Service Manual: Monitor With DVD Receiver

SERVICE MANUAL
MONITOR WITH DVD RECEIVER

SERVICE MANUAL
2
2012
WA022<Rev.001>
B53-0932-00
DDX3021, DDX3049, DDX3051, DDX319, DDX4021BT,
DDX4031, DDX4031BT, DDX4031BTM, DDX4031M,
DDX4049BT, DDX4051BT, DDX419
DC cord * DC cord *
(E30-8233-08) (E30-8232-08)
Microphone * Car cable (PRK) *

(W01-2009-08) (E30-8234-08)
(3m)
Escutcheon * Escutcheon * Mounting hardware assy * Lever *

(B07-3263-02) (B07-3363-02) (J22-0657-03) (D10-7012-04) x2
Screw set * Car cable (ST REMO) * Remote controller assy * Size AAA battery
(N99-1822-05) (W01-2004-15) (A70-2083-15) (Not supplied)
* It uses it by some models. Refer to the parts list.

RC-DV340
This product uses Lead Free solder.
PbF
This product complies with the RoHS directive for the European market.
COPYRIGHT © 2012 JVC KENWOOD Corporation
B53-0932-00 COPYRIGHT © 2012 JVC KENWOOD Corporation No.WA022<Rev.001>

2012/2
SPECIFICATION
Models for destination "K&R"
Monitor section
Picture Size 6.1 inches (diagonal) wide 136.2 mm (W) × 72 mm (H)
Display System Transparent TN LCD panel
Drive System TFT active matrix system
Number of Pixels 1,152,000 (800H × 480V × RGB)
Effective Pixels 99.99%
Pixel Arrangement RGB striped arrangement
Back Lighting LED
DVD player section
D/A Converter 24 bit
Audio Decoder Linear PCM/Dolby Digital/dts/MP3/WMA/AAC/WAV
Video Decoder MPEG1/MPEG2/DivX [DDX4049BT/DDX3049]
Wow & Flutter Below Measurable Limit
Frequency Sampling frequency: 96 kHz 20 - 22,000 Hz
Response Sampling frequency: 48 kHz 20 - 22,000 Hz
Sampling frequency: 44.1 kHz 20 - 20,000 Hz
Total Harmonic Distortion 0.010% (1 kHz)
S/N Ratio (dB) 99 dB (DVD-Video 96 kHz)
Dynamic Range 98 dB (DVD-Video 96 kHz)
Disc Format DVD-Video/VIDEO-CD/CD-DA
Sampling frequency 44.1/48/96 kHz
Quantifying Bit Number 16/20/24 bit
USB interface section
USB Standard USB 2.0 Full Speed
File System FAT 16/32
Maximum Power Supply Current DC 5 V 1 A
D/A Converter 24 Bit
Video Decoder MPEG1/MPEG2/DivX [DDX4049BT/DDX3049]
Audio Decoder MP3/WMA/AAC/WAV (Linear PCM)
Bluetooth section [DDX419/DDX4049BT]
Technology Bluetooth 2.0 Certified
Frequency 2.402 - 2.480 GHz
Output Power +4dBm (MAX), 0dBm (AVE), Power Class2
Maximum Communication range Line of sight approx. 10m (32.8 ft)
Profile HFP (Hands Free Profile), OPP (Object Push Profile), PBAP (Phonebook Access
Profile), A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Video Remote
Control Profile)
(No.WA022<Rev.001>)2/36
FM tuner section
Frequency Range 200 kHz: 87.9 MHz - 107.9 MHz [DDX419/DDX319]
50 kHz: 87.5 MHz - 108.0 MHz [DDX4049BT/DDX3049]
Usable Sensitivity (S/N: 30 dB) 9.3 dBf (0.8 µV/75 Ω)
Quieting Sensitivity (S/N: 50 dB) 15.2 dBf (1.6 µV/75 Ω)
Frequency Response (± 3.0 dB) 30 Hz - 15 kHz
S/N Ratio (dB) 70 dB (MONO)
Selectivity (± 400 kHz) ≥ 65 dB
Stereo Separation 40 dB (1 kHz)
AM tuner section
Frequency Range (10 kHz) 530 kHz - 1 700 kHz
Usable Sensitivity 28 dBµ
Video section
Color System of External Video Input NTSC/PAL
External Video Input Level (RCA/mini jack) 1 Vp-p/ 75 Ω
External Audio Max Input Level 2 V/ 25 kΩ
(RCA/mini jack)
Video Output Level (RCA jack) 1 Vp-p/ 75 Ω
Audio Output Level (mini jack) 1.2 V/ 10 kΩ
Analog RGB input 0.7 Vp-p/ 75 Ω
Audio section
Maximum Power (Front & Rear) 50 W × 4
Full Bandwidth Power (Front & Rear) 22 W × 4
(4 Ω, 14.4 V, 1% THD)
Preout Level (V) 4 V/10 kΩ
Preout Impedance ≤ 600 Ω
Speaker Impedance 4-8Ω
Tone Bass 100 Hz ± 8 dB
Middle 1 kHz ± 8 dB
Treble 12.5 kHz ± 8 dB
General
Operating Voltage 14.4 V (10.5 - 16 V allowable)
Maximum Current Consumption 10 A
Dimensions (W × H × D) 182 × 112 × 163 mm (7-3/16 × 4-7/16 × 6-7/16 inch)
Operational Temperature Range -10°C - +60°C
Storage Temperature Range -20°C - +85°C
Weight 2.0 kg (4.4 lbs)
• Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incor-
rectly.
• Specifications are subject to change without notice.
(No.WA022<Rev.001>)3/36
SPECIFICATION
Models for destination "E&Q"
Monitor section
Back Lighting LED
DVD player section
Video Decoder MPEG1/MPEG2/DivX
Bluetooth section [DDX4021BT/DDX4051BT]
Control Profile)
(No.WA022<Rev.001>)4/36
FM tuner section
Frequency Range (50 kHz) 87.5 MH z - 1 08.0 MH z
Usable Sensitivity (S/N: 26 dB) 0.7 µV/75 Ω
Quieting Sensitivity (S/N: 46 dB) 1.6 µV/75 Ω
LW tuner section
Frequency Range (9 kHz) 153 kHz - 279 kHz
Usable Sensitivity 45 µv
MW tuner section
Frequency Range (9 kHz) 531 kHz - 1611 kHz
Usable Sensitivity 25 µV
Video section
(RCA/mini jack)
Audio section
Full Bandwidth Power (Front & Rear) 30 W × 4
(PWR DIN 45324, +B=14.4V)
General
Dimensions (W × H × D) 182 × 112 × 163 mm
Weight 2.0 kg
rectly.
(No.WA022<Rev.001>)5/36
SPECIFICATION
Models for destination "X&C&M"
Monitor section
Back Lighting LED
DVD player section
Bluetooth section [DDX4031BT/DDX4031BTM]
Control Profile)
(No.WA022<Rev.001>)6/36
FM tuner section
Frequency Range 200 kHz: 87.9 MHz - 107.9 MHz (Region 4/6 models only)
50 kHz: 87.5 MHz - 108.0 MHz
Usable Sensitivity (S/N: 26 dB) 9.3 dBf (0.8 µV/75 Ω)
Quieting Sensitivity (S/N: 46 dB) 15.2 dBf (1.6 µV/75 Ω)
AM tuner section
Frequency AM (10 kHz) 530 kHz - 1700 kHz (Region 4/6 models only)
Range LW (9 kHz) 153 kHz - 279 kHz
MW (9 kHz) 531 kHz - 1611 kHz
Usable Sen- AM 28 dBµ

sitivity LW 45 µV
MW 25 µV
Video section
(RCA/mini jack)
Audio section
Full Bandwidth Power (Front & Rear)(at less 22 W × 4
than 1% THD)
General
Dimensions (W × H × D) 182 × 112 × 163 mm
Weight 2.0 kg
rectly.
(No.WA022<Rev.001>)7/36
SECTION 1
PRECAUTION
1.1 Safety Precautions
(1) This design of this product contains special hardware and voltmeter.
many circuits and components specially for safety purpos- Move the resistor connection to each exposed metal
es. For continued protection, no changes should be made part, particularly any exposed metal part having a return
to the original design unless authorized in writing by the path to the chassis, and measure the AC voltage across
manufacturer. Replacement parts must be identical to the resistor. Now, reverse the plug in the AC outlet and
those used in the original circuits. Services should be per- repeat each measurement. Voltage measured any must
formed by qualified personnel only. not exceed 0.75 V AC (r.m.s.). This corresponds to 0.5
mA AC (r.m.s.).
(2) Alterations of the design or circuitry of the product should
AC VOLTMETER
not be made. Any design alterations of the product should (Having 1000
not be made. Any design alterations or additions will void ohms/volts,
the manufacturers warranty and will further relieve the or more sensitivity)
manufacture of responsibility for personal injury or property
damage resulting therefrom. 0.15 F AC TYPE
Place this
(3) Many electrical and mechanical parts in the products have probe on
special safety-related characteristics. These characteris- each exposed
tics are often not evident from visual inspection nor can the 1500 10W metal part.
protection afforded by them necessarily be obtained by us-
ing replacement components rated for higher voltage, watt- Good earth ground
age, etc. Replacement parts which have these special
safety characteristics are identified in the Parts List of Ser-
vice Manual. Electrical components having such features 1.2 Warning
are identified by shading on the schematics and by ( ) on (1) This equipment has been designed and manufactured to
the Parts List in the Service Manual. The use of a substitute meet international safety standards.
replacement which does not have the same safety charac- (2) It is the legal responsibility of the repairer to ensure that
teristics as the recommended replacement parts shown in these safety standards are maintained.
the Parts List of Service Manual may create shock, fire, or (3) Repairs must be made in accordance with the relevant
other hazards. safety standards.
(4) It is essential that safety critical components are replaced
(4) The leads in the products are routed and dressed with ties, by approved parts.
clamps, tubings, barriers and the like to be separated from (5) If mains voltage selector is provided, check setting for local
live parts, high temperature parts, moving parts and/or voltage.
sharp edges for the prevention of electric shock and fire
hazard. When service is required, the original lead routing
and dress should be observed, and it should be confirmed 1.3 Caution
that they have been returned to normal, after reassem- Burrs formed during molding may be left over on some parts
bling. of the chassis.
Therefore, pay attention to such burrs in the case of pre-
(5) Leakage shock hazard testing forming repair of this system.
After reassembling the product, always perform an isola-
tion check on the exposed metal parts of the product (an-
tenna terminals, knobs, metal cabinet, screw heads, 1.4 Critical parts for safety
headphone jack, control shafts, etc.) to be sure the product
is safe to operate without danger of electrical shock.Do not In regard with component parts appearing on the silk-screen
use a line isolation transformer during this check. printed side (parts side) of the PWB diagrams, the parts that are
• Plug the AC line cord directly into the AC outlet. Using a printed over with black such as the resistor ( ), diode ( )
"Leakage Current Tester", measure the leakage current and ICP ( ) or identified by the " " mark nearby are critical
from each exposed metal parts of the cabinet, particular- for safety. When replacing them, be sure to use the parts of the
ly any exposed metal part having a return path to the same type and rating as specified by the manufacturer.
chassis, to a known good earth ground. Any leakage cur- (This regulation dose not Except the J and C version)
rent must not exceed 0.5mA AC (r.m.s.).
• Alternate check method
Plug the AC line cord directly into the AC outlet. Use an
AC voltmeter having, 1,000Ω per volt or more sensitivity
in the following manner. Connect a 1,500Ω 10W resistor
paralleled by a 0.15µF AC-type capacitor between an ex-
posed metal part and a known good earth ground.
Measure the AC voltage across the resistor with the AC
(No.WA022<Rev.001>)8/36
1.5 Preventing static electricity
Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser
diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.
1.5.1 Grounding to prevent damage by static electricity
Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as laser products.
Be careful to use proper grounding in the area where repairs are being performed.
(1) Ground the workbench
Ground the workbench by laying conductive material (such as a conductive sheet) or an iron plate over it before placing the
traverse unit (optical pickup) on it.
(2) Ground yourself
Use an anti-static wrist strap to release any static electricity built up in your body.
(caption)
Anti-static wrist strap
1M
Conductive material
(conductive sheet) or iron palate
(3) Handling the optical pickup
• In order to maintain quality during transport and before installation, both sides of the laser diode on the replacement optical
pickup are shorted. After replacement, return the shorted parts to their original condition.
(Refer to the text.)
• Do not use a tester to check the condition of the laser diode in the optical pickup. The tester's internal power source can easily
destroy the laser diode.
1.6 Handling the traverse unit (optical pickup)

(1) Do not subject the traverse unit (optical pickup) to strong shocks, as it is a sensitive, complex unit.
(2) Cut off the shorted part of the flexible cable using nippers, etc. after replacing the optical pickup. For specific details, refer to the
replacement procedure in the text. Remove the anti-static pin when replacing the traverse unit. Be careful not to take too long a
time when attaching it to the connector.
(3) Handle the flexible cable carefully as it may break when subjected to strong force.
(4) I t is not possible to adjust the semi-fixed resistor that adjusts the laser power. Do not turn it.
1.7 Attention when traverse unit is decomposed

*Please refer to "Disassembly method" in the text for the pickup unit.
• Apply solder to the short land sections before the FFC wire is disconnected from the connector on the servo board. (If the FFC wire
is disconnected without applying solder, the pickup may be destroyed by static electricity.)
• In the assembly, be sure to remove solder from the short land sections after connecting the FFC wire.
Solder short part
(No.WA022<Rev.001>)9/36
1.8 Important for laser products
1.CLASS 1 LASER PRODUCT 5.CAUTION : If safety switches malfunction, the laser is able
to function.
2.CAUTION :
(For U.S.A.) Visible and/or invisible class II laser radiation 6.CAUTION : Use of controls, adjustments or performance of
when open. Do not stare into beam. procedures other than those specified here in may result in
(Others) Visible and/or invisible class 1M laser radiation hazardous radiation exposure.
when open. Do not view directly with optical instruments.
3.CAUTION : Visible and/or invisible laser radiation when

open and inter lock failed or defeated. Avoid direct
exposure to beam. ! Please use enough caution not to
see the beam directly or touch it
4.CAUTION : This laser product uses visible and/or invisible
laser radiation and is equipped with safety switches which in case of an adjustment or operation
prevent emission of radiation when the drawer is open and
the safety interlocks have failed or are defeated. It is check.
dangerous to defeat the safety switches.
(No.WA022<Rev.001>)10/36
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
2.1 Identifying the DVD Mechanism
This unit is equipped with one of the two DVD mechanism types below.
• FMU-XS2-21D
• FMU-XS2-41D
Before sending the mechanism for repair, please check the following and refer to the corresponding materials.
SPECIFICATION
MODEL NAME STAMP No.
FMU-XS2-11D S21
FMU-XS2-21D S22
FMU-XS2-31D S23
FMU-XS2-41D S24
FMU-XS3-11D S31
FMU-XS3-21D S32
Chassis Stamp Print on Right Side of Mechanism
(No.WA022<Rev.001>)11/36
2.2 COMPONENTS DESCRIPTION
2.2.1 MAIN UNIT Ref. No. Application / Function Operation / Condition / Compatibility
Ref. No. Application / Function Operation / Condition / Compatibility Q1501 Transistor AMUTE control
IC11 Tuner IC FM/AM Tuner Q1502 Transistor AMUTE control
IC101 Power IC Power AMP Q1503 Transistor AMUTE control
IC141 Electoric Vol IC Audio Vol Control, Audio Signal Q1504 Transistor AMUTE control
Select
Q1505 Transistor AMUTE control
IC152 AND Logic IC Navi(SXI) TX 5.0V→3.3V convert
IC153 AND Logic IC Navi(SXI) RX 3.3V→5.0V convert
IC181 Analogue IC Audio Isolation AMP
Q1541 Transistor SXI PWREN cntrol
IC191 OP-AMP X 2 DVD Audio LPF
Q1542 Transistor SXI PWREN cntrol
IC261 Vdeo selector IC RGB or YCbCr selector
Q1942 Transistor PARKING control
IC701 MCU IC System control IC
IC721 EEPROM Memory
IC731 Voltage detect IC Reset signal generate at 2.4V
Q1951 Transistor ILUMI control
IC751 AND Logic IC REMOCON signal MIX curcuit
Q1961 Transistor REVERSE control
IC801 Regulator System DC Regulator IC
Q8021 Transistor DCDC ERROR_DET
IC802 Regulator D5V DCDCconvertor IC
IC803 DCDCcontrol IC D3.3V/24.5V/-20V DCDC con-
Q8101 SW FET DCDC SW FET (D3.3V)
vertor IC
Q8102 Transistor DCDC control
IC821 Regulator For BU3.3V Regulator IC
IC831 Regulator USB5V DCDCconvertor IC
IC851 Regulator 15V Regulator IC
Q8201 SW FET DCDC SW FET (24.5V-20V)
IC931 SW FET STREMO control
Q717 Transistor SI control
Q791 Transistor TOUCH control
Q801 Transistor System DC control 2.2.2 SUB UNIT
Q802 Transistor System DC control Ref. No. Application / Function Operation / Condition / Compatibility
Q803 Transistor System DC control IC201 Video buffer AVOUT Video driver with LPF
Q804 Transistor System DC control IC211 Video selector IC Video selector to AVOUT
Q805 Transistor System DC control IC231 Video selector IC Video selector to LCD
Q821 Transistor 3.3V Power Supply control IC241 Analogue IC VIDEO Isolation AMP
Q822 Transistor 3.3V Power Supply control
Q871 SW FET SW14V ON/OFF
Q872 Transistor SW14V control
Q931 Transistor Steering REMOCON control
Q971 Transistor BU_DET control
Q972 Transistor BU_DET control
Q1121 Transistor PRE_OUT_Mute
Q1301 Transistor PWIC control
Q1302 Transistor PWIC control
Q1341 Transistor AV_OUT_Mute
(No.WA022<Rev.001>)12/36
2.2.3 PANEL-A UNIT 2.2.5 BT UNIT
Ref. No. Application / Function Operation / Condition / Compatibility Ref. No. Application / Function Operation / Condition / Compatibility
IC401 Croma gamma T/C Croma gamma T/C Scaller IC301 BLUETOOTH MCU IC BLUETOOTH controller
Scaller IC302 16Mbit FLASH ROM FLASH ROM for BLUETOOTH
IC404 Logic IC APPCLK buffer MCU IC
IC405 Regulator 1.2V Regulator IC IC303 128Mbit SDRAM IC SDRAM for BLUETOOTH
IC406 Logic IC Vsync 1.0V→3.3V convert MCU IC
IC431 128Mbit SDRAM IC SDRAM for Image signal pres- IC304 Fixed Current Limit Hihg side Switch For BLUE-
ervation Power Distribution TOOTH DONGL
Switch
IC441 64Mbit FLASH ROM FLASH ROM for MN103SH23
IC311 EEPROM Memory
IC451 64Mbit FLASH ROM FLASH ROM for MN103SH23
IC331 DAC IC DAC for BLUETOOTH Audio
IC501 Regulator 9.2V Regulator IC
IC332 OP-AMP X 2 LPF for BLUETOOTH Audio
IC511 OP-AMP X 2 VCOM AMP
IC341 OP-AMP X 2 AMP for BLUETOOTH MIC
Q4002 Transistor Vsync control
IC371 Regulator 1.8V Regulator
Q4601 Transistor VIDEO buffer
Q3311 Transistor 5.0V Regulator for DAC
Q5201 Transistor 18V Regulator
Q5301 Transistor -6V Regulator
Q5302 Transistor -6V Regulator
2.2.4 PANEL-B UNIT
Ref. No. Application / Function Operation / Condition / Compatibility
IC611 Regulator 3.3V Regulator IC
IC651 Remote control module Remote control sensor
Q6001 Transistor LCD Constant current circuit
Q6010 Transistor 18V Regulator controller
Q6011 Transistor 18V Regulator controller
Q6201 Transistor LED B Constant current circuit
Q6202 Transistor LED G Constant current circuit
Q6203 Transistor LED R Constant current circuit
(No.WA022<Rev.001>)13/36
SECTION 3
DISASSEMBLY
3.1 Main body (Used model: DDX419)
3.1.1 Removing the Panel unit (See Fig.1 to Fig.4) 3.1.2 Removing the Panel-B unit (See Fig.5)
(1) Remove the 3 screws A attaching the Panel unit. (1) Disconnect the FFC/FPC wires connected to connector
CN603, CN604, CN605, CN605 of the Panel-B unit.
(2) Remove the 4 screws B attaching the Panel-B unit.
CN603 B CN604
A B
Fig.1
B CN606 CN605
Fig.5
3.1.3 Removing the Panel-A unit / Switch unit (See Fig.6)
(1) Disconnect the FPC connected to connector CN501 of the
Panel-A unit.
(2) Remove the four screws C attaching the Panel-A unit.
(3) Remove the volume knob
A (4) Remove the 3 screws D attaching the Switch unit.
Fig.2 C
(2) Remove the 6 hooks a attaching the Panel unit.
a
D
CN501
Fig.6
Fig.3
(3) Disconnect the connector wire connected to connector
CN654 of the Panel-B unit.
CN654
Fig.4
(No.WA022<Rev.001>)14/36
3.1.4 Removing the DVD mechanism (See Fig.7 to 13) (4) Remove the 2 screws J attaching the Top chassis. (See
(1) Remove the 3 screws E and 2 screws F attaching the Heat Fig.10)
sink.
J
Fig.7
(2) Remove the 2 screws G and 2 screws H attaching the Rear Fig.10
heat sink (5) Remove the 1 screw K attaching the Top chassis. (See
Fig.11)
G H
K
Fig.8
(3) Disconnect the FFC wire connected to connector CN105 of
the Main unit. (See Fig.9)
Fig.11
(6) Remove the 4 screws L attaching the Top chassis. (See
Fig.12)
CN105
Fig.9
Fig.12
(No.WA022<Rev.001>)15/36
(7) Remove the 3 screws M attaching the DVD mechanism. (2) Disconnect the FFC wire from Main unit connected to con-
(See Fig.13) nectors CN201 and CN202 of the Sub unit. (See Fig.16)
(3) Disconnect the Car cable connected to connector CN104
of the Main unit. (See Fig.16)
M (4) Disconnect the Car cable connected to connector CN241
of the Sub unit. (See Fig.16)
(5) Remove the 3 screws Q attaching the Sub unit. (Se Fig.16)
CN104
CN201
M CN202
Q
CN241
Q
Fig.13
3.1.5 Removing the BT unit (See Fig.14)
(1) Disconnect the FFC wire connected to connector CN311 of
the BT unit.
(2) Disconnect connector wire connected to connector CN341 Fig.16
of the BT unit. 3.1.7 Removing the Rear panel (See Fig.17, 18)
(3) Remove the 4 screws N attaching the BT unit. (1) Disconnect the connector wire connected to connector
CN101, CN112 of the Main unit. (See Fig.17)
CN101 CN112
CN311 CN341 Fig.17
Fig.14 (2) Remove the 6 screws R and 2 screws S attaching the Rear
panel. (Se Fig.18)
3.1.6 Removing the Sub unit (See Fig.15, 16)
(1) Remove the 1 screw P attaching the Sub unit. (See Fig.15)
P R
S
Fig.18
Fig.15
(No.WA022<Rev.001>)16/36
3.1.8 Removing the Center chassis (See Fig.19) 3.2 DVD mechanism
(1) Remove the 4 screws T attaching the Center chassis. 3.2.1 Removing the Traverse mechanism assembly (See
Fig.1 to 6)
(1) Solder the short land section on the flexible wire of pickup.
(See Fig.1)
Caution:
* Solder the short land section on the flexible wire of pickup
T before disconnecting the flexible wire form the connector
T CN101 on the Front end board.
If the flexible wire is disconnected without attaching the
solder, the pickup may be destroyed by static electricity.
* When attaching the Traverse mechanism assembly, re-
move the solder from the short land section after connection
the flexible wire to the connector CN101 on the Front end
board.
Solder short part
Fig.19
3.1.9 Removing the Main unit (See Fig.20)
(1) Remove the 4 screws U attaching the Main unit.
U U
Fig.1
(2) Voltage supply to TP79 and TP81 approx DC 3.0V until
Clamper is shift to loading complete position. (See Fig.2)
(3) Disconnect the flexible wires from Traverse mechanism assembly
connected to connector CN1 and CN101 of the Front end board.
(See Fig.2)
CN101
Fig.20
CN1
R317
TP79 TP81
TP81
TP67
R312
TP92
WOOFER
R21
CENTER
DGND_7
R357
D-
TP79 Voltage supply

position
Fig.2
(No.WA022<Rev.001>)17/36
(4) Remove the five screws A attaching the Top cover assembly. (7) From the top side, pull up the traverse mechanism and disengage
(See Fig.3) three dumper positions. (See Fig.6)
Dumper
A (same color spring)
Dumper
(Different color spring)
Fig.6
Fig.3 3.2.2 Removing the Front end board (See Fig.7)

(5) From the bottom side, disconnect the connector wire from (1) Remove the Motor wires from loading motor soldered to
Top cover assembly connected to connector CN2 of the TP79 and TP81 of the Front end board.
Front end board. (See Fig.4) (2) Remove the two screws B attaching the Front end board.
TP81
TP79
CN2 B
B
Fig.4
(6) From the bottom side, remove the spring from Traverse
mechanism assembly. (See Fig.5)
Fig.7
Fig.5
(No.WA022<Rev.001>)18/36
3.2.3 Removing the Loading arm assembly (See Fig.8) (2) Remove the two screws C attaching the Gear base assembly.
(1) Remove the Loading arm spring L from Loading arm assembly. (See Fig.10)
(2) Slide to left side and then disengage hook a then hook b.
hook b
Loading arm
assembly
C
hook a
Fig.10
3.2.5 Removing the Loading arm holder. (See Fig.11)
(1) Remove the two screws D attaching the Loading arm holder.
(2) Remove the Loading arm spring R.
Loading arm spring L
D
Loading arm
holder
Fig.8
3.2.4 Removing the Gear base assembly (See Fig.9, 10)
(1) Remove the Loading arm spring L. (See Fig.9)
Loading arm
spring L
Loading arm
spring R
Fig.11
3.2.6 Removing the Loading moor assembly (See Fig.12)
(1) Remove the three screws E attaching the Loading motor
Fig.9 assembly.
Fig.12
(No.WA022<Rev.001>)19/36
3.2.7 Removing the Slide cam assembly (See Fig.13) (2) Remove the A worm gear, M connect gear and M wheel
(1) Slide to backward the Slide cam assembly and the remove gear by sequentially. (See Fig.16)
the Slide cam spring.
(2) Slide to frontward the slide cam assembly, and then take A worm gear
out it.
M connect gear
Slide cam assembly
M wheel gear
Slide cam spring

Fig.13
Fig.16
3.2.8 Removing the Photo board (See Fig.14)
(3) Remove the two screws G attaching the Loading motor.
(1) Pressing the hook c and then slide to backward (slide to the
(Se Fig.17)
arrow side) the Disc plate.
(2) Remove the one screw F attaching the Photo board.
G
hook c
hook c
Fig.17
(4) When attaching the Loading motor, motor wire should arrange
Photo board
to figure. (See Fig.18)
Wire arrangement
F
Fig.14
3.2.9 Removing the Loading motor (See Fig.15 to 18)
(1) Remove the A wheel gear. (See Fig.15)
A Wheel gear Fig.18
3.2.10 Removing the Roller assembly (See Fig.19)
(1) Remove the Slit washer.
(2) Remove the R middle gear.
(3) Remove the R connect gear.
(4) Snap off the part a of the Roller assembly.
(5) Lift up the part b of the Roller assembly, and then release
part c (When release part c, R collar R is easy to come off,
does not lose it).
CAUTION:
When reattach the Roller assembly, Middle gear should keep
direction and Slit washer should be change new part.
Fig.15
(No.WA022<Rev.001>)20/36
R middle gear
Direction
R collar R
R connect gear
Slit washer
part c
part a
part b
Fig.19
3.2.11 Removing the Roller (See Fig.20)
(1) Remove the Slit washer.
(2) Pull out the Roller shaft.
CAUTION:
When reattach the Roller shaft, Slit washer should be change
new part.
slit
keep direction
keep direction
slit
small side
Fig.20
(No.WA022<Rev.001>)21/36
SECTION 4
ADJUSTMENT
4.1 TEST MODE
4.1.1 List of special modes
Mode name Description Key used
Service mode Mode used for service. TEL/AUD + Upper left → Upper right
Production mode Special operation mode for production line. Not used for FNC + RST
service.
SS mode Special service mode entered from the production mode. TEL/AUD + Upper right
Not used for service.
OPENING CUSTOMIZE MODE Mode used by sales and retail. AV + FNC + RST
(and) Setting Rewrite mode Overwrites the start-up screen with DISC/USB.
Forcefully cancel Supports the specifi cation for entering code for forcefully Wireless remote controller (AUD mode)
Security code canceling security using wireless remote controller when 552222777
Security code is unknown (Used mainly by service).
* Can be input from any source or condition.

* Can be input on Security Code input screen.
* No time out is specified.
TUNER span switching Switches TUNER frequency step/span. EJECT + ATT + RST
Retailer mode ON (1) When power ON, always start with DISC source (wheth- MENU + FNC + RST
er or not there is a DISC in the unit).
* In all cases when the power supply is turned ON, includ-
ing initial
power ON, power OFF → ON, ACC OFF → ON, etc, DISC
source come up fi rst.
(2) EJECT prohibited
* Ejected only when [EJECT] key is pressed and held for 10
seconds.
(3) Backup memory and installer memory will not function.
Retailer mode OFF Cancels the above special operation. MENU + RST
(No.WA022<Rev.001>)22/36
4.2 SERVICE MODE Text Description
4.2.1 Switching to service mode DATA3 V**** Display of steering remote control threshold
• While pressing the [TEL] (1) key, within 0.5sec., touch upper version
left corner (2) of the touch panel, and then within 2 sec., touch Displays the version number when threshold
upper right corner (3) of the touch panel. data is written using USB.
For DOP models, display as follows as the
fixed value is retained from the beginning.
(2) (3) HONDA : KC
(1) MAZDA : KF
MITSUBISHI : KG
ISUZU : KJ
NISSAN1 : KS1
NISSAN2 : KS2
TOYOTA : KL
region Region code display
Macrovision **** Macrovision version display
4.2.2 Display specifications BT V*** BT module Firmware version display
DivX **** DvX version display
DISC V**** DISC mecha module version display
Key Action
NEXT Switch from Page1 → 2
PREVIOUS Switch from Page2 → 1
EXIT Exit the service mode and return to the nor-
mal screen.
4.2.2.1 INITIALIZE ALL

• Initialize backup memory, installer memory
• Initialize DISC module (Initialize to normal).
• Initialize Bluetooth module.
• Initialize user-captured wall paper area.
Clear the user-captured area of APP u-com F. ROM and bring
back to the default condition (all black).
• Do not clear touch panel adjustment data/ TUNER adjustment
data/ TUNER span information/ serial number.
<While executing INITIALIZE>
Text Description
S.NO Serial number
Model Model Information
Type Destination information
Span * Display of Span selection status for Tuner
(displayed as K or M)
APP V*.**.** Display of APP u-controller + design data
version
DATA V**** Font data version display
SYS V**** **** Display of system controller version and JVM
number
DISC-Area Area information on DISC mecha module
DATA1 V**** Display of opening data's version
DATA2 V**** Display of wallpaper data's version
(No.WA022<Rev.001>)23/36
<When INITIALIZE completed normally> 4.2.2.3 RUNNING MODE
Below screen is retained and normal screen is not displayed. Refer to the “RUNNING MODE”.
• [BACK] / [EXIT] keys prohibited
• All keys including hard keys and remote controller keys are 4.2.2.4 DVD CHECK MODE
prohibited. When this mode is selected, reset DISC module and restart in
Check Mode.
After restarting in Check Mode, transit to DVD CHECK MODE
screen.
Refer to the “DVD CHECK MODE”.
4.2.2.5 ERROR/DIAG DATA

Refer to the “ERROR READ”.
4.2.2.6 RDS TEST MODE

Valid only with TUNER source.
When this mode is selected, operate TUNER in RDS execution
mode.
In the display specifi cations required in the above fi les, only the
<When INITIALIZE terminated abnormally> 5 parameters, S-Meter, Noise, Multipath, Integrated noise, and
Determine error in each block of SYSTEM/ DISC/ BT. tunnel are supported.
• In case of Bluetooth, Initialize Error is also considered as ab-
normal termination 4.2.2.7 BT MICROPHONE TEST
Discontinue process once NG is detected, and display the corre- The mode for confi rming the normal operation of BT audio circuit
sponding error as follows. by inputting audio from MIC and outputting from the speaker.
• Switch the audio selector to Bluetooth.
NG SYSTEM: Clearing of the unit set EEP (APP management • Send Bluetooth Loopback START command to TCC.
and SYS management) terminated abnormally • Send to TCC the command for setting Mic Gain, set at Gain 2
NG DISC: Clearing of DISC module EEPROM terminated abnor- (fixed).
mally.
NG BT: BT module initialization terminated abnormally. <While executing MICROPHONE TEST>
Retain the above screen until [EXIT] key or [BACK] key is
The below screen is retained until the [EXIT] key is pressed. pressed.
When the [EXIT] key is pressed, normal screen is brought back.
BACK ↓ EXIT
4.2.2.2 TEMPERATURE
Displays DISC module temperature (displays in 3 digits). <MICROPHONE TEST completed>
Acquires data from the module and updates the display every 30 This mode can be cleared only by turning the power OFF.
seconds, as is done in the normal operation mode. • [BACK] / [EXIT] keys prohibited
(No.WA022<Rev.001>)24/36
4.2.2.8 BT DONGLE CHECK MODE 4.2.2.11 SXM CODE CLR
Mode for checking if the Telechips module USB terminal oper- Mode for clearing the Sirius XM parental code
ates electrically normally. Press the KEY to start the clearing process. The screen switches
• Test only after the BT dongle is inserted. to the following view.
Upon moving to this mode, display the following after the BT don-
gle is correctly detected.
<OK display>
After the clearing process is complete, switch to the following

screen.
[BACK] key: Returns to the SS mode or service mode

screen
[EXIT] key: Exits the SS mode or service mode
Display the following if the BT dongle cannot be correctly detect-

ed.
<NG display>
[BACK] key: Returns to the SS mode or service mode

screen
4.2.3 DVD CHECK MODE display specifications

Directly touch the item to select the operation.
NORMAL PLAY: Displays the currently selected item
XXXX XXXX: Displays the data acquired from the mecha module
[BACK] key: Returns to the SS mode or service mode (4 bytes) as it is.
screen
If the inserted BT dongle is inserted while the above NG screen

is displayed, switch to the OK display.
4.2.2.9 FIRM UPDATE MODE

Refer to the “FIRM UPDATE MODE selection screen”.
4.2.2.10 STEERING REMOTE DEVELOPMENT

Refer to the “STEERING REMOTE DEVELOPMENT screen”.
• DVD CHECK MODE is cleared by power OFF (Clear by ACC

OFF/ BATTERY OFF/Detach).
• Immediately after moving to the DVD CHECK MODE, hide the
display of all the above. Display the top 2 lines after an item is
selected.
• 3rd line display: Display Arg 2,3,4,5 (HEX) of the command re-
ceived from the module, in the following format.
X X X X X X X X
Arg2 Arg3 Arg4 Arg5
(No.WA022<Rev.001>)25/36
(1) NORMAL PLAY 4.2.4 RUNNING MODE display specifi cations
Process test item [1] of the check mode specification Directly touch the item to select the operation.
2nd line display: NORMAL PLAY DVD MODE5: Displays the currently selected mode
3rd line display: Available COUNT: Counter display
(2) EF OUT-TRACKING OFF DVD ERROR: Displays the error code for error in the DISC
Process test item [2] of the check mode specification mecha (display as OOOOOO when there is no error)
2nd line display: EF OUT-TRACKING OFF DOOR ERROR: Displays the error code for error in the door
3rd line display: Nil mecha (display as OOOOOO when there is no error)
(3) EF IN-TRACKING OFF
Process test item [3] of the check mode specification
2nd line display: EF IN-TRACKING OFF
3rd line display: Nil
(4) CD-LASER ON
2nd line display: CD-LASER ON
3rd line display: Available
(5) DVD-LASER ON
2nd line display: DVD-LASER ON
(6) DVDx1 JITTER MODE
2nd line display: DVDx1 JITTER MODE *Immediately after moving to the RUNNING MODE, hide the dis-
3rd line display: Available play of all the above. Display the above items after an item is se-
(7) SEARCH & JITTER lected.
Process test item [10] of the check mode specification [BACK] key: Goes back to the service mode *Only valid before
2nd line display: SEARCH & JITTER selecting an item. Not valid after a selection is made.
Mode Cancel Key
(8) MONITOR
• DOOR MODE can be canceled using the EJECT hard key.
• DVD MODE can be canceled using the Power Off hard key.
2nd line display: MONITOR
(1) DOOR MODE
(9) DVDx1 PLAY
Execute Door mecha running mode 1.
(Not valid for models without door mecha.)
2nd line display: DVDx1 PLAY
2th line display: DOOR MODE 1
3th line display: Display the number of runs in 6 digits.
(10) STOP
4th line display: No display
5th line display: Display as "000000" when there is no door
2nd line display: STOP
mecha error, display the door mecha error code when an
error has occurred.
(11) EJECT
(2) DVD MODE 1 to DVD MODE 6
Execute DVD running mode 1 to 6.
2nd line display: EJECT
(Refer to the following DVD mechanism running mode list.)
For models with door mecha, OPEN/CLOSE the door in
(12) LOAD
sync with DISC LOAD/EJECT.
2nd line display: DVD MODE 1-6
2nd line display: LOAD
3rd line display: Display Arg 5,6,7 (BCD) of the Unit request
(running status) received from DISC module in 6 digits.
(13) SLEEP
4th line display: Display Arg 2,3,4 (HEX) of the Unit request
(running status) received from DISC module in 6 digits.
2nd line display: SLEEP
5th line display: Display as "000000" when there is no door
mecha error, display the door mecha error code when an
(14) EEPROM DATA OSD
error has occurred. (No display for models without door
• Send "OSD display request command" (start EEPROM
mecha.)
record data OSD display mode) to the DISC module.
• When a remote control key command (CURSOR UP/
DOWND/LEFT/RIGHT) is received while this item is se-
lected, send CURSOR UP/DOWND/LEFT/RIGHT as it is
to the DISC module.
• After this item is selected, only POWER OFF is valid, and
selection of items [1] to [13] will not be valid.
(As DISC module does not guarantee normal operation
after moving to this mode)
2nd line display: EEPROM DATA OSD
(No.WA022<Rev.001>)26/36
(3) Running mode list 4.2.5 ERROR/DIAG DATA display and CLEAR screen
Mecha- EE-
Operation in 1 cy- Disc Feed
Mode nism PROM
cle error error
error error
1 Loading → Eject → Stop - -
Wait 5 seconds
2 Loading → Eject → Retry - -
Wait 5 seconds
3 Loading → Play Stop Stop Stop -
back → Eject →
Wait 5 seconds
4 Inner circumfer- Stop Stop Stop -
[BACK] key: Goes back to the service mode
ence → Outer cir-
cumference→ Inner
(1) DVD ERROR (DISC module error history)
circumference
By DISC module communication, acquire total error count,
(seeking)
the most recent 3 errors, initial 5 errors, and display them.
5 Loading → EE- Stop Stop Stop Stop (2) MECHA ERROR (door mechanism error history)
PROM read → EE- Read total error count, the most recent 3 errors, initial 5 er-
PROM rors, and display them.
value check → Play (3) DC1 / DC2 (DC offset error history)
back → Eject Read whether or not there is a DC1 error, and DC2 error
→EEPROM read → count, and display them.
EEPROM write → (4) DISC EJECT **** times
Wait 5 seconds By DISC module communication, acquire DISC EJECT
6 Loading → EE- Stop Stop Stop Stop count and display it.
PROM read → EE- (5) [DVD ERROR/DISC EJECT CLR] key
PROM Clears the DVD ERROR history and DISC EJECT count.
value check → Play (Sends to DISC module EEPROM initialization command
back → Eject (also initializes error history).)
→EEPROM read → →Goes back to the SERVICE MODE
EEPROM write → (6) [MECHA ERROR CLR] key
Wait 5 seconds Clears the door mechanism error history.
→Goes back to the SERVICE MODE
• Running mode 1 and 2 tests only loading and ejecting of disc. (7) [DC ERROR CLR] key
• Running mode 4 does not include ejecting. 1 cycle consists of Clears the DC1/2 error history.
accessing outer circumference → accessing inner circumfer- →Goes back to the SERVICE MODE
ence.
• Running mode 3 tests disc loading, ejecting, and play back.
• Running modes 5 and 6 tests and checks disc loading, eject-
ing, play back, EEPROM operation.
• Mechanism error means an error at the time of loading and/or
ejecting.
• Disc error is an error at the time of disc play back.
• Feed error is an error at the time of feed operation.
• EEPROM error is an error at the time of EEPROM operation.
• Stop at the time of error is the mode where the operation stops
immediately after an occurrence of an error without retrying.
• Retry at the time of error is the mode where normal operation
retry is executed after the initial error, and if the error persists,
the operation stops.
(No.WA022<Rev.001>)27/36
4.2.6 FIRM UPDATE MODE selection screen <Display during Update (Image)>
[BACK] key: Goes back to the SERVICE MODE <Update Complete Display (Image)>
(1) [SYSCOM] key

Perform Update when a USB device containing the Update
data is inserted.
• Select a USB source before moving to the service mode.
• Beep sound is output while Update is in progress and
when it is complete, so make sure a speaker is connect-
ed.
<Display during Update (Image)>
(3) [Bluetooth] key

• When a BT dongle is inserted in the Telechips USB ter-
minal or when nothing is inserted →No transition of op-
eration.
• When a USB memory is inserted in the Telechips USB
terminal→Transit to the following screen, send [Play] key
to the address USB, and allow reading of fi les in the USB
memory.
• Output beep sound at regular intervals while Update is in

progress
<Update Complete Display (Image)>
[BACK] key: invalid
• If update information (Update file in the ROOT folder)

command is received, control thereafter follows the
specifications of the module.
*Do not renew display after Update is complete. Alter the • If USB fi le information command is received, it is consid-
interval of beep sound to notify its completion. ered that Update data was not acknowledged and the fol-
*Press the Reset button after Update is complete to return lowing screen is displayed.
to normal operation • Or, the same screen is displayed when update informa-
tion (update error) is received.
(2) [APPCOM] key
Perform Update when a USB device containing the Update
data is inserted.
*Select a USB source before moving to the service mode.
(No.WA022<Rev.001>)28/36
4.3.2 Display, operation setting, and special key operation
in production mode
4.3.2.1 Display in production mode
In order to allow the operator acknowledge that they are in the
production mode, “Production Mode” POPUP is constantly dis-
played.
<Display/Hide Conditions>
Display: GUI control screen, video screen <including Control,
Menu Control>
Hide: Setup screen, MODE screen, Test Mode screen <SS,
Service>
4.3.2.2 Initial setting in production mode
[BACK] key: invalid
Production
Item Normal mode
• The following screen is displayed when update information mode
(update successful) is received. Volume initial value → 15(-34dB)
Volume maximum value 33(-10dB) 35(0dB)
FAN control Always ON ON/OFF *1
DISC module image output NTSC NTSC/PAL
SETUP > BEEP OFF *3 ON *2
SETUP > CAMERA INPUT ON *3 ON *2
SETUP > Audio > Fad/Bal → CENTER
SETUP > Audio > Vol Adjust → 0 (all sources)
SETUP > Audio > HPF Front → Through
SETUP > Audio > HPF Rear → Through
[BACK] key: invalid
SETUP > Audio > LPF → Through
4.2.7 STEERING REMOTE DEVELOPMENT screen SETUP > Audio > SW Level → 0
SETUP > Audio > SW Phase → Normal
SETUP > Audio > Loudness OFF ON
SETUP > Audio > Equlizer → Natural
SETUP > Audio > Speaker Select → Standard
SETUP > Audio > Subwoofer → ON
SETUP > INPUT > AV-INPUT AV-IN AV-IN/iPod
(Depending on
the destination)
AV-OUT DVD OFF
*1: FAN is On at all times even during normal operation.
[BACK] key: Goes back to the SERVICE MODE
*2: Depends on the Back UP memory.
*3: Discards the Back UP memory and performs setting forcibly.
4.3 Production mode
4.3.2.3 Special key operation in production mode only
4.3.1 Key operation when going into production mode
(invalid in normal mode)
Press and hold the [FNC] key (1) and press the [RESET] key (2).
[TEL] key + [Touch panel upper right corner] (Press twice) Tran-
(2) sit to SS mode.
4.3.2.4 Protection when production mode is continued
If the production mode continues for 30 minutes, the unit turns its
power OFF, and power ON is disabled until reset.
(1)
(No.WA022<Rev.001>)29/36
4.3.3 Clearing the production mode Upon exiting the SS mode to return to the normal mode, restore
• Power OFF by the [POWER] key the audio selector to the original source.
• Power OFF by ACC OFF
Text Description
• Power OFF by battery OFF
• Power OFF by detach detection SYS V **** Display of system controller version
Clear the production mode by one of the 4 options above and re- APP V ***** Display of APP micro-controller + design
turn to the normal mode. data version
4.4 SS mode DATA V **** Display of Font data version
4.4.1 Switching to SS mode DISC V **** Display of DISC mecha module's version
Press and hold the [TEL] key (1) and, within 0.5 sec., touch the
upper right corner (2) of the touch panel. DivX **** Display of DvX version
BT V *** Display of BT module's firmware version
Span * Display of Span selection status of Tuner.
(2) Display as K or M. *For areas that do not
(1) support Span selection, display as "-".
Type Area information
Model Model information
DISC-AREA Area information of DISC mecha module
reg. Region code
Ok Display for When APP & DATA CHKSUM is executed,
4.4.2 Display specifications All Items Above check against data in USB, and display OK
or NG. *Not displayed if it is not executed.
*Display NG in red.
TUN : Y or N Display the SmeterLevelOffset adjustment
status of Tuner. Y: adjustment complete, N:
not adjusted. *Display N in red.
MON : Y or N Display status of monitor adjustment by pro-
duction line. Y: adjustment complete, N: not
adjusted. *Display N in red.
TOU : Y or N Display status of touch panel adjustment by
production line. Y: adjustment complete, N:
not adjusted. *Display N in red.
SUM OK ******** Display APP micro-controller program area's
sum and check sum results. Check sum OK
or NG. *Display NG in red.
SUM OK ******** Display APP micro-controller design data ar-
ea's sum and check sum results. Check sum
OK or NG. *Display NG in red.
S.NO Serial number. Not written: ------ Models that
do not support serial numbers: None *Dis-
play "------" in red.
DATA1 V**** Display of opening data's version
DATA2 V**** Display of wallpaper data's version
DATA3 V**** Display of steering remote control threshold
version
Displays the version number when threshold
data is written using USB.
For DOP models, display as follows as the
fixed value is retained from the beginning.
HONDA : KC
MAZDA : KF
MITSUBISHI : KG
ISUZU : KJ
NISSAN1 : KS1
NISSAN2 : KS2
When any of the above SS mode screens is displayed (Page 1/ TOYOTA : KL
3, 2/3, 3/3), set the audio selector to MUTE (equivalent to Stand-
by source).
(No.WA022<Rev.001>)30/36
• Set video selector to the RGB input side. (This is conse-
Key Action
quently set to the mecha side since there is no RGB in-
NEXT Switch from 1→2, switch from Page2→3 put.)
PREVIOUS Switch from Page2→1, switch from Since there is no RGB input in this case, display switches
Page3→2 consequently to the mecha side to display video input
from mecha.
EXIT Exit the SS mode and return to the normal *The operator knows, by seeing the image switched, the
screen set is ready for serial writing.
(2) From hereafter, communication with the jig does not up-
4.4.2.1 INITIALIZE ALL date the display.
Same as in SERVICE MODE. Display on the jig application indicates the status.
4.4.2.2 S/N WRITE & RGB(SXM) TERMINAL CHK (3) When received from the jig “request for ending serial writ-
Mode for writing serial number. ing mode”, follow the process below.
• Set the NAVI communication terminal’s serial setting
In this mode, in order to also check electricity of all terminals of
back to the normal operation setting.
RGB connector, video and audio selectors are fi xed to RGB ter-
• Set POWER_EN terminal to High output.
minal.
• Set the audio selector back to the original setting.
(1) When this mode is selected, carry out the following pro-
• Switch the display to the following GUI display. (Read the
cesses.
serial number written in and display in the following
• Configure the NAVI communication terminal’s serial set-
screen.)
ting to the setting for serial writing.
• Set the video selector to RGB input.
• Set the audio selector to NAVI.
The display is switched to RGB and the image input from
the jig is displayed.
*The operator knows, by seeing the image switched, the
set is ready for serial writing.
(2) From hereafter, communication with the jig does not up-
date the display.
Display on the jig application indicates the status.
(3) When received from the jig “request for ending serial writ-
ing mode”, follow the process below.
• Set the NAVI communication terminal’s serial setting
back to the normal operation setting.
4.4.2.4 MONITOR ADJUSTMENT MODE
• Set the video selector back to the original setting.
Mode for adjusting the image quality on the production line.
• Set the audio selector back to the original setting.
Display the following.
• Switch the display to the following GUI display.
In this case, regardless of the current source, set Video selector
Read the serial number written in and display in the fol-
to AV-IN (external input), and display the external input video in
lowing screen.
the background.
(This is for adjustment by inputting composite signal in a white
image from an external pattern generator.)
Restore the Video selector to the original state when exiting this
adjustment mode.
• As adjustment is performed while pressing the sensor of the
measuring instrument against the center of the monitor, dis-
play the adjustment button and STORE button on the Aright
side of the screen.
4.4.2.3 S/N WRITE & RGB(SXM) TERMINAL CHK

Mode for writing serial number.
As this mode is also used for performing electrical check of all
terminals of Sxi connectors, fix the audio selector to the Sxi ter-
minal side.
*General Sxi operation is not guaranteed after this mode is se-
lected.
(1) When this mode is selected, carry out the following pro-
cesses. Adjustment items are only 3 items, Drive R/G/B only, and press-
• Set Sxi serial terminal setting to that for writing Serial No. ing the STORE button writes the adjustment value into F. ROM.
• Set POWER_EN terminal to Low output.
• Set audio selector to the Sxi side.
(No.WA022<Rev.001>)31/36
4.4.2.5 BT MICROPHONE TEST
Same as in SERVICE MODE.
4.4.2.6 BT DONGLE CHECK MODE

Same as in SERVICE MODE.
4.4.2.7 S-METER LEVEL CALIBRATION

Refer to the “SMETER LEVEL CALIBRATION”.
4.4.2.8 TOUCH PANEL CALIBRATION

Refer to the “TOUCH PANEL CALIBRATION (Touch adjust-
ment, offset (GRAPHIC) VGA)”
4.4.2.9 VER/CHECK SUM

Performs check on the version number of each micro-controller/
data and the SUM value of the APP program area/DATA area.
Select this item after inserting a USB device containing the check
data for all of the above.
(1) Version Number Check
Determines whether the version number retained within the
set is consistent with that read from the USB device.
If the version number is consistent, display "OK" to the left
of the version display. If it is not consistent, display "NG".
Perform version check on all items on SS Mode Page2/3
marked with "OK".
OK: V1.00.00 Consistent (4) When USB device is not inserted
NG: V1.00.00 Not consistent Display the following if a USB device is not detected when
V1.00.00 Not checked this item is selected.
(2) SUM Value Check
Calculate the SUM value for each of the APP program area
and DATA area, and determine whether they are consis-
tent with the SUM value read from the USB device.
If the value is consistent, display OK + SUM value. If it is
not consistent, display NG + SUM value.
*Exclude DATA area for DOP (DATA1, DATA2, DATA3)
from SUM calculation.
<CHKSUM OK>
ASUM OK ********(SUM value 4 bytes) ← Upper line shows
CHKSUM result of program area
DSUM OK ********(SUM value 4 bytes) ← Lower line shows
CHKSUM result of DATA area 4.4.2.10 STEERING REMOTE CHK MODE
Performs voltage check on the Steering Remote terminal.
<CHKSUM NG (NG only for Data Area)>
ASUM OK ********(SUM value 4 bytes) ← Upper line shows 4.4.2.11 Sirius XM CHECK MODE
CHKSUM result of program area Mode for checking the Sirius XM terminal.
DSUM NG ********(SUM value 4 bytes) ← Lower line
shows CHKSUM result of DATA area 4.4.2.12 CUSTOMIZE MODE
Mode for customizing for DOP at the production line.
<Not Calculated> Performs Update when a USB device containing data for rewrit-
ASUM ing is inserted.
DSUM Data subject to rewriting is as follows.
(3) TOTAL Assessment • Opening image
Display TOTAL as OK only if all version checks and SUM • Wallpaper image
values are OK, and all monitor adjustment, touch panel ad-
justment, and S meter adjustment are complete. 4.4.2.13 STEERING REMOTE CUSTOMIZE MODE
Display as NG if any one of these is NG. Mode for customizing for DOP at the production line.
Performs Update when a USB device containing data for rewrit-
ing is inserted.
Data subject to rewriting is as follows.
• Steering remote control threshold (by manufacturer)
4.5 SMETER LEVEL CALIBRATION
Transit to the following screen display and calibrate S.METER
level offset.
(No.WA022<Rev.001>)32/36
There are 2 types of modes: AUTO calibration mode and MAN- • Modulation : Off
UAL calibration mode. If SMETER LEVEL CALIBRATION item is • Output: 35dBµV
selected, the AUTO calibration mode is always selected. With the above setting made, connect SSG to the set, and
For the LEVEL OFFSET value, display the previous adjustment start calibration by the [AUTO START] key.
value after entering this item. *RDS SSG does not need to be connected.
• When ending automatic level offset adjustment, send "TEST If NG, slightly change output (dBµV) and start calibration
MODE Level offset mode abort" via the local transmission again.
TUNER CONROL KEY. (3) UP
S.METER: Displays S meter's instantaneous value at the "00" Displayed only if MANUAL calibration is selected in 1.
position (display in 2 HEX digits) Press this key to manually calibrate level offset value.
LEVEL OFFSET: Displays LEVEL OFFSET value at the "00" po- (4) DOWN
sition (display in 2 HEX digits) Displayed only if MANUAL calibration is selected in 1.
Freq.: Current frequency display Press this key to manually calibrate level offset value.
STANDBY: Displays the adjustment status. (Not displayed dur- (5) SAVE
ing MANUAL.) Displayed only if MANUAL calibration is selected in 1.
On standby: "STANDBY" Save the level offset value calibrated in 3 and 4
Adjusting: "IN PROGRESS..." 4.6 TOUCH PANEL CALIBRATION (Touch adjustment, off-
Ended successfully: "OK" set (GRAPHIC) VGA)
Aborted: "NG"
Defi ne the coordinates used in this sheet.
4.6.1 Touch adjustment (TOUCH ADJUST)

The 4 points on the screen, P1 (X1,Y1), P2 (X2,Y2), P3 (X3,Y3),
P4 (X4,Y4) are the coordinate values (voltage values) actually
read by touch adjustment.
The points shown on the adjustment screen have 2 dots, one for
X and one for Y coordinate.
In normal mode touch adjustment, P2 and P4 coordinates are ac-
quired. In test mode touch adjustment, coordinates of P1 to P4
are acquired (The reference point is lower left, whose coordinate
value shall be (1,1).
4.6.2 Touch panel ADJUST specifi cations
u-com default condition
[BACK] key: Exits this mode and returns to the SS MODE In-factory adjustment
screen Test mode
[EXIT] key: Exits this mode and returns to the normal screen (SS Re-
adjustment
mode is also canceled)
(1) AUTO/MANUAL Factory default condition
Select whether to calibrate level offset by AUTO or MANU-
AL.
If the 1st line item is AUTO, “(AUTO)” is displayed after User adjustment Touch panel reset
User
“S.METER LEVEL OFFSET CALIBRATION”, and if the 1st Re- Re-
line item is MANUAL, then “(MANUAL)” is displayed after adjustment adjustment
“S.METER LEVEL OFFSET CALIBRATION”.
User-adjusted condition
(2) AUTO START
Displayed only if AUTO calibration is selected in 1. Note 1: In normal mode touch adjustment, “RESET” on the touch
Press this key to start level offset auto-calibration. adjustment screen resumes the data touchadjusted in the test
[Additional Information] mode.
SSG setting when AUTO calibrating
• Frequency: FM 98.3MHz
(No.WA022<Rev.001>)33/36
Note2: Factory default adjustment should be cleared, and re-ad-
justment is enabled.
Note3: Users cannot RESET the factory default condition.
4.7 OPENNING CUSTOMIZE screen
(1) [Openning Customize] key

Transits to the following screen, and displays a prompt for
Disc or USB memory insertion.
• Independent of the source, and insertion of DISC or USB
from any source can be accepted.
In other words, switch the input source of DISC mecha to
USB when USB is inserted.
• After entering this screen, reset is required to go back to
normal operation.
(No.WA022<Rev.001>)34/36
SECTION 5
TROUBLESHOOTING
This service manual does not describe TROUBLESHOOTING.
(No.WA022<Rev.001>)35/36
JVC KENWOOD Corporation
Car Electronics Business Group 2967-3, Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525, Japan
(No.WA022<Rev.001>)
Printed in Japan
VSE
PARTS LIST
DDX3021 DDX3049 DDX3051
DDX319 DDX4021BT DDX4031
DDX4031BT DDX4031BTM DDX4031M
DDX4049BT DDX4051BT DDX419
(No.WA022<Rev.001>)1/31
(No.WA022<Rev.001>)2/31
EXPLODED VIEW (UNIT)
Block No.200A
EXCEPT
702
4031,4031M,4031BT,4031BTM
207
J
222 J
208
720
719
716
207
VME1 ONLY USED

208
319,419 ONLY USED
4031,4031M,4031BT,4031BTM
F
H E
F D x2
H
E
F 714
E
E F E
F
FC4 B
A x2
715
F x2 F EXCEPT
724
319,419
725
MAIN
713
F901
210
G x2 B x2
F
F x2
G x2
F ONLY USED
BT MODEL
F
ONLY USED
BT MODEL
N
FC3
N WH1 232
N x2 763
761
721 209
F
G
F
FC2
F
G
727
G
G
762
G FC1
G
F
G x2
703
701
717
717
WH2
Parts with the exploded numbers larger than 700 are not supplied.
No.WA022 created date:2012-02-15
(No.WA022<Rev.001>)3/31
MODEL MARK MODEL MARK MODEL MARK MODEL MARK
DDX3021E E2 DDX3049R R2 DDX3051Q Q2 DDX319K K1
DDX4021BTE E1 DDX4031BTM M1 DDX4031BTMM M2 DDX4031BTX X1
DDX4031M M3 DDX4031MM M4 DDX4031X X2 DDX4049BTR R1
DDX4051BTQ Q1 DDX419K K0
Safe Symbol No. Parts No. Parts Name Description QTY Local
EXPLODED VIEW (UNIT) <200A>

FC1 E39-1289-08 FFC WIRE 14pin 5cm 1
FC2 E39-1228-08 FFC WIRE 12pin 7cm 1 E1,M1,M2,X1,R1,Q1,K0
VME1 D40-2248-08 DVD MECHA MODULE FMU-XS2-21D 1
VME1 or D40-2245-08 DVD MECHA MODULE FMU-XS2-41D 1
WH1 E39-1231-08 E-SI C WIRE C-C 1 E1,M1,M2,X1,R1,Q1,K0
WH2 E39-1232-08 E-HARNESS ASSY 1
A N09-6837-08 SPECIAL SCREW 2
B N09-6871-08 TAP SCREW M3 x 10mm 3
D N09-6873-08 TAP SCREW M2.6 x 10mm 2
E N09-6774-08 SPECIAL SCREW 5
F N09-6890-08 SPECIAL SCREW 17
G N09-6876-08 SPECIAL SCREW 12
H N09-6764-08 SPECIAL SCREW 3
J N09-6878-08 SPECIAL SCREW 2
N N09-6876-08 SPECIAL SCREW 4
207 F09-3112-08 PIN CAP 2
208 E30-8281-08 CAR CABLE AV 1
E2,R2,Q2,K1,E1,R1,Q1,K
0
208 E30-8282-08 CAR CABLE AV 1 M1,M2,X1,M3,M4,X2
209 E30-8231-08 CAR CABLE USB 1 E1,M1,M2,X1,R1,Q1,K0

210 E30-8283-08 CAR CABLE NAVI 1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
222 F09-3088-08 COOLING FAN 1
232 W02-5567-08 RF MODULE BT 1 E1,M1,M2,X1,R1,Q1,K0
(No.WA022<Rev.001>)4/31
EXPLODED VIEW (PANEL)
Block No.200B
RC1 205 230

206 x2
SIZE AAA BATTERY
(NOT SUPPLIED)
257
256
DC1 DC2
211 212 213
FC6
K N
M N
258 N
765
N
FC5 743
L
765
L x2 258
L
L
741
745
C
K L
C
764
244
736
738
PA1 752
737
751
LCD1
749
735
750 734 254

746
253
747
240
239
(No.WA022<Rev.001>)5/31
EXPLODED VIEW (PANEL) <200B>

DC1 E30-8232-08 DC CORD 1
R2,K1,M1,M2,X1,M3,M4,
X2,R1,K0
DC2 E30-8233-08 DC CORD 1 E2,Q2,E1,Q1
LCD1 B38-1237-08 LCD MODULE 1
PA1 A64-5383-08 FRONT PANEL ASSY 1 E2
PA1 A64-5382-08 FRONT PANEL ASSY 1 R2
PA1 A64-5384-08 FRONT PANEL ASSY 1 Q2
PA1 A64-5381-08 FRONT PANEL ASSY 1 K1
PA1 A64-5388-08 FRONT PANEL ASSY 1 E1
PA1 A64-5390-08 FRONT PANEL ASSY 1 M1,M2,X1,M4
PA1 A64-5385-08 FRONT PANEL ASSY 1 M3,M4,X2
PA1 A64-5387-08 FRONT PANEL ASSY 1 R1
PA1 A64-5389-08 FRONT PANEL ASSY 1 Q1
PA1 A64-5386-08 FRONT PANEL ASSY 1 K0
RC1 A70-2083-15 REMOCON UNIT 1 R2,M1,M2,M3,M4,R1
C N86-2004-48 TAP SCREW M2 x 4mm 3
K N09-5625-08 SCREW 2
L N09-6889-08 SPECIAL SCREW 6
M N09-6901-08 SPECIAL SCREW 1
N N09-6876-08 SPECIAL SCREW 4

205 W01-2009-08 MICROPHONE 1 E1,M1,M2,X1,R1,Q1,K0
206 D10-7012-04 LEVER 2
E2,R2,Q2,K1,E1,R1,Q1,K
0
211 B07-3263-02 ESCUTCHEON(2DIN) 1
E2,R2,Q2,K1,E1,X1,X2,R
1,Q1,K0
212 B07-3363-02 ESCUTCHEON(UNIV) 1 X1,X2
213 J22-0657-03 SLEEVE ASSY 1
E2,R2,Q2,K1,E1,R1,Q1,K
0
230 N99-1822-05 SCREW SET 1
R2,K1,M1,M2,X1,M3,M4,
X2,R1,K0
239 B43-1524-04 BADGE 1
240 B09-1012-08 CAP(USB) 1
E2,Q2,E1,M1,M2,X1,M3,
M4,X2,Q1
240 B09-1011-08 CAP(USB) 1 R2,K1,R1,K0
244 G11-3840-08 SPACER 1
253 K28-0503-08 VOL.KNOB ASSY 1
254 S79-0884-08 TOUCH PANEL 1
256 E30-8234-08 CAR CABLE PRK 1
257 W01-2004-15 CAR CABLE ST REMO 1 M1,M2,X1,M3,M4,X2
258 F09-3122-08 SPACER 4
- B64-4979-08 INST BOOK ENG 1 E2,Q2,E1,Q1
- B64-4980-08 INST BOOK FRE 1 E2,E1
- B64-4981-08 INST BOOK GER 1 E2,E1
- B64-4982-08 INST BOOK DUT 1 E2,E1
- B64-4983-08 INST BOOK ITA 1 E2,E1

- B64-4984-08 INST BOOK SPA 1 E2,E1
- B64-4985-08 INST BOOK POR 1 E2,E1
- B64-4973-08 INST BOOK ENG 1 R2,K1,R1,K0
- B64-4975-08 INST BOOK SPA 1 R2,K1,R1,K0
- B64-4986-08 INST BOOK POR 1 R2,R1
- B64-4987-08 INST BOOK RUS 1 Q2,Q1
- B64-4988-08 INST BOOK UKR 1 Q2,Q1
- B64-4974-08 INST BOOK FRE 1 K1,K0
- B64-4976-08 INST BOOK ENG 1 M1,M2,X1,M3,M4,X2
- B64-4977-08 INST BOOK CHI-S 1 M1,M3
- B64-4978-08 INST BOOK ARA 1 M2,M4
- H54-5211-08 CARTON 1 E2
- H54-5210-08 CARTON 1 R2
- H54-5212-08 CARTON 1 Q2
- H54-5209-08 CARTON 1 K1
- H54-5218-08 CARTON 1 E1
- H54-5220-08 CARTON 1 M1
- H54-5221-08 CARTON 1 M2
- H54-5222-08 CARTON 1 X1
- H54-5213-08 CARTON 1 M3
- H54-5214-08 CARTON 1 M4
- H54-5215-08 CARTON 1 X2
- H54-5217-08 CARTON 1 R1
- H54-5219-08 CARTON 1 Q1
- H54-5216-08 CARTON 1 K0
(No.WA022<Rev.001>)6/31
EXPLODED VIEW (DVD:D40-2248-08/FMU-XS2-21D)
Block No.150A
D40-2248-08 (FMU-XS2-21D)
Grease
W01-1737-08 H x2
W01-1738-08 H
H x2
W01-1739-08
W01-1740-08
30
W01-1741-08
W01-1742-08
u
a G
31
855(2/2)
WH1
32
Back view 29
p 51
50
28
F 26
9 k
9
54 10
F
54 54
25 8
24 7
t 23 8
Back view p
21
19 20 D 12
1
17
D a u
E k
11.4mm 0.1mm
E
18 11
13 VM1
C
C
22
48
s
B 5
41
47
36 2
45 K
L
4
J 38 52
t
J
36
44 37
A
K 42 CN2
35
z
A
855(1/2)
43
(No.WA022<Rev.001>)7/31
EXPLODED VIEW (DVD:D40-2248-08/FMU-XS2-21D) <150A>

VM1 T42-1376-08 LOADING MOTOR 1
WH1 E39-1298-08 E-FL/RB WIRE 1
A N09-6778-08 MINI SCREW 2
B N09-6779-08 SPECIAL SCREW 1
C N09-6778-08 MINI SCREW 2
D N09-6780-08 MINI TAP SCREW 2
E N09-6781-08 SCREW M1.4 x 2.5mm 2
F N09-6778-08 MINI SCREW 2
H N09-6778-08 MINI SCREW 5
J N29-0544-08 WASHER 2
K N29-0542-08 SLIT WASHER 2
L N29-0543-08 SLIT WASHER 3.5mm/1.7mm x 0.25mm 1
1 A10-5568-08 FRAME UNIT 1
2 J22-0881-08 STOPPER 1
4 G01-4747-08 L A SPRING(R) 2 1
5 G01-4711-08 L ARM HOLDER 1
7 J02-1216-08 INSULATOR 1
9 G01-4712-08 DAMPER SPRING B 2
10 G01-4713-08 DAMPER SPRING A 1

11 G01-4714-08 FLOATING SPRING 1
12 G01-4715-08 LOCK SLIDER SPR 1
13 J22-0882-08 MOTOR HOLDER 1
17 G02-1598-08 MOTOR TH SPRING 1
18 D13-3115-08 MOTOR WORM GEAR 1
19 D13-2500-08 M WHEEL GEAR 1
20 D13-3001-08 M CONNECT GEAR 1
21 D13-3002-08 A WORM GEAR 1
22 D13-3003-08 A WHEEL GEAR 1
23 D13-3004-08 ACT GEAR 1
24 D13-3005-08 A CONNECT GAER 1
25 D13-3006-08 LOAD GAER 1
26 J22-0883-08 GEAR BASE 1
28 D10-7065-08 SLIDE CAM ASSY 1
29 G01-4716-08 S.CAM SPRING 1
30 A10-5515-08 TOP COVER 1
31 J30-1096-08 SPACER 1
32 J22-0909-08 DISC PLATE 2 1
35 D10-7096-08 LOADING A AS 2 1
36 D14-1035-08 ROLLER 2
37 D21-2534-08 ROLLER SHAFT 2 1
38 J22-0885-08 SHAFT GUIDE 1
41 J31-1082-08 ROLLER COLLAR L 1
42 J31-1087-08 R. COLLAR R2 1
43 D10-7097-08 L ARM ROD 1
44 D13-3007-08 CONNECT GEAR 1
45 D13-3008-08 MIDDLE GEAR 1
47 D13-3009-08 ROLLER GAER 1
48 G01-4748-08 L A SPRING(L) 2 1
50 D40-2239-08 TRA MECHA UNIT CM-FMUXM1D 1
51 G01-4718-08 CLAMPER SPRING 1
52 J30-1099-08 SPACER(P) 1
54 J02-1215-08 INSULATOR CAP 3
(No.WA022<Rev.001>)8/31
EXPLODED VIEW (DVD:D40-2245-08/FMU-XS2-41D)
Block No.150B
D40-2245-08 (FMU-XS2-41D)
Grease
W01-1737-08 H x2
W01-1738-08 H
H x2
W01-1739-08
W01-1740-08
30
W01-1741-08
W01-1742-08
u
a G
31
855(2/2)
WH1
32
Back view 29
p 51
50
28
F 26
9 k
9
54 10
F
54 54
25 8
24 7
t 23 8
Back view p
21
19 20 D 12
1
17
D a u
E k
11.4mm 0.1mm
E
18 11
13 VM1
C
C
22
48
s
B 5
41
47 36
45 2
K
L
4
J 38 52
t
J
36
44 37
A
K 42 CN2
35
z
A
855(1/2)
43
(No.WA022<Rev.001>)9/31
EXPLODED VIEW (DVD:D40-2245-08/FMU-XS2-41D) <150B>

VM1 T42-1376-08 LOADING MOTOR 1
WH1 E39-1099-08 E-SI C WIRE C-F 1
A N09-6778-08 MINI SCREW 2
B N09-6779-08 SPECIAL SCREW 1
C N09-6778-08 MINI SCREW 2
D N09-6780-08 MINI TAP SCREW 2
E N09-6781-08 SCREW M1.4 x 2.5mm 2
F N09-6778-08 MINI SCREW 2
H N09-6778-08 MINI SCREW 5
J N29-0544-08 WASHER 2
K N29-0542-08 SLIT WASHER 2
L N29-0543-08 SLIT WASHER 3.5mm/1.7mm x 0.25mm 1
1 A10-5568-08 FRAME UNIT 1
2 J22-0881-08 STOPPER 1
4 G01-4747-08 L A SPRING(R) 2 1
5 G01-4711-08 L ARM HOLDER 1
9 G01-4712-08 DAMPER SPRING B 2
10 G01-4713-08 DAMPER SPRING A 1

11 G01-4714-08 FLOATING SPRING 1
12 G01-4715-08 LOCK SLIDER SPR 1
13 J22-0882-08 MOTOR HOLDER 1
17 G02-1598-08 MOTOR TH SPRING 1
18 D13-3115-08 MOTOR WORM GEAR 1
19 D13-2500-08 M WHEEL GEAR 1
20 D13-3001-08 M CONNECT GEAR 1
21 D13-3002-08 A WORM GEAR 1
22 D13-3003-08 A WHEEL GEAR 1
23 D13-3004-08 ACT GEAR 1
24 D13-3005-08 A CONNECT GAER 1
25 D13-3006-08 LOAD GAER 1
26 J22-0883-08 GEAR BASE 1
28 D10-7065-08 SLIDE CAM ASSY 1
29 G01-4716-08 S.CAM SPRING 1
30 A10-5515-08 TOP COVER 1
31 J30-1096-08 SPACER 1
32 J22-0909-08 DISC PLATE 2 1
35 D10-7096-08 LOADING A AS 2 1
36 D14-1035-08 ROLLER 2
37 D21-2534-08 ROLLER SHAFT 2 1
38 J22-0885-08 SHAFT GUIDE 1
41 J31-1082-08 ROLLER COLLAR L 1
42 J31-1087-08 R. COLLAR R2 1
43 D10-7097-08 L ARM ROD 1
44 D13-3007-08 CONNECT GEAR 1
45 D13-3008-08 MIDDLE GEAR 1
47 D13-3009-08 ROLLER GAER 1
48 G01-4748-08 L A SPRING(L) 2 1
50 D40-2239-08 TRA MECHA UNIT CM-FMUXM1D 1
51 G01-4718-08 CLAMPER SPRING 1
52 J30-1099-08 SPACER(P) 1
54 J02-1215-08 INSULATOR CAP 3
MAIN UNIT-2 (LVA11038-xxA) <ER>
IC11 TEF6614TV1S3-X IC 1
IC101 TB2926CHQ IC 1
IC141 E-TDA7415CB IC 1
IC152 74AHC1G08GW IC 1
IC153 74AHCT1G08GW IC(DIGITAL) 1
IC181 NJM2794RB2ZB IC 1
IC191 NJM4565E-X IC 1
IC261 NJM2584AM-X IC 1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
IC701 JVM551D IC(MCU) 1
IC721 R1EX24016ASAAX IC 1
IC731 XC6120N242NG-X IC 1
IC751 74AHCT1G08GW IC(DIGITAL) 1
IC801 LV5680P IC 1
IC802 BD9673EFJ IC 1
IC803 BA9743AFV-X IC 1
IC821 XC6213B332N-G IC 1
IC831 BD9673EFJ IC 1
IC851 NJM2835DL1-15X IC 1
IC931 RT3J33M-1 MOS FET ARRAY 1 M1,M2,X1,M3,M4,X2
Q717 DRA9143Z DIGI TRANSISTOR 1
Q731 DRA9114E DIGI TRANSISTOR 1

Q791 2SA812A/5-6/-X TRANSISTOR 1
Q801 DRC9144E DIGI TRANSISTOR 1
Q871 MTM98140-X TRANSISTOR 1
(No.WA022<Rev.001>)10/31
Q971 DSC5001/R/ TRANSISTOR 1
Q1121 DMC20402-W PAIR TRANSISTOR 1

Q1401 INC2002AC1-X TRANSISTOR 1
Q1505 DRC9143Z DIGI TRANSISTOR 1
Q1541 DRA9114E DIGI TRANSISTOR 1 K1,K0
Q1542 DRC9114Y DIGI TRANSISTOR 1 K1,K0
Q1943 DRA9114Y DIGI TRANSISTOR 1
Q1951 RT1N141U-X DIGI TRANSISTOR 1
Q8101 TPC6110-X MOS FET 1
Q8102 2SC1623A/5-6/- TRANSISTOR 1

Q8201 RTQ035N03-W MOS FET 1
D821 CRS03 SB DIODE 1
D871 RKZ18B2KG-X Z DIODE 1
D901 1N5402-BPC04 SI DIODE 1
D902 GS1J-LTP-X DIODE 1
D931 RKZ18B2KG-X Z DIODE 1 M1,M2,X1,M3,M4,X2
D932 RKZ18B2KG-X Z DIODE 1 M1,M2,X1,M3,M4,X2
D935 RKS801KF SI DIODE 1 M1,M2,X1,M3,M4,X2
D936 RKS801KF SI DIODE 1 M1,M2,X1,M3,M4,X2
D971 RKZ6.8B2KG-X Z DIODE 1
D972 RKZ6.8B2KG-X Z DIODE 1
D1121 MC2836-X DIODE 1
D1303 RKS801KF SI DIODE 1

D1372 RKZ5.6KG(B2) Z DIODE 1
D1921 MBRX130-TP-X SB DIODE 1
D1922 MBRX130-TP-X SB DIODE 1

D8001 RB051L-40-X SB DIODE 1
D8203 KDR720E-X SB DIODE 1
C1 CK73HB1H471K C CAPACITOR 470pF 50V K 1
C8 CC73HCH1H270J C CAPACITOR 27pF 50V J 1
C9 CK73GB1C224K C CAPACITOR 0.22uF 16V K 1
C10 CK73HB1E103K C CAPACITOR 0.01uF 16V K 1
(No.WA022<Rev.001>)11/31
C13 CK73HB1A104K C CAPACITOR 0.1uF 10V K 1

C17 C90-6946-08 E CAPACITOR 100uF 16V M 1
C19 CK73GB1A105K C CAPACITOR 1uF 16V K 1
C20 CC73HCH1H060D C CAPACITOR 6pF 50V J 1
C46 CC73HCH1H020C C CAPACITOR 2pF 50V J 1
C50 CK73GB1H103K C CAPACITOR 0.01uF 50V K 1
C260 CK73FB0J106K C CAPACITOR 10uF 6.3V K 1
C262 CK73GB1C105K C CAPACITOR 1uF 16V K 1

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
R2,K1,M1,M2,X1,M3,M4,
X2,R1,K0
C809 CD04BN1C221M E CAPACITOR 220uF 16V M 1
C810 CK73GB1H102K C CAPACITOR 1000pF 50V K 1

C901 C90-6783-05 E CAPACITOR 3900uF 1
C902 C90-6895-08 E CAPACITOR 2.2uF 50V M 1
C931 CK73HB1E103K C CAPACITOR 0.01uF 16V K 1 M1,M2,X1,M3,M4,X2
C932 CK73HB1E103K C CAPACITOR 0.01uF 16V K 1 M1,M2,X1,M3,M4,X2

C1121 CC73GCH1H101J C CAPACITOR 100pF 50V J 1
C1142 CK73FB0J475K C CAPACITOR 4.7uF 6.3V K 1
C1158 CK73GB1A105K C CAPACITOR 1uF 16V K 1 K1,K0
C1163 CK73GB1A105K C CAPACITOR 1uF 16V K 1 E1,M1,M2,X1,R1,Q1,K0
(No.WA022<Rev.001>)12/31

C1258 CK73GB1A105K C CAPACITOR 1uF 16V K 1 K1,K0

C1353 CK73GB1H104K C CAPACITOR 0.1uF 50V K 1 K1,K0

C1358 CK73FB1C106K C CAPACITOR 10uF 16V K 1 K1,K0
C1370 CK73FB1C106K C CAPACITOR 10uF 16V K 1
C1374 CK73GB1A474K C CAPACITOR 0.47uF 10V K 1


(No.WA022<Rev.001>)13/31
C8003 CD04AS1E470M E CAPACITOR 47uF 25V M 1
C8004 CK73EB1E106K C CAPACITOR 10uF 25V 1
C8005 C93-1512-08 C CAPACITOR 0.1uF 16V K 1
C8033 CD04AS1E470M E CAPACITOR 47uF 25V M 1

C8039 C90-6943-08 E CAPACITOR 330uF 6.3V M 1
C8205 C93-1599-08 C CAPACITOR 390pF 50V K 1

C8501 CK73FB1E334K C CAPACITOR 0.33uF 25V K 1
R14 RK73HB1J472J MG RESISTOR 4.7kΩ 1/16W J 1
R16 RK73HB1J684J MG RESISTOR 680kΩ 1/16W J 1
R19 RK73HB1J101J MG RESISTOR 100Ω 1/16W J 1
R21 RK73EB2E220J MG RESISTOR 22Ω 1/8W J 1
R262 RK73HH1J151D MG RESISTOR 150Ω 1/16W D 1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
R267 RK73HB1J470J MG RESISTOR 47Ω 1/16W J 1 K1,K0

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
R702 RK73HB1J332J MG RESISTOR 3.3kΩ 1/16W J 1 E2,E1
R702 RK73HB1J152J MG RESISTOR 1.5kΩ 1/16W J 1 R2,R1
R702 R92-5562-08 MG RESISTOR 6.2kΩ 1/16W J 1 Q2,Q1
R702 RK73HB1J123J MG RESISTOR 12kΩ 1/16W J 1 K1,K0
R702 RK73HB1J912J MG RESISTOR 9.1kΩ 1/16W J 1 M1,M3
R702 RK73HB1J153J MG RESISTOR 15kΩ 1/16W J 1 M2,M4
R702 RK73HB1J243J MG RESISTOR 24kΩ 1/16W J 1 X1,X2
R712 RK73GB2A123J MG RESISTOR 12kΩ 1/16W J 1
R715 RK73HB1J106J MG RESISTOR 10MΩ 1/16W J 1
R723 RK73HB1J123J MG RESISTOR 12kΩ 1/16W J 1 M1,M2,X1,M3,M4,X2

E2,R2,Q2,K1,E1,R1,Q1,K
0
(No.WA022<Rev.001>)14/31
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
R752 RK73HB1J473J MG RESISTOR 47kΩ 1/16W J 1 E1,M1,M2,X1,R1,Q1,K0
R753 RK73HB1J473J MG RESISTOR 47kΩ 1/16W J 1 E2,R2,Q2,K1,M3,M4,X2

R801 RK73GH2A103D MG RESISTOR 10kΩ 1/16W D 1
R803 RK73GH2A562D MG RESISTOR 5.6kΩ 1/16W D 1
R806 RK73HH1J472D MG RESISTOR 4.7kΩ 1/16W D 1
R807 RK73HH1J273D MG RESISTOR 27kΩ 1/16W D 1
R814 RK73FB2B000J MG RESISTOR 0Ω 1/10W J 1 E2,Q2,E1,Q1
R815 RK73FB2B000J MG RESISTOR 0Ω 1/10W J 1
R2,K1,M1,M2,X1,M3,M4,
X2,R1,K0

R931 RK73FB2B470J MG RESISTOR 47Ω 1/10W J 1 M1,M2,X1,M3,M4,X2
R932 RK73FB2B470J MG RESISTOR 47Ω 1/10W J 1 M1,M2,X1,M3,M4,X2
R933 RK73HH1J472D MG RESISTOR 4.7kΩ 1/16W D 1 M1,M2,X1,M3,M4,X2
R934 RK73HH1J472D MG RESISTOR 4.7kΩ 1/16W D 1 M1,M2,X1,M3,M4,X2
R935 R92-5603-08 MG RESISTOR 240Ω 1/10W D 1 M1,M2,X1,M3,M4,X2
R941 RK73HB1J152J MG RESISTOR 1.5kΩ 1/16W J 1 M1,M2,X1,M3,M4,X2
R942 RK73HB1J152J MG RESISTOR 1.5kΩ 1/16W J 1 M1,M2,X1,M3,M4,X2
R943 RK73HB1J681J MG RESISTOR 680Ω 1/16W J 1 M1,M2,X1,M3,M4,X2
R944 RK73HB1J681J MG RESISTOR 680Ω 1/16W J 1 M1,M2,X1,M3,M4,X2

R971 RK73FB2B683J MG RESISTOR 68kΩ 1/10W J 1
R972 RK73FB2B473J MG RESISTOR 47kΩ 1/10W J 1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1

(No.WA022<Rev.001>)15/31
R1151 RK73GB2A222J MG RESISTOR 2.2kΩ 1/16W J 1
R1154 RK73FB2B100J MG RESISTOR 10Ω 1/10W J 1 K1,K0

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
R1352 RK73FB2B4R7J MG RESISTOR 4.7Ω 1/10W J 1 K1,K0
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1

(No.WA022<Rev.001>)16/31
R1382 RK73FB2B132J MG RESISTOR 1.3kΩ 1/10W J 1

R1912 RK73EB2E332J MG RESISTOR 3.3kΩ 1/8W J 1



R8008 R92-5251-08 MG RESISTOR 24kΩ 1/16W D 1
(No.WA022<Rev.001>)17/31
R8038 R92-5251-08 MG RESISTOR 24kΩ 1/16W D 1

R8115 RK73HB1J5R6J MG RESISTOR 5.6Ω 1/16W J 1

R9998 RK73GB2A000J MG RESISTOR 0Ω 1/10W J 1
RA131 RK74HB1J392J NET RESISTOR 3.9kΩ J 1
RA722 RK74HB1J102J NET RESISTOR 1kΩ J 1 E1,M1,M2,X1,R1,Q1,K0
RA723 RK74HB1J470J NET RESISTOR 47Ω J 1
RA724 RK74HB1J102J NET RESISTOR 1kΩ J 1

L1 L30-0790-08 RF COIL 1
L2 L33-2620-08 COIL 560uH J 1
L3 L40-2781-86 P COIL 0.27uH K 1
L5 L33-2620-08 COIL 560uH J 1
L6 L33-2497-08 COIL 4.7uH M 1
L8 L40-4781-86 P COIL 0.47uH K 1
L9 L33-2657-08 P COIL 4.7uH K 1
L10 L40-4781-86 P COIL 0.47uH K 1
L11 L33-2500-08 P COIL 1.8uH K 1
L801 L33-2505-08 COIL 22uH M 1
L901 L33-2436-05 CHOKE COIL 1
L902 L33-2625-08 COIL 100uH M 1
L961 L92-1001-05 CHOKE COIL 1
L8001 L33-2493-05 COIL 22uH M 1
L8002 L33-2505-08 COIL 22uH M 1
L8031 L33-2493-05 COIL 22uH M 1
L8101 L33-2493-05 COIL 22uH M 1

L8201 L33-2653-08 COIL 47uH M 1
CN101 E41-3070-08 CONNECTOR W-B (1-4) 1
CN103 E41-3299-08 CONNECTOR FFC/FPC (1-12) 1 E1,M1,M2,X1,R1,Q1,K0
CN104 E41-3364-08 CONNECTOR FFC/FPC (1-14) 1
CN110 E41-2248-05 CONNECTOR W-B (1-8) 1
CN111 E41-1685-05 CONNECTOR W-B (1-5) 1
CN112 E41-3067-08 CONNECTOR W-B (1-2) 1
CN114 E58-1124-05 CONNECTOR (1-20) 1
CN115 E58-1124-05 CONNECTOR (1-20) 1
CN119 E40-6526-05 CONNECTOR W-B (1-3) 1 M1,M2,X1,M3,M4,X2
CN901 E58-0991-05 CAR CONNECTOR 1
! F151 F53-0469-08 FUSE 5A 1 K1,K0
! F801 F53-0469-08 FUSE 5A 1
! F831 F53-0470-08 FUSE 2A 1
! F901 F52-0023-05 FUSE 10A 1
J101 E04-0346-08 ANT TERMINAL 1
(No.WA022<Rev.001>)18/31
J151 QNZ0907-001 CIR CONNECTOR 1 K1,K0
J1001 E63-0998-08 PIN JACK 1

J1003 E11-0680-08 3.5 JACK 1
K1 NQR0269-026X FERRITE BEADS 10.500mA 1
TH131 NAD0052-471X P THERMISTOR 470Ω 1
VA111 VR1005CCA270 VARISTOR(ZNR) 27V 1
VA151 VR1005CCA270 VARISTOR(ZNR) 27V 1 K1,K0
X1 L77-3840-08 CRYSTAL 1
X701 L77-3887-08 CRYSTAL 1
X702 L77-3806-08 CRYSTAL 32.768KHz 1
PANEL-A UNIT (LVA11039-13A) <PA>
IC401 MN103SH23 IC(MCU) 1
IC404 NL17SZ17XV5-X IC(DIGITAL) 1
IC405 XC6213B122NGX IC 1
IC406 TC7SP3125TU-X IC(DIGITAL) 1
IC431 A3V28S40FTP-G6 IC 1
IC441 JVM575C PROGRAMED IC IC441 IC451 will need to be 1
replaced in pairs
IC451 JVM576C PROGRAMED IC IC441 IC451 will need to be 1
replaced in pairs
IC501 NJM2831F92-X IC 1
IC511 NJM2904V-X IC 1
Q4601 DSA5001/R/ TRANSISTOR 1
D4001 HSU119TRF-E SI DIODE 1
D5201 HSU119TRF-E SI DIODE 1

C4020 CK73HB0J105K C CAPACITOR 1uF 6.3V K 1


C4168 CK73FB0J226M C CAPACITOR 22uF 6.3V M 1
(No.WA022<Rev.001>)19/31


C5004 CK73FB1C106K C CAPACITOR 10uF 16V K 1
C5202 CK73FB1E105K C CAPACITOR 1uF 25V K 1


R4166 RK73HB1J2R2J MG RESISTOR 2.2Ω 1/16W J 1
(No.WA022<Rev.001>)20/31


R5004 R92-5558-08 MG RESISTOR 36Ω 1/16W D 1
R5008 R92-5558-08 MG RESISTOR 36Ω 1/16W D 1

L4001 L33-2543-08 COIL 47uH M 1
L4601 L33-2654-08 COIL 47uH J 1

X4001 L77-3860-08 CRYSTAL 1
PANEL-B UNIT (LVA11042-11A) <PB>
IC611 BU33TD3WG IC 1
IC651 PIC95603 IR DETECT UNIT 1
Q6005 DSC7004/RS/-X TRANSISTOR 1
(No.WA022<Rev.001>)21/31

D6501 B30-3227-08 LED 1
D6502 B30-3227-08 LED 1
D6504 B30-3227-08 LED 1
D6506 SML-D12V8W/PQ LED 1
D6507 SML-D12V8W/PQ LED 1
C6003 CK73FB1E105K C CAPACITOR 1uF 25V K 1


RA601 R92-5559-08 NET RESISTOR 820Ω J 1

L6001 L33-2543-08 COIL 47uH M 1
CN601 QGZ1102K2-20X CONNECTOR (1-20) 1
CN602 QGZ1102K2-20X CONNECTOR (1-20) 1
CN654 E41-3301-08 CONNECTOR W-B (1-7) 1
EP651 E23-0795-08 EARTH TERMINAL 1
J6501 QNZ0963-002 USB CONNECTOR 1
J6502 E11-0675-08 3.5 JACK 1
JS651 T99-0484-05 ROTARY ENCODER 1
S6501 S70-0960-05 TACT SWITCH 1
S6502 S70-0960-05 TACT SWITCH 1
S6503 S70-0960-05 TACT SWITCH 1
S6504 S70-0960-05 TACT SWITCH 1
S6505 S70-0960-05 TACT SWITCH 1
S6506 S70-0960-05 TACT SWITCH 1

(No.WA022<Rev.001>)22/31
SUB UNIT (LVA11128-xxA) <SU>
IC201 NJM2561F1-X IC 1
IC211 NJM2535V-ZB IC 1
IC231 NJM2535V-ZB IC 1
IC241 NJM2505AF-ZB IC 1
D296 MC2850-T111 SI DIODE 1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
C241 CK73FB1C475K C CAPACITOR 4.7uF 16V K 1
C242 CK73FB1C475K C CAPACITOR 4.7uF 16V K 1

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
(No.WA022<Rev.001>)23/31
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
RA241 RK74HB1J392J NET RESISTOR 3.9kΩ J 1
CN222 E41-3069-08 CONNECTOR W-B (1-2) 1
CN231 E41-1699-05 CONNECTOR W-B (1-2) 1 E1,M1,M2,X1,R1,Q1,K0
CN261 E41-1697-05 CONNECTOR W-B (1-7) 1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
CN262 E41-1686-05 CONNECTOR W-B (1-6) 1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
J201 E63-0999-08 PIN JACK 1
J2000 E11-0679-08 3.5 JACK 1 E1,M1,M2,X1,R1,Q1,K0

E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
E2,R2,Q2,E1,M1,M2,X1,
M3,M4,X2,R1,Q1
BT UNIT (FOR BT MODEL) (LVA10924-13A) <BT>
IC301 TCC8600 IC 1 E1,M1,M2,X1,R1,Q1,K0
IC302 JVM501D PROGRAMED IC 1 E1,M1,M2,X1,R1,Q1,K0
IC303 A3V28S40FTP-G6 IC 1 E1,M1,M2,X1,R1,Q1,K0
IC304 BD6538G IC 1 E1,M1,M2,X1,R1,Q1,K0
IC311 M24256-BRMN6-X IC 1 E1,M1,M2,X1,R1,Q1,K0
IC331 AK4387ET-X IC 1 E1,M1,M2,X1,R1,Q1,K0
IC332 NJM4565E-X IC 1 E1,M1,M2,X1,R1,Q1,K0
IC341 NJM4565E-X IC 1 E1,M1,M2,X1,R1,Q1,K0
IC371 XC6213B182NG-X IC 1 E1,M1,M2,X1,R1,Q1,K0
Q3311 2SC1623A/5-6/- TRANSISTOR 1 E1,M1,M2,X1,R1,Q1,K0
D3311 RKZ6.2KG(B2) Z DIODE 1 E1,M1,M2,X1,R1,Q1,K0
D3312 HSU119TRF-E SI DIODE 1 E1,M1,M2,X1,R1,Q1,K0
C311 CK73FB0J106K C CAPACITOR 10uF 6.3V K 1 E1,M1,M2,X1,R1,Q1,K0
C333 CK73HB1A104K C CAPACITOR 0.1uF 10V K 1 E1,M1,M2,X1,R1,Q1,K0

C372 CK73FB1A225K C CAPACITOR 2.2uF 10V K 1 E1,M1,M2,X1,R1,Q1,K0
C3010 CK73HB1E103K C CAPACITOR 0.01uF 16V K 1 E1,M1,M2,X1,R1,Q1,K0
C3102 CK73HB1H821K C CAPACITOR 820pF 50V K 1 E1,M1,M2,X1,R1,Q1,K0
C3103 CC73GCH1H151J C CAPACITOR 150pF 50V J 1 E1,M1,M2,X1,R1,Q1,K0
C3143 CC73HCH1H471J C CAPACITOR 470pF 50V J 1 E1,M1,M2,X1,R1,Q1,K0
C3145 C93-1600-08 C CAPACITOR 0.012uF 16V K 1 E1,M1,M2,X1,R1,Q1,K0
(No.WA022<Rev.001>)24/31

C3301 C90-5968-08 E CAPACITOR 100uF 16V M 1 E1,M1,M2,X1,R1,Q1,K0
C3303 CE32BJ1C470M E CAPACITOR 47uF 16V M 1 E1,M1,M2,X1,R1,Q1,K0
C3311 C90-5968-08 E CAPACITOR 100uF 16V M 1 E1,M1,M2,X1,R1,Q1,K0
C3323 CE32BJ1C470M E CAPACITOR 47uF 16V M 1 E1,M1,M2,X1,R1,Q1,K0

C3473 CK73HB0J105K C CAPACITOR 1uF 6.3V K 1 E1,M1,M2,X1,R1,Q1,K0
C3492 CK73HB1C473K C CAPACITOR 0.047uF 16V K 1 E1,M1,M2,X1,R1,Q1,K0
R322 RK73HB1J472J MG RESISTOR 4.7kΩ 1/16W J 1 E1,M1,M2,X1,R1,Q1,K0

R3010 RK73HB1J100J MG RESISTOR 10Ω 1/16W J 1 E1,M1,M2,X1,R1,Q1,K0

R3455 RK73HB1J105J MG RESISTOR 1MΩ 1/16W J 1 E1,M1,M2,X1,R1,Q1,K0

(No.WA022<Rev.001>)25/31
RA301 RK74HB1J680J NET RESISTOR 68Ω J 1 E1,M1,M2,X1,R1,Q1,K0
RA306 RK74HB1J472J NET RESISTOR 4.7kΩ J 1 E1,M1,M2,X1,R1,Q1,K0
L3001 L92-1006-08 CHOKE COIL 1 E1,M1,M2,X1,R1,Q1,K0

L3301 L33-2543-08 COIL 47uH M 1 E1,M1,M2,X1,R1,Q1,K0
L3462 L33-2500-08 P COIL 1.8uH K 1 E1,M1,M2,X1,R1,Q1,K0
L3473 L33-2656-08 COIL 33uH M 1 E1,M1,M2,X1,R1,Q1,K0
CN311 E41-3366-08 CONNECTOR FFC/FPC (1-12) 1 E1,M1,M2,X1,R1,Q1,K0
X3402 L77-3888-08 CRYSTAL 1 E1,M1,M2,X1,R1,Q1,K0
DVA DVD UNIT (D40-2248-08/FMU-XS2-21D) IN DVD MECHA <DVA>
IC101 RT3CLLM/EF/-X TRANSISTOR 1
IC102 RT3K11M-X MOS FET ARRAY 1
IC201 BD8215EFV-X IC 1
IC301 MN2DS0040MA IC 1
IC381 JVM532H PROGRAMED IC 1
IC401 AK4387ET-X IC 1
IC501 BR24T32FVT-W-X IC 1
IC511 MFI341S2162-X IC 1
IC901 MM3233CF-X IC 1
IC921 BD12KA5FP-X IC 1
Q4 DSC2001/R/-X TRANSISTOR 1
Q101 2SB1424/R/-W TRANSISTOR 1
Q103 2SC4617 TRANSISTOR 1
D6 AN1102W-6-X IR LED 1
D9 PS1192HB-22-X PHOTO TRANSISTOR 1

C102 C91-2327-08 C CAPACITOR 47uF 6.3V M 1
C122 CK73HB1C333K C CAPACITOR 0.033uF 16V K 1

C201 C91-2330-08 C CAPACITOR 47uF 16V K 1

(No.WA022<Rev.001>)26/31
C310 CK73HB1H103K C CAPACITOR 0.01uF 25V K 1

C381 C91-2325-08 C CAPACITOR 22uF 6.3V K 1


R104 RK73GB2A2R2J MG RESISTOR 2.2Ω 1/16W J 1
R105 R92-5557-08 MG RESISTOR 27Ω 1

R115 R92-5433-08 MG RESISTOR 39Ω 1
(No.WA022<Rev.001>)27/31

R201 R92-5430-08 MG RESISTOR 0.22Ω 1
R202 R92-5430-08 MG RESISTOR 0.22Ω 1
R204 R92-5431-08 MG RESISTOR 0.47Ω 1
R205 R92-5431-08 MG RESISTOR 0.47Ω 1

R271 R92-5608-08 MG RESISTOR 62kΩ 1/16W J 1
R273 R92-5562-08 MG RESISTOR 6.2kΩ 1/16W J 1

R351 RK73GB2A105J MG RESISTOR 1MΩ 1/16W J 1
R601 R92-5605-08 MG RESISTOR 27Ω 1/8W F 1

R911 R92-5429-08 MG RESISTOR 0.18Ω 1
B341 RK73GB2A000J MG RESISTOR 0Ω 1/10W J 1
K101 L92-0657-08 FERRITE BEADS 1
K381 RK73GB2A000J MG RESISTOR 0Ω 1/10W J 1
(No.WA022<Rev.001>)28/31

S1 S74-0829-08 DETECT SWITCH _SW 1
X351 L77-3863-08 CRYSTAL 1
DVB DVD UNIT (D40-2245-08/FMU-XS2-41D) IN DVD MECHA <DVB>
IC101 RT3CLLM/EF/-X TRANSISTOR 1
IC102 RT3K11M-X MOS FET ARRAY 1
IC201 BD7905BFS-X IC 1
IC301 MN2DS0040MA IC 1
IC381 JVM595A PROGRAMED IC 1
IC401 AK4387ET-X IC 1
IC501 BR24T32FVT-W-X IC 1
IC511 MFI341S2162-X IC 1
IC901 MM3233CF-X IC 1
IC921 MM1701CH-X IC 1
Q12 LTC044EEB-X DIGI TRANSISTOR 1
Q103 2SC4617 TRANSISTOR 1


C251 C93-1626-08 C CAPACITOR 110pF 50V J 1
(No.WA022<Rev.001>)29/31




R105 R92-5557-08 MG RESISTOR 27Ω 1
R115 R92-5433-08 MG RESISTOR 39Ω 1

R201 R92-5431-08 MG RESISTOR 0.47Ω 1
(No.WA022<Rev.001>)30/31
R202 R92-5431-08 MG RESISTOR 0.47Ω 1
R204 R92-5431-08 MG RESISTOR 0.47Ω 1
R205 R92-5431-08 MG RESISTOR 0.47Ω 1


R351 RK73GB2A105J MG RESISTOR 1MΩ 1/16W J 1

R911 R92-5429-08 MG RESISTOR 0.18Ω 1
CN11 E41-3370-08 CONNECTOR W-B (1-3) 1
K381 RK73GB2A000J MG RESISTOR 0Ω 1/10W J 1

S1 S74-0829-08 DETECT SWITCH 1
X351 L77-3863-08 CRYSTAL 1
(No.WA022<Rev.001>)31/31
SCHEMATIC DIAGRAMS
DDX3021 DDX3049 DDX3051
DDX319 DDX4021BT DDX4031
DDX4031BT DDX4031BTM DDX4031M
DDX4049BT DDX4051BT DDX419
(No.WA022<Rev.001>)1/32
(No.WA022<Rev.001>)2/32
BLOCK DIAGRAM 1/2
DVD UNIT MA0 to 11, MDQ0 to 15, DQM0/1 SUB UNIT

A, B, C, D, E, F, RF+/-, LPC, HAGUP, VREFH BA0, BA1, MCK, NWE
FOCUS CD VR NCSM, NCAS, NRAS IC391 see 2/2 for the details
& DVD VR CD/DVD SDRAM
IC102 , Q103
TRACKING CN201 CN202
BCK, PCMCLK, LRCLK
COIL CN101 HFM VCC
S5V DAC0CS, DACPDN
LPCO1 DDATA, DCLK
CN104 CN108
FROL-CH
DVD LD DVDLDCUR IC401 FROR-CH MAIN UNIT CV_OUT, R, G, B VOUTSW1
Q101 , Q102 VIDEO_M_SW1 DVD_CV
PICK UP LPCO2 AOUT0, AOUT3
DAC COMPOSITE
VIDEO_M_SW2 VOUTSW2
CD LD IC101 CDLDCUR
VOUTMUTE
DAC4 (DAC4_CVBS)
CN111
F+, F- D+, D- D+, D-
LOAD T+, T- USB
UCS, SCS, , SCLK, LRMUTE
MOTOR LM, FG, DRVCNT U2SDT, S2UDT
DVD_FL
LDO+, LDO- /DRVMUTE DVD_FR
M IC201 TRDRV, FODRV
H1+/- NAVI_RX, NAVI_TX
H2+/- SPDRV, PRTOUT IC301 Cr(P), NAVI_AL, NAVI_AR
J151
EXADT0 to 15 R, G, B
SPINDLE H3+/- DRIVER
SL1IN, VHALF Cb(P), MEMORY SXI CONNECTOR
EXADR16 to 20
CN201
SLED1+/- Y(P) IC261 Q971 , Q972 BATT

MOTOR SLED2+/-
NEXOE, NEXCE
IC152 , IC153 US only
DV5 NEXWE IC381 CP/RGB_SW PS2
M SM1 to SM3
US only NAVI_RX, NAVI_TX
Except US
REST TRVSW FLASH ROM
REST SW
CN401
CN105
Y/G OUT,
NRST /FL_RST CPURST CB/B OUT,
CR/R OUT J101
IC511 TU_SDA, TU_SCL
RST_I, I2CSDT
D3.3V IC11 ANTENNA
IPOD DECODER I2CSCL SACK, SW1, USBNEN, SW4, CPURST
X351 AUXL
P3.3V S2UDT, U2SDT, SCLK, SCS, UCS, LRMUTE TU_L, TU_R
FM/AM TUNER X1 JACK
27MHz S3.3V IC901 D4V AUXR IC191 4MHz
M5V AUXCOM LPF
EPWP
3.2V_REG
D6,D7 ACC5V
I2CSCL
D1.2V D2V
5.3V IC831 MUXBL, MUXBR Q1341 J1003^C
VOLDA
IR LED IC501 I2CSDT IC921 (CN111) Q8022 USB_PWR
2ND MUTE
1.2V_REG VOLCK 2ND AUDIO OUT
EPROM USB
SW3 5V REG CDCHL, CDCHR, CDCHCOM
D9,D11
CN11
Q4 , Q11 IC721
PHOTO SW1 Q871 to Q875 EEPROM AV-IN
PHOTO SW Q12 MEMORY IC141 PREFL, PREFR
J1001
SENSOR Q8021 , Q8104 PRERL, PRERR
VOLMUTE0
E.VOLUME Q1121 , Q1221 FRONT_OUT
S1 SW4 SW VOLMUTE1 L.O.MUTING
Q302 M5V, S5V VOLMUTE2 OUTSWL
REAR_OUT
DETECT SW D4V, A5V PWIC_DC_DET
SW1, SW4
BT5V IC802
SW_FREQ_SEL
5V SWREG.
MUTE, 2NDMUTE
Q1401
SW_MUTE
Q1501 , Q1503 , Q1504 SW MUTING
R_MUTE PREFMUTE SW_OUT
CN101
SW3.3V Q8101 , Q8102 , Q8103 Q1505 , Q1507
SWMUTE
Panel section 3.3V SW.REG IC803 IC701 BKLAMP
MUTING REVERSE
PANEL-A UNIT PANEL-B UNIT-1 SW.REG Q1961 GEAR
CV_OUT(CVBS) IC851 CONTROL PARK
17.2V
Q1942 , Q1943 , Q1944
Y/G OUT Q8201 , Q8202 , Q8203
CN603
CPU
CN401
CN501
ILMI FL, FR
CB/B OUT 17.2V/-15V SW.REG
TFT -15V RL, RR
CN601
CN114
CR/R OUT PWIC_MUTE IC101

MODULE see 2/2 for the details see 2/2 for the details FRONT L+/-
VDD3.3V IC821
VDD5V POWER AMP. FRONT R+/-
REAR L+/-
3.3V AMPKILL Q1301 , Q1302 STBY REAR R+/-
SYSDATA STBY
FLCH, FRCH IC181 ACIN3L, ACIN3R TELMUTE TEL

FROM IC141 D1931 TEL MUTE
ISOAMP ILL
DIMMER
Q1951 ILUM POWER CORD
CN901
ASSEMBLY
ACC, REMOTE
ANT-REM
PANEL-B UNIT-2
CN604
CN651
X0, X1, Y0, XDATA KEY1, KEY2, TPKEY1, TPKEY2 MEMORY

YDATA, KEY1, KEY2 TPX1, TPX2, TPY1 IC801
(SPK)
PON CTRL REGULATOR
Q801 to Q805 ANT D1921 AUTO ANT (BATTERY)
CN115
CN602
J652
REMOCON
FRONT see 2/2 for the details
IC751
D1922
REMO_MIX
AUX
VDD3.3V
EACH BLOCK
SYSCE, APPDATA, APPCE, APPCLK, APPRST, DETACH, SI
PON3.3V VDD5V, SW5V, ACC5V OE_REMOTE
Q821
RESET A9V, CD8V, ILMI, EXT
STEREO SWITCH
CN119
Q822
X701 STEREO_SW IC931

DDX4031, DDX4031BT
CN605 CN606 IC731 VDD3.3V 20MHz DDX4031, DDX4031BT only only
Q731
X702
CN112
RESET FAN FAN OUT FAN
32.768KHz
M
BTTX, BTRX, BTRST, BT_MUTE_CTL MOTOR
TFT PANEL TOUCH BT_L
BACK LIGHT PANEL BT_R
UNIT
CN103
Used on DDX4*BT series only
CN311
BT UNIT see 2/2 for the details

(No.WA022<Rev.001>)3/32
BLOCK DIAGRAM 2/2 Used on DDX4*BT series only MIC IN VIDEO OUT / CAMERA IN / REAR VIDEO IN TO SW PWB CN654
J2000 J201 CN222
CV
IC201
CN261
6 dB AMP IC241 VIN2 NAVI_RX, NAVI_TX, NAVI_AR, NAVI_AL NAVI IN
CN231
TO BT PWB VIDEO IN AMP Except US
CN341
VIN3 VIN3
IC211 IC231 CV_OUT
VIDEO PANEL
VIN1 VIN1
OUT SW OUT SW
CN262
NAVI IN
VIDEO_M_SW1
VOUTSW1, VOUTSW2
R, G, B Except US
VOUTMUTE VIDEO_M_SW2
DVD_CV
SUB UNIT
Panel section CN201 CN202
CN104 CN108
PANEL-A UNIT PANEL-B UNIT-1
D3.3V Y/G, cb/B, cr/R,

IC405 CVBS, SYS DATA
1.2V
CN114
CN601
REG.
FL, FR
VCOM BKL
IC511 SDATA, SCLCLK, APPDATA, APPCLK,, SYS DATA
VCOM, BL SYSCE, APPRST, APPCE, LEDR, LEDG, LEDB
SYSCE, APPDATA,
BL_DC
BUFFER APPCE, APPCLK,
IC401
CN501
X4001 SDATA, APPRST,

TFT IC404 33MHZ SCLCLK
CN401
CN603
MODULE
GERDA Q4601 CVBS BL_DC
R0 to R5, G0 to G5, B0 to B5 CVBS BUFFER

13V
STV, STH, STB, CPV DETACH/SI
REMOCON,
MAIN UNIT
CN115
CN602
LCD_CLK, LCD_OE Q4611 , Q4621 , Q4631 Cr/R, Cb/B, Y/G
RESETSW,
RGB BUFFER
R_ENC1,
RA601 R_ENC2,
KEY1, KEY2
RA602
X0, X1, Y0
IC441 , IC451 IC431 13V LEDR
IC501 XDATA
LEDG
FLASH ROM SDRAM 9.2V YDATA
9.2 REG. LEDB
22V
Q5201 , Q5202 , Q5203
18V Q6101 to Q6105
18V REG. TP DRIVER
-20V
Q5301 , Q5302
-6V
-6V REG.
CN103
CN311
5V
PANEL-B UNIT-2
JS651 R_ENC1, R_ENC2 BT UNIT BT_L 9V Q3311 (IC331)
BR_R DAC_MS DAC 5V
VOLUME/ATT IC332 IC331
DAC_MC
S6504, S6503, S6502 KEY1 L.P.F. DAC DAC_MD BT3.3V 1.8V
AV SW, MENU SW, EJECT SW IC371
DAC_MCLK
LEDR, LEDG, LEDB 1.8V REG.
UTX DAC_DAO
X3402
Q6005 2.9V URX DAC_BCLK
Q6201 , Q6202 , Q6203 12MHz
CN651
CN604
CN341
18V Q6010 MUTE_CTL DAC_LRCK
D6506
RGB LED REMOCON Q6011
EJECT LED MIC IC341 MIC IN
18V REG. TRST MIC AMP
RESETSW IC301
D6501, D6502, D6504 IC651 Q6001 to Q6004
KEY2
BLUETOOTH MICON
KEY LED REMOTE CONTROLLER Q6006 to Q6009 UH1+, UH1- USB REAR
CN302
FL, FR BACK LIGHT DONGL
DRIVER
S6501 SI
TO SW PWB
XA12 BT5V
S6505, S6506 IC304
RST SW
TEL SW, FNC SW XA17 to XA19 XD0 to XD15 USB 5V SW CN654
J6502
OE, NOR_CS XA0 to XA11 XA21

FRONT D6507 CN605 CN606 MODE0 XA13 to XA16 SD_CLK SCL
AUX SI LED RESET XA20, WE SD_CKE SDA
USBPWR2_EN
FV
IC302 IC303 IC311
J6501
FLASH ROM SDRAM EPROM

USB TFT PANEL
VBUS, D+, D- TOUCH PANEL
BACK LIGHT UNIT
CN654
Used on DDX4*BT series only
TO BT PWB CN302 and VIDEO PWB CN222

(No.WA022<Rev.001>)4/32
MAIN UNIT-1 (LVA11038-xxA)
*9 2nd_Audio
KW-AV60 DDX3/DDX4
KW-AV6*BT DDX4BT
J1003 NI QNS0301-002
C1141/C1241 NI NDC31HJ-101X
C1142/C1242 NI NCB20JK-475X
R1141/R1241 NI NRSA02J-101X
*9 *9 *9
R1144 C1142
R1141
1/10W
R1142/R1242 NI NRSA63J-473X
OPEN
R1143/R1243 NI NRSA6AJ-472W
OPEN OPEN
*9
R1244
*9
C1242
*9
R1241
R1144/R1244 NI NRSA6AJ-471W
OPEN IMX9-W OR KTC812T-X
OPEN Q1341 NI
TUNER OPEN 1/10W
*9 OR DMC20402-W
R1143
OPEN
D1341 D1341 NI MC2836-X
OPEN
OPEN
*9
OPEN 6 5 4
D1504 NI MC2836-X
OPEN
OPEN
OPEN
2NDMUTE
*9 Q1341
*9
Q1504 NI DRA9114E-X
*9 J1003
Q1508 NI DRC9143Z-X
C1141
C1241
0.01/16
1 2 3
R1242
R1142
R1243
OPEN
OPEN
0.1/10
1
*9
*9
*9
*9
*19 TUNER RF OPEN 2 2nd_AUDIO_OUT Lch
3 2nd_AUDIO_OUT Rch
AV_J.Ver
C18
1/16
0.1/10
C1170 R1151
0.01/16
0.01/16
DDX3/DDX4/
C16
C41
AV_EXcept_J.Ver
C21
C14
2.2k
DDX4BT
100p
R1152
C1151
47k
0.01/16
0.01/16
R1 NI NRSA63J-0R0X 10/16 R1350 10
R19 100 TU_SDA
AUX_SEL C1370
560
1/16
4.7k
K1 NQR0269-026X NI
0.1/10
1/8W
R23 100 TU_SCL 1/10W
100p
C10
C13
L2
560
3.9k
OPEN
R1252
C1251
R14
ONLY AV
47k
5
2
C26
C30
C12
VA121
22
R1251
NAF0034-270X
NAF0034-270X
NAF0034-270X
1/16
L5
C1270
C1351
R21
J1001
VA111
RA131
0.047/16
2.2k QNN0861-001
VA131
D1351
ANTENNA JACK
*12
1
R1161 47k
AV-IN Lch
4
1
3
8.5V
8.5V
2.0V
2.2V
4.1V
5.6V
8.5V
7.1V
3.9V
3.2V
3.2V
*12
0V
0V
0V
0V
0V
R1261 47k
FL
FR
RL
RR
PRE_FL
PRE_FR
J101
*12
QNB0348-001 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 R1361 47k
C1122 1/10W
*IC161_LOGIC *12 FL
AV-IN Rch
AMSELOUT2
AMSELOUT1
AMIFAGC1
AMSELIN2
AMSELIN1
TEST
PLLREF
PLL
VCODEC
GND
VCC1
VREGSUP
VREF
SDA
SCL
GNDD
1 R1162 47k PRE_FL R1123 470 4.7/50 R1121 100 2
TEF6614TV1S3-X
2 A/B/C 1/10W
C1222 3
3 L 0X,0Y,0Z PRE_FR R1223 470
4.7/50 FR R1221 100
8.5V
4.3V
4.3V
4.3V
4.3V
H 1X,1Y,1Z *16 R1124
0V
0V
0V
IC11
AMIFAGC2
4
AMRFAGC
AMRFDEC
D1121 0V
FRONT_OUT Lch
47k
GNDAUD
MPXOUT
16 15 14 13 12 11 10 9 2.2k
AMRFIN
Q1121 0V 6 5 4
GNDRF
NQR0269-026X
MPXIN
XTAL2
XTAL1
0V
FMIN2
FMIN1
ROUT
R1602
10k
VCC2
LOUT
IMX9-W
RSSI
R1122
VCC
Y-COM
X-COM
1X
0X
C
PRE_FMUTE
0.001
22/16
OPEN
*12
47k
R1
K1
OR KTC812T-X
*16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 OR DMC20402-W 5
R1222
R1224 1 2 3 0V
*19
*19
MC2836-X 0V
FRONT_OUT Rch
Z-COM
*12 0V
0V
0V
0V
0V
GND
PATTERN_FUSE
VEE
C1602
C1603
IC161
INH
3.1V
3.1V
8.5V
0.5V
3.8V
3.8V
0.7V
3.6V
4.0V
0.7V
1Y
0Y
1Z
0Z
2.2k 6
TC74HCT4053AFTX
-
L1 1 2 3 4 5 6 7 8
22/16
*16 F1001
C42
C23
0.001
10p
*12
*12
0.22/16
R1134
0V
0V
0V
47k
7
0.1/10
R1603
10k
REAR_OUT Lch
4.3V
4.3V
4.3V
4.3V
4.3V
QAX0952-001Z
C29
C19
7
C9
C27
*12
1/16
4MHz
L3
R1132
X1
*12 2.2k 0V 0V
47k
C1604
D1221 0V 6 5 4 Q1221
4
3
0.27 R1362 47k
15p IMX9-W
27p
C8
R1232
2
*12 OR
*12
R1262 47k 8
KTC812T-X REAR_OUT Rch
470p
1
C1
0V OR
100p
100p
100p
100p
*16 1 2 3 0V DMC20402-W 9
8
R1234 0V
MC2836-X
AUDIO_SEL
QQR1872-001 C1161 1/16 PRE_RL R1133 470 2.2k RL R1131 100
C1121
C1131
C1221
C1231
C46 2p
4.7
L9
1/16 C1132 4.7/50

C45 C1261 1/10W
C22
R17 R1233
7p C1162 4.7/50 PRE_RR 470 C1232 RR R1231 100
CN101
OPEN
OPEN
L10 R1375 4.7/50 1/10W
OPEN C1262 4.7/50 QGA2501C1-04
VOL_MUTEB
VOL_MUTEC
0.001 *16 *16
0.01/16
PATTERN_FUSE
*6 4.7k R1403 C1402 R1401
0.47 C1163 1/16 PRE_SW_L 820 SW
SW_OUT
0.47
L8
L11 4
R1196 *6 C1369 F1002
1.8 C1263 1/16 0V 220
VA1
OPEN
OPEN
10/25
680k
680k
R16
R22
0.22/16
C24
R1404 1/10W C1400 3
R1402
1/16 SWMUTE 0V C1401
4.7k
REVERSE GEAR
OPEN
C11
C28
C25
OPEN
OPEN
C17
10k
C1192 C1195 0.001 2
Q1401
11.9V
C44
R1192 R1195 100p

C20
100/16
*16
10/25
*12
6p
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
4.0V
4.0V
4.0V
4.0V
5.7V
5.7V
4.7k
0V
PARKING
CRS03-W
1
0V
0V
RKZ5.6B2KG-X
C1164 INC2002AC1-X
R1376
D1371
OPEN
4.7k 100
C1367
10/25 470p
D1372
MDR 64
MDL 63
CDR 62
CDL 61
TUNERR 60
TUNERL 59
MUTEA 58
MUTEB 57
MUTEC 56
PAOUT0L 55
PAOUT0R 54
PAOUT1L 53
PAOUT1R 52
VP 51
LDOUT0L 50
LDOUT0R 49
33p
R1393
REVERSE
10k
*7 1/16
R1284
*7
R1384
R1184
C1368
OPEN
R1154
C1168
C1158 1/16 PARKING
OPEN
C1366
*12
*12
*12
*12
C1364
L6
4.7
1/10W
OPEN
100
OPEN
0.0068/25
C1152
R1153
C1194
C1193
R1193
R1374 R1373 *16
470p
4.7k
1/16 3.3V 5.7V
RKZ18B2KG-X
*7 *7
ONLY DDX
C50
0.01
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
C1191 CDCHL PREF
1
10/16
R1394
OPEN
R1352
DDX3/DDX4
C1268
OPEN
OPEN
C1358 R1191 R1194 100 2.2k
*12 3.3V 0V KW-AV60
10k
C1393
10/25
CDCHCOM PGND
DDX4BT
2
C1264
1/10W
KW-AV6*BT
C1941
C1961
47 3.3V 5.7V PRE_RL
OPEN
OPEN
10/25 4.7k 100
D1961
C1252
CDCHR LDOUT1L
Sxi CONNECTOR
3
R1124/R1224
R1253
1/16 3.3V 5.7V PRE_RR

*7 AUXL LDOUT1R NRSA6AJ-222W NRSA6AJ-472W
4
C1962
*7 C1258 1/16 R1254
3.3V 5.7V PRE_SW_L R1134/R1234
E.VOLUME
OPEN
C1169
OPEN
4.2V
4.2V
4.2V
AUXCOM LDOUT2L
5
0V
100
1/10W
3.3V 5.7V R1401 NRSA02J-221X NRSA02J-101X
NAF0034-270X
NAF0034-270X
NAF0034-270X
VA152
4 3 2 1 AUXR LDOUT2R
VA151
VA153
6
*7 3.3V 0V R1402 NRSA6AJ-103W NRSA6AJ-473W
OPEN
C1269
NJM4565E-X
J151 MUXAL GND
Sxi POWER
7
C1372
R1403 NRSA6AJ-821W NRSA6AJ-471W
*7
*7
*7
3.3V 8.5V
IC141
IC191
QNZ0907-001 ! MUXAR VCC
8
3.3V 3.3V
LPF MUXBL ACIN0L
OPEN
9
11 *7 F151 3.3V 3.3V C1371
16 15 14 13 12 11 10
NMFZ028-5R0X-J1 MUXBR ACIN0R
Sxi-AL (NC) Q1351 3.3V
TDA7415CB 3.3V
5 6 7 8 MUXCL ACIN1L 100/16
RR OUT+
FR OUT+
RL OUT+
TUNER_TX TUNER_RX
RR OUT-
FL OUT+
3.3V 3.3V
FR OUT-
RL OUT-
AC-GND
FL OUT-
1 2 3 OPEN *17 *17
POWER AMP.
S-GND
MUXCR ACIN1R
MUTE
R1377 C1379
RR IN
STBY
FR IN
4.2V
4.2V
4.2V
8.5V
RL IN
R1368
FL IN
3.3V
GND
GND
Vcc1
GND
GND
Vcc2
GND
Sxi-AR (NC)
HSD
3.5V
REF
4 5 6 7 WININ ACIN2L
NAD0052-471X
Sxi-AG Power 1k 4.0V 3.3V
IC101
TH131
D S OPEN OPEN
WINTC0 ACIN2R *10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
8
8 9 10
R1391
OPEN
OPEN
GND PWREN 4.0V 3.3V C1167 1/16

TB2926CHQ
10k
D S *17
C1293 WINTC1 ACIN3L
0V
0V
0V
0V
0V
0V
C1353
R1294 R1369 R1379
7.2V
4.7V
7.2V
7.2V
7.2V
8.4V
6.9V
6.9V
6.9V
6.9V
6.9V
7.2V
7.2V
7.2V
3.3V
7.2V
3.5V
14.4V
14.4V
3.3V 3.3V C1267 1/16
0.1/50
C1352
R1353
D S
1/16
1/16
DCERR ACIN3R C1106
*7
12 *10
D 100 10k OPEN
470p
5
G D1304
ACOUTR
R1309
C1309
ACOUTL
ONLY DDX
REFV5V
REF3V3
VOLINR
SARES.
VOLINL
SAOUT
C1291 0.22/16
MUTE0
MUTE1
MUTE2
SACLK
0.01
R1291 R1293
C1166
C1266
SAIN
SDA
SCL
SEL
*14 C1103 C1107 *14 RKS801KF-X
C1392
10/25
R1103 OPEN OPEN R1101 12k
OPEN
*7 R1102
OPEN
FL
R1355
R1354
10/25 4.7k 4.7k FL
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
VA154
N N
0 120 0
1/16
R1392
1/16
1/16
0V
0V
0V
0V
10k
C1294 C1116
C1391
6.9V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
NAF0034-270X
47/25
OPEN
*7
ONLY AV
VA156 0.0068/25
Q1352 SXI_PON
C1302
C1292 0.22/16 *14
1/50
1/50
1/16
*14
0.01/16
R1292 C1295 R1112 R1111
C1165
C1365
C1265
NAF0034-270X OPEN R1295 R1113
R1378
*7 RL RL
VA155 C1314
N N
ONLY DDX
100
*17
10/25
OPEN
0
220
10k
4.7k 470p 0 120
30
10/25 C1113 C1117
82p
C1373
C1374
C1375
C1376
C1380
OPEN
*12
*12
*12
C1307
NAF0034-270X R1296 OPEN OPEN
0.47/10
0.47/10
100p
100p
OPEN
OPEN
C1310
C1301
TH721
C1305
OPEN
OPEN
OPEN
4.7k
C1377
C1303
C1378
2p
R1370
R1371
OPEN
82p
C1304
*17
1/16
C1104
C1114
C1308
C1112
C1102
C1105
C1306
10/25
*14 P.AMP_INPUT
KW-AV60 DDX3/DDX4
OPEN
OPEN
R1307 KW-AV6*BT DDX4BT
OPEN
R1372
C1204
100p
100p
C1214
100k
C1212
C1202
C1205
1/10W
1/10W
1/10W
5V<->3.3V R1102/R1202
100
100
100
*17 *17 C1213 C1217 43

*14
R1601 C1601 *14
R1213 OPEN OPEN R1212 R1211 R1112/R1212 NRSA6AJ-121W NRSA6AJ-750W
RR RR
R1326
R1359
R1356
*7
R1318 N N
R1103/R1203
R1308
12k
0 120 0
*7
*7
*7
OPEN OPEN
R1113/R1213 NRSA6AJ-0R0W NRSA6AJ-510W
*7 0 C1216
R1364
0.22/16
*14 *14
R1203 C1203 C1207 R1202 R1201 TP901
0 FR FR N N
R1360
R1357
0
OPEN
0 120 0
*7
*7
OPEN CN901
MC2836-X
MC2836-X
MC2836-X
3.2V 3.2V C1206 C904 C902 QNZ0607-001
TP738
D1401
D1402
D1403
B VCC
ONLY DDX
1
2.2/50 2.2/50
0V BUZZER 0.22/16 GND
A *10 1 GND
2
NAVITX R1301 L902 ACC

0V 0V R1281 *10 PWIC_MUTE
GND Y *10 2 ACC
3
0 C1281 IC181
33k 100 REMOTE
R1327
100k
1/16 NJM2794RB2-X 3
C1201 C1211 C1111 C1101 REMOTE
*17 *10
0
*10 C1282 *10 R1304

C1382 D1303 AUTO ANT
C1354
R1363
10k
*7 C1381
100k
0.01/16
IC152 4 AUTO ANT

*7
1/16
R1110
R1310
R1210
47/25
74AHC1G08GW-X KW-AV60/6*BT DDX3/DDX4 4.3V 4.3V 0.01/16
Q1302 RKS801KF-X
330 100p 100p 100p 100p FRONT R+
FRONT R+
IN2+ OUT2 5
*7
DDX4BT *10
*7
5
KW-ADV64BTJ *10
R1282
R1381 4.3V 8.5V DRA9114E-X FRONT R-
R1382 IN2- 6 FRONT R-
VCC
4
0
R1378 NI NRSA6AJ-300W 1.3k
*7
*7
*7
R1303
*10
0V 4.3V 4.9V 4.9V FRONT L-
POWER CORD
NI Vref 7 FRONT L-
C1313
8
3
C1377 NI NDCA1HJ-2R0W
R1385
4.3V 0V 47k FRONT L+
1/16
1/10W
1k
10k
*7 GND 8 FRONT L+
2
R1319 IN1-
*10
R1377 NI NI 4.3V 4.3V REAR L+
ASSEMBLY
OUT1
10
R1311 IN1+ 9 REAR L+
1
R1182
C1379 NI NI *10 0V
C1312
NAVIRX *10 REAR L-
0 *10 C1182
1/16
R1181 10 REAR L-
1/16
*10
*7
R1379 NI NRSA6AJ-100W PWIC_STB
(BATTERY)
R1315
R1305
OPEN
R1386 3.3V REAR R-
R1302
0 0 *10 C1181
2.2k 11 REAR R-
47k
R1601 NI NRSA6AJ-100W 1/16 REAR R+
R1325
R1358
0 D1281 12 REAR R+
0
(SPK)
C1601 NI NDCA1HJ-7R0W 0V R1971
OPEN
OPEN OE REMOTE
*7
*7
R1313
Q1311 D1181 13 OE REMOTE

OPEN Q1301 1.5k TEL TEL
OPEN
*10 *10 14 TEL
C1383 1/8W
4.9V 4.9V D1382 *10 DRC9114E-X ILL ILL
D
B VCC 22/16 RKS801KF-X D1381 15 ILL

1
D1912 CRS03-W
1
3.0V RKZ4.7B2KG-X MEMORY

A QQR1883-001 16 MEMORY
2
OPEN
0V 4.1V FUSE
R1312
G
2
GND Y 17
3
R1972
100k
ST_REM
OPEN
L901 FUSE
R1316
18
*5 AUTO ANTENNA FUSE 10A
*7 R1314
C1355
*7
0.01/16
100k
IC153 *20 D902 F901
PWIC_DC_DET
!
*7
74AHCT1G08GW-X QMFZ064-100-J1
A9V
VOL_MUTE0
VOL_MUTE1
VOL_MUTE2
*7
OPEN TP902
CRS03-W
R1541
MBRX130-TP-X
MBRX130-TP-X
1/10W
2700/16
OPEN
OPEN
4.7k
1/8W
1/8W
OPEN
0.1/50
OPEN 4.9V
1N5402-BPC04
3.3k
OPEN
RKZ6.2B2KG-X
4.9V
*7
D901
Q1541
D1971
*POWER CODE ASSY
OPEN
DRA9114E-X
0V
OPEN
R1921
R1911
R1951
B VCC
C1921
C1911
C1931
C1951
C901
1
D1911
R1912
C903
KW-AV60J,U,UF
D1922
D1921
A *7
2
R1542
KW-ADV64BTJ KW-AV60 E,EU
DDX:3900/16
0V
EXT
*5
*5
*24
*5
GND Y
*5
3
0 3.2V PWREN KW-AV60BTJ,U,A KW-AV60BT E,EE,EU

R1317
KW-AV68BTJW
OPEN
100k
C1356
*7
*7
IC154 Q1542
OPEN
0V
DRC9114Y-X CAR_CABLE QAM1351-001 QAM1352-001
*POWER CODE ASSY

DDX3/DDX4K,R,X,C,M,MM DDX3/DDX4E,Q
DDX4BTK,R,X,C,M,MM DDX4BTE,Q
*6
CN103 CAR_CABLE QAM1353-001 QAM1354-001
QGF0536C3-12W
*18
BT_R 1
R9993
AGND 2
0
BT_L 3 SW5V
To BT UNIT
A9V 4
R9994
*5 AUTO ANTENNA
1
DGND 5
KW-AV60
(FOR BT MODEL)
EP101
BT5V 6 OPEN R9991 NNZ0129-001X KW-AV6*BT KW-AV60
BT3.3V 7
*18 OPEN EXcept_E,EU,EE.Ver KW-AV60BT
(LVA10924-13A) E,EU,EE.Ver
BTRST
BTRST 8 *10 ISO_AMP DDX3/DDX4
2NDMUTE
SWMUTE
PRE_FMUTE
PWIC_MUTE
PARKING
REVERSE
DDX4BT
KW-AV60/6*BT DDX3/DDX4 ART
CN311
DGND 9
BTRX GND
BTRX 10 KW-ADV64BTJ DDX4BT D1921 MBRX130-TP-X NI
BTTX
BTTX 11 IC181 NI NJM2794RB2-X D1922 MBRX130-TP-X NI
BT_MUTE_CTL
BT_MUTE_CTL 12 R1181/R1281/R1381 NI NRSA6AJ-0R0W D3.3V PARK. BK. C1921 NI NI
OPEN
R1182/R1282 NI NRSA6AJ-103W BLK LAMP R1921 4.7k 1/10W NI

R1382 NI NRSA02J-132X
OPEN
C9995
R9995
C1181/C1281 NI NCB31CK-105X ILUM

TEL MUTE
DRA9114E-X
DRA9114E-X
C1182/C1282 NI NCB31CK-105X *20 E-mark
CN104
C1381 NI NCBA1CK-103W KW-AV60 E,EU
Q1504
Q1503
Q1501
*12 FRONT_AV-IN
OPEN
QGF0536C3-14W
C1382 NI QETN1EM-476Z KW-AV60 KW-AV60BT E,EU
R1931
KW-AV60/AV6*BT DDX3/DDX4 KW-AV6*BT
10k
*9
AIN_AL 1
C1383 NI QEKJ1CM-226Z DDX3/DDX4
KW-ADV64BTJ DDX4BT EXcept_E,EU_Ver
TEL
ILL
AIN_AG 2
R1385 NI NRSA6AJ-102W 4.9V 0V 4.9V 0V
Q1943 DDX4BT
DRA9114Y-X
RKS801KF-X
R1161/R1261/R1361 AIN_AR 3
R1948
NRSA6AJ-473W NI R1386 NI NRSA6AJ-222W D902 NI GS1J-LTP-X
22k
D1941
R1162/R1262/R1362 VGND 4 4.9V 4.9V
D1381 NI RKZ4.7B2KG-X
R1602/R1603 NRSA6AJ-103W NI NAVI_AL 5
D1382 NI RKS801KF-X
To SUB UNIT
R1953
R1944
C1602 NCBA1HK-102W NI
MC2836-X
MC2836-X
MC2836-X
27k
22k
NAVI_AG 6
*24 C901
D1504
D1503
D1501
D1931
OPEN
C1603/C1604 QEKJ1CM-226Z NI
R1945
470
(LVA11128-xxA)
NAVI_AR 7
C1167/C1267 NI NCB31CK-105X AV60/6*BT DDX3/DDX4
*9
DRC9114E-X
IC161 TC74HCT4053AFTX NI VGND 8
ADV64BT DDX4BT
DSC5001/R/-X
R1952
VIDEO_M_SW1
4.7k
C1164/C1264/C1364 NCB31CK-105X NI
CN201
AUDIO_SEL
VOL_MUTE0
VOL_MUTE1
VOL_MUTE2
VOL_MUTEB
VOL_MUTEC
PWIC_DC_DET
BUZZER
PWIC_STB
ST_REM
VIDEO_M_SW1 9
Q1961
C901 QEZ0769-278 QEZ0951-398
DSC5001/R/-X
VIDEO_M_SW2
NAF0034-270X
R1184/R1284/R1384 NI NRSA6AJ-0R0W
R1961
VIDEO_M_SW2 10
R1941
10k
R1946
47k
47k
VOUTMUTE
VOUTMUTE 11
C1165/C1265/C1365 NCB31CK-105X NI
Q1944
Q1942
NAVI_TX 12 MC2836-X 3.3V
RT1N141U-X
OPEN
3.3V
NAVI_RX 13 0V
R1503
NAVI_REMO 4.7V 4.7V
VA941
DRC9143Z-X
DRC9143Z-X
Q1951
DSC5001/R/-X
NAVI_REMO 14
*6 Bluetooth 0V R1947 R1942
Q1508
Q1505
Q1502
2.2k
Q1507
R1502 0V
0V 0V 0V
2.2/10
47k 22k
0.1/50
*9
KW-AV60 KW-AV6*BT/ADV64BTJ
R1932
R1933
C1932
R1954
C1963
OPEN
OPEN
47k
OPEN
0V 0V
12k
OPEN
10/25
68k
R1501
C1501
DDX3/DDX4 DDX4BT D1502
C1952
C1943
22/16
C1944
C1163/C1263 NI NCB31CK-105X
CN103 NI QGF0536C3-12W
VDD3.3V
*18 Bluetooth GND

NAVITX
NAVIRX
PWREN
SXI_PON
BTTX
BTRX
BTRST
BT_MUTE_CTL
VIDEO_M_SW1
VIDEO_M_SW2
VOUTMUTE
NAVI_REMO
TU_SDA
TU_SCL
KW-AV6*BT KW-AV60
DDX4BT DDX3/DDX4
KW-ADV64BTJ
R9993 NRSA6AJ-0R0W NRSA6AJ-0R0W NRSA6AJ-0R0W
R9994 NI NI NI LVA11038
*7 SXI/NAVI MAIN PWB
AV_J.Ver AV_EXcept_J/E/JW.Ver
PAMPTH
MEMORY
D3.3V
D5V
DGND
DVD_FL
DACGND
DVD_FR
F_LCH
F_GND
F_RCH
NAVITX
NAVIRX
PWREN
SXI_PON
BTTX
BTRX
BTRST
BT_MUTE_CTL
VIDEO_M_SW1
VIDEO_M_SW2
VOUTMUTE
NAVI_REMO
TU_SDA
TU_SCL
AUDIO_SEL
VOL_MUTE0
VOL_MUTE1
VOL_MUTE2
VOL_MUTEB
VOL_MUTEC
PWIC_DC_DET
BUZZER
PWIC_STB
D3.3V
SW5V
A9V
ILM12V
ST_REM
MUTE_RST
BATT
VDD3.3V
VOLDA
VOLCK
VDD5V
2ND_MUTE
SW_MUTE
PRE_MUTE_F
PWIC_MUTE
TELMUTE
PARK
BKLAMP
EXT
ACC
AGND
ANT
DGND
MGND
DIMMER
STREMO
DDX_K.Ver AV_E/JW.Ver DDX_EXcept_K.Ver

J151 QNZ0907-001 NI NI
F151 NMFZ028-5R0X-J1 NI NI
C1158/C1258 NCB31CK-105X NI NI
C1358 NCJ21CK-106X-R NI NI
C1353 NCB31HK-104X NI NI
R1154/R1254 NRSA02J-101X NI NI
R1352
R1326/R1356/R1359
NRSA02J-470X
NRSA02J-101X
NI
NI
NI
NI
To MAIN UNIT-2 (LVA11038-xxA)
R1357/R1360 NRSA6AJ-0R0W NI NI
Q1541 DRA9114E-X NI NI
Q1542 DRC9114Y-X NI NI
R1317 NRSA6AJ-104W NI NI
R1542 NRSA6AJ-0R0W NI NI LTC044EEB, DRC9144E LTC014EEB, DRC9114E LTC043ZEB, DRC9143Z LTC014YEB, DRC9114Y NOTES
VA151/VA152/VA153 ,RT1N441U ,RT1N141U ,RT1N436U ,RT1N144U

VA154/VA155/VA156 NAF0034-270X NI NI 1. VOLTAGES ARE DC-MEASURED WITH A DIGITAL VOLT METER WITHOUT INPUT SIGNAL
47k 10k 4.7k
CONDITION --- DVD PLAYBACK MODE WITH DVD TEST DISC V-507.
R1325/R1358 NI NI NRSA6AJ-0R0W 10k
( ) FM MODE, AM MODE.
R1110/R1210/R1310 NI NI NRSA6AJ-0R0W 47k
2. UNLESS OTHERWISE SPECIFIED.
IC152 74AHC1G08GW-X NI 74AHC1G08GW-X 47k 10k 47k
ALL RESISTORS ARE 1/16W +5% METAL GLAZE RESISTOR.
IC153 74AHCT1G08GW-X NI 74AHCT1G08GW-X ! Parts are safety assurance parts.
C1354/C1355 NCBA1CK-103W NI NCBA1CK-103W LTA044EEB, DRA9144E LTA014EEB, DRA9114E LTA043ZEB, DRA9143Z LTA014YEB, DRA9114Y ALL CAPACITORS ARE 50V,25V CERAMIC CAPACITOR.
,RT1P441U ,RT1P141U ,RT1P436U ,RT1P144U ALL RESISTANCE VALUES ARE IN OHM. When replacing those parts make
R1327/R1363 NRSA6AJ-104W NI NRSA6AJ-104W
ALL CAPACITANCE VALUES ARE IN uF(P=pF)
R1316/R1314 NRSA6AJ-104W NI NRSA6AJ-104W 47k 10k 4.7k
10k ALL E.CAPACITORS ARE SHOWN IN THE FORM OF CAPACITANCE(uF)/RATED VOLTAGE(V) sure to use the specified one.
R1364/R1315 NRSA6AJ-0R0W NI NRSA6AJ-0R0W
F --- FILM CAPACITOR
R1318 NI NRSA6AJ-0R0W NI 47k
47k 10k 47k
R1319 NI NRSA63J-0R0X NI 3. "NI" OR "OPEN" STANDS FOR NOT MOUNTED PARTS

(No.WA022<Rev.001>)5/32
MAIN UNIT-2 (LVA11038-xxA)
*17
KW-AV60/6*BT DDX3/DDX4
To MAIN UNIT-1 (LVA11038-xxA)
KW-ADV64BTJ DDX4BT *5 AUTO ANTENNA
R810 NI NI KW-AV60/ADV64BT
VIDEO_M_SW1
VIDEO_M_SW2
PWIC_DC_DET
BT_MUTE_CTL
PRE_MUTE_F
KW-AV6*BT KW-AV60
VOL_MUTEC
VOL_MUTEB
PWIC_MUTE
VOL_MUTE0
VOL_MUTE1
VOL_MUTE2
NAVI_REMO
C817 NI NI
VOUTMUTE
AUDIO_SEL
MUTE_RST
2ND_MUTE
PWIC_STB
SW_MUTE
E,EU
TELMUTE
EXcept_E,EU,EE DDX4E,Q
MEMORY
DACGND
SXI_PON
STREMO
VDD3.3V
PAMPTH
ST_REM
DIMMER
BKLAMP
DVD_FR
BUZZER
ILM12V
TU_SDA
DVD_FL
TU_SCL
NAVIRX
PWREN
R811 NI NRSA6AJ-300W
NAVITX
F_GND
VOLDA
VOLCK
F_RCH
VDD5V
BTRST
F_LCH
MGND
KW-AV60BT
DGND
DGND
DDX4BTE,Q
AGND
DDX3/DDX4
SW5V
D3.3V
D3.3V
PARK
BTRX
BTTX
BATT
A9V
ACC
ANT
D5V
EXT
C818 NI NDCA1HJ-2R0W DDX4BT E,EU,EE
R812 NI NI Except_E,Q
C819 NI NI R814 NI NI NRSA02J-0R0X
R815 NRSA02J-0R0X NI NI
VIDEO_M_SW1
VIDEO_M_SW2
PWIC_DC_DET
BT_MUTE_CTL
PRE_MUTE_F
VOL_MUTEC
VOL_MUTEB
TP765
PWIC_MUTE
VOL_MUTE0
VOL_MUTE1
VOL_MUTE2
NAVI_REMO
VOUTMUTE
AUDIO_SEL
MUTE_RST
2ND_MUTE
C802 QEKJ1EM-106Z NI NI
PWIC_STB
MGND
SW_MUTE
DGND
TELMUTE
DACGND
SXI_PON
PAMPTH
DIMMER
BKLAMP
DVD_FR
BUZZER
TP766
TU_SDA
DVD_FL
TU_SCL
ACC
NAVIRX
PWREN
NAVITX
F_GND
F_RCH
BTRST
F_LCH
PARK
BTRX
BTTX
BATT
AGND
CN105
QGF0534F6-50X
MGND 50
MGND 49
MGND 48
TP707
TP708
TP709
TP710
REGULATOR
OPEN
C815
C820
MGND 47
0.01
OPEN
0.5%
10k
M8V 46
ACC5V
VDD5V
M8V 45
A9V_F
ILM_F
SW5V
CD8V
CTL2
CTL1
GND
L801 22 IC801
VCC
ACC
ANT
EXT
A9V
ILM
M8V 44
NQL52EM-220X LV5680P
FAN CONTROL
R801
R802
M5V 43 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
D8011
0V
0V
M5V 42 R923
7.9V
8.5V
4.9V
2.3V
4.9V
5.0V
5.0V
4.9V
1/10W
11.9V
1.25V
1.25V
14.4V
14.4V
CN112
0
R815
D4V 41
0.5%
C824
CRS03-W
R804 R807
*5 0 QGA2001C1-02 M921
R803
5.6k
D4V 40
*5
OPEN OPEN R814 Q921 OPEN TO FAN
To DVD UNIT (LVA11111-03A)

C810 27k
S5V 39 0.5% 2
SW1 OPEN 5.1V 0V
0.001
OPEN
SW1 38 1
R811
OPEN
*17
FAN MOTOR
D40-2248-08/FMU-XS2-21D DAC3 Cr(P)
SW4
37
36
SW4
R800
0 R922
5.1V
QAR0521-001
OPEN
C813
CN401
C818
C811
OPEN
*17
DAC2 Cb(P) 35
DGND 34 OPEN
OPEN
R921
DAC1 Y(P) 33
OPEN
OPEN
VGND 32
OPEN
5.1V
150
150
150
DAC4 CVBS 31
C921
FAN 0V
0.001
1/16
DGND 30
0.5%
0.5%
0.5%
C282
Q922
C260
C272
TP801
C262
29
*13 RGB_SW
1/16
1/16
0V
R263
R262
R283
R282
R273
R272
CPURST 3.3V
NMFZ028-5R0X-J1
10/6.3
*13
*13
OPEN
DRA9114E-X
CPURST 28
*13
S2UDT_ AV_EXcept_J/JW/E.Ver AV_J/JW/E.Ver 0V
F801
Q804
S2UDT 27
U2SDT_ R DDX_EXcept_K.Ver DDX_K.Ver
U2SDT 26
SCLK_ G IC261 NJM2584AM-X NI 3.2V
SCLK 25
!
330
SACK
R808
SACK 24
SCS_ C262/C272/C282 NCB31CK-105X NI Q802
+B_SAFETY
0V
0V
0V
SCS 23
2.9V
2.9V
4.9V
2.9V
2.6V
R264/R265/R266 NRSA6AJ-470W NI DRA9144E-X
UCS 22
UCS_
CP/RGB_SW Q872
ONLY AV__J/E/JW Ver.

16 15 14 13 12 11 10 9 5.0V 4.9V
DGND 21 DRA9114E-X
R267/R268/R269 NI NRSA6AJ-470W Q871
IN1A
GND1
IN2B
V+
CTL
IN2A
GND3
IN3B
47
47
47
20 *13
0V MTM98140-X
R813
R809
& DDX__K Ver.
820
14.4V
DGND 19 IC261
270
22k
R267
R268
R269
NJM2584AM-X
GND2
OUT1
OUT2
OUT3
14.4V
0.33/16
DRC9114E-X
To DVD UNIT (LVA11111-06A)
IN1B
IN3A
D2V 18
*26
OPEN
NC
NC
3.2V 14.4V 14.4V
D2V 17 S D
8
C823 OPEN DVD_FR 1 2 3 4 5 6 7 8 0V 14.4V 14.4V KW-AV60/6*BT DDX3/DDX4
D40-2245-08/FMU-XS2-41D
*13
*13
*13
R871
Q805
F-Rch 16 S D
DDX4BT
7
KW-ADV64BT
R805
0V
0V
0V
C872
DACGND 14.4V 14.4V
2.9V
2.2V
2.1V
1.4V
2.2V
4.5V
DACGND 15 S D
6
0V 0V R873
C963 NI NCB31HK-102X
CN401
DVD_FL B
220/10
4.5V 14.4V
0.1/10
0.1/10
10/25
10/25
DRC9114E-X
F-Lch 14 G D
5
DRC9144E-X
C814
0.1
0.1/10
*17 *17 0V 3.3V 470
A5V 13
Q801
R810 C817 OPEN
R872
10k
3.2V
USBNEN 12
OPEN OPEN 0V
AGND 11
C806
C803
C804
C805
C802
C816
C801
0.5%
4.7k
0V
0.01/16
1/16
NC(R-Lch) 10
Q803
4.9V
*13
*5
R264
C871
CB/B_OUT 47
DGND 9
*13 BATT_DET
DRA9114E-X
R265
4.7k
R874
CR/R_OUT 47 R973
0V
220/16
D971
DRC9144E-X
NC(CENTER) 8
Q875
C812
C808
C807
R806
C809
15k
22/50
*13 R266 4.7V
47/25
LRMUTE Y/G_OUT 47 BATT
Q873
LRMUTE 7
R875
4.7V
10k
0V
SW5V
NC(WOOFER) 6 RKZ6.8B2KG-X
Q972
Q971
10k
0V
USBNEN DGND
1/10W
R975
R971
OPEN
68k
D5V 5
0V D972 R9997
3.4V
DSC5001/R/-X
DSC5001/R/-X
DGND 4 RKZ6.8B2KG-X
4.7V
0.01/16
USB CABLE
RKZ18B2KG-X
1.5k
R961
D-/IPOD_DATA 3 OPEN
C962
0V R9996
DRC9114E-X
0.6V ART QAM1360-001
8.2k
OPEN
C961
1/10W
D+ 2
Q874
D871
L961
R974
R972
0V 0V
47k
R976
VBUS
0V
47k
DGND 1 NQR0682-001X 5 5 1
0V
ART D-
2
USB
2 3 4 4
D+
3 3 3
R812
USBGND
C819
OPEN
OPEN
1 4 2 2 4
*17
*17
SHIELD
TP706
1 1
OPEN
C963
OPEN
OPEN
D962
D961
CN111
OPEN
OPEN
*26
QGA2001C1-05
TELMUTE
BKLAMP
PARK
DIMMER
VOL_MUTEC
VOL_MUTEB
VOL_MUTE2
VOL_MUTE1
R851
R852
CN108
QGF0534F6-12X
CV_OUT
CV_OUT 1 U3.3V DGND
CRS03-W
D821
2.7k
SW5V 2
ART
R776
C705
VOUTSW1 IC821
0.1/10
4.7k
VOUTSW1 3 XC6213B332NG-X
VOUTSW2
L702
R777
VOUTSW2 4
To SUB UNIT
3.3V 0V
DVD_CV 5
VDD3.3V
VOUT GND ! 3.3V OPEN OPEN
2
R8108 C8104
OPEN 4.6V 4.6V
(LVA11128-xxA)
VGND 6 VIN STBY F831
1
YDATA
XDATA
X1
Y0
X0
0.5% 0.5%
VGND 7 R8109 R8110
B
CN202
LRMUTE
USBNEN
SACK
CPURST
SCLK_
U2SDT_
S2UDT_
UCS_
SCS_
SW4
SW1
B 8 NMFZ028-2R0X-J1
G 470 1.2k
G 9
R
R 10
Q821
C8306
STREMO_KEY2
KEY2
KEY1
STREMO_KEY1
STREMO_SW
VGND 11 DRA9114E-X
1/16
14.4V
R8107
2.2k
CSYNC R765 4.7k 3.3V 3.3V
USB_PWR
FAN
PON
C8106
RKZ6.2B2KG-X
NAVI_CSYNC 12
10/25
2SC1623A
R766 4.7k
Q8102
R711 12k
0.33/10
D8106
R8203
R8103
33k
33k
0.5%
0.5%
/5-6/-X
R712 12k R774 47k
R8101
13.1V
2SC1623A/5-6/-X
14.4V
68k
0V
3.3V
3.3V
R790 R797 47k R796
22k
RKS801KF-X
C8101
12.4V
R792 R798 47k 47k 3.3V PON 6 5 4
Q8301
22k
Q822
L8101 22
RKZ6.2B2KG-X
RKZ6.2B2KG-X
RKZ6.2B2KG-X
RKZ6.2B2KG-X
RKZ6.2B2KG-X
R8105
DRC9144E-X
R8301
120
33k
D3
D4
S
NQLC8CM-220X
4.7V
13.1V
OPEN
Q8101
0V
10/25
R8115
TPC6110-X
0.1V
D8301
Q791
5.6
OPEN
C8102
0V
OPEN
0.001
DRC9114E-X
R8111
1k
2SA812A/5-6/-X
C8305
C8103
Q8104
NRB04CJ-102W
0.001
R8204
R8104
R8102
D2
D1
0V
0.5%
2.2k
33k
33k
0.5%
2SA812A/5-6/-X
82k
OPEN
G
470/10
0V
C822
10/6.3
TP775
TP776
100/16
*1 AREA
0.5%
0V
D751
D752
D753
D754
D755
OPEN
1 2 3
0V
R8117
R8308
C821
R8302
47k
*15
*15
*15
*15
*15
Q8103
RA731
C8304
D8101
NRB04CJ-102W
1k
1k
1k
1k
1k
1k
R8106
3.3V
3.3V
C724
12.3V
C8109
C8108
C8107
R7095
R7093
R7092
R7089
R7088
OPEN
220
220
C7088
1k
1k
0.01/16 D8501
RB051L-40-X
*4 F_AUX
R799
470k
C7089 0.01 RKS801KF-X
R701
R703
CN114
C7092 TP761 TP752
0.01 AV60/6*BT DDX3/DDX4 20V
VOUT
*1
*1
QGZ1102J1-20
R7073
R7072
R7066
R7065
GND
VIN
ADV64BT DDX4BT
12.0V
C7093
2.5V
0.1V
1.2V
1.2V
1.7V
1.3V
4.9V
0.01
1k
RA725
0.1/10
GND 1 IC851
Y/G_OUT R757 47k NI 22V 1 2 3
Y/G 2 NJM2835DL1-15X 16 15 14 13 12 11 10 9
R758 NI 47k
TP774
C7095 L8201
OPEN
0.47/10
0V
0.01/16 CRS03-W
14.4V
14.1V
47
0.1/10
68k
BA9743AFV-X
AGND 3
Vref
SCP
+IN2
-IN2
FB2
DTC2
OUT2
Vcc
D8201
12k
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
CB/B_OUT 22V
C8301
3.2V
3.2V
3.2V
1.5V
3.3V
3.3V
3.3V
3.3V
3.3V
1.1V
3.3V
3.3V
2.4V
3.2V
3.2V
3.1V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
IC803
Cb/B 4
*6 Bluetooth
OPEN
DCDC
R702
R704
NQLC8CM-470X
0.01/16
0.01/16
0.01/16
0.01/16
0.01/16
R721
R722
GND 5 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65

*1
OUT1
*1
DTC1
*21 R7202
KW-AV6*BT
GND
+IN1
CR/R_OUT 47k
-IN1
FB1
OPEN
R8306
C8201
C8303
CT
RT
Cr/R 6
XD_SCLK
XD_SIN
XD_SOUT
XD_SCS
XD_UCS
XD_SW4
XD_SW1
TEL_MUTE
STREMO_KEY2
KEY2
KEY1
KEY_INT
STREMO_KEY1
TPKEY2
TPKEY1
VSS
STREMO_SW
VDD
TPY2
TPX2
TPY1
TPX1
USBPWR
FAN_CONT
ANTREM
ACC
PWCONT
EXT_ON
REVERSE_GEAR
PARKING
ILLUMI
ILM_ON
VOL_MUTEC
VOL_MUTEB
VOL_MUTE2
VOL_MUTE1
I2C_SCL
I2C_SDA
KW-AV60
R8201
0.33/25
*21 R7201 47k KW-ADV64BT KDR720E-X
22/16
GND 7
CV_OUT
DDX3/DDX4 DDX4BT -20V
D8205 C8210 R8216 1 2 3 4 5 6 7 8
C7110
C7109
C7108
C7107
C7106
C7104
R8207
0V
R8214
CVBS 8 R7103
470
1.6V
2.5V
1.2V
1.2V
1.7V
1.3V
3.1V
RA722 NI NRB04CJ-102W
15
100 3.3V 3.3V VOL_MUTE0
KDR720E-X
R7064 1k 0.1/50 10
A3.3V 9 103 XD_RESET VOL_MUTE0 64
D8203
C8501
C8502
R727 NI NI 1/10W
To PANEL-B UNIT
3.3V 3.3V VOUTMUTE
10/25
R7105 R7063 1k 4.8V
14V
14V
D3.3V 10 104 OEM VOUTMUTE 63
0V
OPEN R752 NI 47k R8206
2SA812A/5-6/-X
CSYNC 0V 3.3V R7062 1k VOUTSW1 4.3V
CSYNC 11 105 SACK VOUTSW1 62 6 5 4
R753 47k NI
Q8202
R8305
(LVA11042-11A)
0.36V 0V VOUTSW2 820
RTQ035N03-W
OPEN
GND 12 106 AREA2 VOUTSW2 61
S
C777
100/50
1.5V
C8207
*12 0V 0V OPEN
C8213
DDX:3.3k
Q8201
22/50
OPEN
OPEN
GND 13 107 AREA1 VIDEO_M_SW3 60
CN601
R8309
C8307
R1166 1k
VA114
12k
F_LCH PWIC_DC_DET 3.3V 0V VIDEO_M_SW2
R8213
C8205
TH700
390p
F_Lch 14 108 PWIC_DC_DET VIDEO_M_SW2 59 *4
2.2k F_GND VIDEO_M_SW1 R758 OPEN *2 Divx R8303
KDR720E-X
3.3V 0V
10/25
R8202
68k
F_GND 15 109 AN_TEMP_CPU VIDEO_M_SW1 58
D8204
C8208
*4
G
D
D
*12 R1266 R757
AV_EXcept_JW.Ver AV_JW.Ver
OPEN
F_RCH PAMPTH 0V 3.3V 47k 1.5V 1.2k
OPEN
C8203
F_Rch 16 110 AN_TEMP_AMP AUX_IN_EN 57 1 2 3
DDX_Except_k.Ver DDX_K.Ver
CPU
RA724
OPEN
OPEN
DDX:3.3k
RA821
2.2k 22V RA728 PRE_MUTE_F
RA822
10/25
OPEN
0V 0V 0V
R8307
TP750
OPEN
22V 17 111 DOOR_SW PRE_MUTE_F 56
14V
14V
*15
0.0022
OPEN
R749 47k NI
1.5V
C8206
NRB04CJ-102W B5V
OPEN
0V 0V
R8304
C8302
Q717 TP749
0.0027
R7777
A5V 18 112 PM0 B5V 55
C8214
R8215
R750 NI 47k
0V
10k
-20V OPEN 0V 3.3V PWIC_MUTE
2SC1623A
R8212
R8217
TP748
33k
-20V 19 113 PM1 PWIC_MUTE 54 *6
C8209
R8205
OPEN
Q8203
R753
0
SYS_DATA SW_MUTE
C8202
5.6k
0V 0V
/5-6/-X
10
SYSDATA 20
R1167
TP728 114 PMKICK
IC701 SW_MUTE 53 *6
*12 R_ENC1 R7115 2.2k R752 47k
0V 3.3V
S-GND 21 115 R_ENC1 BT_EN 52
OPEN R_ENC2 R7116 2.2k 0V 3.2V PWIC_STB *3 BT_READY
S-GND 22 C1160 *12 116 R_ENC2 PWIC_STB 51 *2
*15 R7117 OPEN 0V R5F3651NDFC 3.3V 2ND_MUTE R750 OPEN
AV60 AV6*BT/ADV64BT R8208 10K C8204 0.0068 R8211
S-GND 23 117 SI AVOUT_MUTE 50 *2
OPEN
R7118 4.7k 3.2V 3.3V
R749 47k DDX4BT/DDX3/DDX4 R8209 4.7k R8210 12k 1k 0.5%
S-GND 24 118 USBNEN DivX_EN 49
R1267 *12 R7119 1k 3.2V 0V R7048 4.7k R740 47k NI B5V 0.5% 0.5%
119 XD_LRMUTE BOARD_TESTMODE 48
OPEN NAVI_REMO 0V 0V
*15 R7047 1k DETACH R741 NI 47k SW_FRQ_SEL
120 W_REMO2 DETACH 47
C1260 *12 1k
R7121 1.6V 3.2V R7046 2.2k APP_RST
5.1V
5.1V
*12 121 5V_SAFETY APP_RESET 46

R781 RA723
*12
OPEN
5 4 REMO_MIX 10k
0V
122 TC_5V_DET SYS_CE 45
0V
NRB04CJ-470W
SYS_CE
APP_CLK
L8002
22
0V 0V
C7121
3.9k *12
TP713
VCC
RA132 123 NC APP_CLK 44

R7122
47
0.01/16
R780
1k
OPEN
1 8 *8 APP_DATA
R7505
0V 0V NQL52EM-220X
124 NC APP_DATA 43
IC751
C7501
2 7 10k 0V 0V SYS_DATA
OPEN 125 TYPE_TOMBO SYS_DATA 42
R778
B5V
GND
3 6
*8
*8
0V 0V
TP741
OPEN
126 NAVI_SXI BT_READY_EN 41
R743
B
100k
OPEN C7128
4 5 0V 0V
1 2 3 127 AVSS DEBUG_SCLK 40
R779 0V 0V
0V
128 ST_REMO_EN VSS 39

BT_MUTE_CTL
3.0V
3.3V
C1360 *12 C7502 SW_freq_SEL
TUNER_SDA
TUNER_SCL
OPEN 0.01/16 *15
AUDIO_SEL
REMOCON
*7
OPEN
USB5V D5V
ST_REMO
BUS_SCK
R726 R747
SXI_PON
NAVI_RX
C7126
BL_PWM
BUS_INT
NAVI_TX
BUS_SO
BUZZER
APP_CE
PWREN
0.047/16
BUS_SI
CNVSS
0.01/16
RESET
BTRST
OPEN
AVCC
VREF
VDD1
BTRX
VDD1
BYTE
BATT
BTTX
*8 OPEN
OPEN
OPEN
47k USB_PWR
VSS
*11
XT2
XT1
R729
NC
NC
NC
NC
R748
C7503 NQLC8CM-220X
X2
X1
1K
R724
*15
*8 R746
OPEN 12k NQLC8CM-220X
*8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 L8001
OPEN
R7506 R7502 C8005
R8001
DGND 47k
R8033
R8011
L8031 22 C8035
OPEN
100
R8031
OPEN
1k
R728
R725
R723
1k
47k
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
C721
TP736
0V
1k
*3
R8000
-
-
3.3V
3.3V
3.0V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.2V
3.2V
3.3V
3.3V
R740 0.1/16 0.1/16

OPEN *8 22
0.5%
C720
OPEN
R7503 0
470/10
100k
330/6.3
10/6.3
10/6.3
10/6.3
OPEN
*7
IC831 IC802
*11
100
1k
1k
*3
OPEN
10
RKZ6.2B2KG-X
BD9673EFJ-X
RA721
R741 BD9673EFJ-X
RB051L-40-X
RB051L-40-X
100
R8005
OPEN
R8037
D8031
D8001
10
R7040
DRC9114E-X
47k 47k
R8041
D8022
R8034
R7038
100
100k
22k
RKZ6.2B2KG-X
C8038
C8039
C8040
C8009
C8010
C8008
D8021
NRB04CJ-102W
NRB04CJ-101W
R7011
R7012
OPEN
14.4V
DRC9114E-X
14.4V 5.0V
R7008
C719
5.0V
TP703 Lx VCC Lx VCC
Q8022
8
TU_SDA 9.7V 0V 9.7V
R7025
0V
R8007
0.5%
TP704
4.7V
GND BST GND BST
Q8021
2
7
R8039
RA722
RA729
*12
*7
TU_SCL 3.2V 1.1V 4.4V
0
1.1V
OPEN
TP705
4.7V
VC EN VC EN
6
100
1k
0V
*6
*8 SW_FRQ_SEL 1.0V 1.4V 1.0V 1.4V

FB SYNC FB SYNC
5
R7504 0 R707
0V
OPEN
GND
0.5%
GND
1000p
C8037
R8008
C8006
0.5%
6800p
R8038
C8036
24k
6800p
1000p
0V
47k
10/25
47/25
10/25
47/25
24k
R734
R735
4.7k
4.7k
9
C8041
TP730
0V
OPEN
R8022
C8011
10k
10k
10k
10k
R8042
R8032
R8009
R8010
OPEN
C8007
10k
R8036
R8021
R8030
10k
R8006
STREMO SW
10K
CN115
*8 DIRECT ST REMO
C8034
C8033
C8004
C8003
APP_CE *11
QGZ1102J1-20
5V_SAFETY
R939 *11 R937

SYS_CE BU3.3V
SYSCE 1 KW-AV60/6*BT DDX3/DDX4
APPDATA 2
APP_DATA
KW-ADV64BT DDX4BT 1k 100K
3.2V
3.2V
0V
APP_CE
R9998
R9999
APPCE 3
R7502 NRSA6AJ-101W NRSA6AJ-101W
0
APP_CLK 6 5 4
LVA11038
APP_CLK 4
S2
R7503 NRSA6AJ-0R0W NI R7024 *11 *1 AREA
D1
G2
SDATA 47k
1M
22k
SDATA 5 *6
IC931
R7504 NRSA6AJ-0R0W NI J/K JW/R E/E EE/Q U,A,UT,UF/M EU/M2 _/X _/C _/_ _/J
BT_MUTE_CTL
APP_RST R727 OPEN
MAIN PWB
APPRST 6 RT3J33M-X
AUDIO_SEL
SCLCLK R7505 NI NRSA6AJ-912W R701 NI 12k 12k 12k 12k 12k 12k 12k 12k 12k
SXI_PON
BUZZER
NAVIRX
NAVITX
PWREN
SCLCLK 7
R709
R708
BTRST
R7506 NI NRSA6AJ-104W R702 12k 1.5k 3.3k 6.2k 9.1k 15k 43k 91k NI
G1
R7130 24k
BTRX
BATT
BTTX
D2
DGND
S1
REMOCON 8
*8
100 1 2 3 KW-AV60/6*BT KW-AV70 DDX4 DDX6/719 DDX6

GND 9 *11 R947
KW-ADV64BT /AV7*BT - - - - - /4BT /6BT
0V
R708 NRSA6AJ-105W NRSA6AJ-123W 200mm
To PANEL-B UNIT
3.2V
270 3.2V
RESET
RESETSW 10 R940
OPEN
X0 C7503 NI NDCA1HJ-331W R703 NI 12k 12k 12k 12k 12k 12k 12k 12k 12k
*11 R945
0.5%
X0 11 1k
C7501 NI NCBA1CK-103W R704 12K 1.5k 3.3k 6.2k 9.1k 15k 24k 43k 91k NI
MUTE_RST
(LVA11042-11A)
100K
*11
0.5%
R938
R_ENC2
R_ENC2 12 Q931
R946
270
IC751 NI 74AHCT1G08GW-X
*11
STREMO
X1 R7014
X1 13 DRC9114Y-X *11 LEARNING_REMO
*11
CN602 R_ENC1 150k VDD3.3V 0V
AV_U/EU/A/UF Ver.
0.5%
240
0.5%
EEPROM
R_ENC1 14 *11
0.5%
R934
220
RKS801KF-X
RKS801KF-X
OTHERS
R700
D7301 3.2V
4.7K
R933
Y0 R931
DDX_M/M2/X/C Ver.
4.7k
0.5%
Y0 15 RKS801KF-X 47
R7302
OPEN
C7303
R7303
R718
*11 D936
D935
22k
R715
R935
47k
KEY1 3.3V 1/10W

IC931 RT3J33M-X NI
R936
*11
*11
240
KEY1 16 R7304
*11
0V
DRA9114E-X
*11
XDATA 10M OPEN 3.3V 3
Q731
Q931 DRC9114Y-X NI
*11
XDATA 17
KEY2 2
CN119 QGA2501C1-03 NI
0
10k *11
R714
KEY2 18
3.3V
3.3V
3.3V
R932
220/10
OPEN
0V
1.5k
YDATA 1
0V
0.001
1.5k
R942
R941
47
C931/C932 NCBA1CK-103W NI
OPEN
YDATA 19
R7301 1/10W F1000
*11
*11
DETACH 8 7 6 5 RESET
QAX0967-001Z
PATTERN_FUSE R931/R932 NRSA02J-470X NI

QAX0401-001
OPEN
OPEN
DETACH/SI 20
CN119
C7006
15.6672MHz
VDD
WPIN
SCL
SDA
22k
32.768kHz
100
R933/R934 NRSA6AD-472W NI
D934
D933
*11 R943
OPEN
3.3V
QGA2501C1-03
680
680
R1EX24016ASAA-X
OPEN
3.2V
C722
S-GND 21
C723
C713
R944
33k
0.01/16
0.01/16
RESET R935/R936 NRSA02D-241X NI
*11
S-GND 22 4 3
33k
X702
X701
*11
IC721
XC6120N242NG-X
R937/R938 NRSA6AJ-104W NI
GND
R7017
S-GND 23
VIN
VOUT
A0
A1
A2
OPEN
0.01/16
IC731
S-GND 24
C7301
C932
C931
R6222
C7302
1 2 3 4
1/16
0.01/16
C6222
0.01/16
C6221
R6221
VA751
VA752
VA753
VA754
VA755
*11
D932
VA939
*11
TP711
0V
0V
0V
0V
VA931
D931
VSS
VA932
RKZ18B2KG-X
NAF0034-270X
NAF0034-270X
NAF0034-270X
NAF0034-270X
NAF0034-270X
*15
*15
*15
*15
*15
OPEN
NC
RKZ18B2KG-X
STREMO_SW
*11
C7201
22p
12p
C714
C715
C717
C718
22p
10p
1 2 R945/R946 NRSA02D-271X NI
*11
STREMO_KEY1
D931/D932 RKZ18B2KG-X NI
0V
0V
TP932
TP931
STREMO_KEY2
D935/D936 RKS801KF-X NI
R723 NRSA6AJ-123W NI
TP740
DGND DGND R724 NI NRSA6AJ-123W
APP_RST
SDATA
SCLCLK
*15 DETACH_SI *12 FRONT_AV-IN / R.ENC *7 SXI/NAVI

KW-AV60/6*BT DDX3/DDX4 KW-AV60/6*BT DDX3/DDX4 AV_J.Ver
KW-ADV64BT DDX4BT KW-ADV64BT DDX4BT DDX_K.Ver OTHER Ver. TP714
AV_JW/E.Ver TP717
LTC044EEB, DRC9144E LTC014EEB, DRC9114E LTC043ZEB, DRC9143Z LTC014YEB, DRC9114Y
Q717 NI DRA9143Z-X R7115 NRSA6AJ-222W NRSA6AJ-222W R7011 NRSA6AJ-101W NI NI ,RT1N441U ,RT1N141U ,RT1N436U ,RT1N144U NOTES
TP721
R7117 NI NRSA6AJ-0R0W R7116 NRSA6AJ-222W NRSA6AJ-222W R725 NRSA6AJ-473W NRSA6AJ-223W NI 47k 10k 4.7k
TP719 1. VOLTAGES ARE DC-MEASURED WITH A DIGITAL VOLT METER WITHOUT INPUT SIGNAL
R748 NI NRSA6AJ-104W R7012 NRSA6AJ-102W NI R726 NI NRSA6AJ-223W NRSA6AJ-473W 10k
R7047 NRSA6AJ-102W NI R1166/R1266 NRSA63J-222X NRSA63J-332X 47k

CONDITION --- DVD PLAYBACK MODE WITH DVD TEST DISC V-507.
8
CN110
R747 NRSA6AJ-473W NI 47k 10k 47k 2. UNLESS OTHERWISE SPECIFIED.
SDATA
SCLCLK
APPRST
DGND
VDD
RESET
CNVSS
SCLK
QGA1002F1-08X
R780/R781 NRSA6AJ-103W NRSA6AJ-103W *21 External AMP noise ALL RESISTORS ARE 1/16W +5% METAL GLAZE RESISTOR.
D751/D752/D753 RKZ6.2B2KG-X NI
D754/D755 R1167/R1267 NI NI LTA044EEB, DRA9144E LTA014EEB, DRA9114E LTA043ZEB, DRA9143Z LTA014YEB, DRA9114Y
KW-AV60/6*BT DDX3/DDX4 ,RT1P441U
ALL CAPACITORS ARE 50V,25V CERAMIC CAPACITOR.
DDX4BT ,RT1P141U ,RT1P436U ,RT1P144U
VA751/VA752 C1160/C1260 NI NI KW-ADV64BT ALL RESISTANCE VALUES ARE IN OHM.
NAF0034-270X NI
VA753/VA754 RA132 NRB04CJ-392W NI R7201 NRSA6AJ-473W NRSA6AJ-473W 47k 10k 4.7k ALL CAPACITANCE VALUES ARE IN uF(P=pF)
VA755 C1360 NCB31CK-473X NI R7202 NRSA6AJ-473W NRSA6AJ-473W
10k
ALL E.CAPACITORS ARE SHOWN IN THE FORM OF CAPACITANCE(uF)/RATED VOLTAGE(V)
47k F --- FILM CAPACITOR
47k 10k 47k
3. "NI" OR "OPEN" STANDS FOR NOT MOUNTED PARTS
! Parts are safety assurance parts.
When replacing those parts make
sure to use the specified one.

(No.WA022<Rev.001>)6/32
SUB UNIT (LVA11128-xxA)
MEMO
SUB PWB
*1 BT MIC *2 NAVI IN
VIDEO CAMERA REAR
MIC IN OUT IN VIDEO IN V IN CAMERA V OUT
MIC
NAVI IN
J2000
SH_GND
QGA2001C1-07
GREEN
CSYNC
QGA2001C1-06
REMO
AGND
VGND
BLUE
NC()
RED
CN261
Rch
Lch
QNN0875-001 CN262
RX
TX
J201
6
6
1
7
PATTERN_FUSE
PATTERN_FUSE
NAF0034-270X
NAF0034-270X
To BT UNIT (FOR BT MODEL)
CN231
PATTERN_FUSE
F1003
(LVA10924-13A) 2
*1 BT MIC CN341 1
DGND
C2102
1/10W
R2101
OPEN
100
OPEN
OPEN
1/16
VA231
C2101
VA232
C237
C236
0.1/10
0.1/10
KW-AV60*/70* Serise KW-AV60BT* Serise C2302
OPEN
OPEN
C239
C249
C245
DDX3*/DDX4*/DDX6*/ DDX4*BT* DDX6*BT*
VA249
100P
VA233
F1005
NAF0034-270X
F1004
KW-AV70BT* Serise
VA201
DDX7* Serise Serise
*3
OPEN
1/16 1/10W
C2201
R238 C2202 R2201
J2000 OPEN QNS0283-001 QNS0283-001
OPEN
OPEN
R2001
R2002
0
*3 1/16 100
R243
R219
75
1/10
0
CN231 OPEN QGA2001F1-02 QGA2001F1-02 R239 R295 100
GND
GND 0 1/10W
VA231 OPEN OPEN OPEN
*3
R251 100
R201
75
VA232 OPEN OPEN OPEN 1/10W
R231
75
R252
100
R218
*3
0
C236 OPEN OPEN 0.1/10 GND
1/10W
1
C237 OPEN OPEN 0.1/10
MC2850-X
OPEN
OPEN
VA220
VA210
VA251
VA252
VA295
C294
0.047/50
D296
C296
R296
C293
470
*2 NAVI IN
2
DDX3*/DDX4*/ VA220,VA210,VA251,VA252,VA295: NAF0034-270X
C203
KW-AV60*/70* J Ver.
0.1/10
DDX3*/DDX4*/DDX6*/ KW-AV60*/70* DDX6*/DDX7* DDX6*W Serise
6dB AMP VIDEO IN AMP 4.7/16
Except J Ver. C201 C241 R241
DDX7* K Ver. Except K Ver.
0.1/10 470
C242 R242
CN261 OPEN QGA2001C1-07 QGA2001C1-07 QGA2001C1-07
470
NJM2505AF-X 4.7/16
4.9V
1.7V
1.7V
CN262 OPEN QGA2001C1-06 QGA2001C1-06 QGA2001C1-06
0V
0V
NJM2561F1-X IC241
VA210
VA220 OPEN NAF0034-270X NAF0034-270X NAF0034-270X IC201 6 5 4 5 4
GND
VGND
VIN
V+
IN
VA251
VA252 OPEN NAF0034-270X NAF0034-270X NAF0034-270X
R288 R278 R268 R298

VA295 OPEN OPEN NAF0034-270X NAF0034-270X
GND
PS
OUT
SAG
OUT
VCC
V.OUT
75 75 75 OPEN
VA261
VA271 VA281 OPEN NAF0034-270X NAF0034-270X NAF0034-270X 1 2 3 1 2 3
(3.0V)
C285 C275 C265 C295
0V
0V
NAF0034-270X
0.9V
4.9V
VA291 OPEN NAF0034-270X NAF0034-270X NAF0034-270X C202
1.5V
1.5V
R202
OPEN OPEN OPEN OPEN
D296 OPEN MC2850-X MC2850-X MC2850-X
OPEN 470/10 VA281 VA271 VA261 VA291
1/16
*3
C2101 R246
C2201 OPEN OPEN OPEN OPEN
100k
C2102
1
4
3
OPEN 1/16 1/16 1/16 NAF0034-270X NAF0034-270X NAF0034-270X NAF0034-270X
C2202
OPEN
VA241
R245
C243
C246
150k
C244
0.1/10
C2302 OPEN 1/16 1/16 1/16
10/25
8
OPEN
RA241 *3
C200
NRB04CJ-392W
*3 *3
C281
C271
C261
0.1/16
0.1/16
0.1/16
R247 R248 0
L200
100
C296 OPEN 0.047/50 0.047/50 0.047/50

VIDEO OUT SW PANEL OUT SW
R281
R271
R261
R291
100
100
100
10
C261
C271 C281 OPEN 0.1/16 0.1/16 0.1/16
*3
C265
OPEN
*3
OPEN
C214
OPEN OPEN OPEN OPEN
C215
R213
C234
C235
R233
C275 C285
1M
0.1/10
0.1/10
1M
1/16
C233
R2001 OPEN OPEN OPEN OPEN
*3
*3
C213
1/16
R2101
R2201 OPEN 100 1/10W 100 1/10W 100 1/10W
NJM2535V-X NJM2535V-X
0.7V
4.9V
1.5V
0.7V
4.9V
1.7V
0V
R251
0V
R252 OPEN 100 1/10W 100 1/10W 100 1/10W IC211 IC231
VIN1 VIN 8 7 6 5 SW1 SW2 OUT 8 7 6 5 VIN1 VIN
R261
R271 R281 OPEN 100 100 100
GND
Vout
+B
VIN3
GND
Vout
+B
VIN3
VIN2 DVD L L VIN1 VIN2 RCAM
R268 VIN3 iPod H L VIN2 VIN3 iPod
R278 R288 OPEN 75 75 75
(DDX) (DDX)
L/H H VIN3
VIN1
VIN2
VIN1
VIN2
SW1
SW2
SW1
SW2
To PANEL-B UNIT
R291 OPEN 10 10 10
(LVA11042-11A)
1 2 3 4 VOUTMUTE 1 2 3 4
R295 OPEN OPEN 100 1/10W 100 1/10W
0V
0V
0V
CN654 6-7pin
1.5V
2.2V
1.5V
2.3V
(3.1V)
0V
R296 OPEN 470 470 470
VOUTSW2 VIDEO_M_SW2
C212
1/16
*3 INPUT VOUTSW1 VIDEO_M_SW1
C232
1/16
C211 C231
FRONT VIDEO IN 1/16 1/16

OPEN
R214
R215
TP213
TP212
TP211
TP231
TP232
DDX3*/DDX4* 150
Serise CN222
QGA2501C1-02
*3 INPUT CV
2
GND
1
DDX3* Serise DDX6* Serise
KW-AV60* Serise DDX4* Serise DDX7* Serise
KW-AV70* Serise
R225
75
CN221
CN221 OPEN OPEN QGA2501C1-04
QGA2501C1-04
47K
C222
R222
100P
VIDEO_M_SW1
VIDEO_M_SW2
VOUTMUTE
VOUTSW1
VOUTSW2
4
CN222 OPEN QGA2501C1-02 OPEN R223
3
OPEN
2
R221
47K
C221
100P
1
VA221 OPEN OPEN NAF0034-270X
VA222 OPEN OPEN NAF0034-270X VIDEO/AUDIO IN

OPEN
OPEN
VA223 OPEN OPEN NAF0034-270X DDX6*/DDX7*

1000P
Serise
VA225
VA223
VA221
VA222
VA225 OPEN OPEN NAF0034-270X

C225
C226
OPEN
C223
C224
C221 OPEN OPEN 100P/50

C222
C223 OPEN OPEN 1000P/50
CSYNC
C224 OPEN OPEN OPEN
NAF0034-270X
NAF0034-270X
NAF0034-270X
NAF0034-270X
C225 OPEN OPEN OPEN

SUB PWB
C226
R221
OPEN
OPEN
OPEN
OPEN
OPEN
47K
LVA11128A-01A
10
11
12
13
14
10
11
12
R222
1
9
CN202
AIN_AL
AIN_AG
AIN_AR
VG
NAVI_AL
NAVI_AG
NAVI_AR
VG
VIDEO_M_SW1
VIDEO_M_SW2
VOUTMUTE
NAVI_TX
NAVI_RX
NAVI_REMO
CV_OUT
SW5V
VOUTSW1
VOUTSW2
DVD_CV
VGND
VGND
VGND
NAVI_CSYNC
CN201
R223 OPEN OPEN OPEN
QGF0534F6-14X QGF0534F6-12X
R225 OPEN OPEN 75
NOTES
1. VOLTAGES ARE DC-MEASURED WITH A DIGITAL VOLT METER WITHOUT INPUT SIGNAL
VA241 NAF0034-270X OPEN OPEN CONDITION --- DVD PLAYBACK MODE WITH DVD TEST DISC V-501 Tr3(COLOR BAR).
( ) WARKING ON,
To MAIN UNIT-1 (LVA11038-xxA) To MAIN UNIT-2 (LVA11038-xxA)

RA241 NRB04CJ-392W NRB04CJ-392W NRB04CJ-392W
2. UNLESS OTHERWISE SPECIFIED.
R213 1M OPEN OPEN ALL RESISTORS ARE 1/16W +5% METAL GLAZE RESISTOR. CN104 CN108
ALL CAPACITORS ARE CERAMIC CAPACITOR, NON RATED VOLEAGE IS 50V.
R218 OPEN 0 0
ALL RESISTANCE VALUES ARE IN OHM.
R219 OPEN 0 0 ALL CAPACITANCE VALUES ARE IN uF(P=pF)
ALL E.CAPACITORS ARE SHOWN IN THE FORM OF CAPACITANCE(uF)/RATED VOLTAGE(V)
R233 1M OPEN OPEN
F --- FILM CAPACITOR
R238 0 OPEN OPEN
3. OPEN STANDS FOR NOT MOUNTED PARTS
R239 0 OPEN OPEN
R247 100 OPEN OPEN
R248 OPEN 0 0
C213 OPEN 1/16 1/16
C233 OPEN 1/16 1/16

(No.WA022<Rev.001>)7/32
PANEL-A UNIT (LVA11039-13A)
LVA11039-11A~15A
PANEL-A PWB
VDD SCLCLK SDATA APPRST

TP405 TP402 TP401 TP403
RESET
*2 C4062 0.1/10
*2
0V 3.2V
IC403
XC6120N272NG-X
2
0V 2.9V
1
C4061
APPRST
OPEN R4061
OPEN
AVDD_VGL
VGH
LED_B
VCOM_PWM
LED_R
APPCE
SCLCLK
SDATA
APPCE GND
100
TP408 TP406
1k
1k
NSFCS
TP409
R4066
R4064
100
100
OPEN
100
100
*2
R4059
R4062
R4060
1k
1k
SFHOLD
SFCK
NSFCS
SFDO1
SFDI1
SFDO0
SFDI0
WP
R4070
R4069
R4068
R4067
R4065
R4063
NMI
100
100
R4077
TP407
SERIAL FLASH
C4097
C4095
C4094
0.1/10
0.1/10
C4107
C4106
C4103
0.1/10
0.1/10
0.1/10
0.1/10
0.01
0.1/10 0.1/10
68
R4058
IC441
C4069
C4066
R4079
R4078
C4067
C4085
C4074
R4091
R4087
R4083
EN25Q64-104HIP
C4075
68
68
68
68
0.1/10
10k
1/6.3
1/6.3
C4056
10/6.3 C4408
NSFCS 3.2V 3.2V
C4057
CS VCC *1 CSYNC LEVEL SHIFTER
8
10/6.3
0.1/10
3.2V
1.2V
1.2V
3.2V
3.2V
2.6V
3.2V
3.2V
3.2V
3.2V
3.2V
3.2V
3.2V
3.2V
3.2V
3.2V
3.2V
1.5V
1.5V
1.2V
3.2V
3.2V
3.2V
3.2V
3.2V
2.9V
R4402 3.2V 3.2V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0V
0.1/10 SFDI0 SFHOLD MODEL DDX3 Serise
C4055 KW-AV70 Serise
LCD1G2
DO HOLD
7
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78

Service Manual: Monitor With DVD Receiver

Uploaded by

Copyright:

Available Formats

Service Manual: Monitor With DVD Receiver

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Service Manual: Monitor With DVD Receiver

Uploaded by

Copyright:

Available Formats

SERVICE MANUAL

MONITOR WITH DVD RECEIVER

Microphone * Car cable (PRK) *

Escutcheon * Escutcheon * Mounting hardware assy * Lever *

* It uses it by some models. Refer to the parts list.

B53-0932-00 COPYRIGHT © 2012 JVC KENWOOD Corporation No.WA022<Rev.001>

Usable Sen- AM 28 dBµ

1.6 Handling the traverse unit (optical pickup)

1.7 Attention when traverse unit is decomposed

3.CAUTION : Visible and/or invisible laser radiation when

Chassis Stamp Print on Right Side of Mechanism

TP79 Voltage supply

Fig.3 3.2.2 Removing the Front end board (See Fig.7)

Slide cam spring

* Can be input from any source or condition.

4.2.2.1 INITIALIZE ALL

<While executing INITIALIZE>

4.2.2.5 ERROR/DIAG DATA

4.2.2.6 RDS TEST MODE

After the clearing process is complete, switch to the following

[BACK] key: Returns to the SS mode or service mode

Display the following if the BT dongle cannot be correctly detect-

[BACK] key: Returns to the SS mode or service mode

4.2.3 DVD CHECK MODE display specifications

If the inserted BT dongle is inserted while the above NG screen

4.2.2.9 FIRM UPDATE MODE

4.2.2.10 STEERING REMOTE DEVELOPMENT

• DVD CHECK MODE is cleared by power OFF (Clear by ACC

(1) [SYSCOM] key

(3) [Bluetooth] key

• Output beep sound at regular intervals while Update is in

<Update Complete Display (Image)>

[BACK] key: invalid

• If update information (Update file in the ROOT folder)

4.4.2.3 S/N WRITE & RGB(SXM) TERMINAL CHK

4.4.2.6 BT DONGLE CHECK MODE

4.4.2.7 S-METER LEVEL CALIBRATION

4.4.2.8 TOUCH PANEL CALIBRATION

4.4.2.9 VER/CHECK SUM

4.6.1 Touch adjustment (TOUCH ADJUST)

4.7 OPENNING CUSTOMIZE screen

(1) [Openning Customize] key

This service manual does not describe TROUBLESHOOTING.

VME1 ONLY USED

No.WA022 created date:2012-02-15

EXPLODED VIEW (UNIT) <200A>

209 E30-8231-08 CAR CABLE USB 1 E1,M1,M2,X1,R1,Q1,K0

RC1 205 230

211 212 213

750 734 254

No.WA022 created date:2012-02-15

EXPLODED VIEW (PANEL) <200B>

N N09-6876-08 SPECIAL SCREW 4

- B64-4983-08 INST BOOK ITA 1 E2,E1

No.WA022 created date:2012-02-15

EXPLODED VIEW (DVD:D40-2248-08/FMU-XS2-21D) <150A>

10 G01-4713-08 DAMPER SPRING A 1

No.WA022 created date:2012-02-15

EXPLODED VIEW (DVD:D40-2245-08/FMU-XS2-41D) <150B>