Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 178 views

    Tin Bronze C90300 PDF

    Uploaded by

    Deepak Kumar
    The document provides information on two copper alloy materials: C87600 Copper Silicon and C90300 Tin Bronze. It lists the typical chemical composition ranges and mechanical properties of each alloy, as well as their common applications. C87600 Copper Silicon is used in architecture, electrical, and industrial applications. It has good machinability. C90300 Tin Bronze is used in construction equipment, fasteners, industrial parts, and plumbing. It has moderate machinability. Both alloys can be joined and fabricated through various techniques.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tin Bronze C90300 PDF

    Uploaded by

    Deepak Kumar
    178 views1 page
    The document provides information on two copper alloy materials: C87600 Copper Silicon and C90300 Tin Bronze. It lists the typical chemical composition ranges and mechanical properties of each alloy, as well as their common applications. C87600 Copper Silicon is used in architecture, electrical, and industrial applications. It has good machinability. C90300 Tin Bronze is used in construction equipment, fasteners, industrial parts, and plumbing. It has moderate machinability. Both alloys can be joined and fabricated through various techniques.

    Original Title

    Tin Bronze C90300.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information on two copper alloy materials: C87600 Copper Silicon and C90300 Tin Bronze. It lists the typical chemical composition ranges and mechanical properties of each alloy, as well as their common applications. C87600 Copper Silicon is used in architecture, electrical, and industrial applications. It has good machinability. C90300 Tin Bronze is used in construction equipment, fasteners, industrial parts, and plumbing. It has moderate machinability. Both alloys can be joined and fabricated through various techniques.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    178 views1 page

    Tin Bronze C90300 PDF

    Uploaded by

    Deepak Kumar
    The document provides information on two copper alloy materials: C87600 Copper Silicon and C90300 Tin Bronze. It lists the typical chemical composition ranges and mechanical properties of each alloy, as well as their common applications. C87600 Copper Silicon is used in architecture, electrical, and industrial applications. It has good machinability. C90300 Tin Bronze is used in construction equipment, fasteners, industrial parts, and plumbing. It has moderate machinability. Both alloys can be joined and fabricated through various techniques.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    BRASS & BRONZE ALLOYS

    C87600 Copper Silicon

    CHEMICAL COMPOSITION (%max., unless shown as range or min.) TYPICAL USES

    Cu Fe Pb Mn Si Zn Architecture: Artistry Components

    Min./Max. 88.0 min .20 .09 .25 3.5-5.5 4.0-7.0 Electrical: Electrical Components

    Nominal 89.0 4.5 5.5 Industria: Valve Stems, Valve Bodies, Bearings,
    Engineering Applications
    Note: Cu + Sum of Named Elements, 99.5% min.

    APPLICABLE SPECIFICATIONS FABRICATION PROPERTIES

    Product Specification Joining Technique Suitability


    Sand ASTM B584, B763 Machinability Rating 40

    MECHANICAL PROPERTIES (measured at room temperature, 68° F (20° C) As Sand Cast

    YIELD YIELD YIELD


    IZOD
    SECTION COLD TENSILE STRENGTH STRENGTH STRENGTH ROCKWELL VICKENS BRINELL SHEAR FATIGUE
    TEMPER TYP/ MIN TEMP EL IMPACT
    SIZE WORK STRENGTH (0.5% EXT. (0.2% OFF- (0.05% HARDNESS HARD. HARD. STRENGTH STRENGTH*
    STRENGTH
    UNDER LOAD) SET) OFFSET)

    in. % F ksi ksi ksi ksi % B C F 30T 500 3000 ksi ksi ft-lb

    mm. C MPa MPa MPa MPa MPa MPa J

    M01 0.0 0 TYP 68 66 32 20 76 110 135 0.0

    0.0 20 455 221 20 76 110 135 0.0

    C90300 Tin Bronze

    CHEMICAL COMPOSITION (%max., unless shown as range or min.) TYPICAL USES

    Cu(1) Al Sb Fe Pb Ni(2) P(3) Si S Sn Zn Building: Heavy Construction Equipment

    Min./Max. 86.0-89.0 .005 .20 .20 .30 1.0 .05 .005 .05 7.5-9.0 3.0-5.0 Fasteners: Swivel

    Nominal 87.5 8.3 4.0 Industrial: Pump Impellers, Piston Rings, Valve Bodies, Valves,
    Gears, Bushings, Bearings, Pump Bodies, Gear Blanks
    Note: Cu + Sum of Named Elements, 99.5% min. Plumbing: Steam Fittings

    APPLICABLE SPECIFICATIONS FABRICATION PROPERTIES

    Product Specification Joining Technique Suitability


    Sand ASTM B763, B584 Machinability Rating 30
    SAE J461, J462

    MECHANICAL PROPERTIES (measured at room temperature, 68° F (20° C) As Sand Cast

    YIELD YIELD YIELD


    IZOD
    SECTION COLD TENSILE STRENGTH STRENGTH STRENGTH ROCKWELL VICKENS BRINELL SHEAR FATIGUE
    TEMPER TYP/ MIN TEMP EL IMPACT
    SIZE WORK STRENGTH (0.5% EXT. (0.2% OFF- (0.05% HARDNESS HARD. HARD. STRENGTH STRENGTH*
    STRENGTH
    UNDER LOAD) SET) OFFSET)

    in. % F ksi ksi ksi ksi % B C F 30T 500 3000 ksi ksi ft-lb

    mm. C MPa MPa MPa MPa MPa MPa J

    M01 0.0 0 TYP 68 45 21 30 70 0.0

    0.0 20 310 145 30 70 0.0

    You might also like