SYONPSIS

On
“CNC”

Two Months Software Training Synopsis

At INWOWIZ, Chandigarh

<College logo>
Name of the college

SUBMITED TO:- SUBMITTED BY:-

<lecture name> <student name>
CLASS
ROLLNO
<Branch
TABLE OF CONTENTS

Table of figures....................................................................................................................................5
Acknowledgements.............................................................................................................................6
Visit contacts........................................................................................................................................8
Executive Summary............................................................................................................................9
Acknowledgements..........................................................................................................................12
Awarding body/s – individuals................................................................................................12
Fellowship sponsors....................................................................................................................12
Other support and assistance from:.........................................................................................12
International Specialised Skills Institute....................................................................................13
Skill Deficiency............................................................................................................................13
Overseas Skills Acquisition Plan - Fellowship Program.................................................13
ISS Research Institute.................................................................................................................13
The Australian Context, an overview of CNC processing in the Australian furniture
industry.................................................................................................................................................15
Quality systems.............................................................................................................................17
CNC training..................................................................................................................................17
Manufacturing design.................................................................................................................19
Organisations that have an impact on the industry (Victoria).............................................21
Aims of the Fellowship...................................................................................................................22
Implementation.............................................................................................................................22
Skills gaps...........................................................................................................................................25
Furniture design............................................................................................................................25
C.N.C. training regimes.............................................................................................................25
Part fixturing on C.N.C. machinery.......................................................................................25
C.N.C. tooling...............................................................................................................................25
Design and manufacturing........................................................................................................26
Quality systems.............................................................................................................................26
Waste minimisation.....................................................................................................................26
Emerging technology..................................................................................................................26
Small batch manufacturing.......................................................................................................26
Problem solving............................................................................................................................27
Manufacturing design.................................................................................................................27
What is CNC manufacturing?.......................................................................................................28
History of CNC wood working machinery..........................................................................28
Advantages of CNC processing...............................................................................................30
CAD-CAM.....................................................................................................................................31
CAD (computer aided design).............................................................................................31
CAM (computer aided machining or manufacturing)..................................................32
European perspective.......................................................................................................................35
Materials.........................................................................................................................................35
Machinery.......................................................................................................................................36
Quality.............................................................................................................................................37
Software..........................................................................................................................................37
Training...........................................................................................................................................38
Design..............................................................................................................................................39
Automation.....................................................................................................................................39

3
 Tooling............................................................................................................................................39
High speed cutting..................................................................................................................42
Fellowship program..........................................................................................................................44
Itinerary...........................................................................................................................................44
Visits.....................................................................................................................................................45
Ligna Plus machinery fair, Hannover, Germany................................................................45
Fachschule Holztechnik, Hildesheim Germany..................................................................48
Weeke Bohrsysteme GmbH, Gűtersloh, Germany............................................................49
Danish Technological Institute, Odense, Denmark...........................................................50
International Activities..........................................................................................................50
Mission.......................................................................................................................................51
Odense University College of Engineering, Odense, Denmark.....................................53
Carl Hansen and Son, Aarup, Denmark................................................................................55
Hans J Wegner.........................................................................................................................55
The factory................................................................................................................................56
Sauer-Danfoss...............................................................................................................................59
Skiolo Mullerup............................................................................................................................60
Berne University of Applied Sciences (HSB).....................................................................61
Wood Welding project, Berne University of Applied Sciences................................63
Stuber...............................................................................................................................................64
Fraubrunnen...................................................................................................................................65
Fluck Werke,.................................................................................................................................67
Schule fur Holzbildhauerei........................................................................................................69
Fachhochschule Rosenheim, Rosenheim, Germany (University of Applied
Sciences).........................................................................................................................................70
Unifor, Turate (Como), Italy....................................................................................................73
Outcomes of the fellowship...........................................................................................................75
Recommendations.............................................................................................................................76
Government....................................................................................................................................76
Industry............................................................................................................................................76
Professional Associations..........................................................................................................77
Suppliers.........................................................................................................................................77
Training providers........................................................................................................................77
International Specialised Skills................................................................................................77
References...........................................................................................................................................79

4
Table of figures
Figure 1 Study communication pathways.................................................................................23
Figure 2 Modern CNC Router......................................................................................................29
Figure 3 CNC processing centre..................................................................................................30
Figure 4 Advantages of micrograin carbide for CNC machining......................................40
Figure 5 Thermogrip CNC tool holder.......................................................................................41
Figure 6 HSC Graph........................................................................................................................43
Figure 7 Four and a half axis technology from Homag........................................................45
Figure 8 Thermoplastic dowels used to assemble furniture.................................................46
Figure 9 Loreley design using CNC technology.....................................................................46
Figure 10 Fachschule Hildesheim and student design...........................................................48
Figure 11 Ruler assembly line and robot track........................................................................54
Figure 12 Elbow chair by Hans Wegner....................................................................................56
Figure 13 Specially made clamps hold the chair until dry...................................................57
Figure 14 Cow cleaning equipment at Skiolo Mullerup.......................................................60
Figure 15 The Swiss education system......................................................................................61
Figure 16 Continuous sanding machine and robotic window assembly..........................62
Figure 17 Stuber head office and beam manufacture............................................................64
Figure 18 Fraubrunnen furniture and automated CNC technology...................................65
Figure 19 Fluck Werke Kinder furniture...................................................................................67
Figure 20 Fluck Werke and Robotic installation.....................................................................68
Figure 21 Swiss carving school, Brienz.....................................................................................69
Figure 22 CNC machining centre and Robot at Rosenheim Fachochschule..................70
Figure 23 Unifor product and form-work..................................................................................73

5
Acknowledgements

We would like to express our sincerest thanks to the following organizations

and individuals for their support.

Ms. Carolynne Bourne and the trustees International Specialised Skills

Institute for awarding a 2005 ISS Fellowship, and for their support and advice.
We commend ISS for recognising high technology furniture manufacturing
and design as an area of need, and for their financial support.

Holmesglen Institute of TAFE and RMIT University, department of Built

environment for allowing us leave to undertake the study and for contributing
to the costs. In particular Mr. Bruce McKenzie, Ms. Mary Faraone, Mr. Bruce
Prescott and Mr. Bill Presslor from Holmesglen Institute and Mr. Hendrikus
Berkers and Mr. Michael Goss from RMIT University.

In addition,
• Dr. Barbara Ozarska of the University of Melbourne.
• Professor Peter Vinden, CRC Wood Innovations, University of
Melbourne.
• Vicky Cammiade, Elite publishing.
• Barry Gabbett, Gabbett machinery.
• Mr. Ron Smythe, Biesse Australia.
• Mr. Antonio DiConza, Homag Australia.
• Mr. Chris Jones, Leitz tooling systems (Australia)
• Mr. Bob Daly, Davis furniture.
• Finn Tang Thomsen, Danish Technological Institute,
Odense, Denmark.
• Flemming Ilsoe, Odense University college of engineering, Odense,
Denmark.
• Knud Erik Hansen, Carl Hansen and son, Aarup, Denmark.
• Hermann Sielaff, Fachschule Holztechnik, Hildesheim, Germany.

6
• Mr. Theo Feldmann, Weeke Bohrsysteme GmbH (machinery
manufacturer)
• Andreas Zurbrugg, Berner Fachhochschule, Biel, Switzerland.
• Mr. Andreas Kisselbach, Dr. Wernher Fischer, Mr. Jurgen Graef, Mr.
Thilo Reichelt Leitz GmbH (CNC tooling manufacturer)
• Dr. Freider Scholz, Prof. Rainer Grohmann,
Fachhochschule Rosenheim (higher education)
• Mr. Craig Raison, Unifor, Turate (Como), Italy.
• Dr. Jose′ Vicente Oliver, AIDIMA (Valencia, Spain)

7
Visit contacts

♦ Hermann Sielaff. Dammtor 1, 31134 Hildesheim, Germany

♦ Theo Feldmann. Weeke GmbH Benzstrasse 10-16, D-
33442 Herzebrock-Clarholz, Germany
♦ Flemming Ilsoe. Niels Bohrs 1, DK-5230 Odense Denmark
♦ Finn Tang Thomsen. Forserparken 10, DK-5230 Odense Denmark
♦ Knud Erik Hansen. Holmevaenget 8, DK-5560 Aarup Denmark
♦ Andreas Zurbrugg. Solothurnstrasse 102, Postfach 6071, CH 2500
Biel 6, Switzerland
♦ Christoph Lengacher. Fraubrunnen AG, Kirchstrasse 30, CH-3312,
Fraubrunnen, Bern, Switzerland
♦ Prof. Freider Scholz. Holzfachschule strasse 1. 83024 Rosenheim,
Germany
♦ Craig Raison. Unifor Spa, via Isonzo 1 22078 Turate (como)

8
Executive Summary
There does not appear to be a uniform method of delivering CNC training
through the countries we visited in Europe. One impression was that there is a
lot of learning through trial and error. As we understand it there is some CNC
training delivered at years 11 &12 in the German post primary system. The
years 11 & 12 in Germany are specialisation years in specialised schools.
There are three streams with one somewhat like a technical school. The
Danish and Swiss experience seems similar to what happens in Australia.
That is, the supplier can program machines and/or the machine supplier
provides a short introduction course. Machine suppliers provide short course
training but this of limited scope. It could be assumed that broad based
training on CNC is not provided. The answer is a little confusing. There is
general training at a higher theoretical level. This includes G-coding and a
better understanding of drawing to component. It would appear that CNC
training in Australia exposes students to this technology at a lower level than
in Europe.

The Danish education system provides some interesting options for us. These
include a closer teacher to student contact. This was also evident in Germany
and Switzerland. Individual learning plans for each student will assist in
meeting the diverse needs of our Industry. Team teaching could be used to
put more teachers with various backgrounds in front of the students. Denmark
uses their facilities in a flexible manner, offering all of their facilities to who-
ever require its use. Two further observations are that Industry is very
involved in the trade education system, and dropouts are followed up with a
view to retaining the knowledge in the trade area.

New design and automation of CNC rails and pods allow for more flexible
positioning of the pods and quick set up times. Variety in pod shape and hold
down type (vacuum, clamp) can allow for greater concentration of force.
Pneumatic clamps can be used in conjunction with custom-made hold down
devices. These pneumatic clamps are operated remotely from the CNC
machine. That is that they are not part of the CNC compressed air system or
the drilling and routing program. They can be part of a robotic component
loading program and in these cases are partnered with CNC drilling and
routing programs. Laser lights can be used to preview component placement.
This can assist in fine-tuning pod placement and/or component layout on
multiple component hold down devices. A greater understanding of
mechanical fixing, jig construction and part holding would benefit Australian
companies.

Much can be discussed about tool magazine and collars. ISO and HSK were the
main two types we observed with HSK appearing to be the popular choice. HSK
is the choice where heavier solid timber work is required as, due to its design, it
has surfaces that lock more firmly into the electro spindle (Router), however at
the same time its design makes it more susceptible to fine dust entrapment. To
the later aspect dust clearing air jets (mounted on the tool

9
carousel) and good housekeeping techniques should overcome this issue. The
ISO should be considered where the predominant work is with MDF and other
fine dust materials as its design is less susceptible to fine dust build up. It was
also our impression that the ISO was less suitable for very high-speed
applications. Tool design is ongoing like all technologies and companies like Leitz
are at the forefront. Cutting tools can be coated to reduce friction and therefore
reducing heat in the cutter, allow for quicker feed speeds and reduce the power
consumption of the motor. Spiral cutters may be used for cleaner cuts with fluting
design for waste removal and noise reduction. Balancing of cutters and collars
along with improved cutter holding capabilities open the opportunity for higher
rpm and feed speeds. The use of Shrink fit and Tribos systems (see section on
tooling) are starting to see their way into the industry. Tooling is able to deliver
improved quality and performance and is an area that should be more fully
investigated and taught in our education system.

The contemporary European trends lead itself to CNC manufacture. CNC is

becoming more capable at complex component production and with the
increase in the use of robots, materials handling, assembly, sanding and
material finish treatments are becoming more automated. High end
automation is not always quicker but it is consistent and can run 24 hours a
day with far less labor costs and in these terms are very competitive and in
some cases beyond competition with lower technology countries. Classic and
contemporary designs to varying proportions are all possible to be produced
with CNC and Robot Technology. What were very evident were the
companies that specialised in one form of manufacture or another. Invariably,
work that would be done in the Australian factory would in Europe be
outsourced. This work included low -skill jobs that were cheaper from another
supplier, such as dressing of raw lumber. Other outsourced jobs included
components with specialised machining requiring expensive tooling. The
Australian way of doing it all in-house could be inefficient and greater sharing
of work between companies would assist in productivity and lower end costs.

The materials available often influence design and of course, what the market
will accept. This is similar to Australia. In the case of Carl Hansen (Denmark),
the designer has what amounts to absolute power. The designs of Hans
Wegner are made under license and the designer’s daughter who has
authority of the original design, is able to stop production if an error is found.
In the case of Carl Hansen, production levels are limited to ensure the quality
is maintained. European manufacture is either large quantities or small
batches. The ranges of furniture appeared to be limited and not too many
options were catered for. Some very interesting and innovative designs were
seen using plywood as a raw material. The products were shelving units,
cabinetry and chairs manufactured on CNC equipment and “snapped”
together using the material’s inherent bending qualities to fix the parts
together. More use of innovative designers would have a positive effect on
Australian product. A focus on design AND CNC manufacturing should be
investigated. The funding of a centre of excellence for design and CNC
manufacture will be a positive step towards a design culture that is able to
work in a modern manufacturing environment.

10
We visited several companies looking at lean manufacturing. The companies
had on-site, students from the Danish Technological Institute doing projects
on lean manufacturing. It is common practice in many Danish companies to
introduce lean manufacturing technologies incorporating CNC installations
into the work place. Lean manufacturing is also used without CNC and
provides an edge to Danish companies working in a small market, similar to
Australia. New process planning software can identify bottlenecks within the
company. Machinery companies are pushing to sell complete systems; in
other words fit out an entire factory with all the machines required to produce
that factory's components for their product range together with the software
for process planning and control. The systems are such that entry-level
machines can be purchased and a system can be built from a basic level. The
introduction of students into the workplace may be possible in Australia at a
level higher than apprentice.

11
Acknowledgements
Awarding body/s – individuals

• Office of Training and Tertiary Education (OTTE).

• ISS Institute

Fellowship sponsors

• ISS Institute (providing funding and assisting in organising the study.

• Office of Training and Tertiary Education (OTTE).
• RMIT university School of Design (TAFE) (providing funding, staff
release and assisting in mentor implementation)
• Holmesglen Institute Furnishing Industry Training Centre (FITC)
(providing funding, staff release and assisting in mentor
implementation)
• CRC Wood Innovations, University of Melbourne (provided financial
support, will collaborate with CNC manufacture using new materials
developed by the CRC including microwave modified wood)

Other support and assistance from:

• Furniture Teachers Advisory Group (FURNTAG)

• Computer Aided Manufacturing, Teachers Advisory Group (CAMTAG)
• Homag Australia (CNC machine supplier)
• Manufacturing Skills Australia
• Biesse Australia (CNC machine supplier)
• Gabbett machinery Australia (CNC machine supplier)
• Alexander J Cook (Manufacturer)
• Davis Furniture (Manufacturer)
• Schiavello Commercial Interiors (Manufacturer)
• Elite publishing (trade media)
• Leitz tooling (CNC tooling manufacturer and supplier)
• Shoda Travers (CNC tooling manufacturer and supplier)

12
International Specialised Skills Institute

Since 1990, ISS Institute, an independent, national, innovative organisation,

has provided opportunities for Australian industry and commerce, learning
institutions and public authorities to gain best-in-the-world skills and
experience in traditional and leading-edge technology, design, innovation and
management.

ISS Institute offers a broad array of services to upgrade Australia's capabilities in

areas that lead to commercial and industrial capacity and, in turn, return direct
benefits to Australia's metropolitan, rural and regional businesses and
communities. Our core service lines are identifying capabilities (knowledge, skills
and insights) to fill skill gaps (skill deficiencies), which are not available in
accredited university or TAFE courses; acquiring those capabilities from overseas
(Overseas Skills Acquisition Plan - Fellowship Program); then placing those
capabilities into firms, industry and commerce, learning institutions and public
authorities through the ISS Research Institute.

Skill Deficiency
This is where a demand for labour has not been recognised and where
accredited courses are not available through Australian higher education
institutions. This demand is met where skills and knowledge are acquired on-
the-job, gleaned from published material, or from working and/or study
overseas. This is the key area targeted by ISS Institute.

Overseas Skills Acquisition Plan - Fellowship Program

Importantly, fellows must pass on what they have learnt through a report and
ISS Institute education and training activities and events such as workshops,
lectures, seminars, forums, demonstrations, showcases and conferences. The
activities place these capabilities, plus insights (attitudinal change), into the
minds and hands of those that use them - trades and professional people
alike - the multiplier effect.

ISS Research Institute

At ISS Institute we have significant human capital resources. We draw upon
our staff, industry partners, specialists in their field and Fellows, here and
around the world. Based on our experience and acute insights gained over
the past fifteen years, we have demonstrated our capabilities in identifying
and filling skill deficiencies and delivering practical solutions.

Our holistic approach takes us to working across occupations and industry

sectors and building bridges along the way:

♦ Filling skill deficiencies and skill shortages.

♦ Valuing the trades as equal, but different to professional disciplines.
♦ Using 'design' as a critical factor in all aspects of work.
♦ Working in collaboration and enhancing communication (trades and
professional).

13
 ♦ Learning from the past and other contemporary cultures, then
transposing those skills, knowledge and insights, where appropriate,
into today's businesses.

The result has been highly effective in the creation of new business, the
development of existing business and the return of lost skills and knowledge
to our workforce, thus creating jobs.

We have no vested interest other that to see Australian talent flourish and, in
turn, business succeed in local and global markets. Carolynne Bourne AM,
ISS Institute's CEO formula is "skills + knowledge + good design + innovation
+ collaboration = competitive edge * good business".

Individuals gain; industry and business gain; the Australian community gains
economically, educationally and culturally.

CEO
Ms Carolynne Bourne AM

ISS Institute
Suite 101
685 Burke Road
Camberwell
Australia 3124
Telephone
61 3 9882 0055
Facsimile
61 3 9882 9866
Email
issi.ceo@pacific.net.au
Web
www.issinstitute.org.au

14
The Australian Context, an overview of CNC
processing in the Australian furniture industry.
1
Homag Australia (CNC machinery supplier) recently advised that, “Ninety
percent of CNC processing centres sold in Australia are three-axis machines.
A three-axis machine has three simultaneous NC controlled movements. Of
the remaining, nine out of ten machines are sold with only a sawing option as
the fourth axis.” A three-axis machine will be capable of drilling in the vertical
and horizontal planes (5 faces of the piece), performing saw cuts in one and
possibly two directions, and moulding or edge profiling using circular rotating
cutting tools selected primarily from a tool magazine.

Australia is (per capita) reported to be one of the largest users of CNC

2
machinery in the world . High-technology machinery in Australia is generally
of the following machine types. CNC beam (pressure) panel saws; CNC
routing machines; CNC processing centres; “low-cost” flat-bed NC routers;
NC moulding machines; PC controlled edge processing machines and other
programmable machines including wide belt sanders and shaping machinery.
The two main types of solid wood CNC processing machinery are the CNC
router and the CNC processing centre. While the CNC router is arguably more
suited to the working of solid wood, the CNC processing centre is the more
popular machine due to its lower purchase cost and perceived ease of
programming. Recently, the low-cost NC router using a flat table, tool change
and light-construction overhead gantry system is gaining popularity due to its
favorable pricing.

Before the results of this study can be fully appreciated and implemented, an
understanding of the current technical position of the Australian Furniture
Industry is essential. To this end the report “Analysis of current production
practices” (May 2001) was studied. The Furnishing Industry Association of
Australia (FIAA) and the Department of Industry, Science and Resources
(DISR) commissioned this report. Dr. John Mo, Mr. Stuart Woodman, Mr.
Sean O’Brien, Dr. Laszlo Nemes and Mr. Brian Scudds of CSIRO
Manufacturing and infrastructure Technology conducted the study. Their
report identifies the high-technology production issues that affect the
Australian Furniture Industry as follows:

1. Unsatisfactory use of computer systems and CNC equipment.

2. Piecemeal use of technology.
3. Lack of knowledge of CNC use and application
4. Poor training regimes.
5. The use of trade practices instead of production practices.

This extensive National report found that the industry perception is that CNC
machinery is good for batches of 50 or more, or repeat orders. This perception

1 Homag Australia, 9 Ormsby place, Wetherill Park NSW 2164

2 Source: Allwood machinery company (machinery suppliers)

15
prevents further exploitation of technology. Machine set up times are also
interesting in that it takes an average 9.4 minutes to set up a basic machine
and 9.0 minutes (average) to set up a CNC machine. There appears to be
minimal reduction in set-up times due to technology in the Australian furniture
industry.

Consultation with suppliers, trainers and manufacturers has identified the

following issues: CNC machinery is often purchased mainly to replace current
hand-fed production equipment. In addition, price and a sales relationship are
often determining factors when it comes to the final decision on the
technology to purchase. In many cases, purchases are made without the use
of consultants or fully exploring the available market in CNC equipment and
software. In most cases there is little planning as to the future manufacturing
needs of the machine shop. Components considered “too difficult” are usually
retained on existing machinery so that often no additional floor space is
achieved by the disposal of “obsolete” equipment.

Some investment is made on CAD-CAM software to assist in the development

and programming of prototypes and component parts, but this is often
supplied with the machine and is not always compatible with other software
used by the company. There is often no difference between manufacturing
techniques used on basic and/or CNC machinery. In many cases
manufacturers spend little additional funds on tooling (cutters) or jigging to
fully achieve the potential of CNC machinery. Standard cutting tools are used
extensively on CNC machines. Screws and staples are often used to hold
product to the worktable. Furniture making is carried out by small business
and employees are required to wear many hats. The various areas of furniture
making should be carried out by specialists, yet by necessity are undertaken
by few persons. The need for information and up to date skills is greater than
ever. The production of wooden components on CNC machinery is carried out
on an ad-hoc basis. Advice on manufacturing techniques and training regimes
is essential to promote a viable high technology design and manufacturing
culture. “CNC woodworking technology (and related CAD/CAM software) is
shaping up to be as influential to wood product manufacturing as the Internet
is to free communication” (VCR [Value and Created Resources] E-Journal,
Canada).

Australian furnishing manufacturing processes are generally not highly

automated with the result that factories cannot produce a large range and
number of furniture designs whilst still allowing for relatively small orders.
Small batch sizes are important in maintaining a good cash flow in the
furniture industry. In addition, a prompt delivery time is one factor that will
stand a company in good stead against imported product.

Australian CNC furniture manufacturing often functions at a low level of

competence while higher skill levels could combat imported products that
currently dominate the marketplace. Chinese manufacturers currently use
CNC technologies. For Australia to compete, we must be smarter. This can
only be achieved through a continual skills improvement through TAFE, ISS

16
and other organisations such as teacher advisory groups. It is important that
we investigate the ways people develop from operators into technicians.

Quality systems

TAFE and Industry is not widely skilled in the implementation of quality

systems in a CNC environment even though quality control and flexibility are
the prime consideration for most manufacturers. Quality control is about the
entire production process, not just about sanding the end product. Advances
in tooling and application of correct cutting data through CNC software should
enable a manufacturer to dispense with finish sanding and repair of product.
Dwindling timber resources produce a need for better skills in the recovery
and reuse of as much “waste” material as possible. Combining of jobs and
running multiple parts will reduce the power consumption of an enterprise and
reduce the requirement for pre-cutting. Waste is not just about what is thrown
in the bin.

CNC training

It is evident that a significant change in the Furnishing Training Package was

the introduction of Computer Aided Manufacturing and Computer Numeric
Controlled machining into the furnishing curriculum. After discussions
between providers, it soon became evident that there was a disparity in skills
and knowledge and a variety of standards and machines currently positioned
in training facilities around Australia.

Current CNC training is based on actually using the CNC machinery.

Suppliers of CNC equipment provide short two to three day training based on
specific machine types. This basic training is also provided to TAFE teachers
on purchase of CNC equipment. Put simply, operators (or teachers) are
shown which buttons to press. There is little focus on manufacturing using
CNC technologies. Operators are chosen from the existing workforce and
given basic training by the machine supplier, usually on a “need to know”
basis. Some manufacturers make use of training provided by TAFE Institutes,
often on different brands of machinery. In TAFE, some training at Holmesglen
focuses on manufacturing. This is provided to industry during three-hour
evening classes conducted over a ten-week period (80 hours). These courses
are very popular, and there exists a waiting list to attend these courses.
Clearly there is a recognised demand for training above the basic operation of
equipment.

Apart from TAFE there is little technical training available for Industry.
Traveling overseas to the machine manufacturer will only provide the same
level of training as that provided by the local supplier. There are no texts on
CNC manufacturing that are suitable for Australian use. Ken Susnjara (1998
and 2000) in the United States wrote the only recognised wood working CNC
texts and these relate in the main to nested-based manufacturing. Some text
is available in trade magazines but this is provided mainly by machine
suppliers and is in the main sales-oriented. Philip Ashley (fellow) is one of

17
very few regular writers of CNC articles with a series appearing in
Australasian Supplier magazine.

Real gains in productivity can be made with innovation in product design,

tooling, jig (template) design and optimisation of processes. Unskilled
employees will be unable to affect any single one of these issues. In addition,
the emergence of high-speed cutting technologies to spindle speeds of up to
40,000rpm will have a significant impact on the industry in coming years.
Training is absolutely vital to prevent serious mishaps resulting in horrific
accidents from cutting tools rotating at these enormous speeds.

The Diploma of furnishing technology and advanced diploma of furnishing

management contain units that include CNC technologies but are currently
void of content. There also exists a lack of suitable trainers to deliver these
skills to the industry. It is vital that we source or educate motivated trainers to
deliver these high-end training units. A description of these units follows.

 LMFFT4003A Organise production processes.

 LMFFT4005A Install and commission CNC software.
 LMFFT5002A Establish and develop production processes and
area layouts.
 LMFFT5003A Manage installation and commissioning of
equipment.
 LMFFT5010A Optimise CNC operations.
 LMFFT5011A Develop, trial and evaluate prototypes.

All six of these units contain learning using CNC machinery or revolve around
CNC technologies. All six require some attention to content and delivery
methodology. While the trades are the “backbone of our nation” higher
education will play an important role in ensuring that furniture making in
Australia does not slip into oblivion.

The establishment of partnerships between training organisations and

industry is limited even though this facilitates successful manufacturing
processes and allows for the sharing of skills and experience. There is still the
perception that “those who can, do and those who can’t, teach.”
Manufacturers often believe they know it all, but in fact know only what they
have been exposed to, or have stumbled across. On the other hand, trainers
need real world CNC manufacturing experiences that will allow them to
present meaningful CNC training.

The “effective” adoption of highly sophisticated technology into the furnishing

industry is limited, even though this is seen to be an effective means of
combating the increased levels of external competition. In most cases a low-
cost machine is installed in the belief that any CNC machine will affect the
bottom line. Very few companies will invest more to obtain equipment that will
make a difference. Training is needed in machine specifications and benefits.

18
Training programs currently deliver individual skills and discipline based skills
but should be providing training programs that cater for entire projects similar
to industrial situations. The new training package requires students to practice
CNC manufacturing in a simulated industrial situation. This requires the
satisfactory completion of a number of units related to CNC manufacturing,
including communications; plan reading and documentation, several CNC
machine types and software.

Australia fails to attract appropriate personnel into the furniture industry. It is

important that we understand the training and learning culture exhibited
overseas and implement ways to attract more motivated young people away
from the “glamour” jobs and back into manufacturing. This can be achieved
with a closer relationship with the secondary school system. Australia has an
aging population and training should be provided for existing employees with
little or no CNC experience.

The craft-based training culture existing in TAFE Institutes needs to be

supplemented by a production based training culture. While the crafts must be
maintained, a shift to production based manufacture is essential if the industry
is to prosper. In addition, there is a possibility of CNC machinery being used
in the craft area to reproduce rare and complex mouldings currently being
produced as a one-off.

There is a disparity in CNC skills and knowledge and a variety of standards

and machines currently positioned in training facilities. While this may be
unavoidable, we believe it is possible to teach a generic program on any
machine type. What is required are the skills and knowledge to teach the
subject while covering the basic principles used on all CNC machine types.
Industry’s knowledge of CNC manufacturing technologies is generally based
on a need-to-know basis, rather than an educational basis. Waiting lists at
Holmesglen Institute suggest there is a real need for advanced training
beyond that provided by the machine supplier. A machine technician normally
does the training provided by suppliers, and this person has little or no
teaching skills.

There is limited knowledge in emerging CNC technologies such as high-

speed-cutting. TAFE trainers must keep up to date on this and other emerging
technologies. There are limited skills in efficiency in CNC manufacturing
through innovative use of cutting tools, small batch sizes and job fixturing and
problem solving using CAD, CAM and CIM solutions. Any company would
benefit from advanced training in these areas.

Manufacturing design

There is currently limited “design and manufacturing” skills present in the

industry and more importantly, the training sector. Design in manufacturing
refers to the design of the workplace, the design of the product and the design
and problem solving of manufacturing solutions used to affect the
manufacture of the product. It should include recycling and landfill but very

19
often does not. Training programs need to equip graduates and managers
with the correct skills in modern production techniques, equipment and
design. Crafts persons and artisans make most new designs as a one-off job
lot; designers would do well to consider CNC manufacturing while the product
is still in the design stage.

20
Organisations that have an impact on the
industry (Victoria)
• Manufacturing Skills Australia
• Furnishing Industry Association (vic/tas) of Australia (FIAA)
• International Specialised Skills (ISS)
• RMIT University
• Holmesglen Institute of TAFE
• FURNTAG (Furnishing Teachers Advisory Group)
• CAMTAG (Computer Aided Manufacturing, Teachers Advisory Group)

21
Aims of the Fellowship
The aim of this study was to set up a viable community of practice around the
need for all registered training organisations to research CNC manufacturing
techniques and deliver training in CNC manufacturing as part of the new
Furnishing Training Package. It is proposed this study will assist in
establishing national linkages throughout Australia with training providers;
establish parity of skills and knowledge due to the variety of standards and
machines currently positioned in training facilities. It will also lead to new
resources and assessment methodologies for the training requirements under
the new Furnishing Training Package’s certificates 3,4, and 5.

The aims of this study are closely aligned with the National Training Advisory
Board’s (ALIMTAB) training needs over the next 5 years. “It is that the
transformation of this key industry and it’s change processes are supported by
appropriate skill development initiatives. The introduction of new technologies
and the vertical integration of processes through all stages of production to
distribution will impact the training required driving new approaches and
flexible responses (Taken from the Industry Trends and Training needs in the
light manufacturing industry. Performance Growth Pty. Ltd. produced this plan
for and with assistance of Australian Light Industry Manufacturing Training
Advisory Board).

This study also closely aligns with Minister Lynne Kosky’s “Knowledge and
skills for the innovation economy” document produced in 2002, as well as the
FIAA’s Response to the Federal Governments Furniture Action Agenda. Both
documents clearly call for the uptake of technology to enable increased
production efficiency and the use of technology in the development of
innovative solution to the changing global economy.

Implementation

• CAMTAG (Computer Aided Manufacturing, Teachers Advisory Group)

will be instrumental in overseeing the dissemination of skills and
information to registered training organisations through its mentor
network (see following diagram).
• FURNTAG ensured that the outcomes of the study were presented to
the National Furnishing Teachers conference in 2005. This will be in
the form of an official presentation / paper and may include workshops.
• The study outcomes will be presented in the trade media.
• Workshops and seminars organised by ISS.

CAMTAG is subsidiary to the nationally recognised FURNTAG (Furniture

Teachers Advisory Group) teacher organisation. Philip Ashley is chairperson
of CAMTAG. Bryon Stanley is chairperson of FURNTAG and all four
applicants are actively involved with both groups. CAMTAG will be active in
multiplying the benefits of this study tour and building CNC training depth,
driving new and innovative projects. This is a real project with real outcomes

22
 and benefits. CNC technology creates an expansive learning environment and
knowledge is currently limited to a few individuals. The proposed mentoring
model is essential to capture and disseminate understanding and skills across
the breadth of the VET community and manufacturing enterprises. The
following diagram (Figure 1) illustrates the proposed communication pathways
and personnel that the ISS study will support.

Project Leader
Philip Ashley
(CAMTAG)
Holmesglen

Mentor Protégé Mentor Protégé Mentor Protégé Mentor Protégé Mentor Protégé
Franklin ??? Bryon Stanley Neil Gordon ???
Wilbrink Holmesglen (FURNTAG) Holmesglen Holmesglen
RMIT University TAFE RMIT University TAFE

Lead d Lea Lea Le Lead Lead L

Mentors Mentors Mentors Mentors Mentors Mentors Mentors Mentors
from from from from from from from from
each each each each each each each each
RTO RTO RTO RTO RTO RTO RTO RTO

T F E & I N D S T R Y

Figure 1 Study communication pathways

The lead organisations involved are Holmesglen Institute of TAFE and RMIT
University. The mentor protégés will come from the two RTO’s and, with
Bryon Stanley and Philip Ashley, will work closely with Industry groups and
industry training boards throughout the project.

The loss of key teaching staff due to attrition, retirement or illness will be a
serious issue in the coming years. This study aims to eliminate this untenable
situation by providing a continual supply of CNC literate teachers able to
replace existing ageing staff (succession planning). There is also the
inability of existing staff to acquire and/or update their skills and experience in
the wider global manufacturing community. Simply saying, “this is the way it
is” will never substitute for access to the real thing. TAFE’s reputation for
excellence and innovation will be enhanced with teaching staff having access
and experience in issues related to the wider global situation.

This fellowship gathered information and skills in high-technology furniture

manufacturing and knowledge on training delivery in schools, Institutes and
industry. “There is increased pressure on using limited resources in a targeted
and effective manner.” Australia’s ability to compete on the World market is
dependent on materials, technology and a reliable skill base. No one issue
can stand alone, each one is interdependent on the other.

23
ISS and TAFE have an opportunity to lead the industry in CNC manufacturing
innovation, design and technical expertise. To the end of 2004 well over one
million dollars has been invested in CNC machinery for TAFE Institutes in
Victoria alone. Further investments through capital equipment grants and
special technology grants will increase this financial commitment. Investments
in teacher training in order to effectively use and teach this equipment has
been minimal. The current situation is that many TAFE CNC machinery
installations are ineffective due to a poor technical understanding and skills in
its use. Knowledge and a general awareness of CNC manufacturing regimes
in Europe gained by the participants will be disseminated to other TAFE
teachers. This will improve the ability of teachers to deliver CNC training in a
more international context.

This study is about developing and succession planning for high-tech

teachers to teach high-tech machinery and manufacturing processes. The
benefits to the four participants have been immediate and will without delay
improve student knowledge and skills in CNC manufacturing. CAMTAG has a
plan to facilitate the dissemination of knowledge and skills throughout the VET
community through an effective mentor network. The benefits to the broader
TAFE community over many years are immeasurable. This initiative will
satisfy industry’s need for effective, motivated CNC operatives able to
optimise CNC manufacturing solutions in a diverse industry.

This study will foster the following ideals and Industry benefits:

• Use new CNC technology to become an education partner with

regional secondary schools, TAFE institutes, research organisations
and universities.
• Assist in establishing and maintaining strategic partnerships with
organisations including research and commercial organisations,
secondary schools, Industry etc.
• Promote a culture of active vocational education research and
development, enhancing the ISS and TAFE’s reputation as forward
thinking market leaders.
• Continue to develop and enhance partnerships that increase the ISS
and TAFE’s resource base and allow the pursuit of further growth
opportunities.
• Develop a more positive approach to utilising the skills of designers in
the CNC manufacturing process to address the impacts associated
with low cost imports.
• Develop training programs that focus on waste minimisation, waste
management, environment protection, and sustainable CNC
manufacturing processes.
• Form effective partnerships with industry to develop furniture-training
CNC courses that satisfy industry requirements and covers areas such
as product development, quality systems, management training, as
well as a range of design subjects and products.

24
Skills gaps
Furniture design.

CNC manufacturing poses interesting possibilities for designers of furniture.

Coupled with modern assembly methods, the production of furniture using
CNC technologies, software and modern hardware needs to be investigated.
It is important to study the principles of furniture design as applied to CNC
manufacturing, and how this is delivered to furniture students in Europe at
both apprentice and certificate levels. The installation of a centre of
excellence for design and CNC manufacture will be a positive step towards a
design culture that is able to work in a modern manufacturing environment.

C.N.C. training regimes.

CNC training in Australia is mainly structured around operating machinery.

This study looked at advanced CNC manufacturing and training in European
industry and Institutes. It is important to learn how people are recruited into
the industry, what is taught and how it is delivered; in particular advanced
CNC manufacturing. It is important to learn how training programs equip
graduates and managers with the correct skills in modern production
techniques, equipment and design. It is important to learn how partnerships
between training organisations and industry facilitate successful
manufacturing processes and allows for the sharing of skills and experience.
It is important to learn how the craft-based training culture existing in TAFE
Institutes can to be supplemented by a (CNC) production based training
culture.

Part fixturing on C.N.C. machinery.

Part fixturing (jigs and holding devices) are based on traditional methods and
often unsuited to CNC manufacturing. It is important to learn advanced and
innovative methods of holding multiple parts in a single processing cycle. It is
important to learn how cutting forces affect job fixturing on CNC machinery.
The application of appropriate tooling is important when holding multiple parts
in a single machining cycle. Correct tooling will reduce the tendency of work to
“move” during machining. Jig manufacturing is not well understood and this is
an area that needs more work and knowledge.

C.N.C. tooling.

Tools (cutters) used on CNC machinery are generally basic in design. Our
industry does not understand the cost benefits of appropriate tooling
solutions. It is important to learn how to apply CNC tooling on CNC
machinery. It is important to learn how to design optimum tooling (tooling
magazine) configurations and how to optimise the delivery of the tool to the
work piece. It is important to learn how tooling can be used to effect furniture

25
design. It is important to study tool feed speeds to optimise the productivity of
each CNC process.

Design and manufacturing.

There is limited design and manufacturing skills on CNC machining of

furniture. It is important to learn how leading European manufacturers have
taken leading furniture design and manufacture the components with CNC
machinery. It is important to learn how factories are automated to deliver cost-
effective goods and how these issues are taught to operatives. It is important
to study the manufacturing and design requirements to deliver innovative new
designs quickly to the market place. It is important to learn how a large range
and number of furniture designs can be manufactured whilst still allowing for
relatively small orders.

Quality systems.

Quality control and flexibility are the prime consideration for most
manufacturers using CNC equipment. It is important to learn how quality
systems are implemented into the CNC manufacturing environment. Lean
manufacturing systems in place in European factories have improved output
and reduced costs. We would be wise to look at implementing lean
manufacturing solutions to create a more competitive workplace and work
force.

Waste minimisation.

Dwindling timber resources produce a need for better skills in the recovery
and reuse of as much “waste” material as possible. It is important to learn how
waste management systems are used in a CNC manufacturing environment
and how innovative CNC production methods can improve product recovery,
minimise production time and reduce materials waste, especially resource-
based.

Emerging technology.

There is extremely limited knowledge of emerging CNC technology. It is

important to study the latest trends in high-speed cutting (HSC) technologies.
It is important to study and learn about chip removal from the CNC cutting
area to improve surface quality and material feed speeds.

Small batch manufacturing.

There are limited skills in efficiency in CNC manufacturing through innovative

use of cutting tools, use of software, small batch sizes and job fixturing It is
important to learn the principles of small batch production and look at ways
these can be implemented in the Australian context.

26
Problem solving.

Problem solving using CAD, CAM and CIM solutions are rarely utilised. We
will learn how software is used to predict manufacturing outcomes and
overcome problems. It is important to learn how automation and CNC
manufacturing affects product manufacturing.

Manufacturing design.

There are limited skills in the design of the CNC manufacturing installation.
Machinery and software is purchased and installed in a haphazard manner
resulting in poor production flow and efficiencies. It is important to study the
principles of efficient plant layout and software integration. It is important to
learn how bottlenecks caused by CNC machinery are avoided. We will also
investigate content for advanced furnishing units LMFFT4003A Organise
production processes, LMFFT5010A Optimise CNC operations, LMFFT5011A
Develop, trial and evaluate prototypes.

It is intended that this study will introduce the participants to as many of the
preceding issues as possible. While it is not feasible to address every matter,
knowledge of the issues and the dissemination of appropriate information will
make TAFE staff aware and responsive to change and research. If these
issues are not dealt with immediately, the Australian Furniture Industry will
continue its decline in the World market, further conceding market share to
Asian countries, particularly China and Malaysia. Additional jobs will be lost
and the Industry will weaken, possibly into a cottage industry.

27
What is CNC manufacturing?
CNC woodworking machinery is available in many machine types. Solid
timber machines include edge-profiling machines such as tenoners, moulding
machines and CNC window production lines, and CNC profiling machines
such as “point to point” and “routing” machines. Profiling machinery is
generally used in the solid timber furniture, stair making, window, and joinery
and door sector. In Australia the most used CNC profiling machine is the CNC
“point to point” machine, or processing centre and this was the principal
machine considered in this study.”

History of CNC wood working machinery

The American Electronics Industries Association describes numerical control

(NC) as “A system in which actions are controlled by the direct insertion of
numerical data at some point. The system must automatically interpret at least
some portion of this data.” The McGraw -Hill multimedia encyclopedia
describes CNC as “The method of controlling machines by the application of
digital electronic computers and circuitry.” Put simply, NC and CNC are
processes where machine functions are controlled by letters, numbers and
symbols that the machine interprets as mechanical actions.

NC control came about as a result of the American military aircraft industry. At

the end of the Second World War the United States embarked on the
development of jet aircraft. It was soon apparent that the faster aircraft
required more complex and demanding parts. Conventional means of
manufacturing were falling short of the required tolerances and a faster, more
accurate method of parts manufacture was needed.

During the late 1940’s John Parsons was working on a system where
punched cards containing position data controlled a machine tool. The idea
was to machine flat templates to check the contour of helicopter blades.
Parsons submitted his idea to the U.S. Air Force in 1948 and was awarded a
development contract with the University of Massachusetts (MIT) Servo
Mechanisms laboratory the following year. During the next three years a
conventional milling machine was fitted with positioning servomotors for three
axes within the Cartesian co-ordinate system.

The machine demonstrated in 1952 looked very similar to a modern-day

single spindle CNC router. Different were the banks of computer consoles
needed to drive the servomotors, almost equal in area to the machine itself.
All this was driven from a punched paper tape, and became known as
Numerical Control, or NC. Computer Numerical Control (CNC) was not to
follow until IBM developed the personal computer.

Development in the wood working industries began in the mid 1960’s with the
first pressure beam saw, and a few years later the Ekstrom Carlson Company
offered the first NC router in the USA. The Japanese Heian Company

28
developed its first NC router in 1968 and in 1969 Shoda claimed the first
“circular-cutting” NC router. Early machines of the NC type relied solely on a
punched tape. No calculations or modifications were possible. Similarly, early
pressure beam saws were set by a series of BCD (binary coded decimal)
switches. Every time a new program was needed the switches would be
manually set for each cutting pattern. NC routers using punched paper tape
would need a new program and hence new tapes if any modifications were
needed.

The American Thermwood Company claims the first (Computer) CNC

machine, based on the Intel 8080 chip. Unlike NC, a CNC machine is able to
perform some calculations such as acceleration and deceleration of the axes,
and offer modification of programs at the machine control. These early CNC
routers used G-code as a programming language, and this is still used today
on all CNC woodworking machines where routing is performed. It is generally
not available to the operator but it is still required to control the machine
servomotors. A typical modern CNC router is shown in Figure 2.

Figure 2 Modern CNC Router

In the early 1980’s the first “point to point” machines appeared. These were
primarily drilling machines and were developed from engineering machines of
the same type where the workhead rapidly moved from “point to point” to
insert pre-programmed drilling patterns. A saw blade was often added but
there was no means of simultaneous interpolation of the three axes and
therefore no possibility of a routing option. Unfortunately the terminology has
stuck and now all machines of similar appearance are (incorrectly) referred to
as a “point to point” even though they have evolved from the original concept.
These machines are now referred to as machining centres or processing
centres. One such machine is shown in Figure 3.

29
These machines used a proprietary controller and software, and created a
situation where programs developed for one machine brand could not be used
on another. This has changed and now Windows-based software is used that
allows the transfer of programs through generic AutoCAD-format files. This is
known as “open-architecture” and compliments the use of Cad Cam software.

Figure 3 CNC processing centre

Advantages of CNC processing

• Reduced set up times can be achieved with CNC equipment. A CNC

program can be recalled for use within a few seconds. Given that the
tools and jigs can be quickly changed, set up time should be reduced
to less than five minutes. An additional set up advantage is that no
checks are necessary after the program has been proved.
• CNC will eliminate pre-cutting of components. This will save on tool
costs.
• Because CNC tools can be set to operate at their optimum feed rate,
tools will last longer. The fact that a CNC machine will not suffer from
fatigue will ensure that the tool will not burn due to reduced operator
performance.
• Cutting accuracy of one thousandth of a millimeter is an added bonus
and the next time the job is run it will be exactly the same in
specification and quality as the one processed today.
• Machining with spindle moulders and overhead routers mean that
complex jigs need to be made and maintained. This requires skilled
trades’ persons not only to use the machinery, but also to construct the
complex jigs. CNC machinery requires simple jigs (if at all) and

30
 these can be used even if the component dimensions are modified.
There will also not be a requirement for an extensive jig storage area.
• Because operators are not manually handling the jig and work piece,
there is less operator fatigue and the workplace features cleaner
working conditions.
• There is usually less capital investment than for traditional machinery
to do the same amount of work. A CNC machine will do the work of five
to eight static machines, and require considerably less floor space.
• There will be a reduction in processing errors, and as a result,
increased customer confidence in the product. An advantage that is
often overlooked is the reduced handling of components made on CNC
machinery. This results in less damage to parts, fewer stacks of
components and a quicker production cycle.
• A major advantage of CNC machinery is a reduced inventory.
• With CNC it is possible to practice the “just-in-time” manufacturing
principle. Make it, sell it and move on to the next job. What this means
is that small production runs become more economical. Control
over production planning is vital in knowing how much it is costing
manufacturers to make the product. CNC repeatability and
consistency of production can help achieve this.
• CNC equipment can provide versatile manufacturing options while
running smaller production lots. An example of this is where
machining operations can be combined into the one cycle.
• Complex parts can be produced with CNC machining centres. There
are numerous examples of parts that cannot be made with traditional
woodworking machinery, but can be simply machined using CNC.
Carved door panels are one example. Skilled wood carvers are rare in
Australia, and while the CNC machine will not provide the “hand-made”
look, a very classy carved finish can be achieved. The programming
time may be expensive, but once the program has been created, it is
available forever.

CAD-CAM

Cad-Cam is a more recent development of the CNC technologies. Much of

this development takes place due to the demands of the engineering industry
but this progress is also relevant to the woodworking sector. Cad-Cam is the
integration of the Cad (design or drafting) process with the Cam
(manufacture) of the component. A suitable Cad-Cam system should be
considered essential when purchasing computerised machinery. In fact, Cad-
Cam software is often considered an option and this sadly, limits the potential
of CNC equipment.

CAD (computer aided design)

Cad has been used for many years with the Autocad program being the
market leader. This program is used by 80% of draughts person’s around the
World. Cad systems are generally classified as either 2 or 3 dimensional. A
2D system draws lines on an X-Y plane with no height values. A 3D system
allows the user to define elements in three-dimensional space, allowing the

31
creation of 3D wire-frame models (two and a half dimension), with solid
modeling (3 dimension) capabilities.

Cad programs are object based graphics applications and interpret screen
images as mathematical constructions that can be readily manipulated. For
instance, a drawing entity (line or arc) is described as “a line from a start XY
position to an end XY position in a certain colour and on a certain layer”. This
is different to painting and photographic software programs such as the
paintbrush program supplied with “windows” software. These paintbrush
programs generate bitmapped images that use coloured dots much like the
pixels on a TV screen. Some bitmapped file types are bmp, pcx, tiff and jpg.

While all cad systems use object oriented data type, the file format can differ.
The file format is how the information is encoded, and for compatibility
between different cad programs, this encoding is often provided in a neutral
format, such as IGES, HPGL (Hewlett Packard graphics language) and the
most popular DXF (originated by Autocad, stands for Data eXchange Format).
A Cad -Cam program which is unable to produce one of these file types will
not be able to read files from another program, CAD draftspersons will not be
able to send work to a customer who has a different Cad software program.

The Cad program is used mainly for drawings of geometric shapes based on
lines and arcs. Possibly the most powerful is the “Autocad” program (or
software), which in the full version costs much more than the computer itself,
although a very good “light” version is available for less than a thousand
dollars. Less expensive “off the shelf” Autocad compatible cad programs such
as Intellicad and Turbocad retail for a few hundred dollars. These programs
can produce drawings of the intended product three times quicker than with a
drawing board. The drawing will be exact in every detail, can be modified to
incorporate design changes, and has the possibility of being applied to the
manufacture of the product. This is the Cam process.
CAM (computer aided machining or manufacturing)
Cam is relatively new to the woodworking industry, but will become the most
important manufacturing tool of future decades. Cad-Cam will become the
basic technology for the factories of the future. Cam programs take the Cad
drawing to the final stage to plan, manage and control the operations of the
factory through direct interface with CNC machinery.

Cad-Cam is today mainly applied through individual machines controlled by

task specific software, but the possibility is there to go beyond this narrow
application and to control the whole manufacturing process. This is referred to
as computer aided manufacturing. With this technology, the process is
controlled from the part design stage through the machining of the on the
pressure beam saw edge bander and CNC processing centre. Controlling
parts through the entire production process is referred to as “Cim” (computer
integrated manufacturing).

32
In the Cam (machining) process, the product parts are processed into
machine language that is transferred to CNC machinery as coded tool path
information. These codes control the tools and movement of the equipment
that in turn produces the components, usually to an accuracy of at least one
hundredth of a millimetre. There is minimal operator input at the machine so
semi-skilled persons can be used to load the parts onto the machine table and
stack them when the process is complete. This eliminates mistakes, and
speeds up the setting up of the equipment for a production run. This time is
often reduced from hours to minutes, and in some cases even seconds.

Currently, the major use of Cad-Cam in Australia is in the kitchen and cabinet
manufacturing industry. Here CAD can be initially used as a sales tool,
referred to as a “front-end” system. The sales person sits down with the
customer and within the space of half an hour or so a new kitchen or
bathroom has been designed in full colour on the computer screen. Views
from any angle complete with light and shade, reflections, kitchen utensils and
furniture, and even views through open windows are available to entice the
customer into a purchase. Recent developments include a virtual-reality walk-
through. A front-end system will produce photo realistic pictures and cutting
lists, but may not be able to produce any NC machine codes.

A front-end system can be upgraded to a manufacturing aid with the use of an

optimising program. A good optimiser will be able to produce detailed cutting lists
of all parts required for the job. In addition, a waste percentage, amount of edging
required, time to complete and production costs may also be calculated. The
optimised cutting patterns can be downloaded to the computer controlled panel
saw for immediate processing. Optimising software needs to be purchased from
an industry supplier, and is not usually available as a retail product. As the
optimiser is an aid to manufacturing, it is in fact a Cam program. There are some
front-end Cad programs that offer an optimiser as an option, but they are usually
very basic and do not provide many benefits.

The optimiser output can be set for maximum part recovery, which may
require the sheet to be turned during cutting. The recovery can alternatively
be set for the fastest possible cutting speed, where maximum recovery per
sheet is ignored. Either way the costs are accurately established before the
customer gives the go-ahead, and production begins. A good optimiser can
cost over thirty thousand dollars, but time and material savings, which can be
recouped within a few months of purchase, offset this.

After the parts have been cut, the machining information can be applied
through a Cad-Cam program supplied by the machine manufacturer. The
most common applications in Australia have been the Rovercad and Aspan
programs. These are true Cad-Cam applications, howbeit machine specific.
This means they were designed with a specific machine brand in mind. These
programs are also mainly focused on manufactured board. The parts are
drawn on the computer, and the machining processes applied. These
processes include drilling, routing and sawing processes, and on recent
machinery include edge banding and sanding. The optimised machine codes

33
are then sent to the machining centre, where modifications can be made.
Usually, however, the programs are ready to run and need little if any
modification.

For parts manufactured in solid wood, such as solid timber furniture, programs
such as “Pathtrace” and “Procam” can be used to produce three-dimensional
drawings. A tool path is then generated which is converted into machine code.
This process is called “post processing”. A Cad drawing from this software
can be post processed to run on any CNC machine. The most common
standard format is the G code machine language, a universal set of standard
linear and circular motion commands that are modified during the post
process stage to suit the specific tooling requirements of the machine. Where
skilled persons operate these programs, the output of the machine can be
doubled!

In addition, digitising or scanning can develop machine code. A digitiser is an

electronic tablet available in various standard paper sizes. The part drawing is
placed on the tablet and a stylus or puck is used to identify key points on the
drawing. Digitising is a quick method of programming parts from a sample
drawing or trace. A digitiser can be a handy tool and for around a thousand
dollars can offer the manufacturer another programming alternative.

Scanning can be performed with hand held or flat bed scanners, the resulting
bitmap image converted into a vector (Cad) image, then edited to smooth out
crooked lines and eliminate unwanted ones. Scanning may require a fair
amount of time-consuming editing to “clean up” the image. Scanners are used
extensively in the sign-writing industry where machine code is sent to flat bed
routers that use drag-knives to cut lettering.

A further element of the Cad-Cam process is the ability to schedule the

production. This can be done with a job-scheduling program that may cost as
little as a few thousand dollars. A calendar shows the schedule for each work
centre (machine) in the factory and a summary of the hours required for each
job. These programs are difficult to get working properly as they do not allow
for any problems or unforeseen circumstances that do arise from time to time.
Generally though, the people who use them say that they give a target to work
towards, and can be an efficient production aid.

34
European perspective.
The “perception” of the European furniture industry will vary depending on
personal observation, acquaintances, and what persons with vested interests
want you to believe. The brief snapshot presented here is therefore derived
more from published literature, reports and media, and what Europeans
involved in the industry itself has consistently reported. The opinion(s) of
training institutes and research centres are considered to be somewhat
“independent” and are highly valued. A 2002 Gottstein fellowship report
“Improved high value-added furniture manufacturing in Australia using
computer numerically controlled (CNC) equipment” by Philip Ashley has been
used to provide some background.

A long and successful history can describe the European furniture industry.
Museums throughout Europe house many fine pieces and these are now
regarded as examples of fine art. Fine designers and craftspersons such as
Chippendale, Sheraton and Boulle are universally regarded. In the post-
second World War period the demand to re-build Europe drove the building
and furniture industries, and mostly local crafts persons made furniture. Many
of the World’s leading furniture makers and machinery manufacturers are
located in continental Europe.

In the 1960’s an economic boom saw the furniture industry successful

primarily in replacing old products. Up until the 1970’s Italians in particular
continued to dispose of valuable furniture pieces, replacing them with the
latest “fashion”. Mass-production furniture companies prospered, often at the
expense of quality and taste. The 1970’s saw a boom in kitchens. The latest
electric appliances and a change in lifestyle from small workspaces to
entertaining areas saw the introduction of the “American” style kitchen. In the
1980’s the cost of raw materials increased, and many of the furniture
companies of the 1960’s had disappeared, replaced with enterprises that
were able to adapt to changing market demands. Design, marketing and
sponsoring were new tools that made all the difference. Companies
specialising in one type of furniture production used improved technology to
develop a flexible production based on smaller orders. The 1990’s saw the
introduction of regulations in product and machinery. New materials, fittings
and manufacturing technology were the driving factors.

The European industry is similar to Australia in that a high percentage of

machines are of the three-axis type and are used in industries employing less
than twenty persons. Similar also to Australia is the impact of imports from
countries with low labour costs, able to supply low-cost product to a consumer
market where cost, the latest design and shorter furniture “lifespan” are
current issues.

Materials

35
European furniture features many different materials and there is an
increased scarcity of solid wood used for furniture manufacture. Painted and
veneered panels, glass, aluminium and other materials are used extensively.
Solid timber is often difficult to source locally, especially of consistent high
quality. Competition from imports has forced manufacturers to seek out
alternative manufacturing opportunities such as kitchen and bathroom
manufacture. This is an area that importers have difficulty in supplying due to
the very specific “project oriented” nature of the installations. Production
based on panel products is (usually) a simpler process and materials supply
lead times are much shorter.

The use of solid timber for furniture manufacturing in Europe is diminishing.

Solid timber furniture is expensive due to the high cost of the raw material.
Where solid timber is used it is always of the highest quality. There is no
evidence of knots or any other “feature” in the material. Manufacturers are
3
moving more towards veneer board as the primary material , with the use of
solid edges on panels and tabletops to improve edge life.

Manufacturers use a variety of materials, such as plastic and aluminium in the

construction of furniture products. One example is cabinet doors with wood
and clear Perspex strips to give depth. Aluminium sections, glass, plastic and
other materials are used extensively. No material is considered outside design
possibilities. Successful companies are able to identify customer needs, and
quickly adapt to the changing marketplace.

Machinery

Woodworking machinery was developed mainly in Germany from the mid-

1960s when the major suppliers were established. Italian companies followed
some ten years later. While British manufacturers have largely disappeared,
machinery is now made in Spain, Scandinavia and some Eastern European
countries (due to low cost labour). The introduction of manufactured boards
created a need for new machinery and processes and many of the early
“craft” skills have gone to artisans or companies fulfilling the needs of niche
markets. CNC processing machinery is widely used in Europe to improve
production of a range of wooden items in the furniture and related industries.
CNC manufacturing provides opportunities to improve flexibility, quality, short
delivery times, operator safety and control over the end product.

CNC machinery is used in almost every type of solid wood manufacture.

Furniture (tables, chairs, bedroom and lounge), stairs, entry and cabinet doors,
joinery and window production are some examples. Companies using CNC range
from the largest companies employing 1000 people to small local enterprises with
less than ten employees. Some of the largest factories can be found in Germany,
Italy and Spain. Here, automated production lines produce furniture using CNC
machinery and automated production and assembly systems, manufacturing up
to a million (Australian) dollars of product a week.

3 Jose Oliver, AIDIMA, Valencia, Spain.

36
Quality

Quality is paramount where solid timber was used. Only the best timber is
sourced and every effort is used to ensure each piece is used well. European
companies often standardise components and edge profiles. Small job lots
are common and evident in both small and large companies. CNC machines
are used to perform the maximum number of operations in the one cycle.
There is much evidence of CNC machine sanding, and efforts made to apply
sophisticated tooling to avoid the sanding process (almost) altogether.

The German furniture industry has focused on quality product. It also has a
reputation for providing well-trained technicians for the industry. The Italian
furniture industry remains a model for other European countries with a well-
developed system of sub-contracting components and product development
through a close association with designers. It would appear that this model
would only succeed in Australia if enterprises were more aware of design as a
sales tool, and were able to share manufacturing resources and skills across
the industry.

Quality is one of the most important manufacturing considerations, and great

lengths are pursued to achieve consistent quality. This extends to strict
control of the moisture content. Where the climate requires factory heating it is
applied with consideration to the stored materials. While the use of solid wood
is diminishing, where it is used it is treated with great care to gain the
maximum benefit from every piece.

Software

Software is a major consideration with the purchase of a CNC machine and in

many cases is the determining factor. “Open architecture” software is
preferred to enable the use of data generated during the design stage to be
used as much as possible throughout production. This includes cutting lists,
part drawings and specification sheets. CAD drawings are post-processed to
machine code, or drawings are saved in a format compatible with the machine
CNC system. There is little use of “stand-alone” software.

Software is extensively used in companies with CNC installations. “Open-

architecture” programs are used to take the initial CAD drawing through
design, manufacturing and assembly. The concept was referred to on one
occasion as “fly by wire”. Few companies used “stand-alone” software.

Machine down time is always reduced to an absolute minimum. Quick

changeovers are achieved through software, documentation, training and
appropriate tooling. In addition, some products had been identified as being
unsuitable for CNC manufacturing, and are still processed using standard
machines.

37
Training

The training culture in Europe differs from Australia in that persons are more
likely to view education and training as a lifelong issue. It is not uncommon to
see middle aged students in further training programs. Companies do
however find it difficult to attract young people into the trades. Training in
German institutes is mostly “theoretical”. The view is that practical training on
machines in the trainee’s own company will be taught on-site. Formal “off-the-
job” training is more about the “what and why”, rather than the “how”.

Young school leavers seek out more “glamorous” employment and the
present skills shortages will reportedly continue. In addition, the ageing
workforce will place pressures on manufacturing labour in the near future. The
use of CNC machinery is often seen as a means of reducing skilled labour
however there is a perceived need for highly skilled “technicians” able to set
up complex programs, solve problems and make shop-floor decisions.
Germany in particular has a requirement for a joinery or furniture business to
employ a “meister” (six months full time course). In large companies around
ten percent of employees are skilled to this level.

Staff employed in furniture manufacturing is generally well skilled. Germans in

particular have a culture of continuing education and in many companies all
employees are regularly evaluated for effectiveness in the workplace. Persons
wishing to start their own business are required to hold at least a meister
certificate, or to employ a person who has. In Europe, as in Australia, the
value of the CNC technology varies with the skills of staff. Persons
responsible for the operation of the CNC machine are invariably well trained.
This does not always extend to the person feeding wood to the machine.

Apprenticeship systems similar to Australia produce well skilled men and

women able to work effectively on all types of equipment and manufacturing
processes. In addition, further education in the form of “masters” and other
University courses are well supported in most countries. For example, the
meister course offered by the Holzfachschule in Bad Wildungen requires six
months full time study and costs the equivalent of twelve thousand Australian
dollars, yet is highly regarded as a career stepping-stone. Government
subsidies are available and these are means-tested.

Much of the training offered in German schools and higher education is

theoretical and this was most evident at the University of Applied Sciences at
Rosenheim. Practical training is mostly delivered in the workplace. The ratio is
20% practice and 80% theoretical delivery. Seminars are different with 90%
practical delivery. Unlike Australia where training has mainly been oriented to
practice, high value is placed on an understanding of materials and
processes. It’s more focused to the why, rather than how. Weeklong courses
in operating safety are well attended.

38
The training cost in Australia and Germany is the same at approximately $10
per student contact hour. In Australia advanced courses are mostly part -time
but in Germany advanced training courses are often full-time with little
possibility of employment during the training. The University of Applied
Sciences at Rosenheim is one of the few Institutes that offer fully funded
places.

Design

The ageing European population is said to likely affect the retail market. While
ageing, the population is growing and the demand for increased housing will
be significant. Future housing will, however be smaller because of demands
on space, and furnishing these smaller homes will be a challenge to
designers. The demand is for furniture to be more functional than visual, multi-
purpose and easier to maintain. In particular, furniture as a fashion commodity
is having a reduced life expectancy, or shorter replacement cycles for
furnishing products. Good design is also used to simplify manufacture and
shorten lead-time. Environmental issues are growing in importance, and the
furniture industry needs to appear to be environmentally responsible. There
has been a deliberate shift in materials usage from solid timber to
manufactured boards in recent years. The supply of raw materials is a priority
for manufacturers and will continue to be so in the future.

Automation

Flexibility is often an important manufacturing issue. Some large companies

have actually removed conveyor systems and replaced them with wheeled
trolleys to improve flexibility of manufacture. Job lots are reducing and as few
as three or four kitchen doors are considered normal. With these small job
lots, trolleys are an ideal solution. Small companies with large amounts of
stock are considered unusual.

Larger companies tend to be more automated and have sophisticated

computer controlled manufacturing similar to vehicle assembly lines. Smaller
companies similar in size to Australian manufacturers will have one or two
major pieces of CNC equipment and mostly produce components as required
(just in time). Equipment use in Europe is similar to Australia. There are large
manufacturers using large-capacity four and five axis machines to process
product, but generally, three axis machines are most common, being 75% of
4
the market . Similar to Australia, a fourth axis is normally used to provide a
sawing option. These machines are more evident in the production of window
components and stair manufacture. Of particular interest is the increased use
of robotics to load CNC machinery and this is evident even in smaller
companies.

Tooling

4 Source: Weeke Bohrsysteme GmbH

39
Tools (cutters) used on CNC machinery are seen as a vital investment in
improving productivity. Tooling costs range from 5% to 30% of machine costs,
and in some cases exceed hundreds of thousands of dollars. Where specific
profiles are required, the customer contributes to the cost of tooling and
maintains exclusivity for a profile for a given time.

The use of carbide-tipped tools is increasing in Europe. High-speed steel

tooling was traditionally used for cutting solid wood because of the favorable
sharpness angle of 37 degrees. This benefit is now minimal as micro
grain/micro finish carbide can now be sharpened to 40 degrees with an edge
of one micron. Micro grain has a higher wear resistance that results in smaller
damage to cutting edges under normal cutting conditions. However larger
grain carbide is recommended when machining wood with foreign particles.
Figure 4 provides an estimate of improved tool life for different grades of
carbide and finish. Polycrystalline diamond (PCD) tools are used for
machining hardwoods, but softwoods contain more defects (knots) and are
considered unsuitable for processing with PCD. PCD tools are ten times more
efficient in eliminating heat due to friction. The result is less burning of the cut
edge. PCD is used at higher spindle speeds to improve edge quality, but not
to achieve a higher (material) feed rate.

Figure 4 Advantages of micrograin carbide for CNC machining

Due to the (usually) small job lots, flexibility and quick tool changes are crucial
factors in tool purchases. On cabinet doors for example, the Leitz “profilcut”
system tools (or a similar tool system) is used to provide quick changeover
times resulting in more flexible CNC production. The tool management can be
handled in-house with little dependence on tool suppliers. “System” tooling is

40
expensive but because the tool bodies are a one-off purchase, the ensuing
production benefits far outweigh the initial tool cost. Where furniture shaping
is necessary, many companies standardise profiles as much as possible to
reduce the number of profile tools needed. While waste is an issue, the
production of off cuts is minimised. This is achieved with tooling capable of
“cutting to dust”.

Some of the latest developments in European tooling are focused towards

reducing runout. “Runout” is an imbalance of the tool caused by the collet
chuck and results in only one of the two cutting edges actually contributing to
the quality of the machined surface. This means that optimum tool feed rates
are not possible, and lower feed rates used to factor in a quality standard will
tend to reduce the life of the cutting edge. Aluminium tool bodies are used to
reduce the amount of unbalanced weight in the tool body but the interface of
the cutting tool and tool holder (chuck) is where most of the imbalance occurs.

New tool holding technologies such as the Leuco “Tribos” and Leitz
“Thermogrip” systems are beneficial in reducing runout to the levels possible
with the traditional hydro clamping system. The hierarchy of tool holding
systems is as follows (best to worst):

1. Monoblock tool (Tool mounted directly to the spindle interface)

2. Hydro clamp chuck AND Tribos or heat shrink chucks
3. Balanced collet chuck
4. Unbalanced collet chuck (least effective in reducing Runout)

Traditional collet chucks have been tested to a Runout value of .025m. This
is 25 million parts of a metre, or 25 thousand parts of a millimetre. Technical
advice supplied by the Leuco Company is that 15 m runout is the limit for
good cutting quality. Hydro and “Thermogrip” type chucks tested to a runout
value of 3 m. However, hydro chucks are three times more expensive than
Thermogrip or Tribos type chucks and the feeling is that in time the industry
will adopt the new chuck technology to reduce costs. The new chucks are
also a slimmer design and have a tendency to improve chip flow (extraction).
An example of the new technology tool holders is shown in Figure 5.

Figure 5 Thermogrip CNC tool holder

41
High speed cutting

The term “HSC processing” (high speed cutting) originates from the
metalworking sector, and refers to the cutting or machining of materials at
enhanced (higher) cutting speeds. Current CNC machine spindle speeds are
supplied in the order of 18,000rpm to 24,000rpm with 18,000rpm being the
most common speed. Improvements in the edge quality of wood furniture
components can be achieved by increasing the cutting speed of the tool. The
cutting speed refers to the actual speed of the tool edge, not the revolutions
per minute of the spindle although a higher RPM will achieve a higher cutting
speed.

It is possible to increase the cutting speed of tools by increasing the tool

diameter but unfortunately the greater the tool diameter the greater the
possibility of unbalance. Increasing tool diameter also means that more teeth
are required, as the tooth progression (distance between each cutting tooth)
will change. In the woodworking sector today, cutting speeds of up to 80 m/s
are achieved when trimming with large diameter profile tools. Knowing this, it
is evident that the cutting speed of profile tools in the range of 80mm to 90mm
diameter is optimal.

The optimum wood cutting speed range of routing tools is 50 to 80 metres per
second and small diameter tools are unable to achieve even the lesser speed.
A 25mm cylindrical router cutter has a cutting speed of only 23 m/s or less
than half that recommended. The following diagram (Figure 6) demonstrates
the peripheral speed produced by various diameter tools operating at various
speeds (RPM). It is in the area of small diameter tools that gains in quality and
productivity due to greater spindle speeds is most apparent. To achieve
optimum performance it is necessary to lift spindle speeds to between 30,000
and 40,000 rpm. The mechanical engineering requirements for HSC
processing are a high degree of rigidity in the machine frame, improved axes
drives for greater response accuracy, high spindle speed and tools designed
for high-speed rotation.

The higher kinetic energy presents some increased risk if tools were to break.
Human error in installing the wrong tool and accelerating a large tool to very
high speeds will also be a serious risk. Expensive CNC tool management
systems using microchips embedded in the tool itself is currently the only sure
way of preventing this. Future developments will see torque momentum
sensors on the machine spindle.

Homag (machinery), Leitz (tooling), Leuco (tooling), Benz (spindle

development), IFW (University Stuttgart), FH Rosenheim (University
Rosenheim), Reichert Holztechnik (manufacturing trials) and Wossner
(manufacturing trials) have completed a four-year government funded
program into high-speed cutting using CNC machines. Recent research
includes spindle development, safety, and the removal of waste (chip flow) at
high cutting speeds. The German ministry for education, development and
research funds the program. When this technology becomes available in

42
 Australia, production of components on CNC machinery can be doubled! The
benefits of HSC are that when higher RPM brings the cutting speed to an
optimum level, higher feed speeds can be used to reduce the cutting time,
increasing material output.

60,000

Objective: Performance enhancement by 100%

50,000
Vc max = 80 m/s (cutter head tools)

40,000

HSC
n = Vc
30,000
π
*d

20,000

Conventional
Formatting
10,000
Vc = 20 m/s
(Current Vc min = 40m/sec.
Speed n [rpm]

technology) (recommended)
0

0 1020 30 40 50 60 70 80 90 100 110 120 130 140

Tool diameter d [mm]

Figure 6 HSC Graph

43
Fellowship program
The fellowship program sought to answer the questions and acquire skills
embedded in the skill gaps as identified earlier. The fellows visited the
international Ligna wood working trade fair held every two years in Hannover,
Germany. There we met with technical representatives from leading suppliers
of CNC machinery, tooling and equipment.

The fellows visited leading furniture and machinery manufacturers, designers

and wood workers skilled in the design and implementation of manufacturing
solutions using CNC machinery in a targeted and effective manner.

Itinerary

The study tour was organised as follows:

MORNING AFTERNOON
DATE LOCATION VISITS CONTACT VISITS CONTACT
30th April Travel Melbourne to Germany (Hannover)
2nd May Hannover Ligna trade fair Various Ligna trade fair Various
3rd May Hannover Ligna trade fair Various Ligna trade fair Various
4th May Hannover Ligna trade fair Various Hildesheim Hermann Sielaff
Fachschule
Weeke CNC factory Theo Feldmann
5th May Hannover Ligna trade fair Various Ligna trade fair Various
6th May Hannover Ligna trade fair Various Ligna trade fair Various
7-8 May Travel Germany to Denmark (Odense)
9th May Odense Danish Finn Tang University college of Flemming Ilsoe
Technological Thomsen engineering
Institute
10th May Odense Carl Hansen Knud Erik Sauer Danfoss Finn Tang
Hansen Thomsen
Skiolo Mullerup Finn Tang
Thomsen
11th May Travel Denmark to Switzerland (Biel)
12th May Biel Berner Andreas Stuber Andreas
Fachhochschule Zurbrugg Zurbrugg
13th May Brienz Fraubrunnen Christoph Fluck Werke Andreas
Lengacher Zurbrugg
Brienz Schule fur Andreas
Holzbildhauerei Zurbrugg
14th - 15th Travel Switzerland to Germany (Rosenheim)
May
16th May Rosenheim Technical Rosenheim wood
museum, museum
Munich
17th May Rosenheim Fachhochschule Freider Scholz Fachhochschule Rainer
Grohmann
18th May Rosenheim Fachhochschule Freider Scholz Fachhochschule Prof. U Paul
19th May Travel Germany to Italy (Milan)
20th May Milan Unifor Craig Raison Unifor Craig Raison
21 – 22 Travel to Australia
May

44
Visits
Ligna Plus machinery fair, Hannover, Germany.

According to figures published by the German Engineering Federation

(VDMA) Germany remains the World’s top producer of wood working
machinery with a 2004 turnover of 3.1 billion Euros. The Ligna fair held every
two years in the German city of Hannover still remains the World’s biggest
woodworking fair. In fact this year’s fair held during May was reported to be
the best show yet. A comprehensive range of events was organised to cater
for every facet of the forestry, wood and secondary processing industries
using wood as the primary material.

The major exhibitors at Ligna this year were again the Homag, Biesse and
SCM groups. The importance of Ligna to the three groups can be seen by the
enormous sums invested in the exhibits. Some of the largest companies were
reported to have spent in excess of five million Euros (A$8.5 million). At this
year’s fair there was an increase in the number of four (Figure 7) and five axis
machines on display. In addition, complete working centres where (mostly)
panel material was first cut, transported and then re-worked to a finished
component, all in the one machine were exhibited. The visit to Ligna was
important to provide an overview of CNC technology to the tour participants,
as this fair is in reality a “one-stop-shop” for the World’s machinery
manufacturers.

Figure 7 Four and a half axis technology from Homag

In addition to the endless displays of wood working machinery, Ligna

Hannover supports presentations in other vibrant categories. An outstanding
example was HSB Institute (Biel, Switzerland) demonstrating the ability to
weld wood using high-speed vibration technology. The project team is able to
“weld” wood up to 150mm in length, attaining adhesive strength within
seconds. The high-quality, environmentally friendly product has only one
drawback, a dark line due to the intense heat generated by the process. Other
innovative new technologies included a new technique for glueless assembly
of workpieces where thermoplastic dowels are melted by ultrasound,
penetrating into the porous material of the work piece and hardening in
seconds (Figure 8).

45
 Figure 8 Thermoplastic dowels used to assemble furniture

An interesting example of CNC technology being used to manufacture

affordable household furniture was presented by “Loreley” design. Loreley
manufacture with plywood on a basic 3-axis CNC machine and produce
tables, chairs and storage units such as shelving and cabinetry. The product
can be quickly assembled and uses the materials own spring tension to hold
together (Figure 9).

Figure 9 Loreley design using CNC technology

It was interesting to see where all the wood working machinery is heading as
this is probably where our next competition is coming from. Eastern Europe is
on the move with significant increases in German and Taiwanese machinery
purchases. In particular, Turkey shows an increased interest in wood working,
as does India, South Korea and Vietnam in Asia.

46
The key issues from our visit to the Ligna fair were the use of robotic systems
to load and unload CNC machinery. This has increased considerably since
fellow Philip Ashley was there four years ago. In addition, the use of
automated systems has increased and improved. It is now possible to set up
a complete CNC line in the one machine. This equipment unstacks, cuts,
machines, applies further processes and stacks without human intervention.

The significance for Australia will be if countries such as China start to

implement such equipment and can reduce their labour overheads even
further, imported goods may be even cheaper and the Chinese may even be
capable of delivering “project-based” furniture such as kitchens and office
designs into this country at a competitive cost and time frame.

For us as visitors, it was interesting to see the variety of CNC machinery and
applications the equipment could be put to. This knowledge has already
started to be filtered to TAFE students and Industry through classes
conducted at RMIT and Holmesglen, and through the mentor system set up
through the CAMTAG organisation.

47
Fachschule Holztechnik, Hildesheim Germany.

Our visit to the Fachschule

Holztechnik in Hildesheim was
organised through Mr. Hermann
Sielaff of the school. Mr Sielaff was
exhibiting at the Ligna fair. The
school is one of higher education
and interesting in the way design is
implemented into the teaching of
furniture manufacturing using all
types of equipment, inclusive of
CNC.

Students complete a project for

completion of the course. This
project is a complete furniture piece that has been designed by the students
themselves. Students work in teams in the design and manufacture of a
product that is then “sold” using a website set up for this purpose. A limited
number of units are produced and sold in this manner. Students access the
workshops at various times during the week and often out of “normal” hours. It
is not uncommon to see students sitting around in groups in self-directed
sessions.

The facilities at Hildesheim are pleasant, with recent machinery and up to

date laboratory equipment. Student’s work partly by their own initiative and a
progress board chronicles their progress (or lack of). An example of the
facilities and a sample student piece is shown in Figure 10.

Figure 10 Fachschule Hildesheim and student design

48
Weeke Bohrsysteme GmbH, Gűtersloh, Germany.

Weeke Bohrsysteme GmbH is a traditional machine manufacturing company

established in 1945. At that time Gustav Weeke & Son founded a locksmith’s
company in Herzebrock in Westfalia that had the aim to solve the requests of
the woodworking companies. Weeke developed the first worldwide lock
insertion machine in 1954. The next machine allowed multi-spindle drilling into
work panels, eliminating the costly and difficult groove-and spring connecting
method that was used up to that date. Since that time, CNC-Technology and
chaining with other processing aggregates has become State-of-Art at
Weeke. In May 1986 the family -owned company was integrated into the
Homag Group. Weeke took over the role in the special range of drilling,
routing and assembly technology for lower-cost processing.

Weeke is typical of most European manufacturers in those sub-suppliers

produce basic parts that are re-machined by Weeke prior to assembly. The
company is currently developing through -feed panel machinery with the
capability of top and end drilling in addition to gluing and dowel insertion to a
capacity of eight thousand panels per shift. In the area of CNC processing of
timber products the company has a range of machines based mainly on table
size. Three axis machines are the largest production volumes, but Mr.
Feldmann sees a shift towards four-axis technology.

Since our return, Holmesglen Institute has placed an order for a four and a
half axis machine from this company; to be situated in a specialist CNC
design centre at Holmesglen’s Integrated Manufacturing Cell.

The benefit of visiting a Machine manufacturer was the ability to see first-hand
the construction of CNC equipment.

49
Danish Technological Institute, Odense, Denmark.

Danish Technological Institute occupies a crucial position at the point where

research, business, and the community converge. The Institute’s mission is to
promote growth by improving interaction and encourage synergy between
these three areas. The Institute is located at six premises throughout
Denmark. Our visit was to the facility located at Odense in central Denmark.

The Institute was founded as an independent institution in 1906 and is one of

the oldest of its type in the world. The Institute now has almost 850
employees, making it one of the world’s largest private institutes to supply
approved technological services such as consultancy, tests, certification and
training for companies and public-sector organisations. Danish Technological
Institute is an independent, not-for-profit institution approved by the Danish
authorities to provide technological services to business and the community.
The Institute employs experts in hundreds of different fields at 40 centres
organised under the auspices of the 6 organisational units that define the
main parameters for their work:
♦ Building Technology
♦ Industry and Energy
♦ Informatics
♦ Materials
♦ Productivity and Logistics
♦ Industrial Development

The Institute adopts an interdisciplinary approach to innovation and to the task

of improving the ability of small and medium-sized companies to exploit new
technologies and management tools. Customer activities and close
cooperation with a wide range of enterprises account for the majority of the
Institute’s turnover. The Institute has a turnover of some Euro 83 million and is
financially sound.

The Ministry of Science Technology and Innovation invests some Euro 15

million per annum in the Institute’s R&D activities and the dissemination of
R&D results. These funds are supplemented by the significant sums that the
Institute contributes to self-financed joint development activities and
investments in equipment. Around 10% of the Institute’s turnover stems from
activities abroad, and healthy relationships have been established with
R&D departments in Europe, North America and the rest of the world.

International Activities
Danish Technological Institute is active in a wide range of international
projects and has a significant international network. This means that new
knowledge and technology are exchanged on a running basis. By working
internationally the Institute ensures an international level of experience in their
business areas - for the benefit of Danish and international customers.

50
The Institute participates in international programs under the auspices of the
EU, the UN and a variety of other national and international organisations. In
recent years, the Institute has been particularly active in Eastern Europe.
The objective of the Institute is to generate value for its target groups by
making the best possible use of knowledge available anywhere in the world. A
precondition for all of the Institute’s activities is that they must generate
improvements and growth.

Danish Technological Institute wants to be Danish companies preferred

supplier of technical and managerial service in our core competences and a
recognised partner within neighbouring international markets.

Mission
Danish Technological Institute aspires to be:
♦ The main service institute to Danish SME’s
♦ An important supplier of specialist know-how - also to large companies
♦ A dynamic developer and mediator of new technological know-how to
innovative Danish companies
♦ A recognised service supplier in the Northern and Eastern European
markets
♦ An attractive partner to research centres, organisations, institutions and
public authorities as well as private consultants
♦ An important bridge to the newest national and international knowledge

Characterised by services, that promote:

♦ Innovation and competitiveness
♦ Learning and qualification
♦ Sustainable use of resources
♦ Cost effectiveness

"Knowledge that works"

Danish Technological Institute is an independent, non-profit institution
recognised as an approved technological service institute according to the
Law on Technological Service. Her Majesty Queen Margrethe II of Denmark is
patroness of Danish Technological Institute.

(The preceding text was provided during our visit and is available on the
website at www.danishtechnology.dk )

Denmark has few natural resources. What they lack in resources is made up
for in know-how. The country has a high level of appreciation for training and
knowledge. Unlike Australia, it is almost impossible to get a job in a trade area
without a qualification. A high level of co-operation exists between their TAFE
equivalent and Industry and we found evidence in this in the industrial release
and project programs we visited at Skiolo and Sauer Danfoss. In Denmark,
Industry values qualifications and foster high levels of skills. Students are
provided with substantial income support while training. A high staff to student
ratio also assists with good training regimes. Their pre-apprenticeship

51
programs differ to Australia in that the students do a range of subjects that
enable them to choose different career options at the completion of the
course. There exists the means for students to leave and re-enter the
education system. Young people are well catered for educationally. The
country supports this with higher taxes, but the public sees where this is being
used and accepts this.

Mr Finn Tang Thomsen

of the Institute was
instrumental in organising all our visits in Odense, Denmark. There were no
facilities at this location.

52
Odense University College of Engineering, Odense, Denmark.

Odense University College of Engineering was founded in 1905 as the first of

its kind in Denmark. Since then it has developed into a fully comprehensive
and advanced university of applied sciences offering B.Eng. and M.Sc.
degrees in engineering.

The University participates in several international educational programmes

and organisations, including the European Society for Engineering Education.

Odense University College of Engineering offers eight courses (3 1/2 years

each) leading to a Bachelor of Engineering degree (B.Eng.):
♦ Chemical, Biochemical and Environmental Engineering
♦ Civil Engineering
♦ Electrical, Electronic and Computer Engineering
♦ Global Management and Manufacturing
♦ Information and Communication Technology
♦ Integrated Design
♦ Manufacturing and Management
♦ Mechanical Engineering

They work in close cooperation with the University of Southern Denmark in

providing six courses (5 years each) leading to a Master of Science degree in
Engineering (M.Sc.):

♦ Chemistry
♦ Physics and Technology
♦ Environmental Engineering
♦ Computer Systems Engineering
♦ Structural Engineering
♦ Product Development and Innovation

(The preceding text was provided during our visit and is available on the
website at www.ouc.dk)

The University focuses on industry co-operation, problem based learning and

internationalisation. The University believes that a high level of student
involvement, application of knowledge and real-life experiences make better
engineers. The University is actively involved in the “Robocluster” group and
this technology is likely to have a major impact on manufacturing in Denmark.
We saw evidence of an increased use of robotics throughout our trip.

The University’s one-year robotics course covers the following:

♦ Problem-solving, building a robot
♦ Project management and teamwork
♦ Evaluation of technical, business and political aspects
♦ Basic C programming of embedded (robotic) systems
♦ Robotic controller architecture
♦ Industrial automated engineering

53
 ♦ Sensor and actuator technologies

The University has extensive workshops and machine shops and students
build and program robots for various applications. Figure 11 shows a track
laid out on the floor that a robot is “trained” to follow. This is a basic step in the
education of these young people. Also shown is a picture of the wooden ruler
production line. This very basic layout is used to teach students the
relationship between manufacturing stations and leads to the concepts of lean
manufacturing where each manufacturing station is designed to fit into the
flow of the entire line.

Figure 11 Ruler assembly line and robot track

The key issues at the Odense University College of Engineering was the
robotics program and the training of students in lean manufacturing (including
release to industry for project work).

54
Carl Hansen and Son, Aarup, Denmark.

There are many classic chair designs. Gerrit Thomas Rietveld (1888-1964)
designed the famous red and blue and Zig Zag chairs. They may not be very
comfortable to sit on, but these recognisable designs will last forever. Arne
Jacobsen designed the Egg Chair, one of the most influential post-war
furniture designs and the ant chair (1951) for Fritz Hansen, a commercial
chair manufacturer based in Denmark. The ant chair is familiar in restaurants,
public halls and other high-density seating situations.

Carl Hansen (no relation to Fritz) specialises in classic design chairs by Hans
J Wegner. Carl Hansen has been making Wegner’s designs since 1949 when
the wishbone chair (CH-24) went into production with a woven fibre seat.
Other designs include the CH-07 (shell chair) a three-legged chair designed in
1963 featuring a lacquered bent plywood frame with wool seat elements. The
“shell” chair sells for around $2,000 each! The stackable CH-20 (“elbow
chair”-1956) is one of the most difficult chairs to manufacture but this has
been achieved by technology (Figure 12). Carl Hansen also produce a
number of other classic Wegner chair and table designs that are exhibited at
The Museum of Modern Art in New York. Carl Hansen is a company built on
quality, technology and relationships; but most of all, design.
Hans J Wegner

Hans J Wegner trained as a cabinet-maker before attending the Copenhagen

School of Arts and Crafts, where he later lectured from 1946 to 1953. From
1938 to 1942, he worked as a furniture designer in Arne Jacobsen and Erik
Moller’s architectural workshops. 1943 saw him set up his own studio in
Gentofte where he worked with Borge Mogensen in the design of an
apartment shown at the 1946 Cabinetmakers Exhibition in Copenhagen.
Inspired by classical portraits of Danish merchants sitting in Ming chairs, one
of his first chair designs was the ‘Chinese’ chair and this would provide the
basis for many of his later chair designs. Wegner created a series of chair
designs that helped establish Denmark as an international leader of modern
design. The Wishbone Chair (CH-24) is widely considered to be his most
successful of the series.

Wegner is one of the principals of ‘Danish Modern’ furniture. His designs were
intended to stand on their own merit, and not necessarily form part of a set.
He has a deep understanding of furniture for everyday life, his designs
characterised by a dedication to practicality and comfort. His furniture is not
only artistic and beautiful but also practical. Wegner said, “Many foreigners
have asked me how we made the Danish style, and I've answered that it was
rather a continuous process of purification, and for me of simplification, to cut
down to the simplest possible elements of four legs, a seat and combined top
rail and arm rest.” Wegner’s preferred method of working was to start with a
sketch from which he would make a 1:5 scale model followed by a full-scale
prototype. Before beginning production, each piece of furniture was drawn at
full scale on a single sheet with the drawings - two elevations and a plan view,

55
superimposed on one another. Wegner says, “A chair should allow freedom of
movement and accommodate more than one sitting position”.

Figure 12 Elbow chair by Hans Wegner

Throughout his long career, he has designed furniture extensively for

Johannes, Carl and Fritz Hansen. His furniture includes cabinets, tables and
other works, but his (almost) 200 chairs are what he is most remembered for
including more recently, airport seating. Wegner and other famous architects
and designers are all around the same age and in their heyday, inspired each
other to competition and excellence. Hans always looked to a new design
each year. For his work, the Royal Society of Arts, London made him an
Honorary Doctor in 1959. In 1992 he handed over his design studio to his
daughter Marianne who continues to look after his designs and follow in his
footsteps. Hans Wegner celebrated his 91st birthday on April 2nd 2005 and
still receives a royalty for every chair produced.
The factory

Finn Tang Thomsen of the Danish Institute of Technology introduced us to

director Knud Erik Hansen, the director of Carl Hansen and Son. The
company is 100 years old, and is Located in Aarup near Odense in Central
Denmark. The new 6,000 square metre complex was built to create an
environment planned to maintain traditional craftsmanship, modern
technology and pride in making what may be the most beautiful and sought
after chair designs in the World. Nowadays the production is entirely Hans
Wegner design and is sold in North America, Japan and throughout Europe.
Knud Erik previously managed a bedding factory and bought Carl Hansen and
Son from his brother who was not interested in expansion.

56
While the present factory in Aarup employs all the very latest technology, all
products are still made with attention to detail and traditional construction
methods by the long-time staff. Oak, Cherry and Walnut timbers are delivered
three times a day. The wood is steam bent as required, or machined in four
automatic “Zuckermann” copy lathes. All reject timbers are returned to the
supplier for credit. Sophisticated five axes CNC machines are used to shape
some complex components. Carl Hansen uses CNC machines because low-
technology countries are unable to compete against the repeatability and
consistent quality. The furniture designs are also very difficult to copy. As an
instance, the CH20 chair side, back and front rails are curved and meet at the
legs. Designed in 1956, it was believed to be too difficult to manufacture
economically until new technology came along.

No mechanical fixing is used on the product and all assembly is done with
traditional cabinet making joints such as dowels and mortice and tenons.
Some species such as Oak often move during the (glue) drying process so
the assemblies are held in specially made clamps until dry (Figure 13). A
significant part of the process is in sanding the product and some of this work
is done with computerised robots, almost human in their movements, sanding
complex shapes on a twenty-four hour a day schedule. Robots are becoming
more common in the European furniture industry and Denmark is a World
leader in robotic technologies through the Odense University College of
engineering’s “Robocluster”. Apart from this, the finishing of the product is
often outsourced because this process is very time-consuming. Before
sanding, all the parts are soaked in a solution of soap and water to raise the
grain; this results in a glossy, smooth finish that is a characteristic of the
product. The end of the process is the weaving room. Forty weavers weave
only eight chairs a day in a bright, spacious and quiet environment but are
penalised if they do more. The quality of finish is too important to risk.

Figure 13 Specially made clamps hold the chair until dry

57
“The design sells itself” is a lesson for all would-be designers and furniture
makers. Drawings from the 1940’s are still used in the modern factory.
Recently Marianne Wegner paid a visit to the company to check on the
designs. She observed that the CH24 chair back legs were not as her father
designed. Pulling out the drawings, Knud Erik asked what the problem was.
Marianne produced a drawing with a later date and modifications to the
design so production was stopped while alterations were made. Such is the
influence of the designer! Marianne is an accomplished furniture designer in
her own right and recently designed a table where no person sat near a leg.
The table was designed for the lucrative Japanese market but turned out to be
too big. No manufacturer can modify Wegner’s designs. This can only be
done in consultation with the designer. Minor modifications have been made
to some of the chairs for comfort and width. An extreme example is that over
the last twenty years Wegners chairs have been raised 20mm due to the
population getting taller. And what of the future of furniture design? Knud Erik
Hansen said that there are some good designers coming out of Italy that may
provide fresh, new and innovative furniture design.

Today, Carl Hansen produce four times the number of chairs they made four
years ago. Carl Hansen is 95% in the retail market while the namesake
(Republic of) Fritz Hansen is primarily contract and commercial. Knud says
that for Carl Hansen, relationships in business lead to new customers.
Progress has also been made partly due to the loyalty of their staff that
assists in the development of new product, often coming in unpaid over the
weekend to develop new processes. The high cost of the product makes
efficiency all that more important and plenty of time is devoted to ironing out
the wrinkles. Engineers are often employed to look at minor changes to the
design and manufacturing process in a continuous improvement schedule.
New technology is used to allow the company to expand, lowering costs and
maintaining quality. Knud says the company “Does not make much profit per
chair but we make a lot of chairs. We have made the same chairs for fifty-four
years! We ship worldwide at moisture content of eight percent and have less
than one percent breakage. Our future looks good and recently, at the Milan
fair we saw current trends are to steel, glass and plastics but we feel that
wood is coming back into fashion”. Fashion and good, useful design gives
Carl Hanson the winning edge.

The key issues from our visit to Carl Hansen were the company’s ability to
manufacture and market very expensive product using CNC machinery and
robotic material handling and feeding equipment. As the owner said, “we do
not make a lot of money on each chair, but we make a lot of chairs”. The
company works closely with well-known designers and produce a high-quality
product that is marketed well and much sought after Worldwide.

58
Sauer-Danfoss

This visit was organised by the Danish technological Institute. The company
produces electric motors. What were interesting were the lean manufacturing
systems adopted by this company. Any company can adopt lean
manufacturing, as the principles remain the same. The company is changing
from DC to AC motors and as part of the re-organisation within the production
line; lean manufacturing techniques were being implemented. A small group
of students from the Danish technological Institute were at the company doing
an on-site project that actually assisted the company in its endeavors. The
company view the production line as a value chain, and all work is designed
to take the same amount of time. Any task that takes longer is shortened so
there is no break in the production flow. CNC equipment frees up an operator
to participate in another task while the CNC is executing a program. Shift
reports look at what is ordered, what is made and cycle times. The report also
looks at what have been the problems.

At Sauer-Danfoss we saw a company that had moved to a ‘line -oriented”

production system. This means that the company has been able to speed up
production by reducing the bottlenecks created by the single workstation
system used before. If the flow of product stops for any reason there is a
problem and no lean manufacture. This type of production may be difficult in a
batch manufacturing situation such as furniture making.

59
Skiolo Mullerup

The visit to Skiolo was organised by the Danish technological Institute. Skiolo
manufacture farm machinery. The company had on-site, students from the
Danish Technological Institute doing a project on lean manufacturing.
Employees are encouraged to give the students ideas for improvement
(seems like the old TQM). A project board is used to show every employee
what is planned and to keep them informed of the progress. Project board
presents well with company logo and uniform look. The students were working
on systems to improve the production of a cow-cleaning machine. Part of the
equipment is shown in Figure 14.

Figure 14 Cow cleaning equipment at Skiolo Mullerup.

60
Berne University of Applied Sciences (HSB)

The Fachhochschule in Biel is part of Innovawood; this is an organisation that

was formed by organisations such as Euroligna. The University of Melbourne
Centre for Advanced Wood Processing is also part of Innovawood. The
school at Biel is concerned with wood engineering and architecture. The
ambition and mission of the Berne University of Applied Sciences is to be a
centre of excellence for teaching and applied research with both a national
and international reputation, and it wants to contribute to economic growth
and entrepreneurial dynamics in the region.

The facility has the following departments:

♦ The department of architecture, civil and wood engineering HSB.
♦ The department of technology and computer sciences.
♦ The department of economics and social work.
♦ The department of arts.
♦ The department of agronomy.
♦ The department of sports.

The Berne University of Applied Sciences has over 5000 students and 700
professors, some of them part-time. There are 113 students in the
Department of Wood Engineering at HSB (Biel). The Wood Technology
department at HSB prepares the students to take a leading position in the
wood industry. This education includes the development and fabrication of
wood products, planning of buildings and business management. The Swiss
education system is shown in Figure 15.

Figure 15 The Swiss education system

61
The University of Architecture, Civil and Wood Engineering (HSB) offers high
graduated studies in the fields of Architecture, Civil and Wood Engineering.
Architects, Civil and Wood Engineers carry out today a wide range of different
functions. These include the construction of houses, roads and bridges,
buildings to protect the landscapes as avalanches and water desasters,
calculation of the bearing capacity of building elements and coordination of
tools and materials. The teaching at HSB is directly linked to the national and
international market.

Research conducted at the facility is partly sponsored by industry and partly

by manufacturer associations and Government. Fields of study or research
designed to focus on the furniture industry are automation, tool development
including tool lifetime tests, and surface quality detection and rating.
Specifically, these programs are standardization of IT communication in the
furniture industry, Detection and rating of sanded wood surfaces,
Development of self regenerating sanding tool And supported automation. In
addition, a technology transfer program ensures that knowledge is passed
onto the industry at minimal cost. HSB has agreements for cooperation with
academic institutions in several countries worldwide, participates actively in
projects of the EU Framework programs, and is active in worldwide student
interchange.

The issues arising from our visit to the Berne University of Applied Sciences
was the relationship between education, industry and research. A research
base allows for students to be involved in the thinking and problem solving
process. Research, especially when related to Industry, allows a closer
interaction to the customer (industry). The University is currently involved in
testing wooden roofs for weather proofing, burglar-proofing in wooden
housing, robotic manufacture of windows and maintaining continual sanding
of machined components through specialised sanding machinery (Figure 16).

Figure 16 Continuous sanding machine and robotic window assembly

62
Wood Welding project, Berne University of Applied Sciences

A major research project of the Institute has been a study into wood welding.
The first part of the investigation has shown that the vibration welding
technology can be successfully used to connect large dimensions wood joints.
Moreover, the assembly stage of the wood joints is simplified and extremely
short (between 1.5 and 6 seconds) and the energy required to create the
connection is efficient, being directly applied in the joint. Consequently, the
welding process provides a well-tuned balance between the qualitative and
economical aspects of the industrial production.

After the technological study a first evaluation of the market confirmed that the
economical and technological potential of the new gluing process were
definitely high. As result of this analysis, various applications were
acknowledged. Due to its reliability and flexibility, the process can be easily
introduced into most parts of the wood industry working on the manufacture of
windows, doors, furniture and multi-layer parquet. Nevertheless, due to the
characteristics of the products and the trend of the market, the multi-layers
parquet industry was recognized as the main "target market". The results of
an investment / cost calculation, showed that the substitution of traditional
gluing processes with the new one could determine a considerable reduction
of the gluing and assembling phases costs (12% of cost reduction),
corresponding to a large increase of the corporate profits. According to the
positive outcomes of this study, the innovation was patented and the first
contacts with potential customers were taken.

63
Stuber

Stuber & Cie was an unusual visit in that it did not fit into our original scope. It
was, however of great general interest and a change from all the CNC
equipment. The company is located in Schupfen. Stuber employ fifty persons
and produce laminated beams and windows. In Europe, laminated beams are
used extensively for building. The company supplies by word of mouth and
services the local area (approximately a 30 kilometer radius). Only four mills
in Switzerland can produce beams at the lengths achieved at Stuber.
Relationships with designers and architects usually lead to orders. Some
cabinetry and double glazed windows are manufactured and parquetry floors
are produced. No unskilled labour is used and skills are highly regarded.

Figure 17 Stuber head office and beam manufacture

The company was started in the 1890’s and since 1926 has been a family
business. It is now a fourth generation business. The head office and
laminating press are shown in Figure 17. Species used are mostly pine
(beams) with some Beech, Oak and Maple. Unlike Aicher Holzhaus in Halfing,
(another German beam manufacturer) this company does not believe in
“moon wood”. Moon wood is timber cut at a certain phase of the moon, said to
improve its drying and other properties.

This company is small by beam manufacturing standards. A typical beam

manufacturer would produce in the region of 10,000 cubic metres per annum.
Stuber produce 3,000 cubic metres per annum. The company uses all its own
waste as heating for the factory and timber store. These get very cold during
the winter months. In the summer they send their waste to a particleboard
manufacturer. Beams can be as long as thirty metres in length! It was
reported that Swedish wood is better for this type of manufacture than Swiss
wood. Larch is also sourced from Siberia. The reasons given for the “better”
quality was the growth rings being closer together, giving the beams greater
strength. Bridges and buildings up to three stories high are made with
laminated wooden beams. Stables, stadiums, factories and gymnasiums are
also built using laminated beams from Stuber. Fifty-four metres without
support is the largest that Stuber has achieved. Their own association sets
standards for wooden beams. One of the professors from the Berner
Fachhochschule in Biel is the association’s quality controller. The beams are
closely monitored for moisture content and timber defects. www.stuber-
holz.ch

64
Fraubrunnen

Fraubrunnen produces
living and bedroom
furniture on a
commission basis. The
furniture is already sold
before it is produced.
The company employs
seventy persons. They
buy in many parts from
specialist manufacturers
and keep some small
amounts of stock items.
Approximately 2,000
parts are bought in
(including hinges, glass
and other fittings), and
1,000 parts are made at Fraubrunnen. All material used in the factory is pre-
cut prior to purchase; the company does not break down large sheets. The
management stated that “Pre-cut and drilled pieces are cost-effective, we
cannot do this any better ourselves and it would cost us more to produce. The
savings in capital equipment are significant.” The bought in pieces are not
directly edged with melamine or other material, they have been soft formed to
produce a seamless corner.

Figure 18 Fraubrunnen furniture and automated CNC technology

Fraubrunnen produce in Walnut, Maple and Beech and use a combination of

veneer and melamine surfaces. They use 120,000 square metres of veneer in
annually! The company has made good use of automated transfer systems and
CNC equipment in a rather congested environment. Unfortunately we were
unable to take photos in the factory (Figure 18) and scans from a brochure have
been reproduced for this report. Fraubrunnen use mostly German technology
including CNC equipment that is able to apply edges to the product on the CNC
machine. The company prefers to apply the edging as

65
soon as the product is cut as this eliminated moisture affecting the panel.
Training of operators is carried out at the machine supplier’s premises and
comprises one week of training for each CNC machine.

Fraubrunnen also use robotic spraying of components. About 1,000 square

metres of product are sprayed a week and each part is coated three times.
Sprayed product is oven-dried. Some three-dimensional parts are sprayed
manually. Utilising German and Italian assembly equipment does assembly.
Personal computers located throughout the factory are used to control the
flow of stock and keep track of orders. Lifting equipment and overhead
product transport equipment assists the workers to move product in the
crowded conditions. The company uses a fair percentage of Tamil workers,
prevalent in the area. These people came to Switzerland after a civil war
fifteen years ago and stayed on.

The Swiss work 42 hours a week and take four weeks holiday a year. If the
employee is less than twenty or more than fifty, an extra weeks holiday is
provided. There are six public holidays. By comparison, in France employees
work 36 hours a week.

We were able to view a large factory using much CNC equipment to produce
a range of different furniture designs in panel materials. We learnt that
outsourcing is common in European companies and everyone tries to produce
what they do best whilst outsourcing those products that are not so well made
by the company.

66
Fluck Werke,

Fluck Werke is located in Brienz, near Interlaken in Switzerland. The company

is renowned for its children’s furniture (Figure 19). The company has a
German CNC machining centre but what makes the company unique is its
use of robotics to feed the CNC machine. The company boasts 60,000
components in just 15 days! The uptake of robotics technology has enabled
the company to operate 24 hours a day and 7 days a week. In addition, only
20 employees are required to now work in the factory.

Figure 19 Fluck Werke Kinder furniture.

This company is a leading example of the use of robotics in furniture

manufacturing. Originally with a robotic spraying unit (8 years), the company has
spent three months setting up the system. The current robotic (machining)
installation has been operating for just two years. Of obvious concern was the
possibility of errors in manufacturing, especially when the workshop was
unmanned. The large development time was required to set in place safeguards
against processing errors. Should the system require attention, an SMS message
is automatically sent to the shop supervisor who will make the decision whether
or not to rectify the problem or leave it until the staff returns.

The use of robotics will not speed up production on a piece-by-piece basis.

The robot needs to position the piece against a stop, release the piece, which
is then pushed against the locating stop using air driven lineal actuators. In
certain cases the robot must place a piece on an angled rest, release the
piece that will then (by gravity) move onto a locating stop. The robot will then
pick up the piece a second time and position it on the machine table. In

67
addition, because of the lack of human intervention, the robot must also blow
away any wood chips that may have been left by the machining cycle. The
manager said, “Because the robot works all the time, you can afford to slow
down and get a better cut”. Our assessment of the product was that it was
extremely smooth with razor sharp edges.

What the robotic installation does is to spread the machining over the
maximum available time, in this case, 24/7. It is thought that the positioning
time will eventually be able to be reduced, in some part by the robotics
designers and in some part by the manufacturer. The company reports that
the CNC machine and the robot are both easy to program. The time spent is
in the little things, such as the gripper system, positioning of the workpieces
(accuracy), clamps and pneumatic positioning pushers that takes time to work
out.

The company produces kindergarten and library furniture. Stock is required in

advance due to the cyclic nature of the orders. This happens in August when
one third of the company’s turnaround is delivered. The director said, “Even a
small company can afford CNC and robotics due to the enormous savings
that can be made.” The company does not produce to a recognised standard.
The market sets the standard. The director stated that it would take a novice
company a year to fully set up a new robotic CNC machining installation.

Figure 20 Fluck Werke and Robotic installation

Fluck-Werke was a fascinating visit in that it showed what a small company

could do with robotics. Up until this visit we had not seen a robot working in an
industry CNC manufacturing situation. It was evident that while operators
would no longer be required in a future CNC manufacturing installation, the
ability of the technical staff would need to be improved. In addition, the ability
of technicians to integrate the CNC machine and robot controls to affect a
seamless dual-operation of the two pieces of equipment was paramount.

68
Schule fur Holzbildhauerei

The Swiss wood carving school was not an organised part of the tour, we just
happened upon the facility after our visit to Fluck Werke. The school is located
in Brienz and was just about to close when we arrived. Some photos are
provided below.

Figure 21 Swiss carving school, Brienz

The school fur wood sculpture in Brienz was founded in the year 1884, at that
time under the name “Schnitzlerschule Brienz”. Since 1928 it has been a
kantonate technical school and the only one in Switzerland, which offers
practical full time training for wood sculptors into the wood trades. Four full-
time instructors and a design teacher provide the training instructions. The
school offers a solid, traditional basic training. Occupation customer
instruction for master training and apprentices from all of Switzerland is
provided for wood sculpture.

69
Fachhochschule Rosenheim, Rosenheim, Germany (University of
Applied Sciences).

The University of Applied Sciences offers studies for wood technology, wood
building construction and extension, interior design as well as Master Degrees
in wood technology. Education combines high levels of theoretical knowledge
with applied practical work. The broad educational program includes industrial
engineering, business management and entrepreneurship besides wood
science. The product are the highly sought after Rosenheim wood engineers.
This reputation is based on a national and international network of
Universities and industrial partners that set demanding tasks that are resolved
in degree dissertations or research projects.

The Rosenheim Institute is Germany’s and arguably the World’s leading

Institute for technical education in the wood working industries. Similar in
scope to a similar school at Bad Wildungen (Germany), Rosenheim is larger
and blessed with a wider range of equipment provided mostly by machinery
and products manufacturers. A sawmill and tool shop; panel manufacturing
shop; machine shops; CNC workshops (Figure 22); CAD laboratories;
furniture testing laboratory; veneer and wood bending facilities are attended
by over 500 full-time students enrolled at the Institute.

Figure 22 CNC machining centre and Robot at Rosenheim Fachochschule

Rosenheim was founded in 1925 and has become the World’s leading facility
of its type. Saw milling in the local area was the reason it was first
established. A saw-milling museum in Rosenheim is a worthwhile visit and
recounts the history of saw milling in the area. The school contains and
engineers school and a master’s school. Recently the focus has been
changed to cover the whole field of woodworking. The facility also includes a

70
plastics program. In 1972 all the Polytechnics became Universities of applied
science and cover the whole range of education including dealing with
logistics and administration. In 1996 the wood house building was established
and now has 400 enrolled students. Franklin Wilbrink observed that the
course was focused to large manufacturers and changed to cater for small to
medium business. Industry was not very prepared to spend money on
training.

The school has an industry group to consult on the courses offered. No fees
are charged as the school is government funded. There are plans to introduce
fees in the future, as Germany is one of the last countries in Europe not to
charge its students. Other countries have more persons in need of education
but this is not free of cost. There is some pressure to earn private funds.
There is also some funding for research and development but if the school
takes in too much, there will be some taxation issues. A model would be to
set up a private company to handle this fee for service activities. The
workshops are not used for production, as this is a sensitive point with the
local industry. This is a similar situation to Australia.

The programs at Rosenheim are as flexible as possible. Every effort is made

to cater for individual needs. The final stage of a masters program is a
planned layout of an entire company; an example was a chair manufacturer to
complete 5,000 chairs a day. Production and all logistics is planned in a
theoretical situation.

Professor Scholz (Dean of school) stated “Engineers are needed in the wood
working industries to optimise the processes”. He said, “Half of the CNC
applications in Germany are ineffective due to lack of knowledge of the
equipment or the processes” and you “cannot produce low value products,
even with CNC technologies (to compete with low-cost imports)”. He said that
most wood working shops could use the potential of CNC machinery and
should look at moving from a low-value product to a high-value product base.
Companies should realise they cannot compete on a cost basis (Hungary’s
labour rates are presently 30% that of Germany). The tendency in Germany is
for larger, smarter companies to buy smaller, less-innovative companies.

Rosenheim’s CNC equipment includes CAD laboratories, three and four-axis

CNC machines, automatic furniture assembly machines and robotic handling
equipment. CNC training at Rosenheim is well advanced as can be seen in
the photo of student faces, scanned and carved using CNC technologies. The
training in CNC technologies includes measuring cutting forces and learning
about the interface between software and CNC equipment (What’s behind the
CNC program). Groups of six or seven students are most common for
workshop situations, larger groups are common for demonstrations and
theory classes. An interesting observation on one of the CAD room walls was
a quote attributed to Albert Einstein that read, “Imagination is more important
than knowledge”.

Other interesting comments were:

71
 ♦ Does innovation have to be an elusive quest?
♦ To invent is to innovate.
♦ Give me brain, vision, tools.
♦ I have theory. I need action.
♦ I cannot attack if I have the problems of the present.
♦ Strive for excellence, not just competence

German production is generally small job lots. There are some large
manufacturers such as Werndl Steelcase producing a million dollars worth of
stock a week, but in the main, companies are similar to Australian in size and
scope. The normal job lot is from 2 to 30 pieces. This means that flexible
CNC machinery is required.

72
Unifor, Turate (Como), Italy.

Unifor have an annual turnover of 270 million Euros. The company is

extensive and uses a large amount of CNC machinery and automated
processes. The company specialises in designer furniture using metal and
veneer boards as the primary material. Some veneer is actually laid on
aluminium and other metallic substrates! The company has outlets in Australia
and regards this country as a “big” market. Another major market is in Dubai.
The company has recently completed the Bloomberg offices in New York for
6,000 persons! Their local market share is rather small and 70% of product is
manufactured for export. One comment that we heard was that “In Italy, if you
want to build, you have to knock something down that has been there for
1,000 years!” Unifor has a partnership with Vitra chairs worldwide.

Unifor is a family company manufacturing office, kitchen and wall system

furniture. Unifor supplies equipment for its subcontractors and invests in their
future. The subcontractors are allowed to use this equipment for other uses
even though Unifor owns it. The company is moving away from solid timber in
almost all areas of its enterprise. Unifor is also moving away from
formaldehyde-based adhesives to zero emission adhesives. As this affects
the strength of the product, the company is moving more to steel in the
construction of product. The company specialises in forming for curved
construction (Figure 23).

Figure 23 Unifor product and form-work.

At Unifor, the supply of raw material appeared to dictate design. For example,
the manufacture of metal furniture covered with veneer or vinyl or other similar
materials formed the basis of some design. The material issue was followed
by the need for the design to accommodate a given number of computer
workstations. Unifor do not design and then market; they go into the market,
find out what the job is and then design for purpose. The construction is very
neat and detail is superb. Much attention is given to the detail of the finish.
Attention to detail is what sells the product. At Unifor, a product is never taken
out of production. It may not be in the current catalog but can always be built
for a new customer. Some of their designs are twenty years old and still being

73
manufactured. Often, the designers are freelance; one such person is
Michaela Diluci. The relationship with designers is very personal and often,
twelve months are required to realize a new design. Often, up to a hundred
mock-ups are required before a product is actually manufactured.

The strength of the product is an important selling point at Unifor. A round

table with a metal base was so solid that we could sit on the edge of the top
without it tipping over. The owner of the company (Piero Moltoni) is also the
head engineer and is very hands-on. He is not concerned with traditional
methods of construction; it’s what works that counts. Mostly, architects drive
designs and the trends are taken from here. From a marketing point of view,
the product between companies is very similar so lead (delivery) time is an
important factor in getting the sale. It is seen as critical to be on time and on
budget. “You cannot afford to make enemies,” says Craig Raison, our host. In
addition to this, it was reported that no one in the company cuts corners and
everything is done to the best of their abilities. Some excess stock is kept to
allow for sudden new orders; this is due to the complex construction used in
some of the curved constructions.

74
Outcomes of the fellowship
European countries have a high level of appreciation for training and
knowledge. Unlike Australia, it is almost impossible to get a job in a trade area
without a qualification. A high level of co-operation exists between their TAFE
equivalent and Industry. In Denmark for instance, Industry highly values
qualifications and foster high levels of skills. Students are provided with
substantial income support while training. A high staff to student ratio also
assists with good training regimes. Their pre-apprenticeship programs differ to
Australia in that the students do a range of subjects that enable them to
choose different career options at the completion of the course. There exists
the means for students to leave and re-enter the education system. Young
people are well catered for educationally. The country supports this with
higher taxes, but the public sees where this is being well used and accepts
this.

This situation is almost the opposite in Australia. In this country we value

education but are not prepared to pay for it. Industry no longer places
apprentices in the numbers it did ten or more years ago. On the other hand,
manufacturers will tell you that they are unable to attract young school leavers
into the trades with the same ease of the last decade. Young persons are not
attracted into any of the “factory” trades and government views that “the
longer a young person stays in school, the better chance they have of finding
employment” are seriously affecting the traditional trade “pool”.

The fellows are now in a stronger position to provide more meaningful training
on CNC manufacturing. The experience has been invaluable in providing a
snapshot of our immediate future. Many countries are facing the same issues
as us. In Denmark for example, the country has a population smaller than
ours, yet produces a third of the World’s mobile phones. In the furniture
industry, manufacturers sell leading designs around the World. The perceived
“threat” from China and other low labour cost countries is being met with
quality and design.

The participants are now in a position to implement the mentor study

communication pathway shown in Figure 1. This has begun with four
meetings a year in various TAFE Institutes around Victoria. Visits from
suppliers have been organised, and advice and information is being
disseminated via our website at www.camtag.org.au where the minutes of
recent meetings can be viewed.

75
Recommendations
Government

♦ Foster the value of the trades and encourage young people to enter the
trades’ areas, especially the furniture industry. The industry now has a
chronic shortage of skilled persons capable of using sophisticated
equipment in an effective manner.
♦ Provide financial or tax incentives to companies in endangered trade
areas (furnishing).
♦ Provide funding to relevant RTO’s to upgrade equipment and software.
The Victorian government has been generous in providing technology
grants to TAFE but this is not targeted and the RTO’s have set their
own priorities; this has not often included the furniture industry.
♦ Continue to support ISS study programs. Continue to support staff
development activities in RTO’s.
♦ Provide support and funding for programs to allow persons to re-enter
the industry. Many young persons leave the trades and never return;
some incentives could be provided to assist them to return.
♦ Support lean manufacturing initiatives; this could include lean
manufacturing training or incorporating lean manufacturing into existing
training packages. It was evident (in Europe) that lean manufacturing is
a way of becoming more competitive on both domestic and
international markets.
♦ Consider funding models to allow smaller groups (six or eight) for CNC
manufacturing training where (in almost every case) only one machine
is available (in the TAFE Institute) for training.

Industry

♦ Provide release for training in CNC, and design and manufacturing for
existing workers. Many existing workers have no formal training.
♦ Provide apprentice places for young school leavers and actively
promote the apprenticeship system in local secondary schools.
Promote the furnishing trade as one in which technology plays a part.
♦ With the introduction of CNC machinery and equipment and the ability
to hire casuals and process workers to operate these machines, most
companies should be able to look at employing a CNC “engineer” to
assist in the setting, programming and running of CNC equipment.
♦ Work with retailers to promote Australian product, Australian design
and Australian-made quality.
♦ Work with designers to produce unique Australian designs. Find out
what Australian design is. Do we have a design identity?
♦ Find a means of attracting Australian buyers to the furnishing product.
♦ Retailers must provide training for sales staff to identify Australian-
made quality, timbers and other issues affecting the consumer choice.
Very few furniture sales persons have any formal training in the
product.

76
 ♦ Produce a quality product; do not compete on price.
♦ Use technology and software to streamline the manufacturing process.
♦ Use high-performance tooling to raise machine feed speeds and
improve surface quality, reducing the need for sanding and re-work.
Training in cutting processes would raise awareness of quality issues
caused by low-performance tooling and poor housekeeping.
♦ A greater understanding of mechanical fixing, jig construction and part
holding would benefit Australian companies.
♦ Outsource work not in the immediate company’s area of expertise; this
keeps costs down and enables the company to concentrate on what it
does best.
♦ Introduce lean manufacturing principles. This includes focusing on
small batch sizes down to a batch size of one.

Professional Associations

♦ Work with industry and RTO’s to find a way of attracting more young
people into the trades.
♦ Work with industry and RTO’s to set up training programs in areas
such as furniture design, furniture design for CNC manufacture, and
CNC manufacturing.
♦ Provide information for the public domain on Australian timbers, design
and quality.

Suppliers

♦ Support RTO’s and teacher groups with up to date literature, training

materials etc. including videos and other relevant materials.
♦ Continue to support RTO’s with discounts on new machinery and
software.

Training providers

♦ Continue to provide high-quality training.

♦ Promote industrial release programs and support study tour initiatives.
♦ Allocate funding to technology areas for equipment, software and staff
training.
♦ Provide training and information seminars on new technologies and
existing skills shortage areas.
♦ Consider the provision of research and development activities for
industry.
♦ Allow further (industry, public) use of TAFE equipment, software and
teaching staff on a cost-recovery basis where this use does not conflict
with the TAFE charter.
♦ Consider funding models to allow smaller groups (six or eight) for CNC
manufacturing training where only one machine is available.

International Specialised Skills

77
♦ Continue to provide support for the furniture and design sectors.
♦ Assist and support the establishment of a specialist CNC
manufacturing and design centre at Holmesglen Institute.
♦ Consider allocating further study funds to CNC teaching staff to
improve knowledge of CNC manufacturing on an International level.
♦ Support the production of texts on CNC manufacturing and furniture
design and manufacturing. There are no modern recognised texts
covering these specific learning outcomes.

78
References

• Mo, J., Woodman, S., O’Brien, S., Nemes, L., Scudds, B., (2001).
Analysis of current production practices, stage 1 report. Furnishing
Industry Association of Australia; CSIRO; Department of Industry
Science and Resources.
• Susnjara, K.J. (1998). Furniture Manufacturing in the New Millennium.
(First edition). Thermwood Corporation, Indiana. ISBN 0-9665693-0-X
• Susnjara, K.J. (2000). The Furniture Fabrication Factory. (First edition).
Thermwood Corporation, Indiana. ISBN 0-9665693-2-6

79