Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Porter Governor: 18BME0641 Sayantan Ghosh

    Uploaded by

    sayantan ghosh
    The document describes an experiment conducted to study the characteristics of a Porter governor. The experiment measured the (1) sleeve displacement and speed relationship and (2) radius of rotation and controlling force relationship of the Porter governor. Key measurements taken at different motor speeds included sleeve displacement, speed, height, angular speed, radius of rotation, centrifugal force, and controlling force. Results were recorded in a table and sample calculations were included. The average centrifugal force was found to be 38.0833N and the average controlling force was 19.702N.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Porter Governor: 18BME0641 Sayantan Ghosh

    Uploaded by

    sayantan ghosh
    13 views5 pages
    The document describes an experiment conducted to study the characteristics of a Porter governor. The experiment measured the (1) sleeve displacement and speed relationship and (2) radius of rotation and controlling force relationship of the Porter governor. Key measurements taken at different motor speeds included sleeve displacement, speed, height, angular speed, radius of rotation, centrifugal force, and controlling force. Results were recorded in a table and sample calculations were included. The average centrifugal force was found to be 38.0833N and the average controlling force was 19.702N.

    Original Title

    exp1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes an experiment conducted to study the characteristics of a Porter governor. The experiment measured the (1) sleeve displacement and speed relationship and (2) radius of rotation and controlling force relationship of the Porter governor. Key measurements taken at different motor speeds included sleeve displacement, speed, height, angular speed, radius of rotation, centrifugal force, and controlling force. Results were recorded in a table and sample calculations were included. The average centrifugal force was found to be 38.0833N and the average controlling force was 19.702N.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views5 pages

    Porter Governor: 18BME0641 Sayantan Ghosh

    Uploaded by

    sayantan ghosh
    The document describes an experiment conducted to study the characteristics of a Porter governor. The experiment measured the (1) sleeve displacement and speed relationship and (2) radius of rotation and controlling force relationship of the Porter governor. Key measurements taken at different motor speeds included sleeve displacement, speed, height, angular speed, radius of rotation, centrifugal force, and controlling force. Results were recorded in a table and sample calculations were included. The average centrifugal force was found to be 38.0833N and the average controlling force was 19.702N.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Exp.

    No: - 9
    Date : 18BME0641
    Sayantan Ghosh
    22/08/2020
    PORTER GOVERNOR

    Aim:
    To study the porter governor and plot the following characteristic curves
    1. Sleeve displacement Vs Speed
    2. Radius of Rotation Vs Controlling Force

    Apparatus: Tachometer, scale

    Porter governor:

    sleeve. The load moves up and down the central spindle. This additional downward force
    increases the speed of revolution required to enable the balls to rise to any pre-determined
    level.

    Description:
    The drive unit consists of small DC electric motor connected through belt and pulley
    arrangement. Motor and Test set up are mounted on a M.S fabricated stand. The governor
    spindle is driven by motor through V belt and is supported in a ball bearing.

    The optional governor mechanism can be mounted on spindle. The electronic control
    unit controls speed, an extension to the spindle shaft allows the use of a hand tachometer to
    determine the speed. A graduated scale is fixed to the sleeve and guided in vertical
    direction. The weight is added over the sleeve.

    Procedure:
    1. Make proper connection of the motion for porter governor
    2. Increase the motor speed slowly and gradually by means of regulator
    3. Take the sleeve displacement reading when the pointer remains in steady state
    4. Note down the speed of sleeve by means of tachometer
    5. Determine the experiment at different speeds and make a neat tabular column

    36
    Observation:
    1. = 127 mm
    2. Initial height of governor, h 0 = 80mm
    3. Initial radius of rotation r0 = 150 mm
    4. Mass of each ball (m) = 0.5 Kg
    5. Mass of the sleeve (ms) = 1.1 kg
    6. Additional mass placed (mc) =0 kg
    7. Total center Mass M = ms + mc =1.1 kg
    8.
    Formulae:
    Height of the Governor (h) = h0 x /2

    Radius of rotation (r) =


    Where a = Eccentric position = 47 mm

    Angular speed ( )=

    Controlling Force (F) = Newton

    37
    2
    Centrifugal Force = m r N

    L = 20cm

    l = 12.7cm

    4.7 cm

    Tabulation:
    S. No Displacem Speed Height Angular Radius of Centrifugal Controlling
    ent (rpm) (h) in Speed Rotation Force (N) Force
    mm ( ) r (N)
    (mm)
    1. 8 170 76 17.79 148.74 23.5369 17.46

    2. 27 185 66.5 19.36 155.197 29.0846 19.31

    3. 39 194 60.5 20.305 158.66 32.707 20.45

    4. 61 212 49.5 22.189 163.95 40.36 17.46

    5. 77 226 41.5 27.84 167.028 64.728 23.83

    38
    Sample calculation:

    39
    Result:

    The average centrifugal force is found to be 38.0833N.


    The average controlling force is found to be 19.702N

    Inference:
    The centrifugal and controlling force for the 3-porter governor are calculated and
    analyzed

    Signature:
    Date :

    40

    You might also like