Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 487 views

    Inj - Pump Calibration Data: Daewoo

    Uploaded by

    Евгений Абрамов
    This document provides calibration data for an injection pump, including: 1) Injection order, opening pressures, nozzle and injection pipe specifications for standard and engine part conditions. 2) Rack diagram positions and injection quantities at various rack positions and pump speeds. 3) Boost pressure dependent full-load stop check points and pressures. 4) Governor, idle, start, and boost compensator spring specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Inj - Pump Calibration Data: Daewoo

    Uploaded by

    Евгений Абрамов
    487 views1 page
    This document provides calibration data for an injection pump, including: 1) Injection order, opening pressures, nozzle and injection pipe specifications for standard and engine part conditions. 2) Rack diagram positions and injection quantities at various rack positions and pump speeds. 3) Boost pressure dependent full-load stop check points and pressures. 4) Governor, idle, start, and boost compensator spring specifications.

    Original Description:

    Doosan S340

    Original Title

    ТНВД S340

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides calibration data for an injection pump, including: 1) Injection order, opening pressures, nozzle and injection pipe specifications for standard and engine part conditions. 2) Rack diagram positions and injection quantities at various rack positions and pump speeds. 3) Boost pressure dependent full-load stop check points and pressures. 4) Governor, idle, start, and boost compensator spring specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    487 views1 page

    Inj - Pump Calibration Data: Daewoo

    Uploaded by

    Евгений Абрамов
    This document provides calibration data for an injection pump, including: 1) Injection order, opening pressures, nozzle and injection pipe specifications for standard and engine part conditions. 2) Rack diagram positions and injection quantities at various rack positions and pump speeds. 3) Boost pressure dependent full-load stop check points and pressures. 4) Governor, idle, start, and boost compensator spring specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    MAKER NO 106675-461C

    INJ.PUMP CALIBRATION DATA


    DHI NO 65.11101-7362A
    DATE 2003. .
    E/G MODEL DE12TIS SUFFIX ECIEC
    DAEWOO FOR USE S340LC-V
    INJ.PUMP BODY GOVERNOR
    INJ. ORDER 1-5-3--6-2-4 (DRIVE SIDE) PHASING 0-60-120-180-240-300
    2
    OPENING PRESSURE:1st 160kgf/cm
    NOZZLE & HOLDER ASS'Y 105780-8460 2nd 220kgf/cm2
    (A) STANDARD
    CONDITION INJECTION PIPE(I_D, O_D, L) dia8.0×dia3.0 - 600 mm dia6.0×dia2.2 - 650 mm
    FOR RIG
    TEST OIL CALIBRATION OIL TEMPERATURE : 40±5 °C
    105025-2240
    (B) ENGINE NOZZLE & HOLDER ASS'Y
    PARTS 105030-4711
    CONDITION
    INJECTION PIPE(I_D, L)

    RACK DIAGRAM AND SETTING VALUE AT EACH POINT


    INJECTION Q'TY ON RIG
    CHECK RACK PUMP (mm3/1000ST) PRESS
    POINT POSITION SPEED (A) (B) ENGINE
    (mm) (RPM) STANDARD PARTS (mmHg)
    CONDITION CONDITION
    A R1(10.4) 950 135±2 - above600
    RACK POSITION mm

    B = 6.3 500 16±15 - 0


    C R1+0.5 500 (150) - above600

    NOTCH : APPROX 14
    INJECTION PUMP SPEED, rpm

    BOOST PRESSURE DEPENDENT FULL-LOAD STOP(BOOST COMPENSATOR SPRING OPERATING POINT)


    INJECTION Q'TY ON RIG
    CHECK RACK PUMP (mm3/1000ST) PRESS
    POINT POSITION SPEED (A) (B) ENGINE
    (mm) (RPM) STANDARD PARTS (mmHg)
    CONDITION CONDITION
    P1 R2(R1+0.5) 500 - - 300
    P2 R2-0.7 500 - - 500
    - - - - - -
    - - - - - -

    BCS SPRING : k=0.51kgf/mm

    WEIGHT WEIGHT=740g LEVER RATIO(min/max) MIN. SPEED 1:1.2


    MAX. SPEED 1:1.2
    GOVERNOR SPRING K=7.2kgf/mm PLUNGER dia12, 22+45LEAD
    3
    IDLE SPRING K=1.9kgf/mm D/V RETRACTION VOLUME 130mm /st
    2
    START SPRING K=0.01kgf/mm D/V OPENING PRESSURE 19.6kgf/cm

    BOOST COMPENSATOR SPRING K=0.51kgf/mm D/V SPRING k=0.87kgf/mm

    FEED PUMP TIMER -

    REMARK DRY WEIGHT


    STATIC INJECTION TIMING : BTDC 7°
    Kg

    You might also like