Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
2K views

1.1 Aql Sampling Table (Source: Jis Z 9015) : Sample Size Code Letters

This document provides tables for determining sample sizes and acceptance/rejection numbers for quality inspections based on acceptable quality levels (AQLs) and lot sizes. The tables specify single sampling plans for normal and severe inspections across AQL levels from 0.010 to 1000 using sample sizes coded by letters from A to R that increase with lot size. The tables are used to establish appropriate inspection parameters based on the inspection type and AQL for a given lot size.

Uploaded by

alliceyew
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

1.1 Aql Sampling Table (Source: Jis Z 9015) : Sample Size Code Letters

This document provides tables for determining sample sizes and acceptance/rejection numbers for quality inspections based on acceptable quality levels (AQLs) and lot sizes. The tables specify single sampling plans for normal and severe inspections across AQL levels from 0.010 to 1000 using sample sizes coded by letters from A to R that increase with lot size. The tables are used to establish appropriate inspection parameters based on the inspection type and AQL for a given lot size.

Uploaded by

alliceyew
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1.

1 AQL SAMPLING TABLE (SOURCE: JIS Z 9015)

SAMPLE SIZE CODE LETTERS

Special inspection level Normal inspection level


Lot size
S−1 S−2 S−3 S−4 I II III
1- 8 A A A A A A B
9- 15 A A A A A B C
16- 25 A A B B B C D
26- 50 A B B C C D E
51- 90 B B C C C E F
91- 150 B B C D D F G
151- 280 B C D E E G H
281- 500 B C D E F H J
501- 1200 C C E F G J K
1201- 3200 C D E G H K L
3201- 10000 C D F G J L M
10001- 35000 C D F H K M N
35001-150000 D E G J L N P
150001-500000 D E G J M P Q
500001 up D E H K N Q R

Specify suitable AQLs selecting from 16 levels in a range from 0.010 to 10 for inspections using percent defective (%);
or 26 levels from 0.010 to 1,000 for inspections using defectives per 100units. Unless otherwise specified, use Inspection Standard II.
SINGLE SAMPLING PLANS FOR NORMAL INSPECTION (MASTER TABLE)

Acceptable quality level (AQL) (Normal inspection)


Sample
size Sample
code size 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000
letter
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re

A 2 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31

B 3 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31 44 45

C 5 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31 44 45

D 8 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31 44 45

E 0 1 1 2 2 3 3 4 5 6 7
AQL SAMPLING TABLE (Continued-I)

13 8 10 11 14 15 21 22 30 31 44 45

F 20 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

G 32 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

H 50 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

J 80 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

K 125 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

L 200 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

M 315 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

N 500 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

P 800 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

Q 1250 0 1 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

R 2000 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

: Use first sampling plan below arrow. If sample size equals or exceeds lot size do 100% inspection.
: Use first sampling plan above arrow.
Ac : Acceptance number
Re : Rejection numbe
ATTACHED TABLES
SINGLE SAMPLING PLANS FOR SEVERE INSPECTION (MASTER TABLE)

Acceptable quality level (AQL) (Severe Inspection)


Sample
size Sample
code size 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000
letter
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re

A 2 1 2 2 3 3 4 5 6 8 9 12 13 18 19 27 28

B 3 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19 27 28 41 42

C 5 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19 27 28 41 42

D 8 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19 27 28 41 42

E 13 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19 27 28 41 42
AQL SAMPLING TABLE (Continued-II)

F 20 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

G 32 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

H 50 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

J 80 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

K 125 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

L 200 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

M 315 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

N 500 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

P 800 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

Q 1250 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

R 2000 0 1 1 2 2 3 3 4 5 6 8 9 12 13 18 19

S 3150 1 2

: Use first sampling plan below arrow. If sample size equals or exceeds lot size do 100% inspection.
: Use first sampling plan above arrow.
Ac : Acceptance number
Re : Rejection numbe
ATTACHED TABLES
SINGLE SAMPLING PLANS FOR SLACK INSPECTION (MASTER TABLE)

Acceptable quality level (AQL) (Slack inspection) †


Sample
size Sample 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000
code size
letter
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re

A 2 1 2 2 3 2 4 3 5 5 6 7 8 10 11 14 15 21 22 30 31

B 2 0 2 1 3 2 3 2 4 3 5 5 6 7 8 10 11 14 15 21 22 30 31

C 2 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13 14 17 21 24

D 3 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13 14 17 21 24

E 5 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13 14 17 21 24
AQL SAMPLING TABLE (Continued-III)

F 8 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

G 13 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

H 20 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

J 32 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

K 50 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

L 80 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

M 125 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

N 200 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

P 315 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

Q 500 0 1 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

R 800 1 2 1 3 2 4 2 5 3 6 5 8 7 10 10 13

: Use first sampling plan below arrow. If sample size equals or exceeds lot size do 100% inspection.
: Use first sampling plan above arrow.
Ac : Acceptance number
Re : Rejection numbe
ATTACHED TABLES

† : The lot is accepted when failures are greater than Ac but less than Re. Subsequent lots are, however, subject to normal inspection.

You might also like