The document provides design details for a base plate including:
1. Given parameters such as concrete strength, steel yield strength, loads, and dimensions.
2. Calculations to determine the required base plate size, length, width, thickness, and bearing stress based on the allowable bearing stress.
3. Selection of base plate dimensions satisfying the design requirements.
4. Calculation of required bolt length based on allowable tensile load and required hook length.
5. Selection of bolt length satisfying the design.
The document provides design details for a base plate including:
1. Given parameters such as concrete strength, steel yield strength, loads, and dimensions.
2. Calculations to determine the required base plate size, length, width, thickness, and bearing stress based on the allowable bearing stress.
3. Selection of base plate dimensions satisfying the design requirements.
4. Calculation of required bolt length based on allowable tensile load and required hook length.
5. Selection of bolt length satisfying the design.
The document provides design details for a base plate including:
1. Given parameters such as concrete strength, steel yield strength, loads, and dimensions.
2. Calculations to determine the required base plate size, length, width, thickness, and bearing stress based on the allowable bearing stress.
3. Selection of base plate dimensions satisfying the design requirements.
4. Calculation of required bolt length based on allowable tensile load and required hook length.
5. Selection of bolt length satisfying the design.
The document provides design details for a base plate including:
1. Given parameters such as concrete strength, steel yield strength, loads, and dimensions.
2. Calculations to determine the required base plate size, length, width, thickness, and bearing stress based on the allowable bearing stress.
3. Selection of base plate dimensions satisfying the design requirements.
4. Calculation of required bolt length based on allowable tensile load and required hook length.
5. Selection of bolt length satisfying the design.
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
You are on page 1/ 5
GIVEN DATA
Compressive Strength of Concrete f'c = 3.00 N/sq-mm
Yield Strength of Steel fy = 36.00 N/sq-mm Area of Base Plate A1 = 1 sq-mm Area of Supporting Pedestal A2 = 4 sq-mm A2/A1 = 4 Axial Load on Base Plate Pu = 60 N Moment Mx Mx = 480 N-mm Moment My My = 200 N-mm Max Moment M= 480 N-mm Depth of Column d= 8 mm Width of flange bf = mm
DESIGN
1 Allowable Bearing Stress Fp = 2.10 N/sq-mm
Max Moment M= 480.00 N-mm
3 Assume Base Plate Length N= 14.00 mm
Assume Base Plate Width A= 14.00 mm Effecitve Eccentricity e= 8.00 mm Greater than half width Dist of Anchor bolt from Plate edge 1.50 mm Thus N' = 12.50 mm 5.50 4 Average Bearing stress f' = 183.75 N/sq-mm A= 5.10 mm Checked OK
5 T= 15.01 N Checked OK
6 Critical Section is located at 3.20 mm
for unit width Mpl = 4.01 n half width GIVEN DATA Compressive Strength of Concrete f'c = 3.00 N/sq-mm Yield Strength of Steel fy = 36.00 N/sq-mm Area of Base Plate A1 = sq-mm Area of Supporting Pedestal A2 = sq-mm Axial Load on Base Plate Pu = 88 N Moment Mx Mx = 309 N-mm Moment My My = 700 N-mm Max Moment M= 700 N-mm Δ= mm Depth of Column d = 11.1 mm Width of flange bf = 10.34 mm
DESIGN
1 The allowable bearing stress Fp = 2.10 N/sq-mm
2 Area of Bearing Plate Required A1 = 41.90 sq-mm
3 Δ = 1.13 mm Required Length of Base Plate N N = 7.60 mm Provide Length of Base Plate N N = 8.00 mm Require Width of Base Plate Required B B = 5.2381 mm Provide Weidth of Base Plate B N = 5.00 mm
4 Actual Bearing Stress fp = 2.20 mm
5 Larger Value 'm' or 'n' m= -1.27 mm
n= -1.64 mm
6 Thickness of Base Plate Required tp tp = -0.63 mm
Provide thickness of Base Plate tp = -1.00 mm GIVEN DATA Compressive Strength of Concrete f'c = 25.00 N/sq-mm Yield Strength of Steel fy = 250.00 N/sq-mm Area of Base Plate A1 = sq-mm Area of Supporting Pedestal A2 = sq-mm Axial Load on Base Plate Pu = 88 N Moment Mx Mx = 309 N-mm Moment My My = 700 N-mm Max Moment M= 700 N-mm Δ= mm Depth of Column d = 11.1 mm Width of flange bf = 10.34 mm
DESIGN
1 The allowable bearing stress Fp = 17.50 N/sq-mm
2 Area of Bearing Plate Required A1 = 5.03 sq-mm
3 Δ = 1.13 mm Required Length of Base Plate N N = 3.37 mm Provide Length of Base Plate N N = 4.00 mm Require Width of Base Plate Required B B = 1.2571 mm Provide Weidth of Base Plate B N = 1.00 mm
4 Actual Bearing Stress fp = 22.00 mm
5 Larger Value 'm' or 'n' m= -3.27 mm
n= -3.64 mm
6 Thickness of Base Plate Required tp tp = -1.94 mm
Provide thickness of Base Plate tp = -2.00 mm GIVEN DATA
An Investigation of Transient Thermal Analysis of 1 Stage Gas Turbine Blade Manufactured by Directional Solidification and Mechanically Alloyed Nickel-Based Superalloys
An Investigation of Transient Thermal Analysis of 1 Stage Gas Turbine Blade Manufactured by Directional Solidification and Mechanically Alloyed Nickel-Based Superalloys
