OF HYDR

R A
E
R

U
U

L
CT

IC
N U FA

MOTORS
POWER to be the Best!
MA

DRILL MOTOR GUIDE

Rineer Hydraulics - Your best choice for high quality, powerful drill motors.
Our Drill motors are a proven choice for most types of drilling applications. The patented
vane crossing vane design is well suited for the torque and speed ranges required for today’s
drilling demands.

Applications include directional drills,

water well, quarry, and blast hole rigs.

37, 57, and 125 Series are 4500 psi

continuous duty

15 Series Male Pin Thru hole shafts for water or air.

No gears, chains, or sprockets. 37 / 57 Series API Box

Heavy duty thrust bearings.

Constant torque throughout speed

range.

API threads on output shaft.

Exclusive sub-lock system on 37, 57,

37 / 57 Series 4-Port API Box and 125 models.

4-Port models have 2-speed capability. 125 Series API Box

37 Series 4-Port XLBH API Box

125 Series 4-Port API Box
Made in U.S.A. PUBLICATION DS5001001 5/08
 YOUR BEST CHOICE FOR DRILL MOTORS!
15 Series Male Pin Drill Motor 1561500 DRILL MOTOR
3000 psi 7,000
3,000 HRS L10 BASIC BEARING LIFE T1: 3800, HM89400

6,500

6,000

5,500

5,000

4,500

AXIAL FORCE
4,000

(lbf)
3,500

3,000

2,500

2,000

1,500

1,000

500

0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
SPEED (rpm)

The 15 Series Drill Motor is suitable for light duty drilling and can achieve up to 150 HP in the maximum
displacement. When using the motor above 80% of maximum HP, please consult a Rineer Application
Engineer. Maximum speed of up to 1500 rpm is permissible, but is goverened by the chosen displace-
ment. Eight displacements are available, ranging from 6 to 15 CID. The envelope size remains constant
regardless of displacement. The CA21-1 drill rod thread assures easy connection and the hybrid SAE C
mounting flange allows for easy mounting.

Model Code: M015-61-1S-XXX-53-T1-DB-084 (XXX = displacement choice)

7.29 5.62
1.00 5.98 3.23 2.19
6.81
2.48 .94
CENTER 3.41
.51 LINE 5.70
.62 .72 CASE SQUARE
DRAIN

5.69 5.500
4.27 5.495
17°

5.00 17°
4.51
5.91

1/2 DIA. 1.688 CENTER

SAE 1-1/4ӯ CODE 61 THRU 9/16" DIA., LINE
1.0 HOLE 4 HOLES CASE
4-BOLT FLANGE DRILL ROD THREAD DRAIN
NEAR AND FAR SIDE 1.50 TAPER THREAD CONNECTION
3/8" O-RING BOSS WRENCH 6 THREADS PER INCH
1/2" NPT CASE DRAIN 1-1/2 INCH PER FOOT
MALE THREAD FLATS
(2) PLACES TAPER - BEGINNING AT
1-23/64 MAJOR DIA. (CA 21-1)

-2-
 37 D2 Series Drill Motor YOUR BEST CHOICE FOR DRILL MOTORS!
4500 psi continuous - 5000 intermittent

The 37 Series Drill Motor is suitable for medium duty

drilling and can achieve up to 230 HP in the maximum
displacement. When using the motor above 80% of
maximum HP, please consult a Rineer Application
Engineer. Maximum speed of up to 1000 rpm is permis-
sible, determined by the displacement choice. Six
displacements are available, ranging from 12 to 37 CID.
The envelope size remains constant regardless of
displacement. The shaft features a 2-3/8 API I.F. box
thread for easy connection and has a 1.25” diameter
thru hole. Easy assembly is made possible by the
hybrid SAE D mounting flange. An exclusive sub-lock
collar system is supplied with the motor (see page 10).
D2/D4 Drill Motor
3,000 HRS L 10 BASIC BEARING LIFE T4: 78000, B3216
25,000
THRUST - PULL/PUSH (lbf)

22,500

20,000

17,500

15,000

12,500

10,000
0 100 200 300 400 500 600 700 800 900 1000
SPEED (rpm)

Model Code: M037-D2-2S-XXX-53-T4-TVD-000 (XXX = displacement choice)

16.58
8.50
3.63
STD. 1/2" O-RING .75
1.50 BOSS CASE DRAIN 4.81
(2) PLACES

Ø8.63 Ø7.000
6.998
7.91
Ø3.437

6.36
Ø8.13

2-3/8 API
1.50 INTERNAL
FLUSH 6.36
2.15 1-1/4 Ø
7.25 THRU 7.91
SAE 1-1/4"Ø CODE 62 HOLE
4-BOLT FLANGE PORT 2.95 .812 DIA. (4) HOLES
1-1/2 MALE NPT (2) PLACES
R.H. THREADS

-3-
 57 D2 Series Drill Motor YOUR BEST CHOICE FOR DRILL MOTORS!
4500 psi continuous - 5000 intermittent
The 57 Series Drill Motor is suitable for medium duty
drilling and can achieve up to 285 HP in the maximum
displacement. When using the motor above 80% of
maximum HP, please consult a Rineer Application
Engineer. Maximum speed of up to 600 rpm is permis-
sible in both of the two displacements, 48 and 55.5
CID. The envelope size remains constant for both. The
shaft features a 2-3/8 API I.F. box thread for easy
connection and has a 1.125” diameter thru hole. Easy
assembly is made possible by the hybrid SAE D
mounting flange. An exclusive sub-lock collar system is
supplied with the motor (see page 10).

3,000 HRS L 10 BASIC BEARING LIFE D2/D4 Drill Motor

T4: 78000, B3216
25,000

22,500
AXIAL FORCE (lbf)

20,000

17,500

15,000

12,500

10,000
0 50 100 150 200 250 300 350 400 450 500
SPEED (rpm)

Model Code: M057-D2-2S-XXX-53-T4-TVD-000 (XXX = displacement choice)

9.50 2.95 4.00
1.50 4.81
.75

Ø7.000
6.998

Ø8.63
7.91

Ø3.437
6.36

Ø8.13

2-3/8 API
STD. 1/2" O-RING 1.50 INTERNAL
1-1/2 NPT FLUSH 6.36
BOSS CASE DRAIN
MALE (2) PLACES 1-1/4 Ø 7.91
THREAD THRU HOLE
8.25 .812 DIA. (4) HOLES
SAE 1-1/4"Ø CODE 62
4-BOLT FLANGE PORT
(2) PLACES

-4-
 57 / 37 D4 Series Drill Motors YOUR BEST CHOICE FOR DRILL MOTORS!
4500 psi continuous - 5000 intermittent

3,000 HRS L 10 BASIC BEARING LIFE D2/D4 Drill Motor

T4: 78000, B3216
25,000

22,500
AXIAL FORCE (lbf)

20,000

17,500

15,000

12,500

10,000
0 50 100 150 200 250 300 350 400 450 500
SPEED (rpm)
The 57 / 37 D4 Series API I.F. Drill Motors present a unique opportunity for increased power and 2-speeding capa-
bility. These Drill Motors utilize two rotating groups (packages), on a common shaft. The packages can be indepen-
dently plumbed for high torque low speed, or high speed low torque output, depending on job requirements. This
would be accomplished by utilizing an external 2-speed circuit (see page 10 for more information). The front rotating
group may have either displacement of the 57 series, 48 or 55.5 c.i.d., while the rear rotating group may have any
displacement of the 37 series, available in six displacements ranging from 12 c.i.d. to 37 c.i.d. In addition, both
packages may be selected from the 37 series displacements, giving opportunity for 2:1 ratios. These combinations
allow for total displacements of from 24 c.i.d. to 93 c.i.d. (see chart on back cover). Total displacement and shift ratio
requirements govern the package choices. The motor model code callout is 37D4 if two 37 series packages are
specified or begins with 57D4 if a 57 series package is required. The largest package will be assembled closest to
the shaft output. The 57 series packages are one inch longer than the 37 series, which would be reflected in overall
motor length. Displacement choice in the model code will be the combined total of both packages. The D4 series
can achieve up to 480 HP in the maximum displacement. When using the motor above 80% of maximum HP, please
consult a Rineer Application Engineer. Envelope size remains constant regardless of displacement choices. The
common 2-3/8 API I.F. box drill thread assures easy connection, and unrestricted mounting allows for easy assem-
bly. An exclusive sub-lock collar system is supplied with the motor (see page 10).
Model Code: M057-D4-2S-XXX-53-T4-TVD-000 (XXX = displacement choice)

23.64*

15.20 2.95 4.00 1-1/8 Ø

THRU
1.50 4.81 HOLE
.75

Ø7.000
Ø8.63 6.998

7.91

Ø3.437
6.36

Ø8.13

1.50 STD. 1/2"O-RING 6.36

BOSS CASE DRAIN
8.35 (2) PLACES 7.91
13.95
1-1/2 MALE .812 DIA. (4) HOLES
SAE 1-1/4"Ø CODE 62
NPT THREAD
4-BOLT FLANGE PORT 2-3/8 API I.F.
(4) PLACES *57/37 SHOWN - 37/37 WILL BE 1” SHORTER
-5-
 37 D4 Series 4-Port XLBH Drill Motor YOUR BEST CHOICE FOR DRILL MOTORS!
4500 psi continuous - 5000 intermittent
The 37D4 Series 4-Port XLBH Drill Motor is suitable for heavy duty drilling and can
achieve up to 385 HP in the maximum displacement. When using the motor above
80% of maximum HP, please consult a Rineer Application Engineer. Maximum
speed of up to 1000 rpm is permissible, determined by the displacement
choice. Six displacements are available, ranging from 12 to 37 CID. The
envelope size remains constant regardless of displacement. The 37 D4
motor utilizes two rotating groups (packages), on a common shaft.
These packages can be independently plumbed for high torque low
speed, or high speed low torque output, depending on job require-
ments. This would be accomplished by utilizing an external 2-
speed circuit. The packages are selected from the six displace-
ments listed in the charts on page 12. A 37D4 motor as small as
24 CID, (2) 12 cid packages, or as large as 74 CID, (2) 37 cid
packages can be built. Total displacement and shift ratio require-
ments govern the package choices. The motor model code will reflect
the combined total of the package displacements. When combining differ-
ent displacement packages, the larger displacement will be assembled next to the front mounting
flange. The common 2-7/8 API I.F. box drill thread assures easy connection. An exclusive sub-lock
system is supplied with the motor (see page 10).
D4 XLBH Drill Motor
3,000 HRS L 10 BASIC BEARING LIFE T5: HH914400, B3228
40,000

35,000
AXIAL FORCE (lbf)

30,000

25,000

20,000

15,000
0 100 200 300 400 500 600 700 800 900 1000
SPEED (rpm)
Model Code: M037-D4-2S-XXX-53-T5-TVD-000 (XXX = displacement choice)
26.58
2-7/8 API
14.20 1.00 INTERNAL FLUSH
4.38 29°
1.75 .75 15°
4.81
B1
.75
32°
Ø11.00
1.00
Ø8.13 Ø8.63
Ø9.000
8.998
B2
A2 A1

Ø7.30

STD. 1/2" 0-RING Ø4.200

BOSS CASE DRAIN 4.195
1-1/4Ø (2) PLACES 65T 16/32DP 30°PA
1-1/2 THRU HOLE 1.50 1.50 EXT. INVOLUTE SPLINE 3/8 O-RING BOSS
NPT FLAT ROOT SIDE FIT CASE DRAIN (2)
7.35 .50
17/32 DIA. (8) HOLES
12.95 6.26 SP. AS SHOWN ON A
10" B.C.
SAE 1-1/4"Ø CODE 62
4-BOLT FLANGE PORT
(4) PLACES
-6-
 125 H2 Series Drill Motor YOUR BEST CHOICE FOR DRILL MOTORS!
4500 psi continuous - 5000 intermittent

The 125 H2 Series API I.F. Drill Motor is suitable for heavy duty
drilling and can achieve up to 390 HP in the maximum displace-
ment. When using the motor above 80% of maximum HP,
please consult a Rineer Application Engineer. Maximum speed
of up to 300 RPM is permissible regardless of displacement.
The 125 series is available in six displacements ranging from
60 to 125 CID with envelope size remaining constant regardless
of displacement. The common 2-7/8 API I.F. drill rod thread at
the output end assures easy connection, and unrestricted
mounting allows for easy assembly. An exclusive sub-lock collar
system is supplied with the motor (see page 10).

3,000 HRS L 10 BASIC BEARING LIFE T3 :JHM522600, 32219X

30,000

25,000
AXIAL FORCE (lbf)

20,000

15,000

10,000

5,000

0
0 50 100 150 200 250 300
SPEED (rpm)

Model Code: M125-H2-2S-XXX-53-T3-TVD-000 (XXX = displacement choice)

21.52
19.23
1.28 12.25 5.70
2-7/8 API I.F.
10.38 BOX THREAD
1.00
1/2 O-RING BOSS 2.63
CASE DRAIN 6.50
1/2 O-RING BOSS
CASE DRAIN (2) PLACES

CASE
1.50 DRAIN

WRENCH 10.75
FLATS 14.00
CL
65°

3.000
4.125

2" NPT 9.000 65°

8.500 FEMALE 8.995
8.495 LH THREADS CL CASE
DRAIN

SUBLOCK SPLINE
65T, 16/32P 30°
2-1/8"Ø PRESSURE ANGLE
6X Ø.781 THRU,
THRU HOLE 0N A 11.75 B.C.
SAE 1-1/2"Ø CODE 62
4-BOLT FLANGE PORT
(2) PLACES
-7-
 125 H4 Series 4-Port Drill Motor YOUR BEST CHOICE FOR DRILL MOTORS!
4500 psi continuous - 5000 intermittent
The 125 Series Drill Motor is suitable for heavy
duty drilling and can achieve up to 780 HP in the
maximum displacement. When using the motor
above 80% of maximum HP, please consult a
Rineer Application Engineer. Maximum speed of
up to 300 rpm is permissible, determined by the
displacement choice. Six displacements are
available, ranging from 60 to 125 CID. The
envelope size remains constant regardless of
displacement. The shaft features a 2-7/8 API I.F.
box thread for easy connection and has a 2”
diameter thru hole. Easy assembly is made
possible by the unrestricted mounting. An exclu-
sive sub-lock collar system is supplied with the
motor (see page 10).

3,000 HRS L 10 BASIC BEARING LIFE T3 :JHM522600, 32219X

30,000

25,000
AXIAL FORCE (lbf)

20,000

15,000

10,000

5,000

0
0 50 100 150 200 250 300
SPEED (rpm)

Model Code: M125-H4-2S-XXX-53-T3-TVD-000 (XXX = displacement choice)

29.26
26.98
20.00 5.70
18.13
1/2 O-RING BOSS SEE SUBLOCK
1.28 10.38 PAGE 10
CASE DRAIN
2.63
1/2 O-RING BOSS 1.00 6.50
1.50 CASE DRAIN
(3) PLACES
4.34
B1

8.500 9.000 CASE

Ø8.495 10.75 Ø8.995 C
L DRAIN
65°
3.375 B2 A2 A1
4.125
4.124
65°
3.00
WRENCH C
L CASE
FLATS DRAIN

14.00
2-7/8 API I.F.
2" NPT L.H.
THREAD .781 DRILL x
FEMALE THRU, (6) PLACES
SAE 1-1/2"Ø CODE 62 0N A 11.75 B.C.
4-BOLT FLANGE PORT 2" DIA. THRU HOLE
(4) PLACES

-8-
 Drill Motor Applications YOUR BEST CHOICE FOR DRILL MOTORS!

OF HYDR
R A
E
R

U
U

L
CT

IC
N U FA

MOTORS
MA
R

Rineer Hydraulics has over 35

years experience designing
and manufacturing hydraulic
motors for a variety of drill
applications. Unlike most other
hydraulic manufacturers, we
are dedicated solely to the
production of hydraulic motors,
and to the applications they
serve.

The advanced design of the Rineer Rotating Element lends itself to a wide variety of drill applications. Drill
heads have become a natural extension of the product line due to through-hole capability of the shaft. The
through-hole shaft lends itself to air, mud, and other media during drilling for greater flexibility of operation.
Rineer drillheads are currently in service on underground mining, water well, blast hole, and horizontal
directional drills. All 37, 57, and 125 series drill motors are now high pressure rated (4500 psi) for even
more power. Call us to discuss your application needs and put our experience to use.

Useful Formulas: Maintainance/Operating Imperatives

A premium grade hydraulic oil containing high quality rust,

hp x 5252 tq x rpm oxidation and foam inhibitor, along with anti-wear additives should
Torque = HPshaft = be used. Viscosity should be maintained between 100 and 200
rpm 5252 SSU at operating temperature. Fluid temperature should not
exceed 180oF. Filtration shall be a minimum of 25 micron.
Intermittent conditions to be less than 10% per minute.
cid x psi gpm x psi
Torque = HPhyd = The customer is responsible for the final selection of Rineer’s
75.4 1714 product(s) in order to assure that all performance and safety
requirements of the application are met. In addition, the customer
is responsible for all testing to assure that Rineer’s product(s)
hp x 5252 cid x rpm meets the life and performance requirements of the application
RPM = GPM = under normal operating conditions.
torque 231
tq x 75.4 Visit our website at www.rineer.com
CID =
1 HP = 746 watts or 2547 btu’s/hr psi Limited Warranty Policy
1 bar = 14.5 psi
1 in3 = 16.39 cc Rineer Hydraulics, Inc. warrants that, at the time of shipment to
Purchaser, our product will be free of defects in the material and
mph = rpm x dia/336 workmanship. The above warranty is LIMITED to defective
rpm = 336 x mph/dia products returned by Purchaser to Rineer Hydraulics, Inc., freight
prepaid within four hundred and fifty-five (455) days from date of
shipment, or one (1) year from date of first use, whichever expires
hp = horsepower tq = torque (ft-lbf) first. We will repair or replace any product or part thereof which is
proved to be defective in workmanship or material. There is no
cid = cubic inch displacement dia = diameter (inches) other warranty, expressed or implied, and in no event shall Rineer
Hydraulics, Inc. be liable for consequential or special damages.
psi = pounds per square inch Dismantling the product, operation of the product beyond the
published capabilities or for purposes other than that for which the
gpm = gallons per minute product was designed, shall void this warranty.

-9-
 Drill Motor - Two Speed Information YOUR BEST CHOICE FOR DRILL MOTORS!

Two Speed Operations

Our 4-ported models can be used as two speed motors when external valving circuitry is added. Choose your package
displacements based on maximum torque required. Unload one package and the remaining package provides a lesser
torque value, but with higher speed capability. Two equal packages will provide a 2:1 ratio at the shift. Two unequal
displacements will provide different shift ratios depending on the package choices. For example; 125 CID + 60 CID = 185
CID in full displacement. Subject to which package is unloaded, a ratio of either 3.08:1 or 1.48:1 is attained. You may have
2 or 3 speeds depending on your drilling needs and your circuitry.

Open and Closed Loop Systems

Either motor can be switched out of the work mode via external valving. Be sure to connect the 2 main motor ports, (A1 &
B1, or A2 & B2) through that valving, to the low pressure side to ensure oil circulation through the unloaded package. If
both speeds are needed in both directions, the use of shuttle valves will allow the unloaded motor to remain connected to
the low pressure side. For open loop circuits, a minimum pressure of 15 psi should be provided at the ports of the
unloaded motor. Care should be taken to size valves properly for their respective flow in the high speed mode. Full system
pressure is allowed on working motors during 2 speed operation. The use of cross port reliefs is highly recommended,
and should be placed close by the motor assembly. This will guard the system against pressure spikes during normal
operation.

Series/Parallel
Series/Parallel circuitry can only be used when both motor packages are the same displacement. This will provide a 2:1
speed ratio.

Drill Motor - Exclusive Sub-Lock Collar System

INTERNAL INVOLUTE 3.00 65T, 16/32 PITCH 30o PA 3.00
SPLINE - 54T, 16/32P INTERNAL INVOLUTE SPLINE
30 DEG. CLASS 4 .30 1.00
FLAT ROOT SIDE FIT
FLAT ROOT SIDE FIT 1.00 (SPECIAL CLASS)

3.483 4.00
3.313 4.732
3.318 4.728
3.395 4.00
3.390 REF.

4.140

SUB LOCK COLLAR - 37 / 57 Series SUB-LOCK COLLAR - 125 Series

3.00
1.00
SUB-LOCK The Sub-Lock Collar is a shaft saving device that allows
COLLAR for secure attachment of the motor shaft to the drill string.
The spline of the sub-lock is fitted to the mating spline on
the shaft and then tack welded to the drill string pipe. This
avoids any welding directly onto the shaft. Make up
threads completely before welding. If a replacement is
necessary, or if the motor seal should need replacing, the
sub-lock can be removed or replaced and the more
expensive shaft is left undamaged. The sub-lock can be
ground and re-welded as often as necessary. A sub-lock is
included with the drill motor.
TYPICAL SUB-LOCK SYSTEM ASSEMBLY

- 10 -
Technical Information - All Series

VANE CROSSING VANE HORSEPOWER LIMITATION

The Rineer patented vane crossing vane design produces Calculated maximum horsepower in each series is achieved
much higher volumetric and mechanical efficiencies than is from the largest displacement and will be reduced per given
possible with a standard vane type design. This design smaller displacement. When using the Drill Motor above 80%
provides a sealing vane between cavities to improve of maximum horsepower per displacement, consult a Rineer
mechanical and volumetric efficiencies. Application Engineer.
Maximum Calculated Horsepower (with largest displacement):
STARTING AND STALL TORQUE 15 Series 150 HP
The Rineer motor produces torque curves which are virtually 37 Series 230 HP
flat, with starting and stall torque equal to approximately 57 Series 285 HP
90-94% of theoretical torque. 125 Series 390 HP
125 Series 4-Port 780 HP
MORE POWER STROKES PER REVOLUTION
The 15, 37, and 57 Series have four stator cavities and 10 FILTRATON
rotor vanes. Each rotor vane works in each stator cavity 25 micron minimum.
once per revolution, which results in 40 power strokes per
revolution. FLUID
The 125 Series has six stator cavities and 16 rotor vanes. We suggest premium grade fluids containing high quality rust,
Each rotor vane works in each stator cavity once per oxidation and foam inhibitors, along with anti-wear additives.
revolution, which results in 96 power strokes per revolution. For best performance, viscosity should be maintained between
This helps produce higher mechanical efficiency and flatter 100 and 200 SUS at operating temperature. Fluid temperature
torque curves. should not exceed 180O F. Elevated fluid temperature will
adversely affect seal life while accelerating oxidation and fluid
4-PORT MOTOR CONFIGURATION breakdown. Fire resistant fluids may be used with certain
4-Ported motors have displacements normally ranging from limitations. Contact Rineer for additional information.
24 in3 to 74 in3 in the 37 series to 120 in3 to 250 in3 in the
125 series and are comprised of two rotor stator packages CASE DRAIN
separated by a mid-inlet housing. This allows the packages The Drill Motor Series motor is designed for external case
to function individually or in parallel. Any of the standard drain. Depending on series, two or three case drain ports are
displacement packages may be combined to satisfy total supplied; use the port at the highest elevation. We recommend
displacement requirements. In addition, the 57 series (48 case drain pressure of 35 PSI or less when using the standard
and 55.5 in3) may be combined with any 37 series package seals.
in a 4-port configuration (e.g. 26 in3 + 55.5 in3 = 82 in3)
CASE DRAIN CIRCULATION
BEARING LOADING Fluid should be circulated through the case when a
The bearings in all Drill Series can accept thrust load per the temperature differential exists between the motor and the
thrust capacity charts. Some radial loading is also system in excess of 50O F. Should this occur, contact a Rineer
permissible. Consult with a Rineer Application Engineer for Application Engineer.
optional bearing configurations.
MOUNTING
SEALS The mounting position is unrestricted. The shafts, pilots, and
Viton compound spring loaded lip seal type seals are mounting faces should be within .002 TIR.
supplied as standard on the Rineer Drill series motors.
These seals have proven to be superior for higher INTERMITTENT CONDITIONS
temperatures on the shaft associated with thru hole air. Intermittent conditions are to be less than 10% of every minute.

CASE DRAIN AND CROSS PORT LEAKAGE MODEL CODE EXAMPLE

The combined case drain and cross port leakage of a Drill M125-H2-2S-125-53-T3-TVD-000
Motor is approximately 1 to 1-1/2 GPM per 1,000 PSI per
package. This will vary with the oil viscosity. M125 = Motor Series
H2 = High Pressure 2-port
ROTATION 2S = Rotating Group Designation
The Drill Series Motors rotate equally well in either direction 125 = Displacement choice
and smoothly throughout their entire pressure and speed 53 = Drill motor shaft
range. Looking into the end of the shaft, rotation is clockwise T3 = Bearing package
when oil is supplied to the ports nearest the shaft output end. TVD = Seal type and O-ring
000 = Special number (if assigned)

-11-
 DRILL MOTOR SPECIFICATIONS
Displacement Pressure Speed * Torque @ 3,000 psi
(207 bar)
(in3/rev) (cm3/rev) continuous intermittent continuous intermittent continuous
(psi) (bar) (psi) (bar) (rpm) (rpm) (lbf-ft) (N-m)
15 Series Male Pin M015-61-1S-XXX-53-T1-DB-084 wt. = 60 lbs. REF. Pg. 2
6 98 3000 207 3500 241 2000 2600 183 248
7 114 1900 2600 230 311
8 131 1800 2600 274 371
9.5 155 1700 2300 317 429
10.5 172 1600 2300 352 477
11.5 188 1600 2300 420 569
13 213 1500 2000 430 583
15 246 1500 2000 529 717

Displacement Pressure Speed * Torque @4,500 psi

(310 bar)
(in3/rev) (cm3/rev) continuous intermittent continuous intermittent continuous
(psi) (bar) (psi) (bar) (rpm) (rpm) (lbf-ft) (N-m)
37 D2 Series M037-D2-2S-XXX-53-T4-TVD wt. = 128 lbs. REF. Pg. 3
57 D2 Series M057-D2-2S-XXX-53-T4-TVD wt. = 143 lbs. REF. Pg. 4
12 196 4500 310 5000 345 1000 1200 608 824
16 262 1000 1200 829 1124
20 328 1000 1200 1093 1481
26 426 800 1000 1399 1896
32 524 700 950 1735 2352
37 606 600 800 2017 2734
48 786 4500 310 5000 345 500 600 2553 3461
55.5 909 500 600 3016 4089
37/57 D4 Series M057-D4-2S-XXX-53-T4-TVD wt. = 205 lbs. REF. Pg. 5

40 655 4500 310 5000 345 1000 1200 2186 2963

52 852 800 1000 2798 3793
64 1049 700 950 3470 4704
74 1212 600 800 4034 5469
48 + 20=68 1114 500 600 3646 4943
48 + 26=74 1212 500 600 3952 5358
48 + 32=80 1311 500 600 4288 5813
55.5+32=87 1426 500 600 4751 6441
55.5+37=92 1508 500 600 5033 6823

37 D4 XLBH Series M037-D4-2S-XXX-53-T5-TVD wt. = 273 lbs. REF. Pg. 6

24 393 4500 310 5000 345 500 600 1216 1648
32 524 1658 2247
40 655 2186 2963
52 852 2798 3793
64 1049 3470 4704
74 1212 4034 5469

125 H2 Series M125-H2-2S-XXX-53-T3-TVD wt. = 300 lbs. REF. Pg. 7

60 983 4500 310 5000 345 300 350 3230 4379
68 1114 3633 4925
82 1344 4459 6045
98 1606 5946 8061
113 1852 6168 8362
125 2048 6857 9296
125 H4 Series M125-H4-2S-XXX-53-T3-TVD wt. = 380 lbs. REF. Pg. 8
120 1966 4500 310 5000 345 300 350 6460 8758
136 2228 7266 9851
164 2687 8918 12091
196 3212 11892 16123
226 3703 12336 16725
250 4097 13714 18593

* Torque values are average and are based on maximum speeds at 102 SUS (21 cSt)
331 Breesport San Antonio, Texas 78216
210-341-6333 Fax: 210-341-1231 e-mail: sales@rineer.com