Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 444 views

    14J Drawing Marking Scheme

    Uploaded by

    ACLIN
    The document provides instructions for multiple drawing assignments: 1. Draw three views of a step-down pulley with specified details and dimensions. 2. Construct geometric shapes meeting given criteria: an isosceles triangle with a perimeter of 135mm and altitude of 55mm, and a triangle with perimeter 170mm and sides in a 7:3:5 ratio. 3. Draw the elevation and plan of a right cone frustrum with specifications for the true shape of one face. 4. Produce a front and end elevation of a jaw support with indicated dimensions in first angle projection.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    14J Drawing Marking Scheme

    Uploaded by

    ACLIN
    444 views5 pages
    The document provides instructions for multiple drawing assignments: 1. Draw three views of a step-down pulley with specified details and dimensions. 2. Construct geometric shapes meeting given criteria: an isosceles triangle with a perimeter of 135mm and altitude of 55mm, and a triangle with perimeter 170mm and sides in a 7:3:5 ratio. 3. Draw the elevation and plan of a right cone frustrum with specifications for the true shape of one face. 4. Produce a front and end elevation of a jaw support with indicated dimensions in first angle projection.

    Original Title

    14J DRAWING MARKING SCHEME.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for multiple drawing assignments: 1. Draw three views of a step-down pulley with specified details and dimensions. 2. Construct geometric shapes meeting given criteria: an isosceles triangle with a perimeter of 135mm and altitude of 55mm, and a triangle with perimeter 170mm and sides in a 7:3:5 ratio. 3. Draw the elevation and plan of a right cone frustrum with specifications for the true shape of one face. 4. Produce a front and end elevation of a jaw support with indicated dimensions in first angle projection.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    444 views5 pages

    14J Drawing Marking Scheme

    Uploaded by

    ACLIN
    The document provides instructions for multiple drawing assignments: 1. Draw three views of a step-down pulley with specified details and dimensions. 2. Construct geometric shapes meeting given criteria: an isosceles triangle with a perimeter of 135mm and altitude of 55mm, and a triangle with perimeter 170mm and sides in a 7:3:5 ratio. 3. Draw the elevation and plan of a right cone frustrum with specifications for the true shape of one face. 4. Produce a front and end elevation of a jaw support with indicated dimensions in first angle projection.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 5

    14J DRAWING MARKING SCHEME

    1 SECTION A

    1 Parts of a step down- down pulley as shown in figure Fig 8.

    Draw, full size, the following views of the step-down pulley fully assembled.

    (a) A sectional front elevation on the plane XX;


    (b) An end elevation when viewed in the direction of arrow A

    (c) A plan projected from (a) above looking in the direction of arrow D

    Print the title; size of letter to be 8mm


    Print in the angle of projection you have used; Size of letter to be 6mm
    Print in the scale; Size of letter to be 4mm
    No dimensions are required on your drawing
    (1) Radii B= 12mm
    (2) Radii of fillets= 6mm
    (3) Use your own judgment to determine the size of any dimensions not given on the drawing
    (4) No hidden details are to be shown 40 Marks
    Marks distribution

    (i) Full scale 10 Marks


    (ii) A sectional front elevation 8 Marks
    (iii) End elevation 7 Marks
    (iv) Plan 7 Marks
    (v) Title Block 4 Marks
    (vi) Lining 2 Marks
    (vii) Accuracy 2 Marks
    (viii)

    SECTION B

    2 (a) Construct an Isosceles triangle that has a perimeter of 135mm and an altitude of 55mm
    10 Marks

    Procedure

    - Draw a line AB equal to half the perimeter


    - From erect a perpendicular and make BC equal to the altitude
    - Join AC and bisect it to cut AB in D
    - Produce DB so that BE=BD
    - CDE is the required triangle

    (b) Construct a triangle with perimeter of 170mm and sides in the ratio 7:3:5

    10 Marks

    Procedure

    - Draw the line AB equal in length to the perimeter


    - Divide AB into the required ratio (7:3:5)
    - With center C and radius CA draw an arc
    - With center D and radius DB draw an arc to intersect the first arc in E

    (b) Construct a triangle with perimeter of 170mm and sides in the ratio 7:3:5

    10 Marks

    3 The following figure is the frustrum of a right cone. Draw this elevation and a plan. Draw the true
    shape of the face AB 20 Marks
    Marks distribution

    (i) Elevation 4 Marks


    (ii) Plan 6 Marks
    (iii) True shape 6 Marks
    (iv) Lining 3 Marks
    (v) Accuracy 3 Marks

    4 Figure 4 shows a jaw support. Draw all size in first angle projection the following views

    (a) A front elevation in the direction of arrow A


    (b) An end elevation in the direction of arrow B

    Insert four major dimensions

    20 Marks
    Marks distribution

    (i) Full size 6 Marks


    (ii) Front elevation 5 Marks
    (iii) End elevation 5 Marks
    (iv) Dimension 2 Marks
    (v) Accuracy 2 Marks

    You might also like