......................................505 PL1210-3120EPA ..............................507 PL1412-4101......................................471
G5611-60502........................................30 PL1110-6200......................................500 PL1210-6100......................................506 PL1412-4102......................................471
G5611-60503........................................30 PL1110-6200LS.................................502 PL1210-6104......................................506 PL1412-4103......................................471
G5611-63010 .....................................101 PL1110-6300......................................500 PL1210-6115......................................506 PL1412-4200......................................471
PART NUMBER INDEX
PL1412-4201......................................471 PL1512-3702......................................470 PL1712-3703......................................470 PL2010-0104......................................537

PL1412-4400......................................471 PL1512-3703......................................470 PL1712-3800......................................470 PL2010-0105......................................537
PL1412-4401......................................471 PL1512-3800....................310, 393, 470 PL1712-3801......................................470 PL2010-0200......................................535
PL1412-4702......................................471 PL1512-3801....................310, 393, 470 PL1712-6800......................................470 PL2010-0201......................................535
PL1412-4703......................................471 PL1512-3802.............................310, 393 PL1712-6801......................................470 PL2010-0202......................................535
PL1412-4A05.....................................475 PL1512-3803.............................310, 393 PL1745-3102......................................474 PL2010-0203......................................535
PL1412-4K00 .....................................471 PL1512-5100......................................470 PL1745-3103.............................411, 474 PL2010-0300......................................535
PL1412-4K01 .....................................471 PL1512-5101......................................470 PL1745-3702......................................474 PL2010-0301......................................535
PL1412-4K02 .....................................471 PL1512-5102......................................470 PL1745-3703.............................411, 474 PL2010-0400......................................535
PL1412-6100......................................471 PL1512-5103......................................470 PL1751-3102.............................409, 474 PL2010-0401......................................535
PL1412-6101......................................471 PL1512-5200......................................470 PL1751-3103.............................409, 474 PL2010-0402......................................535
PL1412-6102......................................471 PL1512-5201......................................470 PL1751-3702.............................409, 474 PL2010-0403......................................535
PL1412-6103......................................471 PL1512-5400......................................470 PL1751-3703.............................409, 474 PL2010-0501......................................536
PL1412-6200......................................471 PL1512-5401......................................470 PL1812-3102......................................470 PL2010-0505......................................536
PL1412-6201......................................471 PL1512-5500.............................310, 393 PL1812-3103......................................470 PL2010-0601......................................536
PL1412-6400......................................471 PL1512-5501.............................310, 393 PL1812-6100......................................470 PL2010-0605......................................536
PL1412-6401......................................471 PL1512-5702......................................470 PL1812-6101......................................470 PL2012-0001......................................538
PL1412-6702......................................471 PL1512-5703......................................470 PL1812-6200......................................470 PL2012-0005......................................538
PL1412-6703......................................471 PL1512-5800....................310, 393, 470 PL1812-6201......................................470 PL2012-0010......................................538
PL1412-6800......................................471 PL1512-5801....................310, 393, 470 PL1812-6400......................................470 PL2012-1001......................................538
PL1412-6801......................................471 PL1512-5802.............................310, 393 PL1812-6401......................................470 PL2012-1005......................................538
PL1412-6A05.....................................475 PL1512-5A05.....................................475 PL1812-6800......................................470 PL2012-1010......................................538
PL1412-6K00 .....................................471 PL1514-1900HFIP.............................509 PL1812-6801......................................470 PL2012-2001......................................538
PL1412-6K01 .....................................471 PL1514-5900HFIP.............................509 PL1845-2102......................................474 PL2012-2005......................................538
PL1412-6K02 .....................................471 PL1545-1502......................................411 PL1845-2103.............................411, 474 PL2012-2010......................................538
PL1417-0800......................................512 PL1545-1503......................................411 PL1845-3102.............................411, 474 PL2012-3001......................................538
PL1417-0830......................................512 PL1545-1802......................................411 PL1845-3103.............................411, 474 PL2012-3005......................................538
PL1445-4102.............................411, 474 PL1545-1803......................................411 PL1851-2102.............................409, 474 PL2012-3010......................................538
PL1445-4103......................................474 PL1545-3102.............................411, 474 PL1851-2103.............................409, 474 PL2012-4001......................................538
PL1445-4702.............................411, 474 PL1545-3103.............................411, 474 PL1851-3102.............................409, 474 PL2012-4005......................................538
PL1445-4703.............................411, 474 PL1545-3702.............................411, 474 PL1851-3103.............................409, 474 PL2012-4010......................................538
PL1445-6102.............................411, 474 PL1545-3703.............................411, 474 PL1912-1300.............................310, 393 PL2012-5001......................................538
PL1445-6103.............................411, 474 PL1545-3802......................................411 PL1912-1301.............................310, 393 PL2012-5005......................................538
PL1445-6702.............................411, 474 PL1545-3803......................................411 PL1912-1500.............................310, 393 PL2012-5010......................................538
PL1445-6703.............................411, 474 PL1545-5102.............................411, 474 PL1912-1501.............................310, 393 PL2012-6001......................................538
PL1451-4102.............................409, 474 PL1545-5103.............................411, 474 PL1912-1502.............................310, 393 PL2012-6005......................................538
PL1451-4103.............................409, 474 PL1545-5702......................................474 PL1912-1503.............................310, 393 PL2012-6010......................................538
PL1451-4702.............................409, 474 PL1545-5703.............................411, 474 PL1912-1801.............................310, 393 PL2012-7001......................................538
PL1451-4703.............................409, 474 PL1547-1501......................................428 PL1912-1802.............................310, 393 PL2012-7005......................................538
PL1451-6102.............................409, 474 PL1547-5501......................................428 PL1912-1803.............................310, 393 PL2012-7010......................................538
PL1451-6103.............................409, 474 PL1551-1502......................................409 PL1912-3300.............................310, 393 PL2012-8001......................................538
PL1451-6702.............................409, 474 PL1551-1503......................................409 PL1912-3301.............................310, 393 PL2012-8005......................................538
PL1451-6703.............................409, 474 PL1551-1802......................................409 PL1912-3500.............................310, 393 PL2012-8010......................................538
PL1510-1100......................................504 PL1551-1803......................................409 PL1912-3501.............................310, 393 PL2012-9001......................................538
PL1510-1200......................................504 PL1551-3102.............................409, 474 PL1912-3801.............................310, 393 PL2012-9005......................................538
PL1510-1300......................................504 PL1551-3103.............................409, 474 PL1912-3802.............................310, 393 PL2012-9010......................................538
PL1510-1500......................................504 PL1551-3702.............................409, 474 PL1912-3803.............................310, 393 PL2013-1001......................................538
PL1510-1504......................................504 PL1551-3703.............................409, 474 PL1912-5500.............................310, 393 PL2013-1005......................................538
PL1510-5100......................................504 PL1551-3802......................................409 PL1912-5501.............................310, 393 PL2013-1010......................................538
PL1510-5200......................................504 PL1551-3803......................................409 PL1912-5801.............................310, 393 PL2013-2001......................................538
PL1510-5300......................................504 PL1551-5102.............................409, 474 PL1945-1502......................................411 PL2013-2005......................................538
PL1510-5500......................................504 PL1551-5103.............................409, 474 PL1945-1503......................................411 PL2013-2010......................................538
PL1510-5504......................................504 PL1551-5702.............................409, 474 PL1945-1802......................................411 PL2013-3001......................................538
PL1512-1300.............................310, 393 PL1551-5703.............................409, 474 PL1945-1803......................................411 PL2013-3005......................................538
PL1512-1301.............................310, 393 PL1570-5810......................................342 PL1945-3802......................................411 PL2013-3010......................................538
PL1512-1500.............................310, 393 PL1612-1801.............................310, 393 PL1945-3803......................................411 PL2013-4001......................................538
PL1512-1501.............................310, 393 PL1670-0810......................................342 PL1951-1502......................................409 PL2013-4005......................................538
PL1512-1502.............................310, 393 PL1670-0820......................................342 PL1951-1503......................................409 PL2013-4010......................................538
PL1512-1503.............................310, 393 PL1670-0830......................................342 PL1951-1802......................................409 PL2013-5001......................................538
PL1512-1801.............................310, 393 PL1670-0840......................................342 PL1951-1803......................................409 PL2013-5005......................................538
PL1512-1802.............................310, 393 PL1670-0850......................................342 PL1951-3802......................................409 PL2013-5010......................................538
PL1512-1803.............................310, 393 PL1670-0860......................................342 PL1951-3803......................................409 PL2013-6001......................................538
PL1512-3100......................................470 PL1671-0140......................................342 PL1C12-2502 .....................................393 PL2013-6005......................................538
PL1512-3101......................................470 PL1712-3100......................................470 PL1E10-3120EPA..............................507 PL2013-6010......................................538
PL1512-3102......................................470 PL1712-3101......................................470 PL1E10-6120EPA..............................507 PL2013-7001......................................538
PL1512-3103......................................470 PL1712-3102......................................470 PL1E12-5A05.....................................475 PL2013-7005......................................538
PL1512-3200......................................470 PL1712-3103......................................470 PL1F70-6830......................................342 PL2013-7010......................................538
PL1512-3201......................................470 PL1712-3200......................................470 PL1F70-6850......................................342 PL2013-8001......................................538
PL1512-3300.............................310, 393 PL1712-3201......................................470 PL2010-0100......................................537 PL2013-8005......................................538
PL1512-3301.............................310, 393 PL1712-3400......................................470 PL2010-0101......................................537 PL2013-8010......................................538
PL1512-3401......................................470 PL1712-3401......................................470 PL2010-0102......................................537 PL2013-9001......................................538
PL1512-3501.............................310, 393 PL1712-3702......................................470 PL2010-0103......................................537 PL2013-9005......................................538
658
PART NUMBER INDEX
PL2013-9010......................................538 PL2023-6005......................................540 PL2083-2010......................................542 PL2144-2000......................................545

PL2014-0001......................................538 PL2023-6010......................................540 PL2083-3001......................................542 PL2144-2001......................................545
PL2014-0005......................................538 PL2023-7001......................................540 PL2083-3005......................................542 PL2144-3000......................................545
PL2014-0010......................................538 PL2023-7005......................................540 PL2083-3010......................................542 PL2144-3001......................................545
PL2014-1001......................................538 PL2023-7010......................................540 PL2083-4001......................................542 PL3540-C603VP................................476
PL2014-1005......................................538 PL2023-8001......................................540 PL2083-4005......................................542 PL3540-D603VP................................476
PL2014-1010......................................538 PL2023-8005......................................540 PL2083-4010......................................542 PL3540-P603VP ................................476
PL2014-2001......................................538 PL2023-8010......................................540 PL2083-5001......................................542 PL3549-3603VP ................................476
PL2014-2005......................................538 PL2023-9001......................................540 PL2083-5005......................................542 PL3554-1602dAbz ............................347
PL2014-2010......................................538 PL2023-9005......................................540 PL2083-5010......................................542 PL3554-1602dCac ............................347
PL2014-3001......................................538 PL2023-9010......................................540 PL2083-6001......................................542 PL3554-1602dCbz.............................347
PL2014-3005......................................538 PL2024-0001......................................540 PL2083-6005......................................542 PL3554-1602dGdmf .........................347
PL2014-3010......................................538 PL2024-0005......................................540 PL2083-6010......................................542 PL3554-1602dGibu...........................347
PL2014-4001......................................538 PL2024-0010......................................540 PL2083-7001......................................542 PL3554-1602dT.................................347
PL2014-4005......................................538 PL2024-1001......................................540 PL2083-7005......................................542 PL3554-4602dAbz ............................347
PL2014-4010......................................538 PL2024-1005......................................540 PL2083-7010......................................542 PL3554-4602dCac ............................347
PL2014-6001......................................538 PL2024-1010......................................540 PL2083-8001......................................542 PL3554-4602dCbz.............................347
PL2014-6005......................................538 PL2024-2001......................................540 PL2083-8005......................................542 PL3554-4602dGdmf .........................347
PL2014-6010......................................538 PL2024-2005......................................540 PL2083-8010......................................542 PL3554-4602dGibu...........................347
PL2014-7001......................................538 PL2024-2010......................................540 PL2083-9001......................................542 PL3554-4602dT.................................347
PL2014-7005......................................538 PL2070-0200......................................535 PL2083-9005......................................542 RMSN-2..............................................108
PL2014-7010......................................538 PL2070-0201......................................535 PL2083-9010......................................542 RMSN-4..............................................108
PL2014-8001......................................538 PL2070-0202......................................535 PL2084-0001......................................542
PL2014-8005......................................538 PL2070-0203......................................535 PL2084-0005......................................542
PL2014-8010......................................538 PL2070-1001......................................542 PL2084-0010......................................542
PL2014-9001......................................538 PL2070-1005......................................542 PL2084-1001......................................542
PL2014-9005......................................538 PL2070-1010......................................542 PL2084-1005......................................542
PL2014-9010......................................538 PL2070-2001......................................542 PL2084-1010......................................542
PL2020-0200......................................535 PL2070-2005......................................542 PL2084-2001......................................542
PL2020-0201......................................535 PL2070-2010......................................542 PL2084-2005......................................542
PL2020-0202......................................535 PL2070-3001......................................542 PL2084-2010......................................542
PL2020-0203......................................535 PL2070-3005......................................542 PL2090-1000......................................544
PL2022-2001......................................540 PL2070-3010......................................542 PL2090-3000......................................544
PL2022-2005......................................540 PL2070-4001......................................542 PL2090-4000......................................544
PL2022-2010......................................540 PL2070-4005......................................542 PL2090-5000......................................544
PL2022-3001......................................540 PL2070-4010......................................542 PL2090-6000......................................544
PL2022-3005......................................540 PL2070-5001......................................542 PL2090-8000......................................544
PL2022-3010......................................540 PL2070-5005......................................542 PL2091-1000......................................544
PL2022-5001......................................540 PL2070-5010......................................542 PL2091-2000......................................544
PL2022-5005......................................540 PL2070-6001......................................542 PL2091-3000......................................544
PL2022-5010......................................540 PL2070-6005......................................542 PL2091-4000......................................544
PL2022-6001......................................540 PL2070-6010......................................542 PL2142-3000......................................545
PL2022-6005......................................540 PL2070-7001......................................542 PL2142-3001......................................545
PL2022-6010......................................540 PL2070-7005......................................542 PL2142-5000......................................545
PL2022-7001......................................540 PL2070-7010......................................542 PL2142-6000......................................545
PL2022-7005......................................540 PL2070-8001......................................542 PL2142-6001......................................545
PL2022-7010......................................540 PL2070-8005......................................542 PL2142-7000......................................545
PL2022-8001......................................540 PL2070-8010......................................542 PL2142-7001......................................545
PL2022-8005......................................540 PL2070-9001......................................542 PL2142-8000......................................545
PL2022-8010......................................540 PL2070-9005......................................542 PL2142-8001......................................545
PL2022-9001......................................540 PL2070-9010......................................542 PL2143-0000......................................545
PL2022-9005......................................540 PL2071-0001......................................542 PL2143-0101......................................545
PL2022-9010......................................540 PL2071-0005......................................542 PL2143-2000......................................545
PL2023-0001......................................540 PL2071-0010......................................542 PL2143-2001......................................545
PL2023-0005......................................540 PL2071-1001......................................542 PL2143-3000......................................545
PL2023-0010......................................540 PL2071-1005......................................542 PL2143-3001......................................545
PL2023-1001......................................540 PL2071-1010......................................542 PL2143-4000......................................545
PL2023-1005......................................540 PL2071-2001......................................542 PL2143-4001......................................545
PL2023-1010......................................540 PL2071-2005......................................542 PL2143-5000......................................545
PL2023-2001......................................540 PL2071-2010......................................542 PL2143-5001......................................545
PL2023-2005......................................540 PL2071-3001......................................542 PL2143-6000......................................545
PL2023-2010......................................540 PL2071-3005......................................542 PL2143-6001......................................545
PL2023-3001......................................540 PL2071-3010......................................542 PL2143-7000......................................545
PL2023-3005......................................540 PL2080-0200......................................535 PL2143-7001......................................545
PL2023-3010......................................540 PL2080-0201......................................535 PL2143-8000......................................545
PL2023-4001......................................540 PL2080-0202......................................535 PL2143-8001......................................545
PL2023-4005......................................540 PL2080-0203......................................535 PL2143-9000......................................545
PL2023-4010......................................540 PL2083-1001......................................542 PL2143-9001......................................545
PL2023-5001......................................540 PL2083-1005......................................542 PL2144-0000......................................545
PL2023-5005......................................540 PL2083-1010......................................542 PL2144-0101......................................545
PL2023-5010......................................540 PL2083-2001......................................542 PL2144-1000......................................545
PL2023-6001......................................540 PL2083-2005......................................542 PL2144-1001......................................545
APPLICATION TITLE INDEX
Application Title Index

12 phenols analyzed Antibiotics: Lincomycin and Clindamycin Comparison of Agilent Bio SEC-3
using a longer (4.6 x 100 mm) by LC-APCI-MS LC-TIC ............................................620 and competitor column in the analysis
Agilent Poroshell 120 EC-C18 column.................231 Aromatic acids/benzoic acids: of a monoclonal antibody.......................................420
Selectivity differences .............................................623 Comparison of PolyPore
A Aromatics II................................................................599 with conventional individual
Adrenocorticosteroids Aspartame: Metabolites and applications..........599 pore size GPC columns ...........................................517
on Pursuit PFP and C18 ..........................................290 Aspirin and cough remedy .....................................628 Comparison of phenols separation
Agilent Bio SEC-3 with Poroshell 120....................................................584
column length comparison, 150 mm...................422 B Components of green tea separated
Agilent Bio SEC-3 BSA tryptic digest on RRHT...................................577 on Rapid Resolution StableBond SB-C8.............625
column length comparison, 300 mm...................422 Consistent ion-exchange
Barbiturates................................................................643
Alberta Peptide Institute test mix................308, 390 MAb separation ...............................................400, 562
Baseline expansion of a separation
Alcohols and aliphatic compounds......................582 Corn syrup, Hi-Plex...................................................339
of protein standards.................................................414
Alkyd resin..................................................................519 Cough formula mixture:
Basic antihistamines
Amino acid standard separation on Extend-C18 at high pH.......................................275 Fast and efficient separation .................................628
on Eclipse Plus C18..................................................564 Cough/cold remedies on ZORBAX 300SCX ......334
Benzoic acid/sorbic acid........................................609
Amitrol in water by LC/MS, 0.05 ppb .................585 Crude bradykinin prep load ....................................469
Bio-Monolith DEAE column monitors
An overlay of the original ZORBAX
phage production during fermentation................415 Crude peptide screen...............................................476
Eclipse Plus 5 µm method and Agilent
Poroshell 120 method. All 11 peaks on Blueberry anthocyanin analysis ...........................594
Poroshell 120 are resolved by the time Brij 35 ..........................................................................581 D
the first peak elutes on the original 5 µm DNPH: Derivatized Aldehydes
ZORBAX Eclipse Plus method ..............................595 C obtained from air.......................................................584
Analgesics......................................................................618 Calibration curves.....................................................505 Deoxynucleosides: Using rapid resolution
Analgesics: Non-steroidal anti-inflammatory Calibration of the ProSEC 300S 3.5 µm columns.........................................................577
drugs: Narrow bore separation ................................622 column with globular proteins ..............................429 Determination of anthocyanins in blueberries .....597
Analysis of Biocides in Hand Sanitizer ...............580 Capillary columns for HPLC Dexamethasone, USP method: Rapid analysis.....639
Analysis of Bovine Serum Albumin by light analyses with UV and MS detection ...................455 Differences in composition of
scattering using ProSEC 300S columns..............429 Carbohydrates in colas............................................601 two alkyl naphthalene sulfonates ........................527
Analysis of carbohydates Carbohydrates in juices...........................................601 Dimethyl-C18/amide, Bonus-RP...........................280
on Hi-Plex H columns .............................................340 Carbohydrates in milk..............................................602
Analysis of choline kinase on PL-SAX 4000Å.....407 Carbohydrates: Carbohydrate standards.............600
E
Analysis of ciprofloxacin EasiVial PS-H .............................................................533
Carbohydrates:
and ciprofloxacin metabolites................................643 Effect of mobile phase strength............................600 Eclipse Plus C18 vs. C8 ...........................................250
Analysis of diazepam on Rx-C18...........................272 Carbohydrates: Sugar alcohols..............................601 Eclipse Plus C8 is less retentive
Analysis of fruit juice...............................................338 than Eclipse Plus C18..............................................251
Catecholamines.........................................................578
Analysis of low molecular weight polystyrene Eliminate tailing and maximize resolution
Catecholamines/biogenic amines: with Eclipse Plus Columns.....................................250
and oligomer fractions collected from
Rapid separation using ion-pair reagents...........623
OligoPore preparative columns ................................522 Environmental phenols on Poroshell 120...........230
Charge isoform analysis
Analysis of oxidized insulin chains.........................553 Epoxy resin ................................................................501
of monoclonal antibodies.......................................401
Analysis of pesticide residues in green tea.........594 Excellent separation of two phenol
Chiral ethiazide (diuretic drug) separation .........624
Analysis of representative whey proteins............408 formaldehyde resins with PolarGel-M.................513
Chiral separation of S- and R-Norfluoxetine......626
Analysis of sugars with high sodium matrix .......341 Exceptional Lot-to-lot Reproducibility..................426
Chiral separation of atenolol..................................627
Analysis of sweeteners on Hi-Plex Ca columns.....340 Exceptional separating power ...............................403
Chiral separation of Exploiting chemical stability –
Analysis of water soluble vitamins
in multivitamin tablets......................................................612 fluoxetine enantioners (Prozac) ............................624 NH4OH concentration....................................308, 390
Analytical separation of Chiral separation of hexobarbitol..........................625 Explosives and related compounds:
low molecular weight polystyrene .......................522 Chiral separation of salbutamol ............................626 Qualitative and quantitative analysis...................586
Anesthetics, local: Bonded phase selectivity....619 Chiral separation of tolperison enantiomers .....627 Explosives from soil extract ...................................587
Anilines, substituted: Rapid separation ..............585 Cocaine and metabolites ........................................627 Extend-C18 provides good peak shape
Anthocyanins from blueberries: Column reproducibility – 200 injections of at low pH ....................................................................276
High-efficiency high-speed separation................598 reduced monoclonal antibody using an
Antibiotics: High speed separation ......................620 Agilent ZORBAX RRHD 300SB-C3 column........555 F
Antibodies: Fast separation of IgM Column stability testing at pH 3 and 60 °C........257 Fast analysis 11 common compounds
and IgG antibodies ...................................................565 Column stability testing at pH 7.0 ........................258 found in analgesics .................................................615
Antidepressants, tricyclic: Columns for sample clean-up................................507 Fast analysis of cefepime
Comparative separation ..........................................636 Comparing HILIC and RPLC of morphine and related impurities ....................................217, 611
Antifungal medications ...........................................621 using Agilent ZORBAX RRHD columns Fast analysis of Pindolol .........................................642
Antifungals ........................................................290, 621 with UHPLC/MS ......................................................631 Fast analysis of sulfa drugs...................................596
Antihistamines: Fast separations Comparison of Aβ peptide RP-HPLC Fast and ultra-fast analysis
on RRHT Extend-C18 ...............................................617 separations at low and high pH............................573 of basic compounds........................................251, 617
660
Fast LC/MS/MS analysis of group 4 High sensitivity with capillary columns ..............453 O
pharmaceuticals from EPA 1694 ..........................583 Higher resolution of intact monoclonal antibody...368 Oligosaccharides.......................................................610
Fast method for ginseng analyses Higher resolution of oxidation study..........354, 368 Opiates (drugs of abuse) by LC/MS....................630
scaled from a traditional method.........................612 Hormones/steroids..................................................633 Optimize separations with
Fast separation of recombinant Human serum: Low abundance Eclipse XDB selectivity options.............................259
human erythropoietin..............................................553 protein isolation and identification Optimizing protein separations with
Fast separation of reduced from 1-D gel band by LC/MS .......................454, 566 Agilent weak cation-exchange columns............558
monoclonal antibody...............................................375 Hyaluronic acid..........................................................527 Organic acid analysis...............................................338
Fast vitamin E analysis Hydrophilic purine/pyrimidine separation..........579
on Rapid Resolution HT ..........................................608 Organic acids separated on ZORBAX SB-Aq.......581
Fast, high-resolution separation of Overlay of UV and Light Scattering 90° for a
peptides and proteins with
I Sample of y-globulins, Illustrating Monomer,
Poroshell 300SB-C18 ...............................................572 Ibuprofen: Optimizing selectivity Dimer, Trimer, and Aggregate Peaks....................430
with RRHT Columns.................................................618 Overlay of UV and light scattering 90° for a
Faster analysis of USP Method
for simvastatin tablet...............................................615 Improved peak shape of basic sample of γ-globulins, illustrating monomer,
compounds using Bonus-RP .................................279 dimer, and trimer peaks ..........................................430
Faster separation of sulfa drugs ...........................616
Faster separations using Agilent Improved reproducibility
weak cation-exchange columns...........................560 of monoclonal antibodies.......................................369 P
Fat-soluble vitamins on Improved resolution with smaller particle size pH gradient elution for improved separation
ZORBAX Eclipse XDB-C8........................................605 with Agilent weak cation-exchange columns.....559 of monoclonal antibody charged variants..........561
Five different bonded phases Increase peak capacity with RRHT columns.....240 PLgel LS column .......................................................503
provide selectivity options......................................266 Increased resolution for peptide mapping....357, 369 PLgel Olexis reveals true modalities
Flavoring agents........................................................602 Intact MAb monomer across the range of polyolefins.............................508
Food colors, FD&C....................................................602 and dimer separation.............................355, 419, 563 Parabens: High speed separation.........................604
Four different 300SB Peak shape and efficiency are better
bonded phases optimize separation L with ZORBAX Eclipse Plus.....................................249
of large polypeptides................................................371 LC/MS analysis of angiotensin Peptide RP-HPLC/ESI-MS using NH4OH
Fraction analysis – on Extend-C18 ...........................................................377 mobile phase yields both positive and
the concentration overload purification .............469 LC/MS performance test mix negative ion spectra................................................573
for Polaris C8-A .........................................................299 Peptides/proteins:
G Lamotrigine ................................................................642 Effect of elevated temperature.....................370, 571
Glycosylated proteins: Large Molecules Large fibrous proteins.....................................309, 392 Peptides/proteins:
on Poroshell 300SB-C18 and 300SB- ..................565 Liquid chromatography phase Equivalent gradient separations............................571
Goldenseal and related alkaloids on test mixture (LPTM) on Pursuit C8 ......................290 Peptides: Effect of TFA concentration........370, 569
Rapid Resolution Eclipse XDB-C18 ......................625 Local anesthetics......................................................619 Peptides: Separation of antiotensins
Good peak shape over a wide pH range Long life at high pH with 300Extend-C18...........378 I, II, III with TFA and NH4OH ................................570
with ZORBAX Eclipse XDB ....................................257
Long life at high pH with Extend-C18..................275 Peptides: Separation of antiotensins
Gradient optimizations for ultra-fast
analysis of reduced monoclonal antibody .........556 Long lifetime of RRHT columns I, II, III with TFA and NH4OH ................................632
at elevated temperatures........................................241 Phenols, substituted ................................................592
Guaifenesin: USP analysis of guaifenesin..........629
Phenoxyacid herbicides ..........................................591
H M Plant hormones: Rapid gradient
HPLC of 25 bp DNA ladder ..........................307, 388 Mechanical stability of Pursuit XRs.....................289 elution separation.....................................................593
HPLC separation of 12 phenols perfomed Metronidazole: Updating USP methods..............629 Plasticized PVC.........................................................501
in just 5 minutes – and under 400 bar – using Microbore HPLC for sensitive peptide analysis ...462 Polyamides .................................................................509
an Agilent Poroshell 120 EC-C18 column .............231 MicroBore Poroshell 300 columns Polycyclic aromatic hydrocarbons
HSA tryptic digest on provide maximum sensitivity for LC/MS............382 according to EPA Method 610...............................589
ZORBAX Rapid Resolution HT 1.8 µm.................566 Mixture of beta blockers ........................................613 Polyester .....................................................................519
Heparin........................................................................526 Monoclonal IgG1 chains: Polyesterimide...........................................................520
Herbicide/pesticide standards: Separation on Poroshell 300SB-C8 .............383, 567
Polyethylene Glycol/Oxide standards .................542
Effect of bonded phase ...........................................588 Morphine and metabolites:
Herbicides on different bonded phases ..............587 Polyethylene glycols .......................................307, 388
Extracted blood plasma sample separation.......630
Herbicides: Rapid separation .................................591 Polymethylmethacrylate in DMF...........................517
High Resolution of 24 Amino Acids N Polymethylmethacrylate standards......................540
Using ZORBAX Eclipse AAA Protocol.................396 Naproxen analysis ...................................................611 Polyol...........................................................................501
High purity and high recovery Natural products – capsaicin and Polyphenylene Sulfides...........................................500
with ZORBAX PrepHT columns ............................315 dihydrocapsaicin on Pursuit XRs C18 .................319 Polystyrene standards .............................................538
High resolution and fast analysis Neutraceuticals: Extract from green tea.............603 Polyurethanes............................................................520
on RRHT Eclipse PAH column...............................254 Neutraceuticals: Polyvinyl alcohol ..............................................526, 528
High resolution normal-phase separation Hypericin separation in St. John's Wort.............632 Pore size choice: Mouse IgG ................................421
of octylphenoxy ethanol surfactant
on ZORBAX CN.........................................................327 New levels of sensitivity and resolution.............235 Pore size choice: Proteins......................................421
High resolution separation of a Nucleosides, purines and pyrimidines ................564 Poroshell 120 EC-C18 for fast
Poly-T-Oligonucleotide size standard Nucleosides: Separation of deoxy UHPLC separations ..................................................232
spiked with 10-mer, 15-mer, 30-mer and ribonucleosides.................................................568 Poroshell 300 columns separate
and 50-mer (main peaks)........................................408 Nucleotides: Separation of mononucleotides ...568 proteins and peptides in seconds ........................381
Preparative fractionation of a culture Separation of group 4 analytes in Tricyclic antidepressants.........................................636

filtrate containing amyloglucosidases EPA 1694 on ZORBAX HILIC Plus column .........325 Tricyclic antidepressants
on Agilent PL-SAX 4000Å......................................473 Separation of heated, stressed MAb...................563 and benzodiazepines................................................289
Preparative scale purification of Separation of highly basic antidepressants Tricyclic antidepressants
Leuprolide by concentration overload.................359 above their pKa in free base form and metabolites: Effect of pore size ....................637
Preparative separation of low (pKa 9.5-9.7) ...............................................................635
molecular weight polystyrene ...............................522 Triton X-114: Decreasing run-time
Separation of licorice root on RRHD columns ..234
by changing bonded phase ....................................580
Protein digest analysis............................................552 Separation of pharmaceutical cardiac drugs.....616
Protein elution pattern on Separation of polypeptides in under 1 minute ..572 Two samples of melamine resin
ZORBAX Poroshell 300SB-C8 ...............................384 analyzed by PolarGel-L ............................................513
Separation of protein standards
Proteins in a complex sample by on Agilent 3 μm ion-exchange columns
2-D HPLC with Nano HPLC columns...................457 by cation-exchange chromatography..................403 U
Proteins: Effect of bonded phase .........................575 Separation of recombinant human UHPLC efficiency at HPLC pressures ..................230
Proteins: Effect of bonded phase, RP..................575 erythropoietin (rEPO)...............................................562 Ultra-high speed and high resolution
Pullulan polysaccharide standards.......................544 Separation of small molecule anorectics ...........622 of intact monoclonal antibodies...........................557
Purification of a 25-mer trityl-off Separation of vitamin D2/D3.................................605 USP analysis of tetracyclines ................................639
oligonucleotide and analytical quantitation of Separation optimization for ultra-fast analysis USP method: Glyburide and internal
the fraction using PLRP-S 100Å, 4.6 x 50 mm ....469 of reduced and alkylated monoclonal antibody.....554 standard, progesterone ...........................................638
Purification of a large oligonucleotide.................473 Several ZORBAX RRHD 1.8 µm selectivities USP method for sorbitol.........................................341
facilitate method development .............................614
USP methods for sugar alcohols ..........................339
Q Short-chain ZORBAX 300SB-C3
Quantification and qualification of is stable at low pH, high temperature.................371 Ulcer treatment drugs at intermediate pH .........637
vitamin C and citric acid in fresh Shorter chain ZORBAX SB-CN Urine, LSD analysis by LC/MS..............................638
grapefruit juice ..........................................................609 is also stable at low pH (pH 2.0, 50 °C)..............265 Use ZORBAX Extend-C18 for
Space ...........................................................................265 alternate selectivity at high pH ....................378, 567
R Sports drink................................................................610
Rapid analysis of an analgesic tablet, StableBond SB-C18 shows excellent V
selectivity differences at pH 2.7 and pH 7 .........250 stability at low pH and high temperature...........265 VX nerve agent metabolites by
Rapid method development for 18 compounds Standard ion-exchange LC/MS-IS standard (C13 labeled) ........................593
with an Agilent RRHD Eclipse PAH column......590 protein separation............................................407, 576 Virtually eliminate retention time variations .......400
Rapid Resolution HT (RRHT) provides double Standard protein separation ..................................410
the efficiency of Rapid Resolution columns ......240 Standard proteins by reversed-phase..................576 W
Reduce analysis time dramatically Starches......................................................................500 Warfarin: USP chromatographic
with Rapid Resolution HT columns......................241 Steroids .......................................................................634 purity method using Eclipse XDB-CN..................640
Reduce peptide map analysis time Steroids: Easy scalability
by 90% with Poroshell 300SB ...............................382 Water-soluble B vitamins
using Agilent Prep columns...................................312 separated on ZORBAX SB-Aq ...............................607
Resin analysis by rapid GPC ..................................511 Steroids: Separation.................................................633
Rose wine...................................................................610 Water-soluble vitamins ...........................................605
Sub 1 minute separations
with RRHD columns.................................................235 Water-soluble vitamins using
S Sugars..........................................................................604
the USP 23 method ..................................................606
SB-CN optimizes retention and resolution.........266 Sugars in plain and milk chocolate......................604 Water-soluble vitamins:
Scale-up from analytical to prep ..........................321 High speed separation using ion-pairing............606
Sulfa drugs .................................................................641
Selectivity changes for basic compounds Weak cation-exchange chromatography
Sulfonamides – Fast analysis
with Eclipse XDB and StableBond.......................258 for P128 therapeutic protein sample on the
with RRHT columns .................................................640
Selectivity comparison of TFA and NH4OH Agilent 1260 Bio-inert Quaternary LC system
Sunscreen ingredients: Perform
for peptide RP-HPLC\ESI-MS analysis...............574 using different cation-exchange columns..........404
conventional, fast and ultra-fast
Selectivity comparison of TFA and separations on the same column family ............607 Whey proteins in dairy samples – milk......391, 578
NHSelectivity comparison: C18 columns............236
Superior loadability on Agilent Prep C18
Selectivity comparison: Phenyl columns ............237 with basic compounds ............................................312 X
Selectivity for urea pesticides ...............................259 Xanthines: Higher resolution,
Selectivity in peptide RP-LC...................................389 T same selectivity with RRHT...................................617
Selectivity test mix for Polaris columns..............299 Temperature as a tool to enhance mass
Separation of 20 PAHs on Eclipse PAH ..............591 transfer and improve resolution of Z
Separation of 8 steroids .........................................613 oligonucleotides in ion-pair ZORBAX Bio-SCX Series II provides
Separation of azo dye degradation products ....583 reversed-phase HPLC .....................................391, 579 more retention of small peptides..........................459
Separation of Azo Dyes...........................................598 Ten cardiac drugs on ZORBAX Bonus-RP is stable
Separation of EPA 610 PAH Mix...........................589 Rapid Resolution HT SB-C18 .................................640 at low and mid pH....................................................279
Separation of a tryptic digest Theobromine in beverages.....................................608 ZORBAX Bonus-RP
on ZORBAX MicroBore 300SB-C18 .....................461 Tocopherols by LC/MS with APPI .......................603 provides unique selectivity.....................................280
Separation of basic peptides on Triamcinolone – USP ZORBAX Eclipse Plus: Best peak shape
Bonus-RP versus traditional Alkyl phase ...........569 analysis of triamcinolone........................................635 in the industry without tailing ...............................249
Separation of charge variants of Triazine pesticides on Bonus-RP ZORBAX Nano columns for high sensitivity
human IgG1 with pH gradient ...............................355 and Alkyl C8 phase...................................................592 protein digest analysis by LC/MS........................453
662
COMPOUND INDEX
Compound Index
A Anthracene ...............................................189, 589-591 2-Butanone (MEK) – DNPH...................................584
a-1-Antichymotrypsin.....................................454, 566 Butylbenzene.............................................................299
Acebutolol..................................................................613
Antithrombin-III................................................454, 566 Butylparaben ...........................................189, 241, 604
Acenaphthene...................................................589-591
Apomyoglobin ...........................................................572 n-Butyraldehyde – DNPH.......................................584
Acenaphthylene................................................589-591
Aprotinin.....................................................................403
Acephate ....................................................................594
Arabinose ...................................................................341
Acetaldehyde – DNPH ............................................584
Arabitol........................................................................339 C
Acetamide ..................................................................615 Caffeine.........................232, 235, 250, 258, 276, 299,
2-Arachinoylglycerol ................................................381
2-Acetamidophenol.........................................235, 615 316, 334, 599, 608, 615
Arginine .............................................................396, 564
Acetaminophen.....................235, 250, 615, 618, 628 Calcium .......................................................................173
Arsenate .....................................................................175
Acetanilide ........................................................235, 618 Calmodulin .................................................................571
Arsenite ......................................................................175
Acetate................................................................174-175 Canadine.....................................................................625
Ascorbic acid.............................................................612
Acetic Acid.................................................................581 Carbamazepine.................................................618, 632
Asparagine........................................................396, 596
Acetone ......................................................................582 Aspartame.......................................232, 290, 299, 599 Carbaryl.......................................................................594
Acetone – DNPH......................................................584 Aspartic acid.....................................................396, 596 Carbendazim ............................................235, 580, 594
Acetophenone...........................................................599 Aspartic acid-phenylalanine dipeptide................599 Carbonate...................................................................175
6-Acetylmorphine .....................................................628 Atenolol ......................................................................613 Carbonic Anhydrase ......................370-371, 381-382,
Acetylsalicylic acid........................235, 250, 618, 628 Atrazine......................................................587-588, 591 408, 571-572
Acrolein – DNPH......................................................584 Azide..........................................................172, 175, 421 Carvone.......................................................................602
Adenine..............................................................564, 579 Catalase ......................................................................432
Adenosine .........................................................564, 568 Catechol...................................230-231, 584, 603, 625
Adonitol ......................................................................339 B Cefazolin .....................................................................620
Adrenaline..................................................................578 Barberine....................................................................625 Cefepime.....................................................................217
Alanine...............................................................396, 564 Barbital........................................................................258 Cefotaxime .................................................................620
Alanine-3-Glycine-4.........................................308, 390 Barbitone....................................................................643 Ceftazidime ................................................................620
Albuterol ............................................................325, 583 Beclomethasone.......................................................290 Celecoxib ....................................................................235
Alprenolol ...................................................................613 Bendroflumethiazide................................................189 Cephaclor ...................................................................280
2-Amino-5-azotoluene .............................................183 Bentazon ....................................................................587 Cephalexin..................................................................280
4-Aminobenzoic acid ......................................290, 621 Benzaldehyde – DNPH ...........................................584 Cephoxitin ..................................................................280
p-Aminobenzoic acid ...............................................609 Benz(e)pyrene ..........................................................591 Cephuroxime..............................................................280
3-Amino-benzonitrile ...............................................585 Benzidine..................................................183, 583, 598 Chlorate.......................................................................172
7-Aminoclonazepam ................................................289 1,2-Benzisothiazol-3(2H)-one ................................580 Chloride......................................................172, 174-175
2-Amino-4,6-dinitrotoluene ............................586-587 Benzisothiiazol-3(2H)-one ......................................235 Chloroaniline.....................................................583, 598
4-Amino-2,6-dinitrotoluene ....................................587 Benzo(a)anthracene .......................................589-591 m-Chloroaniline.........................................................585
4-Amino-4,6-dinitrotoluene ....................................586 Benzo(a)pyrene.................................................589-591 o-Chloroaniline..........................................................585
7-Aminoflunitrazepam .............................................289 Benzo(b)fluoranthene......................................589-591 p-Chloroaniline..........................................................585
2-Aminonaphthalene ...............................................183 Benzocaine ................................................................619 2-Chlorobenzoic ........................................................623
2-Amino-4-nitrotoluene...................................586-587 Benzo(g,h,i)perylene........................................589-591 Chlorocaine................................................................619
2-Amino-6-nitrotoluene...................................586-587 Benzoic acid....................................232, 290, 389, 580, 4-Chloro-3-methylphenol ........................................592
4-Amino-2-nitrotoluene...........................................586 602, 609, 621, 629 5-Chloro-2-methyl-4-isothiazolin-3-one...............235
Amitriptyline ....................................258, 289, 635-637 Benzo(k)fluoeanthene.....................................589-591 2-Chlorophenol..........................................................592
cis-10-OH -Amitriptyline..........................................637 Benzophenone ..........................................................618 o-Chlorophenoxyacetic acid..........................591, 593
trans-10-OH-Amitriptyline.......................................637 Benzoylecgonine ......................................................627 p-Chlorophenoxyacetic acid..........................591, 593
Ammonium ................................................................173 Benzthiazuron ...........................................................588 o-Chlorophenoxy proprionic acid..........................593
Amylbenzene.............................................................299 n-6-Benzyl adenine ..................................................593 Chlorothiazide............................................................189
Amylobarbitone.........................................................643 5-Benzyl-3,6-dioxo-2-piperazineacetic acid........599 Chlorpheniramine ..........................275, 279, 617, 628
Anadamine.................................................................236 Berberine...........................................................251, 617 Chlorthalidone...........................................................189
Androstadiene 3,17 dione ......................................613 Biosynthetic human insulin...................................384 Chrysene.............................................................589-591
Anethole .....................................................................602 Biotin (B7)..................................................................612 Chymotrypsinogen A ...............................................410
Angiotensin I .................308, 377, 389-390, 462, 570 Biphenyl......................................................................189 Cimetidine ................................................325, 583, 637
Angiotensin II ..........................194, 308, 370, 377, 381, Bovine carbonic anhydrase ..........................407, 576 d-Cinchonine.....................................................266, 619
389-390, 462, 570-572 Bromide ......................................................................172 Cinnamaldehyde .......................................................599
Angiotensin III........................308, 377, 389-390, 570 BSA...................................382, 425-426, 432, 576-577 Ciprofloxacin..............................................................620
Aniline .......................................................183, 583, 598 Bumetanide ...............................................................189 Citrate..........................................................................174
p-Cl-Aniline.................................................................183 Buspirone ...................................................................616 Citric Acid................................338, 396, 581, 609-610
Anisidine.....................................................................598 Butacaine ..........................................................266, 619 Clindamycin ...............................................................620
p-Anisidine .................................................................585 tert-butanol ................................................................582 Clomipramine ............................................................289
COMPOUND INDEX
Clonazepam ...............................................................289 1,7-Dimethylxanthine...............................................617 3-Fluorobenzoic.........................................................623

Clotrimazole ...............................................................621 3,7-Dimethylxanthine (theobromine)...................617 Fluorocytosine...........................................................579
Cobalamin (B12) .......................................................612 1,3-Dinitrobenzene ...........................................586-587 Folic acid....................................................605-606, 612
Cocaine ..............................................................619, 627 2,4-Dinitrophenol ......................................................592 Formaldehyde – DNPH ...........................................584
Codeine.......................................................................630 2,4-Dinitrotoluene.............................................586-587 Formate.......................................................................174
Corticosterone...........................................................290 2,6-Dinitrotoluene.............................................586-587 Fructose ..................................338, 340, 600, 604, 610
Cortisone ...........................................................290, 299 Dioctyl phthalate..............................................290, 299 Fumaric Acid..............................................................581
Cortisone acetate .....................................................290 Diphenhydramine ...................................275, 617, 632 Furosemide ................................................................616
m-Cresol......................................................................590 Diphenylamine ..........................................................586
o-Cresol.............................................230-231, 584, 592 Dipropyl phthalate....................................................241
p-Cresol......................................................230-231, 584 Dipropylthalate..........................................................250 G
Crotonaldehyde – DNPH ........................................584 Dipyridamole..............................................................616 Galactose....................................................................340
Cyanide .......................................................................175 Disopyramide.............................................................640 Genistein ....................................................................266
Cyanidin .............................................................237, 597 Diuron................................................259, 587-588, 591 g-Globulin ...................................................................421
Cyanocobalamin (B12)............................................605 Dopamine ..........................................................578, 623 Glucagon.....................................................................384
p-Cymene ...................................................................599 Doxepin.............................................258, 289, 635-636 Glucose ...........................338, 340-341, 600, 604, 610
Cyprodinil....................................................................594 Doxycycline................................................................639 Glutamine ..........................................................396, 564
Cysteine ......................................................................396 Doxylamine ..............................................275, 279, 617 Glutamate...................................................................175
Cytidine .......................................................................568 Dulcitol........................................................................339 Gly3-Gly4 (Na-acetylated).............................308, 390
Cytochrome C ................183, 382, 370-371, 400, 403, Glyburide.....................................................................638
410, 558-560, 571, 572, 576 Glycerol .......................................................................610
Cytodine......................................................................564 E Glyceryl Guaicolate ..................................................334
Cytosine .............................................................564, 579 Epinephrine................................................................623 Gluconate ..........................................................396, 564
Ecgonine methylester..............................................627 Glycine.......................................................389, 396, 564
Econazole ...................................................................621 Guaifenesin................................................................629
D Eletriptan ....................................................................616 Guanine..............................................................564, 579
Daidzen .......................................................................266 Epagallocatechin ......................................................603 Guanosine .........................................................564, 568
Dehydroacetic acid ..................................................232 Epicatechin........................................................603, 625
Delphinidin ........................................................237, 597 Epicatechin gallate..........................................603, 625
2' Deoxycytidine .......................................................568 Epigallocatechin........................................................625 H
2' Deoxyguanosine ..................................................568 Epigallocatechin gallate.................................603, 625 Heptabarbitone .........................................................643
2' Deoxyinosine ........................................................568 Estradiol......................................................................633 Hexaldehyde – DNPH..............................................584
Desethylatrazine .......................................................588 b -Estradiol.................................................................613 Hexazinon...................................................................588
Desethyldesisopropylatrazine................................588 Estriol ..........................................................................266 Hexogen (RDX) .................................................586-587
Desipramine...............................................................289 Estrone........................................................................613 Hexyl............................................................................586
Dextromethorphan ...................................................628 Ethanol ...............................................................582, 610 Histidine.............................................................396, 564
Diazepam...........................................................272, 289 Ethinylestradiol .........................................................633 Homocyclonite ..........................................................586
Dibenzo(a,h)anthracene..................................589-591 Ethoprophos...............................................................594 Homovanillic acid .....................................................623
Dichlorobenzidine............................................583, 598 Ethyl cinnamate........................................................599 Holotransferrin ..........................................................572
3,3-Dichlorobenzidine..............................................183 2-Ethylhexyl trans-4-methoxycinnamate ............607 Hydrastine ..................................................................625
2,4-Dichlorophenol ...................................................592 bis-(2-Ethylhexyl) phthalate ...................................507 Hydrochlorothiazide .................................................189
2,3-Dichlorophenoxyacetic acid............................591 Ethylhexyl salicylate ................................................259 Hydrocortisone........................................312, 613, 635
2,4-Dichlorophenoxyacetic acid............................591 2-Ethylhexyl salicylate.............................................607 Hydroflumethiazide ..................................................189
Diclofenac.................................................235, 615, 618 Ethylparaben............................................189, 272, 604 Hydroquinone ...........................................230-231, 584
Dienestrol ...................................................................633 Eugenol .......................................................................599 Hydroxyindoleaacetic acid .....................................623
Diethylstilbestrol.......................................................265 Excipent ......................................................................606 2-Hydroxy-4-methoxybenzophenone ...................607
Diflusinal............................................................235, 615 4-Hydroxyropivacaine ..............................................619
Dihydroxy benzylamine ...........................................623 Hydroxyproline .................................................396, 564
Dihydroxyphenyl acetic acid..................................623 F 5- Hydroxytryptamine ..............................................623
Dihydroxyphenyl alanine.........................................623 Famotidine..................................................................637
Diltiazen ......................................................................616 Fenfluramine..............................................................622
Dimethoxybenzidine.................................................598 Fenoprofen .................................................................622 I
3,3'-Dimethoxybenzidine ........................................583 Fenuron.......................................................................259 Ibuprofen ..................................................235, 396, 618
Dimethylbenzidine....................................................583 Fibrinogen..........................................................309, 392 IgA................................................................................421
2,3-Dimethyl phenol................................230-231, 530 Flunitrazepam............................................................289 IgG2a, I HOPC-1........................................................565
2,4-Dimethyl phenol.................................................592 Fluocinolone acetonide...........................................290 IgM, MOPC-104E......................................................565
2,5-Dimethyl phenol................................230-231, 530 Fluoranthene.............................................189, 589-591 Imazalil........................................................................594
3,4-Dimethyl phenol........................................231, 584 Fluorene.....................................................189, 589-591 Imidacloprid ...............................................................594
1,3-Dimethyluric acid...............................................617 Fluoride ..............................................................172, 175 Imipramine ...............................................289, 632, 635
Dimethylxanthine .....................................................276 2-Fluorobenzoic.........................................................623 Indeno(1,2,3-c,d)pyrene ..................................589-591
664
COMPOUND INDEX
Indole...........................................................................642 Methanol ....................................................................582 Norethindrone ...........................................................633

3-Indole acetic acid..................................................593 3-Methaxytyrosine ...................................................623 Norethindrone acetate............................................613
3-Indole butyric acid ................................................593 Methionine........................................................396, 564 Normorphine..............................................................631
3-Indole proprionic acid ..........................................593 Methoxyaniline .........................................................583 Nortriptyline............................250, 258, 289, 635-637
Inosine.........................................................................568 4-Methoxybenzenesulfonamide............................289 cis-10-OH-Nortriptyline ...........................................637
Insulin.......................370-371, 381-382, 462, 571-572 Methoxychlor, 200 mg/L........................................507 trans-10-OH-Nortriptyline.......................................637
Iodide...........................................................................172 Methyl-3-aminothiophene-2-carboxylate............289 Norvaline ...........................................................396, 564
Iso-erythritol...............................................................339 2-Methyl-4,6-dinitrophenol.....................................592
Isoleucine ...................................................................564 4,4-Methylene-bis-2-chloroaniline........................183
Isomaltose..................................................................600 2-Methyl-4-isothiazolin-3-one ...............................235 O
Isopropanol ................................................................582 1-Methyl naphthalene ............................................591 Octogen (HMX).........................................................587
Isoproturon.................................................................588 2-Methyl naphthalene ............................................591 Octylmethoxycinnamate .........................................250
2-Methyl-5-nitroaniline............................................183 Oleoylethanolamide (OEA)............................328, 614
Methyl paraben..............................189, 235, 580, 604 Orotic Acid .................................................................568
K Methyl prednisolone................................................290 Ovalbumin ......................................381, 407, 412, 421,
Kathon 1A ..................................................................580 Methyl salicylate ......................................................602 558-560, 572, 576
Kathon 1B...................................................................580 1-Methylxanthine .....................................................617 Oxalate ........................................................................174
Ketoprofen.........................................................235, 615 Metobromuron ..........................................................588 Oxalic acid.........................................................338, 389
Kinetin .........................................................................593 Metolachlor........................................................587-588 Oxybenzone.......................................................250, 259
Kresoxim-methyl.......................................................594 Metoprolol..................................................................613 Oxytetracycline..........................................................639
Metoxuron..................................................................588 Oxytocin......................................................................462
Miconazole.................................................................621
L Molybdate (VI) ..........................................................172
a-Lactalbumin.........................................391, 408, 578 Monolinuron .....................................................259, 588
P
Lactate ................................................................174-175 Monuron.....................................................................259 Padimate-O .......................................................259, 607
Lactic Acid ...............................................581, 338, 610 Morphine............................................................630-631 Palatinose...................................................................600
Lactoglobulin A.........................................................183 Morphine-6-glucuronide .........................................630 Palmatine ...................................................................625
Lactoglobulin B.........................................................183 Morphine-3-glucuronide ........................................630 Palmitoylethanolamide...................................236, 614
b -Lactoglobulin (A chain) ...................391, 408, 578 Myoglobin ......................370-371, 381-382, 407, 410, Pantothenic acid..............................................605, 612
b -Lactoglobulin (B chain)...........391, 408, 432, 578 421, 432, 571-572, 576 Parvalbumin...............................................................371
Lactose......................................................340, 600, 602 Penconazole ..............................................................594
Lamotrigine ................................................................642 Pencycuron ................................................................259
Leucine...............................................................396, 564 N Pentachlorophenol...................................................592
Leucine Enkephalin........................194, 370, 571-572 Nadolol...............................................................613, 640 iso-Pentane................................................................565
Lidocaine ..................................................266, 619, 640 Naphthalene ....................................189, 241, 589-591 Pentylparaben ...........................................................189
Lincomycin.................................................................620 1-Naphthol ................................................230-231, 584 Peonidin.............................................................237, 597
Linuron ...............................................................259, 588 1-Naphthyl acetamide.............................................593 Perphenazine.............................................................632
Lysine .................................................................396, 564 1-Naphthyl acetic acid ............................................593 Perylene......................................................................507
Lysozyme...............183, 370-371, 381-382, 400, 403, Naphthylamine.................................................583, 598 Petunidin ...........................................................237, 597
410, 558-560, 571-572, 576 Naproxen...........................................................241, 618 Phenacetin ......................................235, 615, 618, 622
Neurotensin..............................................381, 571-572 Phenanthrene...........................................189, 589-591
Niacin (B3)................................................605-606, 612 Phenobarbitone.........................................................643
M Niacinamide...............................................................607 Phenol.......................................................231, 240, 249,
Magnesium................................................................173 Nicotinic Acid............................................................607 299, 584, 592
Malate.........................................................................174 Nifedipine ..........................................................315, 640 Phenoxyacetic acid..................................................591
Maleate.......................................................................275 Nimodipine........................................................315, 640 2-Phenoxyethanol............................................235, 580
Maleic acid.................................................................628 Nisoldipine ........................................................315, 640 Phentermine ..............................................................622
Malic acid...................................................................610 Nitrate ................................................................172, 175 Phenylalanine (PHE) ..............................396, 564, 599
Maltose.......................................................................600 Nitrite .................................................................172, 175 Phenylbutazone ........................................................622
Maltotriose.................................................................340 2-Nitrobenzoic...........................................................623 Phenylephrine ...........................................................334
Malvidin .............................................................237, 597 3-Nitrobenzoic...........................................................623 Phosphate ..........................................................174-175
Mannitol ....................................................339-341, 604 2-Nitrophenol...................................230-231, 584, 592 Phthalic acid..............................................................623
Mefanamic acid ........................................................241 4-Nitrophenol...................................230-231, 584, 592 p-hydroxybenzoic acid.............................................232
Mepivacaine ..............................................................619 2-Nitrotoluene ...................................................586-587 Picric acid...................................................................586
Metacycline ...............................................................639 3-Nitrotoluene ...................................................586-587 Pindolol .....................................................613, 640, 642
Metazachlor...............................................................588 4-Nitrotoluene ...................................................586-587 Pioglitazone ...............................................................616
Met-Enkephalin........................................194, 571-572 Noradrenaline............................................................578 Pirenzepine ................................................................637
Metformin..........................................................325, 583 Nordiazepam..............................................................289 Piroxicam...........................................................235, 615
Methabenzthiazuron................................................588 Nordoxepin.................................................................289 Poly-DL-alanine.........................................................425
Methacrolein –DHCP...............................................584 Norepinephrine .........................................................623 Potassium...................................................................173
COMPOUND INDEX
Prednisolone.....................................................290, 632 Sorbic acid................................................290, 609, 621 o-Toluidine ................................................183, 583, 598
Prednisolone acetate...............................................290 Sorbitol.......................................................338-341, 604 Trehalulose.................................................................600
Procainamide....................................................616, 640 Stachyose..........................................................340, 604 Triamcinolone ...................................................290, 635
Procaine....................................................266, 619, 640 Succinate....................................................................174 Triamcinolone acetonide ........................................290
Progesterone ....................................................613, 638 Succinic Acid...........................................338, 581, 610 2,4,6-Trichlorophenol................................................592
Promethazine.............................................................632 Sucrose ....................................338, 340-341, 600, 604 2,4,5-Trichlorophenoxyacetic acid.........................591
Prometon....................................................................587 Sulfachloropyridazine ..............................................616 3,4,5-Trichlorophenoxyacetic acid.........................593
Prométryne........................................................587, 591 Sulfadiazine......................................249, 616, 640-641 2,4,5-Trichlorophenoxypropionic acid (Silvex)....591
Propanil..............................................................587, 591 Sulfadimethoxine.............................................616, 641 3,4,5-Trichlorophenoxyproprionic acid .................593
n-Propanol..................................................................582 Sulfamerazine..................................249, 616, 640-641 Triflupromazine..........................................................632
Propanolol ..................................................................636 Sulfamethazine ........................................616, 640-641 Trimipramine ...........................258, 289, 632, 635-636
Propazine...................................................587-588, 591 Sulfamethizole..................................................616, 641 1,3,5-Trinitrobenzene........................................586-587
Propionaldehyde – DNPH ......................................584 Sulfamethoxazole ..........................249, 258, 616, 632 2,4,6-Trinitrotoluene .........................................586-587
Propoxur .....................................................................594 Sulfamethoxypyridazine..........................................616 Tripelennamine..........................................................632
Propranolol......................................241, 613, 636, 640 Sulfanilamide............................................249, 640-641 Triphenylene...............................................................299
Propylparaben ..................................................189, 604 Sulfanilic acid ............................................................641 Triprolidine................................................275, 279, 617
Protriptyline..............................................396, 564, 632 Sulfapyridine..............................................................616 Tryptophan (TRP)....................................396, 459, 564
Pseudoephedrine....................................275, 617, 628 Sulfate........................................................172, 174-175 Tyrosine (TYR) .........................................396, 459, 564
Pymetrozine ...............................................................594 Sulfathiazole ............................................249, 616, 640 Tébuthiuron................................................................591
Pyrene .................................................................589-591 Sulfisoxazole..............................................................641
Pyridine ..............................................................249, 389 Sulfmethazine............................................................249
Pyridoxine...........................................................605-607 Sulfur ...........................................................................507 U
Pyridoxyl phosphate (B6) .......................................612 Sulindac .............................................................235, 615 Uracil...............240-241, 258, 299, 425-426, 564, 579
Pyrilamine...................................................................334 Uridine................................................................564, 568
Pyroglutamate ...........................................................174
Pyruvate......................................................................174 T
Talbarbitone ...............................................................643 V
Tartarate......................................................................175 Valeraldehyde – DNPH ...........................................584
Q Tartaric acid.......................................................338, 610 Valine..................................................................396, 564
Quercetin....................................................................266 Tebuthiuron ................................................................587 Valine3-Glyine4 (Na-acetylated) .................308, 390
Terbutylazine..............................................................588 Valine3-Valine4 (Na-acetylated)..................308, 390
Terphenyl-d14 ...........................................................591 Valine-tyrosine-valine ..............................................572
R o-Terphenyl.................................................................299 Vitamin A....................................................................605
Raffinose...................................................340, 600, 604 Testosterone .....................................................312, 613 Vitamin B12 ...............................................................421
Ranitidine...........................................................325, 583 Tetracaine..........................................................266, 619 Vitamin C...................................................605-606, 609
Reserpine...........................................................290, 299 2,3,4,6-Tetrachlorophenol........................................592 Vitamin D2..................................................................605
Resorcinol..................................................230-231, 584 Tetryl ....................................................................586-587 Vitamin D3..................................................................605
Retinol .........................................................................605 Theobromine............................................276, 316, 608 Vitamin E (a-VE)........................................................605
Retinol acetate..........................................................605 Theophylline ............................................276, 316, 334
Retinol palmitate ......................................................605 Thiabendazole ...........................................................594
Rhamnose ..................................................................600 Thiamine pyrophosphate (TPP) ............................594
W
Riboflavin (B2)..........................................605-606, 612 Thiamine (B1)...................................................607, 612 Warfarin .....................................................................640
Ribonuclease (RNase)...................371, 381, 571-572 Thiocyanate ...............................................................172
Ribonuclease A.......................370, 400, 403, 425-426, Thiosulfate .................................................................172
558-560, 571-572, 576 Thiourea.............................................................189, 590
X
Ribose..........................................................................600 Threonine (THR) ..............................................396, 564 Xanthosine-5’-monophosphate (XMP) ...............568
Ropivacaine................................................................619 Thymidine...................................................................564 Xylitol...........................................................................339
Thymine .............................................................564, 579 Xylose..........................................................................600
Thymol ........................................................................602
S Thyroglobulin...................................421, 425-426, 432
Saccharin....................................................................232 a-Tocopherol.....................................................605, 608
Saccharose ................................................................600 b-Tocopherol ..............................................................608
Salicylic acid ...................................235, 290, 618, 621 g-Tocopherol......................................................605, 608
Sarcosine...........................................................396, 564 Tocopherol acetate...................................................605
Scopolamine .....................................................275, 617 o-Tolidine.....................................................................598
Sebutylazine...............................................................588 Tolmetin ...........................................235, 615, 618, 622
Selenate......................................................................175 m-Tolualdehyde – DNPH.........................................584
Serine .................................................................396, 564 Toluene..............................................240, 299, 589-591
Simazine .............................................................587-588 m-Toluic.......................................................................623
Sodium ........................................................................173 m-Toluidine.................................................................585
666
ORDERING INFORMATION
Ordering Information
Easy Ordering Terms and Conditions
Discounts and Delivery
Agilent Technologies specializes in fast delivery. In the US, if you call before 2 PM EST, we will ship your
order that day. You may also request overnight express delivery before 6 PM EST and you will have your
order the next day. Volume discounts on a variety of individual products are offered when the entire quantity
is shipped to one address at one time.
A shipping and handling fee will be added to your order unless the purchase is over $2000 US for orders
place online or over $4000 for orders place via phone. Special shipping (i.e., overnight in the US) is
available in most regions at an additional cost.
Agilent is required to collect all state and local sales taxes unless the buyer's tax-exempt certificate is on file
with Agilent Technologies. Please be prepared to provide a copy if it is not on file, when placing your order.
Please check with your Agilent Customer Service Representative, local Authorized Distributor, or the Agilent
website for current prices, special offers, promotions and discounts when placing your order.
Satisfaction Guaranteed
If you are not satisfied with your Agilent product within the first 60 days, you may return your purchase in its
original condition for a full refund or credit. A return policy statement is included in every Agilent shipment
and posted under Product Information on the website. In the US and Canada, please call for a Return
Authorization form and return instructions at 1-800-227-9770. If your Agilent product was purchased from
a distributor, please contact the distributor.
Shipping Damages
If items are damages in transit, please follow the instructions below:
• If a shipment is visibly damaged upon arrival, do not accept it until the person making the delivery has
endorsed the bill of lading with statement for the extent of the damage.
• If any damage is found after unpacking, retain all cartons and inner packaging and immediately
request an inspection from the carrier.
• Notify the Agilent Customer Contact Center at 1-800-227-9770 about the damaged shipment so that
we can make the appropriate sales adjustment and/or provide you with return instructions (Sales order
number, product number and quantity damaged will be needed).
Easy Ways To Order

• Phone: 1-800-227-9770 (option 1, 1) in the US and Canada – Mon-Fri, 8AM to 8PM EST
• Fax: 1-302-633-8901 in the US
• Email: cag_sales-na@agilent.com in the US and Canada
• Online: www.agilent.com/chem in the US and Canada
Payment Options
• In the US, Visa, MasterCard, Discover and American Express are accepted with a minimum order of
$20 (not applicable in all countries).
• Email ePay@agilent.com to make an electronic payment using the ACH/EFT (Automated Clearing
House/Electronic Funds Transfer) method.
• Establish a charge account through your Agilent Customer Service Representative or Your Local Agilent
sales office. An account number will be assigned to you for charging your purchases. Payment terms
are net 30 days from the invoice date. All orders are subject to credit approval.
We will be happy to supply a price quote via, phone, email or fax if you need it in writing.
Warranties
All Agilent Technologies products in this catalog are designed and manufactured to stringent standards
under the Agilent quality system registered to ISO 9001. At Agilent, we back every product with a 90-day
warranty and a money-back guarantee. If Agilent receives notice of defects during the warranty period.
Agilent shall, at its option, either repair or replace products which prove to be defective. If Agilent is unable,
within a reasonable time, to repair or replace any product to a condition as warranted, the buyer shall be
entitled to a refund of the purchase price upon return of the product to Agilent. The warranty period for
each product begins on the day of shipment.
This warranty shall not apply to any defect, failure, or damage caused by improper use or improper or
inadequate maintenance or care. This warranty is exclusive and no other warranty, whether written or oral,
is expressed or implied. Agilent specifically disclaims the implied warranties of merchantability and fitness
for particular purposes. The remedies provided herein are the buyer's sole and exclusive remedies. In no
event shall Agilent be liable for direct, indirect, special, incidental, or consequential damages (including loss
of profits) whether based on contract, tort, or any other legal theory.
668
Agilent Technologies Order Form Agilent Technologies

Outside the U.S. and Canada, please contact your local Agilent office or Authorized Distributor when ordering.
Order Date Purchase Order or Credit Card Number & Expiration Taxable Yes No
Y or N?
Name: If No, please provide Certificate #
Title:
Phone: Fax:
Company: Email:
Shipping Address Billing Address
Company:
Street:
Room/Bldg/Dept:
City:
State/Province/Country:
Zip/Postal Code:
Deliver to:
Part Number Description Quantity Price Total Cost
Special Instructions: Subtotal:
Tax:
Total:
For Assistance: Please call the Agilent Technologies Customer Contact Center at 1-800-227-9770 (U.S. and Canada)
Email Node: cag_sales-na@agilent.com
Fax Number: 302-633-8901 U.S. and Canada
Note: 1. All pricing, tax, discount, and availability information is subject to verification by Agilent Technologies.
2. Shipping and handling is free for orders over $2000 US.

Y or N?
Title:
Phone: Fax:
Company: Email:
Company:
Street:
Room/Bldg/Dept:
City:
Zip/Postal Code:
Deliver to:
Tax:
Total:
670

Y or N?
Title:
Phone: Fax:
Company: Email:
Company:
Street:
Room/Bldg/Dept:
City:
Zip/Postal Code:
Deliver to:
Tax:
Total:
NOTES
672
THE ESSENTIAL CHROMATOGRAPHY & SPECTROSCOPY CATALOG LC & LC/MS
For more information
Buy online:
www.agilent.com/chem/store
Contact us:
www.agilent.com/chem/contactus
This information is subject to change without notice.

© Agilent Technologies, Inc. 2012
Printed in Canada October 31, 2012
LC AND LC/MS
5991-1059EN
Scan the QR code

with your smartphone
for more information
Your Essential Resource for Columns & Supplies

5991-1059EN LC - Supplycatalogo

Uploaded by

Copyright:

Available Formats

5991-1059EN LC - Supplycatalogo

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

5991-1059EN LC - Supplycatalogo

Uploaded by

Copyright:

Available Formats

THE ESSENTIAL CHROMATOGRAPHY & SPECTROSCOPY CATALOG LC & LC/MS

For more information

This information is subject to change without notice.

Scan the QR code

Your Essential Resource for Columns & Supplies

General Chromatography Supplies – Minimize contamination and ensure accurate,

Environmental Traditional Lab Informatics

Energy and Fuels

Drug manufacturing requires the accuracy, sensitivity

Agilent Service and Support

Focus on what you do best

Get the Agilent

Agilent Compliance Services

Agilent Education and Consulting Services

• Classroom and on-site training in instrument operation, troubleshooting and maintenance

the Agilent value Promise –

For more detailed information,

technical Support at work for you

need more information?

A Portfolio of Analytical LC Solutions

Agilent 1290 Infinity LC – Infinitely more powerful

Agilent 1260 Infinity LC – Infinitely more confident

Agilent 1220 Infinity LC – Infinitely more affordable

Agilent 1260 Infinity Capillary LC System

Agilent 1260 Infinity nanoflow LC System for MS

Agilent 1260 Infinity hPLC-Chip/MS System

Agilent 6000 Series LC/MS Solutions

Agilent 6100 Series Single Quadrupole LC/MS Systems

Agilent 6200 Series Accurate-Mass tOF LC/MS Systems

Agilent 6400 Series triple Quadrupole LC/MS Systems

Agilent 6500 Series Accurate-Mass Q-tOF LC/MS Systems

Agilent ZOrBAX 300 StableBond Columns

Agilent Poroshell Columns

Agilent ZOrBAX rrhd hILIC Plus

Plastic tubing cutter, 8710-1930

Tubing clip, 5042-9967

HPLC In-Line Filters

hPLC In-Line Filters

• Degasses eluents as particulates are removed

Agilent Rack for LC Systems

• Easy assembly saves time and expense (see diagram)

description Part no.

Agilent rack for LC systems, 5001-3726

tIPS & tOOLS

Engineering of Agilent Capillaries

Advantages for Bio Capillaries

• Laser-welded capillary tip for precise capillary cut

recommended hPLC Stack Configuration

Agilent 1290 Infinity LC: Agilent 1290 Infinity LC:

Needle Seat Capillary:

Syntax for capillary description

type Material Fitting Left/Fitting right

At-a-glance color-coding keys

Agilent capillary supplies are made

Stainless Steel: good resistance to pitting corrosion

titanium: high inertness for biological applications

Stainless Steel-coated PEEK:

PEEK-coated fused silica: rugged and pliable

PEEK: durable and abrasion-resistant